MUMMALANENI SAI KRISHNA

Boiler Field Engineer

PO BOX No.99,SMech Camp, Maamba, Zambia
Tel: (+260) 962702822
[email protected]

CAREER OBJECTIVE
To work in a firm that provides an opportunity to put my complete efforts for the development of the
organization and myself. I will also satisfy my higher authorities with my hard work and dedication and be a
part of the success of organization.
ACADEMIC CREDENTIALS

Qualification Discipline Institutions Board/University Year of Percentage

passing
B.Tech Mechanical Sree Kavitha Jawaharlal Nehru 2013 71.81%
Engineering Engineering College Technological University,
Hyderabad
12th Science-Math Sree Chaitanya Junior Board of Intermediate 2009 80.6%
stream College Education, A.P.
10th - R.R High School Board of Secondary 2007 76.33%
Education, A.P.

PROFESSIONAL TRAINING on THERMAL POWER PLANT

 One year trained on Power Plant Familiarization, Operation, Performance and Maintenance at
JINDAL INSTITUTE OF POWER TECHNOLOGY, Approved by Central Electricity Authority,
Ministry of Power, India.
 Rotational on Job Trained in the department of Operation and Maintenance of (4x250) MW BHEL
make O. P. JINDAL SUPER THERMAL POWER PLANT, Tamnar.
 3 weeks Simulator trained on 250MW, 600MW of PF Boilers replica of JPL, Tamnar.
 1 week Simulator trained on 135MW of CFBC Boiler replica of JSPL, Angul.
WORKING EXPERIENCE
1) Period : March 2015 to till date
Company Name : SMECH ENGINEERING SERVICES ZAMBIA LIMITED.
Locations : MAAMBA COLLIERIES LIMITED, Zambia.
Client Details : Plant capacity of 300MW
1) 2X150MW power plant with DONGFONG Turbine and Generator running with
2X510TPH DONGFONG CFBC boiler.
Designation : Boiler Field Engineer.
Nature of work : Boiler and its Auxiliaries Field operation.
Responsibilities : 1) Monitor and Performing the field operations in the below specific areas.
a) Boiler
b) Bed ash handling system
c) Condenser make-up system
d) Soot blowing system
e) Lime stone handling system
 f) Bed material handling system
2) Monitor and record the readings of various critical systems in the log sheets at
regular intervals.
3) Monitor and inform to the DCS Operator/Shift in-charge, if any abnormalities
found in the equipment operations.
4) Perform routine tasks relative to equipment operations.
5) Identifying the safety laps in the working area and informs to the safety officers
and shift in-charge.
6) Assistance in commissioning activities.
2) Period : November 2015 to February 2016.
Company Name : JINDAL POWER LIMITED.
Location : Tamnar, Raigarh, Chitthgarh.
Company Details : Ultra Mega Power Plant capacity of 3400MW
1) 4X250MW of Bharat Heavy Electricals Limited Turbine, Generator and Boiler.
2) 4X600MW of Bharat Heavy Electricals Limited Turbine, Generator and Boiler.
Nature of Work : Desk Engineer
Department : Coal Handling Plant (capacity: 2X3000 TPH) of 4X600 MW.
Responsibilities : 1) Working with operators/engineers reporting method to Shift In-charge.
2) Shift handling over / taking over.
3) Overall accountability for continuous, effective and safe operations of the
2X3000 TPH capacity of 4x600MW units Coal Handling Plant and be
responsible for minimizing downtime and optimizing costs of the CHP.
4) Pre checking of crushers, vibrating feeders, flap gates, belt conveyors
5) Coordination with mines.
6) Coal stocking and coal reclaiming from (Stacker cum re-claimer) and marking
of coal stock piles.
7) Operating Coal conveyors, Apron Feeder, Chain Feeder, Vibrating Grizzly
Screens, Ring Granulators, Fixed and Travelling Trippers, Unidirectional
Stacker cum Reclaimer.
8) Operating coal sampling unit by coordinate with chemistry lab.
9) Checking of Daily Maintenance schedule
10) Operating Dry Fog Dust Suppression system at skirt box.
11) Operating Sprinkler spraying system in coal Yards.
12) Blowing of sirens, hooters while starting of equipments.
13) Preparation of Coal Receiving/Feeding/Stocking/crushing Report.
14) Coal Blending with respect to coal properties.
15) Ensuring the proper sizing, screening of coal.
16) Ensure the implementation & practice of all safety awareness in site.
 17) Ensure healthiness of all equipment of CHP and rising of defect notifications
for any defects to the concerned maintenance departments and coordinate for
its rectification.
18) Issue work permits to maintenance departments and coordinate with them
for equipment isolation and take trial run of equipment after shutdown work.
19) Responsible for scheduled trials and routine changeover of equipment at all
locations is being done.
20) To properly record all operation related activities including Log Books,
Check List, Shift Routines, and PTWs.
2) Period : September 2013 to August 2014.
Company Name : SATHAVAHANA ISPAT LIMITED.
Location : Kudathini, Bellary, Karnataka.
Company Details : 1) 1X 50MW Power Plant GE Turbine and Generator running with 120 TPH
Waste Heat Recovery Boiler and 130 TPH CFBC Boilers.
2) Non recovery Coke Ovens with wet quenching process designed by ACRE,
China with a rated capacity of 4.5LMTPA.
Designation : Mechanical Engineer Trainee
Nature of work : Operational Desk/Field Engineer
1) Adjustments in running and minor repair of Pumps, CT fans, ID fans etc.,
2) Carry out Preventive maintenance like lubrication, replacement of filters,
aligning of couplings.
3) Monitoring of all parameters over the boiler and turbine side.
4) Trouble shooting of defects and faults in running.
5) Coordinate for turbine/boiler startups/shutdowns/emergencies and works
with power plant operators.
6) Coal yard and fly ash handling of CFBC boiler.
7) Technical recommendations for the items to be procured.
8) Follow up of items send for repairs and get back with accepted quality.
9) Finding out any design deviations in the plant and reporting.
10) Handle emergency situations of desk operation confidently & continuously
monitor parameters of desk operation.
11) Performance monitoring of boiler & turbine.
12) Implemented Standard Operating Procedures, equipment lockout tag out
procedures of power plant as per international standardization of
organization.
13) Performing the functions of troubleshooting and breakdown /preventive
/corrective maintenance for reducing downtime to minimum.
14) Maintain log books during the shift operation activities
 15) Operation and control of Auxiliary Units/Equipments including Pumps,
Water Cooled Condenser, Cooling water System, Vaccum Pulling and
Lube Oil System.
16) All mechanical isolation and de-isolation for the shut down and start up
17) Daily Generation report, coal/DM water consumption report.
18) Hands on experience in CFBC Boiler Technology and its operation
19) Actions on receipt of alarms and abnormalities.
ACADEMIC PROJECTS
 PG Project: Performance and Maintenance of XRP Pulverizer.
The pulveriser mill is a critical component in the coal-fired power plant .It plays an important role in
fuel combustion process. Most efficient way of utilizing coal for steam generation is to burn it in
pulverized form. Pulverized coal fire firing is a method where by 70 -80% crushed coal passes
through 200 mesh sieve which is carried by air through pipes directly to burners and discharged into
the combustion chamber.
As the age of the mill increases, the maintenance costs required for continued operation also
increase. The efficiency of the unit is affected to a greater degree by the air quantity and fineness of
the coal going to the furnace.
Monitoring critical dimensions and parameters on the mill ensures that the mill is functioning
correctly. Performing routine preventive inspections and anticipating component replacements ensure
that the maintenance activities are planned and not forced.
I took the performance and maintenance details of Raymond Bowl Mill (XRP-903) with trouble
shooting practices taken into consideration to make maximum availability for the unit generation
which is the main deciding factor for the plant load factor of the thermal power plants.

