Scribd
Upload
478 views3 pages

Types and Properties of Fertilizers

Fertilizer is any material added to soil to supply plant nutrients. Fertilizers are classified as straight, complex, or mixed based on the number of primary nutrients (nitrogen, phosphorus, potassium) contained. They also take various physical forms including powders, crystals, prills, granules, and briquettes. Common nitrogenous fertilizers include urea, ammonium sulfate, and sodium nitrate. Phosphatic fertilizers include super phosphate and triple super phosphate. Potassic fertilizers include potassium chloride and potassium sulfate. Fertilizer grade indicates the minimum percentage of NPK contained. Physical properties like moisture content and chemical properties determine fertilizer selection and use.

Uploaded by

prem abishek
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
478 views3 pages

Types and Properties of Fertilizers

Fertilizer is any material added to soil to supply plant nutrients. Fertilizers are classified as straight, complex, or mixed based on the number of primary nutrients (nitrogen, phosphorus, potassium) contained. They also take various physical forms including powders, crystals, prills, granules, and briquettes. Common nitrogenous fertilizers include urea, ammonium sulfate, and sodium nitrate. Phosphatic fertilizers include super phosphate and triple super phosphate. Potassic fertilizers include potassium chloride and potassium sulfate. Fertilizer grade indicates the minimum percentage of NPK contained. Physical properties like moisture content and chemical properties determine fertilizer selection and use.

Uploaded by

prem abishek
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd

FERTILIZER

Fertilizer is any material of natural or synthetic origin added to the soil to supply one or more plant
nutrients.

CLASSIFICATION OF FERTILISERS

Fertilisers

1. Straight fertilizers: Straight fertilizers are those which supply only one primary plant nutrient, namely
nitrogen or phosphorus or potassium.
eg. Urea, ammonium sulphate, potassium chloride and potassium sulphate.

2. Complex fertilizers: Complex fertilizers contain two or three primary plant nutrients of which two
primary nutrients are in chemical combination. These fertilisers are usually produced in granular form.
eg. Diammonium phosphate, nitrophosphates and ammonium phosphate.

3. Mixed fertilizers: are physical mixtures of straight fertilisers. They contain two or three primary plant
nutrients. Mixed fertilisers are made by thoroughly mixing the ingredients either mechanically or manually.
Fertilisers can also be classified based on physical form:

1. Solid
2. Liquid fertilizers

Fertilizer

Solid fertilizers are in several forms viz.

1. Powder (single superphosphate),


2. Crystals (ammonium sulphate),
3. Prills (urea, diammonium phosphate, superphosphate),
4. Granules (Holland granules),
5. Supergranules (urea supergranules) and
6. Briquettes (urea briquettes).

Urea prills Granulated urea Ammonium sulphate


Liquid fertilizers:

1. Liquid form fertilizers are applied with irrigation water or for direct application.
2. Ease of handling, less labour requirement and possibility of mixing with herbicides have made the
liquid fertilisers more acceptable to farmers.

Fertilizer

Nitrogenous fertilizer

Ammoniacal Nitrate Ammoniacal and Amide fertilizer


Nitrate
1. Ammonium 1. Sodium 1. Ammonium 1. Urea
Sulphate Nitrate Nitrate 2. Calcium
2. Ammonium 2. Calcium 2. Calcium Cynamide
chloride Nitrate Ammonium
3. Anhydrous 3. Potassium Nitrate
ammonia Nitrate 3. Ammonium
Sulphate
Nitrate

Phosphatic fertilizers

Super phosphate [Ca (H2PO4)2) Triple super phosphate:

Potassic fertilizers ) Potassium chloride (KCI) Potassium sulphate (K2S04)

Secondary major-nutrient fertilizers

Magnesium Sulphate (MgSO4) Calcium Chloride (CaCl2 6H2O) Sulphate Fertilizers

Ferrous sulphate
(FeSO4 7H2O) Manganous Sulphate ( MnSO4 7H2O)

Mn – chelates (Mn – DTA) Fe-EDTA


Fe-EDDPA

Zinc sulphate
(ZnSO4 7H2O) Zinc-oxide(ZnO) Borax (Na2B4O 10H2O) Boric acid (H3BO3)
Copper fertilizers have been used to correct copper (Cu), deficiencies.
Copper sulphate (CuSO4 5H2O) – 25 % Cu
Copper sulphate (CuSO4 H2O) – 36 % Cu

Sodium molybdate (Na2MoO42H2O) Ammonium molybdate (NH4)6Mo7O244H2O)

Fertiliser Grade

1. Fertiliser grade refers to the guaranteed minimum percentage of nitrogen (N), phosphorus (P)
and potash (K) contained in fertiliser material.
2. The numbers representing the grade are separated by hyphens and are always stated in the
sequence of N, P, and

For example, label on the fertilizer bag with a grade 28-28-0 indicates that 100 kg of fertiliser material
contains 28 kg of N, 28 kg of P and no potash.

1. Different grades of fertilisers are available in India.

Some of them are:


28-28-0
20-20-0
14-35-14
17-17-17
14-28-14 etc.

FERTILIZERRATIO

It refers to the ratio of the percentage of N, P2O5 and K2O in the fertilizer mixture e.g., the fertilizer grade
12-6-6 has a fertilizer ratio of [Link].

Physical properties of fertilizers:


Physical properties of fertilizers have bearing on bagging storage, transportation, handling, and
application. They are properties include – hygroscopic nature, free moisture content, particle
size, melting point, solubility, specific gravity, segregation, granule hardness, angle of response,
drillability etc.,
Chemical properties of fertilizers:
Chemical properties include the nature and amount of nutrients present, associated elements,
their chemical reaction, and salt index. These make a basis for their selection by the cultivators
so that they may achieve highest productivity with least damage to soil fertility and least unit
cost of fertilizers.

You might also like