Scribd
Upload
213 views18 pages

SUREFLEX Elastomeric Couplings

Acoples flexibles

Uploaded by

ToCaronte
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF or read online on Scribd
213 views18 pages

SUREFLEX Elastomeric Couplings

Acoples flexibles

Uploaded by

ToCaronte
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF or read online on Scribd
WWF TB Wood's SECTION F1 SURE-FLEX°® ELASTOMERIC COUPLINGS ¢ Need No Lubrication, No Maintenance © Quick, Easy Installation ¢ Clean, Quiet Performance @e 1B wooo's INCORPORATED Chambersbu ug, Pen ney Wvania 17201 B. WOOD'S CANADALTD. m Stratford, Or ll ir SURE-FLEX CAPABILITIES vals ‘TBWood's 4-WAY FLEXING ACTION absorbs all types of shock, vibration and misalignment TORSIONAL Sure-Flex coupling sleeves have an exceptional ability to absorb torsional shock and dampen torsional vibrations. The EPDM and Neoprene sleeves wind-up approxi- mately 15° torsionally at their rated torque. Hytrel sleeves will wind-up about 7°. ANGULAR The unique design of the Sure-Flex coupling's teeth allows for the absorption of angular misalignment without wear. Refer to page Fi—18 for actual allowable misalignment limits. These limits allow for the alignment of the coupling using only a scale and calipers. PARALLEL Parallel misalignment is absorbed without wear or appreciable energy losses. The lateral flexibility of the coupling sleeve minimizes radial bearing loads normally associated with parallel misalignment. This feature also allows for easier installation by the use of components bored for slip fits without fretting corrosion occurring at the shaft. Refer to page F1—18 for parallel misalignment limits. Only a straight-edge and feeler gage are required to obtain these limits. AXIAL Sure-Flex couplings may be used in applications with limited axial shaft movements. The axial compressibility of the EPDM and Neoprene sleeves allows for shaft end- float without the absolute transfer of thrust loads. SURE-FLEX FEATURES ll var hil TBWood's EASY, QUICK NO LUBRICATION, INSTALLATION TROUBLE-FREE OPERATION ‘Sure-Flex can be installed quickly and easily, The teeth of the sleeve lock into the teeth of because there are no bolts, gaskets, covers the flanges without clamps or screws, or seals. Alignment can be checked with a tightening under torque to provide smooth straightedge placed across the outside of the transmission of power. There is no rubbing precision-machined flanges. No special tools _action of metal against rubber to cause wear. are needed for installation, alignment or — Couplings are not affected by abrasives, dirt, removal. or moisture. This eliminates the need for lubrication or maintenance, provides clean, dependable, quiet performance. SURE-FLEX SELECTION Sure-Flex couplings are selected as component parts. 1. Determine SLEEVE material and type. Refer to pages Fi. & 5 2. Determine coupling SIZE. Refer to pages FI—6, 7, & 8 3. Determine FLANGES to be used Refer to pages F1—9 thru 16 Specify coupling components. + Example #1 - Close coupled PROD. NUNBER_| PROD. DESCRIPTION Size 6, Type S flange w 1-3/8 bore 68138 6Sx1-3/8 Size 6, Type S flange w 1” bore 6s1 esxt Size 6, Solid EPDM sleeve 6 6JE + Example #2 - 5” Between shaft spacer Size 9, Type SC flange for #11 hub 9sc5011 | 9SC50-11 Size 9, Type SC flange for #9 hub 9SC50 9SC50 Size 11 hub w 2-3/8 bore 11SCH238 | 11SCH x 2-3/8 Size 9 short hub w 1-1/8 bore 9SCHS118 | 9SCHS x 1-1/8 Size 9 Solid Hytrel sleeve 9H 9H ha TBWood’s mea SURE-FLEX SLEEVE SELECTION Sure-Flex Sleeves are available in four materials or compounds and various shape configurations. POM Neaprene yl Urethane CONSTRUCTIONS AVAILABLE ‘pe onsplt ve WN 4 u 1 pe soit JES ins ba 2 2picce E N is = TYPICAL USE Genera Oi Rew Genera Sitoass Purpose Non tame Purpose REL, RATING x 1K x x WIND-UP ANGULAR ie i ? 