TroubleShooting for RB450G
These repair instructions are for NON WARRANTY repairs only!
Please make visual inspection for signs of corrosion
or mechanical damages before starting.
No power, blue LED doesn’t shine
NOT OK
Check Schottky diode
Change faulty Schottky diode
D802
OK
NOT OK NOT OK
Check Zener diode Check PNP transistor Q802
Change faulty components
D803 and Zener diode D804
OK
NOT OK
Check P-channel MOSFET
Change faulty MOSFET
Q801
OK
NOT OK
Check N-channel Dual MOSFET
Change faulty MOSFET
Q806
OK
NOT OK
Check resistor R819 resistance.
Change faulty resistor
It should be 10 Ohm
OK
NOT OK
Check PWM controller
Change faulty controller
U803
Problem
still appears
The board is unrepairable
PoE does not work
NOT OK
Check diode bridges
Change faulty diode bridges
D805, D806
OK NOT OK
Check connector
Change faulty connector
J504
Problem
still appears
The board is unrepairable
RB doesn’t boot, green and blue LED’s is shine
NO 2.5V NOT OK
Check 2.5V output, Check ferrite beads FB801, FB806
Change faulty ferrite beads
for example on C849 pins resistance. It should be less than 1 Ohm
OK
NOT OK
Change faulty DC-DC Step-Down
Change faulty ferrite beads
converter U805
OK
OK
Try to change RAM memory
U201-U204
NO 1.2V
OK
Check CPU core 1.2V output, Check ferrite beads FB802, FB803 Change faulty DC-DC Step-Down
for example on C853 resistance. It should be less than 1 Ohm converter U806
NOT OK
OK
Change faulty ferrite beads
NOT OK
Check ferrite beads FB701, FB702 resistance.
Change faulty ferrite beads
It should be less than 1 Ohm
OK
NO 40MHz
Check 40MHz clock on crystal
Change faulty crystal oscillator
oscillator Y301 pin#3
OK
Try to change processor
U1
Problem
still appears
The board is unrepairable
Ethernet port1 (J504) does not work,
drop ping packets
NOT OK
Check resistors R563-R566 resistance.
Change faulty resistors
It should be 75 Ohm +/-1%
OK
NOT OK
Check transformer
Change faulty connector
TR501
OK
Check voltage drop between diode arrays D507, D508 NOT OK
pin#1 and Ground. This value should be in the range from Change faulty diode arrays and
0.21V to 0.26V measured in diode mode (hold “positive” 6-port GbE Switch U501
wire on the Ground and “COM” wire to D507 pin#1)
OK
NO 1.5V
OK
Check 1.5V output, Check ferrite beads FB804, FB805 Change faulty DC-DC Step-Down
for example on C841 pins resistance. It should be less than 1 Ohm converter U807
NOT OK
OK
Change faulty ferrite beads
NOT OK
Check ferrite bead FB501 resistance.
Change faulty ferrite bead
It should be less than 1 Ohm
OK
NO 1.0V
OK Check ferrite beads FB601, OK
Check 1.0V output, Check PNP Change faulty 6-port
FB602, FB604-FB607 resistance.
for example on C619 transistor Q601 GbE switch U501
It should be less than 1 Ohm
NOT OK
NOT OK
OK
Change faulty transistor Change faulty ferrite beads
NOT OK
Check 25MHz clock on Change faulty Network processor
R541 pins U1
Problem
still appears
The board is unrepairable
Ethernet ports 2(J501), 3(J505), 4(J503), 5(J502)
do not work, drops ping packets
NOT OK
Check termination resistance between Tx
and Rx lines in the each Ethernet connector. Change faulty connectors
It should be 150 Ohm +/- 2%
OK
Check voltage drop between diode arrays D501-D506,
NOT OK
D509, D510 pin#1 and Ground. This value should be in the
Change faulty diode arrays and
range from 0.21V to 0.26V measured in diode mode (hold
6-port GbE Switch U501
“positive” wire on the Ground and “COM” wire to D501
pin#1)
OK
NO 1.5V
OK
Check 1.5V output, Check ferrite beads FB804, FB805 Change faulty DC-DC Step-Down
for example on C841 pins resistance. It should be less than 1 Ohm converter U807
NOT OK
OK
Change faulty ferrite beads
NOT OK
Check ferrite beads FB502-FB505 resistance.
