Water Pump

Etanorm-R

Fixed Speed / Variable Speed

50 Hz / 60 Hz

Type Series Booklet

Legal information/Copyright
Type Series Booklet Etanorm-R

All rights reserved. The contents provided herein must neither be distributed, copied, reproduced,
edited or processed for any other purpose, nor otherwise transmitted, published or made available to a
third party without the manufacturer's express written consent.
Subject to technical modification without prior notice.

© KSB SE & Co. KGaA, Frankenthal 30/09/2020

 Contents

Contents
Centrifugal Pumps with Shaft Seal..................................................................................................................  4
Water Pump................................................................................................................................................................................ 4
Etanorm-R............................................................................................................................................................................. 4
Main applications........................................................................................................................................................... 4
Fluids handled ................................................................................................................................................................ 4
Further information on fluids handled................................................................................................................... 4
Related documents ........................................................................................................................................................ 4
Operating data............................................................................................................................................................... 4
Design details ................................................................................................................................................................. 4
Further information on the drive............................................................................................................................ 5
Further information on the shaft seal .................................................................................................................... 5
Further information on bearings ............................................................................................................................ 5
Further information on the coupling ..................................................................................................................... 5
Designation .................................................................................................................................................................... 6
Materials ......................................................................................................................................................................... 7
Coating and preservation .............................................................................................................................................. 8
Product benefits ............................................................................................................................................................. 8
Product information ...................................................................................................................................................... 8
Product information as per Regulation No. 1907/2006 (REACH) .......................................................................... 8
Product information as per Regulation No. 547/2012 (for water pumps with a maximum shaft power of
150 kW) implementing "Ecodesign" Directive 2009/125/EC ................................................................................. 8
Certifications .................................................................................................................................................................. 8
Standards ........................................................................................................................................................................ 8
Acceptance tests and warranty ..................................................................................................................................... 8
Overview of product features / selection tables .......................................................................................................... 9
Overview of variants ................................................................................................................................................ 9
Overview of fluids handled ................................................................................................................................... 10
Overview of materials............................................................................................................................................ 11
Drive........................................................................................................................................................................ 11
Shaft seal ................................................................................................................................................................ 12
Bearings .................................................................................................................................................................. 13
Coupling / coupling guard..................................................................................................................................... 13
Overview of functions............................................................................................................................................ 14
Pressure limits and temperature limits ....................................................................................................................... 15
Technical data .............................................................................................................................................................. 16
Pump ....................................................................................................................................................................... 16
Permissible forces and moments at the pump nozzles........................................................................................ 17
Noise characteristics ............................................................................................................................................... 17
Selection charts ............................................................................................................................................................ 18
Etanorm-R (fixed speed version), n = 1750 rpm ................................................................................................... 18
Etanorm-R (fixed speed version), n = 1450 rpm ................................................................................................... 18
Etanorm-R (fixed speed version), n = 1160 rpm ................................................................................................... 19
Etanorm-R (fixed speed version), n = 960 rpm ..................................................................................................... 19
Dimensions ................................................................................................................................................................... 20
Pump dimensions ................................................................................................................................................... 20
Dimensions of the pump set with foundation ..................................................................................................... 21
Connections .................................................................................................................................................................. 25
Flange design ............................................................................................................................................................... 25
Interchangeability of pump components ................................................................................................................... 26
Recommended spare parts stock for 2 years' operation to DIN 24296..................................................................... 27
Scope of supply ............................................................................................................................................................ 27
General assembly drawings ......................................................................................................................................... 28
General assembly drawing with list of components............................................................................................ 28

3
 Centrifugal Pumps with Shaft Seal
Water Pump

Centrifugal Pumps with Shaft Seal Related documents

Information/documents
Water Pump
Document Reference number
Characteristic curves booklet (50 Hz) 1311.45

Etanorm-R Fixed speed version

Characteristic curves booklet (60 Hz) 1311.46
Fixed speed version
Type series booklet 4075.53
KSB SuPremE
Type series booklet 4074.5
PumpDrive 2 / PumpDrive 2 Eco
Type series booklet 4073.5
PumpDrive R
Type series booklet 4072.5
PumpMeter

Operating data
Operating properties
Characteristic Value
50 Hz 60 Hz
Flow rate Q m3/h] ≤ 1900 ≤ 2285
Head H [m] ≤ 101 ≤ 88
Fluid temperature T [°C] ≥ -30 ≥ -30
The product illustrated as an example may include options
incurring a surcharge. ≤ +140 ≤ +140
Operating pressure p [bar] ≤ 16 ≤ 16

Main applications
▪ Water supply systems Design details
▪ Spray irrigation systems
Design
▪ Drainage systems
▪ Volute casing pump
▪ Air-conditioning systems
▪ Horizontal installation
▪ Fire-fighting systems
▪ Back pull-out design
▪ General irrigation systems
▪ Single-stage
▪ Heating systems
▪ Two-stage (size 125-500/2)
▪ Axial thrust balanced by discharge-side casing wear ring
Fluids handled and balancing holes
▪ Seawater ▪ Replaceable casing wear rings
▪ Brackish water ▪ Fixed speed version (without PumpDrive 2 /
PumpDrive 2 Eco / PumpDrive R) / variable speed version
▪ Drinking water (with PumpDrive 2 / PumpDrive 2 Eco / PumpDrive R)
▪ High-temperature hot water
▪ Service water Pump casing
▪ Fire-fighting water ▪ Radially split volute casing

▪ Brine ▪ Volute casing with integrally cast pump feet

▪ Cleaning agents ▪ Baseframe made of welded channel sections

▪ Condensate ▪ Replaceable casing wear rings

▪ Oils
1211.5/16-EN

Drive (fixed speed version)

Standard design:
Further information on fluids handled ▪ KSB/Siemens surface-cooled IEC frame three-phase
Overview of fluids handled (ð Page 10) squirrel-cage motor
▪ Efficiency class IE1 (size 71/80) / IE3 (from size 90) to
IEC 60034-30
▪ Rated voltage (50 Hz) 400 V / 690 V ≥ 3.00 kW
▪ Rated voltage (60 Hz) 460 V / -  ≥ 3.00 kW
▪ Type of construction IM B3

4 Etanorm-R
 Centrifugal Pumps with Shaft Seal
Water Pump

▪ Enclosure IP55 ▪ Self-cooling frequency inverter of modular design for the

continuously variable speed control of asynchronous
▪ Duty cycle: continuous duty S1 motors and synchronous reluctance motors, such as KSB
▪ Thermal class F with temperature sensor, 1 PTC thermistor SupremE motors or permanent magnet synchronous
(size 80/90) / 3 PTC thermistors (from size 100) motors, by means of analog standard signals, a field bus or
the control panel
Explosion-proof design:
▪ Identical design of frequency inverter for the mounting
▪ KSB surface-cooled IEC three-phase current squirrel-cage types wall mounting and cabinet mounting
motor
▪ Mains voltage 3~ 380 V AC -10 % to 480 V AC +10 %
▪ Efficiency class IE2 / IE3 to IEC 60034-30
▪ Extended mains voltage range (on request)
▪ Rated voltage (50 Hz) 400 V / 690 V ≥ 3.30 kW
▪ Mains frequency 50 Hz to 60 Hz ± 2 %
▪ Rated voltage (60 Hz) 460 V / - ≥ 3.30 kW
▪ Extended power range with a nominal power of 110 kW
▪ Type of construction IM B3 (standard) or 1400 kW (on request)
▪ Enclosure IP55 PumpMeter:
▪ Duty cycle: continuous duty S1 ▪ Intelligent pressure transmitter for pumps, with on-site
display of measured values and operating data
▪ II 3G Ex ec IIC T3 Gc
▪ For recording the load profile of the pump
▪ II 2G Ex eb IIC T3 Gb
▪ Supplied completely assembled and parameterised for the
▪ II 2G Ex db (eb) IIB T4 Gb individual pump
▪ II 2G Ex db (eb) IIC T4 Gb KSB Guard
▪ System for monitoring the pump’s condition by means of
temperature and vibration sensors
Drive (variable speed version)
▪ Measured values and operating data may be retrieved via
KSB SuPremE motor: the KSB Guard app and the web portal at any time.
▪ Surface-cooled KSB SuPremE motor, IEC-compatible,
magnetless synchronous reluctance motor (PumpDrive
required) Shaft seal
▪ Efficiency class IE4/IE5 to IEC TS 60034-30-2:2016 ▪ Cartridge seal

▪ Mounting points to EN 50347:2001 ▪ Standardised mechanical seal to EN 12756

▪ Envelope dimensions to DIN VDE 42673-4:2011-07 ▪ Gland packing

▪ Type of construction IM B3

Impeller type
▪ Enclosure IP55
▪ Closed radial impeller with multiply curved vanes
▪ Duty cycle: continuous duty S1
Sizes 200-250, 250-300, 300-340:
▪ Thermal class F with temperature sensor, 3 PTC thermistors
▪ Mixed flow impeller
▪ Shaft centreline height 71 to 225 mm
▪ Rated power 4 kW to 45 kW Bearings
▪ Rated speed 1500 min⁻¹ ▪ Grease-packed deep groove ball bearing
▪ Frequency 50 Hz / 60 Hz (PumpDrive input) ▪ Oil-lubricated deep groove ball bearing
▪ Voltage 380 V to 480 V (PumpDrive input)
KSB SuPremE X1: Direction of rotation
▪ With terminal box for connecting to PumpDrive 2 or ▪ Clockwise, viewed from the drive end.
PumpDrive R for mounting on walls and in control
cabinets
KSB SuPremE X2: Further information on the drive
▪ Equipped for being fitted with a motor-mounted (ð Page 11)
PumpDrive 2
PumpDrive 2 / PumpDrive 2 Eco: Further information on the shaft seal
▪ Self-cooling frequency inverter of modular design for the
(ð Page 12)
continuously variable speed control of asynchronous
motors and synchronous reluctance motors by means of
analog standard signals, a field bus or the control panel
Further information on bearings
▪ Identical design of frequency inverter for motor
1211.5/16-EN

mounting, wall mounting and cabinet mounting (ð Page 13)

▪ Mains voltage 3~ 380 V AC -10 % to 480 V AC +10 %
▪ Mains frequency 50 Hz to 60 Hz ± 2 % Further information on the coupling
PumpDrive R: (ð Page 13)

