Marking Systems

Tools
Mounting Material
2013 / 2014
5

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com

 PCB connection technology and electronics housing
• PCB terminal blocks and plug-in connectors
• Electronics housing

Connection technology for field devices

• Plug-in connectors
• Cables and connectors

Modular terminal blocks

• Modular terminal blocks

Sensor/actuator cabling and industrial plug-in connectors

• Sensor/actuator cabling
• Cables and connectors
• Plug-in connectors

Marking systems, tools,

and mounting material

Surge protection and power supply units

• Lightning monitoring system
• Surge protection and interference filters
• Power supply units and UPS
• Protective devices

Interface technology and switching devices

• Electronic switching devices and motor control
• Measurement and control technology • Monitoring
• Relay modules • System cabling for controllers

Control technology, I/O systems and automation infrastructure

• Ethernet networks • Functional safety • HMIs and industrial PCs • I/O systems
• Industrial lighting and signaling • Industrial communication technology
• Fieldbus components and systems • Wireless data communication
• Process infrastructure • Software • Controllers

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com

Table of contents

Product range in pictures 2

From here, you can access the desired product directly

System features 11
Marking systems, tools, and mounting material

Planning and marking software 21

Printing systems 29

Terminal marking 55

Marking
MARKING system Conductor and cable marking 153

Device marking 227

System marking 317

Hand tools 361

Tools
TOOL fox Automatic devices 467

Installation and Component mounting 483

mounting material Shielding
CABINET add-on Cable management

Technical information 584

Index 598

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com

 Marking systems, tools, mounting material
Product range in pictures

Planning and Printers - MARKING system

marking software

Planning and marking software BLUEMARK CLED for printing UniCard Printer set Thermal transfer printer for printing with
CLIP PROJECT Page 24 materials - as easy as printing on paper BLUEMARK CLED SET Page 33 segmented multi-ink ribbons
BLUEMARK CLED Page 33 THERMOMARK CARD PLUS Page 34

Thermal transfer printer for roll material Thermal transfer printer for shrink sleeves Plotter Plotter with engraving unit
THERMOMARK X1.2 Page 42 (double-sided printing possible) CMS-P1-PLOTTER Page 44 P1 ENGRAVING UNIT Page 45
THERMOMARK W2 Page 43

Zack marker strip terminal marking for tall UniCard terminal marking for a tall marker UniCard terminal marking for tall and flat UniSheet terminal marking for a universal
and flat marker groove, for printing groove, for printing with marker groove, for printing with marker groove, for printing with
with plotter THERMOMARK CARD THERMOMARK CARD THERMOMARK CARD
ZB... Page 68 UCT-TM... Page 82 UCT-TM... Page 82 US-TM... Page 90

Conductor and cable marking - MARKING system

Group marking Page 108 UniCard marking for terminal blocks from Aluminum cable marking for assembly with UniCard clip-on conductor marking, for print-
other manufacturers, for printing with BLUE- cable binders, for printing with BLUE- ing with BLUEMARK
MARK and THERMOMARK CARD MARK CLED UC-WMC... Page 162
Page 118 WMTB-AL... Page 161

2 PHOENIX CONTACT
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Marking systems, tools, mounting material
Product range in pictures

Thermal transfer printer for printing plastic Thermal transfer printer for roll material Thermal transfer printer for roll material Thermal transfer printer sets
material in UCT and US format THERMOMARK ROLL Page 38 THERMOMARK ROLL X1 Page 39 MARKING BOX Page 40
THERMOMARK CARD Page 35

Terminal marking - MARKING system

UniCard terminal marking for a tall marker UniCard terminal marking for tall and flat UniCard terminal marking for marking stud Zack marker strip terminal marking for a tall
groove, for printing with BLUEMARK marker groove, for printing with BLUEMARK holders, for printing with BLUEMARK marker groove, for printing with plotter
UC-TM... Page 58 UC-TM... Page 58 UC-TMN... Page 66 ZB... Page 68

UniSheet terminal marking for tall and flat Self-adhesive marker strips for terminal Marker strips for terminal marking, for tall Self-adhesive marker strips for terminal
marker grooves, for printing with blocks without a marker groove, for printing and flat marker grooves, for printing with blocks without a marker groove, for printing
THERMOMARK CARD with THERMOMARK ROLL THERMOMARK ROLL with THERMOMARK ROLL
US-TMF... Page 91 US-TML... Page 92 TMT... Page 94 TML... Page 106
UCT1... UCT5-TM... Page 128

UniCard conductor marking for threading, for Conductor marking with ferrules that can be UniCard conductor marking for marking col- UniCard cable marking for assembly with ca-
printing with BLUEMARK labeled, for printing with BLUEMARK lars, for printing with BLUEMARK ble binders, for printing with BLUEMARK
UC-WMCO... Page 170 AI-WM... Page 175 UC-WMT... Page 176 UC-WMTB... Page 179
UC-WMTBA... Page 180

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 3

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Marking systems, tools, mounting material
Product range in pictures

UniCard conductor marking for threading, for UniSheet conductor marking for marking col- UniSheet cable marking for assembly with Self-adhesive conductor marking with trans-
printing with THERMOMARK CARD lars, for printing with THERMOMARK CARD cable binders, for printing with parent protective foil, for printing with
UCT-WMS... Page 186 US-WMT... Page 187 THERMOMARK CARD THERMOMARK ROLL
US-WMTB... Page 190 WML... Page 194

Cable marking for assembly with cable bind- Cable markers for marking cables and con- Plastic cable markers for insert labels Halogen-free conductor and cable marking
ers, for printing with THERMOMARK ROLL ductors with larger cross sections KMK... Page 214 for assembly with cable binders
WMTB... Page 211 SD-WMTBS... Page 221 WMTB-HF... Page 212

Aluminum device marking that can be UniCard stick-on device marking with high UniCard device marking for screwing or riv- Marker carriers for
snapped into marker carriers, for printing adhesive strength, for printing with eting, for printing with BLUEMARK UC-EMP .../US-EMP ... snap-in labels, for
with BLUEMARK CLED BLUEMARK UC-EMSP... Page 236 printing with BLUEMARK Page 296
EMP-AL... Page 233 UC-EMLP... Page 234 PATO... Page 225

Device marking for snapping into marker car- Stick-on device marking and additional Stick-on device marking for marking with Stick-on device marking, for printing with
riers, for printing with THERMOMARK screws or rivets, for printing with THERMOMARK CARD THERMOMARK ROLL
CARD THERMOMARK CARD US-EML... Page 268 EML... Page 270
P-SS-ZB.../ P-ZB... Page 298 US-EMLSP... Page 267

4 PHOENIX CONTACT
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Marking systems, tools, mounting material
Product range in pictures

Self-adhesive conductor marking with flags Pre-assembled shrink sleeves, for printing Insert conductor marking for marking collars, Conductor marking for threading, for printing
WML-FLAG... Page 198 with THERMOMARK ROLL for printing with THERMOMARK ROLL with THERMOMARK ROLL
WMS... Page 200 EMT... Page 208 WMT... Page 210

Device marking - MARKING system

Stainless steel cable marking Marking collars for insert labels Stick-on aluminum device marking, for Aluminum device marking to be screwed in
SD-WMTBS...VA Page 222 PATG... Page 224 printing with BLUEMARK CLED or riveted, for printing with
PATO... Page 225 EMLP-AL Page 231 BLUEMARK CLED
EMSP-AL... Page 232

UniCard device marking that can be UniCard snap-in device marking, for printing UniSheet stick-on device marking, for print- UniSheet device marking that can be
snapped into marker carriers, for printing with BLUEMARK ing with THERMOMARK CARD snapped into marker carriers, for printing
with BLUEMARK UC-EM... Page 240 US-EMLP... Page 258 with THERMOMARK CARD

UC-EMP... Page 237 US-EMP... Page 262

Stick-on device marking, for printing with Stick-on device marking, can be engraved or Highly flexible stick-on PVC device marking, Stick-on device marking for rough or struc-
THERMOMARK ROLL marked, for printing with THERMOMARK for printing with THERMOMARK ROLL tured surfaces, for printing with
EMLP... Page 274 ROLL EMLF... Page 278 THERMOMARK ROLL
EMLP 24... Page 276 EML-HA... Page 280
EMLP 30... Page 277

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 5

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Marking systems, tools, mounting material
Product range in pictures

Stick-on device marking for high-tempera- Stick-on device marking, for ESD applica- Stick-on device marking, removable, for Stick-on device marking for anti-tamper pro-
ture applications, for printing with tions, for printing with printing with THERMOMARK ROLL... tection, for printing with
THERMOMARK ROLL THERMOMARK ROLL... EML-RM... Page 286 THERMOMARK ROLL
EML-HT... Page 282 EML-ESD... Page 284 EMLS... Page 288

System marking - MARKING system

Stick-on warning labels, preprinted and for Stick-on warning labels, with lightning flash Stick-on prohibition signs, preprinted and for Stick-on mandatory signs, preprinted and for
printing with THERMOMARK and warning instruction printing with THERMOMARK printing with THERMOMARK
US-PML-W... Page 320 PML-W301... Page 324 PML-P101... Page 328 PML-M101... Page 336

Hand tools - TOOL fox

Cable cutter Cable cutter with ratchet function for UNIFOX VDE combination pliers Cable binder tools for plastic and stainless
CUTFOX... Page 364 minimum effort UNIFOX-CE VDE... Page 368 steel cable binders
CUTFOX... Page 364 UNIFOX-CT... Page 369

WIREFOX stripping tools, angled WIREFOX stripping tools WIREFOX stripping tool Stripping tool for coaxial cables
WIREFOX... Page 378 WIREFOX... Page 378 WIREFOX-D... Page 386 WIREFOX-D... Page 386

6 PHOENIX CONTACT
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Marking systems, tools, mounting material
Product range in pictures

UniCard snap-in device marking for UniCard device marking that can be Stick-on device marking, can be engraved or Marker carrier for buttons and control
Axioline E series, for printing with snapped into marker carriers, for printing labeled with writing devices
THERMOMARK ROLL with BLUEMARK GPE... Page 294 CARRIER-EMP 22... Page 296
EMT...R Page 290 CARRIER-EMLP 22... Page 297
UC-EMP... Page 237

Stick-on pipeline markers, for printing with Stick-on hazardous substances labels, pre- Stick-on combi labels, for printing with Magnetic label, unprinted, for printing with
THERMOMARK ROLL... printed and for printing with THERMOMARK THERMOMARK CARD... THERMOMARK ROLL...
PML-T101... Page 342 PML-GHS101... Page 350 US-EMLF... Page 354 PMM... Page 356

CUTFOX cable duct cutter Cable duct cutter Profile cutters MICROFOX pliers for all electronics applica-
CUTFOX-CD Page 371 PPS CD M Page 371 PPS... Page 372 tions
MICROFOX... Page 374

Stripping tool for solar cables CRIMPHANDY - portable hand-held machine, CRIMPFOX crimping pliers for ferrules Crimping pliers for connectors
WIREFOX-D SR... Page 387 for stripping and crimping in just one step CRIMPFOX... Page 392 CRIMPFOX-RCI... Page 398
CRIMPHANDY Page 388

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 7

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Marking systems, tools, mounting material
Product range in pictures

Basic pliers for accommodating various Crimping pliers for solar connectors Basic pliers for accommodating various Screwdrivers
crimp inserts CRIMPFOX-SR... Page 410 coaxial crimp inserts SZS... Page 416
CRIMPFOX-C50 Page 403 CRIMPFOX-M... Page 412

Voltage and continuity tester Digital current probe multimeter Tool sets Ferrules, slip-on sleeves, cable lugs,
DUSPOL... Page 434 TESTFOX... Page 435 TOOL... Page 438 ring cable lugs
AI... Page 445
C... Page 454

Mounting material - CABINET add-on

DIN rails Snap-on end brackets without screws Cover profiles Power, branch, and L/N/PE connection
NS... Page 486 CLIPFIX... Page 498 EA... Page 506 terminal blocks
AP... Page 504 AK.../AKG... Page 510
A/U... Page 505 EK... Page 509
AZK 35... Page 509

CES cable entry system Cable ducts and accessories DIN rail with cable clamps Protective hoses made of plastic
CES... Page 532 CD... Page 543 WCC... Page 547 WP... Page 548

8 PHOENIX CONTACT
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Marking systems, tools, mounting material
Product range in pictures

SCREWFOX torque screwdrivers SCREWFOX cordless screwdrivers SCREWFOX preset torque screwdrivers SCREWFOX universal control cabinet keys
TSD-M... Page 424 SF-ASD Page 425 TSD... Page 432 SF-CCK... Page 433

Automatic devices - TOOL fox

Automatic cutting device for conductors and Stripping machine Portable crimping machine for ferrules, Portable stripping and crimping machine for
cables WF 1000... Page 471 cable lugs, and connectors taped products
CUTFOX 10... Page 470 CF 500... Page 474 CF 3000... Page 478

Europe terminal blocks and junction box Sockets with a 45 mm standard pitch Shield connection clamps Support for single-sided shielding
connectors SD-D... Page 518 SK... Page 522 AB-SK... Page 524
EC... Page 512 AB/SS... Page 528
JBC... Page 516

Screw connections for protective hoses Spiral hoses Plastic cable markers for insert labels Cable binders Page 574
WP-G HF... Page 550 WG-S HF... Page 565 KMK... Page 572

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 9

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Marking systems, tools, mounting material
System features at a glance

Marking systems, tools, and mounting material

Optimize all of the processes involved in the setup, installation, and maintenance of
your control cabinets and switchgear. We can help you achieve this with perfectly co-
ordinated products from our marking, tool, and mounting material ranges. In this
catalog you will find everything you need for marking, securing, and mounting your
control cabinet components.

10 PHOENIX CONTACT
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Marking systems, tools, mounting material
System features at a glance

MARKING system
MARKING system provides the perfect
solutions for terminal, conductor, cable, de-
vice, and system marking. It places at your
disposal the CLIP PROJECT planning and
marking software, various printing systems,
and a wide variety of marking materials.

TOOL fox
TOOL fox is the complete range of profes-
sional processing and measuring tools.
Designed for use in all processes in electrical
engineering, the tools and automatic devices
impress with their optimum handling and
quality.

CABINET add-on
CABINET add-on stands for modern
control cabinet technology. DIN rails and
end brackets ensure the secure attachment
of terminal boards and modules, while shield
connection clamps guarantee
EMC-compliant system wiring and cable
ducts bring order to the control cabinet.

Service
Choose the complete range. Working to
your specifications, we will manufacture and
label terminal strips and complete terminal
boxes or modules for direct installation in
your application.

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 11

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Marking systems, tools, mounting material
System features at a glance

MARKING system
MARKING system is the intelligent solution for quick and easy terminal, conductor, ca-
ble, device, and system marking. The marking data is transferred from the CLIP PROJECT
planning and marking software to the printers at the click of a mouse. Whether your print-
ing system involves a BLUEMARK CLED high-speed printer, a thermal transfer printer or
a plotter, a wide range of marking material is available.

12 PHOENIX CONTACT
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Marking systems, tools, mounting material
System features at a glance

Terminal marking
Terminal markers are available marked
and unmarked in UniCard and UniSheet
format as well as in roll and sheet form.
Our marking service also enables terminal
markers to be printed according to cus-
tomer specifications.

Conductor and cable marking

Conductors and cables can be marked in
numerous different ways. The markers can
either be threaded on, pushed on, clipped
on, adhered in place or attached with cable
binders. They are available unprinted or
can be ordered from our marking service
printed according to customer
specifications.

Device marking

Various device markers are available for

the optimum and individual marking of
control cabinets, switchgear, and their
components. Our marking service also
enables markers to be printed according
to customer specifications.

System marking
Numerous safety markings are available
for the clear and comprehensive marking
of systems. These are available unprinted
or can be custom-printed by our marking
service according to customer
specifications.

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 13

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Marking systems, tools, mounting material
System features at a glance

TOOL fox
TOOL fox consists of the full range of professional processing and measuring tools for
all electrical engineering applications. The ergonomically designed tools for cutting, strip-
ping, crimping, screwing, and testing impress with their optimum handling and quality.
Specially hardened tool steels ensure maximum durability. Cutting devices, stripping
machines, and crimping machines can be used to automate work steps.

14 PHOENIX CONTACT
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Marking systems, tools, mounting material
System features at a glance

Cutting tools
The use of professional cutting tools
should result in a precise intersection
without deforming the conductor. Our
precision cutting tools meet this require-
ment and are suitable for cables up to
100 mm in diameter.

Stripping tools
Correct stripping and dismantling can
only be achieved with professional stripping
tools. Special geometries and hardened
blades ensure accurate results every time.
Automatic conductor cross section setting
provides reliable protection against damage
to the conductors.

Crimping tools
Once they have been stripped, cable
ends can be equipped with various ferrules
and a range of connectors. Professional
crimping pliers are available for this pur-
pose. These guarantee long-term, stable,
and gas-tight high-quality crimping for all
conductors and cables up to 120 mm2.

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 15

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Marking systems, tools, mounting material
System features at a glance

CABINET add-on
CABINET add-on stands for modern control cabinet technology which ensures that con-
trol cabinets and switchgear can be set up quickly and take up as little space as possible.
DIN rails and end brackets ensure the secure attachment of electrical connecting elements
and components. Shield connection clamps guarantee EMC-compliant system wiring. The
cable management product range spans from the innovative CES space- and cost-saving
cable entry system, across the extensive range of cable protection systems and cable ducts,
right up to cable binders for every application.

16 PHOENIX CONTACT
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Marking systems, tools, mounting material
System features at a glance

Component mounting
You can save time when securing electri-
cal connections and components in switch-
gear by using suitable mounting devices. In
addition, you can make optimum use of the
space in the control cabinet by combining
mounting accessories.

Shielding

A wide selection of shield connection

clamps, neutral busbars, and supports guar-
antees that the wiring of the control cabinet
or the switch system complies with EMC
regulations and also ensures optimum
wiring convenience.

Cable entry system

The CES cable entry system allows you

to insert a variety of pre-assembled con-
ductors, cables, and protective hoses into
areas with limited space in control cabinets,
distributor boxes or devices, in a way
which protects them against water and
dust.

Cable bundling and cable routing

Use cable ducts to bring order to your

control cabinet. Cable clamps are used to
fix the cables running from the field. The
conductors are bundled together quickly
and easily using plastic cable markers and
routed into the cable ducts. Protective
hoses provide the right cable protection
for every application.

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 17

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Marking systems, tools, mounting material
Service

Our services
At Phoenix Contact, trendsetting products are complemented by a comprehensive range
of services. Wherever you are in the world, our global network means that you can rely
on our service. Being at home all over the world and speaking the language of the user is
what we understand by customer proximity. We live up to this with more than 40
Phoenix Contact subsidiaries and in excess of 30 representatives in other countries.

18 PHOENIX CONTACT
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Marking systems, tools, mounting material
Service

Terminal strip production

Pre-assembled terminal strips enable you
to both streamline your process sequences
and save installation time. We supply your
terminal strips fully labeled.

Control box production

We can produce fully assembled control
boxes to your specifications. Our service
even includes putting together custom
product sets.

Labeling service
With CLIP PROJECT, the planning and
marking software, you can create labels to
suit your wishes. Just use the built-in e-mail
function to send the data to us, and we will
deliver ready-printed marking materials
directly to your production facility. Quick
and easy – all you have to do is mount the
materials.

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 19

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
20 PHOENIX CONTACT
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Planning and marking software - CLIP PROJECT

The CLIP PROJECT software consists of    

Product range overview  
two modules:
– CLIP PROJECT Planning enables the quick    
CLIP PROJECT planning and marking software 22
and convenient planning and configura-
tion of fault-free terminal strips.
– CLIP PROJECT Marking is a powerful       
piece of software for the creation of indi-   CLIP PROJECT advanced 26 
vidual labels for terminal blocks, cables,   CLIP PROJECT professional 27 
lines, devices, and systems.

Thanks to the optimum interaction be-

tween the two modules, even in connection
with electrical planning systems, the result
is an end-to-end process chain: from plan-
ning and documentation, right up to the fin-
ished terminal strip or the finished marking.

The advanced version, CLIP PROJECT

professional, also features an efficient tem-
plate designer, which can be used to design
custom labels.

PHOENIX CONTACT 21
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Marking and labeling - MARKING system
CLIP PROJECT planning and marking software

A consistent system from

configuration through
to the finished application
CLIP PROJECT combines the proven planning software for terminal strip configu-
ration with a high-performance marking tool. Direct data exchange with all conven-
tional CAE programs, along with the creation of the complete project documentation,
are what make this configuration software unique. CLIP PROJECT provides the perfect
output devices and marking materials for terminal, conductor, device, and system
marking. Quite simply, it is a single piece of software that is compatible with all printing
systems and can be used to label any type of application.

Configuration ... Production ...

Printing
systems
From high-speed
printers to univer-
sal lists.

22 PHOENIX CONTACT
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Marking and labeling - MARKING system
CLIP PROJECT planning and marking software

Complete
documentation
CLIP PROJECT cre-
ates complete order,
parts, structure, and
mounting lists at the
click of a mouse.

... Mounting

We make everything to suit

your requirements
With CLIP PROJECT, you can
create markers or complete termi-
nal strips in accordance with your
specifications. Just send the data
to us using the built-in
e-mail function.
We can provide markings that are
printed precisely to meet the re-
quirements of your application or
even completely labeled terminal
strips. Direct to your production
facility, quickly and easily - all you
need to take care of is installation.

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 23

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Marking and labeling - MARKING system
CLIP PROJECT planning and marking software

Marking module

During selection, the marking materials Interfaces to all CAE systems and spread- By integrating CLIP PROJECT into
are displayed as a preview for rapid product sheet and text processing programs are EPLAN P8, the labeling data for terminal,
selection. provided for the open exchange of data. conductor, and device marking can be auto-
matically taken from the circuit diagram.

24 PHOENIX CONTACT
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Marking and labeling - MARKING system
CLIP PROJECT planning and marking software

The online update immediately provides All Phoenix Contact output devices and Phoenix Contact provides a labeling
the user with new products and program standard office printers can be easily con- service. Orders can be placed by e-mail and
extensions for the marking and planning trolled with just one piece of software. all items printed and supplied to suit the
module. customer.

Planning module

During selection, all Phoenix Contact The automatic correction function checks The configured terminal strips can be
products which can be fitted on DIN rails the configured terminal strip and automati- distributed across several DIN rails in order
are displayed as a preview for rapid product cally adds any missing accessories. 2D and to determine the exact space requirements
selection. 3D design data are available at the click of a for installation.
mouse.

Complete documentation and an effec- By integrating CLIP PROJECT into Phoenix Contact provides a terminal strip
tive 3D preview are available for rapidly and EPLAN P8, terminal strips are automatically service. The terminal strips configured to
correctly producing the mechanical struc- produced from the circuit diagram in suit your requirements can be ordered using
ture of the terminal strips. CLIP PROJECT. The product data is written the e-mail function. Phoenix Contact will
back to the EPLAN parts lists using the two- supply the terminal strips promptly.
way interface.

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 25

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Marking and labeling - MARKING system
CLIP PROJECT planning and marking software
CLIP PROJECT advanced

The CLIP PROJECT advanced program

enables the quick planning and configuration
of terminal strips for the control cabinet
and field as well as custom-marking of ter-
minal blocks, cables, and lines, plus devices
and systems:
– Planning of terminal strips with compo-
nents of the CLIPLINE, INTERFACE,
TRABTECH, and AUTOMATION
product ranges
– The automatic correction function per-
forms a logical test of the terminal strips
and automatically adds the necessary ac-
cessories such as covers and end brackets
– The terminal strip configurator enables Technical data
the distributed arrangement of individual General data
terminal strips on different DIN rails Software interface EPLAN 5.7
– 3D preview and complete documentation EPLAN Electric P8
AUCOTEC ELCAD
of the assembled DIN rails, such as order AUCOTEC Engineering Base
AUCOTEC RUPLAN
and mounting lists. ZUKEN E³
– High-performance import of labeling in- Bentley Promis-e
WSCAD
formation and extensive design options IGE XAO
for the custom-labeling of terminal PC-Schematic AUTOMATION
SDProget SPAC
blocks, cables, and lines, as well as devices System requirements
and systems Operating systems MS Windows XP SP3, MS Windows Vista, MS Windows 7 (32/64-bit),
MS Windows 8 (32/64-bit)
– Numerous sorting and filter functions for
efficient management of your print jobs Ordering data
– Support for all marking materials and out- Pcs. /
Description   Type Order No.
put devices from Phoenix Contact Pkt.

– Automatic Internet update CLIP PROJECT advanced, planning and marking software,
German/English/French/Dutch/Italian/Spanish/Russian/Pol-
– Intuitive Windows® user interface ish/Hungarian/Czech/Turkish/Portuguese/Chinese and Japanese

To reduce engineering costs and improve CLIP-PROJECT ADVANCED 5146040 1

data quality, CLIP PROJECT advanced al-
lows two-way data exchange with electrical
planning systems:
– With the circuit diagram as the basis, the
required products are automatically se-
lected and their complete data written
back to the parts lists
– The labeling information can be automat-
ically exported and assigned to the de-
sired marking materials
– In order for the labeling to be assigned
clearly, even in the case of extensive proj-
ects, the project structure tree from the
CAE system has been adopted in
CLIP PROJECT; this also allows the label-
ing to be output to sub-projects

26 PHOENIX CONTACT
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Marking and labeling - MARKING system
CLIP PROJECT planning and marking software
CLIP PROJECT professional

The CLIP PROJECT planning and marking

software is available in both an advanced
and professional version:
– The professional version also includes an
efficient template designer, which can be
used to design signs of your choice and to
adapt existing material descriptions
– Graphics, various barcode types, and geo-
metric elements such as squares, circles,
and lines can be accessed for design work
– Data can also be imported into the tem-
plates from various data sources
– Rapid, simple, and flexible adaptation to
changing requirements
Technical data
General data
Software interface EPLAN 5.7
EPLAN Electric P8
AUCOTEC ELCAD
AUCOTEC Engineering Base
AUCOTEC RUPLAN
ZUKEN E³
Bentley Promis-e
WSCAD
IGE XAO
PC-Schematic AUTOMATION
SDProget SPAC
System requirements
Operating systems MS Windows XP SP3, MS Windows Vista, MS Windows 7 (32/64-bit),
MS Windows 8 (32/64-bit)

Ordering data

Pcs. /
Description   Type Order No.
Pkt.
CLIP PROJECT professional, planning and marking software,
with template designer, German/English/French/Dutch/Ital-
ian/Spanish/Russian/Polish/Hungarian/Czech/Turkish/Portu-
guese/Chinese and Japanese

CLIP-PROJECT PROFESSIONAL 5146053 1

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 27

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
28 PHOENIX CONTACT
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Printing systems - MARKING system

The right printer for every application.    

Product range overview  
We can provide a wide range of printing
systems for your terminal, conductor, cable,    
Printing systems 30
and device marking requirements. The
BLUEMARK CLED high-speed printer with       
innovative UV technology prints materials   BLUEMARK CLED 32 
in UniCard format quickly and easily.   THERMOMARK CARD PLUS 34 
The printers in the THERMOMARK   THERMOMARK CARD 35 
series are renowned for their proven main-
tenance-free printing method and maximum   THERMOMARK ROLL 38 
user-friendliness. They can be used to print   THERMOMARK ROLL X1 39 
markers in a variety of materials and print   MARKING BOX 40 
formats, as well as labels and shrink sleeves,
in outstanding quality.   THERMOMARK CARD SET and ROLL SET 41 
  THERMOMARK X1.2 42 
  THERMOMARK W2 43 
  CMS-P1-PLOTTER 44 
  CMS-P1-PLOTTER engraving unit 45 
   
Overview of marking material - printers 50
  Which printer prints which marking  

PHOENIX CONTACT 29
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Marking and labeling - MARKING system
Printing systems

Phoenix Contact is a competent partner Phoenix Contact provides a variety of A comprehensive range of materials for
for control cabinet and system engineering. printing systems: marking terminal blocks, conductors, ca-
In this context, we aim to supplement our – BLUEMARK CLED, high-speed printer bles, and devices is available for each of the
products with services, hardware, and soft- with UV technology for labeling UniCard printing systems provided. As a result, each
ware to make the planning and production formats printing system represents a self-contained
of systems as efficient as possible. – THERMOMARK CARD, thermal transfer solution capable of performing all marking
MARKING system from Phoenix Contact printer for labeling UniCard and UniSheet tasks in and around the control cabinet. To
represents an integrated labeling system formats ensure that you benefit from consistently
from planning right through to the finished – THERMOMARK ROLL, thermal transfer high levels of marking quality, all the materi-
printed label. In addition to the wide range printer for labeling material off the roll als offered are tailored to the devices con-
of marking materials, the marking range also and continuous media cerned and undergo extensive testing.
includes the CLIP PROJECT software as – THERMOMARK ROLL X1, thermal
well as various printers. transfer printer for large quantities
The data required for labeling is sent to the – THERMOMARK W2, thermal transfer
printers by the CLIP PROJECT planning printer for double-sided labeling and per-
software, which is supplied as standard. This foration of continuous shrink sleeves
controls the printers and facilitates the cre- – CMS-P1-PLOTTER and P1 ENGRAVING
ation of marking data by allowing data to be UNIT to extend plotters for engraving
imported directly from circuit diagrams.

30 PHOENIX CONTACT
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Marking and labeling - MARKING system
Printing systems

The BLUEMARK CLED uses the latest With the new THERMOMARK CARD PLUS The new THERMOMARK CARD ther-
UV technology for labeling. This makes the thermal transfer printer, you can use a seg- mal transfer printer can be used to print
markers instantly wipe-resistant and ready mented ink ribbon to create four-color marking materials supplied in card format. It
for immediate use. The fast printing tech- marking labels. You can create warning in- offers you a really easy way to produce ter-
nology enables 10,000 labels to be pro- structions, prohibition signs, mandatory minal, conductor, cable, and device mark-
cessed per hour. Thanks to the LED tech- signs, hazardous substances labels according ings of incredibly high quality. The low
nology, the printer does not require a to the Ordinance on Hazardous Substances, weight and compact design of the new
warm-up time, is environmentally friendly, and combi labels easily and with excellent printer mean that it can also be used as a
and is also very quiet. quality. The low weight and compact design portable solution wherever it is needed.
of this new printer mean that it can also be
used as a portable solution.

The THERMOMARK ROLL thermal The THERMOMARK W2 has been spe- Apart from label strips and UniCard ma-
transfer printer has been designed for print- cially developed for the double-sided print- terials, the CMS-P1-PLOTTER can also be
ing material off the roll and continuous me- ing and perforation of continuous WMS used to label sheet materials. Its integrated
dia. You can easily create high-quality print- shrink sleeves. Double-sided labeling en- pen station facilitates handling and helps
ed labels, markers, and shrink sleeves. The sures optimum legibility on conductors and prevent the pens from drying out.
compact printer is also suitable for mobile cables. The special construction of the The CMS-P1-PLOTTER can be converted
use. The THERMOMARK ROLL X1 is par- guide elements ensures easy handling when into an engraving unit quickly and easily by
ticularly suitable for labeling large quantities. inserting the sleeve. swapping the plotter head for the engraving
device.

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 31

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Marking and labeling - MARKING system
Printing systems
BLUEMARK CLED

UV
UV LED technology

Dimensions
[mm]
MARKING system Simple operation General data
The new BLUEMARK CLED makes label- – Order-specific printing, thanks to large Temperature range [°C]
Print method
ing standardized UniCard material for ter- exchangeable magazine for up to 40 mark- Volume
minal blocks, conductors, and device mark- er sheets Pressure capacity
ing as easy as printing on paper. – Printing can be rotated by 180° as re- Interfaces
The printer receives labeling data directly quired, thanks to automatic material de- Power supply [V]
from your CAE system via the CLIP PROJECT tection Weight [kg]
Operating systems
central planning and marking software. – The front feed enables individual sheets
to be labeled regardless of how the mag- Power consumption [W]

azine is assembled
Description Color

Printer with solvent-free LED UV technology, including CLIP

PROJECT advanced software, collection container for 20 sheets,
CD with multilingual user manual, English/German user manual,
driver and firmware, European and US power cable, USB cable

gray
Set, consisting of: 1 x BLUEMARK CLED, Order No. 5147999, 1 x
MARKING NOTEBOOK, CLIP-PROJECT PROFESSIONAL

With German operating system and German key- gray

board
With English operating system and English key- gray
board
Accommodating box, in conjunction with the BLUEMARK CLED-
MAG 40, for accommodating 90 UC or UCT sheets

Fluid cartridge, replacement, 20 ml printing fluid, black

Exchangeable magazine,
For accommodating 20 UC or UCT sheets
For accommodating 40 UC or UCT sheets
Compartment
For accommodating 20 UC or UCT sheets
Transport case, with aluminum edges, for printer and accessories
Easy operation CLED – compact UV LED printing
– Thanks to large color touch screen technology
Magazines for labeling aluminum markers
– Direct entry of data and commands Printing fluid is exposed to UV light which
– Clear symbols and plain text messages is the basis of our quick-dry printing con-
– Ready to print as soon as device is cept. This light is generated with high inten-
switched on sity using 24 LEDs on a surface of 1 cm2.
– Language selection via touchscreen menu – Excellent printing quality Notes:

– No drying time An application video can be found in the download area for the rel-
evant product on our website at www.phoenixcontact.net/products.
– High wipe and abrasion resistance
– Excellent resistance to chemicals
– Environmentally friendly, as solvent-free
system

32 PHOENIX CONTACT
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Marking and labeling - MARKING system
Printing systems

Printers Printing set for mats Accomodating box

Technical data Technical data Technical data

Width Length Height Width Length Height Width Length Height
480 500 330 480 500 330 400 470 160

5 ... 35 5 ... 35 -
UV LED technology UV LED technology -
20 ml 20 ml -
Approx. 10000 markers/h (UC-TMF 4 with 2 characters/marker) Approx. 10000 markers/h (UC-TMF 4 with 2 characters/marker) -

10/100 Mbps Ethernet / USB 2.0 10/100 Mbps Ethernet -

100 ... 240 / 50 Hz ... 60 Hz 100 ... 240 / 50 Hz ... 60 Hz -
16 16 -
MS Windows XP SP3, MS Windows Vista, MS Windows 7 (32/64-bit), MS Windows XP SP3, MS Windows Vista, MS Windows 7 (32/64-bit), -
MS Windows 8 (32/64-bit) MS Windows 8 (32/64-bit)
74 74 -

Ordering data Ordering data Ordering data

Pcs. / Pcs. / Pcs. /

Type Order No. Type Order No. Type Order No.
Pkt. Pkt. Pkt.

BLUEMARK CLED 5147999 1

BLUEMARK CLED SET 5147400 1

BLUEMARK CLED SET EN 5147401 1

BLUEMARK CLED-BASE 5146669 1

Accessories Accessories Accessories

BLUEMARK CLED-FLUID-CARTR. 5146662 1 BLUEMARK CLED-FLUID-CARTR. 5146662 1

BLUEMARK CLED-MAG 20 5146655 1 BLUEMARK CLED-MAG 20 5146655 1

BLUEMARK CLED-MAG 40 5146668 1 BLUEMARK CLED-MAG 40 5146668 1

BLUEMARK CLED-STACKER 20 5146656 1 BLUEMARK CLED-STACKER 20 5146656 1

BLUEMARK CLED CASE 5146725 1 BLUEMARK CLED CASE 5146725 1

See page 161 See page 161

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 33

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Marking and labeling - MARKING system
Printing systems
THERMOMARK CARD PLUS, for
sheet materials and cards, four-color
printing

1
2
1
2
Thermal transfer for sheets
and cards

Technical data
Dimensions Width Length Height
[mm] 253 320 189
The THERMOMARK CARD PLUS was General data
specially developed for printing with seg- Print resolution [dpi] 300 dpi
Max. print width [mm] 104
mented multi-ink ribbons. Power supply [V] 100 ... 240 / 50 Hz ... 60 Hz
– Prints markers in card format for termi- Weight [kg] 6
Operating systems MS Windows XP SP3, MS Windows Vista, MS Windows 7 (32/64-bit),
nal, conductor, cable, device, system, and MS Windows 8 (32/64-bit)
safety marking applications
Ordering data
– Prints several colors without replacing
the ink ribbon Description Color Type Order No.
Pcs. /
Pkt.
– For all UniCard (UCT) and UniSheet (US)
Thermal transfer printer for cards, incl. European power cable,
materials US power cable, USB cable,
– Maintenance-free operation with tried- DVD with CLIP PROJECT ADVANCED, CD with multilingual user
manual/driver/firmware,
and-tested thermal transfer printing tech- DIN A5 printed English/German user manual,
nology magazine for UCT-TM materials,
magazine for US materials,
– High-quality, fast printing: printing time one unit pack UCT-TM 6,
for one single-color UniCard: just 8 sec- one unit pack US-EMLP (85,6x54),
one ink ribbon (50-meter sample roll)
onds gray THERMOMARK CARD PLUS 5146481 1
– Easy operating concept based on straight- Accessories
forward touchscreen entry Transport case
– USB and Ethernet connections TL CASE 0800613 1
– Easy to control with the CLIP PROJECT Ink ribbon, length: 300 m, width: 110 mm
black THERMOMARK-RIBBON 110-TC 0801371 1
software Ink ribbon, length: 300 m, width: 110 mm white TM-RIBBON 110-TC/TR WH 1014402 1

Notes: Segmented ink ribbon, length: 60 m, width: 110 mm

An application video can be found in the download area for the rel- two segments in colors
evant product on our website at www.phoenixcontact.net/products. black/red TM-RIBBON 110-TC BK/RD 1014403 1
three segments in colors black/red/yel- TM-RIBBON 110-TC BK/RD/YE 1014404 1
low
four segments in colors black/red/blue/ TM-RIBBON 110-TC BK/RD/BU/YE 1014405 1
yellow

34 PHOENIX CONTACT
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Marking and labeling - MARKING system
Printing systems
THERMOMARK CARD, thermal
transfer printer for sheet materials
and cards

1
2
1
2
Thermal transfer for sheets
and cards

CCC   

Technical data
Dimensions Width Length Height
[mm] 253 320 189
– The THERMOMARK CARD can print General data
markers supplied as cards in the context Print resolution [dpi] 300 dpi
Max. print width [mm] 104
of terminal, conductor, cable, and device Power supply [V] 100 ... 240 / 50 Hz ... 60 Hz
marking applications Weight [kg] 6
Operating systems MS Windows XP SP3, MS Windows Vista, MS Windows 7 (32/64-bit),
– For all UniCard (UCT) and UniSheet (US) MS Windows 8 (32/64-bit)
materials
Ordering data
– Maintenance-free operation with tried-
and-tested thermal transfer printing tech- Description Color Type Order No.
Pcs. /
Pkt.
nology
Thermal transfer printer for cards, incl. European power cable,
– High-quality, fast labeling. Printing time US power cable, USB cable,
for one UniCard: just 8 seconds DVD with CLIP PROJECT ADVANCED, CD with multilingual user
manual/driver/firmware,
– Easy operating concept based on straight- DIN A5 printed English/German user manual,
forward touchscreen entry magazine for UCT-TM materials,
magazine for US materials,
– USB and Ethernet connections one unit pack UCT-TM 6,
– Easy to control with the CLIP PROJECT one unit pack US-EMLP (85,6x54),
one ink ribbon (50-meter sample roll)
software gray THERMOMARK CARD 5146464 1

Notes: Accessories
For corresponding magazines, see page 36. Transport case
TL CASE 0800613 1
An application video can be found in the download area for the rel-
evant product on our website at www.phoenixcontact.net/products. Ink ribbon, length: 300 m, width: 110 mm
black THERMOMARK-RIBBON 110-TC 0801371 1

Ink ribbon, length: 300 m, width: 110 mm white TM-RIBBON 110-TC/TR WH 1014402 1

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 35

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Marking and labeling - MARKING system
Printing systems
Magazines for THERMOMARK CARD
and THERMOMARK CARD PLUS

1
2
1
2
Thermal transfer for sheets
and cards

Ordering data

Pcs. /
Description   Type Order No.
– Robust magazines for UniCard labeling Pkt.

material Magazine, for THERMOMARK CARD ...

for accommodating: UCT-TM ..., UCT1-TM ..., THERMOMARK CARD-UCT-MAG1 5146480 1
– The format automatically ensures printing UCT5-TM ..., UCT-EM (5X10), UCT-EM (6X10)
with a high level of positional accuracy
Magazine, for THERMOMARK CARD ..., for accommodating:
– Even compatible with marking sheets that UCT-TMF ...
have already been started THERMOMARK CARD-UCT-MAG2 5146563 1
Magazine, for THERMOMARK CARD ..., for accommodating:
UCT-WMS 
THERMOMARK CARD-UCT-MAG3 5146613 1
Plastic magazine, for THERMOMARK CARD ..., for accommo-
dating: UCT1-TMF
THERMOMARK CARD-UCT-MAG4 5146614 1
Plastic magazine, for THERMOMARK CARD ..., for accommo-
dating: UCT2-TM 
THERMOMARK CARD-UCT-MAG5 5146615 1
Magazine, for THERMOMARK CARD ..., for accommodating:
UCT3-TM 
THERMOMARK CARD-UCT-MAG6 5146616 1
Magazine, for THERMOMARK CARD ..., for accommodating
UCT-WMT ... sheets, UCT-EM (17X10)
THERMOMARK CARD-UCT-MAG7 0801734 1
Magazine, for THERMOMARK CARD ...
for accommodating UCT-EM (17,5X8), UCT- THERMOMARK CARD-UCT-MAG8 0801735 1
EM (20X7), UCT-EM (15X10)
for accommodating UCT-EM (12X3.3), UCT- THERMOMARK CARD-UCT-MAG9 0801736 1
EM (12X6)
for accommodating UCT-EM (30X5) THERMOMARK CARD-UCT-MAG10 0801737 1
for accommodating UCT-EM (17X10) and (20X8) THERMOMARK CARD-UCT-MAG11 0801738 1

Magazine, for THERMOMARK CARD ...

for accommodating UCT-EM (10X8), UCT- THERMOMARK CARD-UCT-MAG12 0830399 1
EM (12X7)
for accommodating UCT-EM (10X5) THERMOMARK CARD-UCT-MAG13 0830400 1
for accommodating UCT-EM (21X8) and THERMOMARK CARD-UCT-MAG14 0830401 1
UCT EM (17X8)
Magazine, for THERMOMARK CARD ...
for accommodating UCT-EM (20 x 9) THERMOMARK CARD-UCT-MAG15 0830402 1
for accommodating UCT-EM (17 x 9) THERMOMARK CARD-UCT-MAG16 0830403 1
for accommodating UCT-EM (18 x 8) THERMOMARK CARD-UCT-MAG17 0830404 1
Magazine, for THERMOMARK CARD ...
for accommodating UCT-EM (17,5X7,5) THERMOMARK CARD-UCT-MAG18 0830405 1
for accommodating UCT-EM (10X7) THERMOMARK CARD-UCT-MAG20 0830751 1
for accommodating UCT-EM (17,5X9) THERMOMARK CARD-UCT-MAG22 0830771 1
Magazine, for THERMOMARK CARD ...
for accommodating UCT6M-TM ... THERMOMARK CARD-UCT-MAG23 0830808 1
for accommodating UCT6R-TM ... THERMOMARK CARD-UCT-MAG24 0830809 1

36 PHOENIX CONTACT
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Marking and labeling - MARKING system
Printing systems
Magazine for THERMOMARK CARD
and THERMOMARK CARD PLUS

1
2
1
2
Thermal transfer for sheets
and cards

Ordering data

Pcs. /
Description   Type Order No.
– Robust magazine for UniSheet labeling Pkt.

material Magazine, for THERMOMARK CARD..., for accommodating all

US-... materials
– The format automatically ensures printing THERMOMARK CARD-US-MAG1 5146451 1
with a high level of positional accuracy
– Even compatible with marking sheets that
have already been started

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 37

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Marking and labeling - MARKING system
Printing systems
THERMOMARK ROLL, thermal
transfer printer for material off the
roll

2
1
1
2
Thermal transfer for rolls

CCC   

Technical data
Dimensions Width Length Height
[mm] 253 320 189
– The THERMOMARK ROLL can print General data
markers supplied on rolls in the context Print resolution [dpi] 300 dpi
Max. print width [mm] 104
of terminal, conductor, cable, and device Max. printing length [mm] 1000
marking applications Power supply [V] 100 ... 240 / 50 Hz ... 60 Hz
Weight [kg] 4
– For all labels and shrink sleeves Operating systems MS Windows XP SP3, MS Windows Vista, MS Windows 7 (32/64-bit),
– Maintenance-free operation with tried- MS Windows 8 (32/64-bit)
and-tested thermal transfer printing tech- Ordering data
nology
Pcs. /
– High-quality, fast labeling Description Color Type Order No.
Pkt.
– Easy operating concept based on straight- Thermal transfer printer for material off the roll, including Euro-
forward touchscreen entry pean power cable, US power cable, USB cable,
DVD with CLIP PROJECT ADVANCED, CD with multilingual user
– USB and Ethernet connections manual/driver/firmware,
– Easy to control with the CLIP PROJECT A5 printed English/German user manual,
one roll of EML (20x8) labels containing 1000 labels,
software one ink ribbon (50 meters)
gray THERMOMARK ROLL 5146477 1
Notes:
An application video can be found in the download area for the rel-
Accessories
evant product on our website at www.phoenixcontact.net/products. Cutter, can be retrofitted, for precise cutting of continuous media
into required lengths
THERMOMARK ROLL-CUTTER 5146422 1
Cutter, can be retrofitted, for perforating continuous media

THERMOMARK ROLL-CUTTER/P 5146435 1

Transport case
TL CASE 0800613 1
External media hub, for roll diameters of 150 mm to 305 mm

THERMOMARK ROLL-ERH 5146448 1

External media hub, for roll diameters of up to 500 mm

THERMOMARK-ERH 500 5146309 1

Ink ribbon, length: 300 m, width: 110 mm
black THERMOMARK-RIBBON 110 5145384 1
blue THERMOMARK-RIBBON 110 BU 0829544 1
green THERMOMARK-RIBBON 110 GN 0829542 1
red THERMOMARK-RIBBON 110 RD 0829543 1
Ink ribbon, specifically for high-temperature labels, EML-HT...

black THERMOMARK-RIBBON 110-EML-HT 0800342 1

Ink ribbon, specifically for WMS... shrink sleeves, length: 300 m,
width: 110 mm
black THERMOMARK-RIBBON 110-WMSU 0801358 1
white THERMOMARK-RIBBON 110-WMSU 0801359 1
WH
Ink ribbon, specifically for WMS... shrink sleeves, length: 300 m,
width: 64 mm
black THERMOMARK-RIBBON 64-WMSU 0801360 1
white THERMOMARK-RIBBON 64-WMSU 0801361 1
WH

38 PHOENIX CONTACT
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Marking and labeling - MARKING system
Printing systems
THERMOMARK ROLL X1, thermal
transfer printer for material off the
roll

2
1
1
2
Thermal transfer for rolls

Technical data
Dimensions Width Length Height
[mm] 264 412 245
The THERMOMARK ROLL X1 printer is General data
suitable for labeling large quantities and of- Temperature range [°C] 5 ... 40
Print resolution [dpi] 300 dpi
fers the following features: Max. print width [mm] 104
– Also accommodates large rolls; inside the Max. printing length [mm] 1000
Interfaces 10/100 Mbps Ethernet / USB 2.0
printer housing, the label rolls are pro- Power supply [V] 100 ... 240 / 50 Hz ... 60 Hz
tected against environmental influences Weight [kg] 5
such as dust and dirt Operating systems MS Windows XP SP3, MS Windows Vista, MS Windows 7 (32/64-bit),
MS Windows 8 (32/64-bit)
– For all labels and shrink sleeves
– Maintenance-free operation with tried- Ordering data
and-tested thermal transfer printing tech- Description Color Type Order No.
Pcs. /
nology Pkt.

– High-quality, fast labeling Thermal transfer printer for material off the roll, including Euro-
pean power cable, US power cable, USB cable,
– Easy operating concept based on straight- DVD with CLIP PROJECT ADVANCED, CD with multilingual user
forward touchscreen entry manual/driver/firmware,
A5 printed English/German user manual,
– USB and Ethernet connections one roll of EML (20x8) labels containing 1000 labels,
one ink ribbon (50 meters)
– Easy to control with the CLIP PROJECT gray THERMOMARK ROLL X1 5146723 1
software
Accessories
– Printing and dispensing labels on request
Cutter, can be retrofitted, for precise cutting of continuous media
or automatically after removing the label into required lengths
with the THERMOMARK ROLL X1 THERMOMARK ROLL X1 CUTTER 5146765 1
-DISPENSER Perforation device, can be retrofitted, for perforating and cutting
continuous media

THERMOMARK ROLL X1 CUTTER/P 5146766 1

Cutting to length or perforating is Label dispenser, dispensing device for labels with a height of
10 mm or more
easy THERMOMARK ROLL X1 -DISPENSER 1014401 1
– Continuous media can be cut or perforat- Ink ribbon, length: 300 m, width: 110 mm
ed with a high degree of positioning accu- black THERMOMARK-RIBBON 110 5145384 1
blue THERMOMARK-RIBBON 110 BU 0829544 1
racy (see figure below) green THERMOMARK-RIBBON 110 GN 0829542 1
red THERMOMARK-RIBBON 110 RD 0829543 1
Ink ribbon, specifically for high-temperature labels, EML-HT...

black THERMOMARK-RIBBON 110-EML-HT 0800342 1

Ink ribbon, specifically for WMS... shrink sleeves, length: 300 m,
width: 110 mm
black THERMOMARK-RIBBON 110-WMSU 0801358 1
white THERMOMARK-RIBBON 110-WMSU 0801359 1
WH
Ink ribbon, specifically for WMS... shrink sleeves, length: 300 m,
width: 64 mm
black THERMOMARK-RIBBON 64-WMSU 0801360 1
white THERMOMARK-RIBBON 64-WMSU 0801361 1
WH
Ink ribbon, specifically for cable markers for assembly with cable
binders, WMTB HF..., length: 300 m, width: 110 mm

black THERMOMARK-RIBBON 110-WMTB 5148007 1

HF
Transport case
silver THERMOMARK ROLL X1-CASE 5146724 1

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 39

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Marking and labeling - MARKING system
Printing systems
THERMOMARK printer sets

2
1
1
2

1
2
1
2
Thermal transfer for sheets Thermal transfer for rolls
and cards

Printing set, complete

Ordering data

Pcs. /
Description   Type Order No.
MARKING BOX is the complete labeling Pkt.

system for all terminal, conductor, cable, Set, consisting of: 1 x THERMOMARK CARD, Order No. 5146464,
1 x THERMOMARK ROLL, Order No. 5146477, 1 x MARK-
and device marking applications. It is avail- ING NOTEBOOK, CLIP-PROJECT PROFESSIONAL
able for different country-specific keyboard
German operating system and keyboard MARKING BOX 5147100 1
and operating systems.
– Includes the THERMOMARK CARD English operating system and US international MARKING BOX EN 5147101 1
keyboard
printer for all materials in the UniCard Printing set, consisting of: 1 x THERMOMARK CARD, Order No.
(UCT) and UniSheet (US) formats 5146464, 1 x MARKING NOTEBOOK, CLIP-PROJECT PROFES-
SIONAL
– Includes the THERMOMARK ROLL German operating system and keyboard
printer for all labels and shrink sleeves
English operating system and US international
supplied in rolls keyboard
– Includes a powerful notebook with pre- Printing set, consisting of: 1 x THERMOMARK ROLL, Order No.
5146477, 1 x MARKING NOTEBOOK, CLIP-PROJECT PROFES-
installed CLIP PROJECT configuration SIONAL
and marking software, as well as the print- German operating system and keyboard
er drivers required to enable quick start- English operating system and US international
up without any need for installation and keyboard
setup work. Plug and print. Simply con- Versions
German operating system and Swiss keyboard MARKING BOX DE CH 0801749 1
nect the devices via USB and you're ready
to print
English operating system and Belgian keyboard MARKING BOX EN BE 0801742 1
– The compact and robust THERMOMARK
printers are optimally suited to mobile
French operating system and keyboard MARKING BOX FR FR 0801590 1
use on site.
Notes:
Spanish operating system and keyboard MARKING BOX ES ES 0801747 1
An application video can be found in the download area for the rel-
evant product on our website at www.phoenixcontact.net/products.
Italian operating system and keyboard MARKING BOX IT IT 0801745 1

Polish operating system and US international key- MARKING BOX PL US 0801744 1

board

Hungarian operating system and keyboard MARKING BOX HU HU 0801750 1

Portuguese operating system and keyboard MARKING BOX PT PT 0801748 1

Russian operating system and keyboard MARKING BOX RU RU 0801739 1

Danish operating system and keyboard MARKING BOX DK DK 0801741 1

Swedish operating system and keyboard MARKING BOX SE SE 0801740 1

Accessories
Printer accessories www.phoenixcontact.net/products

40 PHOENIX CONTACT
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Marking and labeling - MARKING system
Printing systems

Printing set for cards Printing set for material provided on rolls

 

Ordering data Ordering data

Pcs. / Pcs. /
Type Order No. Type Order No.
Pkt. Pkt.

THERMOMARK CARD SET 5147200 1

THERMOMARK CARD SET EN 5147201 1

THERMOMARK ROLL SET 5147300 1

THERMOMARK ROLL SET EN 5147301 1

THERMOMARK CARD SET DE CH 5147220 1 THERMOMARK ROLL SET DE CH 5147230 1

THERMOMARK CARD SET EN BE 5147214 1 THERMOMARK ROLL SET EN BE 5147225 1

THERMOMARK CARD SET FR FR 0801591 1 THERMOMARK ROLL SET FR FR 0801592 1

THERMOMARK CARD SET ES ES 5147218 1 THERMOMARK ROLL SET ES ES 5147228 1

THERMOMARK CARD SET IT IT 5147217 1 THERMOMARK ROLL SET IT IT 5147227 1

THERMOMARK CARD SET PL US 5147215 1 THERMOMARK ROLL SET PL US 5147226 1

THERMOMARK CARD SET HU HU 5147221 1 THERMOMARK ROLL SET HU HU 5147231 1

THERMOMARK CARD SET PT PT 5147219 1 THERMOMARK ROLL SET PT PT 5147229 1

THERMOMARK CARD SET RU RU 5147211 1 THERMOMARK ROLL SET RU RU 5147222 1

THERMOMARK CARD SET DK DK 5147213 1 THERMOMARK ROLL SET DK DK 5147224 1

THERMOMARK CARD SET SE SE 5147212 1 THERMOMARK ROLL SET SE SE 5147223 1

Accessories Accessories

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 41

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Marking and labeling - MARKING system
Printing systems
THERMOMARK X1.2, thermal trans-
fer printer for material off the roll

2
1
1
2
Thermal transfer for rolls

Technical data
Dimensions Width Length Height
[mm] 242 446 274
An important addition to the range is the General data
THERMOMARK X1.2, a top-of-the-line Print resolution [dpi] 300 dpi
Max. print width [mm] 105
thermal transfer printer with the following Max. printing length [mm] 2000
key features: Interfaces Serial (V.24 (RS-232)) / USB 2.0 / 10/100 Mbps Ethernet
– High print speed Power supply [V] 100 ... 240 / 50 Hz ... 60 Hz
– Print resolution of 300 dpi Weight [kg] 10
– This printer is suitable for labeling large Operating systems MS Windows XP SP3, MS Windows Vista, MS Windows 7 (32/64-bit),
MS Windows 8 (32/64-bit)
quantities and is capable of processing all
Ordering data
types of material supplied on rolls
– The easy-to-use centering function for Description Color Type Order No.
Pcs. /
Pkt.
the printing material makes it possible to
label continuous media such as shrink Thermal transfer printer, incl. connecting cable, Windows®
printer driver and operating instructions, software
sleeves
– High-quality resin-based ink ribbons en- gray THERMOMARK X1.2 5146231 1

sure a form of labeling that is resistant to Accessories

mechanical and chemical effects Starter set, complete for THERMOMARK X1.2
consisting of:
– Continuous media can be cut and perfo- - Planning and marking software
rated with a high degree of positional ac- - THERMOMARK X1.2 thermal transfer printer
- Ink ribbon
curacy - Label rolls
THERMOMARK X1.2-KIT 5146341 1
Cutter, for THERMOMARK X1...
THERMOMARK X1-CUTTER 5145290 1
Perforator
THERMOMARK X1-CUTTER/P 5146244 1
Transport case, with aluminum edges, for printer and accessories

THERMOMARK X1-CASE 5145300 1

External media hub, for roll diameters of 150 mm to 305 mm

THERMOMARK ROLL-ERH 5146448 1

External media hub, for roll diameters of up to 500 mm

THERMOMARK-ERH 500 5146309 1

Ink ribbon, length: 300 m, width: 110 mm
black THERMOMARK-RIBBON 110 5145384 1
Ink ribbon, specifically for high-temperature labels, EML-HT...

black THERMOMARK-RIBBON 110-EML-HT 0800342 1

Ink ribbon, specifically for WMS... shrink sleeves, length: 300 m,
width: 110 mm
black THERMOMARK-RIBBON 110-WMSU 0801358 1
white THERMOMARK-RIBBON 110-WMSU 0801359 1
WH
Ink ribbon, specifically for WMS... shrink sleeves, length: 300 m,
width: 64 mm
black THERMOMARK-RIBBON 64-WMSU 0801360 1
white THERMOMARK-RIBBON 64-WMSU 0801361 1
WH

42 PHOENIX CONTACT
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Marking and labeling - MARKING system
Printing systems
THERMOMARK W2, thermal
transfer printer for continuous shrink
sleeve

2
1
1
2
Thermal transfer for rolls

Technical data
Dimensions Width Length Height
[mm] 248 554 405
The THERMOMARK W2 has been spe- General data
cially developed for the double-sided print- Print resolution [dpi] 300 dpi
Max. print width [mm] 105.6
ing and perforation of continuous WMS Max. printing length [mm] 1000
shrink sleeves Interfaces Serial (V.24 (RS-232)) / USB 2.0 / 10/100 Mbps Ethernet
– Double-sided printing ensures optimum Power supply [V] 100 ... 240 / 50 Hz ... 60 Hz
marking legibility Weight [kg] 21
– The guide elements ensure easy handling Operating systems MS Windows XP SP3, MS Windows Vista, MS Windows 7 (32/64-bit),
MS Windows 8 (32/64-bit)
when inserting the sleeve
Ordering data
– The user-friendly interface of the
CLIP PROJECT software enables you to Description Color Type Order No.
Pcs. /
Pkt.
enter custom specifications for the label-
ing and marker length Thermal transfer printer, specially for shrink sleeve labeling on
both sides, including perforation knife, connecting cable, Win-
– Black and white ink ribbons are available dows® printer driver, operating instructions, CLIP PROJECT
advanced planning and marking software
to facilitate color marking
– The printed markers can be easily and gray THERMOMARK W2 5146147 1
quickly separated along the perforations Accessories
External media hub, for roll diameters of 150 mm to 305 mm

THERMOMARK ROLL-ERH 5146448 1

External media hub, for roll diameters of up to 500 mm

THERMOMARK-ERH 500 5146309 1

External media hub, for roll diameters of up to 500 mm

THERMOMARK-ERH 500 5146309 1

Ink ribbon, specifically for WMS... shrink sleeves, length: 300 m,
width: 110 mm
black THERMOMARK-RIBBON 110-WMSU 0801358 1
white THERMOMARK-RIBBON 110-WMSU 0801359 1
WH
Ink ribbon, specifically for WMS... shrink sleeves, length: 300 m,
width: 64 mm
black THERMOMARK-RIBBON 64-WMSU 0801360 1
white THERMOMARK-RIBBON 64-WMSU 0801361 1
WH

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 43

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Marking and labeling - MARKING system
Printing systems
CMS-P1-PLOTTER

y
123
x
Plotter

Technical data
Dimensions Width Length Height
[mm] 440 660 125
– During long periods of non-use, the plot- General data
ter pens are stored safely in a pen station Lettering field size [mm] 440 x 296 mm
Max. material height [mm] 10.5
– The pens are removed and deposited au- Max. plotting speed [m/s] 0.4
tomatically Interfaces Parallel (Centronics) / USB 2.0
Input voltage / frequency [V] 100 ... 240 / 50 Hz ... 60 Hz
– The pen station of the CMS-P1-PLOTTER Weight [kg] 8
prevents the plotter pens from drying out Operating systems MS Windows XP SP3, MS Windows Vista, MS Windows 7 (32/64-bit),
– An automatic marking preparation func- MS Windows 8 (32/64-bit)

tion ensures optimum marking results Ordering data

right from the first character Pcs. /
– The plotter is controlled with the Description Color Type Order No.
Pkt.
CLIP PROJECT software Marking plotter, incl. power supply unit, connecting cable (Cen-
– The plotter can be connected to the tronics and USB), pen CMS-PEN 0,25, manual, planning and mark-
ing software
computer quickly and easily via the
Centronics or USB interface silver CMS-P1-PLOTTER 5144615 1

– Easily operated with just a few buttons Accessories

Starter set, consisting of:
- CLIP PROJECT, - CMS-P1-PLOTTER,
- Magazines for UC-TM , UC-TMF, and UC-EMP, plus marking
material
- Ink and cleaning set
CMS-P1-PLOTTER-KIT 5144628 1
Transport case for CMS-P1-PLOTTER, rounded profile case with
aluminum frame for a complete plotter system

CMS-P1-PLOTTER-CASE 5144631 1
Covering hood for CMS-P1-PLOTTER, flexible hood for protect-
ing against contamination
CMS-P1-PLOTTER-COVER 5144806 1
Set of seals for the pen station, 4 replacement seals for the pen
station of the CMS-P1-PLOTTER and 10 marking preparation
plates, incl. assembly tool
CMS-P1-PENDEPOT 5144835 1
Pen plates, for the pen station of the CMS-P1-PLOTTER

CMS-P1-PREPLATES 5145135 1
Magazines and pens See page 46

44 PHOENIX CONTACT
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Marking and labeling - MARKING system
Printing systems
CMS-P1-PLOTTER engraving unit

Engraving

Technical data
Dimensions Width Length Height
[mm] 250 350
– The P1 ENGRAVING UNIT is the ideal General data
marking solution for device and compo- Power supply [V] 110 ... 240 / 50 Hz ... 60 Hz
Weight [kg] 8
nent marking applications that involve Speed range [RPM] 5000 ... 50000
high levels of mechanical and chemical Collet chuck [mm] 3
Power consumption [W] 150
stress
– The CMS-P1-PLOTTER can be convert- Ordering data
ed into an engraving unit quickly and easily Pcs. /
Description   Type Order No.
by swapping the plotter head for the en- Pkt.
graving device Engraving unit, for the CMS-P1-PLOTTER, incl. operating instruc-
tions (English/German), data CD and engraving chisel
– To allow different line thicknesses, en-
graving chisels with diameters ranging P1 ENGRAVING UNIT 5145546 1
from 0.2 ... 1.0 mm are available as acces- Accessories
sories Engraving chisel, with a point angle of 15°
– These are supplemented by a comprehen-
Point diameter 0.2 mm P1 GRAVER 0.2 5145478 1
sive product range of pre-assembled en- Point diameter 0.3 mm P1 GRAVER 0.3 5145481 1
graving materials see page 294 Point diameter 0.4 mm P1 GRAVER 0.4 5145494 1
– These materials remain in position and do Point diameter 0.5 mm P1 GRAVER 0.5 5145504 1
Point diameter 0.7 mm P1 GRAVER 0.7 5145517 1
not slip when used with the Point diameter 1.0 mm P1 GRAVER 1.0 5145520 1
CMS-P1-M/GPE ENGRAVING plotter Engraving chisel set, chisel with a point angle of 15°, point diam-
eter: 0.2 mm, 0.3 mm, 0.4 mm, 0.5 mm, 0.7 mm, 1.0 mm
magazine
P1 GRAVER SET 5145533 1
Vacuum cleaner bag, 5 spare bags for replacement

P1 ENGRAVING VC BAG 5145559 1

Magazine for the CMS-P1-PLOTTER, for accommodating
EMLP... and GPE... materials for engraving

- 1 GPE label sheet CMS-P1-M/GPE ENGRAVING 5145711 1

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 45

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Marking and labeling - MARKING system
Printing systems
Magazines for CMS-P1-PLOTTER

Ordering data

Pcs. /
Description Color Type Order No.
– Robust plastic magazines for labeling all Pkt.

commercially available marking materials Magazine, for CMS-P1-PLOTTER, for accommodating: UC-TM
..., UC-TMN ..., UC3-TM ..., UC-WMC 1,9..., UC-WMC 3,1..., UC-
– Even compatible with marking sheets that WMTBA ..., UC-EM (17,5x9), UC-EM (18x8), UC-EM (21x8)
have already been started
gray P1 UC-MAG 1 5146079 1
– Option of partial labeling For accommodating UC-WMC 4,4... gray P1 UC-MAG 2 5146082 1
– In terms of its size, the magazine utilizes For accommodating UC-WMC 5,6..., gray P1 UC-MAG 3 5146095 1
UC-WMC 7,5...
plotter capacity to the full For accommodating UC-TMF..., UC1-TMF..., gray P1 UC-MAG 4 5146105 1
– We offer a wide variety of different mag- UC2F-TM..., UC-WMT...
azines for marking materials. If you cannot For accommodating UC1-TM..., UC1U-TM...,
UC2-TM...
gray P1 UC-MAG 5 5146118 1

find the right magazine for your materials, For accommodating: UC-EM..., UC-EMP..., gray P1 UC-MAG 6 5146121 1
please get in touch UC-EMLP..., UC-EMSP..., and UC-WMTB...

For accommodating: UC-WMCO ... gray P1 UC-MAG 7 5146568 1

Plastic magazines, for CMS-P1-PLOTTER, for accommodating:
- 22 zack marker strips

CMS-P1-M/ZB 5144699 1
- 26 flat zack marker strips or ZBN strips CMS-P1-M/ZBF 5144709 1

- 2 zack marker sheets CMS-P1-M/ZBM 5144660 1

- 3 flat zack marker sheets CMS-P1-M/ZBFM 5144686 1
- 22 contactor marker zack marker strips CMS-P1-M/SS-ZB 5144712 1
- 4 to 6 PABA marker bars CMS-P1-M/PAB 5144741 1
- 30 marker pins ZB strips CMS-P1-M/BN-ZB 5144725 1
- 1 GPE label sheet CMS-P1-M/GPE 5144754 1
- 20 strips LBHZ conductor marking CMS-P1-M/LBHZ 5144738 1

- 1 GPE label sheet CMS-P1-M/GPE ENGRAVING 5145711 1

Magazine for accommodating sheet material, self-adhesive
mat for fixing labels, foils and paper, size of sheet max. DIN A4

CMS-P1-PAD 5144819 1

Accessories
Adapter plate for WMU magazines, for using the universal
CMS-WMU replaceable frame with the magazine inserts of the
CMS-MCP 3 plotter
CMS-P1-WMU-ADAPTER 5144822 1
Replacement fixation pad for CMS-P1-M/ZBFM, 9 self-adhesive
fixation pads, sufficient for 3 magazines
CMS-P1-M/ZBFM-PAD 5144848 1
Replacement fixation pad for CMS-P1-M/GPE and CMS-P1-
M/GPE ENGRAVING, one fixation pad, sufficient for one magazine

CMS-P1-M/GPE-PAD 5144880 1
Replacement fixation pad for CMS-P1-PAD, 1 fixation pad in
DIN A4 format
CMS-P1-PAD/SPARE 5144893 1

46 PHOENIX CONTACT
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Marking and labeling - MARKING system
Printing systems
Plotter pens

Ordering data

Pcs. /
Description Color Type Order No.
– Plotter pens for high-quality product la- Pkt.

beling Disposable plotter pen, non-refillable plotter pen, with pen

station, completely filled with 1 ml CMS-INK-TR-C 5 ink, for high
– Wipe-resistant with a perfect appearance requirements
– Totally integrated product range consist-
Line thickness 0.25 mm black CMS-DISPOSABLE-PEN 0,25 TR 5146685 1
ing of plotter pens, ink, and cleaning fluid Line thickness 0.35 mm black CMS-DISPOSABLE-PEN 0,35 TR 5146686 1
for the CMS-P1-PLOTTER plotter Pens, incl. adapters, ink tank and pen station, for different line
thicknesses, without ink
– Both reusable and disposable plotter pens
are available Line thickness 0.25 mm CMS-PEN 0,25 5067815 1
Line thickness 0.35 mm CMS-PEN 0,35 5067828 1
Line thickness 0.50 mm CMS-PEN 0,50 5067831 1

Accessories
Cleaning set for pens, consisting of: 1 cleaning cup, 2 cartridges
of 10 ml cleaning liquid each and 2 spare sealing caps for the pen
station

CMS-R-SET-TR 5146751 1
Cleaning cartridges with spare sealing caps, 2 cartridges, each
with 10 ml cleaning liquid and 2 caps

transparent CMS-R-FLUID-TR-C2 5146752 1

Ink cartridge, for CMS-PEN...
black CMS-INK-TR-C5 5146684 1

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 47

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Marking and labeling - MARKING system
Printing systems
Marker pen for plotter and
manual labeling

Ordering data

Pcs. /
Description Color Type Order No.
– High-quality labeling of unprinted marking Pkt.

materials, can be performed manually or Disposable pen, non-refillable, for manual labeling, can be also
used for plotter marking when combined with the
with the CMS-P1-PLOTTER P-PEN ADAPTER
– Used in conjunction with the
black P-PEN 0815211 10
P-PEN ADAPTER when combined
with plotter Accessories
– Disposable pen Aluminum adapter, to fix the P-PEN for plotter marking

– No handling of cleaning fluid required P-PEN ADAPTER 0815224 1

48 PHOENIX CONTACT
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Marking and labeling - MARKING system
Printing systems
Marker pen for manual labeling

Ordering data

Pcs. /
Description Color Type Order No.
Pkt.
Marker pen, refillable, for manual labeling, 0.35 mm line thick-
ness, can be refilled with CMS-INK-TR-C 5, delivered without ink

– High-quality labeling of unprinted marking black X-PEN 0,35 0811228 1

materials is also possible without the use Accessories

of labeling devices Ink cartridge, for CMS-PEN...
– We provide three versions for manual black CMS-INK-TR-C5 5146684 1

marking
– Refillable pen: X-PEN
– Disposable pen: B-STIFT
– Disposable pen: P-PEN, can also be used
for plotter marking when combined with
an adapter

Marker pen for manual labeling

– High-quality labeling of unprinted marking

materials is also possible without the use
of labeling devices
– We provide three versions for manual
marking
– Refillable pen: X-PEN
– Disposable pen: B-STIFT
– Disposable pen: P-PEN, can also be used
for plotter marking when combined with
an adapter

Ordering data

Pcs. /
Description Color Type Order No.
Pkt.
Marker pen, not refillable, for manual labeling, line thickness 0.5
mm
black B-STIFT 1051993 10

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 49

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Marking and labeling - MARKING system
Printing systems

Overview of
marking material -

2
1
1
2

1
2
printers

1
2
1
2

1
UV

2
Marking system BLUEMARK CLED THERMOMARK CARD PLUS THERMOMARK CARD THERMOMARK ROLL

Terminal marking
UC-TM... Page 58
UC-TMF... Page 62
UC-TMN... Page 66
UCT-TM... Page 82 Page 82 Page 82
UCT-TMF... Page 86 Page 86 Page 86
UC1-TM... Page 118
UCT1... Page 128 Page 128 Page 128
UCT-EM... Page 108 Page 108 Page 108
US-TM... Page 90 Page 90
US-TMF... Page 91 Page 91
US-TML... Page 92 Page 92
ZB...
ZBF...
TMT... Page 94
TML... Page 98
SK... Page 105

Conductor/cable marking
WMTB-AL... Page 161
UC-WMC(O)... Page 162
AI-WM... Page 175
UC-WMT... Page 176
UC-WMTB(A)... Page 179
UCT-WMT... Page 182 Page 182 Page 182
UCT-WMS... Page 186 Page 186 Page 186
US-WMT... Page 187 Page 187
US-WMTB... Page 190 Page 190
US-WML... Page 192 Page 192
WML...R Page 194
WMS... (pre-assembled) Page 200
WMS... Page 204
(continuous shrink sleeve)
EMT... Page 208
WMTW... Page 209
WMT.../WMTB... Page 210

50 PHOENIX CONTACT
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Marking and labeling - MARKING system
Printing systems

2
1

1
2
1

123

1
2

2
x
1
2

THERMOMARK ROLL X1 THERMOMARK X1.2 THERMOMARK W2 CMS-P1-PLOTTER P1 ENGRAVING UNIT

Page 58
Page 62
Page 66

Page 118

Page 68
Page 76
Page 94 Page 94
Page 98 Page 98
Page 105 Page 105

Page 162

Page 176
Page 179

Page 194 Page 194

Page 200 Page 200

Page 204 Page 204 Page 204

Page 208 Page 208

Page 209 Page 209
Page 210 Page 210

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 51

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Marking and labeling - MARKING system
Printing systems

Overview of
marking material -

2
1
1
2

1
2
printers

1
2
1
2

1
UV

2
Marking system BLUEMARK CLED THERMOMARK CARD PLUS THERMOMARK CARD THERMOMARK ROLL

Device marking
EMLP-AL... Page 231
EMSP-AL... Page 232
EMP-AL... Page 233
UC-EMLP... Page 234
UC-EMSP... Page 236
UC-EMP... Page 237
UC-EM... Page 240
UCT-EM... Page 246 Page 246 Page 246
US-EMLP... Page 258 Page 258
US-EMP... Page 262 Page 262
US-EMSP... Page 266 Page 266
US-EMLSP... Page 267 Page 267
US-EML... Page 268 Page 268
US-EMLF... Page 354 Page 354
EML... Page 270
EMLP... Page 274
EMLF... Page 278
EMLC... Page 279
EML-HA... Page 280
EML-HT... Page 282
EML-ESD... Page 284
EML-RM... Page 286
EMLS... Page 288
EMT... Page 290
GPE...
BMK...
BMKL...

System marking
US-PML-W... Page 320 Page 320
PML-W.... Page 321
US-PML-P... Page 326 Page 326
PML-P... Page 327
US-PML-M... Page 334 Page 334
PML-M... Page 335
PML-T... Page 342
US-PML-GHS... Page 348 Page 348
PML-GHS... Page 349
US-EMLF... Page 354 Page 354
PMM... Page 356

52 PHOENIX CONTACT
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Marking and labeling - MARKING system
Printing systems

2
1

1
2
1

123

1
2

2
x
1
2

THERMOMARK ROLL X1 THERMOMARK X1.2 THERMOMARK W2 CMS-P1-PLOTTER P1 ENGRAVING UNIT

Page 234
Page 236
Page 237
Page 240

Page 270 Page 270

Page 274 Page 274 Page 274
Page 278 Page 278
Page 279 Page 279
Page 280 Page 280
Page 282 Page 282
Page 284 Page 284
Page 286 Page 286
Page 288 Page 288
Page 290 Page 290
Page 294 Page 294
Page 293
Page 292

Page 321 Page 321

Page 327 Page 327

Page 335 Page 335

Page 342 Page 342

Page 349 Page 349

Page 356 Page 356

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 53

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
54 PHOENIX CONTACT
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Terminal marking - MARKING system

Large-surface and clear marking of    

Product range overview  
terminal strips is essential for quick and er-
ror-free wiring of terminal strips. This is also    
Terminal marking 56
true for the maintenance and startup of
control cabinets and systems.    
Terminal markers from Phoenix Contact UniCard UC-TM... terminal marking  
are optimally adapted to the terminals and
are available marked or unmarked in card,   For a tall marker groove 58 
roll or sheet format.   For a flat marker groove 62 
   
ZB... zack marker strip terminal marking  

  For a tall marker groove 68 

  For a flat marker groove 76 
   
UniCard UCT-TM... terminal marking  

  For a tall marker groove 82 

  For a flat marker groove 86 
   
UniSheet US-TM... terminal marking  

  For a universal marker groove 90 

  For a flat marker groove 91 
   
TMT terminal marking supplied in rolls  

  Marker strips for tall and flat marker grooves 94 

   
TML terminal marking supplied in rolls  

  Self-adhesive markers for terminal blocks without marker 98 

groove
   
SK terminal marking supplied as card material  

  Self-adhesive markers for terminal blocks without marker 100 

groove
   
Group marker labels and warning labels 108

   
Overview of terminal marking for Phoenix Contact 112

  The right marking solution for every terminal   

   
Terminal marking for terminal blocks from other 118
manufacturers
   
Overview of terminal marking for other manufacturers 140

  Phoenix Contact offers the right marking solution for every   

terminal
   
Ordering example for labeling service - printed for you 359

PHOENIX CONTACT 55
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Marking and labeling - MARKING system
Terminal marking

Those involved in control cabinet and sys- The terminal markers are available in All marking systems are characterized by
tem engineering are required to ensure strips or sheets and with or without labeling their high resolution and excellent wipe re-
meaningful labeling of electrical connecting in accordance with customer requirements. sistance.
elements and control cabinet components. Depending on the version, unlabeled termi-
As with comprehensive documentation, nal markers can be labeled using the various Various marking labels are available for la-
precise labeling of all terminal points makes printing systems available from Phoenix beling terminal block groups in addition to
it easier to set up and maintain the systems Contact. the labeling of the actual terminal points.
concerned. EN 60204-1/VDE 0113 Part 1 – Markers in UniCard format can be quickly These are snapped into the marking grooves
stipulates requirements concerning consis- and reliably labeled using the new BLUE- of terminal blocks. Details of group marking
tent system labeling and, therefore, for en- MARK CLED printer products that can be fixed to end brackets
suring that it matches the technical docu- – Markers in UniSheet format can be quick- can be found in the chapter titled Mounting
mentation. ly and reliably labeled using the new material starting on page 483.
Various marking materials are available for THERMOMARK CARD printer
labeling Phoenix Contact terminal blocks. – Material off the roll has been specially de-
The labeling strips can be easily separated by veloped for labeling using thermal transfer
hand, and their special geometry ensures printers, e.g., from the new THERMO-
that the labeling remains in place even in the MARK LINE series from Phoenix Con-
event of impact and vibration in machines tact
and vehicles. – Zack marker strips are ideal for labeling
with the plotter, but can also be labeled
directly by hand.
56 PHOENIX CONTACT
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Marking and labeling - MARKING system
Terminal marking

Markers are available in the UniCard and Markers are available in the UniCard and Miniature terminal blocks/transformer
UniSheet formats for the labeling of termi- UniSheet formats for terminal blocks, mod- terminal blocks have neither a tall nor a flat
nal blocks with a tall marker groove. They ules, and connectors with a flat marker marker groove. Special markers are available
can be supplied unprinted or printed in ac- groove. They can be supplied unprinted or in UniCard format for the purpose of label-
cordance with customer requirements. printed in accordance with customer re- ing such terminal blocks.
quirements.

The universal marker groove can be la- 10-section zack marker strips are available Unlabeled zack marker strips can accom-
beled with markers in UniSheet format. in tall and flat versions. They are used to modate printed marker strips. Once print-
These are available unprinted or printed in mark modular terminal blocks, modules or ed, the self-adhesive strip is simply stuck
accordance with customer requirements. connectors and can be supplied unprinted onto the zack marker strip.
or printed.

The marker strips can be used in both tall Self-adhesive marker strips can be applied Markers are available in both UniCard and
and flat marker grooves. They can be easily to all PCB terminal blocks and COMBICON UniSheet formats for labeling modular ter-
separated by hand since they are pre-perfo- plug-in connectors. They can be supplied minal blocks from other manufacturers.
rated for the pitch. printed on cards or unprinted on a roll.

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 57

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Marking and labeling - MARKING system
Terminal marking
UniCard terminal marking for a Can be printed with:
tall marker groove
P R I NT E D
F OR YOU

y
123
UV x
UV LED technology Plotter

120 markers for a terminal block width of

4.2 mm

Technical data
General data
Can be printed with: BLUEMARK CLED  BLUEMARK LED  CMS-P1-PLOTTER
– The UC-TM ... UniCard labeling range in- Number of individual labels 120
cludes markers for products with tall Number of individual labels per strip 15
Material PA
marker grooves Inflammability class according to UL 94 V2
– The markers, which are supplied in uni- Temperature range [°C] -40 ... 120
Wipe resistance DIN EN 61010-1 (VDE 0411-1)
form sheets, can be printed onto quickly Components free from silicone and halogen
and easily using the BLUEMARK CLED
Ordering data
– The format automatically ensures printing
with a high level of positional accuracy Description Color Type Order No.
Pcs. /
Pkt.
– The multi-section marking strips are easy
to fit and can be easily separated if re- UniCard, for labeling terminal blocks with a marker groove

quired white UC-TM 4 0818111 10

– The markers support multiline labeling red UC-TM 4 RD 0818250 10
orange UC-TM 4 OG 0818221 10
– The sheets provide space for including yellow UC-TM 4 YE 0818234 10
function texts violet UC-TM 4 VT 0819084 10
– Labeling service: Phoenix Contact can blue UC-TM 4 BU 0818247 10
green UC-TM 4 GN 0818263 10
custom-label all UniCard markers in ac- UniCard, for labeling terminal blocks with a marker groove,
cordance with your requirements labeled acc. to customer specifications1)
white UC-TM 4 CUS 0824573 1
Notes: red UC-TM 4 RD CUS 0824577 1
orange UC-TM 4 OG CUS 0824576 1
An overview of the markable terminal blocks that are available
yellow UC-TM 4 YE CUS 0824579 1
from Phoenix Contact can be found starting on page 112.
violet UC-TM 4 VT CUS 0824578 1
1) For ordering example, see page 359. blue UC-TM 4 BU CUS 0824574 1
green UC-TM 4 GN CUS 0824575 1

Accessories
Magazine, for CMS-P1-PLOTTER
P1 UC-MAG 1 5146079 1

58 PHOENIX CONTACT
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Marking and labeling - MARKING system
Terminal marking

P R I NT E D P R I NT E D P R I NT E D
F OR YOU F OR YOU F OR YOU

96 markers for a terminal block width of 80 markers for a terminal block width of 56 markers for a terminal block width of
5.2 mm 6.2 mm 8.2 mm

Technical data Technical data Technical data

BLUEMARK CLED  BLUEMARK LED  CMS-P1-PLOTTER BLUEMARK CLED  BLUEMARK LED  CMS-P1-PLOTTER BLUEMARK CLED  BLUEMARK LED  CMS-P1-PLOTTER
96 80 56
12 10 7
PA PA PA
V2 V2 V2
-40 ... 120 -40 ... 120 -40 ... 120
DIN EN 61010-1 (VDE 0411-1) DIN EN 61010-1 (VDE 0411-1) DIN EN 61010-1 (VDE 0411-1)
free from silicone and halogen free from silicone and halogen free from silicone and halogen

Ordering data Ordering data Ordering data

Pcs. / Pcs. / Pcs. /

Type Order No. Type Order No. Type Order No.
Pkt. Pkt. Pkt.

UC-TM 5 0818108 10 UC-TM 6 0818085 10 UC-TM 8 0818072 10

UC-TM 5 RD 0818302 10 UC-TM 6 RD 0818357 10 UC-TM 8 RD 0818409 10
UC-TM 5 OG 0818276 10 UC-TM 6 OG 0818328 10 UC-TM 8 OG 0818373 10
UC-TM 5 YE 0818289 10 UC-TM 6 YE 0818331 10 UC-TM 8 YE 0818386 10
UC-TM 5 VT 0819107 10 UC-TM 6 VT 0819110 10 UC-TM 8 VT 0819123 10
UC-TM 5 BU 0818292 10 UC-TM 6 BU 0818344 10 UC-TM 8 BU 0818399 10
UC-TM 5 GN 0818315 10 UC-TM 6 GN 0818360 10 UC-TM 8 GN 0818412 10

UC-TM 5 CUS 0824581 1 UC-TM 6 CUS 0824589 1 UC-TM 8 CUS 0824597 1

UC-TM 5 RD CUS 0824585 1 UC-TM 6 RD CUS 0824593 1 UC-TM 8 RD CUS 0824601 1
UC-TM 5 OG CUS 0824584 1 UC-TM 6 OG CUS 0824592 1 UC-TM 8 OG CUS 0824600 1
UC-TM 5 YE CUS 0824587 1 UC-TM 6 YE CUS 0824595 1 UC-TM 8 YE CUS 0824603 1
UC-TM 5 VT CUS 0824586 1 UC-TM 6 VT CUS 0824594 1 UC-TM 8 VT CUS 0824602 1
UC-TM 5 BU CUS 0824582 1 UC-TM 6 BU CUS 0824590 1 UC-TM 8 BU CUS 0824598 1
UC-TM 5 GN CUS 0824583 1 UC-TM 6 GN CUS 0824591 1 UC-TM 8 GN CUS 0824599 1

Accessories Accessories Accessories

P1 UC-MAG 1 5146079 1 P1 UC-MAG 1 5146079 1 P1 UC-MAG 1 5146079 1

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 59

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Marking and labeling - MARKING system
Terminal marking
UniCard terminal marking for a Can be printed with:
tall marker groove
P R I NT E D
F OR YOU

y
123
UV x
UV LED technology Plotter

48 markers for a terminal block width of

10.2 mm

Technical data
General data
Can be printed with: BLUEMARK CLED  BLUEMARK LED  CMS-P1-PLOTTER
– The UC-TM ... UniCard labeling range in- Number of individual labels 48
cludes markers for products with tall Number of individual labels per strip 6
Material PA
marker grooves Inflammability class according to UL 94 V2
– The markers, which are supplied in uni- Temperature range [°C] -40 ... 120
Wipe resistance DIN EN 61010-1 (VDE 0411-1)
form sheets, can be printed onto quickly Components free from silicone and halogen
and easily using the BLUEMARK CLED
Ordering data
– The format automatically ensures printing
with a high level of positional accuracy Description Color Type Order No.
Pcs. /
Pkt.
– The multi-section marking strips are easy
to fit and can be easily separated if re- UniCard, for labeling terminal blocks with a marker groove

quired white UC-TM 10 0818069 10

– The markers support multiline labeling red UC-TM 10 RD 0818454 10
orange UC-TM 10 OG 0818425 10
– The sheets provide space for including yellow UC-TM 10 YE 0818438 10
function texts violet UC-TM 10 VT 0815936 10
– Labeling service: Phoenix Contact can blue UC-TM 10 BU 0818441 10
green UC-TM 10 GN 0818467 10
custom-label all UniCard markers in ac- UniCard, for labeling terminal blocks with a marker groove,
cordance with your requirements labeled acc. to customer specifications1)
white UC-TM 10 CUS 0824605 1
Notes: white UC-TM 10 RD CUS 0824609 1
white UC-TM 10 OG CUS 0824608 1
An overview of the markable terminal blocks that are available
white UC-TM 10 YE CUS 0824611 1
from Phoenix Contact can be found starting on page 112.
white UC-TM 10 VT CUS 0824610 1
1) For ordering example, see page 359. white UC-TM 10 BU CUS 0824606 1
white UC-TM 10 GN CUS 0824607 1

Accessories
Magazine, for CMS-P1-PLOTTER
P1 UC-MAG 1 5146079 1

60 PHOENIX CONTACT
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Marking and labeling - MARKING system
Terminal marking

P R I NT E D P R I NT E D
F OR YOU F OR YOU

40 markers for a terminal block width of 12 mm 32 markers for a terminal block width of 16 mm

Technical data Technical data

BLUEMARK CLED  BLUEMARK LED  CMS-P1-PLOTTER BLUEMARK CLED  BLUEMARK LED  CMS-P1-PLOTTER
40 32
5 4
PA PA
V2 V2
-40 ... 120 -40 ... 120
DIN EN 61010-1 (VDE 0411-1) DIN EN 61010-1 (VDE 0411-1)
free from silicone and halogen free from silicone and halogen

Ordering data Ordering data

Pcs. / Pcs. /
Type Order No. Type Order No.
Pkt. Pkt.

UC-TM 12 0819194 10 UC-TM 16 0819217 10

UC-TM 12 RD 0817701 10 UC-TM 16 RD 0817798 10
UC-TM 12 OG 0817691 10 UC-TM 16 OG 0817772 10
UC-TM 12 YE 0819204 10 UC-TM 16 YE 0819220 10
UC-TM 12 VT 0822660 10 UC-TM 16 VT 0822673 10
UC-TM 12 BU 0817785 10 UC-TM 16 BU 0817769 10
UC-TM 12 GN 0817808 10 UC-TM 16 GN 0817756 10

UC-TM 12 CUS 0824613 1 UC-TM 16 CUS 0824621 1

UC-TM 12 RD CUS 0824617 1 UC-TM 16 RD CUS 0824625 1
UC-TM 12 OG CUS 0824616 1 UC-TM 16 OG CUS 0824624 1
UC-TM 12 YE CUS 0824619 1 UC-TM 16 YE CUS 0824627 1
UC-TM 12 VT CUS 0824618 1 UC-TM 16 VT CUS 0824626 1
UC-TM 12 BU CUS 0824614 1 UC-TM 16 BU CUS 0824622 1
UC-TM 12 GN CUS 0824615 1 UC-TM 16 GN CUS 0824623 1

Accessories Accessories

P1 UC-MAG 1 5146079 1 P1 UC-MAG 1 5146079 1

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 61

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Marking and labeling - MARKING system
Terminal marking
UniCard terminal marking for a flat Can be printed with:
marker groove
P R I NT E D
F OR YOU

y
123
UV x
UV LED technology Plotter

120 markers for a terminal block width of

4.2 mm

Technical data
General data
Can be printed with: BLUEMARK CLED  BLUEMARK LED  CMS-P1-PLOTTER
– The UC-TMF ... UniCard labeling range Number of individual labels 120
includes markers for products with Number of individual labels per strip 15
Material PA
tall and flat marker grooves Inflammability class according to UL 94 V2
– Labeling service: Phoenix Contact can Temperature range [°C] -40 ... 120
Wipe resistance DIN EN 61010-1 (VDE 0411-1)
custom-label all UniCard markers in Components free from silicone and halogen
accordance with your requirements
Ordering data
Notes:
Pcs. /
An overview of the markable terminal blocks that are available Description Color Type Order No.
Pkt.
from Phoenix Contact can be found starting on page 112.
1) UniCard, for labeling terminal blocks with a flat marker groove
For ordering example, see page 359.
white UC-TMF 4 0818166 10
red UC-TMF 4 RD 0818506 10
orange UC-TMF 4 OG 0818470 10
yellow UC-TMF 4 YE 0818483 10
violet UC-TMF 4 VT 0815897 10
blue UC-TMF 4 BU 0818496 10
green UC-TMF 4 GN 0818519 10
UniCard, for labeling terminal blocks with a flat marker groove,
labeled acc. to customer specifications1)
white UC-TMF 4 CUS 0824630 1
red UC-TMF 4 RD CUS 0824634 1
orange UC-TMF 4 OG CUS 0824633 1
yellow UC-TMF 4 YE CUS 0824636 1
violet UC-TMF 4 VT CUS 0824635 1
blue UC-TMF 4 BU CUS 0824631 1
green UC-TMF 4 GN CUS 0824632 1

Accessories
Magazine, for CMS-P1-PLOTTER
P1 UC-MAG 4 5146105 1

62 PHOENIX CONTACT
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Marking and labeling - MARKING system
Terminal marking

P R I NT E D P R I NT E D P R I NT E D
F OR YOU F OR YOU F OR YOU

96 markers for a terminal block width of 80 markers for a terminal block width of 56 markers for a terminal block width of
5.2 mm 6.2 mm 8.2 mm

Technical data Technical data Technical data

BLUEMARK CLED  BLUEMARK LED  CMS-P1-PLOTTER BLUEMARK CLED  BLUEMARK LED  CMS-P1-PLOTTER BLUEMARK CLED  BLUEMARK LED  CMS-P1-PLOTTER
96 80 56
12 10 7
PA PA PA
V2 V2 V2
-40 ... 120 -40 ... 120 -40 ... 120
DIN EN 61010-1 (VDE 0411-1) DIN EN 61010-1 (VDE 0411-1) DIN EN 61010-1 (VDE 0411-1)
free from silicone and halogen free from silicone and halogen free from silicone and halogen

Ordering data Ordering data Ordering data

Pcs. / Pcs. / Pcs. /

Type Order No. Type Order No. Type Order No.
Pkt. Pkt. Pkt.

UC-TMF 5 0818153 10 UC-TMF 6 0818140 10 UC-TMF 8 0818137 10

UC-TMF 5 RD 0818551 10 UC-TMF 6 RD 0818603 10 UC-TMF 8 RD 0818658 10
UC-TMF 5 OG 0818522 10 UC-TMF 6 OG 0818577 10 UC-TMF 8 OG 0818629 10
UC-TMF 5 YE 0818535 10 UC-TMF 6 YE 0818580 10 UC-TMF 8 YE 0818632 10
UC-TMF 5 VT 0815907 10 UC-TMF 6 VT 0815910 10 UC-TMF 8 VT 0815923 10
UC-TMF 5 BU 0818548 10 UC-TMF 6 BU 0818593 10 UC-TMF 8 BU 0818645 10
UC-TMF 5 GN 0818564 10 UC-TMF 6 GN 0818616 10 UC-TMF 8 GN 0818661 10

UC-TMF 5 CUS 0824638 1 UC-TMF 6 CUS 0824646 1 UC-TMF 8 CUS 0824654 1

UC-TMF 5 RD CUS 0824642 1 UC-TMF 6 RD CUS 0824650 1 UC-TMF 8 RD CUS 0824658 1
UC-TMF 5 OG CUS 0824641 1 UC-TMF 6 OG CUS 0824649 1 UC-TMF 8 OG CUS 0824657 1
UC-TMF 5 YE CUS 0824644 1 UC-TMF 6 YE CUS 0824652 1 UC-TMF 8 YE CUS 0824660 1
UC-TMF 5 VT CUS 0824643 1 UC-TMF 6 VT CUS 0824651 1 UC-TMF 8 VT CUS 0824659 1
UC-TMF 5 BU CUS 0824639 1 UC-TMF 6 BU CUS 0824647 1 UC-TMF 8 BU CUS 0824655 1
UC-TMF 5 GN CUS 0824640 1 UC-TMF 6 GN CUS 0824648 1 UC-TMF 8 GN CUS 0824656 1

Accessories Accessories Accessories

P1 UC-MAG 4 5146105 1 P1 UC-MAG 4 5146105 1 P1 UC-MAG 4 5146105 1

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 63

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Marking and labeling - MARKING system
Terminal marking
UniCard terminal marking for a flat Can be printed with:
marker groove
P R I NT E D
F OR YOU

y
123
UV x
UV LED technology Plotter

48 markers for a terminal block width of

10.2 mm

Technical data
General data
Can be printed with: BLUEMARK CLED  BLUEMARK LED  CMS-P1-PLOTTER
– The UC-TMF ... UniCard labeling range Number of individual labels 48
includes markers for products with tall Number of individual labels per strip 6
Material PA
and flat marker grooves Inflammability class according to UL 94 V2
– Labeling service: Phoenix Contact can Temperature range [°C] -40 ... 120
Wipe resistance DIN EN 61010-1 (VDE 0411-1)
custom-label all UniCard markers in ac- Components free from silicone and halogen
cordance with your requirements
Ordering data
Notes:
Pcs. /
1) For ordering example, see page 359. Description Color Type Order No.
Pkt.
UniCard materials, for labeling terminal blocks with a flat marker
groove

white UC-TMF 10 0818124 10

red UC-TMF 10 RD 0818700 10
orange UC-TMF 10 OG 0818674 10
yellow UC-TMF 10 YE 0818687 10
violet UC-TMF 10 VT 0815981 10
blue UC-TMF 10 BU 0818690 10
green UC-TMF 10 GN 0818713 10
UniCard, for labeling terminal blocks with a flat marker groove,
labeled acc. to customer specifications1)
white UC-TMF 10 CUS 0824662 1
red UC-TMF 10 RD CUS 0824666 1
orange UC-TMF 10 OG CUS 0824665 1
yellow UC-TMF 10 YE CUS 0824668 1
violet UC-TMF 10 VT CUS 0824667 1
blue UC-TMF 10 BU CUS 0824663 1
green UC-TMF 10 GN CUS 0824664 1

Accessories
Magazine, for CMS-P1-PLOTTER
P1 UC-MAG 4 5146105 1

64 PHOENIX CONTACT
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Marking and labeling - MARKING system
Terminal marking

P R I NT E D P R I NT E D
F OR YOU F OR YOU

40 markers for a terminal block width of 12 mm 32 markers for a terminal block width of 16 mm

Technical data Technical data

BLUEMARK CLED  BLUEMARK LED  CMS-P1-PLOTTER BLUEMARK CLED  BLUEMARK LED  CMS-P1-PLOTTER
40 32
5 4
PA PA
V2 V2
-40 ... 120 -40 ... 120
DIN EN 61010-1 (VDE 0411-1) DIN EN 61010-1 (VDE 0411-1)
free from silicone and halogen free from silicone and halogen

Ordering data Ordering data

Pcs. / Pcs. /
Type Order No. Type Order No.
Pkt. Pkt.

UC-TMF 12 0819233 10 UC-TMF 16 0819262 10

UC-TMF 12 RD 0817840 10 UC-TMF 16 RD 0817824 10
UC-TMF 12 OG 0817866 10 UC-TMF 16 OG 0817811 10
UC-TMF 12 YE 0819246 10 UC-TMF 16 YE 0819259 10
UC-TMF 12 VT 0822686 10 UC-TMF 16 VT 0822699 10
UC-TMF 12 BU 0817853 10 UC-TMF 16 BU 0817905 10
UC-TMF 12 GN 0817837 10 UC-TMF 16 GN 0817921 10

UC-TMF 12 CUS 0824670 1 UC-TMF 16 CUS 0824678 1

UC-TMF 12 RD CUS 0824674 1 UC-TMF 16 RD CUS 0824682 1
UC-TMF 12 OG CUS 0824673 1 UC-TMF 16 OG CUS 0824681 1
UC-TMF 12 YE CUS 0824676 1 UC-TMF 16 YE CUS 0824684 1
UC-TMF 12 VT CUS 0824675 1 UC-TMF 16 VT CUS 0824683 1
UC-TMF 12 BU CUS 0824671 1 UC-TMF 16 BU CUS 0824679 1
UC-TMF 12 GN CUS 0824672 1 UC-TMF 16 GN CUS 0824680 1

Accessories Accessories

P1 UC-MAG 4 5146105 1 P1 UC-MAG 4 5146105 1

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 65

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Marking and labeling - MARKING system
Terminal marking
UniCard terminal marking Can be printed with:
for marking stud holders

y
123
UV x
UV LED technology Plotter

Stud-type markers for terminal block widths of

5.2 / 7.5 / 10 mm

Technical data
General data
Can be printed with: BLUEMARK CLED  BLUEMARK LED  CMS-P1-PLOTTER
– The UC-TMN ... UniCard labeling range Material PA
includes markers for products with a Inflammability class according to UL 94 V2
Temperature range [°C] -40 ... 120
marking stud holder, such as mini terminal Wipe resistance DIN EN 61010-1 (VDE 0411-1)
blocks, transformer terminal blocks or Components free from silicone and halogen
COMBICON PCB connection terminal Ordering data
blocks
Pcs. /
– The markers, which are supplied in uni- Description Color Type Order No.
Pkt.
form sheets, can be printed onto quickly UniCard, for labeling transformer terminal blocks
and easily using the BLUEMARK CLED
96-section white UC-TMN 5,2 0822945 10
– The format automatically ensures printing 64-section white UC-TMN 7,5 0821823 10
with a high level of positional accuracy 48-section white UC-TMN 10 0828554 10
– The multi-section marking strips are easy Accessories
to fit and can be easily separated if re- Magazine, for CMS-P1-PLOTTER
quired P1 UC-MAG 1 5146079 1
– The sheets provide space for including
function texts
– Labeling service: Phoenix Contact can
custom-label all UniCard markers in ac-
cordance with your requirements
Notes:
An overview of the markable terminal blocks that are available
from Phoenix Contact can be found starting on page 112.
1) For ordering example, see page 359.

66 PHOENIX CONTACT
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Marking and labeling - MARKING system
Terminal marking

P R I NT E D
F OR YOU

Labeled according to customer specifications

Technical data

-
PA
V2
-40 ... 120
DIN EN 61010-1 (VDE 0411-1)
free from silicone and halogen

Ordering data

Pcs. /
Type Order No.
Pkt.

UC-TMN 5,2 CUS 0826857 1

UC-TMN 7,5 CUS 0824690 1
UC-TMN 10 CUS 0829109 1

Accessories

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 67

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Marking and labeling - MARKING system
Terminal marking
Zack marker strip terminal marking Can be printed with:
for a tall marker groove
P R I NT E D
F OR YOU

y
123
x
Plotter

Markers for a terminal block width of 3.5 mm

Technical data
General data
Can be printed with: CMS-P1-PLOTTER
– The ZB zack marker strip system is a la- Material PA
beling solution for modular terminal Inflammability class according to UL 94 V2
Temperature range [°C] -40 ... 100
blocks and electronic modules with tall Wipe resistance DIN EN 61010-1 (VDE 0411-1)
marker grooves Components free from silicone and halogen
– The multi-section marking strips are easy Ordering data
to fit and can be easily separated if re-
Pcs. /
quired Description Color Type Order No.
Pkt.
– Different pitches are possible on request Zack marker strip, 10-section, unprinted: pack contains enough
– Unlabeled marking strips can be custom- to label 100 terminal blocks
labeled with a plotter or by hand white ZB 3,5:UNBEDRUCKT 0829414 10
– Labeling service: Phoenix Contact can as above, however, large batch, sufficient for 1000 white
terminal blocks
custom-label all zack marker strip mark-
ers in accordance with your requirements Zack marker strip, printed horizontally, ten sections with con-
secutive numbers, e.g., 1 - 10, 11 - 20, etc. up to 91 - 100,
Selection of labeling direction (ZB 3,5 and ZB 4, max. 2 digits)1)
white ZB 3,5,LGS:FORTL.ZAHLEN 0801404 10
– Please take care to select the correct Zack marker strip, printed horizontally, 10-section,
labeling direction for printed products 1
with same numbers, e.g., 1/1/1, 2/2/2, etc. up to 100/100/100 )
– ① “Printed horizontally” labeling, text is white
the right way round for a horizontally Zack marker strip, 10-section, printed horizontally:
with L1, L2, L3, N, PE1)
arranged terminal strip white
– ② “Printed vertically” labeling, text is the U, V, W, N,  white
right way round for a vertically arranged Zack marker strip, printed vertically, 10-section,
with consecutive numbers, e.g., 1-10, 11-20, etc. up to 91-1001)
terminal strip white ZB 3,5,QR:FORT.ZAHLEN 0801405 10
Special marking zack marker strip, 10-section, separable,
Notes: labeled acc. to customer specifications, (ZB 3,5 and ZB 4, max. 2
1) 10 identically marked strips make up one packing unit (PU). digits), please specify the required marking when ordering2)

white ZB 3,5 CUS 0829415 1

2) For ordering example, see page 359.
Accessories
Magazine, for CMS-P1-PLOTTER
CMS-P1-M/ZB 5144699 1

1 2 3 4 5 6 7 8 9 10

2
10
1
2

6
7

9
8
5
3

68 PHOENIX CONTACT
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Marking and labeling - MARKING system
Terminal marking

P R I NT E D P R I NT E D P R I NT E D
F OR YOU F OR YOU F OR YOU

Markers for a terminal block width of 4.2 mm Markers for a terminal block width of 5.2 mm Markers for a terminal block width of 5.08 mm

Technical data Technical data Technical data

CMS-P1-PLOTTER CMS-P1-PLOTTER CMS-P1-PLOTTER

PA PA PA
V2 V2 V2
-40 ... 100 -40 ... 100 -40 ... 100
DIN EN 61010-1 (VDE 0411-1) DIN EN 61010-1 (VDE 0411-1) DIN EN 61010-1 (VDE 0411-1)
free from silicone and halogen free from silicone and halogen free from silicone and halogen

Ordering data Ordering data Ordering data

Pcs. / Pcs. / Pcs. /

Type Order No. Type Order No. Type Order No.
Pkt. Pkt. Pkt.

ZB 4 :UNBEDRUCKT 0805001 10 ZB 5 :UNBEDRUCKT 1050004 10 ZB 5,08:UNBEDRUCKT 0809793 10

ZB 4/WH-100:UNBEDRUCKT 0805810 100 ZB 5/WH-100:UNBEDRUCKT 5060906 100

ZB 4,LGS:FORTL.ZAHLEN 0805739 10 ZB 5,LGS:FORTL.ZAHLEN 1050017 10 ZB 5,08,LGS:FORTL.ZAHLEN 0809803 10

ZB 5,LGS:GLEICHE ZAHLEN 1050033 10

ZB 5,LGS:L1-N,PE 1050415 10 ZB 5,08,LGS:L1-N,PE 0809832 10

ZB 5,08,LGS:U-N 0809845 10

ZB 4,QR:FORTL.ZAHLEN 0805807 10 ZB 5,QR:FORTL.ZAHLEN 1050020 10 ZB 5,08,QR:FORTL.ZAHLEN 0809858 10

ZB 4 CUS 0824951 1 ZB 5 CUS 0824962 1 ZB 5,08 CUS 0824963 1

Accessories Accessories Accessories

CMS-P1-M/ZB 5144699 1 CMS-P1-M/ZB 5144699 1 CMS-P1-M/ZB 5144699 1

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 69

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Marking and labeling - MARKING system
Terminal marking
Zack marker strip terminal marking
for a tall marker groove
P R I NT E D P R I NT E D
F OR YOU F OR YOU
– The ZB zack marker strip system is a la-
beling solution for modular terminal
blocks and electronic modules with tall
marker grooves
– Labeling service: Phoenix Contact can
custom-label all zack marker strip mark-
ers in accordance with your requirements
Notes:
1) 10 identically marked strips make up one packing unit (PU).
Markers for a terminal block width of 6.2 mm Markers for a terminal block width of 6.6 mm
2) For ordering example, see page 359.

Technical data Technical data

General data
Can be printed with: CMS-P1-PLOTTER CMS-P1-PLOTTER
Material PA PA
Inflammability class according to UL 94 V2 V2
Temperature range [°C] -40 ... 100 -40 ... 100
Wipe resistance DIN EN 61010-1 (VDE 0411-1) DIN EN 61010-1 (VDE 0411-1)
Components free from silicone and halogen free from silicone and halogen

Ordering data Ordering data

Pcs. / Pcs. /
Description Color Type Order No. Type Order No.
Pkt. Pkt.
Zack marker strip, 10-section, unprinted:
pack contains enough to label 100 terminal blocks

white ZB 6:UNBEDRUCKT 1051003 10 ZB 6,6:UNBEDRUCKT 1052332 10

as above, however, large batch, sufficient for 1000 white
terminal blocks

Zack marker strip, printed horizontally, 10-section,

with consecutive numbers, e.g., 1-10, 11-20, etc. up to 91-100

white ZB 6,LGS:FORTL.ZAHLEN 1051016 10 ZB 6,6,LGS:FORTL.ZAHLEN 1052345 10

Zack marker strip, printed horizontally, 10-section, with same
numbers, e.g., 1/1/1, 2/2/2, etc. up to 100/100/100

white ZB 6,LGS:GLEICHE ZAHLEN 1051032 10

Zack marker strip, 10-section, printed horizontally:
with L1, L2, L3, N, PE
white ZB 6,LGS:L1-N,PE 1051414 10
U, V, W, N,  white ZB 6,LGS:U-N 1051430 10
Zack marker strip, printed vertically, 10-section, with consecu-
tive numbers, e.g., 1-10, 11-20, etc. up to 91-1001)
white ZB 6,QR:FORTL.ZAHLEN 1051029 10
Zack marker strip, special printing, 10-section, divisible,
marking according to customer requirements, please specify the
desired marking with order2)

white ZB 6 CUS 0824992 1 ZB 6,6 CUS 0824978 1

Accessories Accessories
Magazine, for CMS-P1-PLOTTER
CMS-P1-M/ZB 5144699 1 CMS-P1-M/ZB 5144699 1

70 PHOENIX CONTACT
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Marking and labeling - MARKING system
Terminal marking

P R I NT E D P R I NT E D P R I NT E D
F OR YOU F OR YOU F OR YOU

Markers for a terminal block width of 7.5 mm Markers for a terminal block width of 7.62 mm Markers for a terminal block width of 8.2 mm

Technical data Technical data Technical data

CMS-P1-PLOTTER CMS-P1-PLOTTER CMS-P1-PLOTTER

PA PA PA
V2 V2 V2
-40 ... 100 -40 ... 100 -40 ... 100
DIN EN 61010-1 (VDE 0411-1) DIN EN 61010-1 (VDE 0411-1) DIN EN 61010-1 (VDE 0411-1)
free from silicone and halogen free from silicone and halogen free from silicone and halogen

Ordering data Ordering data Ordering data

Pcs. / Pcs. / Pcs. /

Type Order No. Type Order No. Type Order No.
Pkt. Pkt. Pkt.

ZB 7,5:UNBEDRUCKT 0803948 10 ZB 7,62:UNBEDRUCKT 1054000 10 ZB 8:UNBEDRUCKT 1052002 10

ZB 7,62/WH-100:UNBEDRUCKT 5060922 100 ZB 8/WH-100:UNBEDRUCKT 5060896 100

ZB 7,62,LGS:FORTL.ZAHLEN 1054233 10 ZB 8,LGS:FORTL.ZAHLEN 1052015 10

ZB 8,LGS:L1-N,PE 1052413 10

ZB 8,QR:FORTL.ZAHLEN 1052028 10

ZB 7,5 CUS 0824994 1 ZB 7,62 CUS 0824997 1 ZB 8 CUS 0825011 1

Accessories Accessories Accessories

CMS-P1-M/ZB 5144699 1 CMS-P1-M/ZB 5144699 1 CMS-P1-M/ZB 5144699 1

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 71

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Marking and labeling - MARKING system
Terminal marking
Zack marker strip terminal marking
for a tall marker groove
P R I NT E D P R I NT E D
F OR YOU F OR YOU
– The ZB zack marker strip system is a
labeling solution for modular terminal
blocks and electronic modules with
tall marker grooves
– Labeling service: Phoenix Contact can
custom-label all zack marker strip mark-
ers in accordance with your requirements
Notes:
1) 10 identically marked strips make up one packing unit (PU).
Markers for a terminal block width of 9 mm Markers for a terminal block width of 10.2 mm

Technical data Technical data

General data
Can be printed with: CMS-P1-PLOTTER CMS-P1-PLOTTER
Material PA PA
Inflammability class according to UL 94 V2 V2
Temperature range [°C] -40 ... 100 -40 ... 100
Wipe resistance DIN EN 61010-1 (VDE 0411-1) DIN EN 61010-1 (VDE 0411-1)
Components free from silicone and halogen free from silicone and halogen

Ordering data Ordering data

Pcs. / Pcs. /
Description Color Type Order No. Type Order No.
Pkt. Pkt.
Zack marker strip, 10-section, unprinted:
pack contains enough to label 100 terminal blocks

white ZB 9:UNBEDRUCKT 0829127 10 ZB 10:UNBEDRUCKT 1053001 10

as above, however, large batch, sufficient for 1000 white ZB10/WH-100:UNBEDRUCKT 5060883 100
terminal blocks

5-section white
Flat Zack marker strip, 10-section, printed horizontally:
with consecutive numbers, e.g., 1-10, 11-20, etc. up to 91-1001)

white ZB10,LGS:FORTL.ZAHLEN 1053014 10

Zack marker strip, printed horizontally, 10-section,
1
with same numbers, e.g., 1/1/1, 2/2/2, etc. up to 100/100/100 )

white ZB10,LGS:GLEICHE ZAHLEN 1053030 10

Zack marker strip, 10-section, printed horizontally:
with L1, L2, L3, N, PE1)
white ZB10,LGS:L1-N,PE 1053412 10
U, V, W, N,  white ZB10,LGS:U-N 1053438 10
5-section white
Zack marker strip, printed vertically, 10-section,
with consecutive numbers, e.g., 1-10, 11-20, etc. up to 91-1001)
white ZB10,QR:FORTL.ZAHLEN 1053027 10
Zack marker strip, special printing, 10-section, divisible,
marking according to customer requirements, please specify the
desired marking with order
white ZB 9 CUS 0829128 1 ZB 10 CUS 0824941 1
5-section white

Accessories Accessories
Magazine, for CMS-P1-PLOTTER
CMS-P1-M/ZB 5144699 1 CMS-P1-M/ZB 5144699 1

72 PHOENIX CONTACT
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Marking and labeling - MARKING system
Terminal marking

P R I NT E D P R I NT E D P R I NT E D
F OR YOU F OR YOU F OR YOU

Markers for a terminal block width of 12 mm Markers for a terminal block width of 13 mm Markers for a terminal block width of 15 mm

Technical data Technical data Technical data

CMS-P1-PLOTTER CMS-P1-PLOTTER CMS-P1-PLOTTER

PA PA PA
V2 V2 V2
-40 ... 100 -40 ... 100 -40 ... 100
DIN EN 61010-1 (VDE 0411-1) DIN EN 61010-1 (VDE 0411-1) DIN EN 61010-1 (VDE 0411-1)
free from silicone and halogen free from silicone and halogen free from silicone and halogen

Ordering data Ordering data Ordering data

Pcs. / Pcs. / Pcs. /

Type Order No. Type Order No. Type Order No.
Pkt. Pkt. Pkt.

ZB 12:UNPRINTED 0812120 10 ZB 13:UNBEDRUCKT 0829131 10 ZB 15:UNBEDRUCKT 0811972 10

ZB 12,LGS:L1-N,PE 0812146 10 ZB 15,LGS:L1-N,PE 0811998 10

ZB 12 CUS 0824942 1 ZB 13 CUS 0829132 1 ZB 15 CUS 0824945 1

Accessories Accessories Accessories

CMS-P1-M/ZB 5144699 1 CMS-P1-M/ZB 5144699 1 CMS-P1-M/ZB 5144699 1

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 73

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Marking and labeling - MARKING system
Terminal marking
Zack marker strip terminal marking
for a tall marker groove
P R I NT E D P R I NT E D
F OR YOU F OR YOU
– The ZB zack marker strip system is a
labeling solution for modular terminal
blocks and electronic modules with
tall marker grooves
– Labeling service: Phoenix Contact can
custom-label all zack marker strip mark-
ers in accordance with your requirements
Notes:
1) 10 identically marked strips make up one packing unit (PU).
Markers for a terminal block width of 16.3 mm Markers for a terminal block width of 17 mm
2) For ordering example, see page 359.

Technical data Technical data

General data
Can be printed with: CMS-P1-PLOTTER CMS-P1-PLOTTER
Material PA PA
Inflammability class according to UL 94 V2 V2
Temperature range [°C] -40 ... 100 -40 ... 100
Wipe resistance DIN EN 61010-1 (VDE 0411-1) DIN EN 61010-1 (VDE 0411-1)
Components free from silicone and halogen free from silicone and halogen

Ordering data Ordering data

Pcs. / Pcs. /
Description Color Type Order No. Type Order No.
Pkt. Pkt.
Zack marker strip, 5-section, unprinted:
pack contains enough to label 50 terminal blocks

white ZB 16,3:UNPRINTED 0820222 10 ZB 17:UNBEDRUCKT 0829391 10

4-part, for 40 terminals white
Zack marker strip, 5-section, printed horizontally:
With L1, L2, L3, N, PE1)
white
4-section white
Zack marker strip, special printing, 5-section, divisible,
marking according to customer requirements, please specify
the desired marking with order2)

white ZB 16,3 CUS 0824946 1 ZB 17 CUS 0829393 1

4-section white

Accessories Accessories
Magazine, for CMS-P1-PLOTTER
CMS-P1-M/ZB 5144699 1 CMS-P1-M/ZB 5144699 1

74 PHOENIX CONTACT
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Marking and labeling - MARKING system
Terminal marking

P R I NT E D P R I NT E D
F OR YOU F OR YOU

Markers for a terminal block width of 18 mm Markers for a terminal block width of 22 mm

Technical data Technical data

CMS-P1-PLOTTER CMS-P1-PLOTTER
PA PA
V2 V2
-40 ... 100 -40 ... 100
DIN EN 61010-1 (VDE 0411-1) DIN EN 61010-1 (VDE 0411-1)
free from silicone and halogen free from silicone and halogen

Ordering data Ordering data

Pcs. / Pcs. /
Type Order No. Type Order No.
Pkt. Pkt.

ZB 18:UNBEDRUCKT 0811833 10
ZB 22:UNBEDRUCKT 0811862 10

ZB 18,LGS:L1-N,PE 0811846 10
ZB 22,LGS:L1-N,PE 0811875 10

ZB 18 CUS 0824947 1
ZB 22 CUS 0824949 1

Accessories Accessories

CMS-P1-M/ZB 5144699 1 CMS-P1-M/ZB 5144699 1

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 75

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Marking and labeling - MARKING system
Terminal marking
Zack marker strip terminal marking Can be printed with:
for a flat marker groove
P R I NT E D
F OR YOU

y
123
x
Plotter

Markers for a terminal block width of 3.5 mm

Technical data
General data
Can be printed with: CMS-P1-PLOTTER
– The ZBF flat zack marker strip system is a Material PA
labeling solution for modular terminal Inflammability class according to UL 94 V2
Temperature range [°C] -40 ... 100
blocks and electronic modules with tall Wipe resistance DIN EN 61010-1 (VDE 0411-1)
and flat marker grooves Components free from silicone and halogen
– The multi-section marking strips are easy Ordering data
to fit and can be easily separated if re-
Pcs. /
quired Description Color Type Order No.
Pkt.
– Different pitches are possible on request Zack marker strip, flat, 10-section, unprinted:
– Unlabeled marking strips can be custom- pack contains enough to label 100 terminal blocks
labeled with a plotter or by hand white ZBF 3,5:UNBEDRUCKT 0829392 10
– Labeling service: Phoenix Contact can as above, however, large batch, sufficient for 1000 white
terminal blocks
custom-label all zack marker strip mark-
ers in accordance with your requirements Zack marker strip, flat, printed horizontally,
ten sections with consecutive numbers, e.g., 1 - 10, 11 - 20, etc. up
Selection of labeling direction to 91 - 100, (ZBF 3,5 and ZBF 4, max. 2 digits)1)

– Please take care to select the correct white ZBF 3,5,LGS:FORTL.ZAHLEN 0801406 10
labeling direction for printed products Zack marker strip, flat, printed horizontally, 10-section,
with even numbers, e.g., 2-20, 22-40, etc. up to 82-100, (ZBF 4
– ① “Printed horizontally” labeling, text is max. 2-digit)1)
the right way round for a horizontally white
Zack marker strip, flat, printed horizontally, 10-section,
arranged terminal strip with odd numbers, e.g., 1-19, 21-39, etc. up to 81-99, (ZBF 4 max.
– ② “Printed vertically” labeling, text is the 2-digit)1)
white
right way round for a vertically arranged Zack marker strip, flat, printed vertically, 10-section,
terminal strip with consecutive numbers, e.g., 1-10, 11-20, etc. up to 91-1001)

Notes: white ZBF 3,5,QR:FORTL.ZAHLEN 0801407 10

Special marking zack marker strip, flat, 10-section,
An overview of the markable terminal blocks that are available
separable, marking acc. to customer specifications,
from Phoenix Contact can be found starting on page 112.
(ZBF 3,5 and ZBF 4 max. 2 digits), please specify the required
1) 10 identically marked strips make up one packing unit (PU). marking when ordering2)
white ZBF 3,5 CUS 0829394 1
2) For ordering example, see page 359. Accessories
Magazine, for CMS-P1-PLOTTER
CMS-P1-M/ZBF 5144709 1

1 2 3 4 5 6 7 8 9 10

2
10
1
2

6
7

9
8
5
3

76 PHOENIX CONTACT
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Marking and labeling - MARKING system
Terminal marking

P R I NT E D P R I NT E D P R I NT E D
F OR YOU F OR YOU F OR YOU

Markers for a terminal block width of 4.2 mm Markers for a terminal block width of 5.2 mm Markers for a terminal block width of 6.2 mm

Technical data Technical data Technical data

CMS-P1-PLOTTER CMS-P1-PLOTTER CMS-P1-PLOTTER

PA PA PA
V2 V2 V2
-40 ... 100 -40 ... 100 -40 ... 100
DIN EN 61010-1 (VDE 0411-1) DIN EN 61010-1 (VDE 0411-1) DIN EN 61010-1 (VDE 0411-1)
free from silicone and halogen free from silicone and halogen free from silicone and halogen

Ordering data Ordering data Ordering data

Pcs. / Pcs. / Pcs. /

Type Order No. Type Order No. Type Order No.
Pkt. Pkt. Pkt.

ZBF 4:UNBEDRUCKT 0808587 10 ZBF 5:UNBEDRUCKT 0808642 10 ZBF 6:UNBEDRUCKT 0808710 10

ZBF 4/WH-100:UNBEDRUCKT 0808613 100 ZBF 5/WH-100:UNBEDRUCKT 0808668 100 ZBF 6/WH-100:UNBEDRUCKT 0808736 100

ZBF 4,LGS:FORTL.ZAHLEN 0808626 10 ZBF 5,LGS:FORTL.ZAHLEN 0808671 10 ZBF 6,LGS:FORTL.ZAHLEN 0808749 10

ZBF 4,LGS:GERADE ZAHLEN 0810818 10 ZBF 5,LGS:GERADE ZAHLEN 0810821 10 ZBF 6,LGS:GERADE ZAHLEN 0810834 10

ZBF 4,LGS:UNGERADE ZAHLEN 0810850 10 ZBF 5,LGS:UNGERADE ZAHLEN 0810863 10 ZBF 6,LGS:UNGERADE ZAHLEN 0810876 10

ZBF 4,QR:FORTL.ZAHLEN 0808820 10 ZBF 5,QR:FORTL.ZAHLEN 0808697 10 ZBF 6,QR:FORTL.ZAHLEN 0808765 10

ZBF 4 CUS 0825023 1 ZBF 5 CUS 0825025 1 ZBF 6 CUS 0825027 1

Accessories Accessories Accessories

CMS-P1-M/ZBF 5144709 1 CMS-P1-M/ZBF 5144709 1 CMS-P1-M/ZBF 5144709 1

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 77

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Marking and labeling - MARKING system
Terminal marking
Zack marker strip terminal marking
for a flat marker groove
P R I NT E D P R I NT E D
F OR YOU F OR YOU
– The ZBF flat zack marker strip
system is a labeling solution for modular
terminal blocks and electronic modules
with tall and flat marker grooves
– Labeling service: Phoenix Contact can
custom-label all zack marker strip mark-
ers in accordance with your requirements
Notes:
1) 10 identically marked strips make up one packing unit (PU).
Markers for a terminal block width of 7.5 mm Markers for a terminal block width of 8.2 mm
2) For ordering example, see page 359.

Technical data Technical data

General data
Can be printed with: CMS-P1-PLOTTER CMS-P1-PLOTTER
Material PA PA
Inflammability class according to UL 94 V2 V2
Temperature range [°C] -40 ... 100 -40 ... 100
Wipe resistance DIN EN 61010-1 (VDE 0411-1) DIN EN 61010-1 (VDE 0411-1)
Components free from silicone and halogen free from silicone and halogen

Ordering data Ordering data

Pcs. / Pcs. /
Description Color Type Order No. Type Order No.
Pkt. Pkt.
Zack marker strip, flat, 10-section, without color print
white ZBF 7,5:UNBEDRUCKT 0809942 10 ZBF 8:UNBEDRUCKT 0808781 10
5-section white
Zack marker strip, flat, printed horizontally, 10-section,
with consecutive numbers, e.g., 1-10, 11-20, etc. up to 91-1001)

white ZBF 7,5,LGS:FORTL.ZAHLEN 0809955 10 ZBF 8,LGS:FORTL.ZAHLEN 0808804 10

Zack marker strip, flat, printed vertically, 10-section,
with consecutive numbers, e.g., 1-10, 11-20, etc. up to 91-1001)

white ZBF 7,5,QR:FORTL.ZAHLEN 0809968 10

Zack marker strip, flat, special printing, 10-section,
divisible, marking according to customer requirements,
please specify the desired marking with order2)

white ZBF 7,5 CUS 0825028 1 ZBF 8 CUS 0825030 1

5-section white

Accessories Accessories
Magazine, for CMS-P1-PLOTTER
CMS-P1-M/ZBF 5144709 1 CMS-P1-M/ZBF 5144709 1

78 PHOENIX CONTACT
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Marking and labeling - MARKING system
Terminal marking

P R I NT E D P R I NT E D P R I NT E D
F OR YOU F OR YOU F OR YOU

Markers for a terminal block width of 9 mm Markers for a terminal block width of 10.2 mm Markers for a terminal block width of 12 mm

Technical data Technical data Technical data

CMS-P1-PLOTTER CMS-P1-PLOTTER CMS-P1-PLOTTER

PA PA PA
V2 V2 V2
-40 ... 100 -40 ... 100 -40 ... 100
DIN EN 61010-1 (VDE 0411-1) DIN EN 61010-1 (VDE 0411-1) DIN EN 61010-1 (VDE 0411-1)
free from silicone and halogen free from silicone and halogen free from silicone and halogen

Ordering data Ordering data Ordering data

Pcs. / Pcs. / Pcs. /

Type Order No. Type Order No. Type Order No.
Pkt. Pkt. Pkt.

ZBF 9:UNBEDRUCKT 0829129 10 ZBF10:UNBEDRUCKT 0809997 10

ZBF 12:UNBEDRUCKT 0809735 10

ZBF10,LGS:FORTL.ZAHLEN 0810009 10

ZBF10,QR:FORTL.ZAHLEN 0810025 10

ZBF 9 CUS 0829130 1 ZBF10 CUS 0825031 1

ZBF 12 CUS 0825018 1

Accessories Accessories Accessories

CMS-P1-M/ZBF 5144709 1 CMS-P1-M/ZBF 5144709 1 CMS-P1-M/ZBF 5144709 1

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 79

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Marking and labeling - MARKING system
Terminal marking
Zack marker strip terminal marking
for a flat marker groove
P R I NT E D P R I NT E D
F OR YOU F OR YOU
– The ZBF flat zack marker strip system is a
labeling solution for modular terminal
blocks and electronic modules with tall
and flat marker grooves
– Labeling service: Phoenix Contact can
custom-label all zack marker strip mark-
ers in accordance with your requirements
Notes:
1) For ordering example, see page 359.
Markers for a terminal block width of 13 mm Markers for a terminal block width of 15 mm

Technical data Technical data

General data
Can be printed with: CMS-P1-PLOTTER CMS-P1-PLOTTER
Material PA PA
Inflammability class according to UL 94 V2 V2
Temperature range [°C] -40 ... 100 -40 ... 100
Wipe resistance DIN EN 61010-1 (VDE 0411-1) DIN EN 61010-1 (VDE 0411-1)
Components free from silicone and halogen free from silicone and halogen

Ordering data Ordering data

Pcs. / Pcs. /
Description Color Type Order No. Type Order No.
Pkt. Pkt.
Zack marker strip, flat, 5-section, without color print
white ZBF 13:UNBEDRUCKT 0829133 10 ZBF 15:UNBEDRUCKT 0811202 10
Zack marker strip, special printing, 5-section, divisible,
marking according to customer requirements, please specify
the desired marking with order1)

white ZBF 13 CUS 0829134 1 ZBF 15 CUS 0825019 1

Accessories Accessories
Magazine, for CMS-P1-PLOTTER
CMS-P1-M/ZBF 5144709 1 CMS-P1-M/ZBF 5144709 1

80 PHOENIX CONTACT
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Marking and labeling - MARKING system
Terminal marking

P R I NT E D P R I NT E D P R I NT E D
F OR YOU F OR YOU F OR YOU

Markers for a terminal block width of 16.3 mm Markers for a terminal block width of 17 mm Markers for a terminal block width of 19.7 mm

Technical data Technical data Technical data

CMS-P1-PLOTTER CMS-P1-PLOTTER CMS-P1-PLOTTER

PA PA PA
V2 V2 V2
-40 ... 100 -40 ... 100 -40 ... 100
DIN EN 61010-1 (VDE 0411-1) DIN EN 61010-1 (VDE 0411-1) DIN EN 61010-1 (VDE 0411-1)
free from silicone and halogen free from silicone and halogen free from silicone and halogen

Ordering data Ordering data Ordering data

Pcs. / Pcs. / Pcs. /

Type Order No. Type Order No. Type Order No.
Pkt. Pkt. Pkt.

ZBF 16:UNPRINTED 0827464 10 ZBF 17:UNBEDRUCKT 0815020 10 ZBF 19,7:UNBEDRUCKT 0810627 10

ZBF 16 CUS 0827465 1 ZBF 17 CUS 0825020 1 ZBF 19,7 CUS 0825021 1

Accessories Accessories Accessories

CMS-P1-M/ZBF 5144709 1 CMS-P1-M/ZBF 5144709 1 CMS-P1-M/ZBF 5144709 1

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 81

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Marking and labeling - MARKING system
Terminal marking
UniCard terminal marking for a tall Can be printed with:
marker groove
P R I NT E D
F OR YOU

1
2
1
2
UV
Thermal transfer for sheets UV LED technology
and cards

102 markers for a terminal block width of

3.5 mm

Technical data
General data
Can be printed with: THERMOMARK CARD PLUS  THERMOMARK CARD 
– The UCT-TM... UniCard labeling range BLUEMARK CLED  BLUEMARK LED
Number of individual labels 102
includes markers for products with tall Number of individual labels per strip 17
marker grooves Material PC
– The markers, which are supplied in uni- Inflammability class according to UL 94 V0
Temperature range [°C] -40 ... 120
form sheets, can be printed onto quickly, Wipe resistance DIN EN 61010-1 (VDE 0411-1)
easily, and precisely using the Components free from silicone and halogen
THERMOMARK CARD and Ordering data
BLUEMARK CLED
Pcs. /
– The multi-section marking strips are easy Description Color Type Order No.
Pkt.
to fit and can be easily separated if re- UniCard, for labeling terminal blocks with a marker groove
quired
– The sheets provide space for including white UCT-TM 3,5 0829484 10
red UCT-TM 3,5 RD 0829505 10
function texts orange UCT-TM 3,5 OG 0829506 10
– Labeling service: Phoenix Contact can yellow UCT-TM 3,5 YE 0829485 10
violet UCT-TM 3,5 VT 0829507 10
custom-label all UniCard markers in ac- blue UCT-TM 3,5 BU 0829508 10
cordance with your requirements green UCT-TM 3,5 GN 0829509 10
UniCard, for labeling terminal blocks with a marker groove,
Notes: labeled acc. to customer specifications1)
An overview of the markable terminal blocks that are available white UCT-TM 3,5 CUS 0829581 1
from Phoenix Contact can be found starting on page 112. red UCT-TM 3,5 RD CUS 0829582 1
1)
orange UCT-TM 3,5 OG CUS 0829583 1
For ordering example, see page 359.
yellow UCT-TM 3,5 YE CUS 0829584 1
violet UCT-TM 3,5 VT CUS 0829585 1
blue UCT-TM 3,5 BU CUS 0829586 1
green UCT-TM 3,5 GN CUS 0829587 1

Accessories
Magazine, for THERMOMARK CARD ...
for accommodating: UCT-TM ..., UCT1-TM ..., UCT5-TM ..., THERMOMARK CARD-UCT-MAG1 5146480 1
UCT-EM (5X10), UCT-EM (6X10)

82 PHOENIX CONTACT
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Marking and labeling - MARKING system
Terminal marking

P R I NT E D P R I NT E D P R I NT E D
F OR YOU F OR YOU F OR YOU

84 markers for a terminal block width of 72 markers for a terminal block width of 60 markers for a terminal block width of
4.2 mm 5.2 mm 6.2 mm

Technical data Technical data Technical data

THERMOMARK CARD PLUS  THERMOMARK CARD  THERMOMARK CARD PLUS  THERMOMARK CARD  THERMOMARK CARD PLUS  THERMOMARK CARD 
BLUEMARK CLED  BLUEMARK LED BLUEMARK CLED  BLUEMARK LED BLUEMARK CLED  BLUEMARK LED
84 72 60
14 12 10
PC PC PC
V0 V0 V0
-40 ... 120 -40 ... 120 -40 ... 120
DIN EN 61010-1 (VDE 0411-1) DIN EN 61010-1 (VDE 0411-1) DIN EN 61010-1 (VDE 0411-1)
free from silicone and halogen free from silicone and halogen free from silicone and halogen

Ordering data Ordering data Ordering data

Pcs. / Pcs. / Pcs. /

Type Order No. Type Order No. Type Order No.
Pkt. Pkt. Pkt.

UCT-TM 4 0828732 10 UCT-TM 5 0828734 10 UCT-TM 6 0828736 10

UCT-TM 4 RD 0829149 10 UCT-TM 5 RD 0829154 10 UCT-TM 6 RD 0829159 10
UCT-TM 4 OG 0829150 10 UCT-TM 5 OG 0829155 10 UCT-TM 6 OG 0829160 10
UCT-TM 4 YE 0828733 10 UCT-TM 5 YE 0828735 10 UCT-TM 6 YE 0828737 10
UCT-TM 4 VT 0829151 10 UCT-TM 5 VT 0829156 10 UCT-TM 6 VT 0829161 10
UCT-TM 4 BU 0829152 10 UCT-TM 5 BU 0829157 10 UCT-TM 6 BU 0829162 10
UCT-TM 4 GN 0829153 10 UCT-TM 5 GN 0829158 10 UCT-TM 6 GN 0829163 10

UCT-TM 4 CUS 0829588 1 UCT-TM 5 CUS 0829595 1 UCT-TM 6 CUS 0829602 1

UCT-TM 4 RD CUS 0829589 1 UCT-TM 5 RD CUS 0829596 1 UCT-TM 6 RD CUS 0829603 1
UCT-TM 4 OG CUS 0829590 1 UCT-TM 5 OG CUS 0829597 1 UCT-TM 6 OG CUS 0829604 1
UCT-TM 4 YE CUS 0829591 1 UCT-TM 5 YE CUS 0829598 1 UCT-TM 6 YE CUS 0829605 1
UCT-TM 4 VT CUS 0829592 1 UCT-TM 5 VT CUS 0829599 1 UCT-TM 6 VT CUS 0829606 1
UCT-TM 4 BU CUS 0829593 1 UCT-TM 5 BU CUS 0829600 1 UCT-TM 6 BU CUS 0829607 1
UCT-TM 4 GN CUS 0829594 1 UCT-TM 5 GN CUS 0829601 1 UCT-TM 6 GN CUS 0829608 1

Accessories Accessories Accessories

THERMOMARK CARD-UCT-MAG1 5146480 1 THERMOMARK CARD-UCT-MAG1 5146480 1 THERMOMARK CARD-UCT-MAG1 5146480 1

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 83

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Marking and labeling - MARKING system
Terminal marking
UniCard terminal marking for a tall
marker groove
P R I NT E D P R I NT E D
F OR YOU F OR YOU
– The UCT-TM... UniCard labeling range
includes markers for products with tall
marker grooves
– Labeling service: Phoenix Contact can
custom-label all UniCard markers in
accordance with your requirements
Notes:
1) For ordering example, see page 359.

48 markers for a terminal block width of 42 markers for a terminal block width of
7.62 mm 8.2 mm

Technical data Technical data

General data
Can be printed with: THERMOMARK CARD PLUS  THERMOMARK CARD  BLUE- THERMOMARK CARD PLUS  THERMOMARK CARD 
MARK CLED  BLUEMARK LED BLUEMARK CLED  BLUEMARK LED
Number of individual labels 48 42
Number of individual labels per strip 8 7
Material PC PC
Inflammability class according to UL 94 V0 V0
Temperature range [°C] -40 ... 120 -40 ... 120
Wipe resistance DIN EN 61010-1 (VDE 0411-1) DIN EN 61010-1 (VDE 0411-1)
Components free from silicone and halogen free from silicone and halogen

Ordering data Ordering data

Pcs. / Pcs. /
Description Color Type Order No. Type Order No.
Pkt. Pkt.
UniCard, for labeling terminal blocks with a marker groove

white UCT-TM 7,62 0828738 10 UCT-TM 8 0828740 10

red UCT-TM 7,62 RD 0829510 10 UCT-TM 8 RD 0829164 10
orange UCT-TM 7,62 OG 0829511 10 UCT-TM 8 OG 0829165 10
yellow UCT-TM 7,62 YE 0828739 10 UCT-TM 8 YE 0828741 10
violet UCT-TM 7,62 VT 0829512 10 UCT-TM 8 VT 0829166 10
blue UCT-TM 7,62 BU 0829513 10 UCT-TM 8 BU 0829167 10
green UCT-TM 7,62 GN 0829514 10 UCT-TM 8 GN 0829168 10
UniCard, for labeling terminal blocks with a marker groove,
labeled acc. to customer specifications1)
white UCT-TM 7,62 CUS 0829609 1 UCT-TM 8 CUS 0829616 1
red UCT-TM 7,62 RD CUS 0829610 1 UCT-TM 8 RD CUS 0829617 1
orange UCT-TM 7,62 OG CUS 0829611 1 UCT-TM 8 OG CUS 0829618 1
yellow UCT-TM 7,62 YE CUS 0829612 1 UCT-TM 8 YE CUS 0829619 1
violet UCT-TM 7,62 VT CUS 0829613 1 UCT-TM 8 VT CUS 0829620 1
blue UCT-TM 7,62 BU CUS 0829614 1 UCT-TM 8 BU CUS 0829621 1
green UCT-TM 7,62 GN CUS 0829615 1 UCT-TM 8 GN CUS 0829622 1

Accessories Accessories
Magazine, for THERMOMARK CARD ...
for accommodating: UCT-TM ..., UCT1-TM ..., UCT5-TM ..., THERMOMARK CARD-UCT-MAG1 5146480 1 THERMOMARK CARD-UCT-MAG1 5146480 1
UCT-EM (5X10), UCT-EM (6X10)

84 PHOENIX CONTACT
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Marking and labeling - MARKING system
Terminal marking

P R I NT E D P R I NT E D P R I NT E D
F OR YOU F OR YOU F OR YOU

36 markers for a terminal block width of 30 markers for a terminal block width of 12 mm 18 markers for a terminal block width of 16 mm
10.2 mm

Technical data Technical data Technical data

THERMOMARK CARD PLUS  THERMOMARK CARD  THERMOMARK CARD PLUS  THERMOMARK CARD  THERMOMARK CARD PLUS  THERMOMARK CARD 
BLUEMARK CLED  BLUEMARK LED BLUEMARK CLED  BLUEMARK LED BLUEMARK CLED  BLUEMARK LED
36 30 18
6 5 3
PC PC PC
V0 V0 V0
-40 ... 120 -40 ... 120 -40 ... 120
DIN EN 61010-1 (VDE 0411-1) DIN EN 61010-1 (VDE 0411-1) DIN EN 61010-1 (VDE 0411-1)
free from silicone and halogen free from silicone and halogen free from silicone and halogen

Ordering data Ordering data Ordering data

Pcs. / Pcs. / Pcs. /

Type Order No. Type Order No. Type Order No.
Pkt. Pkt. Pkt.

UCT-TM 10 0829142 10 UCT-TM 12 0829144 10 UCT-TM 16 0829146 10

UCT-TM 10 RD 0829169 10 UCT-TM 12 RD 0829174 10 UCT-TM 16 RD 0829179 10
UCT-TM 10 OG 0829170 10 UCT-TM 12 OG 0829175 10 UCT-TM 16 OG 0829180 10
UCT-TM 10 YE 0829143 10 UCT-TM 12 YE 0829145 10 UCT-TM 16 YE 0829147 10
UCT-TM 10 VT 0829171 10 UCT-TM 12 VT 0829176 10 UCT-TM 16 VT 0829181 10
UCT-TM 10 BU 0829172 10 UCT-TM 12 BU 0829177 10 UCT-TM 16 BU 0829182 10
UCT-TM 10 GN 0829173 10 UCT-TM 12 GN 0829178 10 UCT-TM 16 GN 0829183 10

UCT-TM 10 CUS 0829623 1 UCT-TM 12 CUS 0829630 1 UCT-TM 16 CUS 0829637 1

UCT-TM 10 RD CUS 0829624 1 UCT-TM 12 RD CUS 0829631 1 UCT-TM 16 RD CUS 0829638 1
UCT-TM 10 OG CUS 0829625 1 UCT-TM 12 OG CUS 0829632 1 UCT-TM 16 OG CUS 0829639 1
UCT-TM 10 YE CUS 0829626 1 UCT-TM 12 YE CUS 0829633 1 UCT-TM 16 YE CUS 0829640 1
UCT-TM 10 VT CUS 0829627 1 UCT-TM 12 VT CUS 0829634 1 UCT-TM 16 VT CUS 0829641 1
UCT-TM 10 BU CUS 0829628 1 UCT-TM 12 BU CUS 0829635 1 UCT-TM 16 BU CUS 0829642 1
UCT-TM 10 GN CUS 0829629 1 UCT-TM 12 GN CUS 0829636 1 UCT-TM 16 GN CUS 0829643 1

Accessories Accessories Accessories

THERMOMARK CARD-UCT-MAG1 5146480 1 THERMOMARK CARD-UCT-MAG1 5146480 1 THERMOMARK CARD-UCT-MAG1 5146480 1

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 85

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Marking and labeling - MARKING system
Terminal marking
UniCard terminal marking for a Can be printed with:
flat marker groove
P R I NT E D
F OR YOU

1
2
1
2
UV
Thermal transfer for sheets UV LED technology
and cards

108 markers for a terminal block width of

3.5 mm

Technical data
General data
Can be printed with: THERMOMARK CARD PLUS  THERMOMARK CARD 
– The UCT-TMF ... UniCard labeling range BLUEMARK CLED  BLUEMARK LED
Number of individual labels 108
includes markers for products with flat Number of individual labels per strip 18
marker grooves Material PC
– The markers, which are supplied in uni- Inflammability class according to UL 94 V0
Temperature range [°C] -40 ... 120
form sheets, can be printed onto quickly, Wipe resistance DIN EN 61010-1 (VDE 0411-1)
easily, and precisely using the Components free from silicone and halogen
THERMOMARK CARD and Ordering data
BLUEMARK CLED
Pcs. /
– The multi-section marking strips are easy Description Color Type Order No.
Pkt.
to fit and can be easily separated if re- UniCard, for labeling terminal blocks with a flat marker groove
quired
– The sheets provide space for including white UCT-TMF 3,5 0829486 10
red UCT-TMF 3,5 RD 0829515 10
function texts orange UCT-TMF 3,5 OG 0829516 10
– Labeling service: Phoenix Contact can yellow UCT-TMF 3,5 YE 0829487 10
violet UCT-TMF 3,5 VT 0829517 10
custom-label all UniCard markers in ac- blue UCT-TMF 3,5 BU 0829518 10
cordance with your requirements green UCT-TMF 3,5 GN 0829519 10
UniCard, for labeling terminal blocks with a flat marker groove,
Notes: labeled acc. to customer specifications1)
An overview of the markable terminal blocks that are available white UCT-TMF 3,5 CUS 0829644 1
from Phoenix Contact can be found starting on page 112. red UCT-TMF 3,5 RD CUS 0829645 1
1)
orange UCT-TMF 3,5 OG CUS 0829646 1
For ordering example, see page 359.
yellow UCT-TMF 3,5 YE CUS 0829647 1
violet UCT-TMF 3,5 VT CUS 0829648 1
blue UCT-TMF 3,5 BU CUS 0829649 1
green UCT-TMF 3,5 GN CUS 0829650 1

Accessories
Magazine, for THERMOMARK CARD ..., for accommodating:
UCT-TMF ...
THERMOMARK CARD-UCT-MAG2 5146563 1

86 PHOENIX CONTACT
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Marking and labeling - MARKING system
Terminal marking

P R I NT E D P R I NT E D P R I NT E D
F OR YOU F OR YOU F OR YOU

90 markers for a terminal block width of 72 markers for a terminal block width of 60 markers for a terminal block width of
4.2 mm 5.2 mm 6.2 mm

Technical data Technical data Technical data

THERMOMARK CARD PLUS  THERMOMARK CARD  THERMOMARK CARD PLUS  THERMOMARK CARD  THERMOMARK CARD PLUS  THERMOMARK CARD 
BLUEMARK CLED  BLUEMARK LED BLUEMARK CLED  BLUEMARK LED BLUEMARK CLED  BLUEMARK LED
90 72 60
15 12 10
PC PC PC
V0 V0 V0
-40 ... 120 -40 ... 120 -40 ... 120
DIN EN 61010-1 (VDE 0411-1) DIN EN 61010-1 (VDE 0411-1) DIN EN 61010-1 (VDE 0411-1)
free from silicone and halogen free from silicone and halogen free from silicone and halogen

Ordering data Ordering data Ordering data

Pcs. / Pcs. / Pcs. /

Type Order No. Type Order No. Type Order No.
Pkt. Pkt. Pkt.

UCT-TMF 4 0828742 10 UCT-TMF 5 0828744 10 UCT-TMF 6 0828746 10

UCT-TMF 4 RD 0829184 10 UCT-TMF 5 RD 0829189 10 UCT-TMF 6 RD 0829194 10
UCT-TMF 4 OG 0829185 10 UCT-TMF 5 OG 0829190 10 UCT-TMF 6 OG 0829195 10
UCT-TMF 4 YE 0828743 10 UCT-TMF 5 YE 0828745 10 UCT-TMF 6 YE 0828747 10
UCT-TMF 4 VT 0829186 10 UCT-TMF 5 VT 0829191 10 UCT-TMF 6 VT 0829196 10
UCT-TMF 4 BU 0829187 10 UCT-TMF 5 BU 0829192 10 UCT-TMF 6 BU 0829197 10
UCT-TMF 4 GN 0829188 10 UCT-TMF 5 GN 0829193 10 UCT-TMF 6 GN 0829198 10

UCT-TMF 4 CUS 0829651 1 UCT-TMF 5 CUS 0829658 1 UCT-TMF 6 CUS 0829665 1

UCT-TMF 4 RD CUS 0829652 1 UCT-TMF 5 RD CUS 0829659 1 UCT-TMF 6 RD CUS 0829666 1
UCT-TMF 4 OG CUS 0829653 1 UCT-TMF 5 OG CUS 0829660 1 UCT-TMF 6 OG CUS 0829667 1
UCT-TMF 4 YE CUS 0829654 1 UCT-TMF 5 YE CUS 0829661 1 UCT-TMF 6 YE CUS 0829668 1
UCT-TMF 4 VT CUS 0829655 1 UCT-TMF 5 VT CUS 0829662 1 UCT-TMF 6 VT CUS 0829669 1
UCT-TMF 4 BU CUS 0829656 1 UCT-TMF 5 BU CUS 0829663 1 UCT-TMF 6 BU CUS 0829670 1
UCT-TMF 4 GN CUS 0829657 1 UCT-TMF 5 GN CUS 0829664 1 UCT-TMF 6 GN CUS 0829671 1

Accessories Accessories Accessories

THERMOMARK CARD-UCT-MAG2 5146563 1 THERMOMARK CARD-UCT-MAG2 5146563 1 THERMOMARK CARD-UCT-MAG2 5146563 1

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 87

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Marking and labeling - MARKING system
Terminal marking
UniCard terminal marking for a flat Can be printed with:
marker groove
P R I NT E D
F OR YOU
– The UCT-TMF ... UniCard labeling range
includes markers for products with flat

1
2
marker grooves

1
2
– Labeling service: Phoenix Contact can UV
custom-label all UniCard markers in Thermal transfer for sheets UV LED technology
accordance with your requirements and cards

Notes:
1) For ordering example, see page 359.

42 markers for a terminal block width of

8.2 mm

Technical data
General data
Can be printed with: THERMOMARK CARD PLUS  THERMOMARK CARD 
BLUEMARK CLED  BLUEMARK LED
Number of individual labels 42
Number of individual labels per strip 7
Material PC
Inflammability class according to UL 94 V0
Temperature range [°C] -40 ... 120
Wipe resistance DIN EN 61010-1 (VDE 0411-1)
Components free from silicone and halogen

Ordering data

Pcs. /
Description Color Type Order No.
Pkt.
UniCard, for labeling terminal blocks with a flat marker groove

white UCT-TMF 8 0828748 10

red UCT-TMF 8 RD 0829199 10
orange UCT-TMF 8 OG 0829200 10
yellow UCT-TMF 8 YE 0828749 10
violet UCT-TMF 8 VT 0829201 10
blue UCT-TMF 8 BU 0829202 10
green UCT-TMF 8 GN 0829203 10
UniCard, for labeling terminal blocks with a flat marker groove,
labeled acc. to customer specifications1)
white UCT-TMF 8 CUS 0829672 1
red UCT-TMF 8 RD CUS 0829673 1
orange UCT-TMF 8 OG CUS 0829674 1
yellow UCT-TMF 8 YE CUS 0829675 1
violet UCT-TMF 8 VT CUS 0829676 1
blue UCT-TMF 8 BU CUS 0829677 1
green UCT-TMF 8 GN CUS 0829678 1

Accessories
Magazine, for THERMOMARK CARD ..., for accommodating:
UCT-TMF ...
THERMOMARK CARD-UCT-MAG2 5146563 1

88 PHOENIX CONTACT
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Marking and labeling - MARKING system
Terminal marking

P R I NT E D P R I NT E D P R I NT E D
F OR YOU F OR YOU F OR YOU

36 markers for a terminal block width of 30 markers for a terminal block width of 12 mm 24 markers for a terminal block width of 16 mm
10.2 mm

Technical data Technical data Technical data

THERMOMARK CARD PLUS  THERMOMARK CARD  THERMOMARK CARD PLUS  THERMOMARK CARD  THERMOMARK CARD PLUS  THERMOMARK CARD 
BLUEMARK CLED  BLUEMARK LED BLUEMARK CLED  BLUEMARK LED BLUEMARK CLED  BLUEMARK LED
36 30 24
6 5 4
PC PC PC
V0 V0 V0
-40 ... 120 -40 ... 120 -40 ... 120
DIN EN 61010-1 (VDE 0411-1) DIN EN 61010-1 (VDE 0411-1) DIN EN 61010-1 (VDE 0411-1)
free from silicone and halogen free from silicone and halogen free from silicone and halogen

Ordering data Ordering data Ordering data

Pcs. / Pcs. / Pcs. /

Type Order No. Type Order No. Type Order No.
Pkt. Pkt. Pkt.

UCT-TMF 10 0829204 10 UCT-TMF 12 0829214 10 UCT-TMF 16 0829218 10

UCT-TMF 10 RD 0829205 10 UCT-TMF 12 RD 0829212 10 UCT-TMF 16 RD 0829219 10
UCT-TMF 10 OG 0829206 10 UCT-TMF 12 OG 0829213 10 UCT-TMF 16 OG 0829220 10
UCT-TMF 10 YE 0829207 10 UCT-TMF 12 YE 0829211 10 UCT-TMF 16 YE 0829221 10
UCT-TMF 10 VT 0829208 10 UCT-TMF 12 VT 0829215 10
UCT-TMF 10 BU 0829209 10 UCT-TMF 12 BU 0829216 10 UCT-TMF 16 BU 0829223 10
UCT-TMF 10 GN 0829210 10 UCT-TMF 12 GN 0829217 10 UCT-TMF 16 GN 0829224 10

UCT-TMF 10 CUS 0829679 1 UCT-TMF 12 CUS 0829686 1 UCT-TMF 16 CUS 0829693 1

UCT-TMF 10 RD CUS 0829680 1 UCT-TMF 12 RD CUS 0829687 1 UCT-TMF 16 RD CUS 0829694 1
UCT-TMF 10 OG CUS 0829681 1 UCT-TMF 12 OG CUS 0829688 1 UCT-TMF 16 OG CUS 0829695 1
UCT-TMF 10 YE CUS 0829682 1 UCT-TMF 12 YE CUS 0829689 1 UCT-TMF 16 YE CUS 0829696 1
UCT-TMF 10 VT CUS 0829683 1 UCT-TMF 12 VT CUS 0829690 1 UCT-TMF 16 VT CUS 0829697 1
UCT-TMF 10 BU CUS 0829684 1 UCT-TMF 12 BU CUS 0829691 1 UCT-TMF 16 BU CUS 0829698 1
UCT-TMF 10 GN CUS 0829685 1 UCT-TMF 12 GN CUS 0829692 1 UCT-TMF 16 GN CUS 0829699 1

Accessories Accessories Accessories

THERMOMARK CARD-UCT-MAG2 5146563 1 THERMOMARK CARD-UCT-MAG2 5146563 1 THERMOMARK CARD-UCT-MAG2 5146563 1

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 89

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Marking and labeling - MARKING system
Terminal marking
UniSheet terminal marking for a Can be printed with:
universal marker groove
P R I NT E D
F OR YOU

1
2
1
2
Thermal transfer for sheets
and cards

13 strips with a strip width of 104 mm

Technical data
General data
Can be printed with: THERMOMARK CARD PLUS  THERMOMARK CARD
– The US-TM 100 UniSheet markers are Material PVC
suitable for products with universal mark- Inflammability class according to UL 94 V0
Temperature range [°C] -30 ... 80
er grooves Wipe resistance DIN EN 61010-1 (VDE 0411-1)
– The markers, which are supplied as uni- Components Silicone-free
form cards, can be printed onto quickly, Ordering data
easily, and precisely using the
Pcs. /
THERMOMARK CARD Description Color Type Order No.
Pkt.
– The perforated marking strips are easy to UniSheet, for marking push-in terminal blocks with a special center
separate and can be easily fitted groove
white US-TM 100 0829255 10
– The cards provide space for including UniSheet, for labeling push-in terminal blocks with a special center
function texts groove, labeled acc. to customer specifications1)
– Labeling service: Phoenix Contact can white US-TM 100 CUS 0829948 1
custom-label all UniSheet markers in ac-
Accessories
cordance with your requirements
Magazine, for THERMOMARK CARD..., for accommodating all
Notes: US-... materials
THERMOMARK CARD-US-MAG1 5146451 1
An overview of the markable terminal blocks that are available
from Phoenix Contact can be found starting on page 112.
1) For ordering example, see page 359.

90 PHOENIX CONTACT
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Marking and labeling - MARKING system
Terminal marking
UniSheet terminal marking for a Can be printed with:
flat marker groove
P R I NT E D
F OR YOU

1
2
1
2
Thermal transfer for sheets
and cards

20 strips with a strip width of 104 mm

Technical data
General data
Can be printed with: THERMOMARK CARD PLUS  THERMOMARK CARD
– The US-TMF 100 UniSheet markers are Material PVC
suitable for products with a flat marker Inflammability class according to UL 94 V0
Temperature range [°C] -30 ... 80
groove Wipe resistance DIN EN 61010-1 (VDE 0411-1)
– The markers, which are supplied as uni- Components Silicone-free
form cards, can be printed onto quickly, Ordering data
easily, and precisely using the
Pcs. /
THERMOMARK CARD Description Color Type Order No.
Pkt.
– The perforated marking strips are easy to UniSheet, for labeling terminal blocks with a tall, flat or universal
separate and can be easily fitted marker groove
white US-TMF 100 0829260 10
– The cards provide space for including UniSheet, for labeling terminal blocks with a flat marker groove,
function texts labeled acc. to customer specifications1)
– Labeling service: Phoenix Contact can white US-TMF 100 CUS 0829949 1

custom-label all UniSheet markers in Accessories

accordance with your requirements Magazine, for THERMOMARK CARD..., for accommodating all
US-... materials
Notes: THERMOMARK CARD-US-MAG1 5146451 1
An overview of the markable terminal blocks that are available
from Phoenix Contact can be found starting on page 112.
1) For ordering example, see page 359.

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 91

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Marking and labeling - MARKING system
Terminal marking
UniSheet marker strips, self-adhesive, Can be printed with:
for terminal blocks without marker
groove

1
2
1
2
Thermal transfer for sheets
and cards

26 strips, 104 mm wide, 2.8 mm high

Technical data
General data
Can be printed with: THERMOMARK CARD PLUS  THERMOMARK CARD
– The US-TML labeling range includes self- Number of individual labels 26
adhesive marker strips for products with- Number of individual labels per strip 1
Material Polyester
out a marker groove Temperature range [°C] -40 ... 150
– The markers, which are supplied as uni- Wipe resistance DIN EN 61010-1 (VDE 0411-1)
Components free from silicone and halogen
form cards, can be printed onto quickly,
easily, and precisely using the Ordering data
THERMOMARK CARD Pcs. /
Description Color Type Order No.
– The perforated marking strips are easy to Pkt.
separate and can be easily fitted UniSheet,unprinted, for labeling terminal blocks without marker
groove
– The cards provide space for including Lettering field size: 104 x 2.8 mm white US-TML (104X2,8) 0830767 10
function texts
Lettering field size: 104 x 3.8 mm white

Lettering field size: 104 x 5 mm white

Lettering field size: 104 x 10 mm white

Accessories
Magazine, for THERMOMARK CARD..., for accommodating all
US-... materials
THERMOMARK CARD-US-MAG1 5146451 1

92 PHOENIX CONTACT
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Marking and labeling - MARKING system
Terminal marking

22 strips, 104 mm wide, 3.8 mm high 19 strips, 104 mm wide, 5 mm high 11 strips, 104 mm wide, 10 mm high

Technical data Technical data Technical data

THERMOMARK CARD PLUS  THERMOMARK CARD THERMOMARK CARD PLUS  THERMOMARK CARD THERMOMARK CARD PLUS  THERMOMARK CARD
22 19 11
1 1 1
Polyester Polyester Polyester
-40 ... 150 -40 ... 150 -40 ... 150
DIN EN 61010-1 (VDE 0411-1) DIN EN 61010-1 (VDE 0411-1) DIN EN 61010-1 (VDE 0411-1)
free from silicone and halogen free from silicone and halogen free from silicone and halogen

Ordering data Ordering data Ordering data

Pcs. / Pcs. / Pcs. /

Type Order No. Type Order No. Type Order No.
Pkt. Pkt. Pkt.

US-TML (104X3,8) 0830768 10

US-TML (104X5) 0830769 10

US-TML (104X10) 0830770 10

Accessories Accessories Accessories

THERMOMARK CARD-US-MAG1 5146451 1 THERMOMARK CARD-US-MAG1 5146451 1 THERMOMARK CARD-US-MAG1 5146451 1

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 93

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Marking and labeling - MARKING system
Terminal marking
Marker strips for terminal marking, Can be printed with:
for tall and flat marker grooves
P R I NT E D
F OR YOU

2
11
2
Thermal transfer for rolls

Markers for a terminal block width of 4.2 mm

Technical data
General data
Can be printed with: THERMOMARK ROLL  THERMOMARK ROLL X1  THERMO-
– The TMT labeling range includes markers MARK X1.1  THERMOMARK X1.2  THERMOMARK S1.1
Number of individual labels 24000
for all products with tall and flat marker Number of individual labels per strip 24
grooves Material Polyester
– The markers that are supplied on rolls can Temperature range [°C] -40 ... 120
Wipe resistance DIN EN 61010-1 (VDE 0411-1)
be quickly and cost-effectively labeled us- Components free from silicone and halogen
ing THERMOMARK printers
Ordering data
– The perforated marking strips are easy to
separate and can be easily fitted using the Description Color Type Order No.
Pcs. /
Pkt.
tool supplied
Markers, perforated, unprinted, for all terminal blocks with a tall,
– Labeling service: Phoenix Contact can flat or universal marker groove, 1 roll = 1000 strips, strip height:
custom-label all TMT markers in accor- 6.4 mm, incl. TMT TOOL
dance with your requirements white TMT 4R 0816375 1
red TMT 4 R RD 0816362 1
Notes:
blue TMT 4 R BU 0816333 1
An overview of the markable terminal blocks that are available yellow TMT 4 R YE 0816388 1
from Phoenix Contact can be found starting on page 112. green TMT 4 R GN 0816346 1
1) For ordering example, see page 359. orange TMT 4 R OG 0816359 1
Markers, perforated, labeled acc. to customer specifications,
for all terminal blocks with a tall, flat or universal marker groove1)

white TMT 4 R CUS 0824476 1

red TMT 4 R RD CUS 0824480 1
blue TMT 4 R BU CUS 0824477 1
yellow TMT 4 R YE CUS 0824481 1
green TMT 4 R GN CUS 0824478 1
orange TMT 4 R OG CUS 0824479 1

Accessories
Locking tool to snap into the TMT... materials

orange TMT TOOL 0816650 1

94 PHOENIX CONTACT
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Marking and labeling - MARKING system
Terminal marking

P R I NT E D P R I NT E D P R I NT E D
F OR YOU F OR YOU F OR YOU

Marker for a terminal block width of 5.2 mm Marker for a terminal block width of 6.2 mm Marker for a terminal block width of 8.2 mm

Technical data Technical data Technical data

THERMOMARK ROLL  THERMOMARK ROLL X1  THERMO- THERMOMARK ROLL  THERMOMARK ROLL X1  THERMO- THERMOMARK ROLL  THERMOMARK ROLL X1  THERMO-
MARK X1.1  THERMOMARK X1.2  THERMOMARK S1.1 MARK X1.1  THERMOMARK X1.2  THERMOMARK S1.1 MARK X1.1  THERMOMARK X1.2  THERMOMARK S1.1
19000 16000 12000
19 16 12
Polyester Polyester Polyester
-40 ... 120 -40 ... 120 -40 ... 120
DIN EN 61010-1 (VDE 0411-1) DIN EN 61010-1 (VDE 0411-1) DIN EN 61010-1 (VDE 0411-1)
free from silicone and halogen free from silicone and halogen free from silicone and halogen

Ordering data Ordering data Ordering data

Pcs. / Pcs. / Pcs. /

Type Order No. Type Order No. Type Order No.
Pkt. Pkt. Pkt.

TMT 5R 0816430 1 TMT 6R 0816498 1 TMT 8R 0816553 1

TMT 5 R RD 0816427 1 TMT 6 R RD 0816485 1 TMT 8 R RD 0816540 1
TMT 5 R BU 0816391 1 TMT 6 R BU 0816456 1 TMT 8 R BU 0816511 1
TMT 5 R YE 0816443 1 TMT 6 R YE 0816508 1 TMT 8 R YE 0816566 1
TMT 5 R GN 0816401 1 TMT 6 R GN 0816469 1 TMT 8 R GN 0816524 1
TMT 5 R OG 0816414 1 TMT 6 R OG 0816472 1 TMT 8 R OG 0816537 1

TMT 5 R CUS 0824482 1 TMT 6 R CUS 0824488 1 TMT 8 R CUS 0824494 1

TMT 5 R RD CUS 0824486 1 TMT 6 R RD CUS 0824492 1 TMT 8 R RD CUS 0824498 1
TMT 5 R BU CUS 0824483 1 TMT 6 R BU CUS 0824489 1 TMT 8 R BU CUS 0824495 1
TMT 5 R YE CUS 0824487 1 TMT 6 R YE CUS 0824493 1 TMT 8 R YE CUS 0824499 1
TMT 5 R GN CUS 0824484 1 TMT 6 R GN CUS 0824490 1 TMT 8 R GN CUS 0824496 1
TMT 5 R OG CUS 0824485 1 TMT 6 R OG CUS 0824491 1 TMT 8 R OG CUS 0824497 1

Accessories Accessories Accessories

TMT TOOL 0816650 1 TMT TOOL 0816650 1 TMT TOOL 0816650 1

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 95

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Marking and labeling - MARKING system
Terminal marking
Marker strips for terminal marking, Can be printed with:
for tall and flat marker grooves
P R I NT E D
F OR YOU

2
11
2
Thermal transfer for rolls

Markers for a terminal block width of 10.2 mm

Technical data
General data
Can be printed with: THERMOMARK ROLL  THERMOMARK ROLL X1  THERMO-
– The TMT labeling range includes markers MARK X1.1  THERMOMARK X1.2  THERMOMARK S1.1
Number of individual labels 10000
for all products with tall and flat marker Number of individual labels per strip 10
grooves Material Polyester
– Labeling service: Phoenix Contact can Temperature range [°C] -40 ... 120
Wipe resistance DIN EN 61010-1 (VDE 0411-1)
custom-label all TMT markers in Components free from silicone and halogen
accordance with your requirements
Ordering data
Notes:
Pcs. /
1) For ordering example, see page 359. Description Color Type Order No.
Pkt.
Markers, perforated, unprinted, for all terminal blocks with a tall,
flat or universal marker groove, 1 roll = 1000 strips, strip height:
6.4 mm, incl. TMT TOOL

white TMT 10 R 0816210 1

Markers, perforated, labeled acc. to customer specifications,
for all terminal blocks with a tall, flat or universal marker groove1)

white TMT 10 R CUS 0824500 1

Marker, for terminal blocks, unperforated, unprinted, strip width:
101.5 mm, 1 roll = 1000 strips, incl. TMT TOOL

white
red
blue
yellow
green
orange
Marker, for terminal blocks, unperforated, labeled as per cus-
tomer specifications, strip width: 101.5 mm1)
white
red
blue
yellow
green
orange

Accessories
Locking tool to snap into the TMT... materials

orange TMT TOOL 0816650 1

96 PHOENIX CONTACT
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Marking and labeling - MARKING system
Terminal marking

P R I NT E D
F OR YOU

Markers with a strip width of 101.5 mm

Technical data

THERMOMARK ROLL  THERMOMARK ROLL X1  THERMO-

MARK X1.1  THERMOMARK X1.2  THERMOMARK S1.1
1000
1
Polyester
-40 ... 120
DIN EN 61010-1 (VDE 0411-1)
free from silicone and halogen

Ordering data

Pcs. /
Type Order No.
Pkt.

TMT 100 R 0816605 1

TMT 100 R RD 0816595 1
TMT 100 R BU 0816223 1
TMT 100 R YE 0816618 1
TMT 100 R GN 0816579 1
TMT 100 R OG 0816582 1

TMT 100 R CUS 0824501 1

TMT 100 R RD CUS 0824505 1
TMT 100 R BU CUS 0824502 1
TMT 100 R YE CUS 0824506 1
TMT 100 R GN CUS 0824503 1
TMT 100 R OG CUS 0824504 1

Accessories

TMT TOOL 0816650 1

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 97

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Marking and labeling - MARKING system
Terminal marking
Self-adhesive marker strips Can be printed with:
P R I NT E D
F OR YOU

2
11
2
Thermal transfer for rolls

Marker with strip width of 101.5 mm

Technical data
General data
Can be printed with: THERMOMARK ROLL  THERMOMARK ROLL X1  THERMO-
– The products in the TML labeling range MARK X1.1  THERMOMARK X1.2  THERMOMARK S1.1
Number of individual labels per strip 1
allow subsequent labeling of zack marker Material Polyester
strip materials and flat zack marker strip Temperature range [°C] -40 ... 150
materials using a marking foil Wipe resistance DIN EN 61010-1 (VDE 0411-1)
Components Silicone-free
– The markers that are supplied on rolls can
be quickly and cost-effectively labeled Ordering data
using THERMOMARK printers Pcs. /
Description Color Type Order No.
– Labeling service: Phoenix Contact can Pkt.

custom-label all TML markers in accor- Marking foil for zack marker strip, unprinted, perforated,
1 roll = 1000 strips, strip length: 101 mm, strip height: 9.5 mm
dance with your requirements
transparent TML (101X9,5)R TR 0816647 1
Notes: labeled according to customer specifications1) transparent TML (101X9,5)R TR CUS 0824473 1
An overview of the markable terminal blocks that are available Marking foil for zack marker strip, flat, unprinted,
from Phoenix Contact can be found starting on page 112. perforated, 1 roll = 1000 strips, strip length: 101 mm,
1)
strip height: 4.2 mm
For ordering example, see page 359.
transparent TML (101X4,2)R TR 0816621 1
labeled according to customer specifications1) transparent TML (101X4,2)R TR CUS 0824472 1

98 PHOENIX CONTACT
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Marking and labeling - MARKING system
Terminal marking
Self-adhesive marker strips Can be printed with:
P R I NT E D
F OR YOU

2
1
1
2
Thermal transfer for rolls

Marker with strip height of 9.5 mm and 4.2 mm,

continuous

Technical data
General data
Can be printed with: THERMOMARK ROLL  THERMOMARK ROLL X1  THERMO-
– The products in the TML labeling range al- MARK X1.1  THERMOMARK X1.2  THERMOMARK S1.1
Number of individual labels per strip 1
low subsequent labeling of zack marker Material Polyester
strip materials and flat zack marker strip Temperature range [°C] -40 ... 150
materials using a marking foil Wipe resistance DIN EN 61010-1 (VDE 0411-1)
Components Silicone-free
– The markers that are supplied on rolls can
be quickly and cost-effectively labeled Ordering data
using THERMOMARK printers Pcs. /
Description Color Type Order No.
– Labeling service: Phoenix Contact can Pkt.

custom-label all TML markers in accor- Marking foil for zack marker strip, unprinted,
1 roll = 40 m continuous, strip height: 9.5 mm
dance with your requirements transparent TML (EX9,5)R TR 0816634 1
labeled according to customer specifications1) transparent TML (EX9,5)R TR CUS 0824475 1
Notes:
Marking foil for zack marker strip, flat, unprinted,
1) For ordering example, see page 359. 1 roll = 40 m continuous, strip height: 4.2 mm

transparent TML (EX4,2)R TR 0816715 1

labeled according to customer specifications1) transparent TML (EX4,2)R TR CUS 0824474 1

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 99

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Marking and labeling - MARKING system
Terminal marking
Self-adhesive marker strips for termi-
nal blocks without a marker groove
P R I NT E D
F OR YOU

Markers labeled with 2.54 mm pitch

Technical data
General data
Material Polyester
– The SK range of self-adhesive labels can Temperature range [°C] -40 ... 150
be used to label products that do not fea- Wipe resistance DIN EN 61010-1 (VDE 0411-1)
Components free from silicone and halogen
ture a marker groove
– The markers that are supplied on rolls can Ordering data
be quickly and cost-effectively labeled us- Description Color Type Order No.
Pcs. /
ing THERMOMARK printers Pkt.

– The markers that are supplied as cards Marker card, printed horizontally, self-adhesive, 10-section
marking stripes, 14 identical decades marked with 1-10, 11-20, etc.
can be easily labeled using standard laser up to 91-100, adequate for 140 terminal blocks (SK 2,54...-SK
printers 3,81...max. 2 characters per terminal block)

– Ideal for labeling COMBICON connectors white SK 2,54/2,8:FORTL.ZAHLEN 0804853 10

– Labeling service: Phoenix Contact can Marker card, self-adhesive, marked according to customer
specifications, 14-section marker strips, max. 25-pos. marking
custom-label SK markers in accordance (SK...P2,54 to SK...P3,81 max. 2 characters per pos.)1)
with your requirements
white SK 2,8 REEL P2,54 WH CUS 0825120 1
Notes: Marker card, unprinted, DIN A4 format, pitch as desired, self-
adhesive, with 50 perforated marker strips, strip length of 185 mm
1) For ordering example, see page 359.

white SK U/2,8 WH:UNBEDRUCKT 0803883 10

Self-adhesive marker strips, unprinted, continuous, material
off the roll, for marking with thermal transfer printer, can be sepa-
rated using cutter, pitch as desired, strip length of up to 1000 mm,
14 strips, strip height of 2.8 mm, 1 roll = 90 m

white SK 2,8 WH:REEL 0805205 1

100 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Marking and labeling - MARKING system
Terminal marking

P R I NT E D P R I NT E D P R I NT E D
F OR YOU F OR YOU F OR YOU

Markers labeled with 3.5 mm pitch Markers labeled with 3.81 mm pitch Markers labeled with 5.08 mm pitch

Technical data Technical data Technical data

Polyester Polyester Polyester

-40 ... 150 -40 ... 150 -40 ... 150
DIN EN 61010-1 (VDE 0411-1) DIN EN 61010-1 (VDE 0411-1) DIN EN 61010-1 (VDE 0411-1)
free from silicone and halogen free from silicone and halogen free from silicone and halogen

Ordering data Ordering data Ordering data

Pcs. / Pcs. / Pcs. /

Type Order No. Type Order No. Type Order No.
Pkt. Pkt. Pkt.

SK 3,5/2,8:FORTL.ZAHLEN 0804073 10 SK 3,81/2,8:FORTL.ZAHLEN 0804109 10 SK 5,08/2,8:FORTL.ZAHLEN 0804280 10

SK 2,8 REEL P3,5 WH CUS 0825121 1 SK 2,8 REEL P3,81 WH CUS 0825122 1 SK 2,8 REEL P5,08 WH CUS 0825123 1

SK U/2,8 WH:UNBEDRUCKT 0803883 10 SK U/2,8 WH:UNBEDRUCKT 0803883 10 SK U/2,8 WH:UNBEDRUCKT 0803883 10

SK 2,8 WH:REEL 0805205 1 SK 2,8 WH:REEL 0805205 1 SK 2,8 WH:REEL 0805205 1

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 101

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Marking and labeling - MARKING system
Terminal marking
Self-adhesive marker strips for
terminal blocks
P R I NT E D P R I NT E D
without a marker groove
F OR YOU F OR YOU
– The SK range of self-adhesive labels can
be used to label products that do not fea-
ture a marker groove
– Labeling service: Phoenix Contact can
custom-label SK markers in accordance
with your requirements
Notes:
1) For ordering example, see page 359.

Markers labeled with 5 mm pitch Markers labeled with 5.08 mm pitch

Technical data Technical data

General data
Material Polyester Polyester
Temperature range [°C] -40 ... 150 -40 ... 150
Wipe resistance DIN EN 61010-1 (VDE 0411-1) DIN EN 61010-1 (VDE 0411-1)
Components free from silicone and halogen free from silicone and halogen

Ordering data Ordering data

Pcs. / Pcs. /
Description Color Type Order No. Type Order No.
Pkt. Pkt.
Marker card, printed horizontally, self-adhesive, 10-section
marker strip, 12 identical decades marked, for example,
with 1-10, 11-20, etc. up to 91-100, sufficient for 120 terminal
blocks

white SK 5/3,8:FORTL.ZAHLEN 0804183 10 SK 5,08/3,8:FORTL.ZAHLEN 0804293 10

Marker card, self-adhesive, marked according to customer
specifications, 12-section marker strips, max. 25-pos.
marking per strip1)

white SK 3,8 REEL P5 WH CUS 0825124 1 SK 3,8 REEL P5,08 WH CUS 0825125 1
Marker card, unprinted, DIN A4 format, pitch as desired,
self-adhesive, with 40 perforated marker strips,
strip length of 185 mm

white SK U/3,8 WH:UNBEDRUCKT 0803906 10 SK U/3,8 WH:UNBEDRUCKT 0803906 10

Self-adhesive marker strips, unprinted, continuous,
material off the roll, for marking with thermal transfer printer,
can be separated using cutter, pitch as desired,
strip length of up to 1000 mm, 12 strips,
strip height of 3.8 mm, 1 roll = 90 m
white SK 3,8 WH:REEL 0805218 1 SK 3,8 WH:REEL 0805218 1

102 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Marking and labeling - MARKING system
Terminal marking

P R I NT E D P R I NT E D P R I NT E D
F OR YOU F OR YOU F OR YOU

Markers labeled with 6.2 mm pitch Markers labeled with 7.5 mm pitch Markers labeled with 7.62 mm pitch

Technical data Technical data Technical data

Polyester Polyester Polyester

-40 ... 150 -40 ... 150 -40 ... 150
DIN EN 61010-1 (VDE 0411-1) DIN EN 61010-1 (VDE 0411-1) DIN EN 61010-1 (VDE 0411-1)
free from silicone and halogen free from silicone and halogen free from silicone and halogen

Ordering data Ordering data Ordering data

Pcs. / Pcs. / Pcs. /

Type Order No. Type Order No. Type Order No.
Pkt. Pkt. Pkt.

SK 6,2/3,8:FORTL.ZAHLEN 0804374 10 SK 7,5/3,8:FORTL.ZAHLEN 0804455 10 SK 7,62/3,8:FORTL.ZAHLEN 0804549 10

SK 3,8 REEL P6,2 WH CUS 0825126 1 SK 3,8 REEL P7,5 WH CUS 0825127 1 SK 3,8 REEL P7,62 WH CUS 0825128 1

SK U/3,8 WH:UNBEDRUCKT 0803906 10 SK U/3,8 WH:UNBEDRUCKT 0803906 10 SK U/3,8 WH:UNBEDRUCKT 0803906 10

SK 3,8 WH:REEL 0805218 1 SK 3,8 WH:REEL 0805218 1 SK 3,8 WH:REEL 0805218 1

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 103

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Marking and labeling - MARKING system
Terminal marking
Self-adhesive marker strips for
terminal blocks
P R I NT E D P R I NT E D
without a marker groove
F OR YOU F OR YOU
– The SK range of self-adhesive labels can
be used to label products that do not fea-
ture a marker groove
– Labeling service: Phoenix Contact can
custom-label all TMT markers in accor-
dance with your requirements
Notes:
1) For ordering example, see page 359.

