Medium Duty Piston Motors

Variable Displacement
Fixed Displacement
Medium Duty
Piston Motors

Table of Contents
Features and Introduction ..............................................................................................................................................................3
Application Information ..................................................................................................................................................................3
741XX Models - Fixed Displacement Motor Specifications ....................................................................................................4
Model 74111 Performance Data, 12,3 cm3/r [.75 in3/r] Displacement ..........................................................................................5
Model 74118 Performance Data, 20,3 cm3/r [1.24 in3/r] Displacement ........................................................................................7
Model Code ..................................................................................................................................................................................9
Installation Drawings ..............................................................................................................................................................10-11
743XX Models - Fixed Displacement Motor Specifications ..................................................................................................12
Model 74315 Performance Data, 32,9 cm3/r [2.01 in3/r] Displacement ................................................................................13-14
Model 74318 Performance Data, 40,6 cm3/r [2.48 in3/r] Displacement ................................................................................15-16
Model 74328 Performance Data, 49,2 cm3/r [3.0 in3/r] Displacement ..................................................................................17-18
Model Code..................................................................................................................................................................................19
Installation Drawings ..............................................................................................................................................................20-26
746XX Models - High Torque Fixed Displacement Motor Specifications ............................................................................27
Model 74624 Performance Data, 82,6 cm3/r [5.04 in3/r] Displacement ................................................................................28-29
Model Code ................................................................................................................................................................................30
Installation Drawings ..............................................................................................................................................................31-33
713XX Models - Variable Displacement Motor Specifications ..............................................................................................34
Model 71302 Performance Data, 40,6 to 21,0 cm3/r [2.48 to 1.28 in3/r] Displacement ........................................................35-38
Model Code ................................................................................................................................................................................39
Installation Drawings ..............................................................................................................................................................40-43
72450 Models - Servo Controlled, Variable Displacement Motor Model Code....................................................................44
Specifications ..............................................................................................................................................................................45
Installation Drawings....................................................................................................................................................................45

2 EATON Hydraulics Medium Duty Piston Motors Technical Focus E-MOPI-TM001-E1 January 2005
General Overview

Features Introduction Application Information at ISO Cleanliness Code

• Compact Eaton Medium duty piston 18/13 or better per SAE
motors convert hydraulic Case Drain Installation J1165. This code allows a
• Lighweight Durable Requirements maximum of 2,500 particles
Housing energy supplied by the pump
to mechanical energy. These CAUTION - Failure to meet per milliliter greater than 5
• Numerous Shaft Options motors are uniquely suited these requirements may µm and a maximum of 80
to fit any appliction that result in damage to the pis- particles per milliliter greater
• SAE Mounting Flanges
requires continuous rotary ton motor. than 15 µm. When compo-
• SAE O-Ring Porting nents with different cleanli-
motion at a remote location • Install piston motors in
• Dual Rotation from the power source. ness requirements are used
such a position that the in the same system, the
• Various Porting Options Axial piston motors share case drain assures an oil
the design advantages of cleanest standard shoud be
• Fixed Displacements level at or above unit cen- appllied.
piston pumps to provide ter line.
long-lasting power in a light- Fluid Recommendations
weight, easily serviceable • Oil level must be at or
above the unit center line (Refer to Eaton’s Hydraulic
package. Fluid Recommendations
before starting the piston
The chart below provides an motor. Technical Data sheet #3-401)
overview of features. For a In hydraulic systems using
complete list of options, • Provide a case drain line
of adequate size to limit Eaton’s medium duty piston
refer to the Model Code sec- pumps and motors, the opti-
tion of a given motor dis- the case pressure to
specified maximum. mum viscosity range is 10-39
placement. cSt [60-180 SUS], at normal
operating temperatures.
Cleanliness
Viscosity should never fall
In systems using Eaton below 6 cSt [45 SUS].
medium duty piston motors,
the fluid must be maintained

MOTOR SHAFT SHAFT SHAFT

MOTOR TYPE MOUNT MODEL DISPLACEMENT KEYED SPLINE THROUGH PORTING
Fixed Displacement “A” 74111 12,3 cm3/r [.75 in3/r] • • Same or Opp./Side or Rear
741XX Models 2 Bolt 74118 20,3 cm3/r [1.24 in3/r] • • Same or Opp./Side or Rear
SAE 74148 20,3 cm3/r [1.24 in3/r] • • • Same Side
74149 12,3 cm3/r [.75 in3/r] • • • Same Side
Fixed Displacement “B” 74312 32,9 cm3/r [2.01 in3/r] • • Same or Opp./Side or Rear
743XX Models 2 Bolt 74318 40,6 cm3/r [2.48 in3/r] • • Same or Opp./Side or Rear
SAE 74328 49 cm3/r [3.0 in3/r] • • Same or Opp./Side or Rear
74348 40,6 cm3/r [2.48 in3/r] • • • Same Side
Fixed Displacement “B-B” 74624 82,6 cm3/r [5.04 in3/r] • • Same Side or Rear
476XX Models 2 Bolt 74644 82,6 cm3/r [5.04 in3/r] • • • Same Side or Rear
Variable Displacement “B” 71302 40,6 to 21,0 cm3/r [2.48 to 1.28 in3/r] • • Opposite Side or Rear
713XX Models SAE 71392 40,6 to 21,0 cm3/r [2.48 to 1.28 in3/r] • • Opposite Side or Rear
Servo Control 72450 “B” 72450 40,6 to 21,0 cm3/r [2.48 to 1.28 in3/r] • • • Same Side
Variable Displacement 2 Bolt SAE 72450 49,2 to 24,6 cm3/r [3.0 to 1.5 in3/r] • • • Same Side

EATON Hydraulics Medium Duty Piston Motors Technical Focus E-MOPI-TM001-E1 January 2005 3
741XX Models

2Bolt SAE “A” Mount

12,3 cm3/r[.75 in3/r]
Displacement
20,3 cm3/r[1.24 in3/r]
Displacement

TYPICAL PRODUCT NUMBER MODEL CODE

74111-DAC-01 AAVAAAA0B000A0B
74111-DAF-01 AAVAEAA0B000A0B
74111-DAS-01 AAVAABA0B000A0B
74111-DAU-01 AAVAEBA0B000A0B
74115-DAC-01 AAVAEAA0A000A0B
74115-DAF-01 AAVAABA0A000A0B
74118-DAJ-01 AAVAAAA00000A0B
74118-DAS-01 AAVAAAB00000A0B
74118-DBJ-01 AAVAAAC00000A0B
74118-DAP-01 AAVAEAA00000A0B
74118-DBA-01 AAVAABA00000A0B
74118-DBH-01 AAVAEBA00000A0B
74148-DAF-01 AAVAECC10000A0B

SPECIFICATIONS MODEL 74111/74119 MODEL 74118/74148

Maximum Displacement 12,3 cm /r [.75 in /r]
3 3
20,3 cm3/r [1.24 in3/r]
Maximum Rated Speed 4500 RPM 3600 RPM
Continuous Rated Pressure † 210 bar [3000 lbf/in2] 210 bar [3000 lbf/in2]
Maximum Rated Pressure †† 345 bar [5000 lbf/in2] 345 bar [5000 lbf/in2]
Maximum Intermittent Pressure ††† 370 bar [5400 lbf/in2] 370 bar [5400 lbf/in2]
Input Flow at Rated Speed and Pressure 64 l/min [16.9 GPM] 79 l/min [20.8 GPM]
Output Power at Rated Speed and Pressure 13,8 kW [18.5 hp] 23,2 kW [31.1 hp]
Output Torque at Rated Speed and Pressure 29 N•m [260 lbf•in] 62 N•m [550 lbf•in]
Continuous Allowable Case Pressure 1,7 bar [25 lbf/in2] 1,7 bar [25 lbf/in2]
Continuous Inlet Temperature 107°C [225°F] 107°C [225°F]
Weight/Single Motor (approximate) 4,9 kg [11 lbs] 4,9 kg [11 lbs]

† Continuous Rated Pressure - Motor may run uninterrupted at this pressure.

†† Maximum Rated Pressure - Highest allowable system pressure. (High pressure relief valve setting)
††† Maximum Intermittent Pressure - A pressure spike only for a short period of time, not continuous.

4 EATON Hydraulics Medium Duty Piston Motors Technical Focus E-MOPI-TM001-E1 January 2005
Model 74111 &
74149

Performance Data
The charts below are repre-
sentative of a 12,3 cm3/r
[.75 in3/r]] displacement pis-
ton motor. The tests were
run at an oil temperature of
80o C [180oF] with viscosity
7-9 cSt [50-54 SUS].

