Scribd
Upload
690 views1 page

U. S. Oil & Refining Co.: Naval Distillate, F-76

U.S. Oil & Refining Co. provides specifications for Naval Distillate F-76, including limits for various properties such as appearance, color, acid number, sulfur content, distillation results, density, viscosity, cloud point, pour point, ash, corrosion resistance, storage stability, particulate content, and demulsification time. The fuel must conform to military specification MIL-DTL-16884L and is prohibited from containing red dye.

Uploaded by

Ashwani Kumar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
690 views1 page

U. S. Oil & Refining Co.: Naval Distillate, F-76

U.S. Oil & Refining Co. provides specifications for Naval Distillate F-76, including limits for various properties such as appearance, color, acid number, sulfur content, distillation results, density, viscosity, cloud point, pour point, ash, corrosion resistance, storage stability, particulate content, and demulsification time. The fuel must conform to military specification MIL-DTL-16884L and is prohibited from containing red dye.

Uploaded by

Ashwani Kumar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

U. S. Oil & Refining Co.

3001 Marshall Avenue, Tacoma, Washington, 98421 (253) 383-1651

Naval Distillate, F-76

Property ASTM Method Specifications


Min. Max
Appearance, @ greater of 25°C or ambient D 4176 a Clear & Bright
Color D 1500 a 3
Acid Number, mg KOH/g D 974 a&b 0.30
Sulfur, mass % D 4294 a 0.5e
Hydrogen Content, mass % D 4808 a 12.5
Trace Metals, ppm D 3605 a
Calcium 1.0
Lead 0.5
Sodium + Potassium 1.0
Vanadium 0.5
Distillation, °C D 86
– 10% Recovered Report
-50% Recovered Report
-90% Recovered 357
Final Boiling Point b 385
Residue + Loss, Volume % 3.0
Flash Point, °C D 93 60
3 a
Density @ 15°C, kg/m D 4052 876
2
Viscosity, @ 40°C, mm /sec (cSt) D 445 1.7 4.3
Cloud Point, °C
a&b
D 5771 -1
Pour Point, °C D 5950 a&b -6
Ash, mass % D 482 0.005
Carbon Residue, (10% Bottoms), mass % c D 4530 a 0.14
Corrosion, Copper Strip @ 100°C D 130 1B
Storage Stability, total insolubles, mg/100ml D 2274 a&b 1.5
Particulate, mg/liter D 5452 a&b 10
Demulsification, @ 25°C, minutes D 1401 b 10
Cetane Index c D 976 a 43
Red dye Prohibited d
Conforms to MIL-DTL-16884L
a. See MIL-DTL-16884L for alternate method.
b. See MIL-DTL-16884L for method exception.
c. See MIL-DTL-16884L for specific reporting requirements.
d. See Solicitation & Contract for exception or alternative.
e. Effective 2008. Until then, limit is 1.0 mass %.

F:\GRP\Product Specs\F-76.doc Page 3.4


Revision Y 1/25/07

You might also like