Etanorm-R 5
 Centrifugal Pumps with Shaft Seal
Water Pump

Designation

Example: Etanorm-R X G C1 300-400

Designation key

Code Description
Etanorm-R X Type series (fire-fighting pump)
G Casing material
G Cast iron
S Nodular cast iron
C1 Impeller material
C1 Stainless steel
G Cast iron
M Bronze
300 Nominal discharge nozzle diameter [mm]
400 Nominal impeller diameter [mm]
- Additional code
-1) Single-stage
.1 Single-stage, modified version
/2 Two-stage

1211.5/16-EN

1 Blank

6 Etanorm-R
 Centrifugal Pumps with Shaft Seal
Water Pump

Materials
Symbols key
Symbol Description
✘ Standard
o Optional
- Version not available / not feasible

Overview of available materials

Part No. Description Material Material variant

(ð Page 28) GG GM GC1 SG SM SC1
102 Volute casing Grey cast iron EN-GJL-250 / A 48 Cl. 35B ✘ ✘ ✘ - - -
Nodular cast iron EN-GJS-400 / - - - ✘ ✘ ✘
A536 Gr. 60-40-18
230 Impeller Grey cast iron EN-GJL-250 / A 48 Cl. 35B ✘ - - ✘ - -
Bronze CC480K-GS / B30 C90700 - ✘ - - ✘ -
Stainless steel 1.4408 / A743 Gr. CF8 M - - ✘ - - ✘
161 Casing cover Grey cast iron JL1040 / grey cast iron ✘ ✘ ✘ - - -
A 48 Cl. 35B
Nodular cast iron JS1030 / A536 Gr. 60-40-18 - - - ✘ ✘ ✘
171 Diffuser2) Grey cast iron EN-GJL-250 / A 48 Cl. 35B ✘ - - - - -
Grey cast iron JL1040 / grey cast iron - - - ✘ - -
A 48 Cl. 35B
Bronze CC480K-GS / B30 C90700 - ✘ - - ✘ -
Grey cast iron EN-GJL-250 / A 48 Cl. 35B - - ✘ - - ✘
183 Support foot Grey cast iron EN-GJL-250 / A 48 Cl. 35B ✘ ✘ ✘ ✘ ✘ ✘
210 Shaft Tempered steel C45+N ✘ ✘ ✘ ✘ ✘ ✘
Chrome steel 1.4057+QT800 o o o o o o
502.01 Casing wear ring, suction Grey cast iron EN-GJL-250 / CI ✘ ✘ ✘ ✘ ✘ ✘
side Bronze CC495K-GS o o o o o o
502.02 Casing wear ring, discharge Grey cast iron EN-GJL-250 / CI ✘ ✘ ✘ ✘ ✘ ✘
side Bronze CC495K-GS o o o o o o
523 Shaft sleeve Chrome nickel molybdenum steel 1.4571 ✘ - - - - -
524 Shaft protecting sleeve Chrome molybdenum steel 1.4122 - ✘ ✘ ✘ ✘ ✘
330 Bearing bracket Grey cast iron EN-GJL-250 / A 48 Cl. 35B ✘ ✘ ✘ ✘ ✘ ✘
360.1/.2 Bearing cover Grey cast iron EN-GJL-250 / A 48 Cl. 35B ✘ ✘ ✘ ✘ ✘ ✘
400.1/.9 Gasket DPAF ✘ ✘ ✘ ✘ ✘ ✘
412 O-ring EPDM80 ✘ ✘ ✘ ✘ ✘ ✘
1211.5/16-EN

2 For size 125-500/2 only

Etanorm-R 7
 Centrifugal Pumps with Shaft Seal
Water Pump

Coating and preservation Certifications

▪ Coating and preservation to KSB standard
Overview
▪ Special coatings on request
Label Effective in: Comment
All countries Certified quality management to
ISO 9001
Product benefits
▪ Operating costs reduced by trimming the nominal impeller
diameter to match the specified duty point
▪ Little wear, low vibration levels and excellent smooth Standards
running characteristics thanks to good suction
performance and virtually cavitation-free operation across Applicable standards
a wide operating range
▪ Pioneering energy efficiency by variable speed operation Standard Description
in combination with PumpDrive. When used in DIN EN 809 Pumps and pump sets for liquids –
combination with the KSB SuPremE motor, the pump Common safety requirements
achieves efficiency level IE4/IE5 to IEC TS 60034-30-2:2016 DIN EN 12756 Mechanical seals – Main dimensions,
already today. designation and material codes
▪ Easy to dismantle due to back pull-out design; no need to DIN EN ISO 12100 Safety of machinery - General principles for
remove the pump casing from the piping design - Risk assessment and risk reduction

Product information Acceptance tests and warranty

Hydraulic test:
Product information as per Regulation No. ▪ To ISO 9906 Cl. 2A
1907/2006 (REACH)
▪ Non-witnessed
For information as per chemicals Regulation (EC) No. 1907/2006
(REACH), see http://www.ksb.com/reach. ▪ Scope of testing: Q, H, P, η, H0
Hydraulic test:
Product information as per Regulation No. 547/2012 ▪ To ISO 9906 Cl. 2A
(for water pumps with a maximum shaft power of ▪ Non-witnessed
150 kW) implementing "Ecodesign" Directive 2009/125/
▪ Scope of testing: Q, H, P, η, H0, NPSH at duty point
EC
▪ Minimum efficiency index: see data sheet Hydraulic test:

▪ The benchmark for the most efficient water pumps is MEI ▪ To ISO 9906 Cl. 2A
≥ 0.70. ▪ Witnessed
▪ Year of construction: see data sheet ▪ Scope of testing: Q, H, P, η, H0
▪ Manufacturer’s name or trade mark, commercial Hydraulic test:
registration number and place of manufacture: see data
sheet or order documentation ▪ To ISO 9906 Cl. 2A
▪ Product’s type and size identificator: see data sheet ▪ Witnessed
▪ Hydraulic pump efficiency (%) with trimmed impeller: see ▪ Scope of testing: Q, H, P, η, H0, NPSH at duty point
data sheet
Final inspection:
▪ Pump performance curves, including efficiency
characteristics: see documented characteristic curve ▪ Inspection certificate 3.1. B to EN 10204 for hydrostatic
test of complete pump
▪ The efficiency of a pump with a trimmed impeller is
usually lower than that of a pump with full impeller Materials inspection and testing:
diameter. Trimming of the impeller will adapt the pump ▪ Test report 2.1 to EN 10204
to a fixed duty point, leading to reduced energy
consumption. The minimum efficiency index (MEI) is based Materials inspection and testing:
on the full impeller diameter. ▪ Test report 2.2 to EN 10204
▪ Operation of this water pump with variable duty points
Warranty:
may be more efficient and economic when controlled, for
example, by the use of a variable speed drive that matches ▪ Warranties are given within the scope of the valid terms
the pump duty to the system. and conditions of sale and delivery.
▪ Information relevant for disassembly, recycling or disposal
at end of life: see installation/operating manual
▪ Information on benchmark efficiency or benchmark
1211.5/16-EN

efficiency graph for MEI = 0.70 (0.40) for the pump based

on the model shown in the Figure are available at: http://
www.europump.org/efficiencycharts

8 Etanorm-R
 Centrifugal Pumps with Shaft Seal
Water Pump

Overview of product features / selection tables

Overview of variants
Other designs on request

Symbols key
Symbol Description
✘ Standard
- Version not available / not feasible

Overview of Etanorm-R variants

T Main applications

General irrigation systems

[°C]

Air-conditioning systems
Spray irrigation systems
Water supply systems
Fire-fighting systems
102 / Volute casing

Drainage systems
Heating systems
230 / Impeller
Design

GG Grey cast iron EN-GJL-250 / A 48 Cl. Grey cast iron EN-GJL-250 / A 48 Cl. ≥ -30 - ≤ +140 ✘ ✘ ✘ ✘ ✘ ✘ ✘
35B 35B
GM Grey cast iron EN-GJL-250 / A 48 Cl. Bronze CC480K-GS / B30 C90700 ≥ -30 - ≤ +140 ✘ ✘ ✘ ✘ ✘ ✘ ✘
35B
GC1 Grey cast iron EN-GJL-250 / A 48 Cl. Stainless steel 1.4408 / A743 Gr. CF8 M ≥ -30 - ≤ +140 ✘ ✘ ✘ ✘ ✘ ✘ ✘
35B
1211.5/16-EN

Etanorm-R 9
 Centrifugal Pumps with Shaft Seal
Water Pump

Overview of fluids handled

KSB EasySelect, selection software for all applications
KSB EasySelect is a comprehensive selection tool for all applications. It guides users to an optimal solution for their
projects by offering a fast, easy and user-friendly way to select and configure pumps and valves. All that is required
are some project-specific criteria and a few minutes’ time. The tool systematically guides the user through KSB’s
wide range of products to the right product for the application at hand.

https://www.ksb.com/ksb-en/Select_your_pumps_and_valves/ksb-easyselect/
Other fluids upon request.

