Validate Print Help Percentage BoQ

Tender Inviting Authority: Executive officer, Bangaljhi,Chapra , Nadia

Name of Work: Construction of ACR with Furniture of Islamganj High Madrasa at Bangaljhi within Chapra Bock area under MSDP for the year 2017-
2018.

Contract No: WBNADIA/CHAPRA//2017-2018. Memo No.:-/EO/CPS. Dated:-/02/2018 Sl No.:-

Bidder
Name :

PRICE SCHEDULE
(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is
liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )

NUMBER TEXT # NUMBER # TEXT # NUMBER NUMBER #

#
Sl. Item Description Quantity Units Estimated TOTAL
No. Rate AMOUNT
Without Taxes
1 2 4 5 6 53
1.00 Earthwork in excavation of foundation trenches or drains, in 59.520 Cum 119.27 #VALUE!
all sorts of soil(including mixed soil but excluding laterite or
sand stone) including removing, spreading or stacking the
spoils within a lead of 75m as directed. The item includes
necessary trimming the sides of trenches, leveling, dressing &
ramming the bottom, bailing out water as required complete.

2.00 Earthwork in filling in foundation trenches or plinth with good 11.900 Cum 77.54 #VALUE!
earth, in layers not exceeding 15 cm. including watering and
ramming etc layer by layer complete.( Payment to be made on
the basis of measurement of finished quantity of work.)a) In
Foundation with earth obtained from excavation of foundation.
3.00 With earth obtained by fresh excavation (including cost of 43.370 Cum 137.18 #VALUE!
excavation upto 1,800 mm. depth) from land arranged by the
Deptt. within a lead of 100 m
4.00 Filling in foundation or plinth by silver sand inlayers not 4.830 Cum 655.71 #VALUE!
exceeding 150 mm as directed and consolidating the same by
thorough saturation withwater, ramming complete including
the cost of supplyof sand. (payment to be made on
measurement offinished quantity)

5.00 Single Brick Flat Soling of picked jhama bricks including 142.150 Sqm 325.00 #VALUE!
ramming and dressing bed to proper level and filling joints with
local sand.
6.00 Cement concrete with graded Stone ballast (30 mm 3.920 Cum 4247.00 #VALUE!
size)excluding shutteringIn ground floor and foundation.
(a) 1:3:6 proportion
7.00 25mm. thick damp proof course with cement concrete 9.600 sqm 188.00 #VALUE!
withstone chips (1:1.5:3) [with graded stone aggregate 10 mm
nominal size] and admixture of water proofing compound
asper manufacturer's specification followed by two coat
ofpolymer based paint, (1st coat after 4 to 5 days of
concretelaying and 2 nd coat just before brick masonry work)
asdirected (cost of water proofing compound & polymer
basedpaint to be paid separately).( Chequering not required
overconcrete or painted surface).

8.01 Brick-work with 1st class bricks in cement morter ( 6:1) A. In 33.960 Cum 4887.00 #VALUE!
foundation and upto Plinth
8.02 B. In Superstructure of Ground Floor 27.700 Cum 5109.00 #VALUE!

8.03 C. In Superstructure of First Floor 29.700 Cum 5220.00 #VALUE!

8.04 D. In Superstructure of second Floor 32.350 Cum 5331.00 #VALUE!

9.01 125 mm thick Brick-work with 1st class Bricks in cement 10.350 sqm 684.00 #VALUE!
morter ( 1:4) in First Floor

9.02 B. In Superstructure of 2nd floor 10.350 sqm 696.00 #VALUE!

10.01 Hire and labour chage for shuttering with centering and 23.630 sqm 205.00 #VALUE!
necessary staging upto 4.0 m using approved props and thick
hard wood planks of apprved thickness with requird bracings
for concrete slab, beams, lintels etc. including fitting, fixing
and striking out after completion of works. a) Without prop

10.02 In FF 23.630 sqm 223.00 #VALUE!

10.03 In 2nd F 23.690 sqm 241.00 #VALUE!

10.04 b) With prop 117.490 sqm 330.00 #VALUE!