 UG Project: Design and Manufacturing of Hydraulic Power Pack.

Hydraulic power packs are stand-alone devices, as opposed to a built-in power supply for
hydraulic machinery. Some power packs are large, stationary units and others are more portable. They
have a hydraulic reservoir, which houses the fluid, regulators that allow users to control the amount of
pressure the power pack delivers to a valve, pressure supply lines and relief lines, a pump and a motor to
power the pump.
Hydraulic power packs typically offer a choice of valve connections, allowing users to connect
them to a control valve or valves to power a variety of machines. The power pack supplies hydraulic
power through a control valve to run another machine.

SOFTWARE PROFICIENCY
 Auto CAD trained at Autodesk™ authorized training center, HYD.

EXTRA –CURRICULAR ACTIVITIES

 Actively participated in various sports activities for inter school.
 Attended for INTERNATIONAL CONFERENCE on ADVANCE IN STEEL POWER AND
CONSTRUCTION TECHNOLOGY conducted by OPJIT, Raigarh.
 Volunteer for the NATIONAL SEMINAR on PROSPECTS AND CHALLENGES OF ELECTRICAL
POWER INDUSTRY IN INDIA.
 Student membership in INDIAN SOCIETY FOR TECHNICAL EDUCATION (ISTE).
 Student membership in COMPUTER SOCIETY OF INDIA (CSI).
 Industrial visits to Navbharat Ferro alloys Ltd,Central Workshop of Sengareni Colonies,Nalwa Steels and
Power ltd, Jindal Steels and Power Limited and Dongamahua Captive Power plant.
ACHIEVEMENTS
 Appreciation for the study on coal and coke spillage in Coke Oven.
 Won prizes in TECHNICAL QUIZ at various national level technical symposium.
 Won Special award for PAINTING at Prathima 5th All India Art Exhibition.
 Won first prize in 800mts RUNNING at Khammam Town School Games & Sports Meet.
 Volley ball RUNNERS, Kabaddi champions and BEST DEFENDER at College Games.
INTERPERSONAL SKILLS
 Rapidly build relationship and set up trust.
 Confident and Determined.
 Ability to cope up with different situations.
 Always ready to study new things.
PERSONAL DETAILS
 Father’s Name :- M. Venkata Rao
 Mother’s Name :- M. Parvathi
 Date of Birth :- 18thAugust 1992
 Language Known :- English, Hindi, Telugu, Kannada
 Marital Status :- Single
 Nationality/Religion :- Indian / Hindu
 Interest & Hobbies :- Internet browsing, Plantation and Sports

DECLARATION
I do hereby declare that the above information is true to the best of my knowledge.

Place: Maamba. Mummalaneni Sai Krishna

Date: (Signature)