Bosch Rexroth AG
Spare parts list Service Hydraulics
Bgm.-Dr.-Nebel-Str. 8
Material number: R900932161 97816 Lohr
Germany
Drawing: RA50712190
Designation: INTERNAL GEAR PUMP
PGH4-2X/032RE11VE4
Status of version: 04/2021 Date: 23.06.2021
Page: 1
Pos. Material number Designation Quantity
998 R900888524 REPAIR KIT 1 UNIT L
PGH4-2X/032
999 R900984759 SEAL KIT 1 UNIT L
PGH4-2X/.V
L = Assembly group D = Sealing element
Security notice:
Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.
Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192
Vorstand / Executive Board: Rolf Najork (Vorsitzender / President), Dr. Markus Forschner, Dr. Heiner Lang, Reinhard Schäfer, Dr. Marc Wucherer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Christoph Kübel
Bosch Rexroth AG
Spare parts list Service Hydraulics
Bgm.-Dr.-Nebel-Str. 8
Material number: R900932161 97816 Lohr
Germany
Drawing: RA50712190
Designation: INTERNAL GEAR PUMP
PGH4-2X/032RE11VE4
Status of version: 04/2021 Date: 23.06.2021
Page: 2
L = Assembly group D = Sealing element
Security notice:
Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.
Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192
Vorstand / Executive Board: Rolf Najork (Vorsitzender / President), Dr. Markus Forschner, Dr. Heiner Lang, Reinhard Schäfer, Dr. Marc Wucherer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Christoph Kübel
Bosch Rexroth AG
Spare parts list Service Hydraulics
Bgm.-Dr.-Nebel-Str. 8
Material number: R900888524 97816 Lohr
Germany
Drawing: RA50712190
Designation: REPAIR KIT
PGH4-2X/032
Status of version: 04/2021 Date: 23.06.2021
Page: 3
Pos. Material number Designation Quantity
60 CONTROL DISC 1 UNIT
70 THRUST WASHER 1 UNIT
90 CARRIER 1 UNIT
100 SEGMENT 1 UNIT
110 SHAPED SPRING 3 UNIT
120 IDLE ROLLER 2 UNIT
130 ROD SPRING 1 UNIT
999 SEAL KIT 1 UNIT L
1001 CORRUGATED CARD BOARD BOX 1 UNIT
L = Assembly group D = Sealing element
Security notice:
Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.
Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192
Vorstand / Executive Board: Rolf Najork (Vorsitzender / President), Dr. Markus Forschner, Dr. Heiner Lang, Reinhard Schäfer, Dr. Marc Wucherer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Christoph Kübel
Bosch Rexroth AG
Spare parts list Service Hydraulics
Bgm.-Dr.-Nebel-Str. 8
Material number: 97816 Lohr
Germany
Drawing: RA50712190
Designation: SEAL KIT
Status of version: 04/2021 Date: 23.06.2021
Page: 4
Pos. Material number Designation Quantity
140 SEAL 1 UNIT
150 SEAL 1 UNIT
160 BACKUP RING 2 UNIT
230 RING 1 UNIT
240 SHAFT SEALING RING 2 UNIT
260 O-RING 2 UNIT
270 O-RING 2 UNIT
1001 CORRUGATED CARD BOARD BOX 1 UNIT
L = Assembly group D = Sealing element
Security notice:
Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.
Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192
Vorstand / Executive Board: Rolf Najork (Vorsitzender / President), Dr. Markus Forschner, Dr. Heiner Lang, Reinhard Schäfer, Dr. Marc Wucherer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Christoph Kübel