Symbols key
Symbol Description
✘ Standard
- Version not available / not feasible

Excerpt from the overview of fluids handled with associated material variants

Fluid handled T3) Materials Shaft seal

Maximum
Minimum

Q1Q1VGG

Q1Q1EGG
Q1BVGG

Q1AEGG

Q1BEGG

RT/P NA

RT/P NB
GC1

SC1
GM

SM
GG

SG
[°C]
Fire-fighting water 0 60 ✘ ✘ ✘ ✘ ✘ ✘ - - - ✘ ✘ - -
Heating water ≤ 100 °C, to VDI 2035 0 100 ✘ ✘ ✘ ✘ ✘ ✘ - - - ✘ ✘ - -
High-temperature hot water, to VdTüV 1466 0 140 ✘ ✘ ✘ ✘ ✘ ✘ - - - ✘ ✘4) - -
Condensate, to VdTüV 1466 0 140 ✘ ✘ ✘ ✘ ✘ ✘ - - - ✘ ✘4) - -
Condensate, AF composition 0 140 ✘ ✘ ✘ ✘ ✘ ✘ - - - ✘ ✘4) - -
4)
Vapour condensate 0 140 ✘ ✘ ✘ ✘ ✘ ✘ - - - ✘ ✘ - -
Cooling water, closed cooling circuit 0 70 - ✘ ✘ - ✘ ✘ - ✘ - - - - -
Cooling water, open cooling circuit 0 70 - ✘ ✘ - ✘ ✘ - ✘ - - - - -
River water 0 60 ✘ ✘ ✘ ✘ ✘ ✘ - ✘ - - - - -
Surface water 0 60 ✘ ✘ ✘ ✘ ✘ ✘ - ✘ - - - - -
Lake water 0 60 ✘ ✘ ✘ ✘ ✘ ✘ - ✘ - - - - -
Dam water 0 60 ✘ ✘ ✘ ✘ ✘ ✘ - ✘ - - - - -
Raw water 0 60 ✘ ✘ ✘ ✘ ✘ ✘ - ✘ - - - - -
Grey water 0 60 ✘ ✘ ✘ ✘ ✘ ✘ - ✘ - - - - -
Swimming pool water 0 60 ✘ ✘ ✘ ✘ ✘ ✘ - - - - ✘ - -
Brewing water 0 60 ✘ ✘ ✘ ✘ ✘ ✘ - - - - ✘ - -
Ice water (brewery) 0 60 ✘ ✘ ✘ ✘ ✘ ✘ - - - - ✘ - -
Tap water 0 60 ✘ ✘ ✘ ✘ ✘ ✘ - - - - ✘ - -
Drinking water 0 60 ✘ ✘ ✘ ✘ ✘ ✘ - - - - ✘ - -
Hot water (brewery) 0 60 ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ - - - - -
Clean water (brewery) 0 60 ✘ ✘ ✘ ✘ ✘ ✘ - ✘ - - ✘ ✘ ✘
Ethylene glycol base anti-freeze (concentration: 0 110 ✘ ✘ ✘ ✘ ✘ ✘ - - ✘ - - ✘ ✘
50 %)
Propylene glycol base anti-freeze (concentration: 0 110 ✘ ✘ ✘ ✘ ✘ ✘ - - ✘ - - ✘ ✘
50 %)
Calcium chloride base cooling brine 0 25 ✘ ✘ - ✘ ✘ - - - ✘ - - ✘ ✘
(concentration: ≤ 25.7 %)
Ethylene glycol 0 80 ✘ ✘ ✘ ✘ ✘ ✘ - - - - ✘ ✘ ✘
Condenser water (sugar production) 0 60 ✘ - ✘ ✘ - ✘ - - - - ✘ ✘ ✘
1211.5/16-EN

Olive oil 10 90 ✘ - ✘ ✘ - ✘ ✘ - - - - ✘ ✘
Petrol 0 30 ✘ ✘ ✘ ✘ ✘ ✘ ✘ - - - - - -
Fuel oil 0 60 ✘ ✘ ✘ ✘ ✘ ✘ ✘ - - - - - -
Methanol 0 60 ✘ ✘ ✘ ✘ ✘ ✘ - - - - ✘ - -

3 T = fluid temperature
4 Fluid temperature ≤ 110 °C

10 Etanorm-R
 Centrifugal Pumps with Shaft Seal
Water Pump

Overview of materials
Symbols key
Symbol Description
✘ Standard
- Version not available / not feasible

Material variants available

Etanorm-R Material variant
GG GM GC1 SG SM SC1
125-500/2 ✘ ✘ ✘ ✘ ✘ ✘
150-500.1 ✘ ✘ ✘ ✘ ✘ ✘
200-250 ✘ ✘ ✘ ✘ ✘ ✘
200-260 ✘ ✘ ✘ ✘ ✘ ✘
200-330 ✘ ✘ ✘ ✘ ✘ ✘
200-400 ✘ ✘ ✘ ✘ ✘ ✘
200-500 ✘ ✘ ✘ ✘ ✘ ✘
250-300 ✘ ✘ ✘ ✘ ✘ ✘
250-330 ✘ ✘ ✘ ✘ ✘ ✘
250-400 ✘ ✘ ✘ ✘ ✘ ✘
250-500 ✘ ✘ ✘ ✘ ✘ ✘
300-340 ✘ ✘ ✘ ✘ ✘ ✘
300-360 ✘ ✘ ✘ ✘ ✘ ✘
300-400 ✘ ✘ ✘ ✘ ✘ ✘
300-500 ✘ ✘ ✘ ✘ ✘ ✘

Drive

Selection table: drive5)

Feature KSB SIEMENS
Motor enclosure IP55 IP55
Thermal class F to IEC 34-1 F to IEC 34-1
Rated voltage 400 V / 690 V 400 V / 690 V
Motor material Grey cast iron Grey cast iron
Efficiency class IE3 to IEC 60034-30 IE3 to IEC 60034-30
Terminal box position 360° 360° / 45°
Frequency of starts ≤ 12 kW 15 starts/h 15 starts/h
Frequency of starts ≤ 100 kW 12 starts/h 12 starts/h
Frequency of starts > 100 kW 5 starts/h 5 starts/h
1211.5/16-EN

5 The cooling air of the electric motor used to drive the pump must flow in axial direction towards the pump end. Air velocity ≥
3 m/s, measured in the area of the drive-side bearing end plate.

Etanorm-R 11
 Centrifugal Pumps with Shaft Seal
Water Pump

Shaft seal
Overview of gland packings
Feature Gland packing design
Na Nb
Illustration

1211:57/2 1211:4/3

Application Pure fluids handled in suction lift operation, or Fluids handled with an inlet pressure > 0.5 bar in
with an inlet pressure ≤ 0.5 bar in suction head suction head operation, also malodorous fluids
operation (e.g. ammonium hydroxide, petrol, benzene and
lubricating oils, if the pump is installed
outdoors).
Fluid temperature -30 °C to +140 °C -30 °C to +140 °C
Barrier fluid Internal barrier fluid No barrier fluid

l
d1
da

D01023

Fig. 1: Dimensions of the gland packing chamber

Dimensions of the gland packing chamber

Shaft unit Gland packing chamber Packing rings / lantern
d1 da l ring
[mm] [mm] [mm] Quantity
65 80 105 80 4/1

Overview of mechanical seals

Feature KSB 4EB KSB 4ES Burgmann M32 N-75 R Crane 59U
Illustration

l1N l1N
d1

d1

D01039 D01039

Application Cartridge seal, without shaft protecting sleeve, -

without seal cover
Fluid temperature -30 °C to +140 °C -20 °C to +110 °C
Operating pressure Dynamic: 16 bar 16 bar
Approval WRAS, ACS
Code Q1BVGG: -20 °C to +110 °C BSVGG: Q1Q1TGG/BP:
-20 °C to +110 °C -20 °C to +110 °C
Q1BEGG: -20 °C to +110 °C BQ1TGG/BP:
Q1Q1VGG: -20 °C to +110 °C -20 °C to +110 °C
1211.5/16-EN

Q1Q1EGG: -20 °C to +110 °C

Q1AEGG: -30 °C to +140 °C
Operating mode Without circulation Internal circulation
Direction of rotation Independent Clockwise
Mechanical seal Balanced Unbalanced

12 Etanorm-R
 Centrifugal Pumps with Shaft Seal
Water Pump

Bearings
Selection table: bearings

Feature Standard Optional

Pump end Drive end Pump end Drive end
Design Deep groove ball bearing Deep groove ball bearing
Material 6413 C3 with Nilos ring JV6) 6413 C3
Lubrication type Grease-lubricated Oil-lubricated
Lubricant High-quality lithium-soap grease Mineral oil
Lubricant change Every 15,000 operating hours; at least once within Every 3000 operating hours; at least once a year8)
intervals two years7)
Bearing temperature ≤ 90 °C9) ≤ 90 °C9)
(measured on the
outside of the bearing
bracket)
Bearing bracket WE 65 WE 65

Key to designation of bearing bracket

Code Description
WE Bearing bracket: version for heat transfer fluids
65 Size code (based on dimensions of seal chamber and shaft end)

Coupling / coupling guard

Selection table: coupling

Feature N coupling NH coupling Rotex ZS-DKM-H

Design Flexible coupling
Spacer sleeve - ✘ ✘

Selection table: coupling guard

Feature Standard Optional

Design Coupling guard Coupling guard
Description Lightweight
Not designed to support a person's weight
Without support piece
Guard/ring made of galvanised solid Non-sparking, made of brass
unperforated sheet metal
- Not designed to support a person's weight
- Mounted on bearing bracket
1211.5/16-EN

6 To DIN 625
7 Under unfavourable operating conditions (e.g. high room temperature, high atmospheric humidity, dust-laden air, aggressive
industrial atmosphere etc.) check the bearings earlier and clean and re-lubricate them if required.
8 The first oil change should be carried out after 300 operating hours.
9 Bearing temperature may exceed room temperature by up to 50 °C but must never rise above 90 °C.

Etanorm-R 13
 Centrifugal Pumps with Shaft Seal
Water Pump

Overview of functions
Overview of functions

Functions / firmware PumpDrive 2 PumpDrive 2 Eco

Protective functions
Thermal motor protection ✘ ✘
Mains voltage monitoring ✘ ✘
Phase failure, motor side ✘ ✘
Short-circuit monitoring, motor side (phase to phase and phase to earth) ✘ ✘
Dynamic overload protection by speed limitation (i2t control) ✘ ✘
Resonant frequency suppression ✘ ✘
Broken wire detection (live zero) ✘ ✘
Protection against dry running and hydraulic blockage (sensorless due to learning ✘ ✘
function)
Dry running protection (external control signal) ✘ ✘
Operating point estimation and characteristic curve control ✘ ✘
Open-loop control
Open-loop control mode ✘ ✘
Closed-loop control
Closed-loop control mode via integrated PID controller ✘ ✘
Pressure control / differential pressure control (∆p const) ✘ ✘
Pressure control / differential pressure control with dynamic pressure compensation ✘ ✘
(∆p var)
Flow rate control ✘ ✘
Sensorless differential pressure control (∆p const) in a single-pump configuration ✘ ✘
Sensorless differential pressure control with dynamic pressure compensation ✘ ✘
(∆p var) in a single-pump configuration
Sensorless flow rate control ✘ ✘
Level control ✘ ✘
Temperature control ✘ ✘
Alternative setpoint ✘ -
Operation and monitoring (display)
Measured value display (pressure, head, speed, electric power, motor voltage, ✘ ✘
motor current, torque)
Fault history ✘ ✘
Operating hours counter ✘ ✘
Fault reporting via relay ✘ ✘
Frequency inverter functions
Programmable start ramps and stop ramps ✘ ✘
Field-oriented control (vector control), V/f control ✘ ✘
Configurable motor control method (asynchronous motor, KSB SuPremE) ✘ ✘
Automatic motor adaptation (AMA) ✘ ✘
Motor standstill heater ✘ ✘
Manual-0-automatic mode ✘ ✘
External OFF ✘ ✘
External minimum speed ✘ ✘
Sleep mode (stand-by mode) ✘ ✘
Energy savings meter ✘ -
Pump functions
Flow rate estimation ✘ ✘
M12 module with PumpMeter bus connection ✘ ✘
M12 module for dual-pump configuration ✘ ✘
M12 module for multiple pump configuration with up to 6 pumps ✘ ✘
1211.5/16-EN

