(Format for the Training Report)

Sample Sheet (Title Page/Front Page)

A REPORT OF INDUSTRIAL TRAINING (14 PT.)

at

[NAME OF COMPANY/ INDUSTRY]

OF THE DEGREE OF (12pt.)

BACHELOR OF TECHNOLOGY (14 pt.)

(Electronics & Communication Engineering) (14pt.)

College Logo

JUNE-JULY,2019 (14 pt.)

SUBMITTED BY:

NAME :

UNIVERSITY ROLL NO. :

(12pt.)

DEPARTMENT OF ELECTRONICS & COMMUNICATION ENGINEERING (12pt.)

MAHARAJA SURAJMAL INSTITUTE OF TECHNOLOGY, DELHI (14pt.)

1. The report shall be computer typed (English- British, Font -Times Roman, Size-12 point, Double spacing

between lines) and printed on A4 size paper.

2. The report shall be hard bound with cover page in white color. The name of the candidate, degree, month of

training, college name shall be printed in black on the cover [refer sample sheet (title page/front page)].

3. The report shall be typed on one side only with double space with a margin 3.5 cm on the left, 2.5 cm on the

top, and 1.25 cm on the right and at bottom.

4. In the report, the title page [Refer sample sheet (title Page/front page)] should be given first then the

Certificate by Company/Industry/Institute and then candidate’s declaration, followed by an abstract of the

report (not exceeding one page). This should be followed by the acknowledgment, list of figures/list of tables,

notations/nomenclature, and then contents with page nos.

5. The diagrams should be printed on a light/white background, Tabular matter should be clearly arranged and

the font of the Tabular matter should be Font -Times Roman, Size-10 point, Single spacing between lines.

Decimal point may be indicated by full stop(.). The caption for figure must be given at the BOTTOM(center

aligned) of the figure and Caption for the Table must be given at the TOP(center aligned) of the Table. The

font for the captions should be Times Roman, Italics, Size-10 point.

6. The font for the chapter titles should be Times Roman, Bold, Capital, Size-16 point and center aligned. The

font for the Headings should be Times Roman, Bold, and Size-14 point. The font for the sub-headings should

be Times Roman, Bold, and Size-12 point.

7. Equations should be numbered as 1.1, 1.2, 1.3 etc in chapter 1. Similarly as 2.1, 2.2, 2.3 etc in chapter 2 and so

on.

8. Figures should be numbered as Figure1.1, Figure 1.2, Figure 1.3 etc in chapter 1. Similarly as Figure 2.1,

Figure 2.2, Figure 2.3 etc in chapter 2 and so on.

9. Tables should be numbered as Table 1.1, Table 1.2, Table 1.3 etc in chapter 1. Similarly as Table 2.1, Table

2.2, Table 2.3 etc in chapter 2 and so on.

10. Conclusions and future scope each must not exceed more than one page.
11. The graphs (optional) should be combined for the same parameters for proper comparison. Single graph

should be avoided as far as possible.

12. The training report must consist of following chapters:

[Chapter-1] INTRODUCTION

[Chapter-2] TRAINING WORK UNDERTAKEN

[Chapter-3] RESULTS AND DISCUSSIONS

[Chapter-4] CONCLUSION AND FUTURE SCOPE

13. References (For style of references follow the instructions attached)

14. Appendix (Any additional information regarding training, (If any) e.g. program, is supposed to be included in

appendix )

15. Paste a CD containing the soft copy of Report (in Docx and PDF), Reference papers and other material (if

any,) related to the work, on the inner side of back hard cover.
 Sample sheet -Declaration

MAHARAJA SURAJMAL INSTITUTE OF TECHNOLOGY,

CANDIDATE'S DECLARATION

I “NAME OF THE STUDENT” hereby declare that I have undertaken six weeks industrial at “Name

of Company/ Industry ” during a period from ______ to _______ in partial fulfillment of

requirements for the award of degree of B.Tech (Electronics and Communication Engineering) at

MAHARAJA SURAJMAL INSTITUTE OF TECHNOLOGY, DELHI. The work which is being

presented in the training report submitted to Department of Electronics and Communication

Engineering at Maharaja Surajmal Institute Of Technology, is an authentic record of training work.

Signature of the Student

Signature of Internal Examiner Signature of External Examiner

CONTENTS

Topic Page No.

Certificate by Company/Industry/Institute i
Candidate’s Declaration ii
Abstract iii
Acknowledgement vi
About the Company/ Industry / Institute v
List of Figures vi
List of Tables vii
Definitions, Acronyms and Abbreviations viii
CHAPTER 1 INTRODUCTION 1-19
(This chapter should include the background of the topic of the training, theoretical explanation
about the same, SW/HW tools learned)
1.1 1
1.2 4
1.3 7
1.4 14
CHAPTER 2 TRAINING WORK UNDERTAKEN 20-__
(This chapter should include the sequential learning steps, methodology followed and project
undertaken, if any)
2.1 20
2.2 __
2.3 __
2.4 __
2.5 __
CHAPTER 3 RESULTS AND DISCUSSION __-__
(This chapter should include any results and the related discussions for the projects made during
training. If no project has been made the results and snapshots for the tools learnt should be included)
3.1 __
3.2 __
3.3 __
3.4
CHAPTER 4 CONCLUSION AND FUTURE SCOPE __-__
4.1 Conclusion __
4.2 Future Scope __
REFERENCES __
APPENDIX (Program or any additional information regarding training) __

(Note: Page No.s for different topics in report may vary according to the contents.

Headings within the chapters should be numbered as 1.1, 1.2, 1.3 and so on for chapter 1.
Similarly as 2.1,2.2, 2.3 and so on for chapter 2. The corresponding subheadings as 1.1.1, 1.1.2,
1.1.3 and so on.)