4 MISALIGN tie tie TEMPERATURE (F) maximum ws «200° 2250 200° minimum 30° -0° 65° —80° ‘SURE-FLEX SLEEVES Prodan] _Proauct Peat] proach Presa] Product Ron | pesston Ran | poset Ron | oes ption au] aie EPoM a) ae Eon oH er Ayre & | Seerom § | seerom ma | Ta tyet | sieerom | ceeron | au steal & | éiecrom > | 7EErOM oH | su Aire | feerom @ | acevo on | on yet & | aieerom 6 | seer ta | terol | sieePom wo | toeerow tan | lant! 1o)_| Sag com | teeroM a ae) aes Eom Spe 12 | weer is | it ue : 1s | taeerom mus | Ts spit Wee HS | Ales EPoM spi te | ae epow ais | ats pit hire Beam) SS EDDM Soi te _| ise rom as | Fs spit ye 7u8 | 7JES EPDM Spit 4N__| AN Neoprene 40HS | 10HS Spit Hytral BJS ‘JES EPDM Spiit 5N, '5N Neoprene HHS MHS Spit Hytrel gS ‘JES EPDM Split 6N 6N Neoprene 12HS 12HS Split Hytrel 10S 10JES EPDM Split 7N ‘7N Neoprene 13HS 13HS Split Hytrel HEIRS oues erow son _ REIMER) 7 Nooprone ans | tans Spit yt GIN] uN Neoprene 4JN 4JN Neoprene oN ‘9N Neoprene 10N | 10N Neoprene 10U | 10U Urethane SIN | 5JN Neoprene SNE NN: 40 | 11U Urethane BN | GIN Neoprene a SN Neowene ay | tau trenare 7N 7JN Neoprene prene BUN 8JN Neoprene 13N 13N Neoprene LEBINT | sin Neoprene | TEN | aN Nocbrne SINS] SINS Neoprene Si Ns | NS Noowone Salt Sins | SUNS Noopone Salt Sins | GINS Nesters Sat Zins | TINS Necbone Salt BUNS. Fi INS Neoprene Spit SURE-FLEX SLEEVE SELECTION Wii hal TBWood's Flexible sleeves for Wood's Sure-Flex couplings are available in four materials (EPDM Neoprene, Hytre! and Urethane) and in three basic constructions. Characteristics of the materials are given on page F1—4 and the various types are shown and described here. JE-JES-JN-JNS. 4J sleeves are molded EPDM rubber (E) ‘or Neoprene (N). They are avalabe in ‘one-piace solid construction (JE, JN) ot ‘one-piece spit constructon JES, JNS). ‘These sleeves may be used in any Sure-lex flange within a given siz. EN ‘These sleeves are of worpiece design witha retaining ring. They are available in either EPOM (E) or Neopeane (N) They may be used with any flange win a given size. Sleeves are shown here assembled and disassembled Eangn ‘Types E and N (Assembled) (Disassembled) HHS-U H (yee and U (Urethane) stoves, designed for highorque appicatons, ‘raromit our mes as much powot a8 an equivalent EPDM or Neoprene slove ‘Avalabo in one pece sold carton (H oF U) or two-piece spit corsucion {HS}, hese can be used only wih §, © ‘and SC fangos. Tey canot be used wth d'or B flanges of a8 det roplacemonts ‘or EPOM or Neoprene seves DIMENSIONS (in.) comm | RE E and Steves 108 HS Seees uli evils Sleeves EPDM & Neoprene Hytrl & Urethane We We W a) PL | tes) PL | ts) 3 | ae | 1 6 a | 2s | the | 30 | awe | i | i 5 | 2ii | te | 20 | ate | tem | 25 6 | ax | 1% | ao | ase | tm | 4s | ad | itm | ae 1 | aiie | 2am | ce | aime | 25m | 77 | ame | aoe | ‘69 @ | 5 | 2% | 11a | Sue | 2% | 14 | Sue | et | 14 es |e | os | tas 6 | os | 20 6 | os | ts to | rie | a%e | 232 | 7% | ote | 32 | 76 | ame | a9 it ane foe | st | bam | 4 | 45 2 aie | ate | at | 9% | aire | 73 8 thw] Ste] 130] ime | St | 118 18 t3iz | bie | a1 | tae | 6m | 93 6 178% | b% | 453 ‘The 10 and 14 Hyrel avalable wih HS slooves ony TAI) and 10) sloovesavaibl in EPOM ony Cony sizes avalabio in Urethane ll ir SURE-FLEX COUPLING SIZE SELECTION vals ‘TBWood's 1. Select Load Symbol based on your driveN machine. Fis ‘Application Lead Symbol Appleation Load Symbol Application Load Symbol ‘AGTATORS Pails Popsis, Suow...... DEWATERING SOREEN (se0age) MMS BAND RESAW (ub) WDSc FEEDER Gal Pte, Roe Tube, Rubber Tunbing. BARGE HAUL BULLER Hous woxen: Mi Dwar and Coote 4 BAFAING fume) He DRAW BENCH CONVEVOR aed aes BAR SCREEN oonage) CMAN OAIVE HN Cenerte, ster 4 BATCHES font { oaebers Sarou " BEATER AND PULSER ipape) fh 'CaBe es Pumps hm onecadster 4 BENDING AOLL (meta). Ml Cator Hoes Dv, i Bio, Sc Dive Hl QVENCONVEVOR: L BLEACHER (oa L_Mangzoring ad Uy Wee. Stacker" M—PLANE tal or wd) Ni Blowers pyNAvowle ER it Phesses’ Cetiugs, Vane Meck Sree Machine 4 ‘ose 4 He Neteing, Paper Punch, iieg i BOTTING Hohner push Ml BREW KETTLES (osingh L MM PULP-ORINER paper 4 BUCKET ELEVATOR OR CONVEYOR. 