Overall Efficiency
80%
70%
Percent

60%
50%
40%
30%
0 500 1000 1500 2000 2500 3000 3500 4000 4500 5000

Shaft RPM

70 bar (1000 PSI) 210 bar (3000 PSI)

Volumetric Efficiency
100%

90%
Percent

80%

70%

60%
0 500 1000 1500 2000 2500 3000 3500 4000 4500 5000

Shaft RPM

70 bar (1000 PSI) 210 bar (3000 PSI)

EATON Hydraulics Medium Duty Piston Motors Technical Focus E-MOPI-TM001-E1 January 2005 5
Model 74111 &
74149

Performance Data

Input Flow
20 75

15 60
45

l/min
GPM

10
30
5 15
0 0
500 1000 1500 2000 2500 3000 3500 4000 4500

Shaft RPM
70 bar (1000 PSI) 210 bar (3000 PSI)

Output Torque
300
250 30
200
lbf - in

20
150

N•m
100
10
50
0 0
500 1000 1500 2000 2500 3000 3500 4000 4500

Shaft RPM

70 bar (1000 PSI) 210 bar (3000 PSI)

Output Power
20 15

15
10
hp

kW

10
5
5

0 0
500 1000 1500 2000 2500 3000 3500 4000 4500

Shaft RPM
70 bar (1000 PSI) 210 bar (3000 PSI)

6 EATON Hydraulics Medium Duty Piston Motors Technical Focus E-MOPI-TM001-E1 January 2005
Model 74118 &
74148

Performance Data
The charts below are repre-
sentative of a 20,3 cm3/r
[1.24 in3/r] displacement pis-
ton motor. The tests were
run at an oil temperature of
80o C [180oF] with viscosity
7-9 cSt [50-54 SUS].

Overall Efficiency
80%

75%
Percent

70%

65%

60%
0 500 1000 1500 2000 2500 3000 3500 4000

Shaft RPM

70 bar (1000 PSI) 210 bar (3000 PSI)

Volumetric Efficiency
100%

90%
Percent

80%

70%

60%
0 500 1000 1500 2000 2500 3000 3500 4000

Shaft RPM
70 bar (1000 PSI) 210 bar (3000 PSI)

EATON Hydraulics Medium Duty Piston Motors Technical Focus E-MOPI-TM001-E1 January 2005 7
Model 74118 &
74148

Performance Data

Input Flow
25 90
20 75
60
15

l/min
GPM

45
10
30
5 15
0 0
500 750 1000 1500 1750 2250 2500 3000 3250 3600

Shaft RPM
70 bar (1000 PSI) 210 bar (3000 PSI)

Output Torque
600
60
500 50
lbf - in

400 40

N•m
300 30
20
200
10
100 0
500 750 1000 1500 1750 2250 2500 3000 3250 3600

Shaft RPM

70 bar (1000 PSI) 210 bar (3000 PSI)

Output Power
35 25
30 20
25
20 15
hp

kW

15 10
10
5 5
0 0
500 750 1000 1500 1750 2250 2500 3000 3250 3600

Shaft RPM
70 bar (1000 PSI) 210 bar (3000 PSI)

8 EATON Hydraulics Medium Duty Piston Motors Technical Focus E-MOPI-TM001-E1 January 2005
Fixed Displacement
Motor
741XX Model
Code
12,3 cm3/r[.75 in3/r]
Displacement
20,3 cm3/r[1.24 in3/r]
Displacement

A A V A A A A 0 B 0 0 0 A 0 0

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

1 2 3Code Title 7 Drain Port, Size, & Location 9 Drain Port, Size, & Location 10 11 Special Features
AAV - 20,3 cm3/r [1.24 in3/r] A - 9/16-18 UNF-2B straight 0 - As given in code title. - 00 - No Special Features, (std.)
Fixed displacement thread o-ring port - Model 74118 or 74148,
piston motor frame size upper rear, (std.) (std.)
12 13 Paint
B - 9/16-18 UNF-2B straight A - 16,6 cm3/r [1.01 in3/r]
4 5 Output Shaft thread o-ring port - destroked from 20,3 0A - Primer, (std.)
AA - 13 Tooth 16/32 spline lower rear, (std.) cm3/r [1.24 in3/r], (opt.) 0B - Black Paint, (std.)
with snap ring groove, C - 9/16-18 UNF-2B straight B - 12,3 cm3/r [.75 in3/r]
min. full spline 22,1 thread o-ring port - bot- destroked from 20,3 14 Identification
[.87], shaft extension tom rear, with through cm3/r [1.24 in3/r] - Model
41,1 [1.62], (std.) shaft only (pos. 8, selec- 74111 or 74149, (std.) 0 - Standard, (std.)
AE - Straight shaft, dia. 22,2 tion 1), (std.) C - 9,8 m3/r [.60 in3/r]
[.875], keyway 6,35 destroked from 20,3 15 Design Code
8 Auxiliary Mounting
[.25] x 25,6 [.97], shaft cm3/r [1.24] in3/r, (opt.) 0 - Eaton assigns current
extension 41,1 [1.62] Features (rear)
D - 14,96 m3/r [.91 in3/r] design code, (std.)
(key included), (std.) 0 - No Auxiliary Mounting destroked from 20,3
Feature
cm3/r [1.24] in3/r, (opt.)
6 Main Port, Size, & Location 1* - Straight through shaft,
A - 1-1/16-12 UN-2B dia. 19 [.75], with key-
straight thread o-ring- way 4,8 x 31 [.189 x
ports- opposite sides, 1.22]. 209, 3 [8.42] from
(std.) mounting flange (Key
B - 1-1/16-12 UN-2B included), 5/16 - 18
straight thread o-ring UNC-2B mounting holes
ports- rear, (std.) 14, 2 [.56] deep min. full
C - 1-1/16-12 UN-2B thread, (opt.)
straight thread o-ring
ports- same side, only
with through shaft,
(opt.)

Fixed displacement piston motors are specified by the follow-

ing model code. Once a motor is built from the model code, a
product number will be assigned to that configuration. Make
sure all positions are selected within the 15 digit code for each
motor.

EATON Hydraulics Medium Duty Piston Motors Technical Focus E-MOPI-TM001-E1 January 2005 9
Model 74111 &
74118

Installation Drawings

Opposite Side Porting

(Code position 6, Section A)

Directional arrow, stamped on side

of case next to work port,
119.9 [4.72] View A-A shows motor rotation relationship to
60 Side Location
Work Port work port when port is pressurized.
[2.36]
27 27 1-1/16-12 UN-2B For Shaft Configuration,
[1.06] [1.06] A A
see separate shaft
installation drawings.

82.52 ± .03
106.4 [3.249 ± .001]
[4.19] Dia.

Drain Port Drain Port B B

9/16-18 UNF-2B 9/16-18 UNF-2B 6.4 [.25]
(Optional Lower Rear) (Optional Upper Rear)
10.7 [.42]
View B-B
Side Location 152.1 [5.99]
Work Port 156 [6.14]
1-1/16-12 UN-2B 176.5 [6.95]

Rear Porting
(Code position 6, Section B)

Directional arrow, stamped on side

Drain Port of case next to work port,
9/16-18 119.9 [4.72]
View A-A shows motor rotation relationship to
UNF-2B 60 work port when port is pressurized.
(Optional [2.36] Rear Location
Lower Work Point For Shaft Configuration, Right Side
Rear) 1-1/16 - 12 UN-2B A A see separate shaft
30.6 installation drawings.
[1.20]

130
61.2 82.52 ± .03 [5.12]
[3.249 ± .001] Top
[2.41] 106.4
Dia.
[4.19]
Bottom
Drain Port B B
9/16-18 UNF-2B 6.4 [.25]
Rear Location (Optional Upper Mounting Hole for
Work Point Rear) 10.7 [.42] 9.52 [.375] Dia. Bolts (2)
1-1/16 - 12 UN-2B View B-B
152.1 [5.99]
166.4 [6.55]

Note: All ports are SAE (J1926) o-ring ports. Dimensions are in
millimeters [inches], unless otherwise specified.

10 EATON Hydraulics Medium Duty Piston Motors Technical Focus E-MOPI-TM001-E1 January 2005
Model 74148 &
74149

Installation Drawings

Through Shaft and Same

Side Porting Mounting Holes
(2 each side)
(Code position 6, Section C) 5/16 - 18 UNC-2B 213,9 [8.42]
14,2 [.56] deep
4,74 [.1865] 25,4 [1.00]

5,8 [.23]
76,2 41,1
[3.00] [1.62]
136,1 19,05
[5.36] [.75] Dia.
21,23
[.832] Dia.
20,6
[.81] 142,5 [5.61]

111,3 [4.38] View A-A For Shaft Configuration,

see separate shaft
Top Location installation drawings.
Work Port
1-1/16 - 12 UN-2B A A

Output
Shaft
82,52 ± .03
Au xiliar y
44,7 [3.249 ± .001]
Shaft [1.76] Dia.

