DCP 200

Digital Cinema Processor

DCP 200

Features
• Digital Input for up to 16-Channels of audio

• Can be combined with QSC’s DXP (Digital

Expansion Processor) to create the most
powerful networked audio solution for
cinema A Cinema Processor and Booth Monitor along with network
control and monitoring of DSP, amplifiers and speakers in one
• Networked audio I/O via CobraNet™ —
supports behind-the-screen mounting of integrated package.
DXP processors for screen channel and
subwoofer DCA amplifiers
QSC’s Digital Cinema Processor, the DCP processor. Connections to DCA amplifiers for
• Network control and monitoring via SNMP
200, builds on the legacy of DCM and input and monitor signals are made through
• Serial automation control via RS-232 DXP to provide all booth-mounted signal a single QSC DataPort / VGA-style cable. All
processing and monitoring functions for traditional XLR and barrier strip terminations
• Analog Inputs for film processors, non-sync Digital Cinema systems that use DXP and are eliminated. DCPs simplify set-up by
and Mic/Line DCA amps behind the screen. The DCP using a menu-driven, PC-based software
200 offers most of the features of the DCP program for configuration. Connection to
• Master volume and full 1/3 Octave Graphic 300 but at a lower price point for systems remote-mounted DXP processors is via RJ45
EQ on all channels (except subwoofer) that don’t require screen channel crossovers connectors and Cat. 5 cable. Commonly
• Booth Monitor with touch screen control for but instead utilize CobraNet network audio used configurations can also be saved on
easy operation distribution to additional DXP processors. a disk via USB cable to your PC, allowing
you to quickly load them on other DCPs.
Designed to be used with QSC’s Digital
• DataPorts for surround channel amplifiers All system configuration data is saved to an
Cinema Amplifiers (DCA) and featuring
SD memory card, allowing easy transfer of
• Compatible with all existing DCA amplifiers advanced DSP presets for QSC’s Digital
settings to a new DCP, should replacement
— thousands of DCA equipped screens Cinema Speakers (DCS), the DCP 200
ever be required.
are ready for full network monitoring and optimizes loudspeaker performance while
control simplifying cinema sound system wiring Advanced Monitor Functions
and configuration. The DCP 200 covers
cinema systems ranging from three to five In addition to audio monitoring of processor
• Dual power supplies with load sharing for
screen channels and up to 16 digital inputs. inputs and outputs, DCPs include QSC’s
seamless operation in the event of failure
Outboard DXP processors support passive, exclusive “load fault” detection. DCPs
• SD Memory card for quick unit swap — bi-amp, tri-amp or quad-amp crossovers monitor all surround amplifier outputs and
restores all settings and subwoofer outputs. The DCP 200 is indicate opens and shorts in the speaker
compatible with all analog cinema processor system, providing confirmation that all
• Multiple Bypass modes routes audio around amplifier outputs are functioning properly.
formats including Dolby® Digital Surround-
failed components to insure that the show In addition, the DCP detects all amplifier
EX and DTS-ES and features a 10-channel
will go on clipping, protect modes and heat sink
analog input for integration with existing
35 mm audio systems. temperature for reporting via SNMP or a
• QSControl and QSCreator allow for the
QSControl Ethernet monitoring system.
creation of custom control screens and
Digital Signal Processing QSControl and QSCreator allow for the
remote access for fault reporting and
creation of custom control screens and
diagnosis The DCP 200 digital signal processing
remote access for fault reporting and
capability outperforms traditional analog
• Easily integrates with existing film processors diagnosis. The NAC 100 Ethernet remote
processors for optimized audio performance.
for dual film/digital projection systems control panel provides remote operation
Fader level, 1/3 octave graphic EQ,
in a multiplex from anywhere on the local
parametric equalization, polarity, delay and
• Continued development of software and network.
gain can be precisely adjusted for each
firmware will add new capabilities to the
channel in your system. DXP processors
existing hardware with easy firmware
provide passive and active 2-way, 3-way and
updates
4-way crossovers.
• The DCP 200 is part of a new generation of Less Wiring, Faster Set-up
QSC products designed expressly for the
needs of D-Cinema sound systems DCPs greatly simplify system wiring and
set-up, significantly reducing installation
time and labor cost. Input to the DCP is
provided via standard DB-25 cables from
the D-Cinema server and/or 35mm cinema
DCP 200 Details
Front Panel Controls CobraNet RJ45s 100 Mbps primary/backup network audio

Power switch Rocker switch SD card receptacle Configuration memory card (1 GB min)

Mute control Push button H.I. and V.I. impaired outputs

Auditorium fader Rotary encoder Output stage type Single ended (balanced Z)

Monitor volume/parameter adjust Rotary encoder Output impedance 50 Ohms

Menu-driven LCD Touch control LCD Nominal output level -11.8 dBu (200 mVrms)

Rear Panel Connectors Loading requirements Rmin = 2k Ohms, Cmax = 4nF

D-Cinema input group 1 DB-25 — AES3/EBU channels 1-8 Audio network

D-Cinema input group 2 DB-25 — AES3/EBU channels 9-16 Protocol CobraNet version 2 protocol

Main analog input DB-25 — Analog audio channels 1-8 Data rate 100 Mbps (Fast Ethernet)

Extended surround input DB-25 — DB-25 - Surround and Le/Re Channels Ports 1 Primary, 1 Backup (auto-failover)

Cat-5 UTP cable or better (100m maximum length),

Universal Mic/Line input XLR — Mic (+ phantom pwr) or line level Connection requirements direct connection to wired network switch ports only,
dedicated LAN or VLAN

RCA — Stereo digital audio interface

S/PDIF input QSControl™ network/ SNMP
and Lt/Rt Matrix

RCA (2) — Stereo Left and Right Standard TCP/IP implementation over Ethernet or
RCA (L/R) inputs Protocol
and Lt/Rt Matrix Fast Ethernet

DataPort outputs HD-15 (6) — QSC amplifier interface Data rate 10/100 Mbps

6-pin Euro-style (x2) – TTL compatible dry Cat-5 UTP cable or better (100m maximum length),
Automation inputs
contact closure
Connection requirements direct connection to wired network switch ports only,
Logic output 4-pin Euro-style (x2) – outbound control dedicated LAN or VLAN

Relay outputs 6-pin Euro-style (x2) – outbound control Dimensions (H/W/D): 5.25" x 19" x 15.2" (133 mm x 483 mm x 386 mm)

Serial Control DB-9 RS-232 Serial Interface Line voltage requirements 100 VAC – 240 VAC, 50/60 Hz

USB Type B port Config and management interface

Weight 16.6 lb (7.5 kg)
QSControl RJ45 10/100 Mbps network management

All specifications are subject to change without notice.

1675 MacArthur Boulevard • Costa Mesa, CA 92626 • Ph: 800/854-4079 or 714/957-7100 • Fax: 714/754-6174 please recycle

© 2013 QSC Audio Products, LLC. All rights reserved. QSC and the QSC logo are registered trademarks of QSC Audio Products, LLC in the U.S. Patent
and Trademark office and other countries.

DCP 200 Spec Sheet 02/06/2013