1M L PULVERZERS CALENDERS Hh Namarr=—to dy, Rr. 4 ‘Clear spo 4 oi L_ Marmarmil—eavy By, 05 4 Caterer super (oper Cider ber) H EXTRUDER (rita). Huns ‘CANE KNIVES ougan HO FANS ‘Centuga Aa (GARD MACHINE tio) H *Cenitugs ‘Sem Labo, Vane cy aR DUMPERS H Gating Tower HH Reepreceing~sp ord tg, (Gan PULLERS. Me _ovead Ora, Lara ln in 7M cir . (CEMENT KIN H FEEDERS feet ReWINGER (papoy GABLE iu GENTAFUGRL BLOWERS ‘Apre,Bet, Ose L ROD 4 COMPRESSORS, FANS or PUMPS .......L Boprooatng HH SawoUsT GoNWvEvoR t (CHEMICAL FEEDERS feonage) t Sco Me SCREENS CHULER on Mi EUTER PaeSs O1. MA Washing, Wate L CHBEER (pacer H GENERATORS Feta fre or sand rt GRCULAH RESAW furor) Me Unter as L vibaing W (lafirien oy cLassiFien ‘arying lad, Hos Mi gchew coiivevon (LAY WORKING MACHINERY. Wako HSLAB CONVEOR (mbar u GOLLECTORS cowago) GRIT COLLECTOR Wea { SUPTERS met M ‘Coupressons Gazz Hi SOAPERS fox) ‘Centupe Ramer SORTING TABLE urbe) u Reoprosaing| = Lig Dany termitnt Ml SPINNER fox) M Soom. Lobe ny Buy Conta Ho Stones rs CONCRETE NOME HOIST SUCTON AOL gape 4 CONVERTING MACHINE (pasa i Hy TENTER FRAMES tent). M Converors Mi TIREBULDING MACHINES: 4 ‘pte, Assembly Bl, Fg, Oven, Screw. H Tine § ube ents OPENER Sock 4 Ho TUWaLNG BARRELS 4 COOKERS Bring Sing, Feed 0k CAUNDRY WASHER or TUMBLER He Wasim ana THICKENER (papi) 007M GoouNG TOWER FANS Hh UNe'sharTs WaNGHES ue GOUeH ape Mi COGBAUL uma H WINDERS, Paper Teale, Wie MN CRANES and HOTS Me Loon eo) He WNDLASS. M ay uy Mra He MACHINE TOO‘S, iN Oi Mo WRE CRUSHERS! Caro ugar) Siéne aris H— MANGLE tx) f Drewng 4 (Correa Paper Ho Mass Tuas aii) Lb Wdeg Mi (CYLINDER per H MexT GriNoee Mi WOODWORKING MACHINERY t “comut acon ETAL FORNING WACHINES: MW 2. Determine Service Factor using Load Symbol and driveR. Load L M 4 Symbol Light Medium Heavy ‘Standard AC Motor DC Shunt Motor 1.25 15 2.0 “Engine, 8 or more cylinders High Torque AC Motor DC Series & Comp. 15 20 25 “Engine, 4-6 cylinders “Engine, 3 cylinders or less 2.0 25 3.0 Turbine 1.0 1.25 15 *On applications involving varying torque loads, design around the maximum load. Then determine the resulting srvice factor at minimum load. If this value is greater tran 4.0, special coupling alignment wil be required (see page F1—18}. Caution: Applications involving reciprocating engines and reciprocating driven devices are Subject to rotational vibrational critical speads which may destroy the coupling. The factory can determine these speeds when the rotational inertia (WR®) of the driveRt and driveN units is known, 3. SURE-FLEX COUPLING SIZE SELECTION (continued) If coupling to the shaft of a 60 HZ AC motor, you may refer to page 8, locate TM TBWood's the correct chart & columns for your sleeve material, motor speed and service factor; you can read the coupling size across from the motor horsepower. Example: For 150 HP @ 1750 RPM and 1.5 Service Factor - Use #13 EPDM or Neoprene or #10 Hytrel or Urethane. 