BILASPUR SMART CITY LIMITED

BILL OF QUANTITIES(BOQ)
SOR: Schedule of Rates for Building Works 2015 & It's amendment ,PWD Electrical Works SOR 2015
& PWD Road Works SOR 2015
SN SOR REF ITEM DESCRIPTION QTY UNIT
NO

1 CG PWD 16.290 16.29 Taking out window shutters (steel or wood) including stacking 82.00 each
BUIDLING within 50 metres lead.
SOR 2015
2 CG PWD 9.150 9.15/81 Providing and fixing M.S. grill of approved pattern made of 565.20 Kg
BUIDLING M.S. flats or square or round bars welded to steel frame of windows etc.
SOR 2015 including applying a priming coat welded to frame with all necessary
fiiting complete including applying a priming of red oxide zinc chromate
primer.

3 CG PWD 14.22.2 14.22.2/134 Painting on new work (two or more coats) to give an even 217.44 Sqm
BUIDLING shade with Premium synthetic enamel paint
SOR 2015
4 CG PWD 8.166 8.166 Providing and fixing factory made uPVC white colour sliding 179.12 Sqm
BUIDLING glazed window upto 1.50 m in height dimension comprising of uPVC
SOR 2015 multi-chambered frame with in-built roller track and sash extruded
profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel
section made from roll forming process of required length (shape & size
according to uPVC profile), appropriate dimension of uPVC extruded
glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile,
zinc alloy (white powder coated) touch locks with hook, zinc alloy body
with single nylon rollers (weight bearing capacity to be 40 kg), G.I
fasteners 100 x 8 mm size for fixing frame to finished wall and necessary
stainless steel screws etc. Profile of frame & sash shall be mitred cut and
fusion welded at all corners, including drilling of holes for fixing
hardware's and drainage of water etc. After fixing frame the gap between
frame and adjacent finished wall shall be filled with weather proof
silicon sealent over backer rod of required size and of approved quality,
all complete as per approved drawing & direction of Engineer-in-Charge.
(Single / double glass panes, wire mesh and silicon sealant shall be paid
separately vide chapter no. 9.51, 9.58, 9.59 Respectively) Note: For
uPVC frame and sash extruded profiles minus 5% tolerance in
dimension i.e. in depth & width of profile shall be acceptable.
8.165 D. 1Two track two panels sliding window made of (small series)
frame 52 x 44 mm & sash 32 x 60 mm both having wall thickness of 1.9
± 0.2 mm and single glazing bead of appropriate dimension. (Area of
window upto 1.75 sqm)

Page 1 of 17
SN SOR REF ITEM DESCRIPTION QTY UNIT
NO
5 CG PWD 9.14.1 Providing and fixing aluminium work for doors, windows, ventilators 703.64 Kg
BUIDLING and partitions made out of extruded aluminium standard sections (main
SOR 2015 section with minimum 1.5mm thickness) conforming to IS: 733, IS: 1285
mitred and jointed mechanically including aluminium cleats, neoprene
weather stripping gasket beveled edge beading, screws duly fixed in
wall/ floor with fixing clips or hold fasteners or bolts and nuts as
required aluminium sections shall be anodized transparent or dyed to
approved shade according to IS: 1868, minimum anodic coating shall be
of grade AC-15. (Glazing and panelling to be paid for separately)
(SOR. ITEM NO.-9.47/85)
9.47.1 For fixed portion

6 CG PWD 9.47.2 471.86 Kg

BUIDLING Providing and fixing aluminium work for doors, windows, ventilators
SOR 2015 and partitions made out of extruded aluminium standard sections (main
section with minimum 1.5mm thickness) conforming to IS: 733, IS: 1285
mitred and jointed mechanically including aluminium cleats, neoprene
weather stripping gasket beveled edge beading, screws duly fixed in
wall/ floor with fixing clips or hold fasteners or bolts and nuts as
required aluminium sections shall be anodized transparent or dyed to
approved shade according to IS: 1868, minimum anodic coating shall be
of grade AC-15. (Glazing and panelling to be paid for separately)
(SOR. ITEM NO.-9.47/85)

9.47.2) For shutter of doors, windows & ventilators including providing

and making provision for fixing of fitting wherever required including
the cost of PVC/ neoprene gasket required (Fittings shall be paid for
separately).

7 CG PWD 9.51.4 Providing and fixing glazing in aluminium door, window, ventilator 62.60 Sqm
BUIDLING shutters and partitions etc. with PVC/ neoprene gasket etc. complete.
SOR 2015 (Cost of aluminium snap beading shall be paid in basic item):
(SOR. ITEM NO.-9.51/85)
9.51.4 With float glass panes of 8 mm thickness
8 CG PWD 9.490 9.49 Extra for polyester powder coated (minimum 50 micron) aluminium 703.64 Sqm
BUIDLING sections instead of anodized.
SOR 2015
9 CG PWD 9.500 9.50 Providing and fixing 12mm thick pre-laminated particle board flat 39.58 sqm
BUIDLING pressed with decorative lamination and balancing lamination on specified
SOR 2015 sides exterior Grade – I MDF Board 12 mm thick confirming to
IS:14587, including fixed in aluminium doors, windows shutters and
partition frames with C.P. brass/ stainless steel screws etc. complete.

10 CG PWD 9.550 9.55 Providing and fixing of six/seven levers branded and approved 42 each
BUIDLING mortise
SOR 2015 lock.
11 CG PWD 8.120 8.120 Providing and fixing aluminium sliding door bolts with 16mm rod, 62.00 each
BUIDLING necessary nickel plated iron nuts bolts and screws etc complete.
SOR 2015 8.120.2 250x16mm
12 CG PWD 8.123 8.123 Providing and fixing aluminium door handles 2.5mm thick with 96.00 each
BUIDLING necessary
SOR 2015 nickel plated iron screws etc complete.
8.123.1 150 mm

Page 2 of 17
SN SOR REF ITEM DESCRIPTION QTY UNIT
NO
13 CG PWD 8.121 8.121 Providing and fixing aluminium door latch with 12mm rod, 54.00 each
BUIDLING necessary nickel plated iron nuts bolts and screws etc complete.
SOR 2015 8.121.2 250x12mm
14 CG PWD 8.159 8.159 Providing and fixing IS: 3564 marked aluminium extruded section 42.00 each
BUIDLING body tubular type universal hydraulic door closer with double speed
SOR 2015 adjustment with necessary accessories and screws etc complete.