9.05 In FF 117.490 sqm 348.00 #VALUE!

10.05 In 2nd F 124.490 sqm 366.00 #VALUE!

11.01 Ordinary cement concrete (Mix 1: 1.5 : 3) with graded stone 16.190 cum 5878.19 #VALUE!
chips ( 20 mm nominal size) excluding shuttering and
reinforcement, if any as per relevant IS code. In
GF

11.02 In FF 16.190 cum 5973.19 #VALUE!

11.03 In 2nd F 16.990 cum 6068.19 #VALUE!

12.01 Reinforcement for reinfroced concrete work in all sorts of 1.272 MT 54548.55 #VALUE!
structures including distribution bars,stirrups ,binders etc,
initial straighening and removal of loose rust ( if necessary),
cutting to requisite length,hooking and binding to correct
shape placing in proper position an binding with 16 guage
black annealed wire in every intersection,complete as per
drawing and direction.

12.02 In FF 1.272 MT 54978.55 #VALUE!

12.03 In FF 1.334 MT 55408.55 #VALUE!

13.01 M.S.or W.I. Ornamental grill of approveddesign joints 2.480 qtls 7238.00 #VALUE!
continuously welded with M.S,W.I. Flats and bars of windows,
railing etc.fitted and fixed with necessary screws and
lugs in ground floor.
13.02 In FF 2.480 qtls 7310.38 #VALUE!

13.03 In 2nd F 2.480 qtls 7382.76 #VALUE!

14.00 1.080 Sqm 53057.00 #VALUE!

Wood work in door and window frame fitted and fixed in
position complete including a protective coat of painting at the
contact surface of the frame excluding the cost of concrete,
iron butt hinges and M.S. Clamp.(The quantum should be
corrected upto three decimals) a) Neem wood

15.00 Supplying fitting and fixing M.S. clamp for fixing door and 168.000 Nos. 20.00 #VALUE!
window frame made of flat bent bar, end bifurcated, with
necessary screws etc by cement concrete with stone chips
(1:2:4) complete as per direction. (Cost of concrete will be
paid seperately) i) 40 mm X 6 mm of 12.5 cm length

16.00 Panel shutters of door and window, as per design (each anel 20.910 Sqm 2789.00 #VALUE!
consisting of single plank without joint), including fitting and
fixing the same in position but excluding the cost of hige and
other fittings.i) 35mm thick shutter 19 mm thick panel of size
30 cm to 45 cm.(Sishu, Gamar, Champ, Bhola, Badam,
Mogra, Hollock as directed) Gamari

17.00 Iron Butt hinges of approved quality fitted and fixed with steel 72.000 Nos. 43.00 #VALUE!
screws with ISI marks.a) 100 X 58 X 1.90 mm
18.00 Iron hasp bolt of approved quality fitted and fixed complete 12.000 Nos. 159.00 #VALUE!
(oxidised) with 16 mm dia rod with centre bolt and round
fitting.a)250mm long
19.00 Iron socket bolt of approved quality fitted and fixed 36.000 Nos. 63.00 #VALUE!
complete.a)150 mm long X 10 mm dia bolt
20.00 Anodised aliminium D-type handle of approved quality 12.000 Nos. 55.00 #VALUE!
manufactured from extruded section conforming to I.S.
specification (I.S. 230/72) fitted and fixedcomplete:a)With
round base:(ii) 100 mm grip x 10 mm dia rod.
21.01 Plaster (to wall, floor, ceiling etc.) with sand and cement 124.340 Sqm 126.00 #VALUE!
mortar including rounding off or chamfering corners as
directed and raking out joints , including throating, nosing and
drip course, scaffolding / staging where necessary. a) 10 mm
thick plaster in cement-sand morter(1:4). i. INTERIOR WALLS

21.02 In FF 124.340 Sqm 130.00 #VALUE!

21.03 In 2nd F 131.590 Sqm 134.00 #VALUE!

21.04 b)15 mm thick plaster in cement-sand mortet (1:6) i. 287.080 Sqm 140.00 #VALUE!
EXTERIOR WALLS
21.05 In FF 292.780 Sqm 144.00 #VALUE!

21.06 In 2nd F 297.130 Sqm 148.00 #VALUE!

22.00 Neat cement punning (about 1.5 mm thick) in wall, dado, 91.090 Sqm 34.00 #VALUE!
window sills, floor, drain etc.
23.00 Applying Two Coats decorative cement based paint of 1166.170 Sqm 49.00 #VALUE!
approved quality after preparing the surface including scraping
the same thoroughly ( plastered or concrete surface) as per
manufacturer's specification.