4, For other speeds, use the following formula to calculate the required coupling horsepower rating @ 100 rpm. HP @ 100 rpm = HP x Service Factor x 100 / coupling RPM 5. Use the chart below to find a coupling with a HP @ 100 RPM rating which is Example: For 5 HP @ 55 RPM and 1.25 Service Factor: greater than calculated above. HP @ 100 = 5 x 1.25 x 100/55 = 11.36 Use #12 EPDM or Neoprene or #9 Hytrel with rating of 11.4 HP. COUPLING RATINGS ‘sue | EPDM | Neoprene HP @ RPM Torque | stiffness | Max Sleeves | Sleeves [00 [fio | 1750 [2500 | (in. lbs.) | (in.Ibsurad) | _RPM 3_[ seues | wwwns [oa [aa [a7 | 99 oo za | 9200, 4 EveJeS | NNNS [02 [22 [as [67 | 120 sa | 7600 3 EVEJES| NWNINS | 04 | 44 | 67 | 19 | 240 ‘216 | 7600 6 EVEJES | NJNINS [07 | ea | i25 | 25 | «50 iia | 6000 7 [eveves [Nuns [12 | 19 | 20 | 40 | 725 zea | 5250 a eveves | Nuns [18 [20 | a2 | 63 | 1195 4935 | 4500 @ | Eveves|_N 29 [33 | 50] 100 | 1800 6a75 | 3750 jo | Eveves | _N ‘a6 [53 | eo | 160 | 267s | 0980 | 3600 rT E N 72 | es | 126 | 252 | 4530 | 17900 | _a600 12 E N ina [192 | 200 200 | 27500 | 2800 13 E N va0 | 209 | 315 71350 | «9360 | 2400 14 € N za6_| 331_| 500 ‘2000 | —68785__| 2200 16 E 750_| 670 #7250 | 180480 | 1500 sue | fiwel | Urethane HP@ RPM Torque | stiffness | Max Steoves | Sleeves [ 100 | 1160 | 1750 | 3500 | (in.lbs.) | (in.Ibsvrad) | _RPM 6 | HHS 29 [33 | 60 | 100 | 1800 | 10000 | 6000 7_[ HHS 46 | sa | 00 | 160 | 287s | 20000 | 5250 aS 72 | es | 126 | 252 | 4590 90000 | 4500 9 [HHS iia [ 82 [200 | a0 | 7200 [47500 | ~3760) io [HHS u 1.0 | 208 [~ais | 630 | 11350 | f00000" | ~a600 [HHS u 2a [331 500 | 1000 | 18000 | 125000" | 3600 32 [HHS u 30.0 | 580 | a75 31500 | 225000" | 2800 73 [AS 750670 _| 4912 #7268 | 368900 | 2400 14) aS 7150 | 1094 | 2019 7480 | s99250 | 2200 * Urethane values are 220000, 350000, and 600000. l| ur SURE-FLEX COUPLING SELECTION al TBWood’s EPDM or NEOPRENE SLEEVES ‘350 RPM MOTORS: 1160 RPM MOTORS 1750 RPM MOTORS: 3500 RPM MOTORS: ‘Service Factors Service Factors Service Factors ‘Service Factors HP [roasts [20] 25| 4P [To]tas[ 15] 20] as | HP [io [2s [1s [20 TO] 125] 15 [20] 25 sfalal4 sfafalal«] wfalals]a afalals 3s] 3] 4} a} e] ulafals|a af 3] as) 3 afals| 5 a} 4] ef al s]i |afalale 3] 3] 3] 3) 3 s]s] 5] 6 a} a] 5] sls] im] sfalale« 3] 3] 3] 3] 4 5/5] 6] 6 al s]s}slele |afalals 3] 3] 3] 4] 4 sfelsl7 s| s|e| sl als |«fs|s|s sf af alas sf 7] rl 3 8] 6] es} 7] 7/5 |sfslele af 4] 5] 5] 5 tla} sl s| mls] 7) 7] 8] alm] sfsls|z 5] 5] 5] 5] 6 sfal sls 7) 7} als} sf |s|slr] 7 5] 5] él 5] 6 3] 3} 10 10 ale] s}s}wlwlrfrfele 6| s}el 7) 7 9 fro} a0] a1 a] 9] s}il 1] a} rfelsls sls] 7 8 so fio] | at 8] sftofsol | ]efaleles 6| 7] 7 8 woffa] v2 s{rofto} alr] a fefe ler 7] 7/8 9 ui fafa] 2 wo] ofa] nr] a | 9] s so fro 7] 8| 8 9 ui fiz} a2] 13 wo] av far] 2] 2] so | 9] foo a} se] 2} a) 10 wo far fr fi2}as} io sf farz] v2] taf eo fro |r far a} se} 210] 10 7 fiz] 2 fas | a3] 14 at] 2 fiz] 3] a3] 7 Jafar [in fre 8] 3 fro] so] wo fz fia fra] te] 14 wz] 2 fs] x3] 1 faoo far Jar faz fr faa foo fof fio fn] ws Jos fia [ua] 14 2] x3] 13] s4] t4 fa2s | ar fre faz faa | 13 ]25 fo] 10 fv] 150 [03 | 14 fra fas 13] 13] 14] s4] a6 f150 | 12 | 12 as faa] 4 ]a50 J ao as fo 200 |r [re fre | a6 1a] s4 f 14] s8] 16 faoo rz ]13 as fr] 4 Jao for | 250 | v4 [as fis | 18 18] 14 | 16] 98] 18 [aso J a3 fas Jaa faa]... [aso | a s00 | 18 | 16 fis | 16 14] 18 16 | 18] 16 300 | 13] 14 re 300 350 | +6 | 16 fre we| +6 |16| +8] 16 [350 | 14 | 14 350 woo | +6 | 16 fre we] x6 fae) +8]... faa | 14 | 14 100 aso | 18 | 18 18 18 ao |e 480 500 | 16 | 16 18 | 6 soo | 14 500 00 | 16 16 600 00 700 700 700 00 200 00 HYTREL or URETHANE SLEEVES ‘360 APM MOTORS: 1160 RPM MOTORS 1750 APM MOTORS: '3500 RPM MOTORS Service Factors ‘Servi Factors Service Factors ‘Servi Faciors HP [royr2s|ts]20[25| HP Proytas| is] 20 25] HP lroyas|is [20 [as] MP [io]125] 18] 20] 25 3] 6) 6) 6] al Tia Tia) 6/6] 6] 6] w 6 8| 1 10 6/6} 7] 7] 5 6| 7] sfs|e é 15 6/7] 7] 3] 2 7| 7| afs|e 6] 8| 2 7/7] 8] 8] 2 7| 8| stele sl 7] 3 0 7] 8] 8] 9] a a) s| ofs]sfslz) 7] wl] el » 8] 8] s| 9] 4 3) 9| ws) s]7} 7) a] a] sls 50 8| 3] 8} 10] 50 s| 9| so] s] 7] 7} a} a] sol sl 5 0 8| s] 10] 10] 60 s| | of} 7)7]sla} a] sol sls % 8 {10} io} a] 7 sof io} %] 7) fs] s]s| | 6] 6 soo] 9} 10] sof} a1 | t00 wo} |] 