General Model PH20, FU20 and FU24

analog 4 in 1 pH sensor
Specifications

A family of wide body sensor is available for application in a wide

variety of processes. The sensors share the same valuable features:

• Long life saturated Ag/AgCl reference system.

• PTFE reference diaphragm to prevent fouling and reduce
measurement error.
• Double junction combined with ion-trap to prolong the
life of the reference probe even in chemically unfavorable
environments.
• Integral Pt1000 element for accurate temperature
measurements
• Platinum ORP/LE electrode for accurate simultaneous pH- and
ORP measurements.
• Polymerized electrolyte to extend the sensors life time.
• Versatile in-line, immersion or off-line installation.

For general iso baric and iso thermal purpose applications:

FU20(F)
The FU20 combination sensor shows how Yokogawa applies
the motto “Simply the Best” to sensor technology. The wide
body sensors (26 mm diameter) hold four separate measuring
elements in one unbreakable and chemical resistant PPS
40GF (RytonTM) body. Installation is simple with the integrated
industrial 3/4” tapered thread. Temperature fluctuations are
compensated to extend the sensor life. The FU20 is targeted
at those applications where simplicity will result in accurate and
reliable pH- or redox measurements. This means that in 90% of
the known applications this sensor will be an excellent choice.
In general purpose applications running at constant pressure
and temperature the FU20 sensor has proven it use for years.
In the standard configuration the wide body sensors hold four
separate measuring elements in one unbreakable body made
of PPS40GF (Ryton TM). For the majority of applications this
offers a cost effective and rigid solution to the end users. In
strong acidic applications and in In cases where the chemical
compatibility of Ryton does not address the process needs, the
FTD version made in a PVDF body offers the required solution.
The additional chemical compatibility offered by the PVDF version
addresses the needs in several applications

For more difficult applications: FU24(F)

The FU24 is also made with a chemical resistant PPS 40GF
body. It is particularly useful in harsh applications with fluctuating
pressure and/or temperature. These processes can be “killing”
for a sensor. Process fluid may be moving in and out of the Both FU20 and FU24 are available with VP connector. This
sensor under influence of frequent pressure and/or temperature makes installation a lot easier. All sensors are delivered with a
fluctuations. This results in fast desalting and dilution of the Quality Certificate.
reference electrolyte. This on its turn will change the reference
voltage and cause a drifting pH measurement. In addition to our analogue sensors Yokogawa delivers a platform
consisting of so called SMART sensors and converter named
By using the successful Yokogawa patented Bellow SENCOM. In the SENCOM platform digital functionality allows:
system integrated in the FU24 electrode, a strong pressure • Perform off-line calibration reducing process impact.
compensation mechanism is created. The build-in bellow • Enable easier asset management
ensures immediate interior pressure equalization to the outside • Enable easier statistical process control
pressure, making the sensor virtually insensitive to external • Easier monitoring of extreme conditions during use.
pressure variations.
For additional information about SENCOM and its benefits
A slight overpressure caused by the bellow tension, prevents fluid request you to check the applicable GS-document number
ingress and maintains a positive ion flow out of the sensor. This 12B06J03-04E-E. This document is available from our website
feature is of particular interest in pure water applications. and through our regional offices.

GS 12B06J03-E-E
15th Edition

GS12B06J03-E-E_ed15.indd 1 18/08/16 16:39

 2

General Specifications FU20(F) General specifications FU24(F)

Measuring elements : pH glass electrode Measuring elements : pH glass electrode

: Silver Chloride reference : Silver/Silver Chloride reference
: Solid Platinum electrode : Solid Platinum electrode
: Pt1000 temperature sensor : Pt1000 temperature sensor

