MINI CX

Manual Quickhitch

䢇 Increases safety and reduces

operator effort when changing
buckets and attachments
䢇 Durable design, with hardened
steel jaws to minimise wear
䢇 Mechanically operated with
spring loaded lock released by
use of a separate release bar
䢇 High visibility safety lock pin
prevents accidental loss of

䢇
bucket or attachment
Supplied “Ready to Go” with
release bar and hitch pins
D
Part Number Type of Quickhitch

980/88424 Manual

GP Bucket

䢇 GP Buckets are available in a variety of widths to increase machine versatility

䢇 A rolled top section increases structural integrity
䢇 Sideplate reinforcement offers additional strength and rigidity
䢇 Replaceable wearparts increase durability and extend the working life

Part Number Width (in) Width (mm) Capacity (m3) Duty Teeth

522/07200 6 150 0.009 Standard Standard

522/00100 9 230 0.017 Standard Standard
522/00300 12 300 0.024 Standard Standard
522/00500* 16 400 0.035 Standard Standard
522/01100 18 450 0.041 Standard Standard
522/00700 24 600 0.047 Standard Standard

* Non standard size

Optional weld in bucket pins 980/86023 are available

JCB ATTACHMENTS Issue 1 D.1

 MINI CX MINI CX
Ditch Maintenance Bucket Kerbmaster

䢇 The safe and simple way of

manipulating kerbstones up to
70kgs in weight
䢇 Incorporates hose burst check
valve for failsafe operation
䢇 Wearparts give good gripping
properties without damage to the
kerbstone

D 䢇

䢇
Manual rotation offers line man
total control of kerb alignment
Maximum grab opening 170mm
D
䢇 Side plate reinforcement offers additional strength and rigidity
䢇 Drainage holes reduce weight/density during operation

Part Number Width (in) Width (mm) Capacity (m3) Duty Teeth

522/00900 36 900 N/A Standard N/A

Earthdrill
Part Number Description

980/89944 Manual Rotation Kerb Grab

980/89943 Kerb Grab installation kit required
䢇 For accurate and precise
drilling
䢇 Maximum torque drilling
power 1400Nm Hammermaster
䢇 Standard 2" hexagon drive
䢇 Choice of standard flight sizes Hammermaster HM65 980/90866 - for details see section L
䢇 Replacement teeth and pilot
䢇 For utility work, building, construction and groundcare
bits available for greater
service life 䢇 Durable design, virtually maintenance free
䢇 Sealed for life accumulator
䢇 Supplied “Ready to Go” with hoses, hanger bracket and moil and chisel

Part Number Maximum recommended standard Flight

980/89653 1000mm length, 375mm (15”) diameter*

* See section K for details of flights

D.2 JCB ATTACHMENTS Issue 1 JCB ATTACHMENTS Issue 1 D.3

1 1CX
Manual Quickhitch
1CX
Ditch Maintenance Bucket

䢇 Provides greater safety and

less effort for the operator to
change buckets and
attachments
䢇 Durable design, with hardened
steel jaws to minimise wear
䢇 Mechanically operated with
spring loaded lock released by
use of a separate release bar

D 䢇 High visibility safety lock pin

prevents accidental loss of
bucket or attachment
D
䢇 Side plate reinforcement offers additional strength and rigidity
䢇 Drainage holes reduce weight/density during operation
Part Number Type of Quickhitch

980/88451 Manual Part Number Width (in) Width (mm) Capacity (m3) Duty Teeth

980/65600 39 1000 0.08 Standard N/A

GP Bucket

GP Shovel

䢇 Designed for maximum performance and durability

䢇 GP Buckets are available in a variety of widths to increase machine versatility 䢇 Teeth and toeplate options for even longer service life
䢇 A rolled top section increases structural integrity 䢇 Quickhitch mount for rapid changeover times, increases productivity
䢇 Sideplate reinforcement offers additional strength and rigidity
䢇 Replaceable wearparts increase durability and extend the working life Part Number Width (in) Width (mm) Capacity (m3) Duty Teeth

331/12909 62 1580 0.32 General Purpose Optional

Part Number Width (in) Width (mm) Capacity (m3) Duty Teeth
512/07800 62 1580 0.32 Heavy Duty Optional
528/51400* 9 230 0.026 Standard Standard
528/51500 12 300 0.038 Standard Standard
528/51600 18 450 0.062 Standard Standard
528/51700 24 600 0.086 Standard Standard