8] sf o] |i] 10] 6} 7 i]s} 10 | far | a2 | 125 tf} a] 8] 9] s]if iol ws] 7] 7 350 [20] 1 | a2] 22 | 150 afs2] 0] 9] 9 fro]ao ft] ao] 7] @ 200 |r fas | sz] a2] 93 | 200 v2] 12] 20] 910 fio] || ao] af e aso | fr | 2] a3] 93 | 250 2| 13 250 fxo| 10 |) |i2| 250] af 2 soo | 2} 12 | 1313} 4 | goo sa} 1a | soo w}i2] 2] a0} 9} 9 fro] 10] a 50 | 2] 12 | 23] ae] oa | 350 af 14 | 350 2] a2] i] a0] sfso fafa} a woo | 2] 13 | 13 ft] 4 | 400 3] 14 | 400 2] 12] 13] a0] 8} sro} a} a so | 13] 13 | 14] te]... | 500 sa] 14 | 500 12| 13 | 13 | s00 | 0] 10 | fn 600 | 13] 14 | 4 600 val. | 600 13] 13 | 14 | e00 | 10) at for 00 | 14 | 12 sa]... | 700 13] 14 | 14 | roo fn 00 | v4 | 12 00 13] 14 | 14 | aoo | os fn 300 00 ra] te]... | 00 | 1 1000 1000, 4 [44 [000 | + Fis TYPE J SURE-FLEX [Vivir BTS - FOR CLOSE COUPLED APPLICATIONS adda TBWood's FLANGES Type J flanges size 3 and 4 are die cast of high-strength alloy and are furnished bored-to-size for a slip fit on a standard shaft. The 4G40A zinc alloy used has a tensile strength of 41,000 psi. Sizes 5 and 6 are made of high-strength cast iron and are bored- to'size for slip fit on standard shafts. The outside diameter of the flange is machined so the surface can be Used to check alignment without a special tool. Type J flanges can be used with sleeves of any construction except the Hytrel. Each flange has a keyseat and 2 setscrews. COUPLINGS Type J Sure-Flex Couplings are bored-to-size. Normally, they employ the one-piece JE sleeve, or the one- piece JES sleeve with'saw cut to permit replacement where there is insufficient gap between shatts. Spacing between internal flange hubs equals G. Spacing between. shafts | should be greater than 1/8 in. and 1] less than L minus .85 times the sum > te o- of the two bore diameters. | | | To order complete couplings, specify | couping size with fange, symbol af giving bore and keyseat. Refer to \ Page F1-3 to order the required —_ coupling. DIMENSIONS (in.) STOCK BORET. Produc Dinesons Ls Theta Nv iinet "a es) ja, cl] DIE HL T X_ | w [aia tia 5] aia [7 |15i46| + |1-19}-airelt-14|1-918 [Bore] 9 |11 [12] 14|15]16|19| 2026 |25, ay fine [2062 ace |a8]-12|raraefases) we Joa]x |x] x] x] x | XIX] PTX] AJ | 55164 | 2.460) 27164 1-518 /2-11192] 7/16] 8B ]O4) |X| X|X|X! X 1X) KIX PPP XTX |X 51 |1-364/5250| ned] -|2craz|t9ae| 964) 09] |x| x|x| x) x |x] x 19 6)_|1-5/16] 4.000] 16 | 78 [2-1/2] 3-ti2 | 34 [1-9792] 1.2 {Xt x x [x] x] xX | x] x fs {eae nt tcanmena eosin he a Flange. Se page F119 fr stardaaeyea 1 Approximate weight each tange ha TBWood’s TMT TYPE S SURE-FLEX lull ets - FOR CLOSE COUPLED APPLICATIONS FLANGES Type S flanges are made of high strength cast iron and are bored-to size for slp fit on standard shaft. They are easy to install and remove, and are available from stock in a wide range of bore sizes. Type S couplings may be used with any of the sleeves shown on page F1—S. - | x Bore Tolerances for | Types J and S Flanges, ‘SC Hubs | These bores provide a slip fit | oo | ot r Bore (in) | Tolerance (in) | Upto and | +0008 0 + 0015 | } including Over 2° _| + 000510 +0020 DIMENSIONS (in.) ou DIMENSIONS Ting sue|c]o]elafalilr|x Feet [sem |e af ra] ee [1 [oft ex eae un a BSCE CEORROEE 6s | 1a u tate ta q 15 [rae sve 26 fobal [ae ee ea i 288 we} ay | fo 8 lise | 37 re rae] ee § loa 1a | a2 Ea 2 | as 18 Ios a [se a 28 | Be lol fale ay erated Polat PP alate ae 228 | 64 tts ctl ae ala] FD [Iatalafatai 188 | 8 si [2 CTCL bebe Ce ws [#12 ne | 7 ‘wl 4 [iss X inthe chart denotes fished bore wih heyseat and 2 ses 1m Approximate weight foreach flange. Fito ‘ws; Ois pan bore suitable fr reborng TYPE S SURE-FLEX [ViVi BTS - FOR CLOSE COUPLED APPLICATIONS aid TBWood's COUPLINGS — Type S Sure-Flex couplings are ro4 normally supplied with the two: ry piece E sleeve. However, any