94160
Pressure Relief Vent
94160 Pressure Relief Vent
The Shand & Jurs 94160 Pressure Relief Vent provides
pressure relief for storage tanks and low pressure
vessels. Utilizing a flange mounted design, this
economical vent provides maximum flow capacity
and high efficiency.
The improved vent uses a reduced number of
standard components thus minimizing maintenance
and replacement costs.
Standard materials of construction include aluminum,
cast iron, steel and 316 stainless steel. This selection of
materials is suitable for applications in corrosive and
toxic product environments.
To ensure alignment and seating, the pressure pallet
used is both peripheral and center stem guided. For
added reliability and extended service, the diaphragm
is “cushion seated” and constructed of FEP Teflon,
contributing to high resistance to adhesion of ice and
gum formation. Seat rings are field replaceable. Features
For additional protection, a weatherhood and a • Designed for high efficiency &
coarse mesh screen surrounding the entire valve
prevent foreign matter from entering the valve. economy
A standard flanged base for sizes 2” thru 24” will fit • Provides maximum flow capacity
150 lb. ANSI FF/RF Flanges. Flanged base materials
are aluminum, cast iron, cast steel, ductile iron and
stainless steel. RF Flange is not available in aluminum. • R e d u c e s m a i n t e n a n c e a n d
replacement costs
Expanda-Seal
Shand & Jurs “Expanda-Seal” option is available on • Suitable for corrosive and toxic
all pressure pallet assemblies. This feature significantly
reduces leakage. The ballooning effect of the Teflon
applications
diaphragm effectively seals the valve.
The “Expanda-Seal” feature ensures less than .5 SCFH • Standard flange base for 2”, 3”, 4”,
of air at 95% of the set point. 6”, 8”, 10”, 12”, 16”, 20” and 24” to
fit 150 lb. ANSI flanges
Pressure Below Set Point Approaching Set Point Set Point Exceeded
• “All Weather” Teflon coating
available
5911 Butterfield Road Hillside, IL 60162 • tel: (708) 236-6000 • fax: (708) 236-6006
Rev: 94160-3B
sales@[Link] • [Link] • ISO 9001: 2008 Certified
1
94160
Pressure Relief Vent
Specifications
Sizes: Temperature Range:
2”, 3”, 4”, 6”, 8”, 10”, 12”, 16”, 20” and 24” Body and Seal Options for Process Temperature
(other sizes available upon request) Ranges of -50oF to 500oF
Flange Connection: Service and Body Material*:
Matches valve size 150 lb. ANSI, API, EN1092-1 or JIS Normal: Aluminum
10K. Severe: Cast Iron, Ductile Iron, Steel,
316 Stainless Steel
Standard Setting (Min.): Seats**: Normal Service, Aluminum for all sizes,
0.5 oz/in2 (0.865” W.C.) (See Standard Setting Table) Severe Service 316 Stainless Steel** for
all sizes
Maximum Setting: * Optional materials of construction available on request.
** Teflon seats available for 3”, 4” and 6” sizes
16 oz/in2 (Without modification) NOTE: 16”-24” sizes not available in Cast or Ductile Iron
(higher settings available with modification)
Standard Materials of Construction
Pallet & Pallet Pallet Side Stem
Service Body Seat Diaphragm Screen Hardware
Retainer Stem Guides Guides
Norm. Alum. Alum. Alum. Alum. Alum.* 316 SS GS Teflon GS Stainless Steel
Severe Iron CI/DI 316 SS 316 SS 316 SS 316 SS GS Teflon 304 SS 316 SS
Severe Steel CS 316 SS 316 SS 316 SS 316 SS GS Teflon 304 SS Stainless Steel
Severe 316 SS 316 SS 316 SS 316 SS 316 SS 316 SS 316 SS 316 SS 316 SS 316 SS
* 316 SS pallet stem used in place of aluminum for elevated settings CS = Cast Steel GS = Galvanized Steel
HOODS: 2” -10” Sizes - 18-8 Stainless Steel or 316 Stainless Steel CI = Cast Iron
12” -24” Sizes - Aluminum, Steel, or 316 Stainless Steel DI = Ductile Iron
16”, 20” and 24” Sizes
All designs subject to change. Certified dimensions and specifications available upon request.
5911 Butterfield Road Hillside, IL 60162 • tel: (708) 236-6000 • fax: (708) 236-6006
Rev: 94160-3B
sales@[Link] • [Link] • ISO 9001: 2008 Certified
2
94160
Pressure Relief Vent
Dimensions
Vent Size Dimensions in Inches “N” No. Net Weight - Lbs. Item No. Description
(In.) “C” “F” of Bolts* Aluminum Steel 1 Stem Guide
2” 12 7/8 8 1/2 4 4 10 2 Pallet Guides
3” 12 7/8 7 3/4 4 5 12 3 Hood
4” 13 5/8 7 3/4 8 7 16 4 Screen
6” 16 10 1/4 8 10 22 5 Stem
8” 18 5/8 14 8 13 34 6 Loading Weight
10” 18 5/8 16 12 19 48 7 Pallet
12” 25 1/2 16 12 27 72 8 Seat
16” 46 1/4 28 16 48 128 9 Body Flange
20” 46 1/4 28 20 75 180 10 Retaining Plate
24” 46 1/4 28 20 108 245 12 Diaphragm
*ANSI Sizes Shown ~ Misc. Nuts/Washers
All designs subject to change. Certified dimensions and specifications available upon request.
