Scribd
Upload
293 views1 page

Eave to Slab Construction Detail

This document provides construction details for a roof, including a ridge detail, valley gutter detail, and eave to slab detail. Rafters are made of 2x6 wood and are bolted together with hurricane straps every rafter. Blocking is placed at the ridge and eave, and battens are spaced as required along the roof. A cement mortar fills between the rafters and 2x6 edge rafters extend to the eave.

Uploaded by

Jordan Brown
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
293 views1 page

Eave to Slab Construction Detail

This document provides construction details for a roof, including a ridge detail, valley gutter detail, and eave to slab detail. Rafters are made of 2x6 wood and are bolted together with hurricane straps every rafter. Blocking is placed at the ridge and eave, and battens are spaced as required along the roof. A cement mortar fills between the rafters and 2x6 edge rafters extend to the eave.

Uploaded by

Jordan Brown
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

Ex.

1"x6"(25x150mm) wpp
43 dressed plyboard
"
[114
8]
Ex. 1"x2"(25x50mm) wpp battens
spaced as required
2'-
[61 0" End of 2"x6"(50x150mm)
0]
wpp rafters
1'- 1
4
[41 2 "
9] Ex. 2"x6"(50x150mm) edge rafters
1'- 1
Cement mortar filling 4 bolted to both sides of each
[42 2 " common rafters
1]
Twisted hurricane
straps @ every 2"
rafter [51
]
Bird stop eave

]
2"
[48
closure on 2"x2"

[300]
(50x50mm) lathe

1'-0"
Ex. 1"(25mm) thick
wpp blocking

RIDGE DETAIL Slab roof

Scale 1:10

EAVE TO SLAB DETAIL


VALLEY GUTTER DETAIL Scale 1:10
Scale 1:10

You might also like