15 CG PWD 10.610 Providing and fixing at all height false ceiling consisting of frame work 551.49 Sqm
BUIDLING "W"/ "U" / "L" sections made of G.I. sheet with zinc coating of grade
SOR 2015 120 consisting of angle cleats of size 25mm wide x 1.6mm thick with
flanges of 22mm and 37mm at 1200mm centre to centre one flange fixed
to the ceiling with dash fastener 12.5mm diax40mm long with 6mm dia
bolts to the angle hangers of 25x25x0.55mm of required length, and
other end of angle hanger being fixed with nut and bolts to G.I. channels
45x15x0.9mm running at the rate of 1200mm centre to centre to which
the ceiling section 0.5mm thick button wedge of 80mm with tapered
flanges of 26mm each having clips of 10.5mm at 450mm centre to centre
shall be fixed in a direction perpendicular to G.I. channel with
connecting clips made out of 2.64mm diax230mm long G.I. wire at every
junction including fixing the gypsum board with ceiling section and
perimeter channels 0.55mm thick 27mm high having flanges of 20mm
and 30mm long, the perimeter of ceiling fixed to wall/partition with the
help of rawl plugs at 450mm centre to centre with 25mm long drive-
all screws @ 230mm interval including jointing and fixing to a flush
finish of tapered and square edges of the board with recommended filler,
jointing tapes, finisher and two coats of primer suitable for board as
per manufactures specification and also including the cost of making
openings for light fittings, grills, diffusers, cutouts made with frame of
perimeter channels suitably fixed including providing and fixing 12.5
mm thick tapered edge gypsum board conforming to IS: 2095- Part-
I all complete as per drawing and
specification and direction of the Engineer in Charge but excluding the
cost of painting.
(SOR. ITEM NO.-10.61/97)

16 CG PWD 14.130 Providing and applying 2mm thick ready mix exterior grade 513.55 Sqm
BUIDLING approved make putty (like Birla wall care, Alltek Superfine W/R of
SOR 2015 (NCL), Asian, ICI, Nerolac, J.K. wall putty) on walls to make the surface
smooth and even.
(SOR. ITEM NO.-14.13/133)

17 CG PWD 14.120 Applying one coat of cement primer on wall surface (applied @ 339.13 Sqm
BUIDLING 0.80 litrs/10 sqm) complete.
SOR 2015 (SOR. ITEM NO.-14.12/133)
18 CG PWD 14.15.1 Painting exterior surface with ACRYLIC SMOOTH exterior paint of 262.68 Sqm
BUIDLING required shade as per manufacturer's specifications to give protective and
SOR 2015 decorative finish including cleaning washing of surface etc. complete
with:
14.15.1 On new work (Two or more coats applied @ 1.43 ltr/ 10 sqm
over and
(SOR. ITEM NO.-14.16.1/133)

Page 3 of 17
SN SOR REF ITEM DESCRIPTION QTY UNIT
NO
19 CG PWD 12.10.1/112Providing and laying rectified ceramic glazed floor tiles of size 70.92 Sqm
BUIDLING 300x300mm and above conforming to IS : 15622 of approved make,
SOR 2015 colour, shade laid on 20 mm thick Cement Mortar 1:4 (1 cement : 4
coarse sand) including pointing the joints with white cement mixed with
matching pigment etc., complete.
SOR 12.10.1/112
20 CG PWD 12.7.2 12.7 Providing and fixing ceramic glazed wall tiles conforming to IS : 27.72 Sqm
BUIDLING 15622 of approved make, colours, shades and size on wall and dados
SOR 2015 over 12 mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand)
and jointing with grey cement slurry @ 3.3kg per sqm including pointing
in white cement mixed with matching pigment complete.

12.7.2 Size above 200x300mm

21 CG PWD 1.200 Surface dressing of the ground including removing vegetation and 66.50 Sqm
BUIDLING making up undulations and in-equalities not exeeding 15 cms in
SOR 2015 depth/height including disposal of rubbiesh upto 1.5 m lift and lead upto
50 m (at least 5m away from the dressed area).
(SOR ITEM NO.-1.2/9)
22 CG PWD 1.1.1 Excavation for all types and sizes of foundations, trenches and drains or 309.73 Cum
BUIDLING for any other purpose including disposal of excavated stuff upto 1.5 m
SOR 2015 lift and lead upto 50m (at least 5m away from the excavated area),
including dressing and leveling of pits.
(SOR ITEM NO.-1.1.1/9)
1.1.1) In all types of soil
23 CG PWD 1.6.1 Extra for every additional lift of 1.5M or part there of 97.78 Cum
BUIDLING All types of soil
SOR 2015 (SOR ITEM NO.-1.6.1/10)
24 CG PWD 1.180 Providing and filling in plinth with sand / crusher dust and hard moorum 276.53 Cum
BUIDLING under floor in layers not exceeding 20 cm in depth and consolidating
SOR 2015 each deposited layer by ramming and watering, including dressing etc.
complete.
(SOR. ITEM NO.-1.18/11)
25 CG PWD 2.1.1 Providing and fixing formwork including centering, shuttering, strutting, 83.82 Sqm
BUIDLING staging, propping bracing etc. complete and including its removal at all
SOR 2015 levels, for:
(SOR ITEM NO.-2.1.1/16)
Foundations, footings, base of columns and plinth beam in any shape and
size.
26 CG PWD 3.1.3 Providing and laying nominal mix cement concrete with crushed stone 31.72 Cum
BUIDLING aggregate using concrete mixer in foundation, plinth and at ground level
SOR 2015 excluding cost of form work.
(SOR. ITEM NO.- 3.1.3/23)
3.1.3) 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40mm
nominal size).
27 CG PWD 3.4.2 Providing and laying nominal mix reinforcement cement concrete with 46.14 Cum
BUIDLING crushed stone aggregate using concrete mixer in all works upto plinth
SOR 2015 level excluding cost of form work.
(SOR. ITEM NO.- 3.2.1/23)
3.4.2) 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate
20mm nominal size).

Page 4 of 17
SN SOR REF ITEM DESCRIPTION QTY UNIT
NO
28 CG PWD 3.12.1 Providing and placing in position reinforcement for R.C.C. work 3628.80 Kg
BUIDLING including straightening, cutting, bending, binding etc. complete as per
SOR 2015 drawings including cost of binding wire all complete:
(SOR. ITEM NO.-3.12.1/24)
Thermo-Mechanically treated bars
29 CG PWD 7.5.4 Brick work with modular fly-ash lime bricks (FALG Bricks) confirming 48.06 Cum
BUIDLING to IS:12894-2002 of class designation 40 in foundation and plinth in:
SOR 2015 (SOR ITEM NO.- 7.5.4/45)
7.5.4) Cement Mortar 1:6 (1 cement : 6 coarse sand)

30 CG PWD 2.1.5 Columns, Pillars, Piers and likes- rectangular or square in shape 55.44 Sqm
BUIDLING (SOR ITEM NO.- 2.1.5/16)
SOR 2015
31 CG PWD 3.4 Extra for laying PCC/RCC of any grade in superstructure above plinth 17.92 Cum
BUIDLING level for every floor or part thereof in addition to rate for foundation and
SOR 2015 plinth:
(SOR. ITEM NO.-3.4/23)

32 CG PWD 7.6 7.6 Extra for brick work in superstructure above plinth level for every 28.44 Cum
BUIDLING floor or
SOR 2015 part thereof in addition to rate for foundation and plinth:
(SOR ITEM NO.- 7.6/45)

