Scribd
Upload
73 views2 pages

General Purpose Rectifier 1N5400-1N5408

This document provides specifications for a family of general purpose rectifier diodes rated from 50 to 1000 Volts. The 1N5400 through 1N5408 diodes feature low reverse leakage and forward voltage, with high forward surge current capacity. They are in plastic cases with epoxy and axial leads, and can be mounted in any position. The document provides maximum ratings for voltage, current and temperature, as well as typical characteristics like junction capacitance and thermal resistance.

Uploaded by

Marcelo Aparecido Dos Santos
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
73 views2 pages

General Purpose Rectifier 1N5400-1N5408

This document provides specifications for a family of general purpose rectifier diodes rated from 50 to 1000 Volts. The 1N5400 through 1N5408 diodes feature low reverse leakage and forward voltage, with high forward surge current capacity. They are in plastic cases with epoxy and axial leads, and can be mounted in any position. The document provides maximum ratings for voltage, current and temperature, as well as typical characteristics like junction capacitance and thermal resistance.

Uploaded by

Marcelo Aparecido Dos Santos
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

GENERAL PURPOSE RECTIFIER

1N5400 THRU 1N5408 VOLTAGE RANGE


CURRENT
50 to 1000 Volts
3.0 Ampere

FEATURES
• Low reverse leakage
• Low forward voltage
• High forward surge current capacity
• High temperature soldering guaranteed:
260 /10 seconds, 0.375” (9.5mm) lead length

MECHANICAL DATA
• Case: transfer molded plastic
• Epoxy: UL94V – 0 rate flame retardant
• Polarity: Color band denotes cathode end
• Lead: Plated axial lead, solderable per MIL-STD-202E
method 208C
• Mounting position: any
• Weight: 0.042 ounce, 1.19 gram
D0-27
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
• Ratings at 25OC ambient temperature unless otherwise specified
• Single Phase, half wave, 60Hz, resistive or inductive load
• For capacitive load derate current by 20%

SYMBOLS 1N5400 1N5401 1N5402 1N5404 1N5406 1N5407 1N5408 UNIT


Maximum Repetitive Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 Volts
Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 Volts
Maximum DC Blocking Voltage VDC 50 100 200 400 600 800 1000 Volts
Maximum Average Forward Rectified Current,
0.375” (9.5mm) lead length at TL =105OC I(AV) 3.0 Amps
Peak Forward Surge Current
8.3mS single half sine wave superimposed on IFSM 200 Amps
rated load (JEDEC method)
Maximum Instantaneous Forward Voltage @ 3.0A VF 1.0 Volts
Maximum DC Reverse Current at Rated TA = 25 OC 10.0
IR µA
DC Blocking Voltage per element TA = 150 OC 500
Maximum Full Load Reverse Current, full cycle
Average 0.375” (9.5mm) lead length at TL = 105 OC IR(AV) 500 µA
Typical Junction Capacitance
(Measured at 1.0MHz and applied reverse voltage of 4.0V) CJ 40 pF
O
Typical Thermal Resistance (Note 1) RθJA 30 C/W
O
Operating Junction Temperature Range TJ (-65 to +175) C
O
Storage Temperature Range TSTG (-65 to +175) C

Notes:
1. Thermal resistance from junction to ambient with 0.375” (9.5mm) lead length, PCB mounted with
0.8” x 0.8” (20mm x 200mm) copper pads

Sep-03, Rev A Micro Electronic Instrument Inc.


RATINGS AND CHARACTERISTIC CURVES 1N5400 THRU 1N5408

Sep-03, Rev A Micro Electronic Instrument Inc.

You might also like