Markers labeled with 7.5 mm pitch Markers labeled with 7.62 mm pitch

Technical data Technical data

General data
Material Polyester Polyester
Temperature range [°C] -40 ... 150 -40 ... 150
Wipe resistance DIN EN 61010-1 (VDE 0411-1) DIN EN 61010-1 (VDE 0411-1)
Components free from silicone and halogen free from silicone and halogen

Ordering data Ordering data

Pcs. / Pcs. /
Description Color Type Order No. Type Order No.
Pkt. Pkt.
Marker card, printed horizontally, self-adhesive, 10-section
marker strip, 10 identical decades marked 1-10, 11-20, etc. up to
91-100, for example, sufficient for 100 terminal blocks

white SK 7,5/5:FORTL.ZAHLEN 0804468 10 SK 7,62/5:FORTL.ZAHLEN 0804552 10

Marker card, self-adhesive, labeled according to customer
specifications, 10-section marker strips, max. 25-pos. marking
per strip1)

white SK 5,0 REEL P7,5 WH CUS 0825131 1 SK 5,0 REEL P7,62 WH CUS 0825132 1
Marker card, unprinted, DIN A4 format, pitch as desired, self-
adhesive, with 35 perforated marker strips, strip length of 185 mm

white SK U/5,0 WH:UNBEDRUCKT 0803922 10 SK U/5,0 WH:UNBEDRUCKT 0803922 10

Self-adhesive marker strips, unprinted, continuous, material
off the roll, for marking with thermal transfer printer, can be sepa-
rated using cutter, pitch as desired, strip length of up to 1000 mm,
10 strips, strip height of 5.0 mm, 1 roll = 90 m

white SK 5,0 WH:REEL 0805221 1 SK 5,0 WH:REEL 0805221 1

104 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Marking and labeling - MARKING system
Terminal marking
Self-adhesive marker strips for
terminal blocks
without a marker groove

Markers with a strip length of up to 1000 mm Markers with a strip length of up to 185 mm

Technical data Technical data

General data
Can be printed with: THERMOMARK ROLL  THERMOMARK ROLL X1  THERMO- CMS-P1-PLOTTER  Office printing systems
MARK X1.1  THERMOMARK X1.2  THERMOMARK S1.1
Material Polyester Polyester
Temperature range [°C] -40 ... 150 -40 ... 150
Wipe resistance DIN EN 61010-1 (VDE 0411-1) DIN EN 61010-1 (VDE 0411-1)
Components free from silicone and halogen free from silicone and halogen

Ordering data Ordering data

Pcs. / Pcs. /
Description Color Type Order No. Type Order No.
Pkt. Pkt.
Self-adhesive marker strips, unprinted, continuous, material
off the roll, for marking with thermal transfer printer, can be sepa-
rated using cutter, pitch as desired, strip length of up to 1000 mm,
14 strips, strip height of 2.8 mm, 1 roll = 90 m

white SK 2,8 WH:REEL 0805205 1

Self-adhesive marker strips, unprinted, continuous, material
off the roll, for marking with thermal transfer printer, can be sepa-
rated using cutter, pitch as desired, strip length of up to 1000 mm,
12 strips, strip height of 3.8 mm, 1 roll = 90 m

white SK 3,8 WH:REEL 0805218 1

Self-adhesive marker strips, unprinted, continuous, material
off the roll, for marking with thermal transfer printer, can be sepa-
rated using cutter, pitch as desired, strip length of up to 1000 mm,
10 strips, strip height of 5.0 mm, 1 roll = 90 m

white SK 5,0 WH:REEL 0805221 1

Self-adhesive marker strips, unprinted, continuous, material
off the roll, for marking with thermal transfer printer, can be sepa-
rated using cutter, pitch as desired, strip length of up to 1000 mm,
7 strips, strip height of 10 mm, 1 roll = 90 m

white SK 10,0 WH:REEL 0812188 1

Marker card, unprinted, DIN A4 format, pitch as desired, self-
adhesive, with 50 perforated marker strips, strip length of 185 mm

white SK U/2,8 WH:UNBEDRUCKT 0803883 10

Marker card, unprinted, DIN A4 format, pitch as desired, self-
adhesive, with 40 perforated marker strips, strip length of 185 mm

white SK U/3,8 WH:UNBEDRUCKT 0803906 10

Marker card, unprinted, DIN A4 format, pitch as desired, self-
adhesive, with 35 perforated marker strips, strip length of 185 mm

white SK U/5,0 WH:UNBEDRUCKT 0803922 10

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 105

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Marking and labeling - MARKING system
Terminal marking
Self-adhesive marker strips for
terminal blocks
without a marker groove

2
11
2
Thermal transfer for rolls

Unlabeled

Technical data
General data
Can be printed with: THERMOMARK ROLL  THERMOMARK ROLL X1  THERMO-
– The TML marking range offers self-adhe- MARK X1.1  THERMOMARK X1.2  THERMOMARK S1.1
Number of individual labels per strip 1
sive marker strips for marking products Material Polyester
that do not have a marker groove Temperature range [°C] -40 ... 150
Wipe resistance DIN EN 61010-1 (VDE 0411-1)
Components free from silicone and halogen

Ordering data

Pcs. /
Description Color Type Order No.
Pkt.
Self-adhesive marker strips, unprinted

1 roll = 2500 strips, lettering field size: 104 x white TML (104X2,8)R 0801832 1
2.8 mm
1 roll = 2500 strips, lettering field size: 104 x white TML (104X3,8)R 0801833 1
3.8 mm
1 roll = 2500 strips, lettering field size: 104 x 5 mm white TML (104X5)R 0801834 1

1 roll = 1500 strips, lettering field size: 104 x 10 mm white TML (104X10)R 0801835 1

106 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Marking and labeling - MARKING system
Terminal marking
Self-adhesive marker strips for
terminal blocks without marker
groove, continuous

2
1
1
2
Thermal transfer for rolls

Unlabeled

Technical data
General data
Can be printed with: THERMOMARK ROLL  THERMOMARK ROLL X1  THERMO-
– The TML marking range offers self-adhe- MARK X1.1  THERMOMARK X1.2  THERMOMARK S1.1
Number of individual labels per strip 14
sive marker strips for marking products Material Polyester
that do not have a marker groove Temperature range [°C] -40 ... 150
– The marker strips are automatically per- Wipe resistance DIN EN 61010-1 (VDE 0411-1)
Components free from silicone and halogen
forated or cut to the required length dur-
ing the printing process Ordering data

Pcs. /
Description Color Type Order No.
Pkt.
Self-adhesive marker strips, unprinted, continuous

1 roll = 30 m continuous, strip height: 2.8 mm white TML (EX2,8)R 0801836 1

1 roll = 30 m continuous, strip height: 3.8 mm white TML (EX3,8)R 0801837 1

1 roll = 30 m continuous, strip height: 5 mm white TML (EX5)R 0801838 1

1 roll = 30 m continuous, strip height: 7 mm white TML (EX7)R 0830837 1

1 roll = 30 m continuous, strip height: 10 mm white TML (EX10)R 0801839 1

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 107

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Marking and labeling - MARKING system
Terminal marking
UniCard group marking for snapping Can be printed with:
into CLIPFIX 35-5 end bracket
P R I NT E D
F OR YOU

1
2
1
2
UV
Thermal transfer for sheets UV LED technology
and cards

Technical data
General data
Can be printed with: THERMOMARK CARD PLUS  THERMOMARK CARD 
– Group marking which saves space BLUEMARK CLED  BLUEMARK LED
Number of individual labels 24
– Large labeling option Material PC
– The markers, which are supplied in uni- Inflammability class according to UL 94 V0
form sheets, can be labeled quickly and Temperature range [°C] -40 ... 120
Wipe resistance DIN EN 61010-1 (VDE 0411-1)
easily using the BLUEMARK CLED and Components free from silicone and halogen
THERMOMARK CARD ...
Ordering data

– The format automatically ensures printing Description Color Type Order No.
Pcs. /
Pkt.
with a high level of positional accuracy
UniCard, can be labeled with THERMOMARK CARD and
– The markers support multiline labeling BLUEMARK
– The sheets provide space for including Lettering field size: 30 x 5 mm white UCT-EM (30X5) 0801505 10
function texts yellow UCT-EM (30X5) YE 0830340 10
UniCard, labeled according to customer specifications1)
– Labeling service: Phoenix Contact can Lettering field size: 30 x 5 mm white UCT-EM (30X5) CUS 0801589 1
custom-label all UniCard markers in ac- yellow UCT-EM (30X5) YE CUS 0830348 1
cordance with your requirements
Accessories
Notes:
End bracket, for snapping onto NS 35, 5.15 mm wide, can be
1) For ordering example, see page 359. marked with ZB 5 and UCT-EM (30X5), parking option for bridges
and test plugs
CLIPFIX 35-5 3022276 50
Magazine, for THERMOMARK CARD ..., for accommodating:
UCT-EM (30X5)
for accommodating UCT-EM (30X5) THERMOMARK CARD-UCT-MAG10 0801737 1

108 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Marking and labeling - MARKING system
Terminal marking
Labeling of terminal block groups for
snapping into a tall marker groove

– Space-saving group labeling directly on the

terminal block
– Fits all terminal blocks with a design width
of 3.5 mm and a tall center marker groove
– Large-surface labeling with labels or man-
ually using B-STIFT or X-PEN

3.5 mm and 5.2 mm pitch 29 mm pitch

Technical data Technical data

General data
Material PA PA / PC
Inflammability class according to UL 94 V2 V2
Temperature range [°C] -40 ... 120 -40 ... 100
Components free from silicone and halogen free from silicone and halogen

Ordering data Ordering data

Pcs. / Pcs. /
Description Color Type Order No. Type Order No.
Pkt. Pkt.
Group marking label, can be snapped into terminal center,
can be marked with an EML (24X3)R or EML (25,4X12,7)R... label
or manually with B-STIFT or X-PEN, in the foot part with ZB 3,5

gray GBS 3,5-25X3,5 0830290 100

gray GBS 3,5-25X12 0830292 100
Group marking label, can be snapped into terminal center,
can be marked with an EML (24X4)R or EML (25,4X12,7)R label
or manually with B-STIFT or X-PEN,
in the foot part with ZB 5, UC-TM 5
gray GBS 5-25X5 0829126 100
gray GBS 5-25X12 0810588 100
Group marking label, can be snapped into terminal center,
can be labeled with ESL 26 x 6 or EMT (25 x 6) R insert strips,
in foot part with zack marker strip ZB, length: 29 mm

gray GBS-ZB/26X6 0809298 50

Accessories Accessories
Label
2500 labels p. roll white EML (24X3)R 0830291 1
2500 labels p. roll white EML (25,4X12,7)R 0816825 1
1000 labels p. roll white EML (24X4)R 0800061 1
Insert strip for laser printer, perforated,
for terminal strip marker KLM, labeling field: 26 x 6 mm

Lettering field size: 26 x 6 mm white ESL 26X 6 0808105 10

Insert labels for thermal transfer printers

Lettering field size: 25 x 6 mm, 5000 labels p. roll white EMT (25X6)R 0817264 1

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 109

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Marking and labeling - MARKING system
Terminal marking
Marker carrier for STP ... multi-level
terminal blocks

Technical data
General data
Material PA
STP ... Inflammability class according to UL 94 V2
– The labeling areas of wired multi-level Temperature range [°C] -40 ... 100
Components free from silicone and halogen
terminal blocks are increased in size using
the marker carriers Ordering data
– Depending on the version, the marker Description Color Type Order No.
Pcs. /
carriers are placed in the receivers on the Pkt.

upper terminal block level Double marker carrier, can be snapped into push-in double-level
terminal blocks PTTB 1,5/S, can be labeled with ZB 3,5 or ZBF 3,5
STP ...-ZB gray STP 3,5-2 0830131 100
– The marker carriers can, for example, Triple marker carrier, can be snapped into the push-in three-level
snap into the center marking groove of ST terminal block PT 1,5/S-3..., can be labeled with ZB 3,5 or ZBF 3,5

spring-cage terminal blocks and double gray STP 3,5-3 0830132 100
the marking area; see figure below Double marker carrier, can be snapped into the double-level ter-
minal blocks STTB 1,5, PTTB 1,5, can be labeled with UC-TM 4,
ZB 4 or UC-TMF 4, ZBF 4
CARRIER-TM 300
– Can be snapped into all terminal blocks in gray STP 4-2 0810575 100
the CLIPLINE complete system that have Double marker carrier, can be snapped into STTB 2,5, STTB 4,
PTTB 2,5, PTTB 4 double-level terminal blocks, can be labeled with
a lateral flat marker groove UC-TM 5, ZB 5 or UC-TMF 5, ZBF 5
– For accommodating ZB ..., UC-TM ... or gray STP 5-2 0800967 100
UCT-TM ... terminal markers which in- Three-compartment marker carrier, can be snapped into
creases the marking area ST 2,5-3... and PT 2,5-3... three-level terminal blocks, can be
labeled with UC-TMF 5 and ZBF 5 or ...TM 5 and ZB 5
CARRIER-TMD 300 gray STP 5-3 0810562 100
– Double-row snap-in marker adapter for Double marker carrier, snaps into double-level fast connection
terminal blocks, QTTCB ... and QTTCBS, can be labeled with ZB 5
accommodating two ZB ... or UC-TM ... and ZBF 5
and UCT-TM ... terminal markers which gray STP 5-2/S 0800970 100
doubles the marking area Double marker carrier, snaps into all terminal blocks with a width
of 4.2 mm and a zack marker strip center groove, can be labeled
with ZB 4 or ZBF 4

gray STP 4-2-ZB 3038613 100

Double marker carrier, snaps into all terminal blocks with a width
of 5.2 mm and a zack marker strip center groove, can be labeled
with ZB 5 or ZBF 5

gray STP 5-2-ZB 3037643 100

Marker adapter, 300 mm long, can be snapped into the lateral
groove on modular terminal blocks, designed to accommodate
ZB ... or UC-TM ...
gray CARRIER-TM 300 0828282 25
Marker adapter, double row, 300 mm long, can be snapped into
the center groove on modular terminal blocks, designed to accom-
modate two ZB ... or UC-TM ...
gray CARRIER-TMD 300 0828693 25
Marker adapters, such as the CARRIER-TM 300; marking area at
an angle to the top of the terminal block

gray CARRIER-TMH 300 0830670 25

110 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Marking and labeling - MARKING system
Terminal marking
WS... warning labels

Warning labels for terminals

from the UT ... and ST ... series

Technical data
General data
Material PA
– Warning labels and warning covers serve Wipe resistance DIN EN 61010-1 (VDE 0411-1)
to cover and identify mains terminal Ordering data
blocks
Pcs. /
– This prevents accidental actuation of the Description Color Type Order No.
Pkt.
terminal points Warning label, for UT series
– The warning labels snap into the screw 5.2 mm wide yellow WS UT 2,5 3047923 10
shafts of the relevant terminal 6.2 mm wide yellow WS UT 4 3047332 10
8.2 mm wide yellow WS UT 6 3047345 10
– Can be isolated lengthwise and crosswise 10.2 mm wide yellow WS UT 10 3047361 10
12 mm wide yellow WS UT 16 3047374 10
16 mm wide yellow WS UT 35 3047387 10
Warning cover, for ST series
4.2 mm wide yellow WST 1,5 3030958 50
5.2 mm wide yellow WST 2,5 3030941 50
6.2 mm wide yellow WST 4 3030954 50
8.2 mm wide yellow WST 6 3030967 10
10.2 mm wide yellow WST 10/35 3030006 25

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 111

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Marking and labeling - MARKING system
Terminal marking

Terminal marking for Phoenix Contact

UC-TM 4 UC-TM 5 UC-TM 6 UC-TM 8 UC-TM 10 UC-TM 12 UC-TM 16

see page 58 onwards
ZB 4 ZB 5 ZB 6 ZB 8 ZB 10 ZB 12 ZB 16
see page 68 onwards
UCT-TM 4 UCT-TM 5 UCT-TM 6 UCT-TM 8 UCT-TM 10 UCT-TM 12 UCT-TM 16
see page 82 onwards
TMT 4 R TMT 5 R TMT 6 R TMT 8 R TMT 10 R TMT 100 R TMT 100 R
Large terminal block markers for see page 94 onwards
central and side labeling Pitch 4 5 6 8 10 12 16
Screw terminal blocks
UT 2,5..., UTTB 2,5..., UTN 2,5..., MUT 2,5... 5
UT 4..., UTTB 4..., UTME(D) 4..., UTN 4..., USST 4... 6
UT 6..., UTME(D) 6..., UTN 6..., USST 6... 8
UT 10..., UTN 10..., USST 10... 10
UT 16..., UTI 16... 12
UT 35 16
UK 1,5 N..., USLKG 1,5 N 4
UK 2,5 N..., USLKG 2,5 N, UK 3 N...,
5
USLKG 3, UKK(B) 3..., UDK 3..., MTK(D)...
UK 5 N..., USLKG 5 N, UDK 4..., UKK(B) 5,
UDMTK(B) 5..., UKN 2,5..., UKN 5..., PIK 4..., 6
SSK 0525...
UK 6 N..., USLKG 6 N, UKN 6..., PIK 6...,
8
URTK..., UGSK..., URDK..., UK 6-T..., SSK 110
UK 10 N..., USLKG 10 N, UKKB 10...,
10
UKN 10..., SK 116...
U(I)K 16..., U(I)SLKG 16, UIKN 16... 12
U(I)K 35..., U(I)SLKG 35, UIKN 35..., SSK 135... 15
UKH..., USLKG 50/95, USLKG 50/70/95 > 16
DIK(D) 1,5..., DOK(D) 1,5..., VIOK 1,5...,
6
DLK(B) 2,5..., SLKK 5...
UVKB 4..., UHK 4..., USK 4..., UK 4...,
6
UKK 4..., VBST 4...
UK 5-HESI..., UKK 5-HESI..., UK-SI...,
8
UK 6-FSI..., UK 10-DREHSI...
UK 6,3-HESI..., USIG... 10
MT 1,5..., MTTB 1,5... 4
MBK 6..., MSLKG 6 8
DFK 4... 6
DFK 5... 9.5
UW(V) 4... 8
UW(V) 10.../16.../25...  10
HDFK(V) 50..., HDFK(V) 95..., > 18

The pitch of the terminal block corresponds to the width of the label The pitch of the terminal block is greater than the width of the label

112 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Marking and labeling - MARKING system
Terminal marking

UC-TMF 4 UC-TMF 5 UC-TMF 6 UC-TMF 8 UC-TMF 10 UC-TMF 12 UC-TMF 16 US-TMF 100

see page 62 onwards 91
ZBF 4 ZBF 5 ZBF 6 ZBF 8 ZBF 10 ZBF 12 ZBF 16
see page 76 onwards
UCT-TMF 4 UCT-TMF 5 UCT-TMF 6 UCT-TMF 8 UCT-TMF 10 UCT-TMF 12 UCT-TMF 16
see page 86 onwards
TMT 4 R TMT 5 R TMT 6 R TMT 8 R TMT 10 R TMT 100 R TMT 100 R
Small terminal block markers for see page 94 onwards
central and side labeling Pitch 4 5 6 8 10 12 16
Screw terminal blocks
UT 2,5..., UTTB 2,5..., UTN 2,5...,
5
MUT 2,5..., UTI 2,5...
UT 4..., UTTB 4..., UTME(D) 4..., UTN 4...,
6
USST 4...
UT 6..., UTME(D) 6..., UTN 6..., USST 6... 8
UT 10..., UTN 10..., USST 10... 10
UT 16..., UTI 16... 12
UT 35 16
UK 1,5 N..., USLKG 1,5 N 4
UK 2,5 N..., USLKG 2,5 N, UK 3 N...,
5
USLKG 3, UKK(B) 3..., UDK 3..., MTK(D)...
UK 5 N..., USLKG 5 N, UDK 4..., UKK(B) 5, UD-
MTK(B) 5..., UKN 2,5..., UKN 5..., PIK 4..., SSK 6
0525
UK 6 N..., USLKG 6 N, UKN 6...,
PIK 6...,URTK..., UGSK..., URDK..., 8
UK 6-T, SSK 110
UK 10 N..., USLKG 10 N, UKKB 10...,
10
UKN 10..., SSK 116
U(I)K 16..., U(I)SLKG 16, UIKN 16... 12
U(I)K 35..., U(I)SLKG 35, UIKN 35...,
15
SSK 135

UKH..., USLKG 50/95, USLKG 50/70/95 > 16

DIK(D) 1,5..., DOK(D) 1,5..., VIOK 1,5...,

6
DLK(B) 2,5..., SLKK 5...
UVKB 4..., UHK 4..., USK 4..., UK 4...,
6
UKK 4..., VBST 4...
UK 5-HESI..., UKK 5-HESI..., UK-SI...,
8
UK 6-FSI..., UK 10-DREHSI...

UK 6,3-HESI..., UK 10,3 HESI..., USIG... 10

MT 1,5..., MTTB 1,5... 4

MBK 6..., MSLKG 6 8
DFK 4... 6
DFK 5... 9.5
UW(V) 4... 8
UW(V) 10.../16.../25...  10
HDFK(V) 50..., HDFK(V) 95... > 18

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 113

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Marking and labeling - MARKING system
Terminal marking

Terminal marking for Phoenix Contact

UC-TM 4 UC-TM 5 UC-TM 6 UC-TM 8 UC-TM 10 UC-TM 12 UC-TM 16

see page 58 onwards
ZB 3,5 ZB 4 ZB 5 ZB 6 ZB 7,62 ZB 8 ZB 10 ZB 12 ZB 16
see page 68 onwards
UCT-TM 3,5 UCT-TM 4 UCT-TM 5 UCT-TM 6 UCT-TM 7,62 UCT-TM 8 UCT-TM 10 UCT-TM 12 UCT-TM 16
see page 82 onwards
TMT 4 R TMT 5 R TMT 6 R TMT 8 R TMT 10 R TMT 100 R TMT 100 R
Large terminal block mark- see page 94 onwards
ers for central labeling Pitch 3.5 4 5 6 7.62 8 10 12 16
Spring-cage terminal blocks
ST 1,5/S-QUATTRO 3.5
ST 1,5... 4

ST 2,5... (except ST 2,5-3L) 5

ST 4..., STTB 4... 6

ST 6..., STME(D) 6... 8
ST 10... 10
ST 16... 12
ST 35... 16
ST 4-HESI (6,3 x 32),
8
ST 4-FSI...
STU 2,5... 5
STU 4..., STTBU 4... 6
STU 10... 10
STU 35... 16
STS 2,5..., STTBS 2,5... 5
STS 4..., STTBS 4... 6
STS 6... 8
STI 2,5..., STN 2,5... 5
STI 4..., STN 4... 6
STI 10..., STN 10... 10
STI 16..., STN 16... 12
STN 35... 16
SRTK 6..., SGSK 6...,
8
SRDK 6...
ZRV... 7.62
ZRTK..., ZGSK..., ZRDK... 8

The pitch of the terminal block corresponds to the width of the label The pitch of the terminal block is greater than the width of the label

114 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Marking and labeling - MARKING system
Terminal marking

UC-TMF 4 UC-TMF 5 UC-TMF 6 UC-TMF 8 UC-TMF 10 UC-TMF 12 UC-TMF 16 US-TMF 100

see page 62 onwards 91
ZBF 3,5 ZBF 4 ZBF 5 ZBF 6 ZBF 8 ZBF 10 ZBF 12 ZBF 16
see page 76 onwards
UCT-TMF 3,5 UCT-TMF 4 UCT-TMF 5 UCT-TMF 6 UCT-TMF 8 UCT-TMF 10 UCT-TMF 12 UCT-TMF 16
see page 86 onwards
TMT 4 R TMT 5 R TMT 6 R TMT 8 R TMT 10 R TMT 100 R TMT 100 R
Small terminal block markers see page 94 onwards
for central and side labeling Pitch 3.5 4 5 6 8 10 12 16
Spring-cage terminal blocks
ST 1,5/S-QUATTRO 3.5
ST 1,5..., STTB 1,5... 4
ST 2,5..., STTB 2,5...,
5
ST 2,5-3..., STIO...
ST 4..., STTB 4... 6
ST 6..., STME(D) 6... 8
ST 10... 10
ST 16... 12
ST 35... 16
ST 4-HESI (6,3 x 32),
8
ST 4-FSI...
STU 2,5... 5
STU 4..., STTBU 4... 6
STU 10... 10
STU 35... 16
STS 2,5..., STTBS 2,5... 5
STS 4..., STTBS 4... 6
STS 6... 8
STI 2,5..., STN 2,5... 5
STI 4..., STN 4... 6
STI 10..., STN 10... 10
STI 16..., STN 16... 12
STN 35... 16
SRTK 6..., SGSK 6...,
8
SRDK 6...
ZRV... 7.62
ZRTK..., ZGSK..., ZRDK... 8
ZFK 6-DREHSI... 12
ZFKK 2,5... 5
ZDMTK 2,5... 6
ZPV... 5
MZFKK 1,5... 5
MSB(V) 2,5.../
5/10
MSDB(V) 2,5...

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 115

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Marking and labeling - MARKING system
Terminal marking

Terminal marking for Phoenix Contact

UC-TM 4 UC-TM 5 UC-TM 6 UC-TM 8 UC-TM 10 UC-TM 12 UC-TM 16 US-TM 100

see page 58 onwards 91
ZB 3,5 ZB 4 ZB 5 ZB 6 ZB 8 ZB 10 ZB 12 ZB 16
see page 68 onwards
UCT-TM 3,5 UCT-TM 4 UCT-TM 5 UCT-TM 6 UCT-TM 8 UCT-TM 10 UCT-TM 12 UCT-TM 16
see page 82 onwards
TMT 4 R TMT 5 R TMT 6 R TMT 8 R TMT 10 R TMT 100 R TMT 100 R
Large terminal block markers
see page 94 onwards
for central labeling
Pitch 3.5 4 5 6 8 10 12 16
Push-in connection terminal blocks

PT 1,5/S..., PTTB 1,5/S...,

3.5
PTS 1,5/S..., PTTBS 1,5/S...

PT 2,5..., PTTB 2,5...,

PTTBS 2,5..., PTI 2,5...,
5
PTN 2,5..., PTS 2,5...,
PTU 2,5...
PT 4..., PTME(D) 4...,
PTTB 4..., PTI 4..., PTN 4..., 6
PTU 4...
PT 6..., PTME 6..., PTI 6...,
8
PTN 6...
PT 10... 10
PT 16... 12
PTPOWER... 25

Fast connection terminal blocks

QTC(U)(S) 1,5..., 5
QTC(U)(S) 2,5..., 6

Bolt connection terminal blocks

OTTA 2,5... 9
OTTA 6.... 11
OTTA 25... 18
RT(O) 3..., RBO... 12
RT(O) 5... 16
RT(O) 8... 20
HV M.../1, HV M.../2 > 13
UHV 25- UHV 240 > 26

The pitch of the terminal block corresponds to the width of the label The pitch of the terminal block is greater than the width of the label

116 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Marking and labeling - MARKING system
Terminal marking

UC-TMF 4 UC-TMF 5 UC-TMF 6 UC-TMF 8 UC-TMF 10 UC-TMF 12 UC-TMF 16 US-TMF 100

see page 62 onwards 91
ZBF 3,5 ZBF 4 ZBF 5 ZBF 6 ZBF 8 ZBF 10 ZBF 12 ZBF 16
see page 76 onwards
UCT-TMF 3,5 UCT-TMF 4 UCT-TMF 5 UCT-TMF 6 UCT-TMF 8 UCT-TMF 10 UCT-TMF 12 UCT-TMF 16
see page 86 onwards
TMT 4 R TMT 5 R TMT 6 R TMT 8 R TMT 10 R TMT 100 R TMT 100 R
Small terminal block markers for
see page 94 onwards
central and side labeling
Pitch 3.5 4 5 6 8 10 12 16
Push-in connection terminal blocks

PT 1,5/S..., PTTB 1,5/S..., PTIO...,

3.5
PTS 1,5/S..., PTTBS 1,5/S, MPT 1,5/S...

PT 2,5..., PTTB 2,5..., PTTBS 2,5...,

PTI 2,5..., PTN 2,5..., PTS 2,5..., 5
PTU 2,5..., MPT 2,5...
PT 4..., PTME(D) 4..., PTTB 4...,
6
PTI 4..., PTN 4..., PTU 4
PT 6..., PTME 6..., PTI 6..., PTN 6... 8
PT 10... 10
PT 16... 12
PTPOWER... 25

Fast connection terminal blocks

QTC(U)(S) 1,5...,, QTTCB(U (S) 1,5... 5
QTC(U)(S) 2,5..., 6

Bolt connection terminal blocks

OTTA 2,5... 9
OTTA 6.... 11
OTTA 25... 18
RT(O) 3... 12
RT(O) 5... 16
RT(O) 8... 20
HV M.../1, HV M.../2 > 13
UHV 25- UHV 240 > 26

COMBI plugs and couplings

UPBV 2,5..., SP(V) 2,5..., SP-H 2,5 ...,
5
SP(D)B 2,5..., SC 2,5...
UP 4..., UPBV 4... 5
SP 4..., SC 4... 6
PP-H 1,5/S..., PPC 1,5/S... 3.5
PP-H 2,5..., QP 1,5... 5
UP 6... 8
PP-H 4... 6
PP-H 6..., PPC 6... 8

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 117

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Marking and labeling - MARKING system
Terminal marking
UniCard marking for terminal blocks Can be printed with:
from other manufacturers with a tall
P R I NT E D
marker groove
F OR YOU

y
123
UV x
UV LED technology Plotter

96 markers for a terminal block width of 5 mm

Technical data
General data
Can be printed with: BLUEMARK CLED  BLUEMARK LED  CMS-P1-PLOTTER
– The UC1-TM ... UniCard labeling range Number of individual labels 96
includes markers for Weidmüller, Number of individual labels per strip 12
Material PA
Conta-Clip, and Klemsan terminal blocks Inflammability class according to UL 94 V2
– The markers, which are supplied in uni- Temperature range [°C] -40 ... 120
Wipe resistance DIN EN 61010-1 (VDE 0411-1)
form sheets, can be printed onto quickly Components free from silicone and halogen
and easily using the BLUEMARK CLED
Ordering data
– The multi-section marking strips are easy
to fit and can be easily separated if re- Description Color Type Order No.
Pcs. /
Pkt.
quired
– The markers support multiline labeling UniCard, for labeling terminal block brands from other companies

– The sheets provide space for including white UC1-TM 5 0821784 10

function texts red UC1-TM 5 RD 0828185 10
orange UC1-TM 5 OG 0828186 10
– Labeling service: Phoenix Contact can yellow UC1-TM 5 YE 0828187 10
custom-label all UniCard markers in blue UC1-TM 5 BU 0828188 10
accordance with your requirements green UC1-TM 5 GN 0828189 10
With offset foot, see pictogram product photo white
Notes:
UniCard, for labeling terminal block brands from other companies,
An overview of markable terminal blocks can be found labeled acc. to customer specifications1)
on page 140 onwards.
1) For ordering example, see page 359. white UC1-TM 5 CUS 0824507 1
red UC1-TM 5 RD CUS 0828318 1
orange UC1-TM 5 OG CUS 0828319 1
yellow UC1-TM 5 YE CUS 0828320 1
blue UC1-TM 5 BU CUS 0828321 1
green UC1-TM 5 GN CUS 0828322 1
With offset foot, see pictogram product photo white

Accessories
Magazine, for CMS-P1-PLOTTER
P1 UC-MAG 5 5146118 1

118 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Marking and labeling - MARKING system
Terminal marking

P R I NT E D P R I NT E D P R I NT E D
F OR YOU F OR YOU F OR YOU

96 markers for a terminal block width of 5 mm, 80 markers for a terminal block width of 6 mm 64 markers for a terminal block width of 8 mm
with an offset foot

Technical data Technical data Technical data

BLUEMARK CLED  BLUEMARK LED  CMS-P1-PLOTTER BLUEMARK CLED  BLUEMARK LED  CMS-P1-PLOTTER BLUEMARK CLED  BLUEMARK LED  CMS-P1-PLOTTER
96 80 64
12 10 8
PA PA PA
V2 V2 V2
-40 ... 120 -40 ... 120 -40 ... 120
DIN EN 61010-1 (VDE 0411-1) DIN EN 61010-1 (VDE 0411-1) DIN EN 61010-1 (VDE 0411-1)
free from silicone and halogen free from silicone and halogen free from silicone and halogen

Ordering data Ordering data Ordering data

Pcs. / Pcs. / Pcs. /

Type Order No. Type Order No. Type Order No.
Pkt. Pkt. Pkt.

UC1-TM 6 0821247 10 UC1-TM 8 0821739 10

UC1-TM 6 RD 0828190 10 UC1-TM 8 RD 0828195 10
UC1-TM 6 OG 0828191 10 UC1-TM 8 OG 0828196 10
UC1-TM 6 YE 0828192 10 UC1-TM 8 YE 0828197 10
UC1-TM 6 BU 0828193 10 UC1-TM 8 BU 0828198 10
UC1-TM 6 GN 0828194 10 UC1-TM 8 GN 0828199 10
UC1U-TM 5 0821302 10

UC1-TM 6 CUS 0824509 1 UC1-TM 8 CUS 0824511 1

UC1-TM 6 RD CUS 0828323 1 UC1-TM 8 RD CUS 0828328 1
UC1-TM 6 OG CUS 0828324 1 UC1-TM 8 OG CUS 0828329 1
UC1-TM 6 YE CUS 0828325 1 UC1-TM 8 YE CUS 0828330 1
UC1-TM 6 BU CUS 0828326 1 UC1-TM 8 BU CUS 0828331 1
UC1-TM 6 GN CUS 0828327 1 UC1-TM 8 GN CUS 0828332 1
UC1U-TM 5 CUS 0824521 1

Accessories Accessories Accessories

P1 UC-MAG 5 5146118 1 P1 UC-MAG 5 5146118 1 P1 UC-MAG 5 5146118 1

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 119

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Marking and labeling - MARKING system
Terminal marking
UniCard marking for terminal blocks Can be printed with:
from other manufacturers with a flat
P R I NT E D
marker groove
F OR YOU

y
123
UV x
UV LED technology Plotter

120 markers for a terminal block width of 4 mm

Technical data
General data
Can be printed with: BLUEMARK CLED  BLUEMARK LED  CMS-P1-PLOTTER
– The UC1-TMF ... UniCard labeling range Number of individual labels 120
includes markers for Weidmüller, Wago, Number of individual labels per strip 15
Material PA
ABB (entrelec), Conta-Clip, and Klemsan Inflammability class according to UL 94 V2
terminal blocks Temperature range [°C] -40 ... 120
Wipe resistance DIN EN 61010-1 (VDE 0411-1)
– The markers, which are supplied in uni- Components free from silicone and halogen
form sheets, can be printed onto quickly
Ordering data
and easily using the BLUEMARK CLED
– The multi-section marking strips are easy Description Color Type Order No.
Pcs. /
Pkt.
to fit and can be easily separated if re-
quired UniCard, for labeling terminal block brands from other companies

– The markers support multiline labeling white UC1-TMF 4 0821360 10

– The sheets provide space for including red UC1-TMF 4 RD 0828200 10
orange UC1-TMF 4 OG 0828201 10
function texts yellow UC1-TMF 4 YE 0828202 10
– Labeling service: Phoenix Contact can blue UC1-TMF 4 BU 0828203 10
custom-label all UniCard markers in ac- green UC1-TMF 4 GN 0828204 10
UniCard, for labeling terminal block brands from other companies,
cordance with your requirements labeled acc. to customer specifications1)

Notes: white UC1-TMF 4 CUS 0824513 1

An overview of markable terminal blocks can be found red UC1-TMF 4 RD CUS 0828333 1
on page 140 onwards. orange UC1-TMF 4 OG CUS 0828334 1
1)
yellow UC1-TMF 4 YE CUS 0828335 1
For ordering example, see page 359.
blue UC1-TMF 4 BU CUS 0828336 1
green UC1-TMF 4 GN CUS 0828337 1

Accessories
Magazine, for CMS-P1-PLOTTER
P1 UC-MAG 4 5146105 1

120 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Marking and labeling - MARKING system
Terminal marking

P R I NT E D P R I NT E D P R I NT E D
F OR YOU F OR YOU F OR YOU

96 markers for a terminal block width of 5 mm 80 markers for a terminal block width of 6 mm 64 markers for a terminal block width of 8 mm

Technical data Technical data Technical data

BLUEMARK CLED  BLUEMARK LED  CMS-P1-PLOTTER BLUEMARK CLED  BLUEMARK LED  CMS-P1-PLOTTER BLUEMARK CLED  BLUEMARK LED  CMS-P1-PLOTTER
96 80 64
12 10 8
PA PA PA
V2 V2 V2
-40 ... 120 -40 ... 120 -40 ... 120
DIN EN 61010-1 (VDE 0411-1) DIN EN 61010-1 (VDE 0411-1) DIN EN 61010-1 (VDE 0411-1)
free from silicone and halogen free from silicone and halogen free from silicone and halogen

Ordering data Ordering data Ordering data

Pcs. / Pcs. / Pcs. /

Type Order No. Type Order No. Type Order No.
Pkt. Pkt. Pkt.

UC1-TMF 5 0821425 10 UC1-TMF 6 0821483 10 UC1-TMF 8 0821548 10

UC1-TMF 5 RD 0828205 10 UC1-TMF 6 RD 0828209 10 UC1-TMF 8 RD 0828214 10
UC1-TMF 5 OG 0828206 10 UC1-TMF 6 OG 0828210 10 UC1-TMF 8 OG 0828215 10
UC1-TMF 5 YE 0828127 10 UC1-TMF 6 YE 0828211 10 UC1-TMF 8 YE 0828216 10
UC1-TMF 5 BU 0828207 10 UC1-TMF 6 BU 0828212 10 UC1-TMF 8 BU 0828217 10
UC1-TMF 5 GN 0828208 10 UC1-TMF 6 GN 0828213 10 UC1-TMF 8 GN 0828218 10

UC1-TMF 5 CUS 0824515 1 UC1-TMF 6 CUS 0824517 1 UC1-TMF 8 CUS 0824519 1

UC1-TMF 5 RD CUS 0828338 1 UC1-TMF 6 RD CUS 0828343 1 UC1-TMF 8 RD CUS 0828348 1
UC1-TMF 5 OG CUS 0828339 1 UC1-TMF 6 OG CUS 0828344 1 UC1-TMF 8 OG CUS 0828349 1
UC1-TMF 5 YE CUS 0828340 1 UC1-TMF 6 YE CUS 0828345 1 UC1-TMF 8 YE CUS 0828350 1
UC1-TMF 5 BU CUS 0828341 1 UC1-TMF 6 BU CUS 0828346 1 UC1-TMF 8 BU CUS 0828351 1
UC1-TMF 5 GN CUS 0828342 1 UC1-TMF 6 GN CUS 0828347 1 UC1-TMF 8 GN CUS 0828352 1

Accessories Accessories Accessories

P1 UC-MAG 4 5146105 1 P1 UC-MAG 4 5146105 1 P1 UC-MAG 4 5146105 1

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 121

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Marking and labeling - MARKING system
Terminal marking
UniCard marking for terminal blocks Can be printed with:
from other manufacturers with a tall
P R I NT E D
marker groove
F OR YOU

y
123
UV x
UV LED technology Plotter

120 markers for a terminal block width of 4 mm

Technical data
General data
Can be printed with: BLUEMARK CLED  BLUEMARK LED  CMS-P1-PLOTTER
– The UC2-TM ... UniCard labeling range Number of individual labels 120
includes markers for Wago terminal Number of individual labels per strip 15
Material PA
blocks Inflammability class according to UL 94 V2
– The markers, which are supplied in uni- Temperature range [°C] -40 ... 120
Wipe resistance DIN EN 61010-1 (VDE 0411-1)
form sheets, can be printed onto quickly Components free from silicone and halogen
and easily using the BLUEMARK CLED
Ordering data
– The multi-section marking strips are easy
to fit and can be easily separated if re- Description Color Type Order No.
Pcs. /
Pkt.
quired
– The markers support multiline labeling UniCard, for labeling terminal block brands from other companies

– The sheets provide space for including white UC2-TM 4 0821713 10

function texts UniCard, for labeling terminal block brands from other companies,
labeled acc. to customer specifications1)
– Labeling service: Phoenix Contact can
custom-label all UniCard markers in ac- white UC2-TM 4 CUS 0824533 1
white
cordance with your requirements white
white
Notes:
An overview of markable terminal blocks can be found Accessories
on page 140 onwards.
Magazine, for CMS-P1-PLOTTER
1) For ordering example, see page 359. P1 UC-MAG 5 5146118 1

122 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Marking and labeling - MARKING system
Terminal marking

P R I NT E D P R I NT E D P R I NT E D
F OR YOU F OR YOU F OR YOU

96 markers for a terminal block width of 5 mm 80 markers for a terminal block width of 6 mm 64 markers for a terminal block width of 8 mm

Technical data Technical data Technical data

BLUEMARK CLED  BLUEMARK LED  CMS-P1-PLOTTER BLUEMARK CLED  BLUEMARK LED  CMS-P1-PLOTTER BLUEMARK CLED  BLUEMARK LED  CMS-P1-PLOTTER
96 80 64
12 10 8
PA PA PA
V2 V2 V2
-40 ... 120 -40 ... 120 -40 ... 120
DIN EN 61010-1 (VDE 0411-1) DIN EN 61010-1 (VDE 0411-1) DIN EN 61010-1 (VDE 0411-1)
free from silicone and halogen free from silicone and halogen free from silicone and halogen

Ordering data Ordering data Ordering data

Pcs. / Pcs. / Pcs. /

Type Order No. Type Order No. Type Order No.
Pkt. Pkt. Pkt.

UC2-TM 5 0821690 10 UC2-TM 6 0821674 10 UC2-TM 8 0821755 10

UC2-TM 5 CUS 0824535 1

UC2-TM 6 CUS 0824537 1
UC2-TM 8 CUS 0824539 1

Accessories Accessories Accessories

P1 UC-MAG 5 5146118 1 P1 UC-MAG 5 5146118 1 P1 UC-MAG 5 5146118 1

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 123

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Marking and labeling - MARKING system
Terminal marking
UniCard marking for terminal blocks Can be printed with:
from other manufacturers with a flat
P R I NT E D
marker groove
F OR YOU

y
123
UV x
UV LED technology Plotter

120 markers for a terminal block width of 4 mm

Technical data
General data
Can be printed with: BLUEMARK CLED  BLUEMARK LED  CMS-P1-PLOTTER
– The UC2F-TM ... UniCard labeling range Number of individual labels 120
includes markers for ABB (entrelec) ter- Number of individual labels per strip 15
Material PA
minal blocks Inflammability class according to UL 94 V2
– The markers, which are supplied in uni- Temperature range [°C] -40 ... 120
Wipe resistance DIN EN 61010-1 (VDE 0411-1)
form sheets, can be printed onto quickly Components free from silicone and halogen
and easily using the BLUEMARK CLED
Ordering data
– The multi-section marking strips are easy
to fit and can be easily separated if re- Description Color Type Order No.
Pcs. /
Pkt.
quired
– The markers support multiline labeling UniCard, for labeling terminal block brands from other companies

– The sheets provide space for including white UC2F-TM 4 0822178 10

function texts UniCard, for labeling terminal block brands from other companies,
labeled acc. to customer specifications1)
– Labeling service: Phoenix Contact can
custom-label all UniCard markers in ac- white UC2F-TM 4 CUS 0824525 1

cordance with your requirements Accessories

Magazine, for CMS-P1-PLOTTER
Notes:
P1 UC-MAG 4 5146105 1
An overview of markable terminal blocks can be found
on page 140 onwards.
1) For ordering example, see page 359.

124 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Marking and labeling - MARKING system
Terminal marking

P R I NT E D P R I NT E D P R I NT E D
F OR YOU F OR YOU F OR YOU

96 markers for a terminal block width of 5 mm 80 markers for a terminal block width of 6 mm 64 markers for a terminal block width of 8 mm

Technical data Technical data Technical data

BLUEMARK CLED  BLUEMARK LED  CMS-P1-PLOTTER BLUEMARK CLED  BLUEMARK LED  CMS-P1-PLOTTER BLUEMARK CLED  BLUEMARK LED  CMS-P1-PLOTTER
96 80 64
12 10 8
PA PA PA
V2 V2 V2
-40 ... 120 -40 ... 120 -40 ... 120
DIN EN 61010-1 (VDE 0411-1) DIN EN 61010-1 (VDE 0411-1) DIN EN 61010-1 (VDE 0411-1)
free from silicone and halogen free from silicone and halogen free from silicone and halogen

Ordering data Ordering data Ordering data

Pcs. / Pcs. / Pcs. /

Type Order No. Type Order No. Type Order No.
Pkt. Pkt. Pkt.

UC2F-TM 5 0822181 10 UC2F-TM 6 0822194 10 UC2F-TM 8 0822204 10

UC2F-TM 5 CUS 0824527 1 UC2F-TM 6 CUS 0824529 1 UC2F-TM 8 CUS 0824531 1

Accessories Accessories Accessories

P1 UC-MAG 4 5146105 1 P1 UC-MAG 4 5146105 1 P1 UC-MAG 4 5146105 1

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 125

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Marking and labeling - MARKING system
Terminal marking
UniCard marking for terminal blocks Can be printed with:
from other manufacturers with a tall
P R I NT E D
marker groove
F OR YOU

y
123
UV x
UV LED technology Plotter

96 markers for a terminal block width of 5 mm

Technical data
General data
Can be printed with: BLUEMARK CLED  BLUEMARK LED  CMS-P1-PLOTTER
– The UC3-TM ... UniCard labeling range Number of individual labels 96
includes markers for Wieland and Number of individual labels per strip 12
Material PA
Legrand terminal blocks Inflammability class according to UL 94 V2
– The markers, which are supplied in uni- Temperature range [°C] -40 ... 120
Wipe resistance DIN EN 61010-1 (VDE 0411-1)
form sheets, can be printed onto quickly Components free from silicone and halogen
and easily using the BLUEMARK CLED
Ordering data
– The multi-section marking strips are easy
to fit and can be easily separated if re- Description Color Type Order No.
Pcs. /
Pkt.
quired
– The markers support multiline labeling UniCard, for labeling terminal block brands from other companies

– The sheets provide space for including white UC3-TM 5 0822369 10

function texts UniCard, for labeling terminal block brands from other companies,
labeled acc. to customer specifications1)
– Labeling service: Phoenix Contact can
custom-label all UniCard markers in ac- white UC3-TM 5 CUS 0826888 1

cordance with your requirements Accessories

Magazine, for CMS-P1-PLOTTER
Notes:
P1 UC-MAG 1 5146079 1
An overview of markable terminal blocks can be found
on page 140 onwards.
1) For ordering example, see page 359.

126 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Marking and labeling - MARKING system
Terminal marking

P R I NT E D P R I NT E D
F OR YOU F OR YOU

80 markers for a terminal block width of 6 mm 64 markers for a terminal block width of 8 mm

Technical data Technical data

BLUEMARK CLED  BLUEMARK LED  CMS-P1-PLOTTER BLUEMARK CLED  BLUEMARK LED  CMS-P1-PLOTTER
80 64
10 8
PA PA
V2 V2
-40 ... 120 -40 ... 120
DIN EN 61010-1 (VDE 0411-1) DIN EN 61010-1 (VDE 0411-1)
free from silicone and halogen free from silicone and halogen

Ordering data Ordering data

Pcs. / Pcs. /
Type Order No. Type Order No.
Pkt. Pkt.

UC3-TM 6 0822385 10 UC3-TM 8 0822408 10

UC3-TM 6 CUS 0826889 1 UC3-TM 8 CUS 0826890 1

Accessories Accessories

P1 UC-MAG 1 5146079 1 P1 UC-MAG 1 5146079 1

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 127

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Marking and labeling - MARKING system
Terminal marking
UniCard marking for terminal blocks
from other manufacturers with a tall
P R I NT E D P R I NT E D
marker groove
F OR YOU F OR YOU
– The UCT1-TM ... UniCard labeling range
includes markers for Weidmüller,
Conta-Clip, and Klemsan terminal blocks
– Labeling service: Phoenix Contact can
custom-label all UniCard markers in
accordance with your requirements
Notes:
An overview of markable terminal blocks can be found
on page 140 onwards.
1) For ordering example, see page 359. 72 markers for a terminal block width of 5 mm 60 markers for a terminal block width of 6 mm

Technical data Technical data

General data
Can be printed with: THERMOMARK CARD PLUS  THERMOMARK CARD  THERMOMARK CARD PLUS  THERMOMARK CARD 
BLUEMARK CLED  BLUEMARK LED BLUEMARK CLED  BLUEMARK LED
Number of individual labels 72 60
Number of individual labels per strip 12 10
Material PC PC
Inflammability class according to UL 94 V0 V0
Temperature range [°C] -40 ... 120 -40 ... 120
Wipe resistance DIN EN 61010-1 (VDE 0411-1) DIN EN 61010-1 (VDE 0411-1)
Components free from silicone and halogen free from silicone and halogen

Ordering data Ordering data

Pcs. / Pcs. /
Description Color Type Order No. Type Order No.
Pkt. Pkt.
UniCard, for labeling terminal block brands from other companies

white UCT1-TM 5 0829482 10 UCT1-TM 6 0829483 10

red UCT1-TM 5 RD 0829226 10 UCT1-TM 6 RD 0829232 10
orange UCT1-TM 5 OG 0829227 10 UCT1-TM 6 OG 0829233 10
yellow UCT1-TM 5 YE 0829228 10 UCT1-TM 6 YE 0829234 10
blue UCT1-TM 5 BU 0829229 10 UCT1-TM 6 BU 0829235 10
green UCT1-TM 5 GN 0829230 10 UCT1-TM 6 GN 0829236 10
UniCard, for labeling terminal block brands from other companies,
labeled acc. to customer specifications1)

white UCT1-TM 5 CUS 0829700 1 UCT1-TM 6 CUS 0829706 1

red UCT1-TM 5 RD CUS 0829701 1 UCT1-TM 6 RD CUS 0829707 1
orange UCT1-TM 5 OG CUS 0829702 1 UCT1-TM 6 OG CUS 0829708 1
yellow UCT1-TM 5 YE CUS 0829703 1 UCT1-TM 6 YE CUS 0829709 1
blue UCT1-TM 5 BU CUS 0829704 1 UCT1-TM 6 BU CUS 0829710 1
green UCT1-TM 5 GN CUS 0829705 1 UCT1-TM 6 GN CUS 0829711 1

Accessories Accessories
Magazine, for THERMOMARK CARD ...
for accommodating: UCT-TM ..., UCT1-TM ..., UCT5-TM ..., THERMOMARK CARD-UCT-MAG1 5146480 1 THERMOMARK CARD-UCT-MAG1 5146480 1
UCT-EM (5X10), UCT-EM (6X10)

128 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Marking and labeling - MARKING system
Terminal marking
UniCard marking for terminal blocks
from other manufacturers with a flat
P R I NT E D P R I NT E D
marker groove
F OR YOU F OR YOU
– The UCT1-TMF ... UniCard marking
range includes markers for Weidmüller,
Wago, ABB (entrelec), Conta-Clip, and
Klemsan terminal blocks
– Labeling service: Phoenix Contact can
custom-label all UniCard markers in ac-
cordance with your requirements
Notes:
An overview of markable terminal blocks can be found
on page 140 onwards. 72 markers for a terminal block width of 5 mm 60 markers for a terminal block width of 6 mm
1) For ordering example, see page 359.

Technical data Technical data

General data
Can be printed with: THERMOMARK CARD PLUS  THERMOMARK CARD  THERMOMARK CARD PLUS  THERMOMARK CARD 
BLUEMARK CLED  BLUEMARK LED BLUEMARK CLED  BLUEMARK LED
Number of individual labels 72 60
Number of individual labels per strip 12 10
Material PC PC
Inflammability class according to UL 94 V0 V0
Temperature range [°C] -40 ... 120 -40 ... 120
Wipe resistance DIN EN 61010-1 (VDE 0411-1) DIN EN 61010-1 (VDE 0411-1)
Components free from silicone and halogen free from silicone and halogen

Ordering data Ordering data

Pcs. / Pcs. /
Description Color Type Order No. Type Order No.
Pkt. Pkt.
UniCard, for labeling terminal block brands from other companies

white UCT1-TMF 5 0829237 10 UCT1-TMF 6 0829243 10

red UCT1-TMF 5 RD 0829238 10 UCT1-TMF 6 RD 0829244 10
orange UCT1-TMF 5 OG 0829239 10 UCT1-TMF 6 OG 0829245 10
yellow UCT1-TMF 5 YE 0829240 10 UCT1-TMF 6 YE 0829246 10
blue UCT1-TMF 5 BU 0829241 10 UCT1-TMF 6 BU 0829247 10
green UCT1-TMF 5 GN 0829242 10 UCT1-TMF 6 GN 0829248 10
UniCard, for labeling terminal block brands from other companies,
labeled acc. to customer specifications1)

white UCT1-TMF 5 CUS 0829718 1 UCT1-TMF 6 CUS 0829724 1

red UCT1-TMF 5 RD CUS 0829719 1 UCT1-TMF 6 RD CUS 0829725 1
orange UCT1-TMF 5 OG CUS 0829720 1 UCT1-TMF 6 OG CUS 0829726 1
yellow UCT1-TMF 5 YE CUS 0829721 1 UCT1-TMF 6 YE CUS 0829727 1
blue UCT1-TMF 5 BU CUS 0829722 1 UCT1-TMF 6 BU CUS 0829728 1
green UCT1-TMF 5 GN CUS 0829723 1 UCT1-TMF 6 GN CUS 0829729 1

Accessories Accessories
Plastic magazine, for THERMOMARK CARD ..., for accommo-
dating: UCT1-TMF
THERMOMARK CARD-UCT-MAG4 5146614 1 THERMOMARK CARD-UCT-MAG4 5146614 1

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 129

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Marking and labeling - MARKING system
Terminal marking
UniCard marking for terminal blocks Can be printed with:
from other manufacturers with a tall
P R I NT E D
marker groove
F OR YOU

1
2
1
2
UV
Thermal transfer for sheets UV LED technology
and cards

72 markers for a terminal block width of 5 to 6 mm

Technical data
General data
Can be printed with: THERMOMARK CARD PLUS  THERMOMARK CARD 
– The UCT2-TM 5/6 UniCard markers are BLUEMARK CLED  BLUEMARK LED
Number of individual labels 72
suitable for Wago terminal blocks Number of individual labels per strip 12
– The markers, which are supplied in uni- Material PC
form sheets, can be printed onto quickly, Inflammability class according to UL 94 V0
Temperature range [°C] -40 ... 120
easily, and precisely using the Wipe resistance DIN EN 61010-1 (VDE 0411-1)
THERMOMARK CARD and Components free from silicone and halogen
BLUEMARK CLED Ordering data
– The multi-section marking strips are easy
Pcs. /
to fit and can be easily separated if re- Description Color Type Order No.
Pkt.
quired UniCard, for labeling terminal block brands from other companies
– The markers support multiline labeling
– The sheets provide space for including white UCT2-TM 5/6 0829249 10
UniCard, for labeling terminal block brands from other companies,
function texts labeled acc. to customer specifications ) 1

– Labeling service: Phoenix Contact can

white UCT2-TM 5/6 CUS 0829250 1
custom-label all UniCard markers in ac-
cordance with your requirements Accessories
Plastic magazine, for THERMOMARK CARD ..., for accommo-
Notes: dating: UCT2-TM 
THERMOMARK CARD-UCT-MAG5 5146615 1
An overview of markable terminal blocks can be found
on page 140 onwards.
1) For ordering example, see page 359.

130 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Marking and labeling - MARKING system
Terminal marking
UniCard marking for terminal blocks
from other manufacturers with a tall
P R I NT E D P R I NT E D
marker groove
F OR YOU F OR YOU
– The UCT3-TM ... UniCard labeling range
includes markers for Wieland and
Legrand terminal blocks
– Labeling service: Phoenix Contact can
custom-label all UniCard markers in ac-
cordance with your requirements
Notes:
An overview of markable terminal blocks can be found
on page 140 onwards.
1) For ordering example, see page 359. 72 markers for a terminal block width of 5 mm 60 markers for a terminal block width of 6 mm

Technical data Technical data

General data
Can be printed with: THERMOMARK CARD PLUS  THERMOMARK CARD  THERMOMARK CARD PLUS  THERMOMARK CARD 
BLUEMARK CLED  BLUEMARK LED BLUEMARK CLED  BLUEMARK LED
Number of individual labels 72 60
Number of individual labels per strip 12 10
Material PC PC
Inflammability class according to UL 94 V0 V0
Temperature range [°C] -40 ... 120 -40 ... 120
Wipe resistance DIN EN 61010-1 (VDE 0411-1) DIN EN 61010-1 (VDE 0411-1)
Components free from silicone and halogen free from silicone and halogen

Ordering data Ordering data

Pcs. / Pcs. /
Description Color Type Order No. Type Order No.
Pkt. Pkt.
UniCard, for labeling terminal block brands from other companies

white UCT3-TM 5 0829251 10 UCT3-TM 6 0829252 10

UniCard, for labeling terminal block brands from other companies,
labeled acc. to customer specifications ) 1

white UCT3-TM 5 CUS 0829955 1 UCT3-TM 6 CUS 0829956 1

Accessories Accessories
Magazine, for THERMOMARK CARD ..., for accommodating:
UCT3-TM 
THERMOMARK CARD-UCT-MAG6 5146616 1 THERMOMARK CARD-UCT-MAG6 5146616 1

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 131

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Marking and labeling - MARKING system
Terminal marking
UniCard marking for terminal blocks Can be printed with:
from other manufacturers with a tall
P R I NT E D
marker groove
F OR YOU

1
2
1
2
UV
Thermal transfer for sheets UV LED technology
and cards

66 markers for a terminal block width of 5 mm

Technical data
General data
Can be printed with: THERMOMARK CARD PLUS  THERMOMARK CARD 
– The UCT5-TM ... UniCard labeling range BLUEMARK CLED  BLUEMARK LED
Number of individual labels 66
includes markers for Cabur terminal Number of individual labels per strip 11
blocks Material PC
– The markers, which are supplied in uni- Inflammability class according to UL 94 V0
Temperature range [°C] -40 ... 120
form sheets, can be printed onto quickly, Wipe resistance DIN EN 61010-1 (VDE 0411-1)
easily, and precisely using the Components free from silicone and halogen
THERMOMARK CARD and Ordering data
BLUEMARK CLED
Pcs. /
– The multi-section marking strips are easy Description Color Type Order No.
Pkt.
to fit and can be easily separated if re- UniCard, for labeling terminal block brands from other companies
quired
– The markers support multiline labeling white UCT5-TM 5 0828750 10
UniCard, for labeling terminal block brands from other companies,
– The sheets provide space for including labeled acc. to customer specifications ) 1

function texts
white UCT5-TM 5 CUS 0829742 1
– Labeling service: Phoenix Contact can
custom-label all UniCard markers in ac- Accessories
cordance with your requirements Magazine, for THERMOMARK CARD ...
for accommodating: UCT-TM ..., UCT1-TM ..., UCT5-TM ..., THERMOMARK CARD-UCT-MAG1 5146480 1
UCT-EM (5X10), UCT-EM (6X10)
Notes:
An overview of markable terminal blocks can be found
on page 140 onwards.
1) For ordering example, see page 359.

132 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Marking and labeling - MARKING system
Terminal marking

P R I NT E D
F OR YOU

54 markers for a terminal block width of 6 mm

Technical data

THERMOMARK CARD PLUS  THERMOMARK CARD 

BLUEMARK CLED  BLUEMARK LED
54
9
PC
V0
-40 ... 120
DIN EN 61010-1 (VDE 0411-1)
free from silicone and halogen

Ordering data

Pcs. /
Type Order No.
Pkt.

UCT5-TM 6 0828752 10

UCT5-TM 6 CUS 0829743 1

Accessories

THERMOMARK CARD-UCT-MAG1 5146480 1

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 133

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Marking and labeling - MARKING system
Terminal marking
UniCard marking for terminal blocks Can be printed with:
from other manufacturers with a flat
P R I NT E D
marker groove
F OR YOU

1
2
1
2
UV
Thermal transfer for sheets UV LED technology
and cards

72 markers for a terminal block width of

5.2 mm

Technical data
General data
Can be printed with: THERMOMARK CARD PLUS  THERMOMARK CARD 
– The UniCard UCT6M ... labeling range in- BLUEMARK CLED  BLUEMARK LED
Number of individual labels 72
cludes markers for ABB terminal blocks Number of individual labels per strip 12
– The markers, which are supplied in uni- Material PC
form sheets, can be marked quickly, pre- Inflammability class according to UL 94 V0
Temperature range [°C] -40 ... 120
cisely, and easily Wipe resistance DIN EN 61010-1 (VDE 0411-1)
– The multi-section marking strips are easy Components Free from silicone, halogen and cadmium
to fit and can be easily separated if re- Ordering data
quired
Pcs. /
– Labeling service: Phoenix Contact can Description Color Type Order No.
Pkt.
custom-label all UniCard markers in ac- UniCard, for labeling terminal block brands from other companies
cordance with your requirements
white UCT6M-TM 5 0830756 10
Notes: UniCard, for labeling terminal block brands from other companies,
labeled acc. to customer specifications ) 1
An overview of markable terminal blocks can be found
on page 140 onwards.
white UCT6M-TM 5 CUS 0830762 1
1) For ordering example, see page 359.
Accessories
Magazine, for THERMOMARK CARD ...
for accommodating: UCT-TM ..., UCT1-TM ..., UCT5-TM ..., THERMOMARK CARD-UCT-MAG1 5146480 1
UCT-EM (5X10), UCT-EM (6X10)

134 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Marking and labeling - MARKING system
Terminal marking

P R I NT E D P R I NT E D
F OR YOU F OR YOU

60 markers for a terminal block width of 42 markers for a terminal block width of
6.2 mm 8.2 mm

Technical data Technical data

THERMOMARK CARD PLUS  THERMOMARK CARD  THERMOMARK CARD PLUS  THERMOMARK CARD 
BLUEMARK CLED  BLUEMARK LED BLUEMARK CLED  BLUEMARK LED
60 42
10 7
PC PC
V0 V0
-40 ... 120 -40 ... 120
DIN EN 61010-1 (VDE 0411-1) DIN EN 61010-1 (VDE 0411-1)
Free from silicone, halogen and cadmium Free from silicone, halogen and cadmium

Ordering data Ordering data

Pcs. / Pcs. /
Type Order No. Type Order No.
Pkt. Pkt.

UCT6M-TM 6 0830757 10 UCT6M-TM 8 0830758 10

UCT6M-TM 6 CUS 0830763 1 UCT6M-TM 8 CUS 0830764 1

Accessories Accessories

THERMOMARK CARD-UCT-MAG1 5146480 1 THERMOMARK CARD-UCT-MAG1 5146480 1

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 135

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Marking and labeling - MARKING system
Terminal marking
UniCard marking for terminal blocks Can be printed with:
from other manufacturers with a tall
P R I NT E D
marker groove
F OR YOU

1
2
1
2
UV
Thermal transfer for sheets UV LED technology
and cards

72 markers for a terminal block width of

5.2 mm

Technical data
General data
Can be printed with: THERMOMARK CARD PLUS  THERMOMARK CARD 
– The UniCard UCT6R-TM ... labeling BLUEMARK CLED  BLUEMARK LED
Number of individual labels 72
range includes markers for ABB terminal Number of individual labels per strip 12
blocks Material PC
– The markers, which are supplied in uni- Inflammability class according to UL 94 V0
Temperature range [°C] -40 ... 120
form sheets, can be marked quickly, pre- Wipe resistance DIN EN 61010-1 (VDE 0411-1)
cisely, and easily Components Free from silicone, halogen and cadmium
– The multi-section marking strips are easy Ordering data
to fit and can be easily separated if re-
Pcs. /
quired Description Color Type Order No.
Pkt.
– Labeling service: Phoenix Contact can UniCard, for labeling terminal block brands from other companies
custom-label all UniCard markers in ac-
cordance with your requirements white UCT6R-TM 5 0830753 10
UniCard, for labeling terminal block brands from other companies,
labeled acc. to customer specifications ) 1
Notes:
An overview of markable terminal blocks can be found white UCT6R-TM 5 CUS 0830759 1
on page 140 onwards.
1)
Accessories
For ordering example, see page 359.
Magazine, for THERMOMARK CARD ...
for accommodating: UCT-TM ..., UCT1-TM ..., UCT5-TM ..., THERMOMARK CARD-UCT-MAG1 5146480 1
UCT-EM (5X10), UCT-EM (6X10)

136 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Marking and labeling - MARKING system
Terminal marking

P R I NT E D P R I NT E D
F OR YOU F OR YOU

60 markers for a terminal block width of 42 markers for a terminal block width of
6.2 mm 8.2 mm

Technical data Technical data

THERMOMARK CARD PLUS  THERMOMARK CARD  THERMOMARK CARD PLUS  THERMOMARK CARD 
BLUEMARK CLED  BLUEMARK LED BLUEMARK CLED  BLUEMARK LED
60 42
10 7
PC PC
V0 V0
-40 ... 120 -40 ... 120
DIN EN 61010-1 (VDE 0411-1) DIN EN 61010-1 (VDE 0411-1)
Free from silicone, halogen and cadmium Free from silicone, halogen and cadmium

Ordering data Ordering data

Pcs. / Pcs. /
Type Order No. Type Order No.
Pkt. Pkt.

UCT6R-TM 6 0830754 10 UCT6R-TM 8 0830755 10

UCT6R-TM 6 CUS 0830760 1 UCT6R-TM 8 CUS 0830761 1

Accessories Accessories

THERMOMARK CARD-UCT-MAG1 5146480 1 THERMOMARK CARD-UCT-MAG1 5146480 1

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 137

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Marking and labeling - MARKING system
Terminal marking
UniSheet marking for terminal blocks Can be printed with:
from other manufacturers
P R I NT E D
F OR YOU

1
2
1
2
Thermal transfer for sheets
and cards

12 strips with a strip width of 104 mm

Technical data
General data
Can be printed with: THERMOMARK CARD PLUS  THERMOMARK CARD
– The US2-TM 100 UniSheet markers are Number of individual labels 12
suitable for Wago terminal blocks Number of individual labels per strip 1
Material PVC
– The markers, which are supplied as uni- Inflammability class according to UL 94 V0
form cards, can be printed onto quickly, Temperature range [°C] -30 ... 70
Wipe resistance DIN EN 61010-1 (VDE 0411-1)
easily, and cost-effectively using the Components Silicone-free
THERMOMARK CARD
Ordering data
– The perforated marking strips are easy to
separate and can be easily fitted Description Color Type Order No.
Pcs. /
Pkt.
– The cards provide space for including
function texts UniSheet, for labeling terminal blocks from other manufacturers
with a Wago TopJob S terminal block groove, strip length of
– Labeling service: Phoenix Contact can 104 mm
custom-label all UniSheet markers in ac- white US2-TM 100 0829268 10
UniSheet, for labeling terminal blocks from other manufacturers
cordance with your requirements with a Wago TopJop S terminal block groove, labeled acc. to cus-
tomer specifications, strip length of 104 mm1)
Notes: white US2-TM 100 CUS 0829950 1
An overview of markable terminal blocks can be found Accessories
on page 140 onwards.
1) Magazine, for THERMOMARK CARD..., for accommodating all
For ordering example, see page 359.
US-... materials
THERMOMARK CARD-US-MAG1 5146451 1

138 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Marking and labeling - MARKING system
Terminal marking
Marker strips, continuous, for Can be printed with:
terminal blocks from other
P R I NT E D
manufacturers
F OR YOU
– The TMT2 . . . markers are suitable for
Wago terminal blocks

2
1
– The marker strips are automatically per-

1
2
forated and cut to the desired length
– The markers in the form of continuous Thermal transfer for rolls
rolls can be printed quickly, easily, and
precisely with the
THERMOMARK ROLL... printers
Notes:
Marker with strip height of 11 mm, continuous
An overview of markable terminal blocks can be found
on page 140 onwards.
1) For ordering example, see page 359.

Technical data
General data
Can be printed with: THERMOMARK ROLL  THERMOMARK ROLL X1  THERMO-
MARK X1.1  THERMOMARK X1.2  THERMOMARK S1.1
Number of individual labels 1
Number of individual labels per strip 1
Material Polyester
Inflammability class according to UL 94 V0
Temperature range [°C] -40 ... 120
Wipe resistance DIN EN 61010-1 (VDE 0411-1)
Components free from silicone and halogen

Ordering data

Pcs. /
Description Color Type Order No.
Pkt.
UniSheet, for marking terminal blocks from other manufacturers
with a Wago TopJob S terminal block groove, strip height of
11 mm, continuous
white TMT2 (EX11)R 0802683 1
UniSheet, for marking terminal blocks from other manufacturers
with a Wago TopJob S terminal block groove, labeled according
to customer specifications, strip height of 11 mm, continuous1)

white TMT2 (EX11)R CUS 0830811 1

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 139

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Marking and labeling - MARKING system
Terminal marking

Terminal marking for Weidmüller

UC1U- UC1- UC1- UC1- UCT1- UCT1- UC1- UC1- UC1- UC1- UCT1- UCT1-
TM 5 TM 5 TM 6 TM 8 TM 5 TM 6 TMF 4 TMF 5 TMF 6 TMF 8 TMF 5 TMF 6

UniCard, white 0821302 0821784 0821247 0821739 0829482 0829483 0821360 0821425 0821483 0821548 0829237 0829243

Pitch 5 5 6 8 5 6 4 5 6 8 5 6
Screw connection terminal blocks
AKZ 1,5/AKZ 2,5 5
AKZ 4/AKE 4 6
DLD(A)2,5.../MAK 2,5/VLI
6
2,5
SAK 10/16/35/95//
5
EK 10/16/35
SAK 2,5/4//EK 2,5/4 6
SAKS.../SAK 6//EK 6 8
WDK 2,5/4... 5
WDL 2,5... 6
WDT... 5
WDU (WPE) 1,5/2,5... 5
WDU (WPE) 4... 6
WDU (WPE) 6-240... 8
WF... 8
WFF... 6
WNT 2,5 5
WNT 4 6
WNT 6-WNT 70N 8
WSI 4 6
WSI 6 6
WTL 4/6 6
WTR 2,5... 5
WTR 4... 6

The pitch of the terminal block corresponds to the width of the label The pitch of the terminal block is greater than the width of the label

140 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Marking and labeling - MARKING system
Terminal marking

UC1U- UC1- UC1- UC1- UCT1- UCT1- UC1- UC1- UC1- UC1- UCT1- UCT1-
TM 5 TM 5 TM 6 TM 8 TM 5 TM 6 TMF 4 TMF 5 TMF 6 TMF 8 TMF 5 TMF 6

UniCard, white 0821302 0821784 0821247 0821739 0829482 0829483 0821360 0821425 0821483 0821548 0829237 0829243

Pitch 5 5 6 8 5 6 4 5 6 8 5 6
Spring-cage connection terminal blocks
ZDK 2,5 (PE).../ZDLD
5
2,5.../ZMAK 2,5
ZDK 4 (PE)... 6
ZDK 6/S 8
ZDL 2,5/S.../ZDL 4/S... 5
ZDT 2,5 (PE).../ZT (PE)
5
2,5.../ZP 2,5...
ZDU (ZPE) 10...-
5
ZDU (ZPE) 35/ZEI 16...
ZDU (ZPE) 2,5... 5
ZDU (ZPE) 4... 6
ZDU (ZPE) 6.../ZEI 6 8
ZNT 2,5/10/16/35... 5
ZNT 4 6
ZNT 6 8
ZPV 1,5.../ZIA 1,5.../ZVL 1,5... 5
ZSI 2,5.../ZSI 6... 5
ZSI 6-2/FC 6
ZT (PE) 4.../ZP 4... 6
ZTD 6/ZTL 6 6
ZTR 2,5.../ZDTR 2,5.../ZDL 2,5... 5

IDC terminal blocks

IDU (IPE 1,5) N.../ITR 1,5
5
N.../IDK 1,5 N(PE)...
IDU (IPE) 2,5 N.../ITR 2,5 N... 6
IT 1,5.../IEK 1,5 N (PE).../
5
IAK 1,5 N.../IIK 1,5 N...

Push-in connection terminal blocks

PDL 4... 5
PDU (PPE) 2,5/4.../PDK 2,5/4 (PE)... 5
PDU (PPE) 6/10.../
8
PDU (PPE) 16.../PEI 16...
PNT 2,5/4 5
PNT 6/10/16 8

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 141

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Marking and labeling - MARKING system
Terminal marking

Terminal marking for Wieland

UC3-TM 5 UC3-TM 6 UC3-TM 8 UCT3-TM 5 UCT3-TM 6

UniCard, white 0822369 0822385 0822408 0829251 0829252

Pitch 5 6 8 5 6
Screw connection terminal blocks
9700 A/5... 5
9700 A/6... 6
9700 A/8... 8
9700 A/10... 10
9700 A/12... 12
9700 A/16... 16
9700 A/6 ETK... 6
9700 A/8 ETK... 8
9700 A/10 ETK... 10
WK(M) 2,5... 5
WK 4..., WKI 4..., WKM 4... 6
WK 6... 8
WKN 10..., WKI 10... 10
WKN 16..., WKI 16... 12
WKN 35..., WKI 35... 16
WKN 70... 24
WKN 70... 28
9785 U/..., 9786 U/... 12

The pitch of the terminal block corresponds to the width of the label The pitch of the terminal block is greater than the width of the label

142 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Marking and labeling - MARKING system
Terminal marking

UC- UCT- UCT- UC3- UC3- UC3- UCT3- UCT3- US-TMF

UC-TM 4
TMF 4 TM 4 TMF 4 TM 5 TM 6 TM 8 TM 5 TM 6 100

UniCard, white 0818111 0818166 0828732 0828742 0822369 0822385 0822408 0829251 0829252 0829260

Pitch 4 4 4 4 5 6 8 5 6
Spring-cage connection terminal blocks
WKF 1,5... 4
WKF 1,5 KOI..., WKF
5
1,5 KOA...
WK(I)F 2,5..., WKFN
5
2,5...

WKF 4..., WKFN 4... 6

WKF 6... 8
WKF 10... 10
WK(I)F 16... 12
WKF 35... 16

Fast connection terminal blocks

WKC 1... 5
WKC 2,5... 6
WKF 16...WKC 12

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 143

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Marking and labeling - MARKING system
Terminal marking

Terminal marking for CONTA-CLIP

UC1- UC1- UC1- UCT1- UCT1- UC1- UC1- UC1- UC1- UCT1- UCT1-
TM 5 TM 6 TM 8 TM 5 TM 6 TMF 4 TMF 5 TMF 6 TMF 8 TMF 5 TMF 6

UniCard, white 0821784 0821247 0821739 0829482 0829483 0821360 0821425 0821483 0821548 0829237 0829243

Pitch 5 6 8 5 6 4 5 6 8 5 6
Spring-cage connection terminal blocks
Z(S)RK 2,5..., ZSL 2,5... 5
ZRK 4..., ZSL 4... 6

ZRK (ZSL) 6..., ZRK (ZSL)

8
10..., ZRK (ZSL) 16...

ZRKD 2,5..., ZSLD 2,5... 5

ZIKD 2,5..., ZVMAK 2,5... 5
ZTRK 2,5... 5
ZIZA 1,5... 5
ZS... 5

Push-in connection terminal blocks

FRK 1,5.../FSL 1,5... 4
FRK 2,5.../FSL 2,5... 5
FRK 4.../FSL 2,5... 6
FRKD 2,5.../FSLD 2,5... 5
FDLIS 2,5... 5
FTRK 2,5... 5
HSK... 8

The pitch of the terminal block corresponds to the width of the label The pitch of the terminal block is greater than the width of the label

144 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Marking and labeling - MARKING system
Terminal marking

UC1- UC1- UC1- UCT1- UCT1- UC1- UC1- UC1- UC1- UCT1- UCT1-
TM 5 TM 6 TM 8 TM 5 TM 6 TMF 4 TMF 5 TMF 6 TMF 8 TMF 5 TMF 6

UniCard, white 0821784 0821247 0821739 0829482 0829483 0821360 0821425 0821483 0821548 0829237 0829243

Pitch 5 6 8 5 6 4 5 6 8 5 6
Screw connection terminal blocks
RK 1,5-4... 6
RK 2,5... 5
RK 2,5-4... 6
RK 6-10.../16.../35... 8
RK 50...-RK 240... 8
SL... 5
RKD 2,5... 5
RKD 4... 6
DLI 2,5..., VMAK 2,5... 6
IK (D) 2,5... 5
TRK 1,5... 5
TK.../STK... 8
PTK... 8
SIK 10... 8
STK... 6
SK... 8
TSK 2,5 5
FF.../SF... 6
DLIS.../DLI... 6
NT... 6
RKA 2,5... 5
RKA 4... 6
RKA 10... 8
RKB 4... 5
KBL 2,5... 5
KBL 2,5-4... 6
KBL 6-10... 8

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 145

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Marking and labeling - MARKING system
Terminal marking

Terminal marking for ABB (entrelec)

UCT6M-TM 5 UCT6M-TM 6 UCT6M-TM 8

UniCard, white 0830756 0830757 0830758

Pitch 5 6 8
SNK series
ZS4... 5.2
ZS6... 6
ZS10... 8
ZS16... 10
ZS35... 16
ZS70... 22
ZS95... 26
ZS4-S-R... 6
ZS4-S-R3... 8
ZS4-S-T2-R... 6
ZS4-SP-R... 6
ZS4-SP-T2-R... 6
ZS4-SF... 6
ZS4-SF1... 8
BAM3 10
CS-R1 3
TC5... 5.2
PG5... 5.2

The pitch of the terminal block corresponds to the width of the label The pitch of the terminal block is greater than the width of the label

146 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Marking and labeling - MARKING system
Terminal marking

UC2F-TM 5 UC2F-TM 6 UC2F-TM 8

UC1-TMF 4 UC1-TMF 5 UC1-TMF 6
UCT6R-TM 5 UCT6R-TM 6 UCT6R-TM 8

UniCard, white 0822187 0822194 0822204

0821360 0821425 0821483
0830753 0830754 0830755
Pitch 5 6 8 4 5 6
Screw connection terminal blocks
M(A) 2,5/5... 5
M 4/6... 6
M 6/8 8
M 10/10, M 16/12, M 35/16, M 70/22, M
8
95/22
D 150/31..., D 240/36... 8
D 4/6 NTLP 6
MA 2,5/5.NT 5
M 4/6.NT 6
M 6/8.NT 8
M 10/10.NT, M 16/12.NT, M 35/16. 8

Spring-cage connection terminal blocks

D 1,5/4... 2 L, D 1,5/4.../4 L 4
D 2,5/5... 2 L, D 2,5/5... 3 L, D 2,5/5... 4 L 5
D 4/6... 2 L, D 4/6... 3 L, D 4/6... 4 L 6
D 6/8... 2 L 8
D 10/10... 2 L, D 16/12... 2 L, D 35/16... 2 L 8
D 2,5/5.NT.L 5
D 4/6.NT.L 6
D 6/8.NL.L 8
D 10/10.NZ.L., D 16/12.NT.L, D
8
35/16NT.L.
D 2,5/5.N... 5

IDC terminal blocks

D 1,5... ADO 5
D 1,5/6... ADO 6
D 2,5/8... ADO, D 4/8... ADO 8
D 1,5/6.NT.ADO 6
D 2,5/8.NT.ADO 8
D 2,5/5... ADO 5
D 4/6... ADO 6
D 6/8... ADO, D 6/8.ADO3 8

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 147

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Marking and labeling - MARKING system
Terminal marking

Terminal marking for Wago

UC2- UC2- UC2- UC2- UCT2- UC1- UC1- UC1- UC1- US2-TM 100/
TM 4 TM 5 TM 6 TM 8 TM 5/6 TMF 4 TMF 5 TMF 6 TMF 8 TMT 2
0829268/
UniCard, white 0821713 0821690 0821674 0821755 0829249 0821360 0821425 0821483 0821548
0802683
Pitch 4 5 6 8 5/6 4 5 6 8
Spring-cage connection terminal blocks
2001... 4
2002..., 2003... 5
2004..., 2005..., 2006... 6
2010..., 2016... 8
261..., 264... 6
270... 5
279... 4
280... 5
280-8... 5
281... 6
282..., 283..., 284..., 285... 8
290... 5
727... 6
769... 5
775..., 776..., 777... 6
780... 5
781... 6
782..., 783..., 784..., 785... 8
869..., 870..., 880... 5

The pitch of the terminal block corresponds to the width of the label The pitch of the terminal block is greater than the width of the label

148 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Marking and labeling - MARKING system
Terminal marking

Terminal marking for Cabur

UCT5-TM 5 UCT5-TM 6 UCT5-TM 5 UCT5-TM 6

UniCard, white 0828750 0828752 UniCard, white 0828750 0828752

Pitch 5 6 Pitch 5 6
Screw connection terminal blocks Screw connection terminal blocks
CBD.2 5.5 DSFA.4, DSS.4 6
CBD.4 6.5 EDM.2, TC/DIN, TC/PO 5.5
CBD.6 8 EDM.4, FDP.2, FFS.4, FVS.4 6.5
CBD.10 10 EDM.6 8
CBD.16 12 EDM.10, SFR.6 10
CBD.35 16 EDM.16, FPC.10, FPL.10 12
CBD.50 18 EDM.25 16
CBD.70 20.5 EDM.35 18.5
AFO.2/1+2, AFO.2/2+2 6.5 EDM.70 21
CBC.2 5 MPFA.4, MPS.4, RP.4 6
CBC.4 6 MPS.2/SV, MPS.2/SW, MPS.2/SWP 5.5
CBC.6 8 PDF.2, SCB.4 6.5
CBC.16 12 RN.2, TR.2 5
CBC.35 16 TR.4 7.3
GPA.70 20.5 SCB.6, SFO.4, SFR.4, SV.6 8
GPA.95 26 SV.2 5.5
GPA.150 31 SV.4 7
GPA.240 37 SV.10 10.5
TE.6 8 TDE.2, TLD.2, TLE.2, TLS.2 6.2
TE.10 10 VPC.2, VPD.2 5.08
TE.16 12
TE.35 16 Spring-cage connection terminal blocks
TED.4 6.5 HCD.1 5.08
TEO.2 5.5
TEO.4 6.5 Push-in connection terminal blocks
TEC.6 8 NCS, NCV 6.2
TEC.10 10
TEC.16 12
TEC.35 16
TEC.70 20.5
CBE.2, CBR.2, CVF.2 5
CVF.4, DAS.4 6
DBC.2 5
The pitch of the terminal block corresponds to the width of the label The pitch of the terminal block is greater than the width of the label

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 149

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Marking and labeling - MARKING system
Terminal marking

Terminal marking for Klemsan

UC1U- UC1- UC1- UC1- UCT1- UCT1- UC1- UC1- UC1- UC1- UCT1- UCT1-
TM 5 TM 5 TM 6 TM 8 TM 5 TM 6 TMF 4 TMF 5 TMF 6 TMF 8 TMF 5 TMF 6

UniCard, white 0821302 0821784 0821247 0821739 0829482 0829483 0821360 0821425 0821483 0821548 0829237 0829243

Pitch 5 5 6 8 5 6 4 5 6 8 5 6
Screw connection terminal blocks
AVK 2,5/PEK 2,5
5
K/WGT 2,5
AVK 4.../AVK
2,5/4T/PEK 2,5/PEK 6
4/WGT 4
AVK 6-240/
8
PEK 6-35
AVK 6/10T-16/35T//
8
WGT, 6/WGT 10
PIK 2,5... 5
PIK 4... 6
PIK 3... 6
ASK 2 8
ASK 3 6
ASK 4/AVK 4 FS 8
ASK 4S/ASK 4 LD 6
WGO... 8
AYK 4... 6
AYK 10... 8
MVK 2,5 (T) 5
MVK 4 (T) 6

Spring-cage connection terminal blocks

YBK 2,5 (T) 5
YBK 4 (T) 6
YBK 6 (T)
8
YBK 10 (T)
MYK 2,5 (T).../MYP-
5
PK 2,5...

YBK 2,5 F.../YBK 3... 5

YBK 4... 6
YBK S.../YBK I... 8
YBK 2,5
A.../YBK 2,5 E.../YB 5
K 2,5C...
PCY 2,5... 5
The pitch of the terminal block corresponds to the width of the label The pitch of the terminal block is greater than the width of the label

150 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Marking and labeling - MARKING system
Terminal marking

Terminal marking for Legrand

UC3-TM 5 UC3-TM 6 UC3-TM 8

UniCard, white 0822369 0822385 0822408

Pitch 5 6 8
Screw connection terminal blocks, Viking 2
39060 5
39061-39068 6
39070 6
39077 5
39078, 39080, 39082 6
39084, 39085 6
39300 5
39301-39305 6
39307 6
39370 5
39371, 39372, 39374 6
39376, 39378 6

Spring-cage connection terminal blocks, Viking 3

39601, 39602 5
39604 6
39605 8
39606, 39607 8
39608 6
39627 5
39628, 39636 6
39611, 39612 5
39614 6
39615 8
39616, 39617 8
39618, 39646 6
39621 5
39624 6
39625 8
39626, 39629 8
39622 5
39630, 39666 6

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 151

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
152 PHOENIX CONTACT
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Conductor and cable marking - MARKING system

Clear and permanent marking of all con-    

Product range overview  
ductors and cables considerably improves
transparency in control cabinets and switch-    
Conductor and cable marking 154
gear. It makes assembly and maintenance
work easier and assists in rectifying faults.    
Phoenix Contact conductor and cable Overview of conductor markers and cable markers 156
markers provide the ideal marking option   The right marking solution for every diameter   
for any application. Just select an assembly    
method. The markers can be threaded on, WMTB AL aluminum conductor and cable marking 161
clipped on, adhered in place or secured with
cable binders.
   
UniCard UC-WM... and UCT-WM... conductor and  
cable marking

  Clip-on and slide-on markers, for insertion into marking collars, 162 
for assembly with cable binders, for threading

   
UniSheet US-WM... conductor and cable marking  

  Markers for insertion into marking collars, for assembly with ca- 188 
ble binders, adhesive markers for wrapping around

   
WM... conductor and cable marking supplied in rolls

  Adhesive markers for wrapping around or as flags 193 

   
WMS shrink sleeves supplied in rolls 200

   
EMT and WMT... conductor and cable marking supplied  
in rolls

  Markers for insertion into marking collars, for threading, for as- 208 
sembly with cable binders

   
KMK cable markers for assembly with cable binders 214

   
Cable markers for carrier assembly  

  Markers made of plastic and stainless steel 221 

   
PATG and PATO marking collars 224

   
Ordering example for labeling service - printed for you 359

PHOENIX CONTACT 153

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Marking and labeling - MARKING system
Conductor and cable marking

Far from being a luxury, standard-compli- – THERMOMARK CARD, thermal transfer The CLIP PROJECT software is available
ant and permanent conductor markings are printer for labeling UniCard and UniSheet for easy and efficient production of mark-
actually a mark of quality demanded by cus- formats ings. It generates the marking data directly
tomers in respect of modern high-quality – THERMOMARK ROLL, thermal transfer from the circuit diagram and automatically
capital goods. Phoenix Contact conductor printer for labeling material off the roll sends the data to the relevant printers for
and cable marking systems provide ideal and continuous media further processing.
marking options for any user, whether they – THERMOMARK ROLL X1, thermal If no printers are available or your produc-
intend to thread, slide, clip or stick the transfer printer for large quantities tion facility is affected by capacity bottle-
markers on or attach them with cable bind- – THERMOMARK W2, thermal transfer necks, you also have the option of using our
ers. printer for double-sided labeling and per- labeling service. We will be happy to handle
Depending on the material, the following foration of continuous shrink sleeves your printing orders, including any engraving
printers can be used for the individual label- – CMS-P1-PLOTTER or laser marking of stainless steel cable
ing of conductor and cable markers: – Commercially available desktop laser markers.
– BLUEMARK CLED, high-speed printer printers
with UV technology for labeling UniCard
formats

154 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Marking and labeling - MARKING system
Conductor and cable marking

Conductor and cable marking can be op- Clip-on conductor markers feature two Individual printed markers are threaded
timally labeled with aluminum markers. The non-detachable labeling areas that remain onto conductors or attached by means of
markers are quickly and easily printed with legible at all times. They can be clipped onto cable binders. Various materials can be
an optimum printing quality using the pre-wired conductors and cables manually. supplied as cards or on rolls.
BLUEMARK CLED. They are easily
attached using cable binders.

The ferrules feature an insulating collar Conductors can be fitted with PATG and Shrink sleeves are ideal for captive mark-
that supports labeling and are labeled prior PATO marking collars. Marking is achieved by ing of cables and conductors. They are avail-
to crimping. This combines two operations means of insert strips that support labeling. able prefabricated and in rolls.
in one.

Conductor markers can be fitted using ca- Cable marker labels consist of a labeling Plastic cable markers are suitable for both
ble binders almost regardless of conductor field and a transparent foil that protects the bundling and labeling conductors and cables.
or cable diameter. The large marking area labeling against abrasion and dirt. The labels A screw cap protects the labeling against
provides enough space for long labels. are available in various shapes and sizes. dirt and can be replaced at any time.

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 155

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Marking and labeling - MARKING system
Conductor and cable marking

Overview of conductor and cable marking

Markers for marking with BLUEMARK..., y

THERMOMARK... or plotters
123
UV UV x UV

Ferrules
Aluminum labels Conductor clips
(dimensions in mm²)

Page 161 Page 162 Page 175

WMTB-AL (40X15)

WMTB-AL (60X15)
WMTB-AL (29X8)

AI-WM 0,75-8 GY
AI-WM 0,5-8 WH

AI-WM 1,5-8 WH
WMTB-AL (D30)

UC-WMCO 1,6...

UC-WMCO 2,1...

UC-WMCO 2,9...

UC-WMCO 3,6...

UC-WMCO 4,9...

AI-WM 2,5-8 BU
UC-WMC 1,9...

UC-WMC 3,1...

UC-WMC 4,4...

UC-WMC 5,6...

UC-WMC 7,5...

AI-WM 1-8 RD
Conductor diameter
[mm]

0.5

0.5 0.75 1.0 1.5 2.5

1.0

1.5 1.2 1.3

1.6
2.0 1.9 1.6
2.1
1.9
2.5 2.1
>2.4
3.0 2.9
3.1
> 2.9 2.8 2.9
3.5
3.6
4.0 3.6

4.5 4.4 4.2

5.0 > 4.6 > 4.6 4.9

5.5 5.0
5.6

6.0

7.0

7.5
8.0

9.0

10.0

12.0

14.0

16.0

18.0

20.0

22.0

24.0

26.0

28.0

30.0

35.0

40.0

45.0

50.0
>50 > 50 > 50 > 50

156 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Marking and labeling - MARKING system
Conductor and cable marking

y y

2
1
1
2

1
2
123 123

1
2
x x

1
2

2
UV UV UV

Conductor markers
Marking collars
in conjunction with UC-WMT ... / EMT ..../ US-WMT .../ WMTW ... / UCT-WMT...
for assembly with cable binders for threading on

Page 179 Page 186 Page 224

UC-WMTBA (60x11)...
UC-WMTBA (24x5)...

UC-WMTBA (29x8)...

UCT-WMS 3,2...

UCT-WMS 4,7...
UC-WMTB ...

PATO 1/...

PATO 2/...

PATO 3/...

PATO 4/...
PATG 0/...

PATG 1/...

PATG 2/...

PATG 3/...

PATG 4/...

PATG 5/...

PATG 6/...

PATG 7/...

PATG 8/...

PATG 9/...

PAB-KTL
0.6
1.2

1.5 1.5

2.0 2.0
2.5

2.5
3.2 2.8

3.5

4.0
4.0 4.0
4.4
4.7

6.0 6.0 6.0 > 6.0

7.0
6.7 6.7
7.0
8.0

10.0 10.0
10.0

14.0
14.0

22.0
22.0

30.0
30.0
35.0
35.0

45.0

> 50 > 50 > 50 > 50 > 50

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 157

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Marking and labeling - MARKING system
Conductor and cable marking

Overview of conductor and cable marking

Markers for marking with THERMOMARK...
or laser printers

2
1
1
2

1
2
1
2
1

1
2

2
Cable markers
Cable marker labels
for threading on

Page 190 Page 194

WML 6... / US-WML 6...

WML 36... / US-WML 36...

WML 14... / US-WML
US-WMTB (44X15)
US-WMTB (24X5)

US-WMTB (29X8)
Conductor diameter
[mm]

WML 7,5...

WML 12...

WML 18...

WML 22...

WML 46...
WML 3...

WML 5...

14...
0.5

1.0

1.5

2.0

2.5 2.0 2.0

3.0 3.0 2.5

3.5 3.0 3.0

4.0

4.5 > 4.0

5.0 5.0

5.5 5.0 5.0

6.0 6.0

7.0
7.5
8.0 7.0

9.0

10.0

12.0 12.0
11.0 11.0
14.0 14.0
> 13.0 > 13.0
16.0

18.0 18.0

20.0

22.0 22.0

24.0

26.0

28.0

30.0

35.0
36.0

40.0

45.0
46.0
50.0 > 50 > 50 > 50

158 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Marking and labeling - MARKING system
Conductor and cable marking

2
1

1
1
2

1
2
1

1
2

2
3

1
2

2
2
1

Conductor markers for threading on/ Plastic cable markers

Shrink sleeve
for cable binder fixing in conjunction with US-EMP .../ ESL .../ EMT ...

Page 200 Page 210 Page 214

WMTB ... / US-WMTB ...

WMS 12,7...

WMS 19,1...

WMS 25,4...

WMS 38,1...

WMS 50,8...

WMT 2,4...

WMT 3,5...

WMT 4,2...

WMT 5,5...

WMT 8,4...
WMS 2,4...

WMS 3,2...

WMS 4,8...

WMS 6,4...

WMS 9,5...

KMK 1

KMK 2

KMK 3

KMK 4

KMK 5
KMK
0.5 0.5 0.5 0.5 0.5

0.8 1.0
1.0

1.6
2.4 2.4 2.0
2.1

3.2
3.0
3.5
3.2

4.2
4.0

4.8 4.2

5.0
5.5

6.4

6.4
8.4

9.5 8.5

10.0

12.7

12.7

16.0

19.1 16.9

25.4 25.0

35.0

38.1

50.8 > 50 > 50 > 50 > 50 > 50

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 159

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Marking and labeling - MARKING system
Conductor and cable marking
Aluminum cable marking for
assembly with cable binders

UV
UV LED technology

General data
Can be printed with:
The aluminum WMTB-AL product – The circular WMTB-AL (D30) markers Material
range is characterized by: can be used for the most diverse applica- Wipe resistance
Components
– High-quality appearance tions
– Easy assembly with cable binders – Labeling service: Phoenix Contact can
– Suitable for large-surface marking of con- custom-label all markers according to Description Color
ductors and cables > 2.9 mm in diameter your requirements
Aluminum label for assembly with cable binders, unmarked

Lettering field size: 29 x 8 mm, > 2.9 mm aluminum

Lettering field size: 40 x 15 mm, > 4.6 mm aluminum
Lettering field size: 60 x 15 mm, > 4.6 mm aluminum
Aluminum label for assembly with cable binders, labeled
according to customer specifications1)

Lettering field size: 29 x 8 mm aluminum

Lettering field size: 40 x 15 mm aluminum
Lettering field size: 60 x 15 mm aluminum
Aluminum label, round, for assembly with cable binders

Diameter: 30 mm aluminum

Aluminum label, round, for assembly with cable binders,
labeled according to customer specifications1)

Diameter: 30 mm aluminum

Magazine, for BLUEMARK printer, for accommodating aluminum

labels
for WMTB-AL (29X8)
for WMTB-AL (40X15)
for WMTB-AL (60X15)
Magazine, for BLUEMARK printer, for accommodating aluminum
labels
for WMTB-AL (D30)

– The markers can be labeled quickly, easily, and – In conjunction with magazines, optimum
cost-effectively with the BLUEMARK CLED printing accuracy is guaranteed
– By using modern UV LED printing tech-
nology, a highly resistant and optimum
printing quality can be achieved, which is
resistant to solvents and suitable for use
even under harsh industrial conditions Notes:
For corresponding stainless steel cable binders, see page 580.
1) For ordering example, see page 359.

160 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Marking and labeling - MARKING system
Conductor and cable marking

P R I NT E D P R I NT E D
F OR YOU F OR YOU

Technical data Technical data

BLUEMARK CLED BLUEMARK CLED

Aluminum Aluminum
DIN EN 61010-1 (VDE 0411-1) DIN EN 61010-1 (VDE 0411-1)
Free from silicone, halogen and cadmium Free from silicone, halogen and cadmium

Ordering data Ordering data

Pcs. / Pcs. /
Type Order No. Type Order No.
Pkt. Pkt.

WMTB-AL (29X8) 0830805 90

WMTB-AL (40X15) 0830524 45
WMTB-AL (60X15) 0830525 45

WMTB-AL (29X8) CUS 0830807 1

WMTB-AL (40X15) CUS 0830526 1
WMTB-AL (60X15) CUS 0830527 1

WMTB-AL (D30) 0830804 90

WMTB-AL (D30) CUS 0830806 1

Accessories Accessories

BLUEMARK MAG WM-M (29X8) 0802743 1

BLUEMARK MAG WM-M (40X15) 0802744 1
BLUEMARK MAG WM-M (60X15) 0802746 1

BLUEMARK MAG WM-M (D30) 0802747 1

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 161

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Marking and labeling - MARKING system
Conductor and cable marking
Clip-on UniCard conductor marking Can be printed with:
P R I NT E D
F OR YOU

y
123
UV x
UV LED technology Plotter

20 markers for conductor diameters

from 1.2 to 1.9 mm,
lettering field size: 15 x 4 mm

Technical data
General data
Can be printed with: BLUEMARK CLED  BLUEMARK LED  CMS-P1-PLOTTER
– The UC-WMC ... UniCard labeling range Number of individual labels 20
includes markers for captive labeling of Number of individual labels per strip 4
Material PA
control cables right through to light plas- Inflammability class according to UL 94 V2
tic-sheathed cables with large diameters Temperature range [°C] -40 ... 120
Wipe resistance DIN EN 61010-1 (VDE 0411-1)
– The markers, which are supplied in uni- Components free from silicone and halogen
form sheets, can be printed onto quickly Conductor diameter range [mm] 1.2 ... 1.9
and easily using the BLUEMARK CLED Conductor cross section range [mm2] 0.25 ... 0.34
Conductor cross section range AWG 24 ... 22
– The format automatically ensures printing
with a high level of positional accuracy Ordering data
– Can be clipped on even after wiring has Pcs. /
Description Color Type Order No.
been completed Pkt.

– One-handed assembly UniCard, for subsequent labeling of conductors

– Two labeling areas that are clearly legible white UC-WMC 1,9 (15X4) 0828004 10
at all times red UC-WMC 1,9 (15X4) RD 0828006 10
– The markers support multiline labeling orange UC-WMC 1,9 (15X4) OG 0828007 10
yellow UC-WMC 1,9 (15X4) YE 0828008 10
– The sheets provide space for including violet UC-WMC 1,9 (15X4) VT 0828009 10
function texts blue UC-WMC 1,9 (15X4) BU 0828010 10
UniCard, for subsequent labeling of conductors,
– Labeling service: Phoenix Contact can labeled acc. to customer specifications1)
custom-label all UniCard markers in ac-
white UC-WMC 1,9 (15X4) CUS 0828012 1
cordance with your requirements red UC-WMC 1,9 (15X4) RD CUS 0828013 1
orange UC-WMC 1,9 (15X4) OG CUS 0828014 1
Notes:
yellow UC-WMC 1,9 (15X4) YE CUS 0828015 1
For more variants, see www.phoenixcontact.net/products. violet UC-WMC 1,9 (15X4) VT CUS 0828016 1
1) For ordering example, see page 359. blue UC-WMC 1,9 (15X4) BU CUS 0828017 1

Accessories
Magazine, for CMS-P1-PLOTTER
P1 UC-MAG 1 5146079 1

162 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Marking and labeling - MARKING system
Conductor and cable marking

P R I NT E D
F OR YOU

12 markers for conductor diameters

from 1.2 to 1.9 mm,
30 x 4 mm marking field

Technical data

BLUEMARK CLED  BLUEMARK LED  CMS-P1-PLOTTER

12
4
PA
V2
-40 ... 120
DIN EN 61010-1 (VDE 0411-1)
free from silicone and halogen
1.2 ... 1.9
0.25 ... 0.34
24 ... 22

Ordering data

Pcs. /
Type Order No.
Pkt.

UC-WMC 1,9 (30X4) 0830283 10

UC-WMC 1,9 (30X4) CUS 0830284 1

Accessories

P1 UC-MAG 1 5146079 1

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 163

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Marking and labeling - MARKING system
Conductor and cable marking
Clip-on UniCard conductor marking Can be printed with:
P R I NT E D
F OR YOU

y
123
UV x
UV LED technology Plotter

20 markers for conductor diameters

from 1.9 to 3.1 mm,
lettering field size: 15 x 4 mm

Technical data
General data
Can be printed with: BLUEMARK CLED  BLUEMARK LED  CMS-P1-PLOTTER
– The UC-WMC ... UniCard labeling range Number of individual labels 20
includes markers for captive labeling of Number of individual labels per strip 4
Material PA
control cables right through to light plas- Inflammability class according to UL 94 V2
tic-sheathed cables with large diameters Temperature range [°C] -40 ... 120
Wipe resistance DIN EN 61010-1 (VDE 0411-1)
– The markers, which are supplied in uni- Components free from silicone and halogen
form sheets, can be printed onto quickly Conductor diameter range [mm] 1.9 ... 3.1
and easily using the BLUEMARK CLED Conductor cross section range [mm2] 0.5 ... 1.5
Conductor cross section range AWG 20 ... 16
– The format automatically ensures printing
with a high level of positional accuracy Ordering data
– Can be clipped on even after wiring has Pcs. /
Description Color Type Order No.
been completed Pkt.

– One-handed assembly UniCard, for subsequent labeling of conductors

– Two labeling areas that are clearly legible white UC-WMC 3,1 (15X4) 0818205 10
at all times red UC-WMC 3,1 (15X4) RD 0818755 10
– The markers support multiline labeling orange UC-WMC 3,1 (15X4) OG 0818726 10
yellow UC-WMC 3,1 (15X4) YE 0818739 10
– The sheets provide space for including violet UC-WMC 3,1 (15X4) VT 0825370 10
function texts blue UC-WMC 3,1 (15X4) BU 0818742 10
UniCard, for subsequent labeling of conductors, labeled acc. to
– Labeling service: Phoenix Contact can customer specifications
custom-label all UniCard markers in ac- white UC-WMC 3,1 (15X 4) CUS 0824692 1
cordance with your requirements red UC-WMC 3,1 (15X 4) RD CUS 0824696 1
orange UC-WMC 3,1 (15X 4) OG CUS 0824695 1
Notes: yellow UC-WMC 3,1 (15X 4) YE CUS 0824697 1
violet UC-WMC 3,1 (15X4) VT CUS 0826773 1
For more variants, see www.phoenixcontact.net/products. blue UC-WMC 3,1 (15X 4) BU CUS 0824693 1

Accessories
Magazine, for CMS-P1-PLOTTER
P1 UC-MAG 1 5146079 1

164 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Marking and labeling - MARKING system
Conductor and cable marking

P R I NT E D P R I NT E D
F OR YOU F OR YOU

12 markers for conductor diameters 12 markers for conductor diameters

from 1.9 to 3.1 mm, from 1.9 to 3.1 mm,
lettering field size: 23 x 4 mm lettering field size: 30 x 4 mm

Technical data Technical data

BLUEMARK CLED  BLUEMARK LED  CMS-P1-PLOTTER BLUEMARK CLED  BLUEMARK LED  CMS-P1-PLOTTER
12 12
4 4
PA PA
V2 V2
-40 ... 120 -40 ... 120
DIN EN 61010-1 (VDE 0411-1) DIN EN 61010-1 (VDE 0411-1)
free from silicone and halogen free from silicone and halogen
1.9 ... 3.1 1.9 ... 3.1
0.5 ... 1.5 0.5 ... 1.5
20 ... 16 20 ... 16

Ordering data Ordering data

Pcs. / Pcs. /
Type Order No. Type Order No.
Pkt. Pkt.

UC-WMC 3,1 (23X4) 0818218 10 UC-WMC 3,1 (30X4) 0819631 10

UC-WMC 3,1 (23X4) RD 0818807 10 UC-WMC 3,1 (30X4) RD 0820769 10
UC-WMC 3,1 (23X4) OG 0818771 10 UC-WMC 3,1 (30X4) OG 0823863 10
UC-WMC 3,1 (23X4) YE 0818784 10 UC-WMC 3,1 (30X4) YE 0819644 10
UC-WMC 3,1 (23X4) VT 0825371 10 UC-WMC 3,1 (30X4) VT 0825372 10
UC-WMC 3,1 (23X4) BU 0818797 10 UC-WMC 3,1 (30X4) BU 0820756 10

UC-WMC 3,1 (23X 4) CUS 0824704 1 UC-WMC 3,1 (30X4) CUS 0824716 1
UC-WMC 3,1 (23X 4) RD CUS 0824708 1 UC-WMC 3,1 (30X4) RD CUS 0824723 1
UC-WMC 3,1 (23X 4) OG CUS 0824707 1 UC-WMC 3,1 (30X4) OG CUS 0824722 1
UC-WMC 3,1 (23X 4) YE CUS 0824709 1 UC-WMC 3,1 (30X4) YE CUS 0824717 1
UC-WMC 3,1 (23X4) VT CUS 0826775 1 UC-WMC 3,1 (30X4) VT CUS 0826777 1
UC-WMC 3,1 (23X 4) BU CUS 0824705 1 UC-WMC 3,1 (30X4) BU CUS 0824720 1

Accessories Accessories

P1 UC-MAG 1 5146079 1 P1 UC-MAG 1 5146079 1

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 165

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Marking and labeling - MARKING system
Conductor and cable marking
Clip-on UniCard conductor marking Can be printed with:
P R I NT E D
F OR YOU

y
123
UV x
UV LED technology Plotter

15 markers for conductor diameters

from 2.8 to 4.4 mm,
lettering field size: 15 x 5.5 mm

Technical data
General data
Can be printed with: BLUEMARK CLED  BLUEMARK LED  CMS-P1-PLOTTER
– The UC-WMC ... UniCard labeling range Number of individual labels 15
includes markers for captive labeling of Number of individual labels per strip 3
Material PA
control cables right through to light plas- Inflammability class according to UL 94 V2
tic-sheathed cables with large diameters Temperature range [°C] -40 ... 120
Wipe resistance DIN EN 61010-1 (VDE 0411-1)
– The markers, which are supplied in uni- Components free from silicone and halogen
form sheets, can be printed onto quickly Conductor diameter range [mm] 2.8 ... 4.4
and easily using the BLUEMARK CLED Conductor cross section range [mm2] 1.5 ... 4
Conductor cross section range AWG 16 ... 12
– The format automatically ensures printing
with a high level of positional accuracy Ordering data
– Can be clipped on even after wiring has Pcs. /
Description Color Type Order No.
been completed Pkt.

– One-handed assembly UniCard, for subsequent labeling of conductors

– Two labeling areas that are clearly legible white UC-WMC 4,4 (15X5,5) 0818182 10
at all times red UC-WMC 4,4 (15X5,5) RD 0818852 10
– The markers support multiline labeling orange UC-WMC 4,4 (15X5,5) OG 0818823 10
yellow UC-WMC 4,4 (15X5,5) YE 0818836 10
– The sheets provide space for including violet UC-WMC 4,4 (15X5,5) VT 0825373 10
function texts blue UC-WMC 4,4 (15X5,5) BU 0818849 10
green UC-WMC 4,4 (15X5,5) GN 0818865 10
– Labeling service: Phoenix Contact can UniCard, for subsequent labeling of conductors, labeled acc. to
custom-label all UniCard markers in customer specifications1)
accordance with your requirements white UC-WMC 4,4 (15X 5,5) CUS 0824728 1
red UC-WMC 4,4 (15X 5,5) RD CUS 0824732 1
Notes:
orange UC-WMC 4,4 (15X 5,5) OG CUS 0824731 1
1) For ordering example, see page 359. yellow UC-WMC 4,4 (15X 5,5) YE CUS 0824733 1
violet UC-WMC 4,4 (15X5,5) VT CUS 0826779 1
blue UC-WMC 4,4 (15X 5,5) BU CUS 0824729 1
green UC-WMC 4,4 (15X 5,5) GN CUS 0824730 1

Accessories
Magazine, for CMS-P1-PLOTTER
P1 UC-MAG 2 5146082 1

166 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Marking and labeling - MARKING system
Conductor and cable marking

P R I NT E D P R I NT E D
F OR YOU F OR YOU

9 markers for conductor diameters 9 markers for conductor diameters

from 2.8 to 4.4 mm, from 2.8 to 4.4 mm,
lettering field size: 23 x 5.5 mm lettering field size: 30 x 5.5 mm

Technical data Technical data

BLUEMARK CLED  BLUEMARK LED  CMS-P1-PLOTTER BLUEMARK CLED  BLUEMARK LED  CMS-P1-PLOTTER
9 9
3 3
PA PA
V2 V2
-40 ... 120 -40 ... 120
DIN EN 61010-1 (VDE 0411-1) DIN EN 61010-1 (VDE 0411-1)
free from silicone and halogen free from silicone and halogen
2.8 ... 4.4 2.8 ... 4.4
1.5 ... 4 1.5 ... 4
16 ... 12 16 ... 12

Ordering data Ordering data

Pcs. / Pcs. /
Type Order No. Type Order No.
Pkt. Pkt.

UC-WMC 4,4 (23X5,5) 0818195 10 UC-WMC 4,4 (30X5,5) 0819657 10

UC-WMC 4,4 (23X5,5) RD 0818904 10 UC-WMC 4,4 (30X5,5) RD 0820882 10
UC-WMC 4,4 (23X5,5) OG 0818878 10 UC-WMC 4,4 (30X5,5) OG 0823944 10
UC-WMC 4,4 (23X5,5) YE 0818881 10 UC-WMC 4,4 (30X5,5) YE 0819660 10
UC-WMC 4,4 (23X5,5) VT 0825374 10 UC-WMC 4,4 (30X5,5) VT 0825375 10
UC-WMC 4,4 (23X5,5) BU 0818894 10 UC-WMC 4,4 (30X5,5) BU 0820879 10
UC-WMC 4,4 (23X5,5) GN 0818917 10 UC-WMC 4,4 (30X5,5) GN 0823957 10

UC-WMC 4,4 (23X 5,5) CUS 0824740 1 UC-WMC 4,4 (30X 5,5) CUS 0824752 1
UC-WMC 4,4 (23X 5,5) RD CUS 0824744 1 UC-WMC 4,4 (30X5,5) RD CUS 0824759 1
UC-WMC 4,4 (23X 5,5) OG CUS 0824743 1 UC-WMC 4,4 (30X5,5) OG CUS 0824758 1
UC-WMC 4,4 (23X 5,5) YE CUS 0824745 1 UC-WMC 4,4 (30X 5,5) YE CUS 0824753 1
UC-WMC 4,4 (23X5,5) VT CUS 0826781 1 UC-WMC 4,4 (30X5,5) VT CUS 0826783 1
UC-WMC 4,4 (23X 5,5) BU CUS 0824741 1 UC-WMC 4,4 (30X5,5) BU CUS 0824756 1
UC-WMC 4,4 (23X 5,5) GN CUS 0824742 1 UC-WMC 4,4 (30X5,5) GN CUS 0824757 1

Accessories Accessories

P1 UC-MAG 2 5146082 1 P1 UC-MAG 2 5146082 1

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 167

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Marking and labeling - MARKING system
Conductor and cable marking
Clip-on UniCard conductor marking Can be printed with:
P R I NT E D
F OR YOU

y
123
UV x
UV LED technology Plotter

6 markers for conductor diameters

from 4.2 to 5.6 mm,
lettering field size: 23 x 8 mm

Technical data
General data
Can be printed with: BLUEMARK CLED  BLUEMARK LED  CMS-P1-PLOTTER
– The UC-WMC ... UniCard labeling range Number of individual labels 6
includes markers for captive labeling of Number of individual labels per strip 2
Material PA
control cables right through to light plas- Inflammability class according to UL 94 V2
tic-sheathed cables with large diameters Temperature range [°C] -40 ... 120
Wipe resistance DIN EN 61010-1 (VDE 0411-1)
– The markers, which are supplied in uni- Components free from silicone and halogen
form sheets, can be printed onto quickly Conductor diameter range [mm] 4.2 ... 5.6
and easily using the BLUEMARK CLED Conductor cross section range [mm2] 4 ... 10
Conductor cross section range AWG 12 ... 10
– The format automatically ensures printing
with a high level of positional accuracy Ordering data
– Can be clipped on even after wiring has Pcs. /
Description Color Type Order No.
been completed Pkt.

– One-handed assembly UniCard, for subsequent labeling of conductors

– Two labeling areas that are clearly legible white UC-WMC 5,6 (23X8) 0825382 5
at all times red UC-WMC 5,6 (23X8) RD 0825387 5
– The markers support multiline labeling orange UC-WMC 5,6 (23X8) OG 0825385 5
yellow UC-WMC 5,6 (23X8) YE 0825386 5
– The sheets provide space for including violet UC-WMC 5,6 (23X8) VT 0825388 5
function texts blue UC-WMC 5,6 (23X8) BU 0825383 5
green UC-WMC 5,6 (23X8) GN 0825384 5
– Labeling service: Phoenix Contact can UniCard, for subsequent labeling of conductors, labeled acc. to
custom-label all UniCard markers in customer specifications1)
accordance with your requirements white UC-WMC 5,6 (23X8) CUS 0827005 1
red UC-WMC 5,6 (23X8) RD CUS 0827009 1
Notes:
orange UC-WMC 5,6 (23X8) OG CUS 0827008 1
1) For ordering example, see page 359. yellow UC-WMC 5,6 (23X8) YE CUS 0827011 1
violet UC-WMC 5,6 (23X8) VT CUS 0827010 1
blue UC-WMC 5,6 (23X8) BU CUS 0827006 1
green UC-WMC 5,6 (23X8) GN CUS 0827007 1

Accessories
Magazine, for CMS-P1-PLOTTER
P1 UC-MAG 3 5146095 1

168 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Marking and labeling - MARKING system
Conductor and cable marking

P R I NT E D P R I NT E D P R I NT E D
F OR YOU F OR YOU F OR YOU

6 markers for conductor diameters 6 markers for conductor diameters 6 markers for conductor diameters
from 4.2 to 5.6 mm, from 5 to 7.5 mm, from 5 to 7.5 mm,
lettering field size: 30 x 8 mm lettering field size: 23 x 8 mm lettering field size: 30 x 8 mm

Technical data Technical data Technical data

BLUEMARK CLED  BLUEMARK LED  CMS-P1-PLOTTER BLUEMARK CLED  BLUEMARK LED  CMS-P1-PLOTTER BLUEMARK CLED  BLUEMARK LED  CMS-P1-PLOTTER
6 6 6
2 2 2
PA PA PA
V2 V2 V2
-40 ... 120 -40 ... 120 -40 ... 120
DIN EN 61010-1 (VDE 0411-1) DIN EN 61010-1 (VDE 0411-1) DIN EN 61010-1 (VDE 0411-1)
free from silicone and halogen free from silicone and halogen free from silicone and halogen
4.2 ... 5.6 5 ... 7.5 5 ... 7.5
4 ... 10 6 ... 16 6 ... 16
12 ... 10 10 ... 6 10 ... 6

Ordering data Ordering data Ordering data

Pcs. / Pcs. / Pcs. /

Type Order No. Type Order No. Type Order No.
Pkt. Pkt. Pkt.

UC-WMC 5,6 (30X8) 0825396 5 UC-WMC 7,5 (23X8) 0818179 5 UC-WMC 7,5 (30X8) 0819673 5
UC-WMC 5,6 (30X8) RD 0825401 5 UC-WMC 7,5 (23X8) RD 0819039 5 UC-WMC 7,5 (30X8) RD 0820963 5
UC-WMC 5,6 (30X8) OG 0825399 5 UC-WMC 7,5 (23X8) OG 0818920 5 UC-WMC 7,5 (30X8) OG 0823724 5
UC-WMC 5,6 (30X8) YE 0825400 5 UC-WMC 7,5 (23X8) YE 0818933 5 UC-WMC 7,5 (30X8) YE 0819686 5
UC-WMC 5,6 (30X8) VT 0825402 5 UC-WMC 7,5 (23X8) VT 0825376 5 UC-WMC 7,5 (30X8) VT 0825377 5
UC-WMC 5,6 (30X8) BU 0825397 5 UC-WMC 7,5 (23X8) BU 0818946 5 UC-WMC 7,5 (30X8) BU 0820950 5
UC-WMC 5,6 (30X8) GN 0825398 5 UC-WMC 7,5 (23X8) GN 0818959 5 UC-WMC 7,5 (30X8) GN 0823708 5

UC-WMC 5,6 (30X8) CUS 0827012 1 UC-WMC 7,5 (23X8) CUS 0824767 1 UC-WMC 7,5 (30X 8) CUS 0824776 1
UC-WMC 5,6 (30X8) RD CUS 0827016 1 UC-WMC 7,5 (23X 8) RD CUS 0824764 1 UC-WMC 7,5 (30X8) RD CUS 0824783 1
UC-WMC 5,6 (30X8) OG CUS 0827015 1 UC-WMC 7,5 (23X8) OG CUS 0824770 1 UC-WMC 7,5 (30X8) OG CUS 0824782 1
UC-WMC 5,6 (30X8) YE CUS 0827018 1 UC-WMC 7,5 (23X8) YE CUS 0824771 1 UC-WMC 7,5 (30X 8) YE CUS 0824777 1
UC-WMC 5,6 (30X8) VT CUS 0827017 1 UC-WMC 7,5 (23X8) VT CUS 0826785 1 UC-WMC 7,5 (30X8) VT CUS 0826787 1
UC-WMC 5,6 (30X8) BU CUS 0827013 1 UC-WMC 7,5 (23X8) BU CUS 0824768 1 UC-WMC 7,5 (30X8) BU CUS 0824780 1
UC-WMC 5,6 (30X8) GN CUS 0827014 1 UC-WMC 7,5 (23X8) GN CUS 0824769 1 UC-WMC 7,5 (30X8) GN CUS 0824781 1

Accessories Accessories Accessories

P1 UC-MAG 3 5146095 1 P1 UC-MAG 3 5146095 1 P1 UC-MAG 3 5146095 1

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 169

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Marking and labeling - MARKING system
Conductor and cable marking
UniCard slide-on conductor marking Can be printed with:

y
P R I NT E D
123
UV x F OR YOU

UV LED technology Plotter

40 markers for conductor diameters

from 1.3 to 1.6 mm,
lettering field size: 12 x 3 mm

Technical data
General data
Can be printed with: BLUEMARK CLED  BLUEMARK LED  CMS-P1-PLOTTER
– The UC-WMCO ... UniCard labeling Number of individual labels 40
range includes slide-on markers for the Number of individual labels per strip 10
Material PA
subsequent labeling of conductors. They Inflammability class according to UL 94 V2
can be slid on easily using the Temperature range [°C] -40 ... 120
Components free from silicone and halogen
UC-WMCO ... TOOL Conductor diameter range [mm] 1.3 ... 1.6
– The markers, which are supplied in uni- Conductor cross section range [mm2] 0.25 ... 0.5
form sheets, can be printed onto quickly Ordering data
and easily using the BLUEMARK CLED
– The format automatically ensures printing Description Color Type Order No.
Pcs. /
Pkt.
with a high level of positional accuracy
UniCard, for subsequent labeling of conductors
– Large-surface labeling in a space-saving
design white UC-WMCO 1,6 (12X3) 0827092 10
red UC-WMCO 1,6 (12X3) RD 0827516 10
– Secure tight fit even in the event of orange UC-WMCO 1,6 (12X3) OG 0827517 10
vibrations yellow UC-WMCO 1,6 (12X3) YE 0827513 10
– The sheets provide space for including violet UC-WMCO 1,6 (12X3) VT 0827518 10
blue UC-WMCO 1,6 (12X3) BU 0827514 10
function texts green UC-WMCO 1,6 (12X3) GN 0827515 10
– Labeling service: Phoenix Contact can UniCard, for subsequent labeling of conductors, labeled acc. to
customer specifications1)
custom-label all UniCard markers in
accordance with your requirements white UC-WMCO 1,6 (12X3) CUS 0829032 1
red UC-WMCO 1,6 (12X3) RD CUS 0829036 1
Notes: orange UC-WMCO 1,6 (12X3) OG CUS 0829037 1
1) yellow UC-WMCO 1,6 (12X3) YE CUS 0829033 1
For ordering example, see page 359.
violet UC-WMCO 1,6 (12X3) VT CUS 0829038 1
blue UC-WMCO 1,6 (12X3) BU CUS 0829034 1
green UC-WMCO 1,6 (12X3) GN CUS 0829035 1

Accessories
Magazine, for CMS-P1-PLOTTER
P1 UC-MAG 7 5146568 1
Assembly tool, for easily sliding on UC-WMCO 1,6 and
UC-WMCO 2,1 conductor markers
UC-WMCO 2,1 TOOL 0827803 10
Assembly tool set, for easily sliding on UC-WMCO 1,6 ...
and UC-WMCO 4,9 ... conductor markers

UC-WMCO TOOL SET 0827807 1

170 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Marking and labeling - MARKING system
Conductor and cable marking

P R I NT E D P R I NT E D P R I NT E D
F OR YOU F OR YOU F OR YOU

40 markers for conductor diameters 40 markers for conductor diameters 40 markers for conductor diameters
from 1.3 to 1.6 mm, from 1.6 to 2.1 mm, from 1.6 to 2.1 mm,
lettering field size: 21 x 3 mm lettering field size: 12 x 3 mm lettering field size: 21 x 3 mm

Technical data Technical data Technical data

BLUEMARK CLED  BLUEMARK LED  CMS-P1-PLOTTER BLUEMARK CLED  BLUEMARK LED  CMS-P1-PLOTTER BLUEMARK CLED  BLUEMARK LED  CMS-P1-PLOTTER
40 40 40
10 10 10
PA PA PA
V2 V2 V2
-40 ... 120 -40 ... 120 -40 ... 120
free from silicone and halogen free from silicone and halogen free from silicone and halogen
1.3 ... 1.6 1.6 ... 2.1 1.6 ... 2.1
0.25 ... 0.5 0.5 ... 0.75 0.5 ... 0.75

Ordering data Ordering data Ordering data

Pcs. / Pcs. / Pcs. /

Type Order No. Type Order No. Type Order No.
Pkt. Pkt. Pkt.

UC-WMCO 1,6 (21X3) 0827106 10 UC-WMCO 2,1 (12X3) 0827120 10 UC-WMCO 2,1 (21X3) 0827134 10
UC-WMCO 1,6 (21X3) RD 0827528 10 UC-WMCO 2,1 (12X3) RD 0827540 10 UC-WMCO 2,1 (21X3) RD 0827552 10
UC-WMCO 1,6 (21X3) OG 0827529 10 UC-WMCO 2,1 (12X3) OG 0827541 10 UC-WMCO 2,1 (21X3) OG 0827553 10
UC-WMCO 1,6 (21X3) YE 0827525 10 UC-WMCO 2,1 (12X3) YE 0827537 10 UC-WMCO 2,1 (21X3) YE 0827549 10
UC-WMCO 1,6 (21X3) VT 0827530 10 UC-WMCO 2,1 (12X3) VT 0827542 10 UC-WMCO 2,1 (21X3) VT 0827554 10
UC-WMCO 1,6 (21X3) BU 0827526 10 UC-WMCO 2,1 (12X3) BU 0827538 10 UC-WMCO 2,1 (21X3) BU 0807550 10
UC-WMCO 1,6 (21X3) GN 0827527 10 UC-WMCO 2,1 (12X3) GN 0827539 10 UC-WMCO 2,1 (21X3) GN 0827551 10

UC-WMCO 1,6 (21X3) CUS 0829039 1 UC-WMCO 2,1 (12X3) CUS 0829046 1 UC-WMCO 2,1 (21X3) CUS 0829053 1
UC-WMCO 1,6 (21X3) RD CUS 0829043 1 UC-WMCO 2,1 (12X3) RD CUS 0829050 1 UC-WMCO 2,1 (21X3) RD CUS 0829057 1
UC-WMCO 1,6 (21X3) OG CUS 0829044 1 UC-WMCO 2,1 (12X3) OG CUS 0829051 1 UC-WMCO 2,1 (21X3) OG CUS 0829058 1
UC-WMCO 1,6 (21X3) YE CUS 0829040 1 UC-WMCO 2,1 (12X3) YE CUS 0829047 1 UC-WMCO 2,1 (21X3) YE CUS 0829054 1
UC-WMCO 1,6 (21X3) VT CUS 0829045 1 UC-WMCO 2,1 (12X3) VT CUS 0829052 1 UC-WMCO 2,1 (21X3) VT CUS 0829059 1
UC-WMCO 1,6 (21X3) BU CUS 0829041 1 UC-WMCO 2,1 (12X3) BU CUS 0829048 1 UC-WMCO 2,1 (21X3) BU CUS 0829055 1
UC-WMCO 1,6 (21X3) GN CUS 0829042 1 UC-WMCO 2,1 (12X3) GN CUS 0829049 1 UC-WMCO 2,1 (21X3) GN CUS 0829056 1

Accessories Accessories Accessories

P1 UC-MAG 7 5146568 1 P1 UC-MAG 7 5146568 1 P1 UC-MAG 7 5146568 1

UC-WMCO 2,1 TOOL 0827803 10 UC-WMCO 2,1 TOOL 0827803 10 UC-WMCO 2,1 TOOL 0827803 10

UC-WMCO TOOL SET 0827807 1 UC-WMCO TOOL SET 0827807 1 UC-WMCO TOOL SET 0827807 1

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 171

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Marking and labeling - MARKING system
Conductor and cable marking
UniCard slide-on conductor marking Can be printed with:

y
P R I NT E D
123
UV x F OR YOU

UV LED technology Plotter

40 markers for conductor diameters

from 2.1 to 2.9 mm,
lettering field size: 12 x 3.5 mm

Technical data
General data
Can be printed with: BLUEMARK CLED  BLUEMARK LED  CMS-P1-PLOTTER
– The UC-WMCO ... UniCard labeling Number of individual labels 40
range includes slide-on markers for the Number of individual labels per strip 10
Material PA
subsequent labeling of conductors. They Inflammability class according to UL 94 V2
can be slid on easily using the Temperature range [°C] -40 ... 120
Components free from silicone and halogen
UC-WMCO ... TOOL Conductor diameter range [mm] 2.1 ... 2.9
– The markers, which are supplied in uni- Conductor cross section range [mm2] 0.75 ... 1.5
form sheets, can be printed onto quickly Ordering data
and easily using the BLUEMARK CLED
– The format automatically ensures printing Description Color Type Order No.
Pcs. /
Pkt.
with a high level of positional accuracy
UniCard, for subsequent labeling of conductors
– Large-surface labeling in a space-saving
design white UC-WMCO 2,9 (12X3,5) 0827148 10
red UC-WMCO 2,9 (12X3,5) RD 0827564 10
– Secure tight fit even in the event of orange UC-WMCO 2,9 (12X3,5) OG 0827565 10
vibrations yellow UC-WMCO 2,9 (12X3,5) YE 0827561 10
– The sheets provide space for including violet UC-WMCO 2,9 (12X3,5) VT 0827566 10
blue UC-WMCO 2,9 (12X3,5) BU 0827562 10
function texts green UC-WMCO 2,9 (12X3,5) GN 0827563 10
– Labeling service: Phoenix Contact can UniCard, for subsequent labeling of conductors, labeled acc. to
customer specifications1)
custom-label all UniCard markers in
accordance with your requirements white UC-WMCO 2,9 (12X3,5) CUS 0829060 1
red UC-WMCO 2,9 (12X3,5) RD CUS 0829064 1
Notes: orange UC-WMCO 2,9 (12X3,5) OG CUS 0829065 1
1) yellow UC-WMCO 2,9 (12X3,5) YE CUS 0829061 1
For ordering example, see page 359.
violet UC-WMCO 2,9 (12X3,5) VT CUS 0829066 1
blue UC-WMCO 2,9 (12X3,5) BU CUS 0829062 1
green UC-WMCO 2,9 (12X3,5) GN CUS 0829063 1

Accessories
Magazine, for CMS-P1-PLOTTER
P1 UC-MAG 7 5146568 1
Assembly tool, for easily sliding on UC-WMCO 2,9 ... and
UC-WMCO 3,6 ... conductor markers

UC-WMCO 3,6 TOOL 0827804 10

Assembly tool set, for easily sliding on UC-WMCO 1,6 ...
and UC-WMCO 4,9 ... conductor markers

UC-WMCO TOOL SET 0827807 1

172 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Marking and labeling - MARKING system
Conductor and cable marking

P R I NT E D P R I NT E D P R I NT E D
F OR YOU F OR YOU F OR YOU

40 markers for conductor diameters 32 markers for conductor diameters 32 markers for conductor diameters
from 2.1 to 2.9 mm, from 2.9 to 3.6 mm, from 2.9 to 3.6 mm,
lettering field size: 21 x 3.5 mm lettering field size: 12 x 4.5 mm lettering field size: 21 x 4.5 mm

Technical data Technical data Technical data

BLUEMARK CLED  BLUEMARK LED  CMS-P1-PLOTTER BLUEMARK CLED  BLUEMARK LED  CMS-P1-PLOTTER BLUEMARK CLED  BLUEMARK LED  CMS-P1-PLOTTER
40 32 32
10 8 8
PA PA PA
V2 V2 V2
-40 ... 120 -40 ... 120 -40 ... 120
free from silicone and halogen free from silicone and halogen free from silicone and halogen
2.1 ... 2.9 2.9 ... 3.6 2.9 ... 3.6
0.75 ... 1.5 1.5 ... 2.5 1.5 ... 2.5

Ordering data Ordering data Ordering data

Pcs. / Pcs. / Pcs. /

Type Order No. Type Order No. Type Order No.
Pkt. Pkt. Pkt.

UC-WMCO 2,9 (21X3,5) 0827162 10 UC-WMCO 3,6 (12X4,5) 0827176 10 UC-WMCO 3,6 (21X4,5) 0827190 10
UC-WMCO 2,9 (21X3,5) RD 0827576 10 UC-WMCO 3,6 (12X4,5) RD 0827588 10 UC-WMCO 3,6 (21X4,5) RD 0827600 10
UC-WMCO 2,9 (21X3,5) OG 0827577 10 UC-WMCO 3,6 (12X4,5) OG 0827589 10 UC-WMCO 3,6 (21X4,5) OG 0827601 10
UC-WMCO 2,9 (21X3,5) YE 0827573 10 UC-WMCO 3,6 (12X4,5) YE 0827585 10 UC-WMCO 3,6 (21X4,5) YE 0827597 10
UC-WMCO 2,9 (21X3,5) VT 0827578 10 UC-WMCO 3,6 (12X4,5) VT 0827590 10 UC-WMCO 3,6 (21X4,5) VT 0827602 10
UC-WMCO 2,9 (21X3,5) BU 0827574 10 UC-WMCO 3,6 (12X4,5) BU 0827586 10 UC-WMCO 3,6 (21X4,5) BU 0827598 10
UC-WMCO 2,9 (21X3,5) GN 0827575 10 UC-WMCO 3,6 (12X4,5) GN 0827587 10 UC-WMCO 3,6 (21X4,5) GN 0827599 10

UC-WMCO 2,9 (21X3,5) CUS 0829067 1 UC-WMCO 3,6 (12X4,5) CUS 0829074 1 UC-WMCO 3,6 (21X4,5) CUS 0829081 1
UC-WMCO 2,9 (21X3,5) RD CUS 0829071 1 UC-WMCO 3,6 (12X4,5) RD CUS 0829078 1 UC-WMCO 3,6 (21X4,5) RD CUS 0829085 1
UC-WMCO 2,9 (21X3,5) OG CUS 0829072 1 UC-WMCO 3,6 (12X4,5) OG CUS 0829079 1 UC-WMCO 3,6 (21X4,5) OG CUS 0829086 1
UC-WMCO 2,9 (21X3,5) YE CUS 0829068 1 UC-WMCO 3,6 (12X4,5) YE CUS 0829075 1 UC-WMCO 3,6 (21X4,5) YE CUS 0829082 1
UC-WMCO 2,9 (21X3,5) VT CUS 0829073 1 UC-WMCO 3,6 (12X4,5) VT CUS 0829080 1 UC-WMCO 3,6 (21X4,5) VT CUS 0829087 1
UC-WMCO 2,9 (21X3,5) BU CUS 0829069 1 UC-WMCO 3,6 (12X4,5) BU CUS 0829076 1 UC-WMCO 3,6 (21X4,5) BU CUS 0829083 1
UC-WMCO 2,9 (21X3,5) GN CUS 0829070 1 UC-WMCO 3,6 (12X4,5) GN CUS 0829077 1 UC-WMCO 3,6 (21X4,5) GN CUS 0829084 1

Accessories Accessories Accessories

P1 UC-MAG 7 5146568 1 P1 UC-MAG 7 5146568 1 P1 UC-MAG 7 5146568 1

UC-WMCO 3,6 TOOL 0827804 10 UC-WMCO 3,6 TOOL 0827804 10 UC-WMCO 3,6 TOOL 0827804 10

UC-WMCO TOOL SET 0827807 1 UC-WMCO TOOL SET 0827807 1 UC-WMCO TOOL SET 0827807 1

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 173

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Marking and labeling - MARKING system
Conductor and cable marking
UniCard slide-on conductor marking
P R I NT E D P R I NT E D
F OR YOU F OR YOU
– The UC-WMCO ... UniCard labeling
range includes slide-on markers for the
subsequent labeling of conductors. They
can be slid on easily using the
UC-WMCO ... TOOL
– Labeling service: Phoenix Contact can
custom-label all UniCard markers in
accordance with your requirements
Notes:
24 markers for conductor diameters 24 markers for conductor diameters
1) For ordering example, see page 359.
from 3.6 to 4.9 mm, from 3.6 to 4.9 mm,
lettering field size: 12 x 5 mm lettering field size: 21 x5 mm

Technical data Technical data

General data
Can be printed with: BLUEMARK CLED  BLUEMARK LED  CMS-P1-PLOTTER BLUEMARK CLED  BLUEMARK LED  CMS-P1-PLOTTER
Number of individual labels 24 24
Number of individual labels per strip 6 6
Material PA PA
Inflammability class according to UL 94 V2 V2
Temperature range [°C] -40 ... 120 -40 ... 120
Components free from silicone and halogen free from silicone and halogen
Conductor diameter range [mm] 3.6 ... 4.9 3.6 ... 4.9
Conductor cross section range [mm2] 2.5 ... 4 2.5 ... 4

Ordering data Ordering data

Pcs. / Pcs. /
Description Color Type Order No. Type Order No.
Pkt. Pkt.
UniCard, for subsequent labeling of conductors

white UC-WMCO 4,9 (12X5) 0827733 5 UC-WMCO 4,9 (21X5) 0827747 5

red UC-WMCO 4,9 (12X5) RD 0827737 5 UC-WMCO 4,9 (21X5) RD 0827751 5
orange UC-WMCO 4,9 (12X5) OG 0827738 5 UC-WMCO 4,9 (21X5) OG 0827752 5
yellow UC-WMCO 4,9 (12X5) YE 0827734 5 UC-WMCO 4,9 (21X5) YE 0827748 5
violet UC-WMCO 4,9 (12X5) VT 0827739 5 UC-WMCO 4,9 (21X5) VT 0827753 5
blue UC-WMCO 4,9 (12X5) BU 0827735 5 UC-WMCO 4,9 (21X5) BU 0827749 5
green UC-WMCO 4,9 (12X5) GN 0827736 5 UC-WMCO 4,9 (21X5) GN 0827750 5
UniCard, for subsequent labeling of conductors,
labeled acc. to customer specifications1)

white UC-WMCO 4,9 (12X5) CUS 0829088 1 UC-WMCO 4,9 (21X5) CUS 0829095 1
red UC-WMCO 4,9 (12X5) RD CUS 0829092 1 UC-WMCO 4,9 (21X5) RD CUS 0829099 1
orange UC-WMCO 4,9 (12X5) OG CUS 0829093 1 UC-WMCO 4,9 (21X5) OG CUS 0829100 1
yellow UC-WMCO 4,9 (12X5) YE CUS 0829089 1 UC-WMCO 4,9 (21X5) YE CUS 0829096 1
violet UC-WMCO 4,9 (12X5) VT CUS 0829094 1 UC-WMCO 4,9 (21X5) VT CUS 0829101 1
blue UC-WMCO 4,9 (12X5) BU CUS 0829090 1 UC-WMCO 4,9 (21X5) BU CUS 0829097 1
green UC-WMCO 4,9 (12X5) GN CUS 0829091 1 UC-WMCO 4,9 (21X5) GN CUS 0829098 1

Accessories Accessories
Magazine, for CMS-P1-PLOTTER
P1 UC-MAG 7 5146568 1 P1 UC-MAG 7 5146568 1
Assembly tool, for easily sliding on UC-WMCO 4,9 ...
conductor markers
UC-WMCO 5,8 TOOL 0827805 10 UC-WMCO 5,8 TOOL 0827805 10
Assembly tool set, for easily sliding on UC-WMCO 1,6 ...
and UC-WMCO 4,9 ... conductor markers

UC-WMCO TOOL SET 0827807 1 UC-WMCO TOOL SET 0827807 1

174 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Marking and labeling - MARKING system
Conductor and cable marking
Conductor marking with ferrules that Can be printed with:
can be labeled

UV
UV LED technology

Ferrules for conductors

with a cross section of 0.5 to 2.5 mm²,
lettering field size: 15 x 4 mm

Technical data
General data
Can be printed with: BLUEMARK CLED  BLUEMARK LED
– Ferrules can be labeled with Material / coating E-CU / tin-plated (galvanic)
BLUEMARK CLED Temperature range [°C] -40 ... 120
Components free from silicone and halogen
– Crimping and marking in one step
– Highly resistant and optimum printing Ordering data
quality thanks to modern UV printing Description Color Type Order No.
Pcs. /
technology Pkt.

– Ferrules made from electrolytic copper Ferrules, with plastic sleeve that can be marked, color range
according to DIN 46228-4: 1990-09
– Electrogalvanized 20 pcs., 0.5 mm² cross section white AI-WM 0,5-8 WH 3240542 780
– Corresponding crimping pliers can be 20 pcs., 0.75 mm² cross section gray AI-WM 0,75-8 GY 3240543 780
20 pcs., 1.0 mm² cross section red AI-WM 1-8 RD 3240544 780
found on page 393. 20 pcs., 1.5 mm² cross section white AI-WM 1,5-8 WH 3240545 780
20 pcs., 2.5 mm² cross section blue AI-WM 2,5-8 BU 3240572 528

Accessories
Magazine for BLUEMARK printer, for accommodating ferrules
with insulating collar that can be labeled

For 0.5 - 1.5 mm² BLUEMARK MAG AI-WM 5146567 1

For 2.5 mm² BLUEMARK MAG AI-WM 2,5 5146640 1

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 175

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Marking and labeling - MARKING system
Conductor and cable marking
UniCard conductor marking for Can be printed with:
marking collars
P R I NT E D
F OR YOU

y
123
UV x
UV LED technology Plotter

48 markers
for a lettering field size of 10 x 4 mm

Technical data
General data
Can be printed with: BLUEMARK CLED  BLUEMARK LED  CMS-P1-PLOTTER
– The UC-WMT ... UniCard labeling range Number of individual labels 48
includes markers for conductor marking Number of individual labels per strip 8
Material PA
with marking collars from the Inflammability class according to UL 94 V2
PATG/PATO ... system; see page 224 Temperature range [°C] -40 ... 120
Components free from silicone and halogen
– The markers, which are supplied in uni-
form sheets, can be printed onto quickly Ordering data
and easily using the BLUEMARK CLED Pcs. /
Description Color Type Order No.
– The format automatically ensures printing Pkt.
with a high level of positional accuracy UniCard, with insert strips for PATG and PATO marking collars
– Labeled insert strips are simply inserted white UC-WMT (10X4) 0819372 10
into the collars. This protects the marking red UC-WMT (10X4) RD 0821001 10
against contamination orange UC-WMT (10X4) OG 0823986 10
yellow UC-WMT (10X4) YE 0819385 10
– To simplify mounting, the insert labels are violet UC-WMT (10X4) VT 0825360 10
arranged on UniCard sheets so that they blue UC-WMT (10X4) BU 0820992 10
can be separated branch by branch green UC-WMT (10X4) GN 0823999 10
UniCard, with insert strips for marking system, labeled acc. to
– The sheets provide space for including customer specifications1)
function texts white UC-WMT (10X 4) CUS 0824788 1
red UC-WMT (10X 4) RD CUS 0824790 1
– Labeling service: Phoenix Contact can orange UC-WMT (10X4) OG CUS 0824796 1
custom-label all UniCard markers in yellow UC-WMT (10X 4) YE CUS 0824791 1
accordance with your requirements violet UC-WMT (10X4) VT CUS 0826789 1
blue UC-WMT (10X 4) BU CUS 0824789 1
Notes: green UC-WMT (10X4) GN CUS 0824795 1

PATG/PATO ... system, see page 224. Accessories

1) For ordering example, see page 359. Magazine, for CMS-P1-PLOTTER
P1 UC-MAG 4 5146105 1

176 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Marking and labeling - MARKING system
Conductor and cable marking

P R I NT E D P R I NT E D P R I NT E D
F OR YOU F OR YOU F OR YOU

32 markers 32 markers 24 markers

for a lettering field size of 12 x 4 mm for a lettering field size of 15 x 4 mm for a lettering field size of 18 x 4 mm

Technical data Technical data Technical data

BLUEMARK CLED  BLUEMARK LED  CMS-P1-PLOTTER BLUEMARK CLED  BLUEMARK LED  CMS-P1-PLOTTER BLUEMARK CLED  BLUEMARK LED  CMS-P1-PLOTTER
32 32 24
8 8 8
PA PA PA
V2 V2 V2
-40 ... 120 -40 ... 120 -40 ... 120
free from silicone and halogen free from silicone and halogen free from silicone and halogen

Ordering data Ordering data Ordering data

Pcs. / Pcs. / Pcs. /

Type Order No. Type Order No. Type Order No.
Pkt. Pkt. Pkt.

UC-WMT (12X4) 0823517 10 UC-WMT (15X4) 0819398 10 UC-WMT (18X4) 0820293 10

UC-WMT (12X4) RD 0823614 10 UC-WMT (15X4) RD 0821043 10 UC-WMT (18X4) RD 0821085 10
UC-WMT (12X4) OG 0823588 10 UC-WMT (15X4) OG 0824037 10 UC-WMT (18X4) OG 0824079 10
UC-WMT (12X4) YE 0823591 10 UC-WMT (15X4) YE 0819408 10 UC-WMT (18X4) YE 0820303 10
UC-WMT (12X4) VT 0825378 10 UC-WMT (15X4) VT 0825361 10 UC-WMT (18X4) VT 0825362 10
UC-WMT (12X4) BU 0823575 10 UC-WMT (15X4) BU 0821030 10 UC-WMT (18X4) BU 0821072 10
UC-WMT (12X4) GN 0823601 10 UC-WMT (15X4) GN 0824040 10 UC-WMT (18X4) GN 0824082 10

UC-WMT (12X4) CUS 0827033 1 UC-WMT (15X 4) CUS 0824812 1 UC-WMT (18X4) CUS 0824824 1
UC-WMT (12X4) RD CUS 0827035 1 UC-WMT (15X 4) RD CUS 0824814 1 UC-WMT (18X4) RD CUS 0824826 1
UC-WMT (12X4) OG CUS 0827036 1 UC-WMT (15X4) OG CUS 0824821 1 UC-WMT (18X4) OG CUS 0824833 1
UC-WMT (12X4) YE CUS 0827037 1 UC-WMT (15X 4) YE CUS 0824815 1 UC-WMT (18X4) YE CUS 0824827 1
UC-WMT (12X4) VT CUS 0827038 1 UC-WMT (15X4) VT CUS 0826791 1 UC-WMT (18X4) VT CUS 0826793 1
UC-WMT (12X4) BU CUS 0827039 1 UC-WMT (15X 4) BU CUS 0824813 1 UC-WMT (18X4) BU CUS 0824825 1
UC-WMT (12X4) GN CUS 0827040 1 UC-WMT (15X4) GN CUS 0824820 1 UC-WMT (18X4) GN CUS 0824832 1

Accessories Accessories Accessories

P1 UC-MAG 4 5146105 1 P1 UC-MAG 4 5146105 1 P1 UC-MAG 4 5146105 1

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 177

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Marking and labeling - MARKING system
Conductor and cable marking
UniCard conductor marking for
marking collars
P R I NT E D P R I NT E D
F OR YOU F OR YOU
– The UC-WMT ... UniCard labeling range
includes markers for conductor marking
with marking collars from the
PATG/PATO ... system; see page 224
– Labeling service: Phoenix Contact can
custom-label all UniCard markers in ac-
cordance with your requirements
Notes:
PATG/PATO ... system, see page 224.
24 markers 16 markers
1) For ordering example, see page 359.
for a lettering field size of 23 x 4 mm for a lettering field size of 30 x 4 mm

Technical data Technical data

General data
Can be printed with: BLUEMARK CLED  BLUEMARK LED  CMS-P1-PLOTTER BLUEMARK CLED  BLUEMARK LED  CMS-P1-PLOTTER
Number of individual labels 24 16
Number of individual labels per strip 8 8
Material PA PA
Inflammability class according to UL 94 V2 V2
Temperature range [°C] -40 ... 120 -40 ... 120
Components free from silicone and halogen free from silicone and halogen

Ordering data Ordering data

Pcs. / Pcs. /
Description Color Type Order No. Type Order No.
Pkt. Pkt.
UniCard, with insert strips for PATG and PATO marking collars

white UC-WMT (23X4) 0819411 10 UC-WMT (30X4) 0819437 10

red UC-WMT (23X4) RD 0821124 10 UC-WMT (30X4) RD 0821166 10
orange UC-WMT (23X4) OG 0824118 10 UC-WMT (30X4) OG 0824150 10
yellow UC-WMT (23X4) YE 0819424 10 UC-WMT (30X4) YE 0819440 10
violet UC-WMT (23X4) VT 0825363 10 UC-WMT (30X4) VT 0825364 10
blue UC-WMT (23X4) BU 0821111 10 UC-WMT (30X4) BU 0821153 10
green UC-WMT (23X4) GN 0824121 10 UC-WMT (30X4) GN 0824163 10
UniCard, with insert strips for marking system, labeled acc. to
customer specifications1)
white UC-WMT (23X4) CUS 0824838 1 UC-WMT (30X 4) CUS 0824848 1
red UC-WMT (23X4) RD CUS 0824842 1 UC-WMT (30X4) RD CUS 0824855 1
orange UC-WMT (23X4) OG CUS 0824841 1 UC-WMT (30X4) OG CUS 0824854 1
yellow UC-WMT (23X4) YE CUS 0824843 1 UC-WMT (30X 4) YE CUS 0824849 1
violet UC-WMT (23X4) VT CUS 0826795 1 UC-WMT (30X4) VT CUS 0826797 1
blue UC-WMT (23X4) BU CUS 0824839 1 UC-WMT (30X4) BU CUS 0824852 1
green UC-WMT (23X4) GN CUS 0824840 1 UC-WMT (30X4) GN CUS 0824853 1

Accessories Accessories
Magazine, for CMS-P1-PLOTTER
P1 UC-MAG 4 5146105 1 P1 UC-MAG 4 5146105 1

178 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Marking and labeling - MARKING system
Conductor and cable marking
UniCard cable marking for assembly Can be printed with:
with cable binders
P R I NT E D
F OR YOU

y
123
UV x
UV LED technology Plotter

Markers for cable diameters > 7 mm

Technical data
General data
Can be printed with: BLUEMARK CLED  BLUEMARK LED  CMS-P1-PLOTTER
– The UC-WMTB ... UniCard labeling range Material PA
includes markers that can be secured us- Inflammability class according to UL 94 V2
Temperature range [°C] -40 ... 120
ing standard cable binders Components free from silicone and halogen
– The markers, which are supplied in uni- Cable diameter range [mm] >7
Cable cross section range [mm2] > 16
form sheets, can be printed onto quickly
and easily using the BLUEMARK CLED Ordering data
– The format automatically ensures printing Pcs. /
Description Color Type Order No.
with a high level of positional accuracy Pkt.
– For large-surface labeling of conductors UniCard, for assembly with two cable binders, 4-section, lettering
field size: 44 x 15 mm
and cables > 7 mm in diameter white UC-WMTB (44X15) 0828376 10
– The sheets provide space for including red UC-WMTB (44X15) RD 0828377 10
function texts orange UC-WMTB (44X15) OG 0828378 10
yellow UC-WMTB (44X15) YE 0828379 10
– Labeling service: Phoenix Contact can violet UC-WMTB (44X15) VT 0828380 10
custom-label all UniCard markers in ac- blue UC-WMTB (44X15) BU 0828381 10
cordance with your requirements green UC-WMTB (44X15) GN 0828382 10
silver UC-WMTB (44X15) SR 0828383 10
Notes: brown UC-WMTB (44X15) BN 0828384 10
UniCard, for assembly with one cable binder
For more cable markers for fixing with cable binders, visit:
www.phoenixcontact.net/products. 3-section, lettering field size: 52 x 30 mm white UC-WMTB (52X30) 5775288 10
For corresponding cable binders, see page 574 onwards. 2-section, lettering field size: 52 x 50 mm white UC-WMTB (52X50) 5775289 10
1) UniCard, for mounting with two cable binders, labeled acc. to
For ordering example, see page 359.
customer specifications, 4-section, lettering field size:
44 x 15 mm1)
white UC-WMTB (44X15) CUS 0829379 1
orange UC-WMTB (44X15) OG CUS 0829405 1
yellow UC-WMTB (44X15) YE CUS 0829409 1
violet UC-WMTB (44X15) VT CUS 0829408 1
blue UC-WMTB (44X15) BU CUS 0829403 1
green UC-WMTB (44X15) GN CUS 0829404 1
silver UC-WMTB (44X15) SR CUS 0829407 1
brown UC-WMTB (44X15) BN CUS 0829402 1
UniCard, for assembly with one cable binder, labeled acc. to cus-
tomer specifications1)

3-section, lettering field size: 52 x 30 mm white UC-WMTB (52X30) CUS 0829432 1
2-section, lettering field size: 52 x 50 mm white UC-WMTB (52X50) CUS 0829433 1

Accessories
Magazine, for CMS-P1-PLOTTER
P1 UC-MAG 6 5146121 1

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 179

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Marking and labeling - MARKING system
Conductor and cable marking
UniCard cable marking for assembly Can be printed with:
with cable binders
P R I NT E D
F OR YOU

y
123
UV x
UV LED technology Plotter

12 markers for a cable diameter > 4 mm,

lettering field size: 24 x 5 mm

Technical data
General data
Can be printed with: BLUEMARK CLED  BLUEMARK LED  CMS-P1-PLOTTER
– The UC-WMTBA ... UniCard labeling Number of individual labels 12
range includes markers that can be se- Number of individual labels per strip 4
Material PA
cured using standard cable binders Inflammability class according to UL 94 V2
– The markers, which are supplied in uni- Temperature range [°C] -40 ... 120
Components free from silicone and halogen
form sheets, can be printed onto quickly Cable diameter range [mm] >4
and easily using the BLUEMARK CLED
Ordering data
– The format automatically ensures printing
with a high level of positional accuracy Description Color Type Order No.
Pcs. /
Pkt.
– For large-surface labeling of conductors
and cables > 4 mm in diameter UniCard, for assembly with cable binders
white UC-WMTBA (24X5) 0820426 10
– The sheets provide space for including red UC-WMTBA (24X5) RD 0820565 10
function texts orange UC-WMTBA (24X5) OG 0825342 10
yellow UC-WMTBA (24X5) YE 0820439 10
– Thanks to their angular shape the mark- violet UC-WMTBA (24X5) VT 0825344 10
ers fit perfectly onto cables blue UC-WMTBA (24X5) BU 0820552 10
– Labeling service: Phoenix Contact can green UC-WMTBA (24X5) GN 0825343 10
UniCard, for assembly with cable binders, labeled acc. to cus-
custom-label all UniCard markers in ac- tomer specifications1)
cordance with your requirements
white UC-WMTBA (24X5) CUS 0824860 1
Notes: red UC-WMTBA (24X5) RD CUS 0824862 1
orange UC-WMTBA (24X5) OG CUS 0826800 1
Cable binders can be used for UC-WMTBA...
yellow UC-WMTBA (24X5) YE CUS 0824863 1
up to a width of 5 mm.
violet UC-WMTBA (24X5) VT CUS 0826801 1
For corresponding cable binders, see page 574 onwards. blue UC-WMTBA (24X5) BU CUS 0824861 1
1) For ordering example, see page 359. green UC-WMTBA (24X5) GN CUS 0826799 1

Accessories
Magazine, for CMS-P1-PLOTTER
P1 UC-MAG 1 5146079 1

180 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Marking and labeling - MARKING system
Conductor and cable marking

P R I NT E D P R I NT E D
F OR YOU F OR YOU

12 markers for a cable diameter > 6 mm, 4 markers for a cable diameter > 6 mm,
lettering field size: 29 x 8 mm lettering field size: 60 x 11 mm

Technical data Technical data

BLUEMARK CLED  BLUEMARK LED  CMS-P1-PLOTTER BLUEMARK CLED  BLUEMARK LED  CMS-P1-PLOTTER
12 4
4 1
PA PA
V2 V2
-40 ... 120 -40 ... 120
free from silicone and halogen free from silicone and halogen
>6 >6

Ordering data Ordering data

Pcs. / Pcs. /
Type Order No. Type Order No.
Pkt. Pkt.

UC-WMTBA (29X8) 0820183 10 UC-WMTBA (60X11) 0820468 10

UC-WMTBA (29X8) RD 0820604 10 UC-WMTBA (60X11) RD 0820646 10
UC-WMTBA (29X8) OG 0825345 10 UC-WMTBA (60X11) OG 0825348 10
UC-WMTBA (29X8) YE 0820390 10 UC-WMTBA (60X11) YE 0820471 10
UC-WMTBA (29X8) VT 0825347 10 UC-WMTBA (60X11) VT 0825350 10
UC-WMTBA (29X8) BU 0820594 10 UC-WMTBA (60X11) BU 0820633 10
UC-WMTBA (29X8) GN 0825346 10 UC-WMTBA (60X11) GN 0825349 10

UC-WMTBA (29X8) CUS 0824868 1 UC-WMTBA (60X11) CUS 0824876 1

UC-WMTBA (29X8) RD CUS 0824870 1 UC-WMTBA (60X11) RD CUS 0824878 1
UC-WMTBA (29X8) OG CUS 0826806 1 UC-WMTBA (60X11) OG CUS 0826812 1
UC-WMTBA (29X8) YE CUS 0824871 1 UC-WMTBA (60X11) YE CUS 0824879 1
UC-WMTBA (29X8) VT CUS 0826807 1 UC-WMTBA (60X11) VT CUS 0826813 1
UC-WMTBA (29X8) BU CUS 0824869 1 UC-WMTBA (60X11) BU CUS 0824877 1
UC-WMTBA (29X8) GN CUS 0826805 1 UC-WMTBA (60X11) GN CUS 0826811 1

Accessories Accessories

P1 UC-MAG 1 5146079 1 P1 UC-MAG 1 5146079 1

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 181

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Marking and labeling - MARKING system
Conductor and cable marking
UniCard conductor marking for Can be printed with:
marking collars
P R I NT E D
F OR YOU

1
2
1
2
UV
Thermal transfer for sheets UV LED technology
and cards

60 markers with 10 x 4 mm lettering field size

Technical data
General data
Can be printed with: THERMOMARK CARD PLUS  THERMOMARK CARD  BLUE-
– The UCT-WMT ... UniCard labeling MARK CLED  BLUEMARK LED
Number of individual labels 60
range includes markers for conductor Material PC V0
marking with marking collars from the Inflammability class according to UL 94 V0
PATG/PATO ... system; see page 224 Temperature range [°C] -40 ... 120
Components free from silicone and halogen
– The markers, which are supplied in uni-
form sheets, can be printed onto quickly Ordering data
and easily using the BLUEMARK CLED Pcs. /
Description Color Type Order No.
– The format automatically ensures printing Pkt.

with a high level of positional accuracy UniCard, with insert strips for PATG and PATO marking collars
– Labeled insert strips are simply inserted white UCT-WMT (10X4) 0801430 10
into the collars. This protects the marking red UCT-WMT (10X4) RD 0801433 10
against contamination orange UCT-WMT (10X4) OG 0801434 10
yellow UCT-WMT (10X4) YE 0801431 10
– To simplify mounting, the insert labels are violet UCT-WMT (10X4) VT 0801436 10
arranged on UniCard sheets so that they blue UCT-WMT (10X4) BU 0801437 10
green UCT-WMT (10X4) GN 0801435 10
can be separated branch by branch UniCard, with insert strips for PATG, PATO marking system,
– The sheets provide space for including labeled according to customer specifications1)
function texts white UCT-WMT (10X4) CUS 0801515 1
red UCT-WMT (10X4) RD CUS 0801517 1
– Labeling service: Phoenix Contact can orange UCT-WMT (10X4) OG CUS 0801518 1
custom-label all UniCard markers in yellow UCT-WMT (10X4) YE CUS 0801516 1
violet UCT-WMT (10X4) VT CUS 0801520 1
accordance with your requirements blue UCT-WMT (10X4) BU CUS 0801521 1
green UCT-WMT (10X4) GN CUS 0801519 1
Notes:
PATG/PATO ... system, see page 224. Accessories
1) For ordering example, see page 359. Magazine, for THERMOMARK CARD ..., for accommodating
UCT-WMT ... sheets, UCT-EM (17X10)
THERMOMARK CARD-UCT-MAG7 0801734 1

182 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Marking and labeling - MARKING system
Conductor and cable marking

P R I NT E D P R I NT E D P R I NT E D
F OR YOU F OR YOU F OR YOU

50 markers with 12 x 4 mm lettering field size 50 markers with 15 x 4 mm lettering field size 40 markers with 18 x 4 mm lettering field size

Technical data Technical data Technical data

THERMOMARK CARD PLUS  THERMOMARK CARD  BLUE- THERMOMARK CARD PLUS  THERMOMARK CARD  BLUE- THERMOMARK CARD PLUS  THERMOMARK CARD  BLUE-
MARK CLED  BLUEMARK LED MARK CLED  BLUEMARK LED MARK CLED  BLUEMARK LED
50 50 40
PC V0 PC V0 PC V0
V0 V0 V0
-40 ... 120 -40 ... 120 -40 ... 120
free from silicone and halogen free from silicone and halogen free from silicone and halogen

Ordering data Ordering data Ordering data

Pcs. / Pcs. / Pcs. /

Type Order No. Type Order No. Type Order No.
Pkt. Pkt. Pkt.

UCT-WMT (12X4) 0801438 10 UCT-WMT (15X4) 0801446 10 UCT-WMT (18X4) 0801462 10

UCT-WMT (12X4) RD 0801440 10 UCT-WMT (15X4) RD 0801448 10 UCT-WMT (18X4) RD 0801464 10
UCT-WMT (12X4) OG 0801441 10 UCT-WMT (15X4) OG 0801449 10 UCT-WMT (18X4) OG 0801465 10
UCT-WMT (12X4) YE 0801439 10 UCT-WMT (15X4) YE 0801447 10 UCT-WMT (18X4) YE 0801463 10
UCT-WMT (12X4) VT 0801443 10 UCT-WMT (15X4) VT 0801451 10 UCT-WMT (18X4) VT 0801467 10
UCT-WMT (12X4) BU 0801444 10 UCT-WMT (15X4) BU 0801452 10 UCT-WMT (18X4) BU 0801468 10
UCT-WMT (12X4) GN 0801442 10 UCT-WMT (15X4) GN 0801450 10 UCT-WMT (18X4) GN 0801466 10

UCT-WMT (12X4) CUS 0801522 1 UCT-WMT (15X4) CUS 0801530 1 UCT-WMT (18X4) CUS 0801538 1
UCT-WMT (12X4) RD CUS 0801524 1 UCT-WMT (15X4) RD CUS 0801533 1 UCT-WMT (18X4) RD CUS 0801541 1
UCT-WMT (12X4) OG CUS 0801525 1 UCT-WMT (15X4) OG CUS 0801534 1 UCT-WMT (18X4) OG CUS 0801543 1
UCT-WMT (12X4) YE CUS 0801523 1 UCT-WMT (15X4) YE CUS 0801531 1 UCT-WMT (18X4) YE CUS 0801540 1
UCT-WMT (12X4) VT CUS 0801528 1 UCT-WMT (15X4) VT CUS 0801536 1 UCT-WMT (18X4) VT CUS 0801545 1
UCT-WMT (12X4) BU CUS 0801529 1 UCT-WMT (15X4) BU CUS 0801537 1 UCT-WMT (18X4) BU CUS 0801546 1
UCT-WMT (12X4) GN CUS 0801527 1 UCT-WMT (15X4) GN CUS 0801535 1 UCT-WMT (18X4) GN CUS 0801544 1

Accessories Accessories Accessories

THERMOMARK CARD-UCT-MAG7 0801734 1 THERMOMARK CARD-UCT-MAG7 0801734 1 THERMOMARK CARD-UCT-MAG7 0801734 1

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 183

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Marking and labeling - MARKING system
Conductor and cable marking
UniCard conductor marking for Can be printed with:
marking collars
P R I NT E D
F OR YOU
– The UCT-WMT ... UniCard labeling
range includes markers for conductor

1
2
marking with marking collars from the

1
2
PATG/PATO ... system; see page 224 UV
– The sheets provide space for including Thermal transfer for sheets UV LED technology
function texts and cards
– Labeling service: Phoenix Contact can
custom-label all UniCard markers in
accordance with your requirements
30 markers with 23 x 4 mm lettering field size
Notes:
1) For ordering example, see page 359.

Technical data
General data
Can be printed with: THERMOMARK CARD PLUS  THERMOMARK CARD 
BLUEMARK CLED  BLUEMARK LED
Number of individual labels 30
Material PC V0
Inflammability class according to UL 94 V0
Temperature range [°C] -40 ... 120
Components free from silicone and halogen

Ordering data

Pcs. /
Description Color Type Order No.
Pkt.
UniCard, with insert strips for PATG and PATO marking collars

white UCT-WMT (23X4) 0801453 10

red UCT-WMT (23X4) RD 0801455 10
orange UCT-WMT (23X4) OG 0801456 10
yellow UCT-WMT (23X4) YE 0801454 10
violet UCT-WMT (23X4) VT 0801459 10
blue UCT-WMT (23X4) BU 0801460 10
green UCT-WMT (23X4) GN 0801457 10
UniCard, with insert strips for marking system, labeled acc. to
customer specifications1)
white UCT-WMT (23X4) CUS 0801547 1
red UCT-WMT (23X4) RD CUS 0801549 1
orange UCT-WMT (23X4) OG CUS 0801550 1
yellow UCT-WMT (23X4) YE CUS 0801548 1
violet UCT-WMT (23X4) VT CUS 0801552 1
blue UCT-WMT (23X4) BU CUS 0801553 1
green UCT-WMT (23X4) GN CUS 0801551 1

Accessories
Magazine, for THERMOMARK CARD ..., for accommodating
UCT-WMT ... sheets, UCT-EM (17X10)
THERMOMARK CARD-UCT-MAG7 0801734 1

184 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Marking and labeling - MARKING system
Conductor and cable marking

P R I NT E D
F OR YOU

30 markers with 30 x 4 mm lettering field size

Technical data

THERMOMARK CARD PLUS  THERMOMARK CARD 

BLUEMARK CLED  BLUEMARK LED
30
PC V0
V0
-40 ... 120
free from silicone and halogen

Ordering data

Pcs. /
Type Order No.
Pkt.

UCT-WMT (30X4) 0801422 10

UCT-WMT (30X4) RD 0801424 10
UCT-WMT (30X4) OG 0801425 10
UCT-WMT (30X4) YE 0801423 10
UCT-WMT (30X4) VT 0801427 10
UCT-WMT (30X4) BU 0801428 10
UCT-WMT (30X4) GN 0801426 10

UCT-WMT (30X4) CUS 0801507 1

UCT-WMT (30X4) RD CUS 0801509 1
UCT-WMT (30X4) OG CUS 0801510 1
UCT-WMT (30X4) YE CUS 0801508 1
UCT-WMT (30X4) VT CUS 0801512 1
UCT-WMT (30X4) BU CUS 0801514 1
UCT-WMT (30X4) GN CUS 0801511 1

Accessories

THERMOMARK CARD-UCT-MAG7 0801734 1

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 185

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Marking and labeling - MARKING system
Conductor and cable marking
UniCard slide-on conductor marking Can be printed with:
P R I NT E D
F OR YOU

1
2
1
2
UV
Thermal transfer for sheets UV LED technology
and cards

55 markers for conductor diameters from 1.5

to 4.7 mm

Technical data
General data
Can be printed with: THERMOMARK CARD PLUS  THERMOMARK CARD  BLUE-
– The UCT-WMS ... UniCard labeling range MARK CLED  BLUEMARK LED
Material PC V0
includes markers that can be slid onto Inflammability class according to UL 94 V0
conductors Temperature range [°C] -40 ... 120
– The markers, which are supplied in uni- Components free from silicone and halogen

form sheets, can be printed onto quickly Ordering data

and easily using the
Pcs. /
THERMOMARK CARD and Description Color Type Order No.
Pkt.
BLUEMARK CLED UniCard, for labeling conductors with a diameter of 1.5 - 3.2 mm
– The format automatically ensures printing
55-section, lettering field size: 12 x 4 mm white UCT-WMS 3,2 (12X4) 0828570 8
with a high level of positional accuracy yellow UCT-WMS 3,2 (12X4) YE 0828572 8
– The markers support multiline labeling
– The sheets provide space for including 45-section, lettering field size: 12 x 5.5 mm, for
conductors with a diameter of 2.5 - 4.7 mm
white UCT-WMS 4,7 (12X5,5) 0828571 6

function texts
– Labeling service: Phoenix Contact can yellow UCT-WMS 4,7 (12X5,5) YE 0828573 6
UniCard, for labeling conductors with a diameter of 1.5 - 3.2 mm,
custom-label all UniCard markers in labeled acc. to customer specifications1)
accordance with your requirements
55-section, lettering field size: 12 x 4 mm white UCT-WMS 3,2 (12X4) CUS 0829951 1
Notes: yellow UCT-WMS 3,2 (12X4) YE CUS 0829952 1
1) For ordering example, see page 359. 45-section, lettering field size: 12 x 5.5 mm, for white UCT-WMS 4,7 (12X5,5) CUS 0829953 1
conductors with a diameter of 2.5 - 4.7 mm

yellow UCT-WMS 4,7 (12X5,5) YE CUS 0829954 1

Accessories
Magazine, for THERMOMARK CARD ..., for accommodating:
UCT-WMS 
THERMOMARK CARD-UCT-MAG3 5146613 1

186 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Marking and labeling - MARKING system
Conductor and cable marking
UniSheet conductor marking for Can be printed with:
marking collars
P R I NT E D
F OR YOU

1
2
1
2
Thermal transfer for sheets
and cards

112 markers
for a lettering field size of 10 x 4 mm

Technical data
General data
Can be printed with: THERMOMARK CARD PLUS  THERMOMARK CARD
– The US-WMT ... UniSheet labeling range Number of individual labels 112
includes markers for conductor marking Number of individual labels per strip 14
Material PVC
with marking collars from the Inflammability class according to UL 94 V0
PATG/PATO ... system Temperature range [°C] -30 ... 80
Wipe resistance DIN EN 61010-1 (VDE 0411-1)
– The markers, which are supplied as uni- Components Silicone-free
form cards, can be printed onto quickly,
Ordering data
easily, and cost-effectively using the
THERMOMARK CARD Description Color Type Order No.
Pcs. /
Pkt.
– Labeled insert strips are simply inserted
into the collars. This protects the marking UniSheet, with insert strips for PATG and PATO marking collars

against contamination white US-WMT (10X4) 0828765 10

– The perforated marking strips are easy to red US-WMT (10X4) RD 0829273 10
orange US-WMT (10X4) OG 0829274 10
separate and can be easily fitted yellow US-WMT (10X4) YE 0828952 10
– The sheets provide space for including violet US-WMT (10X4) VT 0829276 10
function texts blue US-WMT (10X4) BU 0829277 10
green US-WMT (10X4) GN 0829278 10
– Labeling service: Phoenix Contact can UniSheet, with insert strips for marking system, labeled acc. to
custom-label all UniSheet markers in ac- customer specifications1)
white US-WMT (10X4) CUS 0829957 1
cordance with your requirements red US-WMT (10X4) RD CUS 0829958 1
orange US-WMT (10X4) OG CUS 0829959 1
Notes:
yellow US-WMT (10X4) YE CUS 0829960 1
For PATG/PATO... system marking collars, see page 224. violet US-WMT (10X4) VT CUS 0829961 1
1) For ordering example, see page 359. blue US-WMT (10X4) BU CUS 0829962 1
green US-WMT (10X4) GN CUS 0829963 1

Accessories
Magazine, for THERMOMARK CARD..., for accommodating all
US-... materials
THERMOMARK CARD-US-MAG1 5146451 1

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 187

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Marking and labeling - MARKING system
Conductor and cable marking
UniSheet cable marking
for marking collars
P R I NT E D P R I NT E D
F OR YOU F OR YOU
– The US-WMT ... UniSheet labeling range
includes markers for conductor marking
with marking collars from the
PATG/PATO ... system
– Labeling service: Phoenix Contact can
custom-label all UniSheet markers in
accordance with your requirements
Notes:
For PATG/PATO... system marking collars, see page 224.
98 markers 84 markers
1) For ordering example, see page 359.
for a lettering field size of 12 x 4 mm for a lettering field size of 15 x 4 mm

Technical data Technical data

General data
Can be printed with: THERMOMARK CARD PLUS  THERMOMARK CARD THERMOMARK CARD PLUS  THERMOMARK CARD
Number of individual labels 98 84
Number of individual labels per strip 14 14
Material PVC PVC
Inflammability class according to UL 94 V0 V0
Temperature range [°C] -30 ... 80 -30 ... 80
Wipe resistance DIN EN 61010-1 (VDE 0411-1) DIN EN 61010-1 (VDE 0411-1)
Components Silicone-free Silicone-free

Ordering data Ordering data

Pcs. / Pcs. /
Description Color Type Order No. Type Order No.
Pkt. Pkt.
UniSheet, with insert strips for PATG and PATO marking collars

white US-WMT (12X4) 0828766 10 US-WMT (15X4) 0828767 10

red US-WMT (12X4) RD 0829280 10 US-WMT (15X4) RD 0829287 10
orange US-WMT (12X4) OG 0829281 10 US-WMT (15X4) OG 0829288 10
yellow US-WMT (12X4) YE 0828953 10 US-WMT (15X4) YE 0828954 10
violet US-WMT (12X4) VT 0829283 10 US-WMT (15X4) VT 0829290 10
blue US-WMT (12X4) BU 0829284 10 US-WMT (15X4) BU 0829291 10
green US-WMT (12X4) GN 0829285 10 US-WMT (15X4) GN 0829292 10
UniSheet, with insert strips for marking system, labeled acc. to
customer specifications1)
white US-WMT (12X4) CUS 0829964 1 US-WMT (15X4) CUS 0829971 1
red US-WMT (12X4) RD CUS 0829965 1 US-WMT (15X4) RD CUS 0829972 1
orange US-WMT (12X4) OG CUS 0829966 1 US-WMT (15X4) OG CUS 0829973 1
yellow US-WMT (12X4) YE CUS 0829967 1 US-WMT (15X4) YE CUS 0829974 1
violet US-WMT (12X4) VT CUS 0829968 1 US-WMT (15X4) VT CUS 0829975 1
blue US-WMT (12X4) BU CUS 0829969 1 US-WMT (15X4) BU CUS 0829976 1
blue US-WMT (12X4) GN CUS 0829970 1 US-WMT (15X4) GN CUS 0829977 1

Accessories Accessories
Magazine, for THERMOMARK CARD..., for accommodating all
US-... materials
THERMOMARK CARD-US-MAG1 5146451 1 THERMOMARK CARD-US-MAG1 5146451 1

188 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Marking and labeling - MARKING system
Conductor and cable marking

P R I NT E D P R I NT E D P R I NT E D
F OR YOU F OR YOU F OR YOU

70 markers 56 markers 42 markers

for a lettering field size of 18 x 4 mm for a lettering field size of 23 x 4 mm for a lettering field size of 30 x 4 mm

Technical data Technical data Technical data

THERMOMARK CARD PLUS  THERMOMARK CARD THERMOMARK CARD PLUS  THERMOMARK CARD THERMOMARK CARD PLUS  THERMOMARK CARD
70 56 42
14 14 14
PVC PVC PVC
V0 V0 V0
-30 ... 80 -30 ... 80 -30 ... 80
DIN EN 61010-1 (VDE 0411-1) DIN EN 61010-1 (VDE 0411-1) DIN EN 61010-1 (VDE 0411-1)
Silicone-free Silicone-free Silicone-free

Ordering data Ordering data Ordering data

Pcs. / Pcs. / Pcs. /

Type Order No. Type Order No. Type Order No.
Pkt. Pkt. Pkt.

US-WMT (18X4) 0828768 10 US-WMT (23X4) 0828769 10 US-WMT (30X4) 0828770 10

US-WMT (18X4) RD 0829294 10 US-WMT (23X4) RD 0829301 10 US-WMT (30X4) RD 0829308 10
US-WMT (18X4) OG 0829295 10 US-WMT (23X4) OG 0829302 10 US-WMT (30X4) OG 0829309 10
US-WMT (18X4) YE 0828955 10 US-WMT (23X4) YE 0828956 10 US-WMT (30X4) YE 0828957 10
US-WMT (18X4) VT 0829297 10 US-WMT (23X4) VT 0829304 10 US-WMT (30X4) VT 0829311 10
US-WMT (18X4) BU 0829298 10 US-WMT (23X4) BU 0829305 10 US-WMT (30X4) BU 0829312 10
US-WMT (18X4) GN 0829299 10 US-WMT (23X4) GN 0829306 10 US-WMT (30X4) GN 0829313 10

US-WMT (18X4) CUS 0829978 1 US-WMT (23X4) CUS 0829985 1 US-WMT (30X4) CUS 0829992 1
US-WMT (18X4) RD CUS 0829979 1 US-WMT (23X4) RD CUS 0829986 1 US-WMT (30X4) RD CUS 0829993 1
US-WMT (18X4) OG CUS 0829980 1 US-WMT (23X4) OG CUS 0829987 1 US-WMT (30X4) OG CUS 0829994 1
US-WMT (18X4) YE CUS 0829981 1 US-WMT (23X4) YE CUS 0829988 1 US-WMT (30X4) YE CUS 0829995 1
US-WMT (18X4) VT CUS 0829982 1 US-WMT (23X4) VT CUS 0829989 1 US-WMT (30X4) VT CUS 0829996 1
US-WMT (18X4) BU CUS 0829983 1 US-WMT (23X4) BU CUS 0829990 1 US-WMT (30X4) BU CUS 0829997 1
US-WMT (18X4) GN CUS 0829984 1 US-WMT (23X4) GN CUS 0829991 1 US-WMT (30X4) GN CUS 0829998 1

Accessories Accessories Accessories

THERMOMARK CARD-US-MAG1 5146451 1 THERMOMARK CARD-US-MAG1 5146451 1 THERMOMARK CARD-US-MAG1 5146451 1

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 189

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Marking and labeling - MARKING system
Conductor and cable marking
UniSheet conductor marking for Can be printed with:
assembly with cable binders

1
2
1
2
Thermal transfer for sheets
and cards

Unlabeled

Technical data
General data
Can be printed with: THERMOMARK CARD PLUS  THERMOMARK CARD
– The US-WMTB... UniSheet labeling range Material PVC
includes markers that can be secured us- Inflammability class according to UL 94 V0
Temperature range [°C] -30 ... 80
ing standard cable binders Wipe resistance DIN EN 61010-1 (VDE 0411-1)
– The markers, which are supplied in uni- Components Silicone-free
form sheets, can be printed onto quickly, Ordering data
easily, and cost-effectively using the
Pcs. /
THERMOMARK CARD Description Color Type Order No.
Pkt.
– The perforated marking strips are easy to UniSheet, with markers for attachment using cable binders,
separate and can be easily fitted for a conductor diameter ≥ 13 mm
35-section, lettering field size: 24 x 5 mm white US-WMTB (24X5) 0828771 10
– The sheets provide space for including red US-WMTB (24X5) RD 0829320 10
function texts orange US-WMTB (24X5) OG 0829321 10
yellow US-WMTB (24X5) YE 0828958 10
Notes: violet US-WMTB (24X5) VT 0829323 10
For corresponding cable binders, see page 574 onwards. blue US-WMTB (24X5) BU 0829324 10
green US-WMTB (24X5) GN 0829325 10
24-section, lettering field size: 29 x 8 mm, white US-WMTB (29X8) 0828772 10
for conductor diameter ≥ 13 mm
red US-WMTB (29X8) RD 0829327 10
orange US-WMTB (29X8) OG 0829328 10
yellow US-WMTB (29X8) YE 0828959 10
violet US-WMTB (29X8) VT 0829330 10
blue US-WMTB (29X8) BU 0829331 10
green US-WMTB (29X8) GN 0829332 10
12-section, lettering field size: 44 x 15 mm, white US-WMTB (44X15) 0828773 10
for conductor diameter ≥ 4 mm
red US-WMTB (44X15) RD 0829334 10
orange US-WMTB (44X15) OG 0829335 10
yellow US-WMTB (44X15) YE 0828960 10
violet US-WMTB (44X15) VT 0829337 10
blue US-WMTB (44X15) BU 0829338 10
green US-WMTB (44X15) GN 0829339 10

Accessories
Magazine, for THERMOMARK CARD...,
for accommodating all US-... materials
THERMOMARK CARD-US-MAG1 5146451 1

190 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Marking and labeling - MARKING system
Conductor and cable marking
UniSheet conductor marking for
assembly with cable binders
P R I NT E D
F OR YOU
– The US-WMTB... conductor markers can
also be supplied labeled according to
customer requirements
Notes:
1) For ordering example, see page 359.