* Requires 2 x Bucket Pins 811/50335

D.4 JCB ATTACHMENTS Issue 1 JCB ATTACHMENTS Issue 1 D.5

1 1CX
6 in 1 Shovel
1CX
Earthdrill

䢇 For accurate and precise

drilling
䢇 Maximum torque drilling
power 3500Nm
䢇 Standard 2" hexagon drive
䢇 Choice of standard or heavy
duty flights

D 䢇 Replacement teeth and pilot

bits available for greater
service life
D
䢇 Maximises loader productivity giving the operator a wider choice of options
䢇 The options are dozing, loading, digging, grabbing, spreading and grading
䢇 Teeth and toeplate options for even longer service life
䢇 Quickhitch mount for rapid changeover times increases productivity

Part Number Maximum recommended standard Flight

Part Number Width (in) Width (mm) Capacity (m3) Duty Teeth
980/89657 1200mm (47”) length, 760mm (30”) diameter*
512/05100 62 1580 0.28 General purpose Optional
* See section L for details of flights

Side Tip Shovel Industrial Forks

䢇 Enables the machine to be

utilised for loading and stacking
䢇 Designed for safe and accurate placement of infill materials 䢇 Various fork length options
䢇 Available as LH or RH options available to reduce possible
䢇 Designed to operate from the loader auxiliary service damage when stacking

䢇 Allows the operator to face the traffic and reduces potential traffic hazards 䢇 Supplied with certification
(lift governed by machine
䢇 Quickhitch mount for rapid changeover times increases productivity capability)

Part Number Width (in) Width (mm) Capacity (m3) Duty Description Part Number Length (in) Length (mm) Class Type

980/78200 63 1600 0.39 Standard Left Hand Option 531/99400 42 1050 2B Industrial Forks
980/78100 63 1600 0.39 Standard Right Hand Option 528/52000 48 1220 2B Fork Frame
528/52100 47 1200 N/A Loadguard

D.6 JCB ATTACHMENTS Issue 1 JCB ATTACHMENTS Issue 1 D.7

 1CX 2CX/2CX AIR MASTER
Sweeper Collector Manual Quickhitch

䢇 Provides greater safety and

less effort for the operator to
change buckets and attachments
䢇 Durable design, with harden steel
jaws that keep wear to a minimum
䢇 Mechanically operated with spring
loaded lock released by use of a
tommy bar.

D 䢇 The safety lock pin prevents

accidental loss of bucket or
attachment D
Part Number Type of Quickhitch
䢇 Full width sweeping with optional gutter brush 980/00100 Manual
䢇 Optional gutter brush water sprinkler system available
䢇 Suitable for light and general duty
䢇 Quickhitch mount for rapid changeover times
GP Bucket
Part Number Width (in) Width (mm) Duty

980/88390 60 1530 Standard

Hammermaster

Hammermaster HM115 980/90183 - for details see section L

䢇 For utility work, building, construction and groundcare

䢇 Durable design, virtually maintenance free
䢇 Sealed for life accumulator
䢇 Supplied “Ready to Go” with hoses, hanger bracket and moil and chisel
䢇 Exact match of piston and tool diameter provides maximum energy transfer to the tool

䢇 GP Buckets are available in a variety of widths to increase machine versatility

䢇 A rolled top section increases structural integrity
䢇 Side plate reinforcement offers additional strength and rigidity
䢇 Replaceable wearparts increase durability and extend the working life

Part Number Width (in) Width (mm) Capacity (m3) Duty Teeth

531/99300 9 230 - Standard Standard

528/00400 12 300 - Standard Standard
528/00600 14 350 - Standard Standard
528/00800 16 400 - Standard Standard
528/01000 18 450 - Standard Standard
528/01200 24 600 - Standard Standard
528/01400 30 750 - Standard Standard

Optional weld in bucket pins 980/86024 are available on ALL the above Buckets

D.8 JCB ATTACHMENTS Issue 1 JCB ATTACHMENTS Issue 1 D.9

 2CX/2CX AIR MASTER 2CX/2CX AIR MASTER
Ditch Maintenance Bucket Compactor

D D
䢇 Side plate reinforcement offers additional strength and rigidity
䢇 Drainage holes reduce weight/density during operation 䢇 For trench reinstatement and general ground compaction
䢇 Dipper mounting ensures the operator is fully protected from the effects of vibration
Part Number Width (in) Width (mm) Capacity (m3) Duty Teeth
䢇 Connects to the high flow circuit, the unit only requires 24 lpm
980/05400 47 1200 0.12 Standard N/A
䢇 In built protection valve safeguards the unit from hydraulic pressure surges
Optional weld in bucket pins 980/86024 are available 䢇 Suitable for direct or quickhitch mount

