C10 Communications PRODUCT DATA SHEET
NT1
C10
ISDN Network Termination
GENERAL FEATURES
C10 ISDN Network Termination NT1 terminates an • Universal ISDN termination device provides:
ETSI ISDN Basic Access digital interface in SME, 1 x U interface (RJ45)
2 x S/T interfaces (RJ45 S-Bus)
SOHO and residential environments. The NT1 provides
ISDN Basic Rate 2B+D signal channel transmission, • Local / remote power supply supported.
maintenance (D) channel including loopback test and
performance supervision functions. Two S/T interface • Restricted mode operation on loss of local power.
RJ45 ports facilitates interface with terminal • Local power supports full functionality.
equipments. • LED indicators for use and diagnostics.
It is designed to perform ISDN physical layer • Point -to-point or Point-to-Multipoint connections.
functions. It is installed between the exchange • S/T interface configurable (Short, extended, point
U-interface and the customer premises S/T interface. It to point).
converts the 2-wire echo cancelled 2BIQ line code to a • Selectable terminating resistance: 100 Ω, 50Ω,
customer premises 4-wire pseudo-ternary encoded none.
digital signal. • Desk or wall mounting.
The design permits unobtrusive desk mounted or wall • Cold and warm start for U interface.
mounted installation. • S/T Polarity reversed during restricted mode.
• S/T power feeding from PS1 power source.
• U interface complies with ANSI T1.601, ETSI
ETR080.
APPLICATIONS
• LT or TE activation for both directions
• Meets ITU – T K.21 lightning protection for U
• Small to medium enterprise (SME), small interface.
office/home office (SOHO) and residential data,
fax, multimedia, etc. capability. • Meets ITU – T I.430 420mW power feeding under
restricted mode.
• ISDN applications requiring S/T interface eg
phones, fax machines, videoconferencing. Internet • Selectable terminating resistance setting
access. • S/T bus configuration setting for short or extended
passive bus.
ISDN Terminal Equipment
TECHNICAL SPECIFICATIONS TE1 TE2 TE7
NT1
ISDN
C10 NT1
Exchange ISDN
Telephone
Electrical
Network Interface: Environmental
ETSI ISDN Basic Rate Interface to ETR 080 Temperature Range 0 to +50 oC
Line Code 2B1Q Humidity 0% to 95% RH
Structure 2B+D EMC Complies with CISPR 22
Line Rate 160 kbps Class B
Line Termination Impedance 135 Ω Lightning ITU – T K2.1
Physical Carrier 1 symmetrical cable pair
Loop Resistance 1250 Ω max Physical
Line Attenuation 42 dB max @ 40 kHz
Signalling Characteristics ANSI T1.601 (1992) Material Plastic high impact ABS
Dimensions:
NT1 Height 40 mm
S/T Interface: Length 130 mm
Complies with ETS 300 012 Width 91 mm
ITU-T I.430 Weight 0.24 kg
Plug Pak Height 70 mm
(Optional) Length 80 mm
Line Power Supply System: Width 50 mm
Weight 0.17 kg
Line Supply Voltage 32 to 115 V DC
Connections:
Current Less than 10 mA
U-Interface RJ45 socket
S/T Interface 2 x RJ45 sockets
Local Power Supply System: Visual Indication on NT1:
AC Supply Voltage 100 - 264 V AC 50-60 Hz
Line power available Green LED
Power 10 W
DC Voltage 40 V DC Local power activated Green LED
DC Current 250 mA SYNC / TEST Green / Amber LED
NOT synchronised: Green flashing fast
U synchronised, S/T not synchronised: Green flashing slowly
U and S/T synchronised: Green steady on
TEST: Amber
Represented by:
C10 products are subject to continuous development and
improvement and we reserve the right to change specifications without
notice.
C10 Communications
C10 Communications Pty Ltd ABN 85 073 528 702
Unit R8 Regents Park Estate Cnr Park Rd and Princes Rd East
Regents Park New South Wales 2143 Australia
Tel: +61-2-9722 3360 Fax: +61-2-9722 3344
http://www.c10.com.au