Labeled according to customer specifications

Technical data
General data
Material PVC
Inflammability class according to UL 94 V0
Temperature range [°C] -30 ... 80
Wipe resistance DIN EN 61010-1 (VDE 0411-1)
Components Silicone-free

Ordering data

Pcs. /
Description Color Type Order No.
Pkt.
UniSheet, with markers for attachment using cable binders,
labeled acc. to customer specifications1)
35-section, lettering field size: 24 x 5 mm, white US-WMTB (24X5) CUS 0830004 1
for conductor diameter ≥ 13 mm
red US-WMTB (24X5) RD CUS 0830005 1
orange US-WMTB (24X5) OG CUS 0830006 1
yellow US-WMTB (24X5) YE CUS 0830007 1
violet US-WMTB (24X5) VT CUS 0830008 1
blue US-WMTB (24X5) BU CUS 0830009 1
blue US-WMTB (24X5) GN CUS 0830010 1
24-section, lettering field size: 29 x 8 mm, white US-WMTB (29X8) CUS 0830011 1
for conductor diameter ≥ 13 mm
red US-WMTB (29X8) RD CUS 0830012 1
orange US-WMTB (29X8) OG CUS 0830013 1
yellow US-WMTB (29X8) YE CUS 0830014 1
violet US-WMTB (29X8) VT CUS 0830015 1
blue US-WMTB (29X8) BU CUS 0830016 1
blue US-WMTB (29X8) GN CUS 0830017 1
12-section, lettering field size: 44 x 15 mm, white US-WMTB (44X15) CUS 0830018 1
for conductor diameter ≥ 4 mm
red US-WMTB (44X15) RD CUS 0830019 1
orange US-WMTB (44X15) OG CUS 0830020 1
yellow US-WMTB (44X15) YE CUS 0830021 1
violet US-WMTB (44X15) VT CUS 0830022 1
blue US-WMTB (44X15) BU CUS 0830023 1
green US-WMTB (44X15) GN CUS 0830024 1

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 191

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Marking and labeling - MARKING system
Conductor and cable marking
Self-adhesive conductor marking with Can be printed with:
transparent protective foil

1
2
1
2
Thermal transfer for sheets
and cards

Marker for conductor diameters

of up to 36 mm

Technical data
General data
Can be printed with: THERMOMARK CARD PLUS  THERMOMARK CARD
– The US-WML ... cable marker labels Material PVC
consist of a labeling field and a transparent Temperature range [°C] -50 ... 110
Wipe resistance DIN EN 61010-1 (VDE 0411-1)
protective foil Components Silicone-free
– The protective foil is wound over the Ordering data
labeling and provides permanent
protection against dirt and abrasion Description Color Type Order No.
Pcs. /
Pkt.
– The cable marker labels do not increase
Cable marker labels
the cross section of the cable, allowing 32-section, lettering field size: 13 x 13 mm, con- white US-WML 6 (13X13) 0800472 10
the cable to be subsequently drawn ductor diameter < 6.0 mm
8-section, lettering field size: 19 x 25 mm, conduc- white US-WML 14 (25X19) 0800473 10
through cable ducts, for example tor diameter < 14.0 mm
– The markers, which are supplied in uni- 4-section, lettering field size: 25 x 25 mm, conduc- white US-WML 36 (25X25) 0800474 10
tor diameter < 36.0 mm
form sheets, can be printed onto quickly,
easily, and cost-effectively using the
THERMOMARK CARD
– Quick and easy handling
– Resistant to solvents

192 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Marking and labeling - MARKING system
Conductor and cable marking
Self-adhesive conductor marking with Can be printed with:
transparent protective foil
P R I NT E D
F OR YOU

y
123
x
3
2
1

Laser Plotter

Marker for conductor diameter up to 36 mm

Technical data
General data
Can be printed with: CMS-P1-PLOTTER  Office printing systems
– WML ... cable marker labels consist of a Material Polyester
marking field and a transparent protective Temperature range [°C] -40 ... 150
Wipe resistance DIN EN 61010-1 (VDE 0411-1)
foil Components Free from halogen and cadmium
– The protective foil is wound over the la- Ordering data
beling and provides permanent protection
against dirt and abrasion Description Color Type Order No.
Pcs. /
Pkt.
– The cable marker labels do not increase
Cable marker labels, sheet format: A4, self-adhesive
the cross section of the cable, allowing
the cable to be subsequently drawn 1 sheet = 168 labels, up to 3.0 mm Ø white WML 3 (13X10)A4 0830687 1
through cable ducts, for example 1 sheet = 168 labels, up to 3.0 mm Ø yellow WML 3 (13X10)A4 YE 0830688 1
– Quick and easy handling
1 sheet = 77 labels, up to 5.0 mm Ø white WML 5 (25X10)A4 0830689 1
– Resistant to solvents
1 sheet = 77 labels, up to 5.0 mm Ø yellow WML 5 (25X10)A4 YE 0830690 1
Notes:
Print image may vary depending on laser printer. 1 sheet = 56 labels, up to 7.5 mm Ø white WML 7,5 (25X13)A4 0830691 1
1) For ordering example, see page 359.
1 sheet = 56 labels, up to 7.5 mm Ø yellow WML 7,5 (25X13)A4 YE 0830692 1

1 sheet = 28 labels, up to 14 mm Ø white WML 14 (25X19)A4 0830693 1

1 sheet = 28 labels, up to 14 mm Ø yellow WML 14 (25X19)A4 YE 0830694 1
1 sheet = 10 labels, up to 22 mm Ø white WML 22 (35X25)A4 0830695 1
1 sheet = 10 labels, up to 22 mm Ø yellow WML 22 (35X25)A4 YE 0830696 1
1 sheet = 14 labels, up to 36 mm Ø white WML 36 (25X38)A4 0830697 1
1 sheet = 14 labels, up to 36 mm Ø yellow WML 36 (25X38)A4 YE 0830698 1
Cable marker labels,, self-adhesive,
labeled according to customer requirements1)

1 sheet = 168 labels, up to 3.0 mm Ø white WML 3 (13X10)A4 CUS 0830699 1

1 sheet = 168 labels, up to 3.0 mm Ø yellow WML 3 (13X10)A4 YE CUS 0830700 1

1 sheet = 77 labels, up to 5.0 mm Ø white WML 5 (25X10)A4 CUS 0830701 1

1 sheet = 77 labels, up to 5.0 mm Ø yellow WML 5 (25X10)A4 YE CUS 0830702 1

1 sheet = 56 labels, up to 6 mm Ø white WML 6 (25X13)A4 CUS 0830703 1

1 sheet = 56 labels, up to 6 mm Ø yellow WML 6 (25X13)A4 YE CUS 0830704 1
1 sheet = 28 labels, up to 14 mm Ø white WML 14 (25X19)A4 CUS 0830705 1
1 sheet = 28 labels, up to 14 mm Ø yellow WML 14 (25X19)A4 YE CUS 0830706 1
1 sheet = 10 labels, up to 22 mm Ø white WML 22 (35X25)A4 CUS 0830707 1
1 sheet = 10 labels, up to 22 mm Ø yellow WML 22 (35X25)A4 YE CUS 0830708 1
1 sheet = 14 labels, up to 36 mm Ø white WML 36 (25X38)A4 CUS 0830709 1

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 193

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Marking and labeling - MARKING system
Conductor and cable marking
Self-adhesive conductor marking with Can be printed with:
transparent protective foil

2
1
1
2
Thermal transfer for rolls

Marker for conductor diameters

of up to 46 mm, unlabeled

Technical data
General data
Can be printed with: THERMOMARK ROLL  THERMOMARK ROLL X1  THERMO-
– The cable marker labels consist of a label- MARK X1.1  THERMOMARK X1.2  THERMOMARK S1.1
Material PVC
ing field and a transparent protective foil Temperature range [°C] -50 ... 110
– The protective foil is wound over the Wipe resistance DIN EN 61010-1 (VDE 0411-1)
labeling and provides permanent Components Silicone-free

protection against dirt and abrasion Ordering data

– The cable marker labels do not increase
Pcs. /
the cross section of the cable, allowing Description Color Type Order No.
Pkt.
the cable to be subsequently drawn Cable marker labels
through cable ducts, for example 5000 labels, up to 3 mm Ø white WML 3 (13X10)R 0800073 1
3000 labels, up to 5 mm Ø white WML 5 (25X10)R 0817523 1
– High-quality labeling image created by 3000 labels, up to 5 mm Ø yellow WML 5 (25X10)R YE 0830673 1
thermal transfer printing 7000 labels, up to 6 mm Ø white WML 6 (13X13)R 0816252 1
– Quick and easy handling 7000 labels, up to 6 mm Ø yellow WML 6 (13X13)R YE 0830674 1
4000 labels, up to 7.5 mm Ø white WML 7,5 (13X13)R 0800074 1
– Resistant to solvents 1500 labels, up to 7.5 mm Ø white WML 7,5 (17X9)R 0828444 1
2100 labels, up to 7.5 mm Ø white WML 7,5 (25X13)R 0800075 1
1000 labels, up to 12 mm Ø white WML 12 (25X19)R 0800076 1
1500 labels, up to 14 mm Ø white WML 14 (25X19)R 0817536 1
1500 labels, up to 14 mm Ø yellow WML 14 (25X19)R YE 0817549 1
1000 labels, up to 14 mm Ø white WML 14 (38X19)R 0817552 1
1500 labels, up to 14 mm Ø yellow WML 14 (38X19)R YE 0830675 1
2500 labels, up to 18 mm Ø white WML 18 (12X12)R 0817507 1
500 labels, up to 20 mm Ø white WML 20 (31X25)R 0828457 1
900 labels, up to 22 mm Ø white WML 22 (25X25)R 0800078 1
500 labels, up to 36 mm Ø white WML 36 (25X38)R 0817510 1
250 labels, up to 46 mm Ø white WML 46 (25X38)R 0800067 1
Cable marker labels, on large roll
10,000 labels, up to 5 mm Ø white WML 5 (25X10)RL 0830676 1
15,000 labels, up to 6 mm Ø white WML 6 (13X13)RL 0830677 1
5000 labels, up to 14 mm Ø white WML 14 (25X19)RL 0830678 1
3000 labels, up to 14 mm Ø white WML 14 (38X19)RL 0830679 1

194 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Marking and labeling - MARKING system
Conductor and cable marking
Self-adhesive conductor marking with
transparent protective foil
P R I NT E D
F OR YOU
– All WML ... cable marker labels can also
be supplied labeled according to custom-
er requirements
Notes:
1) For ordering example, see page 359.

Markers for conductor diameters of

up to 36 mm,
labeled acc. to customer specifications

Technical data
General data
Material PVC
Temperature range [°C] -50 ... 110
Wipe resistance DIN EN 61010-1 (VDE 0411-1)
Components Silicone-free

Ordering data

Pcs. /
Description Color Type Order No.
Pkt.
Cable marker labels, labeled according to customer
requirements1)
Up to 3 mm Ø, 4 labels per strip white WML 3 (13X10)R CUS 0824884 1

Up to 5 mm Ø, 3 labels per strip white WML 5 (25X10)R CUS 0824885 1

Up to 5 mm Ø, 3 labels per strip yellow WML 5 (25X10)R YE CUS 0830680 1

Up to 6 mm Ø, 7 labels per strip white WML 6 (13X13)R CUS 0824886 1

Up to 6 mm Ø, 7 labels per strip yellow WML 6 (13X13)R YE CUS 0830681 1

Up to 7.5 mm Ø, 7 labels per strip white WML 7,5 (13X13)R CUS 0824887 1

Up to 7.5 mm Ø, 4 labels per strip white WML 7,5 (17X9)R CUS 0828991 1

Up to 7.5 mm Ø, 3 labels per strip white WML 7,5 (25X13)R CUS 0824888 1

Up to 12 mm Ø, 3 labels per strip white WML 12 (25X19)R CUS 0824889 1

Up to 14 mm Ø, 3 labels per strip white WML 14 (25X19)R CUS 0824890 1

Up to 14 mm Ø, 3 labels per strip yellow WML 14 (25X19)R YE CUS 0824891 1

Up to 14 mm Ø, 2 labels per strip white WML 14 (38X19)R CUS 0824892 1

Up to 14 mm Ø, 2 labels per strip yellow WML 14 (38X19)R YE CUS 0830682 1

Up to 18 mm Ø, 7 labels per strip white WML 18 (12X12)R CUS 0824894 1

Up to 20 mm Ø, 2 labels per strip white WML 20 (31X25)R CUS 0828992 1

Up to 22 mm Ø, 3 labels per strip white WML 22 (25X25)R CUS 0824895 1

Up to 36 mm Ø, 3 labels per strip white WML 36 (25X38)R CUS 0824896 1

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 195

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Marking and labeling - MARKING system
Conductor and cable marking
Self-adhesive conductor marking Can be printed with:
with transparent protective foil,
halogen-free

2
1
1
2
Thermal transfer for rolls

Marker for conductor diameters of up to

36 mm

Technical data
General data
Can be printed with: THERMOMARK ROLL  THERMOMARK ROLL X1
– The halogen-free cable marker labels con- Material PVC
sist of a labeling field and a transparent Temperature range [°C] -40 ... 100
Wipe resistance DIN EN 61010-1 (VDE 0411-1)
protective foil Components free from silicone and halogen
– The protective foil is wound over the la- Ordering data
beling and provides permanent protection
against dirt and abrasion Description Color Type Order No.
Pcs. /
Pkt.
– The cable marker labels do not increase
Cable marker labels, halogen-free
the cross section of the cable, allowing 5000 labels, up to 3 mm Ø white WML HF 3(13X10)R 0830812 1
the cable to be subsequently drawn 5000 labels, up to 3 mm Ø yellow WML HF 3(13X10)R YE 0830813 1
through cable ducts, for example 3000 labels, up to 5 mm Ø white WML HF 5(25X10)R 0830814 1
3000 labels, up to 5 mm Ø yellow WML HF 5(25X10)R YE 0830815 1
– High-quality labeling image created by 2100 labels, up to 7.5 mm Ø white WML HF 7,5(25X13)R 0830816 1
thermal transfer printing 2100 labels, up to 7.5 mm Ø yellow WML HF 7,5(25X13)R YE 0830817 1
1500 labels, up to 14 mm Ø white WML HF 14(25X19)R 0830818 1
– Quick and easy handling 1500 labels, up to 14 mm Ø yellow WML HF 14(25X19)R YE 0830819 1
– Resistant to solvents 900 labels, up to 22 mm Ø white WML HF 22(25X25)R 0830820 1
900 labels, up to 22 mm Ø yellow WML HF 22(25X25)R YE 0830821 1
500 labels, up to 36 mm Ø white WML HF 36(25X38)R 0830822 1
500 labels, up to 36 mm Ø yellow WML HF 36(25X38)R YE 0830823 1

196 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Marking and labeling - MARKING system
Conductor and cable marking
Self-adhesive conductor marking
with transparent protective foil,
P R I NT E D
halogen-free
F OR YOU
– All WML HF ... cable marker labels can
also be supplied labeled according to cus-
tomer requirements
Notes:
1) For ordering example, see page 359.

Labeled according to customer specifications

Technical data
General data
Material PVC
Temperature range [°C] -40 ... 100
Wipe resistance DIN EN 61010-1 (VDE 0411-1)
Components free from silicone and halogen

Ordering data

Pcs. /
Description Color Type Order No.
Pkt.
Cable marker labels, halogen-free, labeled according to cus-
tomer specifications1)

Up to 3 mm Ø, 4 labels per strip white WML HF 3(13X10)R CUS 0830824 1

Up to 3 mm Ø, 4 labels per strip yellow WML HF 3(13X10)R YE CUS 0830825 1

Up to 5 mm Ø, 3 labels per strip white WML HF 5(25X10)R CUS 0830826 1

Up to 5 mm Ø, 3 labels per strip yellow WML HF 5(25X10)R YE CUS 0830827 1

Up to 7.5 mm Ø, 3 labels per strip white WML HF 7,5(25X13)R CUS 0830828 1

Up to 7.5 mm Ø, 3 labels per strip yellow WML HF 7,5(25X13)R YE CUS 0830829 1

Up to 14 mm Ø, 3 labels per strip white WML HF 14(25X19)R CUS 0830831 1

Up to 14 mm Ø, 3 labels per strip yellow WML HF 14(25X19)R YE CUS 0830832 1

Up to 22 mm Ø, 3 labels per strip white WML HF 22(25X25)R CUS 0830833 1

Up to 22 mm Ø, 3 labels per strip yellow WML HF 22(25X25)R YE CUS 0830834 1

Up to 36 mm Ø, 3 labels per strip white WML HF 36(25X38)R CUS 0830835 1

Up to 36 mm Ø, 3 labels per strip yellow WML HF 36(25X38)R YE CUS 0830836 1

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 197

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Marking and labeling - MARKING system
Conductor and cable marking
Self-adhesive conductor marking Can be printed with:
as a flag, horizontal
P R I NT E D
F OR YOU

2
1
1
2
Thermal transfer for rolls

Marker for conductor diameters of up to 6 mm

Technical data
General data
Can be printed with: THERMOMARK ROLL  THERMOMARK ROLL X1  THERMO-
The WML-FLAGV... conductor marking MARK X1.1  THERMOMARK X1.2  THERMOMARK S1.1
Material Polyolefine
flags support large-surface marking of con- Temperature range [°C] -40 ... 60
ductors with a diameter of up to 6 mm Wipe resistance DIN EN 61010-1 (VDE 0411-1)
parallel to the conductor direction. They Components Free from halogen and cadmium

are characterized by: Ordering data

– Their ability to be printed on both sides
Pcs. /
– High-quality labeling image created by Description Color Type Order No.
Pkt.
thermal transfer printing Cable marking flags
– Quick and easy handling up to 6 mm Ø, lettering field size: 20 x 10 mm, white WML-FLAG 6 (20X10)R 0830711 1
2500 labels per roll
– Resistance to solvents up to 6 mm Ø, lettering field size: 30 x 10 mm, white WML-FLAG 6 (30X10)R 0830712 1
– Labeling service: Phoenix Contact can 2500 labels per roll
Cable marking flags, labeled according to customer
custom-label all conductor markers in specifications1)
accordance with your requirements up to 6 mm Ø, lettering field size: 20 x 10 mm, white WML-FLAG 6 (20X10)R CUS 0830715 1
1 label per strip
Notes: up to 6 mm Ø, lettering field size: 30 x 10 mm, white WML-FLAG 6 (30X10)R CUS 0830716 1
1)
1 label per strip
For ordering example, see page 359.

198 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Marking and labeling - MARKING system
Conductor and cable marking
Self-adhesive conductor marking Can be printed with:
as a flag, vertical
P R I NT E D
F OR YOU

2
1
1
2
Thermal transfer for rolls

Marker for conductor diameters of up to 6 mm

Technical data
General data
Can be printed with: THERMOMARK ROLL  THERMOMARK ROLL X1  THERMO-
The WML-FLAGV... conductor marking MARK X1.1  THERMOMARK X1.2  THERMOMARK S1.1
Material Polyolefine
flags support large-surface marking of con- Temperature range [°C] -40 ... 60
ductors with a diameter of up to 6 mm per- Wipe resistance DIN EN 61010-1 (VDE 0411-1)
pendicular to the conductor direction. They Components Free from halogen and cadmium

are characterized by: Ordering data

– Their ability to be printed on both sides
Pcs. /
– High-quality labeling image created by Description Color Type Order No.
Pkt.
thermal transfer printing Cable marking flags
– Quick and easy handling up to 6 mm Ø, lettering field size: 20 x 10 mm, white WML-FLAGV 6 (20X10)R 0830713 1
2500 labels per roll
– Resistance to solvents up to 6 mm Ø, lettering field size: 30 x 10 mm, white WML-FLAGV 6 (30X10)R 0830714 1
– Labeling service: Phoenix Contact can 2500 labels per roll
Cable marking flags, labeled according to customer
custom-label all conductor markers in ac- specifications1)
cordance with your requirements up to 6 mm Ø, lettering field size: 20 x 10 mm, white WML-FLAGV 6 (20X10)R CUS 0830717 1
3 labels per strip
Notes: up to 6 mm Ø, lettering field size: 30 x 10 mm, white WML-FLAGV 6 (30X10)R CUS 0830718 1
1)
3 labels per strip
For ordering example, see page 359.

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 199

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Marking and labeling - MARKING system
Conductor and cable marking
Pre-assembled shrink sleeves Can be printed with:

2
1
1
2
Thermal transfer for rolls

Conductor cross sections from 0.8 to 38 mm,

white and yellow

Technical data
General data
Can be printed with: THERMOMARK ROLL  THERMOMARK ROLL X1  THERMO-
– The WMS ... shrink sleeves permanently MARK X1.1  THERMOMARK X1.2
Material Polyolefine
identify conductors and cables Temperature range [°C] -55 ... 135
– The sleeves are pre-assembled for Wipe resistance DIN EN 61010-1 (VDE 0411-1)
optimum use of material Components Halogen-free
Shrink rate 3:1
– Up to four markers per tube are
separated by perforation Ordering data
– The conductor to be labeled is easily Pcs. /
Description Color Type Order No.
threaded through the sleeve and fixed by Pkt.

shrinking the sleeve Shrink sleeve, for conductor diameters 0.8 - 2.4 mm
– The sleeves remain flexible after shrinking 1 roll = 1000 markers, 15 mm long white WMS 2,4 (15X4)R 0800379 1
– The shrink sleeves offer the conductors yellow WMS 2,4 (15X4)R YE 0800412 1
additional electrical insulation and 1 roll = 500 markers, 30 mm long white WMS 2,4 (30X4)R 0800373 1
yellow WMS 2,4 (30X4)R YE 0800407 1
mechanical protection 1 roll = 250 markers, 60  mm long white WMS 2,4 (60X4)R 0800363 1
The following standards are satisfied: yellow WMS 2,4 (60X4)R YE 0800398 1
Shrink sleeve, for conductor diameters 1.0 - 3.2 mm
– UL 224 (125°C, 600 V, VW-1)
– CSA.C22.2 No. 198.1 (125°C, 600 V, 1 roll = 1000 markers, 15 mm long white WMS 3,2 (15X5)R 0800380 1
VW-1) yellow WMS 3,2 (15X5)R YE 0800413 1
1 roll = 500 markers, 30 mm long white WMS 3,2 (30X5)R 0800374 1
– MIL-STD-202G, SAE AMS-DTL-23053, yellow WMS 3,2 (30X5)R YE 0800408 1
SAE AS-81531 1 roll = 250 markers, 60  mm long white WMS 3,2 (60X5)R 0800364 1
yellow WMS 3,2 (60X5)R YE 0800399 1
Notes: Shrink sleeve, for conductor diameters 1.6 - 4.8 mm
The special THEMOMARK-RIBBON ... WMSU is required for
1 roll = 1000 markers, 15 mm long white WMS 4,8 (15X9)R 0800382 1
marking WMS ... shrink sleeves, see Printers, page 38.
yellow WMS 4,8 (15X9)R YE 0800414 1
1 roll = 500 markers, 30 mm long white WMS 4,8 (30X9)R 0800375 1
yellow WMS 4,8 (30X9)R YE 0800409 1
1 roll = 250 markers, 60  mm long white WMS 4,8 (60X9)R 0800366 1
yellow WMS 4,8 (60X9)R YE 0800400 1
Shrink sleeve, for conductor diameters 2.1 - 6.4 mm

1 roll = 500 markers, 30 mm long white WMS 6,4 (30X10)R 0800376 1
yellow WMS 6,4 (30X10)R YE 0800410 1
1 roll = 250 markers, 60  mm long white WMS 6,4 (60X10)R 0800367 1
yellow WMS 6,4 (60X10)R YE 0800401 1
Shrink sleeve, for conductor diameters 3.2 - 9.5 mm

1 roll = 500 markers, 30 mm long white WMS 9,5 (30X16)R 0800377 1
yellow WMS 9,5 (30X16)R YE 0800411 1
1 roll = 250 markers, 60  mm long white WMS 9,5 (60X16)R 0800368 1
yellow WMS 9,5 (60X16)R YE 0800402 1
Shrink sleeve, for conductor diameters 4.2 - 12.7 mm

1 roll = 250 markers, 60  mm long white WMS 12,7 (60X20)R 0800369 1
yellow WMS 12,7 (60X20)R YE 0800403 1
Shrink sleeve, for conductor diameters 6.4 - 19.1 mm

1 roll = 250 markers, 60  mm long white WMS 19,1 (60X30)R 0800370 1
yellow WMS 19,1 (60X30)R YE 0800404 1
Shrink sleeve, for conductor diameters 8.5 - 25.4 mm

1 roll = 250 markers, 60  mm long white WMS 25,4 (60X40)R 0800371 1
yellow WMS 25,4 (60X40)R YE 0800405 1
Shrink sleeve, for conductor diameters 12.7 - 38.1 mm

1 roll = 250 markers, 60  mm long white WMS 38,1 (60X60)R 0800372 1
yellow WMS 38,1 (60X60)R YE 0800406 1

200 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Marking and labeling - MARKING system
Conductor and cable marking
Pre-assembled shrink sleeves

Notes:
The special THEMOMARK-RIBBON ... WMSU is required for
marking WMS ... shrink sleeves, see Printers, page 38.

The external THERMOMARK ROLL-ERH media hub is required

for RL rolls, see Printers, page 38.
The external THERMOMARK-ERH 500 media hub is required for
RXL rolls, see Printers, page 38.

Conductor cross sections Conductor cross sections

from 0.8 to 4.8 mm, RL roll, white from 0.8 to 4.8 mm, RXL roll, white

Technical data Technical data

General data
Can be printed with: THERMOMARK ROLL  THERMOMARK ROLL X1  THERMOMARK ROLL  THERMOMARK ROLL X1 
THERMOMARK X1.1  THERMOMARK X1.2 THERMOMARK X1.1  THERMOMARK X1.2
Material Polyolefine Polyolefine
Temperature range [°C] -55 ... 135 -55 ... 135
Wipe resistance DIN EN 61010-1 (VDE 0411-1) DIN EN 61010-1 (VDE 0411-1)
Components Halogen-free Halogen-free
Shrink rate 3:1 3:1

Ordering data Ordering data

Pcs. / Pcs. /
Description Color Type Order No. Type Order No.
Pkt. Pkt.
Shrink sleeve, for conductor diameters 0.8 - 2.4 mm

1 roll = 4000 markers, 15 mm long white WMS 2,4 (15X4)RL 0800389 1
1 roll = 10000 markers, 15 mm long white WMS 2,4 (15X4)RXL 0800396 1

1 roll = 2000 markers, 30 mm long white WMS 2,4 (30X4)RL 0800386 1
1 roll = 5000 markers, 30 mm long white WMS 2,4 (30X4)RXL 0800394 1
1 roll = 1000 markers, 60 mm long white WMS 2,4 (60X4)RL 0800383 1
1 roll = 2500 markers, 60 mm long white WMS 2,4 (60X4)RXL 0800392 1
Shrink sleeve, for conductor diameters 1.0 - 3.2 mm

1 roll = 4000 markers, 15 mm long white WMS 3,2 (15X5)RL 0800390 1
1 roll = 2000 markers, 30 mm long white WMS 3,2 (30X5)RL 0800387 1
1 roll = 1000 markers, 60 mm long white WMS 3,2 (60X5)RL 0800384 1
Shrink sleeve, for conductor diameters 1.6 - 4.8 mm

1 roll = 4000 markers, 15 mm long white WMS 4,8 (15X9)RL 0800391 1
1 roll = 10000 markers, 15 mm long white WMS 4,8 (15X9)RXL 0800397 1

1 roll = 2000 markers, 30 mm long white WMS 4,8 (30X9)RL 0800388 1
1 roll = 5000 markers, 30 mm long white WMS 4,8 (30X9)RXL 0800395 1
1 roll = 1000 markers, 60 mm long white WMS 4,8 (60X9)RL 0800385 1
1 roll = 2500 markers, 60 mm long white WMS 4,8 (60X9)RXL 0800393 1

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 201

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Marking and labeling - MARKING system
Conductor and cable marking
Pre-assembled shrink sleeves, labeled
acc. to customer specifications
P R I NT E D
F OR YOU

Conductor cross sections

from 0.8 to 38 mm, white

Technical data
General data
Material Polyolefine
All WMS ... pre-assembled shrink sleeves Temperature range [°C] -55 ... 135
can be supplied labeled according to Wipe resistance DIN EN 61010-1 (VDE 0411-1)
Components Halogen-free
customer requirements. Shrink rate 3:1
The following standards are satisfied: Ordering data
– UL 224 (125°C, 600 V, VW-1)
– CSA.C22.2 No. 198.1 (125°C, 600 V, Description Type Order No.
Pcs. /
Pkt.
VW-1)
Shrink sleeve, for conductor diameters 0.8 - 2.4 mm,
– MIL-STD-202G, SAE AMS-DTL-23053, labeled according to customer requirements1)
SAE AS-81531 4 markers per strip, 15 mm long WMS 2,4 (15X4)R CUS 0800752 1

Notes: 2 markers per strip, 30 mm long WMS 2,4 (30X4)R CUS 0800745 1
1) For ordering example, see page 359.
1 marker per strip, 60  mm long WMS 2,4 (60X4)R CUS 0800736 1

Shrink sleeve, for conductor diameters 1.0 - 3.2 mm,

labeled according to customer requirements1)
4 markers per strip, 15 mm long WMS 3,2 (15X5)R CUS 0800753 1

2 markers per strip, 30 mm long WMS 3,2 (30X5)R CUS 0800746 1

1 marker per strip, 60  mm long WMS 3,2 (60X5)R CUS 0800737 1

Shrink sleeve, for conductor diameters 1.6 - 4.8 mm,

labeled according to customer requirements1)
4 markers per strip, 15 mm long WMS 4,8 (15X9)R CUS 0800754 1

2 markers per strip, 30 mm long WMS 4,8 (30X9)R CUS 0800748 1

1 marker per strip, 60  mm long WMS 4,8 (60X9)R CUS 0800738 1

Shrink sleeve, for conductor diameters 2.1 - 6.4 mm,

labeled according to customer requirements1)
2 markers per strip, 30 mm long WMS 6,4 (30X10)R CUS 0800749 1

1 marker per strip, 60  mm long WMS 6,4 (60X10)R CUS 0800739 1

Shrink sleeve, for conductor diameters 3.2 - 9.5 mm,

labeled according to customer requirements1)
2 markers per strip, 30 mm long WMS 9,5 (30X16)R CUS 0800751 1

1 marker per strip, 60  mm long WMS 9,5 (60X16)R CUS 0800740 1

Shrink sleeve, for conductor diameters 4.2 - 12.7 mm,

labeled according to customer requirements1)
1 marker per strip, 60  mm long WMS 12,7 (60X20)R CUS 0800741 1

Shrink sleeve, for conductor diameters 6.4 - 19.1 mm,

labeled according to customer requirements1)
1 marker per strip, 60  mm long WMS 19,1 (60X30)R CUS 0800742 1

Shrink sleeve, for conductor diameters 8.5 - 25.4 mm,

labeled according to customer requirements1)
1 marker per strip, 60  mm long WMS 25,4 (60X40)R CUS 0800743 1

Shrink sleeve, for conductor diameters 12.7 - 38.1 mm,

labeled according to customer requirements1)
1 marker per strip, 60  mm long WMS 38,1 (60X60)R CUS 0800744 1

202 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Marking and labeling - MARKING system
Conductor and cable marking

P R I NT E D
F OR YOU

Conductor cross sections

from 0.8 to 38 mm, yellow

Technical data

Polyolefine
-55 ... 135
DIN EN 61010-1 (VDE 0411-1)
Halogen-free
3:1

Ordering data

Pcs. /
Type Order No.
Pkt.

WMS 2,4 (15X4)R YE CUS 0800770 1

WMS 2,4 (30X4)R YE CUS 0800765 1

WMS 2,4 (60X4)R YE CUS 0800755 1

WMS 3,2 (15X5)R YE CUS 0800771 1

WMS 3,2 (30X5)R YE CUS 0800766 1

WMS 3,2 (60X5)R YE CUS 0800756 1

WMS 4,8 (15X9)R YE CUS 0800772 1

WMS 4,8 (30X9)R YE CUS 0800767 1

WMS 4,8 (60X9)R YE CUS 0800757 1

WMS 6,4 (30X10)R YE CUS 0800768 1

WMS 6,4 (60X10)R YE CUS 0800758 1

WMS 9,5 (30X16)R YE CUS 0800769 1

WMS 9,5 (60X16)R YE CUS 0800759 1

WMS 12,7 (60X20)R YE CUS 0800760 1

WMS 19,1 (60X30)R YE CUS 0800761 1

WMS 25,4 (60X40)R YE CUS 0800762 1

WMS 38,1 (60X60)R YE CUS 0800764 1

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 203

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Marking and labeling - MARKING system
Conductor and cable marking
Continuous shrink sleeve Can be printed with:

2
1
1
2
Thermal transfer for rolls

Shrinkable marker, white



Technical data
General data
Can be printed with: THERMOMARK W1  THERMOMARK W2  THERMOMARK
– The shrink sleeves are automatically ROLL  THERMOMARK ROLL X1  THERMOMARK X1.1  THER-
MOMARK X1.2
perforated or cut to the length required Material Polyolefine
in the printing process Temperature range [°C] -55 ... 135
– They are available in the form of continu- Wipe resistance DIN EN 61010-1 (VDE 0411-1)
Components Halogen-free
ous on-roll goods and can be printed on Shrink rate 3:1
both sides using the THERMOMARK W2 Ordering data
printer
– Individual markers can be cut to any Description   Type Order No.
Pcs. /
Pkt.
length up to 1 m
Shrink sleeve
The following standards are satisfied: 1 roll = 30 m, conductor diameter: 0.8 - 2.4 mm WMS 2,4 (EX4)R 0800289 1
– UL 224 (125°C, 600 V, VW-1)
1 roll = 30 m, conductor diameter: 1.0 - 3.2 mm WMS 3,2 (EX5)R 0800290 1
– CSA.C22.2 No. 198.1 (125°C, 600 V,
VW-1) 1 roll = 30 m, conductor diameter: 1.6 - 4.8 mm WMS 4,8 (EX9)R 0800291 1
– MIL-STD-202G, SAE AMS-DTL-23053, 1 roll = 25 m, conductor diameter: 2.1 - 6.4 mm WMS 6,4 (EX10)R 0800292 1
SAE AS-81531
1 roll = 20 m, conductor diameter: 3.2 - 9.5 mm WMS 9,5 (EX16)R 0800293 1
Notes:
1 roll = 20 m, conductor diameter: 4.2 - 12.7 mm WMS 12,7 (EX20)R 0800294 1
The special THEMOMARK-RIBBON ... WMSU is required for marking WMS ...
shrink sleeves, see Printers, page 38.
How to use the external media hubs: 1 roll = 20 m, conductor diameter: 6.4 - 19.1 mm WMS 19,1 (EX30)R 0800295 1
THERMOMARK ROLL:
Use the external THERMOMARK ROLL-ERH media hub for R rolls and the external 1 roll = 15 m, conductor diameter: 8.5 - 25.4 mm WMS 25,4 (EX40)R 0800296 1
THERMOMARK-ERH 500 for large rolls, see Printers, page 38.
THERMOMARK ROLL X1 and THERMOMARK W2: 1 roll = 15 m, conductor diameter: 12.7 - 38.1 mm WMS 38,1 (EX60)R 0800298 1
R rolls can be inserted directly in the device, use the THERMOMARK-ERH 500
for large rolls, see Printers, page 43. 1 roll = 15 m, conductor diameter: 16.9 - 50.8 mm WMS 50,8 (EX80)R 0800299 1

Shrink sleeve, large roll

1 roll = 120 m, conductor diameter: 0.8 - 2.4 mm WMS 2,4 (EX4)RL 0800319 1

1 roll = 120 m, conductor diameter: 1.0 - 3.2 mm WMS 3,2 (EX5)RL 0800320 1

1 roll = 120 m, conductor diameter: 1.6 - 4.8 mm WMS 4,8 (EX9)RL 0800321 1

1 roll = 100 m, conductor diameter: 2.1 - 6.4 mm WMS 6,4 (EX10)RL 0800322 1

1 roll = 80 m, conductor diameter: 3.2 - 9.5 mm WMS 9,5 (EX16)RL 0800324 1

1 roll = 80 m, conductor diameter: 4.2 - 12.7 mm WMS 12,7 (EX20)RL 0800325 1

1 roll = 80 m, conductor diameter: 6.4 - 19.1 mm WMS 19,1 (EX30)RL 0800326 1

1 roll = 60 m, conductor diameter: 8.5 - 25.4 mm WMS 25,4 (EX40)RL 0800327 1

204 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Marking and labeling - MARKING system
Conductor and cable marking

Shrinkable marker, yellow Shrinkable marker, black

Technical data Technical data

THERMOMARK W1  THERMOMARK W2  THERMOMARK THERMOMARK W1  THERMOMARK W2  THERMOMARK

ROLL  THERMOMARK ROLL X1  THERMOMARK X1.1  THER- ROLL  THERMOMARK ROLL X1  THERMOMARK X1.1  THER-
MOMARK X1.2 MOMARK X1.2
Polyolefine Polyolefine
-55 ... 135 -55 ... 135
DIN EN 61010-1 (VDE 0411-1) DIN EN 61010-1 (VDE 0411-1)
Halogen-free Halogen-free
3:1 3:1

Ordering data Ordering data

Pcs. / Pcs. /
Type Order No. Type Order No.
Pkt. Pkt.

WMS 2,4 (EX4)R YE 0800300 1 WMS 2,4 (EX4)R BK 0800415 1

WMS 3,2 (EX5)R YE 0800301 1 WMS 3,2 (EX5)R BK 0800416 1

WMS 4,8 (EX9)R YE 0800302 1 WMS 4,8 (EX9)R BK 0800418 1

WMS 6,4 (EX10)R YE 0800303 1 WMS 6,4 (EX10)R BK 0800419 1

WMS 9,5 (EX16)R YE 0800304 1 WMS 9,5 (EX16)R BK 0800421 1

WMS 12,7 (EX20)R YE 0800305 1 WMS 12,7 (EX20)R BK 0800422 1

WMS 19,1 (EX30)R YE 0800306 1 WMS 19,1 (EX30)R BK 0800423 1

WMS 25,4 (EX40)R YE 0800308 1 WMS 25,4 (EX40)R BK 0800424 1

WMS 38,1 (EX60)R YE 0800309 1 WMS 38,1 (EX60)R BK 0800425 1

WMS 50,8 (EX80)R YE 0800311 1 WMS 50,8 (EX80)R BK 0800426 1

WMS 2,4 (EX4)RL YE 0800328 1 WMS 2,4 (EX4)RL BK 0800427 1

WMS 3,2 (EX5)RL YE 0800329 1 WMS 3,2 (EX5)RL BK 0800428 1

WMS 4,8 (EX9)RL YE 0800330 1 WMS 4,8 (EX9)RL BK 0800429 1

WMS 6,4 (EX10)RL YE 0800331 1 WMS 6,4 (EX10)RL BK 0800430 1

WMS 9,5 (EX16)RL YE 0800332 1 WMS 9,5 (EX16)RL BK 0800431 1

WMS 12,7 (EX20)RL YE 0800333 1 WMS 12,7 (EX20)RL BK 0800432 1

WMS 19,1 (EX30)RL YE 0800334 1 WMS 19,1 (EX30)RL BK 0800434 1

WMS 25,4 (EX40)RL YE 0800335 1 WMS 25,4 (EX40)RL BK 0800435 1

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 205

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Marking and labeling - MARKING system
Conductor and cable marking
Continuous shrink sleeves, labeled ac-
cording to customer requirements
P R I NT E D
F OR YOU

Shrinkable marker, white

Technical data
General data
Material Polyolefine
All WMS ... continuous shrink sleeves can Temperature range [°C] -55 ... 135
also be supplied labeled according to cus- Wipe resistance DIN EN 61010-1 (VDE 0411-1)
Components Halogen-free
tomer requirements. Shrink rate 3:1

Ordering data
The following standards are satisfied:
– UL 224 (125°C, 600 V, VW-1) Description   Type Order No.
Pcs. /
Pkt.
– CSA.C22.2 No. 198.1 (125°C, 600 V,
Shrink sleeve, labeled according to customer requirements1)
VW-1) 1 roll = 30 m, conductor diameter: 0.8 - 2.4 mm WMS 2,4 (EX4)R CUS 0800701 1
– MIL-STD-202G, SAE AMS-DTL-23053,
1 roll = 30 m, conductor diameter: 1.0 - 3.2 mm WMS 3,2 (EX5)R CUS 0800702 1
SAE AS-81531
Figure below shows: 1 roll = 30 m, conductor diameter: 1.6 - 4.8 mm WMS 4,8 (EX9)R CUS 0800703 1
– SD-WMTB (70x10) label holder in com- 1 roll = 25 m, conductor diameter: 2.1 - 6.4 mm WMS 6,4 (EX10)R CUS 0800704 1
bination with WMS 6,4 (Ex10)R CUS
shrink sleeve for marking cables and con- 1 roll = 20 m, conductor diameter: 3.2 - 9.5 mm WMS 9,5 (EX16)R CUS 0800706 1

ductors; see page 221 1 roll = 20 m, conductor diameter: 4.2 - 12.7 mm WMS 12,7 (EX20)R CUS 0800707 1

Notes: 1 roll = 20 m, conductor diameter: 6.4 - 19.1 mm WMS 19,1 (EX30)R CUS 0800708 1
1) For ordering example, see page 359.
1 roll = 15 m, conductor diameter: 8.5 - 25.4 mm WMS 25,4 (EX40)R CUS 0800709 1

1 roll = 15 m, conductor diameter: 12.7 - 38.1 mm WMS 38,1 (EX60)R CUS 0800710 1

1 roll = 15 m, conductor diameter: 16.9 - 50.8 mm WMS 50,8 (EX80)R CUS 0800711 1

206 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Marking and labeling - MARKING system
Conductor and cable marking

P R I NT E D P R I NT E D
F OR YOU F OR YOU

Shrinkable marker, yellow Shrinkable marker, black

Technical data Technical data

Polyolefine Polyolefine
-55 ... 135 -55 ... 135
DIN EN 61010-1 (VDE 0411-1) DIN EN 61010-1 (VDE 0411-1)
Halogen-free Halogen-free
3:1 3:1

Ordering data Ordering data

Pcs. / Pcs. /
Type Order No. Type Order No.
Pkt. Pkt.

WMS 2,4 (EX4)R YE CUS 0800713 1 WMS 2,4 (EX4)R BK CUS 0800725 1

WMS 3,2 (EX5)R YE CUS 0800714 1 WMS 3,2 (EX5)R BK CUS 0800726 1

WMS 4,8 (EX9)R YE CUS 0800715 1 WMS 4,8 (EX9)R BK CUS 0800727 1

WMS 6,4 (EX10)R YE CUS 0800716 1 WMS 6,4 (EX10)R BK CUS 0800728 1

WMS 9,5 (EX16)R YE CUS 0800717 1 WMS 9,5 (EX16)R BK CUS 0800729 1

WMS 12,7 (EX20)R YE CUS 0800719 1 WMS 12,7 (EX20)R BK CUS 0800730 1

WMS 19,1 (EX30)R YE CUS 0800720 1 WMS 19,1 (EX30)R BK CUS 0800731 1

WMS 25,4 (EX40)R YE CUS 0800722 1 WMS 25,4 (EX40)R BK CUS 0800732 1

WMS 38,1 (EX60)R YE CUS 0800723 1 WMS 38,1 (EX60)R BK CUS 0800733 1

WMS 50,8 (EX80)R YE CUS 0800724 1 WMS 50,8 (EX80)R BK CUS 0800735 1

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 207

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Marking and labeling - MARKING system
Conductor and cable marking
Insertable conductor marking Can be printed with:
for marking collars
P R I NT E D
F OR YOU

2
11
2
Thermal transfer for rolls

For PATG ... and PATO ... marker carriers

Technical data
General data
Can be printed with: THERMOMARK ROLL  THERMOMARK ROLL X1  THERMO-
– EMT ... insert labels for labeling various MARK X1.1  THERMOMARK X1.2  THERMOMARK S1.1
Material Polyester
marking collars Temperature range [°C] -40 ... 120
– Can be printed onto with Wipe resistance DIN EN 61010-1 (VDE 0411-1)
THERMOMARK... for material off the roll Components free from silicone and halogen

– Thanks to their special contour, EMT ... Ordering data

insert labels remain securely inside the
Pcs. /
collar once inserted Description Color Type Order No.
Pkt.
– The PABL ... sheets are available to allow Insert strips,
labeling with a laser printer Lettering field size: 10 x 4 mm, 7500 labels p. roll
white EMT (10X4)R 0816235 1
Notes: Lettering field size: 15 x 4 mm, 7500 labels p. roll white EMT (15X4)R 0817329 1

PATG/PATO ... system, see page 224. red EMT (15X4)R RD 0816249 1

KMK ..., see page 216. yellow EMT (15X4)R YE 0817358 1
blue EMT (15X4)R BU 0817332 1
LM ..., see page 217.
Lettering field size: 23 x 4 mm, 5000 labels p. roll white EMT (23X4)R 0817361 1
1) For ordering example, see page 359.
yellow EMT (23X4)R YE 0817374 1
Lettering field size: 24 x 4 mm, 5000 labels p. roll white EMT (24X4)R 0816265 1

Lettering field size: 25 x 6 mm, 5000 labels p. roll white EMT (25X6)R 0817264 1

Lettering field size: 29 x 8 mm, 5400 labels p. roll white EMT (29X8)R 0817277 1

yellow EMT (29X8)R YE 0817280 1

Lettering field size: 40 x 17 mm, 2300 labels p. roll white EMT (40X17)R 0817293 1

Lettering field size: 60 x 15 mm, 2500 labels p. roll white EMT (60X15)R 0801846 10

Insert strips, for PATG/PATO, perforated, DIN A4 sheet, lettering

field size: 15 x 4 mm, 1 sheet = 360 labels

white PABL 15X4 0808260 10

Insert strips, labeled acc. to customer specifications1)
Lettering field size: 10 x 4 mm, 6 labels p. strip white EMT (10X4)R CUS 0824374 1

Lettering field size: 15 x 4 mm, 6 labels p. strip white EMT (15X4)R CUS 0824375 1

red EMT (15X4)R RD CUS 0824377 1

yellow EMT (15X4)R YE CUS 0824378 1
blue EMT (15X4)R BU CUS 0824376 1
Lettering field size: 23 x 4 mm, 4 labels p. strip white EMT (23X4)R CUS 0824379 1

yellow EMT (23X4)R YE CUS 0824380 1

Lettering field size: 24 x 4 mm, 4 labels p. strip white EMT (24X4)R CUS 0824381 1

Lettering field size: 25 x 6 mm, 4 labels p. strip white EMT (25X6)R CUS 0824382 1

Lettering field size: 29 x 8 mm, 3 labels p. strip white EMT (29X8)R CUS 0824383 1

yellow EMT (29X8)R YE CUS 0824384 1

Lettering field size: 40 x 17 mm, 3 labels p. strip white EMT (40X17)R CUS 0824385 1

Lettering field size: 60 x 15 mm, 1 label p. strip white EMT (60X15)R CUS 0801998 1

Insert strips, for PATG/PATO, perforated,

labeled acc. to customer specifications1)

white PABL 15X4 CUS 0824449 1

208 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Marking and labeling - MARKING system
Conductor and cable marking
Insertable conductor marking with Can be printed with:
threading and insertion aid
P R I NT E D
for marking collars
F OR YOU

2
11
2
Thermal transfer for rolls

For PATG ... and PATO... marker carriers

Technical data
General data
Can be printed with: THERMOMARK ROLL  THERMOMARK ROLL X1  THERMO-
– The WMTW... insert labels are used to la- MARK S1.1  THERMOMARK X1.1  THERMOMARK X1.2
Material Polyolefine
bel marking collars from the Temperature range [°C] -40 ... 90
PATG/PATO ... system; see page 224. Wipe resistance DIN EN 61010-1 (VDE 0411-1)
– Easy assembly thanks to a threading and Components Halogen-free

insertion aid, which can be easily separat- Ordering data

ed by means of a perforation after insert-
Pcs. /
ing the marker Description Color Type Order No.
Pkt.
– Thanks to their special shape, the Insertable conductor marking
WMTW ... insert labels remain securely Lettering field size: 10 x 4 mm, 3000 labels per roll white WMTW (10X4)R 0831000 1
inside the marking collar Lettering field size: 10 x 4 mm, 3000 labels per roll yellow WMTW (10X4)R YE 0831001 1
– Can be printed onto with
Lettering field size: 15 x 4 mm, 3000 labels per roll white WMTW (15X4)R 0831002 1
THERMOMARK... for material off the roll
– Labeling service: Phoenix Contact can Lettering field size: 15 x 4 mm, 3000 labels per roll yellow WMTW (15X4)R YE 0831003 1
custom-label all conductor markers in Lettering field size: 23 x 4 mm, 3000 labels per roll white WMTW (23X4)R 0831004 1
accordance with your requirements
Lettering field size: 23 x 4 mm, 3000 labels per roll yellow WMTW (23X4)R YE 0831005 1
Notes:
1) Insertable conductor marking, labeled according to customer
For ordering example, see page 359.
specifications1)

Lettering field size: 10 x 4 mm, 1 label per strip white WMTW (10X4)R CUS 0831008 1

Lettering field size: 10 x 4 mm, 1 label per strip yellow WMTW (10X4)R YE CUS 0831009 1

Lettering field size: 15 x 4 mm, 1 label per strip white WMTW (15X4)R CUS 0831010 1

Lettering field size: 15 x 4 mm, 1 label per strip yellow WMTW (15X4)R YE CUS 0831011 1

Lettering field size: 23 x 4 mm, 1 label per strip white WMTW (23X4)R CUS 0831007 1

Lettering field size: 23 x 4 mm, 1 label per strip yellow WMTW (23X4)R YE CUS 0831006 1

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 209

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Marking and labeling - MARKING system
Conductor and cable marking
Slide-on conductor marking Can be printed with:
P R I NT E D
F OR YOU

2
1
1
2
Thermal transfer for rolls

Marker for conductor diameters

from 1.0 to 8.4 mm

Technical data
General data
Can be printed with: THERMOMARK ROLL  THERMOMARK ROLL X1  THERMO-
– The conductor to be marked is pushed MARK X1.1  THERMOMARK X1.2  THERMOMARK S1.1
Number of individual labels 4000
through two punched holes in the marker Material Polyester
and positioned Temperature range [°C] -40 ... 120
– The special hole geometry ensures a Wipe resistance DIN EN 61010-1 (VDE 0411-1)
Components free from silicone and halogen
strong axial hold
– Made from high-quality polyester foil Ordering data
– Available for different conductor Pcs. /
Description Color Type Order No.
diameters Pkt.

– Custom labeling and easy handling Slide-on conductor markers, 1 roll = 4000 conductor markers
– High-quality labeling image created by Lettering field size: 15 x 4 mm, conductor diame- white WMT 2,4 (15X4)R 0816281 1
thermal transfer printing ter: 1.0 - 2.4 mm
Lettering field size: 15 x 5 mm, conductor diame- white WMT 3,5 (15X5)R 0817222 1
– Special packaging protects the conductor ter: 2.0 - 3.5 mm
markers against external influences, dust, Lettering field size: 15 x 6 mm, conductor diame- white WMT 4,2 (15X6)R 0817235 1
ter: 3.0 - 4.2 mm
and dirt Lettering field size: 15 x 8 mm, conductor diame- white WMT 5,5 (15X8)R 0817248 1
– Labeling service: Phoenix Contact can ter: 4.0 - 5.5 mm
custom-label all conductor markers in Lettering field size: 17 x 10 mm, conductor diame-
ter: 5.0 - 8.4 mm
white WMT 8,4 (17X10)R 0817251 1

accordance with your requirements Conductor marker for threading, labeled as per customer
specifications1)
Notes:
1) Lettering field size: 15 x 4 mm, conductor diame- white WMT 2,4 (15X4)R CUS 0824927 1
For ordering example, see page 359.
ter: 1.0 - 2.4 mm, 3 labels p. strip

Lettering field size: 15 x 5 mm, conductor diame- white WMT 3,5 (15X5)R CUS 0824928 1
ter: 2.0 - 3.5 mm, 3 labels p. strip

Lettering field size: 15 x 6 mm, conductor diame- white WMT 4,2 (15X6)R CUS 0824929 1
ter: 3.0 - 4.2 mm, 2 labels p. strip

Lettering field size: 15 x 8 mm, conductor diame- white WMT 5,5 (15X8)R CUS 0824930 1
ter: 4.0 - 5.5 mm, 2 labels p. strip

Lettering field size: 17 x 10 mm, conductor diame- white WMT 8,4 (17X10)R CUS 0824931 1
ter: 5.0 - 8.4 mm, 2 labels p. strip

210 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Marking and labeling - MARKING system
Conductor and cable marking
Conductor marking for assembly with Can be printed with:
cable binders
P R I NT E D
F OR YOU

2
1
1
2
Thermal transfer for rolls

Marker for conductor diameters

of 6 mm and above

Technical data
General data
Can be printed with: THERMOMARK ROLL  THERMOMARK ROLL X1  THERMO-
– Conductor marking for identifying and MARK X1.1  THERMOMARK X1.2  THERMOMARK S1.1
Material Polyester
bundling conductors in indoor areas Temperature range [°C] -40 ... 120
– Made from high-quality polyester foil Wipe resistance DIN EN 61010-1 (VDE 0411-1)
– The marker has two fastening eyes so that Components free from silicone and halogen

it can be attached to the conductor by Ordering data

means of PKB ... cable binders
Pcs. /
– Labeling service: Phoenix Contact can Description Color Type Order No.
Pkt.
custom-label all conductor markers in Cable markers for assembly with cable binders
accordance with your requirements Lettering field size: 24 x 8 mm (max. cable binder white WMTB (24X8)R 0816278 1
width: 5 mm), 4000 cable markers p. roll
Notes:
Lettering field size: 35 x 15 mm (max. cable binder white WMTB (35X15)R 0817316 1
For corresponding cable binders, see page 574 onwards. width: 5 mm), 1700 cable markers p. roll
1) For ordering example, see page 359.
Cable marker for assembly with cable binders, labeled
according to customer specifications1)

Lettering field size: 24 x 8 mm (max. cable binder white WMTB (24X8)R CUS 0824932 1
width: 5 mm), 4 labels p. strip

Lettering field size: 35 x 15 mm (max. cable binder white WMTB (35X15)R CUS 0824933 1
width: 5 mm), 2 labels p. strip

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 211

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Marking and labeling - MARKING system
Conductor and cable marking
Conductor marking Can be printed with:
for assembly with cable binders
P R I NT E D
F OR YOU

2
11
2
Thermal transfer for rolls

Marker for conductor diameters

of 6 mm and above

Technical data
General data
Can be printed with: THERMOMARK ROLL  THERMOMARK ROLL X1  THERMO-
Halogen-free conductor and cable mark- MARK X1.1  THERMOMARK X1.2  THERMOMARK S1.1
Material PUR
ing for marking and bundling conductors Inflammability class according to UL 94 V0
and cables indoors and outdoors. Temperature range [°C] -25 ... 80
– Made from high-quality thermoplastic Wipe resistance DIN EN 61010-1 (VDE 0411-1)
Components Halogen-free
polyether urethane
– Highly flexible material, adapts to the Ordering data
bending of the conductors or cables Pcs. /
Description Color Type Order No.
– Additional labeling, such as project Pkt.

information, can be printed on the carrier Cable markers for assembly with cable binders, maximum
cable binder width: 5 mm
material. This makes it easier to assign the 1000 markers per roll, lettering field size: white WMTB HF (40X12)R 0830407 1
markers during mounting. 40 x 12 mm
yellow WMTB HF (40X12)R YE 0830408 1
– Very high tensile strength 1000 markers per roll, lettering field size: white WMTB HF (55X15)R 0830409 1
– Flame-retardant material 55 x 15 mm
– The marker has two fastening lugs so that yellow WMTB HF (55X15)R YE 0830410 1
500 markers per roll, lettering field size: white WMTB HF (55X25)R 0830411 1
it can be attached to the conductor by 55 x 25 mm
means of cable binders yellow WMTB HF (55X25)R YE 0830412 1
Cable markers for assembly with cable bind- white WMTB HF (40X12)R CUS 0830413 1
– Labeling service: Phoenix Contact can ers, labeled according to customer specifica-
custom-label all conductor markers in tions, 1 marker per strip, lettering field size:
40 x 12 mm1)
accordance with your requirements yellow WMTB HF (40X12)R YE CUS 0830414 1
1 marker per strip, lettering field size: 55 x 15 mm white WMTB HF (55X15)R CUS 0830415 1
Notes:
For corresponding cable binders, see page 574 onwards. yellow WMTB HF (55X15)R YE CUS 0830416 1
1)
1 marker per strip, lettering field size: 55 x 25 mm white WMTB HF (55X25)R CUS 0830417 1
For ordering example, see page 359.
yellow WMTB HF (55X25)R YE CUS 0830418 1

Accessories
Ink ribbon, specifically for cable markers for assembly with cable
binders, WMTB HF..., length: 300 m, width: 110 mm

black THERMOMARK-RIBBON 110-WMTB 5148007 1

HF

212 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Marking and labeling - MARKING system
Conductor and cable marking
Conductor marker carriers for
assembly with cable binders, for labels
with laminated protective foil

For conductor diameters from 6 mm

Technical data
General data
Material PVC/polyester
– The WM-CARRIER /B... conductor Temperature range [°C] -10 ... 60
marker carriers consist of a labeling field Wipe resistance DIN EN 61010-1 (VDE 0411-1)
Components Halogen-free
for labels and a transparent, self-adhesive
laminated protective foil Ordering data
– The protective foil provides permanent Description Color Type Order No.
Pcs. /
protection against contamination and Pkt.

abrasion Conductor marker carriers, maximum cable binder width: 5 mm

– High-quality labeling image created by Lettering field size: 48 x 10 mm transparent WM-CARRIER/B (48X10)LPR 0830423 100
thermal transfer printing Lettering field size: 55 x 15 mm transparent WM-CARRIER/B (55X15)LPR 0830424 100
Lettering field size: 85 x 15 mm transparent WM-CARRIER/B (85X15)LPR 0830425 100
– Quick and easy handling
– The marker has two fastening lugs so that Accessories
it can be attached to the conductor by Labels
2500 labels per roll white EML (40X6)R 0830481 1
means of cable binders yellow EML (40X6)R YE 0830482 1
– Resistant to solvents 2500 labels per roll white EML (50X10)R 0830483 1
– Labeling service: Phoenix Contact can yellow EML (50X10)R YE 0830484 1
2500 labels per roll white EML (75X10)R 0830485 1
custom-label all cable marker labels in yellow EML (75X10)R YE 0830486 1
accordance with your requirements Labels, labeled according to customer requirements1)
2 labels per strip white EML (40X6)R CUS 0830487 1
Notes: yellow EML (40X6)R YE CUS 0830488 1
For corresponding cable binders, see page 574 onwards. 1 label per strip white EML (50X10)R CUS 0830489 1
yellow EML (50X10)R YE CUS 0830490 1
1) For ordering example, see page 359. 1 label per strip white EML (75X10)R CUS 0830491 1
yellow EML (75X10)R YE CUS 0830492 1

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 213

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Marking and labeling - MARKING system
Conductor and cable marking
Plastic cable marker for insert labels, Notes:
for assembly with cable binders For corresponding cable binders, see page 574 onwards.

25 x 6 mm marker

Technical data
General data
Material Polyethylene
– The KMK... versions have eyelets and are Temperature range [°C] -40 ... 80
attached with cable binders Components free from silicone and halogen

– Plastic cable markers for marking and Ordering data

bundling multiple conductors and cables Pcs. /
indoors Description Color Type Order No.
Pkt.
– The printed insert label is protected from Plastic cable markers for insert labels,
dirt by the sealing cap with eyelets for fastening with cable binders
Lettering field size: 25 x 6 mm transparent KMK 1 0830745 100
– Labeling service: Phoenix Contact can Plastic cable markers for insert labels,
custom-label all insert labels for plastic with eyelets for fastening with cable binders
Lettering field size: 29 x 8 mm transparent
cable markers in accordance with your Plastic cable markers for insert labels,
requirements with eyelets for fastening with cable binders
Lettering field size: 40 x 17 mm transparent
Plastic cable markers for insert labels,
with eyelets for fastening with cable binders
Lettering field size: 60 x 15 mm transparent

Accessories
Insert strips for laser printers, DIN A4, perforated

Lettering field size: 25 x 6 mm, 1 sheet = 252 labels ESL (25X6) 0801849 10

Lettering field size: 29 x 8 mm, 1 sheet = 174 labels

Lettering field size: 40 x 17 mm, 1 sheet = 56 labels

Lettering field size: 60 x 15 mm, 1 sheet = 51 labels

Insert labels for thermal transfer printers

Lettering field size: 25 x 6 mm, 5000 labels per roll EMT (25X6)R 0817264 1

Lettering field size: 29 x 8 mm, 5400 labels p. roll

Lettering field size: 40 x 17 mm, 2300 labels p. roll

Lettering field size: 60 x 15 mm, 2500 labels per roll

UniSheet, 0.5 mm thick

84-section, lettering field size: 25 x 6 mm US-EMP (25X6)-1 0802754 10
48-section, lettering field size: 29 x 8 mm
16-section, lettering field size: 40 x 17 mm
9-section, lettering field size: 60 x 15 mm

214 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Marking and labeling - MARKING system
Conductor and cable marking

29 x 8 mm markers 40 x 17 mm markers 60 x 15 mm markers

Technical data Technical data Technical data

Polyethylene Polyethylene Polyethylene

-40 ... 80 -40 ... 80 -40 ... 80
free from silicone and halogen free from silicone and halogen free from silicone and halogen

Ordering data Ordering data Ordering data

Pcs. / Pcs. / Pcs. /

Type Order No. Type Order No. Type Order No.
Pkt. Pkt. Pkt.

KMK 2 1005266 100

KMK 4 1005305 50

KMK 5 0830746 50

Accessories Accessories Accessories

ESL 29X 8 0808257 10

ESL 40X17 0808095 10

ESL (60X15) 0801851 10

EMT (29X8)R 0817277 1

EMT (40X17)R 0817293 1

EMT (60X15)R 0801846 10

US-EMP (29X8) 0829436 10

US-EMP (40X17) 0829437 10
US-EMP (60X15) 0828781 10

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 215

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Marking and labeling - MARKING system
Conductor and cable marking
Plastic cable marker for insert labels, Notes:
for assembly with cable binders For corresponding cable binders, see page 574 onwards.

For insert labels measuring 29 x 8 mm

Technical data
General data
Material Polyethylene
– Plastic cable markers for marking and Temperature range [°C] -40 ... 80
bundling multiple conductors and cables Components free from silicone and halogen

indoors Ordering data

– The printed insert label is protected from Pcs. /
dirt by the sealing cap Description Color Type Order No.
Pkt.
– Labeling service: Phoenix Contact can Plastic cable markers for insert labels, with cable binders
custom-label all insert labels for plastic ca- with a pointed end, can be labeled with ESL..., EMT...
or US-EMP... insert labels, diameter: 10 ... 25 mm,
ble markers in accordance with your re- lettering field size: 29 x 8 mm
quirements
transparent KMK 1005208 100
Plastic cable markers for insert labels, with cable binders
with a pointed end, can be labeled with ESL..., EMT...
or US-EMP... insert labels, diameter: 16 ... 35 mm,
lettering field size: 40 x 17 mm

transparent
Cable and conductor markers for insert labels,
can be labeled with EST or ESL, diameter of 1 - 12 mm,
lettering field size: 24 x 4 mm

white
Cable and conductor markers for labels,
lettering field size: 20 x 8 mm

white

Accessories
Insert strips for laser printers, DIN A4, perforated

Lettering field size: 29 x 8 mm, 1 sheet = 174 labels ESL 29X 8 0808257 10

Lettering field size: 40 x 17 mm, 1 sheet = 56 labels

Lettering field size: 24 x 4 mm, 1 sheet = 488 labels

Insert labels for thermal transfer printers

Lettering field size: 29 x 8 mm, 5400 labels p. roll EMT (29X8)R 0817277 1

Lettering field size: 40 x 17 mm, 2300 labels p. roll

Lettering field size: 24 x 4 mm, 5000 labels p. roll

UniSheet, 0.5 mm thick

48-section, lettering field size: 29 x 8 mm US-EMP (29X8) 0829436 10
16-section, lettering field size: 40 x 17 mm
Textile label, lettering field size: 20 x 8 mm
2500 labels p. roll
2500 labels p. roll

216 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Marking and labeling - MARKING system
Conductor and cable marking

For insert labels measuring 40 x 17 mm For insert labels, For adhesive labels,
12 mm conductor diameter conductor diameter of up to 20 mm

Technical data Technical data Technical data

Polyethylene PA PA
-40 ... 80 -40 ... 100 -40 ... 100
free from silicone and halogen free from silicone and halogen free from silicone and halogen

Ordering data Ordering data Ordering data

Pcs. / Pcs. / Pcs. /

Type Order No. Type Order No. Type Order No.
Pkt. Pkt. Pkt.

KMK 3 1005211 50

LM 1004377 100

KME 0807083 50

Accessories Accessories Accessories

ESL 40X17 0808095 10

ESL 24X 4 0808231 10

EMT (40X17)R 0817293 1

EMT (24X4)R 0816265 1

US-EMP (40X17) 0829437 10

EMLC (20X8)R 0815680 1

EML (20X8)R 0816786 1

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 217

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Marking and labeling - MARKING system
Conductor and cable marking
GKM ... conductor markers

Conductor diameter from 0 to 5.2 mm

Technical data
General data
Material PA/ABS
– The GKM ... conductor markers support Temperature range [°C] -40 ... 80
large-surface conductor labeling Components free from silicone and halogen

– Flexible application, thanks to Ordering data

spring-loaded conductor attachment Pcs. /
– Particularly suitable for temporary Description Color Type Order No.
Pkt.
labeling Conductor markers, lettering field size: 20 x 8 mm
– Quick and easy to use for conductor diameters of 0 - 2.5 mm gray GKM 1 GY 1750498 100

For conductor diameters of 4.8 - 11 mm gray

Accessories
Marker tags, 5-section, unprinted, labeling with X-PEN, M-PEN,
plotter or BKMT 20 x 8 label

Lettering field size: 20 x 8 mm white SS-ZB WH 5031171 50

Lettering field size: 20 x 8 mm yellow SS-ZB YE 5031650 50
UniCard, for labeling devices from the following manufacturers:
ABB, Conta Clip, Escha, Festo, ifm-electronik, Harting, Moeller,
Phoenix Contact, Siemens

Lettering field size: 20 x 9 mm white UC-EM (20X9) 0825503 10

Lettering field size: 20 x 9 mm yellow UC-EM (20X9) YE 0827637 10
Lettering field size: 20 x 9 mm white UCT-EM (20X9) 0801471 10
Lettering field size: 20 x 9 mm yellow UCT-EM (20X9) YE 0801472 10

218 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Marking and labeling - MARKING system
Conductor and cable marking

Conductor diameter from 4.8 to 11 mm

Technical data

PA/ABS
-40 ... 80
free from silicone and halogen

Ordering data

Pcs. /
Type Order No.
Pkt.

GKM 2 GY 1750485 100

Accessories

SS-ZB WH 5031171 50
SS-ZB YE 5031650 50

UC-EM (20X9) 0825503 10

UC-EM (20X9) YE 0827637 10
UCT-EM (20X9) 0801471 10
UCT-EM (20X9) YE 0801472 10

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 219

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Marking and labeling - MARKING system
Conductor and cable marking

Type keys for SD-WMTBS ...

Example 0826514 SD-WMTBS (S) YE

0826514 SD-WMTBS (S) YE

Order No. Product type Printing Color

0826637 SD-WMTBS (NEUTRAL) CC (NEUTRAL) = unprinted CC = international color code

0826514 SD-WMTBS (S) YE (S) = printed with numbers 0 - 9 YE = yellow
0826611: letter SD-WMTBS (CH) YE (CH) = letters A - Z YE = yellow
0826624: symbol SD-WMTBS (SY) YE (SY) = symbols + - / . GND YE = yellow
0826527 SD-WMTBS (NU) CC (NU) = printed with numbers 0 - 9 CC = international color code

International color code

Print Marker color Font color

0 Black White
1 Brown White
2 Red White
3 Orange Black
4 Yellow Black
5 Green White
6 Blue White
7 Violet White
8 Gray Black
9 White Black

220 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Marking and labeling - MARKING system
Conductor and cable marking
Cable marking for carrier assembly Notes:
The label holder is attached using cable binders; for correspond-
ing cable binders up to 4.8 mm wide, see page 574 onwards.
1) For an ordering example, see page 220.

Conductor diameter > 16 mm

Technical data
General data
Material PVC
– Cable markers for marking cables and Inflammability class according to UL 94 V2
conductors with larger cross sections Temperature range [°C] -30 ... 60
Wipe resistance DIN EN 61010-1 (VDE 0411-1)
– The printed individual markers are Components Free from silicone and cadmium
pushed onto the corresponding holders Ordering data
– Figure below shows: SD-WMTB (70x10)
label holder in combination with WMS Description Color Type Order No.
Pcs. /
Pkt.
6,4 (Ex10)R CUS shrink sleeve for
Cable marker1)
marking cables and conductors
International color code, unprinted International SD-WMTBS (NEUTRAL) CC 0826637 100
color code
printed: with numbers 0-9 yellow SD-WMTBS (S) YE 0826514 100
printed: with upper case letters A-Z yellow SD-WMTBS (CH) YE 0826611 100
printed: with symbols + - / . GND yellow SD-WMTBS (SY) YE 0826624 100
International color code, printed: International SD-WMTBS (NU) CC 0826527 100
With numbers between 0-9 color code
Label holder, for cable binders up to 4.8 mm wide

For max. 7 characters black SD-WMTB (70X10) 0826530 100

For max. 13 characters black SD-WMTB (100X10) 0826543 100

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 221

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Marking and labeling - MARKING system
Conductor and cable marking
Stainless steel cable marking Notes:
for carrier assembly For further stainless steel cable binders, see page 580.
1) For ordering example, see page 220.

Stainless steel marker with carrier

Technical data
General data
Material Stainless steel
– Cable markers for marking cables and
Ordering data
conductors with larger cross sections
– The individual stainless steel markers are Description Color Type Order No.
Pcs. /
Pkt.
pushed onto the corresponding holders
Cable marker1)
– They are secured using stainless steel
cable binders unprinted silver SD-WMTBS (NEUTRAL) VA 0826666 50
– Easy assembly with UNIFOX-CT M7,9 printed: with numbers 0-9 silver SD-WMTBS (NU) VA 0826556 50
printed: with upper case letters A-Z silver SD-WMTBS (CH) VA 0826640 50
printed: with symbols + - / . GND silver SD-WMTBS (SY) VA 0826653 50
Label holder
For max. 6 characters silver SD-WMTB (30X10) VA 0826569 50
For max. 9 characters silver SD-WMTB (47X10) VA 0826572 50
For max. 13 characters silver SD-WMTB (70X10) VA 0826585 50
For max. 17 characters silver SD-WMTB (92X10) VA 0826598 50
For max. 20 characters silver SD-WMTB (111X10) VA 0826608 50

Accessories
Cable binder, made of stainless steel (AISI 304), width 4.6 mm,
maximum bundle Ø [mm]/minimum tensile strength [N]

30 / 890 silver WT-STEEL S 4,6X150 3240807 100

50 / 890 silver WT-STEEL S 4,6X201 3240808 100

222 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Marking and labeling - MARKING system
Conductor and cable marking
Stainless steel cable marking for Notes:
embossing or laser engraving For further stainless steel cable binders, see page 580.
P R I NT E D
F OR YOU

Stainless steel plate

Technical data
General data
Material Stainless steel
– Cable markers for marking cables and
Ordering data
conductors with larger cross sections
– The individual stainless steel markers are Description Color Type Order No.
Pcs. /
Pkt.
pushed onto the corresponding holders
Steel cable markers, rustproof, non-magnetic,
– They are secured using stainless steel label size: 89 x 19 mm, lettering field size: 65 x 19 mm
cable binders
silver KMV 0806644 100
– Easy assembly with UNIFOX-CT M7,9 Lased acc. to customer specifications silver KMV CUS 0828493 1
Steel cable markers, rustproof, non-magnetic,
label size: 44 x 9.6 mm, lettering field size: 23 x 9 mm

silver KMV 44X9,6 0812007 100

Lased acc. to customer specifications silver KMV 44X9,6 CUS 0828494 1

Accessories
Cable binder, made of stainless steel (AISI 304), width 4.6 mm,
maximum bundle Ø [mm]/minimum tensile strength [N]

30 / 890 silver WT-STEEL S 4,6X150 3240807 100

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 223

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Marking and labeling - MARKING system
Conductor and cable marking
Marking collars for insert labels

Closed marker carrier, for sliding on

Technical data
General data
Material PVC
– These conductor marking systems consist Inflammability class according to UL 94 V0
of marker carriers and insert labels Temperature range [°C] -50 ... 80
Components Silicone-free
– The PATG ... collar is a captive marker
carrier Ordering data
– Can be used to mark conductors with a Description Color Type Order No.
Pcs. /
diameter of 0.6 ... 50 mm Pkt.

– Marking is performed using the matching Wire marker carrier, closed, 10 mm wide

UC-WMT ..., US-WMT ..., and Conductor diameter: 0.6-1.2 mm transparent PATG 0/10 1013795 1000
EMT ...insert labels Conductor diameter: 1.5-2.5 mm transparent PATG 1/10 1013805 1000
Conductor cross section: 2.0-4.0 mm transparent PATG 2/10 1013818 1000
Conductor cross section: 4.0-7.0 mm transparent PATG 3/10 1013821 500
Wire marker carrier, closed, 12 mm wide

Conductor diameter: 0.6-1.2 mm transparent PATG 0/12 0827076 1000

Conductor diameter: 1.5-2.5 mm transparent PATG 1/12 0827077 1000
Conductor cross section: 2.0-4.0 mm transparent PATG 2/12 0827078 1000
Conductor cross section: 4.0-7.0 mm transparent PATG 3/12 0827079 500
Conductor cross section: 6.0-10.0 mm transparent PATG 4/12 0827080 500
Wire marker carrier, closed, 15 mm wide

Conductor diameter: 0.6-1.2 mm transparent PATG 0/15 1013740 1000

Conductor diameter: 1.5-2.5 mm transparent PATG 1/15 1013025 1000
Conductor cross section: 2.0-4.0 mm transparent PATG 2/15 1013038 1000
Conductor cross section: 4.0-7.0 mm transparent PATG 3/15 1013041 500
Conductor cross section: 6.0-10.0 mm transparent PATG 4/15 1013054 500
Conductor cross section: 10.0-14.0 mm transparent PATG 5/15 1013067 200
Conductor cross section: 14.0-22.0 mm transparent PATG 6/15 1013070 200
Conductor cross section: 22.0-30.0 mm transparent PATG 7/15 1013083 50
Conductor cross section: 30.0-35.0 mm transparent PATG 8/15 1013096 50
Conductor diameter: 35.0 - 45.0 mm transparent PATG 9/15 1013106 50
Wire marker carrier, closed, 18 mm wide

Conductor diameter: 0.6-1.2 mm transparent PATG 0/18 0820507 1000

Conductor diameter: 1.5-2.5 mm transparent PATG 1/18 0820510 1000
Conductor cross section: 2.0-4.0 mm transparent PATG 2/18 0820523 1000
Conductor cross section: 4.0-7.0 mm transparent PATG 3/18 0820536 500
Conductor cross section: 6.0-10.0 mm transparent PATG 4/18 0820549 500
Conductor cross section: 10.0-14.0 mm transparent PATG 5/18 0828059 200
Conductor cross section: 14.0-22.0 mm transparent PATG 6/18 0828062 200
Wire marker carrier, closed, 23 mm wide

Conductor diameter: 0.6-1.2 mm transparent PATG 0/23 0828046 1000

Conductor diameter: 1.5-2.5 mm transparent PATG 1/23 1013847 1000
Conductor cross section: 2.0-4.0 mm transparent PATG 2/23 1013850 500
Conductor cross section: 4.0-7.0 mm transparent PATG 3/23 1013863 500
Conductor cross section: 6.0-10.0 mm transparent PATG 4/23 0808011 200
Conductor cross section: 10.0-14.0 mm transparent PATG 5/23 0808024 200
Conductor cross section: 14.0-22.0 mm transparent PATG 6/23 0808037 100
Conductor cross section: 22.0-30.0 mm transparent PATG 7/23 0808040 50
Conductor cross section: 30.0-35.0 mm transparent PATG 8/23 0808053 50
Wire marker carrier, closed, 30 mm wide

Conductor diameter: 1.5-2.5 mm transparent PATG 1/30 0822440 500

Conductor cross section: 2.0-4.0 mm transparent PATG 2/30 0822453 500
Conductor cross section: 4.0-7.0 mm transparent PATG 3/30 0822466 200
Conductor cross section: 6.0-10.0 mm transparent PATG 4/30 0822479 200
Conductor cross section: 10.0-14.0 mm transparent PATG 5/30 0822482 200

224 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Marking and labeling - MARKING system
Conductor and cable marking
Marking collars for insert labels

– Can be labeled using UC-WMT ...,

US-WMT ... plastic labels or EMT ...
insert strips
PATO ...
– These marking collars are used for
subsequent labeling of systems that have
already been wired
PAB-KTL ...
– Marking collars for identifying and Open marker carrier, for clipping on For assembly with cable binders
bundling conductors

Technical data Technical data

General data
Material PVC PVC
Inflammability class according to UL 94 V0 V0
Temperature range [°C] -50 ... 80 -50 ... 80
Components Silicone-free Silicone-free

Ordering data Ordering data

Pcs. / Pcs. /
Description Color Type Order No. Type Order No.
Pkt. Pkt.
Wire marker carrier, open, 10 mm wide

Conductor cross section: 2.0-3.5 mm transparent PATO 1/10 1013876 1000

Conductor diameter: 2.8 - 4.4 mm transparent PATO 2/10 1013889 1000
Wire marker carrier, open, 12 mm wide

Conductor cross section: 2.0-3.5 mm transparent PATO 1/12 0827081 1000

Conductor diameter: 2.8 - 4.4 mm transparent PATO 2/12 0827082 1000
Wire marker carrier, open, 15 mm wide

Conductor cross section: 2.0-3.5 mm transparent PATO 1/15 1013119 1000

Conductor diameter: 2.8 - 4.4 mm transparent PATO 2/15 1013122 1000
Conductor diameter: 6.7 - 8.0 mm transparent PATO 3/15 1013135 500
Conductor diameter: 6.7 - 10.0 mm transparent PATO 4/15 1013148 500
Wire marker carrier, open, 18 mm wide

Conductor cross section: 2.0-3.5 mm transparent PATO 1/18 0823740 500

Conductor diameter: 2.8 - 4.4 mm transparent PATO 2/18 0823753 500
Wire marker carrier, open, 23 mm wide

Conductor cross section: 2.0-3.5 mm transparent PATO 1/23 1013892 500

Conductor diameter: 2.8 - 4.4 mm transparent PATO 2/23 1013902 500
Wire marker carrier, open, 30 mm wide

Conductor cross section: 2.0-3.5 mm transparent PATO 1/30 0822495 500

Conductor diameter: 2.8 - 4.4 mm transparent PATO 2/30 0822505 500
Cable marker carrier, lettering field along the
length of cable, labeling with UC-WMT and PABA....,
lettering field: 30 x 4 mm, is secured with PKB cable
binder
transparent PAB-KTL 1013261 200
Lettering field size: 23 x 4 mm, labeling with UC- transparent PAB-KTL 23 1013957 200
WMT and PABA.../23
Plastic cable marker for PKE insert label, can be
labeled with PKE insert label, labeling field: 9 mm x 20 mm,
with eyelets for fastening to PKB cable binder

transparent PKT 9X20 0803977 240

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 225

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
226 PHOENIX CONTACT
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Device marking - MARKING system

Identifying electrical and electronic con-    

Product range overview  
trol cabinets does not just make service
work easier. In some sectors, it is actually a    
Device marking 228
mandatory requirement. Moreover, equip-
ment identification improves the quality of    
the control cabinets and systems. EM... AL aluminum device marking  
Phoenix Contact offers a variety of differ-   Designed to be stuck on, screwed in or riveted or snapped into 231 
ent markers for device marking. From adhe- marker carriers
sive labels to high-quality engraving labels,
the wide marker range caters for every ap-    
plication. UniCard UC-EM... and UCT-EM... device marking  
A variety of printing systems is available
for labeling or engraving.   Designed to be stuck on, screwed in or riveted or snapped into 234 
marker carriers

  Snap-in, for devices from Phoenix Contact and other 246 

manufacturers

   
UniSheet US-EM... device marking  
  Designed to be stuck on, screwed in or riveted or snapped into 258 
marker carriers, labels, and combi labels

   
EM... device marking, labels supplied in rolls  

  Labels for buttons, continuous and textile labels, labels for rough 270 
surfaces, for high-temperature and ESD applications, removable
labels, labels with anti-tamper protection

  Insert strips for devices from Phoenix Contact and other 290 
manufacturers

   
BMK... device marking, labels supplied as DIN A sheets 292

   
GPE and EMLP... device marking, markers for printing 294
or engraving

   
Marker carriers and profiles 296
   
Device marking overview  
  The right marking solution for every device   
  Phoenix Contact 302 
  Other manufacturers 304 
   
Ordering example for labeling service - printed for you 359

PHOENIX CONTACT 227

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Marking and labeling - MARKING system
Device marking

Explicit marking of electrical and Phoenix Contact offers a wide range of The self-adhesive labels are made from a
electronic control cabinet components is labels and tags. Depending on the type, they two-layer material and are highly durable,
essential for safe and efficient work. As with can be labeled using BLUEMARK, thermal e.g., where buttons and switches are subject
comprehensive technical documentation, transfer printers, the plotter, engraving de- to frequent use. The best way to mark these
labeling all operating equipment increases vices, commercially available desktop laser labels is to use the engraving device of the
the availability of the switchgear and simpli- printers or by hand. CMS-P1-PLOTTER plotter.
fies maintenance. For the BLUEMARK CLED and Please contact us if you are unable to find
Last but not least, equipment identification THERMOMARK CARD, there is a com- a suitable size or color for your application
improves the quality of the control cabinets plete range of plastic labels available for from the options available in our product
and systems. control cabinets as well as for buttons and range.
switchgear. It goes without saying that Phoenix Contact
The labels of all the various printing systems also offers a comprehensive engraving and
feature a high level of wipe and scratch re- labeling service for device marking applica-
sistance. tions. Test us out!

228 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Marking and labeling - MARKING system
Device marking

Device markers are available in various Drilled labels are available for marking de- The CARRIER labeling system is the per-
sizes, materials, and colors. The self-adhe- vices and control cabinets. These can be se- fect choice for labeling buttons. It consists
sive labels have been designed for use in a curely attached to the device using screws of a carrier plus marking label and can be
wide temperature range. or rivets. used in control cabinets as well as in the
field.

High-temperature labels are ideal for Tamper-proof labels are used as rating GPE label sheets consist of a two-layer
marking PCBs. These labels can safely and plates or seals. When they are peeled off, material that is ideal for engraving. However,
permanently withstand temperatures of - part of the metallic layer comes away, leav- the pre-fabricated self-adhesive labels can
40°C to 180°C; or a temperature of  300°C ing behind a pattern on both the label and also be labeled directly by hand or using a
for up to 60 seconds. the surface. plotter.

In the case of small print volumes, labels The self-adhesive markers are available in Self-adhesive marker carriers are used in
can also be printed using commercially avail- various shapes and sizes. They can be used conjunction with marking labels for the
able desktop laser printers. Copy sheets are to mark components, devices, and buttons purpose of labeling devices and modules.
provided with margins to make it easier to and are highly resistant to chemical and The carriers can be stuck onto all standard
remove individual labels. mechanical effects. surfaces.

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 229

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Marking and labeling - MARKING system
Device marking
Stick-on aluminum device marking Can be printed with:

UV
UV LED technology

General data
Can be printed with:
– The aluminum EMLP-AL product range – A wide range of different marker sizes is Material
includes self-adhesive device markers available for custom designs. Formats from Wipe resistance

with a high adhesive strength and is char- 27 x 15 to 100 x 60 mm cover the entire
acterized by the following: range of device and system marking
– The markers can be labeled quickly, easily, Description Color

and cost-effectively with the Marking label, aluminum, self-adhesive, 0.8 mm thick
BLUEMARK CLED
Lettering field size: 27 x 15 mm silver
– Labeling service: Phoenix Contact can Lettering field size: 27 x 18 mm silver
custom-label EMLP ... markers according Lettering field size: 49 x 15 mm silver
Lettering field size: 60 x 15 mm silver
to your requirements Lettering field size: 60 x 30 mm silver
Lettering field size: 85.6 x 54 mm silver
Lettering field size: 100 x 60 mm silver
Marking label, aluminum, self-adhesive, 0.8 mm thick,
labeled according to customer specifications1)
Lettering field size: 27 x 15 mm silver
Lettering field size: 27 x 18 mm silver
Lettering field size: 49 x 15 mm silver
Lettering field size: 60 x 15 mm silver
Lettering field size: 60 x 30 mm silver
Lettering field size: 85.6 x 54 mm silver
Lettering field size: 100 x 60 mm silver

Magazine, for BLUEMARK CLED

for accommodating EMP-AL (27X15), EMLP-AL (27X15)

for accommodating EMP-AL (27X18), EMLP-AL (27X18)

for accommodating EMP-AL (49X15), EMLP-AL (49X15),

EMSP-AL (39X15)
for accommodating EMP-AL (60X15), EMLP-AL (60X15),
EMSP-AL (50X15)
for accommodating EMP-AL (60X30), EMLP-AL (60X30),
EMSP-AL (50X30)
for accommodating EMP-AL (85,6X54), EMLP-AL (85,6X54),
EMSP-AL (75,6X54)
for accommodating EMLP-AL (100X60), EMSP-AL (90X60)

– By using modern UV LED printing tech- – In conjunction with magazines, optimum

nology, a highly resistant and optimum printing accuracy is guaranteed
printing quality can be achieved, which is
resistant to solvents and suitable for use
even under harsh industrial conditions

Notes:
1) For ordering example, see page 359.

230 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Marking and labeling - MARKING system
Device marking

P R I NT E D
F OR YOU

Unlabeled Labeled according to customer specifications

Technical data Technical data

BLUEMARK CLED -
Aluminum Aluminum
DIN EN 61010-1 (VDE 0411-1) DIN EN 61010-1 (VDE 0411-1)

Ordering data Ordering data

Pcs. / Pcs. /
Type Order No. Type Order No.
Pkt. Pkt.

EMLP-AL (27X15) 0830508 90

EMLP-AL (27X18) 0830509 90
EMLP-AL (49X15) 0830511 45
EMLP-AL (60X15) 0830512 45
EMLP-AL (60X30) 0830513 45
EMLP-AL (85,6X54) 0830514 15
EMLP-AL (100X60) 0830515 15

EMLP-AL (27X15) CUS 0830516 1

EMLP-AL (27X18) CUS 0830517 1
EMLP-AL (49X15) CUS 0830519 1
EMLP-AL (60X15) CUS 0830520 1
EMLP-AL (60X30) CUS 0830521 1
EMLP-AL (85,6X54) CUS 0830522 1
EMLP-AL (100X60) CUS 0830523 1

Accessories Accessories

BLUEMARK MAG EM-M (27X15) 0802736 1

BLUEMARK MAG EM-M (27X18) 0802737 1

BLUEMARK MAG EM-M (49X15) 0802738 1

BLUEMARK MAG EM-M (60X15) 0802739 1

BLUEMARK MAG EM-M (60X30) 0802740 1

BLUEMARK MAG EM-M (85,6X54) 0802741 1

BLUEMARK MAG EM-M (100X60) 0802742 1

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 231

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Marking and labeling - MARKING system
Device marking
Aluminum device marking for screw- Can be printed with:
ing or riveting
P R I NT E D
F OR YOU

UV
UV LED technology

Unlabeled or labeled
according to customer specifications

Technical data
General data
Can be printed with: BLUEMARK CLED
– The aluminum EMSP-AL product range Material Aluminum
includes markers that can be quickly and Wipe resistance DIN EN 61010-1 (VDE 0411-1)

easily fitted with screws or rivets and is Ordering data

characterized by the following: Pcs. /
– High-quality appearance Description Color Type Order No.
Pkt.
– The markers can be labeled quickly, easily, Marking label, aluminum, 0.8 mm thick, with mounting holes
and cost-effectively with the 3.2 mm in diameter
Lettering field size: 39 x 15 mm aluminum EMSP-AL (39X15) 0830510 45
BLUEMARK CLED Lettering field size: 50 x 15 mm aluminum EMSP-AL (50X15) 0830773 45
– By using modern UV LED printing tech- Lettering field size: 50 x 30 mm aluminum EMSP-AL (50X30) 0830502 45
Lettering field size: 75.6 x 54 mm aluminum EMSP-AL (75,6X54) 0830503 15
nology, a highly resistant and optimum Lettering field size: 90 x 60 mm aluminum EMSP-AL (90X60) 0830504 15
printing quality can be achieved, which is Marking label, aluminum, 0.8 mm thick, with mounting holes
resistant to solvents and suitable for use 3.2 mm in diameter, labeled according to customer
specifications1)
even under harsh industrial conditions
– Labeling service: Phoenix Contact can Lettering field size: 39 x 15 mm aluminum EMSP-AL (39X15) CUS 0830518 1
Lettering field size: 50 x 15 mm aluminum EMSP-AL (50X15) CUS 0830775 1
custom-label EMSP ... markers according Lettering field size: 50 x 30 mm aluminum EMSP-AL (50X30) CUS 0830505 1
to your requirements Lettering field size: 75.6 x 54 mm aluminum EMSP-AL (75,6X54) CUS 0830506 1
Lettering field size: 90 x 60 mm aluminum EMSP-AL (90X60) CUS 0830507 1
– In conjunction with magazines, optimum
printing accuracy is guaranteed Accessories
Magazine, for BLUEMARK CLED
Notes: for accommodating EMP-AL (27X15), EMLP-AL (27X15) BLUEMARK MAG EM-M (27X15) 0802736 1
For corresponding rivets for fixing the EMSP-AL ..., see page 370.
for accommodating EMP-AL (27X18), EMLP-AL (27X18) BLUEMARK MAG EM-M (27X18) 0802737 1

For drilling diagrams, visit www.phoenixcontact.net/products. for accommodating EMP-AL (49X15), EMLP-AL (49X15), BLUEMARK MAG EM-M (49X15) 0802738 1
1) For ordering example, see page 359. EMSP-AL (39X15)
for accommodating EMP-AL (60X15), EMLP-AL (60X15), BLUEMARK MAG EM-M (60X15) 0802739 1
EMSP-AL (50X15)
for accommodating EMP-AL (60X30), EMLP-AL (60X30), BLUEMARK MAG EM-M (60X30) 0802740 1
EMSP-AL (50X30)
for accommodating EMP-AL (85,6X54), EMLP-AL (85,6X54), BLUEMARK MAG EM-M (85,6X54) 0802741 1
EMSP-AL (75,6X54)
for accommodating EMLP-AL (100X60), EMSP-AL (90X60) BLUEMARK MAG EM-M (100X60) 0802742 1

232 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Marking and labeling - MARKING system
Device marking
Aluminum device marking Can be printed with:
for snapping into marker carriers
P R I NT E D
F OR YOU

UV
UV LED technology

Unlabeled or labeled
according to customer specifications

Technical data
General data
Can be printed with: BLUEMARK CLED
– The aluminum EMP-AL  product range Material Aluminum
includes markers that can be quickly and Wipe resistance DIN EN 61010-1 (VDE 0411-1)

easily fitted into existing CARRIER-EMP Ordering data

 label frames and is characterized by the Pcs. /
following: Description Color Type Order No.
Pkt.
– The markers can be labeled quickly, easily, Marking label, aluminum, 0.8 mm thick, can be snapped into
and cost-effectively with the marker carriers
Lettering field size: 27 x 15 mm aluminum EMP-AL (27X15) 0830776 90
BLUEMARK CLED Lettering field size: 27 x 18 mm aluminum EMP-AL (27X18) 0830777 90
– By using modern UV LED printing tech- Lettering field size: 49 x 15 mm aluminum EMP-AL (49X15) 0830778 45
Lettering field size: 60 x 15 mm aluminum EMP-AL (60X15) 0830779 45
nology, a highly resistant and optimum Lettering field size: 60 x 30 mm aluminum EMP-AL (60X30) 0830796 45
printing quality can be achieved, which is Lettering field size: 85.6 x 54 mm aluminum EMP-AL (85,6X54) 0830797 15
resistant to solvents and suitable for use Marking label, aluminum, 0.8 mm thick, can be snapped into
marker carriers, labeled according to customer
even under harsh industrial conditions specifications1)
– In conjunction with magazines, optimum Lettering field size: 27 x 15 mm aluminum EMP-AL (27X15) CUS 0830798 1
Lettering field size: 27 x 18 mm aluminum EMP-AL (27X18) CUS 0830799 1
printing accuracy is guaranteed Lettering field size: 49 x 15 mm aluminum EMP-AL (49X15) CUS 0830800 1
– Labeling service: Phoenix Contact can Lettering field size: 60 x 15 mm aluminum EMP-AL (60X15) CUS 0830801 1
custom-label all EMLP ... markers Lettering field size: 60 x 30 mm aluminum EMP-AL (60X30) CUS 0830802 1
Lettering field size: 85.6 x 54 mm aluminum EMP-AL (85,6X54) CUS 0830803 1
according to your requirements
Accessories
Notes:
Magazine, for BLUEMARK CLED
1) For ordering example, see page 359. for accommodating EMP-AL (27X15), EMLP-AL (27X15) BLUEMARK MAG EM-M (27X15) 0802736 1

for accommodating EMP-AL (27X18), EMLP-AL (27X18) BLUEMARK MAG EM-M (27X18) 0802737 1

for accommodating EMP-AL (49X15), EMLP-AL (49X15), BLUEMARK MAG EM-M (49X15) 0802738 1

EMSP-AL (39X15)
for accommodating EMP-AL (60X15), EMLP-AL (60X15), BLUEMARK MAG EM-M (60X15) 0802739 1
EMSP-AL (50X15)
for accommodating EMP-AL (60X30), EMLP-AL (60X30), BLUEMARK MAG EM-M (60X30) 0802740 1
EMSP-AL (50X30)
for accommodating EMP-AL (85,6X54), EMLP-AL (85,6X54), BLUEMARK MAG EM-M (85,6X54) 0802741 1
EMSP-AL (75,6X54)
for accommodating EMLP-AL (100X60), EMSP-AL (90X60) BLUEMARK MAG EM-M (100X60) 0802742 1

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 233

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Marking and labeling - MARKING system
Device marking
UniCard stick-on device marking Can be printed with:

y
123
UV x
UV LED technology Plotter

Unlabeled

Technical data
General data
Can be printed with: BLUEMARK CLED  BLUEMARK LED  CMS-P1-PLOTTER
– The UC-EMLP ... UniCard labeling range Material PA
includes self-adhesive device markers Inflammability class according to UL 94 V2
Temperature range [°C] -40 ... 120
with good adhesive properties Wipe resistance DIN EN 61010-1 (VDE 0411-1)
– The markers, which are supplied in uni- Components free from silicone and halogen
form sheets, can be printed onto quickly Ordering data
and easily using the BLUEMARK CLED
Pcs. /
– The format automatically ensures printing Description Color Type Order No.
Pkt.
with a high level of positional accuracy UniCard, with self-adhesive plastic labels
– The large temperature range for applica-
10-section, lettering field size: 11 x 9 mm white UC-EMLP (11X9) 0819291 10
tion means that the labels can be used in yellow UC-EMLP (11X9) YE 0822602 10
control cabinets as well as in the field silver UC-EMLP (11X9) SR 0828094 10
– The sheets provide space for including 10-section, lettering field size: 15 x 5 mm white UC-EMLP (15X5) 0819301 10
yellow UC-EMLP (15X5) YE 0822615 10
function texts silver UC-EMLP (15X5) SR 0828095 10
10-section, lettering field size: 17 x 9 mm white UC-EMLP (17X9) 0819314 10
yellow UC-EMLP (17X9) YE 0822628 10
silver UC-EMLP (17X9) SR 0828096 10
10-section, lettering field size: 17 x 15 mm white UC-EMLP (17X15) 0827885 10
yellow UC-EMLP (17X15) YE 0827886 10
silver UC-EMLP (17X15) SR 0827887 10
10-section, lettering field size: 20 x 8 mm white UC-EMLP (20X8) 0819327 10
yellow UC-EMLP (20X8) YE 0822631 10
silver UC-EMLP (20X8) SR 0828097 10
6-section, lettering field size: 22 x 22 mm white UC-EMLP (22X22) 0825463 10
yellow UC-EMLP (22X22) YE 0825464 10
silver UC-EMLP (22X22) SR 0825465 10
8-section, lettering field size: 27 x 12.5 mm white UC-EMLP (27X12,5) 0825469 10
yellow UC-EMLP (27X12,5) YE 0825470 10
silver UC-EMLP (27X12,5) SR 0825471 10
8-section, lettering field size: 27 x 18 mm white UC-EMLP (27X18) 0825475 10
yellow UC-EMLP (27X18) YE 0825476 10
silver UC-EMLP (27X18) SR 0825477 10
6-section, lettering field size: 27 x 27 mm white UC-EMLP (27X27) 0825481 10
yellow UC-EMLP (27X27) YE 0825482 10
silver UC-EMLP (27X27) SR 0825483 10
4-section, lettering field size: 49 x 15 mm white UC-EMLP (49X15) 0827903 10
yellow UC-EMLP (49X15) YE 0827904 10
silver UC-EMLP (49X15) SR 0827905 10
4-section, lettering field size: 60 x 15 mm white UC-EMLP (60X15) 0819330 10
yellow UC-EMLP (60X15) YE 0822644 10
silver UC-EMLP (60X15) SR 0828088 10
3-section, lettering field size: 60 x 30 mm white UC-EMLP (60X30) 0819343 10
yellow UC-EMLP (60X30) YE 0822657 10
silver UC-EMLP (60X30) SR 0828091 10

Accessories
Magazine, for CMS-P1-PLOTTER
P1 UC-MAG 6 5146121 1

234 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Marking and labeling - MARKING system
Device marking
UniCard stick-on device marking
P R I NT E D
F OR YOU
– All UC-EMLP ... self-adhesive device
markers can also be supplied labeled
according to customer requirements
Notes:
1) For ordering example, see page 359.

Labeled according to customer specifications

Technical data
General data
Material PA
Inflammability class according to UL 94 V2
Temperature range [°C] -40 ... 120
Wipe resistance DIN EN 61010-1 (VDE 0411-1)
Components free from silicone and halogen

Ordering data

Pcs. /
Description Color Type Order No.
Pkt.
UniCard, with self-adhesive plastic labels,
labeled according to customer specifications1)

10-section, lettering field size: 11 x 9 mm white UC-EMLP (11X9) CUS 0824547 1
yellow UC-EMLP (11X9) YE CUS 0824548 1
silver UC-EMLP (11X9) SR CUS 0828098 1
10-section, lettering field size: 15 x 5 mm white UC-EMLP (15X5) CUS 0824550 1
yellow UC-EMLP (15X5) YE CUS 0824551 1
silver UC-EMLP (15X5) SR CUS 0828099 1
10-section, lettering field size: 17 x 9 mm white UC-EMLP (17X9) CUS 0824553 1
yellow UC-EMLP (17X9) YE CUS 0824554 1
silver UC-EMLP (17X9) SR CUS 0828100 1
10-section, lettering field size: 17 x 15 mm white UC-EMLP (17X15) CUS 0827941 1
silver UC-EMLP (17X15) SR CUS 0827942 1
yellow UC-EMLP (17X15) YE CUS 0827943 1
10-section, lettering field size: 20 x 8 mm white UC-EMLP (20X8) CUS 0824556 1
yellow UC-EMLP (20X8) YE CUS 0824557 1
silver UC-EMLP (20X8) SR CUS 0828101 1
6-section, lettering field size: 22 x 22 mm white UC-EMLP (22X22) CUS 0826985 1
yellow UC-EMLP (22X22) YE CUS 0826986 1
silver UC-EMLP (22X22) SR CUS 0826987 1
8-section, lettering field size: 27 x 12.5 mm white UC-EMLP (27X12,5) CUS 0826967 1
yellow UC-EMLP (27X12,5) YE CUS 0826968 1
silver UC-EMLP (27X12,5) SR CUS 0826969 1
8-section, lettering field size: 27 x 18 mm white UC-EMLP (27X18) CUS 0826970 1
yellow UC-EMLP (27X18) YE CUS 0826971 1
silver UC-EMLP (27X18) SR CUS 0826972 1
6-section, lettering field size: 27 x 27 mm white UC-EMLP (27X27) CUS 0826973 1
yellow UC-EMLP (27X27) YE CUS 0826974 1
silver UC-EMLP (27X27) SR CUS 0826975 1
4-section, lettering field size: 49 x 15 mm white UC-EMLP (49X15) CUS 0827947 1
silver UC-EMLP (49X15) SR CUS 0827948 1
yellow UC-EMLP (49X15) YE CUS 0827949 1
4-section, lettering field size: 60 x 15 mm white UC-EMLP (60X15) CUS 0824559 1
yellow UC-EMLP (60X15) YE CUS 0824560 1
silver UC-EMLP (60X15) SR CUS 0828090 1
3-section, lettering field size: 60 x 30 mm white UC-EMLP (60X30) CUS 0824562 1
yellow UC-EMLP (60X30) YE CUS 0824563 1
silver UC-EMLP (60X30) SR CUS 0828093 1

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 235

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Marking and labeling - MARKING system
Device marking
UniCard device marking Can be printed with:
for screwing or riveting
P R I NT E D
F OR YOU

y
123
UV x
UV LED technology Plotter

Unlabeled or labeled according to customer

specifications

Technical data
General data
Can be printed with: BLUEMARK CLED  BLUEMARK LED  CMS-P1-PLOTTER
– The UC-EMSP ... UniCard labeling range Material PA
includes markers that can be attached us- Inflammability class according to UL 94 V2
Temperature range [°C] -40 ... 120
ing screws or rivets Wipe resistance DIN EN 61010-1 (VDE 0411-1)
– The markers, which are supplied in uni- Components free from silicone and halogen
form sheets, can be printed onto quickly Ordering data
and easily using the BLUEMARK CLED
Pcs. /
– The format automatically ensures printing Description Color Type Order No.
Pkt.
with a high level of positional accuracy UniCard, plastic labels with mounting holes 3.2 mm in diameter
– The large temperature range for applica-
4-section, lettering field size: 50 x 15 mm white UC-EMSP (50X15) 0828706 10
tion means that the labels can be used in yellow UC-EMSP (50X15) YE 0828707 10
control cabinets as well as in the field silver UC-EMSP (50X15) SR 0828708 10
– The sheets provide space for including
3-section, lettering field size: 50 x 30 mm white UC-EMSP (50X30) 0828709 10
function texts yellow UC-EMSP (50X30) YE 0828710 10
– Labeling service: Phoenix Contact can silver UC-EMSP (50X30) SR 0828711 10
custom-label all UniCard markers in UniCard, plastic labels with mounting holes 3.2 mm in diameter,
labeled acc. to customer specifications1)
accordance with your requirements
4-section, lettering field size: 50 x 15 mm white UC-EMSP (50X15) CUS 0829103 1
Notes: yellow UC-EMSP (50X15) YE CUS 0829104 1
For corresponding rivets for fixing the UC-EMSP ..., see page 370. silver UC-EMSP (50X15) SR CUS 0829105 1

3-section, lettering field size: 50 x 30 mm white UC-EMSP (50X30) CUS 0829106 1
For drilling diagrams, visit www.phoenixcontact.net/products. yellow UC-EMSP (50X30) YE CUS 0829107 1
1) For ordering example, see page 359. silver UC-EMSP (50X30) SR CUS 0829108 1

Accessories
Magazine, for CMS-P1-PLOTTER
P1 UC-MAG 6 5146121 1

236 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Marking and labeling - MARKING system
Device marking
UniCard device marking that can be Can be printed with:
snapped into marker carriers
P R I NT E D
F OR YOU

y
123
UV x
UV LED technology Plotter

Unlabeled or labeled
according to customer specifications

Technical data
General data
Can be printed with: BLUEMARK CLED  BLUEMARK LED  CMS-P1-PLOTTER
– The UC-EMP ... UniCard labeling range Material PA
includes markers that can be fitted into Inflammability class according to UL 94 V2
Temperature range [°C] -40 ... 120
existing CARRIER-EMP ... label frames Wipe resistance DIN EN 61010-1 (VDE 0411-1)
– The markers, which are supplied in uni- Components free from silicone and halogen
form sheets, can be printed onto quickly Ordering data
and easily using the BLUEMARK CLED
Pcs. /
– The format automatically ensures printing Description Color Type Order No.
Pkt.
with a high level of positional accuracy UniCard, 1.2 mm thick
– The large temperature range for applica- 8-section, lettering field size: 17 x 15 mm white UC-EMP (17X15) 0825421 10
tion means that the labels can be used in yellow UC-EMP (17X15) YE 0825422 10
silver UC-EMP (17X15) SR 0825423 10
control cabinets as well as in the field
– The sheets provide space for including 8-section, lettering field size: 27 x 15 mm white UC-EMP (27X15) 0825439 10
yellow UC-EMP (27X15) YE 0825440 10
function texts silver UC-EMP (27X15) SR 0825441 10
– Labeling service: Phoenix Contact can
custom-label all UniCard markers in 4-section, lettering field size: 49 x 15 mm white UC-EMP (49X15) 0825457 10
yellow UC-EMP (49X15) YE 0825458 10
accordance with your requirements silver UC-EMP (49X15) SR 0825459 10

Notes:
4-section, lettering field size: 60 x 15 mm white UC-EMP (60X15) 0822259 10
For matching label frames, see page 296. yellow UC-EMP (60X15) YE 0825330 10
1) For ordering example, see page 359. silver UC-EMP (60X15) SR 0827647 10

3-section, lettering field size: 60 x 30 mm white UC-EMP (60X30) 0822275 10

yellow UC-EMP (60X30) YE 0825331 10
silver UC-EMP (60X30) SR 0827648 10
UniCard, 1.2 mm thick, labeled acc. to customer specifications1)
8-section, lettering field size: 17 x 15 mm white UC-EMP (17X15) CUS 0827626 1
yellow UC-EMP (17X15) YE CUS 0827638 1
silver UC-EMP (17X15) SR CUS 0827649 1

8-section, lettering field size: 27 x 15 mm white UC-EMP (27X15) CUS 0827633 1
yellow UC-EMP (27X15) YE CUS 0827642 1
silver UC-EMP (27X15) SR CUS 0827653 1

4-section, lettering field size: 49 x 15 mm white UC-EMP (49X15) CUS 0827636 1
yellow UC-EMP (49X15) YE CUS 0827645 1
silver UC-EMP (49X15) SR CUS 0827656 1

4-section, lettering field size: 60 x 15 mm white UC-EMP (60X15) CUS 0824569 1

yellow UC-EMP (60X15) YE CUS 0826685 1
silver UC-EMP (60X15) SR CUS 0827657 1

3-section, lettering field size: 60 x 30 mm white UC-EMP (60X30) CUS 0824571 1
yellow UC-EMP (60X30) YE CUS 0826687 1
silver UC-EMP (60X30) SR CUS 0827658 1

Accessories
Magazine, for CMS-P1-PLOTTER
P1 UC-MAG 6 5146121 1

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 237

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Marking and labeling - MARKING system
Device marking
UniCard device marking that can be Can be printed with:
snapped into marker carriers

y
123
UV x
UV LED technology Plotter

Unlabeled

Technical data
General data
Can be printed with: BLUEMARK CLED  BLUEMARK LED  CMS-P1-PLOTTER
– The UC-EMP ... UniCard labeling range Material PA
includes markers for all applications Inflammability class according to UL 94 V2
Temperature range [°C] -40 ... 120
– The markers, which are supplied in uni- Wipe resistance DIN EN 61010-1 (VDE 0411-1)
form sheets, can be printed onto quickly Components free from silicone and halogen
and easily using the BLUEMARK CLED Ordering data
– The format automatically ensures printing
Pcs. /
with a high level of positional accuracy Description Color Type Order No.
Pkt.
– The UC-EMP ... device markers are ideal UniCard, 1.2 mm thick
for fitting into existing CARRIER-EMP ... 10-section, lettering field size: 27 x 8 mm white UC-EMP (27X8) 0825427 10
label frames yellow UC-EMP (27X8) YE 0825428 10
silver UC-EMP (27X8) SR 0825429 10
– The large temperature range for applica- 8-section, lettering field size: 27 x 12.5 mm white UC-EMP (27X12,5) 0825433 10
tion means that the labels can be used in yellow UC-EMP (27X12,5) YE 0825434 10
silver UC-EMP (27X12,5) SR 0825435 10
control cabinets as well as in the field 8-section, lettering field size: 27 x 15 mm white UC-EMP (27X15) 0825439 10
– The sheets provide space for including yellow UC-EMP (27X15) YE 0825440 10
function texts silver UC-EMP (27X15) SR 0825441 10
8-section, lettering field size: 27 x 18 mm white UC-EMP (27X18) 0825445 10
Notes: yellow UC-EMP (27X18) YE 0825446 10
silver UC-EMP (27X18) SR 0825447 10
For matching label frames, see page 296.
6-section, lettering field size: 27 x 27 mm white UC-EMP (27X27) 0825451 10
yellow UC-EMP (27X27) YE 0825452 10
silver UC-EMP (27X27) SR 0825453 10

Accessories
Magazine, for CMS-P1-PLOTTER
P1 UC-MAG 6 5146121 1

238 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Marking and labeling - MARKING system
Device marking
UniCard device marking that can be
snapped into marker carriers
P R I NT E D
F OR YOU
– All UC-EMP ... device markers can also be
supplied labeled according to customer
requirements
Notes:
1) For ordering example, see page 359.

Labeled according to customer specifications

Technical data
General data
Material PA
Inflammability class according to UL 94 V2
Temperature range [°C] -40 ... 120
Wipe resistance DIN EN 61010-1 (VDE 0411-1)
Components free from silicone and halogen

Ordering data

Pcs. /
Description Color Type Order No.
Pkt.
UniCard, 1.2 mm thick, labeled acc. to customer specifications1)
10-section, lettering field size: 27 x 8 mm white UC-EMP (27X8) CUS 0827631 1
yellow UC-EMP (27X8) YE CUS 0827640 1
silver UC-EMP (27X8) SR CUS 0827651 1
8-section, lettering field size: 27 x 12.5 mm white UC-EMP (27X12,5) CUS 0827632 1
yellow UC-EMP (27X12,5) YE CUS 0827641 1
silver UC-EMP (27X12,5) SR CUS 0827652 1
8-section, lettering field size: 27 x 15 mm white UC-EMP (27X15) CUS 0827633 1
yellow UC-EMP (27X15) YE CUS 0827642 1
silver UC-EMP (27X15) SR CUS 0827653 1
8-section, lettering field size: 27 x 18 mm white UC-EMP (27X18) CUS 0827634 1
yellow UC-EMP (27X18) YE CUS 0827643 1
silver UC-EMP (27X18) SR CUS 0827654 1
6-section, lettering field size: 27 x 27 mm white UC-EMP (27X27) CUS 0827635 1
yellow UC-EMP (27X27) YE CUS 0827644 1
silver UC-EMP (27X27) SR CUS 0827655 1

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 239

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Marking and labeling - MARKING system
Device marking
UniCard snap-in device marking Can be printed with:

y
P R I NT E D
123
UV x F OR YOU

UV LED technology Plotter

Technical data
General data
Can be printed with: BLUEMARK CLED  BLUEMARK LED  CMS-P1-PLOTTER
– The UC-EM ... UniCard labeling range in- Number of individual labels 20
cludes markers for devices and swtichgear Material PA
Inflammability class according to UL 94 V2
from a wide variety of manufacturers Temperature range [°C] -40 ... 120
– An overview of the devices that support Wipe resistance DIN EN 61010-1 (VDE 0411-1)
Components free from silicone and halogen
labeling plus their manufacturers can be
found starting on page 304 Ordering data
– The markers, which are supplied in uni- Pcs. /
Description Color Type Order No.
form sheets, can be printed onto quickly Pkt.
and easily using the BLUEMARK CLED UniCard, for labeling devices from the following manufacturers:
Siemens
– The format automatically ensures printing Lettering field size: 10 x 7 mm white UC-EM (10X7) 0825487 10
with a high level of positional accuracy Lettering field size: 10 x 7 mm turquoise UC-EM (10X7) TQ 0825488 10
– The large temperature range for applica- UniCard, for labeling devices from the following manufacturers:
Bosch Rexroth, ifm-electronic, Lumberg, Pepperl & Fuchs,
tion means that the labels can be used in Siemens
control cabinets as well as in the field Lettering field size: 10 x 8 mm white
Lettering field size: 10 x 8 mm turquoise
– The sheets provide space for including UniCard, for labeling devices from the following manufacturers:
function texts ABB, Lumberg
Lettering field size: 17.5 x 7.5 mm white
– Labeling service: Phoenix Contact can UniCard, for labeling devices from the following manufacturers:
custom-label all UniCard markers in ABB, ifm-electronic, Moeller, Murr Elektronik
accordance with your requirements Lettering field size: 17.5 x 8 mm white
UniCard, for labeling devices from the following manufacturers:
Notes:
see previous products, labeled according to customer
1) For ordering example, see page 359. specifications1)
Lettering field size: 10 x 7 mm white UC-EM (10X7) CUS 0827623 1
turquoise UC-EM (10X7) TQ CUS 0827659 1
UniCard, for labeling devices from the following manufacturers:
see previous products, labeled according to customer
specifications1)
Lettering field size: 10 x 8 mm white
turquoise
UniCard, for labeling devices from the following manufacturers:
see previous products, labeled according to customer
specifications1)
Lettering field size: 17.5 x 7.5 mm white
UniCard, for labeling devices from the following manufacturers:
see previous products, labeled according to customer
specifications1)
Lettering field size: 17.5 x 8 mm white

Accessories
Magazine, for CMS-P1-PLOTTER
P1 UC-MAG 6 5146121 1

240 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Marking and labeling - MARKING system
Device marking

P R I NT E D P R I NT E D P R I NT E D
F OR YOU F OR YOU F OR YOU

Technical data Technical data Technical data

BLUEMARK CLED  BLUEMARK LED  CMS-P1-PLOTTER BLUEMARK CLED  BLUEMARK LED  CMS-P1-PLOTTER BLUEMARK CLED  BLUEMARK LED  CMS-P1-PLOTTER
20 20 20
PA PA PA
V2 V2 V2
-40 ... 120 -40 ... 120 -40 ... 120
DIN EN 61010-1 (VDE 0411-1) DIN EN 61010-1 (VDE 0411-1) DIN EN 61010-1 (VDE 0411-1)
free from silicone and halogen free from silicone and halogen free from silicone and halogen

Ordering data Ordering data Ordering data

Pcs. / Pcs. / Pcs. /

Type Order No. Type Order No. Type Order No.
Pkt. Pkt. Pkt.

UC-EM (10X8) 0825491 10

UC-EM (10X8) TQ 0825492 10

UC-EM (17,5X7,5) 0825495 10

UC-EM (17,5X8) 0823766 10

UC-EM (10X8) CUS 0827624 1

UC-EM (10X8) TQ CUS 0827660 1

UC-EM (17,5X7,5) CUS 0827625 1

UC-EM (17,5X8) CUS 0824567 1

Accessories Accessories Accessories

P1 UC-MAG 6 5146121 1 P1 UC-MAG 6 5146121 1 P1 UC-MAG 6 5146121 1

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 241

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Marking and labeling - MARKING system
Device marking
UniCard snap-in device marking Can be printed with:

y
P R I NT E D
123
UV x F OR YOU

UV LED technology Plotter

Technical data
General data
Can be printed with: BLUEMARK CLED  BLUEMARK LED  CMS-P1-PLOTTER
– The UC-EM ... UniCard labeling range Number of individual labels 20
includes markers for devices and Material PA
Inflammability class according to UL 94 V2
switchgear from a wide variety of Temperature range [°C] -40 ... 120
manufacturers Wipe resistance DIN EN 61010-1 (VDE 0411-1)
Components free from silicone and halogen
– An overview of the devices that support
labeling plus their manufacturers can be Ordering data
found starting on page 304 Pcs. /
Description Color Type Order No.
– The markers, which are supplied in uni- Pkt.
form sheets, can be printed onto quickly UniCard, for labeling devices from the following manufacturers:
Murr Elektronik, Phoenix Contact, Weidmüller
and easily using the BLUEMARK CLED
– The format automatically ensures printing Lettering field size: 17.5 x 9 mm white UC-EM (17,5X9) 0827490 10
with a high level of positional accuracy yellow UC-EM (17,5X9) YE 0827494 10
UniCard, for labeling devices from the following manufacturers:
– The large temperature range for applica- Schneider Electric, ifm-electronic
tion means that the labels can be used in
Lettering field size: 18 x 8 mm white
control cabinets as well as in the field UniCard, for labeling devices from the following manufacturers:
– The sheets provide space for including Lumberg, Weidmüller
Lettering field size: 19 x 9 mm white
function texts yellow
– Labeling service: Phoenix Contact can UniCard, for labeling devices from the following manufacturers:
Harting, ifm-electronic, Phoenix Contact, Siemens
custom-label all UniCard markers in
accordance with your requirements Lettering field size: 20 x 7 mm white
turquoise
Notes: UniCard, for labeling devices from the following manufacturers:
1) see previous products, labeled according to customer
For ordering example, see page 359.
specifications1)
Lettering field size: 17.5 x 9 mm white UC-EM (17,5X9) CUS 0828238 1
yellow UC-EM (17,5X9) YE CUS 0828239 1
UniCard, for labeling devices from the following manufacturers:
see previous products, labeled according to customer
specifications1)
Lettering field size: 18 x 8 mm white 1
UniCard, for labeling devices from the following manufacturers:
see previous products, labeled according to customer
specifications1)
Lettering field size: 19 x 9 mm white
yellow
UniCard, for labeling devices from the following manufacturers:
see previous products, labeled according to customer
specifications1)
Lettering field size: 20 x 7 mm white
turquoise

Accessories
Magazine, for CMS-P1-PLOTTER
P1 UC-MAG 6 5146121 1

242 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Marking and labeling - MARKING system
Device marking

P R I NT E D P R I NT E D P R I NT E D
F OR YOU F OR YOU F OR YOU

Technical data Technical data Technical data

BLUEMARK CLED  BLUEMARK LED  CMS-P1-PLOTTER BLUEMARK CLED  BLUEMARK LED  CMS-P1-PLOTTER BLUEMARK CLED  BLUEMARK LED  CMS-P1-PLOTTER
20 20 20
PA PA PA
V2 V2 V2
-40 ... 120 -40 ... 120 -40 ... 120
DIN EN 61010-1 (VDE 0411-1) DIN EN 61010-1 (VDE 0411-1) DIN EN 61010-1 (VDE 0411-1)
free from silicone and halogen free from silicone and halogen free from silicone and halogen

Ordering data Ordering data Ordering data

Pcs. / Pcs. / Pcs. /

Type Order No. Type Order No. Type Order No.
Pkt. Pkt. Pkt.

UC-EM (18X8) 0825497 10

UC-EM (19X9) 0827492 10

UC-EM (19X9) YE 0827496 10

UC-EM (20X7) 0825499 10

UC-EM (20X7) TQ 0825500 10

UC-EM (18X8) CUS 0827627

UC-EM (19X9) CUS 0828240 1

UC-EM (19X9) YE CUS 0828241 1

UC-EM (20X7) CUS 0827628 1

UC-EM (20X7) TQ CUS 0827661 1

Accessories Accessories Accessories

P1 UC-MAG 6 5146121 1 P1 UC-MAG 6 5146121 1 P1 UC-MAG 6 5146121 1

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 243

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Marking and labeling - MARKING system
Device marking
UniCard snap-in device marking Can be printed with:

y
P R I NT E D
123
UV x F OR YOU

UV LED technology Plotter

Technical data
General data
Can be printed with: BLUEMARK CLED  BLUEMARK LED  CMS-P1-PLOTTER
– The UC-EM ... UniCard labeling range Number of individual labels 20
includes markers for devices and Material PA
Inflammability class according to UL 94 V2
switchgear from a wide variety of manu- Temperature range [°C] -40 ... 120
facturers Wipe resistance DIN EN 61010-1 (VDE 0411-1)
Components free from silicone and halogen
– An overview of the devices that support
labeling plus their manufacturers can be Ordering data
found starting on page 304 Pcs. /
Description Color Type Order No.
– The markers, which are supplied in uni- Pkt.
form sheets, can be printed onto quickly UniCard, for labeling devices from the following manufacturers:
ABB, Conta Clip, Escha, Festo, ifm-electronik, Harting, Moeller,
and easily using the BLUEMARK CLED Phoenix Contact, Siemens
– The format automatically ensures printing
Lettering field size: 20 x 9 mm white UC-EM (20X9) 0825503 10
with a high level of positional accuracy Lettering field size: 20 x 9 mm yellow UC-EM (20X9) YE 0827637 10
– The large temperature range for applica- Lettering field size: 20 x 9 mm turquoise UC-EM (20X9) TQ 0825504 10
tion means that the labels can be used in UniCard, for labeling devices from the following manufacturers:
Schneider Electric, ifm-electronic, Murr Elektronik
control cabinets as well as in the field
– The sheets provide space for including Lettering field size: 21 x 8 mm white
UniCard, for labeling devices from the following manufacturers:
function texts see previous products, labeled according to customer
– Labeling service: Phoenix Contact can specifications1)
Lettering field size: 20 x 9 mm white UC-EM (20X9) CUS 0827629 1
custom-label all UniCard markers in Lettering field size: 20 x 9 mm yellow UC-EM (20X9) YE CUS 0827639 1
accordance with your requirements Lettering field size: 20 x 9 mm turquoise UC-EM (20X9) TQ CUS 0827662 1
UniCard, for labeling devices from the following manufacturers:
Notes: see previous products, labeled according to customer
1)
specifications1)
For ordering example, see page 359.
Lettering field size: 21 x 8 mm white

Accessories
Magazine, for CMS-P1-PLOTTER
P1 UC-MAG 5 5146118 1

244 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Marking and labeling - MARKING system
Device marking

P R I NT E D
F OR YOU

Technical data

BLUEMARK CLED  BLUEMARK LED  CMS-P1-PLOTTER

20
PA
V2
-40 ... 120
DIN EN 61010-1 (VDE 0411-1)
free from silicone and halogen

Ordering data

Pcs. /
Type Order No.
Pkt.

UC-EM (21X8) 0825507 10

UC-EM (21X8) CUS 0827630 1

Accessories

P1 UC-MAG 5 5146118 1

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 245

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Marking and labeling - MARKING system
Device marking
UniCard snap-in device marking Can be printed with:
for Axioline E series

P R I NT E D

1
2
1
2
F OR YOU
UV
Thermal transfer for sheets UV LED technology
and cards

Technical data
General data
Can be printed with: THERMOMARK CARD PLUS  THERMOMARK CARD 
– The markers, which are supplied in uni- BLUEMARK CLED  BLUEMARK LED
Number of individual labels 30
form sheets, can be labeled quickly and Material PC
easily using the BLUEMARK CLED and Inflammability class according to UL 94 V0
THERMOMARK CARD products Temperature range [°C] -40 ... 120
Wipe resistance DIN EN 61010-1 (VDE 0411-1)
– The format automatically ensures printing Components Free from silicone, halogen and cadmium
with a high level of positional accuracy
Ordering data
– The large temperature range for applica-
tion means that the labels can be used in Description Color Type Order No.
Pcs. /
Pkt.
control cabinets as well as in the field
UniCard, for labeling Phoenix Contact devices, Axioline
– The sheets provide space for including
function texts Lettering field size: 7 x 10 mm white UCT-EM (7X10) 0830765 10
– Labeling service: Phoenix Contact can UniCard, for labeling Phoenix Contact devices, Axioline,
labeled according to customer specifications1)
custom-label all UniCard markers in Lettering field size: 7 x 10 mm white UCT-EM (7X10) CUS 0830766 1
accordance with your requirements Accessories
Notes: Magazine, for THERMOMARK CARD ...,
1)
for accommodating UCT-WMT ... sheets, UCT-EM (17X10)
For ordering example, see page 359.
THERMOMARK CARD-UCT-MAG7 0801734 1

246 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Marking and labeling - MARKING system
Device marking
UniCard snap-in device marking for Can be printed with:
devices from other manufacturers

P R I NT E D

1
2
1
2
F OR YOU
UV
Thermal transfer for sheets UV LED technology
and cards

Technical data
General data
Can be printed with: THERMOMARK CARD PLUS  THERMOMARK CARD 
The UCT-EM ... UniCard labeling range BLUEMARK CLED  BLUEMARK LED
Number of individual labels 66
includes markers for devices and switchgear Material PC
from a wide range of manufacturers. Inflammability class according to UL 94 V0
– The markers, which are supplied in uni- Temperature range [°C] -40 ... 120
Wipe resistance DIN EN 61010-1 (VDE 0411-1)
form sheets, can be labeled quickly and Components free from silicone and halogen
easily using the BLUEMARK CLED and
Ordering data
THERMOMARK CARD products
– The format automatically ensures printing Description Color Type Order No.
Pcs. /
Pkt.
with a high level of positional accuracy
UniCard, for labeling devices from the following manufacturers:
– The large temperature range for applica- Conta Clip, Murr Elektronik
tion means that the labels can be used in Lettering field size: 5 x 10 mm white UCT-EM (5X10) 0801497 10
control cabinets as well as in the field UniCard, for labeling devices from the following manufacturers:
see previous products, labeled according to customer
– The sheets provide space for including specifications1)
function texts Lettering field size: 5 x 10 mm white UCT-EM (5X10) CUS 0801583 1

– An overview of the devices that support Accessories

labeling plus their manufacturers can be Magazine, for THERMOMARK CARD ...
found starting on page 304 for accommodating: UCT-TM ..., UCT1-TM ..., UCT5-TM ...,
UCT-EM (5X10), UCT-EM (6X10)
THERMOMARK CARD-UCT-MAG1 5146480 1

– Labeling service: Phoenix Contact can

custom-label all UniCard markers in
accordance with your requirements
Notes:
1) For ordering example, see page 359.

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 247

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Marking and labeling - MARKING system
Device marking
UniCard snap-in device marking for Can be printed with:
devices from other manufacturers

P R I NT E D

1
2
1
2
F OR YOU
UV
Thermal transfer for sheets UV LED technology
and cards

Technical data
General data
Can be printed with: THERMOMARK CARD PLUS  THERMOMARK CARD 
The UCT-EM ... UniCard labeling range BLUEMARK CLED  BLUEMARK LED
Number of individual labels 54
includes markers for devices and switchgear Material PC
from a wide range of manufacturers. Inflammability class according to UL 94 V0
– The markers, which are supplied in uni- Temperature range [°C] -40 ... 120
Wipe resistance DIN EN 61010-1 (VDE 0411-1)
form sheets, can be labeled quickly and Components free from silicone and halogen
easily using the BLUEMARK CLED and
Ordering data
THERMOMARK CARD products
– The format automatically ensures printing Description Color Type Order No.
Pcs. /
Pkt.
with a high level of positional accuracy
UniCard, for labeling devices from the following manufacturers:
– The large temperature range for applica- Conta Clip, Festo, Finder
tion means that the labels can be used in Lettering field size: 6 x 10 mm white UCT-EM (6X10) 0801493 10
control cabinets as well as in the field UniCard, for labeling devices from the following manufacturers:
Beckhoff, Escha, Lumberg, Murr Elektronik, Pepperl & Fuchs,
– The sheets provide space for including Turck
function texts Lettering field size: 10 x 5 mm white
UniCard, for labeling devices from the following manufacturers:
– An overview of the devices that support Siemens
labeling plus their manufacturers can be Lettering field size: 10 x 7 mm white
Lettering field size: 10 x 7 mm turquoise
found starting on page 304 UniCard, for labeling devices from the following manufacturers:
– Labeling service: Phoenix Contact can Bosch/Rexroth, ifm-electronic, Lumberg, Pepperl & Fuchs,
Siemens
custom-label all UniCard markers in Lettering field size: 10 x 8 mm white
accordance with your requirements Lettering field size: 10 x 8 mm turquoise
UniCard, for labeling devices from the following manufacturers:
Notes: see previous products,
1)
labeled according to customer specifications1)
For ordering example, see page 359.
Lettering field size: 6 x 10 mm white UCT-EM (6X10) CUS 0801579 1
UniCard, for labeling devices from the following manufacturers:
see previous products,
labeled according to customer specifications1)
Lettering field size: 10 x 5 mm white
UniCard, for labeling devices from the following manufacturers:
see previous products,
labeled according to customer specifications1)
Lettering field size: 10 x 7 mm white
Lettering field size: 10 x 7 mm turquoise
UniCard, for labeling devices from the following manufacturers:
see previous products,
labeled according to customer specifications1)
Lettering field size: 10 x 8 mm white
Lettering field size: 10 x 8 mm turquoise

Accessories
Magazine, for THERMOMARK CARD ...
for accommodating: UCT-TM ..., UCT1-TM ..., UCT5-TM ..., THERMOMARK CARD-UCT-MAG1 5146480 1
UCT-EM (5X10), UCT-EM (6X10)
Magazine, for THERMOMARK CARD ...
for accommodating UCT-EM (10X5)
Magazine, for THERMOMARK CARD ...
for accommodating UCT-EM (10X7)
Magazine, for THERMOMARK CARD ...
for accommodating UCT-EM (10X8), UCT-EM (12X7)

248 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Marking and labeling - MARKING system
Device marking

P R I NT E D P R I NT E D P R I NT E D
F OR YOU F OR YOU F OR YOU

Technical data Technical data Technical data

THERMOMARK CARD PLUS  THERMOMARK CARD  THERMOMARK CARD PLUS  THERMOMARK CARD  THERMOMARK CARD PLUS  THERMOMARK CARD 
BLUEMARK CLED  BLUEMARK LED BLUEMARK CLED  BLUEMARK LED BLUEMARK CLED  BLUEMARK LED
60 36 36
PC PC PC
V0 V0 V0
-40 ... 120 -40 ... 120 -40 ... 120
DIN EN 61010-1 (VDE 0411-1) DIN EN 61010-1 (VDE 0411-1) DIN EN 61010-1 (VDE 0411-1)
free from silicone and halogen free from silicone and halogen free from silicone and halogen

Ordering data Ordering data Ordering data

Pcs. / Pcs. / Pcs. /

Type Order No. Type Order No. Type Order No.
Pkt. Pkt. Pkt.

UCT-EM (10X5) 0801470 10

UCT-EM (10X7) 0801498 10

UCT-EM (10X7) TQ 0801499 10

UCT-EM (10X8) 0801485 10

UCT-EM (10X8) TQ 0801486 10

UCT-EM (10X5) CUS 0801554 1

UCT-EM (10X7) CUS 0801585 1

UCT-EM (10X7) TQ CUS 0801586 1

UCT-EM (10X8) CUS 0801570 1

UCT-EM (10X8) TQ CUS 0801572 1

Accessories Accessories Accessories

THERMOMARK CARD-UCT-MAG13 0830400 1

THERMOMARK CARD-UCT-MAG20 0830751 1

THERMOMARK CARD-UCT-MAG12 0830399 1

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 249

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Marking and labeling - MARKING system
Device marking
UniCard snap-in device marking for Can be printed with:
devices from other manufacturers

P R I NT E D

1
2
1
2
F OR YOU
UV
Thermal transfer for sheets UV LED technology
and cards

Technical data
General data
Can be printed with: THERMOMARK CARD PLUS  THERMOMARK CARD 
The UCT-EM ... UniCard labeling range BLUEMARK CLED  BLUEMARK LED
Number of individual labels 30
includes markers for devices and switchgear Material PC
from a wide range of manufacturers. Inflammability class according to UL 94 V0
– The markers, which are supplied in uni- Temperature range [°C] -40 ... 120
Wipe resistance DIN EN 61010-1 (VDE 0411-1)
form sheets, can be labeled quickly and Components free from silicone and halogen
easily using the BLUEMARK CLED and
Ordering data
THERMOMARK CARD products
– The format automatically ensures printing Description Color Type Order No.
Pcs. /
Pkt.
with a high level of positional accuracy
UniCard, for labeling devices from the following manufacturers:
– The large temperature range for applica- Bernecke + Rainer
tion means that the labels can be used in Lettering field size: 12 x 3.3 mm white UCT-EM (12X3,3) 0801502 10
control cabinets as well as in the field UniCard, for labeling devices from the following manufacturers:
Bernecke + Rainer
– The sheets provide space for including Lettering field size: 12 x 6 mm white
function texts UniCard, for labeling devices from the following manufacturers:
Beckhoff, Wago
– An overview of the devices that support Lettering field size: 12 x 7 mm white
labeling plus their manufacturers can be UniCard, for labeling devices from the following manufacturers:
Siemens
found starting on page 304 Lettering field size: 15 x 10 mm white
– Labeling service: Phoenix Contact can UniCard, for labeling devices from the following manufacturers:
see previous products,
custom-label all UniCard markers in labeled according to customer specifications1)
accordance with your requirements Lettering field size: 12 x 3.3 mm white UCT-EM (12X3,3) CUS 0801577 1
Lettering field size: 12 x 6 mm white
Notes: Lettering field size: 12 x 7 mm white
1) For ordering example, see page 359. Lettering field size: 15 x 10 mm white

Accessories
Magazine, for THERMOMARK CARD ...
for accommodating UCT-EM (12X3,3), UCT-EM (12X6) THERMOMARK CARD-UCT-MAG9 0801736 1

Magazine, for THERMOMARK CARD ...

for accommodating UCT-EM (12X3,3), UCT-EM (12X6)

Magazine, for THERMOMARK CARD ...

for accommodating UCT-EM (10X8), UCT-EM (12X7)

Magazine, for THERMOMARK CARD ...

for accommodating UCT-EM (17,5X8), UCT-EM (20X7),
UCT-EM (15X10)

250 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Marking and labeling - MARKING system
Device marking

P R I NT E D P R I NT E D P R I NT E D
F OR YOU F OR YOU F OR YOU

Technical data Technical data Technical data

THERMOMARK CARD PLUS  THERMOMARK CARD  THERMOMARK CARD PLUS  THERMOMARK CARD  THERMOMARK CARD PLUS  THERMOMARK CARD 
BLUEMARK CLED  BLUEMARK LED BLUEMARK CLED  BLUEMARK LED BLUEMARK CLED  BLUEMARK LED
30 30 16
PC PC PC
V0 V0 V0
-40 ... 120 -40 ... 120 -40 ... 120
DIN EN 61010-1 (VDE 0411-1) DIN EN 61010-1 (VDE 0411-1) DIN EN 61010-1 (VDE 0411-1)
free from silicone and halogen free from silicone and halogen free from silicone and halogen

Ordering data Ordering data Ordering data

Pcs. / Pcs. / Pcs. /

Type Order No. Type Order No. Type Order No.
Pkt. Pkt. Pkt.

UCT-EM (12X6) 0801503 10

UCT-EM (12X7) 0801501 10

UCT-EM (15X10) 0801504 10

UCT-EM (12X6) CUS 0801578 1

UCT-EM (12X7) CUS 0801587 1
UCT-EM (15X10) CUS 0801588 1

Accessories Accessories Accessories

THERMOMARK CARD-UCT-MAG9 0801736 1

THERMOMARK CARD-UCT-MAG12 0830399 1

THERMOMARK CARD-UCT-MAG8 0801735 1

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 251

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Marking and labeling - MARKING system
Device marking
UniCard snap-in device marking for Can be printed with:
devices from other manufacturers

P R I NT E D

1
2
1
2
F OR YOU
UV
Thermal transfer for sheets UV LED technology
and cards

Technical data
General data
Can be printed with: THERMOMARK CARD PLUS  THERMOMARK CARD 
The UCT-EM ... UniCard labeling range BLUEMARK CLED  BLUEMARK LED
Number of individual labels 24
includes markers for devices and switchgear Material PC
from a wide range of manufacturers. Inflammability class according to UL 94 V0
– The markers, which are supplied in uni- Temperature range [°C] -40 ... 120
Wipe resistance DIN EN 61010-1 (VDE 0411-1)
form sheets, can be labeled quickly and Components free from silicone and halogen
easily using the BLUEMARK CLED and
Ordering data
THERMOMARK CARD products
– The format automatically ensures printing Description Color Type Order No.
Pcs. /
Pkt.
with a high level of positional accuracy
UniCard, for labeling devices from the following manufacturers:
– The large temperature range for applica- ABB, Festo, Finder, Murr Elektronik, Wago
tion means that the labels can be used in
Lettering field size: 17 x 9 mm white UCT-EM (17X9) 0801475 10
control cabinets as well as in the field Lettering field size: 17 x 9 mm yellow UCT-EM (17X9) YE 0801476 10
– The sheets provide space for including UniCard, for labeling devices from the following manufacturers:
function texts Allen-Bradley, Festo
Lettering field size: 17 x 10 mm white
– An overview of the devices that support Lettering field size: 17 x 10 mm yellow
labeling plus their manufacturers can be UniCard, for labeling devices from the following manufacturers:
ABB, Lumberg
found starting on page 304 Lettering field size: 17.5 x 7.5 mm white
– Labeling service: Phoenix Contact can UniCard, for labeling devices from the following manufacturers:
ABB, Schneider Electric, ifm-electronic, Murr Elektronik
custom-label all UniCard markers in
accordance with your requirements Lettering field size: 17 x 8 mm white
Lettering field size: 17 x 9 mm white UCT-EM (17X9) CUS 0801559 1
Lettering field size: 17 x 9 mm yellow UCT-EM (17X9) YE CUS 0801560 1
Lettering field size: 17 x 10 mm white
Lettering field size: 17 x 10 mm yellow
Lettering field size: 17.5 x 7.5 mm white
Lettering field size: 17 x 8 mm white

Accessories
Magazine, for THERMOMARK CARD ...
for accommodating UCT-EM (17 x 9) THERMOMARK CARD-UCT-MAG16 0830403 1
Magazine, for THERMOMARK CARD ...
for accommodating UCT-EM (17X10) and (20X8)

Magazine, for THERMOMARK CARD ...

for accommodating UCT-EM (17,5X7,5)
Magazine, for THERMOMARK CARD ...
for accommodating UCT-EM (21X8) and UCT EM (17X8)

252 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Marking and labeling - MARKING system
Device marking

P R I NT E D P R I NT E D P R I NT E D
F OR YOU F OR YOU F OR YOU

Technical data Technical data Technical data

THERMOMARK CARD PLUS  THERMOMARK CARD  THERMOMARK CARD PLUS  THERMOMARK CARD  THERMOMARK CARD PLUS  THERMOMARK CARD 
BLUEMARK CLED  BLUEMARK LED BLUEMARK CLED  BLUEMARK LED BLUEMARK CLED  BLUEMARK LED
20 24 18
PC PC PC
V0 V0 V0
-40 ... 120 -40 ... 120 -40 ... 120
DIN EN 61010-1 (VDE 0411-1) DIN EN 61010-1 (VDE 0411-1) DIN EN 61010-1 (VDE 0411-1)
free from silicone and halogen free from silicone and halogen free from silicone, halogen and cadmium

Ordering data Ordering data Ordering data

Pcs. / Pcs. / Pcs. /

Type Order No. Type Order No. Type Order No.
Pkt. Pkt. Pkt.

UCT-EM (17X10) 0801483 10

UCT-EM (17X10) YE 0801484 10

UCT-EM (17,5X7,5) 0801482 10

UCT-EM (17X8) 0801842 10

UCT-EM (17X10) CUS 0801567 1

UCT-EM (17X10) YE CUS 0801569 1
UCT-EM (17,5X7,5) CUS 0801566 1
UCT-EM (17X8) CUS 1014400 1

Accessories Accessories Accessories

THERMOMARK CARD-UCT-MAG11 0801738 1

THERMOMARK CARD-UCT-MAG18 0830405 1

THERMOMARK CARD-UCT-MAG14 0830401 1

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 253

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Marking and labeling - MARKING system
Device marking
UniCard snap-in device marking for Can be printed with:
devices from other manufacturers

P R I NT E D

1
2
1
2
F OR YOU
UV
Thermal transfer for sheets UV LED technology
and cards

Technical data
General data
Can be printed with: THERMOMARK CARD PLUS  THERMOMARK CARD 
The UCT-EM ... UniCard labeling range BLUEMARK CLED  BLUEMARK LED
Number of individual labels 24
includes markers for devices and switchgear Material PC
from a wide range of manufacturers. Inflammability class according to UL 94 V0
– The markers, which are supplied in uni- Temperature range [°C] -40 ... 120
Wipe resistance DIN EN 61010-1 (VDE 0411-1)
form sheets, can be labeled quickly and Components free from silicone and halogen
easily using the BLUEMARK CLED and
Ordering data
THERMOMARK CARD products
– The format automatically ensures printing Description Color Type Order No.
Pcs. /
Pkt.
with a high level of positional accuracy
UniCard, for labeling devices from the following manufacturers:
– The large temperature range for applica- ABB, ifm-electronic, Moeller, Murr Elektronik
tion means that the labels can be used in
Lettering field size: 17.5 x 8 mm white UCT-EM (17,5X8) 0801496 10
control cabinets as well as in the field UniCard, for labeling devices from the following manufacturers:
– The sheets provide space for including Murr Elektronik, Phoenix Contact, Weidmüller
function texts Lettering field size: 17.5 x 9 mm white
– An overview of the devices that support Lettering field size: 17.5 x 9 mm yellow
labeling plus their manufacturers can be UniCard, for marking devices from the following manufacturers:
ABB, Schneider Electric, ifm-electronic, Murr Elektronik
found starting on page 304 Lettering field size: 18 x 8 mm white
– Labeling service: Phoenix Contact can UniCard, for labeling devices from the following manufacturers:
ifm-electronic, Phoenix Contact, Siemens
custom-label all UniCard markers in
accordance with your requirements Lettering field size: 20 x 7 mm white
Lettering field size: 20 x 7 mm turquoise
Notes: UniCard, for labeling devices from the following manufacturers:
1)
see previous products, labeled according to customer
For ordering example, see page 359. specifications1)
Lettering field size: 17.5 x 8 mm white UCT-EM (17,5X8) CUS 0801582 1
Lettering field size: 17.5 x 9 mm white
Lettering field size: 17.5 x 9 mm yellow
Lettering field size: 18 x 8 mm white
Lettering field size: 20 x 7 mm white
Lettering field size: 20 x 7 mm turquoise

Accessories
Magazine, for THERMOMARK CARD ...
for accommodating UCT-EM (17,5X8), UCT-EM (20X7), THERMOMARK CARD-UCT-MAG8 0801735 1
UCT-EM (15X10)
Magazine, for THERMOMARK CARD ...
for accommodating UCT-EM (17,5X9)
Magazine, for THERMOMARK CARD ...
for accommodating UCT-EM (18 x 8)

254 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Marking and labeling - MARKING system
Device marking

P R I NT E D P R I NT E D P R I NT E D
F OR YOU F OR YOU F OR YOU

Technical data Technical data Technical data

THERMOMARK CARD PLUS  THERMOMARK CARD  THERMOMARK CARD PLUS  THERMOMARK CARD  THERMOMARK CARD PLUS  THERMOMARK CARD 
BLUEMARK CLED  BLUEMARK LED BLUEMARK CLED  BLUEMARK LED BLUEMARK CLED  BLUEMARK LED
24 24 24
PC PC PC
V0 V0 V0
-40 ... 120 -40 ... 120 -40 ... 120
DIN EN 61010-1 (VDE 0411-1) DIN EN 61010-1 (VDE 0411-1) DIN EN 61010-1 (VDE 0411-1)
free from silicone and halogen free from silicone and halogen free from silicone and halogen

Ordering data Ordering data Ordering data

Pcs. / Pcs. / Pcs. /

Type Order No. Type Order No. Type Order No.
Pkt. Pkt. Pkt.

UCT-EM (17,5X9) 0801491 10

UCT-EM (17,5X9) YE 0801492 10

UCT-EM (18X8) 0801488 10

UCT-EM (20X7) 0801494 10

UCT-EM (20X7) TQ 0801495 10

UCT-EM (17,5X9) CUS 0801575 1

UCT-EM (17,5X9) YE CUS 0801576 1
UCT-EM (18X8) CUS 0801573 1
UCT-EM (20X7) CUS 0801580 1
UCT-EM (20X7) TQ CUS 0801581 1

Accessories Accessories Accessories

THERMOMARK CARD-UCT-MAG8 0801735 1

THERMOMARK CARD-UCT-MAG22 0830771 1

THERMOMARK CARD-UCT-MAG17 0830404 1

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 255

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Marking and labeling - MARKING system
Device marking
UniCard snap-in device marking for Can be printed with:
devices from other manufacturers

P R I NT E D

1
2
1
2
F OR YOU
UV
Thermal transfer for sheets UV LED technology
and cards

Technical data
General data
Can be printed with: THERMOMARK CARD PLUS  THERMOMARK CARD 
The UCT-EM ... UniCard labeling range BLUEMARK CLED  BLUEMARK LED
Number of individual labels 24
includes markers for devices and switchgear Material PC
from a wide range of manufacturers. Inflammability class according to UL 94 V0
– The markers, which are supplied in uni- Temperature range [°C] -40 ... 120
Wipe resistance DIN EN 61010-1 (VDE 0411-1)
form sheets, can be labeled quickly and Components free from silicone and halogen
easily using the BLUEMARK CLED and
Ordering data
THERMOMARK CARD products
– The format automatically ensures printing Description Color Type Order No.
Pcs. /
Pkt.
with a high level of positional accuracy
UniCard, for labeling devices from the following manufacturers:
– The large temperature range for applica- Escha, Murr Elektronik, Turck
tion means that the labels can be used in Lettering field size: 20 x 8 mm white UCT-EM (20X8) 0801477 10
control cabinets as well as in the field UniCard, for labeling devices from the following manufacturers:
ABB, Conta Clip, Escha, Festo, ifm-electronic, Lumberg, Moeller,
– The sheets provide space for including Murr Elektronik, Pepperl & Fuchs, Phoenix Contact, Siemens,
Turck, Weidmüller
function texts
– An overview of the devices that support Lettering field size: 20 x 9 mm white
labeling plus their manufacturers can be Lettering field size: 20 x 9 mm turquoise
Lettering field size: 20 x 9 mm yellow
found starting on page 304 UniCard, for marking devices from the following manufacturers:
– Labeling service: Phoenix Contact can ABB, Schneider Electric, ifm-electronic, Murr Elektronik

custom-label all UniCard markers in Lettering field size: 21 x 8 mm white

accordance with your requirements UniCard, for labeling devices from the following manufacturers:
see previous products,
Notes: labeled according to customer specifications1)
Lettering field size: 20 x 8 mm white UCT-EM (20X8) CUS 0801561 1
1) For ordering example, see page 359. Lettering field size: 20 x 9 mm white
Lettering field size: 20 x 9 mm turquoise
Lettering field size: 20 x 9 mm yellow
Lettering field size: 21 x 8 mm white

Accessories
Magazine, for THERMOMARK CARD ...
for accommodating UCT-EM (17X10) and (20X8) THERMOMARK CARD-UCT-MAG11 0801738 1

for accommodating UCT-EM (20 x 9)

Magazine, for THERMOMARK CARD ...
for accommodating UCT-EM (21X8) and UCT EM (17X8)

256 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Marking and labeling - MARKING system
Device marking

P R I NT E D P R I NT E D
F OR YOU F OR YOU

Technical data Technical data

THERMOMARK CARD PLUS  THERMOMARK CARD  THERMOMARK CARD PLUS  THERMOMARK CARD 
BLUEMARK CLED  BLUEMARK LED BLUEMARK CLED  BLUEMARK LED
24 18
PC PC
V0 V0
-40 ... 120 -40 ... 120
DIN EN 61010-1 (VDE 0411-1) DIN EN 61010-1 (VDE 0411-1)
free from silicone and halogen free from silicone and halogen

Ordering data Ordering data

Pcs. / Pcs. /
Type Order No. Type Order No.
Pkt. Pkt.

UCT-EM (20X9) 0801471 10

UCT-EM (20X9) TQ 0801473 10
UCT-EM (20X9) YE 0801472 10

UCT-EM (21X8) 0801489 10

UCT-EM (20X9) CUS 0801556 1

UCT-EM (20X9) TQ CUS 0801558 1
UCT-EM (20X9) YE CUS 0801557 1
UCT-EM (21X8) CUS 0801574 1

Accessories Accessories

THERMOMARK CARD-UCT-MAG15 0830402 1

THERMOMARK CARD-UCT-MAG14 0830401 1

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 257

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Marking and labeling - MARKING system
Device marking
UniSheet stick-on device marking Can be printed with:

1
2
1
2
Thermal transfer for sheets
and cards

Unlabeled

Technical data
General data
Can be printed with: THERMOMARK CARD PLUS  THERMOMARK CARD
– The US-EMLP ... UniSheet labeling range Material PVC
includes self-adhesive device markers Inflammability class according to UL 94 V0
Temperature range [°C] -30 ... 80
with good adhesive properties in different Wipe resistance DIN EN 61010-1 (VDE 0411-1)
sizes for: Components Silicone-free
– Device marking Ordering data
– Module marking
Pcs. /
– Switchgear marking Description Color Type Order No.
Pkt.
– The markers, which are supplied in uni- UniSheet, with self-adhesive plastic labels, 0.5 mm thick
form sheets, can be printed onto quickly,
88-section, lettering field size: 8.8 x 15 mm white US-EMLP (8,8X15) 0830303 10
easily, and cost-effectively using the yellow US-EMLP (8,8X15) YE 0830316 10
THERMOMARK CARD red US-EMLP (8,8X15) RD 0830318 10
– The perforated markers are easy to silver US-EMLP (8,8X15) SR 0830317 10
135-section, lettering field size: 11 x 9 mm white US-EMLP (11X9) 0828789 10
separate and can be easily fitted yellow US-EMLP (11X9) YE 0828871 10
– The sheets provide space for including silver US-EMLP (11X9) SR 0828872 10
function texts 189-section, lettering field size: 15 x 5 mm white US-EMLP (15X5) 0828790 10
yellow US-EMLP (15X5) YE 0828873 10
– For more label sizes, visit silver US-EMLP (15X5) SR 0828874 10
www.phoenixcontact.net/products 108-section, lettering field size: 17 x 7 mm white US-EMLP (17X7) 0828792 10
yellow US-EMLP (17X7) YE 0828877 10
silver US-EMLP (17X7) SR 0828878 10
54-section, lettering field size: 17 x 15 mm white US-EMLP (17X15) 0828793 10
Marking of power circuit breakers, for yellow US-EMLP (17X15) YE 0828879 10
example: silver US-EMLP (17X15) SR 0828880 10
– 8.8 x 15 mm for ABB, Schneider Electric 75-section, lettering field size: 20 x 9 mm white US-EMLP (20X9) 0828795 10
yellow US-EMLP (20X9) YE 0828883 10
– 17 x 15 mm for ABB, Hager, Legrand silver US-EMLP (20X9) SR 0828884 10
– 35 x 15 mm for ABB, Legrand, 24-section, lettering field size: 22 x 22 mm white US-EMLP (22X22) 0828796 10
Schneider Electric yellow US-EMLP (22X22) YE 0828885 10
silver US-EMLP (22X22) SR 0828886 10
– 52.5 x 15 mm for ABB, Legrand, 51-section, lettering field size: 27 x 8 mm white US-EMLP (27X8) 0828797 10
Schneider Electric yellow US-EMLP (27X8) YE 0828889 10
silver US-EMLP (27X8) SR 0828890 10
– 70 x 15 mm for Legrand, 30-section, lettering field size: 27 x 12.5 mm white US-EMLP (27X12,5) 0828798 10
Schneider Electric
yellow US-EMLP (27X12,5) YE 0828891 10
silver US-EMLP (27X12,5) SR 0828892 10
27-section, lettering field size: 27 x 15 mm white US-EMLP (27X15) 0828799 10
yellow US-EMLP (27X15) YE 0828893 10
silver US-EMLP (27X15) SR 0828894 10

Accessories
Magazine, for THERMOMARK CARD..., for accommodating all
US-... materials
THERMOMARK CARD-US-MAG1 5146451 1

258 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Marking and labeling - MARKING system
Device marking
UniSheet stick-on device marking

Unlabeled

Technical data
General data
Can be printed with: THERMOMARK CARD PLUS  THERMOMARK CARD
Material PVC
Inflammability class according to UL 94 V0
Temperature range [°C] -30 ... 80
Wipe resistance DIN EN 61010-1 (VDE 0411-1)
Components Silicone-free

Ordering data

Pcs. /
Description Color Type Order No.
Pkt.
UniSheet, with self-adhesive plastic labels, 0.5 mm thick

21-section, lettering field size: 27 x 18 mm white US-EMLP (27X18) 0828800 10

yellow US-EMLP (27X18) YE 0828895 10
silver US-EMLP (27X18) SR 0828896 10
15-section, lettering field size: 27 x 27 mm white US-EMLP (27X27) 0828801 10
yellow US-EMLP (27X27) YE 0828897 10
silver US-EMLP (27X27) SR 0828898 10
45-section, lettering field size: 35 x 9 mm white US-EMLP (35X9) 0828802 10
yellow US-EMLP (35X9) YE 0828899 10
silver US-EMLP (35X9) SR 0829430 10
27-section, lettering field size: 35 x 15 mm white US-EMLP (35X15) 0830300 10
yellow US-EMLP (35X15) YE 0830319 10
red US-EMLP (35X15) RD 0830321 10
silver US-EMLP (35X15) SR 0830320 10
28-section, lettering field size: 40 x 10 mm white US-EMLP (40X10) 0830341 10
yellow US-EMLP (40X10) YE 0830342 10
silver US-EMLP (40X10) SR 0830328 10
18-section, lettering field size: 49 x 15 mm white US-EMLP (49X15) 0828803 10
yellow US-EMLP (49X15) YE 0828901 10
silver US-EMLP (49X15) SR 0828902 10
16-section, lettering field size: 52.5 x 15 mm white US-EMLP (52,5X15) 0830301 10

yellow US-EMLP (52,5X15) YE 0830322 10

red US-EMLP (52,5X15) RD 0830324 10
silver US-EMLP (52,5X15) SR 0830323 10
9-section, lettering field size: 60 x 15 mm white US-EMLP (60X15) 0828804 10
yellow US-EMLP (60X15) YE 0828903 10
silver US-EMLP (60X15) SR 0828904 10
4-section, lettering field size: 60 x 30 mm white US-EMLP (60X30) 0828805 10
yellow US-EMLP (60X30) YE 0828905 10
silver US-EMLP (60X30) SR 0828906 10
8-section, lettering field size: 70 x 15 mm white US-EMLP (70X15) 0830302 10
yellow US-EMLP (70X15) YE 0830325 10
red US-EMLP (70X15) RD 0830327 10
silver US-EMLP (70X15) SR 0830326 10
2-section, lettering field size: 85.6 x 54 mm white US-EMLP (85,6X54) 0828806 10
yellow US-EMLP (85,6X54) YE 0828907 10
silver US-EMLP (85,6X54) SR 0828908 10
2-section, lettering field size: 100 x 60 mm white US-EMLP (100X60) 0828807 10
yellow US-EMLP (100X60) YE 0828909 10
silver US-EMLP (100X60) SR 0828910 10
1-section, lettering field size: 104 x 135 mm white US-EMLP (104X135) 0830304 10
yellow US-EMLP (104X135) YE 0830305 10
silver US-EMLP (104X135) SR 0830306 10

Accessories
Magazine, for THERMOMARK CARD..., for accommodating all
US-... materials
THERMOMARK CARD-US-MAG1 5146451 1

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 259

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Marking and labeling - MARKING system
Device marking
UniSheet stick-on device marking
P R I NT E D
F OR YOU

Labeled according to customer specifications

Technical data
General data
Material PVC
– The US-EMLP ... UniSheet labeling range Inflammability class according to UL 94 V0
includes self-adhesive device markers Temperature range [°C] -30 ... 80
Wipe resistance DIN EN 61010-1 (VDE 0411-1)
with good adhesive properties in different Components Silicone-free
sizes for: Ordering data
– Device marking
– Module marking Description Color Type Order No.
Pcs. /
Pkt.
– Switchgear marking
UniSheet, with self-adhesive plastic labels, 0.5 mm thick,
– The markers, which are supplied in uni- labeled acc. to customer specifications1)
form sheets, can be printed onto quickly, 88-section, lettering field size: 8.8 x 15 mm white US-EMLP (8,8X15) CUS 0830371 1
yellow US-EMLP (8,8X15) YE CUS 0830372 1
easily, and cost-effectively using the red US-EMLP (8,8X15) RD CUS 0830374 1
THERMOMARK CARD silver US-EMLP (8,8X15) SR CUS 0830373 1
– The perforated markers are easy to sepa- 135-section, lettering field size: 11 x 9 mm white US-EMLP (11X9) CUS 0830073 1
yellow US-EMLP (11X9) YE CUS 0830074 1
rate and can be easily fitted silver US-EMLP (11X9) SR CUS 0830075 1
– The sheets provide space for including 189-section, lettering field size: 15 x 5 mm white US-EMLP (15X5) CUS 0830076 1
function texts yellow US-EMLP (15X5) YE CUS 0830077 1
silver US-EMLP (15X5) SR CUS 0830078 1
– For more label sizes, visit 108-section, lettering field size: 17 x 7 mm white US-EMLP (17X7) CUS 0830079 1
www.phoenixcontact.net/products yellow US-EMLP (17X7) YE CUS 0830080 1
silver US-EMLP (17X7) SR CUS 0830081 1
54-section, lettering field size: 17 x 15 mm white US-EMLP (17X15) CUS 0830082 1
yellow US-EMLP (17X15) YE CUS 0830083 1
Marking of power circuit breakers, for silver US-EMLP (17X15) SR CUS 0830084 1
example: 75-section, lettering field size: 20 x 9 mm white US-EMLP (20X9) CUS 0830085 1
– 8.8 x 15 mm for ABB, Schneider Electric yellow US-EMLP (20X9) YE CUS 0830086 1
silver US-EMLP (20X9) SR CUS 0830087 1
– 17 x 15 mm for ABB, Hager, Legrand 24-section, lettering field size: 22 x 22 mm white US-EMLP (22X22) CUS 0830088 1
– 35 x 15 mm for ABB, Legrand, yellow US-EMLP (22X22) YE CUS 0830089 1
Schneider Electric silver US-EMLP (22X22) SR CUS 0830090 1
51-section, lettering field size: 27 x 8 mm white US-EMLP (27X8) CUS 0830091 1
– 52.5 x 15 mm for ABB, Legrand, yellow US-EMLP (27X8) YE CUS 0830092 1
Schneider Electric silver US-EMLP (27X8) SR CUS 0830093 1
30-section, lettering field size: 27 x 12.5 mm white US-EMLP (27X12,5) CUS 0830094 1
– 70 x 15 mm for Legrand,
Schneider Electric yellow US-EMLP (27X12,5) YE CUS 0830095 1
silver US-EMLP (27X12,5) SR CUS 0830096 1
Notes: 27-section, lettering field size: 27 x 15 mm white US-EMLP (27X15) CUS 0830097 1
1) For ordering example, see page 359. yellow US-EMLP (27X15) YE CUS 0830098 1
silver US-EMLP (27X15) SR CUS 0830099 1
21-section, lettering field size: 27 x 18 mm white US-EMLP (27X18) CUS 0830100 1
yellow US-EMLP (27X18) YE CUS 0830101 1
silver US-EMLP (27X18) SR CUS 0830102 1
15-section, lettering field size: 27 x 27 mm white US-EMLP (27X27) CUS 0830103 1
yellow US-EMLP (27X27) YE CUS 0830104 1
silver US-EMLP (27X27) SR CUS 0830105 1

260 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Marking and labeling - MARKING system
Device marking
UniSheet stick-on device marking
P R I NT E D
F OR YOU

Notes:
1) For ordering example, see page 359.

Labeled according to customer specifications

Technical data
General data
Material PVC
Inflammability class according to UL 94 V0
Temperature range [°C] -30 ... 80
Wipe resistance DIN EN 61010-1 (VDE 0411-1)
Components Silicone-free

Ordering data

Pcs. /
Description Color Type Order No.
Pkt.
UniSheet, with self-adhesive plastic labels, 0.5 mm thick,
labeled acc. to customer specifications1)
45-section, lettering field size: 35 x 9 mm white US-EMLP (35X9) CUS 0830106 1
yellow US-EMLP (35X9) YE CUS 0830107 1
silver US-EMLP (35X9) SR CUS 0830108 1
27-section, lettering field size: 35 x 15 mm white US-EMLP (35X15) CUS 0830375 1
yellow US-EMLP (35X15) YE CUS 0830376 1
red US-EMLP (35X15) RD CUS 0830378 1
silver US-EMLP (35X15) SR CUS 0830377 1
28-section, lettering field size: 40 x 10 mm white US-EMLP (40X10) CUS 0830365 1
yellow US-EMLP (40X10) YE CUS 0830366 1
silver US-EMLP (40X10) SR CUS 0830367 1
18-section, lettering field size: 49 x 15 mm white US-EMLP (49X15) CUS 0830109 1
yellow US-EMLP (49X15) YE CUS 0830110 1
silver US-EMLP (49X15) SR CUS 0830111 1
16-section, lettering field size: 52.5 x 15 mm white US-EMLP (52,5X15) CUS 0830379 1

yellow US-EMLP (52,5X15) YE CUS 0830380 1

red US-EMLP (52,5X15) RD CUS 0830382 1
silver US-EMLP (52,5X15) SR CUS 0830381 1
9-section, lettering field size: 60 x 15 mm white US-EMLP (60X15) CUS 0830112 1
yellow US-EMLP (60X15) YE CUS 0830113 1
silver US-EMLP (60X15) SR CUS 0830114 1
4-section, lettering field size: 60 x 30 mm white US-EMLP (60X30) CUS 0830115 1
yellow US-EMLP (60X30) YE CUS 0830116 1
silver US-EMLP (60X30) SR CUS 0830117 1
8-section, lettering field size: 70 x 15 mm white US-EMLP (70X15) CUS 0830383 1
yellow US-EMLP (70X15) YE CUS 0830384 1
red US-EMLP (70X15) RD CUS 0830386 1
silver US-EMLP (70X15) SR CUS 0830385 1
2-section, lettering field size: 85.6 x 54 mm white US-EMLP (85,6X54) CUS 0830118 1
yellow US-EMLP (85,6X54) YE CUS 0830119 1
silver US-EMLP (85,6X54) SR CUS 0830120 1
2-section, lettering field size: 100 x 60 mm white US-EMLP (100X60) CUS 0830121 1
yellow US-EMLP (100X60) YE CUS 0830122 1
silver US-EMLP (100X60) SR CUS 0830123 1
1-section, lettering field size: 104 x 135 mm white US-EMLP (104X135) CUS 0830387 1
yellow US-EMLP (104X135) YE CUS 0830388 1
silver US-EMLP (104X135) SR CUS 0830389 1

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 261

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Marking and labeling - MARKING system
Device marking
UniSheet device marking that can be Can be printed with:
snapped into marker carriers

1
2
1
2
Thermal transfer for sheets
and cards

Unlabeled

Technical data
General data
Can be printed with: THERMOMARK CARD PLUS  THERMOMARK CARD
– The US-EMP ... UniSheet labeling range Material PVC
includes markers that can be fitted into Inflammability class according to UL 94 V0
Temperature range [°C] -30 ... 80
existing CARRIER EMP ... label frames Wipe resistance DIN EN 61010-1 (VDE 0411-1)
– The markers, which are supplied in uni- Components Silicone-free
form sheets, can be printed onto quickly, Ordering data
easily, and cost-effectively using the
Pcs. /
THERMOMARK CARD Description Color Type Order No.
Pkt.
– The perforated markers are easy to UniSheet, just 0.5 mm thick1)
separate and can be easily fitted 54-section, lettering field size: 17 x 15 mm white US-EMP (17X15) 0828774 10
– The sheets provide space for including yellow US-EMP (17X15) YE 0828842 10
silver US-EMP (17X15) SR 0828843 10
function texts 70-section, lettering field size: 20 x 9 mm white US-EMP (20X9) 0829439 10
84-section, lettering field size: 25 x 6 mm white US-EMP (25X6)-1 0802754 10
Notes: 84-section, lettering field size: 26 x 6 mm white US-EMP (25X6) 0829435 10
For matching label frames, see page 296. 51-section, lettering field size: 27 x 8 mm white US-EMP (27X8) 0828775 10
1) yellow US-EMP (27X8) YE 0828844 10
For ordering example, see page 359.
silver US-EMP (27X8) SR 0828845 10
30-section, lettering field size: 27 x 12.5 mm white US-EMP (27X12,5) 0828776 10

yellow US-EMP (27X12,5) YE 0828846 10

silver US-EMP (27X12,5) SR 0828847 10
27-section, lettering field size: 27 x 15 mm white US-EMP (27X15) 0828777 10
yellow US-EMP (27X15) YE 0828848 10
silver US-EMP (27X15) SR 0828849 10
21-section, lettering field size: 27 x 18 mm white US-EMP (27X18) 0828778 10
yellow US-EMP (27X18) YE 0828850 10
silver US-EMP (27X18) SR 0828851 10
15-section, lettering field size: 27 x 27 mm white US-EMP (27X27) 0828779 10
yellow US-EMP (27X27) YE 0828852 10
silver US-EMP (27X27) SR 0828853 10
48-section, lettering field size: 29 x 8 mm white US-EMP (29X8) 0829436 10
yellow US-EMP (29X8) YE 0829440 10
16-section, lettering field size: 40 x 17 mm white US-EMP (40X17) 0829437 10
36-section, lettering field size: 44 x 7 mm white US-EMP (44X7) 0829438 10
18-section, lettering field size: 49 x 15 mm white US-EMP (49X15) 0828780 10
yellow US-EMP (49X15) YE 0828854 10
silver US-EMP (49X15) SR 0828855 10
9-section, lettering field size: 60 x 15 mm white US-EMP (60X15) 0828781 10
yellow US-EMP (60X15) YE 0828856 10
silver US-EMP (60X15) SR 0828857 10
4-section, lettering field size: 60 x 30 mm white US-EMP (60X30) 0828782 10
yellow US-EMP (60X30) YE 0828858 10
silver US-EMP (60X30) SR 0828859 10
2-section, lettering field size: 85.6 x 54 mm white US-EMP (85,6X54) 0828783 10
yellow US-EMP (85,6X54) YE 0828860 10
silver US-EMP (85,6X54) SR 0828861 10
9-section, lettering field size: 100 x 15 mm white US-EMP (100X15) 0829521 10
yellow US-EMP (100X15) YE 0829522 10
silver US-EMP (100X15) SR 0829523 10

Accessories
Magazine, for THERMOMARK CARD..., for accommodating all
US-... materials
THERMOMARK CARD-US-MAG1 5146451 1

262 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Marking and labeling - MARKING system
Device marking
UniSheet device marking that can be
snapped into marker carriers
P R I NT E D
F OR YOU
– All US-EMP ... device markers can also be
supplied labeled according to customer
requirements
Notes:
For matching label frames, see page 296.

Labeled according to customer specifications

Technical data
General data
Material PVC
Inflammability class according to UL 94 V0
Temperature range [°C] -30 ... 80
Wipe resistance DIN EN 61010-1 (VDE 0411-1)
Components Silicone-free

Ordering data

Pcs. /
Description Color Type Order No.
Pkt.
UniSheet, with self-adhesive plastic labels, 0.5 mm thick,
labeled acc. to customer specifications

54-section, lettering field size: 17 x 15 mm white US-EMP (17X15) CUS 0830025 1
yellow US-EMP (17X15) YE CUS 0830026 1
silver US-EMP (17X15) SR CUS 0830027 1
70-section, lettering field size: 20 x 9 mm white US-EMP (20X9) CUS 0830028 1
84-section, lettering field size: 25 x 6 mm white US-EMP (25X6)-1 CUS 0802755 1
84-section, lettering field size: 26 x 6 mm white US-EMP (25X6) CUS 0830029 1
51-section, lettering field size: 27 x 8 mm white US-EMP (27X8) CUS 0830030 1
yellow US-EMP (27X8) YE CUS 0830031 1
silver US-EMP (27X8) SR CUS 0830032 1
30-section, lettering field size: 27 x 12.5 mm white US-EMP (27X12,5) CUS 0830033 1

yellow US-EMP (27X12,5) YE CUS 0830034 1

silver US-EMP (27X12,5) SR CUS 0830035 1
27-section, lettering field size: 27 x 15 mm white US-EMP (27X15) CUS 0830036 1
yellow US-EMP (27X15) YE CUS 0830037 1
silver US-EMP (27X15) SR CUS 0830038 1
21-section, lettering field size: 27 x 18 mm white US-EMP (27X18) CUS 0830039 1
yellow US-EMP (27X18) YE CUS 0830040 1
silver US-EMP (27X18) SR CUS 0830041 1
15-section, lettering field size: 27 x 27 mm white US-EMP (27X27) CUS 0830042 1
yellow US-EMP (27X27) YE CUS 0830043 1
silver US-EMP (27X27) SR CUS 0830044 1
48-section, lettering field size: 29 x 8 mm white US-EMP (29X8) CUS 0830045 1
yellow US-EMP (29X8) YE CUS 0830046 1
16-section, lettering field size: 40 x 17 mm white US-EMP (40X17) CUS 0830047 1
36-section, lettering field size: 44 x 7 mm white US-EMP (44X7) CUS 0830048 1
18-section, lettering field size: 49 x 15 mm white US-EMP (49X15) CUS 0830049 1
yellow US-EMP (49X15) YE CUS 0830050 1
silver US-EMP (49X15) SR CUS 0830051 1
9-section, lettering field size: 60 x 15 mm white US-EMP (60X15) CUS 0830052 1
yellow US-EMP (60X15) YE CUS 0830053 1
silver US-EMP (60X15) SR CUS 0830054 1
4-section, lettering field size: 60 x 30 mm white US-EMP (60X30) CUS 0830055 1
yellow US-EMP (60X30) YE CUS 0830056 1
silver US-EMP (60X30) SR CUS 0830057 1
2-section, lettering field size: 85.6 x 54 mm white US-EMP (85,6X54) CUS 0830058 1
yellow US-EMP (85,6X54) YE CUS 0830059 1
silver US-EMP (85,6X54) SR CUS 0830060 1
9-section, lettering field size: 100 x 15 mm white US-EMP (100X15) CUS 0830061 1
yellow US-EMP (100X15) YE CUS 0830062 1
silver US-EMP (100X15) SR CUS 0830063 1

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 263

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Marking and labeling - MARKING system
Device marking
UniSheet device marking that can be Can be printed with:
snapped into marker carriers

1
2
1
2
Thermal transfer for sheets
and cards

Unlabeled

Technical data
General data
Can be printed with: THERMOMARK CARD PLUS  THERMOMARK CARD
The US-EMP ... UniSheet device markers Material PVC
can be easily and individually snapped into Inflammability class according to UL 94 V0
Temperature range [°C] -30 ... 80
the CARRIER(/L)-EMP (1000X15)... mark- Wipe resistance DIN EN 61010-1 (VDE 0411-1)
er profile. They offer the following advan- Components Silicone-free
tages and are suitable for the following: Ordering data
– Device marking
Pcs. /
– Module marking Description Color Type Order No.
Pkt.
– Switchgear marking UniSheet, 0.5 mm thick,
– The labels are available in different sizes can be labeled with THERMOMARK CARD
88-section, lettering field size: 8.8 x 15 mm white US-EMP (8,8X15) 0830293 10
corresponding to common device pitch yellow US-EMP (8,8X15) YE 0830426 10
measurements red US-EMP (8,8X15) RD 0830428 10
– The markers, which are supplied in uni- silver US-EMP (8,8X15) SR 0830427 10
54-section, lettering field size: 17 x 15 mm white US-EMP (17X15) 0828774 10
form sheets, can be printed onto quickly, yellow US-EMP (17X15) YE 0828842 10
easily, and cost-effectively using the silver US-EMP (17X15) SR 0828843 10
THERMOMARK CARD 27-section, lettering field size: 27 x 15 mm white US-EMP (27X15) 0828777 10
yellow US-EMP (27X15) YE 0828848 10
– The perforated markers are easy to silver US-EMP (27X15) SR 0828849 10
separate and can be easily fitted 24-section, lettering field size: 35 x 15 mm white US-EMP (35X15) 0830295 10
yellow US-EMP (35X15) YE 0830307 10
– The sheets provide space for including red US-EMP (35X15) RD 0830309 10
function texts silver US-EMP (35X15) SR 0830308 10
18-section, lettering field size: 49 x 15 mm white US-EMP (49X15) 0828780 10
yellow US-EMP (49X15) YE 0828854 10
Marking of power circuit breakers, silver US-EMP (49X15) SR 0828855 10
16-section, lettering field size: 52.5 x 15 mm white US-EMP (52,5X15) 0830296 10
for example:
– 8.8 x 15 mm for ABB, Schneider Electric yellow US-EMP (52,5X15) YE 0830310 10
red US-EMP (52,5X15) RD 0830312 10
– 17 x 15 mm for ABB, Hager, Legrand silver US-EMP (52,5X15) SR 0830311 10
– 35 x 15 mm for ABB, Legrand, 9-section, lettering field size: 60 x 15 mm white US-EMP (60X15) 0828781 10
Schneider Electric yellow US-EMP (60X15) YE 0828856 10
silver US-EMP (60X15) SR 0828857 10
– 52.5 x 15 mm for ABB, Legrand, 8-section, lettering field size: 70 x 15 mm white US-EMP (70X15) 0830297 10
Schneider Electric yellow US-EMP (70X15) YE 0830313 10
– 70 x 15 mm for Legrand, red US-EMP (70X15) RD 0830315 10
silver US-EMP (70X15) SR 0830314 10
Schneider Electric 9-section, lettering field size: 100 x 15 mm white US-EMP (100X15) 0829521 10
yellow US-EMP (100X15) YE 0829522 10
silver US-EMP (100X15) SR 0829523 10

Accessories
Profile, for screwing or riveting, 1000 mm long,
for accommodating UC-.../US-... and EMT ... material
with a height of 15 mm

gray CARRIER-EMP (1000X15) GY 0829366 25

transparent CARRIER-EMP (1000X15) TR 0829530 25
Profile, self-adhesive, 1000 mm long, for accommodating
UC-.../US-... and EMT ... material with a height of 15 mm

gray CARRIER/L-EMP (1000X15) GY 0829559 25

transparent CARRIER/L-EMP (1000X15) TR 0829560 25
CARRIER cover, 1000 mm long
transparent CARRIER-EMP (1000X15) COVER 0829520 25
Magazine, for THERMOMARK CARD...,
for accommodating all US-... materials
THERMOMARK CARD-US-MAG1 5146451 1

264 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Marking and labeling - MARKING system
Device marking
UniSheet device marking that can be
snapped into marker carriers
P R I NT E D P R I NT E D
F OR YOU F OR YOU
– All US-EMP ... device markers can also be
supplied labeled according to customer
requirements
Notes:
1) For ordering example, see page 359.