33 CG PWD 3.13 Providing and laying damp proof course (upto 50mm thick) with plain 0.66 Cum
BUIDLING cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded crushed stone
SOR 2015 aggregate 20mm nominal size) including formwork.
(SOR ITEM NO.- 3.13/24)
34 CG PWD 3.15 Applying a coat of hot bitumen VG-10 using @ 1.7kg/ sqm on damp 79.20 Sqm
BUIDLING proof course after cleaning the surface with brushes and finally with a
SOR 2015 piece of cloth lightly soaked in kerosene oil.
(SOR ITEM NO.-3.15/24)
35 CG PWD 2.1.8 Providing and fixing form work including centring, shuttering, strutting, 45.24 Sqm
BUIDLING staging, propping bracing etc. complete and including its removal at all
SOR 2015 levels, for: Beams, lintels, Cantilevers & Walls.
(SOR ITEM NO.- 2.1.8/16)
36 CG PWD 2.1.7 Suspended floors, roofs, access platform, balconies (plain surfaces) and 65.18 Sqm
BUIDLING shelves (cast in situ)
SOR 2015 (SOR ITEM NO.- 2.1.7/16)
37 CG PWD 1.17 Filling from available excavated stuff (excluding rock) in trenches, 92.08 Cum
BUIDLING plinth, sides of foundation etc. in layers not exceeding 20 cm in depth
SOR 2015 consolidating each deposited layer by ramming and watering with a lead
upto 50 m. and lift upto 1.5 M.
(SOR ITEM NO.- 1.17/11)
38 CG PWD 7.11.2 Half brick thick brick masonry with fly-ash lime bricks (FaLG Bricks) 67.70 Sqm
BUIDLING confirming to IS:12894-2002 of class designation 4.0 in superstructure
SOR 2015 above plinth level upto plinth level:
7.11.2 Cement Mortar 1:4 (1 cement : 4 coarse sand)

39 CG PWD 7.12 Extra for half brick work in superstructure above plinth level for every 67.70
BUIDLING storey or part therof in addition to rate for upto plinth:
SOR 2015 ( SOR ITEM NO.- 7.12/46)

Page 5 of 17
SN SOR REF ITEM DESCRIPTION QTY UNIT
NO
40 CG PWD 7.2 Extra for providing and placing in position hopping 25x1.60 mm or 2 67.70
BUIDLING Nos 6mm dia MS bars reinforcement at every third course of half brick
SOR 2015 masonry.
( SOR ITEM NO.- 7.20/46)
41 CG PWD 9.18.3 Providing and fixing in position doors, windows and ventilators frames 112.20 RM
BUIDLING made of cold rolled pressed steel sheet framed profiles made from
SOR 2015 commercial M.S. Sheets conforming to I.S. 513 of 1973 and as per
general specifications of I.S 4351 including hinges jamb, lock jamb, steel
butt hinges, base tie, joints mitred and welded with 10cm long legs of
size 15x3mm M.S. flat, embedded in cement concrete blocks
15x10x10cm size of grade M-10 or rawl plugs and screws or with fixing
clips or with bolts and nuts including neatly compacted filling M-10
cement concrete in profile section applying a priming coat of red oxide
zinc chromate primer.
9.18.3) Single rebate 100mm x 50mm size, 1.25 mm thick sheet
(SOR. ITEM NO.-9.18.3/82)
42 CG PWD 9.18.3 Providing and fixing in position doors, windows and ventilators frames 36.26 Sqm
BUIDLING made of cold rolled pressed steel sheet framed profiles made from
SOR 2015 commercial M.S. Sheets conforming to I.S. 513 of 1973 and as per
general specifications of I.S 4351 including hinges jamb, lock jamb, steel
butt hinges, base tie, joints mitred and welded with 10cm long legs of
size 15x3mm M.S. flat, embedded in cement concrete blocks
15x10x10cm size of grade M-10 or rawl plugs and screws or with fixing
clips or with bolts and nuts including neatly compacted filling M-10
cement concrete in profile section applying a priming coat of red oxide
zinc chromate primer.
9.18.3) Single rebate 100mm x 50mm size, 1.25 mm thick sheet
(SOR. ITEM NO.-9.18.3/82)
43 CG PWD 11.2.4 Providing and making 12mm.thick cement plaster of mix : 200.31 Sqm
BUIDLING (SOR. ITEM NO.-11.2/103)
SOR 2015 11.2.4 ) In Cement Mortar 1:6 ( 1 Cement : 6 fine Sand)
44 CG PWD 11.1.2 Providing and making 6 mm thick cement plaster of mix (SOR. ITEM 50.56 Sqm
BUIDLING NO.-11.1/103)
SOR 2015 11.1.2 ) In Cement mortar 1:4 (1 cement : 4 fine sand)
45 CG PWD 11.3 Providing and making 15mm.thick cement plaster on the rough side of 282.48 Sqm
BUIDLING single or half brickwall of mix.
SOR 2015 11.3.4. ) In Cement Mortar 1:6 (1 cement : 6 fine sand)
(SOR. ITEM NO.-11.3/103)
46 CG PWD 9.21.1 Providing and fixing float glass panes with steel glazing clips and special 10.70 Sqm
BUIDLING metal sash putty of approved make in steel doors, windows, ventilators:
SOR 2015 (SOR. ITEM NO.-9.21.1/82)
9.21.1) 4 mm thick

47 CG PWD 8.12.2 Providing and fixing flush door shutters, interior grade, commercial type, 4.33 Sqm
BUIDLING core of block board construction with frame of first class hard wood and
SOR 2015 well matched commercial ply veneering with vertical grains, cross bands
and face veneers on both faces of shutters excluding hinges.
(SOR. ITEM NO.-8.12/56)
8.12.2) 30 mm. thick (single leaf)

48 CG PWD 8.15 Extra for double leaf shutter instead of single leaf. 4.33 Sqm
BUIDLING (SOR. ITEM NO.-8.15/56)
SOR 2015
Page 6 of 17
SN SOR REF ITEM DESCRIPTION QTY UNIT
NO
49 CG PWD 8.99.1 Providing and fixing M.S. bright finished or black enameled sliding door 2.00 Each
BUIDLING bolts with bolts, nuts and necessary iron screws:
SOR 2015 8.99.1 300x16mm
SOR 8.74.2/63
50 CG PWD 8.99.2 Providing and fixing M.S. bright finished or black enameled sliding door 4.00 Each
BUIDLING bolts with bolts, nuts and necessary iron screws:
SOR 2015 8.99.2)250x16mm
(SOR ITEM NO.8.99/66)
51 CG PWD 8.102.1 Providing and fixing M.S. bright finished or black enameled Tower bolts 2.00 Each
BUIDLING (Barrel type) with necessary iron screws:
SOR 2015 8.102.1)250 mm
(SOR ITEM NO.8.102/66)
52 CG PWD 8.106 Providing and fixing MS bright finished single hanging door stopper 2.00 Each
BUIDLING with
SOR 2015 necessary MS steel screws complete.
(SOR ITEM NO.8.106 /67)
53 CG PWD 8.103.1 Providing and fixing M.S. bright finished or black enameled handles 24.00 Each
BUIDLING with necessary iron screws:
SOR 2015 (SOR. ITEM NO.-8.103/67)
8.103.1)125 mm
54 CG PWD 13.4.3 15mm thick Granite work (machine cut, table rubbed & mirror polished) 109.86 Sqm
BUIDLING for wall lining (veneer work) in cement mortar 1:3 (1 cement : 3 coarse
SOR 2015 sand) including pointing with cement mortar 1:2 (1 white cement: 2
marble dust) mixed with matching pigment. (Area of slab should be over
0.5 sqm).
13.4.3 Granite stone lakha red/ shahi red
(SOR. ITEM NO.- 13.4.2/124)
55 CG PWD 14.9.1 Distempering with acrylic washable distemper to give an even shade. 339.13 Sqm
BUIDLING (SOR. ITEM NO.- 14.9/132)
SOR 2015 14.9.1) On new work (two or more coats)
56 CG PWD 12.37.3 Chequerred precast cement concrete tiles 22mm thick in footpath & 25.86 Sqm
BUIDLING courtyard jointed with neat cement slurry mixed with pigment to match
SOR 2015 the shade of tile including cleaning of joint etc complete on 20 mm thick
bed of cement mortar 1:4 (1 cement :4 coarse sand) : Dark shade using
ordinary cement
12.37.3