of the in sleeves shown on page Fi—5 can t al be used with Type S flanges. | l | Spacing between internal flange a |. hubs equals L minus 2 times C. ToT i ‘Spacing between shafts should be greater than 1/8 in, and less than L minus .85 times the sum of the two + | | bore diameters. Jj__) To order complete couplings, rommon yl specity coupling size with flange es symbol (S) giving bore and keyseat Refer to page Fi—3 to order the required coupling DIMENSIONS (in.) STOCK BORES Max Boe Wilieters 44s 90) 90 ‘SHALLOW KEYSEAT DMENSIONS Boe | KS. | Key — |r] KS | Key | Boe] KS. | Key fa) xpefeh a enero i sex5teK a 176 | ions [roxsexsss al IaIayx aaa OEY a} Jaqapyy ofa ox za | sontafsnxnenia | ala} sure [asxioxzo4 aunts [sexsoxeae 93 rexste 19x58 x20 v6 | ame | rexare [rexsexs: se | os | tie | iaers 16_[ st 1 See carson page FINS © Somelage bore TypeS fangs are supped wih salow koyseas In these cases, a rectargul ky furished, The bores involed are ited above, ‘A158 or 1-12 bore, 156 for 1-5 bore. Fiat Ice TYPE B BUSHED-FLEX QD - FOR CLOSE COUPLED APPLICATIONS TBWood's FLANGES Type B flanges are made of high- strength cast iron the same as Types S, Cand SC Sure-Flex flanges. Type B, however, is designed to accommodate Wood's Sure-Grip Bushing for easy installation and removal BUSHINGS ‘Sure-Grip Bushings offer convenient mounting of the flange to the shaft 4 securely without setsorews. They | are tapered and are split through | | both the bushing flange and taper to J provide a clamp fit, eliminating wobble, vibration and fretting corrosion. This is the same bushing used in Wood's sheaves and pulleys and is readily available everywhere. DIMENSIONS (in.) Weight Product | Bushing Dimensions Max.* (Ibs) No. |Required] cy | cp | 0 | — | F | G | tL | T | X | Bore | Flange | Bushing ] WA | te | 1 | 400) Hy | 2 » | 3% | me | te | iy | 4] 8 mB) WwW] 14 | 1 | 465) 3% | Me | tH | tu | te] 8 eB] SH | tae] 1% | 5450) a 4% | Ae | tte | 1% | 29] 10 9B | so | 2% | 1% | 6050) 5, 4 | 1% | 1% 4a) 15 1B | SK | 1%] 1% | 7500) ay 5% | 1% | 2 78) 20 MB] SF | 2% | 2 | 865) My yu | te | 2% 20} 35 m6] & | 2a] 2% | 1000} a, 7% | 1% | 2% 180 | 90 198] F | a% | a5 | 11750) the 84 | im | 3 a2] 140 mB} F | a% | 3% | 13875 | the 9% | 2u | 3% si4| 140 ea | ss | 4 | 18875 | 1% ray | 2% | 4m soo | 220 “Maximum bore with keyseat. Ml Approximate weight for each flange. Fi TYPE B BUSHED-FLEX Wt QD - FOR CLOSE COUPLED APPLICATIONS ‘SURE-GRIP° BUSHING MI vi TBWood's COUPLINGS Type B Sure-Flex Couplings are normally supplied with the two siece E sleeve, and can use any EPDM or Neoorene sleeves. 00 NOT use Hytrel sleeves with Type 8 couplings. Spacing between internal lange nubs equals L minus 2 times C. Spacing between shatts should be greater than 1/8 in. and less than G. To order complete couplings, specify coupling size with flange symbol (8) and bushing. Refer to gage F1—3 to order the reguirec coupling. Refer to charts below for oushings KEYSEAT DIMENSIONS (in.) Standard Keyseat Dimension Bushing | ores Keyseat Bushing | —Bores Keyseat hat Dia. | Width Depth Standard 2 D Standard © e he JA Hg SF | 25-2 | Sex% Me ty tax'e 24-24 | Seg % ny 2M By | UX oe Se Standard @ 2g ty SH Bg % a NoKS. y-2h | Sendad 1144-21, a tn E | ema | ut 2h 2% & | te Standard @ B43 % | Tex 2 MgB % %s aX sp ‘aX 13% | Standard @ 354-34 % he aXe F | 3%q-3% | TeXhe 1 ‘y Noks. Bg 3 Hig 1% Vy 5 4 NoKS. 1% % a2 | Standard @ SK | 2% -24 | text tTig3%q | Sandard @ Dig 2 ip | SEX g J | a%-3% | 1x3 24-25, | NOKS. 4 11% Fi-13 BTS - CONVENTIONAL SPACER DESIGN l| il TYPE SC SPACER COUPLINGS hale TBWood’s BTS - CONVENTIONAL SPACER DESIGN ' & The table below shows assembled dimensions of Sure-Flex Type SC ‘Spacer Couplings. For dimensions . ‘at of separate components, refer to a Wha page Fi—15, Required | Use