DFH14102W

Dear Customer,
Control Panel...................................................3
Please carefully read this manual bef ore using the
Dishwasher Features.................................... ...3
dishwasher, it will help you to use and maintain the
dishwasher properly.
Keep it to refer to it at a later date.
Pass it on to any subsequent owner of the appliance. A、Water Softener...........................................4
This manual contains sections on safety Instructions, B、Loading the Salt in to the Softener.................5
Operating Instructions, Installation Instruc tions and C、Fill the Rinse Aid Dispenser.........................5
Troubleshooting Tips, etc. D、Function of Detergent .................................6

Attention before or after loading the Dishwasher

Baskets..........................................................9
The Method Loading Normal Dishware.............10

To review the section on troubleshooting Tips Wash Cycle Table...........................................11

will help you to solve some common problems Turning on the Appliance................................12
by yourself . Change the Programme.............. .... ................12
At the end of the Wash Cycle...........................12
If you can not solv e the problems by yourself ,
please ask for the help of professional technicians.

Filtering System.............................................13
Caring for the Dishwasher..................... . .........14

Positioning the Applian ce................... .. ..........15

The manufacturer, following a policy of con stant
About Power Connection........................ . .......15
dev elopment and updating of the product, may
Water Connec tion.................................. . .......1 6
make modifications witho ut giving prior notice. Start of dishwasher................................ .. ......17
This user manual shall also be got from the
manufacturer or responsible vendor.
Be fore calling for service........................... . .....18
Error codes.................................... . ..............1 9
Technical information.............................. .. .....20
 When using your dishwasher,
follow the precautions listed below:
This appliance is intended to be used in household
and similar applications such as:
-staff kitchen areas in shops, offices and other
working environments;
-farm houses;
-by clients in hotels, motels and other residential type
environments;
-bed and breakfast type environments.
This appliance can be used by children aged from 8
years and above and persons with reduced physical,
sensory or mental capabilities or lack of experience
and knowledge if they have been given supervision
or instruction concerning use of the appliance in a
safe way and understand the hazards involved.
Children shall not play with the appliance. Cleaning
and user maintenance shall not be made by children
without supervision.（For EN60335-1 ）
This appliance is not intended for use by persons
(including children )with reduced physical, sensory
or mental capabilities, or lack of experience and
knowledge ,unless they have been given supervision
or instruction concerning use of the appliance by a
person responsible for their safety.（For IEC60335-1 ）
This appliance is for indoor use only, for household
use only.
To protect against the risk of electrical shock, do not
immerse the unit, cord or plug in water or other liquid.
Please unplug before cleaning and maintenance the
appliance .
Use a soft cloth moisten with mild soap, and then use
a dry cloth to wipe it again.
This appliance must be earthed. In the event of a
malfunction or breakdown, earthing will reduce the risk
of an electric shock by providing a path of least
resistance of electric current. This appliance is equipped
with a cord having an equipment-earthing conductor
and a grounding plug.
The plug must be plugged into an appropriate outlet that
is installed and earthed in accordance with all local
codes and ordinances.
Improper connection of the equipment-earthing
conductor can result in the risk of an electric shock.
Check with a qualified electrician or service
representative if you are in doubt whether the appliance
is properly grounded.
Do not modify the plug provided with the appliance;
If it does not fit the outlet.
Have a proper outlet installed by a qualified electrician.
Do not abuse, sit on, or stand on the door or dish rack of
the dishwasher.
Do not operate your dishwasher unless all enclosure
panels are properly in place.
Open the door very carefully if the dishwasher is
operating, there is a risk of water squirting out.
Do not place any heavy objects on or stand on the door
when it is open. The appliance could tip forward.
When loading items to be washed:
1) Locate sharp items so that they are not likely to
damage the door seal;
2) Warning: Knives and other utensils with sharp points
must be loaded in the basket with their points down or
placed in a horizontal position.
Check that the detergent powder is empty after
completion of the wash cycle.
Do not wash plastic items unless they are marked
dishwasher safe or the equivalent.
For plastic items not so marked, check the manufacturer's
recommendations.
Use only detergent and rinse additives designed for
an automatic dishwasher.
Never use soap, laundry detergent, or hand washing
detergent in your dishwasher.
Children should be supervised to ensure that they do not
play with the appliance.
The door should not be left open, since this could increase
the risk of tripping.
If the supply cord is damaged, it must be replaced by the
manufacturer or its service agent or a similarly qualified
person in order to avoid a hazard.
During installation, the power supply must not be
excessively or dangerously bent or flattened.
Do not tamper with controls.
The appliance is to be connected to the water mains using
new hose sets and that old hose-sets should not be reused.
The maximum number of place settings to be washed
is 14.
The maximum permissible inlet water pressure is 1MPa.
The minimum permissible inlet water pressure is 0.04MPa.
Dispose of the dishwasher packaging material
correctly.
All packaging materials can be recycled.
Plastic parts are marked with the standard
international abbreviations:
PE for polyethylene, e.g. sheet wrapping material
PS for polystyrene, e.g. padding material
POM polyoxymethylene, e.g. plastic clips
PP polypropylene, e.g. Salt filler
ABS Acrylonitrile Butadiene Styrene, e.g. Control
Panel .

Packaging material could be dangerous for children!