Part Number Plate size Centrifugal force

Earth Drill 980/03200 12” x 29” (305mm x 739mm) 16.3kN (3664 lbf)

Sweeper Collector

䢇 For accurate and precise drilling

䢇 Standard 2" Hexagon drive
䢇 Maximum torque drilling power
6000Nm
䢇 Choice of standard or heavy duty
flights.
䢇 Replacement teeth and pilot bits
available for greater service life

䢇 Heavy duty canopy gives added strength to take the knocks of every day use
䢇 Floating frame system automatically follows the ground contour ensuring
sweeper output
䢇 Large diameter steel and polypropylene brush segments for superior finish
䢇 Sweeping and hopper emptying hydraulically operated from the cab
Part Number Maximum recommended standard Flight 䢇 Available with dust suppression and/or gutter brush options
980/89586 1200mm (47”) length, 900mm (36”) diameter*
Part Number Description
* See section K for details of flights
980/90515 SC210 Sweeper
980/90516 SC210 Sweeper with Water option
980/89012 Quickhitch Frame
980/89159 Gutter Brush option

For additional information on Sweeper Collectors, see section J

D.10 JCB ATTACHMENTS Issue 1 JCB ATTACHMENTS Issue 1 D.11

 2CX/2CX AIRMASTER MIDI CX
Hammermaster Manual Quickhitch

Hammermaster HM265Q 980/90241 - for details see section L

䢇 For utility work, building, construction and groundcare

䢇 Durable design, virtually maintenance free 䢇 Provides greater safety and
䢇 Sealed for life accumulator less effort for the operator
to change buckets and attachments
䢇 Supplied “Ready to Go” with hoses, hanger bracket and moil and chisel
䢇 Durable design, with harden
䢇 Excellent power to weight ratio provides maximum performance. steel jaws that keep wear to a
minimum
䢇 Mechanically operated with spring

D 䢇
loaded lock released by use of a
tommy bar
The safety lock pin prevents accidental
D
loss of bucket or attachment

Part Number Type of Quickhitch

980/00100 Manual

GP Bucket

䢇 GP Buckets are available in a variety of widths to increase machine versatility

䢇 A rolled top section increases structural integrity
䢇 Sideplate reinforcement offers additional strength and rigidity
䢇 Replaceable wearparts increase durability and extend the working life

Part Number Width (in) Width (mm) Capacity (m3) Duty Teeth

531/99300 9 230 - Standard Standard

528/00400 12 305 - Standard Standard
528/00600 14 350 - Standard Standard
528/00800 16 400 - Standard Standard
528/01000 18 450 - Standard Standard
528/01200 24 600 - Standard Standard
528/01400 30 750 - Standard Standard

D.12 JCB ATTACHMENTS Issue 1 JCB ATTACHMENTS Issue 1 D.13

 MIDI CX MIDI CX
Ditch Maintenance Bucket 6 in 1 Shovel

D D
䢇 Side plate reinforcement offers additional strength and rigidity
䢇 Drainage holes reduce weight/density during operation 䢇 Maximises loader productivity giving the operator a wider choice of options
䢇 The options are dozing, loading, digging, grabbing, spreading and grading
Part Number Width (in) Width (mm) Capacity (m3) Duty Teeth
䢇 Teeth and toeplate options for even longer service life
980/05400 47 1200 0.12 Standard N/A
䢇 Quickhitch mount for rapid changeover times increases productivity
Optional weld in bucket pins 980/86024 are available
Part Number Width (in) Width (mm) Capacity (m3) Duty Teeth

512/04400 62 1550 0.30 Standard Standard

512/10000 69 1750 0.41 Standard Standard
GP Shovel

Side Tip Shovel

䢇 Designed for maximum performance and durability

䢇 Teeth and toeplate options for even longer service life
䢇 Quickhitch mount for rapid changeover times, increases productivity

