Scribd
Upload
444 views1 page

Flow Chart Test Package

This hydrostatic test report is for the sprinkler system of Project Sprinkler in the Bedeng area. The test was conducted on the sprinkler zona 1 spool pipe end valve using water at pressures of 16kg/cm2, 10kg/cm2, and 5kg/cm2, holding each pressure for 30 minutes. The test resulted in acceptance with no pressure loss observed over the full testing period.

Uploaded by

jajaka
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
444 views1 page

Flow Chart Test Package

This hydrostatic test report is for the sprinkler system of Project Sprinkler in the Bedeng area. The test was conducted on the sprinkler zona 1 spool pipe end valve using water at pressures of 16kg/cm2, 10kg/cm2, and 5kg/cm2, holding each pressure for 30 minutes. The test resulted in acceptance with no pressure loss observed over the full testing period.

Uploaded by

jajaka
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

Project Sprinkler

HYDRO / PNEUMATIC TEST REPORT

Project / No. : 8236488290 Test Package No. :

Area / Unit : Sprinkler Zona 1 Spool Pipe End Valve System No : Sprinkler

Location : Bedeng Maincon. Name : PT. Foxone Media Pratama

Pressure (KG/cm2) Operation Design Test


Method ✓ Hydro □ Pneumatic □ Visual □ Service □ Other
Test Fluid ✓ Water □ Air □ N2 □ Other
Pressure Gauge No.
Holding Time 30 MIN

TEST
PRESSURE
(16Kg/cm²) 100%
Test

(10Kg/cm²)

(5Kg/cm²)

0
15 Min 30 Min 15 Min
60 Min
TIME
Pressure Gauge / Recorder : Check Calibration
Test Result : ✓ Accepted

Comments :

Prepared By Inspected By Witnessed By

Name : Name : Name :


Date : Date : Date :

You might also like