Shenzhen LIZE Electronic Technology Co.
, Ltd
SPECIFICATION
MX8732A
USB/PS2 Single Chip Optical Mouse Sensor
VERSION 1.1
PDF 文件使用 "FinePrint pdfFactory Pro" 试用版本创建 www.fineprint.com.cn
Tel:86-755-8835 3502/03/04 Fax:86-755-8835 3509
Website:http://www.lizhiic.com MX8732A
U+P Single Chip Optical Mouse Sensor
TABLE OF CONTENTS
1. General Description.................................................................................................... 3
2. Features....................................................................................................................... 3
3. Pin Assignment........................................................................................................... 4
4. Absolute Maximum Rating ......................................................................................... 5
5. Electrical Characteristic ............................................................................................. 5
6. DC Electrical Characteristic....................................................................................... 5
7. Application Circuit ...................................................................................................... 6
8. Package (Dimension In mm) ...................................................................................... 7
9. Revision History.......................................................................................................... 7
Shenzhen LIZE Electronic Technology Co., Ltd Date: 10.May. 2013
Version: 1.1 Page: 2 of7
PDF 文件使用 "FinePrint pdfFactory Pro" 试用版本创建 www.fineprint.com.cn
Tel:86-755-8835 3502/03/04 Fax:86-755-8835 3509
Website:http://www.lizhiic.com MX8732A
U+P Single Chip Optical Mouse Sensor
1. General Description
The MX8732A chip is a low cost single chip optical mouse solution used to implement a
non-mechanical tracking engine for computer mice. It is based on optical navigation technology with
USB/PS2 combo MCU bundled. Which measures changes in position by optically acquiring
sequential surface images(frames) and mathematically determining the direction and magnitude of
movement. The single chip optical mouse sensor provides a complete and compact mouse solution,
There are no moving parts, and precision optical alignment is not required, few outside components
use and facilitate high volume assembly. It is a true crystal-less and ultra low cost solution.
2. Features
●Optical Navigation Technology
●Low-cost and powerful solution for PS/2 and low-speed USB combo mouse
●Microsoft 3D Intellimouse and IBM PS/2 mouse compatible
●Internal switch for USB DP/DM and PS2 CLK/Data I/O
●Universal Serial Bus Specification, version 2.0
●USB HID Specification, version 1.1
●USB-IF and WHQL compliable
●5V Power Supply
●Power Saving During No Motion
●On Chip LED Drive with Regulated Current
●Crystal-less
●Resolution 1000DPI
●Low EMI radiation
●Supports 3D (X, Y, Z) input
●Supports 3 buttons and mechanical wheel encoding
Shenzhen LIZE Electronic Technology Co., Ltd Date: 10.May. 2013
Version: 1.1 Page: 3 of7
PDF 文件使用 "FinePrint pdfFactory Pro" 试用版本创建 www.fineprint.com.cn
Tel:86-755-8835 3502/03/04 Fax:86-755-8835 3509
Website:http://www.lizhiic.com MX8732A
U+P Single Chip Optical Mouse Sensor
3. Pin Assignment
Chart 1 Pin Assignment
Pin No. Symbol I/O Function
1 LB I Left button input
2 XYLED O LED control (sink current)
3 NC -
4 GND P GND
5 VDD5 P 5V Power Input
3.3V DC voltage output from internal regulator,
6 V33 P
This pin need to be tied to a 10UF/104 capacitor.