Construction materials Construction materials

Wetted parts Wetted materials:
Sensor body : NPT,
 FSM: PPS GF40: FTD : Body :P PS 40GF
PVDF- (GF25+TZ24) (glass filled Ryton)
Earthing pin : Solid Platinum Measuring Sensor : G-Glass
Measuring sensor : G-glass Earth Pin : Solid platinum
LE glass tube : AR-glass Reference Junction : Porous PTFE
O-ring : Viton O-ring : Viton
Reference junction : Porous PTFE
Functional specifications
Functional specifications (at 25°C) Isothermal point : pH 7
Isothermal point : pH 7 Glass impedance
Reference system : Ag/AgCl with saturated KCI - Dome shape : nominal 200 MΩ
Glass impedance - Flat Surface : nominal 700 MΩ
- Dome shape : nominal 200MΩ Reference system : Double junction,
- Flat Surface : nominal 700MΩ Ag/AgCl with saturated KCI,
Junction resistance : 1 to 15 kΩ including Ag+ ion trap
Temperature element : Pt1000 to IEC 751 Junction resistance : 1 to 15 kΩ
Asymmetry potential : 8 ± 15 mV Temperature element : Pt1000 to IEC 751
Slope : > 96 % (of theoretical value) Asymmetry potential : 8 ±15 mV
Slope : > 96 % (of theoretical value)
Dynamic specifications (at 25°C)
Response time pH step (7 to 4) Note: T
 he temperature sensor included in the FU24 is intended
: < 15 sec for 90% to provide indication and cell compensation. The
Response time temp step (10°C) construction has not been tested to the pressure vessel
- Dome shape : < 1 min for 90% standards required for plant temperature control.
- Flat Surface : < 4 min for 90%
Stabilization time (0.02 pH unit/10 s) Dynamic specifications
: < 2 minutes Response time pH step (7 to 4)
: < 15 sec for 90%
Operating range Response time temp step (10°C)
pH : 0 to 14 - Dome shape : < 1 min for 90%
ORP : -1500 to 1500 mV - Flat Surface : < 4 min for 90%
rH : 0 to 100 Stabilization time (0.02 pH unit/10 s)
Temperature : < 2 minutes
- Dome shape : -10°C to 105°C (14°F to 105°F)
- Flat surface : 15°C to 105°C (59°F to 105°F) Operating range
Pressure : 0 to 10 bar (0 to 142 PSIG) pH : 0 to 14
Temperature NPT : -10 - 105 °C (14 - 212 °F)
FSM : 15 - 105 °C (59 - 212 °F)
p(bar) 10 NPT
Pressure : 0 to 10 bar (0 to 145 PSIG)
5 FSM
p(bar) 10 NPT
0
5 FSM
-10 0 25 50 105 Temp. (ºC)
0
Conductivity : > 50 µS/cm
-10 0 25 50 105 Temp. (ºC)
Note: T
 he pH operating range at room temperature is 0-14pH,
but at high temperatures the lifetime will be seriously Storage temp. : -15 to 50 °C (5 to 122 °F)
shortened outside 2-12 pH range.
Note: The FU24 is suitable for pure water applications.
Note: F
 or detailed information about SENCOM sensors refer to
current edition of GS12B03J04. Note: S
 pecifications should not be considered in isolation.
For example the pH range can be 2-12pH, where the
measurement is at elevated temperatures. For advice
about specific applications please contact your local sales
office.

Note: F
 or detailed information about SENCOM sensors refer to
current edition of GS12B03J04.
GS 12B06J03-E-E

GS12B06J03-E-E_ed15.indd 2 18/08/16 16:39

 3

General Specifications PH20 Functional specifications (at 25°C)

(to be discontinued) Isothermal point : pH 7
Reference system : Ag/AgCl with saturated KCl
Measuring elements :p  H glass electrode and Silver Glass impedance : 200 MΩ (nominal), G-glass
/Silver chloride reference system. Junction resistance : 1 to10 kΩ
: Platinum electrode and Pt1000 Temperature element : Pt1000 to IEC 751
temperature sensor. Asymmetry potential : 8 ± 15 mV
Slope : > 96 % (of theoretical value)
Construction materials
Body : PVDF Dynamic specifications (at 25°C)
Earthing pin : Solid platinum/glass Response time pH step (7 to 4)
O-ring : Viton : < 15 sec for 90%
Reference junction : Porous PTFE Response time temp. step (10°C)
Cable : Coaxial with 4 extra leads : < 1 min for 90 %
Sheet material : Thermoplastic rubber Stabilisation time (0.02 pH/10 s)
Measuring Sensor : G-Glass : < 2 minute