For disposing of package and the appliance please
go to a recycling centre. Therefore cut off the power
supply cable and make the door closing device
unusable.
Cardboard packaging is manufactured from recycled
paper and should be disposed in the waste paper
collection for recycling.
By ensuring this product is disposed of correctly, you
will help prevent potential negative consequences
for the environment and human health, which could
otherwise be caused by inappropriate waste handling
of this product.
For more detailed information about recycling of this
product, please contact your local city office and your
household waste disposal service.
DISPOSAL: Do not dispose this product as unsorted
municipal waste. Collection of such waste separately
for special treatment is necessary.
 For detailed operating method read the corresponding content on the instruction manual.

Switch on the appliance Press the On/Off button to switch on the appliance, Open the door.

With each wash cycle. A B C

Fill the detergent dispenser Compartment

For programmes with pre-wash only.
(Follow the user instructions!)

Check the rinse aid level

Electric indicator on control panel (if provided).

(On models with water softener system only.)

Check the regeneration Electric indicator on control panel (if provided).
salt level If there is no salt warning light in the control panel
(for some models), you can estimate when to fill the salt into
the softener by the number of cycles the dishwasher has run.

Scrape off any large amount of leftover food. Soften remnants of burnt food in pans,
Load the baskets then load the baskets. Refer to the dishwasher loading instructions.

Press the Programme Button until the selected programme lights up.
Select a programme ( See the section entitled“Operationg instruction”)

Running the dishwasher Close the door, t urn on the water tap and press the Start/Pause Button. The machine will start working
after about 10 seconds.

Changing the programme 1. A running cycle can only be modified if it has been running for a short time. Otherwise the detergent
may have already been released and the water already drained. If this is the case, the detergent
dispenser must be refilled.
2. Press the Start/Pause button, the machine will be in standby state, press the program
button more than 3 seconds then you can change the program to the desired cycle setting

Add forgotten dishes in the 1.Press the Start/Pause Button to stop the washing.
dishwasher. 2.Open the door a little . O pen th e door carefu lly.
3.After the spray arms stop working, you can open the door Hot steam may escape
completely. when the door is open ed!
4.Add forgotten dishes.
5.Close the door
6.Press the Start/Pause Button, the dishwasher will run
after 10 seconds.

If the appliance is switched If the appliance is switched off during a wash cycle, when switched
off during a wash cycle. on again, please re-select the washing cycle and operate the dishwasher
according to the original Power-on state ).

When the working cycle has finished, the buzzer of the

Switch off the appliance dishwasher will sound 8 times, then stop.
Turn off the appliance using the On/Off Button.

Warning: wait a few minutes (about 15 minutes) before unloading the dishwasher to avoid handling
Turn off the water tap, the dishes and utensils while they are still hot and more susceptible to break.
unload the baskets They will also dry better.Unload the appliance, starting from the lower basket.
3.Operation Instruction
IMPORTANT To get the best performance from your dishwasher, read all operating instructions
before using it for the first time.

Control Panel
18 2 3

4 7 5 6
1 On/Off Button: To turn on/off the power supply. 7 Display screen: to show the reminding time
and the state(running state, delay time etc )
2 Language Button: To Press the button to select Rinse Aid indicator:
the appropriate language.
Indicates when the dispenser needs to be refilled.
3 Program Button : To Press the button to select Add salt indicator:
appropriate Program. Indicates when the dispenser needs to be refilled.
4 Delay Button : To Press the button to delay. Alt functions indicator:
5 Alt Button: Dual zone wash function, press the Child lock indicator:
button to select either upper basket or lower basket
loaded, and the response indicator . Delay hours indicator:
6 Start /Pause button: To start the selected Program indicators:
washing program or pause the washing program
Language indicator:
when the machine is working.
Delay time ,Remain time ,or error codes indicator:

8 Child lock button: press the two buttons for 3 seconds

simultaneously to lock the program or unl oc k .

Dishwasher Features
Front view Back View

1
2
3
8
4
5
6 9
10
7

11 12

1 Top spray arm 4 Inner pipe 7 Dispenser 10 Filter assembly

2 Cutlery rack 5 Lower basket 8 Cup shelf 11 Inlet pipe connector

3 Upper basket 6 Salt container 9 Spray arms 12 Drain pipe

3
Before using your dishwasher for the first time:
A. Set the water softener
B. Add 1.5Kg dishwasher salt and then full fill the salt container with water
C. Fill the rinse aid dispenser
D. Fill in detergent

The water softener must be set manually, using the water hardness dial.
The water softener is designed to remove minerals and salts from the water, which would have
a detrimental or adverse effect on the operation of the appliance.
The higher the content of these minerals and salts, the harder your water is.
The softener should be adjusted according to the hard ness of the water in your area. Your local Water Authority
can advise you on the hardness o f the water in your area.

Adjusting Salt Consumption

The dishwasher is designed to allow for adjustment in the amount of sa lt co nsumed bas ed on the ha rdness of
the water used. This is intended to optimise and customise the level o f salt consumption.

Please follow the steps below for adjustment in salt consumption.

1. Switch on the appliance;
2. Press the Start/Pause button for more than 5 seconds to start the water
softener set model within 60seconds after the appliance was
switched on;
3. Press the Start/Pause button to select the proper set according to
your local environment, the sets will change in the following
sequence: H1->H2->H3->H4->H5->H6;
4. Press the On/Off button or no operation for 5 seconds to end the set up model.

