Scribd
Upload
384 views1 page

Common Rail Injectors Repairing Table: MM Bar M M M NM NM NM NM

The document provides specifications for repairing common rail injectors, including measurements for needle lift, nozzle spring force, armature lift, over lift, and airgap. It also lists torque specifications for internal screws, inlet connections, solenoids, nozzle nuts, and other components. The table contains the reference, type, brand, and customer for the injectors as well as notes on the temperature and release date.

Uploaded by

akhmed
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
384 views1 page

Common Rail Injectors Repairing Table: MM Bar M M M NM NM NM NM

The document provides specifications for repairing common rail injectors, including measurements for needle lift, nozzle spring force, armature lift, over lift, and airgap. It also lists torque specifications for internal screws, inlet connections, solenoids, nozzle nuts, and other components. The table contains the reference, type, brand, and customer for the injectors as well as notes on the temperature and release date.

Uploaded by

akhmed
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
  • Common Rail Injectors Repairing Table: Presents a detailed table of parameters and specifications for common rail injectors used in repairing processes.

OK

COMMON RAIL INJECTORS REPAIRING TABLE


A REFERENCE 0445120011
B TYPE crin 1
C BRAND Bosch
D CUSTOMER IVECO
E BALL TYPE
F LAPPING TOOL B

G NEEDLE LIFT 0,21 ± 0,01 mm


H NOZZLE SPRING FORCE 4,2 ± 0,2 bar
I ARMATURE LIFT 52 ± 3 µm
J OVER LIFT 100 ± 20 µm
K AIRGAP 70 ± 20 µm

L INTERNAL SCREW Torque 55 ± 5 Nm


M INLET CONNECTION Torque 45 ± 5 Nm
N SOLENOID SCREW Torque 30 - 35 Nm
Giuditta SCREW Torque
O 30 Nm
for DISASSEMBLING
Giuditta SCREW Torque
P 25 Nm
for ASSEMBLING

Q NOZZLE NUT PRETIGHTETING 50 Nm


R LOOSE NOZZLE NUT -90°

S NOZZLE NUT PRETIGHTETING 15 Nm


T NOZZLE NUT TIGHTENING 46° ± 5°
CHECK NOZZLE NUT RANGE
U 48- 65 Nm
Torque
NOTES: TEMPERATURE 20° C RELEASE: 2012-01-13-11-37-25

ELEKTROMECHANIKA DIESEL OSOWSKI JACEK elektromechanikaosowski@[Link] 02.23.0402

26/06/2012-22.51

You might also like