Seamless Tubes Division

Core Values
Integrity
Conduct all business dealings along
transparent lines.

Respect for Individual

Recognise each individual's contribution in
the growth and development of the Company.
Treat all Jindalites with respect and dignity.

Meritocracy
Foster an environment of excellence in
performance.

Dynamic Thinking
Demonstrate a winner's attitude with a crystal
clear focus to deliver sustained value for all
Stakeholders.

Creativity & Innovation

Encourage creative experimentation,
embrace new ideas and institutionalize
continuous improvement in all aspects of
business and performance.

Social Responsibility
Dedicate efforts to the social and
environmental issues to enrich the quality of
life of the communities we serve.’
The Jindal Group
The first Jindal plant was set up in 1970 by the visionary, Mr. O.P. Jindal. Over the years, the organisation has
grown from a single-unit steel plant in Hissar, Haryana, India, to become what it is today - a multi-billion dollar,
multi-location and multi-product steel conglomerate.

With every new objective, the organization has been continuously expanding, integrating, amalgamating and
growing in new directions.

The Jindal name proudly commands a special status in the Iron & Steel sector. Ranked fourth amongst the top
Indian Business Houses in terms of assets, the Group today is a US $18.5 Billion conglomerate, spread over 13
plants at 10 strategic locations in India and various facilities across the globe. Major group companies include
Jindal Saw Limited, JSW Steel Ltd., Jindal Steel & Power Ltd. and Jindal Stainless Ltd.

Jindal Saw Limited

Jindal Saw Ltd., (JSL) provides Total Pipe Solutions and is the leading manufacturer of Seamless Tubes and
Pipes, Large Diameter submerged Arc Welded pipes, and Ductile Iron Pipes The company has 4
manufacturing plants located in India and one at Baytown, Houston, Texas (USA). It has a sales turnover in
excess of US $ 1 billion.

Jindal Saw Limited

(Seamless Tubes Division)
The Seamless Tubes Division produces Tubes &
Pipes at a state-of-the-art manufacturing facility at
Nashik, approximately 200 kms from Mumbai, in
Maharashtra, India. The expertise and equipment
have been acquired from SMS-MEER of Germany -
acknowledged world leaders in Seamless Tube &
Pipe technology.

Cutting-edge Technology
With an annual installed capacity of 220,000 M Tons
for Carbon & Alloy Steel Pipes, the plant is equipped
with modern manufacturing machinery and boasts a
state-of-the-art PQF Mill from SMS MEER, Germany.
Additionally, we have a modern Quench and
Temper Furnace, Upsetter, Hydro tester, MAC EMI &
UT and PMC Threading machines.

Our coating plant provides Fusion Bonded Epoxy (FBE), 3-layer Polyethylene (3LPE) External coating, and 3-
layer Polypropylene (3LPP) External coating Up-to-date testing facilities complete the gamut, ensuring that all of
our products that reach the market meet international standards.
 At Jindal Saw, we firmly believe that Quality translates into Success

Quality of Thought
Innovation and flexibility in thinking allows us to look at ideas from
diverse perspectives, enabling us to venture into uncharted territories
and discover newer options

Quality of Action
Up-gradation of ideas and products enables us to position ourselves
at the right time and the right place in the market arena

Quality of People
Our team is made up of dedicated, performance-oriented,
well-informed individuals, with a proven track-record
Value-addition at every stage

Value-added Products
Constant Technology up-gradation and continuous research,
combined with proactive marketing are critical factors that have
contributed towards making us a supplier of quality products.

A Valuable Team
The invaluable support of a dedicated team of technocrats and
workforce, strengthens our resolve to achieve excellence in whatever
we do. It is this team that sets the momentum for our growth. Each and
every member of our team is considered a precious asset.

Value Creation for Customers

Superior business ethics … high quality products … proactive
marketing … competitive pricing … timely deliveries … these are just a
few of the factors that create value for our customers and contribute
towards our success in the marketplace. And our customers are happy
to come back to us – time and time again.