Functional check run ✘ ✘

Deragging ✘ ✘
Integrated dual-pump configuration (1×100 % with redundant pump or 2×50 % ✘ ✘
without redundant pump)
Multiple pump configuration with up to 6 pumps ✘ ✘
Waste water function: start-up at maximum speed ✘ -
Waste water function: rinsing function ✘ -
Operation

14 Etanorm-R
 Centrifugal Pumps with Shaft Seal
Water Pump

Functions / firmware PumpDrive 2 PumpDrive 2 Eco

Control panel ✘ ✘10)
Commissioning wizard ✘ ✘11)
Favourites list ✘ -
Service interface ✘ ✘

Pressure limits and temperature limits

Test pressure limits and temperature limits

Pressure limits and temperature limits as a function of material variant
Material variant Fluid temperature Test pressure12)
[°C] [bar]
GG, GM, GC1 -30 to +140 ≤ 15
SG, SM, SC1 ≤ 140 ≤ 24

In-service pressure limits and temperature limits

18
P [bar]
16
SG, SM,
SC1
14

12

10
GG, GM,
GC1
8

6
-30 0 70 120 140
T [°C]

Fig. 2: In-service pressure limits and temperature limits as a

13)
function of material variant

Inlet pressure
The maximum inlet pressure is limited by the permissible pump discharge pressure p2.

Test pressure
1.5 x nominal pressure
1211.5/16-EN

10 Some functions can only be parameterised and/or displayed using the KSB ServiceTool (see operating manual).
11 Only available via KSB ServiceTool or app
12 The casing components are checked for leakage by means of internal pressure tests to AN 1897/75-03D00 with water.
13 The sum of inlet pressure and shut-off head must not exceed the values indicated in the diagram.

Etanorm-R 15
 Centrifugal Pumps with Shaft Seal
Water Pump

Technical data

Pump
Technical data

Volumetric pump content

Etanorm-R Impeller n J Material variant
Nominal diameter GG, SG GM, SM, GC1,
SC1
Number of blades
Outlet width

Free passage

Maximum

Maximum
Minimum

Minimum

(approx.)
diameter

[mm] [rpm] [kg m²] [l] [kg] [kg]

125-500/2 7 16 14 260 405 500 1500 0,68 41,8 300 303
150-500.1 7 21 19 410 500 500 1500 0,85 62,7 370 375
200-250 4 57 48 200 240 500 1800 0,15 81,8 350 352
200-260 6 62 33 240 2600 500 1800 0,17 46,4 355 358
200-330 5 54 48 270 330 500 1800 0,25 47,7 390 393
200-400 7 38 32 340 405 500 1800 0,52 49,5 385 389
200-500 7 36 33 420 510 500 1500 1,10 52,6 560 566
250-300 4 66,5 60 245 285 500 1800 0,35 122,8 405 408
250-330 6 72 37 290 330 500 1800 0,42 70,3 458 463
250-400 6 58 36 340 405 500 1800 0,75 78,8 460 464
250-500 7 44 40 440 520 500 1500 1,35 84,3 635 642
300-340 4 74,5 68 270 320 500 1800 0,47 175,6 547 551
300-360 6 78 44 320 360 500 1800 0,55 125,1 590 595
300-400 8 65 33 360 430 500 1800 0,94 120,7 705 711
300-500 7 56 40 450 520 500 1500 1,67 120,1 720 728

P/n values as a function of material variant, temperature and shaft material

Etanorm-R Material variant

GG, SG GM, SM GC1, SC1
20 °C 140 °C 20 °C 140 °C 20 °C 140 °C
Shaft
C45N 1.4057 C45N 1.4057 C45N 1.4057 C45N 1.4057 C45N 1.4057 C45N 1.4057
125-500/2 0,0696 0,088 0,0587 0,088 0,0677 0,0677 0,0479 0,0479 0,0696 0,0835 0,0587 0,0591
150-500.1 0,2385 0,2836 0,2013 0,2836 0,2182 0,2182 0,1542 0,1542 0,2385 0,2691 0,1905 0,1905
200-250 0,1203 0,2067 0,1015 0,1765 0,1203 0,159 0,1015 0,1124 0,1203 0,1961 0,1015 0,1389
200-260 0,2385 0,2836 0,2013 0,2836 0,2182 0,2182 0,1542 0,1542 0,2385 0,2691 0,1905 0,1905
200-330 0,2385 0,2836 0,2013 0,2836 0,2182 0,2182 0,1542 0,1542 0,2385 0,2691 0,1905 0,1905
200-400 0,2385 0,2836 0,2013 0,2836 0,2182 0,2182 0,1542 0,1542 0,2385 0,2691 0,1905 0,1905
200-500 0,2385 0,2836 0,2013 0,2836 0,2182 0,2182 0,1542 0,1542 0,2385 0,2691 0,1905 0,1905
250-300 0,1203 0,2067 0,1015 0,1765 0,1203 0,159 0,1015 0,1765 0,1203 0,1961 0,1015 0,1765
250-330 0,2385 0,2836 0,2013 0,2836 0,2182 0,2182 0,1542 0,1542 0,2385 0,2691 0,1905 0,1905
250-400 0,2385 0,2836 0,2013 0,2836 0,2182 0,2182 0,1542 0,1542 0,2385 0,2691 0,1905 0,1905
250-500 0,2385 0,2836 0,2013 0,2836 0,2182 0,2182 0,1542 0,1542 0,2385 0,2691 0,1905 0,1905
300-340 0,1203 0,2067 0,1015 0,1765 0,1203 0,159 0,1015 0,1765 0,1203 0,1961 0,1015 0,1765
300-360 0,2385 0,2836 0,2013 0,2836 0,2182 0,2182 0,1542 0,1542 0,2385 0,2691 0,1905 0,1905
1211.5/16-EN

300-400 0,2385 0,2836 0,2013 0,2836 0,2182 0,2182 0,1542 0,1542 0,2385 0,2691 0,1905 0,1905
300-500 0,2385 0,2836 0,2013 0,2836 0,2182 0,2182 0,1542 0,1542 0,2385 0,2691 0,1905 0,1905

16 Etanorm-R
 Centrifugal Pumps with Shaft Seal
Water Pump

Permissible forces and moments at the pump nozzles

FV

FH

FH

FV
FH 2 2 2
FV FH Mt
+ + -1
FVmax FHmax Mtmax
FH

Fig. 3: Forces and moments at the pump nozzles

The following condition must be met:
∑IFVI, ∑IFHI, and ∑IMtI are the sums of the absolute values of the
respective loads acting on the nozzles. Neither the load
direction nor the load distribution among the nozzles are
taken into account in these sums.
The values indicated also apply to pumps on non-grouted
baseplates.

Forces and moments at the pump nozzles

DN Material variant
GG, GM, GC1 SG, SM, SC1
F Vmax FHmax Mtmax F Vmax FHmax Mtmax
[kN] [kN] [kNm] [kN] [kN] [kNm]
125 2,5 3,5 0,95 3,8 5,3 1,45
150 2,75 3,9 1,45 4,2 5,9 2,2
200 4,0 5,6 2,4 6,0 8,4 3,6
250 5,0 7,0 3,8 7,5 10,5 5,7
300 5,0 7,0 6,2 7,5 10,5 9,3
350 5,0 7,0 8,60 7,5 10,5 12,9

Noise characteristics

Surface sound pressure level LpA14)15)

PN Pump Pump set
1450 rpm 1450 rpm
[kW] [dB] [dB]
15 64 69
19 65 69
22 66 70
30 67 71
37 69 72
45 70 73
55 71 74
75 72 75
90 73 76
110 74 76
132 76 79
160 76 79
200 77 80
250 78 81
315 79 82
400 79 82
1211.5/16-EN

14 The surface sound pressure level as spatial average as per ISO 3744 and EN 12639 is valid for pump operation in the Q/
QBEP = 0.8 - 1.1 range and for non-cavitating operation.
15 For measuring and constructional tolerance, add 1 dB for n ≤ 1750 rpm and 3 dB for n > 1750 rpm.

Etanorm-R 17
 Centrifugal Pumps with Shaft Seal
Water Pump

Selection charts
Etanorm-R (fixed speed version), n = 1750 rpm
2000 3000 4000 5000 US.gpm 10000

2000 IM.gpm 3000 4000 5000

100
300

200
300-400

50 250-400

200-400
40

30 100

300-360
200-330 250-330
ft
20

200-260 50
300-340

40

10 250-300
30
200-250
H
[m]

20

4
400 500 Q[m³/h] 1000 2000 2500

l/s 200 300 400 500

Etanorm-R (fixed speed version), n = 1450 rpm

1000 US.gpm 2000 3000 4000 5000

1000 IM.gpm 2000 3000 4000 5000

100
300

200
150-500.1 200-500
250-500 300-500
50

40

125-500.2 200-400 300-400

30 100

250-400
20

200-330 300-360
250-330 50

40

10 200-260
30

H
[m] 300-340

20
1211.5/16-EN

200-250 250-300
5
ft
4

3 10
50 Q[l/s] 100 200 300 400 500 600

200 300 400 500 m³/h 1000 2000

18 Etanorm-R
 Centrifugal Pumps with Shaft Seal
Water Pump

Etanorm-R (fixed speed version), n = 1160 rpm

300 400 500 US.gpm 1000 2000 3000 4000 5000

200 300 400 500 IM.gpm 1000 2000 3000 4000 5000
70
200

50

200-500 300-500
40 150-500.1 250-500
125-500.2
30 100

250-400 300-400
200-400
20

50

200-330 250-330 300-360 40

10
30
200-260

200-250 300-340 20
250-300
5

3 10

ft
2

H
5
[m]

1
50 Q[m³/h] 100 200 300 400 500 1000 2000

20 30 40 50 l/s 100 200 300 400 500

Etanorm-R (fixed speed version), n = 960 rpm

300 400 500 US.gpm 1000 2000 3000 4000 5000

200 300 400 500 IM.gpm 1000 2000 3000 4000 5000
50

40

30 100
200-500
150-500.1 250-500 300-500

20
125-500.2
300-400 50
200-400

250-400 40

10
30
200-330 250-330 300-360

20
200-260

4 300-340
250-300
3 10
1211.5/16-EN

200-250

ft
2

H
5
[m]