WATER HARDNESS
Salt consumption
Selector Position
dH Clarke mmol/l (gram/cycle)
fH

0~5 0~9 0~6 0~0.94 H1 0

6-11 10-20 7-14 1.0-2.0 H2 9
12-17 21-30 15-21 2.1-3.0 H3 12
18-22 31-40 22-28 3.1-4.0 H4 20
23-34 41-60 29-42 4.1-6.0 H5 30
35-55 61-98 43-69 6.1-9.8 H6 60

°°
1 dH=1.25 ° Clarke=1.78°
fH=0.178mmol/l
DH: German degree
°
fH: French degree
°Clark: British degree

The manufactory setting: H4 (EN 50242)

Contact your local water board for information on the hardness of your water supply.

If your model does not have any water softener, you may skip this section.

WATER SOFTENER
The hardness of the wa ter varies from place to plac e. If hard water is used in the dishwasher, de posits will
form on the dish es and utensils.
The appliance is equipped with a special softener that uses a salt container specifically des igned to eliminate
lime and minera ls from the water.
Always use the salt intended for use with dishwasher.
The salt contain er is located beneath the lower basket and should be fill ed as explained
in t he foll owing:

Attention!
Only use salt spe cif ically desi gne d for t he use i n dishwashers! Every other type of
salt not speci fically de sig ned fo r the u se in a d ishwasher, espe cially table salt, will
damage the w ater sof tener. In case of damages caused by the use of unsuitable
salt the ma nuf act urer does not give any wa rranty nor is liable for any damages caused.
Only fil l wi th salt just b efore starting one of the co mp let e washing p rograms.
This wi ll prevent any g rains of salt or salty wate r, which ma y have been spilled,
remaining on the bottom of the machi ne for any period of time, which may cause
corrosi on.

A After the lower basket has been removed, unscrew and remove the cap from the salt container.
B Place the end of the funnel (supplied) into the hole and introduce about 1.5kg of dishwasher salt.
C Full fill the salt container with water,It is normal for a small amount of water to come out of the
salt container.
D After filling the container , screw the cap tightly back clockwise.
E The salt warning light will stop being after the salt container has been filled with salt.

F Immediately after filling the salt into the salt container, a washing program should be started (We suggest to use a short
program ). Otherwise the filter system, pump or other important parts of the machine may be damaged
by salty water. This is out of warranty.

1. The salt container must only be refilled when the salt warning light in the control panel comes on.
Depending on how well the salt dissolve s, the salt warning light may still be on even though the
salt container is filled.
If there is no salt warning light in the con trol panel (for some Mode ls),you can estimate when to fill
the salt into the softener by the cycles that the dishwasher has run.
2. If there are spills of the salt, a soak or a rapid program should be run to remove the excessive sa lt.
3.If the machine needs to be dumped for the reasons of tra nsit, repair and so on, please use the bibulous cloth or
analog to blot up th e water in the salt containe r, and screw the cap tightly, afterward, transit or repair the machine.
After transiting or repairing the mach ine and c onfirmin g it in order, load the salt into the softener according to the
process of “B. Loading the salt into the Softener”. Otherwise , it c ould be make the big damage to the ma chin e, for
examp le, rustiness, conk and so on. Such problems are out of the guarantee ran ge.

Rinse Aid Dispenser

The rinse aid is released during the final rinse to prevent water from forming droplets on your dishes, which can
leave spots and streaks. It also improves drying by allowing water to roll off the dishes. Your dishwasher is
designed to use liquid rins e aids. The rinse aid dispenser is located inside the door next to the detergent dispenser.
To fill the dispenser, open the cap and pour the rinse aid into the dispenser until the level indicator turns completely
black. The volume of the rinse aid container is about 110ml.

Function of Rinse Aid

Rinse aid is automatically added during the last rinse, ensuring thorough rinsing, and spot and streak free drying.

Attention!
Only use branded rinse aid for dishwasher. Never fill the rinse aid dispenser with any other substances
(e.g. Dishwasher cleaning agent, liquid detergent). This would damage the appliance.
When to Refill the Rinse Aid Dispenser
If there is no rinse-aid warning light in the control panel, you can estimate the amount from the colour
of the optical level indicator " C "located next to the cap. When th e rinse-aid c ontainer is full, the whole
indicator will be dark .As the rinse -aid diminishes, the size of the dark dot decreases. You should never let
the rinse aid leve l fall 1 / 4 full.

As the rinse aid d iminishes, the size o f the black dot

on the rinse aid level indicator changes, as illustra ted below.
Full
3 / 4 full
1 / 2 full
1 / 4 full - Should refill to eliminate spotting
Empty

1 To open the dispenser, turn the cap to the "open" (left) arrow and lift it out.
2 Pour the rinse aid into the dispenser, being careful not to overfill.
3 Replace the cap by inserting it aligned with "open" arrow and turning it to the closed (right) arrow.

Clean up any rinse aid spilled while during filling with an absorbent cloth to avoid excessive foaming
during the next wash. Don't forget to replace the cap before you close dis hwa sher door.

Adjusting Rinse Aid Dispenser

The rinse aid dispenser has six or four settings. Always start with the dispenser
set on "4". If spots and poor drying are a p roblem, increase the amount of rinse
aid dispensed by removing the dispenser lid and rotating the dial to "5". If the
dishes still are not drying properly or are show spots, adjust the dial to the next
higher lever until your dishes are spot-free. The recommended setting is "4".
(Factory value is "4".)

