1N4614-1 – 1N4627-1e3,

1N4099-1 – 1N4135-1e3

Qualified Levels:
500 mW Metallurgically Bonded JAN, JANTX,
Available on
commercial Glass Zener Diodes JANTXV and JANS
versions
Qualified per MIL-PRF-19500/435
DESCRIPTION
The 1N4099-1 through 1N4135-1 and 1N4614-1 through 1N4627-1 series are 500 mW, Zener
voltage regulators in the axial-leaded, glass DO-35 package. Voltages from 1.8 to 100V in
5%, 2%, and 1% tolerances are available. They are constructed with an internal metallurgical
bond and are mil-qualified up to the JANS level for high reliability applications.

Important: For the latest information, visit our website http://www.microsemi.com.

FEATURES DO-35 (DO-204AH)
• JEDEC registered 1N4099 through 1N4135 and 1N4614 through 1N4627 series.
Package
• Internal metallurgical bond.
• Max noise density 40 μV / √Hz for 6.8 V and up. Falls quickly to 1 μV / √Hz at lower voltages. Also available in:
• JAN, JANTX, JANTXV and JANS qualifications are available per MIL-PRF-19500/435.
DO-213AA package
• RoHS compliant versions available (commercial grade only). (surface mount)
1N4099UR-1 – 1N4135UR-1
and
1N4614UR-1 – 1N4627UR-1
APPLICATIONS / BENEFITS
DO-216 package
• Flexible axial-lead mounting terminals. (tabbed surface mount)
• Regulates voltage over broad ranges of current and temperature. 1PMT4099 – 1PMT4135 and
1PMT4614 – 1PMT4627
• Extensive selection from 1.8 to 100 volts.
• Voltage tolerances of 5% (standard), 2% and 1% are available.
• Hermetically sealed surface mount package.
• Non-sensitive to ESD per MIL-STD-750 method 1020.
• Minimal capacitance (see Figure 3).
• Inherently radiation hard as described in Microsemi MicroNote 050.

MAXIMUM RATINGS @ T C = +25 ºC unless otherwise specified

Parameters/Test Conditions Symbol Value Unit

o MSC – Lawrence
Junction and Storage Temperature T J and T STG -65 to +175 C
(1) o 6 Lake Street,
Thermal Resistance Junction-to-Ambient R ӨJA 300 C/W Lawrence, MA 01841
o
Thermal Resistance Junction-to-Lead @ 3/8 (10 mm) R ӨJL 250 C/W Tel: 1-800-446-1158 or
lead length from body (978) 620-2600
(2) Fax: (978) 689-0803
Rated Average Power Dissipation P M(AV) 0.5 W
Forward Voltage @ 200 mA VF 1.1 V
o MSC – Ireland
Solder Temperature @ 10 s 260 C Gort Road Business Park,
Ennis, Co. Clare, Ireland
Notes: 1. When mounted on FR4 PC board (1 oz Cu) with 4 mm2 copper pads and track width 1 mm, length 25
Tel: +353 (0) 65 6840044
mm.
Fax: +353 (0) 65 6822298
2. The 0.5 W should be linearly derated starting at T L = 50 °C and goes to zero at 175 °C. For ambient T A
condition on a typical PC board, it linearly derates from 500 mW starting at 25 °C and goes to zero at
Website:
175 °C (see Figure 2).
www.microsemi.com

T4-LDS-0245-2, Rev. 1 (5/31/13) ©2013 Microsemi Corporation Page 1 of 5

 1N4614-1 – 1N4627-1e3,
1N4099-1 – 1N4135-1e3

MECHANICAL and PACKAGING

• CASE: Hermetically sealed axial-lead glass DO-35 (DO-204AH) style package.
• TERMINALS: Tin-lead or RoHS compliant annealed matte-tin (on commercial grade only) plating. Solderable per MIL-STD-750,
method 2026.
• POLARITY: Cathode indicated by band. The diode is to be operated with the banded end positive with respect to the opposite
end for Zener regulation.
• MARKING: Part number.
• TAPE & REEL option: Standard per EIA-296 (add “TR” suffix to part number). Consult factory for quantities.
• WEIGHT: Approximately 0.2 grams.
• See Package Dimensions on last page.

