Scribd
Upload
72 views2 pages

Submersible Borehole Pump Details

This document provides product details for a submersible borehole pump. The pump is suitable for pumping clean water and can be installed vertically or horizontally. It is fitted with a 15 kW motor and has a rated flow of 46 cubic meters per hour and a rated head of 78 meters. The materials for the pump, impeller, and motor are all stainless steel.

Uploaded by

atiek za
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
72 views2 pages

Submersible Borehole Pump Details

This document provides product details for a submersible borehole pump. The pump is suitable for pumping clean water and can be installed vertically or horizontally. It is fitted with a 15 kW motor and has a rated flow of 46 cubic meters per hour and a rated head of 78 meters. The materials for the pump, impeller, and motor are all stainless steel.

Uploaded by

atiek za
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

Company name:

Created by:
Phone:

Date: 16/05/2020
Qty. Description
1 SP 46-9

Note! Product picture may differ from actual product


Product No.: 15A21909

Submersible borehole pump, suitable for pumping clean water. Can be installed vertically or horizontally. All steel
components are made in stainless steel, EN 1.4301 (AISI 304), that ensures high corrosive resistance. This pump
carries drinking water approval.
The pump is fitted with a 15 kW MS6000 motor with sand shield, mechanical shaft seal, water-lubricated journal
bearings and a volume compensating diaphragm. The motor is a canned type submersible motor offering good
mechanical stability and high efficiency. Suitable for temperatures up to 40 °C.
The motor is fitted with the Grundfos Tempcon sensor that, by use of powerline communication together with a
MP204 control panel, enables temperature monitoring.
The motor is for direct-on-line starting (DOL).

Liquid:
Pumped liquid: Water
Maximum liquid temperature: 40 °C
Max liquid t at 0.15 m/sec: 40 °C
Selected liquid temperature: 20 °C
Density: 998.2 kg/m³

Technical:
Pump speed on which pump data are based: 2900 rpm
Rated flow: 46 m³/h
Rated head: 78 m
Shaft seal for motor: CER/CARNBR
Approvals on nameplate: CE,GOST2
Curve tolerance: ISO9906:2012 3B
Motor version: T40

Materials:
Pump: Stainless steel
EN 1.4301
AISI 304
Impeller: Stainless steel
EN 1.4301
AISI 304
Motor: Stainless steel
DIN W.-Nr. 1.4301
AISI 304

Installation:
Pump outlet: RP3

Printed from Grundfos Product Centre [2020.05.001] 1/2


Company name:
Created by:
Phone:

Date: 16/05/2020
Qty. Description
Motor diameter: 6 inch

Electrical data:
Motor type: MS6000
Rated power - P2: 15 kW
Power (P2) required by pump: 15 kW
Mains frequency: 50 Hz
Rated voltage: 3 x 380-400-415 V
Rated current: 34.5-33.5-33.5 A
Starting current: 490-540-570 %
Cos phi - power factor: 0.85-0.82-0.79
Rated speed: 2860-2870-2880 rpm
Start. method: direct-on-line
Enclosure class (IEC 34-5): IP68
Insulation class (IEC 85): F
Built-in temp. transmitter: yes
Motor No: 78195516

Others:
Minimum efficiency index, MEI ≥: 0.40
ErP status: EuP Standalone/Prod.
Net weight: 82.2 kg
Gross weight: 116 kg
Shipping volume: 0.264 m³
Danish VVS No.: 388462009

Printed from Grundfos Product Centre [2020.05.001] 2/2

You might also like