1
50 Q[m³/h] 100 200 300 400 500 1000 2000

20 30 40 50 l/s 100 200 300 400 500

Etanorm-R 19
20

Dimensions

Pump dimensions
Etanorm-R

a f
DN2 e

l h2
DN1

h3 h1

s1 s2
i1 n3 n4 D1221:168

w c n1 n2
110
d2
m2 u
100

20
165

m1
60 t
b
d1m6

Fig. 4: Pump dimensions

Dimensions

Etanorm-R DN1 DN2 a b c d1m6 d2 e f h1 h2 h3 i1 l m1 m2 n1 n2 n3 n4 s1 s2 t u w

[mm]
125-500/2 150 125 245 120 121 60 24 270 703 355 300 297 95 140 250 190 270 300 220 250 6 22 64 18 582
150-500.1 200 150 150 100 115 60 28 315 715 400 450 359 115 140 300 230 240 260 190 210 6 25 64 18 600
200-250 200 200 220 100 119 60 28 250 815 355 345 329 109 140 300 230 220 280 170 230 6 25 64 18 690

Centrifugal Pumps with Shaft Seal

200-260 200 200 200 100 120 60 28 300 715 400 350 369 115 140 300 230 220 280 170 230 8 25 64 18 595
200-330 250 200 200 100 120 60 28 315 715 400 400 390 115 140 300 230 220 280 170 230 8 25 64 18 595
200-400 250 200 180 130 120 60 28 290 715 400 400 358 115 140 300 230 220 280 155 215 8 25 64 18 595
200-500 250 200 200 130 115 60 28 387 715 500 450 497 140 140 350 280 320 380 255 315 20 25 64 18 600
250-300 250 250 225 130 115 60 28 300 830 400 400 384 95 140 300 230 270 330 205 265 8 25 64 18 695
250-330 250 250 250 130 120 60 34 345 715 450 400 445 140 140 350 280 310 390 245 325 10 25 64 18 595
250-400 300 250 180 130 120 60 34 335 715 450 480 400 140 140 350 280 320 380 255 315 10 25 64 18 595
250-500 300 250 225 130 115 60 34 425 715 500 500 514 162,5 140 400 325 360 440 295 375 20 32 64 18 600
300-340 300 300 255 160 115 60 34 315 850 450 450 427 120 140 350 280 310 390 230 310 10 25 64 18 715

Water Pump
300-360 300 300 300 160 122 60 34 387 717 560 450 505 162,5 140 400 325 310 390 230 310 20 32 64 18 595
300-400 350 300 300 160 120 60 34 425 715 560 500 540 162,5 140 400 325 350 450 270 370 20 32 64 18 595
300-500 350 300 300 160 115 60 34 450 715 560 500 581 162,5 140 400 325 350 450 270 370 20 32 64 18 600

1211.5/16-EN
 1211.5/16-EN

Dimensions of the pump set with foundation

a f 5 e

DN2

h2 x
DN1

1211:80/4
h1

i1 g

D01033
y
85 b4

v l4
l2 b3
i2 l3 b2
l1 b1

Fig. 5: Dimensions of the pump set with foundation

Dimensions
Etanorm-R P2 DN1 DN2 a e f g h2 i y Coupling Spacer-type coupling
1160 rpm

1450 rpm
1750 rpm

b1 b2 b3 b4 h1 i2 l1 l2 l3 v b1 b2 b3 b4 h1 i2 l1 l2 l3 l4 v x
960 rpm
Motor

[kW] [mm]
125-500/2 160L 11,0 - 150 125 245 270 703 M20 × 400 300 145 450 1010 760 710 370 525 115 1920 1150 1695 310 1010 760 710 370 525 115 1920 1150 1695 - 310 200

Centrifugal Pumps with Shaft Seal

125-500/2 180M 18,5 - 150 125 245 270 703 M20 × 400 300 145 450 1010 760 710 370 525 115 1920 1150 1695 310 1010 760 710 370 525 115 1920 1150 1695 - 310 200
125-500/2 180L 15,0 - 150 125 245 270 703 M20 × 400 300 145 450 1010 760 710 370 525 115 1920 1150 1695 310 900 650 805 318 505 110 2000 1250 1780 - 280 200
125-500/2 200L 18,5 - 150 125 245 270 703 M20 × 400 300 145 450 1010 760 710 370 525 115 1920 1150 1695 310 1010 760 710 370 525 110 2100 1300 1880 - 330 200
125-500/2 200L 22,0 - 150 125 245 270 703 M20 × 400 300 145 450 1010 760 710 370 525 115 1920 1150 1695 310 1010 760 710 370 525 110 2100 1300 1880 - 330 200
125-500/2 200L - 30,0 150 125 245 270 703 M20 × 400 300 145 450 1010 760 710 370 525 115 1920 1150 1695 310 1010 760 710 370 525 110 2100 1300 1880 - 330 200
125-500/2 225S - 37,0 150 125 245 270 703 M20 × 400 300 145 450 1010 760 710 370 525 115 1920 1150 1695 310 1010 760 710 370 525 110 2100 1300 1880 - 330 200
125-500/2 225M 30,0 45,0 150 125 245 270 703 M20 × 400 300 145 450 1010 760 710 370 525 115 1920 1150 1695 310 1010 760 710 370 525 110 2100 1300 1880 - 330 200
125-500/2 250M 37,0 55,0 150 125 245 270 703 M20 × 400 300 145 450 1010 760 710 370 525 115 1920 1150 1695 310 1010 760 710 370 525 110 2100 1300 1880 - 330 200
Etanorm-R

125-500/2 280S 45,0 75,0 150 125 245 270 703 M20 × 400 300 145 450 900 650 605 318 505 110 2000 1250 1780 280 1110 860 810 420 545 110 2260 1450 2040 - 330 200
125-500/2 280M 55,0 90,0 150 125 245 270 703 M20 × 400 300 145 450 900 650 605 318 505 110 2000 1250 1780 280 1110 860 810 420 545 110 2260 1450 2040 - 330 200
150-500.1 200L 18,5 - 200 150 150 315 715 M20 × 400 450 170 450 820 570 525 272 550 115 1920 1150 1695 285 1010 760 710 365 570 110 2100 1300 1880 - 330 200
150-500.1 200L 22,0 - 200 150 150 315 715 M20 × 400 450 170 450 820 570 525 272 550 115 1920 1150 1695 285 1010 760 710 365 570 110 2100 1300 1880 - 330 200

Water Pump
150-500.1 225S 37,0 - 200 150 150 315 715 M20 × 400 450 170 450 820 570 525 272 550 115 1920 1150 1695 285 1010 760 710 365 570 110 2100 1300 1880 - 330 200
150-500.1 225M 30,0 - 200 150 150 315 715 M20 × 400 450 170 450 820 570 525 272 550 115 1920 1150 1695 285 1010 760 710 365 570 110 2100 1300 1880 - 330 200
150-500.1 250M 37,0 - 200 150 150 315 715 M20 × 400 450 170 450 900 650 605 313 550 110 2000 1250 1780 280 1110 860 810 415 590 110 2260 1450 2040 - 330 200
150-500.1 280S 45,0 - 200 150 150 315 715 M20 × 400 450 170 450 900 650 605 313 550 110 2000 1250 1780 280 1110 860 810 415 590 110 2260 1450 2040 - 330 200
21
22