57 CG PWD 19.10.4 19.10 Making connection of G.I. distribution branch in G.I. main of 2.00 each
BUIDLING following sizes by providing and fixing tee, including cutting and
SOR 2015 threading the pipe etc. complete: (dia of main line to be measured)
19.10.4 50 mm nominal bore
58 CG PWD 19.7.3 19.7 Providing and fixing on wall surface G.I. pipes medium class 46.32 meter
BUIDLING complete with G.I. fittings and clamps, including cutting, making good
SOR 2015 the walls etc. and testing of joints complete:
(SOR. ITEM NO.-19.7/177)
19.7.3 25 mm dia. nominal bore
59 CG PWD 19.8.3 19.8 Providing and fixing concealed in wall G.I. pipes medium class 63.30 meter
BUIDLING complete
SOR 2015 with G.I. fittings and clamps, including painting with anti corrosive
bitumastic paint, cutting chases, making good the walls etc. and testing
of joints complete:
(SOR. ITEM NO.-19.8/177)
19.8.3 25 mm dia nominal bore

Page 7 of 17
SN SOR REF ITEM DESCRIPTION QTY UNIT
NO
60 CG PWD 19.8.1 19.8 Providing and fixing concealed in wall G.I. pipes medium class 58.00 meter
BUIDLING complete
SOR 2015 with G.I. fittings and clamps, including painting with anti corrosive
bitumastic paint, cutting chases, making good the walls etc. and testing
of joints complete:
(SOR. ITEM NO.-19.8/177)
19.8.1 15 mm dia nominal bore
61 CG PWD 19.17.3 19.17 Providing and fixing ball valve (brass) of approved quality, High 6.00 each
BUIDLING or low pressure, with plastic floats complete :
SOR 2015 19.17.3 25 mm nominal bore
62 CG PWD 19.13.1 19.13 Providing and fixing 15 mm nominal bore Brass bib/stop cock of 20.00 each
BUIDLING approved quality:
SOR 2015 19.13.1 Bib cock (250 grams)
63 CG PWD 19.13.3 19.13 Providing and fixing 15 mm nominal bore Brass bib/stop cock of 20.00 each
BUIDLING approved quality:
SOR 2015 19.13.3 Stop cock (350 grams)
64 CG PWD 19.42 19.42 Providing and placing on terrace (at all floor levels) polyethylene 8000.00 liter
BUIDLING water
SOR 2015 storage tank ISI : 12701 marked with cover and suitable locking
arrangement and making necessary holes for inlet, outlet and overflow
pipes but without fittings and the base support for tank

65 CG PWD 18.76.2 18.76 Providing and fixing on wall face or under floor UV stabilized 194.90 meter
BUIDLING Unplasticised Rigid PVC pipes (single socketed) having 3.2mm wall
SOR 2015 thickness conforming to IS : 13592 (4kg/sqcm) including required
couplers, jointing with seal ring conforming to IS : 5382 leaving 10 mm
gap for thermal expansion etc complete.
18.76.2 110 mm dia pipe.
66 CG PWD 18.77.1 18.77 Providing and fixing on wall face UV stabilized Unplasticised - 30.00 each
BUIDLING PVC moulded fittings/ accessories having 3.2mm wall thickness for
SOR 2015 Rigid PVC pipes conforming to IS : 13592 (heavy) jointing with seal
ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.
18.77.1 Tee/ Tee with door/ Bend 45°/ Bend 90°

67 CG PWD 18.77.3 18.77 Providing and fixing on wall face UV stabilized Unplasticised - 6.00 each
BUIDLING PVC moulded fittings/ accessories having 3.2mm wall thickness for
SOR 2015 Rigid PVC pipes conforming to IS : 13592 (heavy) jointing with seal
ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.
18.77.3 Vent covel

68 CG PWD 18.77.6 18.77 Providing and fixing on wall face UV stabilized Unplasticised - 60.00 each
BUIDLING PVC moulded fittings/ accessories having 3.2mm wall thickness for
SOR 2015 Rigid PVC pipes conforming to IS : 13592 (heavy) jointing with seal
ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.
18.77.6 Nahani trap 110x75mm

69 CG PWD 18.1 18.1 Providing and fixing water closet squatting pan (Indian type W.C. 12.00 each
BUIDLING pan ), 100mm sand cast Iron P or S trap, 10 litre low level P.V.C.
SOR 2015 flushing cistern (same colour) conforming to IS : 7231, with flush bend
and other fittings and fixtures complete including cutting and making
good the walls and floors wherever required :

Page 8 of 17
SN SOR REF ITEM DESCRIPTION QTY UNIT
NO
70 CG PWD 18.4
18.4 Providing and fixing vitreous china water closet (European type 2.00 each
BUIDLING W.C. pan) with white ISI marked plastic seat and lid, 10 litre low level
SOR 2015 white P.V.C. flushing cistern (same colour), conforming to IS : 7231,
with all fittings and fixtures complete including cutting and making good
the walls and floors wherever required :
71 CG PWD 18.17.2 Providing and fixing vitreous china wash basin with C.I. brackets, 32 4.00 each
BUIDLING mm C.P. brass waste of standard pattern, including painting of brackets,
SOR 2015 cutting and making good the walls wherever required :
18.17.2 White Size 550x400 mm
72 CG PWD 18.13 18.13 Providing and fixing white vitreous china urinal basin with waste 12.00 each
BUIDLING fitting
SOR 2015 as per IS : 2556, and other couplings in C.P. brass complete:
73 CG PWD 20.28 20.28 masonry chamber for underground pipe and and bends with well 5.00 each
BUIDLING burnt modular clay bricks crushing strength not less than 35kg/cm2 in
SOR 2015 cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light
duty) 455x610 mm internal dimensions, total weight of cover with frame
to be not less than 38 kg (weight of cover 23 kg and weight of frame 15
kg) R.C.C. top slab with 1:2:4 mix (1 cement :2 coarse sand : 4 graded
stone aggregate 20 mm nominal size) foundation concrete 1:5:10 (1
cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size),
inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3
coarse sand) finished smooth with a floating coat of neat cement on walls
and bed concrete etc. complete as per standard design :

