AUTOMATIC CAR PARKING SYSTEM USING
PLC SCADA
MINOR PROJECT REPORT
Submitted in partial fulfilment of the requirements for the award of the
degree of
BACHELOR OF TECHNOLOGY
in
ELECTRICAL ENGINEERING
by
Shubham Kotia Jatin Bhatia Amol Vats
50525511016 40825511016 40525511016
Aakash Sharma
25511016
Guided by
Mr. Jitender
Kumar Assoc.
Professor
DEPARTMENT OF ELECTRICl ENGINEERING, JIMS
ENGINEERING MANAGEMENT TECHNICAL CAMPUS
(AFFILIATED TO GURU GOBIND SINGH INDRAPRASTHA UNIVERSITY,
DELHI) DELHI – 110089
NOVEMBER 2019
CANDIDATE’S DECLARATION
It is hereby certified that the work which is being presented in the B. Tech Major Project Report
entitled "Automatic Car Parking System" in partial fulfilment of the requirements for the
award of the degree of Bachelor of Technology and submitted in the Department of Electrical
Engineering of JIMS ENGINEERING MANAGEMENT TECHNICAL CAMPUS (Affiliated
to Guru Gobind Singh Indraprastha University, Delhi) is an authentic record of our own
work carried out during a period from SEPTEMBER 2019 to NOVEMBER 2019 under the
guidance of MR. JITENDER KUMAR, ASST. PROFESSOR.
The matter presented in the B. Tech Minor Project Report has not been submitted by me
for the award of any other degree of this or any other Institute.
(SHUBHAM KOTIA) (JATIN BHATIA) (AMOL VATS)
(En. No:50525511016 (En. No: (En. No:
40825511016) 40525511016)
(AAKASH SHARMA)
(En. No:)
This is to certify that the above statement made by the candidate is correct to the best of my
knowledge. They are permitted to appear in the External Minor Project Examination.
Mr. Jitender Kumar
Asst. Professor
(Signature of External
Examiner)
Project Coordinator Project Coordinator
ACKNOWLEDGMENT
ABSTRACT
We express our deep gratitude to Mr. Jitender Kumar, Department of Electrical
Engineering for his valuable guidance and suggestion throughout our project work.
We would like to extend my sincere thanks to Head of the Department, Mr. S.
Padmanabhan for his time to time suggestions to complete our project work.
Sign Sign Sign
(Shubham Kotia) (Jatin Bhatia) (Amol Vats)
(En. No:50525511016) (En. No: 40825511016) (En. No:
40525511016)
(Aakash Sharma)
(En. No: )
TABLE OF CONTENTS
CANDIDATE DECLARATION Iii
ABSTRACT Iv
ACKNOWLEDGEMENT Vii
TABLE OF CONTENTS ix – xiv
LIST OF FIGURES xv – xvi
LIST OF TABLES xvii - xviii
LIST OF ABBREVIATIONS Xix
LIST OF SYMBOLS xx – xxii
LIST OF FIGURES
ABSTRACT
This report demonstrates a prototype development of Automatict Car Parking using
PLC and SCADA.
PLC is one of the mostly used controllers as it is easy to operate and controls task
according to the program which is already fixed. In today’s scenario where
maximum people use cars, the biggest question arises if the car would be parked or
how it can be parked, in addition to that the user wants to park the car at ease
without facing problem in finding a vacant and safe parking lot.
Also, the automatic car parking allows the use of automation as no manpower is
required to control the entry barrier or the exit barrier.
Therefore, the concept of automatic car parking is appropriate enough to make the
city smart at an initial level.
● Keywords— PLC, Relay, DC Motor, Proximity Sensor, LED Indicator, LED
Strip.
SD 1 Sample Distribution System 1
SD 2 Sample Distribution System 2
ANN Artificial Neural Network
WT Wavelet Transform
WPT Wavelet Packet Transform
DWT Discrete Wavelet Transform
CWT Continuous Wavelet Transform
ANN Artificial Neural Network
GT Gabor Transform
MBWT M – Band Wavelet Transform
DTCWT Dual Tree Complex Wavelet Transform
MLP Multi-Layer Perceptron
LIST OF SYMBOLS
TC : Total Classification Error (%)
err
N : Number Of Misclassified Sample
ms
NS : Total Number Of Samples
L : Location Error
err
DO : Output Distance Calculated
The student should write the chapters of the B. Tech Project Report in this format. The
CHAPTER
report may consist of maximum five (05)1: INTRODUCTION
chapters.
1.0 INTRODUCTION
The student should write introduction of the project.
1.1 Electrical Engineering
The student should write sub- heading and explain the sub – topics in this format.
2.0 MOTIVATION
The motivation of the project includes the literature survey carried out to
complete the project.
3.0 OBJECTIVE
The objective of the project should be in bullets.
4.0 SUMMARY OF THE REPORT
Student should write about the content of the report what is included in all chapters.
Chapter 2: It should give the description about the
project. Chapter 3: Results & Discussion
Chapter 4: Conclusion
❖ Figures Should Be Represented in the following format:
Figure 1.4: Radial Distribution System.
❖ Tables Should Be Represented in the following format:
TABLE 1.1: Zone-wise Categorization of Sample Distribution 1
Zone Nodes
Zone 1 1-4
Zone 2 5, 6 & 13
[1] M. M. Saha, Ratan Das, et-al, “Review of fault location techniques for distribution
REFERENCES
systems,” Power Systems and Communications Infrastructures for the future,”
Beijing, pp.1-6. Sept. 2002.
[2] (Basic Book/Monograph Online Sources) J. K. Author. (year, month, day). Title
(edition) [Type of medium]. Volume (issue). Available: http://www.(URL)
[3] Letter Symbols for Quantities, ANSI Standard Y10.5-1968.