Etanorm-R P2 DN1 DN2 a e f g h2 i y Coupling Spacer-type coupling

1160 rpm

1450 rpm
1750 rpm
b1 b2 b3 b4 h1 i2 l1 l2 l3 v b1 b2 b3 b4 h1 i2 l1 l2 l3 l4 v x

960 rpm
Motor
Etanorm-R

[kW] [mm]
150-500.1 280S - 75,0 200 150 150 315 715 M20 × 400 450 170 450 900 650 605 313 550 110 2000 1250 1780 280 1110 860 810 415 590 110 2260 1450 2040 - 330 200
150-500.1 280M 55,0 90,0 200 150 150 315 715 M20 × 400 450 170 450 1010 760 710 365 570 110 2100 1300 1880 330 1110 860 810 415 590 110 2260 1450 2040 - 330 200
150-500.1 315S 75,0 110,0 200 150 150 315 715 M20 × 400 450 170 450 1010 760 710 365 570 110 2100 1300 1880 330 1110 860 800 410 610 110 2450 1650 2230 825 330 200
150-500.1 315M - 132,0 200 150 150 315 715 M20 × 400 450 170 450 1110 860 810 415 590 110 2260 1450 2040 330 1110 860 800 410 610 110 2450 1650 2230 825 330 200
200-250 132M 4,0 - 200 200 220 250 815 M20 × 400 345 170 450 820 570 525 293 505 115 1920 1150 1695 285 900 650 605 333 505 110 2000 1250 1780 - 280 200
200-250 132M 5,5 - 200 200 220 250 815 M20 × 400 345 170 450 820 570 525 293 505 115 1920 1150 1695 285 900 650 605 333 505 110 2000 1250 1780 - 280 200
200-250 160M 7,5 - 200 200 220 250 815 M20 × 400 345 170 450 820 570 525 293 505 115 1920 1150 1695 285 1010 760 710 385 525 110 2100 1300 1880 - 330 200
200-250 160L 11,0 15,0 200 200 220 250 815 M20 × 400 345 170 450 820 570 525 293 505 115 1920 1150 1695 285 1010 760 710 385 525 110 2100 1300 1880 - 330 200
200-250 180M - 18,5 200 200 220 250 815 M20 × 400 345 170 450 820 570 525 293 505 115 1920 1150 1695 285 1010 760 710 385 525 110 2100 1300 1880 - 330 200
200-250 180L 15,0 22,0 200 200 220 250 815 M20 × 400 345 170 450 820 570 525 293 505 115 1920 1150 1695 285 1010 760 710 385 525 110 2100 1300 1880 - 330 200
200-250 200L - 30,0 200 200 220 250 815 M20 × 400 345 170 450 900 650 605 333 505 110 2000 1250 1780 280 1110 860 810 435 545 110 2260 1450 2040 - 330 200
200-250 225S - 37,0 200 200 220 250 815 M20 × 400 345 170 450 900 650 605 333 505 110 2000 1250 1780 280 1110 860 810 435 545 110 2260 1450 2040 - 330 200
200-250 225M - 45,0 200 200 220 250 815 M20 × 400 345 170 450 900 650 605 333 505 110 2000 1250 1780 280 1110 860 810 435 545 110 2260 1450 2040 - 330 200
200-260 160M 7,5 - 200 200 200 300 715 M20 × 400 350 170 450 820 570 525 293 550 115 1920 1150 1695 285 820 570 525 293 550 115 1920 1150 1695 - 285 200
200-260 160L 11,0 18,5 200 200 200 300 715 M20 × 400 350 170 450 820 570 525 293 550 115 1920 1150 1695 285 900 650 605 333 550 110 2000 1250 1780 - 280 200
200-260 180L 15,0 22,0 200 200 200 300 715 M20 × 400 350 170 450 820 570 525 293 550 115 1920 1150 1695 285 900 650 605 333 550 110 2000 1250 1780 - 280 200
200-260 180L 15,0 22,0 200 200 200 300 715 M20 × 400 350 170 450 820 570 525 293 550 115 1920 1150 1695 285 900 650 605 333 550 110 2000 1250 1780 - 280 200
200-260 200L 18,5 30,0 200 200 200 300 715 M20 × 400 350 170 450 820 570 525 293 550 115 1920 1150 1695 285 1010 760 710 385 570 110 2100 1300 1880 - 330 200
200-260 225S - 37,0 200 200 200 300 715 M20 × 400 350 170 450 820 570 525 293 550 115 1920 1150 1695 285 1010 760 710 385 570 110 2100 1300 1880 - 330 200
200-260 225M - 45,0 200 200 200 300 715 M20 × 400 350 170 450 820 570 525 293 550 115 1920 1150 1695 285 1010 760 710 385 570 110 2100 1300 1880 - 330 200
200-260 250M - 55,0 200 200 200 300 715 M20 × 400 350 170 450 900 650 605 333 550 110 2000 1250 1780 280 1110 860 810 435 590 110 2260 1450 2040 - 330 200
200-330 160L 11,0 - 250 200 200 315 715 M20 × 400 400 170 450 820 570 525 293 550 115 1920 1150 1695 285 900 650 605 333 550 110 2000 1250 1780 - 280 200
200-330 180M 15,0 18,5 250 200 200 315 715 M20 × 400 400 170 450 820 570 525 293 550 115 1920 1150 1695 285 900 650 605 333 550 110 2000 1250 1780 - 280 200
200-330 180L 15,0 22,0 250 200 200 315 715 M20 × 400 400 170 450 820 570 525 293 550 115 1920 1150 1695 285 900 650 605 333 550 110 2000 1250 1780 - 280 200
200-330 200L 18,5 - 250 200 200 315 715 M20 × 400 400 170 450 820 570 525 293 550 115 1920 1150 1695 285 1010 760 710 385 570 110 2100 1300 1880 - 330 200
200-330 200L 22,0 30,0 250 200 200 315 715 M20 × 400 400 170 450 820 570 525 293 550 115 1920 1150 1695 285 1010 760 710 385 570 110 2100 1300 1880 - 330 200
200-330 225S - 37,0 250 200 200 315 715 M20 × 400 400 170 450 820 570 525 293 550 115 1920 1150 1695 285 1010 760 710 385 570 110 2100 1300 1880 - 330 200
200-330 225M 30,0 45,0 250 200 200 315 715 M20 × 400 400 170 450 820 570 525 293 550 115 1920 1150 1695 285 1010 760 710 385 570 110 2100 1300 1880 - 330 200
200-330 250M - 55,0 250 200 200 315 715 M20 × 400 400 170 450 900 650 605 333 550 110 2000 1250 1780 280 1110 860 810 435 590 110 2260 1450 2040 - 330 200

Centrifugal Pumps with Shaft Seal

200-330 280S - 75,0 250 200 200 315 715 M20 × 400 400 170 450 900 650 605 333 550 110 2000 1250 1780 280 1110 860 810 435 590 110 2260 1450 2040 - 330 200
200-330 280M - 90,0 250 200 200 315 715 M20 × 400 400 170 450 1010 760 710 385 570 110 2100 1300 1880 330 1110 860 810 435 590 110 2260 1450 2040 - 330 200
200-330 315S - 110,0 250 200 200 315 715 M20 × 400 400 170 450 1010 760 710 385 570 110 2100 1300 1880 330 1110 860 800 430 610 110 2450 1650 2230 825 330 200
200-400 200L 18,5 - 250 200 180 290 715 M20 × 400 400 170 450 820 570 525 293 550 115 1920 1150 1695 285 1010 760 710 385 570 110 2100 1300 1880 - 330 200
200-400 200L 22,0 - 250 200 180 290 715 M20 × 400 400 170 450 820 570 525 293 550 115 1920 1150 1695 285 1010 760 710 385 570 110 2100 1300 1880 - 330 200
200-400 225M 30,0 - 250 200 180 290 715 M20 × 400 400 170 450 820 570 525 293 550 115 1920 1150 1695 285 1010 760 710 385 570 110 2100 1300 1880 - 330 200
200-400 250M 37,0 - 250 200 180 290 715 M20 × 400 400 170 450 900 650 605 333 550 110 2000 1250 1780 280 1110 860 810 435 590 110 2260 1450 2040 - 330 200
200-400 280S 45,0 75,0 250 200 180 290 715 M20 × 400 400 170 450 900 650 605 333 550 110 2000 1250 1780 280 1110 860 810 435 590 110 2260 1450 2040 - 330 200
200-400 280M 55,0 90,0 250 200 180 290 715 M20 × 400 400 170 450 1010 760 710 385 570 110 2100 1300 1880 330 1110 860 810 435 590 110 2260 1450 2040 - 330 200
200-400 315S 75,0 110,0 250 200 180 290 715 M20 × 400 400 170 450 1010 760 710 385 570 110 2100 1300 1880 330 1110 860 800 430 610 110 2450 1650 2230 825 330 200
200-400 315M - 132,0 250 200 180 290 715 M20 × 400 400 170 450 1110 860 810 435 590 110 2260 1450 2040 330 1110 860 800 430 610 110 2450 1650 2230 825 330 200

Water Pump
200-500 225M 30,0 - 250 200 200 387 715 M20 × 400 450 195 450 1010 760 710 385 670 110 2000 1200 1780 330 1010 760 710 385 670 110 2100 1300 1880 - 330 200
200-500 250M 37,0 - 250 200 200 387 715 M20 × 400 450 195 450 1010 760 710 385 670 110 2000 1200 1780 330 1110 860 810 435 690 110 2260 1450 2040 - 330 200
200-500 280S 45,0 - 250 200 200 387 715 M20 × 400 450 195 450 1010 760 710 385 670 110 2100 1300 1880 330 1110 860 810 435 690 110 2260 1450 2040 - 330 200
200-500 280M 55,0 - 250 200 200 387 715 M20 × 400 450 195 450 1010 760 710 385 670 110 2100 1300 1880 330 1110 860 810 435 690 110 2260 1450 2040 - 330 200
200-500 315S 75,0 - 250 200 200 387 715 M20 × 400 450 195 450 1110 860 810 435 690 110 2260 1450 2040 330 1110 860 800 430 710 110 2450 1650 2230 825 330 200