Increase the dose if there are drops of water or lime spots on the dishes after washing.
Reduce it if there are sticky whitis h stains on your dishes or a bluish film on glassware or
knife blades.

Detergents with its chemical ingredients are necessary to remove dirt, c rush dirt and transport it out of the dishwasher.
Most of the commercial quality deterge nts are suitable for this purpose.

Attention!
Proper Use of Detergent
Use only detergent specifically made for the use in dishwashers. Keep your detergent fresh and dry.
Don't put powdered detergent into the dispenser u ntil you're re ady to wash dish es.
Detergents
There are 3 sorts of d etergents
1.With phosphate and with ch lorine
2.With phosphate and without chlorine
3.Without phosphate and without chlorine

Normally new pulverised detergent is with out phosphate. Thus the water softener function of
phosphate is not given. In this case we recommend to fill salt in the salt con taine r even when
the hardness of water is only 6 °dH. If dete rgents witho ut phosphate are used in the case of hard water
often white spots appear on d ishes and glasses. In this case please add more detergent to reach
better results. Detergents without chlorine do only bleach a little. Stron g and coloured spots will not
be removed completely. In this case please choose a program with a higher temperature.

Concentrated Detergent
Based on their chemical composition, deterge nts can be split in two basic types:
conventional, alkaline dete rgents with caus tic comp onents
low alkalin e co ncentrated detergen ts with n atural enzymes

Detergent Tablets
Detergent tablets of diffe rent brands disso lve at different speeds. For this reason some
detergent tablets cannot dissolve and develop the ir full cleaning power during short
programs. There fore please use long programs wh en u sin g deterg ent tablets, to
ensure the complete removal of detergent residua ls.

Detergent Dispenser
The dispenser must be refilled before the start of each wash cycle following the instructions
provided in the wash cycle table . Your dis hwa sher uses less de tergent and rinse aid than
Conventional dis hwa sher. Generally, only one tablespoon of detergent is needed for
a normal wash load. More heavily soiled items need more detergent. Alway s ad d the
detergent just be fore starting the dish was her, otherwise it could get damp and will not
dissolve properly.

Amount of Detergent to Use

Detergent powder
Push latch to open
Detergent tablet

If the lid is closed: press release button. T he lid will sp ring open.
Always add the detergent just before starting each wash cycle.
Only use branded detergent aid for dishwasher.

Dishwasher detergent is corrosive!

Take care to keep it out of reach of children.
 A B
Fill in Detergent
Fill the detergent dispenser with detergent.
The marking indicate s the dosing levels , as
illustrate d on the righ t:
A The place of main wash cycle deterg ent placed.

B The place of pre-wash cycle deterge nt placed.

Plea se o bserve the manufacturers dosing and storage

Recommendations as stated on the detergent pac kaging.

Close the lid and press until it locks in place.

If the dishes are heavily soiled, place an additional

detergent do se in the pre-wash detergent chamber. This detergent will take effect during the pre-wash phas e.

You find information about the amount o f detergent for th e single programme on the last page .
Please aware, tha t according to the level soiling and the specific hardness of water differences are possible.
Please observe th e manufacturer's rec ommendations on the de tergent packaging.
 Consider buying utensils which are identified as dishwasher-proof.
Use a mild detergent that is described as 'kind to dishes'. If necessary, seek further
information from the detergent manufacturers.
For particular items, select a program with as low a temperature as possible.
To prevent damage, do not take gla ss a nd c utlery out of the dishwasher immediately
after the programme h as ended.

Are not suitable Are of limited suitability

Cutlery with wooden, horn china or Some types of glasses can become
mother-of-pearl handles dull after a large number of washes
Plastic items that are not heat resistant
Older cutlery with glued parts that are not Silver and aluminum parts have a
temperature resistant tendency to discolour during washing
Bonded cutlery items or dishes
Pewter or cooper items Glazed patterns may fade if machine
Crystal glass washed frequently
Steel items subject to rusting
Wooden platters
Items made from synthetic fibres

(For best performance of the dishwasher, follow these loading guide lines.
Features and appearance of baskets and cutlery baskets may vary from your model.)

Scrape off any large amounts o f leftover food. Soften remnants of burnt food in pans.
It is not necess ary to rinse the d ishes under running water.
Place objects in the dishwasher in following way:
1.Items such as cups, glasses, pots /pans, etc. are faced downwards.
2.Curved items, or ones with recesses, should be loaded aslant so that water can run off.
3.All utensils are stacked securely and can not tip over.
4.All utensils are placed in the way that the spray arms can rotate freely during washing.

Very small items should not be washed in the dishwasher as they could easily fall out of the basket.

Load hollow items suc h as cup s, glasses, pans etc. With the opening facing downwards so that
water can not collect in the con tainer or a deep b ase.
Dishes and items of cutlery must not lie ins ide one another, or cover each oth er.
To avoid damage to glasse s, th ey must not touc h.
Load large ite ms which are most difficult to clea n into the lower bask et.
The upper basket is designed to ho ld more delicate and lighter dishware such as glasses , coffee
and tea cups
Long bladed knives stored in an upright position are a potential haza rd!
Long and/or sharp items o f cutlery such as carving kniv es must be positioned
horizonta lly in the upper b asket.
Please do not ove rload yo ur dishwasher. This is important for good results and for
reasonab le consumption of energy.

