Scribd
Upload
634 views2 pages

Safety in Manufacturing: Ergonomics: Awkward Postures

This document discusses ergonomic risks from awkward postures in manufacturing workplaces. It identifies risk factors such as reaching, bending, twisting, and kneeling that can contribute to injuries. The document recommends limits of two hours per shift for activities involving the hands/arms held above shoulder level, neck bent more than 30 degrees, back bent more than 30 degrees, and kneeling. It provides short-term and long-term controls to prevent injuries, such as changing workstation layouts, providing adjustable equipment, power tools, and training workers on neutral ranges of motion.

Uploaded by

prashanth
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
634 views2 pages

Safety in Manufacturing: Ergonomics: Awkward Postures

This document discusses ergonomic risks from awkward postures in manufacturing workplaces. It identifies risk factors such as reaching, bending, twisting, and kneeling that can contribute to injuries. The document recommends limits of two hours per shift for activities involving the hands/arms held above shoulder level, neck bent more than 30 degrees, back bent more than 30 degrees, and kneeling. It provides short-term and long-term controls to prevent injuries, such as changing workstation layouts, providing adjustable equipment, power tools, and training workers on neutral ranges of motion.

Uploaded by

prashanth
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

SAFETY IN MANUFACTURING

Ergonomics: Awkward Postures


If you see risks like this in your workplace, they need to be controlled.
Recommended limits are on page two of this document.
RISK FACTORS CONTRIBUTING FACTORS
Reaching
• Deep work surfaces
• Overhead work surfaces
• Limited work spaces
• Hard-to-reach storage areas
• Working at ground level
Forward Upward
Upward
Forwa rd S Sideways
ideway
Bending • Large, awkward boxes
• Low-level storage

Twisting • Working at ground level

• Hard-to-reach storage bins


• Using non-powered hand tools
• Restricted workspace — limited access to
equipment, machinery, and materials
• Poor workstation layout  — location of
equipment, machinery, and materials in
relation to how the job is performed
• Keeping feet in one place instead of turning
entire body

Kneeling continuously • Working at ground level


• Hard kneeling surface
• No comfortable knee pads
• Poor workplace layout

Graphics courtesy of the Canadian Centre for Occupational Health and Safety & Victorian WorkCover
Authority Code of Practice for Manual Handling (No. 25, 2000) www.workcover.vic.gov.au
Recommended Limits

Hands and arms Knees


Limit awkward postures (holding hands Limit kneeling to two hours total
above the head or elbows above the per shift.
shoulders) to two hours total per shift.

Neck Back
Limit working with the neck bent more Limit working with the back bent
than 30° in any direction to two hours more than 30° in any direction to two
total per shift. hours total per shift.

Controls for injury prevention


Short-term
1. Change workstation layout to minimize twisting.
2. Raise or lower work surfaces and storage spaces to eliminate or minimize reaching, bending, and kneeling.
3. Provide proper seating, such as stools, for low level or kneeling work.
4. Provide comfortable knee pads for workers who work in kneeling positions.

Long-term
1. Provide powered hand tools instead of manual tools.
2. Make sure new equipment and machinery are adjustable to allow for changing work practices and
products.
3. Teach workers how to work within neutral ranges of motion.
4. Make sure new equipment and machinery are within easy reach for all workers, including maintenance
staff.

Reviewed by the Joint Health and Safety Committee or Safety Representative Date ____________

You might also like