Output Shafts -
Used for all 741XX Models B B
6,4 [.25]
(Code position 4, 5) Top Location 10,7 [.42]
Work Port
1-1/16 - 12 UN-2B View B-B
153,7 [6.05]

Spline Shaft Code Keyed Shaft Code

Selection AA Selection AE
Maximum Torque on Shaft Maximum Torque on Shaft
209,3 N•m [1,852 lbf•in] 209,3 N•m [1,852 lbf•in]

41,1 6,35 [.25] x 41,1

1,22 [.048] [1.62]
[1.62] 2,36 [.093] 24,6 [.97]
Keyway 3,0 [.12]
25,04
19,35 [.762] Groove Dia. [.986]

21,81 [.858] Major Dia.

13 Tooth, 16/32 DP
30° involute flat root, class 1
side fit spline, 22,23 [.875] Dia.
SAE J498b (effective 1972)
Note: All ports are SAE (J1926) o-ring ports. Dimensions are in
millimeters [inches], unless otherwise specified.

EATON Hydraulics Medium Duty Piston Motors Technical Focus E-MOPI-TM001-E1 January 2005 11
Fixed Displacement
Motor
743XX Model
Code
2 Bolt SAE “B” Mount
32,9 cm3/r[2.01 in3/r]
Displacement
40,6 cm3/r[2.48 in3/r]
Displacement
49,2 cm3/r[3.00 in3/r]
Displacement

TYPICAL PRODUCT NUMBER MODEL CODE

74315-DAL AAJAADB0AAD0A0B
74315-DBB AAJAADA0AAM0A0B
74315-DBD AAJABDA0A000A0B
74315-DBG AAJABDA0AAD0A0B
74315-DBM AAJABDA0AAM0A0B
74315-DBW AAJAABA0A000A0B
74318-DAA AAJAADA00000A0B
74318-DAB AAJAABA00000A0B
74318-DAC AAJAACA00000A0B
74318-DAE AAJAABB00000A0B
74318-DAF AAJABCG00000A0B
74318-DAG AAJABBA00000A0B
74318-DBD AAJABDA00AD0A0B
74318-DBM AAJABDA00AM0A0B
74318-DBR AAJABDB00AD0A0B
74318-DBY AAJABDA00000A0B
74318-DCW AAJAADA00D0A0B
74318-DDA AAJABCA00000A0B
74328-DAA AAKABAJ00000A0B
74328-DAB AAKAAAB0000000B
74348-DAF AAJABDA30AD0A0B

SPECIFICATIONS MODEL 74315 MODEL 74318/74348 MODEL 74328

Maximum Displacement 32,9 cm3/r [2.01 in3/r] 40,6 cm3/r [2.48 in3/r] 49,2 cm3/r [3.0 in3/r]
Maximum Rated Speed 3600 RPM 3600 RPM 3000 RPM
Continuous Rated Pressure † 210 bar [3000 lbf/in2] 210 bar [3000 lbf/in2] 210 bar [3000 lbf/in2]
Maximum Rated Pressure †† 345 bar [5000 lbf/in2] 345 bar [5000 lbf/in2] 328 bar [4750 lbf/in2]
Maximum Intermittent Pressure ††† 370 bar [5400 lbf/in2] 370 bar [5400 lbf/in2] 345 bar [5000 lbf/in2]
Input Flow at Rated Speed and Pressure 121 l/min [32 GPM] 153,7 l/min [40.6 GPM] 156,3 l/min [41.3 GPM]
Output Power at Rated Speed and Pressure 35 kW [47 hp] 43 kW [58 hp] 43 kW [58 hp]
Output Torque at Rated Speed and Pressure 92 N•m [816 lbf•in] 115 N•m [1019 lbf•in] 138 N•m [122.5 lbf•in]
Continuous Allowable Case Pressure 1,7 bar [25 lbf/in2] 1,7 bar [25 lbf/in2] 1,7 bar [25 lbf/in2]
Continuous Inlet Temperature 107°C [225°F] 107°C [225°F] 107°C [225°F]
Weight/Single Motor (approximate) 9,1 kg [20 lbs] 9,1 kg [20 lbs] 9,1 kg [20 lbs]

† Continuous Rated Pressure - Motor may run uninterrupted at this pressure.

†† Maximum Rated Pressure - Highest allowable system pressure. (High pressure relief valve setting)
††† Maximum Intermittent Pressure - A pressure spike only for a short period of time, not continuous.

12 EATON Hydraulics Medium Duty Piston Motors Technical Focus E-MOPI-TM001-E1 January 2005
Model 74315

Performance Data
The charts below are repre-
sentative of a 32,9 cm3/r
[2.01 in3/r] displacement pis-
ton motor. The tests were
run at an oil temperature of
50o C [120oF] with viscosity
19-24 cSt [117-143 SUS].

Overall Efficiency

100%

98%
Percent

90%
85%
80%
0 500 1000 1500 2000 2500 3000 3500

Shaft RPM
140 bar (2000 PSI) 280 bar (4000 PSI)

Volumetric Efficiency
100%

98%
Percent

90%

85%

80%
0 500 1000 1500 2000 2500 3000 3500

Shaft RPM
140 bar (2000 PSI) 280 bar (4000 PSI)

EATON Hydraulics Medium Duty Piston Motors Technical Focus E-MOPI-TM001-E1 January 2005 13
Model 74315

Performance Data

Input Flow
30
105
25 90
20 75

l/min
GPM

15 60
10 45
30
5
15
0 0
500 750 1000 1500 1750 2250 2500 3000

Shaft RPM
140 bar (2000 PSI) 280 bar (4000 PSI)

Output Torque
1500
1350 150
1200
lbf - in

130

N-m
1050
900 110
750 90
600 70
500 750 1000 1500 1750 2250 2500 3000

Shaft RPM

140 bar (2000 PSI) 280 bar (4000 PSI)

Output Power
60
40
50 35
40 30
hp

25
kW

30 20
20 15
10 10
5
0 0
500 750 1000 1500 1750 2250 2500 3000

Shaft RPM

140 bar (2000 PSI) 280 bar (4000 PSI)

14 EATON Hydraulics Medium Duty Piston Motors Technical Focus E-MOPI-TM001-E1 January 2005
Model 74318

Performance Data
The charts below are repre-
sentative of a 40,6 cm3/r
[2.48 in3/r] displacement pis-
ton motor. The tests were
run at an oil temperature of
50o C [120oF] with viscosity
19-24 cSt [117-143 SUS].

Overall Efficiency

100%

90%
Percent

80%
70%
60%
0 500 1000 1500 2000 2500 3000 3500 4000

Shaft RPM
70 bar (1000 PSI) 210 bar (3000 PSI)

Volumetric Efficiency

100%

95%
Percent

90%

85%

80%
0 500 1000 1500 2000 2500 3000 3500 4000

Shaft RPM
70 bar (1000 PSI) 210 bar (3000 PSI)

EATON Hydraulics Medium Duty Piston Motors Technical Focus E-MOPI-TM001-E1 January 2005 15
Model 74318

Performance Data

Input Flow
50 180
40 150
30 120

l/min
GPM

90
20
60
10 30
0 0
500 750 1100 1500 1750 2250 2500 3000 3500 3600

Shaft RPM
70 bar (1000 PSI) 210 bar (3000 PSI)

Output Torque
1200
120
1000
lbf - in

800 90

N-m
600
60
400
200 30
500 750 1100 1500 1750 2250 2500 3000 3500 3600

Shaft RPM

70 bar (1000 PSI) 210 bar (3000 PSI)

Output Power
60
40
50
40 30
hp

kW

30 20
20
10 10
0 0
500 750 1100 1500 1750 2250 2500 3000 3500 3600

Shaft RPM

70 bar (1000 PSI) 210 bar (3000 PSI)

16 EATON Hydraulics Medium Duty Piston Motors Technical Focus E-MOPI-TM001-E1 January 2005
Model 74328

Performance Data
The charts below are repre-
sentative of a 49,2
cm3/r[3.00 in3/r] displace-
ment piston motor. The
tests were run at an oil tem-
perature of 50o C [120oF]
with viscosity 19-24 cSt [117-
143 SUS].