74 CG PWD 20.2.1 20.2 Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse 60.00 meter
BUIDLING sand :
SOR 2015 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes
including bed concrete 150mm thick as per standard design:
20.2.1 100 mm diameter S.W. pipe
75 CG PWD 12.7.1 Providing and fixing ceramic glazed wall tiles conforming to IS : 15622 83.93 Sqm
BUIDLING of approved make, colours, shades and size on wall and dados over 12
SOR 2015 mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and
jointing with grey cement slurry @ 3.3kg per sqm including pointing in
white cement mixed with matching pigment complete.
12.7.1) Size upto 200x300mm
(SOR. ITEM NO.- 12.7.1/111)
76 CG PWD 8.15 Providing and fixing factory made 25mm thick PVC flush door shutters 12.83 Sqm
BUIDLING made out of a one piece Multi chamber extruded PVC section of the size
SOR 2015 of 762mm X 25mm or less as per requirement with an average
wall thickness of 1mm ± 0.3mm. PVC foam end cap of size 23x10mm
are provided on both vertical edges to ensure the overall thickness of
25mm. An M.S. tube having dimensions 19mm x 19mm is inserted
along the hinge side of the door. Core of the door shutter should be filled
with High Density Polyurethane foam. The Top & Bottom edges of the
shutter are covered with an end-cap of the size 25mm X 11mm. Door
shutter shall be reinforced with special polymeric reinforcements as
per manufactures' specification. sqm
(SOR. ITEM NO.-8.150/73)

77 CG PWD 19.15 19.15 Providing and fixing stainless steel drain jali of approved 10.00 each
BUIDLING make/quality
SOR 2015

Page 9 of 17
SN SOR REF ITEM DESCRIPTION QTY UNIT
NO
78 CG PWD 9.57.1 Providing stainless steel railing/ grill made of S.S. flats, hollow S.S. pipe 278.78 Kg
BUIDLING or square/ rectangular sections of approved design fixing in stair case,
SOR 2015 balcony or other places with metal fasteners and stainless steel bolts etc
complete.
9.57.1) SS Grade 204
(SOR. ITEM NO.-9.57.1/86)
79 CG PWD 8.1 Cast in Situ Cement Concrete M 20 kerb (construction of cement 102.46 meter
BUIDLING concrete kerb with channel with top and bottom width 115 and 165 mm
SOR 2015 respectively, 250 mm high in PCC M 20 grade on PCC M 10 grade
foundation 150 mm thick, foundation having 50 mm projection beyond
kerb stone, kerb stone laid with kerb laying machine, (foundation
concrete laid manually, all complete as per clause 409)
(Road SOR. ITEM NO.- 8.1/29)
80 CG PWD 12.65.2 12.65 Providing & laying 60mm thick precast interlocking concrete 139.00 Sqm
BUIDLING blocks of approved size (approx 305 sqcm) and shape/ pattern, over 40
SOR 2015 mm thickaverage complete coarse sand bed with joints of 3mm thick
filled by fine sand including leveling with surface vibrator, temping and
sweeping etc. complete of minimum compressive strength of 250
kg/sq.cm
12.65.2 Pigment Coloured (rubber mould) precast interlock concrete
blocks
81 CG PWD 1.26 Carriage by mechanical transport for 5 km lead:1.26.1 Earth 18.90 Cum
BUIDLING (SOR. ITEM NO.-1.26/12)
SOR 2015
82 CG PWD 9.6.29.6 Steel work welded in built up sections/ framed work including 2061.10 Kg
BUIDLING cutting, hoisting, fixing in position and applying a priming coat of red
SOR 2015 oxide zinc chromate primer.
9.6.2 In gratings, frames, guard bar, ladder, railings, brackets, gates and
similar works.
83 CG PWD 3.900 Extra for precast PCC/ RCC work of any mix including form work, 1.13 Cum
BUIDLING hoisting and fixing in Cement Mortar. 1:2 (1 Cement : 2 coarse sand)
SOR 2015 and finishing with cement plaster in Cement Mortar 1:3 (1 Cement : 3
coarse sand) but excluding reinforcement.
(SOR. ITEM NO.-3.9/24)
84 CG PWD 9.3.1 9.3steel work in tubular (round, square or rectangular hollow tubes 601.30 Kg
BUIDLING etc.) structure in built-up sections, trusses and frame work including
SOR 2015 cuttinghoisting, fixing in position upto a height of 5m above plinth
level,consisting of columns trusses, roof and bottom purlins, base plate,
holdingdown bolts, wind ties bracing (if required), bolts, nuts and
washers forfastening etc. complete with applying a priming coat of red
oxide zincchromate primer.
9.3.1Electric resistance or induction butt welded tubes Grade-250
85 CG PWD 10.13 10.13 Supply and fixing of precoated TILE PATTERN profile sheets of 107.05 Sqm
BUIDLING approved make, colour, over all size, corrugation shape and pitch, having
SOR 2015 total coated thickness (TCT) 0.45 mm (approx weight 4.9 kg/sqm) with
Zn-Al coating and superior paint and having yeild strength of 550 MPa.
Sheet should have protective guard film of 25 microns minimum to avoid
scratches while transportation. The sheet shall be fixed using self drilling
/self tapping screws of size (5.5x 55mm) with EPDM seal or with
polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen
and G.I. limpet washers or with G.I. limpet washers filled with white
lead complete upto any pitch excluding the cost of purlins, rafters and
trusses and including cutting to size and shape wherever required.

Page 10 of 17
SN SOR REF ITEM DESCRIPTION QTY UNIT
NO
86 CG PWD 10.16.6 10.16 Providing and fixing precoated galvanised steel sheet roofing 64.97 meter
BUIDLING accessories 0.50 mm +/- 5% total coated thickness (TCT), Zinc coating
SOR 2015 120gsm as per IS: 277 in 240mpa steel grade, 5-7 microns epoxy primer
on both side of the sheet and polyester top coat 15-18 microns using self
drilling/ self tapping screws or with polymer coated J or L hooks, bolts
and nuts and or G.I. seam bolts and nuts, G.I. plain and bitumen washers
complete :
10.16.6 Gutter. (600 mm over all girth).
87 CG PWD 10.16.4 10.16 Providing and fixing precoated galvanised steel sheet roofing 30.72 meter
BUIDLING accessories 0.50 mm +/- 5% total coated thickness (TCT), Zinc coating
SOR 2015 120gsm as per IS: 277 in 240mpa steel grade, 5-7 microns epoxy primer
on both side of the sheet and polyester top coat 15-18 microns using self
drilling/ self tapping screws or with polymer coated J or L hooks, bolts
and nuts and or G.I. seam bolts and nuts, G.I. plain and bitumen washers
complete :
10.16.4 Barge board (Upto 300 mm)
88 CG PWD 10.12 10.12 Supply and fixing of polymer precoated galvalume profile sheets 45.40 Sqm
BUIDLING (PPGL) of approved size, shape and pitch of corrugation, total coated
SOR 2015 thickness (TCT) 0.60 mm +/- 5%, epoxy primer on both side of the sheet
and colour polyester top coat 18-20 microns and 6-7 microns on bottom.
Sheet should have protective guard film of 25 microns minimum to avoid
scratches while transportation and should be supplied in single length
upto 12 metre or as desired by Engineer-in-charge. The sheet shall be
fixed using self drilling /self tapping screws of size (5.5x 55mm) with
EPDM seal or with polymer coated J or L hooks, bolts and nuts 8mm
diameter with bitumen and G.I. limpet washers or with G.I. limpet
washers filled with white lead complete upto any pitch in horizontal/
vertical or curved surfaces excluding the cost of purlins, rafters and
trusses and including cutting to size and shape wherever required.