Operating range Operating range

pH : 0 to 14 pH : 0 - 14*
ORP : -1500 to 1500 mV Temperature : -10 to 105ºC (14 to 212 °F)
rH : 0 to 100 Pressure : 0 to 10 bar ( 0 to 142 PSIG)
Temperature Conductivity : > 50 µS/cm
- Dome shape : -10°C to 105°C (14°F to 105°F) Storage temperature : -10 to 50ºC (-22 to 122 °F)

p(bar) 10 NPT Pressure Effects on sensor mV

-180 15
5 FSM
-200 Pressure Conventional Sensor

pressure (bar)
potential (m V)

-220 10

-10 0 25 50 105 Temp. (ºC) -240

-260 5
- Flat surface : 15°C to 105°C (59°F to 105°F)
-280 Tempress
Conductivity : > 50 µS/cm
-300 0
time (min)>
Note: T
 he pH operating range at room temperature is 0-14pH, 200 250 300

but at high temperatures the lifetime will be seriously The erratic trend of the standard sensor shows the progressive
shortened outside 2-12 pH range. contamination of its reference junction. The graph indicates
between 0.1 to 0.4 pH error with the conventional sensor while
the readings from the PH20 are extremely stable.

Tablenaam

FU20-03 FU20-VP FU24-05 FU24-VP PH20

FU20-05 FU24-10
FU20-10
FU20-20
Integrated WU10-V-S-02 Integrated WU10-V-S-02 Integrated
WU10-V-S-05 WU10-V-S-05
WU10-V-S-10 WU10-V-S-10
WU10-V-S-15 WU10-V-S-15
WU10-V-S-20 WU10-V-S-20
Flow : FF40+option/FPS or K1523DD Flow FF20 + K1521JA Flow : FF20-*22
Immersion : FD40+option/FPS or K1523DD Sub assembly FS20 + K1521JA Immersion : FD40+option/SF4 or K1547QF
Sub-assembly : FS40+option/FPS or K1523DD Subassembly : FS20-*22
Option HCNF or K1547PJ Option /HCN2 or K1547PA when using FF20 or FS20
Option /HCNF or K1547PJ when no fitting is used
1”NPT SS /NSS or K1547PK 3/4”NPT SS /SN3 or K1547QA
1”NPT Ti /NTI or K1547PM 3/4”R SS /SR3 or K1547QB
1”BSP SS /BSS or K1547PL 1”NPT PVDF / FN4 or K1547PC
1”BSP Ti /BTI or K1547PN 1”R PVDF / FR4 or K547PD

GS 12B06J03-E-E

GS12B06J03-E-E_ed15.indd 3 18/08/16 16:40

 4

Dimensions FU24
254.2
193.0
71.0
33.3

28.0

1”NPT 1”NPT

239.6
178.4
56.4
33.3

28.0

1”NPT 1”NPT

231.5
193.0
71.0
33.3

28.0

1”NPT 1”NPT

3/4” Tapered 3/4” Tapered TYPE: NPT

Dimensions FU20 (Temp) Red F thread thread
63
(Temp) Blue E
ø22.0
ø21

(pH shield) Yellow C ø6.5

ø26
FU20-VP-

(pH) Clear A
MODEL CODE
Serie nummer
ø20.5

(Ref.) Brown B 19.6 19.6 150

22.5 187
(ORP/LE)58.8
Black D 150.0
FU20-NPT with VP connector 215.5
225

PH20 Ø 22 (0.86") 3/4” Tapered ISO 228/1-G3/4 3/4” Tapered

ISO 228/1-G3/4 TYPE: FSM
thread thread
ø22.0
ø21

ø26

19.6 19.6
10.0
58.8 90 (3.54") 137.5
203.0
170 (6.70")

190.4 (7.50")

220.5 (8.68")

GS 12B06J03-E-E Unit: mm

GS12B06J03-E-E_ed15.indd 4 18/08/16 16:40

 5

Dimensions
Dimensions FU20 FU20 Adapter
ø 35.5 (1.4")

3/4” TAPERED THREAD 3/4” TAPERED THREAD

Ø 26.0 (1.02”)
Ø 22.0 (0.86)
PG7

99.0 (3.9")
-NPT
19.7 (0.78”)
19.7(0.78”)
22.5 (0.89”)