Part Number Width (in) Width (mm) Capacity (m3) Duty Teeth 䢇 Designed for safe and accurate placement of infill materials
331/12904 56 1430 0.30 General Purpose Standard 䢇 Available as LH or RH options
512/03500 62 1550 0.37 General Purpose Standard
512/07400 62 1550 0.57 GP Dirt Shovel Standard 䢇 Designed to operate from the loader auxiliary service
䢇 Allows the operator to face the traffic and reduces potential traffic hazards
䢇 Quickhitch mount for rapid changeover times increases productivity

Part Number Width (in) Width (mm) Capacity (m3) Duty Description

980/78100 63 1600 0.39 Standard Left Hand Option

980/78200 63 1600 0.39 Standard Right Hand Option

D.14 JCB ATTACHMENTS Issue 1 JCB ATTACHMENTS Issue 1 D.15

 MIDI CX MIDI CX
Construction Shovel Earth Drill

䢇 For accurate and precise drilling

䢇 Standard 2" Hexagon drive
䢇 Maximum torque drilling power
6000Nm
䢇 Choice of standard or heavy duty
flights.

D 䢇 Replacement teeth and pilot bits

available for greater service life
D
䢇 Designed for heavy duty applications
䢇 Quickhitch mount for rapid changeover times increases productivity

Part Number Width (in) Width (mm) Capacity (m3) Duty Teeth

980/88002 62 1550 0.39 Heavy Duty N/A

980/88007 69 1750 0.44 Heavy Duty N/A Part Number Maximum recommended standard Flight

980/89586 1200mm (47”) length, 900mm (36”) diameter*

* See section K for details of flights

Low Back Shovel

Industrial Forks

䢇 Designed for the operator to work with greater safety

䢇 Enables the machine to be
䢇 The lower back and longer base enables the operator to see the front edge of
utilised for loading and stacking
the toeplate during operation
䢇 Forks rated to 2 tonnes
䢇 Teeth or bolt on toeplate options
(lift governed by machine lift capacity)
䢇 Quickhitch mount for rapid changeover times
䢇 Load guard offers greater
operator safety
Part Number Width (in) Width (mm) Capacity (m3) Type Teeth
Part Number Length (in) Length (mm) Class Type
980/88001 62 1550 0.35 Low Back N/A
980/84273 62 1550 0.35 Digging N/A 531/99400 41 1050 2B Industrial Forks
512/10300 62 1550 0.35 Digging N/A 512/03000 48 1220 2B Industrial Frame
980/88000 62 1550 0.40 Low back N/A 512/03100 46 1200 N/A Industrial Loadguard

D.16 JCB ATTACHMENTS Issue 1 JCB ATTACHMENTS Issue 1 D.17

 MIDI CX MIDI CX
Industrial Grapple Kerbmaster

䢇 The safe and simple way of

manipulating kerbstones up to
180kgs in weight
䢇 Incorporates hose burst check
valve for failsafe operation
䢇 Wearparts give good gripping
properties without damage to
the kerbstone

D 䢇 Heavy duty units with independent twin ram grapple

䢇

䢇
Manual rotation offers line man
total control of kerb alignment
Maximum grab opening 170mm
D
䢇 Allows material wider than the unit width to be clamped
䢇 Bolt on toeplate options
䢇 Quickhitch mount for rapid changeover times

Part Number Width (in) Width (mm) Capacity Duty

980/88820 62 1550 912mm max opening Twin ram

980/88994 66 1690 Twin ram

Part Number Description

Muck Forks 980/A0724 Manual Rotation Kerb Grab
980/90862 Kerb Grab installation kit required

Hammermaster

Hammermaster HM165Q 980/90867 - for details see section L

䢇 For utility work, building, construction and demolition

䢇 Durable design, virtually maintenance free
䢇 Excellent power to weight ratio provides maximum performance
䢇 Sealed for life accumulator
䢇 Single or twin ram option 䢇 Supplied “Ready to Go” with hoses, hanger bracket and moil and chisel
䢇 Fitted with top grab that aids material retention
䢇 Fully Protected hydraulics
䢇 Quickhitch mount for rapid changeover times

Part Number Width (in) Width (mm) Capacity Duty

980/44600 59 1550 0.60 Single ram

980/88222 69 1700 0.75 Twin ram

D.18 JCB ATTACHMENTS Issue 1 JCB ATTACHMENTS Issue 1 D.19

 3CX/4CX 3CX/4CX
Manual Quickhitch Dedicated Hydraulic Quickhitch

䢇 Provides greater safety and less

effort for the operator to change
buckets and attachments
䢇 Durable design, with harden steel
jaws that keep wear to a minimum
䢇 Mechanically operated with spring
loaded lock released by use of a
tommy bar
䢇 The safety lock pin prevents accidental