PART NOMENCLATURE

JAN 1N4099 C -1 e3

Reliability Level RoHS Compliance

JAN = JAN level e3 = RoHS compliant (available
JANTX = JANTX level on commercial grade only)
JANTXV = JANTXV level Blank = non-RoHS compliant
JANS = JANS level
Blank = Commercial Metallurgically Bonded

JEDEC type number

(See Electrical Characteristics
table)

Zener Voltage Tolerance

Blank = 5%
C = 2%
D = 1%

SYMBOLS & DEFINITIONS

Symbol Definition
Temperature Coefficient of Regulator Voltage: The change in regulator voltage divided by the change in temperature
α VZ
that caused it expressed in %/C or mV/°C.
IR Reverse Current: The maximum reverse (leakage) current that will flow at the specified voltage and temperature.
I Z , I ZT , I ZK Regulator Current: The dc regulator current (I Z ), at a specified test point (I ZT ), near breakdown knee (I ZK ).
I ZM Maximum Regulator (Zener) Current: The maximum rated dc current for the specified power rating.
ND Noise Density: The noise generated over a specified frequency bandwidth usually specified in terms of mV/ √Hz.
VR Reverse Voltage: The reverse voltage dc value, no alternating component.
VZ Zener Voltage: The Zener voltage the device will exhibit at a specified current (I Z ) in its breakdown region.
Dynamic Impedance: The small signal impedance of the diode when biased to operate in its breakdown region at a
Z ZT or Z ZK
specified rms current modulation (typically 10% of I ZT or I ZK ) and superimposed on I ZT or I ZK respectively.