25.0 (1")
Ø 22.0 (0.86)
(/NSS /NTI)
PG7

1" NPT or
-FSM ISO 7/1-R1
10.0 (0.39”) (/BSS /BTI)
ø 39.0 (1.54")
FU20-VP-

-VP
ø 35.5 (1.4")
1” NPT or ISO 7/1-R1
PG7

99.0 (3.9")

51.0 (2.3”)
25.0 (1")

150.0 (5.9”)
/NSS, /NTI, /BSS, /BTI (/NSS /NTI)
1" NPT or
ISO 7/1-R1
(/BSS /BTI)
ø 39.0 (1.54")

Installation example for FU20 in PR10 retractable fitting

Unit: mm (inches) GS 12B06J03-E-E

GS12B06J03-E-E_ed15.indd 5 18/08/16 16:40

 6

Installation examples using the FU20 adapter range

FD40 also for FF40 and FS40 FF40 example

Nut

O-ring

Adapter
( /FPS or K1523DD)

Fitting

FU20

O-ring

Adapter
( /FPS or K1523DD)

FU20

O-ring

GS 12B06J03-E-E

GS12B06J03-E-E_ed15.indd 6 18/08/16 16:40

 7

FS20 installation example for FU24

Ø 30.0 (1.18”)

22 mm
35.0 (1.38”)

5.0 (0.2”)

10.0 (0.4”)
Ø 30.0 (1.18”)

Ø 36.0 (1.42”)

K1521JA

O-ring
Dimensions Ryton adapter for FF40, FS40 and
FD40 fittings (/FPS or K1523DD) FS20-S32-WE
Note: old part K1523DC is not compatible with VP connector
and sensors manufactered after December 2009.

FU20 + adapter

K1521JA

FS20-S33*B

GS 12B06J03-E-E

GS12B06J03-E-E_ed15.indd 7 18/08/16 16:40

 8

Installation examples using the PH20 adapter range

Ø 36.0 (1.42")

Ø 30.0 (1.18")
Sensor
cable

45 (1.77")
Plug-in
sensor

25.2 (1.0")
/SF4 adapter
ISO 228/1-G3/4"

1" NPT
/FN4 (1” NPT) and /FR4 (1” ISO 7/1-R1)

Ø 36.0 (1.42")
Ø 30.0 (1.18")
ISO 228/1-G3/4"

FS40-S22-WE

45 (1.77")
25.2 (1.0")
20.0 (0.8")
3/4" NPT

/SN3 (3/4” NPT) and /SR3 (3/4” ISO 7/1-R)

adapter options PH20 /

FS40-S22-TP 3: 3/4”
4: 1”
Front- and backend mounting in the FF40 N: NPT
R: ISO 7/1-R1
Using the /SF4 adapter, the PH20 can be mounted in the F: PVDF
standard range of conductivity flow fitting (FF40..), the immersion S: Stainless steel
fittings (FD40-..) and sub-assemblies (FS40..). The adapter can
be mounted on the front thread, or the back thread dependent
on the required insertion depth.

Unit: mm (inches)

Ø 36.0 (1.42")
30 (1.18")
15 (0.6")

O-rings
(2x)
ISO 228/1-G3/4"

Ø 30 (1.18")

/SF4. Adapter for FF40, FS40 and FD40 fittings

15º Minimum
38.0(1.50")

38.0(1.50")
24.5(0.96")

24.5(0.96")
15.0 (0.6")

15.0 (0.6")

ISO 228/1-G3/4"

Direct mounting with an adapter ø31.0(1.22")

/FN4, /FR4, /SN3, /SR3 ISO 228/1-G3/4"

ø31.0(1.22")

/PH8 Adapter for PH8 Combi Sensor fittings (only)

GS 12B06J03-E-E

GS12B06J03-E-E_ed15.indd 8 18/08/16 16:40

 9

Model and Suffix codes

Model code Suffix code Option code Description

}
FU20 Wide Body sensor
Cable length -03 3 m cable
-05 5 m cable not available for FTD and FTS
-10 10 m cable
-20 20 m cable
-VP No Cable; Vario Pin connector
Temp. Sensor -T1 Pt1000
Model -NPT PPS body / Tapered Thread / Dome shaped
-FSM PPS body / Tapered Thread / Flat Surface
-FTD PVDF body / Tapered Thread / Dome shaped
-FTS PVDF body / Tapered Thread / Salt Sensitive membrane (See GS12B06J03-05E-E)
Options /HCNF Complete Hastelloy cleaning system
/FPS Adapter F*40 from PPO
/NSS 1” NPT, SS316
/NTI 1” NPT, Titanium
/BSS 1” BSP, SS316
/BTI 1” BSP, Titanium
* Only internal in Model code

