Scribd
Upload
80 views1 page

Notice of Authorization To Apply The Ul Mark: Alecia Jones

This notice authorizes Fike Corp to apply the UL Listing Mark to their ProInert product. The UL investigation determined the product complied with applicable requirements. This temporary authorization allows application of the UL Mark only at Fike Corp's factory location according to UL's Follow-Up Service Program. Any changes to the product's construction could risk withdrawal of UL Mark use.

Uploaded by

XIN NIUNIU
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
80 views1 page

Notice of Authorization To Apply The Ul Mark: Alecia Jones

This notice authorizes Fike Corp to apply the UL Listing Mark to their ProInert product. The UL investigation determined the product complied with applicable requirements. This temporary authorization allows application of the UL Mark only at Fike Corp's factory location according to UL's Follow-Up Service Program. Any changes to the product's construction could risk withdrawal of UL Mark use.

Uploaded by

XIN NIUNIU
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

NOTICE OF AUTHORIZATION TO APPLY THE UL MARK

2007-07-16
Mr. Brent Mlika
Fike Corp
704 S 10th St Po Box 610
Blue Springs, MO 64015
United States

E-mail: [email protected]
Reference: File S2203 Project 07CA32038 P.O. Number 91857 OP
Product: USL- COMPATIBILITY MANUAL APPROVAL - ProInert

Dear Mr. Mlika,


Any information and documentation involving UL Mark services are provided on behalf of Underwriters
Laboratories Inc. (UL) or any authorized licensee of UL.
UL’s investigation of your product has been completed under the above project number and the subject product
was determined to comply with the applicable requirements.
This letter temporarily supplements the UL Follow-Up Services Procedure and serves as authorization to apply
the UL Listing Mark only at the factory under UL’s Follow-Up Service Program to the subject product, which is
constructed as described below:
Identical to the subject model, which was submitted to UL for this investigation. The UL Records
covering the product will be in the Follow-Up Services Procedure, File S2203, Volume 1.
This authorization applies only to the address on this letter.
This authorization is effective from the date of this Notice and only for products at the indicated manufacturing
locations. Records in the Follow-Up Services Procedure covering the product are now being prepared and will
be sent to the indicated manufacturing locations in the near future. Please note that Follow-Up Services
Procedures are sent to the manufacturers only unless the Applicant specifically requests this document.
Products that bear the UL Mark shall be identical to those that were evaluated by UL and found to comply with
UL’s requirements. If changes in construction are discovered, appropriate action will be taken for products not
in conformance with UL’s requirements and continued use of the UL Mark may be withdrawn.
Sincerely, Reviewed by:
Alecia Jones

Alecia Jones Derek Mathews


Technical Correspondent PDE
Department: 3017CNBK Department: 3017CNBK
Tel: 847.664.3915 E-mail: derek [email protected]
Fax: (847) 313-3915
E-mail: [email protected]

You might also like