MobileFeed 301AVS
A versatile voltage-sensing Wire feeder for
use with any CV or CC welding power supply.
The MobileFeed 301AVS is a portable, durable wire
feeder with the most advanced features to meet today’s
welding requirements. Built for the toughest welding
conditions, the rugged case stands up to demanding
work environments and provides optimal protection
for internal components. The MobileFeed 301AVS is
available with and without remote, with EURO and
Tweco connection. The remote option is only available
TM
when used with the Warrior power supply.
TM
Quick-change, four-roll drive reduces downtime and
provides consistent feeding results; rolls are easily
changed from one wire size to another without the
need for tools
Sun-friendly display is easy to read outdoors and from
a wide range of angles
Digital meters for both Voltage and WFS ensure more
arc time, are labor-saving and beneficial for critical welds
using specific welding procedures
Rugged case withstands the harshest environments,
keeping downtime for repairs to a minimum; robustly
designed rubber-mounted internals prevents damage
caused by drops and impacts
Remote control allows voltage to be adjusted away from
the power supply, reducing setup time and enabling long
welds in difficult-to-reach areas
Visit esab.com for more information.
Industry
Shipbuilding
Barge building
Construction
Railcar
Field Repair
MobileFeed 301AVS
Specifications
Permitted load: 400A @ 100% duty cycle
450A @ 60% duty cycle
Wire speed range, ipm (m/min) 50 - 750 ipm (1.3 – 19.0 m/min)
Wire diameter capacity, in. (mm) .045 (1.2) -1/16 (1.6) Knurled drive rolls as delivered
Range .023 (0.6)- 5/64 (2.0)
Max. spool diameter, in. (mm) 12 (304.8)
Weight, lbs. (kg) 35 (15.9) without spool
Dimensions, LxWxH, in. (mm) 21x17x8 (534x435x207)
Enclosure class IP23
Trigger Lock standard
CV – CC switch
Gas Purge standard
Comes with Euro-Kwik or Tweco™ gun connector
Digital meters hold last condition for ten seconds after welding
Tachometer feedback system on the wire feed speed (WFS) - you get what you set
10 turn pot for accurate WFS setting
Ramp-start function (less spatter on weld starts)
Case lays flat when opened
Ordering Information
Description Part Number
MobileFeed 301 w/meter 0558101918
MobileFeed 301 w/meter & remote 0558101919
MobileFeed 301 w/meter (Tweco) 0558102195
Options & Accessories
Description Part Number
OKC50 female cable connector, 1/0-4/0 cable (50 mm²) 13735631
OKC50 male cable connector, 1/0-4/0 cable (50 mm²) 13792513
Cable remote MF201/301, 25 ft. (7.5 m) 0558102197
Cable remote MF201/301, 49 ft. (15 m) 0558102198
Cable remote MF201/301, 98 ft. (30 m) 0558102199
Gas meter (measures gas flow at the gun) 19043
Spool adaptor for adapting to 8 in. (203 mm) diameter spools 0455410001
MobileFeed 301AVS
Wear & Spare Parts - EURO
Wire Diameter,
in. (mm) Description Roll Qty Guide Tube Qty Center Guide Qty Inlet Guide Qty
.023 (0.6) V-Solid 21155 2 0558001077 1 0558001757 1 0558001758 1
.030 (0.8) V-Solid 21155 2 0558001077 1 0558001757 1 0558001758 1
.035 (0.9) V-Solid 21156 2 0558001078 1 0558001757 1
1 0558001758 1
.045 (1.2) V-Solid 21156 2 0558001078 1 0558001757 1
1 0558001758 1
.052 (1.4) V-Solid 21157 2 0558001079 1 0558001757 1 0558001758 1
1/16 (1.6) V-Solid 21157 2 0558001079 1 0558001757 1 0558001758 1
.030 (0.8) K-Cored 21160 2 0558001077 1 0558001757 1 0558001758 1
.035 (0.9) K-Cored 21160 2 0558001078 1 0558001757 1 0558001758 1
.045 (1.2) K-Cored 21161 2 0558001079 1 0558001757 1 0558001758 1
.052 (1.4) K-Cored 21161 2 0558001079 1 0558001757 1 0558001758 1
1/16 (1.6) K-Cored 21161 2 0558001079 1 0558001757 1 0558001758 1
5/64 (2.0) K-Cored 21162 2 0558001079 1 0558001757 1 0558001758 1
3/64 (1.2) U-Soft 21159 2 0558001898 1 0558001895 1 0558001758 1
1/16 (1.6) U-Soft 21159 2 0558001898 1 0558001895 1 0558001758 1
Two lower drive rolls are required for four roll drive systems.
Wear & Spare Parts - Tweco
Wire Diameter,
in. (mm) Description Roll Qty Guide Tube Qty Center Guide Qty Inlet Guide Qty
.023 (0.6) V-Solid 21155 2 0558001499 1 0558001757 1 0558001758 1
.030 (0.8) V-Solid 21155 2 0558001499 1 0558001757 1 0558001758 1
.035 (0.9) V-Solid 21156 2 0558001498 1 0558001757 1
1 0558001758 1
.045 (1.2) V-Solid 21156 2 0558001498 1 0558001757 1
1 0558001758 1
.052 (1.4) V-Solid 21157 2 0558001497 1 0558001757 1 0558001758 1
1/16 (1.6) V-Solid 21157 2 0558001497 1 0558001757 1 0558001758 1
.030 (0.8) K-Cored 21160 2 0558001499 1 0558001757 1 0558001758 1
.035 (0.9) K-Cored 21160 2 0558001498 1 0558001757 1 0558001758 1
.045 (1.2) K-Cored 21161 2 0558001497 1 0558001757 1 0558001758 1
.052 (1.4) K-Cored 21161 2 0558001497 1 0558001757 1 0558001758 1
1/16 (1.6) K-Cored 21161 2 0558001497 1 0558001757 1 0558001758 1
5/64 (2.0) K-Cored 21162 2 0558001497 1 0558001757 1 0558001758 1
3/64 (1.2) U-Soft 21159 2 0558001904 1 0558001895 1 0558001758 1
1/16 (1.6) U-Soft 21159 2 0558001904 1 0558001895 1 0558001758 1
ARC-23317A NA/EN 05/15
ESAB / esab.com