D 䢇
loss of bucket or attachment
Hydraulic version operated fully from
within the cab 䢇 Provides greater safety and less effort for the operator to change buckets and
D
attachments
䢇 Durable design, with hardened steel jaws that keep wear to a minimum
Part Number Type of Quickhitch
䢇 The safety lock pin prevents accidental loss of bucket or attachment
980/88833 Manual
Part Number Type of Quickhitch

980/88854 Hydraulic (installation kit required see APS)

Hydraulic Quickhitch GP Bucket

䢇 GP Buckets are available in a
variety of widths to increase
machine versatility
䢇 This range has been achieved
by the use of Finite Element
Analysis throughout the entire
design process
䢇 Heavy duty box top section
and side plate reinforcement
increases structural integrity
䢇 Replaceable wearparts increase
durability and extend the
working life
䢇 Provides greater safety and less effort for the operator to change buckets and
attachments
䢇 Durable design, with hardened steel jaws that keep wear to a minimum
䢇 The safety lock pin prevents accidental loss of bucket or attachment
Part Number Width (in) Width (mm) Capacity (m3) Duty Teeth

Part Number Type of Quickhitch 980/89817* 9 230 0.040 Standard Standard

980/89818** 12 300 0.050 Standard Standard
980/89086 Hydraulic (installation kit required see APS) 980/89881 14 350 0.070 Standard Standard
980/89990 16 400 0.090 Standard Standard
980/89991 18 450 0.120 Standard Standard
980/89993 24 600 0.170 Standard Standard
980/89994 32 750 0.240 Standard Standard
980/89995 36 900 0.280 Standard Standard

* Requires 2 x Bucket Pins 990/88201

** Requires 2 x Bucket Pins 911/16600

Optional weld in bucket pin kit 993/36400 is available

D.20 JCB ATTACHMENTS Issue 1 JCB ATTACHMENTS Issue 1 D.21

 3CX/4CX 3CX/4CX
Ribbed Bucket Dedicated Bucket

䢇 Dedicated Buckets are

available in a variety of widths
䢇 GP Buckets are available in a
to increase machine versatility
variety of widths to increase
machine versatility 䢇 This range has been achieved
by the use of Finite Element
䢇 A rolled top section increases
Analysis throughout the entire
structural integrity
design
䢇 Additional wear strips fitted to
䢇 Side plate reinforcement offers
the rolled back shell offers
additional strength and rigidity
additional strength and rigidity

D 䢇 Replaceable wearparts
increase durability and extend
the working life
䢇 Replaceable wearparts increase
durability and extend the
working life D
Part Number Width (in) Width (mm) Capacity (m3) Duty Teeth

980/62600 9 230 - Standard Standard

980/62300 12 300 - Standard Standard
Part Number Width (in) Width (mm) Capacity (m3) Duty Teeth 980/62400 16 400 - Standard Standard
980/61500 18 450 - Standard Standard
980/90005 12 300 0.05 Ribbed Standard 980/61600 24 600 - Standard Standard
980/90006 14 350 0.06 Ribbed Standard 980/61700 30 750 - Standard Standard
980/90007 16 400 0.09 Ribbed Standard 980/61800 36 900 - Standard Standard
980/90008 18 450 0.12 Ribbed Standard
980/90010 24 600 0.17 Ribbed Standard These buckets are for use with dedicated Quickhitch 980/88854
980/90011 32 750 0.24 Ribbed Standard
980/90012 36 900 0.29 Ribbed Standard

Grading Bucket Dedicated Ditch Maintenance Bucket

䢇 Grading Buckets are available in a variety of widths to

increase machine versatility
䢇 Central reinforcing plate gives added strength and
䢇 Side plate reinforcement offers additional strength and rigidity
rigidity, and drainage holes to reduce weight/density
during operation 䢇 Drainage holes reduce weight/density during operation

Part Number Width (in) Width (mm) Capacity (m3) Duty Teeth Part Number Width (in) Width (mm) Capacity (m3) Duty Teeth

980/86061 60 1500 - Standard N/A 980/66000 60 1500 - Standard N/A

980/86060 72 1800 - Standard N/A
These buckets are for use with dedicated Quick Hitch 980/88854
Optional weld in bucket pin kit 993/36400 is available
Options: Weld in bucket pin kit 993/36400 , 9”Bucket Pin 990/88201, 12” Bucket Pin 911/16600

