Scribd
Upload
575 views1 page

BroachRotary - Sheet1 - 5

This document provides the dimensions and specifications for a broach rotary tool. Key details include: - Dimensions for the overall shape and features of the broach rotary tool which is cylindrical in shape. - Notes specifying that the broach can be switched with a dowel pin of the same length and that the tip of the pin should not wobble when the shank is on a vee block. - Material specification as DFTG (drawn filled tube grade) and additional annotation for dimensions and tolerancing.

Uploaded by

Fabio Gilii
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
575 views1 page

BroachRotary - Sheet1 - 5

This document provides the dimensions and specifications for a broach rotary tool. Key details include: - Dimensions for the overall shape and features of the broach rotary tool which is cylindrical in shape. - Notes specifying that the broach can be switched with a dowel pin of the same length and that the tip of the pin should not wobble when the shank is on a vee block. - Material specification as DFTG (drawn filled tube grade) and additional annotation for dimensions and tolerancing.

Uploaded by

Fabio Gilii
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

.8900 .

8700

1.2427 BROACH IS SWITCHED WITH


DOWEL PIN OF SAME LENGTH
.2000 WHEN SHANK IS ON A VEE BLOCK
TAP 1/4-20 TIP OF PIN IS ADJUSTED TO NOT
1.7600 WOBBLE.
2.5700

.6245

1.7750
GREASE HOLE

1.2° .3850

.5000
.3300

.3125
.7500 .8760
1.1240
1.7500

.1560 1.0000
TAP 10-32
1.1250 .0600 R.4000
WASHER RETAINING RING
.3823 SHOULD BE
.2500 BIGGER THAN MIN REQUIRED

MATERIAL: DESR
1.3120 DFTG
1.0620 .8750 ENGR
TITLE
ENGR
UNLESS OTHERWISE SPECIFIED CHK
DATUM PRECEDENCE PRI A SEC B TER C APVD
.8750 APVD
DIMENSIONS ARE IN INCHES
ITEM NO

BroachRotary
TOLERANCES APVD SIZE

1.2000 ANGLES +
- 2° 1 PL +
- .1
THIRD
ANGLE CREATED WITH SOLIDWORKS B
2 PL + .02 3 PL + PROJECTION
CONTRACT # CODE WT SCALE 1:2 SH 1 OF 1
- - .005

SOLIDWORKS B-DETAIL INCH 08/01

.0600 WASHER 1.2000 1.3120 .2500 .8750 .8750 1.1250 1.0620 .1560 TAP 10-32 1.1240 .8760 BROACH IS SWITCHED WITH DOWEL PIN OF

You might also like