Scribd
Upload
127 views1 page

Multi-Standard Modulator With VHF/UHF Upconverter: Parameter Value Modulation Standard

The document describes a multi-standard modulator that supports modulation standards like DTMB, DVB-T/H, and ISDB-T. It has a VHF/UHF upconverter, programmable output level, and bidirectional DVB-ASI port. The modulator has a PCI interface and is used for applications like RF test generation and modulator replacement.

Uploaded by

dkchqmp
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
127 views1 page

Multi-Standard Modulator With VHF/UHF Upconverter: Parameter Value Modulation Standard

The document describes a multi-standard modulator that supports modulation standards like DTMB, DVB-T/H, and ISDB-T. It has a VHF/UHF upconverter, programmable output level, and bidirectional DVB-ASI port. The modulator has a PCI interface and is used for applications like RF test generation and modulator replacement.

Uploaded by

dkchqmp
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

DTA-115

Multi-Standard Modulator ‰ DTMB, DVB-T/H, ISDB-T, QAM-A/B/C

with VHF/UHF Upconverter ‰ Programmable Output Level


‰ Bi-directional DVB-ASI Port

FEATURES
• Multi-standard modulator with support
for most QAM- and OFDM-based
modulation standards
• Supports all constellations and modula-
tion modes for each supported stan-
dard
• All-channel upconverter 47 .. 862MHz
covering full VHF and UHF band
• Output amplifier with programmable
0 .. 31.5dB attenuator in 0.5dB steps
• Monitor output for direct connection to
the antenna input of a digital receiver APPLICATIONS
• Bi-directional DVB-ASI port 1. RF test generator
• Programming interface (DTAPI) is fully 2. Modulator replacement
compatible with other DekTec digital- 3. RF output for your (OEM) application
video output adapters
• PCI rev 2.2, 32 bit, 33 or 66 MHz bus

KEY ATTRIBUTES
MODULATION STANDARDS
Parameter Value
Bandwidth 5.0 .. 8.0MHz Modulation Standard

Main Connector 50Ω BNC DTMB GB 20600-2006


Out- Return Loss ≥15dB (47 .. 862MHz) DVB-T / DVB-H EN 300 744
put
Range 47 .. 862MHz ±1ppm ISDB-T ARIB STD-B31
Step Size adjustable, ≥100kHz QAM J.83 Annex A/B/C
Level (QAM) -31.5 .. 0dBm ±1dB
Level -34.5 .. -3dBm ±1dB ORDERING INFORMATION
(OFDM)
Type Description
Phase Noise <-90dBc @ 10kHz
DTA-115-SP Multi-Standard VHF/UHF
Spectral Pu- >50dB (47 .. 862MHz) Modulator with StreamX-
rity
press
Moni- Connector 75Ω F
DTC-370-ISDB ISDB-T software option
tor Return Loss ≥15dB (47 .. 862MHz)
Out- DTC-374-DTMB DTMB software option
put Level (QAM) -27.5dBm ±2dB
Bundles
Level -30.5dBm ±2dB
(OFDM) DTA-115-ISDB-SP DTA-115-SP, DTC-370-ISDB
DVB- Connector 75Ω BNC DTA-115-DTMB-SP DTA-115-SP, DTC-374-DTMB
ASI Return Loss ≥15dB (5 .. 270MHz)
The latest pricing information and a list of DekTec resellers can be
found on www.dektec.com. An OEM version of the DTA-115 is
available upon request; please contact DekTec for OEM condi-
tions.
© 2007 DekTec Digital Video BV
Streams of Ideas
www.dektec.com DTA-115 Product Leaflet
March 2007

You might also like