Industries that Value our Products

Oil and Gas

Refineries

Petroleum and Petrochemicals

Power / Boilers, Heat Exchangers & Condenser Applications

Fertilizers

Dairy and Sugar

Mechanical Tubing & Structural Applications

Automobile Applications

General Engineering

Fluid Conveyance Applications

Bearing Steel Tube Industry

 The JSL Corporate
Strategy:
To aim for holistic integration of its
product line and emerge as a
global performer, providing a
comprehensive range of products
in the category
Product Range

Outside Diameter Wall Thickness Outside Diameter Wall Thickness

Product Annual Capacity
(OD) (inch) (t) (inch) (D) (mm) (t) (mm)

Hot Finished Carbon /

Alloy Steel Seamless Tubes 1.00 to 8.00 0.13 to 1.25 33.40 to 219.10 3.38 to 32.00 80,000 MT
and Pipes
Seamless Casing and
Tubing conforming to API 2-3/8 to 7.00 0.15 to 0.75 60.30 to 177.80 4.00 to 19.05
5CT 100,000 MT
Seamless Drill Pipes
2-3/8 to 6-5/8 0.25 to 0.50 60.30 to 168.30 6.45 to 12.70
conforming to API 5DP
Cold Finished Carbon/
Alloy Steel Seamless Tubes 0.5 to 6.61 0.07 to 0.75 19.05 to 168.12 1.65 to 19.05 40,000 MT
and Pipes
Couplings for OCTG
2-3/8 to 7.00 60.30 to 177.80
Products
Anti Corrosion 3 LPE,3LPP/
2” to 14” as per DIN 30670, DIN 30678 & Customer’s specs 1 million SQM
FBE External coating.

Note: Make and Break, Hard Banding and Internal Plastic Coating are also available for Drill Pipes confirming to API 5DP
Specification on customer request.

SPECIFICATIONS CATERED

ASTM (A53, A519, A106, A335), SA (106,179,192,210,213), DIN (2391, 17175), IS (3601, 3074), BS (3059), NACE, SOUR
SERVICE etc.
API 5L (B, X42, X52, X56, X60, X65, PSL 1 & PSL 2),
API 5CT (J55, K55, N80, L80, L80 (13Cr), C90, C95, C110,T91,T95, P110, P110 HC, Q125),
API 5DP (E75, X95, G105, S135, SS105) Ss105

MAJOR STEEL GRADES

SAE 1019, 1518, 1035, 1040, 1541, 4130, 4140, 8620, EN19, ST 52,SUJ2/SAE52100/100Cr6,16MnCr5 & other Steel Grades
as per Customer requirement.
 The Winning Combination

With the unbeatable combination of Rotary

Hearth Furnace, Conical Type Piercer, PQF Mill,
Stretch Reducing Mill, Q&T Furnace, Upsetter,
Cold Draw Facility, Coating Facility, In house
Coupling Manufacturing and Balancing
Equipment, Jindal Saw Limited is perfectly
positioned to cater to the varied demands of
domestic as well as international markets.
Hot Finishing Process
ROTARY CONE TYPE
ROUNDS
The round billet is heated in a rotary hearth furnace and HEARTH FURNACE PIERCER
pierced by means of an internal piercing plug and a
two-roll conical type piercer. The shell is then rolled in a
STRETCH INDUCTION PQF
PQF Mill for wall thickness reduction and shell REDUCING MILL HEATER MILL
elongation. The Shell is reheated in an induction
furnace and rolled in a stretch-reducing mill to
STRAIGHTENING
decrease the outside diameter to the desired COOLING BED &
specifications. Finally, Pipe finishing is carried out via CUTTING

several processes - air-cooling on a cooling bed,

straightening, cutting and beveling. Finished seamless
HOT FINISHED NON DESTRUCTIVE
pipes undergo Hydrostatic testing, Non-Destructive TUBES
HYDRO TESTING
TESTING
Testing, as well as inspection for dimensional
irregularities.

Premium Quality Finishing Mill Rotary Hearth Furnace 24 Stand Stretch Reducing Mill

Cold Drawing Process

The hollow tube, after surface treatment, is drawn over a stationary plug and a die. The relative movement
between the stationary plug and the flowing tube material results in friction on the inner surface. As a
consequence, the tube is reduced with a high degree of accuracy, to the desired outer diameter and thickness.

