Aleosan National High School
GRADE 10 TLE- DRESSMAKING/TAILORING
QUARTER 2-First Summative Test
Name: ________________________________ Grade & Section: __________Score: _______
A. Multiple choice
Directions: Read the statement carefully. Write the letter before the number that best
describes the statement.
____1. In pinning pattern pieces, make sure that the straight grain should be checked
from the fabric edge.
a. pinning c. taking
b. measurement d. handling
____2. Where should marking fabrics be placed?
a. on the wrong side c. on the correct side
b. on the right side d. all of the above
____3. The following are marking tools used in fabric except one.
a. pencil c. tailor’s chalk
b. bee wax d. tracing wheel
____4. What is used to hold the fabric while cutting?
a. two hands c. one hand
b. one finger d. three fingers
____5. What is used in transferring lines to the fabric if tracing wheel is used?
a. dressmaker’s carbon paper c. bees wax
b. tailor’s chalk d. crayons
____6. Which of the following is the correct order in preparing the fabric before
cutting?
a. shrinking, hanging, straightening, pressing
b. shrinking, straightening, hanging, pressing
c. straightening, hanging, shrinking, pressing
d. straightening, shrinking, hanging, pressing
____7. What tool is used in pinning the patterns to the fabric?
a. pins c. hand needle
b. pin cushion d. machine needle
____8. This is used in transferring construction marking of the pattern to the fabric.
a. crayons c. tailor’s chalk
b. pencil d. tracing Wheel
____9. What is the first step to do before laying the patterns over the fabric?
a. hang c. soak
b. pre d. zigzag
____10. What is used in cutting the cloth?
a. blade c. embroidery scissors
b. cutting shear d. pinking shears
____11. What is the used as a guide in cutting the fabric?
a. shears c. patterns
b. pins d. tailor’s chalk
____12. What is referred to the arrangement of pattern pieces over the fabric?
a. cut c. track
b. mark d. layout
____13. What kind of material is garment made of?
a. cotton c. silk
b. linen d. wool
____14. What kind of fabric that can be pre-shrunk by laundering and drying?
a. knitted fabric c. permanently pressed fabric
b. Washable fabric d. dry cleanable fabric
____15. It is a piece of fabric applied to a garment to form a container.
a. ruffles c. patch pocket
b. rick rack d. tassel
___16. What is used in transferring lines to the fabric if tracing wheel is used?
a. dressmaker’s carbon paper c. bees wax
b. tailor’s chalk d. crayons
___17. What is used to hold the fabric while cutting?
a. two hands c. one hand
b. one finger d. three fingers
___18. The following are marking tools used in fabric except one.
a. pencil c. tailor’s chalk
b. bee wax d. tracing Wheel
____19. Where should marking fabrics be placed?
a. on the wrong side c. on the correct side
b. on the right side d. all of the above
____20. In pinning pattern pieces, make sure that straight grain should be
checked from the fabric edge.
a. pinning c. taking
b. measurement d. handling
B. Direction: Draw the following foundation patterns. (5pts. each)
21-25. Back Bodice
26-30. Front Bodice
31-35. Sleeve
Republic of the Philippines
DEPARTMAENT OF EDUCATION
REGION XII
SCHOOLS DIVISION OFFICE OF COTABATO
ALEOSAN NATIONAL HIGH SCHOOL
SENIOR HIGH SCHOOL DEPARTMENT
SAN MATEO, ALEOSAN, COTABATO
SECOND QUARTER
S.Y. 2020-2021
TABLE OF SPECIFICATIONS
GRADE 10- TLE DRESSMAKING/ TAILORING
Understanding
Remembering
Evaluating
# of Items
Analyzing
Applying
Creating
CONTENT/ LEARNING
COMPETENCIES
Lesson 1. Drafting and cutting
pattern for Ladies’ Blouse
Planning garment design for
Ladies’ Blouse #1-5 #21-35
35 #7-15 #6
#16-20
Total 35 10 9 1 15
Prepared by: Checked by:
RONALYN C. ACAS, T-1 MELINDA C. VILLENA, MT-11
Subject Teacher Subject Coordinator
