JAIPUR ENGINEERING COLLEGE AND RESEARCH CENTRE
DEPARTMENT OF MECHANICAL ENGINEERING
SESSION - [2019-20]
COURSE: B.Tech. SEMESTER-VIII SECTION/BATCH:A/B/C
SUBJECT: CAD LAB. CODE: 8ME6A
DURATION: 30 Minutes MCQ/VIVA MM: 45
COURSE OUTCOMES
CO-1: To design different parts of mechanical components.
CO-2: To prepare models of various designing and Manufacturing Industries.
Instructions: ATTEMPT ALL SECTIONS.
SECTION-A [20*1.5=30]
Attempt all questions:
1. In auto cad all objects drawn on the
(a) XY Plane (b) YZ Plane (c) ZX Plane (d) ZX Plane
2. The key F9 toggles on/off:
(a) Ortho Snap (b) Snap (c) Grid (d) DYN.
3. To call the Line tool from the command line, the following abbreviation can be entered:
(a) lin b) li (c) l (d) ln
4. When entering absolute coordinate numbers at the command line, the coordinates are preceded by:
(a) The letter a (b) The symbol @ (c) The letters ab
(d) There is no need to enter anything in front of the coordinate numbers
5. A polar array creates new objects____
(a) In a circular pattern
(b) In a grid pattern
(c) In a straight line
(d) All of the above
6. When using the Stretch tool:
(a) Circles can be stretched into ellipses
(b) The tool has no effect upon circles
(c) Be careful because circles can be erased
(d) Treat circles like any other part of the drawing being stretched.
7. The Join tool can be used for joining:
(a) Any two arcs (b) Any two lines or plines
(c) Only arcs or lines in line with each other
(d) Any objects can be joined to each other.
8. How many SNAP points does an object have?
(a) 1 (b) 4
(c) 5 (d) Depend on object
9. Isometric drawing is:
(a) A true 3D (three-dimensional) pictorial view of the object being drawn
(b) A 2D (two-dimensional) pictorial view of the object
(c) An accurate perspective drawing of the object
(d) None of the items a, b or c.
10. Is it possible to form unions between solids constructed using the Extrude tool and solids formed
using the 3D Objects tools?
(a) Yes
(b) No
(c) Only when the 3D Objects tool is the Box or Sphere tool
(d) Only when the 3D Objects tool is the Cone tool.
11. When calling the Extrude tool the following abbreviation can be entered at the command line::
(a) ex
(b).extr
(c) There is no abbreviation. The name extrude must be entered in full
(d) ext.
12. Which command convert discrete objects in polyline
(a) Union
(b) Subtract
(c) Polyline
(d) Join
13. What is the difference between the Scale command from the command Zoom
(a) Scale for single object, while the Zoom whole plan
(b) No difference
(c)H Scale can grow / shrink a shape up 10 times, while the Zoom has no limits
(d) H Scale changes the size of objects, while the Zoom changes the visibility of the project
14. Which of the following is not a keyboard shortcut of AutoCAD?
(a) Ctrl + P
(b) Alt + F4
(c) Ctrl + F4
(d) Alt + B
15. Where should you pay attention when you are working with autocad commands?
(a) Drawing area
(b) Status bar
(c) Tool bars
(d) Command window
16. What do the letters UCS
(a) Uniform Calculator System
(b) United CAD System
(c) Universal CAD Settings
(d) Universal Coordinate System
17. The Polyline Edit tool can only be used when working with polylines:
(a) True (b) False
18. Print scale 1:50 means that
(a)The draft is 50 times less expensive than the original
(b) A 3 cm corresponds to half a meter
(c) A measure corresponds to 50 cm
(d) None of the above
19. How many points do you need to define for the rectangle command?
(a) One
(b) Two
(c) Three
(d) Four
20. Polar coordinates are used mostly for drawing_____
(a) Arc
(b) Ellipse
(c) Angular lines
(d) None of the above
SECTION-B [5*3=15]
Attempt all questions:
1. Differentiate CAD and CADD.
2. Define following command
(a) Mirror (b) Trim
3. Expain the advantages of CAD.
4. What is the use of Extrude command?
5. Can we use camara command in auto cad? If Yes or No explain.
![JAIPUR ENGINEERING COLLEGE AND RESEARCH CENTRE
DEPARTMENT OF MECHANICAL ENGINEERING
SESSION - [2019-20]
COURSE: B.Tech.](https://screenshots.scribd.com/Scribd/252_100_85/326/468492585/1.jpeg)