The tube is now passed through an annealing furnace, straightened and cut to the required length. Quality
checks like Hydrostatic testing, Non-Destructive testing and Visual Inspection ensure that the product meets
with the required specifications, within strict tolerances.

HOT MILL TUBE COATING / SOAPING

COLD DRAW BENCH

HEAT TREATMENT STRAIGHTENING NDT / HYDRO

Cold Draw Bench

BUNDLING & DESPATCH CUTTING

Drill Pipe Process
Rolled Pipe ends are either External Upset or
Internal upset or Internal External upset and heat-
treated full length by the Quench and Temper
process to achieve uniform mechanical properties.

The heat-treated pipes are 100% nondestructively

inspected for possible longitudinal and transverse
defects and wall thickness. Q & T of Weld Zone Friction Welder

Magnetic particle inspection of the upset ends is

done to ensure that the upsets are free from defects.
GREEN PIPE UPSETTING HEAT TREATMENT STRAIGHTENING NDT INSPECTION
The OD & ID and face of the upsets are CNC
machined for a clean surface as part of pipe
preparation prior to welding.
POST WELD TOOL JOINT
Tools joints are attached to the drill pipe by friction OD & ID GRINDING
HEAT TREATMENT FRICTION WELDING
PIPE PREPARATION

welding to produce a high integrity solid state weld

connection between the tool joint and the upset drill
pipe tube.
ID COATING /
PROTECTIVE BUNDLING
HARDNESS, UT & MPI FINAL INSPECTION HARD BANDING
COATING & DESPATCH
Hard Banding and ID coating facilities are also (OPTIONAL)

available on customer request.

Upsetter Tuboscope EMI & UT MPI Machine

HOT MILL TUBE HEAT TREATMENT STRAIGHTENING NON DESTRUCTIVE

TESTING

OCTG Manufacturing Process UPSETTING IN

CASE OF TUBING
HYDROTESTING

Rolled pipes are heat treated in a Q&T furnace to COUPLING THREAD INSPECTION IN THREADING
achieve properties that conform to API grades. In APPLICATOR API STD. GAUGE (BOTH SIDES)

the case of tubing, the ends are upsetted. The pipes

are straightened and subjected to EMI & UT and
Hydrostatic testing. Subsequently, threads are cut VISUAL INSPECTION & DRIFT TEST
and couplers are power-tightened.

AUTOMATIC BUNDLING STENCILING &

& DESPATCH PROTECTIVE COATING

Q&T Furnace MAC EMI & UT PMC Threading Machine

Anti-Corrosion Coating Process
The external coating 3LPE, 3LPP, & FBE is a multilayer anti-
corrosion coating comprising of a high performance fusion
bonded epoxy (FBE) layer, followed by a copolymer adhesive
and an outer layer of polyethylene. This coating ensures that
our tubes are tough and durable, especially in sour conditions.

Coating Facility

BARE PIPE SHOT BLASTING VISUAL INSPECTION

WATER ADHESIVE EPOXY INDUCTION

QUENCHING & HDPE COATING COATING HEATING

END FINISHING HOLIDAY TESTING FINAL INSPECTION

DESPATCH STENCILLING / BUNDLING

Coupling Manufacturing Process

Tubes referred to as coupling stock are cut into blanks by CUTTING OD & ID
COUPLING STOCK
Automated Band Saws. The blanks are transported to the CNC INTO BLANKS MACHINING

machines, where OD & ID machining and threads are cut to

API thread specification with stringent tolerances and
INLINE
meticulous precision. The couplings are subjected to visual MPI
INSPECTION
THREAD CUTTING

inspections under UV light for longitudinal and transverse

flaws.
AUTOMATIC
PHOSPHATING PAINTING
STAMPING
Subsequently, the couplings are phosphated with
Manganese Phosphate Layer which provides protection
against corrosion and improves galling resistance. Finally the FINISHED
OILING
couplings are colour coded as per the specification and oiled COUPLING

on the inside surface.