Labeled according to customer specifications Unlabeled or labeled according to customer

specifications

Technical data Technical data

General data
Can be printed with: - THERMOMARK ROLL  THERMOMARK ROLL X1  THERMO-
MARK X1.1  THERMOMARK X1.2  THERMOMARK S1.1
Material PVC Polyester
Inflammability class according to UL 94 V0 V0
Temperature range [°C] -30 ... 80 -40 ... 120
Wipe resistance DIN EN 61010-1 (VDE 0411-1) DIN EN 61010-1 (VDE 0411-1)
Components Silicone-free free from silicone and halogen

Ordering data Ordering data

Pcs. / Pcs. /
Description Color Type Order No. Type Order No.
Pkt. Pkt.
UniSheet, with self-adhesive plastic labels, 0.5 mm thick,
labeled acc. to customer specifications1)
88-section, lettering field size: 8.8 x 15 mm white US-EMP (8,8X15) CUS 0830349 1
yellow US-EMP (8,8X15) YE CUS 0830350 1
red US-EMP (8,8X15) RD CUS 0830352 1
silver US-EMP (8,8X15) SR CUS 0830351 1
54-section, lettering field size: 17 x 15 mm white US-EMP (17X15) CUS 0830025 1
yellow US-EMP (17X15) YE CUS 0830026 1
silver US-EMP (17X15) SR CUS 0830027 1
27-section, lettering field size: 27 x 15 mm white US-EMP (27X15) CUS 0830036 1
yellow US-EMP (27X15) YE CUS 0830037 1
silver US-EMP (27X15) SR CUS 0830038 1
24-section, lettering field size: 35 x 15 mm white US-EMP (35X15) CUS 0830353 1
yellow US-EMP (35X15) YE CUS 0830354 1
red US-EMP (35X15) RD CUS 0830356 1
silver US-EMP (35X15) SR CUS 0830355 1
18-section, lettering field size: 49 x 15 mm white US-EMP (49X15) CUS 0830049 1
yellow US-EMP (49X15) YE CUS 0830050 1
silver US-EMP (49X15) SR CUS 0830051 1
16-section, lettering field size: 52.5 x 15 mm white US-EMP (52,5X15) CUS 0830357 1

yellow US-EMP (52,5X15) YE CUS 0830358 1

red US-EMP (52,5X15) RD CUS 0830360 1
silver US-EMP (52,5X15) SR CUS 0830359 1
9-section, lettering field size: 60 x 15 mm white US-EMP (60X15) CUS 0830052 1
yellow US-EMP (60X15) YE CUS 0830053 1
silver US-EMP (60X15) SR CUS 0830054 1
8-section, lettering field size: 70 x 15 mm white US-EMP (70X15) CUS 0830361 1
yellow US-EMP (70X15) YE CUS 0830362 1
red US-EMP (70X15) RD CUS 0830364 1
silver US-EMP (70X15) SR CUS 0830363 1
9-section, lettering field size: 100 x 15 mm white US-EMP (100X15) CUS 0830061 1
yellow US-EMP (100X15) YE CUS 0830062 1
silver US-EMP (100X15) SR CUS 0830063 1
Insert strips, unprinted, 1 roll = 50 m, white EMT (EX15)R 0830671 1
continuous, strip height: 15 mm

Insert strips, unprinted, 1 roll = 50 m, white EMT (EX15)R CUS 0830395 1
continuous, strip height: 15 mm,
marked according to customer specifications

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 265

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Marking and labeling - MARKING system
Device marking
UniSheet device marking Can be printed with:
for screwing or riveting
P R I NT E D
F OR YOU

1
2
1
2
Thermal transfer for sheets
and cards

Unlabeled or labeled according to customer

specifications

Technical data
General data
Can be printed with: THERMOMARK CARD PLUS  THERMOMARK CARD
– The US-EMSP ... UniSheet labeling range Material PVC
includes markers that can be attached us- Inflammability class according to UL 94 V0
Temperature range [°C] -30 ... 80
ing screws or rivets Wipe resistance DIN EN 61010-1 (VDE 0411-1)
– The markers, which are supplied in uni- Components Silicone-free
form sheets, can be printed onto quickly, Ordering data
easily, and cost-effectively using the
Pcs. /
THERMOMARK CARD Description Color Type Order No.
Pkt.
– The perforated markers are easy to UniSheet, 0.5 mm thick, with mounting holes 3.2 mm in diameter
separate and can be easily fitted
4-section, lettering field size: 50 x 30 mm white US-EMSP (50X30) 0828786 10
– The sheets provide space for including yellow US-EMSP (50X30) YE 0828927 10
function texts silver US-EMSP (50X30) SR 0828928 10
– Labeling service: Phoenix Contact can 2-section, lettering field size: 75.6 x 54 mm white US-EMSP (75,6X54) 0828787 10
yellow US-EMSP (75,6X54) YE 0828929 10
custom-label all UniSheet markers in silver US-EMSP (75,6X54) SR 0828930 10
accordance with your requirements 2-section, lettering field size: 90 x 60 mm white US-EMSP (90X60) 0828788 10
yellow US-EMSP (90X60) YE 0828931 10
Notes: silver US-EMSP (90X60) SR 0828932 10
For corresponding rivets for fixing the US-EMSP ...., see page 370. UniSheet, 0.5 mm thick, with mounting holes white US-EMSP (50X30) CUS 0830064 1
3.2 mm in diameter,
labeled according to customer specifications,
1) For ordering example, see page 359. 4-section, lettering field size: 50 x 30 mm1)

yellow US-EMSP (50X30) YE CUS 0830065 1

yellow US-EMSP (50X30) SR CUS 0830066 1
2-section, lettering field size: 75.6 x 54 mm white US-EMSP (75,6X54) CUS 0830067 1
yellow US-EMSP (75,6X54) YE CUS 0830068 1
silver US-EMSP (75,6X54) SR CUS 0830069 1
2-section, lettering field size: 90 x 60 mm white US-EMSP (90X60) CUS 0830070 1
yellow US-EMSP (90X60) YE CUS 0830071 1
silver US-EMSP (90X60) SR CUS 0830072 1

Accessories
Magazine, for THERMOMARK CARD..., for accommodating all
US-... materials
THERMOMARK CARD-US-MAG1 5146451 1

266 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Marking and labeling - MARKING system
Device marking
UniSheet device marking for sticking Can be printed with:
on and additional screwing or riveting
P R I NT E D
F OR YOU

1
2
1
2
Thermal transfer for sheets
and cards

Unlabeled or labeled according to customer

specifications

Technical data
General data
Can be printed with: THERMOMARK CARD PLUS  THERMOMARK CARD
– The US-EMLSP ... UniSheet labeling Material PVC
range includes adhesive markers which Inflammability class according to UL 94 V0
Temperature range [°C] -30 ... 80
can also be attached with screws or rivets Wipe resistance DIN EN 61010-1 (VDE 0411-1)
– The markers, which are supplied in uni- Components Silicone-free
form sheets, can be printed onto quickly, Ordering data
easily, and cost-effectively using the
Pcs. /
THERMOMARK CARD Description Color Type Order No.
Pkt.
– The perforated markers are easy to UniSheet, with self-adhesive plastic labels, mounting holes
separate and can be easily fitted with 3.2 mm diameter, 0.5 mm thick
– The sheets provide space for including Lettering field size: 28 x 10 mm white US-EMLSP (28X10) 0830343 10
function texts yellow US-EMLSP (28X10) YE 0830344 10
– Labeling service: Phoenix Contact can silver US-EMLSP (28X10) SR 0830329 10
UniSheet, with self-adhesive plastic labels, white US-EMLSP (28X10) CUS 0830368 1
custom-label all UniSheet markers in mounting holes with 3.2 mm diameter, 0.5 mm
accordance with your requirements thick, labeled according to customer specifica-
tions, lettering field size: 28 x 10 mm1)
yellow US-EMLSP (28X10) YE CUS 0830369 1
Notes:
silver US-EMLSP (28X10) SR CUS 0830370 1
For corresponding rivets for fixing the UC-EMLSP ...,
see page 370. Accessories
For drilling diagrams, visit www.phoenixcontact.net/products. Magazine, for THERMOMARK CARD...,
for accommodating all US-... materials
1) For ordering example, see page 359. THERMOMARK CARD-US-MAG1 5146451 1

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 267

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Marking and labeling - MARKING system
Device marking
UniSheet device marking, Can be printed with:
stick-on labels

1
2
1
2
Thermal transfer for sheets
and cards

Technical data
General data
Can be printed with: THERMOMARK CARD PLUS  THERMOMARK CARD
– The US-EML ... UniSheet labeling ranges Material Polyester
include markers for marking equipment in Temperature range [°C] -40 ... 150
Wipe resistance DIN EN 61010-1 (VDE 0411-1)
switchgear and systems manufacturing Components free from silicone and halogen
– The markers, which are supplied in uni- Ordering data
form sheets, can be printed onto quickly,
easily, and cost-effectively using the Description Color Type Order No.
Pcs. /
Pkt.
THERMOMARK CARD
UniSheet, with self-adhesive labels
– The perforated markers and labels are 80-section, lettering field size: 17.5 x 8 mm white US-EML (17,5X8) 0800461 10
easy to separate and can be easily fitted yellow US-EML (17,5X8) YE 0800463 10
– When used in conjunction with 64-section, lettering field size: 20 x 8 mm white US-EML (20X8) 0800458 10
yellow US-EML (20X8) YE 0800460 10
high-quality ink ribbons, they result in a 34-section, lettering field size: 104 x 3.8 mm white US-EML (104X3,8) 0800464 10
highly resistant form of labeling that is
1-section, lettering field size: 104 x 140 mm white US-EML (104X140) 0800465 10
suitable for harsh environments yellow US-EML (104X140) YE 0800467 10
– The sheets provide space for including silver US-EML (104X140) SR 0800466 10
function texts Accessories
– The US-EML ... material is UL-listed Magazine, for THERMOMARK CARD...,
for accommodating all US-... materials
THERMOMARK CARD-US-MAG1 5146451 1

268 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Marking and labeling - MARKING system
Device marking
UniSheet - stick-on combi labels, Can be printed with:
unprinted
P R I NT E D
F OR YOU

1
2
1
2
Thermal transfer for sheets
and cards

Unlabeled or labeled according to customer

specifications

Technical data
General data
Can be printed with: THERMOMARK CARD PLUS  THERMOMARK CARD
The unlabeled US-EMLF ... combi labels Material PVC
on US ... cards allow you to create custom Temperature range [°C] -40 ... 90
Wipe resistance DIN EN 61010-1 (VDE 0411-1)
information signs. A variety of symbols Components Silicone-free
which conform to ISO 7010 are available in Ordering data
the CLIP PROJECT software. The markers
offer the following features: Description Color Type Order No.
Pcs. /
Pkt.
– High adhesive strength
UniSheet, with self-adhesive labels, 2-section,
– Suitable for indoor and outdoor use lettering field size: 104 x 70 mm
– The markers conform to the ISO 7010 white US-EMLF (104X70) 1014294 10
yellow US-EMLF (104X70) YE 1014295 10
international standard blue US-EMLF (104X70) BU 1014296 10
– The markers can be printed in various UniSheet, with self-adhesive labels, 1-section,
colors with the lettering field size: 104 x 140 mm
white US-EMLF (104X140) 1014291 10
THERMOMARK CARD PLUS yellow US-EMLF (104X140) YE 1014292 10
– When used in conjunction with blue US-EMLF (104X140) BU 1014293 10
UniSheet, with self-adhesive labels,
high-quality ink ribbons, a resistant form labeled according to customer specifications, 2-section,
of labeling is produced, which is even lettering field size: 104 x 70 mm1)
suitable for harsh environments white US-EMLF (104X70) CUS 1014300 1
– The markers, which are supplied in uni- yellow US-EMLF (104X70) YE CUS 1014301 1
form sheets, can be labeled quickly, easily, blue US-EMLF (104X70) BU CUS 1014302 1
UniSheet, with self-adhesive labels,
and cost-effectively using the labeled according to customer specifications, 1-section,
THERMOMARK CARD PLUS lettering field size: 104 x 140 mm1)

– The format automatically ensures printing white US-EMLF (104X140) CUS 1014297 1
with a high level of positional accuracy yellow US-EMLF (104X140) YE CUS 1014298 1
blue US-EMLF (104X140) BU CUS 1014299 1
– The perforated markers are easy
to separate Accessories
Magazine, for THERMOMARK CARD..., for accommodating all
Notes: US-... materials
1) For ordering example, see page 359. THERMOMARK CARD-US-MAG1 5146451 1
Segmented ink ribbon, length: 60 m, width: 110 mm
two segments in colors

black/red TM-RIBBON 110-TC BK/RD 1014403 1

three segments in colors black/red/ TM-RIBBON 110-TC BK/RD/YE 1014404 1
yellow
four segments in colors black/red/blue/ TM-RIBBON 110-TC BK/RD/BU/YE 1014405 1
yellow

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 269

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Marking and labeling - MARKING system
Device marking
Stick-on device marking Can be printed with:

2
1
1
2
Thermal transfer for rolls

Unlabeled, white

Technical data
General data
Can be printed with: THERMOMARK ROLL  THERMOMARK ROLL X1  THERMO-
– EML ... self-adhesive device markers have MARK X1.1  THERMOMARK X1.2  THERMOMARK S1.1
Material Polyester
been specially developed to allow the Temperature range [°C] -40 ... 150
marking of various types of operating Wipe resistance DIN EN 61010-1 (VDE 0411-1)
equipment in control, system, and control Components free from silicone and halogen

cabinet engineering applications Ordering data

– Precise printing quality and good adhesive
Pcs. /
properties Description Color Type Order No.
Pkt.
– If high-quality ink ribbons are used, the la- Labels
beling is resistant to solvents, making it 10,000 labels p. roll EML (10X4)R 0815583 1
10,000 labels p. roll EML (10X7)R 0816663 1
suitable for use even under harsh industri- 2500 labels p. roll
al conditions 2500 labels p. roll EML (15X9)R 0815677 1
– A wide range of marker sizes and colors 2500 labels p. roll EML (16,5X5)R 0816702 1
10,000 labels p. roll EML (16X7)R 0818001 1
is available for custom designs 2500 labels p. roll EML (17,5X8)R 0816744 1
– The special packaging protects rolls that 2500 labels p. roll EML (19X6)R 0816760 1
have already been started from the dirt 2500 labels p. roll
2500 labels p. roll EML (20X8)R 0816786 1
found in industrial environments 2500 labels p. roll
– The EML ... materials are UL-listed 2500 labels p. roll EML (25,4X12,7)R 0816825 1
2500 labels p. roll
– Designation example: 2500 labels p. roll
EML (10X4)R 2500 labels p. roll
Lettering field size: 10 x 4 mm 2500 labels p. roll
1000 labels p. roll
Type of packaging: roll 2500 labels p. roll EML (30X20)R 0816922 1
2500 labels p. roll EML (38X17)R 0816951 1
Notes:
1000 labels p. roll EML (40X8)R 0816980 1
The THERMOMARK ROLL-ERH external media hub is required 1000 labels p. roll
for RL rolls, see Printers on page 38. 1000 labels p. roll EML (40X25)R 0818027 1
For additional label sizes, see the product area on our website at 1000 labels p. roll EML (51X25)R 0817028 1
www.phoenixcontact.net/products. 1000 labels p. roll EML (70X32)R 0817060 1
400 labels p. roll EML (70X50)R 0817099 1
2500 labels p. roll EML (90X5)R 0817109 1
300 labels p. roll EML (100X40)R 0800286 1
300 labels p. roll EML (100X73)R 0817125 1
250 labels p. roll EML (100X90)R 0817154 1
Labels, on large roll
10,000 labels p. roll EML (16,5X5)RL 0816113 1
10,000 labels p. roll
10,000 labels p. roll EML (25,4X12,7)RL 0816087 1
10,000 labels p. roll EML (38,1X19)RL 0816171 1
3000 labels p. roll EML (50,8X25,4)RL 0816184 1
3000 labels p. roll EML (69,8X31,8)RL 0816197 1
2500 labels p. roll
1000 labels p. roll
Labels, round, 17.5 mm diameter
2500 labels p. roll EML (D17,5)R 0815774 1
Continuous labels, on large roll
Width: 37 mm, length: 90 m transparent EML (37XE)RL TR 0815716 1
Continuous labels, on large roll, length: 90 m

Width: 100 mm, length: 90 m

270 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Marking and labeling - MARKING system
Device marking

Unlabeled, yellow Unlabeled, silver

 

Technical data Technical data

THERMOMARK ROLL  THERMOMARK ROLL X1  THERMO- THERMOMARK ROLL  THERMOMARK ROLL X1  THERMO-
MARK X1.1  THERMOMARK X1.2  THERMOMARK S1.1 MARK X1.1  THERMOMARK X1.2  THERMOMARK S1.1
Polyester Polyester
-40 ... 150 -40 ... 150
DIN EN 61010-1 (VDE 0411-1) DIN EN 61010-1 (VDE 0411-1)
free from silicone and halogen free from silicone and halogen

Ordering data Ordering data

Pcs. / Pcs. /
Type Order No. Type Order No.
Pkt. Pkt.

EML (10X7)R YE 0816676 1

EML (15X6) R YE 0819288 1
EML (15X9)R YE 0816045 1 EML (15X9)R SR 0816032 1
EML (16,5X5)R YE 0816728 1
EML (16X7)R YE 0816731 1
EML (17,5X8)R YE 0816757 1

EML (20X7)R YE 0816773 1

EML (20X8)R YE 0816799 1
EML (21,5X21,5)R SR 0816812 1
EML (25,4X12,7)R YE 0816838 1
EML (26,5X7,5)R SR 0816841 1
EML (26,5X12)R SR 0816854 1
EML (26,5X17,5)R YE 0816896 1 EML (26,5X17,5)R SR 0816883 1
EML (26,5X18,5)R SR 0816906 1
EML (26,5X26,5)R SR 0816919 1
EML (30X20)R YE 0816935 1

EML (40X15)R SR 0815729 1

EML (40X25)R YE 0816977 1
EML (51X25)R YE 0817031 1 EML (51X25)R SR 0817002 1
EML (70X32)R YE 0817073 1 EML (70X32)R SR 0817057 1
EML (70X50)R SR 0817086 1

EML (100X40)R SR 0802697 1

EML (100X73)R YE 0817138 1 EML (100X73)R SR 0817112 1
EML (100X90)R SR 0817141 1

EML (16,5X5)RL YE 0816126 1

EML (17,5X8)RL YE 0816139 1
EML (18X7)RL YE 0802733 1

EML (76,2X6,5)RL YE 0816207 1

EML (101,6X25,4)RL SR 0815790 1

EML (100XE)RL SR 0815787 1

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 271

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Marking and labeling - MARKING system
Device marking
Stick-on device marking
P R I NT E D
F OR YOU

Labeled acc. to customer specifications, white

Technical data
General data
Material Polyester
– All EML ... labels can also be supplied Temperature range [°C] -40 ... 150
labeled according to customer require- Wipe resistance DIN EN 61010-1 (VDE 0411-1)
Components free from silicone and halogen
ments
– The EML ... materials are UL-listed Ordering data
– Designation example: Description Type Order No.
Pcs. /
EML (10X4)R Pkt.

Lettering field size: 10 x 4 mm Labels, labeled according to customer requirements1)

8 labels per strip EML (10X4)R CUS 0824289 1
Notes: 8 labels per strip EML (10X7)R CUS 0824290 1
8 labels per strip
For additional label sizes, visit www.phoenixcontact.net/products.
8 labels per strip EML (15X9)R CUS 0824294 1
5 labels per strip EML (16,5X5)R CUS 0824297 1
1) For ordering example, see page 359. 5 labels per strip EML (16X7)R CUS 0824301 1
5 labels per strip EML (17,5X8)R CUS 0824303 1
4 labels per strip EML (19X6)R CUS 0824306 1
4 labels per strip
4 labels per strip EML (20X8)R CUS 0824309 1
4 labels per strip
3 labels per strip EML (25,4X12,7)R CUS 0824313 1
3 labels per strip
3 labels per strip
3 labels per strip
3 labels per strip
3 labels per strip
3 labels per strip EML (30X20)R CUS 0824323 1
2 labels per strip EML (38X17)R CUS 0824328 1
2 labels per strip EML (40X8)R CUS 0824332 1
2 labels per strip
2 labels per strip EML (40X25)R CUS 0824330 1
2 labels per strip EML (51X25)R CUS 0824335 1
1 label per strip EML (70X32)R CUS 0824340 1
1 label per strip EML (70X50)R CUS 0824343 1
1 label per strip EML (90X5)R CUS 0824346 1
1 label per strip EML (100X40)R CUS 0802698 1
1 label per strip EML (100X73)R CUS 0824282 1
1 label per strip EML (100X90)R CUS 0824285 1
Labels, labeled according to customer requirements1)
2 labels per strip EML (38,1X19)RL CUS 0824327 1
1 label per strip EML (50,8X25,4)RL CUS 0824333 1
1 label per strip EML (69,8X31,8)RL CUS 0824339 1
4 labels per strip
1 label per strip
1 label per strip
Labels, round, 17.5 mm diameter,
labeled acc. to customer specifications1)

4 labels per strip EML (D17,5)R CUS 0824347 1

272 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Marking and labeling - MARKING system
Device marking

P R I NT E D P R I NT E D
F OR YOU F OR YOU

Labeled acc. to customer specifications, Labeled acc. to customer specifications, silver

yellow

 

Technical data Technical data

Polyester Polyester
-40 ... 150 -40 ... 150
DIN EN 61010-1 (VDE 0411-1) DIN EN 61010-1 (VDE 0411-1)
free from silicone and halogen free from silicone and halogen

Ordering data Ordering data

Pcs. / Pcs. /
Type Order No. Type Order No.
Pkt. Pkt.

EML (10X7)R YE CUS 0824291 1

EML (15X6) R YE CUS 0824348 1
EML (15X9)R YE CUS 0824296 1 EML (15X9)R SR CUS 0824295 1
EML (16,5X5)R YE CUS 0824298 1
EML (16X7)R YE CUS 0824302 1
EML (17,5X8)R YE CUS 0824304 1

EML (20X7)R YE CUS 0824308 1

EML (20X8)R YE CUS 0824310 1
EML (21,5X21,5)R SR CUS 0824312 1
EML (25,4X12,7)R YE CUS 0824314 1
EML (26,5X7,5)R SR CUS 0824322 1
EML (26,5X12)R SR CUS 0824315 1
EML (26,5X17,5)R YE CUS 0824319 1 EML (26,5X17,5)R SR CUS 0824318 1
EML (26,5X18,5)R SR CUS 0824320 1
EML (26,5X26,5)R SR CUS 0824321 1
EML (30X20)R YE CUS 0824324 1

EML (40X15)R SR CUS 0824329 1

EML (40X25)R YE CUS 0824331 1
EML (51X25)R YE CUS 0824337 1 EML (51X25)R SR CUS 0824336 1
EML (70X32)R YE CUS 0824342 1 EML (70X32)R SR CUS 0824341 1
EML (70X50)R SR CUS 0824344 1

EML (100X40)R SR CUS 0828993 1

EML (100X73)R YE CUS 0824284 1 EML (100X73)R SR CUS 0824283 1
EML (100X90)R SR CUS 0824286 1

EML (18X7)RL YE CUS 0802734 1

EML (76,2X6,5)RL YE CUS 0824345 1
EML (101,6X25,4)RL SR CUS 0824288 1

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 273

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Marking and labeling - MARKING system
Device marking
Stick-on device marking Can be printed with:
P R I NT E D
F OR YOU

2
1
1
2
Thermal transfer for rolls

Unlabeled or labeled according to customer

specifications

Technical data
General data
Can be printed with: THERMOMARK ROLL  THERMOMARK ROLL X1  THERMO-
– The EMLP ... self-adhesive markers meet MARK X1.1  THERMOMARK X1.2  THERMOMARK S1.1
Material Polyester
the same standards as the engraved labels Temperature range [°C] -40 ... 120
– Quick and cost-effective labeling with Wipe resistance DIN EN 61010-1 (VDE 0411-1)
THERMOMARK ... printers Components free from silicone and halogen

– High-quality appearance Ordering data

– High level of resistance to chemical and
Pcs. /
mechanical effects Description Color Type Order No.
Pkt.
– Primarily used for marking electrical com- Markers
ponents, devices, and buttons 500 markers p. roll white EMLP (13X9)R 0819453 1
500 markers p. roll white EMLP (17X7)R 0826844 1
– Designation example: 500 markers p. roll white EMLP (17,5X12)R 0819466 1
EMLP(13x9)R 3000 markers p. roll white EMLP (17,5X15)R 0802684 1
Lettering field size: 13 x 9 mm 500 markers p. roll white EMLP (20X7)R 0819479 1
500 markers p. roll white EMLP (20X8)R 0819482 1
Type of packaging: roll 500 markers p. roll white EMLP (22X12)R 0819495 1
– Labeling service: Phoenix Contact can 500 markers p. roll white EMLP (45X15)R 0801820 1
custom-label all EMLP ... markers in 500 markers p. roll white EMLP (45X25)R 0802727 1
250 markers p. roll white EMLP (60X30)R 0819505 1
accordance with your requirements 500 markers p. roll white EMLP (65X25)R 0802728 1

Notes: 3000 markers p. roll silver EMLP (17,5X15)R SR 0802685 1

1) For ordering example, see page 359. 500 markers p. roll silver EMLP (27X8)R SR 0819518 1
500 markers p. roll silver EMLP (27X12,5)R SR 0819521 1
500 markers p. roll silver EMLP (27X18)R SR 0819534 1
500 markers p. roll silver EMLP (22X22)R SR 0825528 1
500 markers p. roll silver EMLP (27X27)R SR 0827467 1
500 markers p. roll silver EMLP (45X15)R SR 0819547 1
250 markers p. roll silver EMLP (60X30)R SR 0801729 1
Markers, labeled acc. to customer specifications1)
4 markers per strip white EMLP (13X9)R CUS 0824354 1
2 markers per strip white EMLP (17X7)R CUS 0827083 1
2 markers per strip white EMLP (17,5X12)R CUS 0824355 1
6 markers per strip white EMLP (17,5X15)R CUS 0802690 1
2 markers per strip white EMLP (20X7)R CUS 0824356 1
2 markers per strip white EMLP (20X8)R CUS 0824357 1
2 markers per strip white EMLP (22X12)R CUS 0824358 1
1 marker per strip white EMLP (45X15)R CUS 0828990 1
1 marker per strip white EMLP (45X25)R CUS 0802730 1
1 marker per strip white EMLP (60X30)R CUS 0824363 1
1 marker per strip white EMLP (65X25)R CUS 0802731 1

6 markers per strip silver EMLP (17,5X15)R SR CUS 0802691 1

2 markers per strip silver EMLP (22X22)R SR CUS 0827475 1
2 markers per strip silver EMLP (27X8)R SR CUS 0824361 1
2 markers per strip silver EMLP (27X12,5)R SR CUS 0824359 1
2 markers per strip silver EMLP (27X18)R SR CUS 0824360 1
2 markers per strip silver EMLP (27X27)R SR CUS 0827469 1
2 markers per strip silver EMLP (45X15)R SR CUS 0824362 1
1 marker per strip silver EMLP (60X30)R SR CUS 0830398 1

274 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Marking and labeling - MARKING system
Device marking
Stick-on device marking, continuous Can be printed with:
P R I NT E D
F OR YOU

2
1
1
2
Thermal transfer for rolls

Unlabeled or labeled according to customer

specifications

Technical data
General data
Can be printed with: THERMOMARK ROLL  THERMOMARK ROLL X1  THERMO-
– The EMLP Ex... self-adhesive continuous MARK X1.1  THERMOMARK X1.2  THERMOMARK S1.1
Material Polyester
markers are equivalent to engraved labels Temperature range [°C] -40 ... 120
– Quick and cost-effective labeling with Wipe resistance DIN EN 61010-1 (VDE 0411-1)
THERMOMARK ... printers Components free from silicone and halogen

– High-quality appearance Ordering data

– High level of resistance to chemical and
Pcs. /
mechanical effects Description Color Type Order No.
Pkt.
– Primarily used for marking electrical com- Continuous roll
ponents, devices, and buttons Width: 15 mm, length: 40 m white EMLP (EX15)R 0802686 1
Width: 30 mm, length: 40 m white EMLP (EX30)R 0802688 1
– Designation example:
EMLP(13x9)R Width: 15 mm, length: 40 m silver EMLP (EX15)R SR 0802687 1
Lettering field size: 13 x 9 mm Width: 30 mm, length: 40 m silver EMLP (EX30)R SR 0802689 1
Continuous roll, labeled according to customer specifications1)
Type of packaging: roll Width: 15 mm, length: 40 m white EMLP (EX15)R CUS 0802692 1
– Labeling service: Phoenix Contact can Width: 30 mm, length: 40 m white EMLP (EX30)R CUS 0802695 1
custom-label all EMLP ... markers in
Width: 15 mm, length: 40 m silver EMLP (EX15)R SR CUS 0802694 1
accordance with your requirements Width: 30 mm, length: 40 m silver EMLP (EX30)R SR CUS 0802696 1

Notes:
1) For ordering example, see page 359.

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 275

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Marking and labeling - MARKING system
Device marking
Stick-on device marking, Can be printed with:
for 24 mm buttons
P R I NT E D
F OR YOU

2
1
1
2
Thermal transfer for rolls

Unlabeled or labeled according to customer

specifications

Technical data
General data
Can be printed with: THERMOMARK ROLL  THERMOMARK ROLL X1  THERMO-
– The EMLP 24 ... self-adhesive markers are MARK X1.1  THERMOMARK X1.2  THERMOMARK S1.1
Material Polyester
ideal for marking electrical buttons Temperature range [°C] -40 ... 120
– Quick and cost-effective labeling with Wipe resistance DIN EN 61010-1 (VDE 0411-1)
THERMOMARK ... printers Components free from silicone and halogen

– High-quality appearance Ordering data

– High level of resistance to chemical and
Pcs. /
mechanical effects Description Color Type Order No.
Pkt.
– Labeling service: Phoenix Contact can Markers for 24 mm buttons,
custom-label all EMLP ... markers in can be labeled with thermal transfer printer
500 markers p. roll white EMLP 24 (30X12)R 0819550 1
accordance with your requirements 500 markers p. roll silver EMLP 24 (30X12)R SR 0819563 1
500 markers p. roll red EMLP 24 (30X12)R RD 0819576 1
Notes:
500 markers p. roll green EMLP 24 (30X12)R GN 0819589 1
1) For ordering example, see page 359. Markers for 24 mm buttons, labeled acc. to customer
specifications1)
2 markers per strip white EMLP 24 (30X12)R CUS 0824367 1
2 markers per strip silver EMLP 24 (30X12)R SR CUS 0824370 1
2 markers per strip green EMLP 24 (30X12)R GN CUS 0824368 1
2 markers per strip red EMLP 24 (30X12)R RD CUS 0824369 1

276 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Marking and labeling - MARKING system
Device marking
Stick-on device marking, for 30 mm Can be printed with:
buttons
P R I NT E D
F OR YOU

2
1
1
2
Thermal transfer for rolls

Unlabeled or labeled according to customer

specifications

Technical data
General data
Can be printed with: THERMOMARK ROLL  THERMOMARK ROLL X1  THERMO-
– The EMLP 30 ... self-adhesive markers are MARK X1.1  THERMOMARK X1.2  THERMOMARK S1.1
Material Polyester
ideal for marking electrical buttons Temperature range [°C] -40 ... 120
– Quick and cost-effective labeling with Wipe resistance DIN EN 61010-1 (VDE 0411-1)
THERMOMARK ... printers Components free from silicone and halogen

– High-quality appearance Ordering data

– High level of resistance to chemical and
Pcs. /
mechanical effects Description Color Type Order No.
Pkt.
– Labeling service: Phoenix Contact can Markers for 30 mm buttons,
custom-label all EMLP ... markers in can be labeled with thermal transfer printers
500 markers p. roll white EMLP 30(45X10)R 0801855 1
accordance with your requirements 500 markers p. roll yellow EMLP 30(45X10)R YE 0801857 1
500 markers p. roll black EMLP 30(45X10)R BK 0801858 1
Notes:
If using THERMOMARK ROLL, 1 marker per strip white EMLP 30(45X10)R CUS 0802007 1
use the external ROLL-ERH media hub. 1 marker per strip yellow EMLP 30(45X10)R YE CUS 0802008 1
1 marker per strip yellow EMLP 30(45X10)R BK CUS 0802009 1

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 277

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Marking and labeling - MARKING system
Device marking
Highly flexible PVC stick-on Can be printed with:
device marking
P R I NT E D
F OR YOU

2
1
1
2
Thermal transfer for rolls

Unlabeled or labeled according to customer

specifications

Technical data
General data
Can be printed with: THERMOMARK ROLL  THERMOMARK ROLL X1  THERMO-
– Highly flexible, soft PVC label that adapts MARK X1.1  THERMOMARK X1.2  THERMOMARK S1.1
Material PVC
well to uneven surfaces Temperature range [°C] -40 ... 90
– Extremely high-quality appearance Wipe resistance DIN EN 61010-1 (VDE 0411-1)
– Outdoor-durable for up to eight years Ordering data
when subject to a temperature range
of -50°C to  90°C Description Color Type Order No.
Pcs. /
Pkt.
– Labeling service: Phoenix Contact can
Continuous label, width: 108 mm, length: 40 m
custom-label all EMLF ... markers in white EMLF (108XE)R 0800549 1
accordance with your requirements yellow EMLF (108XE)R YE 0800550 1
silver EMLF (108XE)R SR 0800551 1
Notes: transparent EMLF (108XE)R TR 0800552 1
1) Continuous label, labeled acc. to customer specifications1)
For ordering example, see page 359.
white EMLF (108XE)R CUS 0830183 1
yellow EMLF (108XE)R YE CUS 0830184 1
silver EMLF (108XE)R SR CUS 0830185 1
transparent EMLF (108XE)R TR CUS 0830186 1

278 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Marking and labeling - MARKING system
Device marking
Highly flexible stick-on textile foil Can be printed with:
P R I NT E D
F OR YOU

2
1
1
2
Thermal transfer for rolls

Unlabeled or labeled according to customer

specifications

Technical data
General data
Can be printed with: THERMOMARK ROLL  THERMOMARK ROLL X1  THERMO-
– Textile foil with extremely low restoring MARK X1.1  THERMOMARK X1.2  THERMOMARK S1.1
Material PA
forces Temperature range [°C] -40 ... 150
– Enables labels to be stuck over edges and Wipe resistance DIN EN 61010-1 (VDE 0411-1)
curves Components free from silicone and halogen

– Halogen-free material Ordering data

– Outdoor-durable for one to two years
Pcs. /
when subject to a temperature range Description Color Type Order No.
Pkt.
of -40°C to +150°C Fabric label
– Labeling service: Phoenix Contact can 10,000 labels p. roll white EMLC (5,5X20)R 0817617 1
5000 labels p. roll white EMLC (5,5X40)R 0817620 1
custom-label all EMLC ... markers in 2500 labels p. roll yellow EMLC (15X9)R YE 0800236 1
accordance with your requirements 2500 labels p. roll yellow EMLC (17,5X8)R YE 0800237 1
2500 labels p. roll white EMLC (20X8)R 0815680 1
Notes: 2500 labels p. roll yellow EMLC (20X8)R YE 0800235 1
1) For ordering example, see page 359. 10,000 labels p. roll yellow EMLC (20X8)RL YE 0815800 1
2500 labels p. roll yellow EMLC (25X8)R YE 0800240 1
2500 labels p. roll yellow EMLC (25,4X12,7)R YE 0800238 1
1000 labels p. roll yellow EMLC (38X17)R YE 0800557 1
1000 labels p. roll white EMLC (40X8)R 0800554 1
1000 labels p. roll yellow EMLC (40X8)R YE 0800555 1
750 labels p. roll yellow EMLC (51X25)R YE 0800558 1
Fabric label, labeled according to customer requirements1)
12 labels per strip white EMLC (5,5X20)R CUS 0824350 1
12 labels per strip white EMLC (5,5X40)R CUS 0824351 1
4 labels per strip yellow EMLC (15X9)R YE CUS 0830158 1
5 labels per strip yellow EMLC (17,5X8)R YE CUS 0830159 1
4 labels per strip white EMLC (20X8)R CUS 0824352 1
4 labels per strip yellow EMLC (20X8)R YE CUS 0830157 1
2 labels per strip yellow EMLC (25X8)R YE CUS 0830161 1
2 labels per strip yellow EMLC (25,4X12,7)R YE CUS 0830160 1
2 labels per strip white EMLC (40X8)R CUS 0830162 1
1 label per strip yellow EMLC (40X8)R YE CUS 0830163 1
2 labels per strip yellow EMLC (38X17)R YE CUS 0830164 1
1 label per strip yellow EMLC (51X25)R YE CUS 0830165 1

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 279

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Marking and labeling - MARKING system
Device marking
Device marking for sticking onto Can be printed with:
rough or structured surfaces

2
1
1
2
Thermal transfer for rolls

Unlabeled, white

Technical data
General data
Can be printed with: THERMOMARK ROLL  THERMOMARK ROLL X1  THERMO-
The EML-HA ... self-adhesive device MARK X1.1  THERMOMARK X1.2  THERMOMARK S1.1
Material Polyester
markers have excellent adhesive properties Temperature range [°C] -40 ... 150
on rough, structured, and low-energy Wipe resistance DIN EN 61010-1 (VDE 0411-1)
surfaces, thanks to their special adhesive. Components free from silicone and halogen

– Precise printing quality and good adhesive Ordering data

properties
Pcs. /
– If high-quality ink ribbons are used, the Description   Type Order No.
Pkt.
labeling is resistant to solvents, making it Label, for rough plastic surfaces, highly adhesive
suitable for use even under harsh
2500 labels p. roll EML-HA (15X9)R 0830600 1
industrial conditions 2500 labels p. roll EML-HA (19X6)R 0830601 1
– A wide range of different marker sizes is 2500 labels p. roll EML-HA (20X20)R 0830602 1
available in white and silver for custom 2500 labels p. roll EML-HA (26,5X12)R 0830603 1
2500 labels p. roll EML-HA (40X8)R 0830604 1
designs 1000 labels p. roll EML-HA (40X15)R 0830605 1
– The special packaging protects rolls that 1000 labels p. roll EML-HA (51X25)R 0830729 1
1000 labels p. roll EML-HA (60X30)R 0830606 1
have already been started from the dirt 1000 labels p. roll EML-HA (70X32)R 0830607 1
found in industrial environments 1000 labels p. roll EML-HA (70X50)R 0830730 1
– Labeling service: Phoenix Contact can 250 labels p. roll EML-HA (70X150)R 0830608 1
1000 labels p. roll EML-HA (76X51)R 0830609 1
custom-label all EML-HA ... labels 1000 labels p. roll EML-HA (85X32)R 0830610 1
according to your requirements 300 labels p. roll EML-HA (100X73)R 0830731 1
– The labeling material is UL listed 250 labels p. roll EML-HA (100X90)R 0830732 1
Label, for rough plastic surfaces, highly adhesive, labeled
– Designation example:  according to customer specifications1)
EML-HA (15x9)R 4 labels per strip
4 labels per strip
Lettering field size: 15 x 9 mm 4 labels per strip
Type of packaging: roll 2 labels per strip
2 labels per strip
Notes: 2 labels per strip
1) For ordering example, see page 359. 1 label per strip
1 label per strip
1 label per strip
1 label per strip
1 label per strip
1 label per strip
1 label per strip
1 label per strip
1 label per strip

280 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Marking and labeling - MARKING system
Device marking

P R I NT E D P R I NT E D
F OR YOU F OR YOU

Unlabeled, silver Labeled acc. to customer specifications, white Labeled acc. to customer specifications, silver

Technical data Technical data Technical data

THERMOMARK ROLL  THERMOMARK ROLL X1  THERMO- - -

MARK X1.1  THERMOMARK X1.2  THERMOMARK S1.1
Polyester Polyester Polyester
-40 ... 150 -40 ... 150 -40 ... 150
DIN EN 61010-1 (VDE 0411-1) DIN EN 61010-1 (VDE 0411-1) DIN EN 61010-1 (VDE 0411-1)
free from silicone and halogen free from silicone and halogen free from silicone and halogen

Ordering data Ordering data Ordering data

Pcs. / Pcs. / Pcs. /

Type Order No. Type Order No. Type Order No.
Pkt. Pkt. Pkt.

EML-HA (15X9)R SR 0830611 1

EML-HA (19X6)R SR 0830612 1
EML-HA (20X20)R SR 0830613 1
EML-HA (26,5X12)R SR 0830614 1
EML-HA (40X8)R SR 0830615 1
EML-HA (40X15)R SR 0830616 1
EML-HA (51X25)R SR 0830733 1
EML-HA (60X30)R SR 0830617 1
EML-HA (70X32)R SR 0830618 1
EML-HA (70X50)R SR 0830734 1
EML-HA (70X150)R SR 0830619 1
EML-HA (76X51)R SR 0830620 1
EML-HA (85X32)R SR 0830621 1
EML-HA (100X73)R SR 0830735 1
EML-HA (100X90)R SR 0830736 1

EML-HA (15X9)R CUS 0830622 1 EML-HA (15X9)R SR CUS 0830633 1

EML-HA (19X6)R CUS 0830623 1 EML-HA (19X6)R SR CUS 0830634 1
EML-HA (20X20)R CUS 0830624 1 EML-HA (20X20)R SR CUS 0830635 1
EML-HA (26,5X12)R CUS 0830625 1 EML-HA (26,5X12)R SR CUS 0830636 1
EML-HA (40X8)R CUS 0830626 1 EML-HA (40X8)R SR CUS 0830637 1
EML-HA (40X15)R CUS 0830627 1 EML-HA (40X15)R SR CUS 0830638 1
EML-HA (51X25)R CUS 0830737 1 EML-HA (51X25)R SR CUS 0830741 1
EML-HA (60X30)R CUS 0830628 1 EML-HA (60X30)R SR CUS 0830639 1
EML-HA (70X32)R CUS 0830629 1 EML-HA (70X32)R SR CUS 0830640 1
EML-HA (70X50)R CUS 0830738 1 EML-HA (70X50)R SR CUS 0830742 1
EML-HA (70X150)R CUS 0830630 1 EML-HA (70X150)R SR CUS 0830641 1
EML-HA (76X51)R CUS 0830631 1 EML-HA (76X51)R SR CUS 0830642 1
EML-HA (85X32)R CUS 0830632 1 EML-HA (85X32)R SR CUS 0830643 1
EML-HA (100X73)R CUS 0830739 1 EML-HA (100X73)R SR CUS 0830743 1
EML-HA (100X90)R CUS 0830740 1 EML-HA (100X90)R SR CUS 0830744 1

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 281

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Marking and labeling - MARKING system
Device marking
Stick-on device marking, Can be printed with:
for high-temperature applications

2
1
1
2
Thermal transfer for rolls

Unlabeled

Technical data
General data
Can be printed with: THERMOMARK ROLL  THERMOMARK ROLL X1  THERMO-
– White polyimide labels with high level of MARK X1.1  THERMOMARK X1.2  THERMOMARK S1.1
Material Polyimide
temperature resistance Temperature range [°C] -40 ... 180
– Continuous temperature range of Wipe resistance DIN EN 61010-1 (VDE 0411-1)
-40°C to +180°C, up to +300°C  Components free from silicone and halogen

temporarily, for up to 60 seconds Ordering data

– For marking PCBs, can be used in all
Pcs. /
industrial soldering processes Description Color Type Order No.
Pkt.
– High weathering and chemical resistance High-temperature labels
– The labeling material is UL listed 4000 labels p. roll white EML-HT (8X8)R 0800340 1
4000 labels p. roll white EML-HT (15X6)R 0830644 1
– Protection against tampering: the labels 4000 labels p. roll white EML-HT (15X15)R 0800341 1
cannot be removed without disintegrating 4000 labels p. roll white EML-HT (20X7)R 0830645 1
– Designation example:  4000 labels p. roll white EML-HT (24X4)R 0830646 1
4000 labels p. roll white EML-HT (25X8)R 0830647 1
EML-HT (8x8)R 2500 labels p. roll white EML-HT (25,4X12,7)R 0830648 1
Lettering field size: 8 x 8 mm 2500 labels p. roll white EML-HT (32X10)R 0830649 1
Type of packaging: roll 2500 labels p. roll white EML-HT (35X6,5)R 0830650 1
1000 labels p. roll white EML-HT (40X15)R 0800339 1
– Single-web large roll with 8000 or 10,000 2500 labels p. roll white EML-HT (45X5)R 0800337 1
labels (see figure below) 1000 labels p. roll white EML-HT (50X10)R 0800338 1
1000 labels p. roll, round, 12 mm diameter white EML-HT (D12)R 0801376 1
Notes:
High-temperature labels, on large roll
The THERMOMARK-RIBBON 110-EML-HT ink ribbon is
10,000 labels p. roll white
required for marking EM-LHT... high-temperature labels,
see Printers, page 39. 10,000 labels p. roll white
8000 labels p. roll white
If large rolls are processed with the THERMOMARK ROLL, the ex- 10,000 labels p. roll white
ternal THERMOMARK ROLL-ERH media hub must be used.
10,000 labels p. roll white
10,000 labels p. roll white
1) For ordering example, see page 359. 10,000 labels p. roll white
10,000 labels p. roll white
10,000 labels p. roll white
8000 labels p. roll white
10,000 labels p. roll white
10,000 labels p. roll white
High-temperature label, labeled acc. to customer
specifications1)
4 labels per strip white
5 labels per strip white
4 labels per strip white
4 labels per strip white
2 labels per strip white
2 labels per strip white
3 labels per strip white
2 labels per strip white
2 labels per strip white
2 labels per strip white
4 labels per strip white
1 label per strip white

Accessories
Ink ribbon, specifically for high-temperature labels, EML-HT...

black THERMOMARK-RIBBON 110-EML-HT 0800342 1

282 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Marking and labeling - MARKING system
Device marking

P R I NT E D
F OR YOU

Unlabeled, on large roll Labeled according to customer specifications

Technical data Technical data

THERMOMARK ROLL  THERMOMARK ROLL X1  THERMO- -

MARK X1.1  THERMOMARK X1.2  THERMOMARK S1.1
Polyimide Polyimide
-40 ... 180 -40 ... 180
DIN EN 61010-1 (VDE 0411-1) DIN EN 61010-1 (VDE 0411-1)
free from silicone and halogen free from silicone and halogen

Ordering data Ordering data

Pcs. / Pcs. /
Type Order No. Type Order No.
Pkt. Pkt.

EML-HT (8X8)RL-T 0830651 1

EML-HT (15X6)RL-T 0830652 1
EML-HT (15X15)RL-T 0830653 1
EML-HT (20X7)RL-T 0830654 1
EML-HT (24X4)RL-T 0830655 1
EML-HT (25X8)RL-T 0830656 1
EML-HT (25,4X12,7)RL-T 0830657 1
EML-HT (32X10)RL-T 0830658 1
EML-HT (35X6,5)RL-T 0830659 1
EML-HT (40X15)RL-T 0830660 1
EML-HT (45X5)RL-T 0830661 1
EML-HT (50X10)RL-T 0830662 1

EML-HT (8X8)R CUS 0830169 1

EML-HT (15X6)R CUS 0830663 1
EML-HT (15X15)R CUS 0830170 1
EML-HT (20X7)R CUS 0830664 1
EML-HT (24X4)R CUS 0830665 1
EML-HT (25X8)R CUS 0830666 1
EML-HT (25,4X12,7)R CUS 0830667 1
EML-HT (32X10)R CUS 0830668 1
EML-HT (35X6,5)R CUS 0830669 1
EML-HT (40X15)R CUS 0830168 1
EML-HT (45X5)R CUS 0830166 1
EML-HT (50X10)R CUS 0830167 1

Accessories Accessories

THERMOMARK-RIBBON 110-EML-HT 0800342 1

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 283

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Marking and labeling - MARKING system
Device marking
Stick-on device marking, Can be printed with:
for ESD applications

2
1
1
2
Thermal transfer for rolls

Unlabeled

Technical data
General data
Can be printed with: THERMOMARK ROLL  THERMOMARK ROLL X1  THERMO-
– Safe marking for sensitive components on MARK S1.1  THERMOMARK X1.1  THERMOMARK X1.2
Material Polyester
PCBs Temperature range [°C] -40 ... 150
– Static dissipative adhesive: prevents trans- Wipe resistance DIN EN 61010-1 (VDE 0411-1)
mission of voltage and protects the com- Components free from silicone and halogen

ponent against electrostatic discharge Ordering data

– Marking service: Phoenix Contact can
Pcs. /
custom-mark all EML-ESD ... markers Description Color Type Order No.
Pkt.
according to your requirements Device marking, roll
– Designation example:  4000 labels p. roll white EML-ESD (8X8)R 0830564 1
4000 labels p. roll white EML-ESD (15X6)R 0830565 1
EML-ESD (8x8)R 4000 labels p. roll white EML-ESD (15X15)R 0830566 1
Lettering field size: 8 x 8 mm 4000 labels p. roll white EML-ESD (20X7)R 0830567 1
Type of packaging: roll 4000 labels p. roll white EML-ESD (24X4)R 0830568 1
4000 labels p. roll white EML-ESD (25X8)R 0830569 1
Notes: 2500 labels p. roll white EML-ESD (25,4X12,7)R 0830570 1
2500 labels p. roll white EML-ESD (32X10)R 0830571 1
If large rolls are processed with the THERMOMARK ROLL,
2500 labels p. roll white EML-ESD (35X6,5)R 0830572 1
the external THERMOMARK ROLL-ERH media hub
must be used. 2500 labels p. roll white EML-ESD (40X15)R 0830573 1
2500 labels p. roll white EML-ESD (45X5)R 0830574 1
1) For ordering example, see page 359. 1000 labels p. roll white EML-ESD (50X10)R 0830575 1
Device marking, roll
10,000 labels p. roll white
10,000 labels p. roll white
8000 labels p. roll white
10,000 labels p. roll white
10,000 labels p. roll white
10,000 labels p. roll white
10,000 labels p. roll white
10,000 labels p. roll white
10,000 labels p. roll white
8000 labels p. roll white
10,000 labels p. roll white
10,000 labels p. roll white
Device marking, roll, marked according to customer
specifications1)
4 labels per strip white
5 labels per strip white
4 labels per strip white
4 labels per strip white
2 labels per strip white
2 labels per strip white
3 labels per strip white
2 labels per strip white
2 labels per strip white
2 labels per strip white
2 labels per strip white
1 label per strip white

284 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Marking and labeling - MARKING system
Device marking

P R I NT E D
F OR YOU

Unlabeled, on large roll Labeled according to customer specifications

Technical data Technical data

THERMOMARK ROLL  THERMOMARK ROLL X1  THERMO- -

MARK S1.1  THERMOMARK X1.1  THERMOMARK X1.2
Polyester Polyester
-40 ... 150 -40 ... 150
DIN EN 61010-1 (VDE 0411-1) DIN EN 61010-1 (VDE 0411-1)
free from silicone and halogen free from silicone and halogen

Ordering data Ordering data

Pcs. / Pcs. /
Type Order No. Type Order No.
Pkt. Pkt.

EML-ESD (8X8)RL-T 0830576 1

EML-ESD (15X6)RL-T 0830577 1
EML-ESD (15X15)RL-T 0830578 1
EML-ESD (20X7)RL-T 0830579 1
EML-ESD (24X4)RL-T 0830580 1
EML-ESD (25X8)RL-T 0830581 1
EML-ESD (25,4X12,7)RL-T 0830582 1
EML-ESD (32X10)RL-T 0830583 1
EML-ESD (35X6,5)RL-T 0830584 1
EML-ESD (40X15)RL-T 0830585 1
EML-ESD (45X5)RL-T 0830586 1
EML-ESD (50X10)RL-T 0830587 1

EML-ESD (8X8)R CUS 0830588 1

EML-ESD (15X6)R CUS 0830589 1
EML-ESD (15X15)R CUS 0830590 1
EML-ESD (20X7)R CUS 0830591 1
EML-ESD (24X4)R CUS 0830592 1
EML-ESD (25X8)R CUS 0830593 1
EML-ESD (25,4X12,7)R CUS 0830594 1
EML-ESD (32X10)R CUS 0830595 1
EML-ESD (35X6,5)R CUS 0830596 1
EML-ESD (40X15)R CUS 0830597 1
EML-ESD (45X5)R CUS 0830598 1
EML-ESD (50X10)R CUS 0830599 1

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 285

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Marking and labeling - MARKING system
Device marking
Stick-on device marking, removable Can be printed with:

2
1
1
2
Thermal transfer for rolls

Unlabeled

Technical data
General data
Can be printed with: THERMOMARK ROLL  THERMOMARK ROLL X1  THERMO-
– Particularly suitable for temporary marking MARK X1.1  THERMOMARK X1.2  THERMOMARK S1.1
Material Polyester
– The labels adhere well and reliably, and Temperature range [°C] -40 ... 120
can be removed easily and residue-free if Wipe resistance DIN EN 61010-1 (VDE 0411-1)
required Components free from silicone and halogen

– The labels cannot be reused following re- Ordering data

moval
Pcs. /
– Marking service: Phoenix Contact can Description Color Type Order No.
Pkt.
custom-mark all EML-RM ... markers ac- Labels, removable
cording to your requirements 4000 labels p. roll white EML-RM (8X8)R 0830528 1
4000 labels p. roll white EML-RM (15X6)R 0830529 1
– Designation example:  4000 labels p. roll white EML-RM (15X15)R 0830530 1
EML-RM (8x8)R 4000 labels p. roll white EML-RM (20X7)R 0830531 1
Lettering field size: 8 x 8 mm 4000 labels p. roll white EML-RM (24X4)R 0830532 1
4000 labels p. roll white EML-RM (25X8)R 0830533 1
Type of packaging: roll 2500 labels p. roll white EML-RM (25,4X12,7)R 0830534 1
2500 labels p. roll white EML-RM (32X10)R 0830535 1
Notes:
2500 labels p. roll white EML-RM (35X6,5)R 0830536 1
If large rolls are processed with the THERMOMARK ROLL, 2500 labels p. roll white EML-RM (40X15)R 0830537 1
the external THERMOMARK ROLL-ERH media hub 2500 labels p. roll white EML-RM (45X5)R 0830538 1
must be used. 1000 labels p. roll white EML-RM (50X10)R 0830539 1
1) For ordering example, see page 359. Labels, on large roll, removable

10,000 labels p. roll white

10,000 labels p. roll white
8000 labels p. roll white
10,000 labels p. roll white
10,000 labels p. roll white
10,000 labels p. roll white
10,000 labels p. roll white
10,000 labels p. roll white
10,000 labels p. roll white
8000 labels p. roll white
10,000 labels p. roll white
10,000 labels p. roll white
Labels, removable, labeled according to customer
specifications1)
4 labels per strip white
5 labels per strip white
4 labels per strip white
4 labels per strip white
2 labels per strip white
2 labels per strip white
3 labels per strip white
2 labels per strip white
2 labels per strip white
2 labels per strip white
2 labels per strip white
1 label per strip white

Accessories
Ink ribbon, length: 300 m, width: 110 mm
black THERMOMARK-RIBBON 110 5145384 1

286 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Marking and labeling - MARKING system
Device marking

P R I NT E D
F OR YOU

Unlabeled, on large roll Labeled according to customer specifications

Technical data Technical data

THERMOMARK ROLL  THERMOMARK ROLL X1  THERMO- -

MARK X1.1  THERMOMARK X1.2  THERMOMARK S1.1
Polyester Polyester
-40 ... 120 -40 ... 120
DIN EN 61010-1 (VDE 0411-1) DIN EN 61010-1 (VDE 0411-1)
free from silicone and halogen free from silicone and halogen

Ordering data Ordering data

Pcs. / Pcs. /
Type Order No. Type Order No.
Pkt. Pkt.

EML-RM (8X8)RL-T 0830540 1

EML-RM (15X6)RL-T 0830541 1
EML-RM (15X15)RL-T 0830542 1
EML-RM (20X7)RL-T 0830543 1
EML-RM (24X4)RL-T 0830544 1
EML-RM (25X8)RL-T 0830545 1
EML-RM (25,4X12,7)RL-T 0830546 1
EML-RM (32X10)RL-T 0830547 1
EML-RM (35X6,5)RL-T 0830548 1
EML-RM (40X15)RL-T 0830549 1
EML-RM (45X5)RL-T 0830550 1
EML-RM (50X10)RL-T 0830551 1

EML-RM (8X8)R CUS 0830552 1

EML-RM (15X6)R CUS 0830553 1
EML-RM (15X15)R CUS 0830554 1
EML-RM (20X7)R CUS 0830555 1
EML-RM (24X4)R CUS 0830556 1
EML-RM (25X8)R CUS 0830557 1
EML-RM (25,4X12,7)R CUS 0830558 1
EML-RM (32X10)R CUS 0830559 1
EML-RM (35X6,5)R CUS 0830560 1
EML-RM (40X15)R CUS 0830561 1
EML-RM (45X5)R CUS 0830562 1
EML-RM (50X10)R CUS 0830563 1

Accessories Accessories

THERMOMARK-RIBBON 110 5145384 1

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 287

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Marking and labeling - MARKING system
Device marking
Stick-on device marking, Can be printed with:
with anti-tamper protection

2
11
2
Thermal transfer for rolls

Unlabeled

Technical data
General data
Can be printed with: THERMOMARK ROLL  THERMOMARK ROLL X1  THERMO-
– Tamper-proof label, can be used as a MARK X1.1  THERMOMARK X1.2  THERMOMARK S1.1
Material Polyester
rating plate or seal, for example Temperature range [°C] -40 ... 150
– When peeled off, part of the metallic lay- Wipe resistance DIN EN 61010-1 (VDE 0411-1)
er comes away, leaving behind a triangular Components free from silicone and halogen

pattern on both the label and the surface Ordering data

– The safety function is reliable up to 80°C
Pcs. /
– Labeling service: Phoenix Contact can Description Color Type Order No.
Pkt.
custom-label all EMLS ... markers in Safety labels
accordance with your requirements 2500 labels p. roll silver EMLS (15X9)R SR 0800347 1
2500 labels p. roll silver EMLS (19X6)R SR 0800343 1
– The EMLS ... materials are UL-listed 1000 labels p. roll silver EMLS (20X20)R SR 0800344 1
– Designation example: 1000 labels p. roll silver EMLS (26,5X12)R SR 0800353 1
EMLS (15x9)R SR 1000 labels p. roll silver EMLS (38,1X19)R SR 0800354 1
1000 labels p. roll silver EMLS (40X8)R SR 0800348 1
Lettering field size: 15 x 9 mm 1000 labels p. roll silver EMLS (40X15)R SR 0800345 1
Type of packaging: roll 500 labels p. roll silver EMLS (60X30)R SR 0800355 1
500 labels p. roll silver EMLS (70X32)R SR 0800346 1
100 labels p. roll silver EMLS (70X150)R SR 0800351 1
250 labels p. roll silver EMLS (76X51)R SR 0800350 1
250 labels p. roll silver EMLS (85X32)R SR 0800356 1

288 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Marking and labeling - MARKING system
Device marking
Stick-on device marking, with anti-
tamper protection
P R I NT E D
F OR YOU
– All EMLS ... device markers can also be
supplied marked according to customer
requirements
Notes:
1) For ordering example, see page 359.

Labeled according to customer specifications

Technical data
General data

Material Polyester
Temperature range [°C] -40 ... 150
Wipe resistance DIN EN 61010-1 (VDE 0411-1)
Components free from silicone and halogen

Ordering data

Pcs. /
Description Color Type Order No.
Pkt.
Safety label, labeled acc. to customer specifications1)
4 labels per strip silver EMLS (15X9)R SR CUS 0830175 1
4 labels per strip silver EMLS (19X6)R SR CUS 0830171 1
4 labels per strip silver EMLS (20X20)R SR CUS 0830172 1
2 labels per strip silver EMLS (26,5X12)R SR CUS 0830179 1
2 labels per strip silver EMLS (38,1X19)R SR CUS 0830180 1
2 labels per strip silver EMLS (40X8)R SR CUS 0830176 1
2 labels per strip silver EMLS (40X15)R SR CUS 0830173 1
1 label per strip silver EMLS (60X30)R SR CUS 0830181 1
1 label per strip silver EMLS (70X32)R SR CUS 0830174 1
1 label per strip silver EMLS (70X150)R SR CUS 0830178 1
1 label per strip silver EMLS (76X51)R SR CUS 0830177 1
1 label per strip silver EMLS (85X32)R SR CUS 0830182 1

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 289

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Marking and labeling - MARKING system
Device marking
Snap-in device markers for Axioline Can be printed with:
systems from Phoenix Contact
P R I NT E D
F OR YOU

2
11
2
Thermal transfer for rolls

Unlabeled or labeled according to customer

specifications

Technical data
General data
Can be printed with: THERMOMARK ROLL  THERMOMARK ROLL X1  THERMO-
– EMT ... insert strips are available in differ- MARK X1.1  THERMOMARK X1.2  THERMOMARK S1.1
Material Polyester
ent sizes for labeling the Axioline modules Temperature range [°C] -40 ... 120
from Phoenix Contact Wipe resistance DIN EN 61010-1 (VDE 0411-1)
– EMT (62...)R insert strips are available in Components free from silicone and halogen

different sizes for labeling the Ordering data

Inline modules from Phoenix Contact
Pcs. /
– Can be printed using all the thermal transfer Description Color Type Order No.
Pkt.
printers available from Phoenix Contact Insert strips for Axioline modules
– Precise printing quality 500 labels per roll, lettering field size: 35 x 28 mm white EMT (35X28)R 0801602 1
– An overview of the devices that support 500 labels per roll, lettering field size: 35 x 28 mm yellow EMT (35X28)R YE 0801603 1
labeling can be found starting
500 labels per roll, lettering field size: 35 x 46 mm white EMT (35X46)R 0801604 1
on page 304
500 labels per roll, lettering field size: 35 x 46 mm yellow EMT (35X46)R YE 0801605 1
Notes:
1) For ordering example, see page 359. Insert strips for Inline modules, white EMT (62X10)R 0800057 1
500 labels per roll, lettering field size: 62 x 10 mm

500 labels per roll, lettering field size: 62 x 10 mm yellow EMT (62X10)R YE 0800477 1

250 labels per roll, lettering field size: 62 x 46 mm white EMT (62X46)R 0800059 1

250 labels per roll, lettering field size: 62 x 46 mm yellow EMT (62X46)R YE 0800478 1

Insert strips for Axioline modules, labeled white EMT (35X28)R CUS 0830391 1
according to customer specifications,
2 markers per strip, lettering field size: 35 x 28 mm1)

2 markers per strip, lettering field size: 35 x 28 mm yellow EMT (35X28)R YE CUS 0830392 1

2 markers per strip, lettering field size: 35 x 46 mm white EMT (35X46)R CUS 0830393 1

2 markers per strip, lettering field size: 35 x 46 mm yellow EMT (35X46)R YE CUS 0830394 1

Insert strips for Inline modules, labeled white EMT (62X10)R CUS 0830251 1
according to customer specifications,
1 marker per strip, lettering field size: 62 x 10 mm1)

1 marker per strip, lettering field size: 62 x 10 mm yellow EMT (62X10)R YE CUS 0830252 1

1 marker per strip, lettering field size: 62 x 46 mm white EMT (62X46)R CUS 0830253 1

1 marker per strip, lettering field size: 62 x 46 mm yellow EMT (62X46)R YE CUS 0830254 1

290 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Marking and labeling - MARKING system
Device marking
Device markers Can be printed with:
for Siemens ET 200SP controllers
P R I NT E D
F OR YOU
– EMT ... insert strips are available for
marking Siemens controllers

2
1
– Can be printed using all the thermal transfer

1
2
printers available from Phoenix Contact
– Precise printing quality Thermal transfer for rolls
– An overview of the devices that support
labeling can be found starting
on page 304
Notes:
Unlabeled or labeled according to customer
For additional information on the use of Siemens devices, see the
product area on our website at www.phoenixcontact.net/products. specifications

1) For ordering example, see page 359.

Technical data
General data
Can be printed with: THERMOMARK ROLL  THERMOMARK ROLL X1  THERMO-
MARK X1.1  THERMOMARK X1.2  THERMOMARK S1.1
Material Polyester
Temperature range [°C] -40 ... 120
Wipe resistance DIN EN 61010-1 (VDE 0411-1)
Components free from silicone and halogen

Ordering data

Pcs. /
Description Color Type Order No.
Pkt.
Insert strips
500 labels per roll, lettering field size: 31 x 12.5 mm gray EMT (31X12,5)R GY 0801612 1

500 labels per roll, lettering field size: 50 x 26 mm white EMT (50X26)R 0800052 1

500 labels per roll, lettering field size: 50 x 26 mm turquoise EMT (50X26)R TQ 0800053 1

500 labels per roll, lettering field size: 50 x 26 mm yellow EMT (50X26)R YE 0800054 1

500 labels per roll, lettering field size: 103 x 17 mm white EMT (103X17)R 0800039 1

500 labels per roll, lettering field size: 103 x 17 mm turquoise EMT (103X17)R TQ 0800041 1

500 labels per roll, lettering field size: 103 x 17 mm yellow EMT (103X17)R YE 0800436 1

500 labels per roll, lettering field size: 103 x 23 mm white EMT (103X23)R 0800040 1

500 labels per roll, lettering field size: 103 x 23 mm yellow EMT (103X23)R YE 0800437 1

500 labels per roll, lettering field size: 103 x 23 mm turquoise EMT (103X23)R TQ 0800042 1

Insert strips with two lettering field sizes per roll, white EMT (50/28X13)R 0800049 1
with 250 of each size measuring: 50 and 27.5 x 12.8 mm
with 250 each of 50 x 12.8 mm and 27.5 x 12.8 mm yellow EMT (50/28X13)R YE 0800438 1

with 250 each of 50 x 12.8 mm and 27.5 x 12.8 mm turquoise EMT (50/28X13)R TQ 0800050 1

Insert strips, labeled according to customer gray EMT (31X12,5)R GY CUS 0830390 1
specifications, 2 markers per strip,
lettering field size: 31 x 12.5 mm1)
2 markers per strip, lettering field size: 50 x 26 mm white EMT (50X26)R CUS 0830248 1

2 markers per strip, lettering field size: 50 x 26 mm turquoise EMT (50X26)R TQ CUS 0830249 1

2 markers per strip, lettering field size: 50 x 26 mm yellow EMT (50X26)R YE CUS 0830250 1

2 markers per strip, white EMT (103X17)R CUS 0830238 1

lettering field size: 103 x 17 mm
2 markers per strip, turquoise EMT (103X17)R TQ CUS 0830239 1
lettering field size: 103 x 17 mm
2 markers per strip, yellow EMT (103X17)R YE CUS 0830240 1
lettering field size: 103 x 17 mm
2 markers per strip, white EMT (103X23)R CUS 0830241 1
lettering field size: 103 x 23 mm
2 markers per strip, turquoise EMT (103X23)R TQ CUS 0830242 1
lettering field size: 103 x 23 mm
2 markers per strip, yellow EMT (103X23)R YE CUS 0830243 1
lettering field size: 103 x 23 mm
Insert strips with two lettering field sizes per white EMT (50/28X13)R CUS 0830245 1
roll, labeled according to customer specifica-
tions, with 250 each of 50 and 27.5 x 12.8 mm
with 250 each of 50 x 12.8 mm and 27.5 x 12.8 mm turquoise EMT (50/28X13)R TQ CUS 0830246 1

with 250 each of 50 x 12.8 mm and 27.5 x 12.8 mm yellow EMT (50/28X13)R YE CUS 0830247 1

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 291

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Marking and labeling - MARKING system
Device marking
Stick-on device marking Can be printed with:
P R I NT E D
F OR YOU

3
2
1

Laser

Unlabeled or labeled according to customer

specifications

Technical data
General data
Can be printed with: Office printing systems
– These labels have been specially Material Polyester
developed for laser printers Temperature range [°C] -40 ... 100
Wipe resistance DIN EN 61010-1 (VDE 0411-1)
– Can be printed on all commercially avail- Components Silicone-free
able laser printers Ordering data
– The unperforated SK U ... sheets are
available for custom label designs Description Color Type Order No.
Pcs. /
Pkt.
– Labeling service: Phoenix Contact can
Sheet of labels for laser printer, DIN A4
custom-label all BMKL ... markers in 1 sheet = 273 labels white BMKL 12X12 WH 5032361 10
accordance with your requirements 1 sheet = 290 labels white BMKL 15X 9 WH 0803663 10
1 sheet = 396 labels white BMKL 18X 6 WH 5032293 10
Notes: 1 sheet = 288 labels white BMKL 18X 8 WH 5032329 10
Print image may vary depending on laser printer. 1 sheet = 224 labels white BMKL 20X 8 WH 5032280 10
1 sheet = 224 labels white BMKL 25X 8 WH 5032332 10
1) For ordering example, see page 359. 1 sheet = 147 labels white BMKL 25X12 WH 5032374 10
1 sheet = 228 labels white BMKL 26,8X6,8 WH 0807106 10
1 sheet = 63 labels white BMKL 50X12 WH 5032387 10
1 sheet = 45 labels white BMKL 64X16 WH 0821807 2
1 sheet = 21 labels white BMKL 64X34 WH 5032400 10
1 sheet = 290 labels yellow BMKL 15X 9 YE 5032497 10
1 sheet = 405 labels yellow BMKL 16X 6 YE 0807096 10
1 sheet = 288 labels yellow BMKL 18X 8 YE 5032170 10
1 sheet = 168 labels yellow BMKL 19X11 YE 0800705 10
1 sheet = 224 labels yellow BMKL 20X 8 YE 5032138 10
1 sheet = 162 labels yellow BMKL 26X10 YE 0811516 10
1 sheet = 45 labels yellow BMKL 64X16 YE 0821810 2
1 sheet = 192 labels silver BMKL 27X 8 SR 0803702 10
1 sheet = 126 labels silver BMKL 27X12,5 SR 0803676 10
1 sheet = 84 labels silver BMKL 27X18 SR 0803689 10
1 sheet = 54 labels silver BMKL 27X27 SR 0803692 10
1 sheet = 360 labels orange BMKL 18X 6,5 OG 5036147 10
1
Label sheets, labeled acc. to customer specifications )
1 sheet = 273 labels white BMKL 12X12 WH CUS 0824238 1
1 sheet = 290 labels white BMKL 15X 9 WH CUS 0824239 1
1 sheet = 396 labels white BMKL 18X 6 WH CUS 0824242 1
1 sheet = 288 labels white BMKL 18X 8 WH CUS 0824244 1
1 sheet = 224 labels white BMKL 20X 8 WH CUS 0824247 1
1 sheet = 224 labels white BMKL 25X 8 WH CUS 0824249 1
1 sheet = 147 labels white BMKL 25X12 WH CUS 0824250 1
1 sheet = 228 labels white BMKL 26,8X6,8 WH CUS 0824251 1
1 sheet = 63 labels white BMKL 50X12 WH CUS 0824257 1
1 sheet = 45 labels white BMKL 64X16 WH CUS 0824259 1
1 sheet = 21 labels white BMKL 64X34 WH CUS 0824261 1
1 sheet = 290 labels yellow BMKL 15X 9 YE CUS 0824240 1
1 sheet = 405 labels yellow BMKL 16X 6 YE CUS 0824241 1
1 sheet = 288 labels yellow BMKL 18X 8 YE CUS 0824245 1
1 sheet = 168 labels yellow BMKL 19X11 YE CUS 0824246 1
1 sheet = 224 labels yellow BMKL 20X 8 YE CUS 0824248 1
1 sheet = 162 labels yellow BMKL 26X10 YE CUS 0824252 1
1 sheet = 45 labels yellow BMKL 64X16 YE CUS 0824260 1
1 sheet = 192 labels silver BMKL 27X 8 SR CUS 0824253 1
1 sheet = 126 labels silver BMKL 27X12,5 SR CUS 0824254 1
1 sheet = 84 labels silver BMKL 27X18 SR CUS 0824255 1
1 sheet = 54 labels silver BMKL 27X27 SR CUS 0824256 1
1 sheet = 360 labels orange BMKL 18X 6,5 OG CUS 0824243 1
Marking sheet, unperforated, self-adhesive, DIN A4 format

white SK U WH:UNGESTANZT 0800129 10

yellow SK U YE:UNGESTANZT 0800132 10
silver SK U SR:UNGESTANZT 0800145 10

292 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Marking and labeling - MARKING system
Device marking
Stick-on device marking Can be printed with:
P R I NT E D
F OR YOU

y
123
x
Plotter

Unlabeled or labeled according to customer

specifications

Technical data
General data
Can be printed with: CMS-P1-PLOTTER
– Self-adhesive labels for labeling by hand or Material Polyester foil
with a plotter Temperature range [°C] -40 ... 80
Components Silicone-free
– Secure adhesion even on curved or un-
even surfaces as well as at corners Ordering data
– Available in various dimensions Description Color Type Order No.
Pcs. /
– Labeling service: Phoenix Contact can Pkt.

custom-label all BMK ... markers in accor- Label sheet

1 sheet = 270 labels white BMK 20X 8 WH 0805470 10
dance with your requirements 1 sheet = 324 labels yellow BMK 15X 9 YE 5031605 10
1 sheet = 198 labels yellow BMK 19X11 YE 5031582 10
Notes:
1 sheet = 270 labels yellow BMK 20X 8 YE 5031388 10
1) For ordering example, see page 359. 1 sheet = 88 labels yellow BMK 38X11 YE 5031676 10
Labels, labeled according to customer requirements1)
1 sheet = 270 labels white BMK 20X 8 WH CUS 0824231 1
1 sheet = 324 labels yellow BMK 15X 9 YE CUS 0824229 1
1 sheet = 198 labels yellow BMK 19X11 YE CUS 0824230 1
1 sheet = 270 labels yellow BMK 20X 8 YE CUS 0824232 1
1 sheet = 88 labels yellow BMK 38X11 YE CUS 0824233 1

Accessories
Magazine for accommodating sheet material, self-adhesive
mat for fixing labels, foils and paper, size of sheet max. DIN A4

CMS-P1-PAD 5144819 1

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 293

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Marking and labeling - MARKING system
Device marking
Stick-on device marking, can be Can be printed with:
engraved or labeled with writing
P R I NT E D
F OR YOU

y
123
x
Engraving Plotter

Unlabeled or labeled according to customer

specifications

Technical data
General data
Can be printed with: P1 ENGRAVING UNIT  CMS-P1-PLOTTER
– The label sheet is made up of prefabricat- Material TRANSPLY-ABS
ed, individual self-adhesive labels Temperature range [°C] -40 ... 120
Wipe resistance DIN EN 61010-1 (VDE 0411-1)
– The adhesive foil used ensures good adhe- Components free from silicone and halogen
sive properties, even on uneven surfaces Ordering data
– Can be easily labeled using the
CMS-P1-PLOTTER Description Color Type Order No.
Pcs. /
Pkt.
– Can be engraved using the
Plastic label sheet, self-adhesive double-layer plastic labels,
P1 ENGRAVING UNIT material thickness: 0.8 mm, square corners
– Two-layer material
1 sheet = 120 labels white GPE 13X 9 WH 0806932 10
– Labeling service: Phoenix Contact can 1 sheet = 75 labels white GPE 17,5X12 WH 0806916 10
custom-label all GPE ... markers in 1 sheet = 100 labels white GPE 20X 7 WH 0806990 10
accordance with your requirements 1 sheet = 88 labels white GPE 20X 8 WH 0806945 10
1 sheet = 60 labels white GPE 22X12 WH 0806929 10
Notes: 1 sheet = 9 labels white GPE 52X26 WH 0806958 10
1 sheet = 9 labels white GPE 60X30 WH 0806961 10
For matching magazines to accommodate the label sheets, 1 sheet = 21 labels red/white GPE 60X12 RD-WH 0824202 10
see page 46.
1 sheet = 5 labels yellow GPE 70X32 YE 0824215 10
1) For ordering example, see page 359. 1 sheet = 30 labels silver GPE 28X17,5 SR 0807889 10
Plastic label sheet, labeled according to customer
requirements ) 1

1 sheet = 120 labels white GPE 13X 9 WH CUS 0824414 1

1 sheet = 75 labels white GPE 17,5X12 WH CUS 0824415 1
1 sheet = 100 labels white GPE 20X 7 WH CUS 0824416 1
1 sheet = 88 labels white GPE 20X 8 WH CUS 0824417 1
1 sheet = 60 labels white GPE 22X12 WH CUS 0824418 1
1 sheet = 9 labels white GPE 52X26 WH CUS 0824429 1
1 sheet = 9 labels white GPE 60X30 WH CUS 0824432 1
1 sheet = 21 labels red/white GPE 60X12 RD-WH CUS 0827720 1
1 sheet = 5 labels yellow GPE 70X32 YE CUS 0827721 1
Plastic label sheet, self-adhesive double-layer plastic labels,
material thickness: 0.8 mm, with rounded corners, radius: 2 mm

1 sheet = 66 labels white GPE 27X 8 WH/R 0815198 10

1 sheet = 30 labels white GPE 27X18 WH/R 0815208 10
1 sheet = 26 labels white GPE 45X14 WH/R 0815282 10
1 sheet = 21 labels white GPE 60X12 WH/R 0807630 10
1 sheet = 9 labels white GPE 60X30 WH/R 0815292 10
1 sheet = 32 labels silver GPE 22X22 SR/R 0806628 10
1 sheet = 66 labels silver GPE 27X 8 SR/R 0806877 10
1 sheet = 42 labels silver GPE 27X12,5 SR/R 0806880 10
1 sheet = 30 labels silver GPE 27X18 SR/R 0806893 10
1 sheet = 18 labels silver GPE 27X27 SR/R 0806903 10
1 sheet = 26 labels silver GPE 45X14 SR/R 0807009 10
1 sheet = 21 labels silver GPE 60X12 SR/R 0806631 10
Plastic label sheet, with rounded corners, radius 2 mm, labeled
according to customer requirements ) 1

1 sheet = 66 labels white GPE 27X 8 WH/R CUS 0824421 1

1 sheet = 30 labels white GPE 27X18 WH/R CUS 0824424 1
1 sheet = 26 labels white GPE 45X14 WH/R CUS 0824428 1
1 sheet = 21 labels white GPE 60X12 WH/R CUS 0824431 1
1 sheet = 9 labels white GPE 60X30 WH/R CUS 0824433 1
1 sheet = 32 labels silver GPE 22X22 SR/R CUS 0824419 1
1 sheet = 66 labels silver GPE 27X 8 SR/R CUS 0824420 1
1 sheet = 42 labels silver GPE 27X12,5 SR/R CUS 0824422 1
1 sheet = 30 labels silver GPE 27X18 SR/R CUS 0824423 1
1 sheet = 18 labels silver GPE 27X27 SR/R CUS 0824425 1
1 sheet = 30 labels silver GPE 28X17,5 SR CUS 0824426 1
1 sheet = 26 labels silver GPE 45X14 SR/R CUS 0824427 1
1 sheet = 21 labels silver GPE 60X12 SR/R CUS 0824430 1
294 PHOENIX CONTACT
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Marking and labeling - MARKING system
Device marking
Stick-on device marking, can be en- Can be printed with:
graved or labeled with writing
P R I NT E D
F OR YOU

y
123
x
Engraving Plotter

Unlabeled or labeled according to customer

specifications

Technical data
General data
Can be printed with: P1 ENGRAVING UNIT  CMS-P1-PLOTTER
– High level of resistance to chemical and Material TRANSPLY-ABS
mechanical effects Temperature range [°C] -40 ... 120
Wipe resistance DIN EN 61010-1 (VDE 0411-1)
– High-quality appearance Components free from silicone and halogen
– Can be easily labeled using the Ordering data
CMS-P1-PLOTTER
– Can be engraved using the Description Color Type Order No.
Pcs. /
Pkt.
P1 ENGRAVING UNIT
Plastic label sheet, with a hole for 24 mm Ø pushbutton, self-
– For marking components, devices, and adhesive double-layer plastic labels, material thickness: 0.8 mm
buttons
1 sheet = 6 labels white EMLP 24 (30X12) 0822301 1
– Labeling service: Phoenix Contact can 1 sheet = 6 labels black EMLP 24 (30X12) BK 0822314 1
custom-label all EMLP ... markers in 1 sheet = 6 labels silver EMLP 24 (30X12) SR 0822330 1
accordance with your requirements Plastic label sheet, with a hole for a 24 mm Ø button, self-adhe-
sive double-layer plastic labels, material thickness: 0.8 mm,
labeled according to customer specifications1)
Notes:
1) For ordering example, see page 359. 1 sheet = 6 labels white EMLP 24 (30X12) CUS 0824364 1
1 sheet = 6 labels black EMLP 24 (30X12) BK CUS 0824365 1
1 sheet = 6 labels silver EMLP 24 (30X12) SR CUS 0824366 1
Plastic label sheet, with a hole for 32 mm Ø pushbutton, self-
adhesive double-layer plastic labels, material thickness: 0.8 mm

1 sheet = 6 labels white EMLP 32 (38X14) 0822291 1

1 sheet = 6 labels black EMLP 32 (38X14) BK 0822327 1
1 sheet = 6 labels silver EMLP 32 (38X14) SR 0822343 1
Plastic label sheet, with a hole for a 32 mm Ø button, self-adhe-
sive double-layer plastic labels, material thickness: 0.8 mm,
labeled according to customer specifications1)

1 sheet = 6 labels white EMLP 32 (38X14) CUS 0824371 1

1 sheet = 6 labels black EMLP 32 (38X14) BK CUS 0824372 1
1 sheet = 6 labels silver EMLP 32 (38X14) SR CUS 0824373 1

Accessories
Magazine, to hold 1 GPE label sheet

CMS-P1-M/GPE ENGRAVING 5145711 1

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 295

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Marking and labeling - MARKING system
Device marking
Marker carrier

For snap-in labels

Technical data
General data
Material PA
Inflammability class according to UL 94 V2
Temperature range [°C] -40 ... 105
Components free from silicone and halogen

Ordering data
– CARRIER-EMP ... marker carriers are
used in conjunction with UC-EMP ... / Description Color Type Order No.
Pcs. /
Pkt.
US-EMP ... snap-in labels
– They are used to clearly identify devices Marker carriers, for UC-EMP ... / US-EMP ... snap-in labels

and control cabinets Marker size: 17 x 15 mm black CARRIER-EMP (17X15) 0827450 80
– They can be assembled using screws or Marker size: 27 x 15 mm black CARRIER-EMP (27X15) 0827451 80
Marker size: 49 x 15 mm black CARRIER-EMP (49X15) 0827452 40
rivets Marker size: 60 x 15 mm black CARRIER-EMP (60X15) 0827453 40
Marker size: 60 x 30 mm black CARRIER-EMP (60X30) 0827454 30
Marker size: 85 x 54 mm black CARRIER-EMP (85,6X54) 0829365 10

Marker carriers, can be labeled using

snap-in markers for control devices

For buttons and switches 22 mm in diameter

Technical data
General data
Material PA
Inflammability class according to UL 94 V2
Temperature range [°C] -40 ... 105
Components free from silicone and halogen

Ordering data
– Snap-in UC-/US-EMP  labels are avail-
able for marking CARRIER-EMP 22 ... Description Color Type Order No.
Pcs. /
Pkt.
marker carriers
– Can be used for all buttons and switches Marker carriers, for UC-EM ... / US-EMP ... snap-in labels

with 22 mm diameter Marker size: 27 x 8 mm black CARRIER-EMP 22 (27X8) 0827445 50
Marker size: 27 x 12.5 mm black CARRIER-EMP 22 (27X12,5) 0827446 50
Marker size: 27 x 15 mm black CARRIER-EMP 22 (27X15) 0827447 50
Marker size: 27 x 18 mm black CARRIER-EMP 22 (27X18) 0827448 50
Marker size: 27 x 27 mm black CARRIER-EMP 22 (27X27) 0827449 50

296 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Marking and labeling - MARKING system
Device marking
Marker carriers, can be labeled using
control device labels

For buttons and switches 22 mm in diameter

Technical data
General data
Material PA
Inflammability class according to UL 94 V2
Temperature range [°C] -40 ... 105
Components free from silicone and halogen
Button diameter [mm] 22
– Can be used for all buttons and switches Ordering data
with a 22 mm diameter
– The large labeling areas provided by the Description Color Type Order No.
Pcs. /
Pkt.
CARRIER-EMLP can be custom-labeled
Marker carrier, for buttons and switches with 22 mm diameter, can
using EML ... thermal transfer labels be labeled with EML ... self-adhesive labels
– EMLPR ... transparent adhesive protective
Marker size: 27 x 8 mm black CARRIER-EMLP 22 (27X8) 0828984 50
foil can be used for additional protection Marker size: 27 x 12.5 mm black CARRIER-EMLP 22 (27X12,5) 0828985 50
of the label surfaces Marker size: 27 x 15 mm black CARRIER-EMLP 22 (27X15) 0828986 50
Marker size: 27 x 18 mm black CARRIER-EMLP 22 (27X18) 0828987 50
Marker size: 27 x 27 mm black CARRIER-EMLP 22 (27X27) 0828988 50

Transparent stick-on or snap-in cover

Shock protection

Ordering data

Pcs. /
Description Color Type Order No.
Pkt.
Shock protection foil, designed for sticking into CARRIER-
EMLP ...
51 labels per sheet transparent EMLPR (26,5X14,5) 0800546 10
– Stuck or snapped onto labeled CARRIER ... 42 labels per sheet transparent EMLPR (26,5X17,5) 0800360 10
30 labels per sheet transparent EMLPR (26,5X26,5) 0800361 10
to protect the labels Shock protection, designed for snapping into CARRIER-EMP ...
– Extremely thick, yet flexible and transpar-
ent shock protection transparent EMPPR (27X15) 0829535 50
transparent EMPPR (27X18) 0829536 50
– High level of mechanical and chemical
stability
– Suitable for permanent outdoor use

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 297

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Marking and labeling - MARKING system
Device marking
Marking profiles

– Self-adhesive marker carriers, available by

the meter for shortening as per individual
requirements
– Powerful adhesion and optimum grip on
standard device surfaces
– The P-SS-ZB 100 is particularly suitable
for accommodating SS-ZB, UC-EM (20X9),
UCT-EM (20X9)
– The P-ZB METER can accommodate
marking material for the tall and flat Designed to be stuck on
marker grooves found on Phoenix
Contact modular terminal blocks Technical data
General data
Material PVC
Inflammability class according to UL 94 V0
Temperature range [°C] -15 ... 80

Ordering data

Pcs. /
Description Color Type Order No.
Pkt.
Profile, self-adhesive, for accommodating SS-ZB labels,
UC-EM (20X9), UCT-EM (20X9), length: 1 m

gray P-SS-ZB 100 1013737 10

Profile, self-adhesive, designed to accommodate UC-TM ...,
UCT-TM ..., ZB ..., length: 1m
gray P-ZB METER 1051854 1

Marking profiles

Designed to be stuck on or for screwing/rivet-

ing
Technical data
General data
Material PVC
Inflammability class according to UL 94 V2
Temperature range [°C] -40 ... 105
Components free from silicone and halogen

Ordering data
– CARRIER-EMP ... marker carriers can be
custom-labeled with Description Color Type Order No.
Pcs. /
Pkt.
UC-EMP .../US-EMP ... and EMT ... de-
vice markers Profile, for screwing or riveting, 1000 mm long, for accommodating
UC-.../US-... and EMT ... material with a height of 15 mm
– For marking devices
– For marking assemblies gray CARRIER-EMP (1000X15) GY 0829366 25
transparent CARRIER-EMP (1000X15) TR 0829530 25
– For marking control and switchgear Profile, self-adhesive, 1000 mm long, for accommodating
UC-.../US-... and EMT ... material with a height of 15 mm

gray CARRIER/L-EMP (1000X15) GY 0829559 25

transparent CARRIER/L-EMP (1000X15) TR 0829560 25
CARRIER cover, 1000 mm long
transparent CARRIER-EMP (1000X15) COVER 0829520 25

298 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Marking and labeling - MARKING system
Device marking
Marker carrier

For insert strips

Technical data
General data
Material PVC
– Self-adhesive marker carriers for marking Inflammability class according to UL 94 V0
devices and components Temperature range [°C] -40 ... 60
Components Silicone-free
– Powerful adhesion and optimum grip on
standard device surfaces Ordering data
– These carrier materials can be fitted, e.g., Description Color Type Order No.
Pcs. /
with UC-WMT ..., US-WMT ..., EMT ..., Pkt.

and UCT-WMT Component marking label, self-adhesive, can be labeled with

UC-WMT ..., US-WMT ..., EMT ..., and UCT-WMT

Lettering field size: 15 x 4 mm transparent PAB-SK 15 1013287 500

Lettering field size: 30 x 4 mm transparent PAB-SK 30 1013290 200
UniCard, with insert strips for PATG and PATO marking collars

white UC-WMT (15X4) 0819398 10

yellow UC-WMT (15X4) YE 0819408 10
white UC-WMT (30X4) 0819437 10
yellow UC-WMT (30X4) YE 0819440 10
UniSheet, with insert strips for PATG and PATO marking collars

white US-WMT (15X4) 0828767 10

yellow US-WMT (15X4) YE 0828954 10
white US-WMT (30X4) 0828770 10
yellow US-WMT (30X4) YE 0828957 10
UniCard, with insert strips for PATG and PATO marking collars

white UCT-WMT (15X4) 0801446 10

yellow UCT-WMT (15X4) YE 0801447 10
white UCT-WMT (30X4) 0801422 10
yellow UCT-WMT (30X4) YE 0801423 10

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 299

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Marking and labeling - MARKING system
Device marking
Marker carriers with cover Can be printed with:

y
123
x
Plotter

For screw or rivet fixing

Technical data
General data
Can be printed with: CMS-P1-PLOTTER
– Control cabinet markers consisting of a Material PC
transparent cap and a base carrier Inflammability class according to UL 94 V2
Temperature range [°C] -40 ... 115
– The base carrier features two fixing holes Components free from silicone and halogen
so that it can be screwed on Drill hole spacing [mm] 40
Hole diameter [mm] 3.5
– Once labeled, the insert label is inserted
in the cap and this is then snapped onto Ordering data
the base carrier Pcs. /
Description Color Type Order No.
– The labeling is protected against external Pkt.
influences Control cabinet marker, two mounting holes M3
– The ES-SSMK ... insert strips can be la- Size: 60 x 18 mm, lettering field: 56 x 14 mm, transparent/ SSMK 60X18 5032439 50
beled using the CMS-P1-PLOTTER and incl. 1 x ES-SSMK-GB 60X18 white
the CMS-P1-PAD magazine Size: 96 x 30 mm, lettering field: 92 x 26 mm, transparent/ SSMK 96X30 5032442 50
incl. 1 x ES-SSMK-GB 90X30 white

Accessories
Large format sheet insert strips, can be labeled with plotter,
DIN A4, perforated, material: cardboard
1 sheet = 75 strips, labeling field: 56 x 14 mm transparent/ ES-SSMK-GB 60X18 5032468 10
white
1 sheet = 22 strips, labeling field: 92 x 26 mm transparent/ ES-SSMK-GB 96X30 5032455 10
white

300 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Marking and labeling - MARKING system
Device marking
Transparent stick-on cover

Shock protection

Technical data
General data
Material Polyester foil
– Extremely thick, but flexible and transpar- Components Halogen-free
ent label made from halogen-free PU Ordering data
– Stuck over labels or markers that have
Pcs. /
been labeled to protect them Description Color Type Order No.
Pkt.
– High level of mechanical and chemical sta- Shock protection foil, designed for sticking into CARRIER-
bility EMLP ...
– Suitable for permanent outdoor use 51 labels per sheet transparent EMLPR (26,5X14,5) 0800546 10
42 labels per sheet transparent EMLPR (26,5X17,5) 0800360 10
30 labels per sheet transparent EMLPR (26,5X26,5) 0800361 10
14 labels per sheet transparent EMLPR (30X40) 0800359 10
6 labels per sheet transparent EMLPR (80X42) 0800357 10
4 labels per sheet transparent EMLPR (80X60) 0800358 10
9 labels per sheet transparent EMLPR (100X30) 0800362 10

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 301

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Marking and labeling - MARKING system
Device marking

Device marking for

Phoenix Contact

ZB 5, ZB 6, ZB 15
UCT-EM (17,5X9)
UC-EM (17,5X9)

UC-EMP (20X9)

UCT-EM (20X9)
US-EMP (20X9)
UC-EM (20X9)
UCT-TMF 12
UC-TMF 12

UCT-TMF 6
UC-TMF 6
UCT-TM 6
UC-TM 6
Catalog 7: interface technology and switchgear
INTERFACE Relay PLC power terminal block Order No. 2966508
INTERFACE Relay PLC-B..., PLC-O..., PLC-R...
DEK-REL… relay terminal block
DEK-OE… special relays
DEK-TR… inverter module
COMPACT-LINE UM 45...
PROCESS INTERFACE PI-EX...
RIFLINE complete

UCT-EM (17,5X9)
UC-WMT (23X4)
US-WMT (23X4)

UC-EM (17,5X9)

UC-EMP (20X9)

UCT-EM (20X7)

UCT-EM (20X9)
US-EMP (20X9)
UC-EM (20X7)
UCT-TMF 10

UCT-TMF 16
UC1U-TM 5

UC-TMF 10

UC-TMF 16
UCT-TMF 8
UC-TMF 8
UCT-TM 5

UCT-TM 6
UC-TM 5

UC-TM 6

Catalog 4: sensor/actuator cabling and industrial plug-in connectors

SACB with M8 slots
SACB with M12 slots
SACB with M5 slots

SACB-SPEEDCON distributor boxes with M12 slots and metal threads

SACB-SPEEDCON distributor boxes with M12 slots and plug-in screw

connection
Distributor boxes with QUICKON slots
Sensor/actuator cabling accessories
PSR-SACB sensor box with M12 slots
VS-SCRJ…, VS-IL-2X… data plug-in connectors
ASI CC DIST… AS-Interface distributor
VS-SI... front plate
HC-M… modular contact insert
HEAVYCON HC-B...A... heavy-duty plug-in connectors
HEAVYCON HC-D...A... heavy-duty plug-in connectors

302 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Marking and labeling - MARKING system
Device marking

UCT-TMF 18
UC-TMF 18

UCT-TMF 5
UC-TMF 5
UCT-TM 6
UC-TM 6
Catalog 6: surge protection and power supply units
FLASHTRAB compact PLUS lightning arrester
FLASHTRAB PLUS lightning arrester
FLASHTRAB compact lightning arrester
VALVETRAB compact surge arrester
VALVETRAB MS surge arrester
MAINS-PLUGTRAB device protection
PLUGTRAB with function monitoring PT-IQ
PLUGTRAB PT… plug-in surge protection cascade
Modular terminal blocks with TT... surge protection elements

UCT-EM (7X10)

EMT (35X18,7)

EMT (35X28)

EMT (35X46)
UCT-TMF 12
UC-TMF 12

UCT-TMF 6

UCT-TMF 8
UC-TMF 6

UC-TMF 8
UCT-TM 6
UC-TM 6

Catalog 8: control technology, I/O systems, automation infrastructure

Inline
INTERBUS ST...
Fieldline... M8
Fieldline... M12
Axioline F series
Axioline E series

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 303

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Marking and labeling - MARKING system
Device marking

Device marking for devices from

other manufacturers

UCT-EM (17,5X7,5)
UC-EM (17,5X7,5)

UCT-EM (17,5X8)
UC-EM (17,5X8)

UCT-EM (17X9)

UCT-EM (17X8)

UCT-EM (20X9)
ABB
Miniature circuit breaker S 221..., S 223..., S 281..., S 284...
Residual current device F271..., F172...
Switch, button, indicator light E 221…, E 222…, E 223…
Switch, button, indicator light E 225…, E 226…, E 227…
Power dimmer STD…
Power supply unit NTLS…
Power consumption meter RS 232…
Installation contactors ESB…, EN…

Miniature circuit breakers LE1..., LE3..., LP1-3..., LPUC 1/2, LP1NA..., LP3NA...

Residual current devices F…, FIP…, FIK…, FI-LP…, FIS…

FI signal generator FISG…
Load switch IS…
Surge arrester SA 4…
Logic modules
Logic and extension module LM…, DO…, DX…
Miniature circuit breaker
Switch contacts A9, A12, A16, A26, A30, A40, A50, A63, A75, A95, A110, A145, A185, A210,
A260, A300, AF400, AF460, AF580, AF750
Mini contacts B6, B7
SZ-KZS
UCT-EM (17X10)

Allen-Bradley
100-C09Z*10, 100-F A22, 100-F A40
Motor starter 140M x

304 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Marking and labeling - MARKING system
Device marking

UCT-EM (10X5)

UCT-EM (12X7)

UCT1-TMF 5
UC1-TMF 5
Beckhoff
BK 3010, BK 3110
BC 2000, BC 3100, BC 4000
BC 9000, BC 9050
Field distributor IE 3112-2-00
IL 2301-B310
SAI distributor (sensor/actuator interface)

UCT-EM (12X3,3)

UCT-EM (12X6)
Bernecke + Rainer
X20 system
UCT-EM (10X8)

Bosch/Rexroth
Bosch/distributor

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 305

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Marking and labeling - MARKING system
Device marking

Device marking for devices from

other manufacturers

UCT-EM (5X10)

UCT-EM (6X10)

UCT-EM (20X9)
UC-EM (20X9)
CONTA-CLIP
PRSU
CP V4, optocoupler, AOP
PGSV, PSP

UCT-EM (10X5)

UCT-EM (20X8)

UCT-EM (20X9)
UC-EM (20X9)
ESCHA
Distributor block MB
Distributor block FK/FKS
M12 distributor
Distributor block 8MB

UCT-EM (17X10)
UCT-EM (6X10)

UCT-EM (17X9)

UCT-EM (20X9)
UC-EM (20X9)

FESTO
Compact Performance
CPA10/EV1
CP-E16 valve island
CP-E16-KL-CL
Electronics CP-16-M
IBS 6x10
MPV-E/A08-M8, MPV-E/A08-M12, MPV-E/A12-M8
CPV pneumatics
IBS 9/17
IBS 10/17
MT
Valve island IBS 9/20
CPV18-V1 valves

306 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Marking and labeling - MARKING system
Device marking

UCT-EM (6X10)

UCT-EM (17X9)
Finder
Variclip (relay retaining bracket)
Variclip 020.24
Sockets with screw and spring-cage terminal block, 93 series

UCT-EM (20X7)

UCT-EM (20X9)
UC-EM (20X7)

UC-EM (20X9)

UCT-TM 6

UCT-TM 5
UC-TM 6

UC-TM 5
HARTING
Front plate Han - Port
Plug-in connector Han - Snap
Connection distributor Han - E AV
Connection distributor Han - D AV UCT-EM (17,5X8)
UC-EM (17,5X8)

UCT-EM (10X8)

UCT-EM (17X8)

UCT-EM (18X8)

UCT-EM (20X7)

UCT-EM (20X9)

UCT-EM (21X8)
UC-EM (10X8)

UC-EM (20X7)

UC-EM (21X8)

ifm-electronic
AC 20 xx classic module/universal M
AC 24 80/81 CompactLine
AC 5210 AS-i module
AV 52xx ClassicLine
AC 225 SmartLine
ClassicLine distribution module AC52…
Active AS-i module AC2480
AC 50 xx module bases
Active AS-i module AC225...
Compact module AC 24 xx

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 307

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Marking and labeling - MARKING system
Device marking

Device marking for devices from

other manufacturers

UCT-EM (17,5X7,5)
UC-EM (17,5X7,5)

UCT-EM (10X5)

UCT-EM (10X8)

UCT-EM (20X9)
UC-EM (10X8)

UC-EM (19X9)

UC-EM (20X9)
Lumberg
INTERBUS remote bus terminal block
PROFIBUS DP...
CANopen® device CSL...
DeviceNet™ device DSL...
AS-Interface module
Ethernet switch EEC...
Sensor/actuator distributor ASB
Valve adapter VAD...
Valve adapter VBD...
I/O module UEM...
PROFIBUS DP PSL 7...
AS-Interface module ASL 501
AS-Interface ABAS/UTAS
Terminal strip SBS4/LED-3
Distributors E2C and SB8
AS-Interface IBA, IBI, IBP
ASB 2-VC-1A, ASB 8
ASBM 12/LED 3, ASBSM 4/LED 3
PROFIBUS 0970-PSL-651 UCT-EM (17,5X8)
UC-EM (17,5X8)

UCT-EM (20X9)
UC-EM (20X9)

Moeller
Function relay DILET 11…, DILET 70…, EMR 4…
Basic device and extension module EASY 2..., EASY 5..., EASY 6..., EASY 7...,
EASY 200...
Relay ZE..., ZEV...
Contactor DILER, DILEM

308 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Marking and labeling - MARKING system
Device marking

UCT-EM (17,5X8)

UCT-EM (17,5X9)
UC-EM (17,5X9)

UCT-EM (5X10)

UCT-EM (10X5)

UCT-EM (17X9)

UCT-EM (17X8)

UCT-EM (20X8)

UCT-EM (20X9)

UCT-EM (21X8)
UC-EM (20X9)

UC-EM (21X8)
MURR ELEKTRONIK
ASI IO SL DIO 8/4/4
M8 distributors
MSUD valve connector combination
AS-i bus module MVK8
MVPS8 sensor/actuator box
B6 mini contact
Initiator holder
M12 Y cable
Plastic M12 distributor systems
MERINO
Merio M12 8-way distributor 27106
MVK12 AS-i bus module
MVM8 Order No. 276658
MVP 12 distributor: 4-way 27114
MVP 12 distributor: 6-way 27115
MVP 12 distributor: 8-way 27116
MVP 12 AS-i module distributor 27773 to 27778
Cube 67
MASI
MICO 4.6

MVP 12 distributor: 4-way 27530, MVP 12 distributor: 8-way 27535

MVK MP DI 08, DI 8 PROFIBUS

AMMS/AMMDS
AMZS/AMZSW, Order No. 276397
AS/S01/DIL/RC-BUG2

Cube 67 BN-P, KM 5, Logic distributor 8-way M12, Order No. 276247

M12 distributor, MAW/MDW, MBM bus modules IP20, MBV series

MIS system wiring, MKS/MKSxxx, MPOT, MSUD valve connection tech-

nology
MSVD/MSDO, MSVS, MUFW/MF...W/MIB
MVK-I bus module Order No. ME 553300
NEF mains interference filter, RMM/RMME, UFL/UG-
SB/UGS/SV/LUGS/PKB
Valve connector type A, B, BI, C, CI, distributor MVB 8V

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 309

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Marking and labeling - MARKING system
Device marking

Device marking for devices from

other manufacturers

UCT-EM (10X5)

UCT-EM (10X8)

UCT-EM (20X9)
UC-EM (20X9)
Pepperl & Fuchs
G6 compact modules
ASI VAA-2E-64SN (pneumatic module VAA)
AS-i bus module, G6 compact module, IPG-64-B7
VAS 2A-K 12 U, WA-4E-62-ZE

UCT-EM (17X8)

UCT-EM (18X8)

UCT-EM (21X8)
UC-EM (18X8)

UC-EM (21X8)

Schneider Electric
Standard contactors GC 1610, 1611, 1620, 2502, 2510, 2511,
2520
Preselection contactors GY 1611, 1620, 2511, 2520
TeSys D series, D control relay, K, K control relay
TeSys model U

Standard contactors GC 1622, 1630, 1640, 2504, 2522, 2530,

2540

Standard contactors 4002, 4004, 4011, 4020, 4022, 4030, 4040,

6302, 6304, 6311, 6320, 6322, 6330, 6340, 10020, 10040

Preselection contactors GY 1640, 2530, 2540, 4020, 4030,

4040, 6320, 6330, 6340
Motor adjustment combination TeSys LD1...
Motor adjustment combination HL contactors LD 4...
Motor output/reversing combination LD5...

310 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Marking and labeling - MARKING system
Device marking

EMT (50/28X13)R...

EMT (103X17)R...

EMT (103X23)R...

UCT-EM (15X10)
EMT (50X26)R...

UCT-EM (10X7)

UCT-EM (10X8)

UCT-EM (20X7)

UCT-EM (20X9)
UC-EM (10X7)

UC-EM (10X8)

UC-EM (20X7)

UC-EM (20X9)
Siemens
AS-i slaves I/O module K45…/K60…

ASIsafe module K45.../K60..., mounting plate K45/K60

AS-i slaves SlimLine S22.5.../S45...

AS-i slaves counter module, ground fault detection module

AS-i slaves surge protection module

AS-i repeater, 4-way distributor, round cable distributor

AS-i compact module K20...

Contactor, auxiliary contactor, contactor combination, auxil-

iary switch block

Auxiliary switch blocks 3RH 1921...

EMI interference suppression module
Solid-state relay, solid-state contactor, special function module

Circuit breaker, el. overload relay, therm. overload relay

Soft starter, direct starter

Motor management and control devices, timer relays, moni-
toring relays, safety relays
ET 200S
S7-300
ET 200SP

Bus module ET 200X, contact block, Signum button series,

3SB3 button, switching element 3SB14...

Motor circuit breaker

End block 8WA1 808

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 311

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Marking and labeling - MARKING system
Device marking

Device marking for devices from

other manufacturers

UCT-EM (18X8)

UCT-EM (21X8)
UC-EM (18X8)

UC-EM (21X8)
Telemecanique
Standard contactor GC 1610, 1611, 1620, 2502
Standard contactor GC 1622, 1630, 1640, 2504
Standard contactor GC 2510, 2511, 2520
Standard contactor GC 2522, 2530, 2540
Standard contactor GC 4002, 4004, 4011, 4020, 4022, 4030, 4040
Standard contactor GC 6302, 6304, 6311, 6320, 6322, 6330, 6340
Standard contactor GC 10020, 10040
Preselection contactor GY 1611, 1620
Preselection contactor GY 1640
Preselection contactor GY 2511, 2520
Preselection contactor GY 2530, 2540
Preselection contactor GY 4020, 4030, 4040
Preselection contactor GY 6320, 6330, 6340
Motor output combination TeSys LD1…
Motor output combination HL contactors LD4…
Motor output combination/reversing combination LD5…

312 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Marking and labeling - MARKING system
Device marking

UCT-EM (10X5)

UCT-EM (20X8)

UCT-EM (20X9)
UC-EM (20X9)
Turck

PLC distributor SDPB-0404D-006, SDPL-0404D-1003, SAI distributor

JTBS-46SC
8MB12-xxx, FLDP-IM-8, PDP-M81 / I16T

UCT-EM (12X7)

UCT-EM (17X9)
Wago
Miniature circuit breaker
I/O modules

UCT-EM (17,5X9)
UC-EM (17,5X9)

UCT-EM (20X9)
UC-EM (19X9)

UC-EM (20X9)
UCT1-TMF 5

UCT1-TM 5
UC1-TMF 5

UC1-TM 5

Weidmüller
M8 distributor systems
M5 distributor systems
Actuator/sensor interface
Actuator/sensor interface line
M12 distributor systems
M12 metal distributor systems
SAI distributor

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 313

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Marking and labeling - MARKING system
Device marking

Marker carriers from

Phoenix Contact

EML (26,5X26,5)R SR
EMLP (27X12,5)R SR

EML (26,5X17,5)R ...

EML (26,5X7,5)R SR

US-EMLP (27X12,5)
EML (26,5X12)R SR

EMLP (27X18)R SR

EMLP (27X27)R SR
UC-EMP (27X12,5)
US-EMP (27X12,5)

US-EMLP (27X15)

US-EMLP (27X18)

US-EMLP (27X27)
EMLP (27X8)R SR

UC-EMP (27X15)

UC-EMP (27X18)

UC-EMP (27X27)
US-EMLP (27X8)

US-EMP (27X15)

US-EMP (27X18)

US-EMP (27X27)
UC-EMP (27X8)
US-EMP (27X8)
Phoenix Contact
CARRIER-EMP 22 (27 x 8)
CARRIER-EMP 22 (27 x 12,5)
CARRIER-EMP 22 (27 x 15)
CARRIER-EMP 22 (27 x 18)
CARRIER-EMP 22 (27 x 27)
CARRIER-EMLP 22 (27 x 8)
CARRIER-EMLP 22 (27 x 12,5)
CARRIER-EMLP 22 (27 x 15)
CARRIER-EMLP 22 (27 x 18)
CARRIER-EMLP 22 (27 x 27)

US-EMP (85,6X54)
UC-EMP (17X15)

UC-EMP (27X15)

UC-EMP (49X15)

UC-EMP (60X15)

UC-EMP (60X30)
US-EMP (17X15)

US-EMP (27X15)

US-EMP (49X15)

US-EMP (60X15)

US-EMP (60X30)

Phoenix Contact
CARRIER-EMP (17 x 15)
CARRIER-EMP (27 x 15)
CARRIER-EMP (49 x 15)
CARRIER-EMP (60 x 15)
CARRIER-EMP (60 x 30)
CARRIER-EMP (85,6 x 54)
CARRIER-EMP (1000 x 15)
CARRIER-EMP (1000 x 15) TR
CARRIER/L-EMP (1000 x 15)
CARRIER/L-EMP (1000 x 15) TR

314 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Marking and labeling - MARKING system
Device marking

Marker carriers from

other manufacturers

UC-EMP (27X12,5)
US-EMP (27X12,5)
UC-EMLP (22X22)
UC-EMP (17X15)

UC-EMP (27X15)

UC-EMP (27X18)

UC-EMP (27X27)

UC-EMP (49X15)

UC-EMP (60X15)

UC-EMP (60X30)
US-EMP (17X15)

US-EMP (27X15)

US-EMP (27X18)

US-EMP (27X27)

US-EMP (49X15)

US-EMP (60X15)

US-EMP (60X30)
UC-EMP (27X8)
US-EMP (27X8)
ABB
MA6-1060
BSH-A
BSH-B
Conta-Clip
GSU-H 17 x 15
GSU-H 27 x 15
GSU-H 49 x 15
GSU-H 60 x 15
GSU-H 60 x 30
Grafoplast
SIT 0A06...
SIT 0A07...
SIT 0B05...
SIT 0B07...
SIT 0B08...
SIT 0B09...
Moeller
M22S-ST-X
Murrplastik
BT 22,5
BTK 22.5
BT Harmony ZB4
BT 15/27
BT 15/49
Siemens
3SB3922-0AY
3SB3925-0AV
3SB1906-2AA
3SB1906-2AW
Empty housing 3SB38...
Weidmüller
SM-H 27/12,5
SM-H 27/18
SM-H 27/27
CC-H 15/17
CC-H 15/27
CC-H 15/49
CC-H 30/60

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 315

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
316 PHOENIX CONTACT
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
System marking - MARKING system

Clear and extensive marking of systems    

Product range overview  
not only guarantees safety but is also a legal
requirement. Safety and information signs    
System marking 318
provide important information and help to
improve operational processes.    
Phoenix Contact offers numerous mark- PML-W... warning labels  
ing labels for system marking. From warning   Unlabeled warning labels, UniSheet material 320 
labels to multicolored symbol signs, the   Unlabeled warning labels, supplied in rolls 321 
extremely diverse product range covers all
applications. We offer a range of printing   Preprinted warning labels 322 
systems for labeling.    
PML-P... prohibition signs  
  Unlabeled prohibition signs, UniSheet material 326 
  Unlabeled prohibition signs, supplied in rolls 327 
  Preprinted prohibition signs 328 
   
PML-M... mandatory signs  
  Unlabeled mandatory signs, UniSheet material 334 
  Unlabeled mandatory signs, supplied in rolls 335 
  Preprinted mandatory signs 336 
   
PML-T... pipeline signs  
  Unlabeled pipeline signs, supplied in rolls 342 
   
PML-GHS... hazardous substances labels  
  Unlabeled hazardous substances labels, UniSheet material 348 
  Unlabeled hazardous substances labels, supplied in rolls 349 
  Preprinted hazardous substances labels 350 
   
US-EMLF... combi labels  
  Unlabeled combi labels, UniSheet material 354 
   
PMM... magnetic labels  
  Unlabeled magnetic labels, supplied in rolls 356 
   
Ordering example for labeling service - printed for you 359

PHOENIX CONTACT 317

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Marking and labeling - MARKING system
System marking

Unambiguous marking of systems helps to Phoenix Contact offers a wide range of la- Please contact us if you are unable to find
avoid operating errors and is therefore a key bels which meet the legal requirements for a suitable size or color for your application
component of occupational safety. Informa- correct system marking. Depending on the from the options available in our product
tion and safety signs also provide important type, they can be labeled using the range. It goes without saying that Phoenix
information on site, making it easier to THERMOMARK LINE thermal transfer Contact also offers a comprehensive label-
maintain systems. printers. The labels are characterized by a ing service for system marking applications.
high level of wipe and scratch resistance. Test us out!
Multicolored symbol signs can be custom-
designed using the THERMOMARK CARD PLUS.

318 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Marking and labeling - MARKING system
System marking

PML-W warning labels PML-P prohibition signs PML-M mandatory signs

Warning labels are used to identify danger Prohibition signs prohibit potentially dan- Mandatory signs prescribe a certain mode
areas in systems and workshops. The unla- gerous activities. They are therefore a key of behavior and are used to prevent acci-
beled warning labels allow you to create component of occupational health and dents in the workplace.
custom warning instructions. safety.

PML-T pipeline signs PML-GHS hazardous substances la- PMM magnetic labels
Pipeline markers are used to indicate flu- bels Magnetic labels provide a flexible solution
ids or gases. By removing the arrowhead Hazardous substances labels are used for if you do not wish to apply permanent
that is not required, the direction of flow the additional marking of the pipeline mark- marking. If required, they can be quickly
can also be defined. ers if hazardous substances according to the attached to metallic surfaces and removed
Ordinance on Hazardous Substances just as easily.
(GefStoffV) are transported through the
pipelines.

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 319

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Marking and labeling - MARKING system
System marking
UniSheet - stick-on warning labels, Can be printed with:
unlabeled
P R I NT E D
F OR YOU

1
2
1
2
Thermal transfer for sheets
and cards

Unlabeled or labeled according to customer

specifications

Technical data
General data
Can be printed with: THERMOMARK CARD PLUS  THERMOMARK CARD
The unlabeled US-PML warning labels Material PVC
allow you to create custom warning Temperature range [°C] -40 ... 90
Wipe resistance DIN EN 61010-1 (VDE 0411-1)
instructions. A variety of symbols are avail- Components Silicone-free
able in the CLIP PROJECT software. The Ordering data
warning labels offer the following features:
– Highly flexible, plasticized PVC labels Description Color Type Order No.
Pcs. /
Pkt.
which are ideal for uneven surfaces
UniSheet, with self-adhesive warning labels, triangular
– Suitable for indoor and outdoor use
– The warning labels conform to the 24-section, side length: 25 mm yellow US-PML-W100 (25X25) 1014125 10
6-section, side length: 50 mm yellow US-PML-W100 (50X50) 1014126 10
ISO 7010 international standard 1-section, side length: 100 mm yellow US-PML-W100 (100X100) 1014127 10
– The format automatically ensures printing UniSheet, with self-adhesive warning labels,
with a high degree of positioning accuracy triangular with additional rectangular lettering field

16-section, side length: 25 mm yellow US-PML-W200 (25X25) 1014131 10

– Labeling service: Phoenix Contact 4-section, side length: 50 mm yellow US-PML-W200 (50X50) 1014132 10
1-section, side length: 100 mm yellow US-PML-W200 (100X100) 1014133 10
can custom-label all US-PML ... warning la- UniSheet, with self-adhesive warning labels, triangular,
bels according to your requirements labeled according to customer specifications1)
24-section, side length: 25 mm yellow US-PML-W100 (25X25) CUS 1014128 1
Notes: 6-section, side length: 50 mm yellow US-PML-W100 (50X50) CUS 1014129 1
1) 1-section, side length: 100 mm yellow US-PML-W100 (100X100) CUS 1014130 1
For ordering example, see page 359.
UniSheet, with self-adhesive warning labels, triangular with
additional rectangular lettering field,
labeled according to customer specifications1)

16-section, side length: 25 mm yellow US-PML-W200 (25X25) CUS 1014134 1

4-section, side length: 50 mm yellow US-PML-W200 (50X50) CUS 1014135 1
1-section, side length: 100 mm yellow US-PML-W200 (100X100) CUS 1014136 1

Accessories
Magazine, for THERMOMARK CARD...,
for accommodating all US-... materials
THERMOMARK CARD-US-MAG1 5146451 1

320 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Marking and labeling - MARKING system
System marking
Stick-on warning labels, unlabeled Can be printed with:
P R I NT E D
F OR YOU

2
11
2
Thermal transfer for rolls

Unlabeled or labeled according to customer

specifications

Technical data
General data
Can be printed with: THERMOMARK ROLL  THERMOMARK ROLL X1  THERMO-
The unlabeled PML warning labels allow MARK X1.1  THERMOMARK X1.2
Material PVC
you to create custom warning instructions. Temperature range [°C] -40 ... 90
A variety of symbols are available in the Wipe resistance DIN EN 61010-1 (VDE 0411-1)
CLIP PROJECT software. The warning la- Components Silicone-free

bels offer the following features: Ordering data

– Highly flexible, plasticized PVC labels
Pcs. /
which are ideal for uneven surfaces Description Color Type Order No.
Pkt.
– Suitable for indoor and outdoor use Warning label, triangular
– The special packaging protects rolls that 500 labels per roll, side length: 25 mm yellow PML-W100 (25X25)R 0830429 1
have already been started from the dirt 500 labels per roll, side length: 50 mm yellow PML-W100 (50X50)R 0830430 1
found in industrial environments
250 labels per roll, side length: 100 mm yellow PML-W100 (100X100)R 0830431 1
– The warning labels conform to the
ISO 7010 international standard Warning label, triangular, additional rectangular lettering field
– Labeling service: Phoenix Contact can 500 labels per roll, side length: 25 mm yellow PML-W200 (25X25)R 0830451 1
custom-label all PML ... warning labels
according to your requirements 500 labels per roll, side length: 50 mm yellow PML-W200 (50X50)R 0830452 1

250 labels per roll, side length: 100 mm yellow PML-W200 (100X100)R 0830453 1
Notes:
1) For ordering example, see page 359. Warning label, rectangular
500 labels per roll, width: 52 mm, height: 26 mm yellow PML-W300 (52X26)R 0830458 1

500 labels per roll, width: 74 mm, height: 37 mm yellow PML-W300 (74X37)R 0830459 1

250 labels per roll, width: 105 mm, height: 52 mm yellow PML-W300 (105X52)R 0830460 1

Warning label, triangular,

labeled according to customer specifications1)
3 labels per strip, side length: 25 mm yellow PML-W100 (25X25)R CUS 0830493 1

1 label per strip, side length: 50 mm yellow PML-W100 (50X50)R CUS 0830494 1

1 label per strip, side length: 100 mm yellow PML-W100 (100X100)R CUS 0830495 1

Warning label, triangular, additional rectangular lettering field,

labeled according to customer specifications1)
3 labels per strip, side length: 25 mm yellow PML-W200 (25X25)R CUS 0830496 1

1 label per strip, side length: 50 mm yellow PML-W200 (50X50)R CUS 0830497 1

1 label per strip, side length: 100 mm yellow PML-W200 (100X100)R CUS 0830498 1

Warning label, rectangular,

labeled according to customer specifications1)
1 label per strip, width: 52 mm, height: 26 mm yellow PML-W300 (52X26)R CUS 0830499 1

1 label per strip, width: 74 mm, height: 37 mm yellow PML-W300 (74X37)R CUS 0830500 1

1 label per strip, width: 105 mm, height: 52 mm yellow PML-W300 (105X52)R CUS 0830501 1

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 321

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Marking and labeling - MARKING system
System marking
Stick-on warning labels, triangular
with lightning flash

Technical data
General data
Material PVC
The PML warning labels are available with Temperature range [°C] -40 ... 90
various warning instructions. The warning Wipe resistance DIN EN 61010-1 (VDE 0411-1)
Components Silicone-free
labels offer the following features:
– Printed cards Ordering data
– Suitable for indoor and outdoor use Description Color Type Order No.
Pcs. /
– The warning labels conform to the Pkt.

ISO 7010 international standard Warning label, triangular, with lightning flash

25 labels per sheet, side length: 25 mm yellow PML-W101 (25X25) 0830433 5

9 labels per sheet, side length: 50 mm yellow PML-W101 (50X50) 0830434 5

9 labels per sheet, side length: 100 mm yellow PML-W101 (100X100) 0830435 5

1 label per sheet, side length: 200 mm yellow PML-W101 (200X200) 0830436 5

322 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Marking and labeling - MARKING system
System marking
Stick-on warning labels, triangular
with lightning flash and
details of voltage
– Printed cards
– Suitable for indoor and outdoor use
– The warning labels conform to the
ISO 7010 international standard

Technical data Technical data

General data
Material PVC PVC
Temperature range [°C] -40 ... 90 -40 ... 90
Wipe resistance DIN EN 61010-1 (VDE 0411-1) DIN EN 61010-1 (VDE 0411-1)
Components Silicone-free Silicone-free

Ordering data Ordering data

Pcs. / Pcs. /
Description Color Type Order No. Type Order No.
Pkt. Pkt.
Warning label, triangular with lightning flash, additional rectangu-
lar lettering field, printed text: “Spannung Voltage”

16 labels per sheet, side length: 25 mm yellow PML-W201 (25X25) 0830454 5

4 labels per sheet, side length: 50 mm yellow PML-W201 (50X50) 0830455 5

4 labels per sheet, side length: 100 mm yellow PML-W201 (100X100) 0830456 5

1 label per sheet, side length: 200 mm yellow PML-W201 (200X200) 0830457 5

Warning label, triangular, with lightning flash, additional rectangu-

lar lettering field, printed text: 230 V

16 labels per sheet, side length: 25 mm yellow PML-W202 (25X25) 0830437 5

4 labels per sheet, side length: 50 mm yellow PML-W202 (50X50) 0830438 5

4 labels per sheet, side length: 100 mm yellow PML-W202 (100X100) 0830439 5

1 label per sheet, side length: 200 mm yellow PML-W202 (200X200) 0830440 5

Warning label, triangular, additional rectangular lettering field,

printed items: lightning flash and 400 V

16 labels per sheet, side length: 25 mm yellow PML-W203 (25X25) 0830441 5

4 labels per sheet, side length: 50 mm yellow PML-W203 (50X50) 0830442 5

4 labels per sheet, side length: 100 mm yellow PML-W203 (100X100) 0830443 5

1 label per sheet, side length: 200 mm yellow PML-W203 (200X200) 0830444 5

Warning label, triangular, additional rectangular lettering field,

printed items: lightning flash and 120 V

4 labels per sheet, side length: 50 mm yellow PML-W204 (50X50) 0830445 5

4 labels per sheet, side length: 100 mm yellow PML-W204 (100X100) 0830446 5

1 label per sheet, side length: 200 mm yellow PML-W204 (200X200) 0830447 5

Warning label, triangular, additional rectangular lettering field,

printed items: lightning flash and 240 V

4 labels per sheet, side length: 50 mm yellow PML-W205 (50X50) 0830448 5

4 labels per sheet, side length: 100 mm yellow PML-W205 (100X100) 0830449 5

1 label per sheet, side length: 200 mm yellow PML-W205 (200X200) 0830450 5

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 323

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Marking and labeling - MARKING system
System marking
Stick-on warning labels, with lightning
flash and warning instruction

– Printed cards
– Suitable for indoor and outdoor use

Technical data
General data
Material PVC
Temperature range [°C] -40 ... 90
Wipe resistance DIN EN 61010-1 (VDE 0411-1)
Components Silicone-free

Ordering data

Pcs. /
Description Color Type Order No.
Pkt.
Warning label, rectangular, with lightning flash, printed text in
German/English: “Danger! High voltage when main switch is off”

4 labels per sheet, W x H: 52 x 26 mm yellow PML-W301 (52X26) 0830461 5

3 labels per sheet, W x H: 74 x 37 mm yellow PML-W301 (74X37) 0830462 5

4 labels per sheet, W x H: 105 x 52 mm yellow PML-W301 (105X52) 0830463 5

2 labels per sheet, W x H: 200 x 100 mm yellow PML-W301 (200X100) 0830464 5

Warning label, rectangular, printed text in German:

“Achtung! Vor Öffnen des Gehäuses Netzstecker ziehen!”

27 labels per sheet, W x H: 52 x 26 mm yellow

12 labels per sheet, W x H: 74 x 37 mm yellow

4 labels per sheet, W x H: 105 x 52 mm yellow

2 labels per sheet, W x H: 200 x 100 mm yellow

Warning label, rectangular, with lightning flash, printed text in

English: “Caution! Before opening housing, turn off main power
switch!”
27 labels per sheet, W x H: 52 x 26 mm yellow

12 labels per sheet, W x H: 74 x 37 mm yellow

4 labels per sheet, W x H: 105 x 52 mm yellow

2 labels per sheet, W x H: 200 x 100 mm yellow

Warning label, rectangular, printed text in German:

“Achtung! Vor Öffnen des Gehäuses Hauptschalter ausschalten!”

27 labels per sheet, W x H: 52 x 26 mm yellow

12 labels per sheet, W x H: 74 x 37 mm yellow

4 labels per sheet, W x H: 105 x 52 mm yellow

2 labels per sheet, W x H: 200 x 100 mm yellow

Warning label, rectangular, with lightning flash, printed text in

English: “Caution! Before opening housing, pull main plug!”

27 labels per sheet, W x H: 52 x 26 mm yellow

12 labels per sheet, W x H: 74 x 37 mm yellow

4 labels per sheet, W x H: 105 x 52 mm yellow

2 labels per sheet, W x H: 200 x 100 mm yellow

324 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Marking and labeling - MARKING system
System marking

Technical data

PVC
-40 ... 90
DIN EN 61010-1 (VDE 0411-1)
Silicone-free

Ordering data

Pcs. /
Type Order No.
Pkt.

PML-W302 (52X26) 0830465 5

PML-W302 (74X37) 0830466 5

PML-W302 (105X52) 0830467 5

PML-W302 (200X100) 0830468 5

PML-W303 (52X26) 0830469 5

PML-W303 (74X37) 0830470 5

PML-W303 (105X52) 0830471 5

PML-W303 (200X100) 0830472 5

PML-W304 (52X26) 0830473 5

PML-W304 (74X37) 0830474 5

PML-W304 (105X52) 0830475 5

PML-W304 (200X100) 0830476 5

PML-W305 (52X26) 0830477 5

PML-W305 (74X37) 0830478 5

PML-W305 (105X52) 0830479 5

PML-W305 (200X100) 0830480 5

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 325

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Marking and labeling - MARKING system
System marking
UniSheet - stick-on prohibition signs, Notes:
color preprinted without symbols For accessories, visit www.phoenixcontact.net/products.
P R I NT E D
1) For ordering example, see page 359. F OR YOU

Unlabeled or labeled according to customer

specifications
Technical data
General data
Can be printed with: THERMOMARK CARD PLUS  THERMOMARK CARD
Material PVC
Temperature range [°C] -40 ... 90
Wipe resistance DIN EN 61010-1 (VDE 0411-1)
Components Silicone-free
– The color preprinted US PML-P prohibi- Ordering data
tion signs on US cards allow you to create
custom prohibition notices Description Color Type Order No.
Pcs. /
Pkt.
– A variety of symbols are available in the
Prohibition sign, color preprinted, without symbols
CLIP PROJECT software
4-section, diameter: 50 mm red/white US-PML-P100 (D50) 1014217 10
1-section, diameter: 100 mm red/white US-PML-P100 (D100) 1014218 10
Prohibition sign, color preprinted, without symbols, labeled
according to customer specifications1)

4-section, diameter: 50 mm red/white US-PML-P100 (D50) CUS 1014219 1

1-section, diameter: 100 mm red/white US-PML-P100 (D100) CUS 1014220 1

UniSheet - stick-on prohibition sign, Notes:

unprinted For the matching ink ribbon (1014403) and magazine (5146451),
P R I NT E D
for THERMOMARK CARD, for accommodating all US materials,
see page 348. F OR YOU
1) For ordering example, see page 359.

Unlabeled or labeled according to customer

specifications
Technical data
General data
Can be printed with: THERMOMARK CARD PLUS
Material PVC
Temperature range [°C] -40 ... 90
Wipe resistance DIN EN 61010-1 (VDE 0411-1)
Components Silicone-free
– The unlabeled PML prohibition signs Ordering data
allow you to create custom prohibition
notices in color with the Description Color Type Order No.
Pcs. /
Pkt.
THERMOMARK CARD PLUS
Prohibition sign, unprinted
– A variety of symbols are available in the 4-section, diameter: 50 mm white US-PML-P200 (D50) 1014221 10
CLIP PROJECT software 1-section, diameter: 100 mm white US-PML-P200 (D100) 1014222 10
Prohibition sign, unprinted,
labeled according to customer specifications1)
4-section, diameter: 50 mm white US-PML-P200 (D50) CUS 1014223 1
1-section, diameter: 100 mm white US-PML-P200 (D100) CUS 1014224 1

326 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Marking and labeling - MARKING system
System marking
Stick-on prohibition signs, Notes:
color preprinted, without symbols 1) For ordering example, see page 359.
P R I NT E D
F OR YOU

Unlabeled or labeled according to customer

specifications

Technical data
General data
Can be printed with: THERMOMARK ROLL  THERMOMARK ROLL X1  THERMO-
The color preprinted PML-P prohibition MARK X1.1  THERMOMARK X1.2
Material PVC
signs on a roll allow you to create custom Temperature range [°C] -40 ... 90
prohibition notices. A variety of symbols Wipe resistance DIN EN 61010-1 (VDE 0411-1)
are available in the CLIP PROJECT soft- Components Silicone-free

ware. The prohibition signs offer the Ordering data

following features:
Pcs. /
– Highly flexible, plasticized PVC labels Description Color Type Order No.
Pkt.
which are ideal for uneven surfaces Prohibition sign, color preprinted, without symbols
– Suitable for indoor and outdoor use
500 labels per roll, diameter: 50 mm red/white PML-P100 (D50)R 1014225 1
– The prohibition signs conform to the
ISO 7010 international standard 250 labels per roll, diameter: 100 mm red/white PML-P100 (D100)R 1014226 1
– The format automatically ensures printing Prohibition sign, color preprinted, without symbols, labeled
with a high level of positional accuracy according to customer specifications1)
– The special packaging protects rolls that 1 label per strip, diameter: 50 mm red/white PML-P100 (D50)R CUS 1014227 1
have already been started from the dirt
1 label per strip, diameter: 100 mm red/white PML-P100 (D100)R CUS 1014228 1
found in industrial environments
– Labeling service: Phoenix Contact can
custom-label all PML ... markers according
to your requirements

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 327

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Marking and labeling - MARKING system
System marking
Stick-on prohibition signs,
preprinted with symbols

Symbol - No smoking

Technical data
General data
Material PVC
The PML-P... prohibition signs are available Temperature range [°C] -40 ... 90
with various symbols. The prohibition signs Wipe resistance DIN EN 61010-1 (VDE 0411-1)
Components Silicone-free
offer the following features:
– Highly flexible, plasticized PVC labels Ordering data
which are ideal for uneven surfaces Description Color Type Order No.
Pcs. /
– Suitable for indoor and outdoor use Pkt.

– The mandatory signs conform to the Prohibition sign, preprinted with “No smoking” symbol

ISO 7010 international standard 3-section, diameter: 50 mm red/white PML-P101 (D50) 1014184 5
3-section, diameter: 100 mm red/white PML-P101 (D100) 1014185 5
1-section, diameter: 200 mm red/white PML-P101 (D200) 1014186 5
Prohibition sign, preprinted with “Do not connect” symbol

3-section, diameter: 50 mm red/white

3-section, diameter: 100 mm red/white
1-section, diameter: 200 mm red/white
Prohibition sign, preprinted with
“Forbidden for persons with pacemakers” symbol
3-section, diameter: 50 mm red/white
3-section, diameter: 100 mm red/white
1-section, diameter: 200 mm red/white
Prohibition sign, preprinted with “Do not touch” symbol

3-section, diameter: 50 mm red/white

3-section, diameter: 100 mm red/white
1-section, diameter: 200 mm red/white

328 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Marking and labeling - MARKING system
System marking

Symbol - Do not connect Symbol - Forbidden for persons with pacemakers Symbol - Do not touch

Technical data Technical data Technical data

PVC PVC PVC

-40 ... 90 -40 ... 90 -40 ... 90
DIN EN 61010-1 (VDE 0411-1) DIN EN 61010-1 (VDE 0411-1) DIN EN 61010-1 (VDE 0411-1)
Silicone-free Silicone-free Silicone-free

Ordering data Ordering data Ordering data

Pcs. / Pcs. / Pcs. /

Type Order No. Type Order No. Type Order No.
Pkt. Pkt. Pkt.

PML-P102 (D50) 1014187 5

PML-P102 (D100) 1014188 5
PML-P102 (D200) 1014189 5

PML-P103 (D50) 1014190 5

PML-P103 (D100) 1014191 5
PML-P103 (D200) 1014192 5

PML-P104 (D50) 1014193 5

PML-P104 (D100) 1014194 5
PML-P104 (D200) 1014195 5

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 329

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Marking and labeling - MARKING system
System marking
Stick-on prohibition signs,
preprinted with symbols

– Printed cards
– Highly flexible, plasticized PVC labels
which are ideal for uneven surfaces
– Suitable for indoor and outdoor use
– The mandatory signs conform to the
ISO 7010 international standard

Symbol - Do not walk here Symbol - No fire, naked lights or smoking

Technical data Technical data

General data
Material PVC PVC
Temperature range [°C] -40 ... 90 -40 ... 90
Wipe resistance DIN EN 61010-1 (VDE 0411-1) DIN EN 61010-1 (VDE 0411-1)
Components Silicone-free Silicone-free

Ordering data Ordering data

Pcs. / Pcs. /
Description Color Type Order No. Type Order No.
Pkt. Pkt.
Prohibition sign, preprinted with “Do not walk here” symbol

3-section, diameter: 50 mm red/white PML-P105 (D50) 1014196 5

3-section, diameter: 100 mm red/white PML-P105 (D100) 1014197 5
1-section, diameter: 200 mm red/white PML-P105 (D200) 1014198 5
Prohibition sign, preprinted with “No fire, naked lights or smoking”
symbol
3-section, diameter: 50 mm red/white PML-P106 (D50) 1014199 5
3-section, diameter: 100 mm red/white PML-P106 (D100) 1014200 5
1-section, diameter: 200 mm red/white PML-P106 (D200) 1014201 5
Prohibition sign, preprinted with “Do not reach in” symbol

3-section, diameter: 50 mm red/white

3-section, diameter: 100 mm red/white
1-section, diameter: 200 mm red/white
Prohibition sign, preprinted with “Do not extinguish with water”
symbol
3-section, diameter: 50 mm red/white
3-section, diameter: 100 mm red/white
1-section, diameter: 200 mm red/white
Prohibition sign, preprinted with “No mobile phones” symbol

3-section, diameter: 50 mm red/white

3-section, diameter: 100 mm red/white
1-section, diameter: 200 mm red/white

330 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Marking and labeling - MARKING system
System marking

Symbol - Do not reach in Symbol - Do not extinguish with water Symbol - No mobile phones

Technical data Technical data Technical data

PVC PVC PVC

-40 ... 90 -40 ... 90 -40 ... 90
DIN EN 61010-1 (VDE 0411-1) DIN EN 61010-1 (VDE 0411-1) DIN EN 61010-1 (VDE 0411-1)
Silicone-free Silicone-free Silicone-free

Ordering data Ordering data Ordering data

Pcs. / Pcs. / Pcs. /

Type Order No. Type Order No. Type Order No.
Pkt. Pkt. Pkt.

PML-P107 (D50) 1014202 5

PML-P107 (D100) 1014203 5
PML-P107 (D200) 1014204 5

PML-P108 (D50) 1014205 5

PML-P108 (D100) 1014206 5
PML-P108 (D200) 1014207 5

PML-P109 (D50) 1014208 5

PML-P109 (D100) 1014209 5
PML-P109 (D200) 1014210 5

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 331

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Marking and labeling - MARKING system
System marking
Stick-on prohibition signs,
preprinted with symbols

– Printed cards
– Highly flexible, plasticized PVC labels
which are ideal for uneven surfaces
– Suitable for indoor and outdoor use
– The mandatory signs conform to the
ISO 7010 international standard

Symbol - No food

Technical data
General data
Material PVC
Temperature range [°C] -40 ... 90
Wipe resistance DIN EN 61010-1 (VDE 0411-1)
Components Silicone-free

Ordering data

Pcs. /
Description Color Type Order No.
Pkt.
Prohibition sign, preprinted with “No food” symbol

3-section, diameter: 50 mm red/white PML-P110 (D50) 1014211 5

3-section, diameter: 100 mm red/white PML-P110 (D100) 1014212 5
1-section, diameter: 200 mm red/white PML-P110 (D200) 1014213 5
Prohibition sign, preprinted with
“No access for unauthorized persons” symbol
3-section, diameter: 50 mm red/white
3-section, diameter: 100 mm red/white
1-section, diameter: 200 mm red/white

332 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Marking and labeling - MARKING system
System marking

Symbol - No access for unauthorized persons

Technical data

PVC
-40 ... 90
DIN EN 61010-1 (VDE 0411-1)
Silicone-free

Ordering data

Pcs. /
Type Order No.
Pkt.

PML-P111 (D50) 1014214 5

PML-P111 (D100) 1014215 5
PML-P111 (D200) 1014216 5

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 333

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Marking and labeling - MARKING system
System marking
UniSheet - stick-on mandatory signs, Can be printed with:
color preprinted, without symbols
P R I NT E D
F OR YOU

1
2
1
2
Thermal transfer for sheets
and cards

Unlabeled or labeled according to customer

specifications

Technical data
General data
Can be printed with: THERMOMARK CARD PLUS  THERMOMARK CARD
The unlabeled US-PML-M mandatory Material PVC
signs on US cards allow you to create cus- Temperature range [°C] -40 ... 90
Wipe resistance DIN EN 61010-1 (VDE 0411-1)
tom information signs. A variety of symbols Components Silicone-free
are available in the CLIP PROJECT soft- Ordering data
ware. The mandatory signs offer the
following features: Description Color Type Order No.
Pcs. /
Pkt.
– Highly flexible, plasticized PVC labels
Mandatory sign, color preprinted, without symbols
which are ideal for uneven surfaces
– Suitable for indoor and outdoor use 4-section, diameter: 50 mm blue US-PML-M100 (D50) 1014176 10
1-section, diameter: 100 mm blue US-PML-M100 (D100) 1014177 10
– The mandatory signs conform to the Mandatory sign, unprinted,
ISO 7010 international standard labeled according to customer specifications1)
– The markers, which are supplied in uni- 4-section, diameter: 50 mm blue US-PML-M100 (D50) CUS 1014178 1
form sheets, can be printed onto quickly, 1-section, diameter: 100 mm blue US-PML-M100 (D100) CUS 1014179 1
easily, and cost-effectively using the Accessories
THERMOMARK CARD Magazine, for THERMOMARK CARD...,
– The format automatically ensures printing for accommodating all US-... materials
with a high level of positional accuracy THERMOMARK CARD-US-MAG1 5146451 1

– The perforated markers are easy to Ink ribbon, length: 300 m, width: 110 mm white TM-RIBBON 110-TC/TR WH 1014402 1
separate
– Labeling service: Phoenix Contact can
custom-label all US-PML ... markers
according to your requirements
Notes:
1) For ordering example, see page 359.

334 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Marking and labeling - MARKING system
System marking
Stick-on mandatory signs, Can be printed with:
color preprinted, without symbols
P R I NT E D
F OR YOU

2
1
1
2
Thermal transfer for rolls

Unlabeled or labeled according to customer

specifications

Technical data
General data
Can be printed with: THERMOMARK ROLL  THERMOMARK ROLL X1  THERMO-
The color preprinted PML-M mandatory MARK X1.1  THERMOMARK X1.2
Material PVC
signs on a roll allow you to create custom Temperature range [°C] -40 ... 90
mandatory notices. A variety of symbols are Wipe resistance DIN EN 61010-1 (VDE 0411-1)
available in the CLIP PROJECT software. Components Silicone-free

The mandatory signs offer Ordering data

the following features:
Pcs. /
– Highly flexible, plasticized PVC labels Description Color Type Order No.
Pkt.
which are ideal for uneven surfaces Mandatory sign, color preprinted, without symbols
– Suitable for indoor and outdoor use
500 labels per roll, diameter: 50 mm blue PML-M100 (D50)R 1014180 1
– The mandatory signs conform to the
ISO 7010 international standard 250 labels per roll, diameter: 100 mm blue PML-M100 (D100)R 1014181 1
– The format automatically ensures printing Mandatory sign, color preprinted, without symbols,
with a high level of positional accuracy labeled according to customer specifications1)
– The special packaging protects rolls that 1 label per strip, diameter: 50 mm blue PML-M100 (D50)R CUS 1014182 1
have already been started from the dirt
1 label per strip, diameter: 100 mm blue PML-M100 (D100)R CUS 1014183 1
found in industrial environments
– Labeling service: Phoenix Contact can
Accessories
custom-label all markers according to
your requirements Ink ribbon, length: 300 m, width: 110 mm white TM-RIBBON 110-TC/TR WH 1014402 1

Notes:
1) For ordering example, see page 359.

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 335

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Marking and labeling - MARKING system
System marking
Stick-on mandatory signs, preprinted,
with symbols

Symbol - General mandatory action symbol

Technical data
General data
Material PVC
The PML-M mandatory signs are available Temperature range [°C] -40 ... 90
with various symbols. The mandatory signs Wipe resistance DIN EN 61010-1 (VDE 0411-1)
Components Silicone-free
offer the following features:
– Highly flexible, plasticized PVC labels Ordering data
which are ideal for uneven surfaces Description Color Type Order No.
Pcs. /
– Suitable for indoor and outdoor use Pkt.

– The mandatory signs conform to the Mandatory sign, preprinted with

“General mandatory action symbol”
ISO 7010 international standard 3-section, diameter: 50 mm blue PML-M101 (D50) 1014137 5
3-section, diameter: 100 mm blue PML-M101 (D100) 1014138 5
1-section, diameter: 200 mm blue PML-M101 (D200) 1014139 5
Mandatory sign, preprinted with
“Wear safety goggles” symbol
3-section, diameter: 50 mm blue
3-section, diameter: 100 mm blue
1-section, diameter: 200 mm blue
Mandatory sign, preprinted with
“Observe instructions for use” symbol
3-section, diameter: 50 mm blue
3-section, diameter: 100 mm blue
1-section, diameter: 200 mm blue
Mandatory sign, preprinted with
“Wear ear protectors” symbol
3-section, diameter: 50 mm blue
3-section, diameter: 100 mm blue
1-section, diameter: 200 mm blue

336 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Marking and labeling - MARKING system
System marking

Symbol - Wear safety goggles Symbol - Observe instructions for use Symbol - Wear ear protectors

Technical data Technical data Technical data

PVC PVC PVC

-40 ... 90 -40 ... 90 -40 ... 90
DIN EN 61010-1 (VDE 0411-1) DIN EN 61010-1 (VDE 0411-1) DIN EN 61010-1 (VDE 0411-1)
Silicone-free Silicone-free Silicone-free

Ordering data Ordering data Ordering data

Pcs. / Pcs. / Pcs. /

Type Order No. Type Order No. Type Order No.
Pkt. Pkt. Pkt.

PML-M102 (D50) 1014140 5

PML-M102 (D100) 1014141 5
PML-M102 (D200) 1014142 5

PML-M103 (D50) 1014143 5

PML-M103 (D100) 1014144 5
PML-M103 (D200) 1014145 5

PML-M104 (D50) 1014146 5

PML-M104 (D100) 1014147 5
PML-M104 (D200) 1014148 5

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 337

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Marking and labeling - MARKING system
System marking
Stick-on mandatory signs, preprinted,
with symbols

Printed cards
– Highly flexible, plasticized PVC labels
which are ideal for uneven surfaces
– Suitable for indoor and outdoor use
– The mandatory signs conform to the
ISO 7010 international standard

Symbol - Wear face shield Symbol - Wear safety helmet

Technical data Technical data

General data
Material PVC PVC
Temperature range [°C] -40 ... 90 -40 ... 90
Wipe resistance DIN EN 61010-1 (VDE 0411-1) DIN EN 61010-1 (VDE 0411-1)
Components Silicone-free Silicone-free

Ordering data Ordering data

Pcs. / Pcs. /
Description Color Type Order No. Type Order No.
Pkt. Pkt.
Mandatory sign, preprinted with “Wear face shield” symbol

3-section, diameter: 50 mm blue PML-M105 (D50) 1014149 5

3-section, diameter: 100 mm blue PML-M105 (D100) 1014150 5
1-section, diameter: 200 mm blue PML-M105 (D200) 1014151 5
Mandatory sign, preprinted with “Wear safety helmet” symbol

3-section, diameter: 50 mm blue PML-M106 (D50) 1014152 5

3-section, diameter: 100 mm blue PML-M106 (D100) 1014153 5
1-section, diameter: 200 mm blue PML-M106 (D200) 1014154 5
Mandatory sign, preprinted with “Use face mask” symbol

3-section, diameter: 50 mm blue

3-section, diameter: 100 mm blue
1-section, diameter: 200 mm blue
Mandatory sign, preprinted with “Wear protective gloves” symbol

3-section, diameter: 50 mm blue

3-section, diameter: 100 mm blue
1-section, diameter: 200 mm blue
Mandatory sign, preprinted with “Wear protective clothing” symbol

3-section, diameter: 50 mm blue

3-section, diameter: 100 mm blue
1-section, diameter: 200 mm blue

338 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Marking and labeling - MARKING system
System marking

Symbol - Use face mask Symbol - Wear protective gloves Symbol - Wear protective clothing

Technical data Technical data Technical data

PVC PVC PVC

-40 ... 90 -40 ... 90 -40 ... 90
DIN EN 61010-1 (VDE 0411-1) DIN EN 61010-1 (VDE 0411-1) DIN EN 61010-1 (VDE 0411-1)
Silicone-free Silicone-free Silicone-free

Ordering data Ordering data Ordering data

Pcs. / Pcs. / Pcs. /

Type Order No. Type Order No. Type Order No.
Pkt. Pkt. Pkt.

PML-M107 (D50) 1014155 5

PML-M107 (D100) 1014156 5
PML-M107 (D200) 1014157 5

PML-M108 (D50) 1014158 5

PML-M108 (D100) 1014159 5
PML-M108 (D200) 1014160 5

PML-M109 (D50) 1014161 5

PML-M109 (D100) 1014162 5
PML-M109 (D200) 1014163 5

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 339

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Marking and labeling - MARKING system
System marking
Stick-on mandatory signs, preprinted,
with symbols

Printed cards
– Highly flexible, plasticized PVC labels
which are ideal for uneven surfaces
– Suitable for indoor and outdoor use
– The mandatory signs conform to the
ISO 7010 international standard

Symbol - Disconnect before starting work Symbol - Wear conductive footwear

Technical data Technical data

General data
Material PVC PVC
Temperature range [°C] -40 ... 90 -40 ... 90
Wipe resistance DIN EN 61010-1 (VDE 0411-1) DIN EN 61010-1 (VDE 0411-1)
Components Silicone-free Silicone-free

Ordering data Ordering data

Pcs. / Pcs. /
Description Color Type Order No. Type Order No.
Pkt. Pkt.
Mandatory sign, preprinted with “Disconnect before starting work”
symbol
3-section, diameter: 50 mm blue PML-M110 (D50) 1014164 5
3-section, diameter: 100 mm blue PML-M110 (D100) 1014165 5
1-section, diameter: 200 mm blue PML-M110 (D200) 1014166 5
Mandatory sign, preprinted with “Wear conductive footwear” symbol

3-section, diameter: 50 mm blue PML-M111 (D50) 1014167 5

3-section, diameter: 100 mm blue PML-M111 (D100) 1014168 5
1-section, diameter: 200 mm blue PML-M111 (D200) 1014169 5
Mandatory sign, preprinted with “Wear head cover” symbol

3-section, diameter: 50 mm blue

3-section, diameter: 100 mm blue
1-section, diameter: 200 mm blue
Mandatory sign, preprinted with “Wear safety shoes” symbol

3-section, diameter: 50 mm blue

3-section, diameter: 100 mm blue
1-section, diameter: 200 mm blue

340 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Marking and labeling - MARKING system
System marking

Symbol - Wear head cover Symbol - Wear safety shoes

Technical data Technical data

PVC PVC
-40 ... 90 -40 ... 90
DIN EN 61010-1 (VDE 0411-1) DIN EN 61010-1 (VDE 0411-1)
Silicone-free Silicone-free

Ordering data Ordering data

Pcs. / Pcs. /
Type Order No. Type Order No.
Pkt. Pkt.

PML-M112 (D50) 1014170 5

PML-M112 (D100) 1014171 5
PML-M112 (D200) 1014172 5

PML-M113 (D50) 1014173 5

PML-M113 (D100) 1014174 5
PML-M113 (D200) 1014175 5

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 341

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Marking and labeling - MARKING system
System marking
Stick-on pipeline markers, unlabeled Can be printed with:
P R I NT E D
F OR YOU

2
1
1
2
Thermal transfer for rolls

Group 1 (water)

Technical data
General data
Can be printed with: THERMOMARK ROLL  THERMOMARK ROLL X1 
The color preprinted PML-T... pipeline THERMOMARK X1.1  THERMOMARK X1.2
Material Polyester
markers supplied in rolls enable the custom Temperature range [°C] -40 ... 150
marking of pipelines according to DIN 2403. Wipe resistance DIN EN 61010-1 (VDE 0411-1)
The markers offer the following features: Ordering data
– Finely perforated arrowheads enable the
arrowheads which are not required to be Description Color Type Order No.
Pcs. /
Pkt.
easily removed
Pipeline markers, green, group 1 (water), unprinted
– High adhesive strength
– High temperature resistance 250 labels per roll, marker size: 26 x 280 mm green PML-T101 (26X280)R 1014229 1

– Suitable for indoor and outdoor use 250 labels per roll, marker size: 52 x 560 mm green PML-T101 (52X560)R 1014230 1
– In combination with the PML-GHS haz-
Pipeline markers, red, group 2 (steam), unprinted
ardous substances labels, marking which
conforms to the Ordinance on Hazardous 250 labels per roll, marker size: 26 x 280 mm red
Substances (GefStoffV) can be applied 250 labels per roll, marker size: 52 x 560 mm red
– The format automatically ensures printing
Pipeline markers, gray, group 3 (air), unprinted
with a high level of positional accuracy
– The special packaging protects rolls that 250 labels per roll, marker size: 26 x 280 mm gray
have already been started from the dirt 250 labels per roll, marker size: 52 x 560 mm gray
found in industrial environments
– Labeling service: Phoenix Contact can Pipeline markers, yellow/red, group 4 (combustible gases),
unprinted
custom-label all markers according to 250 labels per roll, marker size: 26 x 280 mm yellow/red
your requirements
250 labels per roll, marker size: 52 x 560 mm yellow/red
Notes:
Pipeline markers, green, group 1 (water),
1) For ordering example, see page 359. labeled according to customer specifications1)

3 labels per strip, marker size: 26 x 280 mm green PML-T101 (26X280)R CUS 1014249 1

1 label per strip, marker size: 52 x 560 mm green PML-T101 (52X560)R CUS 1014250 1

Pipeline markers, red, group 2 (steam),

labeled according to customer specifications1)

3 labels per strip, marker size: 26 x 280 mm red

1 label per strip, marker size: 52 x 560 mm red

Pipeline markers, gray, group 3 (air),

labeled according to customer specifications1)

3 labels per strip, marker size: 26 x 280 mm gray

1 label per strip, marker size: 52 x 560 mm gray

Pipeline markers, yellow/red, group 4 (combustible gases),

labeled according to customer specifications1)
3 labels per strip, marker size: 26 x 280 mm yellow/red

1 label per strip, marker size: 52 x 560 mm yellow/red

342 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Marking and labeling - MARKING system
System marking

P R I NT E D P R I NT E D P R I NT E D
F OR YOU F OR YOU F OR YOU

Group 2 (steam) Group 3 (air) Group 4 (combustible gases)

Technical data Technical data Technical data

THERMOMARK ROLL  THERMOMARK ROLL X1  THERMOMARK ROLL  THERMOMARK ROLL X1  THERMOMARK ROLL  THERMOMARK ROLL X1 
THERMOMARK X1.1  THERMOMARK X1.2 THERMOMARK X1.1  THERMOMARK X1.2 THERMOMARK X1.1  THERMOMARK X1.2
Polyester Polyester Polyester
-40 ... 150 -40 ... 150 -40 ... 150
DIN EN 61010-1 (VDE 0411-1) DIN EN 61010-1 (VDE 0411-1) DIN EN 61010-1 (VDE 0411-1)

Ordering data Ordering data Ordering data

Pcs. / Pcs. / Pcs. /

Type Order No. Type Order No. Type Order No.
Pkt. Pkt. Pkt.

PML-T102 (26X280)R 1014231 1

PML-T102 (52X560)R 1014232 1

PML-T103 (26X280)R 1014233 1

PML-T103 (52X560)R 1014234 1

PML-T104 (26X280)R 1014235 1

PML-T104 (52X560)R 1014236 1

PML-T102 (26X280)R CUS 1014251 1

PML-T102 (52X560)R CUS 1014252 1

PML-T103 (26X280)R CUS 1014253 1

PML-T103 (52X560)R CUS 1014254 1

PML-T104 (26X280)R CUS 1014255 1

PML-T104 (52X560)R CUS 1014256 1

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 343

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Marking and labeling - MARKING system
System marking
Stick-on pipeline markers, unlabeled Can be printed with:
P R I NT E D
F OR YOU
– Finely perforated arrowheads enable the
arrowheads which are not required to be

2
1
easily removed

1
2
– High adhesive strength
– High temperature resistance Thermal transfer for rolls
– Suitable for indoor and outdoor use
– In combination with the PML-GHS haz-
ardous substances labels, marking which
conforms to the Ordinance on Hazardous
Substances (GefStoffV) can be applied Group 5 (non-combustible gases)

Technical data
General data
Can be printed with: THERMOMARK ROLL  THERMOMARK ROLL X1 
THERMOMARK X1.1  THERMOMARK X1.2
Material Polyester
Temperature range [°C] -40 ... 150
Wipe resistance DIN EN 61010-1 (VDE 0411-1)

Ordering data

Pcs. /
Description Color Type Order No.
Pkt.
Pipeline markers, yellow/black,
group 5 (non-combustible gases), unprinted
250 labels per roll, marker size: 26 x 280 mm yellow/black PML-T105 (26X280)R 1014237 1

250 labels per roll, marker size: 52 x 560 mm yellow/black PML-T105 (52X560)R 1014238 1

Pipeline markers, orange, group 6 (acids), unprinted

250 labels per roll, marker size: 26 x 280 mm orange

250 labels per roll, marker size: 52 x 560 mm orange

Pipeline markers, violet, group 7 (alkalis), unprinted

250 labels per roll, marker size: 26 x 280 mm violet

250 labels per roll, marker size: 52 x 560 mm violet

Pipeline markers, brown/red,

group 8 (combustible liquids), unprinted
250 labels per roll, marker size: 26 x 280 mm brown/red

250 labels per roll, marker size: 52 x 560 mm brown/red

Pipeline markers, yellow/black,

group 5 (non-combustible gases),
labeled according to customer specifications
3 labels per strip, marker size: 26 x 280 mm yellow/black PML-T105 (26X280)R CUS 1014257 1

1 label per strip, marker size: 52 x 560 mm yellow/black PML-T105 (52X560)R CUS 1014258 1

Pipeline markers, orange, group 6 (acids),

labeled according to customer specifications
3 labels per strip, marker size: 26 x 280 mm orange

1 label per strip, marker size: 52 x 560 mm orange

Pipeline markers, violet, group 7 (alkalis),

labeled according to customer specifications
3 labels per strip, marker size: 26 x 280 mm violet

1 label per strip, marker size: 52 x 560 mm violet

Pipeline markers, brown/red, group 8 (combustible liquids),

labeled according to customer specifications

3 labels per strip, marker size: 26 x 280 mm brown/red

1 label per strip, marker size: 52 x 560 mm brown/red

344 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Marking and labeling - MARKING system
System marking

P R I NT E D P R I NT E D P R I NT E D
F OR YOU F OR YOU F OR YOU

Group 6 (acids) Group 7 (alkalis) Group 8 (combustible liquids)

Technical data Technical data Technical data

THERMOMARK ROLL  THERMOMARK ROLL X1  THERMOMARK ROLL  THERMOMARK ROLL X1  THERMOMARK ROLL  THERMOMARK ROLL X1 
THERMOMARK X1.1  THERMOMARK X1.2 THERMOMARK X1.1  THERMOMARK X1.2 THERMOMARK X1.1  THERMOMARK X1.2
Polyester Polyester Polyester
-40 ... 150 -40 ... 150 -40 ... 150
DIN EN 61010-1 (VDE 0411-1) DIN EN 61010-1 (VDE 0411-1) DIN EN 61010-1 (VDE 0411-1)

Ordering data Ordering data Ordering data

Pcs. / Pcs. / Pcs. /

Type Order No. Type Order No. Type Order No.
Pkt. Pkt. Pkt.

PML-T106 (26X280)R 1014239 1

PML-T106 (52X560)R 1014240 1

PML-T107 (26X280)R 1014241 1

PML-T107 (52X560)R 1014242 1

PML-T108 (26X280)R 1014243 1

PML-T108 (52X560)R 1014244 1

PML-T106 (26X280)R CUS 1014259 1

PML-T106 (52X560)R CUS 1014260 1

PML-T107 (26X280)R CUS 1014261 1

PML-T107 (52X560)R CUS 1014262 1

PML-T108 (26X280)R CUS 1014263 1

PML-T108 (52X560)R CUS 1014264 1

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 345

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Marking and labeling - MARKING system
System marking
Stick-on pipeline markers, unlabeled Can be printed with:
P R I NT E D
F OR YOU
– Finely perforated arrowheads enable the
arrowheads which are not required to be

2
1
easily removed

1
2
– High adhesive strength
– High temperature resistance Thermal transfer for rolls
– Suitable for indoor and outdoor use
– In combination with the PML-GHS haz-
ardous substances labels, marking which
conforms to the Ordinance on Hazardous
Substances (GefStoffV) can be applied Group 9 (non-combustible liquids)

Notes:
1) For ordering example, see page 359.

Technical data
General data
Can be printed with: THERMOMARK ROLL  THERMOMARK ROLL X1 
THERMOMARK X1.1  THERMOMARK X1.2
Material Polyester
Temperature range [°C] -40 ... 150
Wipe resistance DIN EN 61010-1 (VDE 0411-1)

Ordering data

Pcs. /
Description Color Type Order No.
Pkt.
Pipeline markers, brown/black,
group 9 (non-combustible liquids), unprinted
250 labels per roll, marker size: 26 x 280 mm brown/black PML-T109 (26X280)R 1014245 1

250 labels per roll, marker size: 52 x 560 mm brown/black PML-T109 (52X560)R 1014246 1

Pipeline markers, blue, group 0 (oxygen), unprinted

250 labels per roll, marker size: 26 x 280 mm blue

250 labels per roll, marker size: 52 x 560 mm blue

Pipeline markers, brown/black,

group 9 (non-combustible liquids),
labeled according to customer specifications1)

3 labels per strip, marker size: 26 x 280 mm brown/black PML-T109 (26X280)R CUS 1014265 1

1 label per strip, marker size: 52 x 560 mm brown/black PML-T109 (52X560)R CUS 1014266 1

Pipeline markers, blue, group 0 (oxygen),

labeled according to customer specifications1)

3 labels per strip, marker size: 26 x 280 mm blue

1 label per strip, marker size: 52 x 560 mm blue

346 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Marking and labeling - MARKING system
System marking

P R I NT E D
F OR YOU

Group 0 (oxygen)

Technical data

THERMOMARK ROLL  THERMOMARK ROLL X1 

THERMOMARK X1.1  THERMOMARK X1.2
Polyester
-40 ... 150
DIN EN 61010-1 (VDE 0411-1)

Ordering data

Pcs. /
Type Order No.
Pkt.

PML-T110 (26X280)R 1014247 1

PML-T110 (52X560)R 1014248 1

PML-T110 (26X280)R CUS 1014267 1

PML-T110 (52X560)R CUS 1014268 1

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 347

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Marking and labeling - MARKING system
System marking
UniSheet - stick-on hazardous Can be printed with:
substances labels, color preprinted,
without symbols

1
2
1
2
Thermal transfer for sheets
and cards

Unlabeled

Technical data
General data
Can be printed with: THERMOMARK CARD PLUS  THERMOMARK CARD
The unlabeled US-PML-GHS hazardous Material Polyester
substances labels on US cards allow you to Temperature range [°C] -40 ... 150
Wipe resistance DIN EN 61010-1 (VDE 0411-1)
create custom information signs. A variety
of symbols are available in the CLIP PROJECT Ordering data
software. The hazardous substances labels Description Color Type Order No.
Pcs. /
offer the following features: Pkt.

– High adhesive strength Hazardous substances label, color preprinted, without symbols

– High temperature resistance 50-section, marker size: 13 x 13 mm red/white US-PML-GHS100 (13X13) 1014287 10
– Suitable for indoor and outdoor use 9-section, marker size: 25 x 25 mm red/white US-PML-GHS100 (25X25) 1014288 10
– The markers conform to the GHS inter- Accessories
national standard Magazine, for THERMOMARK CARD...,
– The markers, which are supplied in uni- for accommodating all US-... materials
THERMOMARK CARD-US-MAG1 5146451 1
form sheets, can be printed onto quickly,
easily, and cost-effectively using the
THERMOMARK CARD
– The format automatically ensures printing
with a high level of positional accuracy
– The perforated markers are easy to
separate

348 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Marking and labeling - MARKING system
System marking
Stick-on hazardous substances labels, Can be printed with:
color preprinted, without symbols

2
1
1
2
Thermal transfer for rolls

Unlabeled

Technical data
General data
Can be printed with: THERMOMARK ROLL  THERMOMARK ROLL X1 
The color preprinted PML-GHS...R haz- THERMOMARK X1.1  THERMOMARK X1.2
Material Polyester
ardous substances labels on a roll allow you Temperature range [°C] -40 ... 150
to create custom information signs. A vari- Wipe resistance DIN EN 61010-1 (VDE 0411-1)
ety of symbols are available in the Ordering data
CLIP PROJECT software. The hazardous
substances labels offer the following fea- Description Color Type Order No.
Pcs. /
Pkt.
tures:
Hazardous substances label, color preprinted, without symbols
– High adhesive strength
– High temperature resistance 500 labels per roll, marker size: 13 x 13 mm red/white PML-GHS100 (13X13)R 1014289 1

– Suitable for indoor and outdoor use 500 labels per roll, marker size: 25 x 25 mm red/white PML-GHS100 (25X25)R 1014290 1
– The markers conform to the GHS inter-
national standard
– The format automatically ensures printing
with a high level of positional accuracy
– The special packaging protects rolls that
have already been started from the dirt
found in industrial environments

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 349

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Marking and labeling - MARKING system
System marking
Stick-on hazardous substances labels,
preprinted with symbol

Symbol - Explosive

Technical data
General data
Material Polyester
The PML-GHS hazardous substances la- Temperature range [°C] -40 ... 150
bels are available with various symbols and Wipe resistance DIN EN 61010-1 (VDE 0411-1)

enable the additional custom marking of the Ordering data

PML-T pipeline markers according to the Pcs. /
Ordinance on Hazardous Substances. The Description Color Type Order No.
Pkt.
hazardous substances labels offer the fol- Hazardous substances label, preprinted with “Explosive” symbol
lowing features:
35-section, marker size: 13 x 13 mm red/white PML-GHS101 (13X13) 1014269 5
– High adhesive strength 12-section, marker size: 25 x 25 mm red/white PML-GHS101 (25X25) 1014270 5
– High temperature resistance Hazardous substances label, preprinted with “Flammable” symbol
– Suitable for indoor and outdoor use 35-section, marker size: 13 x 13 mm red/white
– The hazardous substances labels conform 12-section, marker size: 25 x 25 mm red/white
to the GHS international standard Hazardous substances label, preprinted with “Oxidizing” symbol

35-section, marker size: 13 x 13 mm red/white

12-section, marker size: 25 x 25 mm red/white
Hazardous substances label, preprinted with “Pressurized
gases” symbol
35-section, marker size: 13 x 13 mm red/white
12-section, marker size: 25 x 25 mm red/white

350 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Marking and labeling - MARKING system
System marking

Symbol - Flammable Symbol - Oxidizing Symbol - Pressurized gases

Technical data Technical data Technical data

Polyester Polyester Polyester

-40 ... 150 -40 ... 150 -40 ... 150
DIN EN 61010-1 (VDE 0411-1) DIN EN 61010-1 (VDE 0411-1) DIN EN 61010-1 (VDE 0411-1)

Ordering data Ordering data Ordering data

Pcs. / Pcs. / Pcs. /

Type Order No. Type Order No. Type Order No.
Pkt. Pkt. Pkt.

PML-GHS102 (13X13) 1014271 5

PML-GHS102 (25X25) 1014272 5

PML-GHS103 (13X13) 1014273 5

PML-GHS103 (25X25) 1014274 5

PML-GHS104 (13X13) 1014275 5

PML-GHS104 (25X25) 1014276 5

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 351

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Marking and labeling - MARKING system
System marking
Stick-on hazardous substances labels,
preprinted with symbol

– Printed cards
– High adhesive strength
– High temperature resistance
– Suitable for indoor and outdoor use
– The hazardous substances labels conform
to the GHS international standard

Symbol - Corrosivity Symbol - Toxic

Technical data Technical data

General data
Material Polyester Polyester
Temperature range [°C] -40 ... 150 -40 ... 150
Wipe resistance DIN EN 61010-1 (VDE 0411-1) DIN EN 61010-1 (VDE 0411-1)

Ordering data Ordering data

Pcs. / Pcs. /
Description Color Type Order No. Type Order No.
Pkt. Pkt.
Hazardous substances label, preprinted with “Corrosivity” symbol

35-section, marker size: 13 x 13 mm red/white PML-GHS105 (13X13) 1014277 5

12-section, marker size: 25 x 25 mm red/white PML-GHS105 (25X25) 1014278 5
Hazardous substances label, preprinted with “Toxic” symbol

35-section, marker size: 13 x 13 mm red/white PML-GHS106 (13X13) 1014279 5

12-section, marker size: 25 x 25 mm red/white PML-GHS106 (25X25) 1014280 5
Hazardous substances label, preprinted with
“General symbol for hazardous substances”
35-section, marker size: 13 x 13 mm red/white
12-section, marker size: 25 x 25 mm red/white
Hazardous substances label, preprinted with
“Hazardous to health” symbol
35-section, marker size: 13 x 13 mm red/white
12-section, marker size: 25 x 25 mm red/white
Hazardous substances label, preprinted with
“Hazardous to the environment” symbol
35-section, marker size: 13 x 13 mm red/white
12-section, marker size: 25 x 25 mm red/white

352 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Marking and labeling - MARKING system
System marking

Symbol - General symbol for hazardous sub- Symbol - Hazardous to health Symbol - Hazardous to the environment
stances

Technical data Technical data Technical data

Polyester Polyester Polyester

-40 ... 150 -40 ... 150 -40 ... 150
DIN EN 61010-1 (VDE 0411-1) DIN EN 61010-1 (VDE 0411-1) DIN EN 61010-1 (VDE 0411-1)

Ordering data Ordering data Ordering data

Pcs. / Pcs. / Pcs. /

Type Order No. Type Order No. Type Order No.
Pkt. Pkt. Pkt.

PML-GHS107 (13X13) 1014281 5

PML-GHS107 (25X25) 1014282 5

PML-GHS108 (13X13) 1014283 5

PML-GHS108 (25X25) 1014284 5

PML-GHS109 (13X13) 1014285 5

PML-GHS109 (25X25) 1014286 5

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 353

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Marking and labeling - MARKING system
System marking
UniSheet - stick-on combi labels, Can be printed with:
unprinted

1
2
1
2
Thermal transfer for sheets
and cards

Unlabeled

Technical data
General data
Can be printed with: THERMOMARK CARD PLUS  THERMOMARK CARD
The unlabeled US-EMLF ... combi labels Material PVC
on US ... cards allow you to create custom Temperature range [°C] -40 ... 90
Wipe resistance DIN EN 61010-1 (VDE 0411-1)
information signs. A variety of symbols Components Silicone-free
which conform to ISO 7010 are available in Ordering data
the CLIP PROJECT software. The markers
offer the following features: Description Color Type Order No.
Pcs. /
Pkt.
– High adhesive strength
UniSheet, with self-adhesive labels, 2-section,
– Suitable for indoor and outdoor use lettering field size: 104 x 70 mm
– The markers conform to the ISO 7010 white US-EMLF (104X70) 1014294 10
yellow US-EMLF (104X70) YE 1014295 10
international standard blue US-EMLF (104X70) BU 1014296 10
– The markers can be printed in various UniSheet, with self-adhesive labels, 1-section,
colors with the THERMOMARK CARD lettering field size: 104 x 140 mm
white US-EMLF (104X140) 1014291 10
PLUS yellow US-EMLF (104X140) YE 1014292 10
– When used in conjunction with high-qual- blue US-EMLF (104X140) BU 1014293 10
ity ink ribbons, a resistant form of labeling Accessories
is produced, which is even suitable for Magazine, for THERMOMARK CARD...,
harsh environments for accommodating all US-... materials
THERMOMARK CARD-US-MAG1 5146451 1
– The markers, which are supplied in uni- Segmented ink ribbon, length: 60 m, width: 110 mm
form sheets, can be labeled quickly, easily,
two segments in colors black/red TM-RIBBON 110-TC BK/RD 1014403 1
and cost-effectively using the three segments in colors black/red/yel- TM-RIBBON 110-TC BK/RD/YE 1014404 1
THERMOMARK CARD PLUS low
– The format automatically ensures printing four segments in colors black/red/blue/
yellow
TM-RIBBON 110-TC BK/RD/BU/YE 1014405 1

with a high level of positional accuracy

– The perforated markers are easy to
separate

354 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Marking and labeling - MARKING system
System marking
UniSheet - stick-on combi labels,
unprinted
P R I NT E D
F OR YOU
– All US-EMLF ... markers can also be
supplied labeled according to customer
requirements
Notes:
For matching label frames, see page 296.
1) For ordering example, see page 359.

Labeled according to customer specifications

Technical data
General data
Material PVC
Temperature range [°C] -40 ... 90
Wipe resistance DIN EN 61010-1 (VDE 0411-1)
Components Silicone-free

Ordering data

Pcs. /
Description Color Type Order No.
Pkt.
UniSheet, with self-adhesive labels, labeled according to cus-
tomer specifications, 2-section,
lettering field size: 104 x 70 mm1)
white US-EMLF (104X70) CUS 1014300 1
yellow US-EMLF (104X70) YE CUS 1014301 1
blue US-EMLF (104X70) BU CUS 1014302 1
UniSheet, with self-adhesive labels, labeled according to cus-
tomer specifications, 1-section,
lettering field size: 104 x 140 mm1)
white US-EMLF (104X140) CUS 1014297 1
yellow US-EMLF (104X140) YE CUS 1014298 1
blue US-EMLF (104X140) BU CUS 1014299 1

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 355

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Marking and labeling - MARKING system
System marking
Magnetic labels, unprinted Can be printed with:

2
1
1
2
Thermal transfer for rolls

Unlabeled

Technical data
General data
Can be printed with: THERMOMARK ROLL  THERMOMARK ROLL X1 
The PMM magnetic labels supplied in rolls THERMOMARK X1.1  THERMOMARK X1.2
Temperature range [°C] -30 ... 55
represent an individual and flexible marking Wipe resistance DIN EN 61010-1 (VDE 0411-1)
solution, e.g., for stock labeling. A variety of
Ordering data
symbols, linear and 2D codes are available in
the CLIP PROJECT software. The magnetic Description Color Type Order No.
Pcs. /
Pkt.
labels offer the following features:
– High adhesive strength Magnetic foil as continuous media, anisotropic,
1 roll = 15 m, label height: 20 mm
– Magnetic tape coated with polyester foil white PMM (EX20)R 1014303 1
– The flexible magnetic tape will also ad- silver PMM (EX20)R SR 1014304 1
yellow PMM (EX20)R YE 1014305 1
here to round objects with a radius of Magnetic foil as continuous media, anisotropic,
12 mm and higher 1 roll = 15 m, label height: 25 mm
white PMM (EX25)R 1014306 1
– The format automatically ensures printing silver PMM (EX25)R SR 1014307 1
with a high level of positional accuracy yellow PMM (EX25)R YE 1014308 1
– When used in conjunction with high-qual- Magnetic foil as continuous media, anisotropic,
1 roll = 15 m, label height: 30 mm
ity ink ribbons, a resistant form of labeling white PMM (EX30)R 1014309 1
is produced, which is even suitable for silver PMM (EX30)R SR 1014310 1
yellow PMM (EX30)R YE 1014311 1
harsh environments Magnetic foil as continuous media, anisotropic,
– The special packaging protects rolls that 1 roll = 15 m, label height: 40 mm
have already been started from the dirt white PMM (EX40)R 1014312 1
silver PMM (EX40)R SR 1014313 1
found in industrial environments yellow PMM (EX40)R YE 1014314 1
– Easy to assemble with the Magnetic foil as continuous media, anisotropic,
1 roll = 15 m, label height: 50 mm
THERMOMARK CUTTER white PMM (EX50)R 1014315 1
silver PMM (EX50)R SR 1014316 1
yellow PMM (EX50)R YE 1014317 1

356 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Marking and labeling - MARKING system
System marking
Magnetic labels, unprinted
P R I NT E D
F OR YOU
– All PMM... markers can also be supplied
labeled according to customer
requirements
Notes:
For matching label frames, see page 296.

Labeled according to customer specifications

Technical data
General data
Temperature range [°C] -30 ... 55
Wipe resistance DIN EN 61010-1 (VDE 0411-1)

Ordering data

Pcs. /
Description Color Type Order No.
Pkt.
Magnetic foil as continuous media, anisotropic, labeled according
to customer specifications, 1 roll = 15 m, label height: 20 mm

white PMM (EX20)R CUS 1014318 1

silver PMM (EX20)R SR CUS 1014319 1
yellow PMM (EX20)R YE CUS 1014320 1
Magnetic foil as continuous media, anisotropic, labeled according
to customer specifications, 1 roll = 15 m, label height: 25 mm

white PMM (EX25)R CUS 1014321 1

silver PMM (EX25)R SR CUS 1014322 1
yellow PMM (EX25)R YE CUS 1014323 1
Magnetic foil as continuous media, anisotropic, labeled according
to customer specifications, 1 roll = 15 m, label height: 30 mm

white PMM (EX30)R CUS 1014324 1

silver PMM (EX30)R SR CUS 1014325 1
yellow PMM (EX30)R YE CUS 1014326 1
Magnetic foil as continuous media, anisotropic, labeled according
to customer specifications, 1 roll = 15 m, label height: 40 mm

white PMM (EX40)R CUS 1014327 1

silver PMM (EX40)R SR CUS 1014328 1
yellow PMM (EX40)R YE CUS 1014329 1
Magnetic foil as continuous media, anisotropic, labeled according
to customer specifications, 1 roll = 15 m, label height: 50 mm

white PMM (EX50)R CUS 1014330 1

silver PMM (EX50)R SR CUS 1014331 1
yellow PMM (EX50)R YE CUS 1014332 1

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 357

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Marking and labeling - MARKING system
System marking

Ordering special marking

with CLIP PROJECT
Phoenix Contact offers a marking service P R I NT E D The materials which can be marked ac-
for all marking materials. We can provide you F OR YOU cording to customer requirements are indi-
with marking materials marked according to cated with this symbol on the product pages.
your requirements in next to no time.

Simply plan and place your order at

the click of a mouse

1. Create your marking quickly and easily

2. Use the clear preview to check your
marking
3. Then place your order directly from the
software

358 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Marking and labeling - MARKING system
System marking

Ordering special marking

by fax or e-mail

Minimum order amount: The following information must be

- Plastic sheets: 1 sheet provided when ordering marking: 1 2 3 4 5 6 7 ...
- Paper sheets: 1 sheet - Order number of the relevant
- Rolls: 1 strip (row), ...CUS material Marking direction “horizontal”
i.e., in the case of EML (20x8)R, - Marking text
for example, 4 labels - Font size
...

1
2
3
4
5
6
7
- Read direction “horizontal” or “vertical”
- Normal or bold print Marking direction “vertical”
- Please send special characters, sym-
bols, and logos as a bitmap file

P R I NT E D P R I NT E D
F OR YOU F OR YOU

120 markers for a terminal block width of 4.2 mm 96 markers for a terminal block width of 5.2 mm

Technical data Technical data

General data
Can be printed with: BLUEMARK LED  BLUEMARK CLED  CMS-P1-PLOTTER BLUEMARK LED  BLUEMARK CLED  CMS-P1-PLOTTER
Number of individual labels 120 96
Number of individual labels per strip 15 12
Material PA PA
Inflammability class according to UL 94 V2 V2
Temperature range [°C] -40 ... 120 -40 ... 120
Wipe resistance DIN EN 61010-1 (VDE 0411-1) DIN EN 61010-1 (VDE 0411-1)
Contents Free from silicone and halogen Free from silicone and halogen

Ordering data Ordering data

Pcs. / Pcs. /
Description Color Type Order No. Type Order No.
Pkt. Pkt.
UniCard, for marking terminal blocks with a marker groove

White UC-TM 4 0818111 10 UC-TM 5 0818108 10

Red UC-TM 4 RD 0818250 10 UC-TM 5 RD 0818302 10
Orange UC-TM 4 OG 0818221 10 UC-TM 5 OG 0818276 10
Yellow UC-TM 4 YE 0818234 10 UC-TM 5 YE 0818289 10
Violet UC-TM 4 VT 0819084 10 UC-TM 5 VT 0819107 10
Blue UC-TM 4 BU 0818247 10 UC-TM 5 BU 0818292 10
Green UC-TM 4 GN 0818263 10 UC-TM 5 GN 0818315 10
UniCard, for marking terminal blocks with a marker groove,
labeled according to customer specifications
White UC-TM 4 CUS 0824573 1 UC-TM 5 CUS 0824581 1
Red UC-TM 4 RD CUS 0824577 1 UC-TM 5 RD CUS 0824585 1
Orange UC-TM 4 OG CUS 0824576 1 UC-TM 5 OG CUS 0824584 1
Yellow UC-TM 4 YE CUS 0824579 1 UC-TM 5 YE CUS 0824587 1
Violet UC-TM 4 VT CUS 0824578 1 UC-TM 5 VT CUS 0824586 1
Blue UC-TM 4 BU CUS 0824574 1 UC-TM 5 BU CUS 0824582 1
Green UC-TM 4 GN CUS 0824575 1 UC-TM 5 GN CUS 0824583 1

Ordering example for UC-TM 5 GN

CUS Unit (sheet) Marking Order No.
Vertical consecutive numbering from 1 1 Numbers: 1 to 12 0824583
to 12 is required for 8 identical terminal Font size: 10 pt
strips with 5 mm pitch. The UC-TM 5 ... Read direction: Vertical
Normal printing
sheet has 8 strips, each of which has 12 in-
dividual labels. In this case order as follows:

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 359

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
360 PHOENIX CONTACT
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Hand tools - TOOL fox

The TOOL fox range of tools offers pro-    

Product range overview  
cessing and measuring tools for all electrical
engineering applications.    
Hand tools 362
The ergonomically designed tools for cut-
ting, stripping, crimping, screwing, and test-    
ing impress with their optimum handling CUTFOX ... cutting tools and UNIFOX ... universal
and quality. Specially hardened tool steels tools
ensure maximum durability.   Cable cutters 364 
Cutting machines, stripping machines, and   Cutting tools for special applications 366 
crimping machines are available which can
be used to automate steps.   Universal tools 368 
A wide range of connectors rounds off   Cable duct, profile, and DIN rail cutters 371 
the product range.    
MICROFOX electronics pliers 374

   
WIREFOX stripping tools

  Stripping tools 378 

  Stripping tools 384 
   
CRIMPFOX pressing and crimping tools 388

  CRIMPHANDY portable hand-held machine 390 

  Crimp pliers for ferrules 392 
  Crimping pliers for ring cable and tube lugs 398 

  Universal basic pliers for connectors up to 120 mm2 403 

  Crimping pliers for slip-on sleeves 404 

  Crimping pliers for turned contacts 406 
  Crimping pliers for coaxial, FO, D-SUB, CATV, data plugs, and 408 
solar connectors
  Universal basic pliers 412 
   
SCREWFOX screwdriver tools

  Screwdrivers 416 
  Cordless screwdrivers 425 
  Socket wrenches 430 
  Control cabinet keys 433 
   
TESTFOX measuring tools

  Voltage and continuity testers 434 

  Digital multimeters 435 
   
Tool sets 438
   
Connectors 444

PHOENIX CONTACT 361

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Tools - TOOL fox
Hand tools

Professional cutting Professional stripping Professional crimping with up to

25 percent less force

362 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Tools - TOOL fox
Hand tools

There is an optimum cable cutter available The comprehensive range of combination Profile cutters are available for rapid pro-
for every application. The various versions tools ensures all applications are covered. cessing of DIN rails and cable ducts without
enable professional processing of conduc- The safety tools, which feature 2-compo- chips or burrs. An optional hydraulic unit
tors and cables with a diameter of up to 100 nent slip-proof handles, are VDE-tested and can be attached to convert manual DIN rail
mm. All parts of the cable cutters that are marked according to DIN EN 60900. cutters into automatic ones.
subject to particular strain are tempered
and specially hardened.

The stripping tools can strip all types of The product innovation for switchgear The extensive range of professional
conductors and cables quickly, precisely and manufacturing – the CRIMPHANDY, a bat- crimping pliers can be used to process all
reliably. They adapt automatically to the tery-operated, portable hand-held machine. types of contact with a cross section of up
conductor cross section concerned. It strips and crimps the conductor in under to 120 mm2. The innovative design and er-
two seconds, resulting in time savings of 75%. gonomically shaped handles reduce the
forces required by up to 25 percent.

With their interchangeable dies, the With their precise torque-setting feature, Our multimeters, current pliers, and volt-
CRIMPFOX-M universal crimping pliers can the torque and cordless screwdrivers are age testers are high-quality measuring tools,
be used to process all kinds of contacts. The the perfect complement to the Phoenix which have been tested and approved in
dies can be changed quickly and easily with- Contact range of screw terminal blocks. accordance with national and international
out the need for additional tools. The wide range of hardened BIT screw- standards.
driver inserts makes the products suitable
for universal use.