Overall Efficiency

100%

90%
Percent

80%
70%
60%
0 500 1000 1500 2000 2500 3000 3500 4000

Shaft RPM
70 bar (1000 PSI) 210 bar (3000 PSI)

Volumetric Efficiency

100%

95%
Percent

90%

85%

80%
0 500 1000 1500 2000 2500 3000 3500 4000

Shaft RPM
70 bar (1000 PSI) 210 bar (3000 PSI)

EATON Hydraulics Medium Duty Piston Motors Technical Focus E-MOPI-TM001-E1 January 2005 17
Model 74328

Performance Data

Input Flow
50 180
40 150
30 120

l/min
GPM

90
20
60
10 30
0 0
500 750 1000 1500 1750 2250 2500 3000 3250 3600

Shaft RPM
70 bar (1000 PSI) 210 bar (3000 PSI)

Output Torque
1400 160
1200
1000 120
lbf - in

800

N-m
80
600
400 40
200
0 0
500 750 1000 1500 1750 2250 2500 3000 3250 3600

Shaft RPM

70 bar (1000 PSI) 210 bar (3000 PSI)

Output Power
70 60
60
50 45
40
hp

kW

30
30
20 15
10
0 0
500 750 1000 1500 1750 2250 2500 3000 3250 3600

Shaft RPM

70 bar (1000 PSI) 210 bar (3000 PSI)

18 EATON Hydraulics Medium Duty Piston Motors Technical Focus E-MOPI-TM001-E1 January 2005
Fixed Displacement
Motor
743XX Model
Code
2 Bolt SAE “B” Mount
32,9 cm3/r[2.01 in3/r]
Displacement
40,6 cm3/r[2.48 in3/r]
Displacement
49,2 cm3/r[3.00 in3/r]
Displacement

A A J A A A A 0 B 0 0 0 A 0 0

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

1 2 3 Code Title 6 Main Port, Size, & Location 8 Auxiliary Mounting 10 11 Special Features
AAJ - 40,6 cm3/r [2.48 in3/r] A - 1-1/16-12-12 UN-2B Features (rear) 00 - No special feature,
Fixed displacement pis- straight thread o-ring 0 - No Auxiliary Mounting (std.)
ton motor frame size ports- opposite sides, Feature (std.) AD - Shuttle Valve and
AAK - 49,2 cm3/r [3.0 in3/r] (opt.) 1* - Straight through shaft, Charge Pressure Valve
Fixed displacement pis- B - 1-5/16-12 UN-2B dia. 22,23 [.875], with set at 15-17 bar [220-
ton motor frame size straight thread o-ring keyway 4,75 x 26,9 250 lbf/in2), (opt.)
ports- opposite sides, [.187 x 1.06] (key includ- AM - Shuttle Valve and
4 5Output Shaft (std.) ed, 19 [.75] long). Side Charge Pressure Valve
AA - 13 Tooth 16/32 spline C - 1-5/16-12 UN-2B set at 10-12 bar [150-
Mounting Pad holes
shaft extension 41,1 straight thread o-ring 175 lbf/in2], (opt.)
both sides, 4 x .3125-
[1.62], (std.) ports- rear, (std.) AP - Speed Sensor Hall
18.
AB - 15 Tooth 16/32 spline, D - 1-5/16-12 UN-2B Note: Requires the selection in Effect Pickup (9 pulse),
shaft extension 46 straight thread o-ring position 6 of same side porting.
(opt.) lead wire 127mm
[1.81], (opt.) ports- same side, Top, [5.0in] long,(opt.)
AD - Straight Shaft, dia. 28, (opt.) 9 CA - Speed Sensor, Hall
Displacement Options
58 [1.125], keyway 7,9 E - 1-1/16-12 UN-2B Effect Pickup (9 pulse)
0 - As given in code title,
[.31] x 32,5 [1.28], shaft straight thread o-ring 40,6 cm3/r [2.48 in3r] - with M12 connector
extension 46 [1.81] (key ports- rear, (opt.) Model 74318 or 74348, (opt.)
included), (opt.) J - 1-1/16-12 UN-2B (std.)
AE - Straight Shaft, dia. 22,2 straight thread o-ring A - 32,9 cm3/r [2.01 in3/r] 12 13 Paint
[.875]., keyway 6,3 [.25] ports- same side, Top, destroked from 40,6 0A - Primer, (std.)
x 24, 6 [.97], shaft (opt.) cm3/r [2.48 in3/r] - Model 0B - Black Paint, (std.)
extension 41,1 [1.62] 74315, (opt.)
7 Drain Port, Size, & Location
(key included), (std.)
A - 3/4-16 UNF-2B straight B - 24 cm3/r [1.50 in3/r] 14 Identification
thread o-ring port - Top destroked from 40, 6 0 - Standard, (std.)
of Housing, (std.) cm3/r [2.48], (opt.)
B - 3/4-16 UNF-2B straight 15 Design Code
thread o-ring port - Top 0 - Eaton assigns current
and bottom of Housing, design code, (std.)
bottom plugged, (opt.)
G - 3/4-16 UNF-2B straight
thread o-ring port -
upper rear of Backplate,
(opt.)
J - 9/16-18 UNF-2B straight
thread o-ring port-upper
rear of Backplate, (opt.)

Fixed displacement piston motors are specified by the follow-

ing model code. Once a motor is built from the model code, a
product number will be assigned to that configuration. Make
sure all positions are selected within the 15 digit code for each
motor.

EATON Hydraulics Medium Duty Piston Motors Technical Focus E-MOPI-TM001-E1 January 2005 19
Model 74315,
74318 and 74328

Installation Drawings

Output Shafts -
Used for all 743XX Models
(Code position 4,5)

Spline Shaft Code Spline Shaft Code

Selection AA Selection AB
Maximum Torque on Shaft Maximum Torque on Shaft
209,3 N•m [1,852 lbf•in] 337,5 N•m [2,987 lbf•in]

41.1 46
[1.62] [1.81]

21.81 [.858] 24.98 [.984]

Major Dia. Major Dia.

13 Tooth 15 Tooth
16/32 DP 30° involute flat root, 16/32 DP 30° involute flat root,
class 1 side fit spline class 1 side fit spline
SAE J498b (effective 1972) SAE J498b (effective 1972)

Spline Shaft Code Spline Shaft Code

Selection AD Selection AE
Maximum Torque on Shaft Maximum Torque on Shaft
337,5 N•m [2,987 lbf•in] 209,3 N•m [1,852 lbf•in]

46 41.1
[1.81] [1.62]

6.4 [.25] 6.4 [.25]

7.89 [.311] x 6.3 [.25] x
31.8 [1.25] 31.98 24.6 [.97] 25.04
Keyway [1.259] Keyway [.986]

22.23 [.875]
28.55 Dia.
[1.124]
Dia.

Note: All ports are SAE (J1926) o-ring ports. Dimensions are in
millimeters [inches], unless otherwise specified.

20 EATON Hydraulics Medium Duty Piston Motors Technical Focus E-MOPI-TM001-E1 January 2005
Model 74315,
74318 and 74328

Installation Drawings

Opposite Side Porting

(Code position 6, selection A
or B)

207.3 Case Drain

[8.16] (Optional Front)
177.3 174.8
[6.98] 60 [6.88]
[2.36] 9.5 Case
Case Drain Port [.38] 146 Drain
(Optional Upper Rear) Work Port-D 12.6 [5.75]
(Optional Side) [.50] (Optional
Front)
30.2
[1.19]
66.5 66.3 64.7 71.9
[2.62] 132.6 [2.61] [2.55] [2.83]
[5.22]
ø 101.57±.03
66.8 [3.999±.001] 64.8
[2.63] 30.2 [2.55]
[1.19] 2x ø 14.53±.13
Case Drain Port Work Port-C [.572±.005]
(Optional Lower Rear) (Optional Side)

Rear Porting
(Code position 6, selection C
or D)
Directional arrow, stamped on side of case next
to work port, shows motor rotation relationship
Rear Location to work port when port is pressurized.
Work Port 133.4 [5.25]
Std. 1-5/16 - 12 UN-2B Drain Port 66.5
Drain Port View A-A Std. 3/4-16 UNF-2B Right
(Opt. Upper Rear) [2.62]
(Opt. Top and/or Bottom w/ Bottom Plugged) Side
A A

136.7 146
[5.38] 60.5 101.57 ± .03 [5.75]
[3.999 ± .001] Bottom
[2.38] Dia. 174.8 Top
[6.88]

B B For Shaft Configuration, Left Side

9.7 [.38] see separate shaft
30.2 installation drawings 64.8
[1.19] View B-B 12.7 [.50] 2.55]
Rear Location 205.2 [8.08]
Work Port Mounting Hole for
Std. 1-5/16 - 12 UN-2B 12.7 [.50] Dia. Bolts (2)

Note: All ports are SAE (J1926) o-ring ports. Dimensions are in
millimeters [inches], unless otherwise specified.

EATON Hydraulics Medium Duty Piston Motors Technical Focus E-MOPI-TM001-E1 January 2005 21
Model 74315,
74318 and 74328

Installation Drawings

Same Side Porting

(Code position 6, selection D)

Directional arrow, stamped on side of case next

to work port, shows motor rotation relationship Drain Port
to work port when port is pressurized. 3/4 - 16 UNF-2B
(Opt. Top and /or Bottom) 147.8 [5.82]
Work Port View A-A 81.3
Std. 1-5/16 - 12 UN-2B [3.20] Right
59.9 [2.36] Side
A A
53.8
[2.12]
146
101.57 ± .03 [5.75]
[3.999 ± .001] Bottom
Dia. 174.8
[6.88] Top

B B Left
For Shaft Configuration,
9.7 [.38] see separate shaft Side
View B-B 12.7 [.50] installation drawings 64.8
Work Port [2.55]
Std. 1-5/16 - 12 UN-2B 167.4 [6.59]
195.1 [ 97.68] Mounting Hole for
12.7 [.50] Dia. Bolts (2)

Note: All ports are SAE (J1926) o-ring ports. Dimensions are in
millimeters [inches], unless otherwise specified.

