Estimate

Name of the Work : Name of the work : Improving

Infrastructure Facilities to
Govt.Polytechnic at Srikakulam
(V&M) in Srikakulam District
Under Nadu - Nedu

Estimate cost : 380.00 Lakhs

OFFICE OF THE EXECUTIVE ENGINEER,

APEWIDC ,
SRIKAKULAM.
Name of the work : Improving Infrastructure Facilities to Govt.Polytechnic at
Srikakulam (V&M) in Srikakulam District
Under Nadu - Nedu

General Abstract
s.no Description Amount
1 Toilets (2 Blocks with 10units) 2316653
1 Drinking water 996057
2 Electrification 1710449
3 Repairs 2126169
4 Furniture 20876367
5 Paintings 2908656
6 Smart Boards 102000
31036350

8 Provision towards GST 12% 3724362

9 Provision towards Engineering Establishment Charge@ 7% 2172545

10 Provision for seigniorage charges @ 1% 310364

11 Provision for Quality control charges @ 0.50% 155182

12 Provision towards NAC 0.1% 31036

13 Provision towards Iron works : Grills to ventilators & Safety grills 300000

14 Provision for Unforcene items 270162

TOTAL 38000000

Assistant Engineer Dy Executive Engineer Executive Engineer

APEWIDC, Srikakulam APEWIDC, Srikakulam APEWIDC, Srikakulam
 SPECIFICATION REPORT

Name of the work : Improving Infrastructure Facilities to Govt.Polytechnic

at Srikakulam (V&M) in Srikakulam District
Under Nadu - Nedu

Est. Cost : 380.00 Lakhs.

The estimate for the work " Improving Infrastructure Facilities to

Govt.Polytechnic at Srikakul;am (V&M) in Srikakulam District
Under Nadu - Nedu". Hence, the estimate was prepared for Rs. 156.00 lakhs as per
instructed by the Executive Engineer ,APEWIDC,Srikakulam . Accordingly the detailed
estimate is prepared with the following specification & LS Provisions.

1 Drinking water facilities

2 Electrification repairs

3 Major & Minor Repairs

4 Providing Furniture to Students,Staff & Lab Equipment

5 Paintings

6 Smart Boards

AMENITIES:

1) Sub-Estimate is prepared for Water supply and Sanitary Arrangements as per the
requirements based on approved plan.
General Items :-

The General Items like P.S. Charges @ 7%, GST @12%, Seignerage charges @ 1%,
Q.C. charges @ 0.50%, NAC charges @ 0.1%, Provision for Tender publication charges,
Provision for power connection charges, Provision for price adjusement of Cement & Steel
& Provision for Unforseen Items are also provide in this estimate.
Thus the estimate is prepared duly adopting the rates of SSR 2019-20 and the
work will be carried out as per the standard spectifications of APDSS.

Assistant Engineer Dy. Executive Engineer Executive Engineer

APEWIDC, Srikakulam APEWIDC, Srikakulam APEWIDC,Srikakulam
 DETAIL CUM ABSTRACT ESTIMATE TOILET BLOCK
Name of the work : Improving Infrastructure Facilities to Govt.Polytechnic at Srikakulam (V&M) in Srikakulam
District
Under Nadu - Nedu

SNo Description of work No L B D Qty Rate Per Amount

Earth work excavation and depositing on bank with initial lead of 10m and
initial lift of 3m in Loamy & Clayey Soils like BC Soils, Red Earth & Ordinary
Gravelly Soils ( SS 20-B) including all operational incidental labour charges
such as shoring, strutting, sheeting, planking and dewatering including cost of
1 hire charges of T & P, labour charges etc., complete for finished item of work
including seignerage charges excluding dewatering charges etc., complete for
Foundation of Building.(APSS No. 308)

For Columns 1 6 1.30 1.30 1.50 15.21

For Basement 1 2 6.00 0.60 0.60 4.32
For Septic tank 1 1 5.00 3.00 1.80 27.00
For Steps 1 1 1.80 0.45 0.30 0.24
For ramp 1 2 10.00 0.45 0.45 4.05
1 1 3.00 0.45 0.45 0.61
51.43 191.10 1 cum 9828

Plain Cement Concrete corresponding to M5 grade as per IS 456 equivalent to

(1:4:8) proportion nominal mix (cement: fine aggregate: Coarse aggregate)
using 40mm size Hard Blasted Granite (IS383, 1970) metal from approved
quarry including cost and conveyance of all materials like cement, sand, coarse
2 aggregate, water etc. to site, including seigniorage charges, sales & other taxes
on all materials, all operational, incidental, and labour charges such as mixing,
laying and ramming concrete in layers in position not exceeding 15cm,
finishing top surface, curing concrete, etc., complete for finished item of work
for Foundations and Flooring Bed (APSS No. 402)
For Columns 1 6 1.30 1.30 0.10 1.01
0.10
1.11 3179.70 1 cum 3529
Plain Cement Concrete corresponding to M5 grade as per IS 456 equivalent to
(1:5:10) proportion nominal mix (cement: fine aggregate: Coarse aggregate)
using 40mm size Hard Blasted Granite (IS383, 1970) metal from approved
quarry including cost and conveyance of all materials like cement, sand, coarse
3 aggregate, water etc. to site, including seigniorage charges, sales & other taxes
on all materials, all operational, incidental, and labour charges such as mixing,
laying and ramming concrete in layers in position not exceeding 15cm,
finishing top surface, curing concrete, etc., complete for finished item of work
for Foundations and Flooring Bed (APSS No. 402)
For Basement 1 2 6.00 0.60 0.10 0.72
1 2 3.00 0.60 0.10 0.36
For Septic tank 1 1 5.00 3.00 0.15 2.25
For Steps 1 1 1.80 0.45 0.10 0.08
For ramp 1 1 6.00 0.45 0.08 0.22
1 1 3.00 0.45 0.08 0.11
1 1 6.00 3.12 0.08 1.50
 1 1 6.00 1.80 0.08 0.86
0.20
6.30 3040.36 1 cum 19154