1211.5/16-EN
 1211.5/16-EN

Etanorm-R P2 DN1 DN2 a e f g h2 i y Coupling Spacer-type coupling

1160 rpm

1450 rpm
1750 rpm
b1 b2 b3 b4 h1 i2 l1 l2 l3 v b1 b2 b3 b4 h1 i2 l1 l2 l3 l4 v x

960 rpm
Motor
[kW] [mm]
200-500 315S - 110,0 250 200 200 387 715 M20 × 400 450 195 450 1110 860 810 435 690 110 2260 1450 2040 330 1110 860 800 430 710 110 2450 1650 2230 825 330 200
200-500 315M 90,0 132,0 250 200 200 387 715 M20 × 400 450 195 450 1110 860 810 435 690 110 2260 1450 2040 330 1110 860 800 430 710 110 2450 1650 2230 825 330 200
250-300 160L 11 - 250 250 225 300 830 M20 × 400 400 170 450 1010 760 710 385 570 115 1920 1150 1695 310 1010 760 710 385 570 110 2100 1300 1880 - 330 250
250-300 180M - 18,5 250 250 225 300 830 M20 × 400 400 170 450 1010 760 710 385 570 115 1920 1150 1695 310 1010 760 710 385 570 110 2100 1300 1880 - 330 250
250-300 180L 15 - 250 250 225 300 830 M20 × 400 400 170 450 1010 760 710 385 570 115 1920 1150 1695 310 1110 860 810 445 590 110 2260 1450 2040 - 330 250
250-300 200L 18,5 30 250 250 225 300 830 M20 × 400 400 170 450 1010 760 710 385 570 110 2000 1200 1780 330 1110 860 810 445 590 110 2260 1450 2040 - 330 250
250-300 200L 22 - 250 250 225 300 830 M20 × 400 400 170 450 1010 760 710 385 570 110 2000 1200 1780 330 1110 860 810 445 590 110 2260 1450 2040 - 330 250
250-300 225S - 37 250 250 225 300 830 M20 × 400 400 170 450 1010 760 710 385 570 110 2000 1200 1780 330 1110 860 810 445 590 110 2260 1450 2040 - 330 250
250-300 225M 30 45 250 250 225 300 830 M20 × 400 400 170 450 1010 760 710 385 570 110 2000 1200 1780 330 1110 860 810 445 590 110 2260 1450 2040 - 330 250
250-300 250M - 55 250 250 225 300 830 M20 × 400 400 170 450 1010 760 710 385 570 110 2100 1300 1880 330 1110 860 800 430 610 110 2450 1650 2230 825 330 250
250-300 280S - 75 250 250 225 300 830 M20 × 400 400 170 450 1010 760 710 385 570 110 2100 1300 1880 330 1110 860 800 430 610 110 2450 1650 2230 825 330 250
250-300 280M - 90 250 250 225 300 830 M20 × 400 400 170 450 1110 860 810 435 590 110 2260 1450 2040 330 1110 860 800 430 610 110 2450 1650 2230 825 330 250
250-330 180L 15 - 250 250 250 345 715 M20 × 400 400 195 450 1010 760 710 395 620 115 1920 1150 1695 310 1010 760 710 395 620 110 2100 1300 1880 - 330 200
250-330 200L 18,5 - 250 250 250 345 715 M20 × 400 400 195 450 1010 760 710 395 620 115 1920 1150 1695 310 1010 760 710 395 620 110 2100 1300 1880 - 330 200
250-330 200L 22 - 250 250 250 345 715 M20 × 400 400 195 450 1010 760 710 395 620 115 1920 1150 1695 310 1010 760 710 395 620 110 2100 1300 1880 - 330 200
250-330 225S 37 - 250 250 250 345 715 M20 × 400 400 195 450 1010 760 710 395 620 115 1920 1150 1695 310 1010 760 710 395 620 110 2100 1300 1880 - 330 200
250-330 225M 30 - 250 250 250 345 715 M20 × 400 400 195 450 1010 760 710 395 620 110 2000 1200 1780 330 1010 760 710 395 620 110 2100 1300 1880 - 330 200
250-330 250M 37 55 250 250 250 345 715 M20 × 400 400 195 450 1010 760 710 395 620 110 2000 1200 1780 330 1110 860 810 445 640 110 2240 1450 2040 - 330 200
250-330 280S 45 75 250 250 250 345 715 M20 × 400 400 195 450 1010 760 710 395 620 110 2100 1300 1880 330 1110 860 810 445 640 110 2240 1450 2040 - 330 200
250-330 280M - 90 250 250 250 345 715 M20 × 400 400 195 450 1010 760 710 395 620 110 2100 1300 1880 330 1110 860 810 445 640 110 2240 1450 2040 - 330 200
250-330 315S - 110 250 250 250 345 715 M20 × 400 400 195 450 1110 860 810 445 640 110 2260 1450 2040 330 1110 860 800 440 660 110 2450 1650 2230 825 330 200
250-330 315M - 132 250 250 250 345 715 M20 × 400 400 195 450 1110 860 810 445 640 110 2260 1450 2040 330 1110 860 800 440 660 110 2450 1650 2230 825 330 200
250-400 200L 18,5 - 300 250 180 335 715 M20 × 400 480 195 450 1010 760 710 385 620 115 1920 1150 1695 310 1010 760 710 385 620 110 2100 1300 1880 - 330 200
250-400 200L 22 - 300 250 180 335 715 M20 × 400 480 195 450 1010 760 710 385 620 115 1920 1150 1695 310 1010 760 710 385 620 110 2100 1300 1880 - 330 200
250-400 225S 37 - 300 250 180 335 715 M20 × 400 480 195 450 1010 760 710 385 620 115 1920 1150 1695 310 1010 760 710 385 620 110 2100 1300 1880 - 330 200
250-400 225M 30 - 300 250 180 335 715 M20 × 400 480 195 450 1010 760 710 385 620 110 2000 1200 1780 330 1010 760 710 385 620 110 2100 1300 1880 - 330 200
250-400 250M 37 - 300 250 180 335 715 M20 × 400 480 195 450 1010 760 710 385 620 110 2000 1200 1780 330 1110 860 810 435 640 110 2260 1450 2040 - 330 200
250-400 280S 45 - 300 250 180 335 715 M20 × 400 480 195 450 1010 760 710 385 620 110 2100 1300 1880 330 1110 860 810 435 640 110 2260 1450 2040 - 330 200
250-400 280S - 75 300 250 180 335 715 M20 × 400 480 195 450 1010 760 710 385 620 110 2100 1300 1880 330 1110 860 810 435 640 110 2260 1450 2040 - 330 200

Centrifugal Pumps with Shaft Seal

250-400 280M 55 90 300 250 180 335 715 M20 × 400 480 195 450 1010 760 710 385 620 110 2100 1300 1880 330 1110 860 810 435 640 110 2260 1450 2040 - 330 200
250-400 315S 75 110 300 250 180 335 715 M20 × 400 480 195 450 1110 860 810 435 640 110 2260 1450 2040 330 1110 860 800 430 660 110 2450 1650 2230 825 330 200
250-400 315M - 132 300 250 180 335 715 M20 × 400 480 195 450 1110 860 810 435 640 110 2260 1450 2040 330 1110 860 800 430 660 110 2450 1650 2230 825 330 200
250-500 280S 45 - 300 250 225 425 715 M20 × 400 500 220 450 1110 860 810 445 690 110 2260 1450 2040 330 1110 860 810 445 690 110 2260 1450 2040 - 330 200
250-500 280M 55 - 300 250 225 425 715 M20 × 400 500 220 450 1110 860 810 445 690 110 2260 1450 2040 330 1110 860 800 440 710 110 2450 1650 2230 825 330 200
250-500 315S 75 - 300 250 225 425 715 M20 × 400 500 220 450 1110 860 810 445 690 110 2260 1450 2040 330 1110 860 800 440 710 110 2450 1650 2230 825 330 200
250-500 315M 90 - 300 250 225 425 715 M20 × 400 500 220 450 1110 860 810 445 690 110 2260 1450 2040 330 1110 860 800 440 710 110 2450 1650 2230 825 330 200
300-340 180L 15,0 - 300 300 255 315 850 M20 × 400 450 195 450 1010 760 710 395 620 110 2000 1200 1780 330 1110 860 810 445 640 110 2260 1450 2040 - 330 250
Etanorm-R

300-340 200L 18,5 - 300 300 255 315 850 M20 × 401 450 195 450 1010 760 710 395 620 110 2000 1200 1780 330 1110 860 810 445 640 110 2260 1450 2040 - 330 250
300-340 200L 22,0 - 300 300 255 315 850 M20 × 402 450 195 450 1010 760 710 395 620 110 2000 1200 1780 330 1110 860 810 445 640 110 2260 1450 2040 - 330 250
300-340 225S - 37,0 300 300 255 315 850 M20 × 403 450 195 450 1010 760 710 385 620 110 2100 1300 1880 330 1110 860 810 445 640 110 2260 1450 2040 - 330 250

Water Pump
300-340 225M 30,0 45,0 300 300 255 315 850 M20 × 404 450 195 450 1010 760 710 385 620 110 2100 1300 1880 330 1110 860 800 440 660 110 2450 1650 2230 - 330 250
300-340 250M 30,0 55,0 300 300 255 315 850 M20 × 405 450 195 450 1010 760 710 385 620 110 2100 1300 1880 330 1110 860 800 440 660 110 2450 1650 2230 825 330 250
300-340 250M 37,0 - 300 300 255 315 850 M20 × 406 450 195 450 1010 760 710 395 620 110 2100 1300 1880 330 1110 860 800 440 660 110 2450 1650 2230 825 330 250
300-340 280S 45,0 75,0 300 300 255 315 850 M20 × 407 450 195 450 1110 860 810 445 640 110 2260 1450 2040 330 1110 860 800 440 660 110 2450 1650 2230 825 330 250
23

300-340 280M - 90,0 300 300 255 315 850 M20 × 408 450 195 450 1110 860 810 445 640 110 2260 1450 2040 330 1110 860 800 440 660 110 2450 1650 2230 825 330 250
24

Etanorm-R P2 DN1 DN2 a e f g h2 i y Coupling Spacer-type coupling

1160 rpm

1450 rpm
1750 rpm
b1 b2 b3 b4 h1 i2 l1 l2 l3 v b1 b2 b3 b4 h1 i2 l1 l2 l3 l4 v x

960 rpm
Motor
Etanorm-R

[kW] [mm]
300-340 315S - 110,0 300 300 255 315 850 M20 × 409 450 195 450 1110 860 810 445 640 110 2260 1450 2040 330 1110 860 800 440 660 110 2590 1800 2370 900 330 250
300-340 315M - 132,0 300 300 255 315 850 M20 × 410 450 195 450 1110 860 800 440 660 110 2450 1650 2230 330 1110 860 800 440 660 110 2590 1800 2370 900 330 250
300-360 225M 30,0 - 300 300 300 387 717 M20 × 411 450 220 450 1010 760 710 395 730 110 2000 1200 1780 330 1110 860 810 445 750 110 2260 1450 2040 - 330 250
300-360 250M 37,0 - 300 300 300 387 717 M20 × 412 450 220 450 1010 760 710 395 730 110 2100 1300 1880 330 1110 860 810 445 750 110 2250 1450 2040 - 330 250
300-360 280S 45,0 - 300 300 300 387 717 M20 × 413 450 220 450 1010 760 710 395 730 110 2100 1300 1880 330 1110 860 800 440 750 110 2450 1650 2230 825 330 250
300-360 280M 55,0 90,0 300 300 300 387 717 M20 × 414 450 220 450 1010 760 710 395 730 110 2100 1300 1880 330 1110 860 800 440 750 110 2450 1650 2230 825 330 250
300-360 315S 75,0 110,0 300 300 300 387 717 M20 × 415 450 220 450 1110 860 810 445 750 110 2260 1450 2040 330 1110 860 800 440 750 110 2450 1650 2230 825 330 250
300-360 315M - 132,0 300 300 300 387 717 M20 × 416 450 220 450 1110 860 810 445 750 110 2260 1450 2040 330 1110 860 800 440 750 110 2450 1650 2230 825 330 250
300-400 250M 37,0 - 350 300 300 425 715 M20 × 417 500 220 450 1110 860 810 445 750 110 2260 1450 2040 330 1110 860 810 455 750 110 2260 1450 2040 - 330 250
300-400 280S 45,0 - 350 300 300 425 715 M20 × 418 500 220 450 1110 860 810 445 750 110 2260 1450 2040 330 1110 860 800 450 770 110 2450 1650 2230 825 330 250
300-400 280M 55,0 - 350 300 300 425 715 M20 × 419 500 220 450 1110 860 810 445 750 110 2260 1450 2040 330 1110 860 800 450 770 110 2450 1650 2230 825 330 250
300-400 315S 75,0 - 350 300 300 425 715 M20 × 420 500 220 450 1110 860 810 445 750 110 2260 1450 2040 330 1110 860 800 450 770 110 2450 1650 2230 825 330 250
300-400 315S - 110,0 350 300 300 425 715 M20 × 421 500 220 450 1110 860 810 445 750 110 2260 1450 2040 330 1110 860 800 450 770 110 2450 1650 2230 825 330 250
300-400 315M 90,0 132,0 350 300 300 425 715 M20 × 422 500 220 450 1110 860 810 445 750 110 2260 1450 2040 330 1110 860 800 450 770 110 2450 1650 2230 825 330 250
300-500 315S 75,0 - 350 300 300 450 715 M20 × 423 500 220 450 1110 860 810 445 750 110 2260 1450 2040 330 1110 860 800 450 770 110 2450 1650 2230 825 330 250
300-500 315M 75,0 - 350 300 300 450 715 M20 × 424 500 220 450 1110 860 810 445 750 110 2260 1450 2040 330 1110 860 800 450 770 110 2450 1650 2230 825 330 250