Use Dimensions wi Coupling | Distance | Flange Hub | Max. Bore (ios) Size | Between | No. No. |siaks | o | 1@ | o re |. Shafts asc [31 [asc Ten | 2a | 556 _[ 56 Zr SSC | 312 | 5SC35 SCH 8 | -3250_| 558 [a4 |aite_| 45 S12 | 68035, @SCHESCHS | 1-as | ~8000_| 5-78 | 78 [ae [73 esc [age —[“escaa esCHeSCHS | 1318 —[-4000_| ea [78 [ae [a 5, ESC50 @SCHESCHS | 1-38 | 4000_| 7-98_| 78 [ae [87 Bie 7835. TSCHr7SCHS[1-sis—|~4625| —-a1s—[—1 sao rsc [Tae [“7scue TSGHTSCHS | 1-58 | 4605 [7-14 _| 1 58 | 108 5 7050 "TSCHTSCHS | 1-518 | 4605] 7-78 se [114 pie 85035 ascHascHS | 1-78 | 5450] 678 iwi [ 152 88035-10_| TOSCH-TOSCHS_[2-38 | 6.a80_| 68 rali6_| 232 ssc [ "age [sca ‘asCHascHS | 1-78 —[-5.450_| 73 Tarte 16 5 aSC50 aSCHASCHS | 1-78 | 5450 | 6-8 ane [174 aSC50-10 | TOSCH-10SCHS_[—2-ais —|~5.450_| 9-518 rane_[272 Tia _| 98635 @sCHOSCHS | 218 | 6350 | 7-2 116] 186 38 | 98caa @SCHASCHS | 2-18 | 6350 | ere rine_| 222 ssc ; ISCO BSCHISCHS—|-218 —| -6.350—| 878 rie] 232 8805071 _| TISGH-TISCHS [2-788 | 6350_| 70-8 rrane| 40.4 7. asG7o-t1 | 1iscH-tiscHs [2-78 | 6.280_| 12-38 rane_[ 482 Talk| escre-1 | 1iscH-11scHs_[ 278 | 6.350 | 13-18 rai16] S10 eft | Toscas_—| 10SCH-10SCHS_| e316 | 7's00| 9-38 ran[ 376 3 [asco —Tascrrtoscrs | 2318 [7500] 358 raie [a tose 7 [0sc7eig[1s8cH1sscHS_|satx_| 7500] isa 78 | 720 Ta [“wsc7e-1s | tascr-1ascrs [33% | 7500—| aaa 1718 [ 7607 0 | 1osci00-i5-[rascH-13SCHS | sais | 7500] 1658 “e718 | 880 wa —[118cas —[TiSGH-11SCHS|-2-7la | 625 | 1016 Tale st5 3 [isos [riscrtiscHs | 27 | 6625 | 10-98 36_[ 547 1180 7 hriscrea_| asc S78 | 8625 | 1458 2 [86.1 Tat isc7e-1t 1aSCH 378 —[ 865 [isa 2 [eas 0 11sci00-1@|-—14scH S78 | 8625 _| 1758 2 hier 7 12870 ——|-T2SCH-128CHS_| 2-718 —|-10.000—| 12-778 Tia] 68.1 12807074 14SCH $718 | 10000145) 2 eet wesc [aq Ltescre_— | TaS0H SCH [2-78 | 10.000 | 1s Tig] a9 12S07ETE TaSCH S78 [10000158 2 hia Fo [1asci00-1& [14s S78 | 10.000 | 1758 257 wast _[ rat isst78 aS ass [Same [760 aa Tea. asc [ras [14576 14SCH S78 [138751538 2 1799) 1 Approximate woight for completly assembled spacer couping (() 435036 x 1-118 has shaliow keySeat. (2) dimension and weight wil change if one or two shart (HS) hubs used. Note: Retr to page F115 order-~ specty components separately isd TYPE SC FLANGES AND HUBS Fit4 Tables on page F1—15 provide dimensional information for flanges and hubs used for Spacer Couplings. For assembled dimensions, see table above. Any of the sleeves shown on page F1—5 may be used. BTS - CONVENTIONAL SPACER DESIGN TYPE SC FLANGES AND HUBS ll rv My (ILLUSTRATION AND DIMENSIONAL DRAWINGS SHOWN AT BOTTOM OF PAGE F114) TB Weed's Fer Wt couping | Range | distance for Oimensions (bs) See | Ne8 | Seton fb “ Shuts D msc ses | 380 cs 2 z e038 i | Sees eso | focu tas | sscitescs S050 SScHSc T3035 zig} Teche rscHs we | Tscat fae | Teckrscrs 73680 a. | Tschkrschs S038 iE] —ESCHPaSCES sscos0 | aie | roscriosens wc | bstat tae | “Scnascis S050 $s | ssctascis sscso0 | 5 | roscretoscns a TIE] sscHrascts sce tae | sscHascs S050 S| _sscHascis wo | sscson |g | nscenscns esc | > | tsoeriscHs som | rae | hecnsc 7ascis eae | sce t0scrs ‘ses 5 | toscrtosces rose | ascros | > | tasceioscrs oscress | rae | tascrtasces joscioota | ‘ia’ | tascetasces sca Fae TiscenscHs ns¢so 3) | sscenscHs nse | isco | 7 asc tiscrass | rae a8cH iiscioois_|_ “to 4804 sc7o 7 | TSG TSO tscou | 7 pe ese | 12scrs rae | ascietasoHs vescrene | Pal “ascH scoot | ip HscH age_[ “158078 7 [ SCH SOS 188 —| “S078 Tae ISH 7 Flanges canbe bdo aera Bebo Sak Dnersane See char page FTG. Wl Apraate wag ear arg ‘auneg sor hub MecNG x2 lng epee nua tired STOCK BORES* Dimensions we couping| tub | aa, [Phin Bore wih Standard Capers | (bs) See | No | Bore | Bore Keynay 8S Screw ¢ 4 Furnes | Uw asc t 8 30=70-1 18 we [2 ss¢_[ 6808 [| 1 | 53-181 18 ‘ag [2 