To prevent water dripping from the uppe r basket into the lower basket, we recommend that you
empty the lower basket first and then the upper basket.
The u pper basket is designed to hold more delicate We suggest that you place large items and the most
and lighter dishware such as glasses, coffee and difficult to clea n ite ms are to be placed into the lo wer
tea cups and saucers, as well as plates, small bowls basket: such as pots, pans, lids, se rving dishes and
and shallow pans (as long as they are not too dirty). bowls, as shown in the figure below. It is pre ferable to
Position the dishe s an d co okware so that they will place serving dishes and lids on the side of the rack s
not get moved by the spray of wate r. in order to avoid blocking the ro tation of the top spray
arm.

Please be reminded that:

Pots, serving bowls, etc, must always be placed top down.
Deep pots should be slan ted to allow water to flow out.
The Botto m Basket features fo lding spikes so that larger or more pots and pans can be loaded.

Adjusting the Upper Basket Folding back the cup shelives

The height of the upper basket can be adjusted in order to Fo r better stacking of po ts and pans,
create mo re space for large utensils both for the upper the spikes c an b e folded down as
/lower basket. The height of the upper basket can b e sho w in the picture right.
adjusted by placing the wheels on different height of the
rails. Long items, serving cutlery, salad servers and knives
should be placed on the shelf so that they do not obstruct
the ro tation of the spray arms..

Folding Spikes of Lower Basket

For better stacking of pots and pans,
the spikes can be folded down as
show in the picture right.

Cutlery should be pla ced in the cutlery rack separately

from each other in th e ap propriate positions, and d o
make sure th e utensils do not nest together, this may
cause bad performance.
 ( ) Means: need to fill rinse into the Rinse-Aid Dispenser.

Pre-wash (45 ℃)
Auto Auto sensing wash, lightly, Auto was h
normally or heavily soiled (45-55 ℃)
crockery, with or with out Rinse 5/30g 120~180 0.9~1.3 8.4~16
dried-on food Rinse (65 ℃)
Drying
Pre-wash (50 ℃)
For heaviest soiled crockery, Wash (65 ℃)
Intensive and normally soiled pots、 Rinse 5/30g
pans、dishes etc with dried Rinse 175 1.6 18
(or 3in1)
on soiling. Rinse(65℃)
Drying
Pre-wash(45 ℃)
Normal Wash (55℃)
For normally soiled loads, 5/30 g
such as pots , plates,glasses Rinse (or 3in1)
185 1.3 14
and lightly soiled pans. Rinse (65 ℃)
Drying
This is standard programme,
it is suitable to clean normally Pre-wash
soiled tableware and it is the Wash (45 ℃)
most efficient programme in Rinse(55℃) 5/30g
(or 3in1) 195 0.83 10
terms of its combined energy Drying
and water consumption for
that type of tableware.
Glass Pre-wash
wash(45℃) 5/30g
For lightly so iled cro ckery 115 0.87 14
Rinse (or 3in1 )
and glass. Rinse(60℃)
Drying
For lightly so iled loads that Pre-wash (50℃)
60 min
do not need exce llent dry ing Wash(60℃) 5/30g 60 1.15 10
effic iency. Rinse (60℃)
Drying

Rapid A shorter wash for lightly Wash (40 ℃)

soiled loads that do not Rinse 30g 40 0.6 11.5
need drying. Rinse (45 ℃)

Soak
To rinse dishes that you plan
Pre-wash 8 0.01 4
to wash later that day

*EN 50242 : This programme is the test cycle. The information for comparability test
in accordance with EN 50242, as follows:
Capacity: 14 setting
Position Upper ba sket: upper wheels on rails
Rinse aid setting: 6
Pl:0.49w; Po:0.45 w.

Starting a cycle wash

1 Draw out the lowe r and upper basket, load the dishes and push them back.
It is commended to load the lower basket first, then the uppe r one (see the section entitled
“Loading the Dishwasher”).
2 Pour in the detergent (see the section entitled“Salt, Detergent and Rinse Aid”).
3 Inse rt the plug into the socket. The power supply is 220-240 VAC /50 HZ, the specification
of th e so cket is 10A 250VAC. Make sure that the water supply is turned on to full pressure.
4 Close the door, press the ON/OFF Button, and the d isplay will turn on.
5 Press the program Button , the wash program will be changed as follows direction:
Auto -> Intensive->Normal->ECO->Glass->60 min ->Rapid->Soak ;
If a program is se lected, the response ligh t will light. Then press the Start/Pause button, the
dishwasher begin s to start.
 When you press the Start/Pause button to pause during washing, the running indicator will
stop blinking and the dishwasher will mooing every minute unless you press the
Start/Pause button to start.

Premise:
1 A cycle that is underway can on ly be modified if it has only been running for a short time. Otherwise, the
detergent may have already be en released, a nd the appliance may have already drained the wash water.
If this is the case , the detergent dispenser mu st be refilled (see the section entitled " Loading the
Detergent " ).
2 Press the Start/Pause button , the machine will be in standby state, press the program button more than
3s then you can change the program to the de sired cycle setting (see the section entitled " Starting a wash
cycle. . ." ).

If you open the door during a wash cycle , the machine will pause. The program light will
stop blinking unless you close the door . After you close the door ,the machine will keep
on working after 10 seconds.