CNC Machines MPI Machine Couplings

 ISO 9001 ISO 14001 BSOHSASS 18001

API5L API5CT API5DP

PED IBR
Quality Assurance & Approvals

An Eye for Perfection

Commitment to Customers, Flexibility in Manufacturing and Total Quality Management
are principles which have enabled JINDAL SAW LIMITED to deliver value to our
customers. Stringent system-based quality control is implemented at each stage of
production. Our service standards focus on customer requirements and we strive for the
highest user satisfaction.

1) ISO 9001-2008, ISO-14001 : 2004, BS OHSASS 18001 : 2007 certification by TUV

NORD CERT GmbH

2) API 5L, API 5CT & API 5DP

3) PED Certification by DNV

4) Well Known Tube/Pipe maker under Indian Boiler Regulation.

Leading Third Party Inspecting authorities like EIL, LRIS, Bureau Veritas, DNV, TUV etc.
regularly visit our manufacturing facilities for inspection while fulfilling various customer
orders.

Quality is our Mantra

All our products are submitted to strict quality checks at every stage of production.

Raw Material:
All incoming material is inspected in detail for mechanical and metallurgical defects.

Macro Etch test:

This is used to study the macro structure of raw material.

Metallography:
The micro structure of the material is examined in careful detail.

Chemical Testing:
The chemical properties of the steel are analysed using a 'Spectrolab'.

Mechanical Testing:
The material is also tested for its mechanical properties to check for tensile strength,
hardness, resilience to impact, bending, flaring, flattening and Flange testing.

Hydrostatic Testing:
Hydrostatic testing is conducted as per API, ASTM, DIN, IS or equivalent standards.

Eddy Current Testing:

Eddy Current testing is carried out to detect surface irregularities on the entire length of
the tube. This is done using the Circograph and Technofour machines.

EMI & Ultrasonic Testing:

The Tuboscope, MAC Electromagnetic Induction and Ultrasonic flaw detection
equipment are used to verify the external and internal surface quality of the tubes and
wall measurements along their length. This ascertains the soundness of the material in
accordance with API 5CT, 5DP, 5L norms while meeting national and international
specifications.

Magnetic Particle Inspection:

MPI is conducted to detect for outer and inner surface imperfections in couplings, as per
ASTM & API standards.

SSC / HIC Test as per API 5L / 5CT / NACE requirements.

Our Commitment to the Environment
and the Community

At Jindal Saw, we hold ourselves responsible for protecting

the environment and the communities that live and work
within our surroundings.

We believe in finding a harmonious balance between the

demands made by industrialization and ethics concerning
the environment.

Strict environment management systems for air, water and

waste treatment in and around our workplace ensure that
we live and work in harmony with the eco-system.

We are committed to improving the lives of the people who

work with us and the communities who live around us.
While we stress on continuous technical training for our
workforce, we strive to ensure that the social needs of the
community are always given due importance - an ever-
evolving process, which we are happy to consider our
corporate responsibility.

The Jindal Advantage

• One of the largest pipe manufacturing companies
with a strong international presence
• Established track record
• Prestigious accreditations
• State-of-the-art manufacturing facilities and testing
equipment, technologically at par with the best
seamless mills, globally
• Raw material, in the form of Vacuum Degassed
Clean Steel Billets, is sourced primarily from Group
Companies ensuring consistent quality and timely
deliveries
• Skilled and experienced manpower
• Long-term relationships forged with leading
companies across the world
 This is Jindal Saw Limited.

A company that is steadfastly committed to its

customers, its people, its community and to its
environment.
 Jindal Saw Ltd. (Seamless Tubes Division)
Works & Marketing Office
A-59/60, MIDC, Malegaon, Sinnar, Dist: Nashik - 422 113 Maharashtra, INDIA
Phone: +91-2551-227200 Fax: +91-2551-230967
Email: seamless.export@jindalsaw.com / marketing.nashik@jindalsaw.com
Website: www.jindalsaw.com

Jindal Saw USA LLC

Works Office
1411 South FM 565, Baytown, TX 77523-USA
Phone: +1 281-573-2300 Fax: +1 281-575-3838
Marketing Office
1401 McKinney Street, Suite 300, 5 Houston Center, Houston, TX 77010-USA
Phone: 713-650-9000 Fax: 713-650-9001