Scribd
Upload
116 views9 pages

P&G H-Frame Beam-to-Beam Connection

This document summarizes the design of a steel structure project. It includes the project name and number, materials used (A992 steel), and design code (AISC 360-16). Beam and column sections, connections, loads, and stress checks are defined. The design meets all code requirements for member stresses, plate strains, bolt capacities, and weld strengths.

Uploaded by

Darwin Fabon
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
116 views9 pages

P&G H-Frame Beam-to-Beam Connection

This document summarizes the design of a steel structure project. It includes the project name and number, materials used (A992 steel), and design code (AISC 360-16). Beam and column sections, connections, loads, and stress checks are defined. The design meets all code requirements for member stresses, plate strains, bolt capacities, and weld strengths.

Uploaded by

Darwin Fabon
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

Project:

Project no:
Author:

Project data
Project name
Project number
Author
Description
Date 12/10/2020
Design code AISC 360-16

Material
Steel A992Fy50
Project:
Project no:
Author:

Project item Con 46

Design
Name Con 46
Description
Analysis Stress, strain/ loads in equilibrium
Design code AISC - LRFD

Beams and columns


β– γ- α- Offset Offset Offset
Forces
Name Cross-section Direction Pitch Rotation ex ey ez
in
[°] [°] [°] [mm] [mm] [mm]
33 TEEM - 1 - TEEM -
-90.0 0.0 0.0 0 0 0 Position
251x100x5x5 251x100x5x5(Iwn251x(100/100))
45 TEEM - 1 - TEEM -
0.0 0.0 0.0 0 0 0 Position
251x100x5x5 251x100x5x5(Iwn251x(100/100))
Project:
Project no:
Author:

Cross-sections
Name Material
1 - TEEM -
A992Fy50
251x100x5x5(Iwn251x(100/100))
2 - L3X3X1/4 A992Fy50
Project:
Project no:
Author:

Cross-sections
Name Material Drawing

1 - TEEM -
A992Fy50
251x100x5x5(Iwn251x(100/100))

2 - L3X3X1/4 A992Fy50

Bolts
Diameter fu Gross area
Name Bolt assembly
[mm] [MPa] [mm2]
1/2 A307 1/2 A307 13 414.0 127

Load effects (forces in equilibrium)


N Vy Vz Mx My Mz
Name Member
[kN] [kN] [kN] [kNm] [kNm] [kNm]
DStlS1 33 TEEM - 251x100x5x5 0.0 0.0 0.2 0.0 -0.4 0.0
33 TEEM - 251x100x5x5 0.0 0.0 0.2 0.0 0.4 0.0
45 TEEM - 251x100x5x5 0.0 0.0 -0.4 0.0 0.0 0.0
DStlS2 33 TEEM - 251x100x5x5 -0.1 0.0 8.1 0.0 -10.2 0.0
33 TEEM - 251x100x5x5 0.1 0.0 8.2 0.0 10.2 0.0
45 TEEM - 251x100x5x5 0.0 0.0 -16.3 0.0 0.0 0.0
DStlD1 33 TEEM - 251x100x5x5 0.0 0.0 0.1 0.0 -0.3 0.0
33 TEEM - 251x100x5x5 0.0 0.0 0.1 0.0 0.3 0.0
45 TEEM - 251x100x5x5 0.0 0.0 -0.3 0.0 0.0 0.0
DStlD2 33 TEEM - 251x100x5x5 -0.1 0.0 5.1 0.0 -6.5 0.0
33 TEEM - 251x100x5x5 0.1 0.0 5.2 0.0 6.5 0.0
45 TEEM - 251x100x5x5 0.0 0.0 -10.3 0.0 0.0 0.0
Project:
Project no:
Author:

Check

Summary
Name Value Check status
Analysis 100.0% OK
Plates 0.0 < 5% OK
Bolts 16.4 < 100% OK
Welds 6.9 < 100% OK
Buckling Not calculated

Plates
Fy Thickness σEd εPl
Name Loads Check status
[MPa] [mm] [MPa] [%]
33 TEEM - 251x100x5x5-tfl 1 344.7 5.0 DStlS2 59.6 0.0 OK
33 TEEM - 251x100x5x5-bfl 1 344.7 5.0 DStlS2 61.0 0.0 OK
33 TEEM - 251x100x5x5-w 1 344.7 5.0 DStlS2 73.6 0.0 OK
45 TEEM - 251x100x5x5-tfl 1 344.7 5.0 DStlS2 44.7 0.0 OK
45 TEEM - 251x100x5x5-bfl 1 344.7 5.0 DStlS2 44.7 0.0 OK
45 TEEM - 251x100x5x5-w 1 344.7 5.0 DStlS2 74.9 0.0 OK
CLEAT1 a-bfl 1 344.7 6.4 DStlS2 49.8 0.0 OK
CLEAT1 a-w 1 344.7 6.4 DStlS2 39.5 0.0 OK
CLEAT1 b-bfl 1 344.7 6.4 DStlS2 49.9 0.0 OK
CLEAT1 b-w 1 344.7 6.4 DStlS2 39.7 0.0 OK
STIFF1 344.7 6.0 DStlS2 9.3 0.0 OK