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 363

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Tools - TOOL fox
Hand tools
CUTFOX cable cutters

– CUTFOX ... cable cutters for professional

cutting results
– Suitable for conductors with a max.
diameter of 18 mm
– Ergonomic grip design to eliminate fatigue
when working
– All parts of the cable cutters that are
subject to particular strain are tempered
or specially hardened
Cable cutters and electrician's scissors Up to a maximum conductor
diameter of 18 mm

Ordering data Ordering data

Pcs. / Pcs. /
Description   Type Order No. Type Order No.
Pkt. Pkt.
Cable cutter, for copper and aluminum up to a diameter of 12 mm
(up to 35 mm²)
CUTFOX 12 1212128 1
Cable cutter, angled, for copper and aluminum up to a diameter
of 18 mm (up to 50 mm²)
CUTFOX 18 1212129 1
Electrician's scissors, high cutting performance thanks to micro-
serrated cutting area, suitable for copper, aluminum, Kevlar fibers,
and plastic, two-component non-slip soft-grip handles, ergonomic
design, adjustable screw joint

CUTFOX-ES 1212621 1

CUTFOX one-handed ring cable cutters

– CUTFOX ... one-handed ring cable cut-

ters for professional cutting results
– Suitable for conductors with a diameter
of up to 52 mm
– With ratchet function for minimum effort
– Unlockable
– Superb cutting quality

Up to a maximum conductor Up to a maximum conductor

diameter of 50 mm, steel-armored diameter of 52 mm

Ordering data Ordering data

Pcs. / Pcs. /
Description   Type Order No. Type Order No.
Pkt. Pkt.
Ring cable cutter, with ratchet function, for copper and aluminum
up to a diameter of 50 mm, for steel-armored CU/AL cables,
for stranded steel cables up to a diameter of 12 mm

CUTFOX 50 STEEL 1212526 1

Ring cable cutter, with ratchet function, for copper and aluminum
up to a diameter of 45 mm (up to 300 mm²)

CUTFOX 45 1212132 1
Ring cable cutter, with ratchet function, for copper and aluminum
up to a diameter of 52 mm (up to 300 mm²)

CUTFOX 52 1212133 1

364 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Tools - TOOL fox
Hand tools
CUTFOX cable cutters

– CUTFOX ... cable cutters for professional

cutting results
– Suitable for conductors with a max.
diameter of 35 mm
– With ratchet function for minimum effort
– Ergonomic grip design to eliminate fatigue
when working
– All parts of the cable cutters that are
subject to particular strain are tempered
or specially hardened Up to a maximum conductor Up to a maximum conductor
diameter of 25 mm diameter of 35 mm

Ordering data Ordering data

Pcs. / Pcs. /
Description   Type Order No. Type Order No.
Pkt. Pkt.
Cable cutter, with ratchet function, for copper and aluminum up to
a diameter of 25 mm (up to 185 mm²)

CUTFOX 25 1212130 1
Cable cutter, with ratchet function, for copper and aluminum up to
a diameter of 35 mm (up to 300 mm²)

CUTFOX 35 1212131 1

CUTFOX two-handed ring cable cutters

– CUTFOX ... two-handed ring cable cut-

ters for professional cutting results
– Suitable for conductors with a diameter
of up to 100 mm
– With ratchet function for minimum effort
– Unlockable
– Superb cutting quality

Up to a maximum conductor Up to a maximum conductor diameter of

diameter of 62 mm 100 mm

Ordering data Ordering data

Pcs. / Pcs. /
Description   Type Order No. Type Order No.
Pkt. Pkt.
Two-handed ring cable cutter, with ratchet function, for copper
and aluminum up to a diameter of 62 mm (up to 750 mm²)

CUTFOX 62 1212134 1
Two-handed ring cable cutter, with ratchet function, for copper
and aluminum up to a diameter of 100 mm (up to 1400 mm²)

CUTFOX 100 1212135 1

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 365

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Tools - TOOL fox
Hand tools
Cutting tools for special applications

– The CUTFOX-FBS cutting tool is

suitable for cutting out individual bars
from FBS ... plug-in bridges
– Screw-on bridges can be cut to length
with the CUTFOX FB without crushing
them
– VDE-tested cutting tools made from
special high-grade tool steel
– Inductively hardened blades for long-term
stable cutting performance Front cutting tool for cutting out Cutting tool for screw-on bridges
plug-in and insertion bridges

 

Ordering data Ordering data

Pcs. / Pcs. /
Description   Type Order No. Type Order No.
Pkt. Pkt.
Cutting tool, for separating individual jumper bars from FBS ...
plug-in bridges and EB ... insertion bridges

CUTFOX-FBS 1212124 1
Bridge cutting tool, for cutting FBI ... fixed bridges to length

CUTFOX FB 1205985 1
Cable cutter, precision blade with macro-notching, for copper and
aluminum up to 50 mm², VDE 1000 V AC/1500 V DC tested

Cable cutter, precision blade with macro-notching, for copper and

aluminum up to 70 mm², VDE 1000 V AC/1500 V DC tested

Cable cutter, for laminated power rails/ribbed tape measuring up

to 6 x 16 x 0.8 mm, copper and aluminum cables with a diameter of
up to 50 mm, VDE 1000 V AC, 1500 V DC

Diagonal cutter, with optimized leverage,

VDE 1000 V AC/1500 V DC tested

Power diagonal cutter, with optimized leverage, also suitable for

piano wire, VDE 1000 V AC/1500 V DC tested

366 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Tools - TOOL fox
Hand tools

Cable cutter for conductors Cable cutter for conductors and ribbed tape Diagonal cutter, also suitable
with a diameter of up to 25 mm (VDE) with a diameter of up to 50 mm (VDE) for piano wire (VDE)

  

Ordering data Ordering data Ordering data

Pcs. / Pcs. / Pcs. /

Type Order No. Type Order No. Type Order No.
Pkt. Pkt. Pkt.

CUTFOX 16 VDE 1212126 1

CUTFOX 25 VDE 1212127 1

CUTFOX-LB VDE 1212527 1

CUTFOX-S VDE 1212207 1

CUTFOX-SP VDE 1212206 1

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 367

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Tools - TOOL fox
Hand tools
UNIFOX universal tools

– UNIFOX ... VDE-totally-insulated combi-

nation pliers in straight and angled versions
– Ergonomic grip design to eliminate fatigue
when working
– Excellent transmission ratios for excellent
gripping and cutting performance
– Noticeably less force required on the part
of the user

Combination pliers (VDE), straight Combination pliers (VDE), angled

Ordering data Ordering data

Pcs. / Pcs. /
Description Color Type Order No. Type Order No.
Pkt. Pkt.
Combination pliers, cross-notched grip area,
integrated M8 - M10 ring wrench, VDE 1000 V AC/1500 V DC
tested
black UNIFOX-C VDE 1212202 1
Combination pliers, angled design, with opening spring and
locking device, cross-notched grip area,
integrated M8 - M10 ring wrench,
VDE 1000 V AC/1500 V DC tested
black UNIFOX-CE VDE 1212203 1

UNIFOX universal tools

– Individually tested safety tools according

to DIN EN 60900 (VDE 0682-201)
– For working on or in the vicinity of live
parts up to 1000 V AC or 1500 V DC
– The tools feature ergonomic two-compo-
nent safety handles

Needle-nose pliers (VDE), straight Needle-nose pliers (VDE), curved and angled

Ordering data Ordering data

Pcs. / Pcs. /
Description Color Type Order No. Type Order No.
Pkt. Pkt.
Needle-nose pliers with cut, gripping surface toothed,
VDE 1000 V AC/ 1500 V DC tested
black UNIFOX-P VDE 1212204 1
Needle-nose pliers with cut, 45° bent, gripping surface toothed,
VDE 1000 V AC/ 1500 V DC tested

black UNIFOX-PC VDE 1212205 1

Needle-nose pliers, angled design, with opening spring and lock-
ing device, finely notched grip area, stripping possible for 1.5 mm²
and 2.5 mm², integrated M8 - M10 ring wrench,
VDE 1000 V AC/1500 V DC tested

black UNIFOX-PE VDE 1212529 1

368 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Tools - TOOL fox
Hand tools
UNIFOX universal tools

– UNIFOX ... VDE-totally-insulated flat-

nose, round-nose, and water pump pliers
– Notched grip areas
– Ergonomic grip design to eliminate fatigue
when working
– Excellent transmission ratios for optimum
gripping performance
– Forged die hardened in oil for maximum
durability
Flat-nose pliers (VDE) Water pump pliers

Ordering data Ordering data

Pcs. / Pcs. /
Description Color Type Order No. Type Order No.
Pkt. Pkt.
Flat-nose pliers, finely notched grip area,
VDE 1000 V AC/1500 V DC tested
black UNIFOX-F VDE 1212363 1
Round-nose pliers, finely notched grip area,
VDE 1000 V AC/1500 V DC tested
black UNIFOX-R VDE 1212364 1
Water pump pliers, with groove joint,
grip areas with dual notching, acc. to VDE ISO 8976

UNIFOX-WP 1212365 1

UNIFOX cable binder tools for plastic

and stainless steel cable binders

Ordering data

Pcs. /
Description   Type Order No.
Pkt.
Cable binder pliers, for plastic cable binders with a width
of 2.2 - 4.8 mm, for a material thickness of up to 1.6 mm

– Ergonomic tool for attaching and detach- UNIFOX-CT 4,8 1212475 1

Ergonomically designed grip with comfortable ten- UNIFOX-CT 4,8P 1212609 1
ing cable binders in a single operation sion force adjustment
– The infinitely adjustable tension force is
Cable binder pliers, for steel cable binders with a width of up to
indicated by a scale in the handle area 7.9 mm, for a material thickness of up to 0.3 mm
– When the tension force is reached, the UNIFOX-CT M 7,9 1212610 1

remainder is automatically severed for a

flush finish

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 369

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Tools - TOOL fox
Hand tools
UNIFOX universal tools

– Compact, ergonomically shaped pliers

– 3 inserts for rivet diameter of
2.4 - 3.2 mm, 4 mm, and 4.8 - 5.0 mm
– Special rivets are available for fixing RW...
and UW... high-current panel feed-
through terminal blocks that are specifi-
cally designed for terminal blocks
Notes:
For high-current feed-through terminal blocks see Catalog 1.
Blind rivet pliers Blind riveting with diameters of 2.4 to 5 mm

Ordering data Ordering data

Pcs. / Pcs. /
Description Color Type Order No. Type Order No.
Pkt. Pkt.
Blind rivet pliers
black UNIFOX-RVT M 1212476 1
Rivet, aluminum/steel,
rivet diameter/length 
2.4/8 mm, for UW 4... terminal blocks silver RVT-AL/ST 2,4L/8 3240548 500
3/6 mm silver RVT-AL/ST 3/6 3240504 500
3/8 mm silver RVT-AL/ST 3/8 3240505 500
3/10 mm silver RVT-AL/ST 3/10 3240506 500
3/12 mm, for UW 10..., UW 16..., and RW 5... ter- silver RVT-AL/ST 3/12 3240507 500
minal blocks
3.2/6 mm silver RVT-AL/ST 3,2/6 3240509 500
3.2/8 mm silver RVT-AL/ST 3,2/8 3240510 500
3.2/10 mm silver RVT-AL/ST 3,2/10 3240511 500
3.2/12 mm silver RVT-AL/ST 3,2/12 3240512 500
4/6 mm silver RVT-AL/ST 4/6 3240513 500
4/8 mm silver RVT-AL/ST 4/8 3240514 500
4/10 mm silver RVT-AL/ST 4/10 3240515 500
4/12 mm silver RVT-AL/ST 4/12 3240516 500
4/14 mm, for UW 25... and RW 8... terminal blocks silver RVT-AL/ST 4/14 3240517 500

4.8/6 mm silver RVT-AL/ST 4,8/6 3240518 500

4.8/8 mm silver RVT-AL/ST 4,8/8 3240519 500
4.8/10 mm silver RVT-AL/ST 4,8/10 3240520 500
4.8/12 mm silver RVT-AL/ST 4,8/12 3240521 500
4.8/14 mm   silver RVT-AL/ST 4,8/14 3240553 500
4.8/16 mm silver RVT-AL/ST 4,8/16 3240522 500

Accessories Accessories
Rivet nozzle, long, specially designed for 3240548 rivet

UNIFOX-RVT M/BIT 2,4L 1212477 1

370 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Tools - TOOL fox
Hand tools
Cable duct cutter

Technical data
Dimensions Width Length Height
[mm] - 245 -
General data
Weight [kg] 0.43

Ordering data
– Easy, burr-free cutting with minimum Pcs. /
Description Color Type Order No.
effort thanks to the special cutting Pkt.
geometry and optimum leverage Cable duct cutter
– Non-slip ergonomic grip black CUTFOX-CD 1212474 1

– With spring reset

– 45° limit stop
– 75 mm cutting width

Cable duct cutters

Technical data
Dimensions Width Length Height
[mm] 285 280 290
General data
Length of the measuring bar [mm] 1000
Length of the hand lever [mm] 500

Ordering data
– Leverage and special cutting geometry
enables easy, burr-free cutting Description Color Type Order No.
Pcs. /
Pkt.
with minimum effort
– Grip protection for safety Cable duct cutters
black PPS CD M 1207569 1
– Metric measuring rail with adjustable limit
stop Accessories
– 125 mm cutting width Replacement blade, for PPS CD M
PPS CD BLADE 1207572 1
– Material thickness of up to 2.5 mm Replacement counter support (grip protection), for PPS CD M

PPS CD M COHO 1208995 1

Workbench, with plywood panel 700 x 1200 x 50 mm, without
mounting screws and bore holes
PPS TABLE 1206285 1

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 371

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Tools - TOOL fox
Hand tools
Profile cutters

DIN rail cutter

Applied for:
GOST

Technical data
Dimensions Width Length Height
[mm] 150 60 180
– The PPS BASIC I/M is the lightweight General data
version of the profile cutters. It can be Weight [kg] 8.3
Length of the measuring bar [mm] 1000
used to process the popular NS 35/15, Length of the hand lever [mm] 590
NS 35/7,5, and NS 15 types of EN DIN Ordering data
rail, as well as the NLS-CU 3/10 neutral
busbar Description Color Type Order No.
Pcs. /
Pkt.
– The PPS STANDARD ... and PPS CLAS-
Profile cutter, for cutting standard DIN rails to length, NS 15 /
SIC ... can be equipped with two stamping NS 35/7,5 / NS 35/15, and for cutting the NLS-CU 3/10 neutral
bits for round holes or elongated holes busbar to length, with inch/metric measuring rail

– The PPS CLASSIC ... is the best choice if black PPS BASIC I/M 1207585 1
hole formats are changed on a frequent Profile cutter, for cutting and stamping holes in standard DIN rails,
NS 15 / NS 32 / NS 35/7,5 / NS 35/15, and for cutting the
basis. By simply folding open the upper NLS-CU 3/10 neutral busbar to length, can accommodate 2
part of the PPS..., the stamping bits can be stamping bits, with metric measuring rail, supplied without stamp-
ing bits
changed in no time at all black
Same as before, but with inch/metric measuring black
rail
Profile cutter, for cutting and stamping holes in standard DIN rails,
NS 15 / NS 32 / NS 35/7,5 / NS 35/15, and for cutting the
NLS-CU 3/10 neutral busbar to length, can accommodate 2
stamping bits, stamping bits are easily interchangeable, with metric
measuring rail, supplied without stamping bits
black
Same as before, but with inch/metric measuring black
rail

Accessories
Stamping insert, for elongated holes, longitudinal:
3.5 x 12 mm
4.5 x 12 mm
5.5 x 12 mm
6.5 x 15 mm
Stamping insert, for elongated holes, transverse:
3.5 x 12 mm
4.5 x 12 mm
5.5 x 12 mm
6.5 x 15 mm
Stamping bit, for bore holes
3.8 mm Ø
4.3 mm Ø
5.3 mm Ø
6.4 mm Ø
7.0 mm Ø
8.4 mm Ø
Hydraulic cylinder, for connection to an existing hydraulic system,
operating pressure of 160 - 220 bar, G 1/4" connection thread, with
spring reset

Workbench, with plywood panel 700 x 1200 x 50 mm, without

mounting screws and bore holes
PPS TABLE 1206285 1

372 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Tools - TOOL fox
Hand tools

DIN rail cutter with bore hole die DIN rail cutter with piercer and
quick change mechanism

Applied for: Applied for:

GOST GOST

Technical data Technical data

Width Length Height Width Length Height
180 100 220 250 100 230

19 19
1000 1000
1000 1000

Ordering data Ordering data

Pcs. / Pcs. /
Type Order No. Type Order No.
Pkt. Pkt.

PPS STANDARD M 1206175 1

PPS STANDARD I/M 1206230 1

PPS CLASSIC M 1206243 1

PPS CLASSIC I/M 1206256 1

Accessories Accessories

PPS-ST (3,5X12)L 1203563 1 PPS-ST (3,5X12)L 1203563 1

PPS-ST (4,5X12)L 1203534 1 PPS-ST (4,5X12)L 1203534 1
PPS-ST (5,5X12)L 1202603 1 PPS-ST (5,5X12)L 1202603 1
PPS-ST (6,5X15)L 1202593 1 PPS-ST (6,5X15)L 1202593 1

PPS-ST (3,5X12)Q 1203550 1 PPS-ST (3,5X12)Q 1203550 1

PPS-ST (4,5X12)Q 1203547 1 PPS-ST (4,5X12)Q 1203547 1
PPS-ST (5,5X12)Q 1203411 1 PPS-ST (5,5X12)Q 1203411 1
PPS-ST (6,5X15)Q 1203408 1 PPS-ST (6,5X15)Q 1203408 1

PPS-ST (3,8) 1204892 1 PPS-ST (3,8) 1204892 1

PPS-ST (4,3) 1202616 1 PPS-ST (4,3) 1202616 1
PPS-ST (5,3) 1202629 1 PPS-ST (5,3) 1202629 1
PPS-ST (6,4) 1202632 1 PPS-ST (6,4) 1202632 1
PPS-ST (7,0) 1204889 1 PPS-ST (7,0) 1204889 1
PPS-ST (8,4) 1202726 1 PPS-ST (8,4) 1202726 1

PPS HYDRAULIC CYL 1208924 1

PPS TABLE 1206285 1 PPS TABLE 1206285 1

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 373

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Tools - TOOL fox
Hand tools
MICROFOX electronic pliers Notes:
For technical data regarding cutting capacity,
see www.phoenixcontact.net/products.

Diagonal cutter, with chamfer

Ordering data

Pcs. /
Description   Type Order No.
Miniature precision pliers feature the fol- Pkt.

lowing: Electronic diagonal cutter, round head, with chamfer, with open-
ing spring
– Ergonomically designed two-component MICROFOX-SB 1212489 1
grip for fatigue-proof and non-slip use Electronic diagonal cutter, tapered head, angled (21°), without
chamfer, with opening spring
– Manufactured from high-grade special MICROFOX-SP 1212488 1
tool steel Electronic diagonal cutter, tapered head, without chamfer, with
– Opening spring for uniform, smooth opening spring, non-reflective phosphate-treated surface, punched
version
opening MICROFOX-SP-1 1212487 1
– Through-connected joint for permanent Electronic front cutter, without chamfer, with opening spring

stability and optimum distribution of

force Electronic front cutter, 20° angle, without chamfer, with opening
spring
– Mirror-polished and oiled metal surfaces,
which provide maximum rust protection Electronic needle-nose pliers, smooth grip, with opening spring

Cutting pliers
Electronic needle-nose pliers, 45° angle, smooth grip, with
– Additional inductive hardened cutting for opening spring
long-term, stable cutting performance
– Precision-ground for exact cutting appli- Electronic flat-nose pliers, smooth grip, with opening spring

cations with minimum effort

– Various head shapes, even for areas that Electronic round-nose pliers, smooth grip, with opening spring

are difficult to access

Gripping and bending pliers
– Smooth grip to prevent damage to com-
ponents when gripping and bending

374 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Tools - TOOL fox
Hand tools

Front cutter Needle-nose pliers Flat/round-nose pliers

  

Ordering data Ordering data Ordering data

Pcs. / Pcs. / Pcs. /

Type Order No. Type Order No. Type Order No.
Pkt. Pkt. Pkt.

MICROFOX-E 1212494 1

MICROFOX-EO 1212495 1

MICROFOX-P 1212491 1

MICROFOX-PC 1212492 1

MICROFOX-F 1212493 1

MICROFOX-R 1212490 1

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 375

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Tools - TOOL fox
Hand tools
MICROFOX ESD electronic pliers Notes:
For technical data regarding cutting capacity,
see www.phoenixcontact.net/products.
ESD

ESD diagonal cutter

Ordering data

Pcs. /
Description   Type Order No.
ESD MICROFOX pliers offer the follow- Pkt.

ing features: ESD electronic diagonal cutter, round head, without chamfer,
with opening spring
– The special conductive plastic grip en- MICROFOX-S ESD 1212480 1
sures slow and safe removal of electro- ESD electronic front cutter, without chamfer, with opening spring
static energy according to standards and
directives such as DIN EN 61340-5 ESD electronic needle-nose pliers, smooth grip, with opening
– Ergonomically designed two-component spring

grip for fatigue-proof and non-slip use ESD electronic needle-nose pliers, 45° angle, smooth grip, with
– Manufactured from high-grade special opening spring

tool steel ESD electronic flat-nose pliers, smooth grip, with opening spring
– Opening spring for uniform, smooth
opening ESD electronic round-nose pliers, smooth grip, with opening
– Screwed precision joint for permanent spring
stability and optimum results
– Mirror-polished and phosphate-treated
metal surfaces for optimum rust protec-
tion and no glare when working
Cutting pliers
– Additional inductive hardened cutting for
long-term, stable cutting performance
– Precision-ground for exact cutting appli-
cations with minimum effort
– Various head shapes, even for areas that
are difficult to access
Gripping and bending pliers
– Smooth grip to prevent damage to com-
ponents when gripping and bending

376 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Tools - TOOL fox
Hand tools

ESD ESD ESD

ESD front cutter ESD needle-nose pliers ESD flat/round-nose pliers

  

Ordering data Ordering data Ordering data

Pcs. / Pcs. / Pcs. /

Type Order No. Type Order No. Type Order No.
Pkt. Pkt. Pkt.

MICROFOX-E ESD 1212485 1

MICROFOX-P ESD 1212482 1

MICROFOX-PC ESD 1212483 1

MICROFOX-F ESD 1212484 1

MICROFOX-R ESD 1212481 1

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 377

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Tools - TOOL fox
Hand tools
WIREFOX stripping tools

– Ergonomically shaped pliers

– WIREFOX ... stripping pliers are charac-
terized by their mechanism that adjusts
automatically to all kinds of insulation and
conductor diameters
– Practical integrated wire cutter
– Highly adjustable limit stop
for the stripping length

0.08 - 2.5 mm² conductor cross section Conductor cross section of 0.1 - 4 mm²
for special applications

Technical data Technical data

Conductor/cable stripping range
Conductor / cable [mm2] / AWG 0.08 - 2.5 / 28 - 12 0.1 - 4 / 28 - 12
Stripping length up to ... [mm] 15 18
Wire cutter solid // stranded [mm2] / AWG 2.5 / 14 // 6 / 10 1.5 / 16 // 10 / 8

Ordering data Ordering data

Pcs. / Pcs. /
Description Color Type Order No. Type Order No.
Pkt. Pkt.
Stripping tool, angled design, for cables and conductors with a
cross section of 0.08 mm - 2.5 mm², self-adjusting, stripping length
of up to 15 mm, cutting capacity: solid up to 2.5 mm², stranded up
to 6 mm²

Black WIREFOX 2,5 1212368 1

Stripping tool, angled shape, for cables and conductors (specifi-
cally also intended for
rubber and other kinds of special insulation) from 0.1 mm - 4 mm²,
self-adjusting, stripping length of up to 18 mm, cutting capacity:
solid up to 1.5 mm², stranded up to 10 mm²
Black/green WIREFOX-E 4 1212704 1
Stripping tool, angled shape, for cables and conductors (specifi-
cally also intended for
short-circuit-proof cables) from 1.5 mm - 6 mm², self-adjusting,
stripping length of up to 18 mm, cutting capacity: solid up to
1.5 mm², stranded up to 10 mm²
Black/green
Stripping tool, angled design, for cables and conductors from
0.02 mm - 10 mm², self-adjusting, stripping length of up to 18 mm,
cutting capacity: solid up to 1.5 mm², stranded up to 10 mm²

Black/green
Stripping tool, angled design, for cables and conductors from
4 mm - 16 mm², self-adjusting, stripping length of up to 18 mm,
cutting capacity: solid up to 1.5 mm², stranded up to 10 mm²

Black/green

Accessories Accessories
Spare knife
WIREFOX 2,5/SB 1212369 1 WIREFOX 4/SB 1212151 1
Spare limit stop
WIREFOX 2,5/WS 1212370 1

378 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Tools - TOOL fox
Hand tools

Conductor cross section of 1.5 - 6 mm², 0.02 - 10 mm² conductor cross section 4 - 16 mm² conductor cross section
short-circuit-proof cables

Technical data Technical data Technical data

1.5 - 6 / 16 - 8 0.02 - 10 / 34 - 8 4 - 16 / 12 - 5
18 18 18
1.5 / 16 // 10 / 8 1.5 / 16 // 10 / 8 1.5 / 16 // 10 / 8

Ordering data Ordering data Ordering data

Pcs. / Pcs. / Pcs. /

Type Order No. Type Order No. Type Order No.
Pkt. Pkt. Pkt.

WIREFOX-E 6SC 1212705 1

WIREFOX-E 10 1212706 1

WIREFOX-E 16 1212707 1

Accessories Accessories Accessories

WIREFOX 6SC/SB 1212314 1 WIREFOX 10/SB 1212152 1 WIREFOX 16/SB 1212153 1

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 379

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Tools - TOOL fox
Hand tools
WIREFOX stripping tools

Conductor cross section of 0.1 - 4 mm²

for special applications

Technical data
Conductor/cable stripping range
Conductor / cable [mm2] / AWG 0.1 - 4 / 28 - 12
– Ergonomically shaped pliers Stripping length up to ... [mm] 18
– WIREFOX ... stripping pliers are charac- Wire cutter solid // stranded [mm2] / AWG 1.5 / 16 // 10 / 8

terized by their mechanism that adjusts Ordering data

automatically to all kinds of insulation and Pcs. /
conductor diameters Description Color Type Order No.
Pkt.
– Practical integrated wire cutter Stripping tool, for cables and conductors (specifically also
– Highly adjustable limit stop intended for rubber and other kinds of special insulation) with a
cross section of 0.1 - 4 mm², self-adjusting, stripping length of up
for the stripping length to 18 mm, cutting capacity: solid up to 1.5 mm², stranded up to
10 mm²
Black/green WIREFOX 4 1212156 1
Stripping tool, for cables and conductors (specifically for short-
circuit-proof cables) of 1.5 - 6 mm², self-adjusting, stripping length
of up to 18 mm, cutting capacity: solid up to 1.5 mm², stranded up
to 10 mm²

Black/green
Stripping tool, for 0.02 - 10 mm² cables and conductors, self-
adjusting, stripping length up to 18 mm, cutting capacity: solid up to
1.5 mm², stranded up to 10 mm²

Black/green
Stripping tool, for cables and conductors of 4 - 16 mm², self-
aligned, stripping length up to 18 mm, cutting capacity: solid up to
1.5 mm², stranded up to 10 mm²

Black/green

Accessories
Spare knife
WIREFOX 4/SB 1212151 1

380 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Tools - TOOL fox
Hand tools

Conductor cross section of 1.5 - 6 mm², 0.02 - 10 mm² conductor cross section 4 - 16 mm² conductor cross section
short-circuit-proof cables

  

Technical data Technical data Technical data

1.5 - 6 / 16 - 8 0.02 - 10 / 34 - 8 4 - 16 / 12 - 5
18 18 18
1.5 / 16 // 10 / 8 1.5 / 16 // 10 / 8 1.5 / 16 // 10 / 8

Ordering data Ordering data Ordering data

Pcs. / Pcs. / Pcs. /

Type Order No. Type Order No. Type Order No.
Pkt. Pkt. Pkt.

WIREFOX 6SC 1212158 1

WIREFOX 10 1212150 1

WIREFOX 16 1212155 1

Accessories Accessories Accessories

WIREFOX 6SC/SB 1212314 1 WIREFOX 10/SB 1212152 1 WIREFOX 16/SB 1212153 1

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 381

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Tools - TOOL fox
Hand tools
WIREFOX stripping tools

– WIREFOX ... stripping pliers are charac-

terized by their mechanism that adjusts
automatically to all kinds of insulation and
conductor diameters

Conductor cross section of 6 - 16 mm², 8 - 9 mm conductor diameter

any stripping length

 

Technical data Technical data

Conductor/cable stripping range
Conductor / cable [mm2] / AWG 6 - 16 / 10 - 5 -/-

Ordering data Ordering data

Pcs. / Pcs. /
Description Color Type Order No. Type Order No.
Pkt. Pkt.
Stripping pliers, for cables and conductors with a cross section of
6 - 16 mm², self-adjusting, any stripping length, also suitable for
sensor/actuator cables

black WIREFOX 16-1 1212157 1

Stripping pliers, for halogen-free sensor/actuator cables (SAC
cables), with PUR and PVC insulation, for diameters from 4.4 mm
to 7 mm, any stripping length

black WIREFOX SAC 1212623 1

Stripping pliers, for removing jackets from cables for cable cut-
outs, cable tap-offs, and shield connections with a diameter of 8 -
 9 mm, insulation thickness of up to 1.2 mm, stripping lengths of
20 mm and above

black WIREFOX-D SHIELD 1212172 1

Stripping pliers, for 0.75 - 2.5 mm² flat cables up to 15 mm wide,
any stripping length

black
Stripping pliers, for AS interface flat wires, any desired stripping
length
black
Stripping pliers, for stripping conductors with a cross section of
up to 10 mm², VDE-tested
black
Multifunction stripping tool, for removing the jacket from cables
with a diameter of 8 to 13 mm, for stripping cables with a cross sec-
tion of 0.2 to 10 mm², with full-fledged diagonal cutter,
VDE 1000 V AC/1500 V DC tested

black

Accessories Accessories
Spare knife
WIREFOX 16-1/SB 1204944 1

382 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Tools - TOOL fox
Hand tools

For flat cables Conductor cross section of 0.2 - 10 mm², (VDE) Multifunctional tool

  

Technical data Technical data Technical data

0.75 - 2.5 / 18 - 12 0.2 - 10 / 24 - 8 0.2 - 10 / 24 - 8

Ordering data Ordering data Ordering data

Pcs. / Pcs. / Pcs. /

Type Order No. Type Order No. Type Order No.
Pkt. Pkt. Pkt.

WIREFOX FC 1212619 1

WIREFOX ASI 1212154 1

WIREFOX 10 VDE 1212366 1

WIREFOX-MP VDE 1212528 1

Accessories Accessories Accessories

WIREFOX ASI/SB 1208076 1

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 383

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Tools - TOOL fox
Hand tools
WIREFOX stripping tools

Conductor diameter of 2.5 - 11 mm

Ordering data

Pcs. /
Description Color Type Order No.
– Large selection of precision stripping Pkt.

tools Stripping tool, for stripping multicore signal, control, and fiber-
glass wires of 2.5 - 11 mm Ø, insulation thickness up to 1 mm
– The right tool for every application
– Possible to strip conductors and cables black WIREFOX-D 11 1212160 1
Stripping tool, for stripping installation cables with 8 - 13 mm Ø,
with all kinds of insulation for example, NYM 3x1.5 mm² to NYM 5x2.5 mm², single-wire strip-
up to a diameter of 40 mm ping, 0.2  - 4 mm², with blade for lateral cutting and extendable
knife

black
Stripping tool, for stripping cables (especially fiber optic cables) of
4 - 16 mm Ø

black
Stripping tool, for stripping wires of 8 - 28 mm Ø

black
Stripping tool, for stripping cables of 4.5 - 40 mm Ø, insulation
strength up to 4.5 mm, swiveling knife for round, longitudinal and
spiral cuts

black

Accessories
Spare knife
WIREFOX-D 11/SB 1212312 1

384 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Tools - TOOL fox
Hand tools

Conductor diameter of 8 - 13 mm Conductor diameter of 4 - 40 mm

 

Ordering data Ordering data

Pcs. / Pcs. /
Type Order No. Type Order No.
Pkt. Pkt.

WIREFOX-D 13 1212162 1

WIREFOX-D 16 1212173 1

WIREFOX-D 28 1212174 1

WIREFOX-D 40 1212161 1

Accessories Accessories

WIREFOX-D 40/SB 1212313 1

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 385

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Tools - TOOL fox
Hand tools
WIREFOX stripping tools
l1 l3

l1 l2 l3

For coaxial cables,

conductor diameter of 2.5 - 7.6 mm

Ordering data

Pcs. /
Description Color Type Order No.
– Large selection of precision stripping Pkt.

tools Stripping tool, for coaxial cables of 2.5 - 7.6 mm Ø

– The right tool for every application 2-stage, setting dimension l1 = 6.0 mm black WIREFOX-D CX-1 1212163 1
– Possible to strip conductors and cables 2-stage, setting dimension l1 = 9.2 mm black WIREFOX-D CX-2 1212164 1
with all kinds of insulation 2-stage, setting dimension 1 = 12 mm black WIREFOX-D CX-3 1212165 1
2-stage, setting dimension l1 = 6.8 mm black WIREFOX-D CX-4 1212166 1
up to a diameter of 40 mm 3-stage, setting dimension l1 = 5.5 mm, black WIREFOX-D CX-5 1212167 1
l2 = 5.5 mm
3-stage, setting dimension l1 = 2.7 mm, black WIREFOX-D CX-6 1212168 1
l2 = 8.3 mm
3-stage, setting dimension l1 = 6.0 mm, black WIREFOX-D CX-7 1212169 1
l2 = 6.0 mm
3-stage, setting dimension l1 = 2.5 mm, black WIREFOX-D CX-8 1212170 1
l2 = 6.8 mm
3-stage, setting dimension l1 = 3.5 mm, black WIREFOX-D CX-9 1212171 1
l2 = 7.5 mm
Stripping tool, for standard 2.5, 4, and 6 mm² solar cables, with
15 mm length stop, for SUNCLIX plug-in connectors

black
Stripping tool, for 2.5 - 6 mm² solar cables, 8.5 mm stripping
length, for MC3, MC4 and SOLARLOK contacts

black
Stripping tool, for CATV type F, stripping length: 6.35 mm

black

Accessories
Spare knife
WIREFOX-D CX-1/SB 1212303 1
WIREFOX-D CX-2/SB 1212304 1
WIREFOX-D CX-3/SB 1212305 1
WIREFOX-D CX-4/SB 1212306 1
WIREFOX-D CX-5/SB 1212307 1
WIREFOX-D CX-6/SB 1212308 1
WIREFOX-D CX-7/SB 1212309 1
WIREFOX-D CX-8/SB 1212310 1
WIREFOX-D CX-9/SB 1212311 1

386 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Tools - TOOL fox
Hand tools

For solar cables, For coaxial cables, RG 59 and RG 6

conductor cross section of 2.5 - 6 mm²

Ordering data Ordering data

Pcs. / Pcs. /
Type Order No. Type Order No.
Pkt. Pkt.

WIREFOX-D SR 6-1 1212511 1

WIREFOX-D SR 6 1212507 1

WIREFOX-CX 6,35 1212733 1

Accessories Accessories

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 387

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Tools - TOOL fox
Hand tools

CRIMPHANDY - portable hand-held machine. Stripping and crimping in just one step.

Simply insert the conductor, ... ... stripping and crimping is carried out ... and you're done.
automatically, ...

388 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Tools - TOOL fox
Hand tools

Easy operation thanks to the automatic Automatic cross-section monitoring pre- Quadratic crimping can be used for all
stripping and crimping function. The device vents faulty crimping as a result of incorrect terminal points and terminal shafts. Here
signals the operating states clearly by means cross sections. The device displays a corre- the pull-out forces exceed the specified
of colored LEDs. sponding message. standard conditions.

Integrated magazine for ferrules in strip Easy to remove collecting chamber for Integrated lithium-ion polymer recharge-
form. The automatic feed enables multiple discarded insulation. This guarantees a clean able battery for 2000 crimps. The fast char-
conductors to be crimped one after working environment. The device can ger provided charges the battery, which is
another without interruption. therefore also be used inside the control easy to replace, in just 60 minutes.
cabinet.

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 389

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Tools - TOOL fox
Hand tools
CRIMPHANDY, portable hand-held Notes:
machine, for a 1.0 mm2 conductor An application video can be found in the download area for the rel-
cross section evant product on our website at www.phoenixcontact.net/products.

1.0 mm² conductor cross section

Technical data
Dimensions Width Length Height
[mm] 42 200 67
The product innovation for switchgear General data
manufacturing – the CRIMPHANDY. With Weight [kg] 0.43
Conductor [mm2] 1-1
this portable hand-held machine, you can Working cycle [s] 2
strip and crimp your conductors in under Compression Square crimp
two seconds – 75% less time than before. Ordering data
– The matching reel ferrules are suitable for
Pcs. /
use on all modular terminal blocks, Description   Type Order No.
Pkt.
particularly those from the Portable hand-held machine, battery-powered, for ferrules,
CLIPLINE complete system: 1.0 mm², incl. battery and charger, 100 -240 V,
in a robust aluminum case
– UT screw connection terminal blocks For standard PVC and PE conductors CF CRIMPHANDY 1,0 1212465 1
– ST spring-cage connection terminal
Accessories
blocks
Reel ferrules, 1.0 mm², 8 mm, with plastic sleeve,
– PT push-in connection terminal blocks according to DIN 46228-4, red, 50 pieces per strip
– COMBI plug-in connection solutions
AI 1,0-8 RD-S 1212523 50
Replacement battery, for CF CRIMPHANDY...,
Li-ion 7.4 V, 0.76 Ah
CF CRIMPHANDY/ACCU 1212518 1
Replacement charger, for CF CRIMPHANDY...,
100 - 240 V AC
CF CRIMPHANDY/CHARGER 1212519 1

390 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Tools - TOOL fox
Hand tools
CRIMPHANDY, portable hand-held Notes:
machine, for a 1.5 mm2 conductor An application video can be found in the download area for the rel-
cross section evant product on our website at www.phoenixcontact.net/products.

1.5 mm² conductor cross section

Technical data
Dimensions Width Length Height
[mm] 42 200 67
The product innovation for switchgear General data
manufacturing – the CRIMPHANDY. With Weight [kg] 0.43
Conductor [mm2] 1.5 - 1.5
this portable hand-held machine, you can Working cycle [s] 2
strip and crimp your conductors in under Compression Square crimp
two seconds – 75% less time than before. Ordering data
– The matching reel ferrules are suitable for
Pcs. /
use on all modular terminal blocks, partic- Description   Type Order No.
Pkt.
ularly those from the CLIPLINE com- Portable hand-held machine, battery-powered, for ferrules,
plete system: 1.5 mm², incl. battery and charger, 100 - 240 V,
in a robust aluminum case
– UT screw connection terminal blocks For standard PVC and PE conductors CF CRIMPHANDY 1,5 1212466 1
– ST spring-cage connection terminal
Accessories
blocks
Reel ferrules, 1.5 mm², 8 mm, with plastic sleeve,
– PT push-in connection terminal blocks according to DIN 46228-4, red, 50 pieces per strip
– COMBI plug-in connection solutions
AI 1,5-8 BK-S 1212524 50
Replacement battery, for CF CRIMPHANDY...,
Li-ion 7.4 V, 0.76 Ah
CF CRIMPHANDY/ACCU 1212518 1
Replacement charger, for CF CRIMPHANDY...,
100 - 240 V AC
CF CRIMPHANDY/CHARGER 1212519 1

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 391

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Tools - TOOL fox
Hand tools
CRIMPFOX crimping pliers for ferrules

0.25 - 2.5 mm² conductor cross section

Technical data
Application range
Conductor [mm2] / AWG 0.25 - 2.5 / 24 - 12
– Extensive range of crimping pliers Compression Trapezoidal crimp
– All ferrules can be optimally crimped with Ordering data
a minimum amount of effort even in the
Pcs. /
case of large conductor cross sections Description   Type Order No.
Pkt.
– Consistently high crimping quality Crimping pliers, compact pliers, for ferrules according to DIN
– Unlockable pressure lock 46228-1 and DIN 46228-4, unlockable pressure lock, lateral entry
– Marked die stations for precise process- CRIMPFOX 2,5-M 1212719 1
ing of the relevant cross sections Crimping pliers, for ferrules as per DIN 46228-1 and DIN 46228-4,
five marked die stations, pressure lock can be released, lateral
CRIMPFOX 6S .../ ...T entry
– Self-adjusting die automatically adapts to
the connector size Crimping pliers, compact pliers, for ferrules according to DIN
46228-1 and DIN 46228-4, unlockable pressure lock, lateral entry
– Bound to impress thanks to the quick and
reliable contact processing method
– Ergonomically designed handles ensure an Crimping pliers, for ferrules as per DIN 46228-1 and DIN 46228-4,
self-adjusting die, pressure lock can be released, front entry
optimum grip and help avoid fatigue when
working
Accessories
Replacement die

Replacement recuperating spring

CRIMPFOX/ SPR-1 1212069 1

392 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Tools - TOOL fox
Hand tools

0.25 - 6 mm² conductor cross section 0.25 - 6 mm² conductor cross section 0.5 - 6 mm² conductor cross section

 

Technical data Technical data Technical data

0.25 - 6 / 24 - 10 0.25 - 6 / 24 - 10 0.5 - 6 / 20 - 10

Trapezoidal crimp Trapezoidal crimp Square crimp

Ordering data Ordering data Ordering data

Pcs. / Pcs. / Pcs. /

Type Order No. Type Order No. Type Order No.
Pkt. Pkt. Pkt.

CRIMPFOX 6 1212034 1

CRIMPFOX 6-M 1212720 1

CRIMPFOX 6S-F 1212043 1

Accessories Accessories Accessories

CRIMPFOX 6/DIE 1212035 1

CRIMPFOX/ SPR-3 1212036 1 CRIMPFOX/ SPR-1 1212069 1 CRIMPFOX/ SPR-3 1212036 1

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 393

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Tools - TOOL fox
Hand tools
CRIMPFOX crimping pliers for ferrules

0.25 - 6 mm² conductor cross section

Technical data
Application range
Conductor [mm2] / AWG 0.25 - 6 / 24 - 10
– Extensive range of crimping pliers Compression Trapezoidal crimp
– All ferrules can be optimally crimped with Ordering data
a minimum amount of effort even in the
Pcs. /
case of large conductor cross sections Description   Type Order No.
Pkt.
– Consistently high crimping quality Crimping pliers, for ferrules as per DIN 46228-1 and DIN 46228-4,
– Unlockable pressure lock self-adjusting die, pressure lock can be released, lateral entry
– Marked die stations for precise process-
ing of the relevant cross sections CRIMPFOX 6T 1212037 1
Crimping pliers, for ferrules as per DIN 46228-1 and DIN 46228-4,
CRIMPFOX 6S .../ ...T self-adjusting die, pressure lock can be released, front entry
– Self-adjusting die automatically adapts to
the connector size
Crimping pliers, compact pliers, for ferrules according to DIN
– Bound to impress thanks to the quick and 46228-1 and DIN 46228-4, unlockable pressure lock, lateral entry
reliable contact processing method
– Ergonomically designed handles ensure an
optimum grip and help avoid fatigue when Accessories
working Replacement recuperating spring
CRIMPFOX/ SPR-1 1212069 1

394 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Tools - TOOL fox
Hand tools

0.25 - 6 mm² conductor cross section 4 - 10 mm² conductor cross section

Technical data Technical data

0.25 - 6 / 24 - 10 4 - 10 / 12 - 8
Trapezoidal crimp Trapezoidal crimp

Ordering data Ordering data

Pcs. / Pcs. /
Type Order No. Type Order No.
Pkt. Pkt.

CRIMPFOX 6T-F 1212038 1

CRIMPFOX 10 1212721 1

Accessories Accessories

CRIMPFOX/ SPR-1 1212069 1 CRIMPFOX/ SPR-1 1212069 1

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 395

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Tools - TOOL fox
Hand tools
CRIMPFOX crimping pliers for ferrules

– These compact crimping pliers have been

designed to reduce effort when working
– The way in which the handles and the die
are arranged means that the ferrules can
be fitted however the tool is held
Notes:
For matching ferrules, cable lugs, and flat plugs, see page 444
onwards.

0.14 - 10 mm² conductor cross section 0.14 - 6 mm² conductor cross section

 

Technical data Technical data

Application range
Conductor [mm2] / AWG 0.14 - 10 / 25 - 7 0.14 - 6 / 25 - 10
Compression Square crimp HEX crimp

Ordering data Ordering data

Pcs. / Pcs. /
Description   Type Order No. Type Order No.
Pkt. Pkt.
Crimping pliers, for ferrules as per DIN 46228, 0.14 - 10 mm²,
pressure lock can be released, lateral entry

CRIMPFOX 10S 1212045 1

Crimping pliers, for ferrules as per DIN 46228, 0,14 - 6 mm²,
pressure lock can be released, lateral entry

CRIMPFOX 6H 1212046 1

Accessories Accessories
Replacement recuperating spring
CRIMPFOX/SPR-2 1212047 1 CRIMPFOX/SPR-2 1212047 1

396 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Tools - TOOL fox
Hand tools
CRIMPFOX crimping pliers for ferrules

– These crimping pliers can be used to pro-

cess ferrules measuring up to 50 mm2
– Ergonomically designed handles ensure an
optimum grip and reduce the amount of
force required by 25 percent
Notes:
For matching ferrules, cable lugs, and flat plugs, see page 444
onwards.

10 - 25 mm² conductor cross section 35 - 50 mm² conductor cross section

 

Technical data Technical data

Application range
Conductor [mm2] / AWG 10 - 25 / 8 - 4 35 - 50 / 2 - 1
Compression WM crimp WM crimp

Ordering data Ordering data

Pcs. / Pcs. /
Description   Type Order No. Type Order No.
Pkt. Pkt.
Crimping pliers, for ferrules as per DIN 46228-1 and DIN 46228-4,
three marked die stations, pressure lock can be released,
lateral entry

CRIMPFOX 25R 1212039 1

Crimping pliers, for ferrules as per DIN 46228-1 and DIN 46228-4,
two marked die stations, pressure lock can be released,
lateral entry

CRIMPFOX 50R 1212041 1

Accessories Accessories
Replacement die
CRIMPFOX 25R/DIE 1212040 1 CRIMPFOX 50R/DIE 1212042 1
Replacement recuperating spring
CRIMPFOX/ SPR-1 1212069 1 CRIMPFOX/ SPR-1 1212069 1

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 397

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Tools - TOOL fox
Hand tools
CRIMPFOX crimping pliers
for cable lugs and connectors

– Unlockable pressure lock

– They unlock as soon as the required
crimping pressure is attained, thus ruling
out the possibility of too little pressure
– The color coded dies clearly indicate the
cross section
Notes:
For matching ferrules, cable lugs, and flat plugs, see page 444
onwards.
For replacement dies and retaining springs, go to the product area 0.14 - 1 mm² conductor cross section 0.75 - 2.5 mm² conductor cross section
on the website at www.phoenixcontact.net/products.

 

Technical data Technical data

Application range
Conductor [mm2] / AWG 0.14 - 1 / 26 - 18 0.75 - 2.5 / 20 - 14
Compression Oval crimp Oval crimp

Ordering data Ordering data

Pcs. / Pcs. /
Description   Type Order No. Type Order No.
Pkt. Pkt.
Crimping pliers, for insulated cable lugs (light green, red), three
marked die stations, pressure lock can be released, lateral entry

CRIMPFOX-RCI 1 1212055 1
Crimping pliers, compact pliers, for insulated cable lugs
(light green, red), three marked die stations, unlockable pressure
lock, lateral entry

CRIMPFOX-RCI 1-M 1212727 1

Crimping pliers, for insulated cable lugs (red, blue), two marked
die stations, pressure lock can be released, lateral entry

CRIMPFOX-RCI 2,5 1212053 1

Crimping pliers, compact pliers, for insulated cable lugs
(red, blue), two marked die stations, unlockable cable lug, lateral
entry

CRIMPFOX-RCI 2,5-M 1212728 1

Crimping pliers, for symmetrical insulated cable lugs
(red, blue, yellow), three marked die stations, pressure lock can be
released, lateral entry

Crimping pliers, compact pliers, for symmetrical insulated cable

lugs (red, blue, yellow), three marked die stations,
unlockable pressure lock, lateral entry

Crimping pliers, compact pliers, for symmetrical insulated DIN

cable lugs (red, blue, yellow), three marked die stations,
unlockable pressure lock, lateral entry

Crimping pliers, for asymmetrical insulated cable lugs

(red, blue, yellow), three marked die stations,
pressure lock can be released, lateral entry

Crimping pliers, compact pliers, for fully insulated butt connectors

(red, blue, yellow), three marked die stations, unlockable pressure
lock, lateral entry

398 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Tools - TOOL fox
Hand tools

0.75 - 6 mm² conductor cross section 0.75 - 6 mm² conductor cross section 0.5 - 6 mm² conductor cross section

 

Technical data Technical data Technical data

0.75 - 6 / 20 - 10 0.75 - 6 / 20 - 10 0.5 - 6 / 20 - 10

Oval crimp Oval crimp Oval crimp

Ordering data Ordering data Ordering data

Pcs. / Pcs. / Pcs. /

Type Order No. Type Order No. Type Order No.
Pkt. Pkt. Pkt.

CRIMPFOX-RCI 6 1212057 1

CRIMPFOX-RCI 6-M 1212730 1

CRIMPFOX-RCI DIN 6 1212729 1

CRIMPFOX-RCI 6-1 1212059 1

CRIMPFOX-HS 6 1212722 1

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 399

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Tools - TOOL fox
Hand tools
CRIMPFOX crimping pliers
for uninsulated cable lugs

– For processing uninsulated cable lugs

– Compact and lightweight design
– Unlockable pressure lock
– Marked die stations for precise process-
ing of the relevant cross sections
Notes:
For matching ferrules, cable lugs, and flat plugs, see page 444
onwards.
For replacement dies and retaining springs,
visit www.phoenixcontact.net/products. 0.75 - 2.5 mm² conductor cross section 0.5 - 6 mm² conductor cross section

Technical data Technical data

Application range
Conductor [mm2] / AWG 0.75 - 2.5 / 22 - 14 0.5 - 6 / 20 - 10
Compression Indent crimp Indent crimp

Ordering data Ordering data

Pcs. / Pcs. /
Description   Type Order No. Type Order No.
Pkt. Pkt.
Crimping pliers, for uninsulated cable lugs,
three marked die stations, pressure lock can be released,
lateral entry
CRIMPFOX-RC 2,5 1212063 1
Crimping pliers, compact pliers, for uninsulated cable lugs,
three marked die stations, unlockable pressure lock, lateral entry

CRIMPFOX-RC 2,5-M 1212723 1

Crimping pliers, compact pliers, for uninsulated cable lugs,
two marked die stations, unlockable pressure lock, lateral entry

CRIMPFOX-RC 6-M 1212724 1

Crimping pliers, for uninsulated cable lugs,
two marked die stations, unlockable pressure lock, lateral entry

Crimping pliers, for uninsulated cable lugs,

three marked die stations, unlockable pressure lock, lateral entry

400 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Tools - TOOL fox
Hand tools

0.5 - 6 mm² conductor cross section 4 - 10 mm² conductor cross section 10 - 25 mm² conductor cross section

 

Technical data Technical data Technical data

0.5 - 6 / 20 - 10 4 - 10 / 12 - 8 10 - 25 / 8 - 4
Indent crimp Indent crimp Indent crimp

Ordering data Ordering data Ordering data

Pcs. / Pcs. / Pcs. /

Type Order No. Type Order No. Type Order No.
Pkt. Pkt. Pkt.

CRIMPFOX-RC 6 1212710 1

CRIMPFOX-RC 10 1212061 1 CRIMPFOX-RC 25 1212065 1

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 401

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Tools - TOOL fox
Hand tools
CRIMPFOX crimping pliers
for uninsulated tube lugs

– For processing uninsulated tube lugs

– Compact and lightweight design
– Unlockable pressure lock
– Consistently high crimping quality
– Ergonomically designed handles ensure an
optimum grip and help avoid fatigue when
working

4 - 16 mm² conductor cross section 10 - 70 mm² conductor cross section

Technical data Technical data

Application range
Conductor [mm2] / AWG 4 - 16 / 4 - 12 10 - 70 / 8 - 00
Compression Indent crimp Indent crimp

Ordering data Ordering data

Pcs. / Pcs. /
Description   Type Order No. Type Order No.
Pkt. Pkt.
Crimping pliers, for standard, uninsulated tube lugs, three marked
die stations

CRIMPFOX-RCT 16 1212731 1
Crimping pliers, for standard, uninsulated tube lugs, three marked
die stations, unlockable pressure lock, lateral entry, 10 - 25 mm²
conductor cross section, crimping: HEX crimp

CRIMPFOX-RCT 25-1 1212066 1

Crimping pliers, for standard, uninsulated tube lugs, with rotatable
die, 5 stations, 10 - 70 mm² conductor cross section

CRIMPFOX-RCT 70 1212732 1

402 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Tools - TOOL fox
Hand tools
CRIMPFOX basic pliers, for
accommodating various crimp inserts

– Universal crimping pliers up to 120 mm2

– Wide variety of available dies
– Easily foldable jaw holders mean that the
dies can be changed quickly
– A mechanical drive system keeps the level
of force required to an absolute minimum
Notes:
For matching ferrules, cable lugs, and flat plugs, see page 444
onwards.
For more dies, see www.phoenixcontact.net/products. For dies up to 50 mm² For dies up to 120 mm²

 

Ordering data Ordering data

Pcs. / Pcs. /
Description   Type Order No. Type Order No.
Pkt. Pkt.
Basic pliers, with ratchet function,
for accommodating dies for various contacts
Up to 50 mm² CRIMPFOX-C50 1212340 1
Two-hand operation of up to 120 mm² CRIMPFOX-C120 1212318 1

Accessories Accessories
Upper part of die, for ferrules 50 mm², 70 mm², trapezoidal crimp

CRIMPFOX-C120 AI 70/M-DIE 1212335 1

For 95 mm² CRIMPFOX-C120 AI 95/M-DIE 1212336 1
Lower part of die, for ferrules 50 mm², trapezoidal crimp CRIMPFOX-C120 AI 50/F-DIE 1212337 1

For 70 mm² CRIMPFOX-C120 AI 70/F-DIE 1212338 1

For 95 mm² CRIMPFOX-C120 AI 95/F-DIE 1212339 1
Die (pair), for insulated cable lugs, 10 mm², oval crimp

CRIMPFOX-C50 RCI 10/DIE 1212346 1 CRIMPFOX-C120 RCI 10/DIE 1212327 1

For 16 mm² CRIMPFOX-C50 RCI 16/DIE 1212347 1 CRIMPFOX-C120 RCI 16/DIE 1212328 1
For 25 mm² CRIMPFOX-C50 RCI 25/DIE 1212348 1 CRIMPFOX-C120 RCI 25/DIE 1212329 1
For 35 mm² CRIMPFOX-C120 RCI 35/DIE 1212330 1
Die upper part, for uninsulated cable lugs, (DIN 46234) 6 -
35 mm², indent crimp
CRIMPFOX-C50 RC 35/M-DIE 1212343 1
For 6 - 70 mm² CRIMPFOX-C120 RC 70/M-DIE 1212331 1
Die lower part, for uninsulated cable lugs, 25 mm², indent crimp CRIMPFOX-C50 RC 25/F-DIE 1212344 1

For 35 mm² CRIMPFOX-C50 RC 35/F-DIE 1212345 1

For 10, 16, 25, 35 mm² CRIMPFOX-C120 RC 35/F-DIE 1212332 1
For 6, 50 mm² CRIMPFOX-C120 RC 50/F-DIE 1212333 1
For 10, 70 mm² CRIMPFOX-C120 RC 70/F-DIE 1212334 1
Die (pair), for copper tube lugs, 35 mm², WM crimp

CRIMPFOX-C50 RCT 35-1/DIE 1212341 1

For 16, 35 mm² CRIMPFOX-C120 RCT 35-1/DIE 1212320 1
For 50 mm² CRIMPFOX-C50 RCT 50-1/DIE 1212342 1
For 25, 50 mm² CRIMPFOX-C120 RCT 50-1/DIE 1212321 1
For 10, 70 mm² CRIMPFOX-C120 RCT 70-1/DIE 1212319 1
For 95 mm² CRIMPFOX-C120 RCT 95-1/DIE 1212322 1
For 120 mm² CRIMPFOX-C120 RCT 120-1/DIE 1212323 1
Pre-round die (pair), for sector cable, 25, 35 mm²

CRIMPFOX-C50 R25-35/DIE 1212349 1

For 35, 50 mm² CRIMPFOX-C50 R35-50/DIE 1212350 1
For 50, 70 mm² CRIMPFOX-C50 R50-70/DIE 1212351 1
For 25, 50 mm² CRIMPFOX-C120 R25-50/DIE 1212324 1
For 35, 70 mm² CRIMPFOX-C120 R35-70/DIE 1212325 1
For 95 mm² CRIMPFOX-C120 R95/DIE 1212326 1

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 403

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Tools - TOOL fox
Hand tools
CRIMPFOX crimping pliers
for uninsulated slip-on sleeves

– For processing uninsulated flat plugs and

slip on sleeves with a cross section of up
to 6 mm2
– Unlockable pressure lock
– Consistently high crimping quality
– Marked die stations for precise processing
of the relevant cross sections
Notes:
For matching ferrules, cable lugs, and flat plugs, see page 444
onwards. 0.1 - 1.5 mm² conductor cross section 0.1 - 1.5 mm² conductor cross section

Technical data Technical data

Application range
Conductor [mm2] / AWG 0.1 - 1.5 / 26 - 16 0.1 - 1.5 / 26 - 16
Compression B crimp B crimp

Ordering data Ordering data

Pcs. / Pcs. /
Description Color Type Order No. Type Order No.
Pkt. Pkt.
Crimping pliers, for 2.8 / 4.8 / 6.3 mm uninsulated slip-on sleeves,
three marked die stations, unlockable pressure lock, lateral entry

CRIMPFOX-SC 1,5 1212048 1

Crimping pliers, compact pliers, for uninsulated slip-on sleeves,
2.8 / 4.8 / 6.3 mm, three marked die stations, unlockable pressure
lock, lateral entry

CRIMPFOX-SC 1,5-M 1212725 1

Crimping pliers, for 2.8 / 4.8 / 6.3 mm uninsulated slip-on sleeves,
three marked die stations, unlockable pressure lock, lateral entry

black
Crimping pliers, for 2.8 / 4.8 / 6.3 mm uninsulated slip-on sleeves,
three marked die stations, unlockable pressure lock, lateral entry,
incl. positioning tool

black
Crimping pliers, compact pliers, for angled, uninsulated slip-on
sleeves, marked die station, unlockable pressure lock, lateral entry

Accessories Accessories
Replacementdie
CRIMPFOX-SC 1,5/DIE 1212049 1
Replacement recuperating spring
CRIMPFOX/ SPR-3 1212036 1 CRIMPFOX/ SPR-1 1212069 1

404 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Tools - TOOL fox
Hand tools

0.5 - 6 mm² conductor cross section 0.5 - 6 mm² conductor cross section For angled slip-on sleeves,
1.0 - 2.5 mm² conductor cross section

 

Technical data Technical data Technical data

0.5 - 6 / 22 - 10 0.5 - 6 / 22 - 10 1 - 2.5 / 18 - 14

B crimp B crimp B crimp

Ordering data Ordering data Ordering data

Pcs. / Pcs. / Pcs. /

Type Order No. Type Order No. Type Order No.
Pkt. Pkt. Pkt.

CRIMPFOX-SC 6 1212050 1

CRIMPFOX-SC 6L 1212052 1

CRIMPFOX-SCA 2,5-M 1212726 1

Accessories Accessories Accessories

CRIMPFOX-SC 6/DIE 1212051 1 CRIMPFOX-SC 6/DIE 1212051 1

CRIMPFOX/ SPR-1 1212069 1 CRIMPFOX/ SPR-1 1212069 1 CRIMPFOX/ SPR-1 1212069 1

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 405

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Tools - TOOL fox
Hand tools
CRIMPFOX crimping pliers
for turned contacts

– Crimping pliers for processing turned

contacts of up to 10 mm2
– The integrated positioning tool ensures
that the contacts are perfectly aligned in
the die
– Marked die stations for precise process-
ing of the relevant cross sections

0.5 - 4 mm² conductor cross section

Technical data
Application range
Conductor [mm2] / AWG 0.5 - 4 / 22 - 12
Compression Square crimp

Ordering data

Pcs. /
Description Type Order No.
Pkt.
Crimping pliers, for turned contacts with a pin diameter of
1.6 / 2.5 / 4.0 mm
- For CK1,6-ED ... , CK2,5-ED..., CK4,0-E D... 0,5- CRIMPFOX-TC 4 1212113 1
4 mm2 turned contacts

For conductor cross sections of 6 - 10 mm² CRIMPFOX-TC 10 1212114 1

Accessories
Replacement die
- For CRIMPFOX-TC 4 CRIMPFOX-TC 4/DIE 1212295 1
- For CRIMPFOX-TC 10 CRIMPFOX-TC 10/DIE 1212296 1
Replacement recuperating spring
CRIMPFOX/ SPR-1 1212069 1

406 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Tools - TOOL fox
Hand tools
CRIMPFOX four-mandrel crimping
pliers for turned contacts,
with digital display
– Crimping pliers for processing turned
contacts of up to 2.5 mm2
– The integrated positioning tool ensures
that the contacts are perfectly aligned in
the die
– Marked die stations for precise process-
ing of the relevant cross sections

Conductor cross sections up to 2.5 mm²

Technical data
Application range
Conductor [mm2] / AWG 0.08 - 2.5 / 28 - 13
Compression Four-mandrel crimping

Ordering data

Pcs. /
Description Type Order No.
Pkt.
Crimping pliers, for turned contacts, universal cross section set-
ting, up to a maximum of 2.5 mm², digital display with 0.01 mm
increments, unlockable pressure lock, lateral entry, including posi-
tioning tool

CRIMPFOX-TC MP 1212510 1

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 407

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Tools - TOOL fox
Hand tools
CRIMPFOX crimping pliers
for coaxial connectors

– CRIMPFOX-CX... are crimping pliers for

processing coaxial connectors
– Unlockable pressure lock
– Lateral conductor entry
Notes:
For replacement dies and retaining springs, go to the product area
on the website at www.phoenixcontact.net/products.

Technical data Technical data

Application range
Compression HEX crimp HEX crimp

Ordering data Ordering data

Pcs. / Pcs. /
Description Type Order No. Type Order No.
Pkt. Pkt.
Crimping pliers, for:
Coaxial connector 1.69 mm, 3.25 mm, 4.52 mm, CRIMPFOX-CX 4,52 1212094 1
three marked die stations, pressure lock can be
released, lateral entry, hex crimp

Crimping pliers, compact pliers, coaxial plug-in connectors,

1.69 mm, 3.25 mm, 4.52 mm, three marked die stations,
unlockable pressure lock, lateral entry, Hex crimp

CRIMPFOX-CX 4,52-M 1212713 1

Crimping pliers, compact pliers, coaxial plug-in connectors,
1.69 mm, 5.41 mm, 6.48 mm, three marked die stations,
unlockable pressure lock, lateral entry, Hex crimp

CRIMPFOX-CX 6,48-M 1212714 1

Crimping pliers, for: coaxial plug-in connectors, 1.69 mm,
5.41 mm, 6.48 mm, three marked die stations, unlockable pressure
lock, lateral entry, Hex crimp

CRIMPFOX-CX 6,48 1212095 1

Crimping pliers, compact pliers, coaxial plug-in connectors,
0.7 mm, 1.07 mm, 1.69 mm, 3.25 mm, 4.52 mm, 5.41 mm, six
marked die stations, unlockable pressure lock, lateral entry,
Hex crimp

CRIMPFOX-CX 5,41-M 1212712 1

Crimping pliers, for: coaxial plug-in connectors, 1.73 mm,
8.23 mm, 9.14 mm, three marked die stations, unlockable pressure
lock, lateral entry

CRIMPFOX-CX 9,14 1212096 1

Crimping pliers, for: coaxial plug-in connectors, 2.54 mm,
10.54 mm, two marked die stations, unlockable pressure lock,
lateral entry

CRIMPFOX-CX 10,54 1212097 1

Crimping pliers, for: coaxial plug-in connectors, 2.54 mm,
10.90 mm, two marked die stations, unlockable pressure lock,
lateral entry

CRIMPFOX-CX 10,90 1212098 1

Crimping pliers, compact pliers, coaxial plug-in connectors,
1.69 mm, 2.54 mm, 5.41 mm, 10.90 mm, four marked die stations,
unlockable pressure lock, lateral entry

CRIMPFOX-CX 10,90-1 1212715 1

Crimping pliers, compact pliers, coaxial plug-in connectors,
HDTV, BNC, TNC, 1.04 mm, 4.52 mm, 6.48 mm, 7.06 mm, four
marked die stations, unlockable pressure lock, lateral entry

CRIMPFOX-CX 7,06 HD-M 1212718 1

408 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Tools - TOOL fox
Hand tools
CRIMPFOX crimping pliers
for coaxial CATV plug-in connectors

– CRIMPFOX-CATV... are crimping pliers

for processing coaxial CATV plug-in
connectors
– Unlockable pressure lock
– Lateral conductor entry

For 1.69 mm, 8.23 mm For 6.65 mm, 8.23 mm, 9.70 mm

Technical data Technical data

Application range
Compression HEX crimp HEX crimp

Ordering data Ordering data

Pcs. / Pcs. /
Description   Type Order No. Type Order No.
Pkt. Pkt.
Crimping pliers, for CATV connectors, RG 6.59, 1.69 mm,
8.23 mm, two marked die stations, unlockable pressure lock,
lateral entry

CRIMPFOX-CATV 8,23 1212716 1

Crimping pliers, for CATV connectors, 6.65 mm, 8.23 mm,
9.70 mm, three marked die stations, unlockable pressure lock,
lateral entry

CRIMPFOX-CATV 8,23-1 1212717 1

CRIMPFOX crimping pliers

for D-SUB, coaxial,
and fiber optic plug-in connectors
– CRIMPFOX-FO is a set of crimping pliers
for processing fiber optic connectors
– Unlockable pressure lock
– Lateral conductor entry
Notes:
For replacement dies and retaining springs, go to the product area
on the website at www.phoenixcontact.net/products.

Crimping pliers, for D-SUB contacts Crimping pliers, for fiber optic connectors

Technical data Technical data

Application range
Compression B crimp HEX crimp

Ordering data Ordering data

Pcs. / Pcs. /
Description Type Order No. Type Order No.
Pkt. Pkt.
Crimping pliers
- For rolled D-SUB contacts, high-density, CRIMPFOX-DSUB 5 1212111 1
0.08 mm² - 0.5 mm², incl. contact locator

- For rolled D-SUB contacts, standard, CRIMPFOX-DSUB 5-1 1212711 1

0.05 mm² - 0.5 mm², incl. contact locator

Crimping pliers, for fiber optic connector, 3.25 mm, 3.84 mm,

4.52 mm, 5.0 mm, 5.41 mm, five marked die stations, pressure lock
can be released, lateral entry

CRIMPFOX-FO 5,41 1212099 1

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 409

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Tools - TOOL fox
Hand tools
CRIMPFOX crimping pliers for solar
connectors

2.5 - 6 mm² conductor cross section

Ordering data

Pcs. /
Description   Type Order No.
– Safe crimping of MC3 and MC4 solar con- Pkt.

nectors from Multi-Contact and Crimping pliers, square crimp, for MC3 solar connectors,
2.5 - 6 mm², unlockable pressure lock, lateral entry,
SOLARLOK connectors from Tyco with three marked die stations
– Ergonomically designed grip
CRIMPFOX-SR 6-1 1212467 1
– Optimized mechanical transmission re- Crimping pliers, B-crimp, for MC4 solar connectors, 2.5 - 6 mm²,
duces the force required by unlockable pressure lock, lateral entry,
with three marked die stations
up to 25 percent
CRIMPFOX-SR 6-2 1212468 1
Crimping pliers, square crimp, for SOLARLOK solar connectors,
2.5 - 6 mm², unlockable pressure lock, lateral entry,
with three marked die stations

CRIMPFOX-SR 6-3 1212469 1

410 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Tools - TOOL fox
Hand tools
CRIMPFOX crimping pliers
for socket contacts

0.5 - 2.5 mm² conductor cross section

Ordering data

Pcs. /
Description Type Order No.
– Crimping pliers, for crimping conductors Pkt.

to the STG-MTN socket contacts of the Crimping pliers, for rolled contacts 0.5 - 2.5 mm², four labeled
countersunk stations, unlockable pressure lock, side entry, for
module STG-MTN module and socket contacts too
– Optimized mechanical transmission
CRIMPFOX MT 2,5 1204038 1
reduces the force required by up to
25 percent Accessories
– Four different die stations Replacement die
CRIMPFOX MT 2,5 DIE 1208050 1

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 411

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Tools - TOOL fox
Hand tools
CRIMPFOX universal pliers for Notes:
accommodating various crimp inserts For more crimping dies for ferrules, cable lugs, slip-on sleeves,
turned contacts, coaxial, RJ45, and RJ11 plugs,
visit www.phoenixcontact.net/products.

Basic pliers

Ordering data

Pcs. /
Description   Type Order No.
– One of the key features of the Pkt.

CRIMPFOX-M crimping pliers is the way Basic pliers, for accommodating dies for various contact types,
pressure lock can be unlocked, lateral entry
the crimp inserts can be quickly replaced
without the need for tools CRIMPFOX-M 1212072 1
Crimping pliers set, consisting of CRIMPFOX-M and dies
– The variety of inserts makes it a space- 1212074, 1212079, 1212080, 1212081
saving universal tool for all applications CRIMPFOX-M SET 1212093 1

412 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Tools - TOOL fox
Hand tools
Dies for the CRIMPFOX universal pliers

Notes:
For more crimping dies for ferrules, cable lugs, slip-on sleeves,
turned contacts, coaxial, RJ45, and RJ11 plugs,
visit www.phoenixcontact.net/products.

Dies for CRIMPFOX-M

Ordering data

Pcs. /
Description   Type Order No.
Pkt.
Die, for MC3 solar connectors, lateral entry, 2.5 - 6 mm²

CRIMPFOX-M SR 6-1/DIE 1212471 1

For MC4 solar connectors, lateral entry, 2.5 - 6 mm² CRIMPFOX-M SR 6-2/DIE 1212472 1

For SOLARLOK solar connectors, lateral entry, CRIMPFOX-M SR 6-3/DIE 1212473 1

2.5 - 6  mm²
Die, for ferrules, 0.25 - 10 mm²
CRIMPFOX-M 10/DIE 1212080 1
For 16 - 25 mm² CRIMPFOX-M 25/DIE 1212081 1
For 35 - 50 mm² CRIMPFOX-M 50/DIE 1212082 1
Die, for insulated cable lugs, 0.5 - 1.5 mm² and 1.5 - 2.5 mm²
CRIMPFOX-M RCI 2,5/DIE 1212074 1

For insulated cable lugs, CRIMPFOX-M RCI 6/DIE 1212073 1

0.1 - 4 mm² and 4 - 6 mm²
Die, for uninsulated cable lugs, 0.75 - 2.5 mm²

CRIMPFOX-M RC 2,5/DIE 1212078 1

For 0.5 - 6 mm² CRIMPFOX-M RC 6/DIE 1212079 1
For 4 - 6 and 10 mm² CRIMPFOX-M RC 10-1/DIE 1212744 1
For 4 - 10 mm² CRIMPFOX-M RC 10/DIE 1212077 1
Die, for uninsulated slip-on sleeves, 0.1 - 1 mm²

CRIMPFOX-M SC 1/DIE 1212083 1

For 0.5 - 2.5 mm² CRIMPFOX-M SC 2,5/DIE 1212084 1
For 0.5 - 6 mm² CRIMPFOX-M SC 6/DIE 1212085 1
with wide, flat crimp for 0.5 - 6 mm² CRIMPFOX-M SC 6-FL/DIE 1212741 1

For angled slip-on sleeves, for 6.3 mm, 1.0 - CRIMPFOX-M SCA 2,5/DIE 1212742 1
 2.5 mm²
For angled slip-on sleeves, for 8 mm, 1.0 - 2.5 mm² CRIMPFOX-M SCA 2,5-1/DIE 1212743 1

Die,
For turned contacts with pin diameters 2.5  mm CRIMPFOX-M TC 4/DIE 1212075 1
and 4.0 mm (CK 2,5,CK 4,0),
cross section 0.14 - 4 mm²

For turned contacts with pin diameter 4 mm CRIMPFOX-M TC 10/DIE 1212076 1
(CK 4,0...), cross section 6 - 10 mm²

Die, for RG 174, RG 179, BNC, TNC coaxial connectors

CRIMPFOX-M CX-1/DIE 1212087 1

For RG 58, RG 59, RG 62, RG 71, BNC, TNC CRIMPFOX-M CX-2/DIE 1212088 1

For CATV RG 6,59 CRIMPFOX-M CX-3/DIE 1212089 1

For BNC, TNC, RG6, 1.73, 6.48, 8.23 mm CRIMPFOX-M CX-4/DIE 1212745 1

For BNC, TNC, 0.70, 3.25, 3.85 mm CRIMPFOX-M CX-5/DIE 1212746 1

For BNC, TNC, 1.07, 6.48, 8.23 mm CRIMPFOX-M CX-6/DIE 1212747 1
For BNC, TNC, 1.72, 5.41 mm CRIMPFOX-M CX-7/DIE 1212748 1
For BNC, TNC, 1.72, 8.23 mm CRIMPFOX-M CX-8/DIE 1212749 1
Die, for unshielded RJ45 plugs
CRIMPFOX-M RJ45/DIE 1212090 1
For unshielded RJ11 plugs CRIMPFOX-M RJ11/DIE 1212091 1
Die, for shrink connectors, 0.1 - 0.4 mm² green and 4 - 6 mm² yellow
CRIMPFOX-M HS-1/DIE 1212282 1

Die, for shrink connectors, 0.5 -1.5 mm² red and CRIMPFOX-M HS/DIE 1219092 1
1.5 - 2.5 mm² blue

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 413

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Tools - TOOL fox
Hand tools
CRIMPFOX universal pliers for
accommodating various dies
for data plugs
– One of the key features of the
CRIMPFOX-C D crimping pliers is the
way the crimp inserts can be quickly
replaced without the need for tools
– The variety of inserts makes them a
space-saving universal tool for data plug
applications

Basic pliers

Ordering data

Pcs. /
Description Type Order No.
Pkt.
Basic pliers, for accommodating dies for various contact types,
pressure lock can be unlocked, lateral entry

CRIMPFOX-C D 1212734 1
Die, for unshielded RJ11 plugs

Die, for unshielded RJ22 plugs

Die, for unshielded RJ45 plugs

Die, for unshielded RJ45 plugs, universal

Die, 10-pos.

Die, for DEC MML plugs

414 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Tools - TOOL fox
Hand tools

Die for CRIMPFOX-C D

Ordering data

Pcs. /
Type Order No.
Pkt.

CRIMPFOX-C RJ11/DIE 1212735 1

CRIMPFOX-C RJ22/DIE 1212736 1

CRIMPFOX-C RJ45/DIE 1212737 1

CRIMPFOX-C RJ45U/DIE 1212738 1

CRIMPFOX-C 10P/DIE 1212739 1

CRIMPFOX-C MMJ/DIE 1212740 1

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 415

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Tools - TOOL fox
Hand tools
SCREWFOX screwdrivers for
slotted-head screws

VDE flat-bladed screwdriver



Ordering data

Pcs. /
Description   Type Order No.
– Large contact surface of blades inside Pkt.

screw head Screwdriver, for slotted-head screws, with VDE approval

– Individually tested safety screwdrivers Blade: 0.4 x 2.5 x 80 mm, length: 161 mm SZS 0,4X2,5 VDE 1205037 10
acc. to DIN EN 60900 (VDE 0682-201)
Blade: 0.5 x 3.5 x 100 mm, length: 181 mm SZS 0,5X3,0 VDE 1207404 10
– For working on or in the vicinity of live
parts up to 1000 V AC or 1500 V DC Blade: 0.6 x 2.5 x 80 mm, length: 161 mm SZS 0,6X2,5 VDE 1205040 10
– The tools feature ergonomic two-compo- Blade: 0.6 x 3.5 x 100 mm, length: 181 mm SZS 0,6X3,5 VDE 1212602 10
nent safety handles
Blade: 0.8 x 4.0 x 100 mm, length: 198 mm SZS 0,8X4,0 VDE 1212508 1

Blade: 1.0 x 4.0 x 100 mm, length: 198 mm SZS 1,0X4,0 VDE 1205066 10

Blade: 1.0 x 5.5 x 125 mm, length: 223 mm SZS 1,0X5,5 VDE 1209114 10

Blade: 1.0 x 6.5 x 150 mm, length: 248 mm SZS 1,0X6,5 VDE 1205079 10

Blade: 1.2 x 8.0 x 175 mm, length: 287 mm SZS 1,2X8,0 VDE 1205082 10

Screwdriver, two-component handle, with non-slip grip,

for slotted-head screws
Blade: 0.4 x 2.0 x 60 mm, length: 130 mm

Blade: 0.4 x 2.5 x 60 mm, length: 145 mm

Blade: 0.4 x 2.5 x 75 mm, length: 161 mm

Blade: 0.6 x 3.5 x 100 mm, length: 181 mm

Blade: 0.6 x 3.5 x 200 mm, length: 281 mm

Blade: 0.8 x 4.0 x 100 mm, length: 198 mm

Blade: 1.0 x 5.5 x 150 mm, length: 248 mm

Blade: 1.2 x 6.5 x 150 mm, length: 255 mm

Screwdriver, two-component handle, with non-slip grip, with

impact cap, with hexagon wrench aid for open-end wrench and
ring wrench, for slotted-head screws

Blade: 1.2 x 7 x 125 mm, length: 230 mm

Blade: 1.6 x 10 x 175 mm, length: 287 mm

416 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Tools - TOOL fox
Hand tools

Flat-bladed screwdriver, uninsulated

Applied for:
GOST

Ordering data

Pcs. /
Type Order No.
Pkt.

SF-SL 0,4X2,0-60 1212546 10

SF-SL 0,4X2,5-75 1212547 10

SF-SL 0,5X3,0-80 1212548 10

SF-SL 0,6X3,5-100 1212549 10

SF-SL 0,6X3,5-200 1212550 10

SF-SL 0,8X4,0-100 1212551 10

SF-SL 1,0X5,5-150 1212552 10

SF-SL 1,2X6,5-150 1212553 10

SF-SLIC 1,2X7,0-125 1212554 10

SF-SLIC 1,6X10-175 1212555 10

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 417

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Tools - TOOL fox
Hand tools
SCREWFOX VDE screwdriver/actua-
tion tool for ST terminal blocks

VDE flat-bladed screwdrivers

with integrated insulation

Ordering data

Pcs. /
Description   Type Order No.
– In addition to catering for standard appli- Pkt.

cations, SF-SL ... screwdrivers are partic- Screwdriver/actuation tool, for slotted-head screws/spring-cage
terminal blocks, insulated, two-component handle, with non-slip
ularly suited to the assembly of modular grip, VDE
terminal blocks Blade: 0.6 x 3.5 x 100 mm, length: 181 mm SF-SL 0,6X3,5-100 S-VDE 1212587 10
– VDE-tested, for maximum safety Blade: 0.8 x 4.0 x 100 mm, length: 198 mm SF-SL 0,8X4,0-100 S-VDE 1212588 10
– Because the insulation runs into the shaft,
Blade: 1.0 x 5.5 x 150 mm, length: 248 mm SF-SL 1,0X5,5-125 S-VDE 1212589 10
there is no protruding edge
Screwdriver, protective insulation integrated into shaft, insulated
according to VDE
Size: PZ1 x 80 mm
Size: PZ2 x 100 mm
Screwdriver, protective insulation integrated into shaft, insulated
according to VDE
Size: PH1 x 80 mm
Size: PH2 x 100 mm
Screwdriver, protective insulation integrated into shaft, insulated
according to VDE
Size: Pozidriv® - slotted (plus-minus) PZ1 x 80 mm

Size: Pozidriv® - slotted (plus-minus)

PZ2 x 100 mm
Screwdriver, protective insulation integrated into shaft, insulated
according to VDE
Size: Phillips-Recess® - slotted (plus-minus)
PH1 x 80 mm
Size: Phillips-Recess® - slotted (plus-minus)
PH2 x 100 mm
Screwdriver set, protective insulation integrated into shaft, slot-
ted/Phillips crosshead/combined profile, Pozidriv® + slotted (plus-
minus), insulated according to VDE, 7-piece, including rack, set
contains the following products: 0.6 x 3.5 x 100; 0.8 x 4.0 x 100;
1.0 x 5.5 x 125; PH1 x 80; PH2 x 100; PZ1 x 80; PZ2 x 100

418 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Tools - TOOL fox
Hand tools

VDE screwdriver VDE screwdriver with plus-minus drive VDE screwdriver with various drives
with Pozidriv® or Phillips-Recess®drive

 

Ordering data Ordering data Ordering data

Pcs. / Pcs. / Pcs. /

Type Order No. Type Order No. Type Order No.
Pkt. Pkt. Pkt.

SF-PZ 1-80 S-VDE 1212695 10

SF-PZ 2-100 S-VDE 1212696 10

SF-PH 1-80 S-VDE 1212693 10

SF-PH 2-100 S-VDE 1212694 10

SF-PZSL 1-80 S-VDE 1212699 10

SF-PZSL 2-100 S-VDE 1212700 10

SF-PHSL 1-80 S-VDE 1212697 10

SF-PHSL 2-100 S-VDE 1212698 10

SF-SL/PH/PZ-SL SET S-VDE 1212701 1

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 419

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Tools - TOOL fox
Hand tools
SCREWFOX screwdriver and
actuation tool for ST and
QTC terminal blocks

Flat-bladed screwdriver, uninsulated

Ordering data

Pcs. /
Description   Type Order No.
– In addition to the standard application, Pkt.

these screwdrivers are also ideal for actu- Screwdriver/actuation tool, for slotted-head screws/spring-cage
terminal blocks
ating modular terminal blocks from the Blade: 0.4 x 2.5 x 75 mm, length: 156 mm SZF 0-0,4X2,5 1204504 10
ST ... and QTC ... series
Blade: 0.6 x 3.5 x 100 mm, length: 181 mm SZF 1-0,6X3,5 1204517 10

Blade: 0.8 x 4.0 x 100 mm, length: 198 mm SZF 2-0,8X4,0 1204520 10

Blade: 1.0 x 5.5 x 150 mm, length: 248 mm SZF 3-1,0X5,5 1206612 10

Screwdriver/actuation tool, for slotted-head screws/spring-cage

terminal blocks, insulated
Blade: 0.6 x 3.5 x 100 mm, length: 181 mm SZS 0,6X3,5 1205053 10

Actuation tool, insulated, for all 2.5 mm² and 4 mm² ST spring-
cage terminal blocks, plus push-in and QT fast connection terminal
blocks

420 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Tools - TOOL fox
Hand tools

Actuation tool for push-in technology,

ST and QTC terminal blocks

Ordering data

Pcs. /
Type Order No.
Pkt.

ST-BW 1207608 10

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 421

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Tools - TOOL fox
Hand tools
SCREWFOX screwdrivers for Phillips Notes:
and slotted-head screws Pozidriv®/Supadriv®,
trademarks of European Ind. Serv. Ltd.
Phillips Recess®,
trademark of Phillips Screw Company

VDE Phillips screwdriver with Pozidriv® drive



Ordering data

Pcs. /
Description   Type Order No.
– Screwdrivers for Phillips screws with Pkt.

Pozidriv and Phillips Recess screw head Screwdrivers, for Pozidriv®/Supadriv® Phillips screws, VDE
approval
– VDE approval Size: PZ0 x 80 mm, length: 161 mm SZK PZ0 VDE 1206447 10
– The SZG... screwdrivers have been Size: PZ1 x 80 mm, length: 178 mm SZK PZ1 VDE 1206450 10
specially designed for driving in test Size: PZ2 x 100 mm, length: 205 mm SZK PZ2 VDE 1206463 10
Size: PZ3 x 150 mm, length: 262 mm SZK PZ3 VDE 1212599 10
socket screws safely and without slipping Screwdrivers, for Phillips Recess® screws, VDE approval

Size: PH0 x 80 mm, length: 161 mm SZK PH0 VDE 1205147 10

Size: PH1 x 80 mm, length: 178 mm SZK PH1 VDE 1205150 10
Size: PH2 x 100 mm, length: 205 mm SZK PH2 VDE 1205163 10
Size: PH3 x 150 mm, length: 262 mm SZK PH3 VDE 1212536 10
Screwdrivers, for Pozidriv® Phillips screws

Size: PZ0 x 60 mm, length: 141 mm

Size: PZ1 x 80 mm, length: 178 mm
Size: PZ2 x 100 mm, length: 205 mm
Size: PZ3 x 150 mm, length: 262 mm
Screwdrivers, for Phillips Recess® screws

Size: PH0 x 60 mm, length: 141 mm

Size: PH1 x 80 mm, length: 178 mm
Size: PH2 x 100 mm, length: 205 mm
Size: PH3 x 150 mm, length: 262 mm
Screwdriver, for Pozidriv®/Supadriv® Phillips screws,
VDE approval
Size: PZ1 x 80 mm, length: 178 mm
Size: PZ2 x 100 mm, length: 205 mm
Size: PH1 x 80 mm, length: 178 mm
Size: PH2 x 100 mm, length: 205 mm
Screwdriver, for test socket screws, with VDE approval

For 2.3 mm Ø screw, blade: 0.6 x 3.5 x 100 mm,

length: 198 mm
For 4 mm Ø screw, blade: 0.9 x 6.5 x 175 mm,
length: 287 mm

422 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Tools - TOOL fox
Hand tools

Phillips screwdriver with Pozidriv® drive VDE screwdriver with plus/minus drive VDE screwdriver for test socket screws

Applied for:
GOST  

Ordering data Ordering data Ordering data

Pcs. / Pcs. / Pcs. /

Type Order No. Type Order No. Type Order No.
Pkt. Pkt. Pkt.

SF-PZ 0-60 1212562 10

SF-PZ 1-80 1212563 10
SF-PZ 2-100 1212564 10
SF-PZ 3-150 1212565 10

SF-PH 0-60 1212558 10

SF-PH 1-80 1212559 10
SF-PH 2-100 1212560 10
SF-PH 3-150 1212561 10

SF-PZSL 1-80 VDE 1212556 10

SF-PZSL 2-100 VDE 1212557 10
SF-PHSL 1-80 VDE 1212283 10
SF-PHSL 2-100 VDE 1212288 10

SZG 0,6X3,5 VDE 1205121 10

SZG 0,9X6,5 VDE 1205134 10

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 423

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Tools - TOOL fox
Hand tools
SCREWFOX torque screwdrivers

Torque screw driver, 0.3 - 1.2 Nm, adjustable

Ordering data

Pcs. /
Description Type Order No.
– Torque screwdrivers with hexagonal Pkt.

quick connection holder Torque screwdrivers

Adjustable from 0.3 - 1.2 Nm TSD-M 1,2NM 1212224 1
– High-precision, finely adjustable torque Adjustable from 1.2 - 3 Nm TSD-M 3NM 1212225 1
screwdrivers according to EN ISO 6789 Adjustable from 3 - 6 Nm TSD-M 6NM 1212226 1
– TSD-M ... torque screwdrivers are ad- Accessories
justable from 0.3 - 6.0 Nm Battery-powered screwdriver bit set, 1 attachment set each in
– The figure below shows the TSD-M 6NM 5.5 mm, 8 mm, 13 mm, adapter to ¼"
version ASD BIT SET HN 1209952 1
Socket wrench insert, magnetic, hexagonal, 1/4" drive, suitable
for holders according to DIN  3126-F 6.3 / ISO 1173

Wrench size of 5.5 mm BHN 5,5 1209965 1

Wrench size of 8 mm BHN 8 1209978 1
Wrench size of 10 mm BHN 10 1209981 1
Wrench size of 13 mm BHN 13 1209994 1
Adapter for ¼"
BF 6,3 1209936 1
Adapter insert, for torque screwdrivers with adjustable torque, for
accommodating SAC nuts for 4 mm hexagonal screwdrivers

TSD-M SAC-BIT ADAPTER 1212600 1

424 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Tools - TOOL fox
Hand tools
SCREWFOX cordless screwdriver

21 different torque stages

Applied for:
GOST

Ordering data

Pcs. /
Description   Type Order No.
– Cordless screwdriver with two-speed Pkt.

gearbox, forward/reverse running, and Cordless screwdriver, 3.6 V, incl. rechargeable battery, 1.5 Ah
21-stage clutch with drilling stage of SF-ASD 21 1212532 1
up to 600 rpm Cordless screwdriver set, incl. two rechargeable batteries and
charger, 230 V
– 6.3 mm hexagonal quick connection drill SF-ASD 21 SET 230V 1212530 1
chuck
Accessories
– Integrated LEDs are used to illuminate
Universal bit holder, E6.3-1/4" drive, with automatic locking, one-
the working area hand operation, magnetic, for bits according to DIN 3126 C 6.3 and
– Torque accuracy of ±5 percent E 6.3
– Adjustable from 0.3 - 4.4 Nm SF-UBH 1212590 1
– With optional snap-on protective cap to Replacement charger, for SF-ASD 21 cordless screwdriver,
230 V
prevent unintentional torque adjustment SF-ASD 21/CHARGER 230V 1212535 1
Replacement battery, for SF-ASD 21, 1.5 Ah
SF-ASD 21/ACCU 1,5 AH 1212533 1

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 425

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Tools - TOOL fox
Hand tools
SCREWFOX tool inserts for cordless Notes:
screwdriver and bit handle Pozidriv®/Supadriv®,
trademarks of European Ind. Serv. Ltd.
Phillips Recess®,
trademark of Phillips Screw Company
Torx®,
trademark of Acument Intellectual Properties, LLC, Troy, Mich.,US

Universal bit holder

Ordering data

Pcs. /
Description Color Type Order No.
– Tools for SF-ASD 21 cordless screw- Pkt.

driver, various designs Universal bit holder, E6.3-1/4" drive, with automatic locking, one-
hand operation, magnetic, for bits according to DIN 3126 C 6.3 and
– The hardened bits are suitable for hard E 6.3
and soft screws
silver SF-UBH 1212590 1
– Optimum edge geometries increase the Screw bit, slotted, E6,3-1/4" drive, hardened, suitable for holder
bearing surface and prevent the screws according to DIN 3126-F 6.3/ISO 1173
from being over-tightened Size: 0.5 x 3.0 x 50 mm silver
Size: 0.5 x 3.0 x 70 mm silver
Size: 0.6 x 3.5 x 50 mm silver
Size: 0.6 x 3.5 x 70 mm silver
Size: 0.8 x 4.0 x 50 mm silver
Size: 0.8 x 4.0 x 70 mm silver
Size: 1.0 x 5.5 x 50 mm silver
Size: 1.0 x 5.5 x 70 mm silver
Size: 1.2 x 6.5 x 70 mm silver
Screw bit, PH cross, E6.3-1/4" drive, hardened, suitable for holder
according to DIN 3126-F 6.3/ISO 1173

Size: PH 1 x 50 mm silver

Size: PH 2 x 50 mm silver
Size: PH 3 x 50 mm silver
Size: PH 1 x 70 mm silver
Size: PH 2 x 70 mm silver
Size: PH 3 x 70 mm silver
Screw bit, PZ cross, E6.3-1/4" drive, hardened, suitable for holder
according to DIN 3126-F 6.3/ISO 1173

Size: PZ 1 x 50 mm silver

Size: PZ 2 x 50 mm silver
Size: PZ 3 x 50 mm silver
Size: PZ 1 x 70 mm silver
Size: PZ 2 x 70 mm silver
Size: PZ 3 x 70 mm silver
Screw bit, PZ/slotted plus/minus, E6.3-1/4" drive, hardened, suit-
able for holder according to DIN 3126-F 6.3/ISO 1173

Size: PZ 1 x 70 mm silver

Size: PZ 2 x 70 mm silver
Size: PH 1 x 70 mm silver
Size: PH 2 x 70 mm silver
Screw bit, slotted, graduated, E6.3-1/4" drive, for test socket
screws, hardened, suitable for holder according to DIN 3126-
F 6.3/ISO 1173
Size: 0.6 x 3.5 x 50 mm silver
Size: 0.9 x 6.5 x 50 mm silver

426 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Tools - TOOL fox
Hand tools

Screw bit, slotted Screw bit, PH and PZ cross-recessed Screw bit, plus/minus

Applied for: Applied for: Applied for:

GOST GOST GOST

Ordering data Ordering data Ordering data

Pcs. / Pcs. / Pcs. /

Type Order No. Type Order No. Type Order No.
Pkt. Pkt. Pkt.

SF-BIT-SL 0,5X3,0-50 1212566 5

SF-BIT-SL 0,5X3,0-70 1212567 5
SF-BIT-SL 0,6X3,5-50 1212568 5
SF-BIT-SL 0,6X3,5-70 1212569 5
SF-BIT-SL 0,8X4,0-50 1212571 5
SF-BIT-SL 0,8X4,0-70 1212572 5
SF-BIT-SL 1,0X5,5-50 1212574 5
SF-BIT-SL 1,0X5,5-70 1212575 5
SF-BIT-SL 1,2X6,5-70 1212577 5

SF-BIT-PH 1-50 1212579 5

SF-BIT-PH 2-50 1212580 5
SF-BIT-PH 3-50 1212581 5
SF-BIT-PH 1-70 1212582 5
SF-BIT-PH 2-70 1212583 5
SF-BIT-PH 3-70 1212584 5

SF-BIT-PZ 1-50 1212591 5

SF-BIT-PZ 2-50 1212592 5
SF-BIT-PZ 3-50 1212593 5
SF-BIT-PZ 1-70 1212594 5
SF-BIT-PZ 2-70 1212595 5
SF-BIT-PZ 3-70 1212596 5

SF-BIT-PZSL 1-70 1212603 5

SF-BIT-PZSL 2-70 1212604 5
SF-BIT-PHSL 1-70 1212479 5
SF-BIT-PHSL 2-70 1212601 5

SF-BIT-SLS 0,6X3,5-50 1212605 5

SF-BIT-SLS 0,9X6,5-50 1212606 5

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 427

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Tools - TOOL fox
Hand tools
SCREWFOX tool inserts for cordless
screwdriver and bit handle

Screw bit, Torx®

Applied for:
GOST

Ordering data

Pcs. /
Description Color Type Order No.
– Tools for SF-ASD 21 cordless screw- Pkt.

driver, various designs Screw bit, Torx®, E6.3-1/4" drive, hardened, suitable for holder
according to DIN 3126-F 6.3 / ISO 1173, size: TX 8 x 50 mm
– The hardened bits are suitable for hard
and soft screws
silver SF-BIT-TX 8-50 1212570 5
– Optimum edge geometries increase the Size: TX 10 x 50 mm silver SF-BIT-TX 10-50 1212573 5
bearing surface and prevent the screws Size: TX 15 x 50 mm silver SF-BIT-TX 15-50 1212576 5
from being over-tightened Size: TX 20 x 50 mm silver SF-BIT-TX 20-50 1212578 5
Screw bit, hexagonal, E6.3-1/4" drive, hardened, suitable for
holder according to DIN 3126-F6.3/ISO 1173

Size: hex 2 x 50 mm silver

Size: hex 2.5 x 50 mm silver
Size: hex 3 x 50 mm silver
Size: hex 4 x 50 mm silver
Size: hex 5 x 50 mm silver
Size: hex 6 x 50 mm silver
Size: hex 8 x 50 mm silver

428 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Tools - TOOL fox
Hand tools

Screw bit, hex

Ordering data

Pcs. /
Type Order No.
Pkt.

SF-BIT-HEX 2-50 1212645 5

SF-BIT-HEX 2,5-50 1212646 5
SF-BIT-HEX 3-50 1212647 5
SF-BIT-HEX 4-50 1212648 5
SF-BIT-HEX 5-50 1212649 5
SF-BIT-HEX 6-50 1212650 5
SF-BIT-HEX 8-50 1212651 5

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 429

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Tools - TOOL fox
Hand tools
SCREWFOX socket wrenches

Hexagon insert bit,

wrench size of 5.5 / 8 / 13 mm

Applied for:
GOST

Ordering data

Pcs. /
Description   Type Order No.
SHN ... Pkt.

– Ergonomically designed two-component Socket wrench, hexagon

Wrench size of 5.5 mm SHN 5.5 1209855 1
grip for fatigue-proof and non-slip use Wrench size of 8 mm SHN 8 1209868 1
Wrench size of 13 mm SHN 13 1209923 1
SF-THEX ... T-handle screwdriver, for Allen screws, ergonomically shaped
– Ergonomically designed handles ensure an handle, matt chrome-plated
optimum grip and help avoid fatigue when Size: hex 2 x 100 mm
working Size: hex 2.5 x 100 mm
– The hardened blades are designed for du- Size: hex 3 x 100 mm
Size: hex 4 x 150 mm
rability Size: hex 5 x 150 mm
– Optimum edge geometries increase the Size: hex 6 x 200 mm
bearing surface and prevent the screws Size: hex 8 x 200 mm
Size: hex 10 x 200 mm
from being over-tightened Allen wrench, fully insulated, safety tool in accordance with
EN 60900, length: 150 mm, handle width: 110 mm
VDE-ISS ...
– VDE-insulated Allen wrench with double- Wrench size 5 mm, for M6 screws

layer insulation, for twice the level of safety Wrench size 6 mm, for M8 screws

Allen screw set Wrench size 8 mm, for M10 screws

– Offset screwdriver set in convenient Allen wrench set, 9-part, 1.5 to 10.0 mm, chrome-plated matt
holder finish, with ball head, incl. bracket
– The strict fabrication tolerances and spe-
cial hardening process ensure reliability
and optimum work results
– The ball head on the long limb makes it
possible to carry out work in
hard-to-access areas

430 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Tools - TOOL fox
Hand tools

Allen screw, wrench size 2 - 10 mm Allen screw (VDE), wrench size of 5 / 6 / 8 mm Allen screw, L-shaped, 1.5 - 10 mm

Applied for:
 GOST

Ordering data Ordering data Ordering data

Pcs. / Pcs. / Pcs. /

Type Order No. Type Order No. Type Order No.
Pkt. Pkt. Pkt.

SF-THEX 2-100 1212637 5

SF-THEX 2,5-100 1212638 5
SF-THEX 3-100 1212639 5
SF-THEX 4-150 1212640 5
SF-THEX 5-150 1212641 5
SF-THEX 6-200 1212642 5
SF-THEX 8-200 1212643 5
SF-THEX 10-200 1212644 5

VDE-ISS 5 1203343 1

VDE-ISS 6 1201934 1

VDE-ISS 8 1201947 1

SF-LHEX SET 1212544 1

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 431

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Tools - TOOL fox
Hand tools
SCREWFOX preset torque screwdrivers

Ordering data

Pcs. /
Description Type Order No.
– TSD ... SAC torque screwdrivers with a Pkt.

range of preset torques Torque screwdriver

With preset torque of 0.2 Nm and 4 mm hexagonal drive TSD 02 SAC 1208487 1
from 0.2 Nm to 2.5 Nm
– A wide variety of SAC ... nuts for all kinds With preset torque of 0.4 Nm and 4 mm hexagonal drive TSD 04 SAC 1208429 1
of applications With preset torque of 0.8 Nm and a 4 mm hexagonal TSD 08 SAC 1212597 1
– With the TSD-M... torque screwdrivers, drive
the torque can be custom-set With preset torque of 2.0 Nm and 4 mm hexagonal drive TSD 20 SAC 1212020 1

– The TSD-M... adapters can accommodate With preset torque of 2.5 Nm and 4 mm hexagonal drive TSD 25 SAC 1212315 1
the various nuts
Torque screwdrivers
Adjustable from 0.3 - 1.2 Nm TSD-M 1,2NM 1212224 1
Adjustable from 1.2 - 3 Nm TSD-M 3NM 1212225 1
Adjustable from 3 - 6 Nm TSD-M 6NM 1212226 1
Adapter insert, for torque screwdrivers with adjustable torque,
for accommodating SAC nuts for 4 mm hexagonal screwdrivers

TSD-M SAC-BIT ADAPTER 1212600 1

Accessories
Nut
For assembling sensor/actuator cables with M8 plug-in connectors SAC BIT M8-D10 1208461 1
and for M8 plug-in connectors with insulation displacement con-
nection, for 4 mm hexagonal screwdriver

For assembling SACC M8 plug-in connectors with longitudinal SACC BIT M8-D12 1208474 1
knurl, excluding those with insulation displacement connection,
for 4 mm hexagonal screwdriver

For assembling sensor/actuator cables with M12 plug-in connec- SAC BIT M12-D15 1208432 1
tors and for M12 plug-in connectors with insulation displacement
connection, for 4 mm hexagonal screwdriver

For assembling SACC M12 plug-in connectors, excluding those SACC BIT M12-D20 1208445 1
with insulation displacement connection, for 4 mm hexagonal
screwdriver
For mounting M12 plug-in connectors with hexagonal stainless SAC BIT M12-W14 1212513 1
steel knurl, wrench size 14, with 4 mm hexagonal drive

For assembling 7/8" connectors, with 4 mm hexagonal drive SAC BIT MIN-D25 1212512 1

For the reliable tightening of the pressure nuts with a wrench size of SAC BIT QUICKON-W13 1212033 1
13 mm, for 4 mm hexagonal screwdriver

For reliable tightening of the pressure nuts with a wrench size of SAC BIT HOOD-W 24 1212486 1
24 mm, for 4 mm hexagonal screwdriver

432 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Tools - TOOL fox
Hand tools
SCREWFOX universal control
cabinet key

1 2

Four-way closure

Ordering data

Pcs. /
3 Description   Type Order No.
Pkt.
Control cabinet key, metal, for all common types of control cabi-
net
USS 4 1203149 1
– Universal control cabinet key with the
following closures:
1 = 6 mm, 8 mm square
2 = 8 mm triangle
3 = 5 mm two-way key bit

SCREWFOX universal control

cabinet key

1 2

Nine-way closure

Ordering data

Pcs. /
3 4 Description   Type Order No.
Pkt.
Control cabinet key, metal, for all common types of control cabinet

SF-CCK 9 1212525 1
– Universal control cabinet key, with
strong chain and snap hook, for the
following closures:
1 = 5, 6, 7-8, 9-10 mm square
2 = 7, 8 - 9, 10 - 11 mm triangle
3 = 3-5 mm two-way key bit
4 = 6 mm semicircle

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 433

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Tools - TOOL fox
Hand tools
TESTFOX phasing and voltage tester

The PROFIPOL voltage tester has the

following features:
– DC and AC voltage tests in the range
between 6 V and 400 V
– Polarity test (+/-) for DC voltage
– Shock-proof housing that is protected
against dust and splash water, IP65
– LED display

Single-position voltage tester Two-position voltage tester

Technical data Technical data

General data
Voltage range [V DC] - ... - 6 ... 400
Voltage range [V AC] 150 ... 250 6 ... 400

Ordering data Ordering data

Pcs. / Pcs. /
Description Color Type Order No. Type Order No.
Pkt. Pkt.
Voltage tester, single-position, for 150 - 250 V, conforms to
DIN 57680/6 and VDE 0680/6, can also be used as an actuation
tool for spring-cage terminal blocks, VDE insulated, with non-slip
grip, size: 0.5 x 3.0 x 70 mm

SF-VT VDE 1212598 10

Voltage tester
black PROFIPOL 1209101 1

TESTFOX voltage and continuity tester – Acoustic and optical continuity test
– Load connection using a pushbutton
– Vibration alarm for safe voltage detection
– Shock-proof housing that is protected
against dust and splash water, IP65
– Surge voltage category CAT IV 600 V and
CAT III 1000 V
according to IEC/EN 61243-3:2011

Technical data
General data
Voltage range [V DC] 12 ... 1100
Voltage range [V AC] 12 ... 1000

Ordering data

Pcs. /
– DC and AC voltage tests in the range Description Color Type Order No.
Pkt.
from 12 V to 1000 V AC/1100 V DC, Voltage tester
fully functional even without batteries black DUSPOL EXPERT 1209091 1
– Polarity test (+/-) for DC voltage
– Single-pos. test of the phase conductor
(phase): “R” symbol in the display field for
AC voltage
– Indicator for rotary field direction of a
three-phase network as long as the star
point is grounded
– Measuring point lighting
434 PHOENIX CONTACT
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Tools - TOOL fox
Hand tools
TESTFOX, digital current probe
multimeter

– The current probes can be used for volt-

ages of up to 600 V, category III
– They combine the functions of a digital
multimeter with those of a current probe
– Contained within a compact and practical
housing, so ideal for use in cramped
conditions
– All measuring ranges are protected
against overload
For AC current For DC and AC current

 

Technical data Technical data

General data
Display scope 2000 digits 4000 digits
Accuracy of display 1,0 % 0,5 %
AC voltage measuring range 0.1 V ... 600 V 0.1 mV ... 600 V
DC voltage measuring range 0.1 V ... 600 V 0.1 mV ... 600 V
AC current measuring range 0.1 A ... 400 A 10 mA ... 300 A
DC current measuring range - ... - 10 mA ... 300 A
Resistance measuring range 0.1 Ω ... 20 MΩ 0.1 Ω ... 40 MΩ
Continuity test range Acoustic (20 Ω) Acoustic (50 Ω)
Degree of protection IP30 IP30
Measuring category CAT III 600 V CAT III 300 V / CAT II 600 V
Voltage supply 2 x micro battery 1.5 V, LR03, AAA 2 x micro battery 1.5 V, LR03, AAA
Test certificate IEC/EN 61010-1, DIN VDE 0411 IEC/EN 61010-1, DIN VDE 0411

Ordering data Ordering data

Pcs. / Pcs. /
Description Color Type Order No. Type Order No.
Pkt. Pkt.
Current pliers/multimeter
black TESTFOX CC 1212210 1
Current pliers/multimeter
black TESTFOX CC-1 1212211 1

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 435

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Tools - TOOL fox
Hand tools
TESTFOX digital multimeter

For DC and AC voltages



Technical data
General data
Display scope 2000 digits
– You are bound to be enthused by the Accuracy of display 0.5%
technology of the digital multimeters and Volt sensor yes
AC voltage measuring range 0.1 mV ... 750 V
impressed by their quality DC voltage measuring range 0.1 mV ... 1000 V
– The devices are extremely versatile AC current measuring range - ... -
DC current measuring range - ... -
– Tested and approved according to Resistance measuring range 0.1 Ω ... 20 MΩ
applicable IEC/EN 61010 standards Continuity test range Yes (25 Ω)
independently of certification body Frequency measuring range - ... -
Capacity measuring range - ... -
– Suitable for measuring AC voltages and Temperature measuring range - ... -
resistance as well as testing continuity and Diode test Yes (1.5 mA)
diodes Degree of protection IP30
Measuring category CAT III 600 V / CAT II 1000 V
– TESTFOX M-1 also allows you to mea- Voltage supply 2 x micro battery 1.5 V, LR03, AAA
sure DC and AC currents, capacitance, Test certificate IEC/EN 61010-1, DIN VDE 0411
and frequencies, as well as temperatures Ordering data
within the range of -20°C to +800°C
Pcs. /
Description Color Type Order No.
High-level safety Pkt.

– Phase voltages can be detected precisely Digital multimeter

black TESTFOX M 1212208 1
thanks to the audible and red light signals Digital multimeter
– The devices can be used for voltages of up black
to 600 V category III or 1000 V category II
– They provide professional service techni-
cians and operating engineers with a high-
er level of protection, thereby ensuring
maximum safety during work
Safe cable breakage detection
– Cable breaks and faulty lamps in exposed
cables can be traced from the phase in-
feed side right through to the point of
interruption

436 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Tools - TOOL fox
Hand tools

For DC and AC voltages/currents



Technical data

2000 digits
0.5%
yes
0.1 mV ... 750 V
0.1 mV ... 1000 V
1 mA ... 10 A
1 mA ... 10 A
0.1 Ω ... 20 MΩ
Yes (25 Ω)
1 Hz ... 20 MHz
1.00 pF ... 2.00 mF
-20°C ... 800°C
Yes (1.5 mA)
IP30
CAT III 600 V / CAT II 1000 V
2 x micro battery 1.5 V, LR03, AAA
IEC/EN 61010-1, DIN VDE 0411

Ordering data

Pcs. /
Type Order No.
Pkt.

TESTFOX M-1 1212209 1

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 437

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Tools - TOOL fox
Hand tools
TOOL fox, tool sets
for convenient use on site

– Universal tool sets, with cutting,

stripping, crimping, and testing tools from
the TOOL fox tool range
– Robust and heavy-duty tool bags
– For further sets,
visit www.phoenixcontact.net/products

Tool set in a case Tool set in a carry case wrap

Applied for: Applied for:

GOST GOST

Ordering data Ordering data

Pcs. / Pcs. /
Description   Type Order No. Type Order No.
Pkt. Pkt.
Tool case, equipped with one of each of the following tools:

CRIMPFOX 6S-F  |  WIREFOX 10  |   TOOL-KIT STANDARD 1212422 1

WIREFOX-D 40  |  CUTFOX 18  |  
SZF 1-0,6X3,5  |  5 m tape measure  |  
50 pcs. JBC 2,5/5 junction box connectors  |  
TOOL-KIT STANDARD EMPTY
Tool case, empty
TOOL-KIT STANDARD EMPTY 1212423 1
Tool carry case wrap, equipped with one of each of the
following tools:
CUTFOX-S VDE  |  CUTFOX 16 VDE  |   TOOL-WRAP 1212505 1
UNIFOX-C VDE  |  UNIFOX-P VDE  |  
SZS 0,4X2,5  |  SZS 0,5X3,0  |  SZS 1,0X4,0  |  
SZS 1,0X6,5  |   SZK PH0  |   SZK PH1  |  
SZK  PH2  |   PROFIPOL  |  
TOOL-WRAP EMPTY
Tool carry-on bag, empty
TOOL-WRAP EMPTY 1212501 1
Tool belt pouch, equipped with one of each of the following tools:

CUTFOX-S VDE  |  CUTFOX 18  |  
WIREFOX-D 13  |  UNIFOX-CE VDE  |  
USS 4  |  SZS 0,5X3,0  |  SZS 1,0X4,0  |  
SZS 1,0X5,5  |  SZK PH1  |  SZK PH2  |  
Cutting knife  |  5 m tape measure  |  
PROFIPOL  |   TOOL-BELTPOUCH EMPTY
Tool belt pouch, empty

Tool bag, equipped with one of each of the following tools:

CUTFOX S VDE  |   CUTFOX 18  |  
WIREFOX 10 VDE  |   WIREFOX-D 13  |  
WIREFOX-D 28  |   CRIMPFOX-M  |  
CRIMPFOX-M 10/DIE  |   UNIFOX-CE VDE  |  
UNIFOX-P VDE  |   UNIFOX WP  |  
SZS 0,4X2,5  |   SZS 0,5X3,0  |   SZS 1,0X4,0  |  
SZS 1,0X6,5  |   SZK PH0  |   SZK PH1  |  
SZK PH2  |   PROFIPOL  |   USS 4  |  
Cutting knife  |  5 m tape measure  |  
TOOL CARRIER EMPTY
Tool bag, empty

Tool bag, with laptop and document compartments, equipped with

one of each of the following tools:

CUTFOX 25 VDE  |  CUTFOX-S VDE  | 
WIREFOX 10  |  WIREFOX-D 40  | 
CRIMPFOX-M SET  |  UNIFOX-C VDE  | 
UNIFOX-P VDE  |  UNIFOX WP  | 
SZS 0,4X2,5  |  SZS 0,5X3,0  |  SZS 1,0X4,0  | 
SZS 1,0X6,5  |  SZK PH0  |  SZK PH1  | 
SZK PH2  |  DUSPOL EXPERT  |  USS 4  | 
AI SORTI BOX RD  |  Cutting knife  | 
5 m tape measure  |   TOOL-BAG EMPTY
Tool bag, with document and laptop compartments, empty

438 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Tools - TOOL fox
Hand tools

Tool set in a belt pouch Tool set in a shoulder bag Tool set in a bag with laptop and
document compartments

Applied for: Applied for: Applied for:

GOST GOST GOST

Ordering data Ordering data Ordering data

Pcs. / Pcs. / Pcs. /

Type Order No. Type Order No. Type Order No.
Pkt. Pkt. Pkt.

TOOL-BELTPOUCH 1212506 1

TOOL-BELTPOUCH EMPTY 1212502 1

TOOL-CARRIER 1212503 1

TOOL-CARRIER EMPTY 1212499 1

TOOL-BAG 1212504 1

TOOL-BAG EMPTY 1212500 1

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 439

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Tools - TOOL fox
Hand tools
TOOL fox, tool sets

– We have put together a number of

attractive tool sets for you by selecting
products from our comprehensive range
of professional tools

Applied for:
GOST

Ordering data

Pcs. /
Description   Type Order No.
Pkt.
Stripping, crimping, and cutting set, consisting of: cable cutter
for copper and aluminum up to 12 mm Ø, stripping tool for stripping
multicore signal, control, and fiberglass wires of Ø 2.5 - 11 mm,
insulation thickness up to 1 mm,
Basic pliers for accommodating dies for different contact types,
die, for CRIMPFOX-M, for unshielded RJ45 plugs

TOOL DATA SET 1208856 1

Cutting, stripping, and crimping set, consisting of: cable cutter
for copper and aluminum up to Ø 12 mm, stripping tool for cables
and conductors with a cross section of 0.02 - 10 mm², self-adjust-
ing, stripping length of up to 18 mm, cutting capacity of up to
10 mm² stranded/1.5 mm² solid,
crimping pliers for ferrules measuring 0.14 - 10 mm²

Stripping, crimping, and screwing set, consisting of: screw-

driver for slotted-head screws,
stripping tool for 0.02 - 10 mm² cables and conductors, self-adjust-
ing, stripping length of up to 18 mm, cutting capacity of up to
10 mm² stranded/1.5 mm² solid,
crimping pliers for ferrules acc. to DIN 46228 Parts 1+4,
0.5 - 6 mm², front insertion, square crimping
Ferrules, CSA-certified, 50 pcs. each of: AI 0,5-8 WH,
AI 2,5-8 BU Ferrules, CSA-certified, 100 pcs. each of:
AI 0,75-8 GY, AI 1-8 RD, AI 1,5-8 BK

Range box, made of metal, equipped with ferrules in accordance

with DIN 46228-4: 1990-09, CSA-certified
500 pieces each of AI 0,25-6 YE, AI 0,34-6 TQ, AI 0,5-8 WH,
AI 0,75-8 GY, AI 1-8 RD, AI 1,5-8 BK,
300 pieces of AI 2,5-8 BU,
200 pieces of AI 4-10 GY,
100 pieces of AI 6-12 YE
as well as stripping tool for wires and conductors of up to 6 mm²
Crimp pliers for ferrules in accordance with DIN 46228, Part 1+4,
0.5 - 6 mm², front insertion, trapezoidal crimp

Range box, made of metal, equipped with ferrules in accordance

with DIN 46228-4: 1990-09, CSA-certified
300 pieces of AI 10-12 RD,
200 pieces of AI 16-12 BU,
100 pieces of AI 25-16 YE
as well as stripping tool, for stripping cables of 4.5 - 40 mm,
crimping pliers for ferrules in accordance with DIN 46228, Part 1+4,
10 - 25 mm², lateral insertion, WM crimp

Assortment box, metal, no components mounted

440 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Tools - TOOL fox
Hand tools

  

Ordering data Ordering data Ordering data

Pcs. / Pcs. / Pcs. /

Type Order No. Type Order No. Type Order No.
Pkt. Pkt. Pkt.

TOOL SET ALLROUND 2 1208843 1

TOOL-SET ALLROUND 3 1208953 1

CRIMPSET 6 1202072 1

CRIMPSET 25 1202580 1

CRIMPSET 6/25 LEER 1204041 1

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 441

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Tools - TOOL fox
Hand tools
TOOL fox, screwdriver set Notes:
Pozidriv®/Supadriv®,
trademarks of European Ind. Serv. Ltd.
Phillips Recess®,
trademark of Phillips Screw Company
Torx®,
trademark of Acument Intellectual Properties, LLC, Troy, Mich.,US

Applied for:
GOST

Ordering data

Pcs. /
Description   Type Order No.
– The SF-SL ... screwdriver sets are available Pkt.

with a variety of contents Screwdriver set, slotted/Phillips Recess® 6-part, incl. rack,
contents: 0.5 x 3.0 x 80; 0.8 x 4.0 x 100; 1.0 x 5.5 x 150;
– Wall-mountable screwdriver rack included 1.2 x 6.5 x 150, PH 1, PH 2

SF-SL/PH SET 1212541 1

Screwdriver set, slotted/Pozidriv® cross-recessed, 6-part, incl.
rack, contents: 0.5 x 3.0 x 80; 0.8 x 4.0 x 100; 1.0 x 5.5 x 150;
1.2 x 6.5 x 150, PZ 1, PZ 2

SF-SL/PZ SET 1212542 1

Screwdriver set, slotted/Pozidriv® cross-recessed, VDE insu-
lated, 6-part, incl. rack, contents: 0.4 x 2.5 x 80; 0.6 x 3.5 x 100;
0.8 x 4.0 x 100; 1.0 x 5.5 x 125; PZ 1, PZ 2

SF-SL/PZ SET VDE 1212540 1

Screwdriver set, slotted/Phillips Recess®, VDE insulated, 6-part,
incl. rack, contents: 0.4 x 2.5 x 80; 0.6 x 3.5 x 100; 0.8 x 4.0 x 100;
1.0 x 5.5 x 125; PH 1, PH 2

SF-SL/PH SET VDE 1212539 1

Screwdriver set, protective insulation integrated into shaft, slot-
ted/Phillips crosshead/combined profile, Pozidriv® + slotted (plus-
minus), insulated according to VDE, 7-piece, including rack, set
contains the following products: 0.6 x 3.5 x 100; 0.8 x 4.0 x 100;
1.0 x 5.5 x 125; PH1 x 80; PH2 x 100; PZ1 x 80; PZ2 x 100
SF-SL/PH/PZ-SL SET S-VDE 1212701 1
Screwdriver set, Torx® with drill bit, 6-part, incl. rack, contents:
TX 8 x 60; TX 10 x 80; TX 15 x 80; TX 20 x 100; TX 25 x 100;
TX 30 x 115

SF-TXH SET 1212538 1

Screwdriver set, Torx®, VDE insulated, 6-part, incl. rack, con-
tents: TX 8 x 80; TX 10 x 80; TX 15 x 80; TX 20 x 80; TX 25 x 100;
TX 30 x 100

SF-TX SET VDE 1212537 1

442 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Tools - TOOL fox
Hand tools
TOOL fox, bit set

Ordering data

Pcs. /
Description   Type Order No.
Pkt.
Bit set, with SF-UBH universal bit holder, 25 mm long
slotted/cross-recessed (PZ and PH) bits, 10-part

– Bit set, in compact plastic box, with quick- SF-BIT SET 1212545 10
Battery-powered screwdriver bit set, 1 attachment set each in
change bit holder and the following 5.5 mm, 8 mm, 13 mm, adapter to ¼"
25 mm long bits: 0.8 x 5.5, 1.0 x 5.5, 1.2 x ASD BIT SET HN 1209952 1
6.5, PH1, PH2, PH3, PZ1, PZ2, PZ3
– Clearly arranged storage
– Bits can be accessed quickly thanks to
convenient, one-handed opening mecha-
nism
– Equipped with hardened bits for durability

TOOL fox, screwdriver set

Ordering data

Pcs. /
Description   Type Order No.
Pkt.
Bit screwdriver set with quick-action chuck, 89 mm long slot-
ted/cross-recessed (PZ and PH)/hex / Torx® bits, 17-part, in folding
belt pouch, contents: PH 1,2,3 x 89; PZ 1,2,3 x 89;
– Bit screwdriver set, packed in a practical SL 1.5 x 5.5 x 89; TX 10-30 x 89; SW 3,4,5,6 x 89

belt pouch SF-M SET 1212543 1

– Equipped with the most common types of
screw bit

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 443

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Tools - TOOL fox
Hand tools
Ferrules without insulating collar,
according to DIN 46228-1
b
h
– The ferrules without plastic sleeve are
made from soft tin-plated electrolytic

j
copper
– The dimensions of the ferrules conform

d
k
to DIN 46228-1
– The A 0,25.. can also be used to process
conductors with a cross section
of 0.14 mm2

Notes: Conductor cross sections from 0.14 to 35 mm²

1) These ferrules are not included in DIN 46228-4:1990-09.

Technical data Technical data

General data
Material / coating E-CU / tin-plated (galvanic)

Ordering data
Description Cross section Color Dimensions [mm] Pcs. /
Type Order No.
[mm2] AWG a b d h i j k Pkt.
Ferrules, without plastic sleeves, CSA-certified

0.251) 24 silver - 5.00 1.70 4.30 - 0.15 0.80 A 0,25- 5 3202465 1000
0.251) 24 silver - 7.00 1.70 6.30 - 0.15 0.80 A 0,25- 7 3202478 1000
0.341) 22 silver - 7.00 1.80 6.30 - 0.15 0.90 A 0,34- 7 3009202 1000
0.5 20 silver - 6.00 2.10 5.30 - 0.15 1.00 A 0,5 - 6 3200218 1000
0.51) 20 silver - 8.00 2.10 7.30 - 0.15 1.00 A 0,5 - 8 3202481 1000
0.5 20 silver - 10.00 2.10 9.30 - 0.15 1.00 A 0,5 -10 3202494 1000
0.75 18 silver - 6.00 2.30 5.30 - 0.15 1.20 A 0,75- 6 3200221 1000
0.751) 18 silver - 8.00 2.30 7.30 - 0.15 1.20 A 0,75- 8 3202504 1000
0.75 18 silver - 10.00 2.30 9.30 - 0.15 1.20 A 0,75-10 3200234 1000
1 18 silver - 6.00 2.50 5.30 - 0.15 1.40 A 1 -6 3200247 1000
11 ) 18 silver - 8.00 2.50 7.30 - 0.15 1.40 A 1 -8 3202517 1000
1 18 silver - 10.00 2.50 9.30 - 0.15 1.40 A 1 -10 3200250 1000
1.5 16 silver - 7.00 2.80 6.00 - 0.15 1.70 A 1,5 - 7 3200263 1000
1.5 16 silver - 10.00 2.80 9.00 - 0.15 1.80 A 1,5 -10 3200276 1000
1.5 16 silver - 12.00 2.80 11.00 - 0.15 1.70 A 1,5 -12 3202588 1000
1.5 16 silver - 15.00 2.80 14.00 - 0.15 1.70 A 1,5 -15 3202591 1000
1.5 16 silver - 18.00 2.80 17.00 - 0.15 1.70 A 1,5 -18 3202601 1000
2.5 14 silver - 7.00 3.40 6.00 - 0.15 2.20 A 2,5 - 7 3200289 1000
2.5 14 silver - 12.00 3.40 11.00 - 0.15 2.20 A 2,5 -12 3200292 1000
2.5 14 silver - 18.00 3.40 17.00 - 0.15 2.20 A 2,5 -18 3202821 1000
4 12 silver - 9.00 4.00 8.00 - 0.20 2.80 A 4 -9 3200302 1000
4 12 silver - 12.00 4.00 11.00 - 0.20 2.80 A 4 -12 3200315 1000
4 12 silver - 18.00 4.00 17.00 - 0.20 2.80 A 4 -18 3202834 1000
6 10 silver - 10.00 4.70 9.00 - 0.20 3.50 A 6 -10 3202520 500
6 10 silver - 12.00 4.70 11.00 - 0.20 3.50 A 6 -12 3200328 500
10 8 silver - 12.00 5.80 10.80 - 0.20 4.50 A 10 -12 3200331 500
10 8 silver - 18.00 5.80 16.80 - 0.20 4.50 A 10 -18 3200344 500
16 6 silver - 12.00 7.50 10.50 - 0.20 5.80 A 16 -12 3200425 100
251) 4 silver - 12.00 9.50 10.00 - 0.20 7.30 A 25 -12 3200357 100
25 4 silver - 15.00 9.50 13.00 - 0.20 7.30 A 25 -15 3200360 100
25 4 silver - 18.00 9.50 16.00 - 0.20 7.30 A 25 -18 3200373 100
251) 4 silver - 20.00 9.50 18.00 - 0.20 7.30 A 25 -20 3200386 100
35 2 silver - 18.00 11.00 16.00 - 0.20 8.30 A 35 -18 3200399 100
351) 2 silver - 20.00 11.00 18.00 - 0.20 8.30 A 35 -20 3200409 100

444 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Tools - TOOL fox
Hand tools
Ferrules with insulating collar,
according to DIN 46228-4
b

– The ferrules with plastic sleeve are made h

from soft tin-plated electrolytic copper

– The insulation reliability of close connec-
tions is increased and the splicing of wires

d
k
is prevented

j
– The AI 0,25.. can also be used to process

i
conductors with a cross section
of 0.14 mm2

Notes: Conductor cross sections

1) These ferrules are not included in DIN 46228-4:1990-09. from 0.14 to 120 mm²

Technical data Technical data

General data
Material / coating E-CU / tin-plated (galvanic)
Plastic sleeve material polypropylene
Long/short-term temperature 105°C / 120°C

Ordering data
Description Cross section Color Dimensions [mm] Pcs. /
Type Order No.
[mm2] AWG a b d h i j k Pkt.
Ferrules, with plastic sleeve,
color range as per DIN 46228-4: 1990-09, CSA-certified
0.251) 22 yellow - 10.50 2.00 6.00 0.25 0.15 0.80 AI 0,25- 6 YE 3203024 100
0.251) 22 yellow - 12.50 2.00 8.00 0.25 0.15 0.80 AI 0,25- 8 YE 3203037 100
0.5 20 white - 12.00 2.50 6.00 0.25 0.15 1.10 AI 0,5 - 6 WH 3200687 100
0.5 20 white - 14.00 2.50 8.00 0.25 0.15 1.10 AI 0,5 - 8 WH 3200014 100
0.5 20 white - 14.00 2.50 8.00 0.25 0.15 1.10 AI 0,5 - 8 WH -1000 3200881 1000
0.5 20 white - 16.00 2.50 10.00 0.25 0.15 1.10 AI 0,5 -10 WH 3201275 100
0.51) 20 white - 18.00 2.50 12.00 0.25 0.15 1.10 AI 0,5 -12 WH 3200506 100
0.75 18 gray - 12.00 2.80 6.00 0.25 0.15 1.30 AI 0,75- 6 GY 3200690 100
0.75 18 gray - 14.00 2.80 8.00 0.25 0.15 1.30 AI 0,75- 8 GY 3200519 100
0.75 18 gray - 14.00 2.80 8.00 0.25 0.15 1.30 AI 0,75- 8 GY -1000 3200894 1000
0.75 18 gray - 16.00 2.80 10.00 0.25 0.15 1.30 AI 0,75-10 GY 3201288 100
0.75 18 gray - 18.00 2.80 12.00 0.25 0.15 1.30 AI 0,75-12 GY 3200849 100
1 18 red - 12.00 3.00 6.00 0.30 0.15 1.50 AI 1 - 6 RD 3200742 100
1 18 red - 14.00 3.00 8.00 0.30 0.15 1.50 AI 1 - 8 RD 3200030 100
1 18 red - 14.00 3.00 8.00 0.30 0.15 1.50 AI 1 - 8 RD -1000 3200904 1000
1 18 red - 16.00 3.00 10.00 0.30 0.15 1.50 AI 1 -10 RD 3200182 100
1 18 red - 18.00 3.00 12.00 0.30 0.15 1.50 AI 1 -12 RD 3200674 100
1.51) 16 black - 12.00 3.40 6.00 0.30 0.15 1.80 AI 1,5 - 6 BK 3200755 100
1.5 16 black - 14.00 3.40 8.00 0.30 0.15 1.80 AI 1,5 - 8 BK 3200043 100
1.5 16 black - 14.00 3.40 8.00 0.30 0.15 1.80 AI 1,5 - 8 BK -1000 3200917 1000
1.5 16 black - 18.00 3.40 10.00 0.30 0.15 1.80 AI 1,5 -10 BK 3200195 100
1.5 16 black - 18.50 3.40 12.00 0.30 0.15 1.80 AI 1,5 -12 BK 3201482 100
1.5 16 black - 24.00 3.40 18.00 0.30 0.15 1.80 AI 1,5 -18 BK 3200056 100
2.5 14 blue - 14.00 4.20 8.00 0.30 0.15 2.30 AI 2,5 - 8 BU 3200522 100
2.5 14 blue - 14.00 4.20 8.00 0.30 0.15 2.30 AI 2,5 - 8 BU -1000 3200920 1000
2.51) 14 blue - 17.00 4.20 10.00 0.30 0.15 2.30 AI 2,5 -10 BU 3202533 100
2.5 14 blue - 18.00 4.20 12.00 0.30 0.15 2.30 AI 2,5 -12 BU 3200962 100
2.5 14 blue - 24.00 4.20 18.00 0.30 0.15 2.30 AI 2,5 -18 BU 3200580 100
4 12 gray - 17.00 4.80 10.00 0.30 0.20 2.80 AI 4 -10 GY 3200535 100
4 12 gray - 19.00 4.80 12.00 0.30 0.20 2.80 AI 4 -12 GY 3200959 100
4 12 gray - 26.00 4.80 18.00 0.30 0.20 2.80 AI 4 -18 GY 3200593 100
6 10 yellow - 20.00 6.20 12.00 0.30 0.20 3.50 AI 6 -12 YE 3200548 100
6 10 yellow - 26.00 6.20 18.00 0.30 0.20 3.50 AI 6 -18 YE 3200603 100
10 8 red - 22.00 7.50 12.00 0.30 0.20 4.60 AI 10 -12 RD 3200551 100
10 8 red - 28.00 7.50 18.00 0.30 0.20 4.60 AI 10 -18 RD 3200616 100
16 6 blue - 24.00 8.80 12.00 0.40 0.20 5.80 AI 16 -12 BU 3200564 100
16 6 blue - 28.00 8.80 18.00 0.40 0.20 5.80 AI 16 -18 BU 3200629 100
25 4 yellow - 30.00 11.00 16.00 0.50 0.20 7.30 AI 25 -16 YE 3200577 50
25 4 yellow - 32.00 11.00 18.00 0.50 0.20 7.30 AI 25 -18 YE 3201505 50
25 4 yellow - 35.00 11.00 22.00 0.50 0.20 7.30 AI 25 -22 YE 3200700 50
35 2 red - 30.00 12.50 16.00 0.50 0.20 8.30 AI 35 -16 RD 3200441 50
35 2 red - 32.00 12.50 18.00 0.50 0.20 8.30 AI 35 -18 RD 3201495 50
35 2 red - 39.00 12.50 25.00 0.50 0.20 8.30 AI 35 -25 RD 3200713 50
50 1/0 blue - 36.00 15.00 20.00 0.60 0.35 10.30 AI 50 -20 BU 3200454 50
50 1/0 blue - 40.00 15.00 25.00 0.60 0.35 10.30 AI 50 -25 BU 3200726 25
701) 2 yellow - 37.00 16.00 20.00 0.60 0.35 12.70 AI 70 -20 YE 3201848 25
951) 4 red - 44.00 18.00 25.00 0.60 0.35 14.70 AI 95 -25 RD 3201853 25
1201) 5 blue - 48.00 21.00 27.00 0.70 0.45 16.70 AI120 -27 BU 3201822 25

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 445

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Tools - TOOL fox
Hand tools
Ferrules with insulating collar with
color code in acc. with NF C 63-023
b

– In terms of dimensions, these ferrules h

conform to DIN 46228-4: 1990-09
– The color code of the plastic insulating
collar is based on the French standard

d
k
NF C 63-023: 1994-02

j
– The metal sleeves are made from soft

i
tin-plated electrolytic copper

Notes: Conductor cross sections from 0.5 to 50 mm²

1) These ferrules are not included in DIN 46228-4:1990-09.

Technical data Technical data

General data
Material / coating E-CU / tin-plated (galvanic)
Plastic sleeve material polypropylene
Long/short-term temperature 105°C / 120°C

Ordering data
Description Cross section Color Dimensions [mm] Pcs. /
Type Order No.
[mm2] AWG a b d h i j k Pkt.
Ferrules, with plastic sleeve,
color code as per NF C 63-023: 1994-02, CSA-certified
0.5 20 white - 12.00 2.50 6.00 0.25 0.15 1.10 AI 0,5 - 6 WH 3200687 100
0.5 20 white - 14.00 2.50 8.00 0.25 0.15 1.10 AI 0,5 - 8 WH 3200014 100
0.5 20 white - 14.00 2.50 8.00 0.25 0.15 1.10 AI 0,5 - 8 WH -1000 3200881 1000
0.5 20 white - 16.00 2.50 10.00 0.25 0.15 1.10 AI 0,5 -10 WH 3201275 100
0.51) 20 white - 18.00 2.50 12.00 0.25 0.15 1.10 AI 0,5 -12 WH 3200506 100
0.75 18 blue - 14.00 2.80 8.00 0.25 0.15 1.30 AI 0,75- 8 BU 3200027 100
1 18 red - 12.00 3.00 6.00 0.30 0.15 1.50 AI 1 - 6 RD 3200742 100
1 18 red - 14.00 3.00 8.00 0.30 0.15 1.50 AI 1 - 8 RD 3200030 100
1 18 red - 14.00 3.00 8.00 0.30 0.15 1.50 AI 1 - 8 RD -1000 3200904 1000
1 18 red - 16.00 3.00 10.00 0.30 0.15 1.50 AI 1 -10 RD 3200182 100
1 18 red - 18.00 3.00 12.00 0.30 0.15 1.50 AI 1 -12 RD 3200674 100
1.51) 16 black - 12.00 3.40 6.00 0.30 0.15 1.80 AI 1,5 - 6 BK 3200755 100
1.5 16 black - 14.00 3.40 8.00 0.30 0.15 1.80 AI 1,5 - 8 BK 3200043 100
1.5 16 black - 14.00 3.40 8.00 0.30 0.15 1.80 AI 1,5 - 8 BK -1000 3200917 1000
1.5 16 black - 18.00 3.40 10.00 0.30 0.15 1.80 AI 1,5 -10 BK 3200195 100
1.5 16 black - 18.50 3.40 12.00 0.30 0.15 1.80 AI 1,5 -12 BK 3201482 100
1.5 16 black - 24.00 3.40 18.00 0.30 0.15 1.80 AI 1,5 -18 BK 3200056 100
2.5 14 gray - 14.00 4.20 8.00 0.30 0.15 2.30 AI 2,5 - 8 GY 3200069 100
2.5 14 gray - 18.00 4.20 12.00 0.30 0.15 2.30 AI 2,5 -12 GY 3200205 100
2.5 14 gray - 24.00 4.20 18.00 0.30 0.15 2.30 AI 2,5 -18 GY 3200072 100
4 12 orange - 17.00 4.80 10.00 0.30 0.20 2.80 AI 4 -10 OG 3200085 100
4 12 orange - 19.00 4.80 12.00 0.30 0.20 2.80 AI 4 -12 OG 3200438 100
4 12 orange - 26.00 4.80 18.00 0.30 0.20 2.80 AI 4 -18 OG 3200098 100
6 10 green - 20.00 6.20 12.00 0.30 0.20 3.50 AI 6 -12 GN 3200108 100
6 10 green - 26.00 6.20 18.00 0.30 0.20 3.50 AI 6 -18 GN 3200111 100
10 8 brown - 22.00 7.50 12.00 0.30 0.20 4.60 AI 10 -12 BN 3200124 100
10 8 brown - 28.00 7.50 18.00 0.30 0.20 4.60 AI 10 -18 BN 3200137 100
16 6 ivory - 24.00 8.80 12.00 0.40 0.20 5.80 AI 16 -12 IV 3201181 100
25 4 black - 30.00 11.00 16.00 0.50 0.20 7.30 AI 25 -16 BK 3200412 50
25 4 black - 35.00 11.00 22.00 0.50 0.20 7.30 AI 25 -22 BK 3200739 50
35 2 red - 30.00 12.50 16.00 0.50 0.20 8.30 AI 35 -16 RD 3200441 50
35 2 red - 39.00 12.50 25.00 0.50 0.20 8.30 AI 35 -25 RD 3200713 50
50 1/0 blue - 36.00 15.00 20.00 0.60 0.35 10.30 AI 50 -20 BU 3200454 50
50 1/0 blue - 40.00 15.00 25.00 0.60 0.35 10.30 AI 50 -25 BU 3200726 25

446 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Tools - TOOL fox
Hand tools
Ferrules with insulating collar in
special colors
b

– The ferrules with plastic sleeve are made h

from soft tin-plated electrolytic copper

– In terms of dimensions, they conform to
DIN 46228-4: 1990-09

d
k
– The AI 0,25.. can also be used to process

j
conductors with a cross section of

i
0.14 mm2

Notes: Conductor cross sections

1) These ferrules are not included in DIN 46228-4:1990-09. from 0.14 to 120 mm²

Technical data Technical data

General data
Material / coating E-CU / tin-plated (galvanic)
Plastic sleeve material polypropylene
Long/short-term temperature 105°C / 120°C

Ordering data
Description Cross section Color Dimensions [mm] Pcs. /
Type Order No.
[mm2] AWG a b d h i j k Pkt.
Ferrules, with plastic sleeve, special colors, CSA-certified

0.251) 22 blue - 10.50 2.00 6.00 0.25 0.15 0.80 AI 0,25- 6 BU 3203040 100
0.251) 22 blue - 16.50 2.00 12.00 0.25 0.15 0.80 AI 0,25-12 BU 3200632 100
0.341) 22 turquoise - 10.50 2.00 6.00 0.25 0.15 0.80 AI 0,34- 6 TQ 3203053 100
0.341) 22 turquoise - 12.50 2.00 8.00 0.25 0.15 0.80 AI 0,34- 8 TQ 3203066 100
0.341) 22 turquoise - 16.50 2.00 12.00 0.25 0.25 0.80 AI 0,34-12 TQ 3200645 100
0.5 20 orange - 12.00 2.50 6.00 0.25 0.15 1.10 AI 0,5 - 6 OG 3201301 100
0.5 20 orange - 14.00 2.50 8.00 0.25 0.15 1.10 AI 0,5 - 8 OG 3201123 100
0.75 18 white - 12.00 2.80 6.00 0.25 0.15 1.30 AI 0,75- 6 WH 3201314 100
0.75 18 white - 14.00 2.80 8.00 0.25 0.15 1.30 AI 0,75- 8 WH 3201110 100
1 18 yellow - 12.00 3.00 6.00 0.30 0.15 1.50 AI 1 - 6 YE 3201327 100
1 18 yellow - 14.00 3.00 8.00 0.30 0.15 1.50 AI 1 - 8 YE 3201097 100
1.5 16 red - 14.00 3.40 8.00 0.30 0.15 1.80 AI 1,5 - 8 RD 3201136 100
2.5 14 blue - 14.00 4.20 8.00 0.30 0.15 2.30 AI 2,5 - 8 BU 3200522 100
2.5 14 blue - 14.00 4.20 8.00 0.30 0.15 2.30 AI 2,5 - 8 BU -1000 3200920 1000
2.5 14 blue - 18.00 4.20 12.00 0.30 0.15 2.30 AI 2,5 -12 BU 3200962 100
2.5 14 blue - 24.00 4.20 18.00 0.30 0.15 2.30 AI 2,5 -18 BU 3200580 100
4 12 gray - 17.00 4.80 10.00 0.30 0.20 2.80 AI 4 -10 GY 3200535 100
4 12 gray - 19.00 4.80 12.00 0.30 0.20 2.80 AI 4 -12 GY 3200959 100
4 12 gray - 26.00 4.80 18.00 0.30 0.20 2.80 AI 4 -18 GY 3200593 100
6 10 black - 20.00 6.20 12.00 0.30 0.20 3.50 AI 6 -12 BK 3201107 100
10 8 ivory - 22.00 7.50 12.00 0.30 0.20 4.60 AI 10 -12 IV 3201068 100
16 6 green - 24.00 8.80 12.00 0.40 0.20 5.80 AI 16 -12 GN 3201152 100
16 6 green - 28.00 8.80 18.00 0.40 0.20 5.80 AI 16 -18 GN 3201330 100
25 4 brown - 30.00 11.00 16.00 0.50 0.20 7.30 AI 25 -16 BN 3201084 50
35 2 beige - 30.00 12.50 16.00 0.50 0.20 8.30 AI 35 -16 BE 3201071 50
50 1/0 olive - 36.00 15.00 20.00 0.60 0.35 10.30 AI 50 -20 OL 3201178 50
951) 4 red - 44.00 18.00 25.00 0.60 0.35 14.70 AI 95 -25 RD 3201853 25
1201) 5 blue - 48.00 21.00 27.00 0.70 0.45 16.70 AI120 -27 BU 3201822 25

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 447

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Tools - TOOL fox
Hand tools
Ferrules for special applications

– These ferrules enable practical crimping h

of conductors with increased insulation

– Due to the increased diameter of the
insulating collar, this type of ferrule is

d
k
specifically used with AWG cables

i
Conductor cross sections from 0.5 to 1.5 mm²

Technical data Technical data

General data
Material / coating E-CU / tin-plated (galvanic)
Plastic sleeve material polypropylene
Long/short-term temperature 105°C / 120°C

Ordering data
Description Cross section Color Dimensions [mm] Pcs. /
Type Order No.
[mm2] AWG a b d h i j k Pkt.
Ferrules, with plastic sleeves, CSA-certified

0.5 20 white - 13.50 3.00 8.00 0.25 0.15 1.10 AI 0,5 - 8 WH-GB 1208966 500

0.5 20 white - 15.50 3.00 10.00 0.25 0.15 1.10 AI 0,5-10 WH-GB 3203150 100

0.75 18 gray - 14.00 3.40 8.00 0.25 0.15 1.30 AI 0,75- 8 GY-GB 1208979 500

0.75 18 gray - 16.00 3.40 10.00 0.25 0.15 1.30 AI 0,75-10 GY-GB 3203163 100

1 18 red - 14.00 3.40 8.00 0.30 0.15 1.50 AI 1 - 8 RD-GB 1208982 500

1 18 red - 16.00 3.40 10.00 0.30 0.15 1.50 AI 1 -10 RD-GB-1000 1208869 1000

1.5 16 black - 14.00 3.70 8.00 0.30 0.15 1.80 AI 1,5 - 8 BK-GB-1000 3202892 1000

1.5 16 black - 16.00 3.70 10.00 0.30 0.15 1.80 AI 1,5 -10 BK-GB-1000 1208872 1000

448 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Tools - TOOL fox
Hand tools
Ferrules for special applications

b
h
– These ferrules can be used for
short-circuit-proof cables
– Previous methods of achieving correct
conductor insulation are much more time

d
consuming

i
Conductor cross sections from 1.5 to 16 mm²

Technical data Technical data

General data
Material / coating E-CU / tin-plated (galvanic)
Plastic sleeve material polypropylene
Long/short-term temperature 105°C / 120°C

Ordering data
Description Cross section Color Dimensions [mm] Pcs. /
Type Order No.
[mm2] AWG a b d h i j k Pkt.
Ferrules, with plastic sleeve,
color range as per DIN 46228-4: 1990-09, CSA-certified
1.5 16 black - 17.50 7.00 8.00 0.30 0.15 1.80 AI-XL 1,5- 8 BK 3201916 100
1.5 16 black - 19.50 7.00 10.00 0.30 0.15 1.80 AI-XL 1,5-10 BK 3201974 100

2.5 14 blue - 17.50 7.90 8.00 0.30 0.15 2.30 AI-XL 2,5- 8 BU 3201929 100
2.5 14 blue - 21.50 7.90 12.00 0.30 0.15 2.30 AI-XL 2,5-12 BU 3201987 100

4 12 gray - 19.50 7.90 10.00 0.30 0.20 2.90 AI-XL 4 -10 GY 3201932 100

6 10 yellow - 23.00 8.70 12.00 0.30 0.20 3.60 AI-XL 6 -12 YE 3201945 100

10 8 red - 24.00 10.20 12.00 0.30 0.20 4.60 AI-XL 10 -12 RD 3201958 100

16 6 blue - 25.50 12.50 12.00 0.40 0.20 6.00 AI-XL 16 -12 BU 3201961 100

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 449

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Tools - TOOL fox
Hand tools
Ferrules for special applications

b
d h
– The TWIN ferrules provide a practical
way of crimping two conductors in one
ferrule
– These special ferrules allow chain bridges

k
l
to be set up with ease

j
– Different versions of the individual TWIN

i
ferrules can be selected for specific
applications

Conductor cross sections

from 2 x 0.5 to 2 x 16 mm²

Technical data Technical data

General data
Material / coating E-CU / tin-plated (galvanic)
Plastic sleeve material polypropylene
Long/short-term temperature 105°C / 120°C

Ordering data
Description Cross section Color Dimensions [mm] Pcs. /
Type Order No.
[mm2] AWG b d h i j k l Pkt.
Ferrules, with plastic sleeve,
color range as per DIN 46228-4: 1990-09, CSA-certified
2 x 0.5 2 x 20 white 15.00 2.50 8.00 0.25 0.15 1.50 4.70 AI-TWIN 2X 0,5 - 8 WH 3200933 100

2 x 0.75 2 x 18 gray 15.00 2.80 8.00 0.25 0.15 1.80 5.00 AI-TWIN 2X 0,75- 8 GY 3200807 100
2 x 0.75 2 x 18 gray 17.00 2.80 10.00 0.25 0.15 1.80 5.00 AI-TWIN 2X 0,75-10 GY 3200975 100

2x1 2 x 18 red 15.00 3.40 8.00 0.30 0.15 2.05 5.40 AI-TWIN 2X 1 - 8 RD 3200810 100
2x1 2 x 18 red 17.00 3.40 10.00 0.30 0.15 2.05 5.40 AI-TWIN 2X 1 -10 RD 3200988 100
2x1 2 x 18 red 17.00 3.40 12.00 0.30 0.15 2.05 5.40 AI-TWIN 2X1-12 RD 3240679 100

2 x 1.5 2 x 16 black 16.00 3.60 8.00 0.30 0.15 2.30 6.60 AI-TWIN 2X 1,5 - 8 BK 3200823 100
2 x 1.5 2 x 16 black 18.00 3.60 10.00 0.30 0.15 2.30 6.60 AI-TWIN 2X 1,5 -10 BK 3201534 100
2 x 1.5 2 x 16 black 20.00 3.60 12.00 0.30 0.15 2.30 6.60 AI-TWIN 2X 1,5 -12 BK 3200991 100

2 x 2.5 2 x 14 blue 18.50 4.20 10.00 0.30 0.20 2.90 7.80 AI-TWIN 2X 2,5 -10 BU 3200836 100
2 x 2.5 2 x 14 blue 21.50 4.20 13.00 0.30 0.20 2.90 7.80 AI-TWIN 2X 2,5 -13 BU 3200878 100

2x4 2 x 12 gray 23.00 4.90 12.00 0.30 0.20 3.80 8.80 AI-TWIN 2X 4 -12 GY 3201000 100

2x6 2 x 10 yellow 25.00 5.90 14.00 0.40 0.20 4.90 10.00 AI-TWIN 2X 6 -14 YE 3201013 100

2 x 10 2x8 red 26.00 7.20 14.00 0.40 0.20 6.50 13.00 AI-TWIN 2X10 -14 RD 3201026 100

2 x 16 2x6 blue 31.00 8.80 16.00 0.50 0.20 8.50 16.60 AI-TWIN 2X16 -16 BU 3202847 50
Ferrules, with plastic sleeve,
color range according to NF C 63-023, CSA-certified
2 x 0.75 18 blue 15.00 2.80 8.00 0.25 0.15 1.80 5.00 AI-TWIN 2X0,75-8 BU 3240668 100
2 x 2.5 14 gray 18.50 4.20 10.00 0.30 0.20 2.90 7.80 AI-TWIN 2X2,5-10 GY 3240669 100

450 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Tools - TOOL fox
Hand tools
Ferrules with plastic sleeve, taped,
supplied on large coils

– Ferrules in tape format for automatic pro-

cessing
– The ferrules are supplied on large coils,
each containing a quantity of up to 3000

Conductor cross section of 0.5 - 2.5 mm²

Technical data Technical data

General data
Material / coating E-CU / tin-plated (galvanic)
Plastic sleeve material polypropylene
Long/short-term temperature 105°C / 120°C

Ordering data
Description Cross section Color Dimensions [mm] Pcs. /
Type Order No.
[mm2] AWG a b d h i j k Pkt.
Taped ferrules, with plastic sleeve, large coils for automatic pro-
cessing, color range acc. to DIN 46228-4: 1990-09, CSA certified

0.5 20 white - 14.00 2.50 8.00 0.25 0.15 1.10 AI 0,5-8 WH-B 3000 3240663 3000
0.75 18 gray - 14.00 2.80 8.00 0.25 0.15 1.30 AI 0,75-8 GY-B 3000 3240664 3000
1 18 red - 14.00 3.00 8.00 0.30 0.15 1.50 AI 1-8 RD-B 3000 3240665 3000
1.5 16 black - 14.00 3.40 8.00 0.30 0.15 1.80 AI 1,5-8 BK-B 2500 3240666 2500
2.5 14 blue - 14.00 4.20 8.00 0.30 0.15 2.30 AI 2,5-8 BU-B 1500 3240667 1500

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 451

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Tools - TOOL fox
Hand tools
Assortment boxes containing ferrules

Ordering data

Pcs. /
Description Color Type Order No.
– The practical assortment boxes are Pkt.

designed to keep your workshop tidy Assortment box, equipped with ferrules in accordance
with DIN 46228-4, CSA-certified
– Color coding and the transparent cover 500 pcs. each of AI 0,5-8 WH, AI 2,5-8 BU,
facilitate fast access to the required fer- 100 pcs. each of AI 0,75-8 GY, AI 1-8 RD, AI 1,5-8 BK
red AI SORTI BOX RD 3202960 1
rules. Assortment box, equipped with ferrules in accordance
– Using the integrated euro-clip, they can with DIN 46228-4, CSA-certified
50 pcs. of AI 4-10 GY,
be hung up on perforated board walls, for 20 pcs. each of AI 6-12 YE, AI 10-12 RD,
example, to save space 10 pcs. of AI 16-12 BU
anthracite AI SORTI BOX ANT 3202973 1
Assortment box, equipped with TWIN ferrules in accordance
with DIN 46228-4, CSA-certified
500 pcs. each of AI-TWIN 2x0,5-8 WH, AI-TWIN 2x0,75-8 GY, AI-
TWIN 2x1-8 RD, AI-TWIN 2x1,5-8 BK
25 pcs.of AI-TWIN 2x2,5-10 BU
blue AI-TWIN SORTI BOX BU 3202986 1
Assortment box, equipped with TWIN ferrules in accordance
with DIN 46228-4, CSA-certified
20 pcs. of AI-TWIN 2x4-12 GY,
10 pcs. each of AI-TWIN 2x6-14 YE, AI-TWIN 2x10-14 RD
gray AI-TWIN SORTI BOX GY 3202999 1
Assortment box, empty, with five compartments
light gray AI SORTI BOX-E LGY 3203008 10

452 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Tools - TOOL fox
Hand tools
Ferrule set with tools

– Stripping and crimping set with a

selection of CSA/CSA-certified ferrules

Ordering data

Pcs. /
Description   Type Order No.
Pkt.
Assortment box, made of metal, equipped with ferrules in accor-
dance with DIN 46228-4: 1990-09, CSA-certified
500 pieces each of AI 0,25-6 YE, AI 0,34-6 TQ, AI 0,5-8 WH, AI
0,75-8 GY, AI 1-8 RD, AI 1,5-8 BK,
300 pieces of AI 2,5-8 BU,
200 pieces of AI 4-10 GY,
100 pieces of AI 6-12 YE
as well as stripping tool for cables and conductors of up to 6 mm²
Crimp pliers for ferrules in accordance with DIN 46228, Part 1+4,
0.5 - 6 mm², front insertion, trapezoidal crimp
CRIMPSET 6 1202072 1
Assortment box, made of metal, equipped with ferrules in accor-
dance with DIN 46228-4: 1990-09, CSA-certified
300 pieces of AI 10-12 RD,
200 pieces of AI 16-12 BU,
100 pieces of AI 25-16 YE
as well as stripping tool, for stripping cables of 4.5 - 40 mm,
Crimp pliers for ferrules in accordance with DIN 46228, Part 1+4,
10 - 25 mm², lateral insertion, WM crimp

CRIMPSET 25 1202580 1
Assortment box, metal, no components mounted
CRIMPSET 6/25 LEER 1204041 1

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 453

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Tools - TOOL fox
Hand tools
Ring cable lugs, uninsulated

g
– The ring cable lugs without plastic sleeve e c
are made from high-quality tin-plated
electrolytic copper for maximum protec-
tion against corrosion

d
a
f
– The hard-soldered press zone enables
maximum conductor extraction values to
b
be achieved
– The CRIMPFOX-RC... tools from our
CRIMPFOX range of crimping pliers are
available for optimum crimping Conductor cross sections from 0.5 to 240 mm²

Technical data Technical data

General data
Material / coating Copper / Tin-plated
Temperature range [°C] ... 110

Ordering data
Description Cross section Color Dimensions [mm] Pcs. /
Type Order No.
[mm2] AWG a b c d e f g Pkt.
Ring cable lug, uninsulated, as per DIN 46234

0.5 - 1 20 - 18 silver 6.00 14.00 5.00 1.60 6.00 2.80 0.80 C-RC 1/M2,5 DIN 3240069 100
0.5 - 1 20 - 18 silver 6.00 14.00 5.00 1.60 6.00 3.20 0.80 C-RC 1/M3 DIN 3240070 100
0.5 - 1 20 - 18 silver 6.00 14.00 5.00 1.60 6.00 3.70 0.80 C-RC 1/M3,5 DIN 3240071 100
0.5 - 1 20 - 18 silver 8.00 16.00 5.00 1.60 7.00 4.30 0.80 C-RC 1/M4 DIN 3240072 100
0.5 - 1 20 - 18 silver 10.00 18.00 5.00 1.60 8.00 5.30 0.80 C-RC 1/M5 DIN 3240073 100
0.5 - 1 20 - 18 silver 10.00 18.00 5.00 1.60 8.00 6.50 0.80 C-RC 1/M6 DIN 3240074 100
0.5 - 1 20 - 18 silver 11.60 22.00 5.00 1.60 12.00 8.40 0.80 C-RC 1/M8 DIN 3240075 100
1 - 2.5 18 - 14 silver 6.00 14.00 5.00 2.30 6.00 3.20 0.80 C-RC 2,5/M3 DIN 3240076 100
1 - 2.5 18 - 14 silver 6.00 14.00 5.00 2.30 6.00 3.70 0.80 C-RC 2,5/M3,5 DIN 3240077 100
1 - 2.5 18 - 14 silver 8.00 16.00 5.00 2.30 7.00 4.30 0.80 C-RC 2,5/M4 DIN 3240078 100
1 - 2.5 18 - 14 silver 10.00 19.00 5.00 2.30 9.00 5.30 0.80 C-RC 2,5/M5 DIN 3240079 100
1 - 2.5 18 - 14 silver 11.00 21.50 5.00 2.30 11.00 6.50 0.80 C-RC 2,5/M6 DIN 3240080 100
1 - 2.5 18 - 14 silver 14.00 24.00 5.00 2.30 12.00 8.40 0.80 C-RC 2,5/M8 DIN 3240081 100
1 - 2.5 18 - 14 silver 14.00 25.40 5.00 2.30 12.00 10.50 0.80 C-RC 2,5/M10 DIN 3240082 100
2.5 - 6 14 - 10 silver 8.00 17.50 6.00 3.60 8.00 4.30 1.00 C-RC 6/M4 DIN 3240083 50
2.5 - 6 14 - 10 silver 10.00 20.00 6.00 3.60 9.00 5.30 1.00 C-RC 6/M5 DIN 3240084 50
2.5 - 6 14 - 10 silver 11.00 22.00 6.00 3.60 10.00 6.50 1.00 C-RC 6/M6 DIN 3240085 50
2.5 - 6 14 - 10 silver 14.00 26.00 6.00 3.60 13.00 8.40 1.00 C-RC 6/M8 DIN 3240086 50
2.5 - 6 14 - 10 silver 18.00 30.00 6.00 3.60 15.00 10.50 1.00 C-RC 6/M10 DIN 3240087 50
2.5 - 6 14 - 10 silver 18.00 35.50 6.00 3.60 15.00 13.00 1.00 C-RC 6/M12 DIN 3240088 50
- 10 -8 silver 10.00 21.00 8.00 4.50 8.00 5.30 1.10 C-RC 10/M5 DIN 3240089 100
- 10 -8 silver 11.00 23.00 8.00 4.50 9.00 6.50 1.10 C-RC 10/M6 DIN 3240090 100
- 10 -8 silver 14.00 27.00 8.00 4.50 12.00 8.40 1.10 C-RC 10/M8 DIN 3240091 100
- 10 -8 silver 18.00 30.00 8.00 4.50 13.00 10.50 1.10 C-RC 10/M10 DIN 3240092 100
- 10 -8 silver 22.00 34.00 8.00 4.50 15.00 13.00 1.10 C-RC 10/M12 DIN 3240093 100
- 16 -6 silver 11.00 26.00 10.00 5.80 10.00 5.30 1.10 C-RC 16/M5 DIN 3240094 100
- 16 -6 silver 11.00 26.00 10.00 5.80 10.00 6.50 1.20 C-RC 16/M6 DIN 3240095 100
- 16 -6 silver 14.00 29.00 10.00 5.80 12.00 8.40 1.20 C-RC 16/M8 DIN 3240096 100
- 16 -6 silver 18.00 33.00 10.00 5.80 14.00 10.50 1.20 C-RC 16/M10 DIN 3240097 100
- 16 -6 silver 22.00 37.00 10.00 5.80 16.00 13.00 1.20 C-RC 16/M12 DIN 3240098 100
- 25 -4 silver 12.00 31.00 11.00 7.50 14.00 5.30 1.50 C-RC 25/M5 DIN 3240099 100
- 25 -4 silver 12.00 31.00 11.00 7.50 14.00 6.50 1.50 C-RC 25/M6 DIN 3240100 100
- 25 -4 silver 16.00 33.00 11.00 7.50 14.00 8.40 1.50 C-RC 25/M8 DIN 3240101 100
- 25 -4 silver 18.00 35.00 11.00 7.50 15.00 10.50 1.50 C-RC 25/M10 DIN 3240102 100
- 25 -4 silver 31.00 42.00 11.00 7.50 20.00 13.00 1.50 C-RC 25/M12 DIN 3240103 100
- 25 -4 silver 35.00 49.00 11.00 7.50 25.00 17.00 1.50 C-RC 25/M16 DIN 3240104 100
- 35 -2 silver 15.00 34.00 12.00 9.00 14.00 6.50 1.60 C-RC 35/M6 DIN 3240105 100
- 35 -2 silver 16.00 34.00 12.00 9.00 14.00 8.40 1.60 C-RC 35/M8 DIN 3240106 100
- 35 -2 silver 18.00 36.00 12.00 9.00 15.00 10.50 1.60 C-RC 35/M10 DIN 3240107 100
- 35 -2 silver 22.00 42.00 12.00 9.00 19.00 13.00 1.60 C-RC 35/M12 DIN 3240108 100
- 35 -2 silver 28.00 50.00 12.00 9.00 24.00 17.00 1.60 C-RC 35/M16 DIN 3240109 100
- 50 - 1/0 silver 18.00 43.00 16.00 11.00 18.00 6.50 1.80 C-RC 50/M6 DIN 3240110 100
- 50 - 1/0 silver 18.00 43.00 16.00 11.00 18.00 8.40 1.80 C-RC 50/M8 DIN 3240111 100
- 50 - 1/0 silver 18.00 43.00 16.00 11.00 18.00 10.50 1.80 C-RC 50/M10 DIN 3240112 100
- 50 - 1/0 silver 22.00 47.00 16.00 11.00 20.00 13.00 1.80 C-RC 50/M12 DIN 3240113 100
- 50 - 1/0 silver 28.00 54.00 16.00 11.00 24.00 17.00 1.80 C-RC 50/M16 DIN 3240114 100
- 70 - 2/0 silver 22.00 49.00 18.00 13.00 20.00 6.50 2.00 C-RC 70/M6 DIN 3240115 100
- 70 - 2/0 silver 22.00 49.00 18.00 13.00 20.00 8.40 2.00 C-RC 70/M8 DIN 3240116 100
- 70 - 2/0 silver 22.00 49.00 18.00 13.00 20.00 10.50 2.00 C-RC 70/M10 DIN 3240117 100
- 95 - 3/0 silver 24.00 54.00 20.00 15.00 22.00 8.40 2.50 C-RC 95/M8 DIN 3240120 50
- 95 - 3/0 silver 24.00 54.00 20.00 15.00 22.00 10.50 2.50 C-RC 95/M10 DIN 3240121 50
- 95 - 3/0 silver 24.00 54.00 20.00 15.00 22.00 13.00 2.50 C-RC 95/M12 DIN 3240122 50

454 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Tools - TOOL fox
Hand tools
Ring cable lugs, uninsulated

Conductor cross sections from 0.5 to 240 mm²

Technical data Technical data

General data
Material / coating Copper / Tin-plated
Temperature range [°C] ... 110

Ordering data
Description Cross section Color Dimensions [mm] Pcs. /
Type Order No.
[mm2] AWG a b c d e f g Pkt.
Ring cable lug, uninsulated, as per DIN 46234

120 250 silver 24.00 56.00 22.00 16.50 22.00 8.40 3.00 C-RC 120/M8 DIN 3240124 25
120 250 silver 24.00 56.00 22.00 16.50 22.00 10.50 3.00 C-RC 120/M10 DIN 3240125 25
120 250 silver 24.00 56.00 22.00 16.50 22.00 13.00 3.00 C-RC 120/M12 DIN 3240126 25
150 300 silver 30.00 65.00 24.00 19.00 26.00 10.50 3.20 C-RC 150/M10 DIN 3240128 25
150 300 silver 30.00 65.00 24.00 19.00 26.00 13.00 3.20 C-RC 150/M12 DIN 3240129 25
150 300 silver 30.00 65.00 24.00 19.00 26.00 17.00 3.20 C-RC 150/M16 DIN 3240130 25
185 350 silver 36.00 74.00 28.00 21.00 22.00 10.50 3.50 C-RC 185/M10 DIN 3240131 20
185 350 silver 36.00 74.00 28.00 21.00 22.00 13.00 3.50 C-RC 185/M12 DIN 3240132 20
185 350 silver 36.00 74.00 28.00 21.00 22.00 17.00 3.50 C-RC 185/M16 DIN 3240133 20
240 500 silver 38.00 75.00 32.00 23.50 24.00 10.50 4.00 C-RC 240/M10 DIN 3240134 10
240 500 silver 38.00 75.00 32.00 23.50 24.00 13.00 4.00 C-RC 240/M12 DIN 3240135 10
240 500 silver 38.00 75.00 32.00 23.50 24.00 17.00 4.00 C-RC 240/M16 DIN 3240136 10

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 455

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Tools - TOOL fox
Hand tools
Ring cable lugs, insulated

g
– The insulated ring cable lugs with plastic
sleeve are hard-soldered and feature the
“EASY ENTRY” system
– The sleeves are conically tapered to

d
f
facilitate easy and correct insertion of the
conductor e c
b

Conductor cross sections from 0.5 to 10 mm²

Technical data Technical data

General data
Material / coating Copper / Tin-plated
Temperature range [°C] -20 ... 105

Ordering data
Description Cross section Color Dimensions [mm] Pcs. /
Type Order No.
[mm2] AWG a b c d e f g Pkt.
Ring cable lug, insulated as per UL
0.5 - 1.5 20 - 16 red 5.50 17.50 10.50 4.10 4.30 3.20 0.75 C-RCI 1,5/M3 3240016 100
0.5 - 1.5 20 - 16 red 5.50 17.50 10.50 4.10 4.30 3.70 0.75 C-RCI 1,5/M3,5 3240017 100
0.5 - 1.5 20 - 16 red 8.00 21.70 10.50 4.10 7.30 4.30 0.75 C-RCI 1,5/M4 3240018 100
0.5 - 1.5 20 - 16 red 8.00 21.70 10.50 4.10 7.30 5.30 0.75 C-RCI 1,5/M5 3240019 100
0.5 - 1.5 20 - 16 red 11.60 27.60 10.50 4.10 11.20 6.50 0.75 C-RCI 1,5/M6 3240020 100
1.5 - 2.5 16 - 14 blue 6.60 20.60 11.00 4.50 7.80 3.20 0.80 C-RCI 2,5/M3 3240021 100
1.5 - 2.5 16 - 14 blue 6.60 20.60 11.00 4.50 6.30 3.70 0.80 C-RCI 2,5/M3,5 3240022 100
1.5 - 2.5 16 - 14 blue 8.50 23.00 11.00 4.50 7.80 4.30 0.80 C-RCI 2,5/M4 3240023 100
1.5 - 2.5 16 - 14 blue 9.50 23.00 11.00 4.50 7.30 5.30 0.80 C-RCI 2,5/M5 3240024 100
1.5 - 2.5 16 - 14 blue 12.00 28.10 11.00 4.50 11.00 6.50 0.80 C-RCI 2,5/M6 3240025 50
1.5 - 2.5 16 - 14 blue 12.00 28.10 11.00 4.50 11.00 8.50 0.80 C-RCI 2,5/M8 3240026 50
4-6 16 - 14 yellow 9.50 26.70 14.00 6.60 8.00 4.30 1.00 C-RCI 6/M4 3240027 50
4-6 12 - 10 yellow 9.50 26.70 14.00 6.60 8.00 5.30 1.00 C-RCI 6/M5 3240028 50
4-6 12 - 10 yellow 12.00 32.70 14.00 6.60 12.70 6.50 1.00 C-RCI 6/M6 3240029 25
4-6 12 - 10 yellow 15.00 34.90 14.00 6.60 13.40 8.50 1.00 C-RCI 6/M8 3240030 25
4-6 12 - 10 yellow 15.00 34.90 14.00 6.60 13.40 10.50 1.00 C-RCI 6/M10 3240031 25
- 10 -8 red 10.00 31.30 16.00 7.50 10.90 5.30 1.10 C-RCI 10/M5 3240219 50
- 10 -8 red 11.00 31.30 16.00 7.50 19.30 6.50 1.10 C-RCI 10/M6 3240220 50
- 10 -8 red 14.00 37.30 16.00 7.50 13.80 8.40 1.10 C-RCI 10/M8 3240221 50
- 10 -8 red 18.00 37.30 16.00 7.50 13.80 10.50 1.10 C-RCI 10/M10 3240222 50

456 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Tools - TOOL fox
Hand tools
Ring cable lugs, insulated with
additional crimp zone

g
for conductor insulation
– The insulated ring cable lugs with plastic
sleeve are hard-soldered and feature the
“EASY ENTRY” system
– The sleeves are conically tapered to

d
f
facilitate easy and correct insertion of the
conductor e c
b

Conductor cross sections from 0.5 to 10 mm²

Technical data Technical data

General data
Material / coating Copper / Tin-plated
Temperature range [°C] -20 ... 105

Ordering data
Description Cross section Color Dimensions [mm] Pcs. /
Type Order No.
[mm2] AWG a b c d e f g Pkt.
Ring cable lug, insulated with additional crimp zone for conductor
insulation
0.5 - 1.5 20 - 16 red 5.50 17.50 10.50 4.10 4.30 3.20 0.75 C-RCEI 1,5/M3 3241201 100
0.5 - 1.5 20 - 16 red 5.50 17.50 10.50 4.10 4.30 3.70 0.75 C-RCEI 1,5/M3,5 3241202 100
0.5 - 1.5 20 - 16 red 8.00 21.70 10.50 4.10 7.30 4.30 0.75 C-RCEI 1,5/M4 3241203 100
0.5 - 1.5 20 - 16 red 8.00 21.70 10.50 4.10 7.30 5.30 0.75 C-RCEI 1,5/M5 3241204 100
0.5 - 1.5 20 - 16 red 11.60 27.60 10.50 4.10 11.20 6.50 0.75 C-RCEI 1,5/M6 3241205 100
1.5 - 2.5 16 - 14 blue 6.60 20.60 11.00 4.50 6.30 3.70 0.80 C-RCEI 2,5/M3,5 3241206 100
1.5 - 2.5 16 - 14 blue 8.50 23.00 11.00 4.50 7.80 4.30 0.80 C-RCEI 2,5/M4 3241207 100
1.5 - 2.5 16 - 14 blue 9.50 23.00 11.00 4.50 7.30 5.30 0.80 C-RCEI 2,5/M5 3241208 100
1.5 - 2.5 16 - 14 blue 12.00 28.10 11.00 4.50 11.00 6.50 0.80 C-RCEI 2,5/M6 3241209 100
1.5 - 2.5 16 - 14 blue 12.00 28.10 11.00 4.50 11.00 8.50 0.80 C-RCEI 2,5/M8 3241210 100

4-6 12 - 10 yellow 9.50 26.70 14.00 6.60 8.00 5.30 1.00 C-RCEI 6/M5 3241211 100
4-6 12 - 10 yellow 12.00 32.70 14.00 6.60 12.70 6.50 1.00 C-RCEI 6/M6 3241212 100
4-6 12 - 10 yellow 15.00 34.90 14.00 6.60 13.40 8.50 1.00 C-RCEI 6/M8 3241213 100
4-6 12 - 10 yellow 15.00 34.90 14.00 6.60 13.40 10.50 1.00 C-RCEI 6/M10 3241214 100

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 457

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Tools - TOOL fox
Hand tools
Fork-type cable lugs, insulated and

g
uninsulated

– The fork-type cable lugs without plastic

sleeve feature a hard-soldered neck. In
conjunction with the CRIMPFOX-RC ...

d
f
and CRIMPFOX-RCI ... pliers they can be
used to achieve maximum conductor
c
pull-out forces.
– The insulated versions are halogen-free b

and feature “EASY ENTRY” technology

Conductor cross sections from 0.5 to 6 mm²

Technical data Technical data

General data
Material / coating Copper / Tin-plated
Temperature range [°C] ... 110

Ordering data
Description Cross section Color Dimensions [mm] Pcs. /
Type Order No.
[mm2] AWG a b c d e f g Pkt.
Fork-type cable lug, uninsulated DIN 46234
0.5 - 1.5 20 - 16 silver 5.70 16.00 4.50 1.90 - 3.20 0.75 C-FC 1,5/M3 3240137 100
0.5 - 1.5 20 - 16 silver 6.20 16.00 4.50 1.90 - 3.70 0.75 C-FC 1,5/M3,5 3240138 100
0.5 - 1.5 20 - 16 silver 7.20 16.00 4.50 1.90 - 4.30 0.75 C-FC 1,5/M4 3240139 100
0.5 - 1.5 20 - 16 silver 8.00 16.00 4.50 1.90 - 5.30 0.75 C-FC 1,5/M5 3240140 100
0.5 - 1.5 20 - 16 silver 10.70 17.00 4.50 1.90 - 6.40 0.80 C-FC 1,5/M6 3240141 100
1.5 - 2.5 16 - 14 silver 5.70 16.00 4.80 2.50 - 3.20 0.80 C-FC 2,5/M3 3240142 100
1.5 - 2.5 16 - 14 silver 6.20 16.00 4.80 2.50 - 3.70 0.80 C-FC 2,5/M3,5 3240143 100
1.5 - 2.5 16 - 14 silver 7.20 16.00 4.80 2.50 - 4.30 0.80 C-FC 2,5/M4 3240144 100
1.5 - 2.5 16 - 14 silver 8.00 16.00 4.80 2.50 - 5.30 0.80 C-FC 2,5/M5 3240145 100
1.5 - 2.5 16 - 14 silver 10.70 17.00 4.80 2.50 - 6.40 0.80 C-FC 2,5/M6 3240146 100
1.5 - 2.5 16 - 14 silver 13.50 22.10 4.80 2.50 - 8.40 0.80 C-FC 2,5/M8 3240147 100
4-6 12 - 10 silver 8.20 19.50 6.50 3.60 - 4.30 1.00 C-FC 6/M4 3240148 50
4-6 12 - 10 silver 9.00 19.50 6.50 3.60 - 5.30 1.00 C-FC 6/M5 3240149 50
4-6 12 - 10 silver 12.00 23.10 6.50 3.60 - 6.40 1.00 C-FC 6/M6 3240150 50
4-6 12 - 10 silver 13.50 25.00 6.50 3.60 - 8.40 1.00 C-FC 6/M8 3240151 50

458 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Tools - TOOL fox
Hand tools
Fork-type cable lugs, insulated and
uninsulated

– The fork-type cable lugs without plastic

sleeve feature a hard-soldered neck. In
conjunction with the CRIMPFOX-RC ...
and CRIMPFOX-RCI ... pliers they can be
used to achieve maximum conductor pull-
out forces.
– The insulated versions are halogen-free
and feature “EASY ENTRY” technology

Conductor cross sections from 0.5 to 6 mm²

Technical data Technical data

General data
Material / coating Copper / Tin-plated
Temperature range [°C] -20 ... 105

Ordering data
Description Cross section Color Dimensions [mm] Pcs. /
Type Order No.
[mm2] AWG a b c d e f g Pkt.
Fork-type cable lug, insulated as per UL
0.5 - 1.5 20 - 16 red 5.70 22.00 10.50 4.10 - 3.20 0.75 C-FCI 1,5/M3 3240032 100
0.5 - 1.5 20 - 16 red 5.70 22.00 10.50 4.10 - 3.70 0.75 C-FCI 1,5/M3,5 3240033 100
0.5 - 1.5 20 - 16 red 7.20 22.00 10.50 4.10 - 4.30 0.75 C-FCI 1,5/M4 3240034 100
0.5 - 1.5 20 - 16 red 8.00 22.00 10.50 4.10 - 5.30 0.75 C-FCI 1,5/M5 3240035 100
0.5 - 1.5 20 - 16 red 10.70 22.00 10.50 4.10 - 6.50 0.75 C-FCI 1,5/M6 3240036 100
1.5 - 2.5 16 - 14 blue 5.70 22.50 11.00 4.50 - 3.20 0.80 C-FCI 2,5/M3 3240037 100
1.5 - 2.5 16 - 14 blue 5.70 22.50 11.00 4.50 - 3.70 0.80 C-FCI 2,5/M3,5 3240038 100
1.5 - 2.5 16 - 14 blue 7.20 22.50 11.00 4.50 - 4.30 0.80 C-FCI 2,5/M4 3240039 100
1.5 - 2.5 16 - 14 blue 8.00 22.50 11.00 4.50 - 5.30 0.80 C-FCI 2,5/M5 3240040 50
1.5 - 2.5 16 - 14 blue 10.70 22.50 11.00 4.50 - 6.50 0.80 C-FCI 2,5/M6 3240041 50
4-6 12 - 10 yellow 8.20 26.70 14.00 6.60 - 4.30 1.00 C-FCI 6/M4 3240042 50
4-6 12 - 10 yellow 9.00 26.70 14.00 6.60 - 5.30 1.00 C-FCI 6/M5 3240043 50
4-6 12 - 10 yellow 12.00 30.30 14.00 6.60 - 6.50 1.00 C-FCI 6/M6 3240044 25
4-6 12 - 10 yellow 13.50 32.80 14.00 6.60 - 8.50 1.00 C-FCI 6/M8 3240045 25

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 459

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Tools - TOOL fox
Hand tools
Pin cable lugs, insulated

g
The key features of the insulated pin cable
lugs with plastic collars are as follows:
– “EASY ENTRY” for easy and reliable
conductor entry

d
f
– Hard-soldered crimping zone
for maximum extraction forces c

– Electrolytic tin plating b

– Halogen-free

Conductor cross sections from 0.5 to 6 mm²

Technical data
General data
Material / coating Copper / Tin-plated
Temperature range [°C] -20 ... 105

Ordering data
Description Cross section Color Dimensions [mm] Pcs. /
Type Order No.
[mm2] AWG a b c d e f g Pkt.
Pin cable lug, insulated as per UL
0.5 - 1.5 20 - 16 red - 22.50 10.50 4.10 - 2.00 0.75 C-PCI 1,5/2 3240064 100
1.5 - 2.5 16 - 14 blue - 23.00 11.00 4.50 - 2.00 0.80 C-PCI 2,5/2 3240066 100
4-6 12 - 10 yellow - 27.50 14.00 6.60 - 2.70 0.80 C-PCI 6/2,7 3240068 50

Pin cable lugs, insulated with additional

crimp zone for conductor insulation
g

The key features of the insulated pin cable

lugs with plastic collars are as follows:
– “EASY ENTRY” for easy and reliable
conductor entry
d
f

– Hard-soldered crimping zone

for maximum extraction forces c

– Electrolytic tin plating b

– Halogen-free

Conductor cross sections from 0.5 to 6 mm²

Technical data
General data
Material / coating Copper / Tin-plated
Temperature range [°C] -20 ... 105

Ordering data
Description Cross section Color Dimensions [mm] Pcs. /
Type Order No.
[mm2] AWG a b c d e f g Pkt.
Pin cable lug, insulated with additional crimp zone for conductor
insulation
0.5 - 1.5 20 - 16 red - 22.50 10.50 4.10 - 2.00 0.75 C-PCEI 1,5/2 3241215 100
1.5 - 2.5 16 - 14 blue - 23.00 11.00 4.50 - 2.00 0.80 C-PCEI 2,5/2 3241216 100
4-6 12 - 10 yellow - 27.50 14.00 6.60 - 2.70 0.80 C-PCEI 6/2 3241217 100

460 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Tools - TOOL fox
Hand tools
Flat pin cable lugs with hooks, insulated

g
The key features of the flat pin cable lugs
with plastic collars are as follows:
– “EASY ENTRY” for easy and reliable
conductor entry

d
a
– Electrolytic tin plating
– Halogen-free c
b

Conductor cross sections from 0.5 to 6 mm²

Technical data
General data
Material / coating Copper / Tin-plated
Temperature range [°C] -20 ... 105

Ordering data
Description Cross section Color Dimensions [mm] Pcs. /
Type Order No.
[mm2] AWG a b c d e f g Pkt.
Flat pin cable lug, insulated
0 - 1.5 20 - 16 red 2.80 28.00 10.50 4.00 - - 0.80 C-BCI 1,5/2,8 3240015 100
0.5 - 1.5 20 - 16 red 4.60 28.00 10.50 4.00 - - 0.80 C-BCI 1,5/4,6 3240568 100
1.5 - 2.5 16 - 14 blue 2.80 28.50 11.00 4.50 - - 0.80 C-BCI 2,5/2,8 3240046 100
1.5 - 2.5 16 - 14 blue 4.60 28.50 11.00 4.50 - - 0.80 C-BCI 2,5/4,6 3240569 100
4-6 12 - 10 yellow 2.80 32.00 14.00 6.50 - - 0.80 C-BCI 6/2,8 3240047 50
4-6 12 - 10 yellow 4.60 32.00 14.00 6.50 - - 1.00 C-BCI 6/4,6 3240570 50

Flat pin cable lugs, straight, insulated

g

– Easy and reliable conductor entry thanks

to “EASY ENTRY”
– Hard-soldered crimping zone for
maximum conductor pull-out force in
d
a

connection with CRIMPFOX RCI... pliers

– Electrogalvanized c

– Halogen-free b

Conductor cross sections from 0.5 to 6 mm²

Technical data
General data
Material / coating CU / electrogalvanized
Temperature range [°C] -20 ... 105

Ordering data
Description Cross section Color Dimensions [mm] Pcs. /
Type Order No.
[mm2] AWG a b c d e f g Pkt.
Flat pin cable lug, insulated, pin dimensions:

19.5 x 2.8 mm 0.5 - 1.5 20 - 16 red 2.80 19.50 10.50 4.10 - - 0.75 C-BCSI 1,5/9X2,8 3240531 100
20 x 2.8 mm 1.5 - 2.5 16 - 14 blue 2.80 20.00 11.00 4.50 - - 0.80 C-BCSI 2,5/9X2,8 3240532 100
32 x 4.5 mm 4-6 12 - 10 yellow 2.80 24.00 14.00 6.60 - - 1.00 C-BCSI 6/10X2,8 3240546 100
24 x 2.8 mm 4-6 12 - 10 yellow 4.50 32.00 14.00 6.60 - - 1.00 C-BCSI 6/18X4,5 3240533 100

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 461

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Tools - TOOL fox
Hand tools
Slip-on sleeves and flat plugs,
uninsulated

g
– The uninsulated slip-on sleeves and flat
plugs are made from electrolytically tin-
plated brass
– They round off the product range in

a
terms of connectors

Conductor cross sections from 0.5 to 6 mm²

Technical data Technical data

General data
Material / coating Brass / Tin-plated
Temperature range [°C] ... 110

Ordering data
Description Cross section Color Dimensions [mm] Pcs. /
Type Order No.
[mm2] AWG a b c d e f g Pkt.
Slip-on sleeve, uninsulated as per DIN 46247

0.5 - 1 20 - 18 silver 2.80 14.50 - - - - 0.30 C-SCF 1/2,8X0,5 3240152 100

0.5 - 1 20 - 18 silver 2.80 12.50 - - - - 0.30 C-SCF 1/2,8X0,8 3240153 100
0.5 - 1.5 20 - 16 silver 4.80 15.60 - - - - 0.40 C-SCF 1,5/4,8X0,5 3240154 100
0.5 - 1.5 20 - 16 silver 4.80 15.60 - - - - 0.40 C-SCF 1,5/4,8X0,8 3240155 100
0.5 - 1.5 20 - 16 silver 6.30 19.20 - - - - 0.40 C-SCF 1,5/6,3X0,8 3240156 100
1.5 - 2.5 16 - 14 silver 4.80 15.60 - - - - 0.40 C-SCF 2,5/4,8X0,5 3240157 100
1.5 - 2.5 16 - 14 silver 4.80 15.60 - - - - 0.40 C-SCF 2,5/4,8X0,8 3240158 100
1.5 - 2.5 16 - 14 silver 6.30 19.20 - - - - 0.40 C-SCF 2,5/6,3X0,8 3240159 100
4-6 12 - 10 silver 6.30 19.20 - - - - 0.40 C-SCF 6/6,3X0,8 3240160 100
Flat plug, uninsulated as per DIN 46248
0.5 - 1.5 20 - 16 silver 6.30 20.00 - - - - 0.80 C-SCM 1,5/6,3X0,8 3240161 100
1.5 - 2.5 16 - 14 silver 6.30 20.00 - - - - 0.80 C-SCM 2,5/6,3X0,8 3240162 100

Accessories
Insulating sleeve, as shock protection for slip-on sleeves, to be  
threaded onto the cable in advance
For 2.8 mm slip-on sleeves transparent   PT/FS 2,8 1406700 500
For 4.8 mm slip-on sleeves transparent   PT/FS 4,8 1670497 25
For 6.3 mm slip-on sleeves transparent   PT/FS 6,3 0604707 500

462 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Tools - TOOL fox
Hand tools
Slip-on sleeves and flat plugs,
insulated

g
The key features of the insulated flat
plugs and slip-on sleeves with plastic collars
are as follows:
– “EASY ENTRY” for easy and reliable

d
a
conductor entry
– Hard-soldered crimping zone for c

maximum extraction forces b

– Electrolytic tin plating

– Halogen-free
Conductor cross sections from 0.5 to 6 mm²

Technical data Technical data

General data
Material / coating Brass / Tin-plated
Temperature range [°C] -20 ... 105

Ordering data
Description Cross section Color Dimensions [mm] Pcs. /
Type Order No.
[mm2] AWG a b c d e f g Pkt.
Slip-on sleeve, insulated as per UL
0.5 - 1.5 20 - 16 red 2.80 18.50 10.50 4.10 - - 0.25 C-SCFI 1,5/2,8X0,5 3240048 100
0.5 - 1.5 20 - 16 red 2.80 18.50 10.50 4.10 - - 0.25 C-SCFI 1,5/2,8X0,8 3240049 100
0.5 - 1.5 20 - 16 red 4.80 19.50 10.50 4.10 - - 0.40 C-SCFI 1,5/4,8X0,5 3240050 100
0.5 - 1.5 20 - 16 red 4.80 19.50 10.50 4.10 - - 0.40 C-SCFI 1,5/4,8X0,8 3240051 100
0.5 - 1.5 20 - 16 red 6.30 21.50 10.50 4.10 - - 0.40 C-SCFI 1,5/6,3X0,8 3240052 100
1.5 - 2.5 16 - 14 blue 4.80 20.00 11.00 5.00 - - 0.40 C-SCFI 2,5/4,8X0,5 3240053 50
1.5 - 2.5 16 - 14 blue 4.80 20.00 11.00 5.00 - - 0.40 C-SCFI 2,5/4,8X0,8 3240054 50
1.5 - 2.5 16 - 14 blue 6.30 22.00 11.00 5.00 - - 0.40 C-SCFI 2,5/6,3X0,8 3240055 50
4-6 12 - 10 yellow 6.30 25.00 14.00 6.60 - - 0.40 C-SCFI 6/6,3X0,8 3240056 50
Flat plug, insulated as per UL
0.5 - 1.5 20 - 16 red 6.30 22.00 10.50 4.10 - - 0.80 C-SCMI 1,5/6,3X0,8 3240058 100
1.5 - 2.5 16 - 14 blue 6.30 22.50 11.00 4.50 - - 0.80 C-SCMI 2,5/6,3X0,8 3240059 50
4-6 12 - 10 yellow 6.30 24.50 14.00 6.60 - - 0.80 C-SCMI 6/6,3X0,8 3240060 50

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 463

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Tools - TOOL fox
Hand tools
Slip-on distributor, insulated

g
– Easy and reliable conductor entry thanks
to “EASY ENTRY”
– Hard-soldered crimping zone for

d
a
maximum conductor pull-out force in
connection with CRIMPFOX RCI... pliers
– Electrogalvanized c

– Halogen-free b

Conductor cross sections from 0.5 to 2.5 mm²

Technical data
General data
Material / coating Brass / electrogalvanized
Temperature range [°C] -20 ... 105

Ordering data
Description Cross section Color Dimensions [mm] Pcs. /
Type Order No.
[mm2] AWG a b c d e f g Pkt.
Slip-on distributor, insulated, for 6.3 x 0.8 mm plugs and sleeves

0.5 - 1.5 20 - 16 red 6.30 22.50 10.50 41.00 - - 0.40 C-SCFMI 1,5/6,3X0,8 3240529 50
1.5 - 2.5 16 - 14 blue 6.30 23.00 11.00 11.00 - - 0.40 C-SCFMI 2,5/6,3X0,8 3240530 50

Slip-on sleeves, fully insulated

g

– Easy and reliable conductor entry thanks

to “EASY ENTRY”
– Hard-soldered crimping zone for
d
a

maximum conductor pull-out force in

connection with CRIMPFOX RCI... pliers
– Electrogalvanized c
– Halogen-free b

Conductor cross sections from 0.5 to 6 mm²

Technical data
General data
Material / coating Brass / electrogalvanized
Temperature range [°C] -20 ... 105

Ordering data
Description Cross section Color Dimensions [mm] Pcs. /
Type Order No.
[mm2] AWG a b c d e f g Pkt.
Slip-on sleeve, fully insulated, for plugs:

2.8 x 0.5 mm 0.5 - 1.5 20 - 16 red 2.80 19.00 10.50 4.30 - - 0.25 C-SCFFI 1,5/2,8X0,5 3240534 50
2.8 x 0.8 mm 0.5 - 1.5 20 - 16 red 2.80 19.00 10.50 4.30 - - 0.25 C-SCFFI 1,5/2,8X0,8 3240535 50
4.8 x 0.5 mm 0.5 - 1.5 20 - 16 red 4.80 19.50 10.50 4.30 - - 0.40 C-SCFFI 1,5/4,8X0,5 3240536 50
4.8 x 0.8 mm 0.5 - 1.5 20 - 16 red 4.80 19.50 10.50 4.30 - - 0.40 C-SCFFI 1,5/4,8X0,8 3240537 50
6.3 x 0.8 mm 0.5 - 1.5 20 - 16 red 6.30 21.50 10.50 4.30 - - 0.40 C-SCFFI 1,5/6,3X0,8 3240538 50
4.8 x 0.5 mm 1.5 - 2.5 16 - 14 blue 4.80 20.00 11.00 5.00 - - 0.40 C-SCFFI 2,5/4,8X0,5 3240539 50
4.8 x 0.8 mm 1.5 - 2.5 16 - 14 blue 4.80 20.00 11.00 5.00 - - 0.40 C-SCFFI 2,5/4,8X0,8 3240540 50
6.3 x 0.8 mm 1.5 - 2.5 16 - 14 blue 6.30 22.00 11.00 5.00 - - 0.40 C-SCFFI 2,5/6,3X0,8 3240547 25
6.3 x 0.8 mm 4-6 12 - 10 yellow 6.30 26.00 14.00 6.60 - - 0.40 C-SCFFI 6/6,3X0,8 3240541 25

464 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Tools - TOOL fox
Hand tools
Butt connector, fully insulated

– Conductor through connection protection b

– Hard-soldered crimping zone for

g
maximum conductor pull-out force in
connection with CRIMPFOX RCI... pliers

d
– Electrogalvanized
– Halogen-free

Conductor cross sections from 0.5 to 6 mm²

Technical data Technical data

General data
Material / coating CU / electrogalvanized
Temperature range [°C] -20 ... 105

Ordering data
Description Cross section Color Dimensions [mm] Pcs. /
Type Order No.
[mm2] AWG a b c d e f g Pkt.
Butt connector, insulated
0.5 - 1.5 20 - 16 red - 25.00 - 4.00 - - 0.75 C-JCI 1,5 3240061 50
1.5 - 2.5 16 - 14 blue - 25.30 - 4.50 - - 0.80 C-JCI 2,5 3240062 50
4-6 12 - 10 yellow - 27.50 - 6.00 - - 1.00 C-JCI 6 3240063 25

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 465

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
466 PHOENIX CONTACT
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Automatic devices - TOOL fox

Phoenix Contact offers a comprehensive    

Product range overview  
range of innovative machine tools for
flexible and fast processing of conductors    
Automatic devices 468
and cables where various steps can be
automated.       
A combination of functionality, quality,   Automatic cutting device for conductors and cables 470 
and short modification times guarantees   Stripping machine 471 
high levels of flexibility while ensuring excel-   Pneumatic crimping pliers 472 
lent results every time. Cutting machines,
stripping machines, and crimping machines   Portable crimping machine for ferrules, cable lugs, and connectors 474 
are available.
  CRIMPHANDY portable hand-held machine 476 

  Portable stripping and crimping machine for taped products 478 

  Ferrules with plastic sleeve, taped 479 

  Stripping and crimping machine for bulk goods 480 

PHOENIX CONTACT 467

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Tools - TOOL fox
Automatic devices

Automatic stripping Automatic crimping Automatic stripping and crimping

in a single operation

468 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Tools - TOOL fox
Automatic devices

The CUTFOX 10 automatic cutting de- The WF 1000 stripping machine enables ZAP crimping pliers are pneumatic pliers
vice cuts conductors and cables with a cross the automatic stripping of conductors with for ferrules with a cross section range of
section of up to 10 mm2. Solid and stranded a cross section of up to 6 mm2 or cables 0.25 to 10 mm2. The crimping process is
conductors can be cut to length with milli- with a diameter of up to 6 mm, as well as activated by a foot valve. Two integrated
meter precision. The length and number of the option of partial stripping. recesses allow easy access to the ferrules.
cuts is entered via the user-friendly display. The stripping dimensions are set individually
The CUTFOX 10 automatically adapts to via rotary buttons and shown visually on the
the diameter when there is a change in ma- display.
terial.

