RSD/RCD/RCT Series
Coarse/Fine Bubble Aeration Diffuser
RSD/RCD
Fine Bubble Disc Diffuser
Specification
Flow rate Design flow Pressure Check Range Service Pores Bubble Max. Connector Weight
Model
(m3/hr) (m3/hr) loss (Pa) valve depth (m) area (m2) quantity size (mm) Temp. threaded (kg)
RSD245 1 – 7.2 2.0 – 6.0 2000 – 4800 0.5 6500 0.6
***N/A
RSD330 1 – 12 4.0 – 8.5 3800 – 6300 0.8 12500 0.85
1.5 – 7.0 1–3 100 °C 3/4” NPT
RCD245 1 – 7.2 2.0 – 6.0 2800 – 5500 0.5 6500 0.75
Included
RCD330 1 – 12 4.0 – 8.5 4300 – 6800 0.8 12500 0.95
Features Application
High Oxygen Transmission Efficiency (OTE) with a large number of identical Aeration
diameter slits (pores) on EPDM membrane producing tiny air bubbles of an SBR reaction basin
average 1-3 mm, thus provide power saving efficiency and low operation cost. Sludge activated process
Excellent back flow prevention with check valve to avoid clogging and sewage Wastewater treatment process
water to entering into aerator pipe line when air transmission is shut (also
Denitrification aerobic process
available with non-check valve).
Equipped with EPDM membrane with high tensile strength, anti-tearing, and Aquafarm and other aeration
non- deformability. The membranes surface are overspread with over 6500 to application
12500 of micro pores. While operating, the bubbles are rise in a form of spiral
whirlpool, thus provide the self-cleaning ability for the membranes as well as
extended long service life.
Unique seal ring provide a maximum tight sealing between diffuser base and
membrane washer.
PVC Soft connector for installation with pipe line also available as optional
accessories.
Construction
Dimension - A (mm)
A RSD245 RSD330 RCD245 RCD330
266 348 265 350
Material
Model
No. Description
RSD245 RSD330 RCD245 RCD330
1. Retaining ring *PP *PP *PP *PP
2. Membrane **EPDM **EPDM **EPDM **EPDM
3. Check valve ***N/A ***N/A **EPDM+*PP **EPDM+*PP
4. Disc *PP *PP *PP *PP
*Polypropylene **Ethylene Propylene Diene Monomer *** Not applicable
1
RSD/RCD
Model: 245 Model: 330
RCD 245 RSD 245 RSD 330 RCD 330
(Check valve) (Non-check valve) (Non-check valve) (Check valve)
Performance Curve
Head Loss Curve (245) Head Loss Curve (330)
RCD 245 RCD 330
RSD 245 RSD 330
OTE Curve (245) OTE Curve (330)
Soft Connector
Ø 32 (Outer dia.)
Oversized pin of Ø 37 Clockwise threaded
mm and curve designed for attaching with
body to provide more the diffuser.
secure when installing to
the pipeline.
Adaptor size Threaded Dia. Material
Ø32 mm x 5 mm 1” NTP (Male) PVC*
*Polyvinyl Chloride
2
RSD/RCD
Installation with Soft Connector
Pipe Diffuser
Soft Connector
1. Drill a hole of 32 mm diameter. 2. Place the connector into the
drilled pipe hole.*
>50 cm (recommended)
3. Press and rotate (clockwise) the 4. Tightly winding the diffuser by
diffuser into the connector. hand and tool when it reach 80%
fully fit.
*It is recommended to apply a silicone glue between the connector and the pipe hole for more stable adhesive.
Moister Purge System
As air temperature become higher after compressed by the heat blast of the blower (approximately up to 50 c°), the accumulation
of water or liquid will occur inside the aeration pipeline, thus decreasing of oxygen transfer rate and clogging of diffuser’s micro
pores. In order to prevent these issue, the moisture purge system can provided the benefit of discharging condensed wastewater
and liquid from the aeration pipeline which might entered into the pipe by accumulated or when the blower shut off.
Figure 1. Moister Purge System
3
RSD
Coarse Bubble Disc Diffuser
Specification
Model Material Connector threaded Flow rate OTE Head loss Weight (kg)
-Rubber cap: PU* 12 – 24 17% @Water
RSD 144 1” NTP (Male) 1550 Pa @ 15 m3/hr 0.13
-Main body: ABS** m3/hr depth 4 m
Features Application
Special design structure to prevent water back-flow during air flow Aeration
interruptions. Wastewater treatment
Main body made of high quality ABS material with heat resistance and softening Sludge activated process
temperature prevention. Purify water treatment process
Polyurethane membrane offers a durability protection from corrosion, weather,
Mixing application
oil, and deformation.
Equalization process
Adjustable discharge hole for different air volume, which decreases the pressure
loss and prevent clogged as well as low maintenance.
Easy installation with capability to install in upwards or downwards position.
Construction
NTP 1” (Male)
PU
(*Polyurethane)
ABS
(**Acrylonitrile
Butadiene Styrene)
Head Loss Curve OTE Curve
Headloss (Pa)
OTE %
4
RCT
Fine Bubble Tube Diffuser
Specification
Description / Model RCT300 RCT600 RCT1000
Membranes sleeve EPDM (Ethylene Propylene Diene Monomer)
Material :
Supported tube Hard ABS, Open-end designed for buoyancy force minimize.
Diameter x Perforation length 63 mm × 300 mm 63 mm × 600 mm 63 mm × 1000 mm
Connector-air inlet threaded R.3/4” PT, Female
Flow rate : Best continuous operation 10 ~ 80 L/min 30 ~ 250 L/min 50 ~ 320 L/min
Bubble size 1 – 3 mm
Weight 0.45 kg 0.9 1.5 kg
kg
Features
RCT Tube Diffuser equipped with compression molded EPDM membranes, able to endure against
an ultraviolet degradation or chemical corruption.
Hollow type tube designed allow for maximum strength at a minimum positive buoyancy.
Tube inlet distributor is designed for all in one injection.
The supported tube are made of ABS material.
Membranes are directly fixed by stainless steel (SUS304) clamp on the tube.
5
RCT
Application Advantages
Municipal sewage treatment process High oxygen transfer efficiency with low head loss.
Industrial wastewater treatment process Self-cleaning ability and good seal to prevent water from enter into
Purify water treatment process the pipeline.
Ozone diffuser application High service area and low power consumption to provide
Sludge stabilization process cost efficiency.
Aquafarm High tensile strength EPDM membrane material with non-
deformability for long-term operation of diffuser.
Easy installation with ABS adaptor which can be assembly onto pipe
without using any special tools.
OTE Curve Head Loss Curve
Efficiency (%) @ 1 m depth range
Tube Diffuser Adaptor Hammer the wedge to
lock the clamp tight.
Clamp Adaptors
Hook lock design clamp.
Locking Wedge
Ø 90
Model Size Threaded Dia. Material
CLM-02 Ø90 mm x 4 mm 3/4" (PT) ABS*
*Acrylonitrile Butadiene Styrene
6
TP. 2017