Model code Suffix code Option code Description

FU24 Combined pH sensor
Sensor -05 5m fixed cable
connection -10 10m fixed cable
-VP Variopin connector
Temperature sensor -T1 Pt1000
Sensor tip -FSM Self cleaning, flat surface
-NPT Heavy duty, dome shaped

Model code Suffix code Option code Description

PH20 4-in-1 pH sensor
Material -F PVDF
Membrane -G Dome shaped
Cable length -02 2 meter
-05 5 meter
-10 10 meter
-20 20 meter
-30 30 meter
Temp. element -T1 Pt1000
-N -A Always -N -A
Options /SN3 Stainless steel 3/4” NPT adapter (316L)
/SR3 Stainless steel 3/4” R adapter (316L)
/FN4 PVDF 1” NPT adapter
/FR4 PVDF 1” R adapter
/PH8 Adapter for PH8 combi sensor fittings (only)
/SF4 Stainless steel adapter for FF40, FS40 and FD40 fitings
/HCNF Hastelloy ­cleaning system

Model code Suffix Code Option code Description

WU10 Sensor cable
Connector type -V Variopin
Cable type -S Single Coax
Cable length -02 2 meters
-05 5 meters
-10 10 meters
-15 15 meters
-20 20 meters

GS 12B06J03-E-E

GS12B06J03-E-E_ed15.indd 9 18/08/16 16:40

 10

Spare parts PH20, FU20, FU24 & cleaning system Spare Parts

Part no. Description Prod. No. Description

K1500EK O-rings Viton 6.07x1.78 (5x2) K1520BA Starters Kit: (3x 500 ml)
K1500ER O-ring set Viton FF20-S22 Buffer Solutions pH 4.01 / 6.87 / 9.18
K1500FR O-rings Viton 29.82x2.62 (5) K1520BB Buffer Solution (500 ml) pH 1.68
K1500FS O-rings EPDM 29.82x2.62 (5) K1520BC Buffer Solution (500 ml) pH 4.01
K1500FT O-rings Silicone, 29.82x2.62 (5) K1520BD Buffer Solution (500 ml) pH 6.87
K1511DP O-rings Viton 21.9x2.62 (5x2) K1520BE Buffer Solution (500 ml) pH 9.18
K1511DQ O-rings EPDM 21.9x2.62 (5x2)
K1520FA Ferrule set PEEK/PTFE Connection equipment
K1520ZD Mounting nut for PH20 BA10 Junction box for pH extension cables
K1521JA SS holder FU24 1”NPT FF20 + FS20 WF10-xxx-F pH signal cable with terminated ends. Specify
K1521JB Holder for FU24(F) in FF20-F3* (PVDF) length in whole meters
K1521JD Holder for FU20(F) in FF20-S3* (SS) WU10-V-S-XX Variopin cable
K1521JE Holder for FU20(F) in FF20-F3* (PVDF)
K1521JF Holder for FU20(F) in FF20-P3* (PP)
K1523DD /FPS, FU20-mounting in F*40 Cleaning system for FU20 & PH20
K1547PC /FN4 for PH20
K1547PD /FR4 for PH20 Some applications require frequent cleaning of the electrode.
K1547PE /PH8 for PH20 For these applications Yokogawa designed a chemical cleaning
K1547PF Nozzle and mounting HCN2/3/F system that can either be used in the Yokogawa fitting range
K1547PG Nozzle and mounting HCN4 (HCN2, HCN3 or HCN4) or as back-end mounting option for
K1547PH 10 m PVDF Tube and mounting the PH20 and FU20. The /HCNF option comes with a hastelloy
K1547PJ Hastelloy cleaning unit HCNF cleaning nozzle, Stainless steel mounting and ferrules sets and a
K1547PK Adapter 1” NPT, SS 316 for FU20 nylon tube of 10 meters.
K1547PL Adapter 1” BSP, SS 316 for FU20
K1547PM Adapter 1” NPT, Ti for FU20
K1547PN Adapter 1” BSP, Ti for FU20
K1547PP Spare Part EPDM spraying valves
K1547QA /SN3 for PH20
K1547QB /SR3 for PH20
K1547QF /SR3 for PH20

