SAVONA™ BIDET
VITREOUS CHINA
SAVONA™ BIDET
❑ 5089.024 For deck-mounted fitting (illustrated)
• Vitreous china
• Flushing rim and vertical cleansing spray
• Integral soap/sponge deck
• Design-matched to Savona toilets
• Integral overflow
• Two bolt caps
Shown with 8391.000 Amarilis Bidet fitting with
Lexington Handles 0000.902 (not included)
❑ 5089.052 For over-the-rim fitting
• Vitreous china
• Punched for single hole, over-the-rim fitting,
less flushing rim and spray
• Integral soap/sponge deck
• Design-matched to Savona toilets
• Integral overflow
• Two bolt caps
Nominal Dimensions:
660 x 387 x 394mm SEE REVERSE FOR ROUGHING-IN DIMENSIONS
(26" x 15-1/4" x 15-1/2")
Compliance Certifications -
Meets or Exceeds the Following Specifications:
• ASME A112.19.2M for Vitreous China Fixtures
To Be Specified:
❏ Color: ❏ White ❏ Bone ❏ Linen ❏ Silver
❏ Fawn Beige ❏ Black
❏ Bidet Fitting*:
❏ Fitting Finish:
❏ Trap:
❏ Supplies with Stops:
* See faucet section for additional models available
K3
© 2008 AS America Inc. Revised 2/08
SAVONA™ BIDET
VITREOUS CHINA
5089.024 5089.052
For Deck-Mounted Fitting Variation For Over-the-Rim Fitting Variation
159mm 89mm
203mm 76mm 140mm 108mm
(6-1/4) (3-1/2) 76mm
(8) (3) MIN. (5-1/2) (4-1/4)
19mm 38mm (3) MIN.
FOOT OUTLINE
(3/4) (1-1/2) FOOT OUTLINE
C/L OF OFFSET C/L OF OFFSET
WASTE WASTE
1-3/4 DIA. 1-3/4 DIA.
DRAIN 102mm
273mm (4) DRAIN
OUTLET 273mm
(10-3/4) OUTLET
(10-3/4)
235mm 235mm
387mm (9-1/4) 102mm 29mm (9-1/4) 29mm
SPRAY 387mm
(15-1/4) FOOT (4) (1-1/8) FOOT (1-1/8)
(15-1/4)
C/L OF 3/8 HOT AND
381mm 216mm COLD SUPPLY INLETS
400mm 197mm
(15) (8-1/2) FINISHED (15-3/4) (7-3/4) FINISHED
660mm WALL WALL
660mm
(26) (26)
246mm 246mm
25mm (9-3/4) 25mm (9-3/4)
(1) 108mm (1)
(4-1/4)
178mm 178mm
(7) (7)
COUPLING NUT 3/8 FLEX C.W.T. SUPPLY
ON FITTING FROM FITTING
"A" "A"
394mm 394mm
SPRAY HOLE (15-1/2)
(15-1/2)
"A" 286mm "A"
286mm
(11-1/4) (11-1/4) 102mm
102mm
(4) (4)
1-1/4 O.D. TAILPIECE 1-1/4 O.D. TAILPIECE
FINISHED 483mm FINISHED 483mm
FLOOR (19) FLOOR (19)
1-1/4 O.D. TAILPIECE (THRU FLOOR 1-1/4 O.D. TAILPIECE (THRU FLOOR
C/L OF (2) 10mm (3/8) DIA. C/L OF (2) 10mm (3/8) DIA. TRAPPING ONLY)
TRAPPING ONLY)
MOUNTING HOLES ON 7" CENTERS MOUNTING HOLES ON 7" CENTERS
127mm 102mm 127mm 102mm
(5) (4) (5) (4)
FINISHED *SUPPLIES
3/8 N.P.T.
FINISHED *SUPPLIES
3/8 N.P.T.
178mm
162mm FLOOR
FLOOR 1-1/4 O.D. WASTE OUTLET 130mm (7)
1-1/4 O.D. WASTE OUTLET 130mm (6-3/8)
C/L OF BIDET (5-1/8)
C/L OF BIDET (5-1/8)
29mm (1-1/8) OFFSET OF WASTE OUTLET
29mm (1-1/8) OFFSET OF WASTE OUTLET
VIEW "A" - "A" (WALL OUTLET DETAIL)
VIEW "A" - "A" (WALL OUTLET DETAIL)
NOTES: NOTES:
*(SUPPLIED
3/8 N.P.T. x 3/8 O.D. COMP. SUPPLIES, LESS VERTICAL RISERS *(SUPPLIED
3/8 N.P.T. x 3/8 O.D. COMP. SUPPLIES, LESS VERTICAL RISERS
BY OTHERS). BY OTHERS).
THIS INSTALLATION REQUIRES A TRUE 1-1/4" BODIED “P” TRAP, A THIS INSTALLATION REQUIRES A TRUE 1-1/4" BODIED “P” TRAP, A
UNIVERSAL 1-1/4--1-1/2 IS NOT APPLICABLE. UNIVERSAL 1-1/4--1-1/2 IS NOT APPLICABLE.
▲ WALL OUTLET INSTALLATION. DRAIN TAILPIECE MUST BE CUT ▲ WALL OUTLET INSTALLATION. DRAIN TAILPIECE MUST BE CUT
TO 1-5/8 LG. TO 1-5/8 LG.
▼ DIMENSIONS SHOWN FOR LOCATION OF “P” TRAP ARE SUGGESTED. ▼ DIMENSIONS SHOWN FOR LOCATION OF “P” TRAP ARE SUGGESTED.
■ THRU FLOOR OUTLET INSTALLATION. ■ THRU FLOOR OUTLET INSTALLATION.
“P” TRAP AND FITTINGS NOT FURNISHED WITH BIDET AND “P” TRAP AND FITTINGS NOT FURNISHED WITH BIDET AND
MUST BE ORDERED SEPARATELY. BIDET FITTING HAS TRANSFER MUST BE ORDERED SEPARATELY. BIDET FITTING HAS TRANSFER
VALVE FEATURE. VALVE FEATURE.
IMPORTANT: Dimensions of fixtures are nominal and may vary within the IMPORTANT: Dimensions of fixtures are nominal and may vary within the
range of tolerances established by ANSI Standard A112.19.2 range of tolerances established by ANSI Standard A112.19.2
These measurements are subject to change or cancellation. No responsibility These measurements are subject to change or cancellation. No responsibility
is assumed for use of superseded or voided leaflet. is assumed for use of superseded or voided leaflet.
K4
© 2008 AS America Inc.
