Scribd
Upload
346 views4 pages

Vehicle Speed Limiter System Overview

The Vehicle Speed Limiter Project uses RF communication between speed sign posts and a vehicle's controller system to automatically limit a vehicle's speed based on the posted limit. When a vehicle comes within range of a sign post, it transmits the speed limit to the vehicle's receiver. If the vehicle's speed exceeds the limit, the controller will restrict the speed to the posted limit until out of range of the sign post, helping to curb speeding and improve road safety.

Uploaded by

Sai Santosh Kumar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
346 views4 pages

Vehicle Speed Limiter System Overview

The Vehicle Speed Limiter Project uses RF communication between speed sign posts and a vehicle's controller system to automatically limit a vehicle's speed based on the posted limit. When a vehicle comes within range of a sign post, it transmits the speed limit to the vehicle's receiver. If the vehicle's speed exceeds the limit, the controller will restrict the speed to the posted limit until out of range of the sign post, helping to curb speeding and improve road safety.

Uploaded by

Sai Santosh Kumar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd

Vehicle Speed Limiter Project

Over speeding vehicle make lot of nuisance sometimes also leading to loss of lives
and other damages. Also imposing speed restrictions through sign boards have
been rendered fruitless wherein the vehicle drivers do not comply with it and
resulting catastrophic. Vehicle Speed Limit Controller Project is a great solution to
this problem as it not only provides speed limitations, it also implements it
through a controlling mechanism. The project works with RF communication
between the speed sign post and the vehicle controller system. A motor is used
here to depict as a vehicle. Whenever a vehicle comes in range of the RF speed
sign post, the sign post transmits the speed limit for that particular road to the
vehicle system. The vehicle controller system receives this signal through RF
receiver and further perceived by the microcontroller. The speed of the vehicle
can be incremented / decremented manually with the help of push buttons. If the
system was at lower speed than the limit received from the sign post than there
will be no changes made to the speed of the system. However, if the speed of the
vehicle was manually incremented to a higher value, then the controller will
impose the speed restriction and bring back the speed value to the value specified
by the limit. Now if the user tries to increase the speed, the system does not
allows it to do so till it is in range of the RF speed sign post. The speed of the
vehicle and the limits are displayed on an LCD. Thus this system greatly helps in
curbing the speed of over speeding vehicles ensuring safety of vehicles on
accident prone road ways.

Block Diagram :
Hardware Specifications
 RF Module Transmitter
 9V Battery
 Diode
 Encoder
 Antenna
 Switch
 Transformer
 Rectifier
 Regulator
 LCD
 RF Receiver
 Decoder
 Atmega Microcontroller
 Motor Driver IC
 DC Motor

Software Specifications
 Arduino Compiler
 MC Programming Language: C

You might also like