0% found this document useful (0 votes)
60 views1 page

Calibration Certificate for IP65DIGITAL

This certificate confirms that a calibration was performed on October 4, 2019 for a device with serial number 191004744 and model IP65DIGITAL. The calibration is certified by WD-GAGE to be in compliance with their laboratory standards and is valid until the next recommended calibration date of September 4, 2020. The certificate was issued by WENZHOU WEIDU ELECTRONICS CO., LTD on September 23, 2019 to verify that the calibration was performed according to their procedures.
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
60 views1 page

Calibration Certificate for IP65DIGITAL

This certificate confirms that a calibration was performed on October 4, 2019 for a device with serial number 191004744 and model IP65DIGITAL. The calibration is certified by WD-GAGE to be in compliance with their laboratory standards and is valid until the next recommended calibration date of September 4, 2020. The certificate was issued by WENZHOU WEIDU ELECTRONICS CO., LTD on September 23, 2019 to verify that the calibration was performed according to their procedures.
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

WENZHOU WEIDU ELECTRONICS CO.

, LTD
Via Ca´ Bella 143/A-B, 40053 Valsamoggia (BO)
Phone:+390517805141

Model: IP65DIGITAL

Date Emitting: September-23-19

Certificate of calibration
Date Calibration Due: September-04-20

Serial Number: 191004744


Date Calibrated: October-04-19

This certificate is provided for the calibration listed above to confirm


that said calibration has been calibrated in the laboratory of WD-
GAGE ®.

Statement of calibrated condition


in compliance with your request concerning calibration of above
instrument, WD-GAGE®. Provides the following information:
Our recommended cycle of calibrations is a twelve month cycle.

Certified By: WD-GAGE


WD-GAGE ®** THIS CERTIFICATE SHALL NOT
BE REPRODUCED, EXCEPT IN FULL, WITHOUT
THE WRITTEN APPROVAL OF THIS
LABORATORY**

You might also like