The CF 500 is characterized by its high The CF 3000 2,5 stripping and crimping The automatic stripping and crimping
pressing force and compact design. machine processes taped ferrules with insu- machine CF 1000 processes loose (bulk)
Thanks to the adjustable pressing force and lating collars in accordance with ferrules with insulating collars in accordance
interchangeable dies, it is suitable for insu- DIN 46228-4. This device allows conduc- with DIN 46228-4. Using this machine,
lated cable lugs, tube lugs, and crimping wire tors with a cross section range conductors can be stripped and fitted with
lugs, as well as slip-on sleeves and ferrules of 0.25 - 2.5 mm2 to be stripped and fitted ferrules in one operation.
with a cross section of up to 50 mm2. with ferrules in one operation. The auto-
matic device can be adapted to various
cross sections in under a minute.

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 469

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Tools - TOOL fox
Automatic devices
Automatic cutting device Notes:
for conductors and cables An application video can be found in the download area for the rel-
evant product on our website at www.phoenixcontact.net/products.

Conductor cross sections from 0.25 to 10 mm²

Technical data
Dimensions Width Length Height
[mm] 195 295 230
– The automatic cutting device can be used General data
to cut conductors, cables, and similar Weight [kg] 11
Power consumption [VA] 80
profiles Cutting efficiency
– The desired length and number of cuts Finely stranded [mm2] 0.25 - 10
Solid strand [mm2] 0.25 - 2.5
can be specified in a user-friendly way via Max. throughput [mm] 8
the display Cross section setting automatic
– To insert the conductors all you have to Maximum number of cuts [Pcs.] 999
Length [mm] 2 ... 99999
do is swing open the front enclosing guard Feed rate [m/s] 0.5
– The drive and guide rolls automatically Unit of measurement mm/inch
adjust to each inserted diameter Dialog language German / English / French / Italian

– No adjustments are required thanks to Ordering data

the automatic “zero cut”, which is per- Pcs. /
formed when the start button is pressed Description   Type Order No.
Pkt.
Automatic cutting device, 230 V/50 Hz version, for conductors
and cables with a diameter of up to 8 mm, solid (up to 2.5 mm²) and
stranded (up to 10 mm²)
CUTFOX 10 1206829 1
Automatic cutting device, 120 V/60 Hz version, for conductors
and cables with a diameter of up to 8 mm, solid (up to 2.5 mm²) and
stranded (up to 10 mm²)
CUTFOX 10 120V 1206832 1

Accessories
Cable unwinders, for CUTFOX 10, for accommodating and gently
unwinding cable rings and coils, complete

CUTFOX 10 C-UN 1208393 1

Turntable, for CUTFOX 10 cable unwinders, for accommodating
cable rings and cable coils
CUTFOX 10 R-C 1208403 1
Retaining bolts, for CUTFOX 10 rotary table, 4 pcs.

CUTFOX 10 BAR 1208416 1

Replacement drive belt, for CUTFOX 10, 2 pcs.

CF-10 WHEEL SET 1207271 1

Spare knife set, for CUTFOX 10
CF-10 CUTTER KNIFE SET 1207284 1

470 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Tools - TOOL fox
Automatic devices
Stripping machine Notes:
An application video can be found in the download area for the rel-
evant product on our website at www.phoenixcontact.net/products.

Conductor cross sections from 0.08 to 6 mm²

Technical data
Dimensions Width Length Height
[mm] 141 363 221
– Compact stripping machine for automati- General data
cally stripping conductors with a cross Weight [kg] 9.5
Power consumption [VA] 160
section of 0.08 to 6 mm2 Working cycle [s] 0.3
– Multi-strand cables with a diameter of up Compression trapezoidal
Stripping power
to 6 mm can also be stripped Finely stranded [mm2] 0.08 - 6
– Partial stripping is supported Stripping length [mm] 3-20
– Even special types of insulation, such as Partial stripping length [mm] 2-20
Max. throughput [mm] 6
PTFE and silicone, can be stripped in addi-
tion to standard types Ordering data
– The clamping force automatically adjusts Pcs. /
Description   Type Order No.
itself to the required extraction force Pkt.

– Pressure points on sensitive insulation are Stripping machine, 230 V design, for conductors and cables,
solid and stranded 0.08 - 6 mm² (max. Ø 6 mm), with integrated
avoided graphic display
– The stripping dimensions are set individu-
WF 1000 1212149 1
ally via rotary buttons and shown visually Stripping machine, 120 V design, for conductors and cables,
on the large display solid and stranded 0.08 - 6 mm² (max. Ø 6 mm), with integrated
graphic display

WF 1000 120V 1212258 1

Accessories
Spare stripping knife, for WF 1000
WF 1000/SB 1212279 1

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 471

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Tools - TOOL fox
Automatic devices
Pneumatic crimping pliers

– These crimping pliers are pneumatic tools

for ferrules with a cross section range of
0.25 to 10 mm2
– The crimping pliers can process all types
of Phoenix Contact ferrules, from uninsu-
lated to insulated TWIN ferrules

Conductor cross sections Conductor cross sections from 0.25 to 4 mm²

from 0.25 to 2.5 mm²

Applied for:
GOST

Technical data Technical data

Application range
Conductor [mm2] / AWG 0.25 - 2.5 / 24 - 14 0.25 - 4 / 24 - 12
Pressure range [bar] 4-6 4-6
Air consumption per compression [l] 0.2 0.2
Compression trapezoidal trapezoidal

Ordering data Ordering data

Pcs. / Pcs. /
Description   Type Order No. Type Order No.
Pkt. Pkt.
Pneumatic crimp pliers, for ferrules as per DIN 46228

ZAP 25 1203110 1
Pneumatic crimping pliers, for ferrules according to DIN 46228,
three marked die stations, lateral entry

ZAP 40 1212630 1
Pneumatic crimp pliers, for ferrules as per DIN 46228

Pneumatic crimp pliers, for ferrules as per DIN 46228

Pneumatic crimp pliers, for ferrules as per DIN 46228

472 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Tools - TOOL fox
Automatic devices

Conductor cross sections from 4 to 10 mm² Conductor cross sections Conductor cross sections from 4 to 10 mm²
from 0.25 to 2.5 mm²

Applied for: Applied for: Applied for:

GOST GOST GOST

Technical data Technical data Technical data

4 - 10 / 12 - 8 0.25 - 2.5 / 24 - 14 4 - 10 / 12 - 8
4-6 4-6 4-6
0.2 0.2 0.2
trapezoidal trapezoidal trapezoidal

Ordering data Ordering data Ordering data

Pcs. / Pcs. / Pcs. /

Type Order No. Type Order No. Type Order No.
Pkt. Pkt. Pkt.

ZAP 100 1203259 1

ZAP 25 T 1203123 1

ZAP 100 T 1203262 1

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 473

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Tools - TOOL fox
Automatic devices
Portable crimping machine for Notes:
ferrules, cable lugs, and connectors See data sheet for further technical data.
For more information about dies, visit:
www.phoenixcontact.net/products.
An application video can be found in the download area for the rel-
evant product on our website at www.phoenixcontact.net/products.

Connectors up to 50 mm²

Technical data
Dimensions Width Length Height
[mm] 140 220 320
The CF 500 is characterized by a high General data
press capacity in a compact design. Weight [kg] 10
Power supply [V] 100 ... 240
Easy to replace dies for processing Power consumption [VA] 160
ferrules, cable lugs, and contacts: Pressure [kN] 10
Working cycle [s] 1
– Ferrules of up to 50 mm2
– TWIN ferrules up to 2 x 10 mm2 Ordering data
– Insulated cable lugs up to 6 mm2 Pcs. /
Description   Type Order No.
– Uninsulated cable lugs up to 6 mm2 Pkt.
– Tube lugs of up to 10 mm2 Crimping machine, 230 V version, with quantity counter and foot
switch
– Slip-on sleeves and flat plugs of up to 230 V version CF 500-230V 1208348 1
6 mm2 Crimping machine, 120 V version, with quantity counter and foot
– Turned contacts up to 10 mm2 switch
120 V version CF 500-120V 1208351 1
Easy assembly of FBS ... plug-in bridges
from the CLIPLINE complete system: Accessories
– FBS ...-4, FBS ...-5, FBS ...-6, CF 500 protective cover, without recess (for all dies without
assignment)
FBS ...-8 CF 500/COV 1212250 1
For ferrules of up to 6 mm² (AI 6...) CF 500/COV AI 6 1212254 1
For TWIN ferrules (AI-TWIN...) CF 500/COV AI TWIN 1212266 1
For insulated cable lugs (RCI..., TC4) CF 500/COV RCI 1212255 1
For tube lugs 0.5 - 10 mm² CF 500/COV RC 10 1212252 1
For tube lugs with a cross section of 0.34 - 2.5 mm² (SC...) CF 500/COV RCT 2,5 1212253 1

For slip-on sleeves and flat plugs SC 1,5... and SC 6... CF 500/COV SC 1212251 1

For FBS ... plug-in bridges CF 500/COV FBS 1212462 1

CF 500 Locator, for slip-on sleeves (SCF...)
Width: 2.8 mm, length: 5 mm
CF 500/LOC SCF 2,8/1,5 1212249 1
For slip-on sleeves (SCF...) Width: 4.8 mm CF 500/LOC SCF 4,8/2,5 1212248 1

For slip-on sleeves (SCF...) Width: 6.3 mm CF 500/LOC SCF 6,3/6 1212247 1

For slip-on sleeves (SCM...) 0.5 - 2.5 mm² CF 500/LOC SCM 6,3/2,5 1212264 1

474 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Tools - TOOL fox
Automatic devices
Dies for crimping machine

Ordering data

Pcs. /
Description   Type Order No.
Pkt.
CF 500 die, for ferrules (A... and AI...) 0.25 - 6 mm²

CF 500/DIE AI 6 1212238 1
For ferrules (A... and AI...) 10, 16, and 25  mm² CF 500/DIE AI 25 1212239 1

For ferrules (A... and AI...) 35 and 50  mm² CF 500/DIE AI 50 1212261 1

For TWIN ferrules (AI-TWIN...) 2 x 4, 2 x 6, and CF 500/DIE AI-TWIN 10 1212262 1
2 x 10 mm²
CF 500 die, for ferrules (A... and AI...) 0.25 - 6 mm²

For insulated cable lugs (RCI... and FCI...) 0.14 - CF 500/DIE RCI 1,5 1212263 1
 1.5 mm²
For insulated cable lugs (RCI... and FCI...) 0.5 - CF 500/DIE RCI 6 1212240 1
 6 mm²
For cable lugs (RC... and FC...) 0.5 - 10 mm² CF 500/DIE RC 10 1212244 1

For cable lugs (RC... and FC...) 16 mm² CF 500/DIE RC 16 1212257 1

CF 500 die, for ferrules (A... and AI...) 0.25 - 6 mm²

For slip-on sleeves and flat plugs (SCF... and CF 500/DIE SC 1,5 1212241 1
SCM...) 0.1 - 1.5 mm²

For slip-on sleeves and flat plugs (SCF... and CF 500/DIE SC 6 1212242 1
SCM...) 0.5 - 6 mm²
CF 500 die, for ferrules (A... and AI...) 0.25 - 6 mm²

For turned contacts with pin diameters 2.5 and CF 500/DIE TC 4 1212237 1
4.0 mm (CK 2,5,CK 4,0) 0.14 - 4 mm²

For turned contacts (CK 4.0) 6 - 10 mm² CF 500/DIE TC 10 1212260 1

CF 500 die, for assembling FBS ... plug-in bridges

For FBS ... plug-in bridges CF 500/DIE FBS 1212461 1

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 475

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Tools - TOOL fox
Automatic devices
CRIMPHANDY, portable hand-held Notes:
machine, for a 1.0 mm2 conductor An application video can be found in the download area for the rel-
cross section evant product on our website at www.phoenixcontact.net/products.

1.0 mm² conductor cross section

Technical data
Dimensions Width Length Height
[mm] 42 200 67
The product innovation for switchgear General data
manufacturing – the CRIMPHANDY. With Weight [kg] 0.43
Conductor [mm2] / AWG 1-1/-
this portable hand-held machine, you can Working cycle [s] 2
strip and crimp your conductors in under Compression Square crimp
two seconds – 75% less time than before. Ordering data
– The matching reel ferrules are suitable for
Pcs. /
use on all modular terminal blocks, partic- Description   Type Order No.
Pkt.
ularly those from the Portable hand-held machine, battery-powered, for ferrules,
CLIPLINE complete system: 1.0 mm², incl. battery and charger, 100 - 240 V,
in a robust aluminum case
– UT screw connection terminal blocks For standard PVC and PE conductors CF CRIMPHANDY 1,0 1212465 1
– ST spring-cage connection terminal
Accessories
blocks
Reel ferrules, 1.0 mm², 8 mm, with plastic sleeve,
– PT push-in connection terminal blocks according to DIN 46228-4, red, 50 pieces per strip
– COMBI plug-in connection solutions
AI 1,0-8 RD-S 1212523 50
– Detailed information regarding the advan- Replacement battery, for CF CRIMPHANDY...,
tages of the CRIMPHANDY can be found Li-ion 7.4 V, 0.76 Ah
CF CRIMPHANDY/ACCU 1212518 1
on page 388 Replacement charger, for CF CRIMPHANDY..., 100 - 240 V AC

CF CRIMPHANDY/CHARGER 1212519 1

476 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Tools - TOOL fox
Automatic devices
CRIMPHANDY, portable hand-held Notes:
machine, for a 1.5 mm2 conductor An application video can be found in the download area for the rel-
cross section evant product on our website at www.phoenixcontact.net/products.

1.5 mm² conductor cross section

Technical data
Dimensions Width Length Height
[mm] 42 200 67
The product innovation for switchgear General data
manufacturing – the CRIMPHANDY. With Weight [kg] 0.43
Conductor [mm2] / AWG 1.5 - 1.5 / -
this portable hand-held machine, you can Working cycle [s] 2
strip and crimp your conductors in under Compression Square crimp
two seconds – 75% less time than before. Ordering data
– The matching reel ferrules are suitable for
Pcs. /
use on all modular terminal blocks, Description   Type Order No.
Pkt.
particularly those from the Portable hand-held machine, battery-powered, for ferrules,
CLIPLINE complete system: 1.5 mm², incl. battery and charger, 100 - 240 V,
in a robust aluminum case
– UT screw connection terminal blocks For standard PVC and PE conductors CF CRIMPHANDY 1,5 1212466 1
– ST spring-cage connection terminal
Accessories
blocks
Reel ferrules, 1.5 mm², 8 mm, with plastic sleeve,
– PT push-in connection terminal blocks according to DIN 46228-4, red, 50 pieces per strip
– COMBI plug-in connection solutions
AI 1,5-8 BK-S 1212524 50
Replacement battery, for CF CRIMPHANDY...,
Li-ion 7.4 V, 0.76 Ah
CF CRIMPHANDY/ACCU 1212518 1
Replacement charger, for CF CRIMPHANDY...,
100 - 240 V AC
CF CRIMPHANDY/CHARGER 1212519 1

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 477

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Tools - TOOL fox
Automatic devices
Portable automatic stripping and Notes:
crimping device for taped products An application video can be found in the download area for the rel-
evant product on our website at www.phoenixcontact.net/products.

Conductor cross sections

from 0.25 to 2.5 mm²

Technical data
Dimensions Width Length Height
[mm] 165 320 300
– The compact stripping and crimping General data
machine can be used to process taped fer- Weight [kg] 12
Application range
rules with insulating collars in accordance Conductor [mm2] / AWG 0.25 - 2.5 / 24 - 14
with DIN 46228-4 Power consumption [VA] 80
Working cycle [s] 1.2
– Up to 1200 conductors can be processed Compression trapezoidal
an hour
Ordering data
– The conductor is stripped in a single op-
eration and is crimped with a ferrule to a Description   Type Order No.
Pcs. /
Pkt.
high standard of quality
– Particularly suitable for pre-assembling Stripping and crimping machine, 230 V design, for insulated
taped ferrules 0.25 - 2.5 mm², stripping length 8 mm,
conductors incl. the conversion kits 0.5 - 2.5 mm²
– Thanks to its compact and lightweight de- CF 3000-2,5 1205477 1
sign, it can also be used as a portable Stripping and crimping machine, 120 V design, for insulated
solution for transport between different taped ferrules 0.25 - 2.5 mm², stripping length 8 mm,
incl. the conversion kits 0.5 - 2.5 mm²
work locations
– The automatic device can be adapted to CF 3000-2,5 120V 1205516 1

various cross sections in under a minute Accessories

– Color coding in accordance with ferrule Expansion set, complete, for CF 3000, for taped insulated
ferrules, 0.25/0.34 mm², stripping length 8 mm
standard DIN 46228-4 makes the
assignment of modification components
CF 3000-TOOLKIT 0,25 1212376 1
really clear Spare locator,
The suitable taped ferrules support the 0.25 mm² CF 3000 LOC 0,25 1212377 1
use of all modular terminal blocks, especially 0.5 mm2 CF 3000 LOC 0,5 1205639 1
0.75 mm2 CF 3000 LOC 0,75 1205642 1
from the CLIPLINE complete system: 1.0 mm2 CF 3000 LOC 1,0 1205655 1
– UT screw terminal blocks 1.5 mm2 CF 3000 LOC 1,5 1205668 1
– ST spring-cage terminal blocks 2.5 mm2 CF 3000 LOC 2,5 1205671 1
Spare knife, 0.25 mm², adjustable
– PT push-in connection terminal blocks 0.25 mm², adjustable CF 3000 AB 0,25 1212380 1
– COMBI plug-in connection solutions 0.5 mm² CF 3000 AM 0,5 1205587 1
0.75 mm2 CF 3000 AM 0,75 1205590 1
1.0 mm² CF 3000 AM 1,0 1205600 1
1.5 mm² CF 3000 AM 1,5 1205613 1
2.5 mm² CF 3000 AM 2,5 1205626 1

478 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Tools - TOOL fox
Automatic devices
Ferrules with plastic sleeve, taped,
for the CF 3000-2,5 crimping machine
b

– The taped ferrules have been developed h

specifically for the CF 3000-2,5 crimping

machine
– Available in the main color ranges up to

d
k
2.5 mm2

j
– Can be used to wire all modular terminal

i
blocks, especially those of the
CLIPLINE complete system

Conductor cross sections from 0.25 to 8 mm²

Technical data Technical data

General data
Material / coating E-CU / tin-plated (galvanic)
Plastic sleeve material polypropylene
Long/short-term temperature 105°C / 120°C

Ordering data
Description Cross section Color Dimensions [mm] Pcs. /
Type Order No.
[mm2] AWG a b d h i j k Pkt.
Taped ferrule, with plastic sleeve,
color range as per DIN 46228-4: 1990-09, CSA-certified

0.25 22 yellow - 14.00 2.20 8.00 0.25 0.15 0.80 AI 0,25-8 YE-B 3240251 1000
0.5 20 white - 14.00 2.50 8.00 0.25 0.15 1.10 AI 0,5 - 8 WH-B 3201369 1000
0.75 18 gray - 14.00 2.80 8.00 0.25 0.15 1.30 AI 0,75- 8 GY-B 3201372 1000
1 18 red - 14.00 3.00 8.00 0.30 0.15 1.50 AI 1 - 8 RD-B 3201385 1000
1.5 16 black - 14.00 3.40 8.00 0.30 0.15 1.80 AI 1,5 - 8 BK-B 3201398 1000
2.5 14 blue - 14.00 4.20 8.00 0.30 0.15 2.30 AI 2,5 - 8 BU-B 3201408 500
Taped ferrules, with plastic sleeve,
color code as per NF C 63-023: 1994-02, CSA-certified

0.75 18 blue - 14.00 2.80 8.00 0.25 0.15 1.30 AI 0,75- 8 BU-B 3201547 1000
2.5 14 gray - 14.00 4.20 8.00 0.30 0.15 2.30 AI 2,5 - 8 GY-B 3201550 500
Taped ferrules, with plastic sleeve, special colors, CSA-certified

0.25 22 blue - 14.00 2.20 8.00 0.25 0.15 0.80 AI 0,25-8 BU-B 3240250 1000
0.34 22 turquoise - 14.00 2.20 8.00 0.25 0.15 0.80 AI 0,34-8 TQ-B 3240249 1000
0.5 20 orange - 14.00 2.50 8.00 0.25 0.15 1.10 AI 0,5 - 8 OG-B 3201563 1000
0.75 18 white - 14.00 2.80 8.00 0.25 0.15 1.30 AI 0,75- 8 WH-B 3201576 1000
1 18 yellow - 14.00 3.00 8.00 0.30 0.15 1.50 AI 1 - 8 YE-B 3201589 1000
1.5 16 red - 14.00 3.40 8.00 0.30 0.15 1.80 AI 1,5 - 8 RD-B 3201592 1000

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 479

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Tools - TOOL fox
Automatic devices
Stripping and crimping machine for
bulk goods

Conductor cross sections from 0.34 to 4 mm²

Technical data
Dimensions Width Length Height
[mm] 240 490 390
– The stripping and crimping machine can General data
be used to process loose ferrules with Weight [kg] 29
Power supply [V] 100 ... 240
insulating collars in accordance with Air consumption per compression [l] 1.2
DIN 46228-4 Working cycle [s] 1.5
Compression trapezoidal
– Up to 1200 conductors can be processed
an hour Ordering data
– The conductor is stripped in a single Pcs. /
Description   Type Order No.
operation and is crimped with a ferrule to Pkt.
a high standard of quality Stripping and crimping machine, 100 - 230 V version, electro-
pneumatic, for loose ferrules with insulating collar, 0.34 - 4 mm²,
– The extraction forces conform to the incl. conversion kits 0.5 - 1.5 mm² (stripping length 8 mm)
requirements of IEC/EN 60999 and
IEC/EN 60947 CF 1000-1,5 1208199 1
Other key features of the automatic
Accessories
device are as follows:
Extension kit, complete, for CF 1000, for loose ferrules with insu-
– Robust design lating collar
– Quick change of cross section without 0.25/0.34 mm², stripping length: 6 mm CF 1000-TOOLKIT 0,34/ 6 1208212 1
0.25/0.34 mm², stripping length 8 mm CF 1000-TOOLKIT 0,34/ 8 1208225 1
the need for additional adjustments 2.5 mm², stripping length 8 mm CF 1000-TOOLKIT 2,5/ 8 1208241 1
– Quantity counter 4 mm², stripping length 10 mm CF 1000-TOOLKIT 4,0/10 1208270 1
– Suitable for bulk processing Spare knife, V-form, for CF 1000
CF 1000 EM 1205215 1
Protective cover, for CF 1000
CF 1000-COVER 1208306 1

480 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Tools - TOOL fox
Automatic devices
Stripping and crimping machine for
bulk goods

– The stripping and crimping machine can

be used to process loose ferrules with
insulating collars in accordance with
DIN 46228-4
– Up to 1200 conductors can be processed
an hour
– The conductor is stripped in a single op-
eration and is crimped with a ferrule to a
high standard of quality
– The extraction forces conform to the Conductor cross section of 4 / 6 / 10 mm²
requirements of IEC/EN 60999 and
IEC/EN 60947
Other key features of the automatic

device are as follows:
– Robust design Technical data
– Quick change of cross section without Dimensions Width Length Height
the need for additional adjustments [mm] 240 490 390
– Quantity counter General data
Weight [kg] 29
– Suitable for bulk processing Power supply [V] 100 ... 240
Air consumption per compression [l] 1.2
Working cycle [s] 1.5
Compression trapezoidal

Ordering data

Pcs. /
Description   Type Order No.
Pkt.
Stripping and crimping machine, 100 - 230 V version, electro-
pneumatic, for loose ferrules with insulating collar, 4 mm², 6 mm²,
and 10 mm², without conversion kit 

CF 1000-10 1212456 1

Accessories
Conversion kit, complete, for CF 1000-10, for loose ferrules with
insulating collar
4 mm², stripping length: 10 - 12 mm CF 1000-10-TOOLKIT 4/10-12 1212458 1
6 mm², 12 mm stripping length CF 1000-10-TOOLKIT 6/12 1212459 1
10 mm², 12 mm stripping length CF 1000-10-TOOLKIT 10/12 1212460 1
Spare knife, V-form, for CF 1000
CF 1000 EM 1205215 1
Protective cover, for CF 1000
CF 1000-COVER 1208306 1

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 481

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
482 PHOENIX CONTACT
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Installation and mounting material - CABINET add-on

The installation of switchgear and control    

Product range overview  
cabinets need not be time-consuming and
occupy a large amount of space if suitable    
Installation and mounting material 484
mounting devices are used and the right
tool is selected. We offer a comprehensive
range of products for this.    
The CABINET add-on range includes Component mounting  
mounting material and mounting devices for   NS 15, NS 35, and NS 32 DIN rails 486 
all aspects of control cabinet installation.   End brackets for DIN rails 498 
DIN rails and end brackets, for example, en-
sure the secure attachment of electrical   Marking for terminal strips 500 
connecting elements and components in-   Brackets for mounting on DIN rails 502 
side the control cabinet.   Adapter and support 503 
Additional security is assured by cover
profiles, while shield connection clamps en-    
Busbars  
able EMC-compliant wiring.
The cable management product range   Neutral busbar 508 
spans from the innovative CES space- and   Power and branch terminal blocks 509 
cost-saving cable entry system, across the   Connection terminal blocks for busbars 510 
extensive range of cable protection systems
and cable ducts, right up to cable binders for    
every application. Connection terminal blocks and sockets  
  Europe connectors 512 
  Junction box connectors 516 
  Sockets 518 
   
Shielding 520
  Shield connection clamps 522 
  Supports 524 
      
   
Cable management  
   
CES cable entry system 532
   
Cable routing 542
  Cable ducts 543 
  Scissors and cutters 546 
  Cable clamps for DIN rail 547 
   
Cable protection  
  Protective hoses and screw connections 548 
  Accessories 566 
   
Cable bundling  
  Cable binders 572 

PHOENIX CONTACT 483

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Installation and mounting material - CABINET add-on
Component mounting

You can save time when securing electri- End brackets are used for a secure lateral There is a wide range of cover profiles to
cal connections and components in switch- hold on the components, especially in the ensure the necessary level of safety.
gear by using suitable mounting devices. By event of jolts and vibrations in the systems. The wide choice of cable ducts provides us-
combining the mounting accessories appro- Depending on the application, they must ei- ers with flexible and straightforward cable
priately, you can make optimum use of the ther be fastened using screws or can simply installation solutions that simply involve
space inside the control cabinet. DIN rails be snapped onto the DIN rails as in the case breaking out the lateral segments without
form the basis for the “insides” of the con- of the CLIPFIX series. Marker carriers can the need for tools.
trol cabinet. They ensure that the DIN rail- be snapped onto the end brackets for great- The assembly material is rounded off by
mountable components are held securely. er clarity and to create a visual distinction installation materials that include pick-off
Phoenix Contact offers a wide range of between individual terminal strip blocks. terminal blocks, Europe connectors, and
standardized rails made from various mate- junction box connectors.
rials. On request, they can be supplied cut
to length and with pre-drilled holes. The
range is rounded off by cable clamps and
corresponding rails.

484 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Installation and mounting material - CABINET add-on
Component mounting

For control cabinet engineering applica- Used in conjunction with the NS 15 and Cover profiles are used to cover live parts
tions, the key features of the NS 15 and NS 35 DIN rails, the end brackets ensure and also provide protection against acciden-
NS 35 DIN rails are their high degree of di- that the components remain securely at- tal actuation of terminal points or discon-
mensional accuracy and double surface tem- tached to the rails. A comprehensive range nect terminal blocks.
pering. They are galvanized and feature thick of end brackets is available for specific
layer passivation, which makes them RoHS applications.
compliant.

Phoenix Contact offers various connec- The wide range of Europe terminal blocks The rail-mountable socket in a standard
tion terminal blocks, branch terminal includes terminal blocks with and without format is as much a must in modern switch-
blocks, and power terminal blocks for wire protection. The individual positions gear as in simple distributors. The socket is
busbars in switchgear and control gear. can be separated easily by twisting without mounted in an exposed position to allow
the need for tools. The push-in connection assembly tools, service devices, and other
technology of the junction box connector electrical equipment to be installed
series means that solid conductors or con- conveniently.
ductors with ferrules can be inserted into
the terminal point with ease. Low insertion
forces and high pull-out forces ensure a
secure connection.

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 485

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Installation and mounting material - CABINET add-on
Component mounting
DIN rails NS 15, flat design Notes:
For dimensional drawings and ordering examples, see page 497.
For PPS ... DIN rail profile cutters, see page 372.
1) Please specify the desired length in millimeters when placing

your order. See order example.

2) Please specify the desired length and borehole when placing

your order. See order example.

Unperforated, zinc plated,

and thick layer passivated

Technical data
General data
Material / coating Steel / galvanized, thick layer passivated
– The design of the DIN rails complies with
Ordering data
European standard EN 60715
– Particular attention has been paid to a Description Color Type Order No.
Pcs. /
Pkt.
high degree of dimensional accuracy and
DIN rail, unperforated, in accordance with
surface tempering EN 60715 - 15 x 5.5 mm, galvanized and thick layer passivated,
– All DIN rails are also available cut to supply length: 2 m
silver NS 15 UNPERF 2000MM 1401695 5
length DIN rail, unperforated in accordance with
EN 60715 - 15 x 5.5 mm, galvanized and thick layer passivated, cut
to length according to customer specifications1)
The DIN rails are available with various silver NS 15 UNPERF/... 1208089 1
surface coatings and are suitable for the fol- DIN rail, unperforated in acc. with EN 60715 - 15 x 5.5 mm,
lowing applications: galvanized and thick layer passivated, cut to length acc. to
customer specifications and provided with mounting holes2)
– Zinc plated, for indoor applications
– White passivated, for indoor applications silver NS 15 UNPERF/SO/... 1208092 1
DIN rail, perforated, in accordance with EN 60715 - 15 x 5.5 mm,
– Zinc plated and thick layer passivated, for galvanized and thick layer passivated, supply length: 2 m
indoor and protected outdoor applica-
silver
tions DIN rail, perforated in accordance with EN 60715 - 15 x 5.5 mm,
– Aluminum; as a result of their improved galvanized and thick layer passivated, cut to length according to
customer specifications1)
conductivity, these versions can also be
used as PEN busbars silver
DIN rail, perforated, dimensions according to
EN 60715 - 15 x 5.5 mm, white passivated, flat design, supply
length: 2 m

white
DIN rail, perforated, dimensions in acc. with
EN 60715 - 15 x 5.5 mm, supply length: 2 m, material: aluminum

silver

486 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Installation and mounting material - CABINET add-on
Component mounting

Perforated, zinc plated, Perforated, white passivated Perforated, aluminum

and thick layer passivated

Technical data Technical data Technical data

Steel / galvanized, passivated with a thick layer Steel / galvanized, white passivated Aluminum / uncoated

Ordering data Ordering data Ordering data

Pcs. / Pcs. / Pcs. /

Type Order No. Type Order No. Type Order No.
Pkt. Pkt. Pkt.

NS 15 PERF 2000MM 1401682 5

NS 15 PERF/... 1208102 1

NS 15 WH PERF 2000MM 1204096 5

NS 15 AL PERF 2000MM 1401763 5

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 487

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Installation and mounting material - CABINET add-on
Component mounting
NS 15 DIN rails, flat design Notes:
For dimensional drawings and ordering examples, see page 497.
For PPS ... DIN rail profile cutters, see page 372.
1) Please specify the desired length in millimeters when placing

your order. See order example.

2) Please specify the desired length and borehole when placing

your order. See order example.

Unperforated, zinc plated,

and thick layer passivated

Technical data
General data
Material / coating Steel / galvanized, thick layer passivated
– The design of the DIN rails complies with
Ordering data
European standard EN 60715
– Particular attention has been paid to a Description Color Type Order No.
Pcs. /
Pkt.
high degree of dimensional accuracy and
DIN rail, unperforated, in acc. with EN 60715 - 35 x 7.5 mm,
surface tempering galvanized and thick layer passivated, flat design,
– All DIN rails are also available cut to supply length: 2 m
silver NS 35/ 7,5 UNPERF 2000MM 0801681 5
length DIN rail, unperforated in accordance with EN 60715 - 35 x 7.5
mm, galvanized and thick layer passivated, flat design, cut to length
according to customer specifications1)
The DIN rails are available with various
surface coatings and are suitable for the silver NS 35/ 7,5 UNPERF/... 1208115 1
following applications: DIN rail, unperforated in accordance with EN 60715 - 35 x 7.5
mm, galvanized and thick layer passivated, flat design, cut to length
– Zinc plated, for indoor applications according to customer specifications and provided with mounting
holes2)
– White passivated, for indoor applications silver NS 35/ 7,5 UNPERF/SO/... 1208128 1
– Zinc plated and thick layer passivated, for DIN rail, unperforated, dimensions according to EN 60715 - 35 x
indoor and protected outdoor 7.5 mm, white passivated, flat design, supply length: 2 m

applications
– Aluminum; as a result of their improved white
DIN rail, unperforated, dimensions in acc.
conductivity, these versions can also be with EN 60715 - 35 x 7.5 mm, galvanized, flat design,
used as PEN busbars supply length: 2 m

silver
DIN rail, unperforated, dimensions in acc.
with EN 60715 - 35 x 7.5 mm, flat design, supply length: 2 m,
Material: copper

copper-colored

Accessories
DIN rail end piece
for DIN rail NS35/7,5 NS 35/ 7,5 CAP 1206560 100

488 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Installation and mounting material - CABINET add-on
Component mounting

Unperforated, white passivated Unperforated, zinc plated Unperforated, copper

Technical data Technical data Technical data

Steel / galvanized, white passivated Steel / galvanized Copper / uncoated

Ordering data Ordering data Ordering data

Pcs. / Pcs. / Pcs. /

Type Order No. Type Order No. Type Order No.
Pkt. Pkt. Pkt.

NS 35/ 7,5 WH UNPERF 2000MM 1204122 5

NS 35/ 7,5 ZN UNPERF 2000MM 1206434 5

NS 35/ 7,5 CU UNPERF 2000MM 0801762 5

Accessories Accessories Accessories

NS 35/ 7,5 CAP 1206560 100 NS 35/ 7,5 CAP 1206560 100 NS 35/ 7,5 CAP 1206560 100

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 489

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Installation and mounting material - CABINET add-on
Component mounting
NS 35 DIN rails, flat design

Notes:
For dimensional drawings and ordering examples, see page 497.
For PPS ... DIN rail profile cutters, see page 372.

Unperforated, aluminum Unperforated, stainless steel

Technical data Technical data

General data
Material / coating Aluminum / uncoated Stainless steel V2A / uncoated

Ordering data Ordering data

Pcs. / Pcs. /
Description Color Type Order No. Type Order No.
Pkt. Pkt.
DIN rail, unperforated, dimensions in acc.
with EN 60715 - 35 x 7.5 mm, flat design, supply length: 2 m,
Material: aluminum

silver NS 35/ 7,5 AL UNPERF 2000MM 0801704 5

DIN rail, unperforated, dimensions in acc.
with EN 60715 - 35 x 7.5 mm, flat design, supply length: 2 m,
Material: stainless steel V2A

silver NS 35/ 7,5 V2A UNPERF 2000MM 0801377 5

Accessories Accessories
DIN rail end piece
for DIN rail NS35/7,5 NS 35/ 7,5 CAP 1206560 100 NS 35/ 7,5 CAP 1206560 100

490 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Installation and mounting material - CABINET add-on
Component mounting
NS 35 DIN rails, flat design,
perforated

Notes:
For PPS ... DIN rail profile cutters, see page 372
1) Please specify the desired length in millimeters when placing

your order. See order example.

Perforated, zinc plated, Perforated, zinc plated

and thick layer passivated

Technical data Technical data

General data
Material / coating Steel / galvanized, thick layer passivated Steel / galvanized

Ordering data Ordering data

Pcs. / Pcs. /
Description Color Type Order No. Type Order No.
Pkt. Pkt.
DIN rail, perforated, in acc. with EN 60715 - 35 x 7.5 mm,
galvanized and thick layer passivated, flat design,
supply length: 2 m

silver NS 35/ 7,5 PERF 2000MM 0801733 5

DIN rail, perforated, in accordance with EN 60715 - 35 x 7.5 mm,
galvanized and thick layer passivated, flat design,
for cabinet width / depth of 0.8 m

Length: 755 mm silver NS 35/ 7,5 PERF 755MM 1207640 10

For cabinet width / depth of 1.2 m, supply length: silver NS 35/ 7,5 PERF 1155MM 1207666 10
1155 mm
DIN rail, perforated in accordance with EN 60715 - 35 x 7.5 mm,
galvanized and thick layer passivated, flat design,
cut to length according to customer specifications1)

silver NS 35/ 7,5 PERF/... 1208131 1

DIN rail, perforated, dimensions in acc.
with EN 60715 - 35 x 7.5 mm, galvanized, flat design,
supply length: 2 m

silver NS 35/ 7,5 ZN PERF 2000MM 1206421 5

DIN rail, perforated, in accordance with EN 60715 - 35 x 7.5 mm,
galvanized and thick layer passivated, flat design,
for cabinet width / depth of 0.8 m

Length: 755 mm silver NS 35/ 7,5 PERF 755MM 1207640 10

Accessories Accessories
DIN rail end piece
for DIN rail NS35/7,5 NS 35/ 7,5 CAP 1206560 100 NS 35/ 7,5 CAP 1206560 100

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 491

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Installation and mounting material - CABINET add-on
Component mounting
NS 35 DIN rails, tall design

Notes:
For dimensional drawings and ordering examples, see page 497.
For PPS ... DIN rail profile cutters, see page 372.
1)Please specify the desired length in millimeters when placing
your order. See order example.
2)Please specify the desired length and borehole when placing
your order. See order example.

Unperforated, zinc plated, Unperforated, white passivated

and thick layer passivated

Technical data Technical data

General data
Material / coating Steel / galvanized, thick layer passivated Steel / galvanized, white passivated

Ordering data Ordering data

Pcs. / Pcs. /
Description Color Type Order No. Type Order No.
Pkt. Pkt.
DIN rail, unperforated, in acc. with EN 60715 - 35 x 15 mm,
galvanized and thick layer passivated, tall design,
supply length: 2 m

silver NS 35/15 UNPERF 2000MM 1201714 5

DIN rail, unperforated in accordance
with EN 60715 - 35 x 15 mm, galvanized and thick layer passivated,
tall design, cut to length according to customer specifications1)

silver NS 35/15 UNPERF/... 1208144 1

DIN rail, unperforated in accordance
with EN 60715 - 35 x 15 mm, galvanized and thick layer passivated,
tall design, cut to length according to customer specifications and
provided with mounting holes2)
silver NS 35/15 UNPERF/SO/... 1208157 1
DIN rail, unperforated, similar to EN 60715 - 35 x 15 mm, 1.5 mm
thick, white passivated, tall design, supply length: 2 m

white NS 35/15 WH UNPERF 2000MM 1204135 5

DIN rail, unperforated similar to EN 60715 - 35 x 15 mm,
1.5 mm thick, tin-plated, tall design, supply length: 2 m

silver
DIN rail, unperforated similar to EN 60715 - 35 x 15 mm,
1.5 mm thick, tall design, supply length: 2 m, material: copper

copper-colored
DIN rail, unperforated in accordance
with EN 60715 - 35 x 15 mm, 2.3 mm thick, galvanized and thick
layer passivated, tall design, for universal cut, supply length: 2 m

silver

Accessories Accessories

for DIN rail NS35/15 NS 35/15 CAP 1206573 100 NS 35/15 CAP 1206573 100

492 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Installation and mounting material - CABINET add-on
Component mounting

Unperforated, zinc plated Unperforated, copper Unperforated, zinc plated, and thick layer
passivated, material thickness 2.3 mm

Technical data Technical data Technical data

Steel / galvanized Copper / uncoated Steel / galvanized, thick layer passivated

Ordering data Ordering data Ordering data

Pcs. / Pcs. / Pcs. /

Type Order No. Type Order No. Type Order No.
Pkt. Pkt. Pkt.

NS 35/15 ZN UNPERF 2000MM 1206586 5

NS 35/15 CU UNPERF 2000MM 1201895 5

NS 35/15-2,3 UNPERF 2000MM 1201798 5

Accessories Accessories Accessories

NS 35/15 CAP 1206573 100 NS 35/15 CAP 1206573 100

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 493

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Installation and mounting material - CABINET add-on
Component mounting
NS 35 DIN rails, tall design, Notes:
perforated For dimensional drawings and ordering examples, see page 497.
For PPS ... DIN rail profile cutters, see page 372.
1) Please specify the desired length in millimeters when placing

your order. See order example.

Perforated, zinc plated,

and thick layer passivated

Technical data
General data
Material / coating Steel / galvanized, thick layer passivated
– The design of the DIN rails complies with
Ordering data
European standard EN 60715
– Particular attention has been paid to a Description Color Type Order No.
Pcs. /
Pkt.
high degree of dimensional accuracy and
DIN rail, perforated, in acc. with EN 60715 - 35 x 15 mm, galva-
surface tempering nized and thick layer passivated, tall design,
– All DIN rails are also available cut to supply length: 2 m
length silver NS 35/15 PERF 2000MM 1201730 5
DIN rail, perforated, in accordance with EN 60715 - 35 x 15 mm,
galvanized and thick layer passivated, tall design,
The DIN rails are available with various for cabinet width / depth of 0.8 m
surface coatings and are suitable for the Length: 755 mm silver NS 35/15 PERF 755MM 1207679 10
following applications: For cabinet width / depth of 1.0 m, supply length:
955 mm
silver NS 35/15 PERF 955MM 1207682 10

– Zinc plated, for indoor applications For cabinet width / depth of 1.2 m, supply length: silver NS 35/15 PERF 1155MM 1207695 10
– White passivated, for indoor applications 1155 mm
DIN rail, perforated in accordance with EN 60715 - 35 x 15 mm,
– Zinc plated and thick layer passivated, for galvanized and thick layer passivated, tall design,
indoor and protected outdoor supply length: 2 m,
cut to length according to the customer specifications1)
applications silver NS 35/15 PERF/... 1208160 1
– Aluminum and copper. As a result of their DIN rail, perforated, according to EN 60715 - 35 x 15 mm,
white passivated, tall design, supply length: 2 m
improved conductivity, these versions can
also be used as PEN busbars white
DIN rail, perforated similar to EN 60715 - 35 x 15 mm,
1.5 mm thick, tin-plated, tall design, supply length: 2 m

silver

494 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Installation and mounting material - CABINET add-on
Component mounting

Perforated, white passivated Unperforated, zinc plated

Technical data Technical data

Steel / galvanized, white passivated Steel / galvanized

Ordering data Ordering data

Pcs. / Pcs. /
Type Order No. Type Order No.
Pkt. Pkt.

NS 35/15 WH PERF 2000MM 0806602 5

NS 35/15 ZN PERF 2000MM 1206599 5

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 495

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Installation and mounting material - CABINET add-on
Component mounting
NS 32 DIN rails

Notes:
For PPS ... DIN rail profile cutters, see page 372.

Unperforated, galvanized,
and thick layer passivated
Technical data
General data
Material / coating Steel / galvanized, thick layer passivated

Ordering data

Pcs. /
Description Color Type Order No.
Pkt.
DIN rail, unperforated, in accordance with EN 60715 - G32,
supply length: 2 m, galvanized and thick layer passivated

silver NS 32 UNPERF 2000MM 1201015 5

DIN rail, perforated, in accordance with EN 60715 - G32,
galvanized and thick layer passivated, supply length: 2 m

silver NS 32 PERF 2000MM 1201002 5

NS 35 DIN rails, tall design that Notes:

supports the use of slide nuts For dimensional drawings and ordering examples, see page 497.

– The NS 35/15 AL DIN rail has been de-

signed to accommodate GLM ... slide nuts
– The slide nuts even allow components
without an additional snap-on foot to be
mounted

NS 35, 15 mm high DIN rail with slide nut guide

Technical data
Dimensions Width Length Height
[mm] 35 2000 15
General data
Material Aluminum

Ordering data

Pcs. /
Description Color Type Order No.
Pkt.
DIN rail, unperforated similar to EN 60715 - 35 x 15 mm,
deep-drawn, tall design, with slide nut guide, supply length: 2 m

silver NS 35/15 AL UNPERF 2000MM 1201756 5

DIN rail, unperforated similar to EN 60715 - 35 x 15 mm,
deep-drawn, tall design, with slide nut guide,
cut to length according to customer specifications
silver NS 35/15 AL UNPERF/... 1210213 1
Slide nut, for DIN rail NS 35/15-AL, for fixing devices,
material: steel
M4 silver GLM 4 1201769 100
M5 silver GLM 5 1201772 100
M6 silver GLM 6 1201785 100
496 PHOENIX CONTACT
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Installation and mounting material - CABINET add-on
Component mounting
Example configuration for
NS 35/15 UNPERF/SO/...: L
(minimum order quantity 20 units) L B

When ordering 20 unperforated NS 35/15 DIN Pcs. Order Length Dim. Dim. Dim.
No. in mm A B C
rails with 6 mm ø end holes at both ends

A
(as 20 mm elongated holes, the hole center of
20 / 1208157 / 550 / 6 / 50 / 20
which is 50 mm from the end of the rail) with a
length of 550 mm, the following information
must be given:
L
B

Example configuration for

A
NS 35/7,5 UNPERF/...:
(minimum order quantity 20 units)
C
When ordering 20 unperforated NS 35/7,5 DIN Pcs. Order No. Length in mm
rails without end holes with a length of L = length
A = hole diameter [mm]
1750 mm, the following information must be 20 / 1208115 / 1750 B = distance between end and hole center [mm]
given: C = length of elongated hole [mm]
The following dimensions are possible:
Round hole: C = 0
Elongated hole: C = 10, 15, 20 or 25 mm

Dimensional drawings for DIN rails

35
25

16,5 14,5
5

0,7
6,5
35
1,5

0,8

15 35
7,5
1

15°
R 0,2 R 1,25
6

R 0,8

15
R2

2
15

15

15°
5,5

1,6
R 0,5
1,5

R 0,8 R 1,25
10,5 32 27 27 19,8
25
4,2 6,2 6,2 6,2
NS 35/15-AL
12,2

35
15

15
15

1
25

25

R 1,2
20

10

15°
15

R 1,2
2,3

24

NS 15 NS 32 NS 35/7,5 NS 35/15 NS 35/15-2,3

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 497

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Installation and mounting material - CABINET add-on
Component mounting
Snap-on end bracket, for NS 15 and
NS 35 DIN rails

– Phoenix Contact has engineered its

CLIPFIX end brackets to maintain a
secure grip on the various
DIN rail systems
– Design width of just 5.2 mm
– Parking facility for bridges and plugs
– Large area for labeling

End bracket for NS 15 DIN rail End bracket for NS 35 DIN rail

Technical data Technical data

Dimensions Width Length Height Width Length Height
[mm] 5.2 22 22.6 5.15 48.5 35
General data
Material PA PA
Inflammability class according to UL 94 V2 V2

Ordering data Ordering data

Pcs. / Pcs. /
Description Color Type Order No. Type Order No.
Pkt. Pkt.
End bracket, for snapping onto NS 15, 5.2 mm wide, labeling with
ZB 5 and ZBF 5, KLM, parking facilities for bridges and
test accessories
gray CLIPFIX 15 3022263 50
End bracket, for snapping onto NS 35, 5.15 mm wide, can be
marked with ZB 5 and UCT-EM (30X5), parking option
for bridges and test plugs
gray CLIPFIX 35-5 3022276 50
End bracket, for snapping onto NS 35, 9.5 mm wide, can be
labeled
gray CLIPFIX 35 3022218 50

Screw-on end bracket, for NS 35 and

NS 32 DIN rails

– With universal foot for NS 35 and NS 32

DIN rails
– Tall and flat designs
– Large area for labeling

For NS 35 and NS 32 DIN rails For multi-level terminal blocks on NS 35 and
NS 32 DIN rails
Technical data Technical data
Dimensions Width Length Height Width Length Height
[mm] 9.5 50.5 35.3 10 55.5 50
General data
Material PA PA
Tightening torque [Nm] 0.4 - 0.5 0.4 - 0.5
Inflammability class according to UL 94 V2 V2

Ordering data Ordering data

Pcs. / Pcs. /
Description Color Type Order No. Type Order No.
Pkt. Pkt.
End bracket, to screw on, for NS 35 and NS 32,
can be labeled with ZB 6, KLM, KLM-A, and UBE

gray E/UK 1201442 50

Universal end bracket, to screw on, for NS 35 and NS 32,
for supporting the ends of double-level and three-level terminal
blocks, can be labeled with ZB 10
gray E/UK 1 1201413 50

498 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Installation and mounting material - CABINET add-on
Component mounting
Screw-on end bracket,
for NS 15 DIN rail

The E/MBK end bracket has been specially

designed for the MBK miniature
IEC terminal blocks.
– Can be screwed onto NS 15 DIN rails
– Can be mounted directly on the mounting
plate as an MBK terminal block base
– Large area for labeling

For miniature IEC terminal blocks For NS 15 DIN rail

on NS 15 DIN rail
Technical data Technical data
Dimensions Width Length Height Width Length Height
[mm] 6.1 22 11.4 6.1 21.2 18
General data
Material PA PA
Tightening torque [Nm] 0.4 - 0.5 0.4 - 0.5
Inflammability class according to UL 94 V2 V2

Ordering data Ordering data

Pcs. / Pcs. /
Description Color Type Order No. Type Order No.
Pkt. Pkt.
End bracket, for snapping onto NS 15, for slide-on miniature termi-
nal blocks, can be fastened with a screw, can be labeled with KLM 1

gray E/MBK 1401637 100

End bracket, for screwing onto NS 15, 6.1 mm wide, can be fas-
tened with a screw, can be labeled with KLM 1

gray E/MK 1 1421659 100

Screw-on end bracket,

for NS 35 DIN rail

– The E/AL-NS 35 provides optimum

support for large terminal blocks and
devices
– Large area for labeling

For NS 35 DIN rail For terminal blocks from 50 mm²

on NS 35 DIN rails
Technical data Technical data
Dimensions Width Length Height Width Length Height
[mm] 9.5 48.6 32.8 10 59 44
General data
Material PA Aluminum
Tightening torque [Nm] 0.4 - 0.5 0.4 - 0.5
Inflammability class according to UL 94 V2 -

Ordering data Ordering data

Pcs. / Pcs. /
Description Color Type Order No. Type Order No.
Pkt. Pkt.
End bracket, for screwing onto NS 35, can be equipped with termi-
nal strip marker KLM-A or ZB 8
gray E/NS 35 N 0800886 50
Aluminum end bracket, for screwing on, for end support
of 50 - 300 mm² terminal blocks, can be labeled with ZB 10,
for mounting on NS 35...
silver E/AL-NS 35 1201662 10

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 499

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Installation and mounting material - CABINET add-on
Component mounting
Marking for terminal strips

– The KLM has been specially developed for

the CLIPFIX end brackets
– The precise engagement mechanism
allows infinite adjustment of the labeling
area height
– The KLM 3-L is suitable for multi-level
terminal blocks and can be cut at two
defined points

For CLIPFIX end brackets, For CLIPFIX end brackets,

can be labeled with snap-on label can be labeled with label
Technical data Technical data
Dimensions Width Length Height Width Length Height
[mm] 12.5 22 42 10 22 27
General data
Material PA PA
Inflammability class according to UL 94 V2 V2
Temperature range [°C] -40 ... 100 -40 ... 100
Components Halogen-free Halogen-free

Ordering data Ordering data

Pcs. / Pcs. /
Description Color Type Order No. Type Order No.
Pkt. Pkt.
Terminal strip marker, adjustable height,
for CLIPFIX ... end bracket, can be labeled with SS-ZB
Lettering field size: 20 x 8 mm gray KLM 2 0807575 100
Terminal strip marker, adjustable height,
for CLIPFIX ... end bracket, can be labeled with EML (20x8) label
or with B-STIFT or X-PEN
gray KLM 3 0811969 100
Can be cut to length gray KLM 3-L 0814788 100

Marking for terminal strips

For E/MK and E/MBK end brackets For E/UK and CLIPFIX 35 end brackets

Technical data Technical data

General data
Material ABS ABS
Inflammability class according to UL 94 HB HB
Temperature range [°C] -40 ... 80 -40 ... 80
Components free from silicone and halogen free from silicone and halogen

Ordering data Ordering data

Pcs. / Pcs. /
Description Color Type Order No. Type Order No.
Pkt. Pkt.
Terminal strip markers, for E/MK, E/MK 1, and
E/MBK end bracket, lettering field: 24 x 4 mm
transparent KLM 1 1004319 100
Terminal strip markers, for E/UK or CLIPFIX 35 end brackets,
lettering field: 25 x 6 mm
transparent KLM 1004306 100

Accessories Accessories
Insert strips for thermal transfer printers,
5000 labels p. roll
Lettering field size: 24 x 4 mm, 5000 labels per roll white EMT (24X4)R 0816265 1
Lettering field size: 25 x 6 mm, 5000 labels per roll white EMT (25X6)R 0817264 1

500 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Installation and mounting material - CABINET add-on
Component mounting
Marking for terminal strips

Notes:
1) Please specify the required marking with order.

For E/UK, E/NS 35 N, For end bracket and DIN rail mounting
and CLIPFIX 35 end brackets

Technical data Technical data

General data
Material ABS PA
Inflammability class according to UL 94 HB V2
Temperature range [°C] -40 ... 80 -40 ... 100
Components free from silicone and halogen free from silicone and halogen

Ordering data Ordering data

Pcs. / Pcs. /
Description Color Type Order No. Type Order No.
Pkt. Pkt.
Terminal strip markers, for strip marking, adjustable height,
for use with E/UK, E/NS 35 N or CLIPFIX 35 end brackets,
lettering field: 44 x 7 mm

transparent KLM-A 1004348 100

Terminal strip marker carriers, for marking terminal groups,
for E/UK end bracket, lettering field: 40 x 17 mm
Hood material: PE

gray UBE 0800310 10

Terminal strip marker carrier, for marking terminal block groups,
for assembly on NS 32... or NS 35... DIN rail,
lettering field size: 40 x 17 mm
Hood material: PE
gray UBE/D 0800307 10

Accessories Accessories
Insert strip for thermal transfer printer,
for UBE/D or UBE terminal strip marker
Lettering field size: 40 x 17 mm, 2300 labels p. roll white EMT (40X17)R 0817293 1

Insert strip for laser printer, perforated,

for KLM-A terminal strip marker
Lettering field size: 44 x 7 mm white ESL 44X 7 0808244 10
Lettering field size: 40 x 17 mm, white ESL 40X17 0808095 10
1 sheet = 56 labels
Special printing insert strips,
marking according to customer requirements1)

Lettering field size: 44 x 7 mm white ESL 44X 7 CUS 0824404 1

Lettering field size: 40 x 17 mm, white ESL 40X17 CUS 0824403 1
1 sheet = 56 labels

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 501

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Installation and mounting material - CABINET add-on
Component mounting
Angled brackets for fixing DIN rails

– The BG/S brackets can be used to fix

DIN rails at a distance from the
mounting surface
– 30° tilt angle

Angled bracket, low Angled bracket, high

Technical data Technical data

Dimensions Width Length Height Width Length Height
[mm] 19.7 87 35.4 20 84 46
General data
Material Steel Steel

Ordering data Ordering data

Pcs. / Pcs. /
Description Color Type Order No. Type Order No.
Pkt. Pkt.
Angled bracket, for fixing DIN rails at an angle of 30°,
with M6 screw, galvanized and thick layer passivated

silver BG/S 1201086 10 BG/SH 1201099 10

Angled brackets, with DIN rail limit stop, for fixing DIN rails at an
angle of 30°, with M6 screw, galvanized and thick layer passivated

silver BG/SA 1201604 10 BG/SHA 1201594 10

Flat brackets for fixing DIN rails

– The BG/F brackets can be used to fix

DIN rails at a distance from the
mounting surface

Flat brackets with lugs Flat brackets without lugs

Technical data Technical data

Dimensions Width Length Height Width Length Height
[mm] 20 84 12 20 37 15
General data
Material Steel Steel

Ordering data Ordering data

Pcs. / Pcs. /
Description Color Type Order No. Type Order No.
Pkt. Pkt.
Flat bracket, for fixing DIN rails 12 mm above the base,
with M6 screw, galvanized and thick layer passivated

silver BG/F 1201060 10

Flat bracket, is screwed with DIN rails 15 mm above the base,
fixing hole: 6.5 mm Ø, galvanized and thick layer passivated

silver BG/F 1 1201112 10

502 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Installation and mounting material - CABINET add-on
Component mounting
Universal adapter

– The universal adapters are used to secure

and hold electrical or electronic
switching devices
– They allow fully insulated mounting of
components or DIN rails

For NS 35 and NS 32 DIN rails

Technical data
Dimensions Width Length Height
[mm] 10 42.6 19
General data
Material PA
Inflammability class according to UL 94 V2

Ordering data

Pcs. /
Description Color Type Order No.
Pkt.
Universal rail adapter, for NS 35... or NS 32... DIN rail,
for accommodation of switching devices, 10 mm wide

For M3 screws gray USA 10 1201578 10

For M5 screws gray USA 10/4,6 1202713 10

Mounting accessories

– The support can be used for totally

insulated DIN rail support
– The NS 35/... CAP end caps can be
attached to the ends of NS 35/7,5 and
NS 35/15 DIN rails

Support, insulated Protective caps for DIN rails

Technical data Technical data

Dimensions Width Length Height Width Length Height
[mm] 38 35 21 7 37.5 9
General data
Material PA PP
Inflammability class according to UL 94 V2 HB

Ordering data Ordering data

Pcs. / Pcs. /
Description Color Type Order No. Type Order No.
Pkt. Pkt.
Support, for fixing DIN rails 21 mm above the mounting surface,
with M6 screw, countersunk fixing hole 6.1 mm Ø,
can also be used for protective insulation of terminal strips

gray AB/NS 1201141 10

DIN rail end piece
for DIN rail NS35/7.5 gray NS 35/ 7,5 CAP 1206560 100
for DIN rail NS35/15 gray NS 35/15 CAP 1206573 100

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 503

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Installation and mounting material - CABINET add-on
Component mounting
Cover profiles

Cover profile and hood, sealable

Technical data
General data
Material PVC
Temperature range [°C] -15 ... 65

Ordering data

Pcs. /
– Cover profiles provide protection against un- Description Color Type Order No.
Pkt.
authorized use of terminal strips
Cover profile, supply length 1 m
– This profile has been specially adapted to the
transparent AP-ME METER 3034361 10
contour of the measuring transducer discon- Cover profile, please specify the desired length in cm
nect terminal blocks
– The cover can be securely snapped onto the transparent AP-ME CM 3034345 1
corresponding APH-ME end brackets and Covering hood, for the contact and dust-protected encapsulation
sealed as an option of the components
transparent AH-ME 3240265 5
– The AH-ME cover, which is enclosed on all
sides, is snapped onto the end brackets and
can be optionally sealed

Holder for AP-ME cover profiles

– The APH-ME end bracket is used in con-

junction with the AP-ME cover
– It provides facilities for retaining FBS  ...-8
plug-in bridges and is optionally sealable
– The APT-ME holder serves as a partition
plate or intermediate support in the case
of long terminal strips

Cover profile end bracket, sealable Cover profile holder

Technical data Technical data

General data
Material PA PA
Inflammability class according to UL 94 V2 V2
Temperature range [°C] -40 ... 115 -40 ... 115

Ordering data Ordering data

Pcs. / Pcs. /
Description Color Type Order No. Type Order No.
Pkt. Pkt.
End bracket, for AP-ME cover profile, sealable,
with storage option for plug-in bridges

gray APH-ME 3034374 10

Holder, for AP-ME cover profile
gray APT-ME 3034358 10

504 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Installation and mounting material - CABINET add-on
Component mounting
Cover profiles

– Cover profiles provide protection against

unauthorized use of terminal strips
– Large-area labeling possible with AP-ES
insert strips
Notes:
1) When ordering please specify the desired length in cm.

Accuracy 1 mm.

Cover profile for mounting on a DIN rail Cover profile for mounting on an end bracket

Technical data Technical data

General data
Material PVC Polycarbonate PC
Inflammability class according to UL 94 V2 V2
Temperature range [°C] -15 ... 65 -40 ... 115

Ordering data Ordering data

Pcs. / Pcs. /
Description Color Type Order No. Type Order No.
Pkt. Pkt.
Cover profile, for terminal strips, can be labeled with AP-ES insert
strips, cover profile carriers should be placed at the ends and at
intervals of approx. 40 cm, maximum supply length: 1 m1)

Can be snapped onto AP 2-TU cover profile carrier transparent AP 2 CM 5022889 1

Can be snapped onto AP 3-TU or AP 3-TNS 35 transparent AP 3 CM 5022876 1

Cover profile carrier, for mounting on NS 32 or NS 35/7,5 DIN rail,

for fixing the AP cover profile, 2 mm thick, material: PA

gray AP 2-TU 5022630 50

gray AP 3-TU 5022656 50
Sealable cover profile, for mounting on NS 35 DIN rail, for fixing
the AP 3 cover profile, with plastic M5 knurled nut,
space requirement: 13 mm

gray AP 3-TNS 35 5022672 10

U-shaped cover, inner dimensions: 100 x 38 mm, 2 mm thick,
maximum supply length: 2.05 m, also required: 2 E/UK end brack-
ets and 2 VAH cover holders,
made acc. to length specifications1)

transparent A/U CM 5021110 1

Adjustable cover holder, for mounting covers (up to 3 mm thick),
additional requirements: one E/UK or CLIPFIX 35 end bracket,
material PA

gray VAH 1201468 10

Accessories Accessories
Insert strips, for group marking, for sliding into the AP 2 and AP 3
cover profile, cardboard, lettering field: 35 x 500 mm

white AP-ES 5022685 10

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 505

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Installation and mounting material - CABINET add-on
Component mounting
Cover profiles for UK terminal blocks

Single cover for UK terminal blocks

Technical data
General data
Material ABS
– Covering of live parts Inflammability class according to UL 94 HB
– Protection against accidental actuation of Temperature range [°C] -40 ... 80
Components free from silicone and halogen
terminal points or disconnect terminal
blocks Ordering data
– Protection against environmental Description Color Type Order No.
Pcs. /
influences Pkt.

– Can be labeled Single cover, for covering the UK 2,5 neutral terminal block, snap
fit
transparent EA 4 0805360 50
Single cover, for covering the UK 3 N, UK 5 N, UK 6 N, UK 4-FSR,
UK 4FS/FS,UK 4-LOER terminal blocks, snap fit

transparent EA 5 1024014 100

Single cover, for covering the UK 16 neutral terminal block, snap
fit
transparent EA 7 1024250 100
Single cover, for covering the UK 3 N, UK 5 N, UK 6 N, UK 4-FSR,
UK 4FS/FS,UK 4-LOER terminal blocks, snap fit,
black print: lightning flash

yellow EA 5-WS 1024085 100

Single cover, for covering the UK 35, UIK 35 terminal block,
cannot be labeled, snap fit
transparent EA 11 1024263 50

506 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Installation and mounting material - CABINET add-on
Component mounting
Cover profiles

– Covering of live parts

– Protection against accidental actuation of
terminal points or disconnect terminal
blocks
– Protection against environmental
influences
– Can be labeled

Cover profile, hinged for DIN rail mounting

Technical data
General data
Material Polycarbonate PC
Inflammability class according to UL 94 V2
Temperature range [°C] -40 ... 115
Components free from silicone and halogen

Ordering data

Pcs. /
Description Color Type Order No.
Pkt.
Holding profile, is snapped into the APK-TU cover holder,
with groove for zack marker strip ZB 5 up to ZB 10, length: 2 m

transparent APK 1 5022795 10

Holding profile, is snapped into the APK-TU cover holder,
with groove for zack marker strip ZB 5 up to ZB 10, length: 2 m

gray APK-HP 2 METER 5022818 2

Cover profile holder, 10 mm width, for mounting on NS 32 or NS
35/7,5, for fixing the holding profile APK-HP,
can be labeled with ZB 10 zack marker strip, material: PA

gray APK-TU 5022805 10

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 507

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Installation and mounting material - CABINET add-on
Busbars
Neutral busbar

3 x 10 mm 6 x 6 mm

Technical data Technical data

Dimensions Width Length Height Width Length Height
[mm] 10 1000 3 6 1000 6
General data
Material Copper Copper

Ordering data Ordering data

Pcs. / Pcs. /
Description Color Type Order No. Type Order No.
Pkt. Pkt.
PEN conductor busbar, 3 x 10 mm, 1 m long, material: copper,
tin-plated, nominal current: 140 A

silver NLS-CU 3/10 SN 1000MM 0402174 10

PEN conductor busbar, in accordance with
DIN VDE 0611-4, 6 x 6 mm, 1 m long, material: copper, tin-plated,
nominal current: 140 A

silver NLS-CU 6/ 6 SN 1000MM 0402161 10

Supports for neutral busbars

There is a choice of three support frames

available as support for busbars:
– The AB/SS for one rail
– The AB 2/SS for offset arrangement of
neutral and (PE) busbars
– The lower ABN 2/SS
Notes:
For dimensional drawings, see www.phoenixcontact.net/products.

Support frame for SK shield Support, multi-level, insulated

connection terminal blocks
Technical data Technical data
Dimensions Width Length Height Width Length Height
[mm] 19.4 23.4 21.7 19 42 48
General data
Material PA PA
Inflammability class according to UL 94 V2 V2

Ordering data Ordering data

Pcs. / Pcs. /
Description Color Type Order No. Type Order No.
Pkt. Pkt.
Support, insulated, with retaining screw,
for 3 x 10 mm or 6 x 6 mm busbars
gray AB/SS 0404428 10
Double support, insulating material,
optionally for use with 3 x 10 mm or 6 x 6 mm neutral busbar,
height: 48 mm
Height 48 mm gray AB2/SS 0404431 10
Height 36.8 mm gray ABN 2/SS 0404460 10
Triple support frame, made from insulating material
gray AB3/SS 0800086 10

508 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Installation and mounting material - CABINET add-on
Busbars
Power terminal blocks

10 (16) mm², 76 A, power terminal block 35 (35) mm², 125 A, power terminal block

Technical data Technical data

Dimensions Width Length Height Width Length Height
[mm] 8 40 36 12 40 37
Max. electrical data Imax. [A]     max. Ø [mm2] AWG Imax. [A]     max. Ø [mm2] AWG
76 0.5 - 16 20 - 6 125 0.75 - 35 18 - 2
Rated data IEC UL/CUL CSA IEC/ IEC UL/CUL CSA IEC/
EN 60079-7 EN 60079-7
Nominal current / cross section [A] / [mm²] 57 / 10 -/- - - 125 / 35 -/- - -
Connection capacity solid stranded Ferrule solid stranded Ferrule
    Without / with plastic sleeve     Without / with plastic sleeve
1 conductor [mm2] 0.5 - 16 0.5 - 10 0.5 - 16 0.5 - 10 0.75 - 35 0.75 - 35 0.75 - 35 0.75 - 35
Two conductors (of the same type) [mm2] 0.5 - 10 0.5 - 10 0.5 - 10 - 0.75 - 10 0.75 - 10 0.75 - 10 -
General data
Stripping length [mm] 14 14
Screw thread M5 M6
Tightening torque [Nm] 2.5 - 3 3.2 - 3.7

Ordering data Ordering data

Pcs. / Pcs. /
Description   Color Type Imax Order No. Type Imax Order No.
Pkt. Pkt.
Power terminal block, copper, nickel-plated aluminum EK 116 0401010 10 EK 135 0401023 10

Branch terminal blocks

35 (35) mm², 125 A, branch terminal

Technical data
Dimensions Width Length Height
[mm] 12 40 36
Max. electrical data Imax. [A]     max. Ø [mm2] AWG
125 0.75 - 35 18 - 2
Rated data IEC UL/CUL CSA IEC/
EN 60079-7
– A branch of flat copper busbars often has Nominal current / cross section [A] / [mm²] 125 / 35 -/- - -
Connection capacity solid stranded Ferrule
to be produced in switch systems     Without / with plastic sleeve
– This can be done easily with the branch 1 conductor [mm2] 0.75 - 35 0.75 - 35 0.75 - 35 0.75 - 35
Two conductors (of the same type) [mm2] 0.75 - 10 0.75 - 10 0.75 - 10 -
terminal block because the terminal block General data
can be attached and firmly clamped any- Stripping length [mm] 15
where on a copper rail (up to max. 5 mm Screw thread M6
Tightening torque [Nm] 3.2 - 3.7
thick) later on
Ordering data

Pcs. /
Description   Color Type Imax Order No.
Pkt.
Branch terminal block, for connection to copper aluminum AZK 35 0702997 10
bars up to 5 mm thick

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 509

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Installation and mounting material - CABINET add-on
Busbars
L/N/PE connection terminal blocks

4 (6) mm², 41 A, connection terminal blocks



Technical data
Dimensions Width Length Height
[mm] 7 23.7 23.6
– In electrical systems subject to the setup Max. electrical data Imax. [A]     max. Ø [mm2] AWG
requirements of DIN VDE 0100 or 41 0.5 - 6 20 - 10
 
IEC 60204-1/EN 60204-1/VDE 0113-1, Rated data IEC UL/CUL CSA IEC/
N, PE or phase conductor L are often EN 60079-7
Rated voltage [V] - 300 - -
connected to central busbars. This re- Nominal current / cross section [A] / [mm²] 41 / 4 20 / - - -
quires the conductor and/or terminal Rated cross section [mm2] 4 - - -
block to be clearly labeled for the corre- Cross section range AWG 20 - 10 22-12 - -
Connection capacity solid stranded Ferrule
sponding circuit.     Without / with plastic sleeve
The connection terminal blocks satisfy 1 conductor [mm2] 0.5 - 6 0.5 - 4 0.5 - 6 0.5 - 6
Two conductors (of the same type) [mm2] 0.5 - 2.5 0.5 - 2.5 0.5 - 2.5 -
these requirements in several ways: Two stranded conductors with a TWIN ferrule [mm2] 0.5 - 2.5
– Through individual labeling of each General data
terminal block Stripping length [mm] 16
Screw thread M4
– By their blue, green-yellow or Tightening torque [Nm] 1.5 - 1.8
black colored housings Insulating material PA
– Large labeling possible with ZB, UC-TM, Inflammability class according to UL 94 V2

UCT-TM Ordering data

Pcs. /
Description   Color Type Imax Order No.
Pkt.
Connection terminal block, steel, pushed onto black AKG 4 BK 0421032 50
NLS neutral busbar, can be labeled with ZB ...

Up to 6 mm² solid, 7 mm wide green-yellow AKG 4 GNYE 0421029 50

Up to 6 mm² solid, 7 mm wide blue AKG 4 BU 0421016 50
Without insulating cap silver AK 4 0404017 50
Connection terminal block, steel, pushed onto black
NLS neutral busbar, can be labeled with ZB ...

Up to 16 mm2 solid, 10 mm wide green-yellow

Up to 16 mm2 solid, 10 mm wide blue
Without insulating cap silver
Connection terminal block, steel, pushed onto black
NLS neutral busbar, can be labeled with ZB ...

Up to 35 mm2 solid, 14.3 mm wide green-yellow

Up to 35 mm2 solid, 14.3 mm wide blue
Without insulating cap silver

19,4 7 10 14,3

Ø8,5
55
44,5
35,5

Ø4,5
23,4
27,5

16
29,5

510 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Installation and mounting material - CABINET add-on
Busbars

16 (16) mm², 76 A, connection terminal blocks 35 (35) mm², 125 A,

connection terminal blocks

 

Technical data Technical data

Width Length Height Width Length Height
9.8 23.7 29 14.3 27 39
Imax. [A]     max. Ø [mm2] AWG Imax. [A]     max. Ø [mm2] AWG
76 1.5 - 16 16 - 6 125 2.5 - 35 14 - 2
  IEC / EN  
IEC UL/CUL CSA IEC/ IEC UL/CUL CSA IEC/
EN 60079-7 EN 60079-7
- 300 - - - 300 - -
76 / 16 50 / - 65 / - - 125 / 35 115 / - 135 / - -
16 - - - 35 - - -
16 - 6 18-6 18-6 - 14 - 2 18-2 18-2 -
solid stranded Ferrule solid stranded Ferrule
    Without / with plastic sleeve     Without / with plastic sleeve
1.5 - 16 1.5 - 16 1.5 - 16 1.5 - 16 2.5 - 35 2.5 - 35 2.5 - 35 2.5 - 35
1.5 - 6 1.5 - 6 1.5 - 6 - 1.5 - 16 1.5 - 16 1.5 - 16 -
1.5 - 10 1.5 - 10

16 16
M5 M6
2.5 - 3 3.2 - 3.7
PA PA
V2 V2

Ordering data Ordering data

Pcs. / Pcs. /
Type Imax Order No. Type Imax Order No.
Pkt. Pkt.

AKG 16 BK 0423030 50

AKG 16 GNYE 0423027 50

AKG 16 BU 0423014 50
AK 16 0404033 50
AKG 35 BK 0424039 50

AKG 35 GNYE 0424026 50

AKG 35 BU 0424013 50
AK 35 0404046 50

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 511

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Installation and mounting material - CABINET add-on
Connection terminal blocks and sockets
Europe connectors Notes:
For more variants, see www.phoenixcontact.net/products.

2.5 (2.5) mm², 24 A, 12-pos.



Technical data
Dimensions Width Length Height
[mm] 16.2 93.6 13.4
– The Europe connectors for conductors Max. electrical data Imax. [A]   Umax. [V]   max. Ø [mm2] AWG
with a cross section of up to 16 mm2 24 450 0.5 - 2.5 20 - 14
 
feature wire protection Rated data IEC UL/CUL CSA IEC/
– Particularly suitable for finely stranded EN 60079-7
Rated voltage [V] 450 300 - -
conductors, including those without Nominal current / cross section [A] / [mm²] 24 / 2.5 20 / - - -
ferrules Rated cross section [mm2] 2.5 - - -
– Insulating housing made from Cross section range AWG 20 - 14 22-12 - -
Connection capacity solid stranded Ferrule
halogen-free polyamide     Without / with plastic sleeve
– High-quality metal parts with 1 conductor [mm2] 0.5 - 2.5 0.5 - 2.5 0.5 - 1.5 0.5 - 1
Two conductors (of the same type) [mm2] 0.5 - 0.75 0.5 - 0.75 - -
corrosion-resistant surfaces Two stranded conductors with a TWIN ferrule [mm2] 0.5
– Secure fixing in housing General data
Stripping length [mm] 5
Screw thread M2,6
Tightening torque [Nm] 0.4 - 0.5
Insulating material PA
Inflammability class according to UL 94 V2

Ordering data

Pcs. /
Description   Color Type   Order No.
Pkt.
Europe connector, 12-pos., with wire protection transparent EC 2,5 P TR 3240167 10

512 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Installation and mounting material - CABINET add-on
Connection terminal blocks and sockets

4 (4) mm², 32 A, 12-pos. 6 (6) mm², 41 A, 12-pos. 16 (16) mm², 76 A, 12-pos.

  

Technical data Technical data Technical data

Width Length Height Width Length Height Width Length Height
18.6 117 15 22.2 132.7 17.3 25.2 173.9 20.8
Imax. [A]   Umax. [V]   max. Ø [mm2] AWG Imax. [A]   Umax. [V]   max. Ø [mm2] AWG Imax. [A]   Umax. [V]   max. Ø [mm2] AWG
32 450 0.75 - 4 18 - 12 41 450 1-6 16 - 10 76 450 6 - 16 10 - 6
     
IEC UL/CUL CSA IEC/ IEC UL/CUL CSA IEC/ IEC UL/CUL CSA IEC/
EN 60079-7 EN 60079-7 EN 60079-7
450 300 - - 450 300 - - 450 300 - -
32 / 4 30 / - - - 41 / 6 50 / - - - 76 / 16 55 / - - -
4 - - - 6 - - - 16 - - -
18 - 12 20-10 - - 16 - 10 14-8 - - 10 - 6 10-6 - -
solid stranded Ferrule solid stranded Ferrule solid stranded Ferrule
    Without / with plastic sleeve     Without / with plastic sleeve     Without / with plastic sleeve
0.75 - 4 0.75 - 4 0.5 - 2.5 0.5 - 2.5 1-6 1-6 0.75 - 4 0.75 - 4 6 - 16 6 - 16 1.5 - 10 1.5 - 10
0.75 - 1.5 0.75 - 1 0.5 - 1 - 0.75 - 2.5 0.75 - 1.5 0.75 - 1.5 - 1.5 - 4 2.5 - 4 1.5 - 2.5 -
0.5 - 1 0.5 - 1 0.75 - 2.5

6 7 8
M3 M3,5 M4
0.5 - 0.6 0.8 - 1 1.2 - 1.5
PA PA PA
V2 V2 V2

Ordering data Ordering data Ordering data

Pcs. / Pcs. / Pcs. /

Type   Order No. Type   Order No. Type   Order No.
Pkt. Pkt. Pkt.
EC 4 P TR 3240171 10 EC 6 P TR 3240175 10 EC 16 P TR 3240182 10

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 513

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Installation and mounting material - CABINET add-on
Connection terminal blocks and sockets
Europe connectors

– These Europe connectors are suitable for

solid and stranded conductors with a max.
cross section of 25 mm2
– The prismatic clamping part facilitates con-
ductor entry and secure contact can be
established even in the case of conductors
without ferrules
– The polypropylene insulating housing allows
individual positions to be disconnected
simply by twisting and without the need for
tools 4 (4) mm², 32 A, 12-pos. 6 (6) mm², 41 A, 12-pos.
– The high-quality metal parts, which feature
corrosion-resistant surfaces, are fixed
securely in the housing
 

Technical data Technical data

Dimensions Width Length Height Width Length Height
[mm] 16.6 94.9 13 18.9 116.5 14.9
Max. electrical data Imax. [A]   Umax. [V]   max. Ø [mm2] AWG Imax. [A]   Umax. [V]   max. Ø [mm2] AWG
32 450 0.5 - 4 20 - 12 41 450 0.75 - 6 18 - 10
   
Rated data IEC UL/CUL CSA IEC/ IEC UL/CUL CSA IEC/
EN 60079-7 EN 60079-7
Rated voltage [V] 450 - - - 450 - - -
Nominal current / cross section [A] / [mm²] 32 / 4 -/- - - 41 / 6 -/- - -
Rated cross section [mm2] 4 - - - 6 - - -
Cross section range AWG 20 - 12 - - - 18 - 10 - - -
Connection capacity solid stranded Ferrule solid stranded Ferrule
    Without / with plastic sleeve     Without / with plastic sleeve
1 conductor [mm2] 0.5 - 4 0.5 - 4 0.75 - 2.5 0.75 - 2.5 0.75 - 6 0.75 - 6 0.75 - 4 0.75 - 2.5
Two conductors (of the same type) [mm2] 0.5 - 1 -1 - - 0.75 - 1.5 0.75 - 1.5 0.5 - 1 -
Two stranded conductors with a TWIN ferrule [mm2] 0.5 0.5 - 1
General data
Stripping length [mm] 5 6
Screw thread M2,6 M3
Tightening torque [Nm] 0.4 - 0.5 0.5 - 0.6
Insulating material PP PP

Ordering data Ordering data

Pcs. / Pcs. /
Description   Color Type   Order No. Type   Order No.
Pkt. Pkt.
Europe connector, 12-pos. white EC 4 3240168 10 EC 6 3240172 10
black EC 4 BK 3240169 10 EC 6 BK 3240173 10

514 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Installation and mounting material - CABINET add-on
Connection terminal blocks and sockets

10 (10) mm², 57 A, 12-pos. 16 (16) mm², 76 A, 12-pos. 25 (25) mm², 101 A, 12-pos.

  

Technical data Technical data Technical data

Width Length Height Width Length Height Width Length Height
17.3 133.8 23.4 20.7 174.5 25 30 187.3 28
Imax. [A]   Umax. [V]   max. Ø [mm2] AWG Imax. [A]   Umax. [V]   max. Ø [mm2] AWG Imax. [A]   Umax. [V]   max. Ø [mm2] AWG
57 450 1 - 10 16 - 8 76 450 1.5 - 16 14 - 6 101 750 10 - 25 8-4
     
IEC UL/CUL CSA IEC/ IEC UL/CUL CSA IEC/ IEC UL/CUL CSA IEC/
EN 60079-7 EN 60079-7 EN 60079-7
450 - - - 450 - - - 750 - - -
57 / 10 -/- - - 76 / 16 -/- - - 101 / 25 -/- - -
10 - - - 16 - - - 25 - - -
16 - 8 - - - 14 - 6 - - - 8-4 - - -
solid stranded Ferrule solid stranded Ferrule solid stranded Ferrule
    Without / with plastic sleeve     Without / with plastic sleeve     Without / with plastic sleeve
1 - 10 1 - 10 1.5 - 6 1.5 - 4 1.5 - 16 2.5 - 16 2.5 - 10 2.5 - 10 10 - 25 10 - 25 4 - 16 4 - 10
1 - 2.5 1.5 - 2.5 0.75 - 1.5 - 2.5 - 4 2.5 - 4 1.5 - 2.5 - 4-6 4-6 2.5 - 4 -
0.5 - 1.5 1-4 1.5 - 6

7 8 9
M3,5 M4 M5
0.8 - 1 1.2 - 1.5 2-3
PP PP PP

Ordering data Ordering data Ordering data

Pcs. / Pcs. / Pcs. /

Type   Order No. Type   Order No. Type   Order No.
Pkt. Pkt. Pkt.
EC 10 3240176 10 EC 16 3240179 10 EC 25 3240183 10
EC 10 BK 3240177 10 EC 16 BK 3240180 10 EC 25 BK 3240184 10

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 515

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Installation and mounting material - CABINET add-on
Connection terminal blocks and sockets
Junction box connectors

2.5 (2.5) mm², 24 A, 3-pos.



Technical data
Dimensions Width Length Height
[mm] 17.2 15.6 8.9
– Thanks to their push-in connection meth- Max. electrical data Imax. [A]   Umax. [V]   max. Ø [mm2] AWG
od, the three junction box connectors 24 450 0.5 - 2.5 20 - 14
 
available from Phoenix Contact enable Rated data IEC UL/CUL CSA IEC/
wiring to be installed under the tightest of EN 60079-7
Rated voltage [V] 450 600 - -
conditions without the need for tools Nominal current / cross section [A] / [mm²] 24 / 2.5 20 / - - -
– Solid single-strand conductors with a Rated cross section [mm2] 2.5 - - -
cross section range of 0.5 mm2 to Cross section range AWG 20 - 14 20-16 - -
Connection capacity solid stranded Ferrule
2.5 mm2 can be connected     Without / with plastic sleeve
– Solid multi-strand conductors (7 litz 1 conductor [mm2] 0.5 - 2.5 1.5 - 2.5 - -
General data
wires) with a cross section range of Stripping length [mm] 8
1.5 mm2 to 2.5 mm2 can be safely Insulating material PC/PA
connected Inflammability class according to UL 94 V2

– Different cross sections can be wired Ordering data

together in a junction box connector
Pcs. /
– The transparent housing makes it easier Description   Color Type   Order No.
Pkt.
to carry out a visual inspection of the Plug-in terminal block, 3-pos. transparent JBC 2,5/3 3240164 100
terminal points, thereby increasing the 5-pos. transparent
8-pos. transparent
safety of the wiring
– Integrated test openings enable the use of
test devices once wiring has been
completed

516 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Installation and mounting material - CABINET add-on
Connection terminal blocks and sockets

2.5 (2.5) mm², 24 A, 5-pos. 2.5 (2.5) mm², 24 A, 8-pos.

 

Technical data Technical data

Width Length Height Width Length Height
26 15.6 8.9 39.2 15.6 8.9
Imax. [A]   Umax. [V]   max. Ø [mm2] AWG Imax. [A]   Umax. [V]   max. Ø [mm2] AWG
24 450 0.5 - 2.5 20 - 14 24 450 0.5 - 2.5 20 - 14
   
IEC UL/CUL CSA IEC/ IEC UL/CUL CSA IEC/
EN 60079-7 EN 60079-7
450 600 - - 450 600 - -
24 / 2.5 20 / - - - 24 / 2.5 20 / - - -
2.5 - - - 2.5 - - -
20 - 14 20-16 - - 20 - 14 20-16 - -
solid stranded Ferrule solid stranded Ferrule
    Without / with plastic sleeve     Without / with plastic sleeve
0.5 - 2.5 1.5 - 2.5 - - 0.5 - 2.5 1.5 - 2.5 - -

8 8
PC/PA PC/PA
V2 V2

Ordering data Ordering data

Pcs. / Pcs. /
Type   Order No. Type   Order No.
Pkt. Pkt.

JBC 2,5/5 3240165 100

JBC 2,5/8 3240166 50

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 517

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Installation and mounting material - CABINET add-on
Connection terminal blocks and sockets
Sockets with 45 mm standard pitch Notes:
Type of housing: D W
SD-... polyamide non-reinforced PA
EMG...-SD: polycarbonate fiber reinforced PCF H
EM-DUO... PVC 94 V0
Socket insert Aminoplast type 131
For approvals and dimensional drawing,
visit www.phoenixcontact.net/products.

Germany



It is equally important in modern switch-

gears as in simple distributions: the rail- L1

mountable socket in standard format. PE

The socket is mounted in an exposed N
position to allow mounting tools, service
devices, and other electrical equipment to
be installed comfortably.
The mains connection terminal blocks Technical data
(L1, N, and PE) are arranged on one side of Nominal voltage 250 V AC
the socket for easy connection. All SD Max. continuous current 16 A AC
General data SD-D... and EMG 45... EMG 90...
sockets are supplied with equipment Dimensions W/H/D 45 mm / 75 mm / 65.2 mm 90 mm / 75 mm / 70.5 mm
marker tags. Additional equipment marker Connection data solid / stranded / AWG 0.2 - 4 mm² / 0.2 - 2.5 mm² / 24 - 12
tags are available for the EMG housings. Standards/regulations IP20
Contact material CuZn37
The 45 mm socket is available with or Ambient temperature range -20°C ... 60°C
without a miniature fuse. There is a 6.3 A Standards/regulations IEC 83 , DIN 49440-1
fine fuse (5 x 20 mm) for protection. Ordering data
System parts, in which items are still live
Pcs. /
even after the main switch has been turned Description Type Order No.
Pkt.
off, must be marked in accordance with Socket for the DIN rail
DIN VDE 0105-1 and IEC 60204-1/EN Screw connection, light indicator, green SD-D/SC/LA 2964898 5
60204-1/DIN VDE 0113-1 as well as the Screw connection, light indicator, gray SD-D/SC/LA/GY 2963491 5
Screw connection, light indicator, yellow SD-D/SC/LA/YE 2963404 5
Accident Prevention Regulation VBG 4. In Screw connection, green SD-D/SC 2963310 5
this case, a socket version in a yellow Screw connection, gray SD-D/SC/GY 2963815 5
Screw connection, yellow SD-D/SC/YE 2963459 5
housing is available. Spring-cage connection, light indicator, green SD-D/SP/LA 2963307 5
The sockets with a 45 mm standard pitch Spring-cage connection, light indicator, gray SD-D/SP/LA/GY 2963488 5
and with 90 mm double housings can be Spring-cage connection, light indicator, yellow SD-D/SP/LA/YE 2963475 5
Spring-cage connection, green SD-D/SP 2963323 5
quickly snapped onto the 35 mm DIN rail in Spring-cage connection, gray SD-D/SP/GY 2963501 5
accordance with EN 60715. Spring-cage connection, yellow SD-D/SP/YE 2963462 5
For the sockets, you can choose between Socket for the DIN rail with device fuse (5 x 20 mm, 6.3 A)

the following versions: Screw connection, light indicator, green EMG 45-SD-D/LA/SI 2943738 5
– Screw or spring-cage connection Screw connection, light indicator, yellow EMG 45-SD-D/LA/SI YE 2940825 5
Double socket for the DIN rail
– With or without light indicator Screw connection, light indicator, green EMG 90-2SD-D/LA 2941523 2
– Grounding connector, Belgian, French or Screw connection, gray
USA version Screw connection, residual current circuit breaker, gray

– Housing: green, yellow or light gray

Accessories
With the VS-SI-SD... socket inserts, Marker tags, 5-section, unprinted, labeling with X-PEN, M-PEN,
plotter or BKMT 20 x 8 label
the sockets can be integrated into the
IP65  VS-SI-EB-EMV-1 mounting frame, Lettering field size: 20 x 8 mm white SS-ZB WH 5031171 50
for example. For further information, Lettering field size: 20 x 8 mm yellow SS-ZB YE 5031650 50
visit www.phoenixcontact.net/products. labeled according to customer specifications white SS-ZB WH CUS 0824470 1

518 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Installation and mounting material - CABINET add-on
Connection terminal blocks and sockets

D W D W D W
H H H

France/Belgium USA USA

  

L1

PE

N
L1 L1

PE PE

N N

Technical data Technical data Technical data

250 V AC 125 V AC 120 V AC
10 A DC 15 A AC 15 A
SD-F... SD-US... EM-DUO... EM-DUO.../GFI
45 mm / 75 mm / 70.5 mm 45 mm / 75 mm / 70.5 mm 83 mm / 134 mm / 49 mm 83 mm / 134 mm / 52 mm
0.2 - 4 mm² / 0.2 - 2.5 mm² / 24 - 12 0.2 - 4 mm² / 0.2 - 2.5 mm² / 30 - 12 0.2 - 6 mm² / 0.2 - 4 mm² / 24 - 10
IP20 IP20 IP20
CuZn37 CuZn37 CuZn37
-20°C ... 60°C -20°C ... 60°C -40°C ... 70°C
IEC 83 , DIN 49440-1 IEC 83 , DIN 49440-1 UL 508

Ordering data Ordering data Ordering data

Pcs. / Pcs. / Pcs. /

Type Order No. Type Order No. Type Order No.
Pkt. Pkt. Pkt.

SD-F/SC/LA 2963336 5
SD-F/SC/LA/GY 2963844 5 SD-US/SC/LA/GY 2963860 10
SD-F/SC/LA/YE 2963909 5
SD-F/SC 2963352 5
SD-F/SC/GY 2963828 5

SD-F/SP/LA 2963349 5
SD-F/SP/LA/GY 2963857 5

EM-DUO 120/15 5600461 1

EM-DUO/120/15/GFI 5600462 1

Accessories Accessories Accessories

SS-ZB WH 5031171 50 SS-ZB WH 5031171 50

SS-ZB YE 5031650 50 SS-ZB YE 5031650 50
SS-ZB WH CUS 0824470 1 SS-ZB WH CUS 0824470 1

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 519

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Installation and mounting material - CABINET add-on
Shielding

Large shield support Easy to install Safe contact

Shield connection terminal blocks are The shield connection terminal blocks of- Phoenix Contact support frames for
suitable for all standard cable shields and al- fer optimum wiring convenience. Only once shield connection terminal blocks are easily
low for EMC-compliant wiring through the terminal strip has been wired is the snapped onto the mounting rail. The inte-
large surfaces and low-impendence and low- shield connection terminal block mounted grated contact metals allow the ground po-
resistance contact transitions. by simply pivoting it into place. tential to be automatically connected to the
busbar.

520 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Installation and mounting material - CABINET add-on
Shielding

Conductors with a diameter of 2 to The single-sided AB-SK shield support The double support frame offers simple
35 mm can make optimum contact with the frames are particularly well suited to space- handling with optimum EMC properties for
shield connection clamps of the SK series saving conductor connection for terminal the two-sided support of a shielded cable.
without any special tools and are available blocks and devices with cable entry at the Either an insulated or grounded structure
for various types of mounting. side. can be used.

The easiest way to wire terminal blocks The 3 x 10 mm PEN conductor busbar Having the same design as the SK series,
with a front connection is using AB-SK TOP can also be quickly and safely snapped into shield supports with SK ...-D terminal
support frames located above the blocks. the contact zone. The ground potential is blocks can also be realized directly on the
The NLS rail can be mounted in the support thereby automatically connected to the mounting plate or back wall. The terminal
frames vertically, horizontally or at a 45° an- busbar. blocks are simply pivoted into the two slots
gle for optimum conductor placing. above the conductor.

Support frames with a lateral metal insert Alternatively, the shielding can also be The easiest way to wire terminal blocks
for the PEN conductor busbar or T-shaped connected to ground potential insulated with a front connection is using support
AB-SK/E compact support frames are used from protective earth ground. An appropri- frames located above the blocks. This meth-
to freely position the shield connection ter- ate contact to the PEN conductor busbar is od also allows multi-level terminal blocks
minal blocks on the mounting plate. established using a pick-off terminal block. with short wiring paths to be connected in
compliance with EMC requirements.

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 521

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Installation and mounting material - CABINET add-on
Shielding
SK ... shield connection clamps

The screw-type shield connection clamps

of the SK series are characterized by:
– Simple handling
– Knurled screw
– Spring-loaded, large pressure piece
– Suitability for direct and busbar mounting
Notes:
For dimensional drawings, see page 531.

Shield connection clamps Shield connection clamps for direct mounting

for busbar mounting

Ordering data Ordering data

Pcs. / Pcs. /
Description Color Type Order No. Type Order No.
Pkt. Pkt.
Shield connection clamp, for applying the shield to busbars,
contact resistance < 1 mΩ
Ø 2 - 5 mm, tightening torque 0.4 Nm silver SK 5 3025338 10
Ø 3 - 8 mm, tightening torque 0.6 Nm silver SK 8 3025163 10
Ø 3 - 14 mm, tightening torque 0.8 Nm silver SK 14 3025176 10
Ø 5 - 20 mm, tightening torque 0.8 Nm silver SK 20 3025189 10
Ø 5 - 28 mm, tightening torque 1 Nm silver SK 28 3026997 10
Ø 20 - 35 mm, tightening torque 1.5 - 1.8 Nm silver SK 35 3026463 10
Shield connection clamp, for applying the shield directly to the
conductive mounting plates, plate thickness 1 - 2 mm

Ø 2 - 5 mm, tightening torque 0.4 Nm silver SK 5-D 3025406 10

Ø 3 - 8 mm, tightening torque 0.6 Nm silver SK 8-D 3026861 10
Ø 3 - 14 mm, tightening torque 0.8 Nm silver SK 14-D 3026874 10
Ø 5 - 20 mm, tightening torque 0.8 Nm silver SK 20-D 3026887 10
Ø 5 - 28 mm, tightening torque 1 Nm silver SK 28-D 3027006 10
Ø 20 - 35 mm, tightening torque 1.5 - 1.8 Nm silver SK 35-D 3026890 10

Accessories Accessories
PEN conductor busbar, 3 x 10 mm, 1 m long, material: copper,
tin-plated, nominal current: 140 A

NLS-CU 3/10 SN 1000MM 0402174 10

522 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Installation and mounting material - CABINET add-on
Shielding
SKS ... shield connection clamps

– The SKS ... spring shield connection

clamps are available for cable and conduc-
tor diameters of between 3 and 20 mm
– Three different forms of mounting are
possible: on NS 35 DIN rails, on busbars
or directly on conductive mounting plates
Notes:
For dimensional drawings, see page 531.

Shield connection clamps for busbar and Shield connection clamps

direct mounting for DIN rail mounting

 

Ordering data Ordering data

Pcs. / Pcs. /
Description Color Type Order No. Type Order No.
Pkt. Pkt.
Shield connection clamp, for applying the shield to busbars,
contact resistance < 1 mΩ
Ø 3 - 8 mm silver SKS 8 3240210 10
Ø 3 - 14 mm silver SKS 14 3240211 10
Ø 5 - 20 mm silver SKS 20 3240212 10
Shield connection clamp, for directly applying the shield to
conductive mounting plates, metal thickness 1-2 mm,
with fastening screw M4
Ø 3 - 8 mm silver SKS 8-D 3240213 10
Ø 3 - 14 mm silver SKS 14-D 3240214 10
Ø 5 - 20 mm silver SKS 20-D 3240215 10
Shield connection clamp, with screwfix,
mounting on DIN rail NS 35..., for shield support on busbars

Ø 3 - 8 mm silver SKS 8-NS35 3240216 10

Ø 3 - 14 mm silver SKS 14-NS35 3240217 10
Ø 5 - 20 mm silver SKS 20-NS35 3240218 10
Shield connection clamp, with snap-on foot,
mounting on DIN rail NS 35..., for shield support on busbars

Ø 3 - 8 mm silver SKS 8-SNS35 3062786 10

Ø 3 - 14 mm silver SKS 14-SNS35 3062799 10
Ø 5 - 20 mm silver SKS 20-SNS35 3062809 10

Accessories Accessories
PEN conductor busbar, 3 x 10 mm, 1 m long, material: copper,
tin-plated, nominal current: 140 A

NLS-CU 3/10 SN 1000MM 0402174 10 NLS-CU 3/10 SN 1000MM 0402174 10

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 523

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Installation and mounting material - CABINET add-on
Shielding
Support frame for shield support
on one side

Support frame, tall,

for SK & SKS shield connection clamps

Technical data
Dimensions Width Length Height
[mm] 5.2 102.4
AB-SK TOP General data
– For convenient shield connection, Material PA

especially for single- and multi-level Ordering data

terminal blocks and devices with a front Pcs. /
connection Description Color Type Order No.
Pkt.
– The 3 x 10 mm rail can be mounted in the Support frame with end holder function, for mounting on
support frames vertically, horizontally, NS 35..., direct contact with NS 35..., for accommodating
3 x 10 mm busbars, SK and SKS shield connection clamps
and at a 45° angle for optimum conductor
placing gray AB-SK TOP 3062090 10
– Compact design in a 5.2 mm pitch Support frame with end holder function, for mounting on
– Can be labeled with zack marker strip and NS 35..., insulated to NS 35..., for accommodating 3 x 10 mm bus-
bars, for SK and SKS shield connection clamps
KLM ... terminal strip marker;
see page 500 gray AB-SK TOP INSULATED 3062074 10
– Parking facility for FBS plug-in bridges Support frame, for mounting on NS 35..., direct contact with
– End holder function NS 35..., for accommodating 3 x 10 mm busbars, SK shield
connection clamps
– For mounting SK and SKS shield connec- gray
tion clamps Support frame, 65 mm, for mounting on NS 35..., direct contact
with NS 35..., for accommodating 3 x 10 mm busbars, SK shield
connection clamps
AB-SK
– The single-sided AB-SK shield support
gray
frames are particularly well suited to Support frame with end holder function, for mounting on
space-saving conductor connection for NS 35..., insulated to NS 35..., for accommodating 3 x 10 mm
busbars, for SK and SKS shield connection clamps
terminal blocks and devices with cable
entry at the side
gray
– Available in two lengths
– For mounting SK shield connection Accessories
clamps PEN conductor busbar, 3 x 10 mm, 1 m long, material: copper,
tin-plated, nominal current: 140 A
AB-SKS
silver NLS-CU 3/10 SN 1000MM 0402174 10
– For convenient shield connection,
Lateral groove labeling UC-TM 5, UCT-TM 5 or ZB 5
especially for single- and multi-level UC-TMF 5, UCT-TMF 5 or ZBF 5
terminal blocks and devices with a front
connection
– Insulated to DIN rail
– End holder function
– For mounting SK and SKS shield connec-
tion clamps
84,4
54,45
36,8

65 12,9
102,4

AB-SK TOP

524 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Installation and mounting material - CABINET add-on
Shielding

Support frame, Support frame, 65 mm long, Insulated support frame, tall, for
for SK shield connection clamps for SK shield connection clamps SK and SKS shield connection clamps

Technical data Technical data Technical data

Width Length Height Width Length Height Width Length Height
6.2 77.35 6.2 95.5 9.5 97.8

PA PA PA

Ordering data Ordering data Ordering data

Pcs. / Pcs. / Pcs. /

Type Order No. Type Order No. Type Order No.
Pkt. Pkt. Pkt.

AB-SK 3025341 10

AB-SK 65 3026489 10

AB-SKS 60 3240223 10

Accessories Accessories Accessories

NLS-CU 3/10 SN 1000MM 0402174 10 NLS-CU 3/10 SN 1000MM 0402174 10 NLS-CU 3/10 SN 1000MM 0402174 10
46,9
44
9,4

9,4
35,4

27
35,4

28,7
28,7

60
21,25 46,85 21,25 65
25 63,5
77,35 95,5
97,8
AB-SK AB-SK 65 AB-SKS 60

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 525

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Installation and mounting material - CABINET add-on
Shielding
Double support frame
for shield support on both sides

Double support frame, tall, for

SK and SKS shield connection clamps

Technical data
Dimensions Width Length Height
[mm] 5.2 155.8
AB-SK-D TOP General data
– For convenient shield connection, Material PA

especially for single- and multi-level Ordering data

terminal blocks and devices with a front Pcs. /
connection Description Color Type Order No.
Pkt.
– The 3 x 10 mm rail can be mounted in the Double support frame with end bracket function, for mounting
support frames vertically, horizontally, on NS 35..., direct contact with NS 35..., for accommodating
3 x 10 mm busbars, SK and SKS shield connection clamps
and at a 45° angle for optimum conductor
placing gray AB-SK-D TOP 3062100 10
– Compact design in a 5.2 mm pitch Double support frame with end bracket function, for mounting
– Can be labeled with zack marker strip and on NS 35..., insulated to NS 35..., for accommodating 3 x 10 mm
busbars, for SK and SKS shield connection clamps
KLM ... terminal strip marker;
see page 500 gray
– Parking facility for bridges and plugs Double support frame, for mounting on NS 35..., direct contact
– For mounting SK and SKS shield connec- with NS 35..., for accommodating 3 x 10 mm busbars, SK shield
connection clamps
tion clamps
AB-SK 65-D gray
Double support frame, 65 mm, for mounting on NS 35..., insu-
– The double shield support frames are lated to NS 35... for accommodating 3 x 10 mm busbars, SK shield
particularly well suited to space-saving connection clamps
conductor connections for terminal
blocks and devices with cable entry at the gray
side Accessories
– Available in two lengths PEN conductor busbar, 3 x 10 mm, 1 m long, material: copper,
– For mounting SK shield connection tin-plated, nominal current: 140 A

clamps silver NLS-CU 3/10 SN 1000MM 0402174 10

Lateral groove labeling UC-TM 5, UCT-TM 5 or ZB 5
UC-TMF 5, UCT-TMF 5 or ZBF 5
84,4
54,45
36,8

65 65 12,9
155,8

AB-SK-D TOP

526 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Installation and mounting material - CABINET add-on
Shielding

Insulated, double support frame, tall, for SK Double support frame, tall, Insulated, double support frame, tall,
and SKS shield connection clamps for SK shield connection clamps for SK shield connection clamps

Technical data Technical data Technical data

Width Length Height Width Length Height Width Length Height
5.2 155.8 8.2 150 8.2 150

PA PA PA

Ordering data Ordering data Ordering data

Pcs. / Pcs. / Pcs. /

Type Order No. Type Order No. Type Order No.
Pkt. Pkt. Pkt.

AB-SK-D TOP INSULATED 3062087 10

AB-SK 65-D 3026900 10

AB-SK 65-D INSULATED 3040889 10

Accessories Accessories Accessories

NLS-CU 3/10 SN 1000MM 0402174 10 NLS-CU 3/10 SN 1000MM 0402174 10 NLS-CU 3/10 SN 1000MM 0402174 10
UC-TM 5, UCT-TM 5 or ZB 5
UC-TMF 5, UCT-TMF 5 or ZBF 5
84,4
54,45

35,4

35,4
36,8

9,5

9,5
28,7

28,7

65 65 12,9 10 65 65 10 65 65
155,8 150 150

AB-SK-D TOP INSULATED AB-SK 65-D AB-SK 65-D INSULATED

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 527

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Installation and mounting material - CABINET add-on
Shielding
Support frame for direct mounting

The support frames are available in the

following versions:
– AB/SS for insulated installation on the
mounting plate and
– AB/SS-M for uninsulated installation on
the mounting plate
– For mounting SK and SKS shield connec-
tion clamps
Notes:
Support frame for Support frame for
For dimensional drawings, see www.phoenixcontact.net/products.
SK shield connection clamps SK & SKS shield connection clamps

Technical data Technical data

General data
Material PA PA

Ordering data Ordering data

Pcs. / Pcs. /
Description Color Type Order No. Type Order No.
Pkt. Pkt.
Support, insulated, with retaining screw, for 3 x 10 mm or 6 x 6 mm
busbars
gray AB/SS 0404428 10
Support, with contact to the mounting plate, with retaining screw,
for 3 x 10 mm busbars

gray AB/SS-M 3025888 10

Support, insulated, for 3 x 10 mm or 6 x 6 mm busbars

gray AB/SKS 3240224 10

Accessories Accessories
PEN conductor busbar, 3 x 10 mm, 1 m long,
material: copper, tin-plated, nominal current: 140 A

silver NLS-CU 3/10 SN 1000MM 0402174 10 NLS-CU 3/10 SN 1000MM 0402174 10

23,4 23,4 24
21,05
21,7

23
12,85

16,1

17,4
Ø4,5

4,5
19,4

19,4

24
5

AB/SS AB/SS-M AB/SKS

528 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Installation and mounting material - CABINET add-on
Shielding
Multi-level support
for direct mounting

Support, multi-level, insulated

Technical data
General data
Material PA
– Double and triple support frames for dif-
Ordering data
ferent busbars
– Type allows for an extremely compact de- Description Color Type Order No.
Pcs. /
Pkt.
sign using large amounts of wiring, e.g., for
Double support, insulating material, optionally for use with 3 x 10
multi-level front connection terminal mm or 6 x 6 mm neutral busbar, height: 48 mm
blocks
Height 48 mm gray AB2/SS 0404431 10
– Support frames are insulated Height 36.8 mm gray ABN 2/SS 0404460 10
– Direct mounting Triple support frame, made from insulating material
gray AB3/SS 0800086 10

Accessories
PEN conductor busbar, 3 x 10 mm, 1 m long, material: copper,
tin-plated, nominal current: 140 A

silver NLS-CU 3/10 SN 1000MM 0402174 10

PEN conductor busbar, in accordance with DIN VDE 0611-4, 6 x
6 mm, 1 m long, material: copper, tin-plated, nominal current: 140 A

silver NLS-CU 6/ 6 SN 1000MM 0402161 10

13 13

13 13 13 13

13
45

47,8
33,8

33,8
31

19,8

19,8

Ø4,5 Ø4,5 Ø4,5

27 24,5 29,5
42 42 71,5

AB2/SS ABN 2/SS AB3/SS

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 529

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Installation and mounting material - CABINET add-on
Shielding
Support frame for direct
and DIN rail mounting

Technical data
General data
Material Aluminum
– T-shaped support frames for space-saving
Ordering data
direct mounting and free positioning on
the mounting plate Description Color Type Order No.
Pcs. /
Pkt.
– Suitable for SK 5 to SK 14, SKS 8 and
Support, for direct mounting with contacting on the
SKS 14 shield connection clamps mounting surface
– Version for NS 35 DIN rail mounting silver AB-SK/E 3026476 10
Support frame, for mounting on NS 35 DIN rails

silver AB-SK/E-NS 35 3213111 10

56
20
15

56
53,4 19,1
Ø13
10
24,7
35,2

Ø4,5
Ø9

AB-SK/E-NS 35 AB-SK/E

530 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Installation and mounting material - CABINET add-on
Shielding
SK shield connection clamps SKS shield connection clamps Drilling and punching patterns for
SK...-D
Punching template Drilling plan
Dimensions in mm Dimensions in mm
a b c d e a b c d e f

SK 5 6.5 19.5 46.8 9 6 SKS 8 – 18 26 12.4 – –

SK 8 6.5 19.5 48.7 12 9 SKS 14 – 21 32 19 – –
SK 14 6.5 19.5 59.3 17 14 SKS 20 – 27 40.5 24.7 – –
7,5 13
SK 20 6.5 19.5 75 24 21 SKS 8-D – 18 26 12.4 – –

12
SK 28 6.5 20 93 32 28 SKS 14-D – 21 32 19 – –
SK 35 6.5 20 106.5 40 36 SKS 20-D – 27 40.5 24.7 – –
SK 5-D 6.5 19.5 46.8 9 6 SKS 8-NS35 6 18 26 12.4 52 54
3 12
SK 8-D 6.5 19.5 47.2 12 9 SKS 14-NS35 6 21 32 19 52 60
SK 14-D 6.5 19.5 57.8 17 14 SKS 20-NS35 6 27 40.5 24.7 52 68.4
SK 5-D
SK 20-D 6.5 19.5 73.5 24 21
SK 28-D 6.5 20 91.5 32 28
SK 35-D 6.5 20 105.0 41 36

10,5 13
b d

12
3 12
d b
max. c

SK 8-D
c
a

SK ... SKS ... 15,5 15,5

12
b d

3 12
d b
max. c

SK 14-D
c
a

e
22,5 22,5
SK ...-D SKS ...-D
12

d b
3 12

SK 20-D
c

30 30
12

a e

SKS ...-NS35

4 12

SK 28-D

38,5 38,5
12

4 12

SK 35-D

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 531

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Installation and mounting material - CABINET add-on
CES cable entry system

Saves space and costs Sealing frames with metal reinforce- Variable mounting options
The cable entry system (CES) allows a va- ment The CES sealing frames can be directly
riety of cables and protective hoses to be in- Because the sealing frames can be split, it mounted on standard panel cutouts
serted into control cabinets, distributor is possible to guide pre-assembled plug-in (e.g., Rittal) for industrial plug-in connec-
boxes or devices using a water- and dust- connectors through panel cutouts and sub- tors. Snap-up frames are available to simplify
proof method where space is at a premium. sequently seal with a high degree of protec- on-site installation.
– For protective hoses, see page 548 tion and reduce the strain according to
DIN EN 50262. Thanks to the integrated
metal reinforcement, only two locking ele-
ments are required on the front.

532 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Installation and mounting material - CABINET add-on
CES cable entry system

Optional latch Also for industrial plug-in connectors

Sealing frames with screw locking and Due to a widening of the standard Rittal
locking latches are available. The locking cutouts from 35 to 51 mm, even wide rect-
latch does not require any tools, which angular industrial plug-in connectors for
makes it really quick and easy to use, even double locking latches and plug assembly
in places that are difficult to access. frames can be swiveled through mounting
panels and sealed and provided with strain
relief using the CES.

Plastic vs. rubber sleeves Faster installation and a reliable seal

The gray thermoplastic sleeves exhibit a It only takes two coned sleeves to seal any
low level of flammability according to UL 94 cable diameter ranging from 2 to 24 mm.
V0 and are highly resistant to acids and lyes. The coned sleeves are cut to the appropri-
The black rubber sleeves (NBR) perform ate length and pushed on before the cables
significantly better in the long term, partic- are assembled. There is no longer any need
ularly in the event of temperature fluctua- to select corresponding slotted rubber seals
tions. They are also resistant to oil, fuels, on site, which can be a time-consuming pro-
and grease. All cable sleeves are halogen- cess, and the reliability of the seal has been
free. improved for ratings up to IP65.

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 533

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Installation and mounting material - CABINET add-on
CES cable entry system
Sealing frames for cable sleeves

Sealing frame with locking latch

Technical data
General data
Material PA
– Sealing frame with integrated metal rein- Degree of protection IP54
forcement to protect against deformation
– Only two locking elements are required
(screws or latch) Torque -
– Suitable for standard panel cutouts Inflammability class according to UL 94 V0
(e.g., Rittal) Temperature range [°C] -40 ... 120

– Snap-up frame for simplifying on-site Ordering data

installation Pcs. /
– Sealing frame with convenient locking Description   Type Order No.
Pkt.
latch for tool-free actuation Sealing frame, including flat gasket, for accommodating cable
– Marking for cable sleeve location on the sleeves, for standard cutout:
B10 (cutout: 35 mm x 65 mm), CES-B10-HFFS-PLBK 0801663 1
underside of the frame for up to 6 cable sleeves
B16 (cutout: 35 mm x 86 mm), CES-B16-HFFS-PLBK 0801662 1
Notes: for up to 8 cable sleeves
For dimensional drawings, see page 541. B24 (cutout: 35 mm x 113 mm), CES-B24-HFFS-PLBK 0801661 1
for up to 10 cable sleeves
If the panel cutout width is 51 mm, HC industrial plug-in connectors Snap-up frame, including integrated seal for mounting panel, for
and CIF plug assembly frames can also be fed through the panel accommodating sealing frames, for standard cutouts:
using the cable entry system (CES).
B10 (cutout: 35 mm x 65 mm)
B16 (cutout: 35 mm x 86 mm)
B24 (cutout: 35 mm x 113 mm)
Locking plate, metal, locks an unused snap-up frame,
transport protection, for standard cutouts:

B10
B16
B24

Accessories
Replacement flat gasket,
for sealing frame with standard cutout:
B10 (cutout: 35 mm x 65 mm) CES-B10-WRG-BK 0801725 10
B16 (cutout: 35 mm x 86 mm) CES-B16-WRG-BK 0801726 10
B24 (cutout: 35 mm x 113 mm) CES-B24-WRG-BK 0801727 10
M4 replacement screw, with 4 mm Allen screw head,
for sealing frame with screw locking

Bit screwdriver, with 1/4" quick-action chuck, suitable for bits

according to DIN 3126-C 6.3 and E 6.3/ISO 1173, magnetic

Screw bit, hexagonal, E6.3-1/4" drive, hardened,

suitable for holder according to DIN 3126-F6.3/ISO 1173

Size: hex 3 x 50 mm

534 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Installation and mounting material - CABINET add-on
CES cable entry system

Sealing frame with screw locking Snap-up frame Locking plates

Technical data Technical data Technical data

PA PA Steel, galvanized
IP55 / IP65 (when using a CES-SRC../CES-LRC.. cone sleeve and IP54 / IP55 (when using a CES-B...-SFFS-PLBK sealing frame with -
a cable binder) screw locking) / IP65 (when using a CES-B...-SFFS-PLBK sealing
frame with screw locking and a cone sleeve with cable binder)

2 Nm ... 4 Nm (Locking screw) - -

V0 V0 -
-40 ... 120 -20 ... 80 -

Ordering data Ordering data Ordering data

Pcs. / Pcs. / Pcs. /

Type Order No. Type Order No. Type Order No.
Pkt. Pkt. Pkt.

CES-B10-SFFS-PLBK 0801660 1

CES-B16-SFFS-PLBK 0801659 1

CES-B24-SFFS-PLBK 0801658 1

CES-B10-SF-PLBK 0801655 10
CES-B16-SF-PLBK 0801651 10
CES-B24-SF-PLBK 0801647 10

CES-B10-SFC-M 0801645 10
CES-B16-SFC-M 0801642 10
CES-B24-SFC-M 0801641 10

Accessories Accessories Accessories

CES-B10-WRG-BK 0801725 10
CES-B16-WRG-BK 0801726 10
CES-B24-WRG-BK 0801727 10

CES-SFFS-H 0801728 10

SF-M BH 1212070 1

SF-BIT-HEX 3-50 1212647 5

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 535

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Installation and mounting material - CABINET add-on
CES cable entry system
Cable sleeves, rubber

– Significantly improved long-term

performance
– Resistant to oil, fuels, and grease
– Halogen-free
Notes:
The CES cable entry system was developed according to
DIN EN 50262 (Cable glands for electrical installations).

The cable sleeves must be mounted in accordance with the

mounting instructions provided.
Cable sleeves, small Cable sleeves, large

Technical data Technical data

General data
Material NBR NBR
Degree of protection IP54 / IP55 (when using a CES-B...-SFFS-PLBK sealing frame with IP54 / IP55 (when using a CES-B...-SFFS-PLBK sealing frame with
screw locking) screw locking)
Temperature range [°C] -40 ... 80 -40 ... 80

Ordering data Ordering data

Pcs. / Pcs. /
Description Color Type Order No. Type Order No.
Pkt. Pkt.
Cone-shaped cable sleeves, IP65 in sealing frames with screw
locking and cable binders, IP54 in sealing frames with locking latch.
For cables with a diameter of:

2 - 11 mm black CES-SRC-BK 0801718 10

7 - 24 mm black CES-LRC-BK 0801719 10
Cable sleeves, IP65, without bore hole, can be used in sealing
frames with locking latch and screw locking

black CES-SRG-BK 0801670 10 CES-LRG-BK 0801671 10

Cable sleeves, small, slotted, can be used in sealing frames with
locking latch and screw locking, for cable diameter of:

1 - 2 mm black CES-SRG-BK-2 0801635 10

2 - 3 mm black CES-SRG-BK-3 0801633 10
3 - 4 mm black CES-SRG-BK-4 0801632 10
4 - 5 mm black CES-SRG-BK-5 0801630 10
5 - 6 mm black CES-SRG-BK-6 0801628 10
6 - 7 mm black CES-SRG-BK-7 0801627 10
7 - 8 mm black CES-SRG-BK-8 0801625 10
8 - 9 mm black CES-SRG-BK-9 0801622 10
9 - 10 mm black CES-SRG-BK-10 0801620 10
10 - 11 mm black CES-SRG-BK-11 0801618 10
11 - 12 mm black CES-SRG-BK-12 0801617 10
12 - 13 mm black CES-SRG-BK-13 0801616 10
13 - 14 mm black CES-SRG-BK-14 0801615 10
14 - 15 mm black CES-SRG-BK-15 1410563 10
15 - 16 mm black CES-SRG-BK-16 1410576 10
16 - 17 mm black CES-SRG-BK-17 1410589 10
Cable sleeves, large, slotted, can be used in sealing frames with
locking latch and screw locking, for cable diameter of:

14 - 15 mm black CES-LRG-BK-15 0801619 10

15 - 16 mm black CES-LRG-BK-16 0801621 10
16 - 17 mm black CES-LRG-BK-17 0801624 10
17 - 18 mm black CES-LRG-BK-18 0801626 10
18 - 19 mm black CES-LRG-BK-19 0801629 10
19 - 20 mm black CES-LRG-BK-20 0801631 10
20 - 21 mm black CES-LRG-BK-21 0801634 10
21 - 22 mm black CES-LRG-BK-22 0801637 10
22 - 23 mm black CES-LRG-BK-23 0801638 10
23 - 24 mm black CES-LRG-BK-24 0801639 10
24 - 25 mm black CES-LRG-BK-25 0801640 10
25 - 26 mm black CES-LRG-BK-26 0801643 10
26 - 27 mm black CES-LRG-BK-27 0801644 10
27 - 28 mm black CES-LRG-BK-28 0801646 10
28 - 29 mm black CES-LRG-BK-29 0801648 10
29 - 30 mm black CES-LRG-BK-30 0801650 10
30 - 31 mm black CES-LRG-BK-31 0801653 10
31 - 32 mm black CES-LRG-BK-32 0801654 10
32 - 33 mm black CES-LRG-BK-33 0801656 10

536 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Installation and mounting material - CABINET add-on
CES cable entry system
Cable sleeves, rubber, special formats

– Significantly improved long-term

performance
– Resistant to oil, fuels, and grease
– Halogen-free
Notes:
The CES cable entry system was developed according to
DIN EN 50262 (Cable glands for electrical installations).

The cable sleeves must be mounted in accordance with the

mounting instructions provided.
Cable sleeves, small, with several bore holes Cable sleeves, small, for AS interface cables

Technical data Technical data

General data
Material NBR NBR
Degree of protection IP54 / IP55 (when using a CES-B...-SFFS-PLBK sealing frame with IP54
screw locking)
Temperature range [°C] -40 ... 80 -40 ... 80

Ordering data Ordering data

Pcs. / Pcs. /
Description Color Type Order No. Type Order No.
Pkt. Pkt.
Cable sleeves, with 2 bore holes, small, slotted, can be used in
sealing frames with locking latch and screw locking, for cable diam-
eter of:

2 x 2 mm ... 3 mm black CES-SRG-BK-2X3 1410398 10

2 x 3 mm ... 4 mm black CES-SRG-BK-2X4 1410408 10
2 x 4 mm ... 5 mm black CES-SRG-BK-2X5 0801657 10
2 x 5 mm ... 6 mm black CES-SRG-BK-2X6 0801664 10
2 x 6 mm ... 7 mm black CES-SRG-BK-2X7 1410084 10
2 x 7 mm ... 8 mm black CES-SRG-BK-2X8 1410097 10
2 x 8 mm ... 9 mm black CES-SRG-BK-2X9 1410411 10
Cable sleeves, with 4 bore holes, small, slotted, can be used in
sealing frames with locking latch and screw locking,
for cable diameter of:

4 x 2 mm ... 3 mm black CES-SRG-BK-4X3 0801665 10

4 x 3 mm ... 4 mm black CES-SRG-BK-4X4 0801666 10
4 x 4 mm ... 5 mm black CES-SRG-BK-4X5 1410107 1
4 x 5 mm ... 6 mm black CES-SRG-BK-4X6 1410152 1
Cable sleeve, IP54, slotted, for one AS-Interface cable,
cable arrangement:
L black CES-SRG-BK-1ASI-L 1410042 10
R black CES-SRG-BK-1ASI-R 0801667 10
Cable sleeve, IP54, slotted, for two AS-Interface cables,
cable arrangement:
LL black CES-SRG-BK-2ASI-LL 1410055 10
RR black CES-SRG-BK-2ASI-RR 0801668 10
LR black CES-SRG-BK-2ASI-LR 0801669 10

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 537

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Installation and mounting material - CABINET add-on
CES cable entry system
Cable sleeves, thermoplastics

– Thermoplastic sleeves exhibit a low level

of flammability according to UL 94 V0
– They have a high level of resistance to
acids and lyes
Notes:
The CES cable entry system was developed according to
DIN EN 50262 (Cable glands for electrical installations).

The cable sleeves must be mounted in accordance with the

mounting instructions provided.
Cable sleeves, small Cable sleeves, large

Technical data Technical data

General data
Material SEBS SEBS
Degree of protection IP54 / IP55 (when using a CES-B...-SFFS-PLBK sealing frame with IP54 / IP55 (when using a CES-B...-SFFS-PLBK sealing frame with
screw locking) screw locking)
Inflammability class according to UL 94 V0 V0
Temperature range [°C] -40 ... 80 -40 ... 80

Ordering data Ordering data

Pcs. / Pcs. /
Description Color Type Order No. Type Order No.
Pkt. Pkt.
Cable sleeves, small, slotted, can be used in sealing frames with
locking latch and screw locking, for cable diameter of:

1 - 2 mm gray CES-STPG-GY-2 0801672 10

2 - 3 mm gray CES-STPG-GY-3 0801673 10
3 - 4 mm gray CES-STPG-GY-4 0801674 10
4 - 5 mm gray CES-STPG-GY-5 0801675 10
5 - 6 mm gray CES-STPG-GY-6 0801676 10
6 - 7 mm gray CES-STPG-GY-7 0801677 10
7 - 8 mm gray CES-STPG-GY-8 0801679 10
8 - 9 mm gray CES-STPG-GY-9 0801680 10
9 - 10 mm gray CES-STPG-GY-10 0801682 10
10 - 11 mm gray CES-STPG-GY-11 0801683 10
11 - 12 mm gray CES-STPG-GY-12 0801684 10
12 - 13 mm gray CES-STPG-GY-13 0801685 10
13 - 14 mm gray CES-STPG-GY-14 0801686 10
14 - 15 mm gray CES-STPG-GY-15 1410521 10
15 - 16 mm gray CES-STPG-GY-16 1410534 10
16 - 17 mm gray CES-STPG-GY-17 1410547 10
Cable sleeves, large, slotted, can be used in sealing frames with
locking latch and screw locking, for cable diameter of:

14 - 15 mm gray CES-LTPG-GY-15 0801687 10

15 - 16 mm gray CES-LTPG-GY-16 0801688 10
16 - 17 mm gray CES-LTPG-GY-17 0801689 10
17 - 18 mm gray CES-LTPG-GY-18 0801690 10
18 - 19 mm gray CES-LTPG-GY-19 0801691 10
19 - 20 mm gray CES-LTPG-GY-20 0801692 10
20 - 21 mm gray CES-LTPG-GY-21 0801693 10
21 - 22 mm gray CES-LTPG-GY-22 0801695 10
22 - 23 mm gray CES-LTPG-GY-23 0801696 10
23 - 24 mm gray CES-LTPG-GY-24 0801697 10
24 - 25 mm gray CES-LTPG-GY-25 0801698 10
25 - 26 mm gray CES-LTPG-GY-26 0801699 10
26 - 27 mm gray CES-LTPG-GY-27 0801700 10
27 - 28 mm gray CES-LTPG-GY-28 0801701 10
28 - 29 mm gray CES-LTPG-GY-29 0801702 10
29 - 30 mm gray CES-LTPG-GY-30 0801703 10
30 - 31 mm gray CES-LTPG-GY-31 0801705 10
31 - 32 mm gray CES-LTPG-GY-32 0801706 10
32 - 33 mm gray CES-LTPG-GY-33 0801707 10
Cable sleeves, IP65, without bore hole, can be used in sealing
frames with locking latch and screw locking

gray CES-STPG-GY 0801715 10 CES-LTPG-GY 0801716 10

538 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Installation and mounting material - CABINET add-on
CES cable entry system
Cable sleeves, thermoplastics,
special formats

– Thermoplastic sleeves exhibit a low level

of flammability according to UL 94 V0
– They have a high level of resistance
to acids and lyes
Notes:
The CES cable entry system was developed according to
DIN EN 50262 (Cable glands for electrical installations).

The cable sleeves must be mounted in accordance with the

mounting instructions provided.
Cable sleeves, small, with several bore holes Cable sleeves, small, for AS interface cables

Technical data Technical data

General data
Material SEBS SEBS
Degree of protection IP54 / IP55 (when using a CES-B...-SFFS-PLBK sealing frame with IP54
screw locking)
Inflammability class according to UL 94 V0 V0
Temperature range [°C] -40 ... 80 -40 ... 80

Ordering data Ordering data

Pcs. / Pcs. /
Description Color Type Order No. Type Order No.
Pkt. Pkt.
Cable sleeves, with 2 bore holes, small, slotted, can be used in
sealing frames with locking latch and screw locking,
for cable diameter of:

2 x 2 mm ... 3 mm gray CES-STPG-GY-2X3 1410424 10

2 x 3 mm ... 4 mm gray CES-STPG-GY-2X4 1410438 10
2 x 4 mm ... 5 mm gray CES-STPG-GY-2X5 0801708 10
2 x 5 mm ... 6 mm gray CES-STPG-GY-2X6 0801709 10
2 x 6 mm ... 7 mm gray CES-STPG-GY-2X7 1410110 10
2 x 7 mm ... 8 mm gray CES-STPG-GY-2X8 1410123 10
2 x 8 mm ... 9 mm gray CES-STPG-GY-2X9 1410440 10
Cable sleeves, with 4 bore holes, small, slotted, can be used in
sealing frames with locking latch and screw locking,
for cable diameter of:

4 x 2 mm ... 3 mm gray CES-STPG-GY-4X3 0801710 10

4 x 3 mm ... 4 mm gray CES-STPG-GY-4X4 0801711 10
4 x 4 mm ... 5 mm gray CES-STPG-GY-4X5 1410136 10
4 x 5 mm ... 6 mm gray CES-STPG-GY-4X6 1410149 10
Cable sleeve, IP54, slotted, for one AS-Interface cable, cable
arrangement:
L gray CES-STPG-GY-1ASI-L 1410068 10
R gray CES-STPG-GY-1ASI-R 0801712 10
Cable sleeve, IP54, slotted, for two AS-Interface cables, cable
arrangement:
LL gray CES-STPG-GY-2ASI-LL 1410071 10
RR gray CES-STPG-GY-2ASI-RR 0801713 10
LR gray CES-STPG-GY-2ASI-LR 0801714 10

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 539

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Installation and mounting material - CABINET add-on
CES cable entry system
Accessories, filler plugs, seals,
replacement screws

Diameter of 2 to 17 mm For mounting on CES sealing frames

Technical data Technical data

General data
Material PA Stainless steel
Degree of protection IP54 / IP55 (when using a CES-B...-SFFS-PLBK sealing frame with -
screw locking)
Inflammability class according to UL 94 V0 -
Temperature range [°C] -20 ... 80 -

Ordering data Ordering data

Pcs. / Pcs. /
Description Color Type Order No. Type Order No.
Pkt. Pkt.
Plugs, for closing unoccupied cable sleeves
with a diameter of:
2 mm white KDT-ST 2 1410220 25
3 mm white KDT-ST 3 3063921 25
4 mm white KDT-ST 4 3063934 25
5 mm white KDT-ST 5 3063947 25
6 mm white KDT-ST 6 3063950 25
7 mm white KDT-ST 7 3063963 25
8 mm white KDT-ST 8 3063976 25
9 mm white KDT-ST 9 3063989 25
10 mm white KDT-ST 10 3063992 25
11 mm white KDT-ST 11 3064001 25
12 mm white KDT-ST 12 3062016 25
13 mm white KDT-ST 13 3062029 25
14 mm white KDT-ST 14 3062032 25
15 mm white KDT-ST 15 3062045 25
16 mm white KDT-ST 16 3062058 25
17 mm white KDT-ST 17 3062061 25
EMC cable catch rail, for mounting on the longitudinal side of
the CES sealing frame CES-B16...
KEL-EMV 16-4 3063507 5
EMC cable catch rail, for mounting on the longitudinal side of
the CES sealing frame CES-B24...
KEL-EMV 24-5 3063510 5
EMC cable catch rail, for mounting on the diagonal side of the
CES sealing frames CES-B16 and CES-24

KEL-EMV-F 3063523 5

540 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Installation and mounting material - CABINET add-on
CES cable entry system

Dimensional drawings
CES... sealing frame

99,2 120 147

83 20 103 20 130 20
58,5
37,5

58,5
37,5

58,5
37,5
32

32

32
58,5 78 97,5

CES-B10-HFFS-PLBK CES-B16-HFFS-PLBK CES-B24-HFFS-PLBK

CES-B10-SFFS-PLBK CES-B16-SFFS-PLBK CES-B24-SFFS-PLBK

Dimensional drawings
CES... snap-up frame

108 128 155

38
38

38

64
46
32
64

64
46
32

46
32

65 85 112
83 103 130

CES-B10-SF-PLBK CES-B16-SF-PLBK CES-B24-SF-PLBK

Dimensional drawings
CES... locking plate

99 17 118 17 146 17
57

22

57

22

57

22

91 1,5 110 1,5 138 1,5

CES-B10-SFC-M CES-B16-SFC-M CES-B24-SFC-M

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 541

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Installation and mounting material - CABINET add-on
Cable routing, cable protection, cable bundling

Cable routing Cable protection Cable bundling

The wide choice of cable ducts provides The extensive product range of protec- For bundling cables, detectable cable
users with flexible and straightforward ca- tive hoses made of plastic and metal offers binders and stainless steel or plastic cable
ble installation solutions that simply involve the ideal solution for every application. binders are available in either a removable
breaking out the lateral segments without Protective hose screw connections with version or with a labeling area.
any need for tools. The cable ducts are avail- tool-free quick mounting function and vari- Whether you are working in the food indus-
able in different colors and with a halogen- ous IP degrees of protection round off the try or the offshore sector, our comprehen-
free design. range of products. sive product range offers the ideal solution
for every application.

542 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Installation and mounting material - CABINET add-on
Cable routing, cable protection, cable bundling
Halogen-free cable ducts Notes:
and accessories For cable ducts cut to customer requirements,
visit www.phoenixcontact.net/products



Technical data
General data
Material PC/ABS
Halogen-free cable ducts are recom- Components Halogen-free
mended for use in many areas that are sub- Inflammability class according to UL 94 V0
Temperature range [°C] -25 ... 90
ject to high safety requirements, such as
high-rise buildings, office buildings, and pub- Ordering data
lic facilities where there is a high volume of Description Color Type Order No.
Pcs. /
foot traffic, e.g., airports. The key features Pkt.

of the cable ducts are as follows: Cable duct, 2000 mm long, consisting of lower and upper part

– Installed conductors are securely held in W x H: 25 x 25 mm Light gray CD-HF 25X25 3240340 25
place by means of wire retaining clips that W x H: 25 x 40 mm Light gray CD-HF 25X40 3240341 24
W x H: 25 x 60 mm Light gray CD-HF 25X60 3240342 15
can be snapped onto bars on the side W x H: 25 x 80 mm Light gray CD-HF 25X80 3240343 10
– The wide, diagonal heads of the cable W x H: 30 x 40 mm Light gray CD-HF 30X40 3240344 20
duct bars make it easy to fit the cover and W x H: 30 x 60 mm Light gray CD-HF 30X60 3240345 24
W x H: 30 x 80 mm Light gray CD-HF 30X80 3240346 12
hold it securely in place W x H: 30 x 100 mm Light gray CD-HF 30X100 3240347 12
– Predetermined breaking point enables W x H: 40 x 40 mm Light gray CD-HF 40X40 3240348 25
tool-free, burr-free removal of bars W x H: 40 x 60 mm Light gray CD-HF 40X60 3240349 20
W x H: 40 x 80 mm Light gray CD-HF 40X80 3240350 10
– Fast and seamless creation of T and cross W x H: 40 x 100 mm Light gray CD-HF 40X100 3240351 10
connections by means of an additional W x H: 60 x 40 mm Light gray CD-HF 60X40 3240352 20
W x H: 60 x 60 mm Light gray CD-HF 60X60 3240353 12
predetermined breaking point in the cable W x H: 60 x 80 mm Light gray CD-HF 60X80 3240354 10
duct base W x H: 60 x 100 mm Light gray CD-HF 60X100 3240355 8
– Cover is securely held in place for both W x H: 80 x 25 mm Light gray CD-HF 80X25 3240356 12
W x H: 80 x 40 mm Light gray CD-HF 80X40 3240357 15
horizontal and vertical mounting W x H: 80 x 60 mm Light gray CD-HF 80X60 3240358 10
W x H: 80 x 80 mm Light gray CD-HF 80X80 3240359 6
W x H: 80 x 100 mm Light gray CD-HF 80X100 3240360 8
W x H: 100 x 40 mm Light gray CD-HF 100X40 3240361 10
W x H: 100 x 60 mm Light gray CD-HF 100X60 3240362 8
W x H: 100 x 80 mm Light gray CD-HF 100X80 3240363 6
W x H: 100 x 100 mm Light gray CD-HF 100X100 3240364 6
W x H: 120 x 60 mm Light gray CD-HF 120X60 3240365 6
W x H: 120 x 80 mm Light gray CD-HF 120X80 3240366 4

Accessories
Upper cable duct part, 2000 mm long

For a width of 25 mm CD-HF COVER 25 3240369 14

For a width of 30 mm CD-HF COVER 30 3240370 10
For a width of 40 mm CD-HF COVER 40 3240371 14
For a width of 60 mm CD-HF COVER 60 3240372 10
For a width of 80 mm CD-HF COVER 80 3240373 10
For a width of 100 mm CD-HF COVER 100 3240367 7
For a width of 120 mm CD-HF COVER 120 3240368 6
Universal wire holding bracket, pre-perforated
for cable duct widths of 40, 60, 80, and 100 mm

CD WR 3240284 10
Plastic body-bound rivet, 4 mm diameter,
for a material thickness of 1.5 ... 6 mm
RVT-PA 4 3240498 100
6 mm diameter, material thickness of 2 ... 8 mm RVT-PA 6 3240499 100

Rivet setting tool, for use with RVT-PA 4 plastic body-bound

rivets
UNIFOX-RVT P 4 1212478 1
Rivet setting tool, for use with RVT-PA 6 plastic body-bound
rivets
UNIFOX-RVT P 6 1212509 1

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 543

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Installation and mounting material - CABINET add-on
Cable routing, cable protection, cable bundling
Cable ducts and accessories

Notes:
For cable ducts cut to customer requirements, visit:
www.phoenixcontact.net/products.

General data
Material
– Installed conductors are securely held in – Predetermined breaking point enables Inflammability class according to UL 94
place by means of wire retaining clips that tool-free, burr-free removal of bars Temperature range [°C]

can be snapped onto bars on the side – The CUTFOX-CD cable duct cutter for
– The wide, diagonal heads of the cable easy cutting with minimum effort and no
duct bars make it easy to fit the cover and burrs Description  

hold it securely in place Cable duct, 2000 mm long, consisting of lower and upper part

W x H: 25 x 25 mm
W x H: 25 x 40 mm
W x H: 25 x 60 mm
W x H: 25 x 80 mm
W x H: 30 x 40 mm
W x H: 30 x 60 mm
W x H: 30 x 80 mm
W x H: 30 x 100 mm
W x H: 40 x 40 mm
W x H: 40 x 60 mm
W x H: 40 x 80 mm
W x H: 40 x 100 mm
W x H: 60 x 40 mm
W x H: 60 x 60 mm
W x H: 60 x 80 mm
W x H: 60 x 100 mm
W x H: 80 x 25 mm
W x H: 80 x 40 mm
W x H: 80 x 60 mm
W x H: 80 x 80 mm
W x H: 80 x 100 mm
W x H: 100 x 40 mm
W x H: 100 x 60 mm
W x H: 100 x 80 mm
W x H: 100 x 100 mm
W x H: 120 x 60 mm
W x H: 120 x 80 mm

Upper cable duct part, 2000 mm long

For a width of 25 mm

For a width of 30 mm
For a width of 40 mm
For a width of 60 mm
– Plastic body-bound rivets enable easy fix- – Thanks to its powerful leverage and For a width of 80 mm
ing of cable ducts using the rivet setting special blade geometry, the PPS CD cable For a width of 100 mm
tool duct cutter allows easy cutting with For a width of 120 mm
Universal wire holding bracket, pre-perforated for cable duct
minimum effort and no burrs widths of 40, 60, 80, and 100 mm

Plastic body-bound rivet, 4 mm diameter, for a material thickness

of 1.5 ... 6 mm

6 mm diameter, material thickness of 2 ... 8 mm

Rivet setting tool, for use with RVT-PA 4 plastic body-bound riv-
ets

Rivet setting tool, for use with RVT-PA 6 plastic body-bound riv-
ets

544 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Installation and mounting material - CABINET add-on
Cable routing, cable protection, cable bundling

Cable ducts, gray Cable ducts, white Cable ducts, blue

  

Technical data Technical data Technical data

PVC PVC PVC

V0 V0 V0
-5 ... 60 -5 ... 60 -5 ... 60

Ordering data Ordering data Ordering data

Pcs. / Pcs. / Pcs. /

Type Order No. Type Order No. Type Order No.
Pkt. Pkt. Pkt.

CD 25X25 3240187 25 CD 25X25 WH 3240616 25 CD 25X25 BU 3240301 25

CD 25X40 3240188 24 CD 25X40 WH 3240617 24 CD 25X40 BU 3240302 24
CD 25X60 3240191 15 CD 25X60 WH 3240618 15 CD 25X60 BU 3240303 15
CD 25X80 3240197 10 CD 25X80 WH 3240619 10 CD 25X80 BU 3240304 10
CD 30X40 3240278 20 CD 30X40 WH 3240620 20 CD 30X40 BU 3240305 20
CD 30X60 3240280 24 CD 30X60 WH 3240621 24 CD 30X60 BU 3240306 24
CD 30X80 3240282 12 CD 30X80 WH 3240622 12 CD 30X80 BU 3240307 12
CD 30X100 3240283 12 CD 30X100 WH 3240623 12 CD 30X100 BU 3240308 12
CD 40X40 3240189 25 CD 40X40 WH 3240624 25 CD 40X40 BU 3240309 25
CD 40X60 3240192 20 CD 40X60 WH 3240625 20 CD 40X60 BU 3240310 20
CD 40X80 3240198 10 CD 40X80 WH 3240626 10 CD 40X80 BU 3240311 10
CD 40X100 3240294 10 CD 40X100 WH 3240627 10 CD 40X100 BU 3240312 10
CD 60X40 3240190 20 CD 60X40 WH 3240628 20 CD 60X40 BU 3240313 20
CD 60X60 3240193 12 CD 60X60 WH 3240629 12 CD 60X60 BU 3240314 12
CD 60X80 3240199 10 CD 60X80 WH 3240630 10 CD 60X80 BU 3240315 10
CD 60X100 3240263 8 CD 60X100 WH 3240631 8 CD 60X100 BU 3240316 8
CD 80X25 3240281 12 CD 80X25 WH 3240632 12 CD 80X25 BU 3240317 12
CD 80X40 3240335 15 CD 80X40 WH 3240633 15 CD 80X40 BU 3240318 15
CD 80X60 3240194 10 CD 80X60 WH 3240634 10 CD 80X25 BU 3240317 12
CD 80X80 3240200 6 CD 80X80 WH 3240635 6 CD 80X80 BU 3240320 6
CD 80X100 3240264 8 CD 80X100 WH 3240636 8 CD 80X100 BU 3240321 8
CD 100X40 3240279 10 CD 100X40 WH 3240637 10 CD 100X40 BU 3240322 10
CD 100X60 3240195 8 CD 100X60 WH 3240638 8 CD 100X60 BU 3240323 8
CD 100X80 3240201 6 CD 100X80 WH 3240639 6 CD 100X80 BU 3240324 6
CD 100X100 3240205 6 CD 100X100 WH 3240640 6 CD 100X100 BU 3240325 6
CD 120X60 3240196 6 CD 120X60 WH 3240641 6 CD 120X60 BU 3240326 6
CD 120X80 3240202 4 CD 120X80 WH 3240642 4 CD 120X80 BU 3240327 4

Accessories Accessories Accessories

CD COVER 25 3240285 14 CD COVER 25 WH 3240645 14 CD COVER 25 BU 3240330 14

CD COVER 30 3240295 20 CD COVER 30 WH 3240646 10 CD COVER 30 BU 3240331 10
CD COVER 40 3240286 14 CD COVER 40 WH 3240647 14 CD COVER 40 BU 3240332 14
CD COVER 60 3240287 10 CD COVER 60 WH 3240648 10 CD COVER 60 BU 3240333 10
CD COVER 80 3240288 10 CD COVER 80 WH 3240649 10 CD COVER 80 BU 3240334 10
CD COVER 100 3240289 6 CD COVER 100 WH 3240643 6 CD COVER 100 BU 3240328 6
CD COVER 120 3240290 6 CD COVER 120 WH 3240644 6 CD COVER 120 BU 3240329 6

CD WR 3240284 10 CD WR 3240284 10 CD WR 3240284 10

RVT-PA 4 3240498 100 RVT-PA 4 3240498 100 RVT-PA 4 3240498 100

RVT-PA 6 3240499 100 RVT-PA 6 3240499 100 RVT-PA 6 3240499 100

UNIFOX-RVT P 4 1212478 1 UNIFOX-RVT P 4 1212478 1 UNIFOX-RVT P 4 1212478 1

UNIFOX-RVT P 6 1212509 1 UNIFOX-RVT P 6 1212509 1 UNIFOX-RVT P 6 1212509 1

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 545

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Installation and mounting material - CABINET add-on
Cable routing, cable protection, cable bundling
Cable duct cutters

Technical data
Dimensions Width Length Height
[mm] - 245 -
– Easy, burr-free cutting with minimum General data
effort thanks to the special cutting Weight [kg] 0.43

geometry and optimum leverage Ordering data

– Non-slip ergonomic grip Pcs. /
– With spring reset Description Color Type Order No.
Pkt.
– 45° limit stop Cable duct cutter
– 75 mm cutting width black CUTFOX-CD 1212474 1
Cable duct cutters
black PPS CD M 1207569 1

Accessories
Replacement blade, for PPS CD M
PPS CD BLADE 1207572 1
Replacement counter support (grip protection), for PPS CD M

PPS CD M COHO 1208995 1

Workbench, with plywood panel 700 x 1200 x 50 mm,
without mounting screws and bore holes
PPS TABLE 1206285 1

546 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Installation and mounting material - CABINET add-on
Cable routing, cable protection, cable bundling
Cable clamps and DIN rail

Cable clamps
for a cable diameter of 6 - 64 mm

Technical data
General data
Material Steel
– The cable clamps provide strain relief
Ordering data
– Individual or bundled cables with a diam-
eter of up to 64 mm can be safely and Description   Type Order No.
Pcs. /
Pkt.
easily installed
Cable clamp, for DIN rail
– The halogen-free plastic troughs have For cable diameters of 6 - 14 mm WCC 14 3240252 25
been designed to be perfectly secure For cable diameters of 12 - 18 mm WCC 18 3240253 25
while at the same time protecting the For cable diameters of 18 - 22 mm WCC 22 3240254 25
For cable diameters of 22 - 26 mm WCC 26 3240255 25
conductors For cable diameters of 26 - 30 mm WCC 30 3240256 25
For cable diameters of 30 - 34 mm WCC 34 3240257 25
For cable diameters of 34 - 38 mm WCC 38 3240258 25
For cable diameters of 38 - 42 mm WCC 42 3240259 25
For cable diameters of 42 - 56 mm WCC 56 3240260 25
For cable diameters of 56 - 64 mm WCC 64 3240261 25
DIN rails, for cable clamps
NS 30/15 PERF.2000MM 3240262 5

16
R0,5
1,5
15

30

9
28,5

32
15
25

6,2

NS 30/15 PERF. 2000MM DIN rail

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 547

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Installation and mounting material - CABINET add-on
Cable routing, cable protection, cable bundling
Protective hoses made of plastic Notes:
Pcs. / Pkt. specifies the protective hose length in [m].

Slotted, outside diameter of 21.2 - 42.5 mm

Technical data
General data
Material PA
The plastic protective hoses offer opti- Components Free from silicone, halogen, and cadmium
mum protection, thanks to the following Inflammability class according to UL 94 HB
Temperature range [°C] -40 ... 105
properties:
– Airtight and liquid tight Ordering data
– Oil-resistant up to +80°C Description Color Type Order No.
Pcs. /
– Gasoline-resistant Pkt.

– Largely resistant to acids and solvents Protective hose, slotted, for retrofitting

– Free from silicone, halogen, and cadmium Diameter [mm] Bending radius [mm]
– UV resistant Outside/inside static
21.2 / 16.5 40 black WP-PA HF-SL 21,2 BK 3240845 10
28.5 / 23 45 black WP-PA HF-SL 28,5 BK 3240846 10
The V0 version offers additional protec- 34.5 / 29 55 black WP-PA HF-SL 34,5 BK 3240847 10
tion, thanks to its self-extinguishing proper- 42.5 / 36 65 black WP-PA HF-SL 42,5 BK 3240848 10
Protective hose
ty. This makes it suitable for use in the Diameter [mm] Bending radius [mm]
following areas: Outside/inside static/dynamic
10 / 6.5 13 / 35 black
– Machine and system engineering 13 / 10 20 / 45 black
– Vehicle construction 15.8 / 12 35 / 55 black
– Rail vehicles 21.2 / 16.5 45 / 75 black
28.5 / 23 55 / 100 black
– Shipbuilding 34.5 / 29 65 / 120 black
– Automation 42.5 / 36 90 / 150 black
Protective hose
– Electrical systems Diameter [mm] Bending radius [mm]
Outside/inside static/dynamic
The transition and end sleeves offer an al- 10 / 6.5 13 / 35 black
13 / 10 20 / 45 black
ternative form of termination to the actual 15.8 / 12 35 / 55 black
cable gland. 21.2 / 16.5 45 / 75 black
28.5 / 23 55 / 100 black
– Can be used wherever it is not possible or 34.5 / 29 65 / 120 black
necessary to attach a cable gland 42.5 / 36 90 / 150 black
– Prevent damage to the conductors being Transition sleeves, from hose to cable
Diameter [mm]
fed through Outside/inside
10 / 8 black
13 / 10 black
15.8 / 12 black
21.2 / 16.5 black
28.2 / 23 black
34.5 / 29 black
42.5 / 37 black
End sleeves
Diameter [mm]
Outside/inside
10 / 4.3 black
13 / 7.8 black
15.8 / 10.3 black
21.2 / 14.3 black
28.2 / 20.8 black
34.5 / 26.8 black
42.5 / 33.8 black

548 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Installation and mounting material - CABINET add-on
Cable routing, cable protection, cable bundling

PA 6.6 V0 plastic protective hose, PA 6.6 HB plastic protective hose, Transition sleeve for
outside diameter of 10 - 42.5 mm outside diameter of 10 - 42.5 mm protective hose diameters of 10 - 42.5 mm

  

Technical data Technical data Technical data

PA PA TPE
Free from silicone, halogen, and cadmium Free from silicone, halogen, and cadmium Halogen-free
HB HB HB
-40 ... 115 -40 ... 105 -40 ... 120

Ordering data Ordering data Ordering data

Pcs. / Pcs. / Pcs. /

Type Order No. Type Order No. Type Order No.
Pkt. Pkt. Pkt.

WP-PA HF 10,0 BK 3240680 50

WP-PA HF 13,0 BK 3240681 50
WP-PA HF 15,8 BK 3240682 50
WP-PA HF 21,2 BK 3240683 50
WP-PA HF 28,5 BK 3240684 50
WP-PA HF 34,5 BK 3241088 25
WP-PA HF 42,5 BK 3241089 25

WP-PA HF-HB 10,0 BK 3240838 50

WP-PA HF-HB 13,0 BK 3240839 50
WP-PA HF-HB 15,8 BK 3240840 50
WP-PA HF-HB 21,2 BK 3240841 50
WP-PA HF-HB 28,5 BK 3240842 50
WP-PA HF-HB 34,5 BK 3240843 25
WP-PA HF-HB 42,5 BK 3240844 25

WP-EC TPE HF 10,0 BK 3240974 50

WP-EC TPE HF 13,0 BK 3240975 50
WP-EC TPE HF 15,8 BK 3240976 50
WP-EC TPE HF 21,2 BK 3240977 50
WP-EC TPE HF 28,5 BK 3240978 25
WP-EC TPE HF 34,5 BK 3240979 25
WP-EC TPE HF 42,5 BK 3240980 25

WP-SC PA HF 10,0 BK 3240981 50

WP-SC PA HF 13,0 BK 3240982 50
WP-SC PA HF 15,8 BK 3240983 50
WP-SC PA HF 21,2 BK 3240984 50
WP-SC PA HF 28,5 BK 3240985 25
WP-SC PA HF 34,5 BK 3240986 25
WP-SC PA HF 42,5 BK 3240987 25

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 549

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Installation and mounting material - CABINET add-on
Cable routing, cable protection, cable bundling
Screw connections Notes:
for plastic protective hoses For accessories and dimensional drawings,
see www.phoenixcontact.net/products.

IP66 degree of protection, Pg7 - Pg36 thread



Technical data
General data
Material PA
The plastic screw connections with Components Free from silicone, halogen, and cadmium
straight design are available in IP66 and Degree of protection IP66
Thread type Pg
IP69K protection classes. Inflammability class according to UL 94 V0
They offer the following features: Temperature range [°C] -40 ... 115
– Vibration-resistant, automatic protective Ordering data
hose latching
Pcs. /
– Pg or metric thread Description Color Type Order No.
Pkt.
– Resistant to oil and gasoline Screw connection, IP66, straight, with Pg thread, for protective
– Resistant to acids and solvents hose outside diameter [mm]
10 black WP-G HF IP66 PG7 BK 3240888 50
– Free from silicone, halogen, and cadmium 13 black WP-G HF IP66 PG9 BK 3240889 50
15.8 black WP-G HF IP66 PG11 BK 3240890 50
21.2 black WP-G HF IP66 PG16 BK 3240891 50
Tool-free protective hose mounting 28.5 black WP-G HF IP66 PG21 BK 3240892 25
– Secure, reliable, and easy latching in the 34.5 black WP-G HF IP66 PG29 BK 3240893 25
42.5 black WP-G HF IP66 PG36 BK 3240894 25
hose screw connection, see figure below Screw connection, IP66, straight, with metric thread, for protec-
tive hose outside diameter [mm]

10 black
13 black
15.8 black
21.2 black
28.5 black
34.5 black
42.5 black
Screw connection, IP69K, straight, with Pg thread, for protective
hose outside diameter [mm]
10 black
13 black
15.8 black
21.2 black
28.5 black
34.5 black
42.5 black
Screw connection, IP69K, straight, with metric thread, for protec-
tive hose outside diameter [mm]

10 black
13 black
15.8 black
21.2 black
28.5 black
34.5 black
42.5 black

Accessories
Counter nuts and seals see page 568 onwards

550 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Installation and mounting material - CABINET add-on
Cable routing, cable protection, cable bundling

IP66 degree of protection, IP69K degree of protection, Pg7 - Pg36 thread IP69K degree of protection,
M10 - M40 metric thread M10 - M40 metric thread

  

Technical data Technical data Technical data

PA PA PA
Free from silicone, halogen, and cadmium Free from silicone, halogen, and cadmium Free from silicone, halogen, and cadmium
IP66 IP68/IP69K IP68/IP69K
metric Pg metric
V0 V0 V0
-40 ... 115 -40 ... 115 -40 ... 115

Ordering data Ordering data Ordering data

Pcs. / Pcs. / Pcs. /

Type Order No. Type Order No. Type Order No.
Pkt. Pkt. Pkt.

WP-G HF IP66 M10 BK 3240895 50

WP-G HF IP66 M12 BK 3240896 50
WP-G HF IP66 M16 BK 3240897 50
WP-G HF IP66 M20 BK 3240898 50
WP-G HF IP66 M25 BK 3240899 25
WP-G HF IP66 M32 BK 3240900 25
WP-G HF IP66 M40 BK 3240901 25

WP-G HF IP69K PG7 BK 3240874 50

WP-G HF IP69K PG9 BK 3240875 50
WP-G HF IP69K PG11 BK 3240876 50
WP-G HF IP69K PG16 BK 3240877 50
WP-G HF IP69K PG21 BK 3240878 25
WP-G HF IP69K PG29 BK 3240879 25
WP-G HF IP69K PG36 BK 3240880 25

WP-G HF IP69K M10 BK 3240881 50

WP-G HF IP69K M12 BK 3240882 50
WP-G HF IP69K M16 BK 3240883 50
WP-G HF IP69K M20 BK 3240884 50
WP-G HF IP69K M25 BK 3240885 25
WP-G HF IP69K M32 BK 3240886 25
WP-G HF IP69K M40 BK 3240887 25

Accessories Accessories Accessories

see page 568 onwards see page 568 onwards see page 568 onwards

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 551

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Installation and mounting material - CABINET add-on
Cable routing, cable protection, cable bundling
Screw connections, angled, Notes:
for plastic protective hoses For accessories and dimensional drawings,
see www.phoenixcontact.net/products.

IP66 degree of protection, Pg7 - Pg36 thread



Technical data
General data
Material PA
The plastic screw connections with an- Components Free from silicone, halogen, and cadmium
gled design are available in IP66 and IP69K Degree of protection IP66
Thread type Pg
protection classes. They offer the following Inflammability class according to UL 94 HB
features: Temperature range [°C] -40 ... 115
– Vibration-resistant, automatic protective Ordering data
hose latching
Pcs. /
– Pg or metric thread Description Color Type Order No.
Pkt.
– Resistant to oil and gasoline Screw connection, IP66, 90° angled, with Pg thread,
– Resistant to acids and solvents for protective hose outside diameter [mm]
– Free from silicone, halogen, and cadmium 10 black WP-GA HF IP66 PG7 BK 3240916 50
13 black WP-GA HF IP66 PG9 BK 3240917 50
15.8 black WP-GA HF IP66 PG11 BK 3240918 50
Tool-free protective hose mounting 21.2 black WP-GA HF IP66 PG16 BK 3240919 50
– Secure, reliable, and easy latching in the 28.5 black WP-GA HF IP66 PG21 BK 3240920 25
34.5 black WP-GA HF IP66 PG29 BK 3240921 10
hose screw connection 42.5 black WP-GA HF IP66 PG36 BK 3240922 10
Screw connection, IP66, 90° angled, with metric thread,
for protective hose outside diameter [mm]

10 black
13 black
15.8 black
21.2 black
28.5 black
34.5 black
42.5 black
Screw connection, IP69K, 90° angled, with Pg thread,
for protective hose outside diameter [mm]

10 black
13 black
15.8 black
21.2 black
28.5 black
34.5 black
42.5 black
Screw connection, IP69K, 90° angled, with metric thread,
for protective hose outside diameter [mm]

10 black
13 black
15.8 black
21.2 black
28.5 black
34.5 black
42.5 black

Accessories
Counter nuts and seals see page 568 onwards

552 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Installation and mounting material - CABINET add-on
Cable routing, cable protection, cable bundling

IP66 degree of protection, IP69K degree of protection, Pg7 - Pg36 thread IP69K degree of protection,
M10 - M40 metric thread M10 - M40 metric thread

  

Technical data Technical data Technical data

PA PA PA
Free from silicone, halogen, and cadmium Free from silicone, halogen, and cadmium Free from silicone, halogen, and cadmium
IP66 IP68/IP69K IP68/IP69K
metric Pg metric
HB HB HB
-40 ... 115 -40 ... 115 -40 ... 115

Ordering data Ordering data Ordering data

Pcs. / Pcs. / Pcs. /

Type Order No. Type Order No. Type Order No.
Pkt. Pkt. Pkt.

WP-GA HF IP66 M10 BK 3240923 50

WP-GA HF IP66 M12 BK 3240924 50
WP-GA HF IP66 M16 BK 3240925 50
WP-GA HF IP66 M20 BK 3240926 50
WP-GA HF IP66 M25 BK 3240927 50
WP-GA HF IP66 M32 BK 3240928 25
WP-GA HF IP66 M40 BK 3240929 10

WP-GA HF IP69K PG7 BK 3240902 50

WP-GA HF IP69K PG9 BK 3240903 50
WP-GA HF IP69K PG11 BK 3240904 50
WP-GA HF IP69K PG16 BK 3240905 50
WP-GA HF IP69K PG21 BK 3240906 25
WP-GA HF IP69K PG29 BK 3240907 10
WP-GA HF IP69K PG36 BK 3240908 10

WP-GA HF IP69K M10 BK 3240909 50

WP-GA HF IP69K M12 BK 3240910 50
WP-GA HF IP69K M16 BK 3240911 50
WP-GA HF IP69K M20 BK 3240912 50
WP-GA HF IP69K M25 BK 3240913 25
WP-GA HF IP69K M32 BK 3240914 10
WP-GA HF IP69K M40 BK 3240915 10

Accessories Accessories Accessories

see page 568 onwards see page 568 onwards see page 568 onwards

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 553

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Installation and mounting material - CABINET add-on
Cable routing, cable protection, cable bundling
Screw connections with strain relief, Notes:
for plastic protective hoses For accessories and dimensional drawings,
see www.phoenixcontact.net/products.

IP66 degree of protection, Pg7 - Pg36 thread,

with strain relief



Technical data
General data
Material PA
The plastic screw connections with strain Components Free from silicone, halogen, and cadmium
relief are available in IP66 and IP69K protec- Degree of protection IP66
Thread type Pg
tion classes. Inflammability class according to UL 94 V0
They offer the following features: Temperature range [°C] -40 ... 115
– Vibration-resistant, automatic protective Ordering data
hose latching
Pcs. /
– Pg or metric thread Description Color Type Order No.
Pkt.
– Integrated cable strain relief Screw connection, IP66, straight, with Pg thread,
– Resistant to oil and gasoline for protective hose outside diameter [mm]
10 black WP-GR HF IP66 PG7 BK 3240944 20
– Resistant to acids and solvents 13 black WP-GR HF IP66 PG9 BK 3240945 20
– Free from silicone, halogen, and cadmium 15.8 black WP-GR HF IP66 PG11 BK 3240946 20
21.2 black WP-GR HF IP66 PG16 BK 3240947 10
28.5 black WP-GR HF IP66 PG21 BK 3240948 10
Tool-free protective hose mounting 34.5 black WP-GR HF IP66 PG29 BK 3240949 10
42.5 black WP-GR HF IP66 PG36 BK 3240950 10
– Secure, reliable, and easy latching in the Screw connection, IP66, straight, with metric thread,
hose screw connection for protective hose outside diameter [mm]

13 black
15.8 black
21.2 black
28.5 black
34.5 black
42.5 black
Screw connection, IP69K, straight, with Pg thread,
for protective hose outside diameter [mm]
10 black
13 black
15.8 black
21.2 black
28.5 black
34.5 black
42.5 black
Screw connection, IP69K, straight, with metric thread,
for protective hose outside diameter [mm]

13 black
15.8 black
21.2 black
28.5 black
34.5 black
42.5 black

Accessories
Counter nuts and seals see page 568 onwards

554 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Installation and mounting material - CABINET add-on
Cable routing, cable protection, cable bundling

IP66 degree of protection, M12 - M40 metric IP69K degree of protection, Pg7 - Pg36 thread, IP69K degree of protection, M12 - M40 metric
thread, with strain relief with strain relief thread, with strain relief

  

Technical data Technical data Technical data

PA PA PA
Free from silicone, halogen, and cadmium Free from silicone, halogen, and cadmium Free from silicone, halogen, and cadmium
IP66 IP68/IP69K IP68/IP69K
metric Pg metric
V0 V0 V0
-40 ... 115 -40 ... 115 -40 ... 115

Ordering data Ordering data Ordering data

Pcs. / Pcs. / Pcs. /

Type Order No. Type Order No. Type Order No.
Pkt. Pkt. Pkt.

WP-GR HF IP66 M12 BK 3240952 20

WP-GR HF IP66 M16 BK 3240953 20
WP-GR HF IP66 M20 BK 3240954 20
WP-GR HF IP66 M25 BK 3240955 10
WP-GR HF IP66 M32 BK 3240956 10
WP-GR HF IP66 M40 BK 3240957 10

WP-GR HF IP69K PG7 BK 3240930 20

WP-GR HF IP69K PG9 BK 3240931 20
WP-GR HF IP69K PG11 BK 3240932 20
WP-GR HF IP69K PG16 BK 3240933 10
WP-GR HF IP69K PG21 BK 3240934 10
WP-GR HF IP69K PG29 BK 3240935 10
WP-GR HF IP69K PG36 BK 3240936 10

WP-GR HF IP69K M12 BK 3240938 20

WP-GR HF IP69K M16 BK 3240939 20
WP-GR HF IP69K M20 BK 3240940 20
WP-GR HF IP69K M25 BK 3240941 10
WP-GR HF IP69K M32 BK 3240942 10
WP-GR HF IP69K M40 BK 3240943 10

Accessories Accessories Accessories

see page 568 onwards see page 568 onwards see page 568 onwards

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 555

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Installation and mounting material - CABINET add-on
Cable routing, cable protection, cable bundling
Protective hoses Notes:
with PVC- or PU-coated spirals Pcs. / Pkt. specifies the protective hose length in [m].

Protective hose, PVC coated spiral,

outside diameter of 10 - 45 mm

Technical data
General data
Material PVC
The WP-SPIRAL PVC C ... plastic Components Free from silicone and cadmium
protective hoses with soft PVC-coated Inflammability class according to UL 94 -
Temperature range [°C] -25 ... 80
spring wire helix offer optimum protection,
thanks to the following properties: Ordering data
– Highly flexible Description Color Type Order No.
Pcs. /
– Can be stretched and compressed Pkt.

– Internal corrosion protection Protective hose, PVC-coated spiral

Diameter [mm] Bending radius [mm]
– Largely resistant to acids and solvents Outside/inside static
– Free from silicone and cadmium 10 / 7 8 gray WP-SPIRAL PVC C 10 3240849 10
14 / 10 10 gray WP-SPIRAL PVC C 14 3240850 10
– Airtight and liquid tight 17 / 13 13 gray WP-SPIRAL PVC C 17 3240851 10
21 / 16 17 gray WP-SPIRAL PVC C 21 3240852 10
The WP-SPIRAL PU C ... plastic 27 / 22 20 gray WP-SPIRAL PVC C 27 3240853 10
36 / 29 24 gray WP-SPIRAL PVC C 36 3240854 10
protective hoses with fixed, PU-coated 45 / 38 36 gray WP-SPIRAL PVC C 45 3240855 10
spring wire helix offer the following: Protective hose, PU-coated spiral
– Very tough and resistant to abrasion Diameter [mm]
Outside/inside
Bending radius [mm]
static
– Highly flexible 10 / 7 8 blue
– Resistant to germs 14 / 10 10 blue
17 / 13 13 blue
– Airtight and liquid tight 21 / 16 17 blue
– Resistant to oil and grease 27 / 22 20 blue
– Gasoline-resistant 36 / 29 24 blue
45 / 38 36 blue
– Largely resistant to acids and solvents End sleeves
– Free from silicone, halogen, and cadmium Diameter [mm] Cable diameter
Outside/inside [mm]
– Flame-protected 10 / 7 6 gray
– Behaves extremely well at low tempera- 14 / 10 9 gray
tures 17 / 13 11.5 gray
21 / 16 14.5 gray
– V2 according to UL 94 27 / 21 19.5 gray
– Suitable as a suction tube 36 / 29 26.5 gray
45 / 38 36 gray
The covered protective hoses are
particularly suitable for the following fields
of application:
– Machine and system engineering
– Vehicle construction
– Use in guide chains
– Shipbuilding
– Automation
– Electrical systems

556 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Installation and mounting material - CABINET add-on
Cable routing, cable protection, cable bundling

Protective hose, PU coated spiral, End sleeve for protective hose

outside diameter of 10 - 45 mm diameter of 10 - 45 mm

Technical data Technical data

PU PP
Free from silicone, halogen, and cadmium Halogen-free
V2 HB
-40 ... 80 -10 ... 110

Ordering data Ordering data

Pcs. / Pcs. /
Type Order No. Type Order No.
Pkt. Pkt.