T4-LDS-0245-2, Rev. 1 (5/31/13) ©2013 Microsemi Corporation Page 2 of 5

 1N4614-1 – 1N4627-1e3,
1N4099-1 – 1N4135-1e3

ELECTRICAL CHARACTERISTICS @ 25 °C unless otherwise stated

NOMINAL ZENER MAXIMUM MAXIMUM MAXIMUM MAXIMUM MAXIMUM

INDUSTRY ZENER TEST ZENER REVERSE NOISE ZENER TEMP. COEFF.
PART VOLTAGE CURRENT IMPEDANCE CURRENT DENSITY CURRENT OF ZENER
NUMBER* V Z @ I ZT I ZT Z ZT IR @ VR N D @ I ZT I ZM VOLTAGE
(Note 1) (Note 2) (Note 3) α VZ
Volts µA Ohms µA Volts µV/√Hz mA %/oC
1N4614-1 1.8 250 1200 3.5 1.0 1 120.0 -0.075
1N4615-1 2.0 250 1250 2.5 1.0 1 110.0 -0.075
1N4616-1 2.2 250 1300 2.0 1.0 1 100.0 -0.075
1N4617-1 2.4 250 1400 1.0 1.0 1 95.0 -0.075
1N4618-1 2.7 250 1500 0.5 1.0 1 90.0 -0.075
1N4619-1 3.0 250 1600 0.4 1.0 1 87.0 -0.075
1N4620-1 3.3 250 1650 3.5 1.5 1 85.0 -0.075
1N4621-1 3.6 250 1700 3.5 2.0 1 83.0 -0.065
1N4622-1 3.9 250 1650 2.5 2.0 1 80.0 -0.060
1N4623-1 4.3 250 1600 2.0 2.0 1 77.0 -0.050
1N4624-1 4.7 250 1550 5.0 3.0 1 75.0 -0.050,+0.020
1N4625-1 5.1 250 1500 5.0 3.0 2 70.0 -0.045,+0.030
1N4626-1 5.6 250 1400 5.0 4.0 4 65.0 -0.020,+0.040
1N4627-1 6.2 250 1200 5.0 5.0 5 61.0 -0.010,+0.050
1N4099-1 6.8 250 200 1.0 5.2 40 56.0 +0.060
1N4100-1 7.5 250 200 1.0 5.7 40 51.0 +0.065
1N4101-1 8.2 250 200 0.5 6.3 40 46.0 +0.070
1N4102-1 8.7 250 200 0.5 6.7 40 44.0 +0.075
1N4103-1 9.1 250 200 0.5 7.0 40 42.0 +0.080
1N4104-1 10.0 250 200 0.5 7.6 40 38.0 +0.080
1N4105-1 11.0 250 200 0.05 8.5 40 35.0 +0.080
1N4106-1 12.0 250 200 0.05 9.2 40 32.0 +0.080
1N4107-1 13.0 250 200 0.05 9.9 40 29.0 +0.080
1N4108-1 14.0 250 200 0.05 10.7 40 27.0 +0.085
1N4109-1 15.0 250 100 0.05 11.4 40 25.0 +0.085
1N4110-1 16.0 250 100 0.05 12.2 40 24.0 +0.085
1N4111-1 17.0 250 100 0.05 13.0 40 22.0 +0.090
1N4112-1 18.0 250 100 0.05 13.7 40 21.0 +0.090
1N4113-1 19.0 250 150 0.05 14.5 40 20.0 +0.090
1N4114-1 20.0 250 150 0.01 15.2 40 19.0 +0.090
1N4115-1 22.0 250 150 0.01 16.8 40 17.0 +0.090
1N4116-1 24.0 250 150 0.01 18.3 40 16.0 +0.090
1N4117-1 25.0 250 150 0.01 19.0 40 15.0 +0.090
1N4118-1 27.0 250 150 0.01 20.5 40 14.0 +0.090
1N4119-1 28.0 250 200 0.01 21.3 40 14.0 +0.095
1N4120-1 30.0 250 200 0.01 22.8 40 13.0 +0.095
1N4121-1 33.0 250 200 0.01 25.1 40 12.0 +0.095
1N4122-1 36.0 250 200 0.01 27.4 40 11.0 +0.095
1N4123-1 39.0 250 200 0.01 29.7 40 9.8 +0.095
1N4124-1 43.0 250 250 0.01 32.7 40 8.9 +0.095
1N4125-1 47.0 250 250 0.01 35.8 40 8.1 +0.095
1N4126-1 51.0 250 300 0.01 38.8 40 7.5 +0.100
1N4127-1 56.0 250 300 0.01 42.6 40 6.7 +0.100
1N4128-1 60.0 250 400 0.01 45.6 40 6.4 +0.100
1N4129-1 62.0 250 500 0.01 47.1 40 6.1 +0.100
1N4130-1 68.0 250 700 0.01 51.7 40 5.6 +0.100
1N4131-1 75.0 250 700 0.01 57.0 40 5.1 +0.100
1N4132-1 82.0 250 800 0.01 62.4 40 4.6 +0.100
1N4133-1 87.0 250 1000 0.01 66.2 40 4.4 +0.100
1N4134-1 91.0 250 1200 0.01 69.2 40 4.2 +0.100
1N4135-1 100.0 250 1600 0.01 76.0 40 3.8 +0.100
*JEDEC Registered Data.

SEE NOTES ON NEXT PAGE.

T4-LDS-0245-2, Rev. 1 (5/31/13) ©2013 Microsemi Corporation Page 3 of 5

 1N4614-1 – 1N4627-1e3,
1N4099-1 – 1N4135-1e3

NOTE 1: The JEDEC type numbers shown in the prior table have a standard tolerance of +/-5% on the nominal Zener voltage. V Z is measured with
the diode in thermal equilibrium (still air) at 25 oC.

NOTE 2: Zener impedance is derived by superimposing on I ZT a 60 Hz rms ac current at 10% of I ZT (25 µA ). See MicroNote 202 for Zener
impedance variation with different operating currents.

NOTE 3: Based upon 400 mW maximum power dissipation at 25 ºC lead temperature, allowance has been made for the higher voltage associated
with operation at higher currents.