K1547PH

K1547PF

Option /HCNF

GS 12B06J03-E-E

GS12B06J03-E-E_ed15.indd 10 18/08/16 16:40

 11

Wiring of the PH20 / FU20 / FU24

pH (& ORP) WIRING DIAGRAM

11
(11) T2 TEMPERATURE
12
Conventional pH (& ORP) wiring (12) T1 TEMPERATURE
Connect the cable versions PH20, FU20 or FU24 to the EXA 13
(13) RE REFERENCE
or EXAxt PH analyzer as shown. With this configuration, it is
(17) REFERENCE SCREEN
possible to measure ORP (or rH) at the same time (Refer to
the EXA or EXAxt manual for appropriate impedance jumper 14 (14) SE SOLUTION GROUND
and Service Code settings). 15
(15) GE GLASS (Measure)
16 (16) S GLASS SCREEN

ORP WIRING DIAGRAM with normal reference

11
(11) T2 TEMPERATURE
12
(12) T1 TEMPERATURE
13
Wiring for ORP measurement with normal reference (13) RE REFERENCE
Connect the PH20, FU20 or FU24 to the EXA PH analyzer as
(17) REFERENCE SCREEN
shown. Refer to the EXA manual for appropriate impedance
jumper and Service Code settings. (14) SE SOLUTION GROUND
14
(15) GE Pt (ORP Measure)

(16) S GLASS SCREEN

16 15
(Not used)

ORP WIRING DIAGRAM with pH sensor as reference

11
(11) T2 TEMPERATURE
12
(12) T1 TEMPERATURE
Wiring for ORP measurement with pH reference 15
(13) RE REFERENCE (pH)
Connect the PH20, FU20 or FU24 to the EXA Glass PH
analyzer as shown. Refer to the EXA manual for appropriate 16
(17) REFERENCE SCREEN
impedance jumper and Service Code settings.
(14) SE (SOLUTION GROUND)

(15) GE Pt (ORP Measure)

14
(16) S GLASS SCREEN
13
(Not used)

Pin lay-out for Variopin sensors

pH sensor Differential pH sensor

H
A (pH) (Not used)
B (Ref.) F (Temp) A (pH) G (ORP liquid Earth)

B F (Temp)
C E (Temp) (Shield pH)
C (pNa) E (Temp)
D
(ORP liquid Earth) D
Shield (Shield pNa)

GS 12B06J03-E-E

GS12B06J03-E-E_ed15.indd 11 18/08/16 16:40

 YOKOGAWA ELECTRIC CORPORATION YOKOGAWA ELECTRIC ASIA Pte. LTD.
5 Bedok South Road
Yokogawa has an extensive sales and
World Headquarters
9-32, Nakacho 2-chome, Musashino-shi Singapore 469270 distribution network.
Tokyo 180-8750 Singapore
Japan www.yokogawa.com/sg Please refer to the European website
www.yokogawa.com
(www.yokogawa.com/eu) to contact your
YOKOGAWA CORPORATION OF AMERICA YOKOGAWA CHINA CO. LTD. nearest representative.
2 Dart Road 3F Tower D Cartelo Crocodile Building
Newnan GA 30265 No.568 West Tianshan Road Changing District
USA Shanghai, China
www.yokogawa.com/us www.yokogawa.com/cn

YOKOGAWA MIDDLE EAST B.S.C.(c)

Euroweg 2 P.O. Box 10070, Manama
3825 HD Amersfoort Building 577, Road 2516, Busaiteen 225
The Netherlands Muharraq, Bahrain
www.yokogawa.com/eu www.yokogawa.com/bh

GS
GS 12B06J03-E-E
12X0X0-E-E
Subject to change without notice Printed in The Netherlands, 00-000 (A) I
Subject to change without notice Printed in The Netherlands, 15-1608 (A) I
Copyright ©
Copyright©

GS12B06J03-E-E_ed15.indd 12 18/08/16 16:40