WP-SPIRAL PU C HF 10 3240856 10
WP-SPIRAL PU C HF 14 3240857 10
WP-SPIRAL PU C HF 17 3240858 10
WP-SPIRAL PU C HF 21 3240859 10
WP-SPIRAL PU C HF 27 3240860 10
WP-SPIRAL PU C HF 36 3240861 10
WP-SPIRAL PU C HF 45 3240862 10

WP-SC HF 10 3241016 50
WP-SC HF 14 3241017 50
WP-SC HF 17 3241018 50
WP-SC HF 21 3241019 50
WP-SC HF 27 3241020 25
WP-SC HF 36 3241021 25
WP-SC HF 45 3241022 20

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 557

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Installation and mounting material - CABINET add-on
Cable routing, cable protection, cable bundling
Screw connections, for protective
hoses with coated spirals

IP65 degree of protection, Pg7 - Pg36 thread

Technical data
General data
Material PP
The polypropylene screw connections Degree of protection IP65
with a straight design are available with or Thread type Pg
Components Halogen-free
without a rotatable connecting thread. Inflammability class according to UL 94 HB
– Easy, tool-free mounting Temperature range [°C] -10 ... 110
– High resistance to dust and fluids Ordering data
– Vibration resistance and high tensile
Pcs. /
strength, thanks to hose screw-out Description Color Type Order No.
Pkt.
locking Screw connection, IP65, straight, with Pg thread

Outside diameter of protec- Cable diameter

Rotatable screw connections tive hose [mm] [mm]

– The protective hose can still be rotated 10 6 gray WP-G PP HF PG7 3240988 10
after panel mounting, thanks to the 14 9 gray WP-G PP HF PG9 3240989 10
17 11 gray WP-G PP HF PG11 3240990 10
special screw connections 21 14.5 gray WP-G PP HF PG16 3240991 10
27 19.5 gray WP-G PP HF PG21 3240992 10
36 27 gray WP-G PP HF PG29 3240993 2
45 36 gray WP-G PP HF PG36 3240994 2
Screw connection, IP65, straight, with metric thread

Outside diameter of protec- Cable diameter

tive hose [mm] [mm]

10 6 gray
14 8 gray
17 11 gray
21 15 gray
27 20 gray
36 27 gray
45 35 gray
Screw connection, IP54, rotatable, with Pg thread

Outside diameter of protec- Cable diameter

tive hose [mm] [mm]

10 5.5 gray
14 9.5 gray
17 11.5 gray
21 14.5 gray
27 19.5 gray
36 27 gray
45 35.5 gray
Screw connection, IP54, rotatable, with metric thread

Outside diameter of protec- Cable diameter

tive hose [mm] [mm]

10 5.5 gray
14 9.5 gray
17 11.5 gray
21 14.5 gray
27 19.5 gray
36 27 gray

Accessories
Counter nuts and seals see page 568 onwards

558 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Installation and mounting material - CABINET add-on
Cable routing, cable protection, cable bundling

IP65 degree of protection, M10 - M40 metric IP54 degree of protection, Pg7 - Pg36 thread, IP54 degree of protection, M12 - M40 metric
thread rotatable thread, rotatable

  

Technical data Technical data Technical data

PP PP PP
IP65 IP54 IP54
metric Pg metric
Halogen-free Halogen-free Halogen-free
HB HB HB
-10 ... 110 -10 ... 110 -10 ... 110

Ordering data Ordering data Ordering data

Pcs. / Pcs. / Pcs. /

Type Order No. Type Order No. Type Order No.
Pkt. Pkt. Pkt.

WP-G PP HF M10 3240995 10

WP-G PP HF M12 3240996 10
WP-G PP HF M16 3240997 10
WP-G PP HF M20 3240998 10
WP-G PP HF M25 3240999 10
WP-G PP HF M32 3241000 2
WP-G PP HF M40 3241001 2

WP-GT PP HF PG7 3241002 10

WP-GT PP HF PG9 3241003 10
WP-GT PP HF PG11 3241004 10
WP-GT PP HF PG16 3241005 10
WP-GT PP HF PG21 3241006 10
WP-GT PP HF PG29 3241007 2
WP-GT PP HF PG36 3241008 2

WP-GT PP HF M12 3241010 10

WP-GT PP HF M16 3241011 10
WP-GT PP HF M20 3241012 10
WP-GT PP HF M25 3241013 10
WP-GT PP HF M32 3241014 10
WP-GT PP HF M40 3241015 2

Accessories Accessories Accessories

see page 568 onwards see page 568 onwards see page 568 onwards

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 559

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Installation and mounting material - CABINET add-on
Cable routing, cable protection, cable bundling
Protective hoses made of steel or Notes:
stainless steel Pcs. / Pkt. specifies the protective hose length in [m].

Stainless steel protective hose,

outside diameter of 10 - 45 mm

Technical data
General data
Material Steel, galvanized
The metal protective hoses made of gal- Temperature range [°C] -200 ... 220
vanized steel or stainless steel offer opti- Ordering data
mum protection and have a wide range of
Pcs. /
uses, thanks to the following properties: Description Color Type Order No.
Pkt.
– Interlocked, helix-wound profile Protective hose
– Highly flexible Diameter [mm] Bending radius [mm]
– High tensile strength and resistance to Outside/inside static
10 / 8 28 silver WP-STEEL ZC 10 3240697 10
lateral pressure 14 / 11 34 silver WP-STEEL ZC 14 3240865 10
These properties make the products suit- 17 / 14 40 silver WP-STEEL ZC 17 3240698 10
21 / 18 50 silver WP-STEEL ZC 21 3240699 10
able for use in the following areas: 27 / 23 63 silver WP-STEEL ZC 27 3240866 10
– Machine and system engineering 36 / 31 85 silver WP-STEEL ZC 36 3240700 10
– Vehicle construction 45 / 40 100 silver WP-STEEL ZC 45 3240701 10
Protective hose
– Ex area according to EN 60079-14 and Diameter [mm] Bending radius [mm]
EN 61241-14 Outside/inside static
10 / 8 22 silver
– Shipbuilding 14 / 11 25 silver
– Rail vehicles 17 / 14 40 silver
– Automation 21 / 18 50 silver
27 / 23 63 silver
– Electrical systems 36 / 31 85 silver
45 / 40 100 silver
End sleeves
Outside diameter of hose Cable diameter
[mm] [mm]
10 6.5 Brass
14 10 Brass
17 12.5 Brass
21 16.5 Brass
27 21.5 Brass
36 29.5 Brass
45 38 Brass

560 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Installation and mounting material - CABINET add-on
Cable routing, cable protection, cable bundling

Stainless steel protective hose (V2A), End sleeve for protective hose
outside diameter of 10 - 45 mm diameter of 10 - 45 mm

Technical data Technical data

Stainless steel 1.4301/AISI 304 Brass

-200 ... 600 -40 ... 250

Ordering data Ordering data

Pcs. / Pcs. /
Type Order No. Type Order No.
Pkt. Pkt.

WP-STEEL S 10 3240686 10
WP-STEEL S 14 3240687 10
WP-STEEL S 17 3240863 10
WP-STEEL S 21 3240688 10
WP-STEEL S 27 3240864 10
WP-STEEL S 36 3240689 10
WP-STEEL S 45 3240690 10

WP-SC BRASS 10 3241065 50

WP-SC BRASS 14 3241066 50
WP-SC BRASS 17 3241067 50
WP-SC BRASS 21 3241068 50
WP-SC BRASS 27 3241069 25
WP-SC BRASS 36 3241070 25
WP-SC BRASS 45 3241071 20

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 561

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Installation and mounting material - CABINET add-on
Cable routing, cable protection, cable bundling
Screw connections, for protective Notes:
hoses made of steel or stainless steel Inner sleeves and seals are supplied as standard.

IP40 degree of protection, Pg7 - Pg36 thread

Technical data
General data
Material Brass
The screw connections are available with Degree of protection IP40
or without a rotatable connecting thread Thread type Pg
Temperature range [°C] -40 ... 125
and have the following properties:
– Easy mounting of protective hose without Ordering data
tools Description Color Type Order No.
Pcs. /
– Vibration resistance and high tensile Pkt.

strength, thanks to hose screw-out Screw connection, IP40, with Pg thread

Outside diameter of protec- Cable diameter
locking tive hose [mm] [mm]
– Integrated inner sleeve and rotation lock
10 6.5 Brass WP-G BRASS IP40 PG7 3241037 10
for hose 14 10 Brass WP-G BRASS IP40 PG9 3241038 10
17 12.5 Brass WP-G BRASS IP40 PG11 3241039 10
21 16 Brass WP-G BRASS IP40 PG16 3241040 10
Rotatable screw connections 27 21.5 Brass WP-G BRASS IP40 PG21 3241041 10
– The protective hose can still be rotated 36 29 Brass WP-G BRASS IP40 PG29 3241042 2
45 38 Brass WP-G BRASS IP40 PG36 3241043 2
after panel mounting, thanks to the Screw connection, IP40, with metric thread
special screw connections
Outside diameter of protec- Cable diameter
tive hose [mm] [mm]

10 6.5 Brass
14 10 Brass
17 12.5 Brass
21 16 Brass
27 21.5 Brass
36 27.5 Brass
45 35 Brass
Screw connection, IP40, rotatable, with Pg thread

Outside diameter of protec- Cable diameter

tive hose [mm] [mm]

10 6 Brass
14 9 Brass
17 12 Brass
21 15.5 Brass
27 20.5 Brass
36 27.5 Brass
45 36.5 Brass
Screw connection, IP40, rotatable, with metric thread

Outside diameter of protec- Cable diameter

tive hose [mm] [mm]

10 6 Brass
14 9 Brass
17 12 Brass
21 15.5 Brass
27 20.5 Brass
36 27.5 Brass
45 35 Brass

562 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Installation and mounting material - CABINET add-on
Cable routing, cable protection, cable bundling

IP40 degree of protection, IP40 degree of protection, IP40 degree of protection,

M10 - M40 metric thread Pg7 - Pg36 thread, rotatable M10 - M40 metric thread, rotatable

  

Technical data Technical data Technical data

Brass Brass Brass

IP40 IP40 IP40
metric Pg metric
-40 ... 125 -40 ... 250 -40 ... 250

Ordering data Ordering data Ordering data

Pcs. / Pcs. / Pcs. /

Type Order No. Type Order No. Type Order No.
Pkt. Pkt. Pkt.

WP-G BRASS IP40 M10 3241044 10

WP-G BRASS IP40 M12 3241045 10
WP-G BRASS IP40 M16 3241046 10
WP-G BRASS IP40 M20 3241047 10
WP-G BRASS IP40 M25 3241048 10
WP-G BRASS IP40 M32 3241049 2
WP-G BRASS IP40 M40 3241050 2

WP-GT BRASS PG7 3241023 10

WP-GT BRASS PG9 3241024 10
WP-GT BRASS PG11 3241025 10
WP-GT BRASS PG16 3241026 10
WP-GT BRASS PG21 3241027 10
WP-GT BRASS PG29 3241028 2
WP-GT BRASS PG36 3241029 2

WP-GT BRASS M10 3241030 10

WP-GT BRASS M12 3241031 10
WP-GT BRASS M16 3241032 10
WP-GT BRASS M20 3241033 10
WP-GT BRASS M25 3241034 10
WP-GT BRASS M32 3241035 2
WP-GT BRASS M40 3241036 2

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 563

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Installation and mounting material - CABINET add-on
Cable routing, cable protection, cable bundling
Protective hoses made of steel with
PVC coating and screw connections

– Optimum protection
– Numerous possible applications
– Tool-free assembly of screw connection
and protective hose
– Screw connection for high resistance
Notes:
Pcs. / Pkt. specifies the protective hose length in [m].
Inner sleeves and seals are supplied as standard.

Stainless steel protective hose (V2A), IP65 degree of protection, Pg7 - Pg36 thread
PVC-coated, outside diameter of 10 - 45 mm and M10 - M40 metric thread

 

Technical data Technical data

General data
Material Steel, galvanized/PVC Brass
Degree of protection - IP65
Thread type - Pg
Temperature range [°C] -25 ... 80 -40 ... 125

Ordering data Ordering data

Pcs. / Pcs. /
Description Color Type Order No. Type Order No.
Pkt. Pkt.
Protective hose, in galvanized steel, PVC-coated

Diameter [mm] Bending radius [mm]

Outside/inside static
10 / 7 95 black WP-STEEL PVC C 10 3240867 10
14 / 10 105 black WP-STEEL PVC C 14 3240868 10
17 / 13 115 black WP-STEEL PVC C 17 3240869 10
21 / 17 110 black WP-STEEL PVC C 21 3240870 10
27 / 22 135 black WP-STEEL PVC C 27 3240871 10
36 / 29 145 black WP-STEEL PVC C 36 3240872 10
45 / 38 215 black WP-STEEL PVC C 45 3240873 10
End sleeves, in brass
Outside diameter of hose Cable diameter
[mm] [mm]
10 6 Brass WP-SC BRASS WP PVC 10 3241072 50
14 8.5 Brass WP-SC BRASS WP PVC 14 3241073 50
17 11.5 Brass WP-SC BRASS WP PVC 17 3241074 50
21 15.5 Brass WP-SC BRASS WP PVC 21 3241075 50
27 20.5 Brass WP-SC BRASS WP PVC 27 3241076 25
36 27.5 Brass WP-SC BRASS WP PVC 36 3241077 25
45 36.5 Brass WP-SC BRASS WP PVC 45 3241078 20
Screw connection, IP65, with Pg thread
Outside diameter of protec- Cable diameter
tive hose [mm] [mm]

10 6 Brass WP-G BRASS IP65 PG7 3241051 10

14 8.5 Brass WP-G BRASS IP65 PG9 3241052 10
17 11.5 Brass WP-G BRASS IP65 PG11 3241053 10
21 15.5 Brass WP-G BRASS IP65 PG16 3241054 10
27 20.5 Brass WP-G BRASS IP65 PG21 3241055 10
36 27.5 Brass WP-G BRASS IP65 PG29 3241056 2
45 35 Brass WP-G BRASS IP65 PG36 3241057 2
Screw connection, IP65, with metric thread

Outside diameter of protec- Cable diameter

tive hose [mm] [mm]

10 6 Brass WP-G BRASS IP65 M10 3241058 10

14 8.5 Brass WP-G BRASS IP65 M12 3241059 10
17 11.5 Brass WP-G BRASS IP65 M16 3241060 10
21 15.5 Brass WP-G BRASS IP65 M20 3241061 10
27 20.5 Brass WP-G BRASS IP65 M25 3241062 10
36 27.5 Brass WP-G BRASS IP65 M32 3241063 2
45 35 Brass WP-G BRASS IP65 M40 3241064 2

564 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Installation and mounting material - CABINET add-on
Cable routing, cable protection, cable bundling
Spiral hoses Notes:
Pcs. / Pkt. indicates the spiral hose length in [m].

Spiral hose,
for bundle diameters of 2 mm - 150 mm

Technical data
General data
Material PE
Easy bundling and routing of cables and Components free from silicone and halogen
conductors Inflammability class according to UL 94 HB
Temperature range [°C] -50 ... 85
– Fast and easy to use
– Can be retrofitted Ordering data
– The spiral structure means that individual Description Color Type Order No.
Pcs. /
conductors and cables can be led out at Pkt.

any point Spiral hose, for bundle diameters

2 - 15 mm transparent WG-S HF 15 3241109 50
– Offer protection under light mechanical 4 - 20 mm transparent WG-S HF 20 3241111 25
strain 7 - 40 mm transparent WG-S HF 40 3241113 25
12 - 50 mm transparent WG-S HF 50 3241115 25
13 - 70 mm transparent WG-S HF 70 3241117 25
15 - 80 mm transparent WG-S HF 80 3241119 20
20 - 120 mm transparent WG-S HF 120 3241121 25
25 - 150 mm transparent WG-S HF 150 3241123 20
Spiral hose, for bundle diameters
2 - 15 mm black WG-S HF 15 BK 3241110 50
4 - 20 mm black WG-S HF 20 BK 3241112 25
7 - 40 mm black WG-S HF 40 BK 3241114 25
12 - 50 mm black WG-S HF 50 BK 3241116 25
13 - 70 mm black WG-S HF 70 BK 3241118 25
15 - 80 mm black WG-S HF 80 BK 3241120 20
20 - 120 mm black WG-S HF 120 BK 3241122 25
25 - 150 mm black WG-S HF 150 BK 3241124 20

Accessories
Electrician's scissors, high cutting performance thanks to micro-
serrated cutting area, suitable for copper, aluminum, Kevlar fibers,
and plastic, two-component non-slip soft-grip handles, ergonomic
design, adjustable screw joint

CUTFOX-ES 1212621 1

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 565

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Installation and mounting material - CABINET add-on
Cable routing, cable protection, cable bundling
Accessories for protective hose
mounting

The WP-BASE C... protective hose

holders with cover can be attached using a
screw.
– An integrated rib fastening also helps to
relieve the strain on the protective hose
– The base of the holder is designed so that
it can even be pushed onto a C DIN rail
– The engagement pins enable hose holders
of different sizes to be arranged alongside
each other Protective hose with cover

WP-BASE HF... protective hose clips:

– Galvanized steel locking latch with rubber

profile
– Screw mounting Technical data
General data
WP-BASE ... fixing bracket: Material PA
– With two mounting holes according to Ordering data
DIN 46320
– Protective hose feed-through can be at- Description Color Type Order No.
Pcs. /
Pkt.
tached to the side of the panel Protective hose holder with cover, screwable, made of plastic
– Pg or metric protective hose screw con-
nections can be mounted on a bracket Outside diameter of protec-
tive hose [mm]
Hole diameter [mm]

10 10 black WP-BASE C PA HF 10,0 BK 3240958 50

13 13 black WP-BASE C PA HF 13,0 BK 3240959 50
15.8 15.8 black WP-BASE C PA HF 15,8 BK 3240960 50
21.2 21.2 black WP-BASE C PA HF 21,2 BK 3240961 50
28.5 28.2 black WP-BASE C PA HF 28,2 BK 3240962 25
34.5 34.5 black WP-BASE C PA HF 34,5 BK 3240963 25
42.5 42.5 black WP-BASE C PA HF 42,5 BK 3240964 25
Protective hose clip, screwable
Outside diameter of protec- Hole diameter [mm]
tive hose [mm]

10 10 silver/black
13 13 silver/black
14 14 silver/black
15.8 15.8 silver/black
17 17 silver/black
22 22 silver/black
29 29 silver/black
36 37 silver/black
45 45 silver/black
Fixing bracket, screwable
Screw connection Hole diameter [mm]

Pg16 23 silver
Pg21 29 silver
Pg29 37.5 silver
Pg36 47.5 silver
Fixing bracket, screwable
Screw connection Hole diameter [mm]

M16 17 silver
M20 21 silver
M25 26 silver
M32 33 silver
M40 43 silver

566 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Installation and mounting material - CABINET add-on
Cable routing, cable protection, cable bundling

Protective hose clip Fixing bracket, screw version, Fixing bracket, screw version, for metric
for Pg screw connection screw connection

Technical data Technical data Technical data

Steel, galvanized Steel, galvanized Steel, galvanized

Ordering data Ordering data Ordering data

Pcs. / Pcs. / Pcs. /

Type Order No. Type Order No. Type Order No.
Pkt. Pkt. Pkt.

WP-BASE HF 9-10 3240965 50

WP-BASE HF 13 3240966 50
WP-BASE HF 14 3240967 50
WP-BASE HF 15,8 3240968 50
WP-BASE HF 17 3240969 50
WP-BASE HF 22 3240970 50
WP-BASE HF 29 3240971 50
WP-BASE HF 37 3240972 50
WP-BASE HF 45 3240973 25

WP-BASE A PG16 3241079 25

WP-BASE A PG21 3241080 25
WP-BASE A PG29 3241081 25
WP-BASE A PG36 3241082 25

WP-BASE A M16 3241083 25

WP-BASE A M20 3241084 25
WP-BASE A M25 3241085 25
WP-BASE A M32 3241086 25
WP-BASE A M40 3241087 25

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 567

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Installation and mounting material - CABINET add-on
Cable routing, cable protection, cable bundling
Accessories for protective hose
mounting

Counter nut, M12 - M40, plastic

Technical data
General data
Material Polyamide fiberglass reinforced
WP-CN ...
Ordering data
The counter nuts are used to lock protec-
tive hose screw connections in the case of Description Color Type Order No.
Pcs. /
Pkt.
bore holes without a thread.
Counter nut, plastic, for protective hose screw connections
– Counter nuts made of brass or plastic with metric thread
– The fiberglass-reinforced polyamide en- for M12 gray WP-CN PA M12 3241132 100
sures a high degree of mechanical stability for M16 gray WP-CN PA M16 3241133 100
for M20 gray WP-CN PA M20 3241134 100
– Metric thread according to EN 50262, for M25 gray WP-CN PA M25 3241135 100
making the counter nut suitable for uni- for M32 gray WP-CN PA M32 3241136 100
for M40 gray WP-CN PA M40 3241137 50
versal use Counter nut, plastic, for
protective hose screw connections with Pg thread
for Pg7 gray
for Pg9 gray
for Pg11 gray
for Pg16 gray
for Pg21 gray
for Pg29 gray
for Pg36 gray
Counter nut, nickel-plated brass,
for protective hose screw connections with metric thread
for M10 silver
for M12 silver
for M16 silver
for M20 silver
for M25 silver
for M32 silver
for M40 silver
Counter nut, nickel-plated brass,
for protective hose screw connections with Pg thread
for Pg7 silver
for Pg9 silver
for Pg11 silver
for Pg16 silver
for Pg21 silver
for Pg29 silver
for Pg36 silver

568 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Installation and mounting material - CABINET add-on
Cable routing, cable protection, cable bundling

Counter nut, Pg7 - Pg36, plastic Counter nut, M10 - M40, brass Counter nut, Pg7 - Pg36, brass

Technical data Technical data Technical data

Polyamide fiberglass reinforced Nickel-plated brass Nickel-plated brass

Ordering data Ordering data Ordering data

Pcs. / Pcs. / Pcs. /

Type Order No. Type Order No. Type Order No.
Pkt. Pkt. Pkt.

WP-CN PA PG7 3241138 100

WP-CN PA PG9 3241139 100
WP-CN PA PG11 3241140 100
WP-CN PA PG16 3241141 100
WP-CN PA PG21 3241142 100
WP-CN PA PG29 3241143 100
WP-CN PA PG36 3241144 50

WP-CN BRASS M10 3241145 100

WP-CN BRASS M12 3241146 100
WP-CN BRASS M16 3241147 100
WP-CN BRASS M20 3241148 100
WP-CN BRASS M25 3241149 100
WP-CN BRASS M32 3241150 100
WP-CN BRASS M40 3241151 50

WP-CN BRASS PG7 3241152 100

WP-CN BRASS PG9 3241153 100
WP-CN BRASS PG11 3241154 100
WP-CN BRASS PG16 3241155 100
WP-CN BRASS PG21 3241156 100
WP-CN BRASS PG29 3241157 100
WP-CN BRASS PG36 3241158 50

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 569

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Installation and mounting material - CABINET add-on
Cable routing, cable protection, cable bundling
Accessories for protective hose
mounting

Flat gasket made from Perbunan

Technical data
General data
Material Perbunan
WP-FS ...
Ordering data
The Perbunan flat sealing rings are used to
seal protective hose screw connections on Description Color Type Order No.
Pcs. /
Pkt.
uneven surfaces. They are inserted between
Flat gasket, Perbunan, for protective hose screw connections
the hose screw connection and the surface, with metric thread
thereby achieving degrees of protection up for M10 black WP-FS IP68 M10 3241159 50
to IP68. for M12 black WP-FS IP68 M12 3241160 50
for M16 black WP-FS IP68 M16 3241161 50
for M20 black WP-FS IP68 M20 3241162 50
for M25 black WP-FS IP68 M25 3241163 50
WP-FS HF... for M32 black WP-FS IP68 M32 3241164 25
The Centellen flat sealing rings also pro- for M40 black WP-FS IP68 M40 3241165 25
Flat gasket, Perbunan, for protective hose screw connections
vide an optimum seal on uneven surfaces. with Pg thread
As well as having IP68 protection and high for Pg7 black WP-FS IP68 PG7 3241166 50
mechanical stability, the sealing rings are for Pg9 black WP-FS IP68 PG9 3241167 50
for Pg11 black WP-FS IP68 PG11 3241168 50
also UV resistant and halogen-free. This en- for Pg16 black WP-FS IP68 PG16 3241169 50
ables them to be used outdoors. Properties: for Pg21 black WP-FS IP68 PG21 3241170 25
for Pg29 black WP-FS IP68 PG29 3241171 25
– Resistant to oil, seal against dust and wa- for Pg36 black WP-FS IP68 PG36 3241172 25
ter, UV resistant, halogen-free, high me- Flat gasket, Centellen, for protective hose screw connections
chanical stability with metric thread
for M10 green
for M12 green
for M16 green
WP-OR... for M20 green
The properties of the Perbunan O-rings, for M25 green
for M32 green
such as their resistance to oil and seal for M40 green
against water and dust, mean that they can Flat gasket, Centellen, for protective hose screw connections
be used in a wide range of applications. with Pg thread
for Pg7 green
for Pg9 green
for Pg11 green
for Pg16 green
for Pg21 green
for Pg29 green
for Pg36 green
O-ring, Perbunan, for protective hose screw connections with
metric thread
for M10 black
for M12 black
for M16 black
for M20 black
for M25 black
for M32 black
for M40 black
O-ring, Perbunan, for protective hose screw connections with Pg
thread
for Pg7 black
for Pg9 black
for Pg11 black
for Pg16 black
for Pg21 black
for Pg29 black
for Pg36 black

570 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Installation and mounting material - CABINET add-on
Cable routing, cable protection, cable bundling

Flat gasket made from Centellen O-ring made from Perbunan

Technical data Technical data

Centellen Perbunan

Ordering data Ordering data

Pcs. / Pcs. /
Type Order No. Type Order No.
Pkt. Pkt.

WP-FS HF IP68 M10 3241173 50

WP-FS HF IP68 M12 3241174 50
WP-FS HF IP68 M16 3241175 50
WP-FS HF IP68 M20 3241176 50
WP-FS HF IP68 M25 3241177 50
WP-FS HF IP68 M32 3241178 25
WP-FS HF IP68 M40 3241179 25

WP-FS HF IP68 PG7 3241180 50

WP-FS HF IP68 PG9 3241181 50
WP-FS HF IP68 PG11 3241182 50
WP-FS HF IP68 PG16 3241183 50
WP-FS HF IP68 PG21 3241184 25
WP-FS HF IP68 PG29 3241185 25
WP-FS HF IP68 PG36 3241186 25

WP-OR M10 3241187 50

WP-OR M12 3241188 50
WP-OR M16 3241189 50
WP-OR M20 3241190 50
WP-OR M25 3241191 50
WP-OR M32 3241192 25
WP-OR M40 3241193 25

WP-OR PG7 3241194 50

WP-OR PG9 3241195 50
WP-OR PG11 3241196 50
WP-OR PG16 3241197 50
WP-OR PG21 3241198 25
WP-OR PG29 3241199 25
WP-OR PG36 3241200 25

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 571

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Installation and mounting material - CABINET add-on
Cable routing, cable protection, cable bundling
Plastic cable marker for insert labels, Notes:
for assembly with cable binders For corresponding cable binders, see page 574 onwards.

For insert labels measuring 29 x 8 mm

Technical data
General data
Material Polyethylene
– Plastic cable markers for marking and Temperature range [°C] -40 ... 80
bundling multiple conductors and cables Components free from silicone and halogen

indoors Ordering data

– The printed insert label is protected from Pcs. /
dirt by the sealing cap Description Color Type Order No.
Pkt.
– Labeling service: Phoenix Contact can Plastic cable markers for insert labels, with cable binders with a
custom-label all insert labels for plastic pointed end, can be labeled with ESL..., EMT... or US-EMP... insert
labels, diameter: 10 ... 25 mm, lettering field size: 29 x 8 mm
cable markers in accordance with your
requirements
transparent KMK 1005208 100
Plastic cable markers for insert labels, with cable binders with a
pointed end, can be labeled with ESL..., EMT... or US-EMP... insert
labels, diameter: 16 ... 35 mm, lettering field size: 40 x 17 mm

transparent
Cable and conductor markers for insert labels, can be labeled
with EST or ESL, diameter of 1 - 12 mm,
lettering field size: 24 x 4 mm

white
Cable and conductor markers for labels,
lettering field size: 20 x 8 mm

white

Accessories
Insert strips for laser printers, DIN A4, perforated

Lettering field size: 29 x 8 mm, 1 sheet = 174 labels ESL 29X 8 0808257 10

Lettering field size: 40 x 17 mm, 1 sheet = 56 labels

Lettering field size: 24 x 4 mm, 1 sheet = 488 labels

Insert labels for thermal transfer printers

Lettering field size: 29 x 8 mm, 5400 labels p. roll EMT (29X8)R 0817277 1

Lettering field size: 40 x 17 mm, 2300 labels p. roll

Lettering field size: 24 x 4 mm, 5000 labels p. roll

UniSheet, 0.5 mm thick

48-section, lettering field size: 29 x 8 mm US-EMP (29X8) 0829436 10
16-section, lettering field size: 40 x 17 mm
Textile label, lettering field size: 20 x 8 mm
2500 labels p. roll
2500 labels p. roll

572 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Installation and mounting material - CABINET add-on
Cable routing, cable protection, cable bundling

For insert labels measuring 40 x 17 mm For insert labels, 12 mm conductor diameter For adhesive labels,
conductor diameter of up to 20 mm

Technical data Technical data Technical data

Polyethylene PA PA
-40 ... 80 -40 ... 100 -40 ... 100
free from silicone and halogen free from silicone and halogen free from silicone and halogen

Ordering data Ordering data Ordering data

Pcs. / Pcs. / Pcs. /

Type Order No. Type Order No. Type Order No.
Pkt. Pkt. Pkt.

KMK 3 1005211 50

LM 1004377 100

KME 0807083 50

Accessories Accessories Accessories

ESL 40X17 0808095 10

ESL 24X 4 0808231 10

EMT (40X17)R 0817293 1

EMT (24X4)R 0816265 1

US-EMP (40X17) 0829437 10

EMLC (20X8)R 0815680 1

EML (20X8)R 0816786 1

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 573

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Installation and mounting material - CABINET add-on
Cable routing, cable protection, cable bundling
Plastic cable binders

Cable tie length of 98 - 1000 mm



Technical data
General data
Material PA 6.6
– For bundling and fastening conductors Components free from silicone and halogen
and cables Inflammability class according to UL 94 V2
Temperature range [°C] -40 ... 85
– Can be used indoors and outdoors even
under unfavorable industrial conditions Ordering data
– With the UNIFOX-CT ... cable binder Description Color Type Order No.
Pcs. /
tool, the cable binders can be easily Pkt.

tightened and cut off flush in one step Cable binder, maximum bundle Ø [mm]/minimum tensile strength
[N]
– Cable binders are easy to use, thanks to 21 / 80 transparent WT-HF 2,5X98 3240732 100
their optimized geometries 40 / 80 transparent WT-HF 2,6X160 3240736 100
52 / 80 transparent WT-HF 2,6X200 3240740 100
– Optimum head shape for high tensile 35 / 130 transparent WT-HF 3,6X140 3240744 100
forces 50 / 130 transparent WT-HF 3,6X200 3240748 100
– Temperature range: briefly up to 110°C 80 / 130 transparent WT-HF 3,6X290 3240752 100
40 / 220 transparent WT-HF 4,5X160 3240756 100
– Comprehensive approvals 50 / 220 transparent WT-HF 4,5X200 3240760 100
– Designation example:  79 / 220 transparent WT-HF 4,5X290 3240764 100
WT-HF 2,5X98 100 / 220 transparent WT-HF 4,5X360 3240768 100
115 / 220 transparent WT-HF 4,5X430 3240770 100
Cable binder width: 2.5 mm 80 / 540 transparent WT-HF 7,8X300 3240772 100
Cable binder length: 98 mm 100 / 540 transparent WT-HF 7,8X365 3240774 100
158 / 540 transparent WT-HF 7,8X540 3240719 100
233 / 700 transparent WT-HF 9X780 3240778 100
143 / 1080 transparent WT-HF 12,6X850 3240730 50
302 / 1080 transparent WT-HF 12,6X1000 3240728 50
Cable binder, large pack, maximum bundle Ø [mm]/minimum
tensile strength [N]
21 / 80 transparent WT-HF 2,5X98-L 3240735 1000
40 / 80 transparent WT-HF 2,6X160-L 3240739 1000
52 / 80 transparent WT-HF 2,6X200-L 3240743 1000
35 / 130 transparent WT-HF 3,6X140-L 3240747 1000
50 / 130 transparent WT-HF 3,6X200-L 3240751 1000
80 / 130 transparent WT-HF 3,6X290-L 3240755 500
40 / 220 transparent WT-HF 4,5X160-L 3240759 1000
50 / 220 transparent WT-HF 4,5X200-L 3240763 1000

Accessories
Cable binder pliers, for plastic cable binders with a
width of 2.2 - 4.8 mm, for a material thickness of up to 1.6 mm

UNIFOX-CT 4,8 1212475 1

Professional cable binder pliers, for plastic cable binders with a
width of 2.2 - 4.8 mm, up to 1.6 mm material thickness

Ergonomically designed grip with comfortable tension UNIFOX-CT 4,8P 1212609 1

force adjustment

574 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Installation and mounting material - CABINET add-on
Cable routing, cable protection, cable bundling
Plastic cable binders

Cable tie length of 98 - 1000 mm



Technical data
General data
Material PA 6.6
– The black cable binders are UV stabilized Components free from silicone and halogen
by adding carbon black and are suitable Inflammability class according to UL 94 V2
Temperature range [°C] -40 ... 85
for use in outdoor systems according to
ISO 4895 (QUV-B 150 hours) for up to Ordering data
three years Description Color Type Order No.
Pcs. /
– Temperature range: briefly up to 110°C Pkt.

– Comprehensive approvals Cable binder, maximum bundle Ø [mm]/minimum tensile strength

[N]
21 / 80 black WT-HF 2,5X98 BK 3240733 100
40 / 80 black WT-HF 2,6X160 BK 3240737 100
52 / 80 black WT-HF 2,6X200 BK 3240741 100
35 / 130 black WT-HF 3,6X140 BK 3240745 100
50 / 130 black WT-HF 3,6X200 BK 3240749 100
80 / 130 black WT-HF 3,6X290 BK 3240753 100
40 / 220 black WT-HF 4,5X160 BK 3240757 100
50 / 220 black WT-HF 4,5X200 BK 3240761 100
79 / 220 black WT-HF 4,5X290 BK 3240765 100
100 / 220 black WT-HF 4,5X360 BK 3240769 100
115 / 220 black WT-HF 4,5X430 BK 3240771 100
80 / 540 black WT-HF 7,8X300 BK 3240773 100
100 / 540 black WT-HF 7,8X365 BK 3240775 100
158 / 540 black WT-HF 7,8X540 BK 3240721 100
233 / 700 black WT-HF 9X780 BK 3240779 100
143 / 1080 black WT-HF 12,6X850 BK 3240731 50
302 / 1080 black WT-HF 12,6X1000 BK 3240729 50
Cable binder, large pack, maximum bundle Ø [mm]/minimum
tensile strength [N]
21 / 80 black WT-HF 2,5X98 BK-L 3240734 1000
40 / 80 black WT-HF 2,6X160 BK-L 3240738 1000
52 / 80 black WT-HF 2,6X200 BK-L 3240742 1000
35 / 130 black WT-HF 3,6X140 BK-L 3240746 1000
50 / 130 black WT-HF 3,6X200 BK-L 3240750 1000
80 / 130 black WT-HF 3,6X290 BK-L 3240754 500
40 / 220 black WT-HF 4,5X160 BK-L 3240758 1000
50 / 220 black WT-HF 4,5X200 BK-L 3240762 1000

Accessories
Cable binder pliers, for plastic cable binders with a
width of 2.2 - 4.8 mm, for a material thickness of up to 1.6 mm

UNIFOX-CT 4,8 1212475 1

Professional cable binder pliers, for plastic cable binders
with a width of 2.2 - 4.8 mm, up to 1.6 mm material thickness

Ergonomically designed grip with comfortable tension force UNIFOX-CT 4,8P 1212609 1
adjustment

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 575

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Installation and mounting material - CABINET add-on
Cable routing, cable protection, cable bundling
Cable binders for outdoor use

Cable tie length of 98 - 365 mm

Technical data
General data
Material PA 6.6
The WT-UV HF ... cable binders are spe- Components free from silicone and halogen
cially designed for outdoor use and offer the Inflammability class according to UL 94 V2
Temperature range [°C] -40 ... 105
following features:
– Weatherproof and UV resistant according Ordering data
to ISO 4892 (QUV-B 600 hours) for up Description Color Type Order No.
Pcs. /
to ten years Pkt.

– Cable binders are easy to use, thanks to Cable binder, maximum bundle Ø [mm]/minimum tensile strength
[N]
their optimum geometries 21 / 80 black WT-UV HF 2,5X98 BK 3240831 100
– Optimum head shape for high tensile 35 / 130 black WT-UV HF 3,6X140 BK 3240832 100
50 / 130 black WT-UV HF 3,6X200 BK 3240833 100
forces 50 / 220 black WT-UV HF 4,5X200 BK 3240834 100
– Halogen-free/silicone-free 79 / 220 black WT-UV HF 4,5X290 BK 3240835 100
– Constantly high temperature resistance 100 / 540 black WT-UV HF 7,8X365 BK 3240837 100

up to 105°C Accessories
– Designation example:  Cable binder pliers, for plastic cable binders with a width of 2.2 -
WT-UV HF 2,5X98 BK  4.8 mm, for a material thickness of up to 1.6 mm

Cable binder width: 2.5 mm UNIFOX-CT 4,8 1212475 1

Cable binder length: 98 mm Professional cable binder pliers, for plastic cable binders with a
width of 2.2 - 4.8 mm, up to 1.6 mm material thickness

Ergonomically designed grip with comfortable tension force adjust- UNIFOX-CT 4,8P 1212609 1
ment

576 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Installation and mounting material - CABINET add-on
Cable routing, cable protection, cable bundling
Cable binders for use
at high temperatures

Cable tie length of 98 - 365 mm

Technical data
General data
Material PA 6.6
The WT-HT HF ... cable binders are Components free from silicone and halogen
specially designed for high-temperature Inflammability class according to UL 94 V2
Temperature range [°C] -40 ... 125
applications and offer the following features:
– Constantly high temperature resistance Ordering data
up to 125°C and briefly up to 145°C Description Color Type Order No.
Pcs. /
– Cable binders are easy to use, thanks to Pkt.

their optimum geometries Cable binder, maximum bundle Ø [mm]/minimum tensile strength
[N]
– Black cable binders are UV stabilized 21 / 80 transparent WT-HT HF 2,5X98 3240780 100
– Special head shape for high tensile forces 35 / 130 transparent WT-HT HF 3,6X140 3240782 100
50 / 130 transparent WT-HT HF 3,6X200 3240784 100
– Halogen-free/silicone-free 50 / 220 transparent WT-HT HF 4,5X200 3240786 100
– Designation example:  79 / 220 transparent WT-HT HF 4,5X290 3240788 100
WT-HT HF 2,5X98 100 / 540 transparent WT-HT HF 7,8X365 3240792 100
Cable binder, maximum bundle Ø [mm]/minimum tensile strength
Cable binder width: 2.5 mm [N]
Cable binder length: 98 mm 21 / 80 black WT-HT HF 2,5X98 BK 3240781 100
35 / 130 black WT-HT HF 3,6X140 BK 3240783 100
50 / 130 black WT-HT HF 3,6X200 BK 3240785 100
50 / 220 black WT-HT HF 4,5X200 BK 3240787 100
79 / 220 black WT-HT HF 4,5X290 BK 3240789 100
100 / 540 black WT-HT HF 7,8X365 BK 3240793 100

Accessories
Cable binder pliers, for plastic cable binders with a width of 2.2 -
 4.8 mm, for a material thickness of up to 1.6 mm

UNIFOX-CT 4,8 1212475 1

Professional cable binder pliers, for plastic cable binders with a
width of 2.2 - 4.8 mm, up to 1.6 mm material thickness

Ergonomically designed grip with comfortable tension force adjust- UNIFOX-CT 4,8P 1212609 1
ment

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 577

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Installation and mounting material - CABINET add-on
Cable routing, cable protection, cable bundling
Cable binders for reopening

Cable tie length of 200 - 350 mm

Technical data
General data
Material PA 6.6
Components free from silicone and halogen
Inflammability class according to UL 94 V2
Temperature range [°C] -40 ... 80

Ordering data
The WT-D HF ... cable binders are ideal
for temporary mounting and offer the Description Color Type Order No.
Pcs. /
Pkt.
following features:
– Can be removed easily without tools and Cable binder, maximum bundle Ø [mm]/minimum tensile strength
[N]
reused 50 / 220 transparent WT-D HF 7,5X200 3240712 100
– Cable binders are easy to use, thanks to 65 / 220 transparent WT-D HF 7,5X250 3240714 100
100 / 220 transparent WT-D HF 7,5X350 3240716 100
their optimum geometries Cable binder, maximum bundle Ø [mm]/minimum tensile strength
– Halogen-free/silicone-free [N]
50 / 220 black WT-D HF 7,5X200 BK 3240713 100
65 / 220 black WT-D HF 7,5X250 BK 3240715 100
100 / 220 black WT-D HF 7,5X350 BK 3240717 100

Cable binders with lug for direct rivet Notes:

or screw mounting For corresponding cable binder pliers, see previous page.

Cable tie length of 150 - 380 mm

Technical data
General data
Material PA 6.6
Components free from silicone and halogen
Inflammability class according to UL 94 V2
Temperature range [°C] -40 ... 85

Ordering data
The WT-E HF ... cable binders with lug for
direct mounting offer the following features: Description Color Type Order No.
Pcs. /
Pkt.
– Space saving, thanks to molded fastening
lug Cable binder, maximum bundle Ø [mm]/minimum tensile strength
[N]
– Secure hold, thanks to screw 32 / 130 hole diameter 4.5 mm transparent WT-E HF 3,6X150 3240718 100
or rivet fixing 50 / 220 hole diameter 5.2 mm transparent WT-E HF 4,8X200 3240720 100
44 / 540 hole diameter 6.5 mm transparent WT-E HF 7,8X200 3240722 100
– Easy to use 75 / 540 hole diameter 6.5 mm transparent WT-E HF 7,8X300 3240724 100
– Halogen-free/silicone-free 104 / 540 hole diameter 6.5 mm transparent WT-E HF 7,8X380 3240726 100
– Optimum head shape for high tensile
forces
– Temperature range: briefly up to 110°C
578 PHOENIX CONTACT
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Installation and mounting material - CABINET add-on
Cable routing, cable protection, cable bundling
Cable binders with body-bound rivet Notes:
for direct mounting For corresponding cable binder pliers, see previous page.

Cable tie length of 150 - 200 mm

Technical data
General data
Material PA 6.6
Components free from silicone and halogen
Inflammability class according to UL 94 V2
Temperature range [°C] -40 ... 85

Ordering data
The WT-R HF ... cable binders for
straightforward direct mounting offer the Description Color Type Order No.
Pcs. /
Pkt.
following features:
– Space saving, thanks to molded body- Cable binder,
maximum bundle Ø [mm]/minimum tensile strength [N]
bound rivet 38 / 130 hole diameter 5.2 mm transparent WT-R HF 3,6X150 3240801 100
– Easy to plug in and optimum hold in 50 / 220 hole diameter 6.3 mm transparent WT-R HF 4,8X200 3240803 100

standard drill hole

– Optimum head shape for high tensile
forces
– Halogen-free/silicone-free

Detectable cable binders Notes:

For corresponding cable binder pliers, see previous page.

Cable tie length of 98 - 365 mm

Technical data
General data
Material PA 6.6
Components free from silicone and halogen
Inflammability class according to UL 94 V2
Temperature range [°C] -40 ... 85

Ordering data
The WT-ID HF ... cable binders are
specially designed for production processes Description Color Type Order No.
Pcs. /
Pkt.
in the food, pharmaceutical, and chemical
industries and offer the following features: Cable binder, with metal portions,
maximum bundle Ø [mm]/minimum tensile strength [N]
– High level of protection against contami- 21 / 80 blue WT-ID HF 2,5X98 BU 3240794 100
nation in the production process 35 / 130 blue WT-ID HF 3,5X140 BU 3240795 100
50 / 130 blue WT-ID HF 3,5X200 BU 3240796 100
– Detectable using X-ray units or metal 50 / 220 blue WT-ID HF 4,5X200 BU 3240797 100
detectors 79 / 220 blue WT-ID HF 4,5X290 BU 3240798 100
– Magnetic 100 / 540 blue WT-ID HF 7,5X365 BU 3240800 100

– Easy to see
– Corrosion-free

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 579

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Installation and mounting material - CABINET add-on
Cable routing, cable protection, cable bundling
Cable binders made of stainless steel Notes:
AISI 304 (V2A) For corresponding stainless steel cable markers, see page 222.

Cable tie length of 150 - 1067 mm

Technical data
General data
Material Stainless steel 1.4301/AISI 304
The WT-STEEL S ... cable binders are Temperature range [°C] -80 ... 538
especially suited to use outdoors and in the Ordering data
chemical industry. They offer the following
Pcs. /
features: Description Color Type Order No.
Pkt.
– Secure, permanent attachment and a long Cable binder, made of stainless steel (AISI 304), width 4.6 mm,
service life maximum bundle Ø [mm]/minimum tensile strength [N]
– Corrosion resistant 30 / 890 silver WT-STEEL S 4,6X150 3240807 100
– Chemical resistance 50 / 890 silver WT-STEEL S 4,6X201 3240808 100
– UV resistant 69 / 890 silver WT-STEEL S 4,6X259 3240809 100
102 / 890 silver WT-STEEL S 4,6X360 3240810 100
– Weatherproof 152 / 890 silver WT-STEEL S 4,6X520 3240811 100
– Fire-proof 203 / 890 silver WT-STEEL S 4,6X679 3240812 100
– Vibration-resistant 254 / 890 silver WT-STEEL S 4,6X838 3240723 100
305 / 890 silver WT-STEEL S 4,6X1067 3240805 100
– Easy to use and self-locking Cable binder, made of stainless steel (AISI 304), width 7.9 mm,
– Anti-magnetic maximum bundle Ø [mm]/minimum tensile strength [N]

– Halogen-free/silicone-free 69 / 1335 silver WT-STEEL S 7,9X259 3240814 100

102 / 1335 silver WT-STEEL S 7,9X360 3240815 100
152 / 1335 silver WT-STEEL S 7,9X520 3240816 100
203 / 1335 silver WT-STEEL S 7,9X679 3240817 100
254 / 1335 silver WT-STEEL S 7,9X838 3240725 100
305 / 1335 silver WT-STEEL S 7,9X1067 3240813 100

Accessories
Cable binder pliers, for steel cable binders with a width of up to
7.9 mm, for a material thickness of up to 0.3 mm
UNIFOX-CT M 7,9 1212610 1

580 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Installation and mounting material - CABINET add-on
Cable routing, cable protection, cable bundling
Cable binders made of stainless steel
AISI 316 (V4A)

Cable tie length of 150 - 1067 mm

Technical data
General data
Material Stainless steel 1.4401/AISI 316
The WT-STEEL SH ... cable binders are Temperature range [°C] -80 ... 538
especially suited to use with aggressive Ordering data
chemicals and in onshore and offshore
Pcs. /
areas. They offer the following features: Description Color Type Order No.
Pkt.
– Secure, permanent attachment with long Cable binder, made of stainless steel (AISI 316), width 4.6 mm,
service life maximum bundle Ø [mm]/minimum tensile strength [N]
– Corrosion resistant when exposed to 30 / 890 silver WT-STEEL SH 4,6X150 3240820 100
aggressive chemicals, e.g., acids, salt fog, 50 / 890 silver WT-STEEL SH 4,6X201 3240821 100
and sea water 69 / 890 silver WT-STEEL SH 4,6X259 3240822 100
102 / 890 silver WT-STEEL SH 4,6X360 3240823 100
– UV resistant 152 / 890 silver WT-STEEL SH 4,6X520 3240824 100
– Weatherproof 203 / 890 silver WT-STEEL SH 4,6X679 3240825 100
– Fire-proof 254 / 890 silver WT-STEEL SH 4,6X838 3240727 100
305 / 890 silver WT-STEEL SH 4,6X1067 3240818 100
– Vibration-resistant Cable binder, made of stainless steel (AISI 316), width 7.9 mm,
– Easy to use maximum bundle Ø [mm]/minimum tensile strength [N]

– Anti-magnetic 69 / 1335 silver WT-STEEL SH 7,9X259 3240827 100

– Halogen-free/silicone-free 102 / 1335 silver WT-STEEL SH 7,9X360 3240828 100
152 / 1335 silver WT-STEEL SH 7,9X520 3240829 100
203 / 1335 silver WT-STEEL SH 7,9X679 3240830 100
254 / 1335 silver WT-STEEL SH 7,9X838 3240766 100
305 / 1335 silver WT-STEEL SH 7,9X1067 3240826 100

Accessories
Cable binder pliers, for steel cable binders with a width of up to
7.9 mm, for a material thickness of up to 0.3 mm
UNIFOX-CT M 7,9 1212610 1

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 581

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Installation and mounting material - CABINET add-on
Cable routing, cable protection, cable bundling
Cable binder base, self-adhesive
and/or screwable

Technical data
General data
Material ABS
Inflammability class according to UL 94 HB
Temperature range [°C] -40 ... 60

Ordering data
The WT-BASE LS ... cable binder bases Pcs. /
Description Color Type Order No.
are characterized by their excellent adhe- Pkt.
sive properties as well as the following: Cable binder base, for cable binders of up to 4 mm width,
self-adhesive and screwable, 4 mm fixing hole, dimensions:
– Easy to use 19 x 19 mm
– Cable binders can be fed through on four transparent WT-BASE LS HF 4 3240706 100
sides black WT-BASE LS HF 4 BK 3240707 100
Cable binder base, for cable binders of up to 6 mm width,
– Self-adhesive and optionally screwable self-adhesive and screwable, 4.8 mm fixing hole, dimensions:
– Secure hold, load can be applied after just 27 x 27 mm
transparent WT-BASE LS HF 6 3240708 100
a few minutes black WT-BASE LS HF 6 BK 3240709 100
– Halogen-free/silicone-free

Cable binder base, screwable

Technical data
General data
Material PA 6.6
Inflammability class according to UL 94 V2
Temperature range [°C] -40 ... 85

Ordering data
– Space-saving design Pcs. /
Description Color Type Order No.
– Easy to use Pkt.
– Cable binders can be fed through on two Cable binder base, for cable binders of up to 5 mm width,
screwable, 3.5 mm fixing hole, dimensions: 9.5 x 15 mm
sides
– Halogen-free/silicone-free transparent WT-BASE HF 5 3240702 100
black WT-BASE HF 5 BK 3240703 100
Cable binder base, for cable binders of up to 9 mm width,
screwable, 5 mm fixing hole, dimensions: 14.6 x 22 mm

transparent WT-BASE HF 9 3240704 100

black WT-BASE HF 9 BK 3240705 100

582 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Installation and mounting material - CABINET add-on
Cable routing, cable protection, cable bundling
Cable binder base for direct mounting

– WT-BASE R ... with molded body-bound

rivet for direct mounting in materials of
up to 3 mm thickness
– WT-BASE P ... is ideally suited to use in
solid panels
– Easy to use, can be directly knocked into
the panel

Technical data Technical data

General data
Material PA 6.6 PA 6
Inflammability class according to UL 94 V2 HB
Temperature range [°C] -40 ... 85 -10 ... 65

Ordering data Ordering data

Pcs. / Pcs. /
Description Color Type Order No. Type Order No.
Pkt. Pkt.
Cable binder base, for cable binders of up to 8 mm width,
with molded body-bound rivet, 6.5 mm drilling diameter

transparent WT-BASE R HF 8 3240711 100

Cable binder base, for cable binders of up to 9.5 mm width,
with fins, 8 mm drilling diameter, can be knocked in

black WT-BASE P HF 9,5 BK 3240710 100

Cable drillers, for fast and tool-free

bundling of conductors and cables

Technical data
General data
Material PA 6.6
Inflammability class according to UL 94 V2
Temperature range [°C] -40 ... 85

Ordering data
– Fast and easy to use Pcs. /
Description Color Type Order No.
– Can be removed again Pkt.
– Reusable Cable driller
– Tool-free mounting Bundle diameters 5.1 - 7.6 mm transparent WG-D HF 7,6 3241099 1000
Bundle diameters 7.6 - 10.2 mm transparent WG-D HF 10,2 3241101 1000
– Ideal for temporary bundling Bundle diameters 10.2 - 12.7 mm transparent WG-D HF 12,7 3241103 1000
– Halogen-free/silicone-free Bundle diameters 12.7 - 16 mm transparent WG-D HF 16 3241105 1000
Bundle diameters 16 - 20.3 mm transparent WG-D HF 20,3 3241107 1000
Cable driller
Bundle diameters 5.1 - 7.6 mm black WG-D HF 7,6 BK 3241100 1000
Bundle diameters 7.6 - 10.2 mm black WG-D HF 10,2 BK 3241102 1000
Bundle diameters 10.2 - 12.7 mm black WG-D HF 12,7 BK 3241104 1000
Bundle diameters 12.7 - 16 mm black WG-D HF 16 BK 3241106 1000
Bundle diameters 16 - 20.3 mm black WG-D HF 20,3 BK 3241108 1000

For additional information, visit www.phoenixcontact.net/products PHOENIX CONTACT 583

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Technical information
General information and regulations

danger. These are legally binding regulations mechanical influences, and their behavior in
Quality in quantity of the European Union (EU). In other relation to environmental influences.
words, compliance with the requirements is Furthermore, Phoenix Testlab is a “Notified
a statutory condition for marketing Body” in accordance with EMC Directive
the product within the EU. 2004/108/EC and according to R&TTE
Where applicable, the products that our Directive 1999/5/EC for radio and
company currently manufactures fall within telecommunications terminal equipment.
the scope of the following directives: As a “Telecom Certification Body” (TCB),
– 2006/95/EC Phoenix Testlab may also approve these
Electrical equipment designed for use products for markets in the USA, Canada,
within certain voltage limits (Low- and Japan.
Voltage Directive)
– 2004/108/EC Standards and regulations
Electromagnetic compatibility All relevant standards and regulations
(EMC Directive) are used as the basis for the development
– 2006/42/EC and maintenance of our products.
Safety of machinery International standards are subject to
(Machinery Directive) continuous changes as a result of
– 94/9/EC harmonization and new developments. In
Equipment and protective systems line with this process, the current version of
Integrated management system intended for use in potentially explosive all standards that are relevant to our
The aim of the Phoenix Contact areas (ATEX Directive 100a) products is documented in the product area
integrated management system is to – 1999/5/EC on our website at
coordinate all the requirements regarding Radio equipment and www.phoenixcontact.net/products.
products, processes, and organization. telecommunications terminal equipment
Statutory and regulatory requirements, (R&TTE) Online product information service
as well as those of international standards The standards upon which the specified on the web
and our customers, are met and, in some directives are based have been part of our Phoenix Contact's product range is
cases, even exceeded in all phases of the standard of development for a long time. growing constantly.
product lifecycle. This guarantees conformance with Due to our commitment to product
The Phoenix Contact management European directives. The numbers of the monitoring, all products are subject to
system is monitored by internationally directives indicate their version at the time improvement.
recognized independent bodies each year to of publication. In the event of changes to The Internet is an ideal platform to
ensure that quality, environmental directives and/or standards, our products quickly communicate new product
protection, and safety at the workplace have will undergo conformity assessment again in developments and improvements to the
been integrated in conformity with the good time and a new declaration of market.
relevant requirements. Certification in conformity will be issued simultaneously. You can quickly access the relevant
accordance with international standards The current declarations for each product Phoenix Contact website for your region via
ISO 9001, ISO 14001, and BS OHSAS 18001 can also be found in our Download Center. www.phoenixcontact.com. Here, you will
is the result of our corporate philosophy of The EMC Directive occupies a special always find the latest overview of products,
meeting the needs of our customers, staff, place among the European directives listed. solutions, and services from Phoenix
and environment as fully as possible. They It defines electromagnetic compatibility as a Contact. This includes technical documents,
serve as the basis for innovative products fundamental property of devices based on such as data sheets and user manuals, the
with the familiar high Phoenix quality mandatory guidelines. European Law latest driver and demo software, plus a
standard, actively practiced environmental therefore acknowledges the means of contacting the appropriate
protection, and responsibility in the field of electromagnetic compatibility of devices contact person directly.
occupational health and safety. Of course, and systems as an important condition for
we integrate all further requirements of error-free operation of machinery and
standards, international approvals or special systems. Phoenix Contact is one of the
customer requirements into company leading international companies in surge
processes. protection, and therefore possesses broad
This system provides a building block for expertise in EMC. This expertise and the
the success of the Phoenix Contact Group experience gained over years of developing
and its products and services. and applying industrial interface and
communication technology have resulted in
CE marking our products having an extremely high
The CE mark was introduced as an standard of quality with regard to
important instrument for the free electromagnetic compatibility. It was with a
movement of goods and services within the view to providing other companies with this
single European market. By attaching the expertise that our associate company,
mark to a product, the manufacturer Phoenix Testlab, was founded. Phoenix
confirms that it complies with all applicable Testlab GmbH is an independent, accredited
European Union (EU) directives. EC service provider offering EMC testing that
directives describe the product properties conforms to European standards. At
with regard to device safety and avoiding Phoenix Testlab, devices are also tested
with regard to their electrical safety,
584 PHOENIX CONTACT
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Technical information
Marking and labeling - MARKING system

Materials

Polyamide (PA) Contact is silicone-free and is suitable for

Polyamide has excellent electrical, use in temperatures between -30°C and
mechanical, chemical, and thermal +80°C.
properties, even at high operating
temperatures. Brief peak temperatures of Polyester
up to 200°C are permitted as a result of Polyester is a chemical-resistant
heat aging stabilization. Polyamide absorbs material. It is ideally suited to printing,
moisture from its surroundings (2.8% on shaping, and punching. Polyester is resistant
average). However, this moisture is not in to UV radiation and absorbs little moisture.
the form of crystallization water in the The polyester used by Phoenix Contact is
plastic itself, but chemically bonded H2O silicone- and halogen-free. Depending on its
groups in the molecule structure. This composition, it is suitable for use in
makes the plastic flexible and resistant to temperatures between -40°C and +150°C.
breakage, even at temperatures as low as
-60°C. PA belongs to inflammability class V2 Polyolefin
to V0 as per UL 94. The polyamide used by Polyolefines are semi-crystalline
Phoenix Contact is silicone- and halogen-free thermoplastics, which can be easily
and is suitable for use at temperatures processed as extrusion profiles (shrink
between -60°C and +125°C. sleeves). They are characterized by good
chemical resistance. Silicone-free,
Polycarbonate (PC) temperature range: 55°C to +125°C.
Polycarbonate has a high mechanical
strength and chemical resistance. Rigidity, Polyethylene (PE)
dimensional stability, and good heat Polyethylene is a thermoplastic material
distortion resistance are further which is highly resistant to acids, alkalis, and
distinguishing features of this material. other solvents. PE absorbs hardly any
Polycarbonate is used to manufacture moisture and has high durability and
particularly smooth and stable marking breaking elongation. Silicone- and halogen-
materials. The polycarbonate used by free, temperature range: -40°C to +80°C.
Phoenix Contact is silicone- and halogen-
free. It absorbs little moisture and is Halogen-free
suitable for use at temperatures between The term halogen-free, based on
-40°C and +125°C. international standards for base materials
for PCBs (e.g., IEC 61249-2-21,
Polycarbonate/Acrylonitrile IPC 4101 C), relates to the elements
butadiene styrene (PC/ABS) chlorine and bromine in flame protection
PC/ABS blends are amorphous agents. This also forbids the use of flame
thermoplastics which are characterized by protection agents containing halogen in
high impact strength potential even at low accordance with DIN EN ISO 1043-4.
temperatures. They are resistant to acids This means that, according to the
and lyes, for example. In addition to definition in the ZVEI position paper
benefiting from a high dimensional accuracy (requirements for the use of halogen-free
and low distortion tendency, they absorb products in the electrical and electronics
little moisture. The products manufactured industry), no flame protection agents
from these blends have high-gloss surfaces. containing halogen or PVC are present in
Temperature range: -50°C to +90°C. the components.

Acrylonitrile butadiene styrene (ABS)

ABS is a copolymer. It has a high impact
strength and is strong and hard. The ABS
used by Phoenix Contact is silicone-free and
is suitable for use at temperatures between
-40°C and +85°C.

Polyvinyl chloride (PVC)

PVC has a long service life. It is
characterized in particular by its
outstanding mechanical strength and high
chemical resistance. Neither oxygen nor
ozone affects PVC. The material is resistant
to corrosive salt solutions and most acids.
The polyvinyl chloride used by Phoenix
PHOENIX CONTACT 585
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Technical information
Marking and labeling - MARKING system

Inflammability classification
UL 94 V0/1/2
The inflammability tests for plastics have The test bar is clamped vertically and
been defined by the Underwriters flame-treated several times. Each flame
Laboratory (USA) in regulation UL 94. This treatment lasts 10 seconds. Between the
applies to all areas of application, but in flame treatments, the time until the test bar
particular to electrical engineering. is extinguished is measured. Afterwards, the
Inflammability of the plastic material is afterburning times and the drip behavior are
examined in the test laboratory in a evaluated.
horizontal (HB - Horizontal Burn) or This test setup is not suitable for foils
vertical (V - Vertical Burn) test with a naked and/or very thin test objects that shrink
flame. In order of increasing resistance to when exposed to the heat of the flame.
combustion, the evaluation classes are HB, Phoenix Contact only uses plastics
V1, V2, V0. Test results are listed on “yellow which conform to UL 94 V1/2/0.
cards” and are published annually in the Test setup according to UL 94 V0/1/2
Recognized Component Directory.
The flash point, the combustion point,
and the ignition point of a material are
decisive with regard to behavior in fire.
The tests show that the classifications of
UL 94 V1/2/0 are stricter than those of
UL 94 HB.

Classification
UL 94 V0 UL 94 V1 UL 94 V2 UL 94 HB
Burning time after each flame treatment 10 s 30 s 10 s –
Total burning time after 10 flame treatments 50 s 250 s 250 s –
Glowing time after the 2nd flame treatment 30 s 60 s 60 s –
Complete burn-off No No No Yes
Ignition of the absorbent cotton under the sample No No Yes –

Halogen-free flame protection

DIN EN ISO 1043-4

Halogens are the chemical elements polycarbonate/acrylonitrile butadiene
astatine, fluorine, chlorine, bromine, and styrene, acrylonitrile butadiene styrene, and
iodine. One characteristic of the halogen polyolefines feature halogen-free flame
compounds of bromine and chlorine relates protection systems.
to the reduction in the degree of
inflammability when used in plastics. In the
event of fire, poisonous corrosive gases are
formed. Secondary damage attributable in
part to the water used to extinguish the fire
can also be caused. For this reason, Phoenix
Contact does not use any flame protection
systems which contain halogen or other
additives. Polyamide, polycarbonate,

586 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Technical information
Marking and labeling - MARKING system

Aging test
IEC 60947-7-1/-2
Modular terminal blocks are +120°C (+80°C for PVC). The test objects T/°C
characterized, among other things, by long reach the maximum permissible operating
life cycles and their ability to safely temperature during the warming phase and
withstand continuous temperatures of the 10-minute pause phase. The cooling
+125°C. In order to ensure that the labeling down phase follows. This test consists of a
of these terminal blocks also meets these total of 192 cycles.
requirements, Phoenix Contact uses Without exception, Phoenix Contact
labeling materials with heat stabilizers. marking materials are tested according to
To simulate usage over several years, the IEC 60947-7-1/-2. All plastics used also have
t/min
marking materials, together with the sufficient safety reserves.
terminal blocks or conductors, are
subjected to a defined temperature cycle in Cycle

the climate cabinet. The minimum Temperature in relation to time

temperature in the climate cabinet is set to
+20°C and the maximum temperature to

Resistance to oil and chemicals

In accordance with DIN EN ISO 175
Physical and/or chemical processes/
Chemical Weight % Chemical Weight %
reactions can occur as a result of external
media, such as liquids or gases. This can
result in a change to the plastic's properties. Alkalis Oils, greases, aliphatic, and aromatic hydrocarbons

The plastic can be damaged or even Sodium hydroxide solution 3 IRM 902 100
destroyed. Imprints and labels can also be Potassium hydroxide solution 3 IRM 903 100
affected by these changes. 25 ASTM No.1 100
Ammonium hydroxide (ammonia water)
In order to prevent this from happening, Xylol 100
Phoenix Contact uses only plastics and Alcohols Test benzene (180/220) 100
printing/labeling materials which have been Ethanol 100 Hycut SU 68 100
tested based on DIN EN ISO 175. 1-propanol 100 Hycut SET 46 100

2-propanol 100 Shell Tellus 92 100

Diethylene glycol 100 Aqueous salt solutions

Sodium chloride 5
Aldehyde/ketones
Potassium chloride 5
Ethyl acetate 100
100
Ammonium chloride (ammonia solution)

UV light resistance
In accordance with DIN EN ISO 4892-2 and
DIN EN ISO 60068-2-5
UV-B components restrict mechanical
properties in plastics. As a consequence,
imprints and labels can be damaged to a
greater or lesser extent dependent upon
the type of plastic.
Marking materials from Phoenix
Contact can be stored in dry as well as
humid atmospheres under UV radiation and
are tested in accordance with the
aforementioned standards.

PHOENIX CONTACT 587

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Technical information
Marking and labeling - MARKING system

Corrosion test

DIN 50018
Extreme ambient influences impose All marking materials used by Phoenix
demanding requirements on components Contact conform to this demanding
and their labeling and marking. standard and are resistant to aggressive
The following test method, based on substances.
DIN 50018, describes the corrosion test in
an alternating condensation climate with an
atmosphere that contains sulfur dioxide.
Two liters of distilled water and one liter
of SO2 gas are introduced into a climate
cabinet. During the test and at a test
temperature of 40°C, an acidic atmosphere
is formed, which affects the material
surfaces of the test objects. After
eight hours of testing, the test objects dry
for 16 hours with the door open. Finally, a
microscopic visual check is performed.

Salt spray

IEC 60068-2-11/-52
Particularly in shipbuilding, technical Phoenix Contact marking materials fulfill
components have to be marked and must these stringent requirements and can be
remain permanently legible in corrosive used even in extreme climatic conditions.
atmospheres. The salt content of the air in
combination with the increased humidity
places high demands on the imprints and
materials used. The impact of the climate at
sea can be simulated on the basis of
IEC 60068-2-11/-52.
The resistance of the materials in a
corrosive atmosphere is tested using salt
spray. The test objects are placed in the test
chamber and subjected to a finely dosed
spray of 5% sodium chloride solution
(NaCl; pH value 6.5 - 7.2) at a temperature
of +35°C for a period of 96 hours.
A microscopic inspection is performed
after the test.

Resistance to solvents

In accordance with EN 60464-2:2001

Markings and labels must be resistant to marking materials are solvent-resistant and
a variety of solvent vapors. Based on the fulfill the stringent requirements.
above standard, imprints and labels are
stored in acetone, n-hexane, and ethanol
for a period of 10 days and must be legible
at the end of this time. Phoenix Contact

588 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Technical information
Marking and labeling - MARKING system

Scratch resistance
In accordance with DIN EN ISO 1518
Labels and imprints must also be inspection of the test objects. Phoenix
resistant to external, point, and/or linear Contact marking materials fulfill these high
mechanical loads. mechanical requirements.
For this reason, Phoenix Contact tests
all labels and imprints for scratch resistance
in accordance with the aforementioned
standard. The test is carried out by applying
a scratching tool with a hemispherical tip
(1 mm in diameter) to the test objects.
Depending on the printing procedure, a
force of between 2 N and 6 N is applied.
This is followed by a visual and microscopic

Resistance to abrasion
According to KIMW 003, Part 1 In-house standard of the Lüdenscheid Plastics Institute
Labels and imprints must be resistant to various load classes defined in the in-house
externally applied surface loads. The standard on the basis of the pressure force
aforementioned in-house standard and the number of strokes at which they
prescribes grouping labels and imprints in sustain damage.
load classes. A felt disk (hardness H1 Phoenix Contact imprints and labels
according to DIN 61200) is subjected to meet the requirements of the highest load
various numbers of strokes (1000, 10,000, class K9 (30,000 strokes with 4 N pressure
30,000) with a pressure force of 1 N, 2 N, force).
and/or 4 N. Imprints are classified into the

Abrasion and wipe resistance

According to DIN EN 61010-1

Labels and imprints must be resistant to
standard industrial cleaning agents. The
aforementioned standard prescribes the use
of a soft cloth with water, isopropanol,
petroleum ether, and n-hexane to clean
labels and imprints. They must remain
clearly legible after cleaning.
Phoenix Contact marking materials fulfill
the stringent requirements as regards
abrasion and wipe resistance and can be
used in all applications.

Vibration resistance

According to IEC 60068-2-6

This test demonstrates the vibration objects are tested in the three axes for
resistance and the secure seating of the two hours each. The marking materials
marking materials under the influence of must not be damaged in such a way that
continuous vibrations. Harmonic, would impair their continued use.
sinusoidal vibrations are applied to the test All Phoenix Contact marking materials
object to simulate rotating, pulsating or meet the requirements of the standard and
oscillating forces. The test is performed on are particularly suitable for applications in
each of the three spatial axes (x, y, z). In the which they are subjected to high levels of
test, the object runs through a frequency vibration.
range of 3 Hz to 150 Hz at a speed of one
octave per minute. The r.m.s. value of the
acceleration is up to 50 m/s2. The test
PHOENIX CONTACT 589
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Technical information
Marking and labeling - MARKING system

Vibration test

According to DIN EN 61373 - broadband noise

(intensity according to DIN EN 50155)
In many applications and especially in marking materials must not be damaged in
traffic technology, labeling materials are such a way that would impair their
subjected to vibrations and shocks. For a continued use.
practical simulation of vibration stress, the All Phoenix Contact marking materials
test objects are tested for vibration fulfill these stringent vibration
resistance at increasing and decreasing requirements.
frequencies and amplitudes. In the test, the
objects run through a frequency range of
5 Hz to 150 Hz. The r.m.s. value of the
acceleration is up to 42.5 m/s2. The test
objects are tested for five hours in each of
the three axes (x, y, z). The components and

Grid test

In accordance with DIN EN ISO 2409

A Sellotape test is conducted based on
Pull-out direction
DIN EN ISO 2409. A transparent strip of
self-adhesive tape with an adhesive strength Marking
of 10 ± 1 N is attached to the print or label
to be tested. It is then pulled away from the
surface at an angle of 60° to the direction of Adhesive tape 60°
tensile force at a speed of 1 cm/s.
There should be no marks from the
print on the adhesive tape after the test.
Synthetic material
Phoenix Contact marking materials
meet the requirements of this standard.
Test setup
They are tough and resistant to peeling.

Adhesive strength test

In accordance with FINAT test method No. 2

The purpose of this test is to compare

the adhesive strength of labels on various
base materials. To this end, a strip of labels
(25 mm x 175 mm) is applied to the v=300 mm/min
respective base material with a specified
force. After a defined storage period, the
strip is removed from the base material at
an angle of 90° and a speed of 300 mm/min.
The adhesive strength is specified in
N/25 mm. The test therefore enables the 90
°
most suitable label for the application to be
selected.

590 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Technical information
Tools - TOOL fox

Cutting
Shear cutting of up to 2300 N/mm2 without damaging the
Ratchet-driven cable cutters are a quick tool. Bite cutting is suitable only to a limited
and reliable solution for cutting conductors extent for cutting through cables and lines.
and cables in the upper cross-section range The high-quality CUTFOX cutting tools
up to 1400 mm2. Special cutting geometries from Phoenix Contact can be relied upon
help to ensure that the tool is easily for long-term stability and permanently
accessible and can be relied upon to consistent results.
produce burr-free right-angle cuts. In this
cutting procedure, which is also known as
shear cutting, the two blades move towards Shear cutting
and past one another and cut (shear) the
material without burring. DIN 8588
describes this procedure as severing.
Bite cutting
During bite cutting, the material is
severed by two wedge-shaped blades
moving in opposite directions. The wedge
angle set for the blades is deliberately large
and stable. In addition to the hardening of
the entire tool, the cutting area is
subsequently hardened again inductively to
62 HRC. This makes it possible to sever
even extremely hard materials such as piano
wire and spring steel with a tensile strength Bite cutting

Stripping
Stripping describes removing the Phoenix Contact WIREFOX automatic
insulation of conductors up to 16 mm2. In stripping pliers can remove insulation
the case of larger conductor cross sections quickly and correctly.
and multiple-wire and multi-layer Permissible markings
on the insulation
conductors and cables, only the outer
insulation sheath is removed. The length of
the insulation to be removed varies
dependent upon terminal point and
connector. Removing the insulation must
Cable stripped correctly according to
not damage either the individual inner wires
DIN IEC 60352
or the braided shield. The remaining
insulation must also remain intact, although
pressure points on and color changes in the
insulation material are permitted. Further Insulation not cut cleanly,
blunt stripping blades
faults that need to be prevented are
stipulated in DIN IEC 60352.
Suitable blade geometries are used to
Insulation damaged,
process special insulation materials. gripper of stripping tool
V blades are used for both hard (e.g., Teflon/ damaged

Radox®) and soft ductile rubber insulations

(silicone). Insulation residue, blunt
or incorrectly set
stripping blade

Individual wires damaged

or cut, stripping blade not
set correctly

Cable stripped incorrectly according to

DIN IEC 60352

PHOENIX CONTACT 591

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Technical information
Tools - TOOL fox

Crimping/pressing/crushing
Crimping describes the joining of pressure. This guarantees the user a
contact and conductor mechanically. In constant crimping result with maximum
addition to crimping, two other terms are pull-out values.
used dependent upon the type of The DIN EN 60352-1 and
deformation. A distinction is made DIN EN 60999-1 standards are among the
between squeezing (for insulated cable references used to assess crimping results.
lugs) and pressing (for ferrules and In addition to a variety of electrical and
uninsulated cable lugs). Flat plugs are mechanical tests, conductor pull-out tests
described as being crimped. are the decisive criterion.
A number of important points must be All Phoenix Contact crimping tools
considered in order to establish a reliable have been adjusted and tested according
connection between contact and to valid standards. They ensure gas-tight
conductor: crimping that will remain stable in the
– The conductor must be processed long-term.
correctly
– The contact and the conductor must be
compatible
– The conductor must be positioned
correctly in the contact
– A suitable crimping tool must be
selected
Professional crimping pliers are always
equipped with a releasing pressure lock.
They unlock as soon as the required
crimping pressure is attained, thereby
ruling out the possibility of too little

Pressing
WM crimp B crimp Hex crimp
For pressing ferrules according For pressing uninsulated flat For pressing uninsulated tube
to DIN 46228-1 and plugs and slip-on sleeves. Areas lugs, coaxial plug-in
DIN 46228-4. Areas of application for of application for conductor sizes connectors, and fiber optic plug-in
conductor sizes 10 - 50 mm2. 0.1 - 6 mm2. connectors. Areas of application for
conductor sizes 0.5 - 6 mm2. Coaxial:
1.73 mm; 2.54 mm; 8.23 mm, 10.54 mm,
and 10.9 mm. FO: 3.25 mm, 3.84 mm,
4.52 mm, 5.0 mm, and 5.41 mm.

Square crimp Indent/prong crimp

For pressing ferrules according For pressing uninsulated cable
to DIN 46228. Areas of lugs. Areas of application for
application for conductor sizes conductor sizes 0.75 - 10 mm2.
0.14 - 10 mm2.

Trapezoid crimp Oval crimp Double indent crimp

For pressing ferrules according For pressing insulated cable For pressing uninsulated cable
to DIN 46228-1 and lugs and connectors. Areas of lugs. Areas of application for
DIN 46228-4. Areas of application for application for conductor sizes 0.1 - 6 mm2. conductor sizes 0.75 - 10 mm2.
conductor sizes 0.25 - 10 mm2.

592 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Technical information
Tools - TOOL fox

Conductor pull-out test

DIN EN 60352-2
In practice, crimping points can be
affected by tensile forces during wiring or
operation. Therefore, crimped contacts
must offer a high degree of mechanical
safety. To test the tensile load capacity of
the crimp, a predefined cross-sectional
tensile force is applied for a period of
60 seconds. The tensile force exerts stress
on the conductor at the crimping point.
The crimp must withstand the load
without sustaining damage.
The test results for Phoenix Contact
contacts are significantly higher than the
minimum values required by the standard.

Conductor cross sections/conductor pull-out forces

Structure and dimensions of connecting cables

Conductor pull-out forces
Crimping sleeves Ferrules Ferrules
Metric conductor Comparable conductor DIN EN 60352-2 IEC EN 60999 1) IEC EN 60947-7-1
cross section cross section (11/2006) (up to 35 mm2) (35 mm² and above)
AWG/kcmil [mm2] [mm2] [N] 2) [N] 3) [N] 3)
30 0.0507 0.05 6
(29) 0.0647
28 0.0804 0.08 11
(27) 0.102
26 0.128 0.12 15
(25) 0.163 0.14 18
24 0.205 0.22 28 10
(23) 0.259 0.25 32
22 0.325 0.32 40 15
(21) 0.412
20 0.519 0.5 60 20
(19) 0.653 0.75 85 30
18 0.824 0.82 90 30
(17) 1.04 1 108 35
16 1.307 1.3 135 40
(15) 1.651 1.5 150 40
14 2.082 2.1 200 50
(13) 2.627 2.5 230 50
12 3.307 3.3 275 60
(11) 4.169 4 310 60
10 5.26 6 360 80
(9) 6.633
8 8.367 8.4 370 90
(7) 10.55 10 380 90
6 13.229 100
(5) 16.767 16
4 21.148 135
(3) 26.667 25 156
2 33.624 35 190
1 42.406 236
0 53.482 50 236
00 67.43 70 285
000 85.014 95 351
0000 107.22 120 427
250 kcmil 127 120 427
300 kcmil 152 150 427
350 kcmil 177 185 503
400 kcmil 203 503
500 kcmil 253 240 578
600 kcmil 304 300 578
1) DIN 57609 has been replaced by IEC EN 60999.
2) Pull-out values for open and closed crimping sleeves and insulated crimping sleeves.
3) Pull-out values for ferrules, insulated and uninsulated.

PHOENIX CONTACT 593

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Technical information
Tools - TOOL fox

Gas tightness
Corrosion-free contact areas are a Two liters of distilled water and one liter
prerequisite for high-performance and of SO2 gas are introduced into a climate
low-resistance connections. The corrosion cabinet. At a test temperature of 40°C,
test described below shows that when used acidic compounds < Ph 7 form during the
correctly at contact points, Phoenix test and attack the metal surfaces. After
Contact crimping tools and connectors eight hours of testing, the test objects dry
achieve a permanent gas-tight connection for 16 hours with the door open. A visual
that remains intact even when exposed to check follows. Before and after the
aggressive substances. corrosion test, the contact resistance of the
The test method, which is based on contacts is recorded according to
DIN 50018, describes the corrosion test in DIN EN 60512-2-1:2002. Changes that can
an alternating condensation climate with an be attributed to the effects of corrosion are
atmosphere that contains sulfur dioxide. investigated.

Color codes
Conductors are marked in different
Conductor cross section Color
colors so that different types can be [mm2] AWG
identified more easily. Conductor cross
0.1 - 0.5 26 - 20 yellow/light green
sections and their corresponding color 0.25 - 0.75 24 - 18 green
codes are listed in the table. 0.5 - 1.5 20 - 16 red
1.5 - 2.5 16 - 14 blue
4-6 12 - 10 yellow
10 8 red
16 6 blue
25 4 yellow

594 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Technical information
Tools - TOOL fox

Tightening torque of terminal block screws

DIN EN 60947-1
Table 4 of the standard specifies the Extract from DIN EN 60947-1/
tightening torque to demonstrate the EN 60947-1, Table 4
mechanical strength of screw connections/ The torque according to IEC/EN and the recommended
screw terminal blocks. tightening torque for Phoenix Contact terminal blocks
are specified.
Although these torques are sufficient for
connecting conductors with Phoenix Head screw with slot
Contact terminal blocks, Thread Torque
the table opposite lists recommended
tightening torques which differ from those [Nm]
M 1.6 0.1*
in this standard and will ensure gas-tight
M 2.0 0.2*
connections that remain stable in the long M 2.5 (M 2.6) 0.4*
term. M3 0.5*
Phoenix Contact torque screwdrivers M4 1.2*
can be set to the corresponding torques. M 4.5 1.8*
M5 2.0*
M6 2.5*
M8 3.5*
M 10 4.0* / 10**
M 12 14**
M 14 19**
M 16 25**
M 20 36**
M 24 50**

* Valid for nuts and screws tightened with screwdrivers.

**Valid for nuts and screws that can be tightened with tools
other than screwdrivers.

Color designations

Color Code
White WH
Red RD
Blue BU
Green GN
Yellow YE
Gray GY
Brown BN
Orange OG
Black BK
Turquoise TQ
Ivory IV
Beige BE
Olive OL

PHOENIX CONTACT 595

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Technical information
CABINET add-on mounting material

DIN rails

DIN rails/grounding busbars

Excerpt from IEC 60947-7-2/EN 60947-7-2/DIN EN 60947-7-2/VDE 0611-3

Phoenix Contact type Rail profile Material Short circuit stability Short-time current Max. permissible
= E CU conductor resistance 1 s thermal nominal current
[mm²]* [kA] for PEN function [A]

NS 15 UNPERF 2000MM DIN rail according to EN 60715 -15 x 5.5 Steel 10 1.2 **

NS 15 PERF 2000MM DIN rail according to EN 60715 -15 x 5.5 Steel 10 1.2 **

NS 15-AL PERF 2000MM DIN rail, dimensions according to EN 60715 -15 x 5.5 Aluminum 16 1.92 76

NS 32 UNPERF 2000MM G-profile rail according to EN 60715 – G 32 Steel 35 4.2 **

NS 32 PERF 2000MM G-profile rail according to EN 60715 – G 32 Steel 35 4.2 **

NS 32-CU/35 QMM UNPERF 2000MM G-profile rail, dimensions according to EN 60715 – G 32 Copper 120 14.4 269

NS 32-CU/120 QMM UNPERF 2000MM G-profile rail, similar to EN 60715 – G 32 Copper 150 18.0 309

NS 35/7,5 UNPERF 2000MM DIN rail according to EN 60715 – 35 x 7.5 Steel 16 1.92 **

NS 35/7,5 PERF 2000MM DIN rail according to EN 60715 – 35 x 7.5 Steel 16 1.92 **

NS 35/7,5 ZN UNPERF 2000MM DIN rail, similar to EN 60715 – 35 x 7.5 Steel 16 1.92 **

NS 35/7,5 ZN PERF 2000MM DIN rail, similar to EN 60715 – 35 x 7.5 Steel 16 1.92 **

NS 35/7,5 V2A UNPERF 2000MM DIN rail, similar to EN 60715 – 35 x 7.5 Steel 16 1.92 **

NS 35/7,5-CU UNPERF 2000MM DIN rail, similar to EN 60715 – 35 x 7.5 Copper 50 6.0 150

NS 35/7,5-AL UNPERF 2000MM DIN rail, similar to EN 60715 – 35 x 7.5 Aluminum 35 4.2 125

NS 35/15-2,3 UNPERF 2000MM DIN rail according to EN 60715 – 35 x 15 Steel 50 6.0 **

NS 35/15 UNPERF 2000MM DIN rail, similar to EN 60715 – 35 x 15 Steel 25 3.0 **

NS 35/15 PERF 2000MM DIN rail, similar to EN 60715 – 35 x 15 Steel 25 3.0 **

NS 35/15 ZN UNPERF 2000MM DIN rail, similar to EN 60715 – 35 x 15 Steel 25 3.0 **

NS 35/15 ZN PERF 2000MM DIN rail, similar to EN 60715 – 35 x 15 Steel 25 3.0 **

NS 35/15-CU UNPERF 2000MM DIN rail, similar to EN 60715 – 35 x 15 Copper 95 11.4 232

NS 35/15-AL UNPERF 2000MM DIN rail, similar to EN 60715 – 35 x 15 Aluminum 70 8.4 192

* Cross sections calculated according to IEC 60439-1/EN 60439-1/DIN EN 60439-1/VDE 0660-500.

* * Grounding busbars made from steel are not permitted for the PEN function.

596 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Technical information
Certification bodies

Overview of certification bodies and safety marks

Certification bodies and approvals

Country
code
X Explosion protection Country
code
Ship classification societies
Country
code

j IECEE CB Scheme
(in combination with certifying body)
Internatio
nal
f FM Approvals US v Bureau Veritas FR

CENELEC Certification Agreement (CCA

CCA inspection report) EU  DEKRA Certification B.V. NL F Germanischer Lloyd AG DE
(in combination with certifying body)

C Canadian Standards Association (CSA) CA p Physikalisch-Technische

Bundesanstalt
DE x Lloyd's Register EMEA GB

N
Underwriters Laboratories Inc. (UL) US  QS Schaffhausen CH m Nippon Kaiji Kyokai JP
A
n
!
o
Underwriters Laboratories Inc. (UL)
CA VTT Expert Services Oy FI Det Norske Veritas NO
a - UL approval for Canada -

U Underwriters Laboratories Inc. (UL)

Combined logo
US
 IBExU Institut für Sicherheitstechnik
DE z Polski Rejestr Statków PL
u - UL approval for the USA and Canada -
CA GmbH

g INSIEME PER LA QUALITA'E LA

SICUREZZA
IT w TÜV Rheinland do Brasil BR y Russian Maritime Register of Shipping RU

N
P Gosudarstvenne Komitet Standartov
RU Underwriters Laboratories Inc. (UL) US d Korean Register of Shipping KR
(GOST)
A

 DEKRA Certification B.V. NL $ TÜV Nord DE l American Bureau of Shipping US

K Österreichischer Verband für

Elektrotechnik
AT  DEKRA EXAM GmbH DE

S South African Bureau of Standards ZA

s electrosuisse SEV Verband für Elektro-,

Energie- und Informationstechnik
CH

J Verband Deutscher Elektrotechniker

e.V.(VDE)
DE
V – Approval of drawings
– Reports with production monitoring

h
Berufsgenossenschaft (BG)
DE
GS - Geprüfte Sicherheit

T TÜV Rheinland Industrie Service GmbH DE

Note:
Subject to changes that serve the
purpose of technical progress.

PHOENIX CONTACT 597

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Index
Alphabetical

Type Order No. Page Type Order No. Page Type Order No. Page Type Order No. Page

AI 0,75- 8 GY -1000 3200894 445 AI 35 -18 RD 3201495 445 BG/S 1201086 502
AI 0,75- 8 GY-B 3201372 479 AI 35 -25 RD 3200713 445 BG/SA 1201604 502
AI 0,75- 8 GY-GB 1208979 448 AI 50 -20 BU 3200454 445 BG/SH 1201099 502
A AI 0,75- 8 WH 3201110 447 AI 50 -20 OL 3201178 447 BG/SHA 1201594 502

A 0,25- 5 3202465 444 AI 0,75- 8 WH-B 3201576 479 AI 50 -25 BU 3200726 445 BHN 5,5 1209965 424
A 0,25- 7 3202478 444 AI 0,75-10 GY 3201288 445 AI 70 -20 YE 3201848 445 BHN 8 1209978 424
A 0,34- 7 3009202 444 AI 0,75-12 GY 3200849 445 AI 95 -25 RD 3201853 445 BHN 10 1209981 424
A 0,5 - 6 3200218 444 AI 1 - 6 RD 3200742 445 AI SORTI BOX ANT 3202973 452 BHN 13 1209994 424

A 0,5 - 8 3202481 444 AI 1 - 6 YE 3201327 447 AI SORTI BOX RD 3202960 452 BLUEMARK CLED 5147999 33
A 0,5 -10 3202494 444 AI 1 - 8 RD 3200030 445 AI SORTI BOX-E LGY 3203008 452 BLUEMARK CLED CASE 5146725 33
A 0,75- 6 3200221 444 AI 1 - 8 RD -1000 3200904 445 AI-TWIN 2X 0,5 - 8 WH 3200933 450 BLUEMARK CLED SET 5147400 33
A 0,75- 8 3202504 444 AI 1 - 8 RD-B 3201385 479 AI-TWIN 2X 0,75- 8 GY 3200807 450 BLUEMARK CLED SET EN 5147401 33

A 0,75-10 3200234 444 AI 1 - 8 RD-GB 1208982 448 AI-TWIN 2X 0,75-10 GY 3200975 450 BLUEMARK CLED-BASE 5146669 33
A 1 -6 3200247 444 AI 1 - 8 YE 3201097 447 AI-TWIN 2X 1 - 8 RD 3200810 450 BLUEMARK CLED-FLUID-CARTR. 5146662 33
A 1 -8 3202517 444 AI 1 - 8 YE-B 3201589 479 AI-TWIN 2X 1 -10 RD 3200988 450 BLUEMARK CLED-MAG 20 5146655 33
A 1 -10 3200250 444 AI 1 -10 RD 3200182 445 AI-TWIN 2X 1,5 - 8 BK 3200823 450 BLUEMARK CLED-MAG 40 5146668 33

A 1,5 - 7 3200263 444 AI 1 -10 RD-GB-1000 1208869 448 AI-TWIN 2X 1,5 -10 BK 3201534 450 BLUEMARK CLED-STACKER 20 5146656 33
A 1,5 -10 3200276 444 AI 1 -12 RD 3200674 445 AI-TWIN 2X 1,5 -12 BK 3200991 450 BLUEMARK MAG AI-WM 5146567 175
A 1,5 -12 3202588 444 AI 1,5 - 6 BK 3200755 445 AI-TWIN 2X 2,5 -10 BU 3200836 450 BLUEMARK MAG AI-WM 2,5 5146640 175
A 1,5 -15 3202591 444 AI 1,5 - 8 BK 3200043 445 AI-TWIN 2X 2,5 -13 BU 3200878 450 BLUEMARK MAG EM-M (100X60) 0802742 231

A 1,5 -18 3202601 444 AI 1,5 - 8 BK -1000 3200917 445 AI-TWIN 2X 4 -12 GY 3201000 450 BLUEMARK MAG EM-M (27X15) 0802736 231
A 2,5 - 7 3200289 444 AI 1,5 - 8 BK-B 3201398 479 AI-TWIN 2X 6 -14 YE 3201013 450 BLUEMARK MAG EM-M (27X18) 0802737 231
A 2,5 -12 3200292 444 AI 1,5 - 8 BK-GB-1000 3202892 448 AI-TWIN 2X10 -14 RD 3201026 450 BLUEMARK MAG EM-M (49X15) 0802738 231
A 2,5 -18 3202821 444 AI 1,5 - 8 RD 3201136 447 AI-TWIN 2X16 -16 BU 3202847 450 BLUEMARK MAG EM-M (60X15) 0802739 231

A 4 -9 3200302 444 AI 1,5 - 8 RD-B 3201592 479 AI-TWIN 2X0,75-8 BU 3240668 450 BLUEMARK MAG EM-M (60X30) 0802740 231
A 4 -12 3200315 444 AI 1,5 -10 BK 3200195 445 AI-TWIN 2X1-12 RD 3240679 450 BLUEMARK MAG EM-M (85,6X54) 0802741 231
A 4 -18 3202834 444 AI 1,5 -10 BK-GB-1000 1208872 448 AI-TWIN 2X2,5-10 GY 3240669 450 BLUEMARK MAG WM-M (29X8) 0802743 161
A 6 -10 3202520 444 AI 1,5 -12 BK 3201482 445 AI-TWIN SORTI BOX BU 3202986 452 BLUEMARK MAG WM-M (40X15) 0802744 161

A6 -12 3200328 444 AI 1,5 -18 BK 3200056 445 AI-TWIN SORTI BOX GY 3202999 452 BLUEMARK MAG WM-M (60X15) 0802746 161
A 10 -12 3200331 444 AI 2,5 - 8 BU 3200522 445 AI-WM 0,5-8 WH 3240542 175 BLUEMARK MAG WM-M (D30) 0802747 161
A 10 -18 3200344 444 AI 2,5 - 8 BU -1000 3200920 445 AI-WM 0,75-8 GY 3240543 175 BMK 15X 9 YE 5031605 293
A 16 -12 3200425 444 AI 2,5 - 8 BU-B 3201408 479 AI-WM 1,5-8 WH 3240545 175 BMK 15X 9 YE CUS 0824229 293

A 25 -12 3200357 444 AI 2,5 - 8 GY 3200069 446 AI-WM 1-8 RD 3240544 175 BMK 19X11 YE 5031582 293
A 25 -15 3200360 444 AI 2,5 - 8 GY-B 3201550 479 AI-WM 2,5-8 BU 3240572 175 BMK 19X11 YE CUS 0824230 293
A 25 -18 3200373 444 AI 2,5 -10 BU 3202533 445 AI-XL 1,5- 8 BK 3201916 449 BMK 20X 8 WH 0805470 293
A 25 -20 3200386 444 AI 2,5 -12 BU 3200962 445 AI-XL 1,5-10 BK 3201974 449 BMK 20X 8 WH CUS 0824231 293

A 35 -18 3200399 444 AI 2,5 -12 GY 3200205 446 AI-XL 2,5- 8 BU 3201929 449 BMK 20X 8 YE 5031388 293
A 35 -20 3200409 444 AI 2,5 -18 BU 3200580 445 AI-XL 2,5-12 BU 3201987 449 BMK 20X 8 YE CUS 0824232 293
A/U CM 5021110 505 AI 2,5 -18 GY 3200072 446 AI-XL 4 -10 GY 3201932 449 BMK 38X11 YE 5031676 293
AB-SK 3025341 525 AI 4 -10 GY 3200535 445 AI-XL 6 -12 YE 3201945 449 BMK 38X11 YE CUS 0824233 293

AB-SK 65 3026489 525 AI 4 -10 OG 3200085 446 AI-XL 10 -12 RD 3201958 449 BMKL 12X12 WH 5032361 292
AB-SK 65-D 3026900 527 AI 4 -12 GY 3200959 445 AI-XL 16 -12 BU 3201961 449 BMKL 12X12 WH CUS 0824238 292
AB-SK 65-D INSULATED 3040889 527 AI 4 -12 OG 3200438 446 AI120 -27 BU 3201822 445 BMKL 15X 9 WH 0803663 292
AB-SK TOP 3062090 524 AI 4 -18 GY 3200593 445 AK 4 0404017 510 BMKL 15X 9 WH CUS 0824239 292

AB-SK TOP INSULATED 3062074 524 AI 4 -18 OG 3200098 446 AK 16 0404033 511 BMKL 15X 9 YE 5032497 292
AB-SK-D TOP 3062100 526 AI 6 -12 BK 3201107 447 AK 35 0404046 511 BMKL 15X 9 YE CUS 0824240 292
AB-SK-D TOP INSULATED 3062087 527 AI 6 -12 GN 3200108 446 AKG 4 BK 0421032 510 BMKL 16X 6 YE 0807096 292
AB-SK/E 3026476 530 AI 6 -12 YE 3200548 445 AKG 4 BU 0421016 510 BMKL 16X 6 YE CUS 0824241 292

AB-SK/E-NS 35 3213111 530 AI 6 -18 GN 3200111 446 AKG 4 GNYE 0421029 510 BMKL 18X 6 WH 5032293 292
AB-SKS 60 3240223 525 AI 6 -18 YE 3200603 445 AKG 16 BK 0423030 511 BMKL 18X 6 WH CUS 0824242 292
AB/NS 1201141 503 AI 0,25-8 BU-B 3240250 479 AKG 16 BU 0423014 511 BMKL 18X 6,5 OG 5036147 292
AB/SKS 3240224 528 AI 0,25-8 YE-B 3240251 479 AKG 16 GNYE 0423027 511 BMKL 18X 6,5 OG CUS 0824243 292

AB/SS 0404428 508 AI 0,34-8 TQ-B 3240249 479 AKG 35 BK 0424039 511 BMKL 18X 8 WH 5032329 292
AB/SS-M 3025888 528 AI 0,5-10 WH-GB 3203150 448 AKG 35 BU 0424013 511 BMKL 18X 8 WH CUS 0824244 292
AB2/SS 0404431 508 AI 0,5-8 WH-B 3000 3240663 451 AKG 35 GNYE 0424026 511 BMKL 18X 8 YE 5032170 292
AB3/SS 0800086 508 AI 0,75-10 GY-GB 3203163 448 AP 2 CM 5022889 505 BMKL 18X 8 YE CUS 0824245 292

ABN 2/SS 0404460 508 AI 0,75-8 GY-B 3000 3240664 451 AP 2-TU 5022630 505 BMKL 19X11 YE 0800705 292
AH-ME 3240265 504 AI 1,0-8 RD-S 1212523 390 AP 3 CM 5022876 505 BMKL 19X11 YE CUS 0824246 292
AI 0,25- 6 BU 3203040 447 AI 1,5-8 BK-B 2500 3240666 451 AP 3-TNS 35 5022672 505 BMKL 20X 8 WH 5032280 292
AI 0,25- 6 YE 3203024 445 AI 1,5-8 BK-S 1212524 391 AP 3-TU 5022656 505 BMKL 20X 8 WH CUS 0824247 292

AI 0,25- 8 YE 3203037 445 AI 1-8 RD-B 3000 3240665 451 AP-ES 5022685 505 BMKL 20X 8 YE 5032138 292
AI 0,25-12 BU 3200632 447 AI 10 -12 BN 3200124 446 AP-ME METER 3034361 504 BMKL 20X 8 YE CUS 0824248 292
AI 0,34- 6 TQ 3203053 447 AI 10 -12 IV 3201068 447 AP-ME CM 3034345 504 BMKL 25X 8 WH 5032332 292
AI 0,34- 8 TQ 3203066 447 AI 10 -12 RD 3200551 445 APH-ME 3034374 504 BMKL 25X 8 WH CUS 0824249 292

AI 0,34-12 TQ 3200645 447 AI 10 -18 BN 3200137 446 APK 1 5022795 507 BMKL 25X12 WH 5032374 292
AI 0,5 - 6 OG 3201301 447 AI 10 -18 RD 3200616 445 APK-HP 2 METER 5022818 507 BMKL 25X12 WH CUS 0824250 292
AI 0,5 - 6 WH 3200687 445 AI 16 -12 BU 3200564 445 APK-TU 5022805 507 BMKL 26,8X6,8 WH 0807106 292
AI 0,5 - 8 OG 3201123 447 AI 16 -12 GN 3201152 447 APT-ME 3034358 504 BMKL 26,8X6,8 WH CUS 0824251 292

AI 0,5 - 8 OG-B 3201563 479 AI 16 -12 IV 3201181 446 ASD BIT SET HN 1209952 443 BMKL 26X10 YE 0811516 292
AI 0,5 - 8 WH 3200014 445 AI 16 -18 BU 3200629 445 AZK 35 0702997 509 BMKL 26X10 YE CUS 0824252 292
AI 0,5 - 8 WH -1000 3200881 445 AI 16 -18 GN 3201330 447 BMKL 27X 8 SR 0803702 292
AI 0,5 - 8 WH-B 3201369 479 AI 2,5-8 BU-B 1500 3240667 451 BMKL 27X 8 SR CUS 0824253 292

AI 0,5 - 8 WH-GB 1208966 448 AI 25 -16 BK 3200412 446 BMKL 27X12,5 SR 0803676 292
AI 0,5 -10 WH 3201275 445 AI 25 -16 BN 3201084 447 BMKL 27X12,5 SR CUS 0824254 292
AI 0,5 -12 WH 3200506 445 AI 25 -16 YE 3200577 445 BMKL 27X18 SR 0803689 292
AI 0,75- 6 GY 3200690 445 AI 25 -18 YE 3201505 445 B BMKL 27X18 SR CUS 0824255 292

AI 0,75- 6 WH 3201314 447 AI 25 -22 BK 3200739 446 B-STIFT 1051993 49 BMKL 27X27 SR 0803692 292
AI 0,75- 8 BU 3200027 446 AI 25 -22 YE 3200700 445 BF 6,3 1209936 424 BMKL 27X27 SR CUS 0824256 292
AI 0,75- 8 BU-B 3201547 479 AI 35 -16 BE 3201071 447 BG/F 1201060 502 BMKL 50X12 WH 5032387 292
AI 0,75- 8 GY 3200519 445 AI 35 -16 RD 3200441 445 BG/F 1 1201112 502 BMKL 50X12 WH CUS 0824257 292

598 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Index
Alphabetical

Type Order No. Page Type Order No. Page Type Order No. Page Type Order No. Page

BMKL 64X16 WH 0821807 292 C-RC 16/M5 DIN 3240094 454 C-SCF 1,5/6,3X0,8 3240156 462 CD 25X60 3240191 545
BMKL 64X16 WH CUS 0824259 292 C-RC 16/M6 DIN 3240095 454 C-SCF 1/2,8X0,5 3240152 462 CD 25X60 BU 3240303 545
BMKL 64X16 YE 0821810 292 C-RC 16/M8 DIN 3240096 454 C-SCF 1/2,8X0,8 3240153 462 CD 25X60 WH 3240618 545
BMKL 64X16 YE CUS 0824260 292 C-RC 185/M10 DIN 3240131 455 C-SCF 2,5/4,8X0,5 3240157 462 CD 25X80 3240197 545

BMKL 64X34 WH 5032400 292 C-RC 185/M12 DIN 3240132 455 C-SCF 2,5/4,8X0,8 3240158 462 CD 25X80 BU 3240304 545
BMKL 64X34 WH CUS 0824261 292 C-RC 185/M16 DIN 3240133 455 C-SCF 2,5/6,3X0,8 3240159 462 CD 25X80 WH 3240619 545
C-RC 2,5/M10 DIN 3240082 454 C-SCF 6/6,3X0,8 3240160 462 CD 30X100 3240283 545
C-RC 2,5/M3 DIN 3240076 454 C-SCFFI 1,5/2,8X0,5 3240534 464 CD 30X100 BU 3240308 545

C-RC 2,5/M3,5 DIN 3240077 454 C-SCFFI 1,5/2,8X0,8 3240535 464 CD 30X100 WH 3240623 545
C-RC 2,5/M4 DIN 3240078 454 C-SCFFI 1,5/4,8X0,5 3240536 464 CD 30X40 3240278 545
C-RC 2,5/M5 DIN 3240079 454 C-SCFFI 1,5/4,8X0,8 3240537 464 CD 30X40 BU 3240305 545
C C-RC 2,5/M6 DIN 3240080 454 C-SCFFI 1,5/6,3X0,8 3240538 464 CD 30X40 WH 3240620 545

C-BCI 1,5/2,8 3240015 461 C-RC 2,5/M8 DIN 3240081 454 C-SCFFI 2,5/4,8X0,5 3240539 464 CD 30X60 3240280 545
C-BCI 1,5/4,6 3240568 461 C-RC 240/M10 DIN 3240134 455 C-SCFFI 2,5/4,8X0,8 3240540 464 CD 30X60 BU 3240306 545
C-BCI 2,5/2,8 3240046 461 C-RC 240/M12 DIN 3240135 455 C-SCFFI 2,5/6,3X0,8 3240547 464 CD 30X60 WH 3240621 545
C-BCI 2,5/4,6 3240569 461 C-RC 240/M16 DIN 3240136 455 C-SCFFI 6/6,3X0,8 3240541 464 CD 30X80 3240282 545

C-BCI 6/2,8 3240047 461 C-RC 25/M10 DIN 3240102 454 C-SCFI 1,5/2,8X0,5 3240048 463 CD 30X80 BU 3240307 545
C-BCI 6/4,6 3240570 461 C-RC 25/M12 DIN 3240103 454 C-SCFI 1,5/2,8X0,8 3240049 463 CD 30X80 WH 3240622 545
C-BCSI 1,5/9X2,8 3240531 461 C-RC 25/M16 DIN 3240104 454 C-SCFI 1,5/4,8X0,5 3240050 463 CD 40X100 3240294 545
C-BCSI 2,5/9X2,8 3240532 461 C-RC 25/M5 DIN 3240099 454 C-SCFI 1,5/4,8X0,8 3240051 463 CD 40X100 BU 3240312 545

C-BCSI 6/10X2,8 3240546 461 C-RC 25/M6 DIN 3240100 454 C-SCFI 1,5/6,3X0,8 3240052 463 CD 40X100 WH 3240627 545
C-BCSI 6/18X4,5 3240533 461 C-RC 25/M8 DIN 3240101 454 C-SCFI 2,5/4,8X0,5 3240053 463 CD 40X40 3240189 545
C-FC 1,5/M3 3240137 458 C-RC 35/M10 DIN 3240107 454 C-SCFI 2,5/4,8X0,8 3240054 463 CD 40X40 BU 3240309 545
C-FC 1,5/M3,5 3240138 458 C-RC 35/M12 DIN 3240108 454 C-SCFI 2,5/6,3X0,8 3240055 463 CD 40X40 WH 3240624 545

C-FC 1,5/M4 3240139 458 C-RC 35/M16 DIN 3240109 454 C-SCFI 6/6,3X0,8 3240056 463 CD 40X60 3240192 545
C-FC 1,5/M5 3240140 458 C-RC 35/M6 DIN 3240105 454 C-SCFMI 1,5/6,3X0,8 3240529 464 CD 40X60 BU 3240310 545
C-FC 1,5/M6 3240141 458 C-RC 35/M8 DIN 3240106 454 C-SCFMI 2,5/6,3X0,8 3240530 464 CD 40X60 WH 3240625 545
C-FC 2,5/M3 3240142 458 C-RC 50/M10 DIN 3240112 454 C-SCM 1,5/6,3X0,8 3240161 462 CD 40X80 3240198 545

C-FC 2,5/M3,5 3240143 458 C-RC 50/M12 DIN 3240113 454 C-SCM 2,5/6,3X0,8 3240162 462 CD 40X80 BU 3240311 545
C-FC 2,5/M4 3240144 458 C-RC 50/M16 DIN 3240114 454 C-SCMI 1,5/6,3X0,8 3240058 463 CD 40X80 WH 3240626 545
C-FC 2,5/M5 3240145 458 C-RC 50/M6 DIN 3240110 454 C-SCMI 2,5/6,3X0,8 3240059 463 CD 60X100 3240263 545
C-FC 2,5/M6 3240146 458 C-RC 50/M8 DIN 3240111 454 C-SCMI 6/6,3X0,8 3240060 463 CD 60X100 BU 3240316 545

C-FC 2,5/M8 3240147 458 C-RC 6/M10 DIN 3240087 454 CARRIER-EMLP 22 (27X12,5) 0828985 297 CD 60X100 WH 3240631 545
C-FC 6/M4 3240148 458 C-RC 6/M12 DIN 3240088 454 CARRIER-EMLP 22 (27X15) 0828986 297 CD 60X40 3240190 545
C-FC 6/M5 3240149 458 C-RC 6/M4 DIN 3240083 454 CARRIER-EMLP 22 (27X18) 0828987 297 CD 60X40 BU 3240313 545
C-FC 6/M6 3240150 458 C-RC 6/M5 DIN 3240084 454 CARRIER-EMLP 22 (27X27) 0828988 297 CD 60X40 WH 3240628 545

C-FC 6/M8 3240151 458 C-RC 6/M6 DIN 3240085 454 CARRIER-EMLP 22 (27X8) 0828984 297 CD 60X60 3240193 545
C-FCI 1,5/M3 3240032 459 C-RC 6/M8 DIN 3240086 454 CARRIER-EMP (1000X15) COVER 0829520 298 CD 60X60 BU 3240314 545
C-FCI 1,5/M3,5 3240033 459 C-RC 70/M10 DIN 3240117 454 CARRIER-EMP (1000X15) GY 0829366 298 CD 60X60 WH 3240629 545
C-FCI 1,5/M4 3240034 459 C-RC 70/M6 DIN 3240115 454 CARRIER-EMP (1000X15) TR 0829530 298 CD 60X80 3240199 545

C-FCI 1,5/M5 3240035 459 C-RC 70/M8 DIN 3240116 454 CARRIER-EMP (17X15) 0827450 296 CD 60X80 BU 3240315 545
C-FCI 1,5/M6 3240036 459 C-RC 95/M10 DIN 3240121 454 CARRIER-EMP (27X15) 0827451 296 CD 60X80 WH 3240630 545
C-FCI 2,5/M3 3240037 459 C-RC 95/M12 DIN 3240122 454 CARRIER-EMP (49X15) 0827452 296 CD 80X100 3240264 545
C-FCI 2,5/M3,5 3240038 459 C-RC 95/M8 DIN 3240120 454 CARRIER-EMP (60X15) 0827453 296 CD 80X100 BU 3240321 545

C-FCI 2,5/M4 3240039 459 C-RCEI 1,5/M3 3241201 457 CARRIER-EMP (60X30) 0827454 296 CD 80X100 WH 3240636 545
C-FCI 2,5/M5 3240040 459 C-RCEI 1,5/M3,5 3241202 457 CARRIER-EMP (85,6X54) 0829365 296 CD 80X25 3240281 545
C-FCI 2,5/M6 3240041 459 C-RCEI 1,5/M4 3241203 457 CARRIER-EMP 22 (27X12,5) 0827446 296 CD 80X25 BU 3240317 545
C-FCI 6/M4 3240042 459 C-RCEI 1,5/M5 3241204 457 CARRIER-EMP 22 (27X15) 0827447 296 CD 80X25 WH 3240632 545

C-FCI 6/M5 3240043 459 C-RCEI 1,5/M6 3241205 457 CARRIER-EMP 22 (27X18) 0827448 296 CD 80X40 3240335 545
C-FCI 6/M6 3240044 459 C-RCEI 2,5/M3,5 3241206 457 CARRIER-EMP 22 (27X27) 0827449 296 CD 80X40 BU 3240318 545
C-FCI 6/M8 3240045 459 C-RCEI 2,5/M4 3241207 457 CARRIER-EMP 22 (27X8) 0827445 296 CD 80X40 WH 3240633 545
C-JCI 1,5 3240061 465 C-RCEI 2,5/M5 3241208 457 CARRIER-TM 300 0828282 110 CD 80X60 3240194 545

C-JCI 2,5 3240062 465 C-RCEI 2,5/M6 3241209 457 CARRIER-TMD 300 0828693 110 CD 80X60 WH 3240634 545
C-JCI 6 3240063 465 C-RCEI 2,5/M8 3241210 457 CARRIER-TMH 300 0830670 110 CD 80X80 3240200 545
C-PCEI 1,5/2 3241215 460 C-RCEI 6/M10 3241214 457 CARRIER/L-EMP (1000X15) GY 0829559 298 CD 80X80 BU 3240320 545
C-PCEI 2,5/2 3241216 460 C-RCEI 6/M5 3241211 457 CARRIER/L-EMP (1000X15) TR 0829560 298 CD 80X80 WH 3240635 545

C-PCEI 6/2 3241217 460 C-RCEI 6/M6 3241212 457 CD 100X100 3240205 545 CD COVER 100 3240289 545
C-PCI 1,5/2 3240064 460 C-RCEI 6/M8 3241213 457 CD 100X100 BU 3240325 545 CD COVER 100 BU 3240328 545
C-PCI 2,5/2 3240066 460 C-RCI 1,5/M3 3240016 456 CD 100X100 WH 3240640 545 CD COVER 100 WH 3240643 545
C-PCI 6/2,7 3240068 460 C-RCI 1,5/M3,5 3240017 456 CD 100X40 3240279 545 CD COVER 120 3240290 545

C-RC 1/M2,5 DIN 3240069 454 C-RCI 1,5/M4 3240018 456 CD 100X40 BU 3240322 545 CD COVER 120 BU 3240329 545
C-RC 1/M3 DIN 3240070 454 C-RCI 1,5/M5 3240019 456 CD 100X40 WH 3240637 545 CD COVER 120 WH 3240644 545
C-RC 1/M3,5 DIN 3240071 454 C-RCI 1,5/M6 3240020 456 CD 100X60 3240195 545 CD COVER 25 3240285 545
C-RC 1/M4 DIN 3240072 454 C-RCI 10/M10 3240222 456 CD 100X60 BU 3240323 545 CD COVER 25 BU 3240330 545

C-RC 1/M5 DIN 3240073 454 C-RCI 10/M5 3240219 456 CD 100X60 WH 3240638 545 CD COVER 25 WH 3240645 545
C-RC 1/M6 DIN 3240074 454 C-RCI 10/M6 3240220 456 CD 100X80 3240201 545 CD COVER 30 3240295 545
C-RC 1/M8 DIN 3240075 454 C-RCI 10/M8 3240221 456 CD 100X80 BU 3240324 545 CD COVER 30 BU 3240331 545
C-RC 10/M10 DIN 3240092 454 C-RCI 2,5/M3 3240021 456 CD 100X80 WH 3240639 545 CD COVER 30 WH 3240646 545

C-RC 10/M12 DIN 3240093 454 C-RCI 2,5/M3,5 3240022 456 CD 120X60 3240196 545 CD COVER 40 3240286 545
C-RC 10/M5 DIN 3240089 454 C-RCI 2,5/M4 3240023 456 CD 120X60 BU 3240326 545 CD COVER 40 BU 3240332 545
C-RC 10/M6 DIN 3240090 454 C-RCI 2,5/M5 3240024 456 CD 120X60 WH 3240641 545 CD COVER 40 WH 3240647 545
C-RC 10/M8 DIN 3240091 454 C-RCI 2,5/M6 3240025 456 CD 120X80 3240202 545 CD COVER 60 3240287 545

C-RC 120/M10 DIN 3240125 455 C-RCI 2,5/M8 3240026 456 CD 120X80 BU 3240327 545 CD COVER 60 BU 3240333 545
C-RC 120/M12 DIN 3240126 455 C-RCI 6/M10 3240031 456 CD 120X80 WH 3240642 545 CD COVER 60 WH 3240648 545
C-RC 120/M8 DIN 3240124 455 C-RCI 6/M4 3240027 456 CD 25X25 3240187 545 CD COVER 80 3240288 545
C-RC 150/M10 DIN 3240128 455 C-RCI 6/M5 3240028 456 CD 25X25 BU 3240301 545 CD COVER 80 BU 3240334 545

C-RC 150/M12 DIN 3240129 455 C-RCI 6/M6 3240029 456 CD 25X25 WH 3240616 545 CD COVER 80 WH 3240649 545
C-RC 150/M16 DIN 3240130 455 C-RCI 6/M8 3240030 456 CD 25X40 3240188 545 CD WR 3240284 543
C-RC 16/M10 DIN 3240097 454 C-SCF 1,5/4,8X0,5 3240154 462 CD 25X40 BU 3240302 545 CD-HF 100X100 3240364 543
C-RC 16/M12 DIN 3240098 454 C-SCF 1,5/4,8X0,8 3240155 462 CD 25X40 WH 3240617 545 CD-HF 100X40 3240361 543

PHOENIX CONTACT 599

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Index
Alphabetical

Type Order No. Page Type Order No. Page Type Order No. Page Type Order No. Page

CD-HF 100X60 3240362 543 CES-LTPG-GY-26 0801699 538 CF 1000-10-TOOLKIT 4/10-12 1212458 481 CMS-P1-PLOTTER-COVER 5144806 44
CD-HF 100X80 3240363 543 CES-LTPG-GY-27 0801700 538 CF 1000-10-TOOLKIT 6/12 1212459 481 CMS-P1-PLOTTER-KIT 5144628 44
CD-HF 120X60 3240365 543 CES-LTPG-GY-28 0801701 538 CF 1000-COVER 1208306 480 CMS-P1-PREPLATES 5145135 44
CD-HF 120X80 3240366 543 CES-LTPG-GY-29 0801702 538 CF 1000-TOOLKIT 0,34/ 6 1208212 480 CMS-P1-WMU-ADAPTER 5144822 46

CD-HF 25X25 3240340 543 CES-LTPG-GY-30 0801703 538 CF 1000-TOOLKIT 0,34/ 8 1208225 480 CMS-PEN 0,25 5067815 47
CD-HF 25X40 3240341 543 CES-LTPG-GY-31 0801705 538 CF 1000-TOOLKIT 2,5/ 8 1208241 480 CMS-PEN 0,35 5067828 47
CD-HF 25X60 3240342 543 CES-LTPG-GY-32 0801706 538 CF 1000-TOOLKIT 4,0/10 1208270 480 CMS-PEN 0,50 5067831 47
CD-HF 25X80 3240343 543 CES-LTPG-GY-33 0801707 538 CF 3000 AB 0,25 1212380 478 CMS-R-FLUID-TR-C2 5146752 47

CD-HF 30X100 3240347 543 CES-SFFS-H 0801728 535 CF 3000 AM 0,5 1205587 478 CMS-R-SET-TR 5146751 47
CD-HF 30X40 3240344 543 CES-SRC-BK 0801718 536 CF 3000 AM 0,75 1205590 478 CRIMPFOX 10 1212721 395
CD-HF 30X60 3240345 543 CES-SRG-BK 0801670 536 CF 3000 AM 1,0 1205600 478 CRIMPFOX 10S 1212045 396
CD-HF 30X80 3240346 543 CES-SRG-BK-10 0801620 536 CF 3000 AM 1,5 1205613 478 CRIMPFOX 2,5-M 1212719 392

CD-HF 40X100 3240351 543 CES-SRG-BK-11 0801618 536 CF 3000 AM 2,5 1205626 478 CRIMPFOX 25R 1212039 397
CD-HF 40X40 3240348 543 CES-SRG-BK-12 0801617 536 CF 3000 LOC 0,25 1212377 478 CRIMPFOX 25R/DIE 1212040 397
CD-HF 40X60 3240349 543 CES-SRG-BK-13 0801616 536 CF 3000 LOC 0,5 1205639 478 CRIMPFOX 50R 1212041 397
CD-HF 40X80 3240350 543 CES-SRG-BK-14 0801615 536 CF 3000 LOC 0,75 1205642 478 CRIMPFOX 50R/DIE 1212042 397

CD-HF 60X100 3240355 543 CES-SRG-BK-15 1410563 536 CF 3000 LOC 1,0 1205655 478 CRIMPFOX 6 1212034 393
CD-HF 60X40 3240352 543 CES-SRG-BK-16 1410576 536 CF 3000 LOC 1,5 1205668 478 CRIMPFOX 6-M 1212720 393
CD-HF 60X60 3240353 543 CES-SRG-BK-17 1410589 536 CF 3000 LOC 2,5 1205671 478 CRIMPFOX 6/DIE 1212035 393
CD-HF 60X80 3240354 543 CES-SRG-BK-1ASI-L 1410042 537 CF 3000-2,5 1205477 478 CRIMPFOX 6H 1212046 396

CD-HF 80X100 3240360 543 CES-SRG-BK-1ASI-R 0801667 537 CF 3000-2,5 120V 1205516 478 CRIMPFOX 6S-F 1212043 393
CD-HF 80X25 3240356 543 CES-SRG-BK-2 0801635 536 CF 3000-TOOLKIT 0,25 1212376 478 CRIMPFOX 6T 1212037 394
CD-HF 80X40 3240357 543 CES-SRG-BK-2ASI-LL 1410055 537 CF 500-120V 1208351 474 CRIMPFOX 6T-F 1212038 395
CD-HF 80X60 3240358 543 CES-SRG-BK-2ASI-LR 0801669 537 CF 500-230V 1208348 474 CRIMPFOX MT 2,5 1204038 411

CD-HF 80X80 3240359 543 CES-SRG-BK-2ASI-RR 0801668 537 CF 500/COV 1212250 474 CRIMPFOX MT 2,5 DIE 1208050 411
CD-HF COVER 100 3240367 543 CES-SRG-BK-2X3 1410398 537 CF 500/COV AI 6 1212254 474 CRIMPFOX-C 10P/DIE 1212739 415
CD-HF COVER 120 3240368 543 CES-SRG-BK-2X4 1410408 537 CF 500/COV AI TWIN 1212266 474 CRIMPFOX-C D 1212734 414
CD-HF COVER 25 3240369 543 CES-SRG-BK-2X5 0801657 537 CF 500/COV FBS 1212462 474 CRIMPFOX-C MMJ/DIE 1212740 415

CD-HF COVER 30 3240370 543 CES-SRG-BK-2X6 0801664 537 CF 500/COV RC 10 1212252 474 CRIMPFOX-C RJ11/DIE 1212735 415
CD-HF COVER 40 3240371 543 CES-SRG-BK-2X7 1410084 537 CF 500/COV RCI 1212255 474 CRIMPFOX-C RJ22/DIE 1212736 415
CD-HF COVER 60 3240372 543 CES-SRG-BK-2X8 1410097 537 CF 500/COV RCT 2,5 1212253 474 CRIMPFOX-C RJ45/DIE 1212737 415
CD-HF COVER 80 3240373 543 CES-SRG-BK-2X9 1410411 537 CF 500/COV SC 1212251 474 CRIMPFOX-C RJ45U/DIE 1212738 415

CES-B10-HFFS-PLBK 0801663 534 CES-SRG-BK-3 0801633 536 CF 500/DIE AI 6 1212238 475 CRIMPFOX-C120 1212318 403
CES-B10-SF-PLBK 0801655 535 CES-SRG-BK-4 0801632 536 CF 500/DIE AI 25 1212239 475 CRIMPFOX-C120 AI 50/F-DIE 1212337 403
CES-B10-SFC-M 0801645 535 CES-SRG-BK-4X3 0801665 537 CF 500/DIE AI 50 1212261 475 CRIMPFOX-C120 AI 70/F-DIE 1212338 403
CES-B10-SFFS-PLBK 0801660 535 CES-SRG-BK-4X4 0801666 537 CF 500/DIE AI-TWIN 10 1212262 475 CRIMPFOX-C120 AI 70/M-DIE 1212335 403

CES-B10-WRG-BK 0801725 534 CES-SRG-BK-4X5 1410107 537 CF 500/DIE FBS 1212461 475 CRIMPFOX-C120 AI 95/F-DIE 1212339 403
CES-B16-HFFS-PLBK 0801662 534 CES-SRG-BK-4X6 1410152 537 CF 500/DIE RC 10 1212244 475 CRIMPFOX-C120 AI 95/M-DIE 1212336 403
CES-B16-SF-PLBK 0801651 535 CES-SRG-BK-5 0801630 536 CF 500/DIE RC 16 1212257 475 CRIMPFOX-C120 R25-50/DIE 1212324 403
CES-B16-SFC-M 0801642 535 CES-SRG-BK-6 0801628 536 CF 500/DIE RCI 1,5 1212263 475 CRIMPFOX-C120 R35-70/DIE 1212325 403

CES-B16-SFFS-PLBK 0801659 535 CES-SRG-BK-7 0801627 536 CF 500/DIE RCI 6 1212240 475 CRIMPFOX-C120 R95/DIE 1212326 403
CES-B16-WRG-BK 0801726 534 CES-SRG-BK-8 0801625 536 CF 500/DIE SC 1,5 1212241 475 CRIMPFOX-C120 RC 35/F-DIE 1212332 403
CES-B24-HFFS-PLBK 0801661 534 CES-SRG-BK-9 0801622 536 CF 500/DIE SC 6 1212242 475 CRIMPFOX-C120 RC 50/F-DIE 1212333 403
CES-B24-SF-PLBK 0801647 535 CES-STPG-GY 0801715 538 CF 500/DIE TC 4 1212237 475 CRIMPFOX-C120 RC 70/F-DIE 1212334 403

CES-B24-SFC-M 0801641 535 CES-STPG-GY-10 0801682 538 CF 500/DIE TC 10 1212260 475 CRIMPFOX-C120 RC 70/M-DIE 1212331 403
CES-B24-SFFS-PLBK 0801658 535 CES-STPG-GY-11 0801683 538 CF 500/LOC SCF 2,8/1,5 1212249 474 CRIMPFOX-C120 RCI 10/DIE 1212327 403
CES-B24-WRG-BK 0801727 534 CES-STPG-GY-12 0801684 538 CF 500/LOC SCF 4,8/2,5 1212248 474 CRIMPFOX-C120 RCI 16/DIE 1212328 403
CES-LRC-BK 0801719 536 CES-STPG-GY-13 0801685 538 CF 500/LOC SCF 6,3/6 1212247 474 CRIMPFOX-C120 RCI 25/DIE 1212329 403

CES-LRG-BK 0801671 536 CES-STPG-GY-14 0801686 538 CF 500/LOC SCM 6,3/2,5 1212264 474 CRIMPFOX-C120 RCI 35/DIE 1212330 403
CES-LRG-BK-15 0801619 536 CES-STPG-GY-15 1410521 538 CF CRIMPHANDY 1,0 1212465 390 CRIMPFOX-C120 RCT 120-1/DIE 1212323 403
CES-LRG-BK-16 0801621 536 CES-STPG-GY-16 1410534 538 CF CRIMPHANDY 1,5 1212466 391 CRIMPFOX-C120 RCT 35-1/DIE 1212320 403
CES-LRG-BK-17 0801624 536 CES-STPG-GY-17 1410547 538 CF CRIMPHANDY/ACCU 1212518 390 CRIMPFOX-C120 RCT 50-1/DIE 1212321 403

CES-LRG-BK-18 0801626 536 CES-STPG-GY-1ASI-L 1410068 539 CF CRIMPHANDY/CHARGER 1212519 390 CRIMPFOX-C120 RCT 70-1/DIE 1212319 403
CES-LRG-BK-19 0801629 536 CES-STPG-GY-1ASI-R 0801712 539 CF-10 CUTTER KNIFE SET 1207284 470 CRIMPFOX-C120 RCT 95-1/DIE 1212322 403
CES-LRG-BK-20 0801631 536 CES-STPG-GY-2 0801672 538 CF-10 WHEEL SET 1207271 470 CRIMPFOX-C50 1212340 403
CES-LRG-BK-21 0801634 536 CES-STPG-GY-2ASI-LL 1410071 539 CLIP-PROJECT ADVANCED 5146040 26 CRIMPFOX-C50 R25-35/DIE 1212349 403

CES-LRG-BK-22 0801637 536 CES-STPG-GY-2ASI-LR 0801714 539 CLIP-PROJECT PROFESSIONAL 5146053 27 CRIMPFOX-C50 R35-50/DIE 1212350 403
CES-LRG-BK-23 0801638 536 CES-STPG-GY-2ASI-RR 0801713 539 CLIPFIX 15 3022263 498 CRIMPFOX-C50 R50-70/DIE 1212351 403
CES-LRG-BK-24 0801639 536 CES-STPG-GY-2X3 1410424 539 CLIPFIX 35 3022218 498 CRIMPFOX-C50 RC 25/F-DIE 1212344 403
CES-LRG-BK-25 0801640 536 CES-STPG-GY-2X4 1410438 539 CLIPFIX 35-5 3022276 498 CRIMPFOX-C50 RC 35/F-DIE 1212345 403

CES-LRG-BK-26 0801643 536 CES-STPG-GY-2X5 0801708 539 CMS-DISPOSABLE-PEN 0,25 TR 5146685 47 CRIMPFOX-C50 RC 35/M-DIE 1212343 403
CES-LRG-BK-27 0801644 536 CES-STPG-GY-2X6 0801709 539 CMS-DISPOSABLE-PEN 0,35 TR 5146686 47 CRIMPFOX-C50 RCI 10/DIE 1212346 403
CES-LRG-BK-28 0801646 536 CES-STPG-GY-2X7 1410110 539 CMS-INK-TR-C5 5146684 47 CRIMPFOX-C50 RCI 16/DIE 1212347 403
CES-LRG-BK-29 0801648 536 CES-STPG-GY-2X8 1410123 539 CMS-P1-M/BN-ZB 5144725 46 CRIMPFOX-C50 RCI 25/DIE 1212348 403

CES-LRG-BK-30 0801650 536 CES-STPG-GY-2X9 1410440 539 CMS-P1-M/GPE 5144754 46 CRIMPFOX-C50 RCT 35-1/DIE 1212341 403
CES-LRG-BK-31 0801653 536 CES-STPG-GY-3 0801673 538 CMS-P1-M/GPE ENGRAVING 5145711 46 CRIMPFOX-C50 RCT 50-1/DIE 1212342 403
CES-LRG-BK-32 0801654 536 CES-STPG-GY-4 0801674 538 CMS-P1-M/GPE-PAD 5144880 46 CRIMPFOX-CATV 8,23 1212716 409
CES-LRG-BK-33 0801656 536 CES-STPG-GY-4X3 0801710 539 CMS-P1-M/LBHZ 5144738 46 CRIMPFOX-CATV 8,23-1 1212717 409

CES-LTPG-GY 0801716 538 CES-STPG-GY-4X4 0801711 539 CMS-P1-M/PAB 5144741 46 CRIMPFOX-CX 10,54 1212097 408
CES-LTPG-GY-15 0801687 538 CES-STPG-GY-4X5 1410136 539 CMS-P1-M/SS-ZB 5144712 46 CRIMPFOX-CX 10,90 1212098 408
CES-LTPG-GY-16 0801688 538 CES-STPG-GY-4X6 1410149 539 CMS-P1-M/ZB 5144699 46 CRIMPFOX-CX 10,90-1 1212715 408
CES-LTPG-GY-17 0801689 538 CES-STPG-GY-5 0801675 538 CMS-P1-M/ZBF 5144709 46 CRIMPFOX-CX 4,52 1212094 408

CES-LTPG-GY-18 0801690 538 CES-STPG-GY-6 0801676 538 CMS-P1-M/ZBFM 5144686 46 CRIMPFOX-CX 4,52-M 1212713 408
CES-LTPG-GY-19 0801691 538 CES-STPG-GY-7 0801677 538 CMS-P1-M/ZBFM-PAD 5144848 46 CRIMPFOX-CX 5,41-M 1212712 408
CES-LTPG-GY-20 0801692 538 CES-STPG-GY-8 0801679 538 CMS-P1-M/ZBM 5144660 46 CRIMPFOX-CX 6,48 1212095 408
CES-LTPG-GY-21 0801693 538 CES-STPG-GY-9 0801680 538 CMS-P1-PAD 5144819 46 CRIMPFOX-CX 6,48-M 1212714 408

CES-LTPG-GY-22 0801695 538 CF 1000 EM 1205215 480 CMS-P1-PAD/SPARE 5144893 46 CRIMPFOX-CX 7,06 HD-M 1212718 408
CES-LTPG-GY-23 0801696 538 CF 1000-1,5 1208199 480 CMS-P1-PENDEPOT 5144835 44 CRIMPFOX-CX 9,14 1212096 408
CES-LTPG-GY-24 0801697 538 CF 1000-10 1212456 481 CMS-P1-PLOTTER 5144615 44 CRIMPFOX-DSUB 5 1212111 409
CES-LTPG-GY-25 0801698 538 CF 1000-10-TOOLKIT 10/12 1212460 481 CMS-P1-PLOTTER-CASE 5144631 44 CRIMPFOX-DSUB 5-1 1212711 409

600 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Index
Alphabetical

Type Order No. Page Type Order No. Page Type Order No. Page Type Order No. Page

CRIMPFOX-FO 5,41 1212099 409 CUTFOX 12 1212128 364 EML (10X7)R CUS 0824290 272 EML (70X32)R SR CUS 0824341 273
CRIMPFOX-HS 6 1212722 399 CUTFOX 16 VDE 1212126 367 EML (10X7)R YE 0816676 271 EML (70X32)R YE 0817073 271
CRIMPFOX-M 1212072 412 CUTFOX 18 1212129 364 EML (10X7)R YE CUS 0824291 273 EML (70X32)R YE CUS 0824342 273
CRIMPFOX-M 10/DIE 1212080 413 CUTFOX 25 1212130 365 EML (15X9)R 0815677 270 EML (70X50)R 0817099 270

CRIMPFOX-M 25/DIE 1212081 413 CUTFOX 25 VDE 1212127 367 EML (15X9)R CUS 0824294 272 EML (70X50)R CUS 0824343 272
CRIMPFOX-M 50/DIE 1212082 413 CUTFOX 35 1212131 365 EML (15X9)R SR 0816032 271 EML (70X50)R SR 0817086 271
CRIMPFOX-M CX-1/DIE 1212087 413 CUTFOX 45 1212132 364 EML (15X9)R SR CUS 0824295 273 EML (70X50)R SR CUS 0824344 273
CRIMPFOX-M CX-2/DIE 1212088 413 CUTFOX 50 STEEL 1212526 364 EML (15X9)R YE 0816045 271 EML (76,2X6,5)RL YE 0816207 271

CRIMPFOX-M CX-3/DIE 1212089 413 CUTFOX 52 1212133 364 EML (15X9)R YE CUS 0824296 273 EML (76,2X6,5)RL YE CUS 0824345 273
CRIMPFOX-M CX-4/DIE 1212745 413 CUTFOX 62 1212134 365 EML (16,5X5)R 0816702 270 EML (90X5)R 0817109 270
CRIMPFOX-M CX-5/DIE 1212746 413 CUTFOX FB 1205985 366 EML (16,5X5)R CUS 0824297 272 EML (90X5)R CUS 0824346 272
CRIMPFOX-M CX-6/DIE 1212747 413 CUTFOX-CD 1212474 371 EML (16,5X5)R YE 0816728 271 EML (D17,5)R 0815774 270

CRIMPFOX-M CX-7/DIE 1212748 413 CUTFOX-ES 1212621 364 EML (16,5X5)R YE CUS 0824298 273 EML (D17,5)R CUS 0824347 272
CRIMPFOX-M CX-8/DIE 1212749 413 CUTFOX-FBS 1212124 366 EML (16,5X5)RL 0816113 270 EML (100X40)R 0800286 270
CRIMPFOX-M HS-1/DIE 1212282 413 CUTFOX-LB VDE 1212527 367 EML (16,5X5)RL YE 0816126 271 EML (100X40)R CUS 0802698 272
CRIMPFOX-M HS/DIE 1219092 413 CUTFOX-S VDE 1212207 367 EML (16X7)R 0818001 270 EML (100X40)R SR 0802697 271

CRIMPFOX-M RC 10-1/DIE 1212744 413 CUTFOX-SP VDE 1212206 367 EML (16X7)R CUS 0824301 272 EML (100X40)R SR CUS 0828993 273
CRIMPFOX-M RC 10/DIE 1212077 413 EML (16X7)R YE 0816731 271 EML (15X6) R YE 0819288 271
CRIMPFOX-M RC 2,5/DIE 1212078 413 EML (16X7)R YE CUS 0824302 273 EML (15X6) R YE CUS 0824348 273
CRIMPFOX-M RC 6/DIE 1212079 413 EML (17,5X8)R 0816744 270 EML (18X7)RL YE 0802733 271

CRIMPFOX-M RCI 2,5/DIE 1212074 413 EML (17,5X8)R CUS 0824303 272 EML (18X7)RL YE CUS 0802734 273
CRIMPFOX-M RCI 6/DIE 1212073 413 EML (17,5X8)R YE 0816757 271 EML (24X3)R 0830291 109
CRIMPFOX-M RJ11/DIE 1212091 413 EML (17,5X8)R YE CUS 0824304 273 EML (24X4)R 0800061 109
CRIMPFOX-M RJ45/DIE 1212090 413 D EML (17,5X8)RL YE 0816139 271 EML (25,4X12,7)RL 0816087 270

CRIMPFOX-M SC 1/DIE 1212083 413 DUSPOL EXPERT 1209091 434 EML (19X6)R 0816760 270 EML (40X6)R 0830481 213
CRIMPFOX-M SC 2,5/DIE 1212084 413 EML (19X6)R CUS 0824306 272 EML (40X6)R YE 0830482 213
CRIMPFOX-M SC 6-FL/DIE 1212741 413 EML (20X7)R YE 0816773 271 EML (40X6)R CUS 0830487 213
CRIMPFOX-M SC 6/DIE 1212085 413 EML (20X7)R YE CUS 0824308 273 EML (40X6)R YE CUS 0830488 213

CRIMPFOX-M SCA 2,5-1/DIE 1212743 413 EML (20X8)R 0816786 270 EML (50X10)R 0830483 213
CRIMPFOX-M SCA 2,5/DIE 1212742 413 EML (20X8)R CUS 0824309 272 EML (50X10)R CUS 0830489 213
CRIMPFOX-M SET 1212093 412 EML (20X8)R YE 0816799 271 EML (50X10)R YE 0830484 213
CRIMPFOX-M SR 6-1/DIE 1212471 413 E EML (20X8)R YE CUS 0824310 273 EML (50X10)R YE CUS 0830490 213

CRIMPFOX-M SR 6-2/DIE 1212472 413 E/AL-NS 35 1201662 499 EML (21,5X21,5)R SR 0816812 271 EML (75X10)R 0830485 213
CRIMPFOX-M SR 6-3/DIE 1212473 413 E/MBK 1401637 499 EML (21,5X21,5)R SR CUS 0824312 273 EML (75X10)R CUS 0830491 213
CRIMPFOX-M TC 10/DIE 1212076 413 E/MK 1 1421659 499 EML (25,4X12,7)R 0816825 270 EML (75X10)R YE 0830486 213
CRIMPFOX-M TC 4/DIE 1212075 413 E/NS 35 N 0800886 499 EML (25,4X12,7)R CUS 0824313 272 EML (75X10)R YE CUS 0830492 213

CRIMPFOX-RC 10 1212061 401 E/UK 1201442 498 EML (25,4X12,7)R YE 0816838 271 EML-ESD (15X15)R 0830566 284
CRIMPFOX-RC 2,5 1212063 400 E/UK 1 1201413 498 EML (25,4X12,7)R YE CUS 0824314 273 EML-ESD (15X15)R CUS 0830590 285
CRIMPFOX-RC 2,5-M 1212723 400 EA 4 0805360 506 EML (26,5X12)R SR 0816854 271 EML-ESD (15X15)RL-T 0830578 285
CRIMPFOX-RC 25 1212065 401 EA 5 1024014 506 EML (26,5X12)R SR CUS 0824315 273 EML-ESD (15X6)R 0830565 284

CRIMPFOX-RC 6 1212710 401 EA 5-WS 1024085 506 EML (26,5X17,5)R SR 0816883 271 EML-ESD (15X6)R CUS 0830589 285
CRIMPFOX-RC 6-M 1212724 400 EA 7 1024250 506 EML (26,5X17,5)R SR CUS 0824318 273 EML-ESD (15X6)RL-T 0830577 285
CRIMPFOX-RCI 1 1212055 398 EA 11 1024263 506 EML (26,5X17,5)R YE 0816896 271 EML-ESD (20X7)R 0830567 284
CRIMPFOX-RCI 1-M 1212727 398 EC 10 3240176 515 EML (26,5X17,5)R YE CUS 0824319 273 EML-ESD (20X7)R CUS 0830591 285

CRIMPFOX-RCI 2,5 1212053 398 EC 10 BK 3240177 515 EML (26,5X18,5)R SR 0816906 271 EML-ESD (20X7)RL-T 0830579 285
CRIMPFOX-RCI 2,5-M 1212728 398 EC 16 3240179 515 EML (26,5X18,5)R SR CUS 0824320 273 EML-ESD (24X4)R 0830568 284
CRIMPFOX-RCI 6 1212057 399 EC 16 BK 3240180 515 EML (26,5X26,5)R SR 0816919 271 EML-ESD (24X4)R CUS 0830592 285
CRIMPFOX-RCI 6-1 1212059 399 EC 16 P TR 3240182 513 EML (26,5X26,5)R SR CUS 0824321 273 EML-ESD (24X4)RL-T 0830580 285

CRIMPFOX-RCI 6-M 1212730 399 EC 2,5 P TR 3240167 512 EML (26,5X7,5)R SR 0816841 271 EML-ESD (25,4X12,7)R 0830570 284
CRIMPFOX-RCI DIN 6 1212729 399 EC 25 3240183 515 EML (26,5X7,5)R SR CUS 0824322 273 EML-ESD (25,4X12,7)R CUS 0830594 285
CRIMPFOX-RCT 16 1212731 402 EC 25 BK 3240184 515 EML (30X20)R 0816922 270 EML-ESD (25,4X12,7)RL-T 0830582 285
CRIMPFOX-RCT 25-1 1212066 402 EC 4 3240168 514 EML (30X20)R CUS 0824323 272 EML-ESD (25X8)R 0830569 284

CRIMPFOX-RCT 70 1212732 402 EC 4 BK 3240169 514 EML (30X20)R YE 0816935 271 EML-ESD (25X8)R CUS 0830593 285
CRIMPFOX-SC 1,5 1212048 404 EC 4 P TR 3240171 513 EML (30X20)R YE CUS 0824324 273 EML-ESD (25X8)RL-T 0830581 285
CRIMPFOX-SC 1,5-M 1212725 404 EC 6 3240172 514 EML (37XE)RL TR 0815716 270 EML-ESD (32X10)R 0830571 284
CRIMPFOX-SC 1,5/DIE 1212049 404 EC 6 BK 3240173 514 EML (38,1X19)RL 0816171 270 EML-ESD (32X10)R CUS 0830595 285

CRIMPFOX-SC 6 1212050 405 EC 6 P TR 3240175 513 EML (38,1X19)RL CUS 0824327 272 EML-ESD (32X10)RL-T 0830583 285
CRIMPFOX-SC 6/DIE 1212051 405 EK 116 0401010 509 EML (38X17)R 0816951 270 EML-ESD (35X6,5)R 0830572 284
CRIMPFOX-SC 6L 1212052 405 EK 135 0401023 509 EML (38X17)R CUS 0824328 272 EML-ESD (35X6,5)R CUS 0830596 285
CRIMPFOX-SCA 2,5-M 1212726 405 EM-DUO 120/15 5600461 519 EML (40X15)R SR 0815729 271 EML-ESD (35X6,5)RL-T 0830584 285

CRIMPFOX-SR 6-1 1212467 410 EM-DUO/120/15/GFI 5600462 519 EML (40X15)R SR CUS 0824329 273 EML-ESD (40X15)R 0830573 284
CRIMPFOX-SR 6-2 1212468 410 EMG 45-SD-D/LA/SI 2943738 518 EML (40X25)R 0818027 270 EML-ESD (40X15)R CUS 0830597 285
CRIMPFOX-SR 6-3 1212469 410 EMG 45-SD-D/LA/SI YE 2940825 518 EML (40X25)R CUS 0824330 272 EML-ESD (40X15)RL-T 0830585 285
CRIMPFOX-TC 10 1212114 406 EMG 90-2SD-D/LA 2941523 518 EML (40X25)R YE 0816977 271 EML-ESD (45X5)R 0830574 284

CRIMPFOX-TC 10/DIE 1212296 406 EML (100X73)R 0817125 270 EML (40X25)R YE CUS 0824331 273 EML-ESD (45X5)R CUS 0830598 285
CRIMPFOX-TC 4 1212113 406 EML (100X73)R CUS 0824282 272 EML (40X8)R 0816980 270 EML-ESD (45X5)RL-T 0830586 285
CRIMPFOX-TC 4/DIE 1212295 406 EML (100X73)R SR 0817112 271 EML (40X8)R CUS 0824332 272 EML-ESD (50X10)R 0830575 284
CRIMPFOX-TC MP 1212510 407 EML (100X73)R SR CUS 0824283 273 EML (50,8X25,4)RL 0816184 270 EML-ESD (50X10)R CUS 0830599 285

CRIMPFOX/ SPR-1 1212069 392 EML (100X73)R YE 0817138 271 EML (50,8X25,4)RL CUS 0824333 272 EML-ESD (50X10)RL-T 0830587 285
CRIMPFOX/ SPR-3 1212036 393 EML (100X73)R YE CUS 0824284 273 EML (51X25)R 0817028 270 EML-ESD (8X8)R 0830564 284
CRIMPFOX/SPR-2 1212047 396 EML (100X90)R 0817154 270 EML (51X25)R CUS 0824335 272 EML-ESD (8X8)R CUS 0830588 285
CRIMPSET 6 1202072 441 EML (100X90)R CUS 0824285 272 EML (51X25)R SR 0817002 271 EML-ESD (8X8)RL-T 0830576 285

CRIMPSET 6/25 LEER 1204041 441 EML (100X90)R SR 0817141 271 EML (51X25)R SR CUS 0824336 273 EML-HA (100X73)R 0830731 280
CRIMPSET 25 1202580 441 EML (100X90)R SR CUS 0824286 273 EML (51X25)R YE 0817031 271 EML-HA (100X73)R CUS 0830739 281
CUTFOX 10 1206829 470 EML (100XE)RL SR 0815787 271 EML (51X25)R YE CUS 0824337 273 EML-HA (100X73)R SR 0830735 281
CUTFOX 10 120V 1206832 470 EML (101,6X25,4)RL SR 0815790 271 EML (69,8X31,8)RL 0816197 270 EML-HA (100X73)R SR CUS 0830743 281

CUTFOX 10 BAR 1208416 470 EML (101,6X25,4)RL SR CUS 0824288 273 EML (69,8X31,8)RL CUS 0824339 272 EML-HA (100X90)R 0830732 280
CUTFOX 10 C-UN 1208393 470 EML (10X4)R 0815583 270 EML (70X32)R 0817060 270 EML-HA (100X90)R CUS 0830740 281
CUTFOX 10 R-C 1208403 470 EML (10X4)R CUS 0824289 272 EML (70X32)R CUS 0824340 272 EML-HA (100X90)R SR 0830736 281
CUTFOX 100 1212135 365 EML (10X7)R 0816663 270 EML (70X32)R SR 0817057 271 EML-HA (100X90)R SR CUS 0830744 281

PHOENIX CONTACT 601

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Index
Alphabetical

Type Order No. Page Type Order No. Page Type Order No. Page Type Order No. Page

EML-HA (15X9)R 0830600 280 EML-HT (45X5)R CUS 0830166 283 EMLP (17,5X12)R 0819466 274 EMLP-AL (60X30) 0830513 231
EML-HA (15X9)R CUS 0830622 281 EML-HT (45X5)RL-T 0830661 283 EMLP (17,5X12)R CUS 0824355 274 EMLP-AL (60X30) CUS 0830521 231
EML-HA (15X9)R SR 0830611 281 EML-HT (50X10)R 0800338 282 EMLP (17,5X15)R 0802684 274 EMLP-AL (85,6X54) 0830514 231
EML-HA (15X9)R SR CUS 0830633 281 EML-HT (50X10)R CUS 0830167 283 EMLP (17,5X15)R CUS 0802690 274 EMLP-AL (85,6X54) CUS 0830522 231

EML-HA (19X6)R 0830601 280 EML-HT (50X10)RL-T 0830662 283 EMLP (17,5X15)R SR 0802685 274 EMLPR (100X30) 0800362 301
EML-HA (19X6)R CUS 0830623 281 EML-HT (8X8)R 0800340 282 EMLP (17,5X15)R SR CUS 0802691 274 EMLPR (26,5X14,5) 0800546 297
EML-HA (19X6)R SR 0830612 281 EML-HT (8X8)R CUS 0830169 283 EMLP (17X7)R 0826844 274 EMLPR (26,5X17,5) 0800360 297
EML-HA (19X6)R SR CUS 0830634 281 EML-HT (8X8)RL-T 0830651 283 EMLP (17X7)R CUS 0827083 274 EMLPR (26,5X26,5) 0800361 297

EML-HA (20X20)R 0830602 280 EML-HT (D12)R 0801376 282 EMLP (20X7)R 0819479 274 EMLPR (30X40) 0800359 301
EML-HA (20X20)R CUS 0830624 281 EML-RM (15X15)R 0830530 286 EMLP (20X7)R CUS 0824356 274 EMLPR (80X42) 0800357 301
EML-HA (20X20)R SR 0830613 281 EML-RM (15X15)R CUS 0830554 287 EMLP (20X8)R 0819482 274 EMLPR (80X60) 0800358 301
EML-HA (20X20)R SR CUS 0830635 281 EML-RM (15X15)RL-T 0830542 287 EMLP (20X8)R CUS 0824357 274 EMLS (15X9)R SR 0800347 288

EML-HA (26,5X12)R 0830603 280 EML-RM (15X6)R 0830529 286 EMLP (22X12)R 0819495 274 EMLS (15X9)R SR CUS 0830175 289
EML-HA (26,5X12)R CUS 0830625 281 EML-RM (15X6)R CUS 0830553 287 EMLP (22X12)R CUS 0824358 274 EMLS (19X6)R SR 0800343 288
EML-HA (26,5X12)R SR 0830614 281 EML-RM (15X6)RL-T 0830541 287 EMLP (22X22)R SR 0825528 274 EMLS (19X6)R SR CUS 0830171 289
EML-HA (26,5X12)R SR CUS 0830636 281 EML-RM (20X7)R 0830531 286 EMLP (22X22)R SR CUS 0827475 274 EMLS (20X20)R SR 0800344 288

EML-HA (40X15)R 0830605 280 EML-RM (20X7)R CUS 0830555 287 EMLP (27X12,5)R SR 0819521 274 EMLS (20X20)R SR CUS 0830172 289
EML-HA (40X15)R CUS 0830627 281 EML-RM (20X7)RL-T 0830543 287 EMLP (27X12,5)R SR CUS 0824359 274 EMLS (26,5X12)R SR 0800353 288
EML-HA (40X15)R SR 0830616 281 EML-RM (24X4)R 0830532 286 EMLP (27X18)R SR 0819534 274 EMLS (26,5X12)R SR CUS 0830179 289
EML-HA (40X15)R SR CUS 0830638 281 EML-RM (24X4)R CUS 0830556 287 EMLP (27X18)R SR CUS 0824360 274 EMLS (38,1X19)R SR 0800354 288

EML-HA (40X8)R 0830604 280 EML-RM (24X4)RL-T 0830544 287 EMLP (27X27)R SR 0827467 274 EMLS (38,1X19)R SR CUS 0830180 289
EML-HA (40X8)R CUS 0830626 281 EML-RM (25,4X12,7)R 0830534 286 EMLP (27X27)R SR CUS 0827469 274 EMLS (40X15)R SR 0800345 288
EML-HA (40X8)R SR 0830615 281 EML-RM (25,4X12,7)R CUS 0830558 287 EMLP (27X8)R SR 0819518 274 EMLS (40X15)R SR CUS 0830173 289
EML-HA (40X8)R SR CUS 0830637 281 EML-RM (25,4X12,7)RL-T 0830546 287 EMLP (27X8)R SR CUS 0824361 274 EMLS (40X8)R SR 0800348 288

EML-HA (51X25)R 0830729 280 EML-RM (25X8)R 0830533 286 EMLP (45X15)R 0801820 274 EMLS (40X8)R SR CUS 0830176 289
EML-HA (51X25)R CUS 0830737 281 EML-RM (25X8)R CUS 0830557 287 EMLP (45X15)R CUS 0828990 274 EMLS (60X30)R SR 0800355 288
EML-HA (51X25)R SR 0830733 281 EML-RM (25X8)RL-T 0830545 287 EMLP (45X15)R SR 0819547 274 EMLS (60X30)R SR CUS 0830181 289
EML-HA (51X25)R SR CUS 0830741 281 EML-RM (32X10)R 0830535 286 EMLP (45X15)R SR CUS 0824362 274 EMLS (70X150)R SR 0800351 288

EML-HA (60X30)R 0830606 280 EML-RM (32X10)R CUS 0830559 287 EMLP (45X25)R 0802727 274 EMLS (70X150)R SR CUS 0830178 289
EML-HA (60X30)R CUS 0830628 281 EML-RM (32X10)RL-T 0830547 287 EMLP (45X25)R CUS 0802730 274 EMLS (70X32)R SR 0800346 288
EML-HA (60X30)R SR 0830617 281 EML-RM (35X6,5)R 0830536 286 EMLP (60X30)R 0819505 274 EMLS (70X32)R SR CUS 0830174 289
EML-HA (60X30)R SR CUS 0830639 281 EML-RM (35X6,5)R CUS 0830560 287 EMLP (60X30)R CUS 0824363 274 EMLS (76X51)R SR 0800350 288

EML-HA (70X150)R 0830608 280 EML-RM (35X6,5)RL-T 0830548 287 EMLP (60X30)R SR 0801729 274 EMLS (76X51)R SR CUS 0830177 289
EML-HA (70X150)R CUS 0830630 281 EML-RM (40X15)R 0830537 286 EMLP (60X30)R SR CUS 0830398 274 EMLS (85X32)R SR 0800356 288
EML-HA (70X150)R SR 0830619 281 EML-RM (40X15)R CUS 0830561 287 EMLP (65X25)R 0802728 274 EMLS (85X32)R SR CUS 0830182 289
EML-HA (70X150)R SR CUS 0830641 281 EML-RM (40X15)RL-T 0830549 287 EMLP (65X25)R CUS 0802731 274 EMP-AL (27X15) 0830776 233

EML-HA (70X32)R 0830607 280 EML-RM (45X5)R 0830538 286 EMLP (EX15)R 0802686 275 EMP-AL (27X15) CUS 0830798 233
EML-HA (70X32)R CUS 0830629 281 EML-RM (45X5)R CUS 0830562 287 EMLP (EX15)R CUS 0802692 275 EMP-AL (27X18) 0830777 233
EML-HA (70X32)R SR 0830618 281 EML-RM (45X5)RL-T 0830550 287 EMLP (EX15)R SR 0802687 275 EMP-AL (27X18) CUS 0830799 233
EML-HA (70X32)R SR CUS 0830640 281 EML-RM (50X10)R 0830539 286 EMLP (EX15)R SR CUS 0802694 275 EMP-AL (49X15) 0830778 233

EML-HA (70X50)R 0830730 280 EML-RM (50X10)R CUS 0830563 287 EMLP (EX30)R 0802688 275 EMP-AL (49X15) CUS 0830800 233
EML-HA (70X50)R CUS 0830738 281 EML-RM (50X10)RL-T 0830551 287 EMLP (EX30)R CUS 0802695 275 EMP-AL (60X15) 0830779 233
EML-HA (70X50)R SR 0830734 281 EML-RM (8X8)R 0830528 286 EMLP (EX30)R SR 0802689 275 EMP-AL (60X15) CUS 0830801 233
EML-HA (70X50)R SR CUS 0830742 281 EML-RM (8X8)R CUS 0830552 287 EMLP (EX30)R SR CUS 0802696 275 EMP-AL (60X30) 0830796 233

EML-HA (76X51)R 0830609 280 EML-RM (8X8)RL-T 0830540 287 EMLP 24 (30X12) 0822301 295 EMP-AL (60X30) CUS 0830802 233
EML-HA (76X51)R CUS 0830631 281 EMLC (5,5X20)R 0817617 279 EMLP 24 (30X12) BK 0822314 295 EMP-AL (85,6X54) 0830797 233
EML-HA (76X51)R SR 0830620 281 EMLC (5,5X20)R CUS 0824350 279 EMLP 24 (30X12) BK CUS 0824365 295 EMP-AL (85,6X54) CUS 0830803 233
EML-HA (76X51)R SR CUS 0830642 281 EMLC (5,5X40)R 0817620 279 EMLP 24 (30X12) CUS 0824364 295 EMPPR (27X15) 0829535 297

EML-HA (85X32)R 0830610 280 EMLC (5,5X40)R CUS 0824351 279 EMLP 24 (30X12) SR 0822330 295 EMPPR (27X18) 0829536 297
EML-HA (85X32)R CUS 0830632 281 EMLC (15X9)R YE 0800236 279 EMLP 24 (30X12) SR CUS 0824366 295 EMSP-AL (39X15) 0830510 232
EML-HA (85X32)R SR 0830621 281 EMLC (15X9)R YE CUS 0830158 279 EMLP 24 (30X12)R 0819550 276 EMSP-AL (39X15) CUS 0830518 232
EML-HA (85X32)R SR CUS 0830643 281 EMLC (17,5X8)R YE 0800237 279 EMLP 24 (30X12)R CUS 0824367 276 EMSP-AL (50X15) 0830773 232

EML-HT (15X15)R 0800341 282 EMLC (17,5X8)R YE CUS 0830159 279 EMLP 24 (30X12)R GN 0819589 276 EMSP-AL (50X15) CUS 0830775 232
EML-HT (15X15)R CUS 0830170 283 EMLC (20X8)R 0815680 279 EMLP 24 (30X12)R GN CUS 0824368 276 EMSP-AL (50X30) 0830502 232
EML-HT (15X15)RL-T 0830653 283 EMLC (20X8)R CUS 0824352 279 EMLP 24 (30X12)R RD 0819576 276 EMSP-AL (50X30) CUS 0830505 232
EML-HT (15X6)R 0830644 282 EMLC (20X8)R YE 0800235 279 EMLP 24 (30X12)R RD CUS 0824369 276 EMSP-AL (75,6X54) 0830503 232

EML-HT (15X6)R CUS 0830663 283 EMLC (20X8)R YE CUS 0830157 279 EMLP 24 (30X12)R SR 0819563 276 EMSP-AL (75,6X54) CUS 0830506 232
EML-HT (15X6)RL-T 0830652 283 EMLC (20X8)RL YE 0815800 279 EMLP 24 (30X12)R SR CUS 0824370 276 EMSP-AL (90X60) 0830504 232
EML-HT (20X7)R 0830645 282 EMLC (25,4X12,7)R YE 0800238 279 EMLP 30(45X10)R 0801855 277 EMSP-AL (90X60) CUS 0830507 232
EML-HT (20X7)R CUS 0830664 283 EMLC (25,4X12,7)R YE CUS 0830160 279 EMLP 30(45X10)R BK 0801858 277 EMT (10X4)R 0816235 208

EML-HT (20X7)RL-T 0830654 283 EMLC (25X8)R YE 0800240 279 EMLP 30(45X10)R BK CUS 0802009 277 EMT (10X4)R CUS 0824374 208
EML-HT (24X4)R 0830646 282 EMLC (25X8)R YE CUS 0830161 279 EMLP 30(45X10)R CUS 0802007 277 EMT (15X4)R 0817329 208
EML-HT (24X4)R CUS 0830665 283 EMLC (38X17)R YE 0800557 279 EMLP 30(45X10)R YE 0801857 277 EMT (15X4)R BU 0817332 208
EML-HT (24X4)RL-T 0830655 283 EMLC (38X17)R YE CUS 0830164 279 EMLP 30(45X10)R YE CUS 0802008 277 EMT (15X4)R BU CUS 0824376 208

EML-HT (25,4X12,7)R 0830648 282 EMLC (40X8)R 0800554 279 EMLP 32 (38X14) 0822291 295 EMT (15X4)R CUS 0824375 208
EML-HT (25,4X12,7)R CUS 0830667 283 EMLC (40X8)R CUS 0830162 279 EMLP 32 (38X14) BK 0822327 295 EMT (15X4)R RD 0816249 208
EML-HT (25,4X12,7)RL-T 0830657 283 EMLC (40X8)R YE 0800555 279 EMLP 32 (38X14) BK CUS 0824372 295 EMT (15X4)R RD CUS 0824377 208
EML-HT (25X8)R 0830647 282 EMLC (40X8)R YE CUS 0830163 279 EMLP 32 (38X14) CUS 0824371 295 EMT (15X4)R YE 0817358 208

EML-HT (25X8)R CUS 0830666 283 EMLC (51X25)R YE 0800558 279 EMLP 32 (38X14) SR 0822343 295 EMT (15X4)R YE CUS 0824378 208
EML-HT (25X8)RL-T 0830656 283 EMLC (51X25)R YE CUS 0830165 279 EMLP 32 (38X14) SR CUS 0824373 295 EMT (23X4)R 0817361 208
EML-HT (32X10)R 0830649 282 EMLF (108XE)R 0800549 278 EMLP-AL (100X60) 0830515 231 EMT (23X4)R CUS 0824379 208
EML-HT (32X10)R CUS 0830668 283 EMLF (108XE)R CUS 0830183 278 EMLP-AL (100X60) CUS 0830523 231 EMT (23X4)R YE 0817374 208

EML-HT (32X10)RL-T 0830658 283 EMLF (108XE)R SR 0800551 278 EMLP-AL (27X15) 0830508 231 EMT (23X4)R YE CUS 0824380 208
EML-HT (35X6,5)R 0830650 282 EMLF (108XE)R SR CUS 0830185 278 EMLP-AL (27X15) CUS 0830516 231 EMT (24X4)R 0816265 208
EML-HT (35X6,5)R CUS 0830669 283 EMLF (108XE)R TR 0800552 278 EMLP-AL (27X18) 0830509 231 EMT (24X4)R CUS 0824381 208
EML-HT (35X6,5)RL-T 0830659 283 EMLF (108XE)R TR CUS 0830186 278 EMLP-AL (27X18) CUS 0830517 231 EMT (25X6)R 0817264 208

EML-HT (40X15)R 0800339 282 EMLF (108XE)R YE 0800550 278 EMLP-AL (49X15) 0830511 231 EMT (25X6)R CUS 0824382 208
EML-HT (40X15)R CUS 0830168 283 EMLF (108XE)R YE CUS 0830184 278 EMLP-AL (49X15) CUS 0830519 231 EMT (29X8)R 0817277 208
EML-HT (40X15)RL-T 0830660 283 EMLP (13X9)R 0819453 274 EMLP-AL (60X15) 0830512 231 EMT (29X8)R CUS 0824383 208
EML-HT (45X5)R 0800337 282 EMLP (13X9)R CUS 0824354 274 EMLP-AL (60X15) CUS 0830520 231 EMT (29X8)R YE 0817280 208

602 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Index
Alphabetical

Type Order No. Page Type Order No. Page Type Order No. Page Type Order No. Page

EMT (29X8)R YE CUS 0824384 208 GPE 20X 8 WH 0806945 294 KMK 2 1005266 215 NS 35/15 CAP 1206573 503
EMT (40X17)R 0817293 208 GPE 20X 8 WH CUS 0824417 294 KMK 3 1005211 217 NS 35/15 CU UNPERF 2000MM 1201895 493
EMT (40X17)R CUS 0824385 208 GPE 22X12 WH 0806929 294 KMK 4 1005305 215 NS 35/15 PERF 755MM 1207679 494
EMT (103X17)R 0800039 291 GPE 22X12 WH CUS 0824418 294 KMK 5 0830746 215 NS 35/15 PERF 955MM 1207682 494

EMT (103X17)R CUS 0830238 291 GPE 22X22 SR/R 0806628 294 KMV 0806644 223 NS 35/15 PERF 1155MM 1207695 494
EMT (103X17)R TQ 0800041 291 GPE 22X22 SR/R CUS 0824419 294 KMV 44X9,6 0812007 223 NS 35/15 PERF 2000MM 1201730 494
EMT (103X17)R TQ CUS 0830239 291 GPE 27X 8 SR/R 0806877 294 KMV 44X9,6 CUS 0828494 223 NS 35/15 PERF/... 1208160 494
EMT (103X17)R YE 0800436 291 GPE 27X 8 SR/R CUS 0824420 294 KMV CUS 0828493 223 NS 35/15 UNPERF 2000MM 1201714 492

EMT (103X17)R YE CUS 0830240 291 GPE 27X 8 WH/R 0815198 294 NS 35/15 UNPERF/... 1208144 492
EMT (103X23)R 0800040 291 GPE 27X 8 WH/R CUS 0824421 294 NS 35/15 UNPERF/SO/... 1208157 492
EMT (103X23)R CUS 0830241 291 GPE 27X12,5 SR/R 0806880 294 NS 35/15 WH PERF 2000MM 0806602 495
EMT (103X23)R TQ 0800042 291 GPE 27X12,5 SR/R CUS 0824422 294 L NS 35/15 WH UNPERF 2000MM 1204135 492

EMT (103X23)R TQ CUS 0830242 291 GPE 27X18 SR/R 0806893 294 LM 1004377 217 NS 35/15 ZN PERF 2000MM 1206599 495
EMT (103X23)R YE 0800437 291 GPE 27X18 SR/R CUS 0824423 294 NS 35/15 ZN UNPERF 2000MM 1206586 493
EMT (103X23)R YE CUS 0830243 291 GPE 27X18 WH/R 0815208 294 NS 35/15-2,3 UNPERF 2000MM 1201798 493
EMT (31X12,5)R GY 0801612 291 GPE 27X18 WH/R CUS 0824424 294

EMT (31X12,5)R GY CUS 0830390 291 GPE 27X27 SR/R 0806903 294
EMT (35X28)R 0801602 290 GPE 27X27 SR/R CUS 0824425 294
EMT (35X28)R CUS 0830391 290 GPE 28X17,5 SR 0807889 294
EMT (35X28)R YE 0801603 290 GPE 28X17,5 SR CUS 0824426 294 M P
EMT (35X28)R YE CUS 0830392 290 GPE 45X14 SR/R 0807009 294 MARKING BOX 5147100 40 P-PEN 0815211 48
EMT (35X46)R 0801604 290 GPE 45X14 SR/R CUS 0824427 294 MARKING BOX DE CH 0801749 40 P-PEN ADAPTER 0815224 48
EMT (35X46)R CUS 0830393 290 GPE 45X14 WH/R 0815282 294 MARKING BOX DK DK 0801741 40 P-SS-ZB 100 1013737 298
EMT (35X46)R YE 0801605 290 GPE 45X14 WH/R CUS 0824428 294 MARKING BOX EN 5147101 40 P-ZB METER 1051854 298

EMT (35X46)R YE CUS 0830394 290 GPE 52X26 WH 0806958 294 MARKING BOX EN BE 0801742 40 P1 ENGRAVING UNIT 5145546 45
EMT (50/28X13)R 0800049 291 GPE 52X26 WH CUS 0824429 294 MARKING BOX ES ES 0801747 40 P1 ENGRAVING VC BAG 5145559 45
EMT (50/28X13)R CUS 0830245 291 GPE 60X12 RD-WH 0824202 294 MARKING BOX FR FR 0801590 40 P1 GRAVER 0.2 5145478 45
EMT (50/28X13)R TQ 0800050 291 GPE 60X12 RD-WH CUS 0827720 294 MARKING BOX HU HU 0801750 40 P1 GRAVER 0.3 5145481 45

EMT (50/28X13)R TQ CUS 0830246 291 GPE 60X12 SR/R 0806631 294 MARKING BOX IT IT 0801745 40 P1 GRAVER 0.4 5145494 45
EMT (50/28X13)R YE 0800438 291 GPE 60X12 SR/R CUS 0824430 294 MARKING BOX PL US 0801744 40 P1 GRAVER 0.5 5145504 45
EMT (50/28X13)R YE CUS 0830247 291 GPE 60X12 WH/R 0807630 294 MARKING BOX PT PT 0801748 40 P1 GRAVER 0.7 5145517 45
EMT (50X26)R 0800052 291 GPE 60X12 WH/R CUS 0824431 294 MARKING BOX RU RU 0801739 40 P1 GRAVER 1.0 5145520 45

EMT (50X26)R CUS 0830248 291 GPE 60X30 WH 0806961 294 MARKING BOX SE SE 0801740 40 P1 GRAVER SET 5145533 45
EMT (50X26)R TQ 0800053 291 GPE 60X30 WH CUS 0824432 294 MICROFOX-E 1212494 375 P1 UC-MAG 1 5146079 46
EMT (50X26)R TQ CUS 0830249 291 GPE 60X30 WH/R 0815292 294 MICROFOX-E ESD 1212485 377 P1 UC-MAG 2 5146082 46
EMT (50X26)R YE 0800054 291 GPE 60X30 WH/R CUS 0824433 294 MICROFOX-EO 1212495 375 P1 UC-MAG 3 5146095 46

EMT (50X26)R YE CUS 0830250 291 GPE 70X32 YE 0824215 294 MICROFOX-F 1212493 375 P1 UC-MAG 4 5146105 46
EMT (60X15)R 0801846 208 GPE 70X32 YE CUS 0827721 294 MICROFOX-F ESD 1212484 377 P1 UC-MAG 5 5146118 46
EMT (60X15)R CUS 0801998 208 MICROFOX-P 1212491 375 P1 UC-MAG 6 5146121 46
EMT (62X10)R 0800057 290 MICROFOX-P ESD 1212482 377 P1 UC-MAG 7 5146568 46

EMT (62X10)R CUS 0830251 290 MICROFOX-PC 1212492 375 PAB-KTL 1013261 225
EMT (62X10)R YE 0800477 290 MICROFOX-PC ESD 1212483 377 PAB-KTL 23 1013957 225
EMT (62X10)R YE CUS 0830252 290 MICROFOX-R 1212490 375 PAB-SK 15 1013287 299
EMT (62X46)R 0800059 290 J MICROFOX-R ESD 1212481 377 PAB-SK 30 1013290 299

EMT (62X46)R CUS 0830253 290 JBC 2,5/3 3240164 516 MICROFOX-S ESD 1212480 376 PABL 15X4 0808260 208
EMT (62X46)R YE 0800478 290 JBC 2,5/5 3240165 517 MICROFOX-SB 1212489 374 PABL 15X4 CUS 0824449 208
EMT (62X46)R YE CUS 0830254 290 JBC 2,5/8 3240166 517 MICROFOX-SP 1212488 374 PATG 0/10 1013795 224
EMT (EX15)R 0830671 265 MICROFOX-SP-1 1212487 374 PATG 0/12 0827076 224

EMT (EX15)R CUS 0830395 265 PATG 0/15 1013740 224

ES-SSMK-GB 60X18 5032468 300 PATG 0/18 0820507 224
ES-SSMK-GB 96X30 5032455 300 PATG 0/23 0828046 224
ESL (25X6) 0801849 214 K N PATG 1/10 1013805 224

ESL (60X15) 0801851 215 KDT-ST 3 3063921 540 NLS-CU 3/10 SN 1000MM 0402174 508 PATG 1/12 0827077 224
ESL 24X 4 0808231 217 KDT-ST 4 3063934 540 NLS-CU 6/ 6 SN 1000MM 0402161 508 PATG 1/15 1013025 224
ESL 26X 6 0808105 109 KDT-ST 5 3063947 540 NS 15 AL PERF 2000MM 1401763 487 PATG 1/18 0820510 224
ESL 29X 8 0808257 215 KDT-ST 6 3063950 540 NS 15 PERF 2000MM 1401682 487 PATG 1/23 1013847 224

ESL 40X17 0808095 215 KDT-ST 7 3063963 540 NS 15 PERF/... 1208102 487 PATG 1/30 0822440 224
ESL 40X17 CUS 0824403 501 KDT-ST 8 3063976 540 NS 15 UNPERF 2000MM 1401695 486 PATG 2/10 1013818 224
ESL 44X 7 0808244 501 KDT-ST 9 3063989 540 NS 15 UNPERF/... 1208089 486 PATG 2/12 0827078 224
ESL 44X 7 CUS 0824404 501 KDT-ST 10 3063992 540 NS 15 UNPERF/SO/... 1208092 486 PATG 2/15 1013038 224

KDT-ST 11 3064001 540 NS 15 WH PERF 2000MM 1204096 487 PATG 2/18 0820523 224
KDT-ST 12 3062016 540 NS 30/15 PERF.2000MM 3240262 547 PATG 2/23 1013850 224
KDT-ST 13 3062029 540 NS 32 PERF 2000MM 1201002 496 PATG 2/30 0822453 224
G KDT-ST 14 3062032 540 NS 32 UNPERF 2000MM 1201015 496 PATG 3/10 1013821 224

GBS 3,5-25X12 0830292 109 KDT-ST 15 3062045 540 NS 35/ 7,5 AL UNPERF 2000MM 0801704 490 PATG 3/12 0827079 224
GBS 3,5-25X3,5 0830290 109 KDT-ST 16 3062058 540 NS 35/ 7,5 CAP 1206560 503 PATG 3/15 1013041 224
GBS 5-25X12 0810588 109 KDT-ST 17 3062061 540 NS 35/ 7,5 CU UNPERF 2000MM 0801762 489 PATG 3/18 0820536 224
GBS 5-25X5 0829126 109 KDT-ST 2 1410220 540 NS 35/ 7,5 PERF 755MM 1207640 491 PATG 3/23 1013863 224

GBS-ZB/26X6 0809298 109 KEL-EMV 16-4 3063507 540 NS 35/ 7,5 PERF 1155MM 1207666 491 PATG 3/30 0822466 224
GKM 1 GY 1750498 218 KEL-EMV 24-5 3063510 540 NS 35/ 7,5 PERF 2000MM 0801733 491 PATG 4/12 0827080 224
GKM 2 GY 1750485 219 KEL-EMV-F 3063523 540 NS 35/ 7,5 PERF/... 1208131 491 PATG 4/15 1013054 224
GLM 4 1201769 496 KLM 1004306 500 NS 35/ 7,5 UNPERF 2000MM 0801681 488 PATG 4/18 0820549 224

GLM 5 1201772 496 KLM 1 1004319 500 NS 35/ 7,5 UNPERF/... 1208115 488 PATG 4/23 0808011 224
GLM 6 1201785 496 KLM 2 0807575 500 NS 35/ 7,5 UNPERF/SO/... 1208128 488 PATG 4/30 0822479 224
GPE 13X 9 WH 0806932 294 KLM 3 0811969 500 NS 35/ 7,5 V2A UNPERF 2000MM 0801377 490 PATG 5/15 1013067 224
GPE 13X 9 WH CUS 0824414 294 KLM 3-L 0814788 500 NS 35/ 7,5 WH UNPERF 2000MM 1204122 489 PATG 5/18 0828059 224

GPE 17,5X12 WH 0806916 294 KLM-A 1004348 501 NS 35/ 7,5 ZN PERF 2000MM 1206421 491 PATG 5/23 0808024 224
GPE 17,5X12 WH CUS 0824415 294 KME 0807083 217 NS 35/ 7,5 ZN UNPERF 2000MM 1206434 489 PATG 5/30 0822482 224
GPE 20X 7 WH 0806990 294 KMK 1005208 216 NS 35/15 AL UNPERF 2000MM 1201756 496 PATG 6/15 1013070 224
GPE 20X 7 WH CUS 0824416 294 KMK 1 0830745 214 NS 35/15 AL UNPERF/... 1210213 496 PATG 6/18 0828062 224

PHOENIX CONTACT 603

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Index
Alphabetical

Type Order No. Page Type Order No. Page Type Order No. Page Type Order No. Page

PATG 6/23 0808037 224 PML-M112 (D50) 1014170 341 PML-T110 (52X560)R CUS 1014268 347 PMM (EX40)R CUS 1014327 357
PATG 7/15 1013083 224 PML-M113 (D100) 1014174 341 PML-W100 (100X100)R 0830431 321 PMM (EX40)R SR 1014313 356
PATG 7/23 0808040 224 PML-M113 (D200) 1014175 341 PML-W100 (100X100)R CUS 0830495 321 PMM (EX40)R SR CUS 1014328 357
PATG 8/15 1013096 224 PML-M113 (D50) 1014173 341 PML-W100 (25X25)R 0830429 321 PMM (EX40)R YE 1014314 356

PATG 8/23 0808053 224 PML-P100 (D100)R 1014226 327 PML-W100 (25X25)R CUS 0830493 321 PMM (EX40)R YE CUS 1014329 357
PATG 9/15 1013106 224 PML-P100 (D100)R CUS 1014228 327 PML-W100 (50X50)R 0830430 321 PMM (EX50)R 1014315 356
PATO 1/10 1013876 225 PML-P100 (D50)R 1014225 327 PML-W100 (50X50)R CUS 0830494 321 PMM (EX50)R CUS 1014330 357
PATO 1/12 0827081 225 PML-P100 (D50)R CUS 1014227 327 PML-W101 (100X100) 0830435 322 PMM (EX50)R SR 1014316 356

PATO 1/15 1013119 225 PML-P101 (D100) 1014185 328 PML-W101 (200X200) 0830436 322 PMM (EX50)R SR CUS 1014331 357
PATO 1/18 0823740 225 PML-P101 (D200) 1014186 328 PML-W101 (25X25) 0830433 322 PMM (EX50)R YE 1014317 356
PATO 1/23 1013892 225 PML-P101 (D50) 1014184 328 PML-W101 (50X50) 0830434 322 PMM (EX50)R YE CUS 1014332 357
PATO 1/30 0822495 225 PML-P102 (D100) 1014188 329 PML-W200 (100X100)R 0830453 321 PPS BASIC I/M 1207585 372

PATO 2/10 1013889 225 PML-P102 (D200) 1014189 329 PML-W200 (100X100)R CUS 0830498 321 PPS CD BLADE 1207572 371
PATO 2/12 0827082 225 PML-P102 (D50) 1014187 329 PML-W200 (25X25)R 0830451 321 PPS CD M 1207569 371
PATO 2/15 1013122 225 PML-P103 (D100) 1014191 329 PML-W200 (25X25)R CUS 0830496 321 PPS CD M COHO 1208995 371
PATO 2/18 0823753 225 PML-P103 (D200) 1014192 329 PML-W200 (50X50)R 0830452 321 PPS CLASSIC I/M 1206256 373

PATO 2/23 1013902 225 PML-P103 (D50) 1014190 329 PML-W200 (50X50)R CUS 0830497 321 PPS CLASSIC M 1206243 373
PATO 2/30 0822505 225 PML-P104 (D100) 1014194 329 PML-W201 (100X100) 0830456 323 PPS HYDRAULIC CYL 1208924 373
PATO 3/15 1013135 225 PML-P104 (D200) 1014195 329 PML-W201 (200X200) 0830457 323 PPS STANDARD I/M 1206230 373
PATO 4/15 1013148 225 PML-P104 (D50) 1014193 329 PML-W201 (25X25) 0830454 323 PPS STANDARD M 1206175 373

PKT 9X20 0803977 225 PML-P105 (D100) 1014197 330 PML-W201 (50X50) 0830455 323 PPS TABLE 1206285 371
PML-GHS100 (13X13)R 1014289 349 PML-P105 (D200) 1014198 330 PML-W202 (100X100) 0830439 323 PPS-ST (3,5X12)L 1203563 373
PML-GHS100 (25X25)R 1014290 349 PML-P105 (D50) 1014196 330 PML-W202 (200X200) 0830440 323 PPS-ST (3,5X12)Q 1203550 373
PML-GHS101 (13X13) 1014269 350 PML-P106 (D100) 1014200 330 PML-W202 (25X25) 0830437 323 PPS-ST (3,8) 1204892 373

PML-GHS101 (25X25) 1014270 350 PML-P106 (D200) 1014201 330 PML-W202 (50X50) 0830438 323 PPS-ST (4,3) 1202616 373
PML-GHS102 (13X13) 1014271 351 PML-P106 (D50) 1014199 330 PML-W203 (100X100) 0830443 323 PPS-ST (4,5X12)L 1203534 373
PML-GHS102 (25X25) 1014272 351 PML-P107 (D100) 1014203 331 PML-W203 (200X200) 0830444 323 PPS-ST (4,5X12)Q 1203547 373
PML-GHS103 (13X13) 1014273 351 PML-P107 (D200) 1014204 331 PML-W203 (25X25) 0830441 323 PPS-ST (5,3) 1202629 373

