Circularly Polarized Microstrip Antennas
Prof. Girish Kumar
Electrical Engineering Department
IIT Bombay
gkumar@[Link]
(022) 2576 7436
Circularly Polarized (CP) Dual Feed MSA
(a) (b)
Dual-feed (a) SMSA and (b) CMSA
Square MSA with Dual Feed
Left- and right-hand circularly
polarized field components (EL
and ER) in the φ = 0° and 90°
planes at 3.0 GHz
L = 3 cm, r = 2.55, h = 0.159 cm and tanδ = 0.001
Two Feeds at x = 0.5 cm with 1/00 and
at y = 0.5 cm with 1/900 for LHCP
Square MSA with Dual Feed for Different
Substrate Parameters
(——) r = 2.55 and h = 0.159 cm, L = 3cm, x = y = 0.5cm
(- - -) r = 2.55 and h = 0.318 cm, L = 3cm, x = y = 0.6cm
(– –) r =1 and h = 0.5 cm, L = 4.5cm, x = y = 1.4cm
SMSA Integrated with Dual Feed
(a)
(b)
SMSA with (a) offset feed and (b) 3-dB 2-branch line coupler
CP Suspended CMSA with Dual Feed
Frequency Range: 2.7-2.9GHz (7%)
Patch diameter = 52mm
Ground plane diameter = 90mm
Substrate - RT Duroid 5870
(r = 2.33, h = 0.8 mm, tanδ= 0.0012)
4mm
Foam Via
Feed
Ground Plane
CP Suspended CMSA – S11 and AR
BW for |S11 | -15dB BW for AR 3dB
= 2.62 - 3.10GHz (17%) = 2.56 - 3.15GHz (21%)
CP CMSA – Gain and Radiation Pattern
Max Gain = 6.2dBi LHCP Radiation
Pattern at 2.8GHz
Various Single Feed CP MSAs
L2
(a) (b) (c)
L1 L L
(d) (e) (f)
L L L
(a) Diagonal fed nearly square. Square with (b) two
stubs, (c) two notches, (d) two corners chopped, (e)
square notches at two corners, and (f) diagonal slot.
Diagonal Fed Nearly Square MSA
L1 = 3cm, Feed position = (0.15 L1, 0.15 L2)
L2
r = 2.55, h = 0.159cm and tanδ = 0.001
L1
Input impedance, VSWR and AR plots for three values of
L2: ( - - - ) 2.9, ( —— ) 2.92, and ( – - – ) 2.95 cm - LHCP
Nearly Square Ring MSA
Nearly square ring MSA with (a) coaxial feed and
(b) quarter-wave transformer.
Variations of CMSAs and ETMSAs
(a) Elliptical MSA and CMSA with (b) two notches, (c) two stubs,
and (d) a rectangular slot in the centre.
(a) Nearly ETMSA, (b) tip-truncated ETMSA, (c)ETMSA with a
rectangular slot, and (d) ETMSA with a notch.
Compact CP Square MSA with Slits
(a) (b)
(a) SMSA with two pairs of unequal slits and
(b)SMSA with corners chopped and four bent slits
Application – GPS (1575 + 10 MHz) antenna, RHCP
Compact CP CMSA with Slits
(a) (b)
(c) (d) (e)
Compact CMSA with (a) cross slot and (b) curved slot with tuning
stub. Annular ring MSA with (c) an internal offset polarizer and
slits in the (d) outer and (e) inner circles
Gap-Coupled Broadband CP MSA
(a)
(b)
(a) Three gap-coupled and (b) five gap-coupled
square patches with orthogonal feeds for CP
Stacked Broadband CP SMSA
(b)
(a)
(a) Top and (b) side views of two stacked square patches
Aperture- Coupled Broadband CP MSA
(a)
(b)
(a) Square patch with two orthogonal cross slots of
unequal lengths and (b) its measured input
impedance plot.
CP Array using Linearly Polarized Elements
Two linearly polarized rectangular patches with 90°
rotation and phase difference of 0°, 90°, 180°, and 270°
2-Elements Sequentially Rotated Array using CP MSAs
(a) (b)
(a) Sequentially rotated array of two CP circular elements
and (b) superimposed CP response of the two elements
4-Elements Sequentially Rotated Array using CP MSAs
Sequential array of four CP elements with 90° rotation
and phase difference of 0°, 90°, 180°, and 270°.
CP Array using CP Elements – VSWR and AR
2 × 4 arrays of circular
patches with two notches:
conventional and
sequentially rotated.
Measured VSWR and AR plots
( - - - ) conventional and ( —— ) sequentially rotated.