89 CG PWD 10.24.1 10.24 Providing & fixing UV stabilized fibreglass reinforced plastic 72.00 Sqm
BUIDLING (FRP) sheet roofing upto any pitch including fixing with polymer coated
SOR 2015 'J' or 'L' hooks, bolts & nuts 8mm dia. G.I plain/bitumen washers
complete but excludingthe cost of purlins, rafters, trusses etc. The sheets
shall be manufactured out of 2400 TEX panel rovings incorporating
minimum 0.3% Ultra-violet
stabiliser in resin system under approximately 2400 psi and hot cured.
They shall be of uniform pigmentation and thickness without air pockets
and shall conform to IS 10192 and IS 12866.The sheets shall be opaque
or translucent, clear or pigmented, textured or smooth as specified.
10.24.1 2mm thick corrugated (2.5" or 4.2" or 6") or step-down (2"or
3"or 6") as specified.

90 CG PWD 10.15 10.15 Extra for working height above 6 metre for fixing GI/ profile/ 72.00 Sqm
BUIDLING PVC/ polycarbonate sheet for every additional height of 1 metre of part
SOR 2015 thereof.

Page 11 of 17
SN SOR REF ITEM DESCRIPTION QTY UNIT
NO
91 CG PWD 21.1.1.3 Boring/drilling bore well perfectly vertical for the specified depth 73.15 meter
BUIDLING suitable to receive required dia for casing/ strainer pipe, by suitable
SOR 2015 method prescribed in IS: 2800 (part I), including collecting samples from
different strata, preparing and submitting strata chart/bore log,
including hire & running charges of all equipments, tools, plants &
machineries required for the job, all complete as per direction of
Engineer–in-charge upto 90 metre depth below ground level.
(a)All Types of soil - 150 mm dia

92 CG PWD 21.5.3 Supplying, assembling, lowering and fixing in vertical position in bore 60.00 meter
BUIDLING well, ISI marked G.I. casing pipe (Plain) medium class in 4 to 7 meters
SOR 2015 length one end fitted with socket as per IS: 1239 (Part-1&Part-2) 1992
with IVth revision (Up-to-date amendments), of reputed & approved
make, including required hire & labour charges, fittings & accessories,
all complete, for all depths, as per direction of Engineer- in-charge.
150 mm dia
(SOR ITEM NO. 21.5.3/199

93 CG PWD 21.11.3 Providing and fixing suitable size threaded mild steel cap or spot welded 3.00 Each
BUIDLING plate to the top of bore well housing/ casing pipe, removable as per
SOR 2015 requirement, all complete for bore well of:
150mm dia
(SOR ITEM NO. 21.11.3/200)
94 CG PWD 21.14.1 21.14 Supplying, filling, spreading & leveling stone boulders/ Gravels/ 12.00 cum
BUIDLING Coarse sand, in recharge pit, in the required layers and thickness, for all
SOR 2015 leads & lifts, all complete as per direction of Engineer-in-charge.
(excavation of pit will be paid separately).
21.14.1 Stone boulders of size range 5 cm to 20 cm, in recharge pit
95 CG PWD 21.14.2 21.14 Supplying, filling, spreading & leveling stone boulders/ Gravels/ 7.20 cum
BUIDLING Coarse sand, in recharge pit, in the required layers and thickness, for all
SOR 2015 leads & lifts, all complete as per direction of Engineer-in-charge.
(excavation of pit will be paid separately).
21.14.2 Gravels of size range 5 mm to 10 mm, over the existing layer of
boulders
96 CG PWD 21.14.3 21.14 Supplying, filling, spreading & leveling stone boulders/ Gravels/ 5.40 cum
BUIDLING Coarse sand, in recharge pit, in the required layers and thickness, for all
SOR 2015 leads & lifts, all complete as per direction of Engineer-in-charge.
(excavation of pit will be paid separately).
21.14.3 Coarse sand of size range 1.5 mm to 2 mm over existing layer of
gravel
97 CG PWD 22.7 22.7 Fine dressing the ground 422.98 Sqm
BUIDLING
SOR 2015
98 CG PWD 22.2 22.2 Suppling and stacking of good earth at site including 24.20 cum
BUIDLING royalty,loading,unloading and carriage upto 10km(earth measured in
SOR 2015 stacks will be reduced by 20% for payment)
(Building SOR. ITEM NO.-22.2/204)
99 CG PWD 22.12 22.12 Uprooting rank vegetation and weeds by digging the area to a 40.33 sqm
BUIDLING depth of 60cm removing all weeds and other growth with roots by
SOR 2015 forking repeatedly, breaking clods, rough dressing, flooding with water,
uprooting fresh growths after 10 to 15 days and then fine dressing for
planting new grass, including disposal of all rubbish with all leads and
lifts.
(Building SOR. ITEM NO.-22.12/205)
Page 12 of 17
SN SOR REF ITEM DESCRIPTION QTY UNIT
NO
100 CG PWD 22.4 22.4 Supplying and stacking at site well decayed cow dung manure from 8.07 cum
BUIDLING approved source, including loading, unloading and carriage upto 5 km
SOR 2015 (manure measured in stacks will be reduced by 8% for payment).
(Building SOR. ITEM NO.-22.4/204)

101 CG PWD 22.6 22.6 Uprooting weeds from the trenched area after 10 to 15 days of its 40.33 sqm
BUIDLING flooding with water including disposal of uprooted vegetation.
SOR 2015 (Building SOR. ITEM NO.-22.6/205)
102 CG PWD 22.8 22.8 Spreading of sludge, dump manure or/and good earth in required 8.07 cum
BUIDLING thickness (Cost of sludge, dump manure or/ and good earth to be paid
SOR 2015 separately).
(Building SOR. ITEM NO.-22.7/205)

103 CG PWD 22.9

22.9 Mixing earth and sludge or manure in proportion specified or 8.07 cum
BUIDLING directed.
SOR 2015 (Building SOR. ITEM NO.-22.9/205)
104 CG PWD 22.10.3 22.10 Grassing with ‘Doob’ grass including watering and maintenance 40.33 sqm
BUIDLING of the lawn for 30 days or more till the grass forms a thick lawn free from
SOR 2015 weeds and fit for mowing including supplying good earth if needed (the
good earth shall be paid for separately).
22.10.3 In rows 5 cm apart in either direction.
(Building SOR. ITEM NO.-22.10.3/205)
105 CG PWD 22.25.4 Providing and Planting following herbs in garden including preparation 40.33 sqm
BUIDLING of soil,base plantation, providing and spreading different fertilizers,soil
SOR 2015 and sand.
22.25.4 Carpet Grass(Well developed)
(Building SOR. ITEM NO.-22.25.4/207)
106 CG PWD 22.25.1 22.25.1 Hedges like Alife, Dorenta, Tikoma etc 200.00 each
BUIDLING
SOR 2015
107 CG PWD 22.25.2. 22.25.2 Furn like Arica, China etc (3 year old) 200.00 each
BUIDLING
SOR 2015
108 CG PWD 22.25.3 22.25.3 Hibiscus (Flower)/ Rose 200.00 each
BUIDLING
SOR 2015
109 CG PWD 22.16 22.16 Providing and fixing M.S. flat iron tree guard 60cm dia. and 2m 2.00 each
BUIDLING height above ground level formed of 4 nos. 25x6mm and 8 nos. 25x3mm
SOR 2015 vertical M.S. flats riveted to 3 nos. 25x6mm M.S. flat iron rings in two
halves, bolted together with 8mm dia. and 30mm long bolts including
painting two coats with paint of approved brand and manufacture over a
coat of priming, complete in all respects.
110 CG PWD 16.3.3 16.3 Demolishing brick masonry including arches, stacking of 161.31 Cum
BUIDLING serviceable
SOR 2015 material disposal of unserviceable material within 50 metres lead.
16.3.3 In cement mortar.
111 CG PWD 16.17 16.17 Dismantling G.I. sheet roofing including ridges hips, valleys and 26.89 Sqm
BUIDLING gutters
SOR 2015 etc. and stacking the material with 50 m lead.
112 CG PWD 16.43.2 16.43 Demolishing cement concrete including disposal of material within 9.27 Cum
BUIDLING 50 metre lead.
SOR 2015 16.43.2 1:3:6 or richer mix