Change faulty ferrite bead
It should be less than 1 Ohm
OK
NO 1.0V
Check ferrite beads FB601,
Check 1.0V output, Check PNP transistor OK OK
Change faulty 6-port
FB602, FB604-FB607 resistance.
for example on C619 Q601 GbE switch U501
It should be less than 1 Ohm
NOT OK
NOT OK
OK
Change faulty transistor Change faulty ferrite beads
NOT OK
Check 25MHz clock on Change faulty Network processor
R541 pins U1
Problem
still appears
The board is unrepairable
Reference
Part Number Manufacturer Description
number
IC TVS ARRAY LOW-CAP
D501-D510 AOZ8000CIL Alpha & Omega
SOT23-6
Won-Top Electronics Co., Diode Schottky 60V 3A
D802 SX36-T3-LF
Ltd. SMA
Won-Top Electronics Co., Diode Zener BZX84C 10V 5%
D803 BZX84C10-T1-LF
Ltd. 225mW SOT23
Z-DIODE 0.41W 27V 2%
D804 BZX84B27-AU T/R 7" PanJit International Inc.
SOT23
Diode bridge 200V 1.5A
D805, D806 DB153S SINYORK CO., LTD.
DBS
FB501-FB505, FB601,
Ferrite Bead 120Ohm 500mA
FB602, FB604-FB607, BLM15AG121SN1D Murata manufacturing Co.
0402
FB701, FB702
Ferrite Bead 330Ohm 1.2A
FB801, FB802, FB805 BLM18PG331SN1D Murata manufacturing Co.
0603
Resistor 0R
FB803 WR06X000 PTL Walsin Technology
0603
Ferrite Bead 120Ohm 3A
FB804, FB806 BLM18SG121TN1D Murata manufacturing Co.
0603
RJ45 10/100/1000 w/LED
J501-J503, J505 RB1-216BAK1A U.D. Electronic Corp.
w/Shield TD TH
Powerway Electronics Co., RJ45 w/LED w/Shield TD TH
J504 8108-B114
LTD w/oEMI TinPlated
STMICROELECTRONICS A. P Transistor PNP -30V -5A 15W
Q601 STD888T4
. Hfe=300 D-PAK
Transistor MOSFET P-Ch -60V -
Q801 AO4441 Alpha & Omega
4A 100mOhm 3W SO-8
Transistor PNP -65V -100mA
Q802 BC856B,215 NXP Semiconductors
250mW Hfe=220-470 SOT-23
Advanced Power Transistor MOSFET N-Ch Dual
Q806 AP9960GM
Electronics Corp. 40V 7.8A 20mOhm SO-8
CRCW060375R0FKTAB Vishay Intertechnology, Resistor 75R 1%
R563 - R566
C Inc. 0603
CRCW040210R0FKTDB Vishay Intertechnology, Resistor 10R 1%
R819
C Inc. 0402
10/100/1000 Single Ethernet
TR501 LCZ3N1ZB Cetus International Ltd.
transformer SMD
600MHz Network Processor
U1 AR7161-BC1A Atheros Technology Ltd.
(LF-AR7100X chipset)
Nanya Technology Europe DDR SDRAM 512Mbit DDR400
U201 – U204 NT5DS64M8CS-5T
GmbH 64Mx8bit TSOPII-66
U501 AR8316-AK1E Atheros Technology Ltd. 6-port GbE Switch
Richtek Technology
U803 RT9206PS Power Controller SOP-16
Corporation
Richtek Technology DC-DC Step down converter,
U805 - U807 RT8011APQW Corporation WDFN-8E
NSK Jenjaan Quartek Crystal Oscillator 40MHz
Y301 NAOD40.000-C3C-CI4
Corporation 30ppm 3.3V 15pF 0+70 7x5
When you order components for repairing boards from our sales,
please, write components reference number not a part number
RB450G Reference picture
RB450G Reference picture
RB450G Reference picture
RB450G Output Voltage picture