A forgotten dish can be added any time before the detergent cup opens.
1 Press the Start/Pause Button to stop the washing. 4 Add forgotten dishes.
2 Open the door a little . 5 Close the door

3 After the spray arms stop working, you can open the door
completely.
6 Press the Start/Pause Button, the dishwasher will run
after 10 seconds.

When the wo rking cycle has finished, then stop. Turn offthe appliance using the ON/OFF button, shut off the
wate r supply and open the do or of the dishwasher. Wait for a fe w minutes before unloading the dishwasher to
avoid handling the dishes and utensils while they are still hot and more susc eptible to breakage. The y will also
dry bette r.

Switch Off the Dishwasher

The program light is on but is not blinking, only in this case the programme has ended.
1.Switch off the dishwasher by pressing the ON/OFF button.
2.Turn off the water tap!

Open the door carefully.

Hot dishes are sensitive to knocks. The dishes should therefore be allowed to cool down around 15 minutes
before removing from the appliance.
Open the dishwasher's door, leave it ajar and wait a few minutes before removing the dishes. In this way they
will be cooler and the drying will be improved.

Unloading the dishwasher

It is normal that the dishwasher is wet inside.
Empty the lower basket first and then the upper one. This will avoid water dripping from the upper Basket onto
the dishes in the lower one.

It is dangerous to open the door when washing,

because the hot water may scald you.
The filter prevents larger remnants of food or other objects from getting inside the pump.
The residues may block the filter, in this case they must be removed.

The filter system consists of a coarse filter,a flat (Main filter)

And a microfilter(Fine filter).

Main filter 1
2 Fo od and soil particles trap ped in this filter are pulverized by a
specia l jet on the lower spray arm and washed down to drain.

1 Coarse filter 2
La rger ite ms, such as p ieces of bones or glass, that could block
the drain are trapped in the coarse filter. To remove the items
caught by the filter, gently squeeze the tap on the top of this
3 filter and lift out.

Fine filter 3
This filter holds soil and food residues in the sump area a nd
preve nts it from being redeposit on the dishes during wa sh cycle.

Filter assembly
The filter efficiently re mo ves food particle s from the wash water, allowing it to be rec ycled during the cycle.
For best performance and results, the filter must be cleaned re gularly. For this reason, it is a goo d idea to
remove the larger food particles trapp ed in the filter after e ach was h cycle by rinsing the semicircular filter and
cup under runnin g water. To remove the filter device, pull the cup handle in the upward d irection.

The d ishwasher must never b e used without the filters.

Improper replacement of the filter may reduce the performance level of the appliance
and damage dishes and utensils.

1
Step 1：Turn the filter in anti-clockwise direction,

2
Step 2：lift the filter assy up

When following this procedure from step1 to step 2, the filter system will be removed;
when following it from Step 2 to Step 1, the filter system will be installed.
Remarks:
- Inspect the filters for blo cking a fter e very time the dishwa sher has been used.
- By unscrewing the coarse filter, you can remove the filter system. Re move any foo d remna nts and
clean the filters under running water.

The entire filter assembly should be cleaned once a week.

Cleaning the Filter

To clean the coarse filter and the fine filter, use a c leaning b rush. Reassemb le the filter p arts as shown in the figures
on the last page and reinsert the entire assembly in the dis hwa sher, positio ning it in its seat and pressing downwards.

When cleaning the filters, don't knock on them. Otherwise, the filters could be
contorted and the performance of the dishwasher could be decreased.

The control panel can be cleaned by using a lightly dampened cloth.

After cleaning, make sure to dry it thoroughly.
For the exterior, use a good appliance polish wax.
Never use sharp objects, scouring pads or harsh cleaners on any part of the dishwasher.

Cleaning The Door

To clean the e dge around the door, you should use only a soft warm, damp cloth.
To avoid pene tration o f wa ter into the door lock and electrical components, do not
use a spray cleaner of any kind.

Never use a spray cleaner to clean the door panel as it may damage the door loc k
and electrical components.
Abrasive agents or some paper towels shou ld not be used becau se of the risk of
scratching or leaving spots on the stainless steel surface.

Protect Against Freezing

please take frost protection measures on the dishwasher in winter. Every time a fter washing cycles,
please operate as follows：

1.Cut off the electrical power to the dishwasher.

2.Turn off the water supply and disconnect the water inlet pipe from the water valve.
3.Drain the water from the inlet pipe an d water valve. (Use a pan to gather th e water)
4.Reconnect the water inlet pipe to the water valve.
5.Remove the filter at the bottom of the tub and use a sponge to soak up water in the sump.

If your dishwasher cannot work because of the ice,

please contact professional service persons.

Cleaning the Spray Arms

It is necessary to clean the spra y arms re gularly fo r hard
wate r che micals will clog the sp ray arm jets a nd bearings.
To remove the up per spray arm, hold the nut, rotate the arm
clockwise to remove it.

To remove th e lower spray arm, pull out the spray arm u pwa rd.