PML-GHS103 (25X25) 1014274 351 PML-P107 (D50) 1014202 331 PML-W203 (50X50) 0830442 323 PPS-ST (5,5X12)L 1202603 373
PML-GHS104 (13X13) 1014275 351 PML-P108 (D100) 1014206 331 PML-W204 (100X100) 0830446 323 PPS-ST (5,5X12)Q 1203411 373
PML-GHS104 (25X25) 1014276 351 PML-P108 (D200) 1014207 331 PML-W204 (200X200) 0830447 323 PPS-ST (6,4) 1202632 373
PML-GHS105 (13X13) 1014277 352 PML-P108 (D50) 1014205 331 PML-W204 (50X50) 0830445 323 PPS-ST (6,5X15)L 1202593 373

PML-GHS105 (25X25) 1014278 352 PML-P109 (D100) 1014209 331 PML-W205 (100X100) 0830449 323 PPS-ST (6,5X15)Q 1203408 373
PML-GHS106 (13X13) 1014279 352 PML-P109 (D200) 1014210 331 PML-W205 (200X200) 0830450 323 PPS-ST (7,0) 1204889 373
PML-GHS106 (25X25) 1014280 352 PML-P109 (D50) 1014208 331 PML-W205 (50X50) 0830448 323 PPS-ST (8,4) 1202726 373
PML-GHS107 (13X13) 1014281 353 PML-P110 (D100) 1014212 332 PML-W300 (105X52)R 0830460 321 PROFIPOL 1209101 434

PML-GHS107 (25X25) 1014282 353 PML-P110 (D200) 1014213 332 PML-W300 (105X52)R CUS 0830501 321 PT/FS 2,8 1406700 462
PML-GHS108 (13X13) 1014283 353 PML-P110 (D50) 1014211 332 PML-W300 (52X26)R 0830458 321 PT/FS 4,8 1670497 462
PML-GHS108 (25X25) 1014284 353 PML-P111 (D100) 1014215 333 PML-W300 (52X26)R CUS 0830499 321 PT/FS 6,3 0604707 462
PML-GHS109 (13X13) 1014285 353 PML-P111 (D200) 1014216 333 PML-W300 (74X37)R 0830459 321

PML-GHS109 (25X25) 1014286 353 PML-P111 (D50) 1014214 333 PML-W300 (74X37)R CUS 0830500 321
PML-M100 (D100)R 1014181 335 PML-T101 (26X280)R 1014229 342 PML-W301 (105X52) 0830463 324
PML-M100 (D100)R CUS 1014183 335 PML-T101 (26X280)R CUS 1014249 342 PML-W301 (200X100) 0830464 324
PML-M100 (D50)R 1014180 335 PML-T101 (52X560)R 1014230 342 PML-W301 (52X26) 0830461 324 R
PML-M100 (D50)R CUS 1014182 335 PML-T101 (52X560)R CUS 1014250 342 PML-W301 (74X37) 0830462 324 RVT-AL/ST 2,4L/8 3240548 370
PML-M101 (D100) 1014138 336 PML-T102 (26X280)R 1014231 343 PML-W302 (105X52) 0830467 325 RVT-AL/ST 3,2/10 3240511 370
PML-M101 (D200) 1014139 336 PML-T102 (26X280)R CUS 1014251 343 PML-W302 (200X100) 0830468 325 RVT-AL/ST 3,2/12 3240512 370
PML-M101 (D50) 1014137 336 PML-T102 (52X560)R 1014232 343 PML-W302 (52X26) 0830465 325 RVT-AL/ST 3,2/6 3240509 370

PML-M102 (D100) 1014141 337 PML-T102 (52X560)R CUS 1014252 343 PML-W302 (74X37) 0830466 325 RVT-AL/ST 3,2/8 3240510 370
PML-M102 (D200) 1014142 337 PML-T103 (26X280)R 1014233 343 PML-W303 (105X52) 0830471 325 RVT-AL/ST 3/10 3240506 370
PML-M102 (D50) 1014140 337 PML-T103 (26X280)R CUS 1014253 343 PML-W303 (200X100) 0830472 325 RVT-AL/ST 3/12 3240507 370
PML-M103 (D100) 1014144 337 PML-T103 (52X560)R 1014234 343 PML-W303 (52X26) 0830469 325 RVT-AL/ST 3/6 3240504 370

PML-M103 (D200) 1014145 337 PML-T103 (52X560)R CUS 1014254 343 PML-W303 (74X37) 0830470 325 RVT-AL/ST 3/8 3240505 370
PML-M103 (D50) 1014143 337 PML-T104 (26X280)R 1014235 343 PML-W304 (105X52) 0830475 325 RVT-AL/ST 4,8/10 3240520 370
PML-M104 (D100) 1014147 337 PML-T104 (26X280)R CUS 1014255 343 PML-W304 (200X100) 0830476 325 RVT-AL/ST 4,8/12 3240521 370
PML-M104 (D200) 1014148 337 PML-T104 (52X560)R 1014236 343 PML-W304 (52X26) 0830473 325 RVT-AL/ST 4,8/14 3240553 370

PML-M104 (D50) 1014146 337 PML-T104 (52X560)R CUS 1014256 343 PML-W304 (74X37) 0830474 325 RVT-AL/ST 4,8/16 3240522 370
PML-M105 (D100) 1014150 338 PML-T105 (26X280)R 1014237 344 PML-W305 (105X52) 0830479 325 RVT-AL/ST 4,8/6 3240518 370
PML-M105 (D200) 1014151 338 PML-T105 (26X280)R CUS 1014257 344 PML-W305 (200X100) 0830480 325 RVT-AL/ST 4,8/8 3240519 370
PML-M105 (D50) 1014149 338 PML-T105 (52X560)R 1014238 344 PML-W305 (52X26) 0830477 325 RVT-AL/ST 4/10 3240515 370

PML-M106 (D100) 1014153 338 PML-T105 (52X560)R CUS 1014258 344 PML-W305 (74X37) 0830478 325 RVT-AL/ST 4/12 3240516 370
PML-M106 (D200) 1014154 338 PML-T106 (26X280)R 1014239 345 PMM (EX20)R 1014303 356 RVT-AL/ST 4/14 3240517 370
PML-M106 (D50) 1014152 338 PML-T106 (26X280)R CUS 1014259 345 PMM (EX20)R CUS 1014318 357 RVT-AL/ST 4/6 3240513 370
PML-M107 (D100) 1014156 339 PML-T106 (52X560)R 1014240 345 PMM (EX20)R SR 1014304 356 RVT-AL/ST 4/8 3240514 370

PML-M107 (D200) 1014157 339 PML-T106 (52X560)R CUS 1014260 345 PMM (EX20)R SR CUS 1014319 357 RVT-PA 4 3240498 543
PML-M107 (D50) 1014155 339 PML-T107 (26X280)R 1014241 345 PMM (EX20)R YE 1014305 356 RVT-PA 6 3240499 543
PML-M108 (D100) 1014159 339 PML-T107 (26X280)R CUS 1014261 345 PMM (EX20)R YE CUS 1014320 357
PML-M108 (D200) 1014160 339 PML-T107 (52X560)R 1014242 345 PMM (EX25)R 1014306 356

PML-M108 (D50) 1014158 339 PML-T107 (52X560)R CUS 1014262 345 PMM (EX25)R CUS 1014321 357
PML-M109 (D100) 1014162 339 PML-T108 (26X280)R 1014243 345 PMM (EX25)R SR 1014307 356
PML-M109 (D200) 1014163 339 PML-T108 (26X280)R CUS 1014263 345 PMM (EX25)R SR CUS 1014322 357
PML-M109 (D50) 1014161 339 PML-T108 (52X560)R 1014244 345 PMM (EX25)R YE 1014308 356 S
PML-M110 (D100) 1014165 340 PML-T108 (52X560)R CUS 1014264 345 PMM (EX25)R YE CUS 1014323 357 SAC BIT HOOD-W 24 1212486 432
PML-M110 (D200) 1014166 340 PML-T109 (26X280)R 1014245 346 PMM (EX30)R 1014309 356 SAC BIT M12-D15 1208432 432
PML-M110 (D50) 1014164 340 PML-T109 (26X280)R CUS 1014265 346 PMM (EX30)R CUS 1014324 357 SAC BIT M12-W14 1212513 432
PML-M111 (D100) 1014168 340 PML-T109 (52X560)R 1014246 346 PMM (EX30)R SR 1014310 356 SAC BIT M8-D10 1208461 432

PML-M111 (D200) 1014169 340 PML-T109 (52X560)R CUS 1014266 346 PMM (EX30)R SR CUS 1014325 357 SAC BIT MIN-D25 1212512 432
PML-M111 (D50) 1014167 340 PML-T110 (26X280)R 1014247 347 PMM (EX30)R YE 1014311 356 SAC BIT QUICKON-W13 1212033 432
PML-M112 (D100) 1014171 341 PML-T110 (26X280)R CUS 1014267 347 PMM (EX30)R YE CUS 1014326 357 SACC BIT M12-D20 1208445 432
PML-M112 (D200) 1014172 341 PML-T110 (52X560)R 1014248 347 PMM (EX40)R 1014312 356 SACC BIT M8-D12 1208474 432

604 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Index
Alphabetical

Type Order No. Page Type Order No. Page Type Order No. Page Type Order No. Page

SD-D/SC 2963310 518 SF-LHEX SET 1212544 431 SK 2,8 REEL P5,08 WH CUS 0825123 101 THERMOMARK CARD 5146464 35
SD-D/SC/GY 2963815 518 SF-M BH 1212070 535 SK 20 3025189 522 THERMOMARK CARD PLUS 5146481 34
SD-D/SC/LA 2964898 518 SF-M SET 1212543 443 SK 20-D 3026887 522 THERMOMARK CARD SET 5147200 41
SD-D/SC/LA/GY 2963491 518 SF-PH 0-60 1212558 423 SK 28 3026997 522 THERMOMARK CARD SET DE CH 5147220 41

SD-D/SC/LA/YE 2963404 518 SF-PH 1-80 1212559 423 SK 28-D 3027006 522 THERMOMARK CARD SET DK DK 5147213 41
SD-D/SC/YE 2963459 518 SF-PH 1-80 S-VDE 1212693 419 SK 3,8 REEL P5 WH CUS 0825124 102 THERMOMARK CARD SET EN 5147201 41
SD-D/SP 2963323 518 SF-PH 2-100 1212560 423 SK 3,8 REEL P5,08 WH CUS 0825125 102 THERMOMARK CARD SET EN BE 5147214 41
SD-D/SP/GY 2963501 518 SF-PH 2-100 S-VDE 1212694 419 SK 3,8 REEL P6,2 WH CUS 0825126 103 THERMOMARK CARD SET ES ES 5147218 41

SD-D/SP/LA 2963307 518 SF-PH 3-150 1212561 423 SK 3,8 REEL P7,5 WH CUS 0825127 103 THERMOMARK CARD SET FR FR 0801591 41
SD-D/SP/LA/GY 2963488 518 SF-PHSL 1-80 S-VDE 1212697 419 SK 3,8 REEL P7,62 WH CUS 0825128 103 THERMOMARK CARD SET HU HU 5147221 41
SD-D/SP/LA/YE 2963475 518 SF-PHSL 1-80 VDE 1212283 423 SK 35 3026463 522 THERMOMARK CARD SET IT IT 5147217 41
SD-D/SP/YE 2963462 518 SF-PHSL 2-100 S-VDE 1212698 419 SK 35-D 3026890 522 THERMOMARK CARD SET PL US 5147215 41

SD-F/SC 2963352 519 SF-PHSL 2-100 VDE 1212288 423 SK 5,0 REEL P7,5 WH CUS 0825131 104 THERMOMARK CARD SET PT PT 5147219 41
SD-F/SC/GY 2963828 519 SF-PZ 0-60 1212562 423 SK 5,0 REEL P7,62 WH CUS 0825132 104 THERMOMARK CARD SET RU RU 5147211 41
SD-F/SC/LA 2963336 519 SF-PZ 1-80 1212563 423 SK U SR:UNGESTANZT 0800145 292 THERMOMARK CARD SET SE SE 5147212 41
SD-F/SC/LA/GY 2963844 519 SF-PZ 1-80 S-VDE 1212695 419 SK U WH:UNGESTANZT 0800129 292 THERMOMARK CARD-UCT-MAG1 5146480 36

SD-F/SC/LA/YE 2963909 519 SF-PZ 2-100 1212564 423 SK U YE:UNGESTANZT 0800132 292 THERMOMARK CARD-UCT-MAG10 0801737 36
SD-F/SP/LA 2963349 519 SF-PZ 2-100 S-VDE 1212696 419 SK U/2,8 WH:UNBEDRUCKT 0803883 100 THERMOMARK CARD-UCT-MAG11 0801738 36
SD-F/SP/LA/GY 2963857 519 SF-PZ 3-150 1212565 423 SK U/3,8 WH:UNBEDRUCKT 0803906 102 THERMOMARK CARD-UCT-MAG12 0830399 36
SD-US/SC/LA/GY 2963860 519 SF-PZSL 1-80 S-VDE 1212699 419 SK U/5,0 WH:UNBEDRUCKT 0803922 104 THERMOMARK CARD-UCT-MAG13 0830400 36

SD-WMTB (100X10) 0826543 221 SF-PZSL 1-80 VDE 1212556 423 SKS 14 3240211 523 THERMOMARK CARD-UCT-MAG14 0830401 36
SD-WMTB (111X10) VA 0826608 222 SF-PZSL 2-100 S-VDE 1212700 419 SKS 14-D 3240214 523 THERMOMARK CARD-UCT-MAG15 0830402 36
SD-WMTB (30X10) VA 0826569 222 SF-PZSL 2-100 VDE 1212557 423 SKS 14-NS35 3240217 523 THERMOMARK CARD-UCT-MAG16 0830403 36
SD-WMTB (47X10) VA 0826572 222 SF-SL 0,4X2,0-60 1212546 417 SKS 14-SNS35 3062799 523 THERMOMARK CARD-UCT-MAG17 0830404 36

SD-WMTB (70X10) 0826530 221 SF-SL 0,4X2,5-75 1212547 417 SKS 20 3240212 523 THERMOMARK CARD-UCT-MAG18 0830405 36
SD-WMTB (70X10) VA 0826585 222 SF-SL 0,5X3,0-80 1212548 417 SKS 20-D 3240215 523 THERMOMARK CARD-UCT-MAG2 5146563 36
SD-WMTB (92X10) VA 0826598 222 SF-SL 0,6X3,5-100 1212549 417 SKS 20-NS35 3240218 523 THERMOMARK CARD-UCT-MAG20 0830751 36
SD-WMTBS (CH) VA 0826640 222 SF-SL 0,6X3,5-100 S-VDE 1212587 418 SKS 20-SNS35 3062809 523 THERMOMARK CARD-UCT-MAG22 0830771 36

SD-WMTBS (CH) YE 0826611 221 SF-SL 0,6X3,5-200 1212550 417 SKS 8 3240210 523 THERMOMARK CARD-UCT-MAG23 0830808 36
SD-WMTBS (NEUTRAL) CC 0826637 221 SF-SL 0,8X4,0-100 1212551 417 SKS 8-D 3240213 523 THERMOMARK CARD-UCT-MAG24 0830809 36
SD-WMTBS (NEUTRAL) VA 0826666 222 SF-SL 0,8X4,0-100 S-VDE 1212588 418 SKS 8-NS35 3240216 523 THERMOMARK CARD-UCT-MAG3 5146613 36
SD-WMTBS (NU) CC 0826527 221 SF-SL 1,0X5,5-125 S-VDE 1212589 418 SKS 8-SNS35 3062786 523 THERMOMARK CARD-UCT-MAG4 5146614 36

SD-WMTBS (NU) VA 0826556 222 SF-SL 1,0X5,5-150 1212552 417 SS-ZB WH 5031171 218 THERMOMARK CARD-UCT-MAG5 5146615 36
SD-WMTBS (S) YE 0826514 221 SF-SL 1,2X6,5-150 1212553 417 SS-ZB WH CUS 0824470 518 THERMOMARK CARD-UCT-MAG6 5146616 36
SD-WMTBS (SY) VA 0826653 222 SF-SL/PH SET 1212541 442 SS-ZB YE 5031650 218 THERMOMARK CARD-UCT-MAG7 0801734 36
SD-WMTBS (SY) YE 0826624 221 SF-SL/PH SET VDE 1212539 442 SSMK 60X18 5032439 300 THERMOMARK CARD-UCT-MAG8 0801735 36

SF-ASD 21 1212532 425 SF-SL/PH/PZ-SL SET S-VDE 1212701 419 SSMK 96X30 5032442 300 THERMOMARK CARD-UCT-MAG9 0801736 36
SF-ASD 21 SET 230V 1212530 425 SF-SL/PZ SET 1212542 442 ST-BW 1207608 421 THERMOMARK CARD-US-MAG1 5146451 37
SF-ASD 21/ACCU 1,5 AH 1212533 425 SF-SL/PZ SET VDE 1212540 442 STP 3,5-2 0830131 110 THERMOMARK ROLL 5146477 38
SF-ASD 21/CHARGER 230V 1212535 425 SF-SLIC 1,2X7,0-125 1212554 417 STP 3,5-3 0830132 110 THERMOMARK ROLL SET 5147300 41

SF-BIT SET 1212545 443 SF-SLIC 1,6X10-175 1212555 417 STP 4-2 0810575 110 THERMOMARK ROLL SET DE CH 5147230 41
SF-BIT-HEX 2,5-50 1212646 429 SF-THEX 10-200 1212644 431 STP 4-2-ZB 3038613 110 THERMOMARK ROLL SET DK DK 5147224 41
SF-BIT-HEX 2-50 1212645 429 SF-THEX 2,5-100 1212638 431 STP 5-2 0800967 110 THERMOMARK ROLL SET EN 5147301 41
SF-BIT-HEX 3-50 1212647 429 SF-THEX 2-100 1212637 431 STP 5-2-ZB 3037643 110 THERMOMARK ROLL SET EN BE 5147225 41

SF-BIT-HEX 4-50 1212648 429 SF-THEX 3-100 1212639 431 STP 5-2/S 0800970 110 THERMOMARK ROLL SET ES ES 5147228 41
SF-BIT-HEX 5-50 1212649 429 SF-THEX 4-150 1212640 431 STP 5-3 0810562 110 THERMOMARK ROLL SET FR FR 0801592 41
SF-BIT-HEX 6-50 1212650 429 SF-THEX 5-150 1212641 431 SZF 0-0,4X2,5 1204504 420 THERMOMARK ROLL SET HU HU 5147231 41
SF-BIT-HEX 8-50 1212651 429 SF-THEX 6-200 1212642 431 SZF 1-0,6X3,5 1204517 420 THERMOMARK ROLL SET IT IT 5147227 41

SF-BIT-PH 1-50 1212579 427 SF-THEX 8-200 1212643 431 SZF 2-0,8X4,0 1204520 420 THERMOMARK ROLL SET PL US 5147226 41
SF-BIT-PH 1-70 1212582 427 SF-TX SET VDE 1212537 442 SZF 3-1,0X5,5 1206612 420 THERMOMARK ROLL SET PT PT 5147229 41
SF-BIT-PH 2-50 1212580 427 SF-TXH SET 1212538 442 SZG 0,6X3,5 VDE 1205121 423 THERMOMARK ROLL SET RU RU 5147222 41
SF-BIT-PH 2-70 1212583 427 SF-UBH 1212590 426 SZG 0,9X6,5 VDE 1205134 423 THERMOMARK ROLL SET SE SE 5147223 41

SF-BIT-PH 3-50 1212581 427 SF-VT VDE 1212598 434 SZK PH0 VDE 1205147 422 THERMOMARK ROLL X1 5146723 39
SF-BIT-PH 3-70 1212584 427 SHN 13 1209923 430 SZK PH1 VDE 1205150 422 THERMOMARK ROLL X1 -DISPENSER1014401 39
SF-BIT-PHSL 1-70 1212479 427 SHN 5.5 1209855 430 SZK PH2 VDE 1205163 422 THERMOMARK ROLL X1 CUTTER 5146765 39
SF-BIT-PHSL 2-70 1212601 427 SHN 8 1209868 430 SZK PH3 VDE 1212536 422 THERMOMARK ROLL X1 CUTTER/P5146766 39

SF-BIT-PZ 1-50 1212591 427 SK 2,54/2,8:FORTL.ZAHLEN 0804853 100 SZK PZ0 VDE 1206447 422 THERMOMARK ROLL X1-CASE 5146724 39
SF-BIT-PZ 1-70 1212594 427 SK 2,8 WH:REEL 0805205 100 SZK PZ1 VDE 1206450 422 THERMOMARK ROLL-CUTTER 5146422 38
SF-BIT-PZ 2-50 1212592 427 SK 3,5/2,8:FORTL.ZAHLEN 0804073 101 SZK PZ2 VDE 1206463 422 THERMOMARK ROLL-CUTTER/P 5146435 38
SF-BIT-PZ 2-70 1212595 427 SK 3,8 WH:REEL 0805218 102 SZK PZ3 VDE 1212599 422 THERMOMARK ROLL-ERH 5146448 38

SF-BIT-PZ 3-50 1212593 427 SK 3,81/2,8:FORTL.ZAHLEN 0804109 101 SZS 0,4X2,5 VDE 1205037 416 THERMOMARK W2 5146147 43
SF-BIT-PZ 3-70 1212596 427 SK 5 3025338 522 SZS 0,5X3,0 VDE 1207404 416 THERMOMARK X1-CASE 5145300 42
SF-BIT-PZSL 1-70 1212603 427 SK 5,0 WH:REEL 0805221 104 SZS 0,6X2,5 VDE 1205040 416 THERMOMARK X1-CUTTER 5145290 42
SF-BIT-PZSL 2-70 1212604 427 SK 5,08/2,8:FORTL.ZAHLEN 0804280 101 SZS 0,6X3,5 1205053 420 THERMOMARK X1-CUTTER/P 5146244 42

SF-BIT-SL 0,5X3,0-50 1212566 427 SK 5,08/3,8:FORTL.ZAHLEN 0804293 102 SZS 0,6X3,5 VDE 1212602 416 THERMOMARK X1.2 5146231 42
SF-BIT-SL 0,5X3,0-70 1212567 427 SK 5-D 3025406 522 SZS 0,8X4,0 VDE 1212508 416 THERMOMARK X1.2-KIT 5146341 42
SF-BIT-SL 0,6X3,5-50 1212568 427 SK 5/3,8:FORTL.ZAHLEN 0804183 102 SZS 1,0X4,0 VDE 1205066 416 THERMOMARK-ERH 500 5146309 38
SF-BIT-SL 0,6X3,5-70 1212569 427 SK 6,2/3,8:FORTL.ZAHLEN 0804374 103 SZS 1,0X5,5 VDE 1209114 416 THERMOMARK-RIBBON 110 5145384 38

SF-BIT-SL 0,8X4,0-50 1212571 427 SK 7,5/3,8:FORTL.ZAHLEN 0804455 103 SZS 1,0X6,5 VDE 1205079 416 THERMOMARK-RIBBON 110 BU 0829544 38
SF-BIT-SL 0,8X4,0-70 1212572 427 SK 7,5/5:FORTL.ZAHLEN 0804468 104 SZS 1,2X8,0 VDE 1205082 416 THERMOMARK-RIBBON 110 GN 0829542 38
SF-BIT-SL 1,0X5,5-50 1212574 427 SK 7,62/3,8:FORTL.ZAHLEN 0804549 103 THERMOMARK-RIBBON 110 RD 0829543 38
SF-BIT-SL 1,0X5,5-70 1212575 427 SK 7,62/5:FORTL.ZAHLEN 0804552 104 THERMOMARK-RIBBON 110-EML-HT0800342 38

SF-BIT-SL 1,2X6,5-70 1212577 427 SK 8 3025163 522 THERMOMARK-RIBBON 110-TC 0801371 34

SF-BIT-SLS 0,6X3,5-50 1212605 427 SK 8-D 3026861 522 THERMOMARK-RIBBON 110-WMSU0801358 38
SF-BIT-SLS 0,9X6,5-50 1212606 427 SK 10,0 WH:REEL 0812188 105 THERMOMARK-RIBBON 110-WMSU WH0801359 38
SF-BIT-TX 10-50 1212573 428 SK 14 3025176 522 T THERMOMARK-RIBBON 110-WMTB HF5148007 39

SF-BIT-TX 15-50 1212576 428 SK 14-D 3026874 522 TESTFOX CC 1212210 435 THERMOMARK-RIBBON 64-WMSU 0801360 38
SF-BIT-TX 20-50 1212578 428 SK 2,8 REEL P2,54 WH CUS 0825120 100 TESTFOX CC-1 1212211 435 THERMOMARK-RIBBON 64-WMSU WH0801361 38
SF-BIT-TX 8-50 1212570 428 SK 2,8 REEL P3,5 WH CUS 0825121 101 TESTFOX M 1212208 436 TL CASE 0800613 34
SF-CCK 9 1212525 433 SK 2,8 REEL P3,81 WH CUS 0825122 101 TESTFOX M-1 1212209 437 TM-RIBBON 110-TC BK/RD 1014403 34

PHOENIX CONTACT 605

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Index
Alphabetical

Type Order No. Page Type Order No. Page Type Order No. Page Type Order No. Page

TM-RIBBON 110-TC BK/RD/BU/YE 1014405 34 TMT 100 R YE 0816618 97 UC-EMLP (17X15) 0827885 234 UC-EMP (27X18) SR 0825447 238
TM-RIBBON 110-TC BK/RD/YE 1014404 34 TMT 100 R YE CUS 0824506 97 UC-EMLP (17X15) CUS 0827941 235 UC-EMP (27X18) SR CUS 0827654 239
TM-RIBBON 110-TC/TR WH 1014402 34 TMT TOOL 0816650 94 UC-EMLP (17X15) SR 0827887 234 UC-EMP (27X18) YE 0825446 238
TML (101X4,2)R TR 0816621 98 TMT2 (EX11)R 0802683 139 UC-EMLP (17X15) SR CUS 0827942 235 UC-EMP (27X18) YE CUS 0827643 239

TML (101X4,2)R TR CUS 0824472 98 TMT2 (EX11)R CUS 0830811 139 UC-EMLP (17X15) YE 0827886 234 UC-EMP (27X27) 0825451 238
TML (101X9,5)R TR 0816647 98 TOOL DATA SET 1208856 440 UC-EMLP (17X15) YE CUS 0827943 235 UC-EMP (27X27) CUS 0827635 239
TML (101X9,5)R TR CUS 0824473 98 TOOL SET ALLROUND 2 1208843 441 UC-EMLP (17X9) 0819314 234 UC-EMP (27X27) SR 0825453 238
TML (104X10)R 0801835 106 TOOL-BAG 1212504 439 UC-EMLP (17X9) CUS 0824553 235 UC-EMP (27X27) SR CUS 0827655 239

TML (104X2,8)R 0801832 106 TOOL-BAG EMPTY 1212500 439 UC-EMLP (17X9) SR 0828096 234 UC-EMP (27X27) YE 0825452 238
TML (104X3,8)R 0801833 106 TOOL-BELTPOUCH 1212506 439 UC-EMLP (17X9) SR CUS 0828100 235 UC-EMP (27X27) YE CUS 0827644 239
TML (104X5)R 0801834 106 TOOL-BELTPOUCH EMPTY 1212502 439 UC-EMLP (17X9) YE 0822628 234 UC-EMP (27X8) 0825427 238
TML (EX10)R 0801839 107 TOOL-CARRIER 1212503 439 UC-EMLP (17X9) YE CUS 0824554 235 UC-EMP (27X8) CUS 0827631 239

TML (EX2,8)R 0801836 107 TOOL-CARRIER EMPTY 1212499 439 UC-EMLP (20X8) 0819327 234 UC-EMP (27X8) SR 0825429 238
TML (EX3,8)R 0801837 107 TOOL-KIT STANDARD 1212422 438 UC-EMLP (20X8) CUS 0824556 235 UC-EMP (27X8) SR CUS 0827651 239
TML (EX4,2)R TR 0816715 99 TOOL-KIT STANDARD EMPTY 1212423 438 UC-EMLP (20X8) SR 0828097 234 UC-EMP (27X8) YE 0825428 238
TML (EX4,2)R TR CUS 0824474 99 TOOL-SET ALLROUND 3 1208953 441 UC-EMLP (20X8) SR CUS 0828101 235 UC-EMP (27X8) YE CUS 0827640 239

TML (EX5)R 0801838 107 TOOL-WRAP 1212505 438 UC-EMLP (20X8) YE 0822631 234 UC-EMP (49X15) 0825457 237
TML (EX7)R 0830837 107 TOOL-WRAP EMPTY 1212501 438 UC-EMLP (20X8) YE CUS 0824557 235 UC-EMP (49X15) CUS 0827636 237
TML (EX9,5)R TR 0816634 99 TSD 02 SAC 1208487 432 UC-EMLP (22X22) 0825463 234 UC-EMP (49X15) SR 0825459 237
TML (EX9,5)R TR CUS 0824475 99 TSD 04 SAC 1208429 432 UC-EMLP (22X22) CUS 0826985 235 UC-EMP (49X15) SR CUS 0827656 237

TMT 4R 0816375 94 TSD 08 SAC 1212597 432 UC-EMLP (22X22) SR 0825465 234 UC-EMP (49X15) YE 0825458 237
TMT 4 R BU 0816333 94 TSD 20 SAC 1212020 432 UC-EMLP (22X22) SR CUS 0826987 235 UC-EMP (49X15) YE CUS 0827645 237
TMT 4 R BU CUS 0824477 94 TSD 25 SAC 1212315 432 UC-EMLP (22X22) YE 0825464 234 UC-EMP (60X15) 0822259 237
TMT 4 R CUS 0824476 94 TSD-M 1,2NM 1212224 424 UC-EMLP (22X22) YE CUS 0826986 235 UC-EMP (60X15) CUS 0824569 237

TMT 4 R GN 0816346 94 TSD-M 3NM 1212225 424 UC-EMLP (27X12,5) 0825469 234 UC-EMP (60X15) SR 0827647 237
TMT 4 R GN CUS 0824478 94 TSD-M 6NM 1212226 424 UC-EMLP (27X12,5) CUS 0826967 235 UC-EMP (60X15) SR CUS 0827657 237
TMT 4 R OG 0816359 94 TSD-M SAC-BIT ADAPTER 1212600 432 UC-EMLP (27X12,5) SR 0825471 234 UC-EMP (60X15) YE 0825330 237
TMT 4 R OG CUS 0824479 94 UC-EMLP (27X12,5) SR CUS 0826969 235 UC-EMP (60X15) YE CUS 0826685 237

TMT 4 R RD 0816362 94 UC-EMLP (27X12,5) YE 0825470 234 UC-EMP (60X30) 0822275 237
TMT 4 R RD CUS 0824480 94 UC-EMLP (27X12,5) YE CUS 0826968 235 UC-EMP (60X30) CUS 0824571 237
TMT 4 R YE 0816388 94 UC-EMLP (27X18) 0825475 234 UC-EMP (60X30) SR 0827648 237
TMT 4 R YE CUS 0824481 94 U UC-EMLP (27X18) CUS 0826970 235 UC-EMP (60X30) SR CUS 0827658 237

TMT 5R 0816430 95 UBE 0800310 501 UC-EMLP (27X18) SR 0825477 234 UC-EMP (60X30) YE 0825331 237
TMT 5 R BU 0816391 95 UBE/D 0800307 501 UC-EMLP (27X18) SR CUS 0826972 235 UC-EMP (60X30) YE CUS 0826687 237
TMT 5 R BU CUS 0824483 95 UC-EM (10X7) 0825487 240 UC-EMLP (27X18) YE 0825476 234 UC-EMSP (50X15) 0828706 236
TMT 5 R CUS 0824482 95 UC-EM (10X7) CUS 0827623 240 UC-EMLP (27X18) YE CUS 0826971 235 UC-EMSP (50X15) CUS 0829103 236

TMT 5 R GN 0816401 95 UC-EM (10X7) TQ 0825488 240 UC-EMLP (27X27) 0825481 234 UC-EMSP (50X15) SR 0828708 236
TMT 5 R GN CUS 0824484 95 UC-EM (10X7) TQ CUS 0827659 240 UC-EMLP (27X27) CUS 0826973 235 UC-EMSP (50X15) SR CUS 0829105 236
TMT 5 R OG 0816414 95 UC-EM (10X8) 0825491 241 UC-EMLP (27X27) SR 0825483 234 UC-EMSP (50X15) YE 0828707 236
TMT 5 R OG CUS 0824485 95 UC-EM (10X8) CUS 0827624 241 UC-EMLP (27X27) SR CUS 0826975 235 UC-EMSP (50X15) YE CUS 0829104 236

TMT 5 R RD 0816427 95 UC-EM (10X8) TQ 0825492 241 UC-EMLP (27X27) YE 0825482 234 UC-EMSP (50X30) 0828709 236
TMT 5 R RD CUS 0824486 95 UC-EM (10X8) TQ CUS 0827660 241 UC-EMLP (27X27) YE CUS 0826974 235 UC-EMSP (50X30) CUS 0829106 236
TMT 5 R YE 0816443 95 UC-EM (17,5X7,5) 0825495 241 UC-EMLP (49X15) 0827903 234 UC-EMSP (50X30) SR 0828711 236
TMT 5 R YE CUS 0824487 95 UC-EM (17,5X7,5) CUS 0827625 241 UC-EMLP (49X15) CUS 0827947 235 UC-EMSP (50X30) SR CUS 0829108 236

TMT 6R 0816498 95 UC-EM (17,5X8) 0823766 241 UC-EMLP (49X15) SR 0827905 234 UC-EMSP (50X30) YE 0828710 236
TMT 6 R BU 0816456 95 UC-EM (17,5X8) CUS 0824567 241 UC-EMLP (49X15) SR CUS 0827948 235 UC-EMSP (50X30) YE CUS 0829107 236
TMT 6 R BU CUS 0824489 95 UC-EM (17,5X9) 0827490 242 UC-EMLP (49X15) YE 0827904 234 UC-TM 4 0818111 58
TMT 6 R CUS 0824488 95 UC-EM (17,5X9) CUS 0828238 242 UC-EMLP (49X15) YE CUS 0827949 235 UC-TM 4 BU 0818247 58

TMT 6 R GN 0816469 95 UC-EM (17,5X9) YE 0827494 242 UC-EMLP (60X15) 0819330 234 UC-TM 4 BU CUS 0824574 58
TMT 6 R GN CUS 0824490 95 UC-EM (17,5X9) YE CUS 0828239 242 UC-EMLP (60X15) CUS 0824559 235 UC-TM 4 CUS 0824573 58
TMT 6 R OG 0816472 95 UC-EM (18X8) 0825497 243 UC-EMLP (60X15) SR 0828088 234 UC-TM 4 GN 0818263 58
TMT 6 R OG CUS 0824491 95 UC-EM (18X8) CUS 0827627 242 UC-EMLP (60X15) SR CUS 0828090 235 UC-TM 4 GN CUS 0824575 58

TMT 6 R RD 0816485 95 UC-EM (19X9) 0827492 243 UC-EMLP (60X15) YE 0822644 234 UC-TM 4 OG 0818221 58
TMT 6 R RD CUS 0824492 95 UC-EM (19X9) CUS 0828240 243 UC-EMLP (60X15) YE CUS 0824560 235 UC-TM 4 OG CUS 0824576 58
TMT 6 R YE 0816508 95 UC-EM (19X9) YE 0827496 243 UC-EMLP (60X30) 0819343 234 UC-TM 4 RD 0818250 58
TMT 6 R YE CUS 0824493 95 UC-EM (19X9) YE CUS 0828241 243 UC-EMLP (60X30) CUS 0824562 235 UC-TM 4 RD CUS 0824577 58

TMT 8R 0816553 95 UC-EM (20X7) 0825499 243 UC-EMLP (60X30) SR 0828091 234 UC-TM 4 VT 0819084 58
TMT 8 R BU 0816511 95 UC-EM (20X7) CUS 0827628 243 UC-EMLP (60X30) SR CUS 0828093 235 UC-TM 4 VT CUS 0824578 58
TMT 8 R BU CUS 0824495 95 UC-EM (20X7) TQ 0825500 243 UC-EMLP (60X30) YE 0822657 234 UC-TM 4 YE 0818234 58
TMT 8 R CUS 0824494 95 UC-EM (20X7) TQ CUS 0827661 243 UC-EMLP (60X30) YE CUS 0824563 235 UC-TM 4 YE CUS 0824579 58

TMT 8 R GN 0816524 95 UC-EM (20X9) 0825503 244 UC-EMP (17X15) 0825421 237 UC-TM 5 0818108 59
TMT 8 R GN CUS 0824496 95 UC-EM (20X9) CUS 0827629 244 UC-EMP (17X15) CUS 0827626 237 UC-TM 5 BU 0818292 59
TMT 8 R OG 0816537 95 UC-EM (20X9) TQ 0825504 244 UC-EMP (17X15) SR 0825423 237 UC-TM 5 BU CUS 0824582 59
TMT 8 R OG CUS 0824497 95 UC-EM (20X9) TQ CUS 0827662 244 UC-EMP (17X15) SR CUS 0827649 237 UC-TM 5 CUS 0824581 59

TMT 8 R RD 0816540 95 UC-EM (20X9) YE 0827637 244 UC-EMP (17X15) YE 0825422 237 UC-TM 5 GN 0818315 59
TMT 8 R RD CUS 0824498 95 UC-EM (20X9) YE CUS 0827639 244 UC-EMP (17X15) YE CUS 0827638 237 UC-TM 5 GN CUS 0824583 59
TMT 8 R YE 0816566 95 UC-EM (21X8) 0825507 245 UC-EMP (27X12,5) 0825433 238 UC-TM 5 OG 0818276 59
TMT 8 R YE CUS 0824499 95 UC-EM (21X8) CUS 0827630 245 UC-EMP (27X12,5) CUS 0827632 239 UC-TM 5 OG CUS 0824584 59

TMT 10 R 0816210 96 UC-EMLP (11X9) 0819291 234 UC-EMP (27X12,5) SR 0825435 238 UC-TM 5 RD 0818302 59
TMT 10 R CUS 0824500 96 UC-EMLP (11X9) CUS 0824547 235 UC-EMP (27X12,5) SR CUS 0827652 239 UC-TM 5 RD CUS 0824585 59
TMT 100 R 0816605 97 UC-EMLP (11X9) SR 0828094 234 UC-EMP (27X12,5) YE 0825434 238 UC-TM 5 VT 0819107 59
TMT 100 R BU 0816223 97 UC-EMLP (11X9) SR CUS 0828098 235 UC-EMP (27X12,5) YE CUS 0827641 239 UC-TM 5 VT CUS 0824586 59

TMT 100 R BU CUS 0824502 97 UC-EMLP (11X9) YE 0822602 234 UC-EMP (27X15) 0825439 237 UC-TM 5 YE 0818289 59
TMT 100 R CUS 0824501 97 UC-EMLP (11X9) YE CUS 0824548 235 UC-EMP (27X15) CUS 0827633 237 UC-TM 5 YE CUS 0824587 59
TMT 100 R GN 0816579 97 UC-EMLP (15X5) 0819301 234 UC-EMP (27X15) SR 0825441 237 UC-TM 6 0818085 59
TMT 100 R GN CUS 0824503 97 UC-EMLP (15X5) CUS 0824550 235 UC-EMP (27X15) SR CUS 0827653 237 UC-TM 6 BU 0818344 59

TMT 100 R OG 0816582 97 UC-EMLP (15X5) SR 0828095 234 UC-EMP (27X15) YE 0825440 237 UC-TM 6 BU CUS 0824590 59
TMT 100 R OG CUS 0824504 97 UC-EMLP (15X5) SR CUS 0828099 235 UC-EMP (27X15) YE CUS 0827642 237 UC-TM 6 CUS 0824589 59
TMT 100 R RD 0816595 97 UC-EMLP (15X5) YE 0822615 234 UC-EMP (27X18) 0825445 238 UC-TM 6 GN 0818360 59
TMT 100 R RD CUS 0824505 97 UC-EMLP (15X5) YE CUS 0824551 235 UC-EMP (27X18) CUS 0827634 239 UC-TM 6 GN CUS 0824591 59

606 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Index
Alphabetical

Type Order No. Page Type Order No. Page Type Order No. Page Type Order No. Page

UC-TM 6 OG 0818328 59 UC-TMF 5 BU CUS 0824639 63 UC-TMF 16 YE 0819259 65 UC-WMC 4,4 (23X5,5) GN 0818917 167
UC-TM 6 OG CUS 0824592 59 UC-TMF 5 CUS 0824638 63 UC-TMF 16 YE CUS 0824684 65 UC-WMC 4,4 (23X5,5) OG 0818878 167
UC-TM 6 RD 0818357 59 UC-TMF 5 GN 0818564 63 UC-TMN 10 0828554 66 UC-WMC 4,4 (23X5,5) RD 0818904 167
UC-TM 6 RD CUS 0824593 59 UC-TMF 5 GN CUS 0824640 63 UC-TMN 10 CUS 0829109 67 UC-WMC 4,4 (23X5,5) VT 0825374 167

UC-TM 6 VT 0819110 59 UC-TMF 5 OG 0818522 63 UC-TMN 5,2 0822945 66 UC-WMC 4,4 (23X5,5) VT CUS 0826781 167
UC-TM 6 VT CUS 0824594 59 UC-TMF 5 OG CUS 0824641 63 UC-TMN 5,2 CUS 0826857 67 UC-WMC 4,4 (23X5,5) YE 0818881 167
UC-TM 6 YE 0818331 59 UC-TMF 5 RD 0818551 63 UC-TMN 7,5 0821823 66 UC-WMC 4,4 (30X 5,5) CUS 0824752 167
UC-TM 6 YE CUS 0824595 59 UC-TMF 5 RD CUS 0824642 63 UC-TMN 7,5 CUS 0824690 67 UC-WMC 4,4 (30X 5,5) YE CUS 0824753 167

UC-TM 8 0818072 59 UC-TMF 5 VT 0815907 63 UC-WMC 1,9 (15X4) 0828004 162 UC-WMC 4,4 (30X5,5) 0819657 167
UC-TM 8 BU 0818399 59 UC-TMF 5 VT CUS 0824643 63 UC-WMC 1,9 (15X4) BU 0828010 162 UC-WMC 4,4 (30X5,5) BU 0820879 167
UC-TM 8 BU CUS 0824598 59 UC-TMF 5 YE 0818535 63 UC-WMC 1,9 (15X4) BU CUS 0828017 162 UC-WMC 4,4 (30X5,5) BU CUS 0824756 167
UC-TM 8 CUS 0824597 59 UC-TMF 5 YE CUS 0824644 63 UC-WMC 1,9 (15X4) CUS 0828012 162 UC-WMC 4,4 (30X5,5) GN 0823957 167

UC-TM 8 GN 0818412 59 UC-TMF 6 0818140 63 UC-WMC 1,9 (15X4) OG 0828007 162 UC-WMC 4,4 (30X5,5) GN CUS 0824757 167
UC-TM 8 GN CUS 0824599 59 UC-TMF 6 BU 0818593 63 UC-WMC 1,9 (15X4) OG CUS 0828014 162 UC-WMC 4,4 (30X5,5) OG 0823944 167
UC-TM 8 OG 0818373 59 UC-TMF 6 BU CUS 0824647 63 UC-WMC 1,9 (15X4) RD 0828006 162 UC-WMC 4,4 (30X5,5) OG CUS 0824758 167
UC-TM 8 OG CUS 0824600 59 UC-TMF 6 CUS 0824646 63 UC-WMC 1,9 (15X4) RD CUS 0828013 162 UC-WMC 4,4 (30X5,5) RD 0820882 167

UC-TM 8 RD 0818409 59 UC-TMF 6 GN 0818616 63 UC-WMC 1,9 (15X4) VT 0828009 162 UC-WMC 4,4 (30X5,5) RD CUS 0824759 167
UC-TM 8 RD CUS 0824601 59 UC-TMF 6 GN CUS 0824648 63 UC-WMC 1,9 (15X4) VT CUS 0828016 162 UC-WMC 4,4 (30X5,5) VT 0825375 167
UC-TM 8 VT 0819123 59 UC-TMF 6 OG 0818577 63 UC-WMC 1,9 (15X4) YE 0828008 162 UC-WMC 4,4 (30X5,5) VT CUS 0826783 167
UC-TM 8 VT CUS 0824602 59 UC-TMF 6 OG CUS 0824649 63 UC-WMC 1,9 (15X4) YE CUS 0828015 162 UC-WMC 4,4 (30X5,5) YE 0819660 167

UC-TM 8 YE 0818386 59 UC-TMF 6 RD 0818603 63 UC-WMC 1,9 (30X4) 0830283 163 UC-WMC 5,6 (23X8) 0825382 168
UC-TM 8 YE CUS 0824603 59 UC-TMF 6 RD CUS 0824650 63 UC-WMC 1,9 (30X4) CUS 0830284 163 UC-WMC 5,6 (23X8) BU 0825383 168
UC-TM 10 0818069 60 UC-TMF 6 VT 0815910 63 UC-WMC 3,1 (15X 4) BU CUS 0824693 164 UC-WMC 5,6 (23X8) BU CUS 0827006 168
UC-TM 10 BU 0818441 60 UC-TMF 6 VT CUS 0824651 63 UC-WMC 3,1 (15X 4) CUS 0824692 164 UC-WMC 5,6 (23X8) CUS 0827005 168

UC-TM 10 BU CUS 0824606 60 UC-TMF 6 YE 0818580 63 UC-WMC 3,1 (15X 4) OG CUS 0824695 164 UC-WMC 5,6 (23X8) GN 0825384 168
UC-TM 10 CUS 0824605 60 UC-TMF 6 YE CUS 0824652 63 UC-WMC 3,1 (15X 4) RD CUS 0824696 164 UC-WMC 5,6 (23X8) GN CUS 0827007 168
UC-TM 10 GN 0818467 60 UC-TMF 8 0818137 63 UC-WMC 3,1 (15X 4) YE CUS 0824697 164 UC-WMC 5,6 (23X8) OG 0825385 168
UC-TM 10 GN CUS 0824607 60 UC-TMF 8 BU 0818645 63 UC-WMC 3,1 (15X4) 0818205 164 UC-WMC 5,6 (23X8) OG CUS 0827008 168

UC-TM 10 OG 0818425 60 UC-TMF 8 BU CUS 0824655 63 UC-WMC 3,1 (15X4) BU 0818742 164 UC-WMC 5,6 (23X8) RD 0825387 168
UC-TM 10 OG CUS 0824608 60 UC-TMF 8 CUS 0824654 63 UC-WMC 3,1 (15X4) OG 0818726 164 UC-WMC 5,6 (23X8) RD CUS 0827009 168
UC-TM 10 RD 0818454 60 UC-TMF 8 GN 0818661 63 UC-WMC 3,1 (15X4) RD 0818755 164 UC-WMC 5,6 (23X8) VT 0825388 168
UC-TM 10 RD CUS 0824609 60 UC-TMF 8 GN CUS 0824656 63 UC-WMC 3,1 (15X4) VT 0825370 164 UC-WMC 5,6 (23X8) VT CUS 0827010 168

UC-TM 10 VT 0815936 60 UC-TMF 8 OG 0818629 63 UC-WMC 3,1 (15X4) VT CUS 0826773 164 UC-WMC 5,6 (23X8) YE 0825386 168
UC-TM 10 VT CUS 0824610 60 UC-TMF 8 OG CUS 0824657 63 UC-WMC 3,1 (15X4) YE 0818739 164 UC-WMC 5,6 (23X8) YE CUS 0827011 168
UC-TM 10 YE 0818438 60 UC-TMF 8 RD 0818658 63 UC-WMC 3,1 (23X 4) BU CUS 0824705 165 UC-WMC 5,6 (30X8) 0825396 169
UC-TM 10 YE CUS 0824611 60 UC-TMF 8 RD CUS 0824658 63 UC-WMC 3,1 (23X 4) CUS 0824704 165 UC-WMC 5,6 (30X8) BU 0825397 169

UC-TM 12 0819194 61 UC-TMF 8 VT 0815923 63 UC-WMC 3,1 (23X 4) OG CUS 0824707 165 UC-WMC 5,6 (30X8) BU CUS 0827013 169
UC-TM 12 BU 0817785 61 UC-TMF 8 VT CUS 0824659 63 UC-WMC 3,1 (23X 4) RD CUS 0824708 165 UC-WMC 5,6 (30X8) CUS 0827012 169
UC-TM 12 BU CUS 0824614 61 UC-TMF 8 YE 0818632 63 UC-WMC 3,1 (23X 4) YE CUS 0824709 165 UC-WMC 5,6 (30X8) GN 0825398 169
UC-TM 12 CUS 0824613 61 UC-TMF 8 YE CUS 0824660 63 UC-WMC 3,1 (23X4) 0818218 165 UC-WMC 5,6 (30X8) GN CUS 0827014 169

UC-TM 12 GN 0817808 61 UC-TMF 10 0818124 64 UC-WMC 3,1 (23X4) BU 0818797 165 UC-WMC 5,6 (30X8) OG 0825399 169
UC-TM 12 GN CUS 0824615 61 UC-TMF 10 BU 0818690 64 UC-WMC 3,1 (23X4) OG 0818771 165 UC-WMC 5,6 (30X8) OG CUS 0827015 169
UC-TM 12 OG 0817691 61 UC-TMF 10 BU CUS 0824663 64 UC-WMC 3,1 (23X4) RD 0818807 165 UC-WMC 5,6 (30X8) RD 0825401 169
UC-TM 12 OG CUS 0824616 61 UC-TMF 10 CUS 0824662 64 UC-WMC 3,1 (23X4) VT 0825371 165 UC-WMC 5,6 (30X8) RD CUS 0827016 169

UC-TM 12 RD 0817701 61 UC-TMF 10 GN 0818713 64 UC-WMC 3,1 (23X4) VT CUS 0826775 165 UC-WMC 5,6 (30X8) VT 0825402 169
UC-TM 12 RD CUS 0824617 61 UC-TMF 10 GN CUS 0824664 64 UC-WMC 3,1 (23X4) YE 0818784 165 UC-WMC 5,6 (30X8) VT CUS 0827017 169
UC-TM 12 VT 0822660 61 UC-TMF 10 OG 0818674 64 UC-WMC 3,1 (30X4) 0819631 165 UC-WMC 5,6 (30X8) YE 0825400 169
UC-TM 12 VT CUS 0824618 61 UC-TMF 10 OG CUS 0824665 64 UC-WMC 3,1 (30X4) BU 0820756 165 UC-WMC 5,6 (30X8) YE CUS 0827018 169

UC-TM 12 YE 0819204 61 UC-TMF 10 RD 0818700 64 UC-WMC 3,1 (30X4) BU CUS 0824720 165 UC-WMC 7,5 (23X 8) RD CUS 0824764 169
UC-TM 12 YE CUS 0824619 61 UC-TMF 10 RD CUS 0824666 64 UC-WMC 3,1 (30X4) CUS 0824716 165 UC-WMC 7,5 (23X8) 0818179 169
UC-TM 16 0819217 61 UC-TMF 10 VT 0815981 64 UC-WMC 3,1 (30X4) OG 0823863 165 UC-WMC 7,5 (23X8) BU 0818946 169
UC-TM 16 BU 0817769 61 UC-TMF 10 VT CUS 0824667 64 UC-WMC 3,1 (30X4) OG CUS 0824722 165 UC-WMC 7,5 (23X8) BU CUS 0824768 169

UC-TM 16 BU CUS 0824622 61 UC-TMF 10 YE 0818687 64 UC-WMC 3,1 (30X4) RD 0820769 165 UC-WMC 7,5 (23X8) CUS 0824767 169
UC-TM 16 CUS 0824621 61 UC-TMF 10 YE CUS 0824668 64 UC-WMC 3,1 (30X4) RD CUS 0824723 165 UC-WMC 7,5 (23X8) GN 0818959 169
UC-TM 16 GN 0817756 61 UC-TMF 12 0819233 65 UC-WMC 3,1 (30X4) VT 0825372 165 UC-WMC 7,5 (23X8) GN CUS 0824769 169
UC-TM 16 GN CUS 0824623 61 UC-TMF 12 BU 0817853 65 UC-WMC 3,1 (30X4) VT CUS 0826777 165 UC-WMC 7,5 (23X8) OG 0818920 169

UC-TM 16 OG 0817772 61 UC-TMF 12 BU CUS 0824671 65 UC-WMC 3,1 (30X4) YE 0819644 165 UC-WMC 7,5 (23X8) OG CUS 0824770 169
UC-TM 16 OG CUS 0824624 61 UC-TMF 12 CUS 0824670 65 UC-WMC 3,1 (30X4) YE CUS 0824717 165 UC-WMC 7,5 (23X8) RD 0819039 169
UC-TM 16 RD 0817798 61 UC-TMF 12 GN 0817837 65 UC-WMC 4,4 (15X 5,5) BU CUS 0824729 166 UC-WMC 7,5 (23X8) VT 0825376 169
UC-TM 16 RD CUS 0824625 61 UC-TMF 12 GN CUS 0824672 65 UC-WMC 4,4 (15X 5,5) CUS 0824728 166 UC-WMC 7,5 (23X8) VT CUS 0826785 169

UC-TM 16 VT 0822673 61 UC-TMF 12 OG 0817866 65 UC-WMC 4,4 (15X 5,5) GN CUS 0824730 166 UC-WMC 7,5 (23X8) YE 0818933 169
UC-TM 16 VT CUS 0824626 61 UC-TMF 12 OG CUS 0824673 65 UC-WMC 4,4 (15X 5,5) OG CUS 0824731 166 UC-WMC 7,5 (23X8) YE CUS 0824771 169
UC-TM 16 YE 0819220 61 UC-TMF 12 RD 0817840 65 UC-WMC 4,4 (15X 5,5) RD CUS 0824732 166 UC-WMC 7,5 (30X 8) CUS 0824776 169
UC-TM 16 YE CUS 0824627 61 UC-TMF 12 RD CUS 0824674 65 UC-WMC 4,4 (15X 5,5) YE CUS 0824733 166 UC-WMC 7,5 (30X 8) YE CUS 0824777 169

UC-TMF 4 0818166 62 UC-TMF 12 VT 0822686 65 UC-WMC 4,4 (15X5,5) 0818182 166 UC-WMC 7,5 (30X8) 0819673 169
UC-TMF 4 BU 0818496 62 UC-TMF 12 VT CUS 0824675 65 UC-WMC 4,4 (15X5,5) BU 0818849 166 UC-WMC 7,5 (30X8) BU 0820950 169
UC-TMF 4 BU CUS 0824631 62 UC-TMF 12 YE 0819246 65 UC-WMC 4,4 (15X5,5) GN 0818865 166 UC-WMC 7,5 (30X8) BU CUS 0824780 169
UC-TMF 4 CUS 0824630 62 UC-TMF 12 YE CUS 0824676 65 UC-WMC 4,4 (15X5,5) OG 0818823 166 UC-WMC 7,5 (30X8) GN 0823708 169

UC-TMF 4 GN 0818519 62 UC-TMF 16 0819262 65 UC-WMC 4,4 (15X5,5) RD 0818852 166 UC-WMC 7,5 (30X8) GN CUS 0824781 169
UC-TMF 4 GN CUS 0824632 62 UC-TMF 16 BU 0817905 65 UC-WMC 4,4 (15X5,5) VT 0825373 166 UC-WMC 7,5 (30X8) OG 0823724 169
UC-TMF 4 OG 0818470 62 UC-TMF 16 BU CUS 0824679 65 UC-WMC 4,4 (15X5,5) VT CUS 0826779 166 UC-WMC 7,5 (30X8) OG CUS 0824782 169
UC-TMF 4 OG CUS 0824633 62 UC-TMF 16 CUS 0824678 65 UC-WMC 4,4 (15X5,5) YE 0818836 166 UC-WMC 7,5 (30X8) RD 0820963 169

UC-TMF 4 RD 0818506 62 UC-TMF 16 GN 0817921 65 UC-WMC 4,4 (23X 5,5) BU CUS 0824741 167 UC-WMC 7,5 (30X8) RD CUS 0824783 169
UC-TMF 4 RD CUS 0824634 62 UC-TMF 16 GN CUS 0824680 65 UC-WMC 4,4 (23X 5,5) CUS 0824740 167 UC-WMC 7,5 (30X8) VT 0825377 169
UC-TMF 4 VT 0815897 62 UC-TMF 16 OG 0817811 65 UC-WMC 4,4 (23X 5,5) GN CUS 0824742 167 UC-WMC 7,5 (30X8) VT CUS 0826787 169
UC-TMF 4 VT CUS 0824635 62 UC-TMF 16 OG CUS 0824681 65 UC-WMC 4,4 (23X 5,5) OG CUS 0824743 167 UC-WMC 7,5 (30X8) YE 0819686 169

UC-TMF 4 YE 0818483 62 UC-TMF 16 RD 0817824 65 UC-WMC 4,4 (23X 5,5) RD CUS 0824744 167 UC-WMCO 1,6 (12X3) 0827092 170
UC-TMF 4 YE CUS 0824636 62 UC-TMF 16 RD CUS 0824682 65 UC-WMC 4,4 (23X 5,5) YE CUS 0824745 167 UC-WMCO 1,6 (12X3) BU 0827514 170
UC-TMF 5 0818153 63 UC-TMF 16 VT 0822699 65 UC-WMC 4,4 (23X5,5) 0818195 167 UC-WMCO 1,6 (12X3) BU CUS 0829034 170
UC-TMF 5 BU 0818548 63 UC-TMF 16 VT CUS 0824683 65 UC-WMC 4,4 (23X5,5) BU 0818894 167 UC-WMCO 1,6 (12X3) CUS 0829032 170

PHOENIX CONTACT 607

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Index
Alphabetical

Type Order No. Page Type Order No. Page Type Order No. Page Type Order No. Page

UC-WMCO 1,6 (12X3) GN 0827515 170 UC-WMCO 2,9 (21X3,5) YE CUS 0829068 173 UC-WMT (12X4) OG 0823588 177 UC-WMTB (44X15) YE CUS 0829409 179
UC-WMCO 1,6 (12X3) GN CUS 0829035 170 UC-WMCO 3,6 (12X4,5) 0827176 173 UC-WMT (12X4) OG CUS 0827036 177 UC-WMTB (52X30) 5775288 179
UC-WMCO 1,6 (12X3) OG 0827517 170 UC-WMCO 3,6 (12X4,5) BU 0827586 173 UC-WMT (12X4) RD 0823614 177 UC-WMTB (52X30) CUS 0829432 179
UC-WMCO 1,6 (12X3) OG CUS 0829037 170 UC-WMCO 3,6 (12X4,5) BU CUS 0829076 173 UC-WMT (12X4) RD CUS 0827035 177 UC-WMTB (52X50) 5775289 179

UC-WMCO 1,6 (12X3) RD 0827516 170 UC-WMCO 3,6 (12X4,5) CUS 0829074 173 UC-WMT (12X4) VT 0825378 177 UC-WMTB (52X50) CUS 0829433 179
UC-WMCO 1,6 (12X3) RD CUS 0829036 170 UC-WMCO 3,6 (12X4,5) GN 0827587 173 UC-WMT (12X4) VT CUS 0827038 177 UC-WMTBA (24X5) 0820426 180
UC-WMCO 1,6 (12X3) VT 0827518 170 UC-WMCO 3,6 (12X4,5) GN CUS 0829077 173 UC-WMT (12X4) YE 0823591 177 UC-WMTBA (24X5) BU 0820552 180
UC-WMCO 1,6 (12X3) VT CUS 0829038 170 UC-WMCO 3,6 (12X4,5) OG 0827589 173 UC-WMT (12X4) YE CUS 0827037 177 UC-WMTBA (24X5) BU CUS 0824861 180

UC-WMCO 1,6 (12X3) YE 0827513 170 UC-WMCO 3,6 (12X4,5) OG CUS 0829079 173 UC-WMT (15X 4) BU CUS 0824813 177 UC-WMTBA (24X5) CUS 0824860 180
UC-WMCO 1,6 (12X3) YE CUS 0829033 170 UC-WMCO 3,6 (12X4,5) RD 0827588 173 UC-WMT (15X 4) CUS 0824812 177 UC-WMTBA (24X5) GN 0825343 180
UC-WMCO 1,6 (21X3) 0827106 171 UC-WMCO 3,6 (12X4,5) RD CUS 0829078 173 UC-WMT (15X 4) RD CUS 0824814 177 UC-WMTBA (24X5) GN CUS 0826799 180
UC-WMCO 1,6 (21X3) BU 0827526 171 UC-WMCO 3,6 (12X4,5) VT 0827590 173 UC-WMT (15X 4) YE CUS 0824815 177 UC-WMTBA (24X5) OG 0825342 180

UC-WMCO 1,6 (21X3) BU CUS 0829041 171 UC-WMCO 3,6 (12X4,5) VT CUS 0829080 173 UC-WMT (15X4) 0819398 177 UC-WMTBA (24X5) OG CUS 0826800 180
UC-WMCO 1,6 (21X3) CUS 0829039 171 UC-WMCO 3,6 (12X4,5) YE 0827585 173 UC-WMT (15X4) BU 0821030 177 UC-WMTBA (24X5) RD 0820565 180
UC-WMCO 1,6 (21X3) GN 0827527 171 UC-WMCO 3,6 (12X4,5) YE CUS 0829075 173 UC-WMT (15X4) GN 0824040 177 UC-WMTBA (24X5) RD CUS 0824862 180
UC-WMCO 1,6 (21X3) GN CUS 0829042 171 UC-WMCO 3,6 (21X4,5) 0827190 173 UC-WMT (15X4) GN CUS 0824820 177 UC-WMTBA (24X5) VT 0825344 180

UC-WMCO 1,6 (21X3) OG 0827529 171 UC-WMCO 3,6 (21X4,5) BU 0827598 173 UC-WMT (15X4) OG 0824037 177 UC-WMTBA (24X5) VT CUS 0826801 180
UC-WMCO 1,6 (21X3) OG CUS 0829044 171 UC-WMCO 3,6 (21X4,5) BU CUS 0829083 173 UC-WMT (15X4) OG CUS 0824821 177 UC-WMTBA (24X5) YE 0820439 180
UC-WMCO 1,6 (21X3) RD 0827528 171 UC-WMCO 3,6 (21X4,5) CUS 0829081 173 UC-WMT (15X4) RD 0821043 177 UC-WMTBA (24X5) YE CUS 0824863 180
UC-WMCO 1,6 (21X3) RD CUS 0829043 171 UC-WMCO 3,6 (21X4,5) GN 0827599 173 UC-WMT (15X4) VT 0825361 177 UC-WMTBA (29X8) 0820183 181

UC-WMCO 1,6 (21X3) VT 0827530 171 UC-WMCO 3,6 (21X4,5) GN CUS 0829084 173 UC-WMT (15X4) VT CUS 0826791 177 UC-WMTBA (29X8) BU 0820594 181
UC-WMCO 1,6 (21X3) VT CUS 0829045 171 UC-WMCO 3,6 (21X4,5) OG 0827601 173 UC-WMT (15X4) YE 0819408 177 UC-WMTBA (29X8) BU CUS 0824869 181
UC-WMCO 1,6 (21X3) YE 0827525 171 UC-WMCO 3,6 (21X4,5) OG CUS 0829086 173 UC-WMT (18X4) 0820293 177 UC-WMTBA (29X8) CUS 0824868 181
UC-WMCO 1,6 (21X3) YE CUS 0829040 171 UC-WMCO 3,6 (21X4,5) RD 0827600 173 UC-WMT (18X4) BU 0821072 177 UC-WMTBA (29X8) GN 0825346 181

UC-WMCO 2,1 (12X3) 0827120 171 UC-WMCO 3,6 (21X4,5) RD CUS 0829085 173 UC-WMT (18X4) BU CUS 0824825 177 UC-WMTBA (29X8) GN CUS 0826805 181
UC-WMCO 2,1 (12X3) BU 0827538 171 UC-WMCO 3,6 (21X4,5) VT 0827602 173 UC-WMT (18X4) CUS 0824824 177 UC-WMTBA (29X8) OG 0825345 181
UC-WMCO 2,1 (12X3) BU CUS 0829048 171 UC-WMCO 3,6 (21X4,5) VT CUS 0829087 173 UC-WMT (18X4) GN 0824082 177 UC-WMTBA (29X8) OG CUS 0826806 181
UC-WMCO 2,1 (12X3) CUS 0829046 171 UC-WMCO 3,6 (21X4,5) YE 0827597 173 UC-WMT (18X4) GN CUS 0824832 177 UC-WMTBA (29X8) RD 0820604 181

UC-WMCO 2,1 (12X3) GN 0827539 171 UC-WMCO 3,6 (21X4,5) YE CUS 0829082 173 UC-WMT (18X4) OG 0824079 177 UC-WMTBA (29X8) RD CUS 0824870 181
UC-WMCO 2,1 (12X3) GN CUS 0829049 171 UC-WMCO 3,6 TOOL 0827804 172 UC-WMT (18X4) OG CUS 0824833 177 UC-WMTBA (29X8) VT 0825347 181
UC-WMCO 2,1 (12X3) OG 0827541 171 UC-WMCO 4,9 (12X5) 0827733 174 UC-WMT (18X4) RD 0821085 177 UC-WMTBA (29X8) VT CUS 0826807 181
UC-WMCO 2,1 (12X3) OG CUS 0829051 171 UC-WMCO 4,9 (12X5) BU 0827735 174 UC-WMT (18X4) RD CUS 0824826 177 UC-WMTBA (29X8) YE 0820390 181

UC-WMCO 2,1 (12X3) RD 0827540 171 UC-WMCO 4,9 (12X5) BU CUS 0829090 174 UC-WMT (18X4) VT 0825362 177 UC-WMTBA (29X8) YE CUS 0824871 181
UC-WMCO 2,1 (12X3) RD CUS 0829050 171 UC-WMCO 4,9 (12X5) CUS 0829088 174 UC-WMT (18X4) VT CUS 0826793 177 UC-WMTBA (60X11) 0820468 181
UC-WMCO 2,1 (12X3) VT 0827542 171 UC-WMCO 4,9 (12X5) GN 0827736 174 UC-WMT (18X4) YE 0820303 177 UC-WMTBA (60X11) BU 0820633 181
UC-WMCO 2,1 (12X3) VT CUS 0829052 171 UC-WMCO 4,9 (12X5) GN CUS 0829091 174 UC-WMT (18X4) YE CUS 0824827 177 UC-WMTBA (60X11) BU CUS 0824877 181

UC-WMCO 2,1 (12X3) YE 0827537 171 UC-WMCO 4,9 (12X5) OG 0827738 174 UC-WMT (23X4) 0819411 178 UC-WMTBA (60X11) CUS 0824876 181
UC-WMCO 2,1 (12X3) YE CUS 0829047 171 UC-WMCO 4,9 (12X5) OG CUS 0829093 174 UC-WMT (23X4) BU 0821111 178 UC-WMTBA (60X11) GN 0825349 181
UC-WMCO 2,1 (21X3) 0827134 171 UC-WMCO 4,9 (12X5) RD 0827737 174 UC-WMT (23X4) BU CUS 0824839 178 UC-WMTBA (60X11) GN CUS 0826811 181
UC-WMCO 2,1 (21X3) BU 0807550 171 UC-WMCO 4,9 (12X5) RD CUS 0829092 174 UC-WMT (23X4) CUS 0824838 178 UC-WMTBA (60X11) OG 0825348 181

UC-WMCO 2,1 (21X3) BU CUS 0829055 171 UC-WMCO 4,9 (12X5) VT 0827739 174 UC-WMT (23X4) GN 0824121 178 UC-WMTBA (60X11) OG CUS 0826812 181
UC-WMCO 2,1 (21X3) CUS 0829053 171 UC-WMCO 4,9 (12X5) VT CUS 0829094 174 UC-WMT (23X4) GN CUS 0824840 178 UC-WMTBA (60X11) RD 0820646 181
UC-WMCO 2,1 (21X3) GN 0827551 171 UC-WMCO 4,9 (12X5) YE 0827734 174 UC-WMT (23X4) OG 0824118 178 UC-WMTBA (60X11) RD CUS 0824878 181
UC-WMCO 2,1 (21X3) GN CUS 0829056 171 UC-WMCO 4,9 (12X5) YE CUS 0829089 174 UC-WMT (23X4) OG CUS 0824841 178 UC-WMTBA (60X11) VT 0825350 181

UC-WMCO 2,1 (21X3) OG 0827553 171 UC-WMCO 4,9 (21X5) 0827747 174 UC-WMT (23X4) RD 0821124 178 UC-WMTBA (60X11) VT CUS 0826813 181
UC-WMCO 2,1 (21X3) OG CUS 0829058 171 UC-WMCO 4,9 (21X5) BU 0827749 174 UC-WMT (23X4) RD CUS 0824842 178 UC-WMTBA (60X11) YE 0820471 181
UC-WMCO 2,1 (21X3) RD 0827552 171 UC-WMCO 4,9 (21X5) BU CUS 0829097 174 UC-WMT (23X4) VT 0825363 178 UC-WMTBA (60X11) YE CUS 0824879 181
UC-WMCO 2,1 (21X3) RD CUS 0829057 171 UC-WMCO 4,9 (21X5) CUS 0829095 174 UC-WMT (23X4) VT CUS 0826795 178 UC1-TM 5 0821784 118

UC-WMCO 2,1 (21X3) VT 0827554 171 UC-WMCO 4,9 (21X5) GN 0827750 174 UC-WMT (23X4) YE 0819424 178 UC1-TM 5 BU 0828188 118
UC-WMCO 2,1 (21X3) VT CUS 0829059 171 UC-WMCO 4,9 (21X5) GN CUS 0829098 174 UC-WMT (23X4) YE CUS 0824843 178 UC1-TM 5 BU CUS 0828321 118
UC-WMCO 2,1 (21X3) YE 0827549 171 UC-WMCO 4,9 (21X5) OG 0827752 174 UC-WMT (30X 4) CUS 0824848 178 UC1-TM 5 CUS 0824507 118
UC-WMCO 2,1 (21X3) YE CUS 0829054 171 UC-WMCO 4,9 (21X5) OG CUS 0829100 174 UC-WMT (30X 4) YE CUS 0824849 178 UC1-TM 5 GN 0828189 118

UC-WMCO 2,1 TOOL 0827803 170 UC-WMCO 4,9 (21X5) RD 0827751 174 UC-WMT (30X4) 0819437 178 UC1-TM 5 GN CUS 0828322 118
UC-WMCO 2,9 (12X3,5) 0827148 172 UC-WMCO 4,9 (21X5) RD CUS 0829099 174 UC-WMT (30X4) BU 0821153 178 UC1-TM 5 OG 0828186 118
UC-WMCO 2,9 (12X3,5) BU 0827562 172 UC-WMCO 4,9 (21X5) VT 0827753 174 UC-WMT (30X4) BU CUS 0824852 178 UC1-TM 5 OG CUS 0828319 118
UC-WMCO 2,9 (12X3,5) BU CUS 0829062 172 UC-WMCO 4,9 (21X5) VT CUS 0829101 174 UC-WMT (30X4) GN 0824163 178 UC1-TM 5 RD 0828185 118

UC-WMCO 2,9 (12X3,5) CUS 0829060 172 UC-WMCO 4,9 (21X5) YE 0827748 174 UC-WMT (30X4) GN CUS 0824853 178 UC1-TM 5 RD CUS 0828318 118
UC-WMCO 2,9 (12X3,5) GN 0827563 172 UC-WMCO 4,9 (21X5) YE CUS 0829096 174 UC-WMT (30X4) OG 0824150 178 UC1-TM 5 YE 0828187 118
UC-WMCO 2,9 (12X3,5) GN CUS 0829063 172 UC-WMCO 5,8 TOOL 0827805 174 UC-WMT (30X4) OG CUS 0824854 178 UC1-TM 5 YE CUS 0828320 118
UC-WMCO 2,9 (12X3,5) OG 0827565 172 UC-WMCO TOOL SET 0827807 170 UC-WMT (30X4) RD 0821166 178 UC1-TM 6 0821247 119

UC-WMCO 2,9 (12X3,5) OG CUS 0829065 172 UC-WMT (10X 4) BU CUS 0824789 176 UC-WMT (30X4) RD CUS 0824855 178 UC1-TM 6 BU 0828193 119
UC-WMCO 2,9 (12X3,5) RD 0827564 172 UC-WMT (10X 4) CUS 0824788 176 UC-WMT (30X4) VT 0825364 178 UC1-TM 6 BU CUS 0828326 119
UC-WMCO 2,9 (12X3,5) RD CUS 0829064 172 UC-WMT (10X 4) RD CUS 0824790 176 UC-WMT (30X4) VT CUS 0826797 178 UC1-TM 6 CUS 0824509 119
UC-WMCO 2,9 (12X3,5) VT 0827566 172 UC-WMT (10X 4) YE CUS 0824791 176 UC-WMT (30X4) YE 0819440 178 UC1-TM 6 GN 0828194 119

UC-WMCO 2,9 (12X3,5) VT CUS 0829066 172 UC-WMT (10X4) 0819372 176 UC-WMTB (44X15) 0828376 179 UC1-TM 6 GN CUS 0828327 119
UC-WMCO 2,9 (12X3,5) YE 0827561 172 UC-WMT (10X4) BU 0820992 176 UC-WMTB (44X15) BN 0828384 179 UC1-TM 6 OG 0828191 119
UC-WMCO 2,9 (12X3,5) YE CUS 0829061 172 UC-WMT (10X4) GN 0823999 176 UC-WMTB (44X15) BN CUS 0829402 179 UC1-TM 6 OG CUS 0828324 119
UC-WMCO 2,9 (21X3,5) 0827162 173 UC-WMT (10X4) GN CUS 0824795 176 UC-WMTB (44X15) BU 0828381 179 UC1-TM 6 RD 0828190 119

UC-WMCO 2,9 (21X3,5) BU 0827574 173 UC-WMT (10X4) OG 0823986 176 UC-WMTB (44X15) BU CUS 0829403 179 UC1-TM 6 RD CUS 0828323 119
UC-WMCO 2,9 (21X3,5) BU CUS 0829069 173 UC-WMT (10X4) OG CUS 0824796 176 UC-WMTB (44X15) CUS 0829379 179 UC1-TM 6 YE 0828192 119
UC-WMCO 2,9 (21X3,5) CUS 0829067 173 UC-WMT (10X4) RD 0821001 176 UC-WMTB (44X15) GN 0828382 179 UC1-TM 6 YE CUS 0828325 119
UC-WMCO 2,9 (21X3,5) GN 0827575 173 UC-WMT (10X4) VT 0825360 176 UC-WMTB (44X15) GN CUS 0829404 179 UC1-TM 8 0821739 119

UC-WMCO 2,9 (21X3,5) GN CUS 0829070 173 UC-WMT (10X4) VT CUS 0826789 176 UC-WMTB (44X15) OG 0828378 179 UC1-TM 8 BU 0828198 119
UC-WMCO 2,9 (21X3,5) OG 0827577 173 UC-WMT (10X4) YE 0819385 176 UC-WMTB (44X15) OG CUS 0829405 179 UC1-TM 8 BU CUS 0828331 119
UC-WMCO 2,9 (21X3,5) OG CUS 0829072 173 UC-WMT (12X4) 0823517 177 UC-WMTB (44X15) RD 0828377 179 UC1-TM 8 CUS 0824511 119
UC-WMCO 2,9 (21X3,5) RD 0827576 173 UC-WMT (12X4) BU 0823575 177 UC-WMTB (44X15) SR 0828383 179 UC1-TM 8 GN 0828199 119

UC-WMCO 2,9 (21X3,5) RD CUS 0829071 173 UC-WMT (12X4) BU CUS 0827039 177 UC-WMTB (44X15) SR CUS 0829407 179 UC1-TM 8 GN CUS 0828332 119
UC-WMCO 2,9 (21X3,5) VT 0827578 173 UC-WMT (12X4) CUS 0827033 177 UC-WMTB (44X15) VT 0828380 179 UC1-TM 8 OG 0828196 119
UC-WMCO 2,9 (21X3,5) VT CUS 0829073 173 UC-WMT (12X4) GN 0823601 177 UC-WMTB (44X15) VT CUS 0829408 179 UC1-TM 8 OG CUS 0828329 119
UC-WMCO 2,9 (21X3,5) YE 0827573 173 UC-WMT (12X4) GN CUS 0827040 177 UC-WMTB (44X15) YE 0828379 179 UC1-TM 8 RD 0828195 119

608 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Index
Alphabetical

Type Order No. Page Type Order No. Page Type Order No. Page Type Order No. Page

UC1-TM 8 RD CUS 0828328 119 UCT-EM (10X7) TQ CUS 0801586 249 UCT-TM 12 RD CUS 0829631 85 UCT-TM 7,62 GN CUS 0829615 84
UC1-TM 8 YE 0828197 119 UCT-EM (10X8) 0801485 249 UCT-TM 12 VT 0829176 85 UCT-TM 7,62 OG 0829511 84
UC1-TM 8 YE CUS 0828330 119 UCT-EM (10X8) CUS 0801570 249 UCT-TM 12 VT CUS 0829634 85 UCT-TM 7,62 OG CUS 0829611 84
UC1-TMF 4 0821360 120 UCT-EM (10X8) TQ 0801486 249 UCT-TM 12 YE 0829145 85 UCT-TM 7,62 RD 0829510 84

UC1-TMF 4 BU 0828203 120 UCT-EM (10X8) TQ CUS 0801572 249 UCT-TM 12 YE CUS 0829633 85 UCT-TM 7,62 RD CUS 0829610 84
UC1-TMF 4 BU CUS 0828336 120 UCT-EM (12X3,3) 0801502 250 UCT-TM 16 0829146 85 UCT-TM 7,62 VT 0829512 84
UC1-TMF 4 CUS 0824513 120 UCT-EM (12X3,3) CUS 0801577 250 UCT-TM 16 BU 0829182 85 UCT-TM 7,62 VT CUS 0829613 84
UC1-TMF 4 GN 0828204 120 UCT-EM (12X6) 0801503 251 UCT-TM 16 BU CUS 0829642 85 UCT-TM 7,62 YE 0828739 84

UC1-TMF 4 GN CUS 0828337 120 UCT-EM (12X6) CUS 0801578 251 UCT-TM 16 CUS 0829637 85 UCT-TM 7,62 YE CUS 0829612 84
UC1-TMF 4 OG 0828201 120 UCT-EM (12X7) 0801501 251 UCT-TM 16 GN 0829183 85 UCT-TM 8 0828740 84
UC1-TMF 4 OG CUS 0828334 120 UCT-EM (12X7) CUS 0801587 251 UCT-TM 16 GN CUS 0829643 85 UCT-TM 8 BU 0829167 84
UC1-TMF 4 RD 0828200 120 UCT-EM (15X10) 0801504 251 UCT-TM 16 OG 0829180 85 UCT-TM 8 BU CUS 0829621 84

UC1-TMF 4 RD CUS 0828333 120 UCT-EM (15X10) CUS 0801588 251 UCT-TM 16 OG CUS 0829639 85 UCT-TM 8 CUS 0829616 84
UC1-TMF 4 YE 0828202 120 UCT-EM (17,5X7,5) 0801482 253 UCT-TM 16 RD 0829179 85 UCT-TM 8 GN 0829168 84
UC1-TMF 4 YE CUS 0828335 120 UCT-EM (17,5X7,5) CUS 0801566 253 UCT-TM 16 RD CUS 0829638 85 UCT-TM 8 GN CUS 0829622 84
UC1-TMF 5 0821425 121 UCT-EM (17,5X8) 0801496 254 UCT-TM 16 VT 0829181 85 UCT-TM 8 OG 0829165 84

UC1-TMF 5 BU 0828207 121 UCT-EM (17,5X8) CUS 0801582 254 UCT-TM 16 VT CUS 0829641 85 UCT-TM 8 OG CUS 0829618 84
UC1-TMF 5 BU CUS 0828341 121 UCT-EM (17,5X9) 0801491 255 UCT-TM 16 YE 0829147 85 UCT-TM 8 RD 0829164 84
UC1-TMF 5 CUS 0824515 121 UCT-EM (17,5X9) CUS 0801575 255 UCT-TM 16 YE CUS 0829640 85 UCT-TM 8 RD CUS 0829617 84
UC1-TMF 5 GN 0828208 121 UCT-EM (17,5X9) YE 0801492 255 UCT-TM 3,5 0829484 82 UCT-TM 8 VT 0829166 84

UC1-TMF 5 GN CUS 0828342 121 UCT-EM (17,5X9) YE CUS 0801576 255 UCT-TM 3,5 BU 0829508 82 UCT-TM 8 VT CUS 0829620 84
UC1-TMF 5 OG 0828206 121 UCT-EM (17X10) 0801483 253 UCT-TM 3,5 BU CUS 0829586 82 UCT-TM 8 YE 0828741 84
UC1-TMF 5 OG CUS 0828339 121 UCT-EM (17X10) CUS 0801567 253 UCT-TM 3,5 CUS 0829581 82 UCT-TM 8 YE CUS 0829619 84
UC1-TMF 5 RD 0828205 121 UCT-EM (17X10) YE 0801484 253 UCT-TM 3,5 GN 0829509 82 UCT-TMF 10 0829204 89

UC1-TMF 5 RD CUS 0828338 121 UCT-EM (17X10) YE CUS 0801569 253 UCT-TM 3,5 GN CUS 0829587 82 UCT-TMF 10 BU 0829209 89
UC1-TMF 5 YE 0828127 121 UCT-EM (17X8) 0801842 253 UCT-TM 3,5 OG 0829506 82 UCT-TMF 10 BU CUS 0829684 89
UC1-TMF 5 YE CUS 0828340 121 UCT-EM (17X8) CUS 1014400 253 UCT-TM 3,5 OG CUS 0829583 82 UCT-TMF 10 CUS 0829679 89
UC1-TMF 6 0821483 121 UCT-EM (17X9) 0801475 252 UCT-TM 3,5 RD 0829505 82 UCT-TMF 10 GN 0829210 89

UC1-TMF 6 BU 0828212 121 UCT-EM (17X9) CUS 0801559 252 UCT-TM 3,5 RD CUS 0829582 82 UCT-TMF 10 GN CUS 0829685 89
UC1-TMF 6 BU CUS 0828346 121 UCT-EM (17X9) YE 0801476 252 UCT-TM 3,5 VT 0829507 82 UCT-TMF 10 OG 0829206 89
UC1-TMF 6 CUS 0824517 121 UCT-EM (17X9) YE CUS 0801560 252 UCT-TM 3,5 VT CUS 0829585 82 UCT-TMF 10 OG CUS 0829681 89
UC1-TMF 6 GN 0828213 121 UCT-EM (18X8) 0801488 255 UCT-TM 3,5 YE 0829485 82 UCT-TMF 10 RD 0829205 89

UC1-TMF 6 GN CUS 0828347 121 UCT-EM (18X8) CUS 0801573 255 UCT-TM 3,5 YE CUS 0829584 82 UCT-TMF 10 RD CUS 0829680 89
UC1-TMF 6 OG 0828210 121 UCT-EM (20X7) 0801494 255 UCT-TM 4 0828732 83 UCT-TMF 10 VT 0829208 89
UC1-TMF 6 OG CUS 0828344 121 UCT-EM (20X7) CUS 0801580 255 UCT-TM 4 BU 0829152 83 UCT-TMF 10 VT CUS 0829683 89
UC1-TMF 6 RD 0828209 121 UCT-EM (20X7) TQ 0801495 255 UCT-TM 4 BU CUS 0829593 83 UCT-TMF 10 YE 0829207 89

UC1-TMF 6 RD CUS 0828343 121 UCT-EM (20X7) TQ CUS 0801581 255 UCT-TM 4 CUS 0829588 83 UCT-TMF 10 YE CUS 0829682 89
UC1-TMF 6 YE 0828211 121 UCT-EM (20X8) 0801477 256 UCT-TM 4 GN 0829153 83 UCT-TMF 12 0829214 89
UC1-TMF 6 YE CUS 0828345 121 UCT-EM (20X8) CUS 0801561 256 UCT-TM 4 GN CUS 0829594 83 UCT-TMF 12 BU 0829216 89
UC1-TMF 8 0821548 121 UCT-EM (20X9) 0801471 257 UCT-TM 4 OG 0829150 83 UCT-TMF 12 BU CUS 0829691 89

UC1-TMF 8 BU 0828217 121 UCT-EM (20X9) CUS 0801556 257 UCT-TM 4 OG CUS 0829590 83 UCT-TMF 12 CUS 0829686 89
UC1-TMF 8 BU CUS 0828351 121 UCT-EM (20X9) TQ 0801473 257 UCT-TM 4 RD 0829149 83 UCT-TMF 12 GN 0829217 89
UC1-TMF 8 CUS 0824519 121 UCT-EM (20X9) TQ CUS 0801558 257 UCT-TM 4 RD CUS 0829589 83 UCT-TMF 12 GN CUS 0829692 89
UC1-TMF 8 GN 0828218 121 UCT-EM (20X9) YE 0801472 257 UCT-TM 4 VT 0829151 83 UCT-TMF 12 OG 0829213 89

UC1-TMF 8 GN CUS 0828352 121 UCT-EM (20X9) YE CUS 0801557 257 UCT-TM 4 VT CUS 0829592 83 UCT-TMF 12 OG CUS 0829688 89
UC1-TMF 8 OG 0828215 121 UCT-EM (21X8) 0801489 257 UCT-TM 4 YE 0828733 83 UCT-TMF 12 RD 0829212 89
UC1-TMF 8 OG CUS 0828349 121 UCT-EM (21X8) CUS 0801574 257 UCT-TM 4 YE CUS 0829591 83 UCT-TMF 12 RD CUS 0829687 89
UC1-TMF 8 RD 0828214 121 UCT-EM (30X5) 0801505 108 UCT-TM 5 0828734 83 UCT-TMF 12 VT 0829215 89

UC1-TMF 8 RD CUS 0828348 121 UCT-EM (30X5) CUS 0801589 108 UCT-TM 5 BU 0829157 83 UCT-TMF 12 VT CUS 0829690 89
UC1-TMF 8 YE 0828216 121 UCT-EM (30X5) YE 0830340 108 UCT-TM 5 BU CUS 0829600 83 UCT-TMF 12 YE 0829211 89
UC1-TMF 8 YE CUS 0828350 121 UCT-EM (30X5) YE CUS 0830348 108 UCT-TM 5 CUS 0829595 83 UCT-TMF 12 YE CUS 0829689 89
UC1U-TM 5 0821302 119 UCT-EM (5X10) 0801497 247 UCT-TM 5 GN 0829158 83 UCT-TMF 16 0829218 89

UC1U-TM 5 CUS 0824521 119 UCT-EM (5X10) CUS 0801583 247 UCT-TM 5 GN CUS 0829601 83 UCT-TMF 16 BU 0829223 89
UC2-TM 4 0821713 122 UCT-EM (6X10) 0801493 248 UCT-TM 5 OG 0829155 83 UCT-TMF 16 BU CUS 0829698 89
UC2-TM 4 CUS 0824533 122 UCT-EM (6X10) CUS 0801579 248 UCT-TM 5 OG CUS 0829597 83 UCT-TMF 16 CUS 0829693 89
UC2-TM 5 0821690 123 UCT-EM (7X10) 0830765 246 UCT-TM 5 RD 0829154 83 UCT-TMF 16 GN 0829224 89

UC2-TM 5 CUS 0824535 123 UCT-EM (7X10) CUS 0830766 246 UCT-TM 5 RD CUS 0829596 83 UCT-TMF 16 GN CUS 0829699 89
UC2-TM 6 0821674 123 UCT-TM 10 0829142 85 UCT-TM 5 VT 0829156 83 UCT-TMF 16 OG 0829220 89
UC2-TM 6 CUS 0824537 123 UCT-TM 10 BU 0829172 85 UCT-TM 5 VT CUS 0829599 83 UCT-TMF 16 OG CUS 0829695 89
UC2-TM 8 0821755 123 UCT-TM 10 BU CUS 0829628 85 UCT-TM 5 YE 0828735 83 UCT-TMF 16 RD 0829219 89

UC2-TM 8 CUS 0824539 123 UCT-TM 10 CUS 0829623 85 UCT-TM 5 YE CUS 0829598 83 UCT-TMF 16 RD CUS 0829694 89
UC2F-TM 4 0822178 124 UCT-TM 10 GN 0829173 85 UCT-TM 6 0828736 83 UCT-TMF 16 VT CUS 0829697 89
UC2F-TM 4 CUS 0824525 124 UCT-TM 10 GN CUS 0829629 85 UCT-TM 6 BU 0829162 83 UCT-TMF 16 YE 0829221 89
UC2F-TM 5 0822181 125 UCT-TM 10 OG 0829170 85 UCT-TM 6 BU CUS 0829607 83 UCT-TMF 16 YE CUS 0829696 89

UC2F-TM 5 CUS 0824527 125 UCT-TM 10 OG CUS 0829625 85 UCT-TM 6 CUS 0829602 83 UCT-TMF 3,5 0829486 86
UC2F-TM 6 0822194 125 UCT-TM 10 RD 0829169 85 UCT-TM 6 GN 0829163 83 UCT-TMF 3,5 BU 0829518 86
UC2F-TM 6 CUS 0824529 125 UCT-TM 10 RD CUS 0829624 85 UCT-TM 6 GN CUS 0829608 83 UCT-TMF 3,5 BU CUS 0829649 86
UC2F-TM 8 0822204 125 UCT-TM 10 VT 0829171 85 UCT-TM 6 OG 0829160 83 UCT-TMF 3,5 CUS 0829644 86

UC2F-TM 8 CUS 0824531 125 UCT-TM 10 VT CUS 0829627 85 UCT-TM 6 OG CUS 0829604 83 UCT-TMF 3,5 GN 0829519 86
UC3-TM 5 0822369 126 UCT-TM 10 YE 0829143 85 UCT-TM 6 RD 0829159 83 UCT-TMF 3,5 GN CUS 0829650 86
UC3-TM 5 CUS 0826888 126 UCT-TM 10 YE CUS 0829626 85 UCT-TM 6 RD CUS 0829603 83 UCT-TMF 3,5 OG 0829516 86
UC3-TM 6 0822385 127 UCT-TM 12 0829144 85 UCT-TM 6 VT 0829161 83 UCT-TMF 3,5 OG CUS 0829646 86

UC3-TM 6 CUS 0826889 127 UCT-TM 12 BU 0829177 85 UCT-TM 6 VT CUS 0829606 83 UCT-TMF 3,5 RD 0829515 86
UC3-TM 8 0822408 127 UCT-TM 12 BU CUS 0829635 85 UCT-TM 6 YE 0828737 83 UCT-TMF 3,5 RD CUS 0829645 86
UC3-TM 8 CUS 0826890 127 UCT-TM 12 CUS 0829630 85 UCT-TM 6 YE CUS 0829605 83 UCT-TMF 3,5 VT 0829517 86
UCT-EM (10X5) 0801470 249 UCT-TM 12 GN 0829178 85 UCT-TM 7,62 0828738 84 UCT-TMF 3,5 VT CUS 0829648 86

UCT-EM (10X5) CUS 0801554 249 UCT-TM 12 GN CUS 0829636 85 UCT-TM 7,62 BU 0829513 84 UCT-TMF 3,5 YE 0829487 86
UCT-EM (10X7) 0801498 249 UCT-TM 12 OG 0829175 85 UCT-TM 7,62 BU CUS 0829614 84 UCT-TMF 3,5 YE CUS 0829647 86
UCT-EM (10X7) CUS 0801585 249 UCT-TM 12 OG CUS 0829632 85 UCT-TM 7,62 CUS 0829609 84 UCT-TMF 4 0828742 87
UCT-EM (10X7) TQ 0801499 249 UCT-TM 12 RD 0829174 85 UCT-TM 7,62 GN 0829514 84 UCT-TMF 4 BU 0829187 87

PHOENIX CONTACT 609

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Index
Alphabetical

Type Order No. Page Type Order No. Page Type Order No. Page Type Order No. Page

UCT-TMF 4 BU CUS 0829656 87 UCT-WMT (12X4) GN 0801442 183 UCT1-TM 6 BU CUS 0829710 128 US-EMLF (104X140) BU 1014293 269
UCT-TMF 4 CUS 0829651 87 UCT-WMT (12X4) GN CUS 0801527 183 UCT1-TM 6 CUS 0829706 128 US-EMLF (104X140) BU CUS 1014299 269
UCT-TMF 4 GN 0829188 87 UCT-WMT (12X4) OG 0801441 183 UCT1-TM 6 GN 0829236 128 US-EMLF (104X140) CUS 1014297 269
UCT-TMF 4 GN CUS 0829657 87 UCT-WMT (12X4) OG CUS 0801525 183 UCT1-TM 6 GN CUS 0829711 128 US-EMLF (104X140) YE 1014292 269

UCT-TMF 4 OG 0829185 87 UCT-WMT (12X4) RD 0801440 183 UCT1-TM 6 OG 0829233 128 US-EMLF (104X140) YE CUS 1014298 269
UCT-TMF 4 OG CUS 0829653 87 UCT-WMT (12X4) RD CUS 0801524 183 UCT1-TM 6 OG CUS 0829708 128 US-EMLF (104X70) 1014294 269
UCT-TMF 4 RD 0829184 87 UCT-WMT (12X4) VT 0801443 183 UCT1-TM 6 RD 0829232 128 US-EMLF (104X70) BU 1014296 269
UCT-TMF 4 RD CUS 0829652 87 UCT-WMT (12X4) VT CUS 0801528 183 UCT1-TM 6 RD CUS 0829707 128 US-EMLF (104X70) BU CUS 1014302 269

UCT-TMF 4 VT 0829186 87 UCT-WMT (12X4) YE 0801439 183 UCT1-TM 6 YE 0829234 128 US-EMLF (104X70) CUS 1014300 269
UCT-TMF 4 VT CUS 0829655 87 UCT-WMT (12X4) YE CUS 0801523 183 UCT1-TM 6 YE CUS 0829709 128 US-EMLF (104X70) YE 1014295 269
UCT-TMF 4 YE 0828743 87 UCT-WMT (15X4) 0801446 183 UCT1-TMF 5 0829237 129 US-EMLF (104X70) YE CUS 1014301 269
UCT-TMF 4 YE CUS 0829654 87 UCT-WMT (15X4) BU 0801452 183 UCT1-TMF 5 BU 0829241 129 US-EMLP (100X60) 0828807 259

UCT-TMF 5 0828744 87 UCT-WMT (15X4) BU CUS 0801537 183 UCT1-TMF 5 BU CUS 0829722 129 US-EMLP (100X60) CUS 0830121 261
UCT-TMF 5 BU 0829192 87 UCT-WMT (15X4) CUS 0801530 183 UCT1-TMF 5 CUS 0829718 129 US-EMLP (100X60) SR 0828910 259
UCT-TMF 5 BU CUS 0829663 87 UCT-WMT (15X4) GN 0801450 183 UCT1-TMF 5 GN 0829242 129 US-EMLP (100X60) SR CUS 0830123 261
UCT-TMF 5 CUS 0829658 87 UCT-WMT (15X4) GN CUS 0801535 183 UCT1-TMF 5 GN CUS 0829723 129 US-EMLP (100X60) YE 0828909 259

UCT-TMF 5 GN 0829193 87 UCT-WMT (15X4) OG 0801449 183 UCT1-TMF 5 OG 0829239 129 US-EMLP (100X60) YE CUS 0830122 261
UCT-TMF 5 GN CUS 0829664 87 UCT-WMT (15X4) OG CUS 0801534 183 UCT1-TMF 5 OG CUS 0829720 129 US-EMLP (104X135) 0830304 259
UCT-TMF 5 OG 0829190 87 UCT-WMT (15X4) RD 0801448 183 UCT1-TMF 5 RD 0829238 129 US-EMLP (104X135) CUS 0830387 261
UCT-TMF 5 OG CUS 0829660 87 UCT-WMT (15X4) RD CUS 0801533 183 UCT1-TMF 5 RD CUS 0829719 129 US-EMLP (104X135) SR 0830306 259

UCT-TMF 5 RD 0829189 87 UCT-WMT (15X4) VT 0801451 183 UCT1-TMF 5 YE 0829240 129 US-EMLP (104X135) SR CUS 0830389 261
UCT-TMF 5 RD CUS 0829659 87 UCT-WMT (15X4) VT CUS 0801536 183 UCT1-TMF 5 YE CUS 0829721 129 US-EMLP (104X135) YE 0830305 259
UCT-TMF 5 VT 0829191 87 UCT-WMT (15X4) YE 0801447 183 UCT1-TMF 6 0829243 129 US-EMLP (104X135) YE CUS 0830388 261
UCT-TMF 5 VT CUS 0829662 87 UCT-WMT (15X4) YE CUS 0801531 183 UCT1-TMF 6 BU 0829247 129 US-EMLP (11X9) 0828789 258

UCT-TMF 5 YE 0828745 87 UCT-WMT (18X4) 0801462 183 UCT1-TMF 6 BU CUS 0829728 129 US-EMLP (11X9) CUS 0830073 260
UCT-TMF 5 YE CUS 0829661 87 UCT-WMT (18X4) BU 0801468 183 UCT1-TMF 6 CUS 0829724 129 US-EMLP (11X9) SR 0828872 258
UCT-TMF 6 0828746 87 UCT-WMT (18X4) BU CUS 0801546 183 UCT1-TMF 6 GN 0829248 129 US-EMLP (11X9) SR CUS 0830075 260
UCT-TMF 6 BU 0829197 87 UCT-WMT (18X4) CUS 0801538 183 UCT1-TMF 6 GN CUS 0829729 129 US-EMLP (11X9) YE 0828871 258

UCT-TMF 6 BU CUS 0829670 87 UCT-WMT (18X4) GN 0801466 183 UCT1-TMF 6 OG 0829245 129 US-EMLP (11X9) YE CUS 0830074 260
UCT-TMF 6 CUS 0829665 87 UCT-WMT (18X4) GN CUS 0801544 183 UCT1-TMF 6 OG CUS 0829726 129 US-EMLP (15X5) 0828790 258
UCT-TMF 6 GN 0829198 87 UCT-WMT (18X4) OG 0801465 183 UCT1-TMF 6 RD 0829244 129 US-EMLP (15X5) CUS 0830076 260
UCT-TMF 6 GN CUS 0829671 87 UCT-WMT (18X4) OG CUS 0801543 183 UCT1-TMF 6 RD CUS 0829725 129 US-EMLP (15X5) SR 0828874 258

UCT-TMF 6 OG 0829195 87 UCT-WMT (18X4) RD 0801464 183 UCT1-TMF 6 YE 0829246 129 US-EMLP (15X5) SR CUS 0830078 260
UCT-TMF 6 OG CUS 0829667 87 UCT-WMT (18X4) RD CUS 0801541 183 UCT1-TMF 6 YE CUS 0829727 129 US-EMLP (15X5) YE 0828873 258
UCT-TMF 6 RD 0829194 87 UCT-WMT (18X4) VT 0801467 183 UCT2-TM 5/6 0829249 130 US-EMLP (15X5) YE CUS 0830077 260
UCT-TMF 6 RD CUS 0829666 87 UCT-WMT (18X4) VT CUS 0801545 183 UCT2-TM 5/6 CUS 0829250 130 US-EMLP (17X15) 0828793 258

UCT-TMF 6 VT 0829196 87 UCT-WMT (18X4) YE 0801463 183 UCT3-TM 5 0829251 131 US-EMLP (17X15) CUS 0830082 260
UCT-TMF 6 VT CUS 0829669 87 UCT-WMT (18X4) YE CUS 0801540 183 UCT3-TM 5 CUS 0829955 131 US-EMLP (17X15) SR 0828880 258
UCT-TMF 6 YE 0828747 87 UCT-WMT (23X4) 0801453 184 UCT3-TM 6 0829252 131 US-EMLP (17X15) SR CUS 0830084 260
UCT-TMF 6 YE CUS 0829668 87 UCT-WMT (23X4) BU 0801460 184 UCT3-TM 6 CUS 0829956 131 US-EMLP (17X15) YE 0828879 258

UCT-TMF 8 0828748 88 UCT-WMT (23X4) BU CUS 0801553 184 UCT5-TM 5 0828750 132 US-EMLP (17X15) YE CUS 0830083 260
UCT-TMF 8 BU 0829202 88 UCT-WMT (23X4) CUS 0801547 184 UCT5-TM 5 CUS 0829742 132 US-EMLP (17X7) 0828792 258
UCT-TMF 8 BU CUS 0829677 88 UCT-WMT (23X4) GN 0801457 184 UCT5-TM 6 0828752 133 US-EMLP (17X7) CUS 0830079 260
UCT-TMF 8 CUS 0829672 88 UCT-WMT (23X4) GN CUS 0801551 184 UCT5-TM 6 CUS 0829743 133 US-EMLP (17X7) SR 0828878 258

UCT-TMF 8 GN 0829203 88 UCT-WMT (23X4) OG 0801456 184 UCT6M-TM 5 0830756 134 US-EMLP (17X7) SR CUS 0830081 260
UCT-TMF 8 GN CUS 0829678 88 UCT-WMT (23X4) OG CUS 0801550 184 UCT6M-TM 5 CUS 0830762 134 US-EMLP (17X7) YE 0828877 258
UCT-TMF 8 OG 0829200 88 UCT-WMT (23X4) RD 0801455 184 UCT6M-TM 6 0830757 135 US-EMLP (17X7) YE CUS 0830080 260
UCT-TMF 8 OG CUS 0829674 88 UCT-WMT (23X4) RD CUS 0801549 184 UCT6M-TM 6 CUS 0830763 135 US-EMLP (20X9) 0828795 258

UCT-TMF 8 RD 0829199 88 UCT-WMT (23X4) VT 0801459 184 UCT6M-TM 8 0830758 135 US-EMLP (20X9) CUS 0830085 260
UCT-TMF 8 RD CUS 0829673 88 UCT-WMT (23X4) VT CUS 0801552 184 UCT6M-TM 8 CUS 0830764 135 US-EMLP (20X9) SR 0828884 258
UCT-TMF 8 VT 0829201 88 UCT-WMT (23X4) YE 0801454 184 UCT6R-TM 5 0830753 136 US-EMLP (20X9) SR CUS 0830087 260
UCT-TMF 8 VT CUS 0829676 88 UCT-WMT (23X4) YE CUS 0801548 184 UCT6R-TM 5 CUS 0830759 136 US-EMLP (20X9) YE 0828883 258

UCT-TMF 8 YE 0828749 88 UCT-WMT (30X4) 0801422 185 UCT6R-TM 6 0830754 137 US-EMLP (20X9) YE CUS 0830086 260
UCT-TMF 8 YE CUS 0829675 88 UCT-WMT (30X4) BU 0801428 185 UCT6R-TM 6 CUS 0830760 137 US-EMLP (22X22) 0828796 258
UCT-WMS 3,2 (12X4) 0828570 186 UCT-WMT (30X4) BU CUS 0801514 185 UCT6R-TM 8 0830755 137 US-EMLP (22X22) CUS 0830088 260
UCT-WMS 3,2 (12X4) CUS 0829951 186 UCT-WMT (30X4) CUS 0801507 185 UCT6R-TM 8 CUS 0830761 137 US-EMLP (22X22) SR 0828886 258

UCT-WMS 3,2 (12X4) YE 0828572 186 UCT-WMT (30X4) GN 0801426 185 UNIFOX-C VDE 1212202 368 US-EMLP (22X22) SR CUS 0830090 260
UCT-WMS 3,2 (12X4) YE CUS 0829952 186 UCT-WMT (30X4) GN CUS 0801511 185 UNIFOX-CE VDE 1212203 368 US-EMLP (22X22) YE 0828885 258
UCT-WMS 4,7 (12X5,5) 0828571 186 UCT-WMT (30X4) OG 0801425 185 UNIFOX-CT 4,8 1212475 369 US-EMLP (22X22) YE CUS 0830089 260
UCT-WMS 4,7 (12X5,5) CUS 0829953 186 UCT-WMT (30X4) OG CUS 0801510 185 UNIFOX-CT 4,8P 1212609 369 US-EMLP (27X12,5) 0828798 258

UCT-WMS 4,7 (12X5,5) YE 0828573 186 UCT-WMT (30X4) RD 0801424 185 UNIFOX-CT M 7,9 1212610 369 US-EMLP (27X12,5) CUS 0830094 260
UCT-WMS 4,7 (12X5,5) YE CUS 0829954 186 UCT-WMT (30X4) RD CUS 0801509 185 UNIFOX-F VDE 1212363 369 US-EMLP (27X12,5) SR 0828892 258
UCT-WMT (10X4) 0801430 182 UCT-WMT (30X4) VT 0801427 185 UNIFOX-P VDE 1212204 368 US-EMLP (27X12,5) SR CUS 0830096 260
UCT-WMT (10X4) BU 0801437 182 UCT-WMT (30X4) VT CUS 0801512 185 UNIFOX-PC VDE 1212205 368 US-EMLP (27X12,5) YE 0828891 258

UCT-WMT (10X4) BU CUS 0801521 182 UCT-WMT (30X4) YE 0801423 185 UNIFOX-PE VDE 1212529 368 US-EMLP (27X12,5) YE CUS 0830095 260
UCT-WMT (10X4) CUS 0801515 182 UCT-WMT (30X4) YE CUS 0801508 185 UNIFOX-R VDE 1212364 369 US-EMLP (27X15) 0828799 258
UCT-WMT (10X4) GN 0801435 182 UCT1-TM 5 0829482 128 UNIFOX-RVT M 1212476 370 US-EMLP (27X15) CUS 0830097 260
UCT-WMT (10X4) GN CUS 0801519 182 UCT1-TM 5 BU 0829229 128 UNIFOX-RVT M/BIT 2,4L 1212477 370 US-EMLP (27X15) SR 0828894 258

UCT-WMT (10X4) OG 0801434 182 UCT1-TM 5 BU CUS 0829704 128 UNIFOX-RVT P 4 1212478 543 US-EMLP (27X15) SR CUS 0830099 260
UCT-WMT (10X4) OG CUS 0801518 182 UCT1-TM 5 CUS 0829700 128 UNIFOX-RVT P 6 1212509 543 US-EMLP (27X15) YE 0828893 258
UCT-WMT (10X4) RD 0801433 182 UCT1-TM 5 GN 0829230 128 UNIFOX-WP 1212365 369 US-EMLP (27X15) YE CUS 0830098 260
UCT-WMT (10X4) RD CUS 0801517 182 UCT1-TM 5 GN CUS 0829705 128 US-EML (104X140) 0800465 268 US-EMLP (27X18) 0828800 259

UCT-WMT (10X4) VT 0801436 182 UCT1-TM 5 OG 0829227 128 US-EML (104X140) SR 0800466 268 US-EMLP (27X18) CUS 0830100 260
UCT-WMT (10X4) VT CUS 0801520 182 UCT1-TM 5 OG CUS 0829702 128 US-EML (104X140) YE 0800467 268 US-EMLP (27X18) SR 0828896 259
UCT-WMT (10X4) YE 0801431 182 UCT1-TM 5 RD 0829226 128 US-EML (104X3,8) 0800464 268 US-EMLP (27X18) SR CUS 0830102 260
UCT-WMT (10X4) YE CUS 0801516 182 UCT1-TM 5 RD CUS 0829701 128 US-EML (17,5X8) 0800461 268 US-EMLP (27X18) YE 0828895 259

UCT-WMT (12X4) 0801438 183 UCT1-TM 5 YE 0829228 128 US-EML (17,5X8) YE 0800463 268 US-EMLP (27X18) YE CUS 0830101 260
UCT-WMT (12X4) BU 0801444 183 UCT1-TM 5 YE CUS 0829703 128 US-EML (20X8) 0800458 268 US-EMLP (27X27) 0828801 259
UCT-WMT (12X4) BU CUS 0801529 183 UCT1-TM 6 0829483 128 US-EML (20X8) YE 0800460 268 US-EMLP (27X27) CUS 0830103 260
UCT-WMT (12X4) CUS 0801522 183 UCT1-TM 6 BU 0829235 128 US-EMLF (104X140) 1014291 269 US-EMLP (27X27) SR 0828898 259

610 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Index
Alphabetical

Type Order No. Page Type Order No. Page Type Order No. Page Type Order No. Page

US-EMLP (27X27) SR CUS 0830105 260 US-EMLSP (28X10) SR CUS 0830370 267 US-EMP (52,5X15) YE CUS 0830358 265 US-TM 100 CUS 0829948 90
US-EMLP (27X27) YE 0828897 259 US-EMLSP (28X10) YE 0830344 267 US-EMP (60X15) 0828781 262 US-TMF 100 0829260 91
US-EMLP (27X27) YE CUS 0830104 260 US-EMLSP (28X10) YE CUS 0830369 267 US-EMP (60X15) CUS 0830052 263 US-TMF 100 CUS 0829949 91
US-EMLP (27X8) 0828797 258 US-EMP (100X15) 0829521 262 US-EMP (60X15) SR 0828857 262 US-TML (104X10) 0830770 93

US-EMLP (27X8) CUS 0830091 260 US-EMP (100X15) CUS 0830061 263 US-EMP (60X15) SR CUS 0830054 263 US-TML (104X2,8) 0830767 92
US-EMLP (27X8) SR 0828890 258 US-EMP (100X15) SR 0829523 262 US-EMP (60X15) YE 0828856 262 US-TML (104X3,8) 0830768 93
US-EMLP (27X8) SR CUS 0830093 260 US-EMP (100X15) SR CUS 0830063 263 US-EMP (60X15) YE CUS 0830053 263 US-TML (104X5) 0830769 93
US-EMLP (27X8) YE 0828889 258 US-EMP (100X15) YE 0829522 262 US-EMP (60X30) 0828782 262 US-WML 14 (25X19) 0800473 192

US-EMLP (27X8) YE CUS 0830092 260 US-EMP (100X15) YE CUS 0830062 263 US-EMP (60X30) CUS 0830055 263 US-WML 36 (25X25) 0800474 192
US-EMLP (35X15) 0830300 259 US-EMP (17X15) 0828774 262 US-EMP (60X30) SR 0828859 262 US-WML 6 (13X13) 0800472 192
US-EMLP (35X15) CUS 0830375 261 US-EMP (17X15) CUS 0830025 263 US-EMP (60X30) SR CUS 0830057 263 US-WMT (10X4) 0828765 187
US-EMLP (35X15) RD 0830321 259 US-EMP (17X15) SR 0828843 262 US-EMP (60X30) YE 0828858 262 US-WMT (10X4) BU 0829277 187

US-EMLP (35X15) RD CUS 0830378 261 US-EMP (17X15) SR CUS 0830027 263 US-EMP (60X30) YE CUS 0830056 263 US-WMT (10X4) BU CUS 0829962 187
US-EMLP (35X15) SR 0830320 259 US-EMP (17X15) YE 0828842 262 US-EMP (70X15) 0830297 264 US-WMT (10X4) CUS 0829957 187
US-EMLP (35X15) SR CUS 0830377 261 US-EMP (17X15) YE CUS 0830026 263 US-EMP (70X15) CUS 0830361 265 US-WMT (10X4) GN 0829278 187
US-EMLP (35X15) YE 0830319 259 US-EMP (20X9) 0829439 262 US-EMP (70X15) RD 0830315 264 US-WMT (10X4) GN CUS 0829963 187

US-EMLP (35X15) YE CUS 0830376 261 US-EMP (20X9) CUS 0830028 263 US-EMP (70X15) RD CUS 0830364 265 US-WMT (10X4) OG 0829274 187
US-EMLP (35X9) 0828802 259 US-EMP (25X6) 0829435 262 US-EMP (70X15) SR 0830314 264 US-WMT (10X4) OG CUS 0829959 187
US-EMLP (35X9) CUS 0830106 261 US-EMP (25X6) CUS 0830029 263 US-EMP (70X15) SR CUS 0830363 265 US-WMT (10X4) RD 0829273 187
US-EMLP (35X9) SR 0829430 259 US-EMP (25X6)-1 0802754 262 US-EMP (70X15) YE 0830313 264 US-WMT (10X4) RD CUS 0829958 187

US-EMLP (35X9) SR CUS 0830108 261 US-EMP (25X6)-1 CUS 0802755 263 US-EMP (70X15) YE CUS 0830362 265 US-WMT (10X4) VT 0829276 187
US-EMLP (35X9) YE 0828899 259 US-EMP (27X12,5) 0828776 262 US-EMP (8,8X15) 0830293 264 US-WMT (10X4) VT CUS 0829961 187
US-EMLP (35X9) YE CUS 0830107 261 US-EMP (27X12,5) CUS 0830033 263 US-EMP (8,8X15) CUS 0830349 265 US-WMT (10X4) YE 0828952 187
US-EMLP (40X10) 0830341 259 US-EMP (27X12,5) SR 0828847 262 US-EMP (8,8X15) RD 0830428 264 US-WMT (10X4) YE CUS 0829960 187

US-EMLP (40X10) CUS 0830365 261 US-EMP (27X12,5) SR CUS 0830035 263 US-EMP (8,8X15) RD CUS 0830352 265 US-WMT (12X4) 0828766 188
US-EMLP (40X10) SR 0830328 259 US-EMP (27X12,5) YE 0828846 262 US-EMP (8,8X15) SR 0830427 264 US-WMT (12X4) BU 0829284 188
US-EMLP (40X10) SR CUS 0830367 261 US-EMP (27X12,5) YE CUS 0830034 263 US-EMP (8,8X15) SR CUS 0830351 265 US-WMT (12X4) BU CUS 0829969 188
US-EMLP (40X10) YE 0830342 259 US-EMP (27X15) 0828777 262 US-EMP (8,8X15) YE 0830426 264 US-WMT (12X4) CUS 0829964 188

US-EMLP (40X10) YE CUS 0830366 261 US-EMP (27X15) CUS 0830036 263 US-EMP (8,8X15) YE CUS 0830350 265 US-WMT (12X4) GN 0829285 188
US-EMLP (49X15) 0828803 259 US-EMP (27X15) SR 0828849 262 US-EMP (85,6X54) 0828783 262 US-WMT (12X4) GN CUS 0829970 188
US-EMLP (49X15) CUS 0830109 261 US-EMP (27X15) SR CUS 0830038 263 US-EMP (85,6X54) CUS 0830058 263 US-WMT (12X4) OG 0829281 188
US-EMLP (49X15) SR 0828902 259 US-EMP (27X15) YE 0828848 262 US-EMP (85,6X54) SR 0828861 262 US-WMT (12X4) OG CUS 0829966 188

US-EMLP (49X15) SR CUS 0830111 261 US-EMP (27X15) YE CUS 0830037 263 US-EMP (85,6X54) SR CUS 0830060 263 US-WMT (12X4) RD 0829280 188
US-EMLP (49X15) YE 0828901 259 US-EMP (27X18) 0828778 262 US-EMP (85,6X54) YE 0828860 262 US-WMT (12X4) RD CUS 0829965 188
US-EMLP (49X15) YE CUS 0830110 261 US-EMP (27X18) CUS 0830039 263 US-EMP (85,6X54) YE CUS 0830059 263 US-WMT (12X4) VT 0829283 188
US-EMLP (52,5X15) 0830301 259 US-EMP (27X18) SR 0828851 262 US-EMSP (50X30) 0828786 266 US-WMT (12X4) VT CUS 0829968 188

US-EMLP (52,5X15) CUS 0830379 261 US-EMP (27X18) SR CUS 0830041 263 US-EMSP (50X30) CUS 0830064 266 US-WMT (12X4) YE 0828953 188
US-EMLP (52,5X15) RD 0830324 259 US-EMP (27X18) YE 0828850 262 US-EMSP (50X30) SR 0828928 266 US-WMT (12X4) YE CUS 0829967 188
US-EMLP (52,5X15) RD CUS 0830382 261 US-EMP (27X18) YE CUS 0830040 263 US-EMSP (50X30) SR CUS 0830066 266 US-WMT (15X4) 0828767 188
US-EMLP (52,5X15) SR 0830323 259 US-EMP (27X27) 0828779 262 US-EMSP (50X30) YE 0828927 266 US-WMT (15X4) BU 0829291 188

US-EMLP (52,5X15) SR CUS 0830381 261 US-EMP (27X27) CUS 0830042 263 US-EMSP (50X30) YE CUS 0830065 266 US-WMT (15X4) BU CUS 0829976 188
US-EMLP (52,5X15) YE 0830322 259 US-EMP (27X27) SR 0828853 262 US-EMSP (75,6X54) 0828787 266 US-WMT (15X4) CUS 0829971 188
US-EMLP (52,5X15) YE CUS 0830380 261 US-EMP (27X27) SR CUS 0830044 263 US-EMSP (75,6X54) CUS 0830067 266 US-WMT (15X4) GN 0829292 188
US-EMLP (60X15) 0828804 259 US-EMP (27X27) YE 0828852 262 US-EMSP (75,6X54) SR 0828930 266 US-WMT (15X4) GN CUS 0829977 188

US-EMLP (60X15) CUS 0830112 261 US-EMP (27X27) YE CUS 0830043 263 US-EMSP (75,6X54) SR CUS 0830069 266 US-WMT (15X4) OG 0829288 188
US-EMLP (60X15) SR 0828904 259 US-EMP (27X8) 0828775 262 US-EMSP (75,6X54) YE 0828929 266 US-WMT (15X4) OG CUS 0829973 188
US-EMLP (60X15) SR CUS 0830114 261 US-EMP (27X8) CUS 0830030 263 US-EMSP (75,6X54) YE CUS 0830068 266 US-WMT (15X4) RD 0829287 188
US-EMLP (60X15) YE 0828903 259 US-EMP (27X8) SR 0828845 262 US-EMSP (90X60) 0828788 266 US-WMT (15X4) RD CUS 0829972 188

US-EMLP (60X15) YE CUS 0830113 261 US-EMP (27X8) SR CUS 0830032 263 US-EMSP (90X60) CUS 0830070 266 US-WMT (15X4) VT 0829290 188
US-EMLP (60X30) 0828805 259 US-EMP (27X8) YE 0828844 262 US-EMSP (90X60) SR 0828932 266 US-WMT (15X4) VT CUS 0829975 188
US-EMLP (60X30) CUS 0830115 261 US-EMP (27X8) YE CUS 0830031 263 US-EMSP (90X60) SR CUS 0830072 266 US-WMT (15X4) YE 0828954 188
US-EMLP (60X30) SR 0828906 259 US-EMP (29X8) 0829436 262 US-EMSP (90X60) YE 0828931 266 US-WMT (15X4) YE CUS 0829974 188

US-EMLP (60X30) SR CUS 0830117 261 US-EMP (29X8) CUS 0830045 263 US-EMSP (90X60) YE CUS 0830071 266 US-WMT (18X4) 0828768 189
US-EMLP (60X30) YE 0828905 259 US-EMP (29X8) YE 0829440 262 US-PML-GHS100 (13X13) 1014287 348 US-WMT (18X4) BU 0829298 189
US-EMLP (60X30) YE CUS 0830116 261 US-EMP (29X8) YE CUS 0830046 263 US-PML-GHS100 (25X25) 1014288 348 US-WMT (18X4) BU CUS 0829983 189
US-EMLP (70X15) 0830302 259 US-EMP (35X15) 0830295 264 US-PML-M100 (D100) 1014177 334 US-WMT (18X4) CUS 0829978 189

US-EMLP (70X15) CUS 0830383 261 US-EMP (35X15) CUS 0830353 265 US-PML-M100 (D100) CUS 1014179 334 US-WMT (18X4) GN 0829299 189
US-EMLP (70X15) RD 0830327 259 US-EMP (35X15) RD 0830309 264 US-PML-M100 (D50) 1014176 334 US-WMT (18X4) GN CUS 0829984 189
US-EMLP (70X15) RD CUS 0830386 261 US-EMP (35X15) RD CUS 0830356 265 US-PML-M100 (D50) CUS 1014178 334 US-WMT (18X4) OG 0829295 189
US-EMLP (70X15) SR 0830326 259 US-EMP (35X15) SR 0830308 264 US-PML-P100 (D100) 1014218 326 US-WMT (18X4) OG CUS 0829980 189

US-EMLP (70X15) SR CUS 0830385 261 US-EMP (35X15) SR CUS 0830355 265 US-PML-P100 (D100) CUS 1014220 326 US-WMT (18X4) RD 0829294 189
US-EMLP (70X15) YE 0830325 259 US-EMP (35X15) YE 0830307 264 US-PML-P100 (D50) 1014217 326 US-WMT (18X4) RD CUS 0829979 189
US-EMLP (70X15) YE CUS 0830384 261 US-EMP (35X15) YE CUS 0830354 265 US-PML-P100 (D50) CUS 1014219 326 US-WMT (18X4) VT 0829297 189
US-EMLP (8,8X15) 0830303 258 US-EMP (40X17) 0829437 262 US-PML-P200 (D100) 1014222 326 US-WMT (18X4) VT CUS 0829982 189

US-EMLP (8,8X15) CUS 0830371 260 US-EMP (40X17) CUS 0830047 263 US-PML-P200 (D100) CUS 1014224 326 US-WMT (18X4) YE 0828955 189
US-EMLP (8,8X15) RD 0830318 258 US-EMP (44X7) 0829438 262 US-PML-P200 (D50) 1014221 326 US-WMT (18X4) YE CUS 0829981 189
US-EMLP (8,8X15) RD CUS 0830374 260 US-EMP (44X7) CUS 0830048 263 US-PML-P200 (D50) CUS 1014223 326 US-WMT (23X4) 0828769 189
US-EMLP (8,8X15) SR 0830317 258 US-EMP (49X15) 0828780 262 US-PML-W100 (100X100) 1014127 320 US-WMT (23X4) BU 0829305 189

US-EMLP (8,8X15) SR CUS 0830373 260 US-EMP (49X15) CUS 0830049 263 US-PML-W100 (100X100) CUS 1014130 320 US-WMT (23X4) BU CUS 0829990 189
US-EMLP (8,8X15) YE 0830316 258 US-EMP (49X15) SR 0828855 262 US-PML-W100 (25X25) 1014125 320 US-WMT (23X4) CUS 0829985 189
US-EMLP (8,8X15) YE CUS 0830372 260 US-EMP (49X15) SR CUS 0830051 263 US-PML-W100 (25X25) CUS 1014128 320 US-WMT (23X4) GN 0829306 189
US-EMLP (85,6X54) 0828806 259 US-EMP (49X15) YE 0828854 262 US-PML-W100 (50X50) 1014126 320 US-WMT (23X4) GN CUS 0829991 189

US-EMLP (85,6X54) CUS 0830118 261 US-EMP (49X15) YE CUS 0830050 263 US-PML-W100 (50X50) CUS 1014129 320 US-WMT (23X4) OG 0829302 189
US-EMLP (85,6X54) SR 0828908 259 US-EMP (52,5X15) 0830296 264 US-PML-W200 (100X100) 1014133 320 US-WMT (23X4) OG CUS 0829987 189
US-EMLP (85,6X54) SR CUS 0830120 261 US-EMP (52,5X15) CUS 0830357 265 US-PML-W200 (100X100) CUS 1014136 320 US-WMT (23X4) RD 0829301 189
US-EMLP (85,6X54) YE 0828907 259 US-EMP (52,5X15) RD 0830312 264 US-PML-W200 (25X25) 1014131 320 US-WMT (23X4) RD CUS 0829986 189

US-EMLP (85,6X54) YE CUS 0830119 261 US-EMP (52,5X15) RD CUS 0830360 265 US-PML-W200 (25X25) CUS 1014134 320 US-WMT (23X4) VT 0829304 189
US-EMLSP (28X10) 0830343 267 US-EMP (52,5X15) SR 0830311 264 US-PML-W200 (50X50) 1014132 320 US-WMT (23X4) VT CUS 0829989 189
US-EMLSP (28X10) CUS 0830368 267 US-EMP (52,5X15) SR CUS 0830359 265 US-PML-W200 (50X50) CUS 1014135 320 US-WMT (23X4) YE 0828956 189
US-EMLSP (28X10) SR 0830329 267 US-EMP (52,5X15) YE 0830310 264 US-TM 100 0829255 90 US-WMT (23X4) YE CUS 0829988 189

PHOENIX CONTACT 611

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Index
Alphabetical

Type Order No. Page Type Order No. Page Type Order No. Page Type Order No. Page

US-WMT (30X4) 0828770 189 WCC 30 3240256 547 WIREFOX-D SR 6 1212507 387 WML HF 3(13X10)R 0830812 196
US-WMT (30X4) BU 0829312 189 WCC 34 3240257 547 WIREFOX-D SR 6-1 1212511 387 WML HF 3(13X10)R CUS 0830824 197
US-WMT (30X4) BU CUS 0829997 189 WCC 38 3240258 547 WIREFOX-E 10 1212706 379 WML HF 3(13X10)R YE 0830813 196
US-WMT (30X4) CUS 0829992 189 WCC 42 3240259 547 WIREFOX-E 16 1212707 379 WML HF 3(13X10)R YE CUS 0830825 197

US-WMT (30X4) GN 0829313 189 WCC 56 3240260 547 WIREFOX-E 4 1212704 378 WML HF 36(25X38)R 0830822 196
US-WMT (30X4) GN CUS 0829998 189 WCC 64 3240261 547 WIREFOX-E 6SC 1212705 379 WML HF 36(25X38)R CUS 0830835 197
US-WMT (30X4) OG 0829309 189 WF 1000 1212149 471 WIREFOX-MP VDE 1212528 383 WML HF 36(25X38)R YE 0830823 196
US-WMT (30X4) OG CUS 0829994 189 WF 1000 120V 1212258 471 WM-CARRIER/B (48X10)LPR 0830423 213 WML HF 36(25X38)R YE CUS 0830836 197

US-WMT (30X4) RD 0829308 189 WF 1000/SB 1212279 471 WM-CARRIER/B (55X15)LPR 0830424 213 WML HF 5(25X10)R 0830814 196
US-WMT (30X4) RD CUS 0829993 189 WG-D HF 10,2 3241101 583 WM-CARRIER/B (85X15)LPR 0830425 213 WML HF 5(25X10)R CUS 0830826 197
US-WMT (30X4) VT 0829311 189 WG-D HF 10,2 BK 3241102 583 WML 3 (13X10)R CUS 0824884 195 WML HF 5(25X10)R YE 0830815 196
US-WMT (30X4) VT CUS 0829996 189 WG-D HF 12,7 3241103 583 WML 5 (25X10)R 0817523 194 WML HF 5(25X10)R YE CUS 0830827 197

US-WMT (30X4) YE 0828957 189 WG-D HF 12,7 BK 3241104 583 WML 5 (25X10)R CUS 0824885 195 WML HF 7,5(25X13)R 0830816 196
US-WMT (30X4) YE CUS 0829995 189 WG-D HF 16 3241105 583 WML 6 (13X13)R 0816252 194 WML HF 7,5(25X13)R CUS 0830828 197
US-WMTB (24X5) 0828771 190 WG-D HF 16 BK 3241106 583 WML 6 (13X13)R CUS 0824886 195 WML HF 7,5(25X13)R YE 0830817 196
US-WMTB (24X5) BU 0829324 190 WG-D HF 20,3 3241107 583 WML 7,5 (13X13)R CUS 0824887 195 WML HF 7,5(25X13)R YE CUS 0830829 197

US-WMTB (24X5) BU CUS 0830009 191 WG-D HF 20,3 BK 3241108 583 WML 7,5 (17X9)R 0828444 194 WML-FLAG 6 (20X10)R 0830711 198
US-WMTB (24X5) CUS 0830004 191 WG-D HF 7,6 3241099 583 WML 7,5 (17X9)R CUS 0828991 195 WML-FLAG 6 (20X10)R CUS 0830715 198
US-WMTB (24X5) GN 0829325 190 WG-D HF 7,6 BK 3241100 583 WML 7,5 (25X13)R CUS 0824888 195 WML-FLAG 6 (30X10)R 0830712 198
US-WMTB (24X5) GN CUS 0830010 191 WG-S HF 120 3241121 565 WML 12 (25X19)R CUS 0824889 195 WML-FLAG 6 (30X10)R CUS 0830716 198

US-WMTB (24X5) OG 0829321 190 WG-S HF 120 BK 3241122 565 WML 14 (25X19)R 0817536 194 WML-FLAGV 6 (20X10)R 0830713 199
US-WMTB (24X5) OG CUS 0830006 191 WG-S HF 15 3241109 565 WML 14 (25X19)R YE 0817549 194 WML-FLAGV 6 (20X10)R CUS 0830717 199
US-WMTB (24X5) RD 0829320 190 WG-S HF 15 BK 3241110 565 WML 14 (38X19)R 0817552 194 WML-FLAGV 6 (30X10)R 0830714 199
US-WMTB (24X5) RD CUS 0830005 191 WG-S HF 150 3241123 565 WML 14 (38X19)R CUS 0824892 195 WML-FLAGV 6 (30X10)R CUS 0830718 199

US-WMTB (24X5) VT 0829323 190 WG-S HF 150 BK 3241124 565 WML 18 (12X12)R 0817507 194 WMS 12,7 (60X20)R 0800369 200
US-WMTB (24X5) VT CUS 0830008 191 WG-S HF 20 3241111 565 WML 18 (12X12)R CUS 0824894 195 WMS 12,7 (60X20)R CUS 0800741 202
US-WMTB (24X5) YE 0828958 190 WG-S HF 20 BK 3241112 565 WML 20 (31X25)R 0828457 194 WMS 12,7 (60X20)R YE 0800403 200
US-WMTB (24X5) YE CUS 0830007 191 WG-S HF 40 3241113 565 WML 20 (31X25)R CUS 0828992 195 WMS 12,7 (60X20)R YE CUS 0800760 203

US-WMTB (29X8) 0828772 190 WG-S HF 40 BK 3241114 565 WML 22 (25X25)R CUS 0824895 195 WMS 12,7 (EX20)R 0800294 204
US-WMTB (29X8) BU 0829331 190 WG-S HF 50 3241115 565 WML 3 (13X10)R 0800073 194 WMS 12,7 (EX20)R BK 0800422 205
US-WMTB (29X8) BU CUS 0830016 191 WG-S HF 50 BK 3241116 565 WML 36 (25X38)R 0817510 194 WMS 12,7 (EX20)R BK CUS 0800730 207
US-WMTB (29X8) CUS 0830011 191 WG-S HF 70 3241117 565 WML 36 (25X38)R CUS 0824896 195 WMS 12,7 (EX20)R CUS 0800707 206

US-WMTB (29X8) GN 0829332 190 WG-S HF 70 BK 3241118 565 WML 7,5 (13X13)R 0800074 194 WMS 12,7 (EX20)R YE 0800305 205
US-WMTB (29X8) GN CUS 0830017 191 WG-S HF 80 3241119 565 WML 7,5 (25X13)R 0800075 194 WMS 12,7 (EX20)R YE CUS 0800719 207
US-WMTB (29X8) OG 0829328 190 WG-S HF 80 BK 3241120 565 WML 12 (25X19)R 0800076 194 WMS 12,7 (EX20)RL 0800325 204
US-WMTB (29X8) OG CUS 0830013 191 WIREFOX 10 1212150 381 WML 14 (25X19)A4 0830693 193 WMS 12,7 (EX20)RL BK 0800432 205

US-WMTB (29X8) RD 0829327 190 WIREFOX 10 VDE 1212366 383 WML 14 (25X19)A4 CUS 0830705 193 WMS 12,7 (EX20)RL YE 0800333 205
US-WMTB (29X8) RD CUS 0830012 191 WIREFOX 10/SB 1212152 379 WML 14 (25X19)A4 YE 0830694 193 WMS 19,1 (60X30)R 0800370 200
US-WMTB (29X8) VT 0829330 190 WIREFOX 16 1212155 381 WML 14 (25X19)A4 YE CUS 0830706 193 WMS 19,1 (60X30)R CUS 0800742 202
US-WMTB (29X8) VT CUS 0830015 191 WIREFOX 16-1 1212157 382 WML 14 (25X19)R CUS 0824890 195 WMS 19,1 (60X30)R YE 0800404 200

US-WMTB (29X8) YE 0828959 190 WIREFOX 16-1/SB 1204944 382 WML 14 (25X19)R YE CUS 0824891 195 WMS 19,1 (60X30)R YE CUS 0800761 203
US-WMTB (29X8) YE CUS 0830014 191 WIREFOX 16/SB 1212153 379 WML 14 (25X19)RL 0830678 194 WMS 19,1 (EX30)R 0800295 204
US-WMTB (44X15) 0828773 190 WIREFOX 2,5 1212368 378 WML 14 (38X19)R YE 0830675 194 WMS 19,1 (EX30)R BK 0800423 205
US-WMTB (44X15) BU 0829338 190 WIREFOX 2,5/SB 1212369 378 WML 14 (38X19)R YE CUS 0830682 195 WMS 19,1 (EX30)R BK CUS 0800731 207

US-WMTB (44X15) BU CUS 0830023 191 WIREFOX 2,5/WS 1212370 378 WML 14 (38X19)RL 0830679 194 WMS 19,1 (EX30)R CUS 0800708 206
US-WMTB (44X15) CUS 0830018 191 WIREFOX 4 1212156 380 WML 22 (25X25)R 0800078 194 WMS 19,1 (EX30)R YE 0800306 205
US-WMTB (44X15) GN 0829339 190 WIREFOX 4/SB 1212151 378 WML 22 (35X25)A4 0830695 193 WMS 19,1 (EX30)R YE CUS 0800720 207
US-WMTB (44X15) GN CUS 0830024 191 WIREFOX 6SC 1212158 381 WML 22 (35X25)A4 CUS 0830707 193 WMS 19,1 (EX30)RL 0800326 204

US-WMTB (44X15) OG 0829335 190 WIREFOX 6SC/SB 1212314 379 WML 22 (35X25)A4 YE 0830696 193 WMS 19,1 (EX30)RL BK 0800434 205
US-WMTB (44X15) OG CUS 0830020 191 WIREFOX ASI 1212154 383 WML 22 (35X25)A4 YE CUS 0830708 193 WMS 19,1 (EX30)RL YE 0800334 205
US-WMTB (44X15) RD 0829334 190 WIREFOX ASI/SB 1208076 383 WML 3 (13X10)A4 0830687 193 WMS 2,4 (15X4)R 0800379 200
US-WMTB (44X15) RD CUS 0830019 191 WIREFOX FC 1212619 383 WML 3 (13X10)A4 CUS 0830699 193 WMS 2,4 (15X4)R CUS 0800752 202

US-WMTB (44X15) VT 0829337 190 WIREFOX SAC 1212623 382 WML 3 (13X10)A4 YE 0830688 193 WMS 2,4 (15X4)R YE 0800412 200
US-WMTB (44X15) VT CUS 0830022 191 WIREFOX-CX 6,35 1212733 387 WML 3 (13X10)A4 YE CUS 0830700 193 WMS 2,4 (15X4)R YE CUS 0800770 203
US-WMTB (44X15) YE 0828960 190 WIREFOX-D 11 1212160 384 WML 36 (25X38)A4 0830697 193 WMS 2,4 (15X4)RL 0800389 201
US-WMTB (44X15) YE CUS 0830021 191 WIREFOX-D 11/SB 1212312 384 WML 36 (25X38)A4 CUS 0830709 193 WMS 2,4 (15X4)RXL 0800396 201

US2-TM 100 0829268 138 WIREFOX-D 13 1212162 385 WML 36 (25X38)A4 YE 0830698 193 WMS 2,4 (30X4)R 0800373 200
US2-TM 100 CUS 0829950 138 WIREFOX-D 16 1212173 385 WML 46 (25X38)R 0800067 194 WMS 2,4 (30X4)R CUS 0800745 202
USA 10 1201578 503 WIREFOX-D 28 1212174 385 WML 5 (25X10)A4 0830689 193 WMS 2,4 (30X4)R YE 0800407 200
USA 10/4,6 1202713 503 WIREFOX-D 40 1212161 385 WML 5 (25X10)A4 CUS 0830701 193 WMS 2,4 (30X4)R YE CUS 0800765 203

USS 4 1203149 433 WIREFOX-D 40/SB 1212313 385 WML 5 (25X10)A4 YE 0830690 193 WMS 2,4 (30X4)RL 0800386 201
WIREFOX-D CX-1 1212163 386 WML 5 (25X10)A4 YE CUS 0830702 193 WMS 2,4 (30X4)RXL 0800394 201
WIREFOX-D CX-1/SB 1212303 386 WML 5 (25X10)R YE 0830673 194 WMS 2,4 (60X4)R 0800363 200
WIREFOX-D CX-2 1212164 386 WML 5 (25X10)R YE CUS 0830680 195 WMS 2,4 (60X4)R CUS 0800736 202

WIREFOX-D CX-2/SB 1212304 386 WML 5 (25X10)RL 0830676 194 WMS 2,4 (60X4)R YE 0800398 200
WIREFOX-D CX-3 1212165 386 WML 6 (13X13)R YE 0830674 194 WMS 2,4 (60X4)R YE CUS 0800755 203
WIREFOX-D CX-3/SB 1212305 386 WML 6 (13X13)R YE CUS 0830681 195 WMS 2,4 (60X4)RL 0800383 201
V WIREFOX-D CX-4 1212166 386 WML 6 (13X13)RL 0830677 194 WMS 2,4 (60X4)RXL 0800392 201

VAH 1201468 505 WIREFOX-D CX-4/SB 1212306 386 WML 6 (25X13)A4 CUS 0830703 193 WMS 2,4 (EX4)R 0800289 204
VDE-ISS 5 1203343 431 WIREFOX-D CX-5 1212167 386 WML 6 (25X13)A4 YE CUS 0830704 193 WMS 2,4 (EX4)R BK 0800415 205
VDE-ISS 6 1201934 431 WIREFOX-D CX-5/SB 1212307 386 WML 7,5 (25X13)A4 0830691 193 WMS 2,4 (EX4)R BK CUS 0800725 207
VDE-ISS 8 1201947 431 WIREFOX-D CX-6 1212168 386 WML 7,5 (25X13)A4 YE 0830692 193 WMS 2,4 (EX4)R CUS 0800701 206

WIREFOX-D CX-6/SB 1212308 386 WML HF 14(25X19)R 0830818 196 WMS 2,4 (EX4)R YE 0800300 205
WIREFOX-D CX-7 1212169 386 WML HF 14(25X19)R CUS 0830831 197 WMS 2,4 (EX4)R YE CUS 0800713 207
WIREFOX-D CX-7/SB 1212309 386 WML HF 14(25X19)R YE 0830819 196 WMS 2,4 (EX4)RL 0800319 204
W WIREFOX-D CX-8 1212170 386 WML HF 14(25X19)R YE CUS 0830832 197 WMS 2,4 (EX4)RL BK 0800427 205

WCC 14 3240252 547 WIREFOX-D CX-8/SB 1212310 386 WML HF 22(25X25)R 0830820 196 WMS 2,4 (EX4)RL YE 0800328 205
WCC 18 3240253 547 WIREFOX-D CX-9 1212171 386 WML HF 22(25X25)R CUS 0830833 197 WMS 25,4 (60X40)R 0800371 200
WCC 22 3240254 547 WIREFOX-D CX-9/SB 1212311 386 WML HF 22(25X25)R YE 0830821 196 WMS 25,4 (60X40)R CUS 0800743 202
WCC 26 3240255 547 WIREFOX-D SHIELD 1212172 382 WML HF 22(25X25)R YE CUS 0830834 197 WMS 25,4 (60X40)R YE 0800405 200

612 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Index
Alphabetical

Type Order No. Page Type Order No. Page Type Order No. Page Type Order No. Page

WMS 25,4 (60X40)R YE CUS 0800762 203 WMS 6,4 (30X10)R YE CUS 0800768 203 WP-BASE A M32 3241086 567 WP-FS IP68 PG29 3241171 570
WMS 25,4 (EX40)R 0800296 204 WMS 6,4 (60X10)R 0800367 200 WP-BASE A M40 3241087 567 WP-FS IP68 PG36 3241172 570
WMS 25,4 (EX40)R BK 0800424 205 WMS 6,4 (60X10)R CUS 0800739 202 WP-BASE A PG16 3241079 567 WP-FS IP68 PG7 3241166 570
WMS 25,4 (EX40)R BK CUS 0800732 207 WMS 6,4 (60X10)R YE 0800401 200 WP-BASE A PG21 3241080 567 WP-FS IP68 PG9 3241167 570

WMS 25,4 (EX40)R CUS 0800709 206 WMS 6,4 (60X10)R YE CUS 0800758 203 WP-BASE A PG29 3241081 567 WP-G BRASS IP40 M10 3241044 563
WMS 25,4 (EX40)R YE 0800308 205 WMS 6,4 (EX10)R 0800292 204 WP-BASE A PG36 3241082 567 WP-G BRASS IP40 M12 3241045 563
WMS 25,4 (EX40)R YE CUS 0800722 207 WMS 6,4 (EX10)R BK 0800419 205 WP-BASE C PA HF 10,0 BK 3240958 566 WP-G BRASS IP40 M16 3241046 563
WMS 25,4 (EX40)RL 0800327 204 WMS 6,4 (EX10)R BK CUS 0800728 207 WP-BASE C PA HF 13,0 BK 3240959 566 WP-G BRASS IP40 M20 3241047 563

WMS 25,4 (EX40)RL BK 0800435 205 WMS 6,4 (EX10)R CUS 0800704 206 WP-BASE C PA HF 15,8 BK 3240960 566 WP-G BRASS IP40 M25 3241048 563
WMS 25,4 (EX40)RL YE 0800335 205 WMS 6,4 (EX10)R YE 0800303 205 WP-BASE C PA HF 21,2 BK 3240961 566 WP-G BRASS IP40 M32 3241049 563
WMS 3,2 (15X5)R 0800380 200 WMS 6,4 (EX10)R YE CUS 0800716 207 WP-BASE C PA HF 28,2 BK 3240962 566 WP-G BRASS IP40 M40 3241050 563
WMS 3,2 (15X5)R CUS 0800753 202 WMS 6,4 (EX10)RL 0800322 204 WP-BASE C PA HF 34,5 BK 3240963 566 WP-G BRASS IP40 PG11 3241039 562

WMS 3,2 (15X5)R YE 0800413 200 WMS 6,4 (EX10)RL BK 0800430 205 WP-BASE C PA HF 42,5 BK 3240964 566 WP-G BRASS IP40 PG16 3241040 562
WMS 3,2 (15X5)R YE CUS 0800771 203 WMS 6,4 (EX10)RL YE 0800331 205 WP-BASE HF 13 3240966 567 WP-G BRASS IP40 PG21 3241041 562
WMS 3,2 (15X5)RL 0800390 201 WMS 9,5 (30X16)R 0800377 200 WP-BASE HF 14 3240967 567 WP-G BRASS IP40 PG29 3241042 562
WMS 3,2 (30X5)R 0800374 200 WMS 9,5 (30X16)R CUS 0800751 202 WP-BASE HF 15,8 3240968 567 WP-G BRASS IP40 PG36 3241043 562

WMS 3,2 (30X5)R CUS 0800746 202 WMS 9,5 (30X16)R YE 0800411 200 WP-BASE HF 17 3240969 567 WP-G BRASS IP40 PG7 3241037 562
WMS 3,2 (30X5)R YE 0800408 200 WMS 9,5 (30X16)R YE CUS 0800769 203 WP-BASE HF 22 3240970 567 WP-G BRASS IP40 PG9 3241038 562
WMS 3,2 (30X5)R YE CUS 0800766 203 WMS 9,5 (60X16)R 0800368 200 WP-BASE HF 29 3240971 567 WP-G BRASS IP65 M10 3241058 564
WMS 3,2 (30X5)RL 0800387 201 WMS 9,5 (60X16)R CUS 0800740 202 WP-BASE HF 37 3240972 567 WP-G BRASS IP65 M12 3241059 564

WMS 3,2 (60X5)R 0800364 200 WMS 9,5 (60X16)R YE 0800402 200 WP-BASE HF 45 3240973 567 WP-G BRASS IP65 M16 3241060 564
WMS 3,2 (60X5)R CUS 0800737 202 WMS 9,5 (60X16)R YE CUS 0800759 203 WP-BASE HF 9-10 3240965 567 WP-G BRASS IP65 M20 3241061 564
WMS 3,2 (60X5)R YE 0800399 200 WMS 9,5 (EX16)R 0800293 204 WP-CN BRASS M10 3241145 569 WP-G BRASS IP65 M25 3241062 564
WMS 3,2 (60X5)R YE CUS 0800756 203 WMS 9,5 (EX16)R BK 0800421 205 WP-CN BRASS M12 3241146 569 WP-G BRASS IP65 M32 3241063 564

WMS 3,2 (60X5)RL 0800384 201 WMS 9,5 (EX16)R BK CUS 0800729 207 WP-CN BRASS M16 3241147 569 WP-G BRASS IP65 M40 3241064 564
WMS 3,2 (EX5)R 0800290 204 WMS 9,5 (EX16)R CUS 0800706 206 WP-CN BRASS M20 3241148 569 WP-G BRASS IP65 PG11 3241053 564
WMS 3,2 (EX5)R BK 0800416 205 WMS 9,5 (EX16)R YE 0800304 205 WP-CN BRASS M25 3241149 569 WP-G BRASS IP65 PG16 3241054 564
WMS 3,2 (EX5)R BK CUS 0800726 207 WMS 9,5 (EX16)R YE CUS 0800717 207 WP-CN BRASS M32 3241150 569 WP-G BRASS IP65 PG21 3241055 564

WMS 3,2 (EX5)R CUS 0800702 206 WMS 9,5 (EX16)RL 0800324 204 WP-CN BRASS M40 3241151 569 WP-G BRASS IP65 PG29 3241056 564
WMS 3,2 (EX5)R YE 0800301 205 WMS 9,5 (EX16)RL BK 0800431 205 WP-CN BRASS PG11 3241154 569 WP-G BRASS IP65 PG36 3241057 564
WMS 3,2 (EX5)R YE CUS 0800714 207 WMS 9,5 (EX16)RL YE 0800332 205 WP-CN BRASS PG16 3241155 569 WP-G BRASS IP65 PG7 3241051 564
WMS 3,2 (EX5)RL 0800320 204 WMT 2,4 (15X4)R 0816281 210 WP-CN BRASS PG21 3241156 569 WP-G BRASS IP65 PG9 3241052 564

WMS 3,2 (EX5)RL BK 0800428 205 WMT 2,4 (15X4)R CUS 0824927 210 WP-CN BRASS PG29 3241157 569 WP-G HF IP66 M10 BK 3240895 551
WMS 3,2 (EX5)RL YE 0800329 205 WMT 3,5 (15X5)R 0817222 210 WP-CN BRASS PG36 3241158 569 WP-G HF IP66 M12 BK 3240896 551
WMS 38,1 (60X60)R 0800372 200 WMT 3,5 (15X5)R CUS 0824928 210 WP-CN BRASS PG7 3241152 569 WP-G HF IP66 M16 BK 3240897 551
WMS 38,1 (60X60)R CUS 0800744 202 WMT 4,2 (15X6)R 0817235 210 WP-CN BRASS PG9 3241153 569 WP-G HF IP66 M20 BK 3240898 551

WMS 38,1 (60X60)R YE 0800406 200 WMT 4,2 (15X6)R CUS 0824929 210 WP-CN PA M12 3241132 568 WP-G HF IP66 M25 BK 3240899 551
WMS 38,1 (60X60)R YE CUS 0800764 203 WMT 5,5 (15X8)R 0817248 210 WP-CN PA M16 3241133 568 WP-G HF IP66 M32 BK 3240900 551
WMS 38,1 (EX60)R 0800298 204 WMT 5,5 (15X8)R CUS 0824930 210 WP-CN PA M20 3241134 568 WP-G HF IP66 M40 BK 3240901 551
WMS 38,1 (EX60)R BK 0800425 205 WMT 8,4 (17X10)R 0817251 210 WP-CN PA M25 3241135 568 WP-G HF IP66 PG11 BK 3240890 550

WMS 38,1 (EX60)R BK CUS 0800733 207 WMT 8,4 (17X10)R CUS 0824931 210 WP-CN PA M32 3241136 568 WP-G HF IP66 PG16 BK 3240891 550
WMS 38,1 (EX60)R CUS 0800710 206 WMTB (24X8)R 0816278 211 WP-CN PA M40 3241137 568 WP-G HF IP66 PG21 BK 3240892 550
WMS 38,1 (EX60)R YE 0800309 205 WMTB (24X8)R CUS 0824932 211 WP-CN PA PG11 3241140 569 WP-G HF IP66 PG29 BK 3240893 550
WMS 38,1 (EX60)R YE CUS 0800723 207 WMTB (35X15)R 0817316 211 WP-CN PA PG16 3241141 569 WP-G HF IP66 PG36 BK 3240894 550

WMS 4,8 (15X9)R 0800382 200 WMTB (35X15)R CUS 0824933 211 WP-CN PA PG21 3241142 569 WP-G HF IP66 PG7 BK 3240888 550
WMS 4,8 (15X9)R CUS 0800754 202 WMTB HF (40X12)R 0830407 212 WP-CN PA PG29 3241143 569 WP-G HF IP66 PG9 BK 3240889 550
WMS 4,8 (15X9)R YE 0800414 200 WMTB HF (40X12)R CUS 0830413 212 WP-CN PA PG36 3241144 569 WP-G HF IP69K M10 BK 3240881 551
WMS 4,8 (15X9)R YE CUS 0800772 203 WMTB HF (40X12)R YE 0830408 212 WP-CN PA PG7 3241138 569 WP-G HF IP69K M12 BK 3240882 551

WMS 4,8 (15X9)RL 0800391 201 WMTB HF (40X12)R YE CUS 0830414 212 WP-CN PA PG9 3241139 569 WP-G HF IP69K M16 BK 3240883 551
WMS 4,8 (15X9)RXL 0800397 201 WMTB HF (55X15)R 0830409 212 WP-EC TPE HF 10,0 BK 3240974 549 WP-G HF IP69K M20 BK 3240884 551
WMS 4,8 (30X9)R 0800375 200 WMTB HF (55X15)R CUS 0830415 212 WP-EC TPE HF 13,0 BK 3240975 549 WP-G HF IP69K M25 BK 3240885 551
WMS 4,8 (30X9)R CUS 0800748 202 WMTB HF (55X15)R YE 0830410 212 WP-EC TPE HF 15,8 BK 3240976 549 WP-G HF IP69K M32 BK 3240886 551

WMS 4,8 (30X9)R YE 0800409 200 WMTB HF (55X15)R YE CUS 0830416 212 WP-EC TPE HF 21,2 BK 3240977 549 WP-G HF IP69K M40 BK 3240887 551
WMS 4,8 (30X9)R YE CUS 0800767 203 WMTB HF (55X25)R 0830411 212 WP-EC TPE HF 28,5 BK 3240978 549 WP-G HF IP69K PG11 BK 3240876 551
WMS 4,8 (30X9)RL 0800388 201 WMTB HF (55X25)R CUS 0830417 212 WP-EC TPE HF 34,5 BK 3240979 549 WP-G HF IP69K PG16 BK 3240877 551
WMS 4,8 (30X9)RXL 0800395 201 WMTB HF (55X25)R YE 0830412 212 WP-EC TPE HF 42,5 BK 3240980 549 WP-G HF IP69K PG21 BK 3240878 551

WMS 4,8 (60X9)R 0800366 200 WMTB HF (55X25)R YE CUS 0830418 212 WP-FS HF IP68 M10 3241173 571 WP-G HF IP69K PG29 BK 3240879 551
WMS 4,8 (60X9)R CUS 0800738 202 WMTB-AL (29X8) 0830805 161 WP-FS HF IP68 M12 3241174 571 WP-G HF IP69K PG36 BK 3240880 551
WMS 4,8 (60X9)R YE 0800400 200 WMTB-AL (29X8) CUS 0830807 161 WP-FS HF IP68 M16 3241175 571 WP-G HF IP69K PG7 BK 3240874 551
WMS 4,8 (60X9)R YE CUS 0800757 203 WMTB-AL (40X15) 0830524 161 WP-FS HF IP68 M20 3241176 571 WP-G HF IP69K PG9 BK 3240875 551

WMS 4,8 (60X9)RL 0800385 201 WMTB-AL (40X15) CUS 0830526 161 WP-FS HF IP68 M25 3241177 571 WP-G PP HF M10 3240995 559
WMS 4,8 (60X9)RXL 0800393 201 WMTB-AL (60X15) 0830525 161 WP-FS HF IP68 M32 3241178 571 WP-G PP HF M12 3240996 559
WMS 4,8 (EX9)R 0800291 204 WMTB-AL (60X15) CUS 0830527 161 WP-FS HF IP68 M40 3241179 571 WP-G PP HF M16 3240997 559
WMS 4,8 (EX9)R BK 0800418 205 WMTB-AL (D30) 0830804 161 WP-FS HF IP68 PG11 3241182 571 WP-G PP HF M20 3240998 559

WMS 4,8 (EX9)R BK CUS 0800727 207 WMTB-AL (D30) CUS 0830806 161 WP-FS HF IP68 PG16 3241183 571 WP-G PP HF M25 3240999 559
WMS 4,8 (EX9)R CUS 0800703 206 WMTW (10X4)R 0831000 209 WP-FS HF IP68 PG21 3241184 571 WP-G PP HF M32 3241000 559
WMS 4,8 (EX9)R YE 0800302 205 WMTW (10X4)R CUS 0831008 209 WP-FS HF IP68 PG29 3241185 571 WP-G PP HF M40 3241001 559
WMS 4,8 (EX9)R YE CUS 0800715 207 WMTW (10X4)R YE 0831001 209 WP-FS HF IP68 PG36 3241186 571 WP-G PP HF PG11 3240990 558

WMS 4,8 (EX9)RL 0800321 204 WMTW (10X4)R YE CUS 0831009 209 WP-FS HF IP68 PG7 3241180 571 WP-G PP HF PG16 3240991 558
WMS 4,8 (EX9)RL BK 0800429 205 WMTW (15X4)R 0831002 209 WP-FS HF IP68 PG9 3241181 571 WP-G PP HF PG21 3240992 558
WMS 4,8 (EX9)RL YE 0800330 205 WMTW (15X4)R CUS 0831010 209 WP-FS IP68 M10 3241159 570 WP-G PP HF PG29 3240993 558
WMS 50,8 (EX80)R 0800299 204 WMTW (15X4)R YE 0831003 209 WP-FS IP68 M12 3241160 570 WP-G PP HF PG36 3240994 558

WMS 50,8 (EX80)R BK 0800426 205 WMTW (15X4)R YE CUS 0831011 209 WP-FS IP68 M16 3241161 570 WP-G PP HF PG7 3240988 558
WMS 50,8 (EX80)R BK CUS 0800735 207 WMTW (23X4)R 0831004 209 WP-FS IP68 M20 3241162 570 WP-G PP HF PG9 3240989 558
WMS 50,8 (EX80)R CUS 0800711 206 WMTW (23X4)R CUS 0831007 209 WP-FS IP68 M25 3241163 570 WP-GA HF IP66 M10 BK 3240923 553
WMS 50,8 (EX80)R YE 0800311 205 WMTW (23X4)R YE 0831005 209 WP-FS IP68 M32 3241164 570 WP-GA HF IP66 M12 BK 3240924 553

WMS 50,8 (EX80)R YE CUS 0800724 207 WMTW (23X4)R YE CUS 0831006 209 WP-FS IP68 M40 3241165 570 WP-GA HF IP66 M16 BK 3240925 553
WMS 6,4 (30X10)R 0800376 200 WP-BASE A M16 3241083 567 WP-FS IP68 PG11 3241168 570 WP-GA HF IP66 M20 BK 3240926 553
WMS 6,4 (30X10)R CUS 0800749 202 WP-BASE A M20 3241084 567 WP-FS IP68 PG16 3241169 570 WP-GA HF IP66 M25 BK 3240927 553
WMS 6,4 (30X10)R YE 0800410 200 WP-BASE A M25 3241085 567 WP-FS IP68 PG21 3241170 570 WP-GA HF IP66 M32 BK 3240928 553

PHOENIX CONTACT 613

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Index
Alphabetical

Type Order No. Page Type Order No. Page Type Order No. Page Type Order No. Page

WP-GA HF IP66 M40 BK 3240929 553 WP-OR M32 3241192 571 WP-STEEL S 27 3240864 561 WT-HF 4,5X360 3240768 574
WP-GA HF IP66 PG11 BK 3240918 552 WP-OR M40 3241193 571 WP-STEEL S 36 3240689 561 WT-HF 4,5X360 BK 3240769 575
WP-GA HF IP66 PG16 BK 3240919 552 WP-OR PG11 3241196 571 WP-STEEL S 45 3240690 561 WT-HF 4,5X430 3240770 574
WP-GA HF IP66 PG21 BK 3240920 552 WP-OR PG16 3241197 571 WP-STEEL ZC 10 3240697 560 WT-HF 4,5X430 BK 3240771 575

WP-GA HF IP66 PG29 BK 3240921 552 WP-OR PG21 3241198 571 WP-STEEL ZC 14 3240865 560 WT-HF 7,8X300 3240772 574
WP-GA HF IP66 PG36 BK 3240922 552 WP-OR PG29 3241199 571 WP-STEEL ZC 17 3240698 560 WT-HF 7,8X300 BK 3240773 575
WP-GA HF IP66 PG7 BK 3240916 552 WP-OR PG36 3241200 571 WP-STEEL ZC 21 3240699 560 WT-HF 7,8X365 3240774 574
WP-GA HF IP66 PG9 BK 3240917 552 WP-OR PG7 3241194 571 WP-STEEL ZC 27 3240866 560 WT-HF 7,8X365 BK 3240775 575

WP-GA HF IP69K M10 BK 3240909 553 WP-OR PG9 3241195 571 WP-STEEL ZC 36 3240700 560 WT-HF 7,8X540 3240719 574
WP-GA HF IP69K M12 BK 3240910 553 WP-PA HF 10,0 BK 3240680 549 WP-STEEL ZC 45 3240701 560 WT-HF 7,8X540 BK 3240721 575
WP-GA HF IP69K M16 BK 3240911 553 WP-PA HF 13,0 BK 3240681 549 WS UT 10 3047361 111 WT-HF 9X780 3240778 574
WP-GA HF IP69K M20 BK 3240912 553 WP-PA HF 15,8 BK 3240682 549 WS UT 16 3047374 111 WT-HF 9X780 BK 3240779 575

WP-GA HF IP69K M25 BK 3240913 553 WP-PA HF 21,2 BK 3240683 549 WS UT 2,5 3047923 111 WT-HT HF 2,5X98 3240780 577
WP-GA HF IP69K M32 BK 3240914 553 WP-PA HF 28,5 BK 3240684 549 WS UT 35 3047387 111 WT-HT HF 2,5X98 BK 3240781 577
WP-GA HF IP69K M40 BK 3240915 553 WP-PA HF 34,5 BK 3241088 549 WS UT 4 3047332 111 WT-HT HF 3,6X140 3240782 577
WP-GA HF IP69K PG11 BK 3240904 553 WP-PA HF 42,5 BK 3241089 549 WS UT 6 3047345 111 WT-HT HF 3,6X140 BK 3240783 577

WP-GA HF IP69K PG16 BK 3240905 553 WP-PA HF-HB 10,0 BK 3240838 549 WST 1,5 3030958 111 WT-HT HF 3,6X200 3240784 577
WP-GA HF IP69K PG21 BK 3240906 553 WP-PA HF-HB 13,0 BK 3240839 549 WST 10/35 3030006 111 WT-HT HF 3,6X200 BK 3240785 577
WP-GA HF IP69K PG29 BK 3240907 553 WP-PA HF-HB 15,8 BK 3240840 549 WST 2,5 3030941 111 WT-HT HF 4,5X200 3240786 577
WP-GA HF IP69K PG36 BK 3240908 553 WP-PA HF-HB 21,2 BK 3240841 549 WST 4 3030954 111 WT-HT HF 4,5X200 BK 3240787 577

WP-GA HF IP69K PG7 BK 3240902 553 WP-PA HF-HB 28,5 BK 3240842 549 WST 6 3030967 111 WT-HT HF 4,5X290 3240788 577
WP-GA HF IP69K PG9 BK 3240903 553 WP-PA HF-HB 34,5 BK 3240843 549 WT-BASE HF 5 3240702 582 WT-HT HF 4,5X290 BK 3240789 577
WP-GR HF IP66 M12 BK 3240952 555 WP-PA HF-HB 42,5 BK 3240844 549 WT-BASE HF 5 BK 3240703 582 WT-HT HF 7,8X365 3240792 577
WP-GR HF IP66 M16 BK 3240953 555 WP-PA HF-SL 21,2 BK 3240845 548 WT-BASE HF 9 3240704 582 WT-HT HF 7,8X365 BK 3240793 577

WP-GR HF IP66 M20 BK 3240954 555 WP-PA HF-SL 28,5 BK 3240846 548 WT-BASE HF 9 BK 3240705 582 WT-ID HF 2,5X98 BU 3240794 579
WP-GR HF IP66 M25 BK 3240955 555 WP-PA HF-SL 34,5 BK 3240847 548 WT-BASE LS HF 4 3240706 582 WT-ID HF 3,5X140 BU 3240795 579
WP-GR HF IP66 M32 BK 3240956 555 WP-PA HF-SL 42,5 BK 3240848 548 WT-BASE LS HF 4 BK 3240707 582 WT-ID HF 3,5X200 BU 3240796 579
WP-GR HF IP66 M40 BK 3240957 555 WP-SC BRASS 10 3241065 561 WT-BASE LS HF 6 3240708 582 WT-ID HF 4,5X200 BU 3240797 579

WP-GR HF IP66 PG11 BK 3240946 554 WP-SC BRASS 14 3241066 561 WT-BASE LS HF 6 BK 3240709 582 WT-ID HF 4,5X290 BU 3240798 579
WP-GR HF IP66 PG16 BK 3240947 554 WP-SC BRASS 17 3241067 561 WT-BASE P HF 9,5 BK 3240710 583 WT-ID HF 7,5X365 BU 3240800 579
WP-GR HF IP66 PG21 BK 3240948 554 WP-SC BRASS 21 3241068 561 WT-BASE R HF 8 3240711 583 WT-R HF 3,6X150 3240801 579
WP-GR HF IP66 PG29 BK 3240949 554 WP-SC BRASS 27 3241069 561 WT-D HF 7,5X200 3240712 578 WT-R HF 4,8X200 3240803 579

WP-GR HF IP66 PG36 BK 3240950 554 WP-SC BRASS 36 3241070 561 WT-D HF 7,5X200 BK 3240713 578 WT-STEEL S 4,6X1067 3240805 580
WP-GR HF IP66 PG7 BK 3240944 554 WP-SC BRASS 45 3241071 561 WT-D HF 7,5X250 3240714 578 WT-STEEL S 4,6X150 3240807 580
WP-GR HF IP66 PG9 BK 3240945 554 WP-SC BRASS WP PVC 10 3241072 564 WT-D HF 7,5X250 BK 3240715 578 WT-STEEL S 4,6X201 3240808 580
WP-GR HF IP69K M12 BK 3240938 555 WP-SC BRASS WP PVC 14 3241073 564 WT-D HF 7,5X350 3240716 578 WT-STEEL S 4,6X259 3240809 580

WP-GR HF IP69K M16 BK 3240939 555 WP-SC BRASS WP PVC 17 3241074 564 WT-D HF 7,5X350 BK 3240717 578 WT-STEEL S 4,6X360 3240810 580
WP-GR HF IP69K M20 BK 3240940 555 WP-SC BRASS WP PVC 21 3241075 564 WT-E HF 3,6X150 3240718 578 WT-STEEL S 4,6X520 3240811 580
WP-GR HF IP69K M25 BK 3240941 555 WP-SC BRASS WP PVC 27 3241076 564 WT-E HF 4,8X200 3240720 578 WT-STEEL S 4,6X679 3240812 580
WP-GR HF IP69K M32 BK 3240942 555 WP-SC BRASS WP PVC 36 3241077 564 WT-E HF 7,8X200 3240722 578 WT-STEEL S 4,6X838 3240723 580

WP-GR HF IP69K M40 BK 3240943 555 WP-SC BRASS WP PVC 45 3241078 564 WT-E HF 7,8X300 3240724 578 WT-STEEL S 7,9X1067 3240813 580
WP-GR HF IP69K PG11 BK 3240932 555 WP-SC HF 10 3241016 557 WT-E HF 7,8X380 3240726 578 WT-STEEL S 7,9X259 3240814 580
WP-GR HF IP69K PG16 BK 3240933 555 WP-SC HF 14 3241017 557 WT-HF 12,6X1000 3240728 574 WT-STEEL S 7,9X360 3240815 580
WP-GR HF IP69K PG21 BK 3240934 555 WP-SC HF 17 3241018 557 WT-HF 12,6X1000 BK 3240729 575 WT-STEEL S 7,9X520 3240816 580

WP-GR HF IP69K PG29 BK 3240935 555 WP-SC HF 21 3241019 557 WT-HF 12,6X850 3240730 574 WT-STEEL S 7,9X679 3240817 580
WP-GR HF IP69K PG36 BK 3240936 555 WP-SC HF 27 3241020 557 WT-HF 12,6X850 BK 3240731 575 WT-STEEL S 7,9X838 3240725 580
WP-GR HF IP69K PG7 BK 3240930 555 WP-SC HF 36 3241021 557 WT-HF 2,5X98 3240732 574 WT-STEEL SH 4,6X1067 3240818 581
WP-GR HF IP69K PG9 BK 3240931 555 WP-SC HF 45 3241022 557 WT-HF 2,5X98 BK 3240733 575 WT-STEEL SH 4,6X150 3240820 581

WP-GT BRASS M10 3241030 563 WP-SC PA HF 10,0 BK 3240981 549 WT-HF 2,5X98 BK-L 3240734 575 WT-STEEL SH 4,6X201 3240821 581
WP-GT BRASS M12 3241031 563 WP-SC PA HF 13,0 BK 3240982 549 WT-HF 2,5X98-L 3240735 574 WT-STEEL SH 4,6X259 3240822 581
WP-GT BRASS M16 3241032 563 WP-SC PA HF 15,8 BK 3240983 549 WT-HF 2,6X160 3240736 574 WT-STEEL SH 4,6X360 3240823 581
WP-GT BRASS M20 3241033 563 WP-SC PA HF 21,2 BK 3240984 549 WT-HF 2,6X160 BK 3240737 575 WT-STEEL SH 4,6X520 3240824 581

WP-GT BRASS M25 3241034 563 WP-SC PA HF 28,5 BK 3240985 549 WT-HF 2,6X160 BK-L 3240738 575 WT-STEEL SH 4,6X679 3240825 581
WP-GT BRASS M32 3241035 563 WP-SC PA HF 34,5 BK 3240986 549 WT-HF 2,6X160-L 3240739 574 WT-STEEL SH 4,6X838 3240727 581
WP-GT BRASS M40 3241036 563 WP-SC PA HF 42,5 BK 3240987 549 WT-HF 2,6X200 3240740 574 WT-STEEL SH 7,9X1067 3240826 581
WP-GT BRASS PG11 3241025 563 WP-SPIRAL PU C HF 10 3240856 557 WT-HF 2,6X200 BK 3240741 575 WT-STEEL SH 7,9X259 3240827 581

WP-GT BRASS PG16 3241026 563 WP-SPIRAL PU C HF 14 3240857 557 WT-HF 2,6X200 BK-L 3240742 575 WT-STEEL SH 7,9X360 3240828 581
WP-GT BRASS PG21 3241027 563 WP-SPIRAL PU C HF 17 3240858 557 WT-HF 2,6X200-L 3240743 574 WT-STEEL SH 7,9X520 3240829 581
WP-GT BRASS PG29 3241028 563 WP-SPIRAL PU C HF 21 3240859 557 WT-HF 3,6X140 3240744 574 WT-STEEL SH 7,9X679 3240830 581
WP-GT BRASS PG36 3241029 563 WP-SPIRAL PU C HF 27 3240860 557 WT-HF 3,6X140 BK 3240745 575 WT-STEEL SH 7,9X838 3240766 581

WP-GT BRASS PG7 3241023 563 WP-SPIRAL PU C HF 36 3240861 557 WT-HF 3,6X140 BK-L 3240746 575 WT-UV HF 2,5X98 BK 3240831 576
WP-GT BRASS PG9 3241024 563 WP-SPIRAL PU C HF 45 3240862 557 WT-HF 3,6X140-L 3240747 574 WT-UV HF 3,6X140 BK 3240832 576
WP-GT PP HF M12 3241010 559 WP-SPIRAL PVC C 10 3240849 556 WT-HF 3,6X200 3240748 574 WT-UV HF 3,6X200 BK 3240833 576
WP-GT PP HF M16 3241011 559 WP-SPIRAL PVC C 14 3240850 556 WT-HF 3,6X200 BK 3240749 575 WT-UV HF 4,5X200 BK 3240834 576

WP-GT PP HF M20 3241012 559 WP-SPIRAL PVC C 17 3240851 556 WT-HF 3,6X200 BK-L 3240750 575 WT-UV HF 4,5X290 BK 3240835 576
WP-GT PP HF M25 3241013 559 WP-SPIRAL PVC C 21 3240852 556 WT-HF 3,6X200-L 3240751 574 WT-UV HF 7,8X365 BK 3240837 576
WP-GT PP HF M32 3241014 559 WP-SPIRAL PVC C 27 3240853 556 WT-HF 3,6X290 3240752 574
WP-GT PP HF M40 3241015 559 WP-SPIRAL PVC C 36 3240854 556 WT-HF 3,6X290 BK 3240753 575

WP-GT PP HF PG11 3241004 559 WP-SPIRAL PVC C 45 3240855 556 WT-HF 3,6X290 BK-L 3240754 575
WP-GT PP HF PG16 3241005 559 WP-STEEL PVC C 10 3240867 564 WT-HF 3,6X290-L 3240755 574
WP-GT PP HF PG21 3241006 559 WP-STEEL PVC C 14 3240868 564 WT-HF 4,5X160 3240756 574
WP-GT PP HF PG29 3241007 559 WP-STEEL PVC C 17 3240869 564 WT-HF 4,5X160 BK 3240757 575 X
WP-GT PP HF PG36 3241008 559 WP-STEEL PVC C 21 3240870 564 WT-HF 4,5X160 BK-L 3240758 575 X-PEN 0,35 0811228 49
WP-GT PP HF PG7 3241002 559 WP-STEEL PVC C 27 3240871 564 WT-HF 4,5X160-L 3240759 574
WP-GT PP HF PG9 3241003 559 WP-STEEL PVC C 36 3240872 564 WT-HF 4,5X200 3240760 574
WP-OR M10 3241187 571 WP-STEEL PVC C 45 3240873 564 WT-HF 4,5X200 BK 3240761 575

WP-OR M12 3241188 571 WP-STEEL S 10 3240686 561 WT-HF 4,5X200 BK-L 3240762 575
WP-OR M16 3241189 571 WP-STEEL S 14 3240687 561 WT-HF 4,5X200-L 3240763 574
WP-OR M20 3241190 571 WP-STEEL S 17 3240863 561 WT-HF 4,5X290 3240764 574
WP-OR M25 3241191 571 WP-STEEL S 21 3240688 561 WT-HF 4,5X290 BK 3240765 575

614 PHOENIX CONTACT

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
 Index
Alphabetical

Type Order No. Page Type Order No. Page Type Order No. Page Type Order No. Page

ZB10/WH-100:UNBEDRUCKT 5060883 72
ZBF 12 CUS 0825018 79
ZBF 12:UNBEDRUCKT 0809735 79
Z ZBF 13 CUS 0829134 80

ZAP 25 1203110 472 ZBF 13:UNBEDRUCKT 0829133 80

ZAP 25 T 1203123 473 ZBF 15 CUS 0825019 80
ZAP 100 1203259 473 ZBF 15:UNBEDRUCKT 0811202 80
ZAP 100 T 1203262 473 ZBF 16 CUS 0827465 81

ZAP 40 1212630 472 ZBF 16:UNPRINTED 0827464 81

ZB 10 CUS 0824941 72 ZBF 17 CUS 0825020 81
ZB 10:UNBEDRUCKT 1053001 72 ZBF 17:UNBEDRUCKT 0815020 81
ZB 12 CUS 0824942 73 ZBF 19,7 CUS 0825021 81

ZB 12,LGS:L1-N,PE 0812146 73 ZBF 19,7:UNBEDRUCKT 0810627 81

ZB 12:UNPRINTED 0812120 73 ZBF 3,5 CUS 0829394 76
ZB 13 CUS 0829132 73 ZBF 3,5,LGS:FORTL.ZAHLEN 0801406 76
ZB 13:UNBEDRUCKT 0829131 73 ZBF 3,5,QR:FORTL.ZAHLEN 0801407 76

ZB 15 CUS 0824945 73 ZBF 3,5:UNBEDRUCKT 0829392 76

ZB 15,LGS:L1-N,PE 0811998 73 ZBF 4 CUS 0825023 77
ZB 15:UNBEDRUCKT 0811972 73 ZBF 4,LGS:FORTL.ZAHLEN 0808626 77
ZB 16,3 CUS 0824946 74 ZBF 4,LGS:GERADE ZAHLEN 0810818 77

ZB 16,3:UNPRINTED 0820222 74 ZBF 4,LGS:UNGERADE ZAHLEN 0810850 77

ZB 17 CUS 0829393 74 ZBF 4,QR:FORTL.ZAHLEN 0808820 77
ZB 17:UNBEDRUCKT 0829391 74 ZBF 4/WH-100:UNBEDRUCKT 0808613 77
ZB 18 CUS 0824947 75 ZBF 4:UNBEDRUCKT 0808587 77

ZB 18,LGS:L1-N,PE 0811846 75 ZBF 5 CUS 0825025 77

ZB 18:UNBEDRUCKT 0811833 75 ZBF 5,LGS:FORTL.ZAHLEN 0808671 77
ZB 22 CUS 0824949 75 ZBF 5,LGS:GERADE ZAHLEN 0810821 77
ZB 22,LGS:L1-N,PE 0811875 75 ZBF 5,LGS:UNGERADE ZAHLEN 0810863 77

ZB 22:UNBEDRUCKT 0811862 75 ZBF 5,QR:FORTL.ZAHLEN 0808697 77

ZB 3,5 CUS 0829415 68 ZBF 5/WH-100:UNBEDRUCKT 0808668 77
ZB 3,5,LGS:FORTL.ZAHLEN 0801404 68 ZBF 5:UNBEDRUCKT 0808642 77
ZB 3,5,QR:FORT.ZAHLEN 0801405 68 ZBF 6 CUS 0825027 77

ZB 3,5:UNBEDRUCKT 0829414 68 ZBF 6,LGS:FORTL.ZAHLEN 0808749 77

ZB 4 :UNBEDRUCKT 0805001 69 ZBF 6,LGS:GERADE ZAHLEN 0810834 77
ZB 4 CUS 0824951 69 ZBF 6,LGS:UNGERADE ZAHLEN 0810876 77
ZB 4,LGS:FORTL.ZAHLEN 0805739 69 ZBF 6,QR:FORTL.ZAHLEN 0808765 77

ZB 4,QR:FORTL.ZAHLEN 0805807 69 ZBF 6/WH-100:UNBEDRUCKT 0808736 77

ZB 4/WH-100:UNBEDRUCKT 0805810 69 ZBF 6:UNBEDRUCKT 0808710 77
ZB 5 :UNBEDRUCKT 1050004 69 ZBF 7,5 CUS 0825028 78
ZB 5 CUS 0824962 69 ZBF 7,5,LGS:FORTL.ZAHLEN 0809955 78

ZB 5,08 CUS 0824963 69 ZBF 7,5,QR:FORTL.ZAHLEN 0809968 78

ZB 5,08,LGS:FORTL.ZAHLEN 0809803 69 ZBF 7,5:UNBEDRUCKT 0809942 78
ZB 5,08,LGS:L1-N,PE 0809832 69 ZBF 8 CUS 0825030 78
ZB 5,08,LGS:U-N 0809845 69 ZBF 8,LGS:FORTL.ZAHLEN 0808804 78

ZB 5,08,QR:FORTL.ZAHLEN 0809858 69 ZBF 8:UNBEDRUCKT 0808781 78

ZB 5,08:UNBEDRUCKT 0809793 69 ZBF 9 CUS 0829130 79
ZB 5,LGS:FORTL.ZAHLEN 1050017 69 ZBF 9:UNBEDRUCKT 0829129 79
ZB 5,LGS:GLEICHE ZAHLEN 1050033 69 ZBF10 CUS 0825031 79

ZB 5,LGS:L1-N,PE 1050415 69 ZBF10,LGS:FORTL.ZAHLEN 0810009 79

ZB 5,QR:FORTL.ZAHLEN 1050020 69 ZBF10,QR:FORTL.ZAHLEN 0810025 79
ZB 5/WH-100:UNBEDRUCKT 5060906 69 ZBF10:UNBEDRUCKT 0809997 79
ZB 6 CUS 0824992 70

ZB 6,6 CUS 0824978 70

ZB 6,6,LGS:FORTL.ZAHLEN 1052345 70
ZB 6,6:UNBEDRUCKT 1052332 70
ZB 6,LGS:FORTL.ZAHLEN 1051016 70

ZB 6,LGS:GLEICHE ZAHLEN 1051032 70

ZB 6,LGS:L1-N,PE 1051414 70
ZB 6,LGS:U-N 1051430 70
ZB 6,QR:FORTL.ZAHLEN 1051029 70

ZB 6:UNBEDRUCKT 1051003 70
ZB 7,5 CUS 0824994 71
ZB 7,5:UNBEDRUCKT 0803948 71
ZB 7,62 CUS 0824997 71

ZB 7,62,LGS:FORTL.ZAHLEN 1054233 71
ZB 7,62/WH-100:UNBEDRUCKT 5060922 71
ZB 7,62:UNBEDRUCKT 1054000 71
ZB 8 CUS 0825011 71

ZB 8,LGS:FORTL.ZAHLEN 1052015 71
ZB 8,LGS:L1-N,PE 1052413 71
ZB 8,QR:FORTL.ZAHLEN 1052028 71
ZB 8/WH-100:UNBEDRUCKT 5060896 71

ZB 8:UNBEDRUCKT 1052002 71
ZB 9 CUS 0829128 72
ZB 9:UNBEDRUCKT 0829127 72
ZB10,LGS:FORTL.ZAHLEN 1053014 72

ZB10,LGS:GLEICHE ZAHLEN 1053030 72

ZB10,LGS:L1-N,PE 1053412 72
ZB10,LGS:U-N 1053438 72
ZB10,QR:FORTL.ZAHLEN 1053027 72

PHOENIX CONTACT 615

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com