CH800F
ENGINE OUTPUT: 311 kW / 417hp
WEIGHT: 63-66 mt
+
REACH: 17,9-21 m
TECHNICAL DATA
CH800F
Base information Base machine (Caterpillar) 352F MH
Weight (mt) 63
Maximum reach (m) 21
Engine (diesel) Model (Caterpillar) C13 ACERT Stage IV
Net power (kW) 311
Bore (mm) 130
Stroke (mm) 157
Piston displacement (I) 12,5
Hydraulic system Max. flow, working pumps (I/min) 770
Max. flow, swing pump (I/min) 385
Max. pressure, main circuit (kPa) 38 000
Max. swing (kPa) 27 500
Undercarriage Wheel based Multidocker CH800F
Stabilizers 4 point outriggers, base plate 0,7 x 0,7 m
Axles (no) 2
Axles (front) Oscillating (lockable)
Axles (rear) Rigid mounted
Tires 16.00 - 25 air filled. Solid tires as option
Drive 4 wheel drive with planetaryhub, cardan
shafts and central gear
Brakes Hydraulic brake system with parking brake
Max. speed (km/h) 10
Volumes Fuel tank (I) 720
Cooling system (I) 50
Engine crank case (I) 65
Swing drive – drive (I) (each) 10
Hydraulic system incl. tank (I) 570
Hydraulic oil tank (I) 407
Weight main components Base machine incl. swing bearing (Kg) 13 800
Cabin Elevator Industrial CEI (Kg) 2 600
Counterweight (Kg) 15 000
Undercarriage (Kg) 20 000
Bom & Stick 8 000 - 9 000
Cylinders 2 000
LIFTING DIAGRAM
MultiDocker CH800F ®
Front end 18 meter
Cabin Elevator Industrial (CEI)
18 m
24
22
20
18
8,5 11,4 16
7,7 10,4 11,4 14
9,5 10,4 11,5 12
8,7 9,6 10,6 11,9 13,7 10
8,7 9,7 11,0 12,6 14,8 8
®
7,3 8,8 9,9 11,4 13,3 16,1 20,7 6
7,6 8,8 10,1 11,7 14,0 17,4 23,4 4
8,0 8,7 10,1 11,9 14,4 18,2 14,5 2
7,6 8,3 9,9 11,8 14,4 18,2 10,6 4,5 0
7,7 9,4 11,3 13,8 17,1 10,6 -2
8,4 10,3 12,5 15,1 -4
-6
22 20 18 16 14 12 10 8 6 4 2 0 -2 -4 -6
MultiDocker CH800F ®
Front end 21,0 meter
Lifting capacity table, unit tonne = 1.000 kg Cabin Elevator Industrial (CEI)
The lifting capacities are measured at 360° in the stick end-joint. The above values have
21 m
been calculated in compliance with ISO 10567:2007. They do not exceed 87% of the 24
hydraulic lifting capacity or 75% of the tipping load, with the machine on firm, level
ground. 22
7,0 9,2 20
7,1 9,2 18
6,6 8,4 9,2 16
7,6 8,4 9,2 14
7,0 7,7 8,4 9,4 10,6 12
7,0 7,7 8,6 9,7 11,1 10
6,3 7,0 7,9 8,8 10,1 11,7 14,0 8
®
6,2 7,1 8,0 9,1 10,5 12,4 15,2 19,9 6
6,1 7,1 8,0 9,3 10,8 13,0 16,4 22,2 4
6,0 7,0 8,0 9,3 11,0 13,4 17,0 8,6 2
5,7 6,8 7,9 9,2 11,0 13,3 15,8 6,7 0
5,2 6,4 7,6 8,9 10,6 12,8 12,9 7,0 -2
Lifting capacity table, unit tonne = 1.000 kg
The lifting capacities are measured at 360° in 5,8 7,0 8,3 9,9 11,9 12,4 7,8 -4
the stick end-joint. The above values have
been calculated in compliance with ISO 6,1 7,4 8,8 10,4 -6
10567:2007. They do not exceed 87% of the
hydraulic lifting capacity or 75% of the tipping -8
22 20 18 16 14 12 10 8 6 4 2 0 -2 -4 -6
load, with the machine on firm, level ground.
Lifting capacity table, unit tonne = 1.000 kg
The lifting capacities are measured at 360° in the stick end-joint. The above values have
been calculated in compliance with ISO 10567:2007. They do not exceed 87% of the
hydraulic lifting capacity or 75% of the tipping load, with the machine on firm, level
ground.
GET’S THE JOB DONE!
We didn’t invent the MultiDocker and start the company to make money. We invented the MultiDocker to do a job, for us. Because we were
dock-operators ourselves, we knew just what’s needed. We sat down and said to ourselves: if we could invent exactly the right machines to
do the jobs we need, what would it look like? How would it work?
And with a long process of experimentation, we devised the MultiDocker CH - a machine that’s mostly standard, tried- and-tested, ultra-
reliable Caterpillar components. We wanted high efficiency, fast performance, faultless reliability, high machine availability and a long
Low-cost working life. So we built it, and it worked. Over the years we have developed the products Further and increased our portfolio and
our number of partners. Today we are proud to offer world leading products and services to customers in many industries all over the world.
WELCOME TO CONTACT US or visit our website for more information!
MultiDocker Cargo Handling AB Phone +46 (0)11 450 30 00
Saltängsgatan 15 E-mail: inf o@ mu ltid o cke r.co m
SE-602 22 Norrköping, Sweden Web: www.mu ltid o cke r.co m