5911 Butterfield Road Hillside, IL 60162 • tel: (708) 236-6000 • fax: (708) 236-6006
Rev: 94160-3B
sales@[Link] • [Link] • ISO 9001: 2008 Certified
3
94160
Pressure Relief Vent
94160 Ordering Guide
Model Number Selection
The model number will consist of a base number 94160 followed by 8 digit numbers. These digits will represent
6 option tables.
94160 - AB - CD - EF - GH
Ordering Information
Specify:
1. Model 94160 Pressure Relief Vent
2. Size and Body Material
3. Pressure Set Point
4. Flange Type
5. Hood Material
6. To Specify CE for Ordinary EU Locations use 94160C AB CD EF GH
7. To Specify ATEX Certification for Group IIB, IIA EU Locations use 94160A AB CD EF GH.
ATEX Certification includes CE Mark.
Table AB - Size & Body Material
Option AB Size Body Material Option AB Size Body Material
10 2” Aluminum 55 8” 316 Stainless Steel
40 2” Cast Steel 16 10” Aluminum
50 2” 316 Stainless Steel 36, 66 10” Cast Iron , Ductile Iron
12 3” Aluminum 46 10” Cast Steel
32, 62 3” Cast Iron , Ductile Iron 56 10” 316 Stainless Steel
42 3” Cast Steel 17 12” Aluminum
52 3” 316 Stainless Steel 37, 67 12” Cast Iron , Ductile Iron
13 4” Aluminum 47 12” Cast Steel
33, 63 4” Cast Iron , Ductile Iron 57 12” 316 Stainless Steel
43 4” Cast Steel 18 16” Aluminum
53 4” 316 Stainless Steel 48 16” Cast Steel
14 6” Aluminum 58 16” 316 Stainless Steel
34, 64 6” Cast Iron , Ductile Iron 19 20” Aluminum
44 6” Cast Steel 49 20” Cast Steel
54 6” 316 Stainless Steel 59 20” 316 Stainless Steel
15 8” Aluminum 11 24” Aluminum
35, 65 8” Cast Iron , Ductile Iron 41 24” Cast Steel
45 8” Cast Steel 51 24” 316 Stainless Steel
5911 Butterfield Road Hillside, IL 60162 • tel: (708) 236-6000 • fax: (708) 236-6006
Rev: 94160-3B
sales@[Link] • [Link] • ISO 9001: 2008 Certified
4
94160
Pressure Relief Vent
Table C - Seal Type and Softgoods Table D - Pressure Range &
Option C Description Load Weight Material
0 Normal FEP / N8090 Option D Description Material
1 Expanda-Seal FEP / N8090 1 *Standard Setting Lead
2 Normal FEP (All) 2 Over 0.5 to 5 oz/in 2
Lead
3 Expanda-Seal FEP (All) 3 Over 5 oz/in2 Lead
4 Normal Viton 4 *Standard Setting 316 SS
5 Expanda-Seal Viton 5 Over 0.5 to 5 oz/in 2
316 SS
6 Normal PTFE 6 Over 5 oz/in 2
316 SS
8 Normal Buna-N * Standard Setting:
Standard Seal AL/SS 2’’-12’’: 0.5 oz/in2
9 Expanda-Seal Buna-N Standard Seal AL 16’’: 0.65 oz/in2 ; 20’’, 24’’: 0.5 oz/in2
Standard Seal SS 16’’: 1.2 oz/in2; 20’’, 24’’ 1.0 oz/in2
Expanda Seal AL/SS 2” - 12”: 1.5 oz/in2
Expanda Seal AL 16”, 20”: 1.0 oz/in2; 24” 1.3 oz/in2
Table EF - Flange Type Expanda Seal SS 16”, 20”: 1.3 oz/in2; 24” 1.5 oz/in2
Option EF Description
00 ANSI 125/150lb. FF Table G - Seat & Pallet Material
10 ANSI 125/150lb. RF* Option G Seat Pallet
01 EN1092-1 PN16 FF 0 Standard* Standard*
11 EN1092-1 PN16 RF* +1 Teflon Standard*
02 JIS 10K FF 2 Aluminum Standard*
12 JIS 10K RF* 4 Stainless Steel Standard*
03 API 650 (20 & 24” Only) 5 Teflon Coated SS Standard*
* RF not available in Aluminum
A Standard* 316 Stainless Steel
Table H - Hood Material & Trim +B Teflon 316 Stainless Steel
Option H Description Trim C Aluminum 316 Stainless Steel
1 Aluminum Hood Standard E Stainless Steel 316 Stainless Steel
2 316 Stainless Steel Hood Standard
F Teflon Coated SS 316 Stainless Steel
3 Steel Hood Standard
NOTE: 16” -24” Sizes have Integral Seats. Options 1-5, B-F not applicable for 16”
4 18-8 Stainless Steel Hood Standard - 24” sizes. CS bases are constructed with SS seat overlay as standard.
* Please see Standard Materials of construction
5 Aluminum Hood 316 Stainless Steel + These Options Not Available with ATEX Models.
6 316 Stainless Steel Hood 316 Stainless Steel For ATEX Certified Valve specify H5, H6, or H8
7 Steel Hood 316 Stainless Steel
8 18-8 Stainless Steel Hood 316 Stainless Steel
Trim Includes: Stem, Stem Guides, Side Guides, Nuts, Bolts, and Screen
5911 Butterfield Road Hillside, IL 60162 • tel: (708) 236-6000 • fax: (708) 236-6006
Rev: 94160-3B
sales@[Link] • [Link] • ISO 9001: 2008 Certified