24.01 Priming one coat on timber, plastered or on steel or other 140.400 Sqm 38.00 #VALUE!
metalled surface with synthetic enamel or oil bound primer of
approved quality including smoothening surface by sand
papering etc. A) On timbered or Plastered Surface

24.02 B) On steel or other metalled surface 67.410 Sqm 29.00 #VALUE!

25.01 Two coats painting with best quality synthetic enamel paint of 140.400 Sqm 81.00 #VALUE!
approved make and brand (With Super gloss Hi-gloss of
approved quality any shade except white) including
smoothening surface by sand papering etc. A) On timbered or
Plastered Surface

25.02 B) On steel or other metalled surface 67.410 Sqm 79.00 #VALUE!

26.01 Artificial stone in floor, dado, staircase etc with cement 89.700 Sqm 262.00 #VALUE!
concrete (1:2:4) with stone chips, laid in panels as
directedwith topping made with ordinary or white cement
(asnecessary) and marble dust in proportion (1:2)
includingsmooth finishing and rounding off corners including
rakingout joints or roughening of concrete surface and
applicationof cement slurry before flooring works using
cement @ 1.75kg/sq.m all complete including all materials
and labour.In ground floor.3 mm. thick topping (High polishing
grinding on this item isnot permitted with ordinary
cement).Using grey cement
(i) 25 mm. thick

26.02 In First Floor 87.960 Sqm 265.93 #VALUE!

26.03 In 2nd Floor 87.960 Sqm 269.86 #VALUE!

27.00 Supplying fitting approved type ventilator in position after 50.000 Nos. 108.00 #VALUE!
cutting holes in walls setting in cement mortar mending
damages to wall and plaster and two coats of paint of
approved brand sand shade.
28.00 Supply of UPVC pipes (B Type) & fittings conforming to IS- 10.000 m 188.00 #VALUE!
13592-1992. A) With valamoid joints including sealing with
sand-cement morter (4:1) upto quarter depth. a) 75 mm dia.
Internal.
29.01 Supplying complete set of wooden high and low bench set of 2.618 cum 34592.00 #VALUE!
2.1m longX30cm wideX 75cm/45cm high of 6 nos neem wood
post in each bench, top plank of 25mm th gamari
wood,bracers of 75mmX25mm neem wood plank footrest of
50mmX25mm neem plank with priming and painting
complete. (40 sets bench high+low and 7"0"long each) Local
wood

29.02 (-Do--Do-) Painting over a coat of priming. 100.680 sqm 110.00 #VALUE!

30.00 Painting Black board of size1.2mX.9m with Black colour 5.000 each 500.00 #VALUE!
pigment making edge bid 50mmX20mm with cement morter
complete as per direction of Engineer- In- Charge.
 31.00 Painting Block letter with necessary paint colour for sign board 1.000 Nos. 1500.00 #VALUE!
on yellow base colour and bordering mentioning
name,address, cost and fund name complete as per direction
of Engineer- In- Charge.

32.00 GST 5%(as per vetted estimate) 1.000 Item 100216.00 #VALUE!
33.00 Labour cess 1% 1.000 Item 21054.00 #VALUE!
Total in Figures #VALUE!

Quoted Rate in Figures

Select
0.00

Quoted Rate in Words #VALUE!

hapra Bock area under MSDP for the year 2017-

after filling the relevent columns, else the bidder is

r Name and Values only )

TEXT #
TOTAL AMOUNT
In Words

55
#VALUE!

#VALUE!
#VALUE!

#VALUE!

#VALUE!

#VALUE!

#VALUE!

#VALUE!

#VALUE!

#VALUE!

#VALUE!

#VALUE!

#VALUE!
#VALUE!

#VALUE!

#VALUE!

#VALUE!

#VALUE!

#VALUE!

#VALUE!

#VALUE!

#VALUE!

#VALUE!

#VALUE!

#VALUE!

#VALUE!
#VALUE!

#VALUE!

#VALUE!

#VALUE!

#VALUE!

#VALUE!

#VALUE!

#VALUE!

#VALUE!
#VALUE!

#VALUE!

#VALUE!

#VALUE!

#VALUE!

#VALUE!

#VALUE!

#VALUE!

#VALUE!

#VALUE!

#VALUE!

#VALUE!
#VALUE!

#VALUE!

#VALUE!

#VALUE!

#VALUE!

#VALUE!

#VALUE!

#VALUE!
 #VALUE!

#VALUE!
#VALUE!
#VALUE!

#VALUE!

#VALUE!
Please Enable Macros to View BoQ information
Q information