22 EATON Hydraulics Medium Duty Piston Motors Technical Focus E-MOPI-TM001-E1 January 2005
Model 74315,
74318 and 74328

Installation Drawings

Same Side Porting w/

Shuttle Valve and Charge
Pressure Valve Directional arrow, stamped on side of case next
(Code position 10, 11 selec- to work port, shows motor rotation relationship
to work port when port is pressurized.
tion AD or AM) Drain Port
Charge Pressure Valve 3/4-16 UNF-2B
82 (Opt. Top and /or Bottom
[3.23] w/ Bottom Plugged)
Same Side Location View A-A
79.6 Work Port 59.9 [2.36]
[3.13] Std. 1-5/16-12 UN-2B
A A
32.5
[1.28]
101.57 ± .03
120.7 [3.999 ± .001]
[4.75] Dia.
26° 41’

B B
9.7 [.38]
Shuttle Valve Housing View B-B 12.7 [.50] For Shaft Configuration,
see separate shaft
Same Side Location 155.6 [6.13] installation drawings
Work Port 167.4 [6.59]
Std. 1-5/16-12 UN-2B
195.1 [7.68]

81.3
[3.20]

146
[5.75]
Bottom
174.8 Top
[6.88]
The shuttle and charge pressure valve work together to
bypass closed loop oil. This allows the oil to be cooled, fil-
tered, and returned to tank.
The shuttle valve flow is listed below in relationship to the 64.8 71.9
charge pressure valve setting. [2.55] [2.83]

CHARGE PRESSURE FLOW CODE SELECTION Mounting hole for

10 to 12 bar 5,68 to 9,46 l/m AM 12.7 [.50] Dia. Bolts (2)
[145 to 175 lbf/in2] [1.5 to 2.5 gal/min]
15 to 17 bar 9,46 to 13,25 l/m AD
[220 to 250 lbf/in2] [2.5 to 3.5 gal/min]

Note: All ports are SAE (J1926) o-ring ports. Dimensions are in
millimeters [inches], unless otherwise specified.

EATON Hydraulics Medium Duty Piston Motors Technical Focus E-MOPI-TM001-E1 January 2005 23
Model 74348

Installation Drawings

Same Side Porting w/

Through shaft for brake
mounting Directional arrow, stamped on side of case next
to work port, shows motor rotation relationship
(Code position 6, selection D) to work port when port is pressurized.
(Code position 8, selection 3) Work Port Std. View A-A
1-5/16-12 UN-2B Drain Port
9/16-18 UNF-2B
53.8 (Opt. Top and /or Bottom
[2.12] A A
6.4 [.25] w/ Bottom Plugged)
4.75
[.187]
101.57 ± .03
[3.999 ± .001]
Dia.
6.35
122.22 ± .005 [.25]
24.31 ± .13 [.8748 ± .0002]
[.957 ± .005] 19.1 B B
Dia.
Dia. [.75] 9.7 [.38]
View B-B 12.7 [.50] For Shaft
Configuration,
152.4 [6.00] see separate shaft
167.4 [6.59] installation drawings
Output 195.1 [7.68]
Shaft Work Port Std.
1-5/16-12 UN-2B 221.7 [8.73]
Au xiliar y
Shaft

147.8 [5.82]
81.3
[3.20] Right
Side

146
120.7 [5.75]
[4.75] Bottom
174.8 Top
[6.88]

20.6 Left
[.81] Side
64.8
5/16-18 UNC-2B to 15,0 [.59] Depth [2.55]
(2 each side)
Mounting Hole for
12.7 [.50] Dia. Bolts (2)

Note: All ports are SAE (J1926) o-ring ports. Dimensions are in
millimeters [inches], unless otherwise specified.

24 EATON Hydraulics Medium Duty Piston Motors Technical Focus E-MOPI-TM001-E1 January 2005
Model 743XX

Installation Drawings

Motor Speed Sensor

(Code position 10, 11 The Hall Effect speed sensor The rugged design is fully
selection AP) is compatible with the protected against reverse
mobile vehicle electrical sys- polarity or short circuit hook
tems and gives a reliable dig- up. A built-in pull up resistor
ital on/off signal over a wide simplifies installation with
speed and temperature control systems.
range. The motor speed sensor is a
factory installed option.

C
B
A
Red Power
Wire Length
Pin A Supply (+) 127.0 [5.00]

10K
Optional Drain Port
Location
White Signal
Pin B Output

Sensor

Black
Common
Pin C

Optional Drain Port

Location

SPECIFICATION
Supply Voltage: (Vs) 12 Volt DC (Nominal Vehicle Power)
Supply Current: (Is) 20 mA (including internal pull up resistor)
Output Voltage High: Supply Voltage minus 0.5 Volt DC min.
(Open Collector with 10k pull up resistor)
Output Voltage Low: (Vol) 0.5 Volt DC Maximum at 10 mA
Min. Shaft RPM: 50
Pulses per Revolution: 9
CONNECTION REQUIREMENTS
Cable: 18 AWG Recommended wire .100 nominal O.D. for proper seal, 1
black, 1 red, 1 white.
Packard Electric Weather Pack Series: Mating female assembly
#12015793 connector and #12089188 terminal (3).
Note: All ports are SAE (J1926) o-ring ports. Dimensions are in
millimeters [inches], unless otherwise specified.

EATON Hydraulics Medium Duty Piston Motors Technical Focus E-MOPI-TM001-E1 January 2005 25
Model 743XX

Installation Drawings

Motor Speed Sensor - M12

(Code position 10, 11
selection CA)

Eaton has developed a This sensor has reverse

speed sensor, based on the polarity protection, short cir-
field proven technology of cuit protection, load dump M12 End
our Hall Effect and Magnetic protection, and EMC
sensor. (Electrical Magnetic
Output – Digital signals from Capability) protection (the
NPN transistors (open collec- customer should qualify the
tor output with internal 10K EMC protection in their spe-
pull up resistors). cific application)
Supply Voltage: 8 to 24 Volt
DC (compatible with 12V
vehicle conditions)

PIN 2
PIN 3

Power Sup-
(+)
PIN 1 ply PIN 1 SPECIFICATION
10K PIN 4
Supply Voltage: (Vs) 12 Volt DC (Nominal Vehicle Power
Signal 8 to 24 V DC)
Output Supply Current: (Is) 20 mA (including internal pull up resistor)
PIN 4
Output Voltage High: (Open Collector with 10k pull up resistor)
Sensor Output Voltage Low: (Vol) 0.5 Volt DC Maximum at 10 mA
Common Min. Shaft RPM: 50
PIN 3 Pulses per Revolution: 9
Output circuit wiring instruc- CONNECTION REQUIREMENTS
tions Mates with DC Micro
connectors or equivalent: Turk Eurofast WKCV 4T cable
Brad Harrison Micro-Change single keyway plugs
Lumberg Micro style 12mm DC connector

Note: All ports are SAE (J1926) o-ring ports. Dimensions are in
millimeters [inches], unless otherwise specified.

26 EATON Hydraulics Medium Duty Piston Motors Technical Focus E-MOPI-TM001-E1 January 2005
Fixed Displacement
Motor
746XX Models

2 Bolt SAE “B-B” Mount

82,6 cm3/r[5.04 in3/r]
Displacement

TYPICAL PRODUCT NUMBER MODEL CODE

74624-DAH AAZAAAA0000A0B
74624-DAV AAZAABB0000A0B
74644-DAJ AAZAABBA000A0B
74624-DAB AAZADAA0000A0B
74644-DAJ AAZAABBA000A0B

SPECIFICATIONS MODEL 74624/74644

Maximum Displacement 82,6 cm3/r [5.04 in3/r]
Maximum Rated Speed 1500 RPM
Continuous Rated Pressure † 240 bar [3500 lbf/in2]
Maximum Rated Pressure †† 240 bar [3500 lbf/in2]
Maximum Intermittent Pressure ††† 265 bar [3900 lbf/in2]
Input Flow at Rated Speed and Pressure 129 l/min [34 GPM]
Output Power at Rated Speed and Pressure 43,3 kW [58.0 hp]
Output Torque at Rated Speed and Pressure 280,3 N•m [2481 lbf•in]
Continuous Allowable Case Pressure 7 bar [100 lbf/in2]
Continuous Inlet Temperature 107°C [225°F]
Weight/Single Motor (approximate) 10,9 kg [24 lbs]

† Continuous Rated Pressure - Motor may run uninterrupted at this pressure.

†† Maximum Rated Pressure - Highest allowable system pressure. (High pressure
relief valve setting)
††† Maximum Intermittent Pressure - A pressure spike only for a short period of time,
not continuous.

EATON Hydraulics Medium Duty Piston Motors Technical Focus E-MOPI-TM001-E1 January 2005 27
Model 74624

Performance Data
The charts below are repre-
sentative of a 82,6 cm3/r
[5.04 in3/r] displacement pis-
ton motor. The tests were
run at an oil temperature of
80o C [180oF] with viscosity
7-9 cSt [50-54 SUS].

