KREBS millMAXTM Technology
Reverse Taper Roller Bearings High Performance Centrifugal High Radial Vanes
• Increases effective load Dry Gland Seal
span to improve life • Clears large solids
Large expeller diameter
generates high suction level • Reduces casing slurry
• Main bearing failure is due
to under greasing sealing capacity pressure at the eye of
the impeller
• Pumping action of taper
rollers discharges grease to
the outside, preventing
ingress of slurry External Wear
Adjustment Screw
• Four screws for
on-line wear
clearance adjustment
Patented Suction Side Sealing:
Adjustable Wear Ring
• Wear ring takes up
clearance at the
Water Flush Gland impeller
• Adjusted while pump
is in operation
Full Flow
• Reduces suction side
No adjustment of impeller recirculation
once the pump is installed
• Maintains hydraulic
performance
Narrow Clearance Wide Clearance
Reduces pressure at gland • Increased wear life
to assist centrifugal dry • Reduced power consumption
gland seal or reduce gland
water pressure.
Low Flow
Tucson, Arizona USA Queensland, Australia Sao Paulo, Brasil Beijing P.R. China Manila, Philippines www.flsmidthkrebs.com
Tel: +1 520 744 8200 Tel: +61 7 5519 5700 Tel: +55-15-3416-7400 Tel: +86-10 8468 9100 Tel: +63-2-687-9251
E-mail: [email protected] [email protected] [email protected] [email protected] [email protected]
Copyright © 2016 FLSmidth A/S. ALL RIGHTS RESERVED. FLSmidth
is a (registered) trademark of FLSmidth A/S. This brochure makes
Neusiedl am See, Austria Western Australia Santiago, Chile Chennai, India Johannesburg, South Africa no offers, representations or warranties (express or implied), and
Tel. +43 2167 3345 Tel: +61 8 6258 4800 Tel: +56 2 2463 8350 Tel: +91 44 4748 1000 Tel. +27 (0)10 210 4750 information and data contained in this brochure are for general
reference only and may change at any time.
[email protected] [email protected] [email protected] [email protected] [email protected]
rev: 7/22/2016 ljr-us