D.22 JCB ATTACHMENTS Issue 1 JCB ATTACHMENTS Issue 1 D.23

 3CX/4CX 3CX/4CX
Quickhitch Hanger Bracket Kerbmaster

䢇 The safe and simple way of

manipulating kerbstones up to
180kgs in weight
䢇 Incorporates hose burst check
valve for failsafe operation
䢇 Wearparts give good gripping
properties without damage to
the kerbstone

D 䢇

䢇
Available with manual or full
hydraulic rotation options
Maximum grab opening 170mm
D
Part Number Application

335/08502 Suitable for Kerb Grab and Earthdrill

Earth Drill Part Number Type Installation Kit

980/A0724 Manual 980/89941

980/A0725 Hydraulic 980/89942

䢇 For accurate and precise drilling

䢇 Standard 2" Hexagon drive Patch Planer
䢇 Maximum torque drilling power
6000Nm
䢇 Precise planing with
䢇 Choice of standard or heavy depth adjustment up to
duty flights 115mm
䢇 Replacement teeth and pilot bits 䢇 Full 400mm width cutting
available for greater service life drum
䢇 Hydraulic flow required is
90 - 200 l/min
䢇 Easily adjustable wheel
configuration allows planing
to kerb/grid edge
䢇 Replacement tooth picks
are available to extend unit
life

Part Number Maximum recommended standard Flight

980/89587 1200mm (47”) length, 900mm (36”) diameter*

* See section K for details of flights

Part Number Description

980/88802 Patch Planer

D.24 JCB ATTACHMENTS Issue 1 JCB ATTACHMENTS Issue 1 D.25

 3CX/4CX 3CX/4CX
Compactor Hammermaster

Hammermaster HM385Q 980/90239 - for details see section L

䢇 For trench reinstatement and Hammermaster HM495Q 980/90245 - for details see section L
general ground compaction
䢇 For utility work, building, construction and demolition
䢇 Dipper mounted ensures the
䢇 Durable design, virtually maintenance free
operator is fully protected
from the effects of vibration 䢇 Excellent power to weight ratio provides maximum performance
䢇 Connects to the high flow 䢇 Sealed for life accumulator
circuit, the unit only requires 䢇 Supplied “Ready to Go” with hoses, hanger bracket and moil and chisel
24 lpm

D 䢇

䢇
In built protection valve
safeguards the unit from
hydraulic pressure surges
Suitable for direct or quickhitch
Pole Planter D
mount 䢇 Full hydraulic clamping for the
safe handling and planting of
poles
䢇 Side roller option allows lateral
movement on the pole before
Part Number Description grabbing
980/32000 Compactor 䢇 Mounted on the loader arms to
maintain machine stability and
operator safety
Sweeper Collector 䢇 Connects to the loader auxiliary
service, a 12 volt electric supply
required to operate the diverter
valve
䢇 Optional A Frame mounted to
the top of the stabiliser legs
offers greater stability when
carrying the pole over a
distance

Part Number To fit Capacity (kg) Pole Dia (mm) Weight (kg) Description

980/68000 3CX 1500 150 - 450 650 Pole Planter with side roller*
980/88428 4CX 1700 300 - 580 900 Pole Planter with side roller**

* Requires harness (P12 - 980/88430, P21 - 980/89451)

䢇 Heavy duty canopy gives added strength to take the knocks of every day use
** Requires harness (P8 - 980/69900, P12 - 980/88430, P21 - 980/89451)
䢇 Floating Frame system automatically follows the ground contour ensuring
sweeper output Options: A frame (M300001 - M460000) 980/39700
䢇 Large diameter steel and polypropylene brush segments for superior finish A frame (M460001 on) 980/88429

䢇 Sweeping and hopper emptying hydraulically operated from the cab

䢇 Available with dust suppression and/or gutter brush options

Part Number Width (in) Width (mm) Type Also required for 3CX

980/90507 96 2400 SC240 Mounting frame 980/90417

980/90508 96 2400 SC240 with integral tank Mounting frame 980/90417

Options: Pallet fork mounting frame 980/90418, Gutter brush (left or right hand) 980/89159

D.26 JCB ATTACHMENTS Issue 1 JCB ATTACHMENTS Issue 1 D.27