Overall Efficiency

100%

90%
Percent

80%

70%
60%
0 250 500 750 1000 1250 1500 1750

Shaft RPM
140 bar (2000 PSI) 240 bar (3500 PSI)

Volumetric Efficiency

100%

90%
Percent

80%

70%

60%
0 250 500 750 1000 1250 1500 1750

Shaft RPM
140 bar (2000 PSI) 240 bar (3500 PSI)

28 EATON Hydraulics Medium Duty Piston Motors Technical Focus E-MOPI-TM001-E1 January 2005
Model 74624

Performance Data

Input Flow
35
30 120
105
25 90
20

l/min
GPM

75
15 60
10 45
5 30
0 15
50 125 250 500 750 1000 1250 1500

Shaft RPM
140 bar (2000 PSI) 240 bar (3500 PSI)

Output Torque
3000
325
2750
300
2500
lbf - in

275

N-m
2250 250
2000 225
1750 200
1500 175
50 125 250 500 750 1000 1250 1500

Shaft RPM

140 bar (2000 PSI) 240 bar (3500 PSI)

Output Power
80
70 50
60 40
50
N-m
hp

40 30
30 20
20
10 10
0 0
50 125 250 500 750 1000 1250 1500

Shaft RPM

140 bar (2000 PSI) 240 bar (3500 PSI)

EATON Hydraulics Medium Duty Piston Motors Technical Focus E-MOPI-TM001-E1 January 2005 29
Fixed Displacement
Motor
746XX Models

82,6 cm3/r[5.04 in3/r]

Displacement

A A Z A A A A 0 0 0 0 0 A 0

1 2 3 4 5 6 7 8 9 10 11 12 13 14

1 2 3Code Title 6 Main Port, Size, & Location 8 Auxiliary Mounting 9 10 Special Features
AAZ - 82, 6 cm3/r [5.04 in3/r] A - 1-1/16-12 UN-2B straight Features (rear) 00 - No Special Features, (std.)
High Torque Fixed dis- thread o-ring ports- rear, 0 - No Auxiliary Mounting
placement piston motor (std.) Feature - Model 74624,
11 12 Paint
frame size B - 1-1/16 UN-2B straight (std.)
thread o-ring ports- A* - Straight through shaft, 0A - Primer, (std.)
4 5 Output Shaft 0B - Black Paint, (std.)
same side, top, (opt.) dia. 25,4 [1.00], with
AA - Straight Shaft, dia. 25,4 keyway 6,35 x 25,4
[1.00], keyway 6,30 7 Drain Port, Size, & Location [.250 x 1.00], Shaft 13
[.248] x 37,3 [1.47, shaft A - 9/16-18 UNF-2B straight length from mounting Identification
extension 63,5 [2.50] thread o-ring port - flange 274,3 [10.80] (key 0 - Standard, (std.)
(key included), (std.) Horizontal top rear of included); 2 mounting
unit, (std.) 14 Design Code
AD - 15 Tooth 16/32 spline holes 5/16-18 UNC-2B
with snap ring groove, B - 9/19-18 UNF-2B straight Thd, 13,3 [.53] min. full 0 - Eaton assigns current
shaft extension 46 thread o-ring port - thread (bottom rear of design code, (std.)
[1.81], (std.) Vertical top rear of unit, unit) - Model 74644,
(opt.) (opt.)
C* - 15 Tooth 16/32 spline, * Requires the selection of same side
shaft length from porting only.
mounting flange 258,6 Note: All ports are SAE (J1926) o-ring
[10.18]; 2 mounting ports.
holes 5/16-18 UNC-2B
Thd, 13,3 [.53] min. full
Thd (bottom rear of unit)
- Model 74644, (opt.)

High torque fixed displacement piston motors are specified by

the following model code. Once a motor is built from the
model code, a product number will be assigned to that configu-
ration. Make sure all positions are selected within the 14 digit
code for each motor.

30 EATON Hydraulics Medium Duty Piston Motors Technical Focus E-MOPI-TM001-E1 January 2005
Model 74624 and
74644

Installation Drawings

Rear Porting
(Code position 6, selection A)

Directional arrow stamped next to work ports, shows motor

4.8 [.19] rotation relationship to work port when port is pressurized
47.8 Drain Port 65.1 65.1
[1.88] For Shaft Configuration, [2.56] [2.56]
9/16-18 UNF-2B (Opt. Rear) See Separate Shaft
Installation Drawings.

146
101.57 ± .03 [5.75]
71.4 [3.999 ± .001]
[2.81] Dia.
174.8
[6.88] 73
[2.88]

Rear Location for 9.7 [.38]

Work Ports 11.9 [.47]
1-1/16-12 UN-2B 207 [8.15] Mounting hole for
208.3 [8.20] 12.7 [.50] Dia. Bolts (2)

Output Shafts
used for all 746XX models
(Code position 4, 5 selection
AA or AD)

Spline Shaft Spline Shaft

(Code selection AA) (Code selection AD)
Maximum Torque on Shaft Maximum Torque on Shaft
Shaft AA - 337,5 N•m [2987 Shaft AA - 337,5 N•m [2987
lbf•in] lbf•in]
63.5 46
[2.50] [1.81] 1.22 [.048]
6.4 [.25]
6.3 [.248] x 1.52 [.0601]
37.3 [1.47] Keyway
23.88 [.94]
28.09 groove dia.
[1.106]
25.4 [1.00]
25.35 Major Dia.
[.999] Dia.
15 Tooth , 16/32 DP, 30° involue flat root,
class 1 major dia. fit spline
Note: All ports are SAE (J1926) o-ring ports. Dimensions are in SAE J498b (effective 1972)
millimeters [inches], unless otherwise specified.

EATON Hydraulics Medium Duty Piston Motors Technical Focus E-MOPI-TM001-E1 January 2005 31
Model 74624

Installation Drawings

Same Side Porting

(Code position 6, selection B)

Directional arrow, stamped next to work

port, shows motor rotation relationship to 236.7 [9.31]
work port when port is pressurized.
215.9 [8.50]
205.2 [8.08]
66.5 11.9 [.47]
[2.62] 9.7 [.38]

146
[5.75] 111.8
[4.40] 101.57 ± .03
[3.999 ± .001]
174.8 Dia.
[6.88] 73
[2.88]

For Shaft
Drain Port Configuration,
9/16-18 UNF-2B See Separate
65.8 68.3 Top Locations for Shaft Installation
[2.59] [2.69] Work Ports (Opt. Top Rear)
Drawings.
1-1/16-12 UN-2B
Mounting hole for
12.7 [.50] Dia. Bolts (2)

Note: All ports are SAE (J1926) o-ring ports. Dimensions are in
millimeters [inches], unless otherwise specified.

32 EATON Hydraulics Medium Duty Piston Motors Technical Focus E-MOPI-TM001-E1 January 2005
Model 74644

Installation Drawings

Through Shaft for Brake

Mounting
(Code position 8, selection A
or C)

Drain Port
9/16-18 UNF-2B
(Opt. Top Rear)

6.3 [.248] 24.6 [.97]

6.4 [.25]
28.09
[1.106]

65
[2.56] 22.35
[.999] Dia.
Keyed
20.6 [.81] (code
position 8, 202.2 [7.96]
41.3 [1.62] selection A) 274.3 [10.80]
5/16-18 UNC-2B
Depth 13.5 [.53] Min. Full Thd. (2)

15 Tooth, 16/32 DP, 30° involute

flat root class 1 side fit spline
SAE J498b (effective 1972)
(code position 8, selection C)

258.6 [10.18]

Note: All ports are SAE (J1926) o-ring ports. Dimensions are in
millimeters [inches], unless otherwise specified.

EATON Hydraulics Medium Duty Piston Motors Technical Focus E-MOPI-TM001-E1 January 2005 33
Fixed Displacement
Motor
713XX Models

40,6 to 21,0 cm3/r[2.48 to 1.28

in3/r] Displacement

TYPICAL PRODUCT NUMBER MODEL CODE

71302-DAP AAMAB140H000A0C
71302-DAE AAMAB330D000A0C
71302-DAK AAMBA110C000A0C
71392-DAE AAMGA110M000A0C
71392-DAE AAMGA110M000A0C
71392-DAC AAMGA210D000A0C
71392-DAJ AAMGA210H000A0C
71392-DAB AAMGA260H000A0C

SPECIFICATIONS MODEL 71302/71392

Maximum Displacement 40,6 to 21,0 cm3/r
[2.48 to 1.28 in3/r]
Maximum Rated Speed 3600 RPM at 17° Conrol
Angle
4500 RPM at 9° Control
Angle
Continuous Rated Pressure † 210 bar [3000 lbf/in2]
Maximum Rated Pressure †† 345 bar [5000 lbf/in2]
Maximum Intermittent Pressure ††† 370 bar [5400 lbf/in2]
Input Flow at Rated Speed and Pressure 126,4 l/min [34 GPM]
at 17° Control Angle
Output Power at Rated Speed and Pressure 38,8 kW [52.0 hp]
at 17° Control Angle
Output Torque at Rated Speed and Pressure 127 N•m [1125 lbf•in]
at 17° Control Angle
Continuous Allowable Case Pressure 1,7 bar [25 lbf/in2]
Continuous Inlet Temperature 107°C [225°F]
Weight/Single Motor (approximate) 9,5 kg [21 lbs]

† Continuous Rated Pressure - Motor may run uninterrupted at this pressure.

