Safety Signage Training Center SMK Negeri 1 Balikpapan
Module Descriptor
MODULE SAFETY SIGNAGE
NOMINAL DURATION
This module has been designed in accordance with Thiess Management System , which
means that its aim is simply to train students to carry out the given tasks to a certain
level of competence.
However, it is assumed that most of the trainees will achieve the basic competencies
specified in 150 minutes. The length of time taken to complete a module will vary
depending on factors such as teaching method used, knowledge and skills entry, and the
individual student's ability.
PURPOSE
This module aims to provide all employees with the knowledge and skills necessary to
control safety related behavior, to warn of hazards and provide emergency information
including fire protection information in accordance with Thiess Policy and generally
accepted procedures.
WORKPLACE HEALTH AND SAFETY
Trainees must be made aware of relevant workplace health and safety issues in all
situations and are required to demonstrate safe working practices at all times. The work
area must comply with current workplace health and safety legislation.
QUALITY ASSURANCE
Clients are assured that requirements of this module are delivered and assessed
according to the legal and health authorities standards.
Regular evaluation and standards review will monitor the achievements of this
commitment.
SOCIAL JUSTICE
Principles of social justice must be appropriately addressed in all aspects of this module's
implementation. In rare cases workplace health and safety legislation may impinge on
social justice considerations.
PREREQUISITES
NIL
Kesehatan dan Keselamatan Kerja / HSE
Safety Signage Training Center SMK Negeri 1 Balikpapan
RESOURCE REQUIREMENTS
The following minimum human and physical resources must be available for the delivery
of this module
HUMAN RESOURCES
Instructors will have a qualifications of an equivalent or higher level relevant to the
module being taught, recent industry experience and have completed an Instructional
Skills Course or its equivalent.
PHYSICAL RESOURCES
Safety Signage
Tags
Marking
Tapes/Barier
TEXTS/REFERENCES
The Training Module Handout Package.
Thiess Occupational Health & Safety Management Policy
TCI-OHS-SP013 Health and Safety Promotion
Australian Standard AS 1319-1994 Safety Signs for the Occupational Environment
CONTENT
Focus should be on the learning outcomes and not on content. Some topics may not require
in-depth teaching in this module, as they will be addressed fully elsewhere. In achieving the
learning outcomes, the following topics shall be addressed:
Classification and lay out Safety Sign
Incidents Prevention Tags
Mains marking
Pipe Markers
Demarcation tapes
Hazchem Symbol
DELIVERY
SUGGESTED MODES
Emphasis has been placed on safety throughout the program and it is important that the
instructor constantly emphasizes this. Wherever possible, the instruction should be of a
practical nature and provide the trainee with a high degree of 'hands-on' exposure.
While some topics may require a classroom venue for theoretical explanations, it is
suggested that this be kept to a minimum. For practical purposes it is recommended
Kesehatan dan Keselamatan Kerja / HSE
Safety Signage Training Center SMK Negeri 1 Balikpapan
that the number of trainees per course be limited to fifteen in order that each may
receive full benefit of the practical content.
SUGGESTED TEACHING/LEARNING STRATEGIES
As far as possible, the development of this training package is designed to include all the
necessary theory required to effectively meet the objectives set. Practical skill will
largely be developed through practical operational experience gained during the
'Performance Enhancement Component' of the module. The amount of time required to
develop these skills may vary between individuals and their exposure to the equipment.
LEARNING OUTCOMES
Outcome : Demonstrate to the employee can be correctly interpreted the
application of the signs and symbols to their own work activities.
Assessment : Undertake a written assessment where the trainee will be required to
demonstrate familiarity regarding Safety Signage
ASSESSMENTS
The learning outcome may be assessed through the assessment instruments provided
with this training module. The trainee will be deemed to have acquired the desired
competency standard when he/she can demonstrate Safety signs for the
Occupational Environment.
Kesehatan dan Keselamatan Kerja / HSE
