Scribd
Upload
23 views1 page

Theory-5.6.18

The document discusses VPN protocols PPP and PPPoE, including how to manually change a Cisco serial port encapsulation to PPP, how PPP allows different vendor routers to connect with authentication, and configuration examples for enabling PPPoE on an interface and accepting dial-in connections in a VPDN group using PPPoE.

Uploaded by

THULASI
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
23 views1 page

Theory-5.6.18

The document discusses VPN protocols PPP and PPPoE, including how to manually change a Cisco serial port encapsulation to PPP, how PPP allows different vendor routers to connect with authentication, and configuration examples for enabling PPPoE on an interface and accepting dial-in connections in a VPDN group using PPPoE.

Uploaded by

THULASI
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
You are on page 1/ 1

VPN

PPP

serial port of cisco:

default encapsulation: HDLC


manually change to PPP.

open standard.

purpose:

1. different vendor routers serial link can be enabled with PPP.

2. Datalink can be enabled with proper authenticated data. ( username and


password )

PPPoe

interface gigabitethernet 0/0


no shutdown
ip address 29.29.39.1 255.255.255.0
pppoe enable

exit

vpdn enable
vpdn-group mygroup

accept-dialin

protocol pppoe

interface virtual-template 1
ip unnumbered gigabitethernet 0/0
ppp authentication chap
peer default ip address pool LPOOL

ip local pool LPOOL 29.29.39.100 29.29.39.150

You might also like