AEROSPACE AMS5548 REV.
P
MATERIAL
Issued 1958-01
SPECIFICATION Revised 2007-05
Reaffirmed 2012-10
Superseding AMS5548N
Steel, Corrosion and Heat-Resistant, Sheet and Strip
16.5Cr - 4.5Ni - 2.9Mo - 0.10N
1850 to 1975 °F (1010 to 1079 °C) Annealed
(Composition similar to UNS S35000)
RATIONALE
AMS5548P has been reaffirmed to comply with the SAE five-year review policy.
__________________________________________________________________________________________________________________________________________
SAE Technical Standards Board Rules provide that: “This report is published by SAE to advance the state of technical and engineering sciences. The use of this report is
entirely voluntary, and its applicability and suitability for any particular use, including any patent infringement arising therefrom, is the sole responsibility of the user.”
SAE reviews each technical report at least every five years at which time it may be reaffirmed, revised, or cancelled. SAE invites your written comments and suggestions.
Copyright © 2012 SAE International
All rights reserved. No part of this publication may be reproduced, stored in a retrieval system or transmitted, in any form or by any means, electronic, mechanical, photocopying,
recording, or otherwise, without the prior written permission of SAE.
TO PLACE A DOCUMENT ORDER: Tel: 877-606-7323 (inside USA and Canada) SAE values your input. To provide feedback
Tel: +1 724-776-4970 (outside USA) on this Technical Report, please visit
Fax: 724-776-0790 http://www.sae.org/technical/standards/AMS5548P
Email: [email protected]
SAE WEB ADDRESS: http://www.sae.org
SAE AMS5548P Page 2 of 6
SAE AMS5548P Page 3 of 6
SAE AMS5548P Page 4 of 6
SAE AMS5548P Page 5 of 6
SAE AMS5548P Page 6 of 6