Wash the arms in soapy and warm water and use a soft brush to
clean the jets. Replace them after rinsing them thoroughly.
 After Every Wash When not in Use for a LongTime
After every wash, turn off the water supply to the It is recommend that you run a was h cy cle with the
appliance and leave the door slightly open so that dishwasher empty an d the n remove the plug from the
moisture and odours are not trapped inside. socket, turn off the wa ter supply and leave the door of
the appliance slightly open. This will help the d oor
Remove the Plug seals to last longer and prevent odours from forming
within the appliance.
Before cleaning or performing maintenance, always
remove the plug from the socket. Moving the Appliance
No Solvents or Abrasive Cleaning If the appliance must be moved, try to keep it in the
vertical position. If absolutely necessary, it can be
To cle an the e xterior a nd rubber p arts of the dishwasher, positioned on its back.
do not use solvents or abrasive cle aning products.
Only use a clo th with warm so apy water. Seals
To remove spots o r stains from the surface of the One of the factors that cause odours to form in the
interior, use a cloth da mpened with water a n a little dishwasher is food that remains trapped in the seals.
vinegar, o r a cleaning pro duct mad e specifically for Periodic cleaning with a damp sponge will prevent this
dishwashers. from occurring.

Position the appliance in the desired location. The back should rest against the wall behind it, and the sides,
along the adjacent cabinets or walls. T he dishwasher is equipped with water supply and drain hoses th at can
be positioned either to the righ t or the left sides to facilitate proper installation.

Once the appliance is positioned for levelling, the height of the dishwashe r
may be altered via adjustment of the screwing level of the feet. In any case,
the applia nce should not be inclined more than 2 .

For personal safety:

Do not use an extension cord or an adapter plug
with this appliance.
Do not, under any circumstances, cut or remove the
earthing
Connection from the power cord.

Please look at th e rating label to know the rating voltage and connect the dishwasher to the app ropriate power supply.
Use the required fuse 10 amp, time delay fuse or circuit breaker recommend ed and provide separate circuit serving
only this appliance.

Ensure the voltage and frequency of the power being correspond s to

those on the rating plate. Only in sert the plug into an electrica l socke t which is earthed
prop erly. If the electrical socket to which the appliance must be connected is not
appropriate for the plug , replace the socket, rather than using a a daptors or the like as
they could cause ove rheating an d burns.
 Conne ct th e co ld water supp ly hose to a threaded 3/4(inch) connector and make sure
that it is fastened tig htly in place.
If the water pipes are new or have not been used for an extended pe riod of time, let the
water run to make sure that the water is clear. This precaution is needed to avoid the
risk of the wate r inlet to be blocked and d amage th e appliance.

Please close the hydrant after using.

Insert the drain h ose into a drain pipe with a minimum diameter of 40mm, or let it run into the sink, making sure to
avoid bending or crimping it. The top of the ho se must be less than 1000mm.

Front Counter

NOTE
The top of the hose
must be less than A
1000mm.

Drain pipe
B

φ 40mm
How to Drain Excess Water From Hoses
If the sink is 1000 higher from the floor, the excess water in hoses cann ot be drained dire ctly
into the sink. It will be necessary to drain excess water from hoses into a bo wl o r suitable
container that is held outside and lower th an the sink.

Water Outlet
Connect the water drain hose. The drain hose mu st be correctly fitted to avoid water leaks.
Ensure that the water dra in hose is no t kin ked or squashed.

Extension Hose
If you need a drain hose extension, make sure to use a similar drain hose.
It must be no longer than 4 metres; otherwise the cleaning effect of the dishwasher could be reduced .

Syphon Connection
The waste connection must be at a he ight less than 10 0 cm (maximum) from the bottom of the dish.
The water drain hose sho uld be fixed .

The following things should be checked before starting the dishwasher.

1 The dishwasher is level and fixed properly
2 The inlet valve is open
3 There is a leakage at the connections of the conducts
4 The wires are tightly connected
5 The power is switched on
6 The inlet and drain hoses are knotted
7 All packing materials and printings should be taken out from the dishwasher

After installation, please make sure to keep this manual.

The content of this manual is very helpful to the users.
Fuse blown, or the Replace fuse or reset circuit breaker. Remove any other
circuit breaker acted appliances sharing the same circuit with the dishwasher
Power supply is not Make sure the dishwasher is turned on and the door is
turned on closed securely.
Make sure the power cord is properly plugged into the
wall socket.

Water pressure is low Check that the water supply is connected properly and
the water is turned on.
Door of dishwasher
not properly closed. Make sure to close the door properly and latch it.

Kink in drain hose Check drain hose.

Filter clogged Check coarse the filter

(see section titled " Cleaning The Filter ")

Kitchen sink clogged Check the kitchen sink to make sure it is draining well.
If the problem is the kitchen sink not draining ,you may
need a plumber rather than a serviceman for dishwashers.
Use only the special dishwasher detergent to avoid suds.
Improper detergent If this occurs, open the dishwasher and let suds evaporate.
Add 1 gallon of cold water to the tub. Close and latch the
dishwasher, then select any cycle. Dishwasher will drain
out the water at the first step.Open the door after draining
is stop and check if the suds is disappeared.
Repeat if necessary.
Spilled rinse-aid Always wipe up rinse-aid spills immediately.

Detergent with Make sure that the detergent is the one without
colourant was used colourant.
Hard water minerals To clean the interior, use a damp sponge with
dishwasher detergent and wear rubber gloves.
Never use any other cleaner than dishwasher
detergent for the risk of foaming or suds.
The affected items are
not corrosion resistant.
A programme was not Always run the quick wash programme .
run after dishwasher without any crockery in the dishwasher and
salt was added. without selecting the Turbo function (if present),
Traces of salt have after adding dishwasher salt.
gotten into the wash cycle.