Design data

fy εlim
Material
[MPa] [%]
A992Fy50 344.7 5.0

Symbol explanation
εPl Plastic strain
σEd Eq. stress
fy Yield strength
εlim Limit of plastic strain
Project:
Project no:
Author:

Overall check, DStlS2

Strain check, DStlS2


Project:
Project no:
Author:

Equivalent stress, DStlS2

Bolts
Ft V ϕRn,bearing Utt Uts Utts
Shape Item Grade Loads Status
[kN] [kN] [kN] [%] [%] [%]
B1 1/2 A307 - 1 DStlS2 0.8 2.1 51.2 2.6 12.1 - OK

B2 1/2 A307 - 1 DStlS2 0.4 2.1 51.2 1.5 12.1 - OK

B3 1/2 A307 - 1 DStlS2 1.7 2.9 51.2 5.7 16.2 - OK

B4 1/2 A307 - 1 DStlS2 0.4 2.9 51.2 1.5 16.4 - OK

B5 1/2 A307 - 1 DStlS2 0.3 2.0 51.2 0.9 11.6 - OK

B6 1/2 A307 - 1 DStlS2 0.2 2.0 51.2 0.5 11.5 - OK

B7 1/2 A307 - 1 DStlS2 0.4 2.1 51.2 1.3 11.8 - OK

B8 1/2 A307 - 1 DStlS2 0.1 2.1 51.2 0.3 11.7 - OK

B9 1/2 A307 - 1 DStlS2 0.3 2.0 51.2 0.9 11.6 - OK

B10 1/2 A307 - 1 DStlS2 0.2 2.0 51.2 0.5 11.5 - OK

B11 1/2 A307 - 1 DStlS2 0.4 2.1 51.2 1.3 11.8 - OK

B12 1/2 A307 - 1 DStlS2 0.1 2.1 51.2 0.3 11.7 - OK

Design data
ϕRn,tension ϕRn,shear
Grade
[kN] [kN]
1/2 A307 - 1 29.5 17.7
Project:
Project no:
Author:

Symbol explanation
Ft Tension force
V Resultant of shear forces Vy, Vz in bolt
ϕRn,bearing Bolt bearing resistance
Utt Utilization in tension
Uts Utilization in shear
Utts Utilization in tension and shear
ϕRn,tension Bolt tension resistance AISC 360-16 J3.6
ϕRn,shear Bolt shear resistance AISC 360-16 – J3.8

Welds
Th Ls L Lc Fn ϕRn Ut
Item Edge Xu Status
[mm] [mm] [mm] [mm] [kN] [kN] [%]
33 TEEM - 251x100x5x5-tfl 1 STIFF1 E60xx ◢2.5◣ ◢3.5◣ 47 24 0.8 11.6 6.9 OK
E60xx ◢2.5◣ ◢3.5◣ 47 24 0.8 11.6 6.9 OK
33 TEEM - 251x100x5x5-w 1 STIFF1 E60xx ◢2.5◣ ◢3.5◣ 241 30 0.5 20.6 2.5 OK
E60xx ◢2.5◣ ◢3.5◣ 241 30 0.5 20.7 2.7 OK
33 TEEM - 251x100x5x5-bfl 1 STIFF1 E60xx ◢2.5◣ ◢3.5◣ 47 24 0.8 15.0 5.4 OK
E60xx ◢2.5◣ ◢3.5◣ 47 24 0.8 15.0 5.3 OK

Symbol explanation
Th Throat thickness of weld
Ls Leg size of weld
L Length of weld
Lc Length of weld critical element
Fn Force in weld critical element
ϕRn Weld resistance AISC 360-16 J2.4
Ut Utilization

Buckling
Buckling analysis was not calculated.

Code settings
Item Value Unit Reference
Friction coefficient - concrete 0.40 - ACI 349 – B.6.1.4
Friction coefficient in slip-resistance 0.30 - AISC 360-16 – J3.8
Limit plastic strain 0.05 -
Weld stress evaluation Plastic redistribution
Detailing No
Distance between bolts [d] 2.66 - AISC 360-16 – J3.3
Distance between bolts and edge [d] 1.25 - AISC 360-16 – J.3.4
Concrete breakout resistance Yes
Base metal capacity check at weld fusion face No AISC 360-16 – J2-2
Cracked concrete Yes ACI 318-14 – Chapter 17
Local deformation check No
Project:
Project no:
Author:

Item Value Unit Reference


Local deformation limit 0.03 - CIDECT DG 1, 3 - 1.1
Geometrical nonlinearity (GMNA) Yes Allow large deformations of hollow sections
Braced system No

You might also like