A TT OPE RERE une re 4 escs |i a a a aE SESE ESE ENEEST ise [paste [ams n cus | 7 i ri oe a ro ingsisee ies ia saame_| san | esrevar | 32 roo 7a img [ae eegexr ga [20 sscH Te [1-18-1881 ssc 158=194— 178-248 ase | coexoou | a2 SoH 118 356 | «38x24 | 37 vaso [_tsou i@_[ 188 178-218-208 436 [ere rsa [78 SCH. 18 eae | i212 | 8 ee FATS 1@_| 178-218-288-278 Sia | emsguaig | 2 TiSCHS 118-158 sim | amnenzsu | 93 so [aseH fae _[-21e-298-278 sae] ast | 165, 28cHS 28 sae | ase ate | vas ‘eso [ASSO 338_[ 256-278-358 ee | es xe12 [199 195cis 28-298 eis | a-s0x992 | 160 vase | SCH 758_[ 20e-278-008-078 ei2 | sexs [a2 1 FOR SC ne bis ang par ole fageA1S0x 1-1 has 14118 alow teyee. Appoint wet reac hu 1 See page F1-"o tr bore leanne F112 sd aya reson Fis mea BETWEEN SHAFT SPACINGS AVAILABLE id TBWood's Spacer couplings are available having the most ‘The “Standard” column provides spacings using popular between shaft dimensions. Other identical flanges; the ‘Combination” column mixes spacings can be achieved by mixing flanges. flanges; the column headed “Semi-Spacer” uses ‘one flange that is not made for spacer coupling applications and thus does not have a detachable: hub. STANDARD ‘COMBINATION SEMI-SPACER rhe 7] [eB STANDARD COMBINATION SEMI-SPACER Spacing | Use Flanges Spacing | UseFlanges* Spacing | Use Flanges* 312 2( )SC35 315/16 SC35 & SC44 1-718 S$ &SC35 4a | 2( )scaa 44/4 | SC35&SC50 256 | S&Sc44 5 2( )SC50 41116 SC44 & SC50 2-5/8 $&SC50 7 2-( )SC70 5-1/4 SC35 & SC70 3-5/8 S$ &SC70 7-314 2( )SC78 5-5/8 SC35 & SC78 4 S&SC78 10 2 )$C100 54116 | sca4&SC70 5418 | Sasctoo 6 SC50 & SC70 6116 | sc44asc78 6-3/8 | SC50&SC78 6-3/4 | SC35& SC100" 7-316 | SC44&SC100" 7-318 | SC70&SC78 7-1/2 | SC50 &SC100 8-1/2 | SC70&SC100 8-7/8 | SC78&SC100 * Check individual coupling size for flange availabilty * Non-Stock: Note: Other combinations available — consult factory. Fie TYPE C SURE-FLEX |jVii" ddl ‘TBWood's CLAMP HUB - SPACER DESIGN Hytel sleeves. However, any ofthe slee shown on page F1—5 can be used. Typ: couplings may offen be used where spa couplings ae required Spacing between internal flange hi equals G. To order complete couplings, spe coupling size wih flange symbol (C), gi bore required. Reter to page F1—3 to or the reqited couping Dimensions ole|el|wiulx 4oo| 116 | 7a] 3 | sae | 4 aes] sat | site| oa | sa | 1206 sao] 159 | am fae | sus | 198 aan] sa7 | tae | ev | rans | 126 rato | 228 [ute] s | ertne | wate DIMENSIONS (in.) Maximum Bore | Distance Approx Fange| Stock Bores | Min, Between Dimensions Wt. she Bore |standaré| Shallow (bs Keysoat | Keyseat| Win. (wax) ¢ | o |e | @ |u| ue | x co | 118,17, sme ra | 198 | 178 | 2 | ase] 14516] 4000] 116 | 78] 3 | age | 1 | 26 1 | 198,178, 38nn,0nm | 148) ene | - 2516 | sre) zane | agz5] vat | vate | si | sams | 126) 36 | 198,158, 194,178 21.214,298,40mn | 198] 214 | 298 | zane] 4 | 24m | saso] 150 | 148 foe | ene | 148) 5 G | 188,194, 178.2, 2m o142a8.212 | 138 | 242 | anne |sine| 458] 3 [am] 197 | rane] aim | rae | rate | as too | 198 178,204,208,210| 198 | 278 | - | sane] saw | 3-10 | rato | 228 | rss] s | aris | ate) 168 io | 208,268 202 vag} sae | - | ane | 578] ¢ | ses] 25 | 178 | sae | az6 | ats | aso se jose ta | 308 | - | 47 | ere | 438 from | 26s | cae | 6 | re | cae | os For Siandard keyseat dimensions, see char page Fi—13. * Weight of one fang. Bore Tolerances for Type C Flanges Shallow Keyseat Dimensions ‘Tnese bores provide a slip Some lage boro Type C anges are supa wth shaw koysats. In hase cases, “Bore (in) | Tolerance in.) 2 8t4ngular kay funshed. The fanges and bores involved are as flows Up to and See Bore Range is ey Furnished Inctuging 2° | 4.0005 to +.0015 0 ‘intone | vax tte | 12xsitex 156 ‘over2” | +0008 to +.0020 « 2sieio293 | 88x16 | 58x98x212 ar —_

You might also like