The lid of the softer Check the lip .Ensure the fix is fine.
is loose
A spray arm is Interrupt the programme, and rearrange the items
knocking against which are obstructing the spray arm.
an item in a basket
Items of crockery Interrupt the programme,
are loose in the and rearrange the items of crockery.
wash cabinet

This may be caused This has no influence on the dishwasher function.

by on-site installation if in doubt, contact a suitably qualified plumber.
or the cross-section of
the piping.
 The dishes were not See notes in " Loading the Dishwasher Baskets ".
loaded correctly.
The programme was Select a more intensive programme.
not powerful enough. See" Wash Cycle Table ".
Not enough detergent Use more detergent, or change your detergent.
was dispensed.
Items are blocking Rearrange the items so that the spray can rotate freely.
the path of spray arms.
The filter combination Clean and/or fit the filter combination correctly.
in the base of wash Clean the spray arm jets. See "Cleaning the Spray
cabinet is not clean or Arms".
is not correctly fitted.
This may cause
the spray arm jets
to get blocked.
Combination of soft Use less detergent if you have soft water and select
water and too much a shortest cycle to wash the glassware and to get
detergent. them clean.
Aluminum utensils Use a mild abrasive cleaner to eliminate those marks.
have rubbed against
dishes.
Dishes block Re-loading the dishes properly.
detergent cups.

Improper loading Load the dishwasher as suggested in the directions.

Too little rinse-aid Increase the amount of rinse-aid/refill the rinse-aid

dispenser.
Dishes are removed Do not empty your dishwasher immediately after
too soon washing. Open the door slightly so that the steam can
escape. Begin unloading the dishwasher only once t
he dishes are barely warm to the touch. Empty the low
basket first. This prevents water form dropping off
dishes in the upper basket.
Wrong program In short program the washing temperature is lower.
has been selected This also lowers cleaning performance. Choose
a program with a long washing time.
Use of cutlery with Water drainage is more difficult with these items.
a low-quality coating Cutlery or dishes of this type are not suitable for
washing in the dishwasher.

When some malfunctions come on, the appliance will display error codes to warn you:

Faucets is not opened, or water intake is

E1 Longer inlet time. restricted,or water pressure is too low.

E4 Overflow. Some element of dishwasher leaks .

E8 Failure of orientation of distributary valve. Open circuit or break of distributary valve.

E9 Keep pressing a button more than 30 seconds. Water or something on the button.
 If overflow occurs, turn off the main water supply before calling a service.
If there is water in the base pan because of an overfill or small leak,
the water should be removed before restarting the dishwasher.

Height : 845mm
Width : 598 mm
Depth : 600mm (with the door closed)
Water pressure: 0.04-1.0MPa
Power supply: see rating label
Capacity: 14 place settings
Sheet of household dishwasher according to EU Directives 1016/2010 & 1059/2010:

Manufacturer BRANDT

Type / De scription DFH14102W

Standard place settings 14

Energy efficiency class A+++

Annu al energy consumption 237 kWh

Energy consumption of the standa rd cleaning cycle 0.83 kWh

Power co nsumption of off-mode 0.45 W

Power co nsumption of left-on mod e 0.49 W

Annu al water consumption 2800 liter

Drying efficiency class A

Standard cleaning cycle ECO 45℃
Program duration of the standard cleaning cycle 195 min

Noise level 42 dB(A) re 1 pW

Mounting Free standing

Could be built-in Yes

Height 84.5 cm

Width 59.8 cm
Depth (with connectors) 60 cm
Power co nsumption 1850 W

Rated voltage / frequency 230 V~ 50 Hz

Water pressure (flow pressure) 0.4-10 bar = 0.04-1 MPa

NOTE：

A + + + (h ighest efficiency) to D (lowest efficiency)

Energy co nsumption “23 7” k Wh per year, based on 2 80 standard cleaning cyc les u sin g cold water fill and
the consumption of the low power mod es. Actual energy consumption will depend on how the appliance is used.
Water consumption “2800”litres per year, ba sed on 280 s tandard clea ning cycles. Actual water consumption
will depen d o n how the ap pliance is us ed.
A (highest efficiency) to G (lowest efficiency)
This prog ram is suitable for cleaning s oiled normally soiled tableware and that it is the
most effic ient programme in terms of its combined energy a nd wate r consumption for
that type of tableware .
The device meets the Euro pean standards and the directives in the current version at delivery:
- LVD 2006/95/EC
- EMC2004/1 08/EC
- ErP 2009/12 5/EC
The abov e values have been measured in accordance with stan dard s under spe cified op erating conditions.
Results may vary greatly according to quantity and pollution of the dishes, water hardness,
amount o f detergent, etc.
The manual is based on the European Union's stan dards and ru les.
Cutlery basket could be have 5 positions:
Mode 1

Position one: lift the left basket up, both left and right
baskets are sideling.

Mod e 2

Position two: adjust the left basket to lower position, left

basket is flat and right basket is sid eling.

Mod e 3

Position three: lift the right basket up, both left and right
baskets are flat.

Mode 4

Position Four: Move the right basket from right to left, two
basket are overlapping.

Mode 5

Position Five : Remove the right basket from the tray,

only has the left basket.