GRAPHS

Pd Rated Power Dissipation (mW)

o
Temperature ( C)

FIGURE 2 – Power Derating Curve

FIGURE 1 – Noise Density Measurement Circuit

Noise density, (N D ) is specified in microvolt-rms per square-root-hertz.
Actual measurement is performed using a 1 KHz to 3 KHz frequency
bandpass filter at a constant Zener test current (I ZT ) at 25 oC ambient
temperature. N D is calculated from the formula.
Typical Capacitance in Picofarads (pF)

Zener Voltage V Z

FIGURE 3 – Capacitance vs. Zener Voltage (Typical)

T4-LDS-0245-2, Rev. 1 (5/31/13) ©2013 Microsemi Corporation Page 4 of 5

 1N4614-1 – 1N4627-1e3,
1N4099-1 – 1N4135-1e3

PACKAGE DIMENSIONS

Dimensions
Ltr Inches Millimeters Notes
Min Max Min Max
BD 0.056 0.090 1.42 2.29 3
BL 0.140 0.200 3.56 5.08 3
LD 0.018 0.022 0.46 0.56
LL 1.000 1.500 25.40 38.10
LL 1 - 0.050 - 1.27 4

NOTES:
1. Dimensions are in inches.
2. Millimeters are given for information only.
3. Package contour optional within BD and length BL. Heat slugs, if any, shall be included within this cylinder
but shall not be subject to minimum limit of BD. The BL dimension shall include the entire body including
slugs.
4. Within this zone lead, diameter may vary to allow for lead finishes and irregularities other than heat slugs.
5. In accordance with ASME Y14.5M, diameters are equivalent to Φx symbology.

T4-LDS-0245-2, Rev. 1 (5/31/13) ©2013 Microsemi Corporation Page 5 of 5

Mouser Electronics

Authorized Distributor

Click to View Pricing, Inventory, Delivery & Lifecycle Information:

Microchip:
JANTX1N4618-1 JAN1N4104-1 JAN1N4128-1 JANTX1N4116-1 JANS1N4099-1 JANTX1N4101-1
JANTXV1N4616-1 Jantx1N4114-1 JANTX1N4131-1 CDLL4129 JANTXV1N4622-1 JAN1N4120-1 1N4623-1
JANTX1N4135-1 JANTXV1N4627-1 CDLL4108 JANTX1N4617-1 JANTXV1N4105-1 JANTX1N4099-1 CDLL4116
CDLL4109 JAN1N4626-1 JANTXV1N4100-1 CDLL4120 Jantx1N4105-1 JAN1N4623-1 JANS1N4106-1
Jantx1N4123-1 JANTX1N4616-1 JANTX1N4623-1 CDLL4104 CDLL4103 JANTX1N4624-1 JANTXV1N4106-1
JANTX1N4104-1 JANTX1N4625-1 CDLL4099 CDLL4102 CDLL4100 JAN1N4106-1 JANTX1N4615-1
JANS1N4625-1 JAN1N4619-1 Jantx1N4106-1 1N4099 Jantx1N4103-1 JANTXV1N4625-1 JANTXV1N4621-1
Jantx1N4120-1 JANTX1N4118-1 JAN1N4105-1 CDLL4124 JAN1N4627-1 Jantx1N4112-1 1N4620-1 JAN1N4100-1
JANTX1N4614-1 JAN1N4615-1 JAN1N4099-1 Jantxv1N4120-1 JANTX1N4126-1 1N4619-1 JAN1N4620-1
JAN1N4116-1 JANS1N4623-1 1N4615-1 CDLL4111 1N4624-1 JANTX1N4117-1 1N4627-1 JANTX1N4619-1
JANTXV1N4624-1 JANTXV1N4107-1 1N4617-1 JANTXV1N4620-1 JANTX1N4109-1 1N4618-1 JANS1N4624-1
JANTXV1N4614-1 JAN1N4111-1 CDLL4112 JAN1N4624-1 1N4625-1 Jantx1N4100-1 JAN1N4614-1
JANTXV1N4104-1 JANTX1N4108-1 JANTXV1N4623-1 JAN1N4618-1 JAN1N4135-1 1N4616-1 JANTX1N4620-1
JANTXV1N4617-1 JANS1N4615-1 JAN1N4617-1 1N4614-1 JAN1N4129-1 JANS1N4107-1 JANTXV1N4099-1
CDLL4106