Centrifugal Pumps with Shaft Seal

Water Pump
1211.5/16-EN
 Centrifugal Pumps with Shaft Seal
Water Pump

Connections
1M.1
6D
1M.2

8B
6B
Fig. 6: Connections
1M Connection for pressure gauge 6D Fluid filling and venting
6B Fluid drain 8B Leakage drain

Connections
Etanorm-R Connection
1M 6B 6D 8B
All G 1/2 G 3/416) G 3/416) G 3/4

Flange design
Flange design by materials

Material variant Standard Nominal size Pressure class Material

G, M, GC1 EN 1092-2 DN 125, DN 150 PN 16 Grey cast iron EN-GJL-250/A48 Cl. 35B
DN 200, DN 250, PN 10 Grey cast iron EN-GJL-250/A48 Cl. 35B
DN 300, DN 350
SG, SM, SC1 EN 1092-2 DN 125, DN 150, PN 16 Nodular cast iron, EN-GJS-400-15 /
DN 200, DN 250, A536 Gr. 60-40-18
DN 300,  DN 350

Optional: flange design to ASME Class 125, drilled

Etanorm-R Suction nozzle Discharge nozzle
125-500/2 ✘ ✘
150-500.1 ✘ ✘
200-250 ✘ ✘
200-260 ✘ ✘
200-330 ✘ ✘
200-400 ✘ ✘
200-500 ✘ ✘
250-300 ✘ ✘
250-330 ✘ ✘
250-400 - ✘
250-500 - ✘
300-340 - -
300-360 - -
300-400 ✘ -
300-500 ✘ -
1211.5/16-EN

16 Size 125-500/2: G 1/2

Etanorm-R 25
 Centrifugal Pumps with Shaft Seal
Water Pump

Interchangeability of pump components

Components featuring the same number in a column are interchangeable.

Interchangeability of pump components

Etanorm-R Description

Casing wear ring,

Casing wear ring,

Shaft protecting
Mechanical seal

Casing cover18)

Gland packing

discharge side

Spacer sleeve
Shaft sleeve
suction side
Radial ball

Lip seal17)

Thrower
bearing

sleeve
Shaft

Ring

Ring
Shaft unit

Part No. (ð Page 28)

500.1

500.3

502.1

502.2
210

321

421

433

161

461

507

523

524

525
125-500/2 65 - 1 1 1 - 1 1 1 - - 1 - - -
150-500.1 65 1 1 1 1 1 1 1 1 1 1 1 1 1 -
200-250 65 2 1 1 1 - 1 1 1 - 3 1 2 2 -
200-260 65 1 1 1 1 - 1 1 1 1 3 1 1 1 -
200-330 65 1 1 1 1 4 1 1 1 - 4 1 1 1 -
200-400 65 1 1 1 1 - 1 1 1 2 2 1 1 1 -
200-500 65 1 1 1 1 1 1 1 1 - 1 1 1 1 -
250-300 65 2 1 1 1 4 1 1 1 - 4 1 2 2 -
250-330 65 1 1 1 1 - 1 1 1 2 4 1 1 1 -
250-400 65 1 1 1 1 - 1 1 1 - 1 1 1 1 -
250-500 65 1 1 1 1 2 1 1 1 - 1 1 1 1 -
300-340 65 2 1 1 1 - 1 1 1 - 2 1 2 2 -
300-360 65 1 1 1 1 3 1 1 1 - 1 1 1 1 -
300-400 65 1 1 1 1 3 1 1 1 3 1 1 1 1 -
300-500 65 1 1 1 1 2 1 1 1 3 1 1 1 1 -

1211.5/16-EN

17 For oil lubrication only

18 For gland packing or mechanical seal

26 Etanorm-R
 Centrifugal Pumps with Shaft Seal
Water Pump

Recommended spare parts stock for 2 years' operation to DIN 24296

Quantity of spare parts for recommended spare parts stock

Part No. Description Number of pumps (including stand-by pumps)

(ð Page 28) 2 3 4 5 6 and 7 8 and 9 10 and
more
171 Diffuser19) 1 1 1 2 2 2 20 %
210 Shaft 1 1 1 2 2 2 20 %
230 Impeller 1 1 1 2 2 2 20 %
230.01/.02 Impeller19) 1 1 1 2 2 2 20 %
321 Radial ball bearing 2 2 4 4 4 6 50 %
330 Bearing bracket - - - - - 1 2
400./... Gasket (set) 4 6 8 8 9 12 150 %
412 O-ring19) 4 6 8 8 9 12 150 %
- Torque-transmitting coupling 1 1 2 2 3 4 30 %
elements (set)
502.01/02. Casing wear ring 2 2 2 3 3 4 50 %
502.03/.04 Casing wear ring19) 2 2 2 3 3 4 50 %
525.01 Spacer sleeve19) 1 1 1 2 2 2 20 %
For variants with mechanical seal:
433 Mechanical seal 1 1 2 2 2 3 25 %
500.03 Ring 1 1 2 2 2 3 25 %
523 Shaft sleeve 2 2 2 3 3 4 50 %
For variants with gland packing:
456.01 Neck bush 1 1 2 2 2 3 30 %
461 Gland packing (set) 4 4 6 6 6 8 100 %
524 Shaft protecting sleeve 2 2 2 3 3 4 50 %

Scope of supply
Depending on the model, the following items are included in
the scope of supply:
▪ Pump
▪ Drive
▪ Baseplate
▪ Coupling
▪ Coupling guard
1211.5/16-EN

19 For Etanorm-R 125-500/2 only

Etanorm-R 27
 Centrifugal Pumps with Shaft Seal
Water Pump

General assembly drawings

General assembly drawing with list of components

a) 903.03
411.03 902.01
903.08 920.01
411.08
102 902.04
920.04
502.02
230 81-92
502.01 901.14 901.01 400.02
550.74 400.01 901.02
903.04 507 360.01 360.02
411.04 411.78
411.04 210
940.01 940.02
922

524

161
500.21
400.19 321.02
500.18
321.01
901.04
411.77 550.41
330 183
731.04
901.31
903.01
411.01

b)
903.03 903.08 902.01
411.03 411.08 920.01
412.47 902.04
920.04
171
502.02 c) 902.01
920.01
502.04
903.04
411.04
502.03
502.01
525.01

922
940.01

102 400.04

230.01 161
903.62
411.62
901.30

903.01
411.01
731.04
524
1211.5/16-EN

230.02 400.19
20)
Fig. 7: a) Etanorm-R (single-entry) b) Etanorm-R (two-stage) c) Clamped casing cover

List of components

Part No. Part No. Description

102 102 Volute casing

20 On sizes 200-250, 200-260, 200-330, 250-300, 250-330 only

28 Etanorm-R
 Centrifugal Pumps with Shaft Seal
Water Pump

Part No. Part No. Description

102 411.01/.03/.04/.08 Joint ring
502.01 Casing wear ring
902.01 Stud
903.01/.03/.04/.08 Screw plug
920.01 Nut
161 161 Casing cover
400.19 Gasket
502.02 Casing wear ring
901.30 Hexagon head bolt
902.04 Stud
920.01/.04 Hexagon nut
17121) 171 With diffuser
183 183 Support foot
901.04 Hexagon head bolt
550.41 Disc
210 210 Shaft
940.01/.02 Key
230 230 Impeller
230.01/.02 230.01/.02 Impeller
321.01/.02 321.01/.02 Deep groove ball bearing
330 330 Bearing bracket
330 330 Bearing bracket
210 Shaft
312.01/.02 Deep groove ball bearing
360.01/.02 Bearing cover
400.01/.02 Gasket
411.77/.78 V-ring
500.18/.21 Ring
507 Thrower
550.74 Disc
731.0422) Pipe union
901.01/.02/.14/.31 Hexagon head bolt
81-92 Cover plate
922 Impeller nut
940.01/.02 Key
360.01/.02 360.01/.02 Bearing cover
400.01/.02 Gasket
901.01/.02 Hexagon head bolt
400.01/.02/.04/.19 400.01/.02/.04/.19 Gasket
411.01/.03/.04/.08/.62 411.01/.03/.04/.08/.6221) Joint ring
411.77/.78 411.77/.78 V-ring
412.4721) 412.47 O-ring
452.0123) 452.01 Gland follower
454.0123) 454.01 Stuffing box ring
23)
456.01 456.01 Neck bush
23)
458.01 458.01 Lantern ring, split
461 461 Gland packing
502.01/.02/.0321)/.0421) 502.01/.02/.03/.04 Casing wear ring
507 507 Thrower
524 524 Shaft protecting sleeve
1211.5/16-EN

400.04 Joint ring

525.0121) 525.01 Spacer sleeve
731.0422) 731.04 Pipe union
81-92 81-92 Cover plate

21 On size 125-500/2 only

22 For oil lubrication only
23 Not shown

Etanorm-R 29
 Centrifugal Pumps with Shaft Seal
Water Pump

Part No. Part No. Description

81-92 550.74 Disc
901.14 Hexagon head bolt
901.01/.02/.04/.14/.30/.31 901.01/.02/.04/.14/.30/.31 Hexagon head bolt
902.01/.04 902.01/.04 Stud
903.01/.03/.04/.08/.62 903.01/.03/.04/.08/.62 Screw plug
920.01/.04 920.01/.04 Hexagon nut
922 922 Impeller nut
940.01/.02 940.01/.02 Key

1211.5/16-EN

30 Etanorm-R
 Glossary

Glossary

ACS
French drinking water regulations (ACS = Attestation de
Conformité Sanitaire)

Back pull-out design

The complete back pull-out unit can be pulled out
without having to remove the pump casing from the
piping.

IE1
Efficiency class to IEC 60034-30: 1 = Standard Efficiency
(IE = International Efficiency)

IE2
Efficiency class to IEC 60034-30: 2 = High Efficiency (IE =
International Efficiency)

IE3
Efficiency class to IEC 60034-30: 3 = Premium Efficiency
(IE = International Efficiency)

WRAS
Approved by all water suppliers in the UK (WRAS =
Water Regulations Advisory Scheme)
1211.5/16-EN

31
 30/09/2020
1211.5/16-EN

KSB SE & Co. KGaA

Johann-Klein-Straße 9 • 67227 Frankenthal (Germany)
Tel. +49 6233 86-0
www.ksb.com