†† Maximum Rated Pressure - Highest allowable system pressure. (High pressure
relief valve setting)
††† Maximum Intermittent Pressure - A pressure spike only for a short period of time,
not continuous.

34 EATON Hydraulics Medium Duty Piston Motors Technical Focus E-MOPI-TM001-E1 January 2005
Model 71302

Performance Data
@ 7° 35’ Control Angle

Performance Data
The charts below are repre-
sentative of a 18 cm3/r [1.10
in3/r] variable displacement
piston motor at 7o 35’ con-
trol angle. The tests were
run at an oil temperature of
50o C [120oF] with viscosity
19-24 cSt [117-143 SUS].

Overall Efficiency

100%

90%
Percent

80%
70%
60%
0 500 1000 1500 2000 2500 3000 3500 4000 4500 5000

Shaft RPM
70 bar (1000 PSI) 210 bar (3000 PSI)

Volumetric Efficiency

100%

95%
Percent

90%

85%

80%
0 500 1000 1500 2000 2500 3000 3500 4000 4500 5000

Shaft RPM
70 bar (1000 PSI) 210 bar (3000 PSI)

EATON Hydraulics Medium Duty Piston Motors Technical Focus E-MOPI-TM001-E1 January 2005 35
Model 71302

Performance Data
@ 7° 35’ Control Angle

Input Flow
25 90
20 75
15 60

l/min
GPM

45
10
30
5 15
0 0
500 750 1000 1500 2000 2500 3000 3500 4000 4500

Shaft RPM
70 bar (1000 PSI) 210 bar (3000 PSI)

Output Torque
500
50
400
40
lbf - in

300
30

N-m
200 20
100 10
0 0
500 750 1000 1500 2000 2500 3000 3500 4000 4500

Shaft RPM

70 bar (1000 PSI) 210 bar (3000 PSI)

Output Power
35 25
30
25 20
20 15
hp

kW

15 10
10
5 5
0 0
500 750 1000 1500 2000 2500 3000 3500 4000 4500

Shaft RPM

70 bar (1000 PSI) 210 bar (3000 PSI)

36 EATON Hydraulics Medium Duty Piston Motors Technical Focus E-MOPI-TM001-E1 January 2005
Model 71302

Performance Data
@ 17° Control Angle

Performance Data
The charts below are repre-
sentative of a 40.6 cm3/r
[2.48 in3/r] variable displace-
ment piston motor at 17o
control angle. The tests
were run at an oil tempera-
ture of 50o C [120oF] with
viscosity 19-24 cSt [117-143
SUS].

Overall Efficiency

100%

90%
Percent

80%
70%
60%
0 500 1000 1500 2000 2500 3000 3500 4000

Shaft RPM
70 bar (1000 PSI) 210 bar (3000 PSI)

Volumetric Efficiency

100%

95%
Percent

90%

85%

80%
0 500 1000 1500 2000 2500 3000 3500 4000

Shaft RPM
70 bar (1000 PSI) 210 bar (3000 PSI)

EATON Hydraulics Medium Duty Piston Motors Technical Focus E-MOPI-TM001-E1 January 2005 37
Model 71302

Performance Data
@ 17° Control Angle

Input Flow
50 180
40 150
30 120

l/min
GPM

90
20 60
10 30
0 0
500 750 1000 1500 2000 2500 3000 3500

Shaft RPM
70 bar (1000 PSI) 210 bar (3000 PSI)

Output Torque
1200
120
1000
lbf - in

800 90

N-m
600
60
400
200 30
500 750 1000 1500 2000 2500 3000 3500

Shaft RPM

70 bar (1000 PSI) 210 bar (3000 PSI)

Output Power
60
40
50
40 30
hp

kW

30 20
20
10 10
0 0
500 750 1000 1500 2000 2500 3000 3500

Shaft RPM

70 bar (1000 PSI) 210 bar (3000 PSI)

38 EATON Hydraulics Medium Duty Piston Motors Technical Focus E-MOPI-TM001-E1 January 2005
Fixed Displacement
Motor
713XX Models

40,6 cm3/r[2.48 in3/r]

Displacement

A A M A A 1 1 0 H 0 0 0 A 0 0

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

1 2 3
Code Title 5 Output Shaft 8 Auxiliary Mounting 10 11 Special Features
AAM- 40, 6 cm3/r [2.48 in3/r] A - 13 Tooth 16/32 spline, Features (rear) 00 - No special feature,
Variable displacement shaft extension 41,1 0 - No Auxiliary Mounting (std.)
piston motor frame size [1.62], (std.) Feature, (std.)
1* - 13 Tooth 16/32 Ext. 12 13 Paint
4 B - 13 Tooth 16/32 spline,
Control Options Tapered spline with 0A - Primer, (std.)
with snap ring groove,
A - Control Shaft 25,3 [.996] tapped hole, bottom 0B - Black Paint, (std.)
shaft extension 41,1
Dia. left of centerline [1.62], (opt.) pad with 5/16-18 UNC-
with through hole 9,6 2B mouning holes, 14
[.378] Dia., (std.) 6 Identification
Main Port, Size, & Location (opt.)
B - Control Shaft 25,3 [.996] 0 - Standard, (std.)
1 - 1 1/16-12 UN-2B
Dia. right of centerline straight thread o-ring 9 Min-Max Displacements & 15 Design Code
with through hole 9,6 ports - Rear, (std.) Control Angles
[.378] Dia., (std.) 2 - 1 1/16-12 UN-2B C - 12,3 to 40.6 cm3/r [.70 0 - Eaton assigns current
C - Control Shaft 19,05 straight thread o-ring to 2.48 in3/r], 5o 17’ design code, (std.)
[.750] Dia. right of cen- ports - Opposite Sides, maximum - 9o 0’ mini-
terline with keyway (std.) mum control angle, * Requires the selection of opposite side
(std.) porting only.
4,88 x 30,2 [.192 x
1.19], (opt.)
7 Drain Port, Size, & Location D - 17,9 to 40,6 cm3/r [1.09 Note: All ports are SAE (J1926) o-ring
D - Control Shaft 19.05 1 - 9/16-18 UNF-2B straight to 2.78 in3/r],7o 40’ ports.
thread o-ring port - maximum - 9o 0’ mini-
[.750] Dia. right of cen- mum control angle,
terline with keyway Right Side, (std.)
3 - 9/16-18 UNF-2B straight (std.)
4,88 x 30,2 [.192 x H - 21,0 to 40,6 cm3/r [1.28
1.19], (opt.) thread o-ring port - Rear
to 2.48 in3/r], 17o 0’
F - Hydraulic De-stroke of Backplate, (opt.) maximum - 9o 0’ mini-
Conrol, Remote Port 4 - 9/16-18 UNF-2B straight mum control angle,
Down - Model 71392, thread o-ring port - (std.)
(opt.) Right Side and Left M - 27,9 to 40,6 cm3/r [1.7 to
G - Hydraulic De-stroke Side, (opt.) 2.48 in3/r], 11o 50’ maxi-
Control, Remote Port 6 - 9/16-18 UNF-2B straight mum - 9o 0’ minimum
thread o-ring port - Top, control angle, (std.)
Up - Model 71392, (opt)
(opt.)

Variable displacement piston motors are specified by the fol-

lowing model code. Once a motor is built from the model
code, a product number will be assigned to that configuration.
Make sure all positions are selected within the 15 digit code for
each motor.

EATON Hydraulics Medium Duty Piston Motors Technical Focus E-MOPI-TM001-E1 January 2005 39
Model 71302 and
71392

Installation Drawings

Control Shaft and Location Control Shaft and Location

(Code position 4, selection A (Code position 4, selection C
or B) or D)
Shown: Right side location Shown: Right side location
at full control angle. at full control angle.

122.7 [4.83]
25.30 [.996] 19.05 [.75] Dia.
114.3 [4.5] 30.2 [1.19]
9.7 [.38] 4.88 [.192]
Dia.
17° 0’

Center line Center line

17° 0’ of drive shaft 16.34
of drive shaft
[.644]
14.2 [.56] 31.8 [1.25]

Spline Shaft Spline Shaft

(Code selection A) (Code selection B)
Maximum Torque on Shaft Maximum Torque on Shaft
209,3 N•m [1,852 lbf•in] 209,3 N•m [1,852 lbf•in]

41.1
[1.62] 41.1 1.22 [.048]
[1.62] 2.36 [.093]

19.35 [.762] groove dia.

