Scribd
Upload
429 views2 pages

Electronic Unit Injector - Remove: Disassembly and Assembly

The document provides instructions for removing an electronic unit injector from a 3516B Marine Engine. It lists the required tools, and gives a step-by-step process which includes removing bolts and clamps, disconnecting a harness, and using a pry bar to remove the electronic unit injector.

Uploaded by

sxturbo
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
429 views2 pages

Electronic Unit Injector - Remove: Disassembly and Assembly

The document provides instructions for removing an electronic unit injector from a 3516B Marine Engine. It lists the required tools, and gives a step-by-step process which includes removing bolts and clamps, disconnecting a harness, and using a pry bar to remove the electronic unit injector.

Uploaded by

sxturbo
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

3516B Marine Engine S2X00001-UP(SEBP3924 - 40) - Documentation Page 1 of 2

Shutdown SIS

Previous Screen

Product: MARINE ENGINE


Model: 3516B MARINE ENGINE S2X00519
Configuration: 3516B Marine Engine S2X00001-UP

Disassembly and Assembly


3500B Engines
Media Number -UENR0181-03 Publication Date -01/03/2014 Date Updated -11/03/2014

i02415328

Electronic Unit Injector - Remove


SMCS - 1290-011

Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 5F-4764 Pry Bar 1

Start By:

A. Remove the rocker shaft assembly and the pushrods. Refer to Disassembly and Assembly,
"Rocker Shaft Assembly and Push Rods - Remove".

NOTICE

Keep all parts clean from contaminants.

Contaminants may cause rapid wear and shortened component life.

https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis... 18/06/2020
3516B Marine Engine S2X00001-UP(SEBP3924 - 40) - Documentation Page 2 of 2

Illustration 1 g00903832

1. Remove bolt (1) and the clamp.

2. Remove bolt (2) and the clamp.

3. Disconnect harness assembly (3) .

Illustration 2 g00903932

4. Use Tooling (A) to remove electronic unit injector (4) .

Copyright 1993 - 2020 Caterpillar Inc. Thu Jun 18 16:58:09 UTC+0100 2020
All Rights Reserved.
Private Network For SIS Licensees.

https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis... 18/06/2020

You might also like