7 DP/CLK I/O USB D+ / PS2 CLK
8 DM/DATA I/O USB D- / PS2 DATA
9 RB I Right button input
10 MB I Middle button input
11 Z2 I Z axis Input 2
12 Z1 I Z axis Input 1
Shenzhen LIZE Electronic Technology Co., Ltd Date: 10.May. 2013
Version: 1.1 Page: 4 of7
PDF 文件使用 "FinePrint pdfFactory Pro" 试用版本创建 www.fineprint.com.cn
Tel:86-755-8835 3502/03/04 Fax:86-755-8835 3509
Website:http://www.lizhiic.com MX8732A
U+P Single Chip Optical Mouse Sensor
4. Absolute Maximum Rating
Symbol Min. Max. Unit
Operating Temperature 0 70 ºC
Storage Temperature –65 150 ºC
Input voltage –0.5 6.0 V
Output voltage –0.5 6.0 V
5. Electrical Characteristic
Test Condition: T = 25ºC, VDD=5.0V, VSS=0V
Parameters Sym. Min. Typ. Max. Unit
Operating voltage VDD 4.5 5.0 5.5 V
Operating Current (normal operation) IOP − − 15 mA
Operating Current (Sleep mode) Isleep − 6.5 - mA
USB suspend current Isuspend - - 320 uA
Output voltage of 3.3V regulator Vreg 3.0 3.3 3.6 V
L, M, R, debounce time Tb 17 − − ms
Z-axis debounce time Tz 700 − − µs
6. DC Electrical Characteristic
(T=25℃, Vdd=5V, Vss=0V)
Symbol Parameter Condition Min Type Max Unit
3.3V Regulator
Output voltage of 3.3v
Vreg Vdd=4.4V~5.25V 3.0 3.3 3.6 V
Regulator
Low Power Reset
VresetL - - - 3.3 V
detecting low Voltage
Low Power Reset
VresetH - 3.6 - - V
detecting high Voltage
MCU operation
Input Leakage Current for
Iil VIN=VDD, VSS - - ±1 uA
input pins
Icc VDD operating supply Output pins - - 10 mA
Shenzhen LIZE Electronic Technology Co., Ltd Date: 10.May. 2013
Version: 1.1 Page: 5 of7
PDF 文件使用 "FinePrint pdfFactory Pro" 试用版本创建 www.fineprint.com.cn
Tel:86-755-8835 3502/03/04 Fax:86-755-8835 3509
Website:http://www.lizhiic.com MX8732A
U+P Single Chip Optical Mouse Sensor
current Normal frequency floating
operation mode
USB Interface
Voh Static Output High 2.8 - 3.6 V
Vol Static Output Low - - 0.3 V
Differential Input
Vdi 0.2 - - V
Sensitivity
Differential Input
Vcm USB operation 0.8 - 2.5 V
Command Mode Range
Mode
Single Ended Receiver
Vse 0.8 - 2.0 V
Threshold
Cin Transceiver Capacitance - - 20 PF
Output Voltage of internal
Vrg 3.0 - 3.6 V
Regulator
7. Application Circuit
Note:
1. C1, R4 as close USB/PS2 line solder pad on PCB as possible, PCB layout should be designed in
such a way as to ensure that the VDD is stable and pass through RC filter.
2. The capacitance C2, C3, C4 & C5 have to close to IC.
3. D+/CLK and D-/DATA signal line have the short trace to IC.
4. Recommend to have ground grid on the PCB periphery.
5. Components in dotted line are used for EMC issue.
Shenzhen LIZE Electronic Technology Co., Ltd Date: 10.May. 2013
Version: 1.1 Page: 6 of7
PDF 文件使用 "FinePrint pdfFactory Pro" 试用版本创建 www.fineprint.com.cn
Tel:86-755-8835 3502/03/04 Fax:86-755-8835 3509
Website:http://www.lizhiic.com MX8732A
U+P Single Chip Optical Mouse Sensor
8. Package (Dimension In mm)
12 11 10 9 8 7
1 2 3 4 5 6
9. Revision History
Version Update date Revised Content Revised by Confirmed by
V1.0 2011-12-10 Original LiuXing Alan
V1.1 2013-5-10 Improve the DPI Jacke Alan
Shenzhen LIZE Electronic Technology Co., Ltd Date: 10.May. 2013
Version: 1.1 Page: 7 of7
PDF 文件使用 "FinePrint pdfFactory Pro" 试用版本创建 www.fineprint.com.cn
