Harvey Gulf International Marine
COMPETENCY PROFILE
Job Title: Engineer
DOT Code: 197.130-010
General Job Description:
Supervises, coordinates and participates in operating, maintaining and repairing
propulsion engines, boilers, deck machinery, electrical systems, refrigeration, and
sanitary equipment
Routinely inspects engines and other vessel equipment for service requirements
Directs and assists crew with repair or replace of defective parts and equipment
Performs temporary repairs to get vessel to port when problems arise
Starts engines to propel vessel, regulates engines and power transmission to control speed
Stands engine room watch during specified periods, observing that required water levels
are maintained in boilers, condensers, and evaporators
Ensures that load on generators is within acceptable limits, and that oil and grease cups
are kept full
Operates, supervises or assists in operating various vessel equipment
May be required to hold appropriate U.S. Coast Guard license, depending upon tonnage
of vessel, waters navigated, type of engine and means of transmitting power to propeller
shaft
Maintains engineering log
Repairs machinery, using hand tools and power tools
Performs other duties as deckhand, cook or oiler (see relevant job description for duties)
Tools and Equipment Used:
Hand tools, cleaning equipment and cooking utensils are used on occasion
Operates vessel equipment and machinery
Environmental Conditions:
Engine room is very hot, can go up to 140 degrees, usually between 125-130 degrees
Noise and vibration levels in engine room can be very high (must wear ear muffs)
Occasional presence of diesel fumes and exhaust fumes
Other hazards are hot machinery and potential of fire.
Created: 06/24/11 Controlled By: C.B. Rev: 03
Mobility Barriers:
Getting on and off boat: requires the individual to combine twisting, bending, stooping,
jumping, squatting, climbing, balancing and swinging due to potential wave action
Good upper and lower body strength is required
Steep, narrow, one person stairwells throughout the vessel
Hours Worked:
Offshore schedule: 28 days on and 14 days off (flexible)
Offshore shift: Shifts vary, but may be up to twelve (12) hours on, and twelve (12) hours
off
Physical Demands:
Frequent lifting and/or carrying of objects up to 50 lbs.
Occasional lifting and/or carrying of objects with help in excess of 50 lbs.
Occasional climbing, balancing, stooping and crouching (climbing and descending stairs,
climbing on machinery and equipment, chipping, painting, confined space entry, etc)
Frequent reaching and handling of radios, spotlights, switches, levers and cables.
Must have a clear voice and hearing
Vision Requirements:
Frequently uses near vision to read manuals, reports and troubleshooting equipment
Frequently uses far vision to see landmarks and oncoming vessels
Frequently uses depth perception to judge distance
Frequently uses wide field of vision to be aware
Pushing and Pulling Tasks:
Opening and closing valves, wheels and levers
Loosening and tightening bolts
Pushes and pulls entry doors
Pushes and pulls equipment housings and hatches
Pushes and pulls deck lines
Standing and Walking Tasks:
Inspects gauges and takes temperature reading regularly
Walking around for 5 to 10 minutes each time inspections are made
Stands to work on engine frequently
Majority of time walking in engine room and climbing stairs
Created: 06/24/11 Controlled By: C.B. Rev: 03
Bending and Twisting Tasks:
Bends and twists to pick up and use tools
Cleans bilge strainers and clean bilge
Maneuvers around pipes, machinery, equipment, etc.
Changes pipes and fixes circuit boards, switches, exhaust leaks, etc
Must bend and twist to get into and out of tight places for doing repairs
Kneeling and Squatting Tasks:
Inspects for leaks on engine
turns valves, checks gauges, crank cases, checks bearings, etc
equipment repair may require long periods in awkward positions
Work Surface:
Smooth tile floor, steel decks and stairs.
SKILLS
Reasoning Development:
Must apply principles of logical or scientific thinking to a wide range of problems
Must deal with nonverbal symbolism (graphs etc) in their most difficult phases
Must deal with a variety of abstract and concrete variables.
Mathematics Development:
Must be able to calculate surfaces, volumes, weights, measures, circumferences and areas
Must understand kinds of angles, and properties of pairs and angles
Must be able to add, subtract, multiply and divide, with use of decimals and percentages
Reading and Writing Tasks:
Must be able to read rules, regulations and maps
Must be able to read safety signs, warnings and instructions
Must read safety rules, warnings and instructions for tools, machinery and equipment
Must write reports with proper format, punctuation, spelling and grammar, etc
Must maintain engine logs and accurately keep maintenance records on various
equipment
Must be able to write instructions
Created: 06/24/11 Controlled By: C.B. Rev: 03
Speaking:
Must speak fluent English
Must be able to effectively communicate with supervisors and crew including over radio,
using appropriate poise, and voice control and voice modulation
Mental Involvement:
Must have good mental recollection of numerous vessel details
Must make inspection rounds regularly
Must be alert for any unusual sounds or smells around the vessel
Must be able to work under pressure to complete repairs safely
Extreme concentration is required when the weather is rough
Extreme concentration is required when working in confined areas
Extreme concentration is required when working in close proximity of hot equipment
Extreme concentration is required when working in close proximity of electrical panels
and electrical equipment
Extreme concentration is required when working in close proximity of flammable and/or
hazardous materials
Human Relations Tasks:
Supervises and directs oiler, when applicable
Must take supervision from Master and corporate office
Primarily works independently most of the time but must be a part of the vessel team
Must be able to influence people, make judgments, supervise, perform under stress
Must be able to get along with crew in tight quarters for extended periods of time
Must be able to work with crew when performing deckhand, cook or oiler duties
EDUCATION AND/OR LICENSING
Minimum Requirements
must possess the following valid USCG documentation:
o License with minimum rating of:
Designated Duty Engineer of at least 4000 hp and 3000 ITC tonnage)
Chief Engineer of at least 4000 hp and 3000 ITC tonnage
o STCW-95 with "officer in charge of an engineering watch" endorsement
o MMD (Z-Card)
valid Transportation Worker Identification Credential (TWIC)
high school diploma preferred but not required
Created: 06/24/11 Controlled By: C.B. Rev: 03
TRAINING
o STCW-95 with "officer in charge of an engineering watch" endorsement
EXPERIENCE
Minimum of 6 months in this capacity
Created: 06/24/11 Controlled By: C.B. Rev: 03