Page 13 of 17
SN SOR REF ITEM DESCRIPTION QTY UNIT
NO
113 CG PWD 16.42 16.42 Demolishing R.C.C. work including stacking of steel bars and 21.67 cum
BUIDLING disposal of
SOR 2015 unserviceable material within 50 metre lead.
114 CG PWD 16.53.1 16.53 Removing following vitreous china sanitorywares carefully for re- 9.00 each
BUIDLING use
SOR 2015 including stacking within 50 metres lead.
16.53.1 Wash basin of all sizes and shapes
115 CG PWD 16.53.3 16.53 Removing following vitreous china sanitorywares carefully for re- 9.00 each
BUIDLING use
SOR 2015 including stacking within 50 metres lead.
16.53.3 European/ Anglo Indian WC pan of all sizes
116 CG PWD 16.31 16.31 Dismantling steel work in built-up section in angles, channels, 815.60 Kg
BUIDLING flats Isection and T-section including all gusset plates, bolts, nuts, cutting
SOR 2015 rivets, welding etc., including dismembering and stacking within 50
metres lead.
As Per CG PWD Buidling SOR 2015 & Its Amendment- Rs. 52,06,612.00
117 CG PWD 3.7.1 Wiring for light/ fan/ exhaust fan / call bell point with 1.5 sqmm FR 45 Point
ELECTRIC PVC insulated stranded copper conductor single core cable in concealed
AL SOR PVC conduit, with 5 amp modular switch, modular base and cover plate,
2015 suitable size G.I. box and earthing the point with same size cable as
required.
Short Point
118 CG PWD 3.7.2 Wiring for light/ fan/ exhaust fan / call bell point with 1.5 sqmm FR 90 Point
ELECTRIC PVC insulated stranded copper conductor single core cable in concealed
AL SOR PVC conduit, with 5 amp modular switch, modular base and cover plate,
2015 suitable size G.I. box and earthing the point with same size cable as
required.
Medium Point
119 CG PWD 3.7.3 Wiring for light/ fan/ exhaust fan / call bell point with 1.5 sqmm FR 220 Point
ELECTRIC PVC insulated stranded copper conductor single core cable in concealed
AL SOR PVC conduit, with 5 amp modular switch, modular base and cover plate,
2015 suitable size G.I. box and earthing the point with same size cable as
required.
Long Point
120 CG PWD 3.8 Wiring for twin control light point with 1.5 sqmm FR PVC insulated 8 Point
ELECTRIC stranded copper conductor single core cable in concealed PVC conduit,
AL SOR with 5 amp modular switch, modular base and cover plate, suitable size
2015 G.I. box and earthing the point with same size cable as required.

121 CG PWD 3.9 Extra for providing and fixing light plug point on board in concealed 120 Point
ELECTRIC PVC conduit point wiring with modular type 3 pin 5 amp socket outlet
AL SOR and 5 amp switch including cost of base and cover plate and G. I. box
2015 etc. as required.
122 CG PWD 3.13.1 Wiring for circuit/ sub main wiring along with earth wire with the 320 meter
ELECTRIC following sizes of FR PCV insulated copper conductor, single core cable
AL SOR in concealed PVC conduit as required.
2015 3 X 1.5 sq mm in 20mm conduit
123 CG PWD 3.13.2 Wiring for circuit/ sub main wiring along with earth wire with the 290 meter
ELECTRIC following sizes of FR PCV insulated copper conductor, single core cable
AL SOR in concealed PVC conduit as required.
2015 3 X 2.5 sq. mm in 20mm conduit

Page 14 of 17
SN SOR REF ITEM DESCRIPTION QTY UNIT
NO
124 CG PWD 3.13.3 Wiring for circuit/ sub main wiring along with earth wire with the 220 meter
ELECTRIC following sizes of FR PCV insulated copper conductor, single core cable
AL SOR in concealed PVC conduit as required.
2015 6 X 2.5 sq. mm in 25mm conduit
125 CG PWD 3.13.4 Wiring for circuit/ sub main wiring along with earth wire with the 110 meter
ELECTRIC following sizes of FR PCV insulated copper conductor, single core cable
AL SOR in concealed PVC conduit as required.
2015 9 X 2.5 sq. mm in 32mm condiut
126 CG PWD 3.13.5 Wiring for circuit/ sub main wiring along with earth wire with the 90 meter
ELECTRIC following sizes of FR PCV insulated copper conductor, single core cable
AL SOR in concealed PVC conduit as required.
2015 12 X 2.5 sq. mm in 32mm conduit
127 CG PWD 3.13.8 Wiring for circuit/ sub main wiring along with earth wire with the 60 meter
ELECTRIC following sizes of FR PCV insulated copper conductor, single core cable
AL SOR in concealed PVC conduit as required.
2015 3 X 10 sq. mm in 25mm conduit
128 CG PWD 7.4.8 Supplying and fixing following modular switch, socket, other accessories 120 Each
ELECTRIC on the existing modular plate & switch box including connections but
AL SOR excluding modular plate etc. as required.
2015 Fan regulator (two module size) electronic stepped type moving all
rounds
129 CG PWD 7.9 Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction 200 Each
ELECTRIC box/ wooden block including connection etc. as required.
AL SOR
2015
130 CG PWD 7.12 Supplying and fixing polycarbonate batten/angle holder including 90 Each
ELECTRIC flexible connection etc. as required.
AL SOR
2015
131 CG PWD 11.5.5 Supplying and fixing on surface/ recess vertical type following way, 415 4 Each
ELECTRIC volts, TPN MCB distribution board of sheet steel phosphatized and
AL SOR powder painted, with 200 amps tinned copper busbar, common neutral
2015 link, earth bar, din bar, detachable gland/ knock out plate, including
interconnections, earthing etc. as required. (But without
MCB/RCCB/Isolator) (Note : Vertical type MCB TPDB is normally
used where 3 phase outlets are required.)
8 way (4 + 24), Double door
132 CG PWD 11.11.2 Supplying and fixing SP MCB 240 volts, "C" series suitable for inducti 80 Each
ELECTRIC ve loads in the existing MCB DB complete with connections, testing and
AL SOR commissioning etc. as required.
2015 6 amps to 32 amps
133 CG PWD 11.16.5 Supplying and fixing TP&N MCB, 440 volts, 'C' curve, suitable for 4 Each
ELECTRIC lighting and other loads in the existing MCB DB complete with
AL SOR connections, testing and commissioning etc. as required.
2015 63 amps
134 CG PWD 3.11.3 Wiring for power plug point with 2x4 sq mm FR PVC insulated stranded 10 Point
ELECTRIC copper conductor cable in concealed PVC conduit along with modular
AL SOR type 16 Amp switch and 6 pin 16 amps socket outlet with modular base
2015 and cover plate, suitable size G.I. box, earthing the switch box and
socket outlet with same size cable etc. as required.
Long Point

