Scribd
Upload
83 views1 page

Structural Design Parameters Overview

This document compares provisions for material properties, seismic design, and wind load calculations from several international codes including ECP 203-2018, ACI 318-19M, BS8110-97, EuroCode, and SBC 301. It lists equations for calculating modulus of elasticity, tensile strength, acceleration-time histories, seismic coefficients, and wind speed factors according to each code. The codes are also compared regarding definitions of ground type, site class, behavior factor, risk category, and other seismic and wind load design parameters.

Uploaded by

hussam
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
83 views1 page

Structural Design Parameters Overview

This document compares provisions for material properties, seismic design, and wind load calculations from several international codes including ECP 203-2018, ACI 318-19M, BS8110-97, EuroCode, and SBC 301. It lists equations for calculating modulus of elasticity, tensile strength, acceleration-time histories, seismic coefficients, and wind speed factors according to each code. The codes are also compared regarding definitions of ground type, site class, behavior factor, risk category, and other seismic and wind load design parameters.

Uploaded by

hussam
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

Created by: Khaled Sobhy Emam

Demonstrator, Faculty of Engineering - Ain Shams University


[Link]@[Link]

ECP 203-2018 ACI 318-19M BS8110-97 EuroCode SBC 301


Material Ec 4400*(fcu)^0.5 4700*(fc')^0.5 1000*(20+0.2fcu) 22000*[(fck+8)/100]^0.3 4700*(fc')^0.5
fctr 0.6*(fcu)^0.5 0.33*(fc')^0.5 0.55 Mpa 0.3*fck^(2/3) 0.62*(fc')^0.5
ag/g= ECP201-2012 (8.4.1) ag/g = According to the studied zone Ground type= EN1998-1:2001 (3.1.2)
Function response Ss & S1 = ASCE7-16 (11.4.2) Ss & S1 =SBC301 (9.4.1)
Ground type= ECP201-2012 (8.3.2) Spectrum type= EN1998-1:2001 ([Link] 2(P))
spectrum Site class = ASCE 7-16 (11.4.3) Site class = SBC301 (14.1.1)
Behavior factor= ECP201-2012 (8-A) Behaviour factor = EN1998-1:2001 ([Link])

ag/g = According to the studied zone Ground type= EN1998-1:2001 (3.1.2)


ag/g= ECP201-2012 (8.4.1) Ct, X = ASCE 7-16 (12.8-2) Ct, X = SBC301 ([Link])
Spectrum type= EN1998-1:2001 ([Link] 2(P))
EQ Ground type= ECP201-2012 (8.3.2) R,Omega, Cd = ASCE 7-16 (12.2-1) R,Omega, Cd = SBC301 (10.2)
Behaviour factor = EN1998-1:2001 ([Link])
Behavior factor= ECP201-2012 (8-A) Risk category = ASCE 7-16 (1.5-1&2) Impotance factor= SBC301 (9.5)
Correction factor = EN1998-1:2001 ([Link].2)

e1&e2 = ASCE 7-16 (27.3-8) Wind exposure parameters= BS6399-2


Load Pattern Wind speed=SBC301 (6.4.1) Exposure
Wind speed= ASCE 7-16 (26.5) (2.3)
Terrain category= EN 1-2005 (Table 4.1) type= SBC301 ([Link]) Ground elev.
Exposure type= ASCE 7-16 (26.7.3) Effective speed= BS6399-2 (2.2.3)
Recommended to be manual input Orography factor= EN 1-2005 (4.3.3) factor = SBC301 (7.2-2) Topographic
Wind Ground elev. factor = ASCE 7-16 (26.9) Size effect factor= BS6399-2 ([Link])
(user defined) Turbulence factor= (4.4) factor= SBC301 ([Link]) Guest
Topographic factor= ASCE 7-16 (26.8.2) diagonal dimension= BS6399-2 (2.6)
Structural factor= EN 1-2005 (6.2) factor= SBC301 (7.2.7) Directionally
Guest factor= ASCE 7-16 (26.11) Dynamic Augment Factor= BS6399-2
factor= SBC301 (6.4-1)
Directionally factor= ASCE 7-16 (26.6) (1.6.1)
Seismic Design Category= ASCE 7-16 Seismic Design Category= SBC301
Design prefrences (11.6) Omega= ASCE 7-16 (12.2-1) (table 9.6) Omega= SBC301 (10.2)
Sds= As calculated Sds= As calculated

You might also like