Scribd
Upload
364 views1 page

Hunting Hunting - Anti.blow Up - Tool.datasheet

The document describes an anti blow-up tool used in slickline operations. The tool prevents toolstrings from being blown up production tubing by excessive cross flow between zones. It works by using arms that lock into the tubing wall to stop upward travel if blown in that direction. A controlled pull then releases the arms and toolstring. The anti blow-up tool is available for tubing sizes from 2 3/8 to 3 1/2 inches.

Uploaded by

casda73
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
364 views1 page

Hunting Hunting - Anti.blow Up - Tool.datasheet

The document describes an anti blow-up tool used in slickline operations. The tool prevents toolstrings from being blown up production tubing by excessive cross flow between zones. It works by using arms that lock into the tubing wall to stop upward travel if blown in that direction. A controlled pull then releases the arms and toolstring. The anti blow-up tool is available for tubing sizes from 2 3/8 to 3 1/2 inches.

Uploaded by

casda73
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

WIRELINE OPERATIONS: SLICKLINE TOOLS

Slickline Tools

Wireline Equipment Catalogue v.3.2 | Slickline Tools

Anti Blow-up Tool

Wireline Operations - Slickline Tools


The Hunting Anti Blow-Up Tool is designed to be used in the toolstring
when downhole instrumentation tools are deployed in a well with multi
zoned completions.

The anti blow-up tool prevents toolstrings from being blown up the production
tubing by excessive cross flow between zones.

The tool is designed such that in the event of its being blown upwards, the
bottom sub lifts up and drives out two arms that lock into the tubing wall,
stopping any further upward travel.

The anti blow-up tool prevents toolstrings from


being blown up the production tubing by excessive
cross flow between zones.

Subsequently, a controlled pull on the wireline will lift up the top sub and retract
the arms to release the toolstring.

Hunting Anti Blow-up Tools are available to suit all production tubing sizes from
2 3/8” - 3 1/2”. They are supplied with industry standard pin by box connections
complete with fishing necks.

ANTI BLOW-UP TOOL

Tubing Fishing
Connection Part Number
Size Neck

2.375” 1.375” 15/16-10 169-2375-001

2.875” 1.375” 15/16-10 169-2875-001

3.500” 1.375” 15/16-10 169-3500-001

Bespoke sizes available on request.

w. www.hunting-intl.com | e. [email protected]

You might also like