Page 15 of 17
SN SOR REF ITEM DESCRIPTION QTY UNIT
NO
135 CG PWD 3.11.4 Wiring for power plug point with 2x4 sq mm FR PVC insulated stranded 15 Point
ELECTRIC copper conductor cable in concealed PVC conduit along with modular
AL SOR type 16 Amp switch and 6 pin 16 amps socket outlet with modular base
2015 and cover plate, suitable size G.I. box, earthing the switch box and
socket outlet with same size cable etc. as required.
Extra Long Point I
136 CG PWD 3.11.5 Wiring for power plug point with 2x4 sq mm FR PVC insulated stranded 15 Point
ELECTRIC copper conductor cable in concealed PVC conduit along with modular
AL SOR type 16 Amp switch and 6 pin 16 amps socket outlet with modular base
2015 and cover plate, suitable size G.I. box, earthing the switch box and
socket outlet with same size cable etc. as required.
Extra Long Point II
137 CG PWD 3.11.6 Wiring for power plug point with 2x4 sq mm FR PVC insulated stranded 20 Point
ELECTRIC copper conductor cable in concealed PVC conduit along with modular
AL SOR type 16 Amp switch and 6 pin 16 amps socket outlet with modular base
2015 and cover plate, suitable size G.I. box, earthing the switch box and
socket outlet with same size cable etc. as required.
Extra Long Point III
138 CG PWD 8.6.1 Supplying, installation, testing and commissioning of following sizes 12 Each
ELECTRIC fancy exhaust fan having built in lovers in existing opening in wall
AL SOR including earthing etc. complete as required.
2015 300 mm sweep
139 CG PWD 8.22.4 Supplying, fixing, testing and commissioning of following LED lamps 70 Each
ELECTRIC with inbuilt electronic driver heat sink and all other accessories in
AL SOR existing holder/ luminaries as required and furnishing 2 Yrs Guarantee
2015 certificate from manufacturer.
9 Watt
140 CG PWD 8.20.3 Supplying, installation, testing and commissioning of following LED 40 Each
ELECTRIC fitting (luminaries) down lighters in round/ square shape complete with
AL SOR electronic driver heat sink capacitor and all other accessories on surface/
2015 in false ceiling etc. as required and furnishing 2 Yrs Guarantee certificate
from manufacturer.
12 Watt
141 CG PWD 17.5.14 Supplying and laying following sizes one number PVC insulated/ XLPE, 120 Metre
ELECTRIC PVC sheathed, steel armoured, aluminium conductor power cable of 1.1
AL SOR KV grade on surface/ existing cable tray with 1 mm thick GI saddle as
2015 required.
4 x 16 sq. mm.
142 CG PWD 17.5.11 Supplying and laying following sizes one number PVC insulated/ XLPE, 60 Metre
ELECTRIC PVC sheathed, steel armoured, aluminium conductor power cable of 1.1
AL SOR KV grade on surface/ existing cable tray with 1 mm thick GI saddle as
2015 required.
3.5 x 25 sq. mm.
143 CG PWD 14.4 Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick 4 Set
ELECTRIC including accessories, and providing masonry enclosure with cover plate
AL SOR having locking arrangement and watering pipe, with charcoal and salt as
2015 required.
144 CG PWD 14.5 Supplying and laying 8 SWG copper wire at 0.50 metre below ground 80 Metre
ELECTRIC level for conductor earth electrode, including soldering etc. as required.
AL SOR
2015

Page 16 of 17
SN SOR REF ITEM DESCRIPTION QTY UNIT
NO
145 CG PWD 9.11.4 Providing and fixing porcelain re-wireble fuse carrier and base unit on 6 Each
ELECTRIC wooden board including drilling holes on the board, screws, connections
AL SOR etc. as required. (Thimbeling shall be paid separately).
2015 100 amps
146 CG PWD 8.30.3 Supplying, installation, testing and commissioning of following 230/250 6 Each
ELECTRIC volts LED street light fitting with all accessories like driver, heat sink
AL SOR made of die cast aluminium with IP 66 protection and 5 KV surge
2015 protection on pole bracket complete as required and furnishing 2 Yrs
Guarantee certificate from manufacturer.
60 watt
147 CG PWD 9.8.6 Supplying and fixing metal clad busbar chamber made of 1.6 mm thick 2 Each
ELECTRIC CRCA sheet with 4 strip copper busbars of following capacity and
AL SOR length, complete with all accessories, including earthing the body etc. as
2015 required.
200 amps x 600mm long
148 CG PWD 9.1 Supplying and fixing wall/ floor mounted metal board of welded 5 sqm
ELECTRIC construction, fabricated with minimum 50mmX 50mm X 6mm angle
AL SOR iron frame work, with horizontal and vertical intermediate members of
2015 suitable angle/flat iron for mounting of switch gears including painting
etc. as required.
149 CG PWD 11.1.9 Providing and fixing following rating and breaking capacity MCCB in 2 Each
ELECTRIC existing cubicle panel board including drilling holes in cubicle panel,
AL SOR making connections, etc. as required.
2015 3 pole MCCB, 200A, Adjustable Thermal - Magnetic Release, 35KA
150 CG PWD 5.14 Supplying and drawing UTP 4 pair Cat 6 LAN cable in existing surface/ 1600 metre
ELECTRIC concealed steel/ PVC conduit as required.
AL SOR
2015
151 CG PWD 3.10.4 Wiring for light plug point with 2x2.5 sq mm FR PVC insulated stranded 30 Point
ELECTRIC copper conductor cable in concealed PVC conduit along with modular
AL SOR type 6 Amp switch and 3 pin 6 amps socket outlet with modular base and
2015 cover plate, suitable size G.I. box, earthing the switch box and socket
outlet with same size cable etc. as required.
Extra Long Point I
152 CG PWD 8.1 Supplying, installation, testing and commissioning of following sizes 120.00 Each
ELECTRIC ceiling fan with resisstance type regulator,including wiring the down
AL SOR rods of standard length up to 30 cm with,1.5 sq. mm FR PVC insu-lated,
2015 copper conductor, single core cable, earthing etc.complete as required.

153 CG PWD 8.11.1 Supplying, installation, testing and commissioning of following T-5 140 Each
ELECTRIC fluorescent fitting (luminaries) complete with electronic ballast but
AL SOR without fluorescent lamp, on ceiling/ wall surface, earthing the fitting
2015 etc. as required.
Single box type with decorative end caps
154 CG PWD 8.12.2 Supplying, fixing, testing and commissioning of following 230/250 volts 140 Each
ELECTRIC fluorescent lamp (tube) in existing lighting luminaries as required.
AL SOR 4' x 28 watt (T-5)
2015
As Per CG PWD Electrical SOR 2015- Rs. 13,31,083 .00
155 CG PWD 12.14 12.14 Cement art Mural work 51.46 sqm
ROAD SOR CG PWD ROAD 2015
2015
As Per CG PWD ROAD SOR 2015- Rs. 1,80,110.00
G.Total Rs. 67,17,805.00
Page 17 of 17