21.81 [.858]
13 Tooth Major Dia.
16/32 DP 13 Tooth
flat root 16/32 DP 30° involute
SAE J498b (effective 19 flat root, class 1 side fit spline
SAE J498b (effective 1972)

Note: All ports are SAE (J1926) o-ring ports. Dimensions are in
millimeters [inches], unless otherwise specified.

40 EATON Hydraulics Medium Duty Piston Motors Technical Focus E-MOPI-TM001-E1 January 2005
Model 71392

Installation Drawings

Hydraulic De-stroke Port D

Control
(Code position 4, selection F A normally closed valve is
Port F
or G) required to provide maxi-
mum displacement to the
The Hydraulic De-stroke motor. The valves must be
Control feature allows the rated for maximum system
operator to control the motor pressure.
without any mechanical link-
age to the motor. Port E

Port C

Control Port up
(Code position 4, Selection G) Remote Control Port F
7/16-20 UNF-2B
Remote Control Port E
7/16-20 UNF-2B 205.6 [8.10]

90.9
[3.58] 86.6
[3.41]

218.3 [8.60]
Control Port Down
(Code position 4, Selection F)
Remote Control Port F
7/16-20 UNF-2B
218.3 [8.60]

90.9
[3.58]
38.8
[1.53]

Remote
Control
Port E
7/16-20 UNF-2B 205.6 [8.10]

Note: All ports are SAE (J1926) o-ring ports. Dimensions are in
millimeters [inches], unless otherwise specified.

EATON Hydraulics Medium Duty Piston Motors Technical Focus E-MOPI-TM001-E1 January 2005 41
Model 71302

Installation Drawings

Rear Porting
(Code position 6, Selection 1)

114.9 [4.52]
Drain Port
Drain Port 9/16-18 UNF-2B 74.6 [2.94]
16.8 9/16-18 Right
[.66] UNF-2B (option right side) 12.3 [.48]
Side 9.5 [.38]
(option rear)

53.3
[2.10] 101.57 ± .03
[3.999 ± .001]
Dia.

Rear Location for

Work Port 1-1/16-12 UN-2B Drain Port
35.69 9/16-18 UNF-2B
Left (option top)
[1.405] 71.4 Side
[2.81] Drain Port For Control
9/16-18 UNF-2B 180.2 [7.10]
Rear Location for Shaft Configuration,
Work Port 1-1/16-12 UN-2B (option left side) 195.4 [7.70] see separate control
Input port for righthand (CW) rotation. shaft drawings.
(rotation viewed from shaft end)

Max Control Angle 17°

174.8 [6.88]
Max Control Angle 9° 146 [5.75]

90.9
[3.58] Left Right
Side Side

72.2
[2.84]

For Shaft Configuration, Mounting hole for

see separate shaft 12.7 [.50] Dia. Bolts (2)
installation drawings.

Note: All ports are SAE (J1926) o-ring ports. Dimensions are in
millimeters [inches], unless otherwise specified.

42 EATON Hydraulics Medium Duty Piston Motors Technical Focus E-MOPI-TM001-E1 January 2005
Model 71302

Installation Drawings

Opposite Porting
(Code position 6, Selection 2)

Drain Port 114.9 [4.52]

9/16-18 UNF-2B
(option right side) 74.6 [2.94]
Right 12.3 [.48]
Side
9.5 [.38]

101.57 ± .03
[3.999 ± .001]
Dia.

Side Location for

Work Port Drain Port
84.1 1-1/16-12 UN-2B 9/16-18 UNF-2B
[3.31] Input Port for Righthand Left (option top)
(CW) rotation Drain Port Side For Control
168.1 [6.62] (rotation viewed from 9/16-18 UNF-2B Shaft Configuration,
Side Location for shaft end) (option left side) 171.4 [6.75]
Work Port see separate control
1-1/16-12 UN-2B 200 [7.87]
Input Port for Righthand (CW rotation shaft drawings.
(rotation viewed from shaft end)

Max Control Angle 17°

Min Control Angle 9° 174.8 [6.88]
146 [5.75]

90.9
[3.58] Left Right
Side Side

72.2
[2.84]

For Shaft Configuration, Mounting hole for

see separate shaft 12.7 [.50] Dia. Bolts (2)
installation drawings.

Note: All ports are SAE (J1926) o-ring ports. Dimensions are in
millimeters [inches], unless otherwise specified.

EATON Hydraulics Medium Duty Piston Motors Technical Focus E-MOPI-TM001-E1 January 2005 43
72450 Series
Servo Motor

A C T A D A 1 0 0 A 0 0 0 0 0

1 2 3 4 5 6 7 8 9 10 11

1 Code Title 4 Drain Port, Size, & Location 7 Min-Max Displacements 9 Special Features
AAZ - 40, 6 cm3/r [2.48 in3/r] A - 1-1/16-12 UN-2B SAE o- A - 20.5-40.6 cm3/r (1.25- 00 - None
Servo Controlled ring, left and right side 2.48 in3/r) 8o 45 min- 03 - Shuttle valve and back-
Variable Displacement B - 1-1/16-12 UN-2B SAE o- utes min. - 17o 0 pressure valve set 15.2-
piston motor ring. left and right side. minutes max. 17.2 Bar (220-250 PSI)
*** - 49,2 cm3/r (3.00 in3/r) Right side plugged. B - 22.5-40.6 cm3/r (1.37- rear facing S1, S2
Servo Controlled C - 1-1/16-12 UN-2B SAE o- 2.48 in3/r) 9o 34 min- servo control ports
Variable Displacement utes min. - 17o 0
ring, left and right side. ***04- Ref. code title
motor minutes max.
Left side plugged. 07 - Spring biased to max.
2 F - 24.5-49.2 cm3/r [1.49- displacement
Output Shaft 5 Main Port, Size, & Location 3.00 in3/r] 8o 34 min-
A - 13 Tooth 1/32 spline, utes min. - 17o 0
1 - 1-5/16-12 UN-2B SAE o- 10 Customer Identification
Shaft extension ring (A&B) same side minutes max. 0 - Standard, (std.)
41,4mm (1.62 in) (right side) G - 29.5-49.2 cm3/r [1.80-
3 2 - 1-5/16-12 UN-2B SAE o- 3.00 in3/r] 10o 28 min- 11
Auxiliary Mounting Design Code
Features (rear) ring (A&B) same side utes min. - 17o 0 0 - Eaton assigns current
(left side) minutes max.
0 - No Auxiliary Mounting design code, (std.)
Features
8 Paint
A - Diameter 22.22 mm 6
(.875 in) taper shaft Control Assembly 0A - Primer, (std.)
00 - No control assembly 0B - Black Paint, (std.)
Port plate control

44 EATON Hydraulics Medium Duty Piston Motors Technical Focus E-MOPI-TM001-E1 January 2005
72450 Series
Servo

Installation Drawings

Servo Motor with Shuttle Standard Servo Motor

Through Shaft
Same Side Porting

TYPICAL PRODUCT NUMBER MODEL CODE

72450-DAG-02 ACTA0B200B0B000B
72450-DAH-02 ACTA0A200B0B030B
72450-DAM-02 ACTA0B200F0B040B

SPECIFICATIONS MODEL 72450 MODEL 742XX

Maximum Displacement 40 cm3/r [2.48 in3/r] 49 cm3/r [3.00 in3/r]
Minimum RPM Rated Speed 4500 RPM at minimum 4500 RPM at minimum
stroke angle stroke angle
Maximum RPM Rated Speed 3600 RPM at maximum 3600 RPM at maximum
stroke angle stroke angle
Continuous Rated Pressure 210 bar [3000 lbf/in2] 172 bar [2500 lbf/in2]
Maximum Rated Pressure 345 bar [5000 lbf/in2] 310 bar [4500 lbf/in2]
Maximum Intermittent Pressure 345 bar [5000 lbf/in2] 310 bar [4500 lbf/in2]

Performance:
Max closed loop temp. 107° C (225°F)
Max allowable case pressure 1.72 Bar (25 PSI)

Note: All ports are SAE (J1926) o-ring ports. Dimensions are in
millimeters [inches], unless otherwise specified.

EATON Hydraulics Medium Duty Piston Motors Technical Focus E-MOPI-TM001-E1 January 2005 45
Eaton Eaton Eaton
14615 Lone Oak Road 20 Rosamond Road Dr.-Reckeweg-Str. 1
Eden Prairie, MN 55344 Footscray D-76532 Baden-Baden
USA Victoria 3011 Germany
Tel: 952 937-9800 Australia Tel: (49) 7221 682-0
Fax: 952 974-7722 Tel: (61) 3 9319 8222 Fax: (49) 7221 682-788
www.hydraulics.eaton.com Fax: (61) 3 9318 5714

© 2005 Eaton Corporation

All Rights Reserved
Printed in USA
Document No. E-MOPI-TM001-E1
January 2005