Brick Masonry in superstructure with CM (1:6) prop: using Fly ASH Bricks of
size 290x225x140mm with compressive of 50 Kgs / Sqcm from approved
source including cost and conveyance of all materials like cement, sand, fly ash
bricks, water etc., to site, including seigniorage charges, sales & other taxes on
4
all materials, all operational, incidental and labour charges such as mixing
cement mortar, constructing masonry, scaffolding charges, lift charges, curing,
etc., complete for finished item of work. (APSS No. 501 & 504).

Allround 1 1 18.00 0.45 0.75 6.08

Deduction columns -1 6 0.23 0.23 0.75 -0.24
For ramp 1 1 6.00 0.30 0.75 1.35
1 2 1.80 0.30 0.75 0.81
1 1 1.80 0.30 0.15 0.08
1 1 1.80 0.30 0.60 0.32
0.20
8.60 5098.05 1 cum 43843
Random Rubble stone masonry, in CM (1:8) prop: (Cement: Sand) using Hard
blasted Granite stones from approved quarry including cost and conveyance of
all materials like Granite stones, cement, sand, water, etc., to site including
seigniorage charges, sales & other taxes on all materials, all operational,
5
incidental, and labour charges such as cutting stones to required size and shape,
mixing of cement mortar, constructing masonry, curing etc., complete for
finished item of work for foundation and basement (APSS No. 601 & 615)

For septic tank 1 2 5.00 0.60 1.00 6.00

1 2 5.00 0.45 0.90 4.05
1 2 2.50 0.60 1.00 3.00
1 2 2.50 0.45 0.90 2.03
0.42
15.50 2959.15 1 cum 45867

Filling with Gravel in trenches, sides of foundations and basement with initial
lead in layers not exceeding 15cm thick, consolidating each deposited layer by
watering and ramming including cost and conveyence of water to the work site
6
and all operational, incidental, labour charges, seignorage charges, hire charges
of T & P etc., complete for finished item of work. (APSS NO. 309 & 310)

Allround 1 1 6.00 3.12 0.90 16.85

Ramp 1 1 6.00 1.80 0.45 4.86
20.30
42.01 342.05 1 cum 14370
 Brick masonry for panel walls in superstructure with CM (1:8) prop: (Cement :
Sand) using common burnt clay bricks of class as per Table- I of IS:1077-1992,
Non- Modular or traditional size 23 x 11 x 7 cms from approved source having
minimum crushing strength of 40 Kg/Sqcm. including cost and conveyance of
7 all materials like cement, screened sand, bricks, water etc., to site, labour
charges, like mixing cement mortar, scaffolding charges, constructing masonry,
lift charges, curing, etc.,and overheads & contractors profit complete for
finished item of work. (APSS No. 501 & 504).
Alround 1 1 18.00 0.23 2.45 10.14
deduct open door 1 1 1.20 0.23 2.13 -0.59
1 4 0.75 0.12 2.13 -0.77
Deduct grills 1 4 1.20 0.23 0.30 -0.33
for partition long walls 1 2 3.12 0.23 2.75 3.95
for partitions walls 1 4 2.70 0.120 2.45 3.18
0.42
16.00 5428.60 1 cum 86858

Vibrated Reinforced Cement Concrete M 25 Design Mix ( by weigh

batching ) using 20mm size (SS5) hard blasted granite machine crushed
graded metal (Coarse aggregate) from approved quarry, using a minimum
quantity of 350 kgs. of cement per 1 cum of concreteincluding cost and
conveyance of all materials like cement, fine aggregate (Sand), coarse
aggregate, water etc., to site and cost of seigniorage charges on all materials
8
including centering using Cashewrina Ballies and Wooden runners & staging
including all bracings, cross members etc., shuttering , machine mixing, laying
concrete, vibrating,lift charges, curing etc., complete but excluding cost of steel
and it’s fabrication charges for finished item of work for foundation, plinth,
pedastals (below plinth)(APSS No. 402 & 403)

a For Footings
For Toilet block 1 6 1.15 1.15 0.25 1.98
1.98 7899.45 1 cum 15641
b For Pedestals
For Columns 1 6 0.38 0.38 0.60 0.52
0.52 8405.70 1 cum 4371
c For columns
For Toilets 1 6 0.23 0.23 0.90 0.29
1 6 0.23 0.23 2.45 0.78
0.29 9745.70 1 cum 2826
d LINTELS: (RCC) .
for Doors 1 1 1.60 0.23 0.15 0.06
1 4 1.20 0.23 0.15 0.17
0.23 9665.20 1 cum 2223

e Plinth Beams : (RCC)

1 2 6.00 0.23 0.30 0.83

1 3 3.12 0.23 0.30 0.65
0.20
 1.68 10113.95 1 cum 16991
f Roof Beams : (RCC)
1 2 6.00 0.23 0.23 0.63
1 3 3.12 0.23 0.23 0.50
0.15
1.28 8155.45 1 cum 10439

g Roof slab 115 mm thick

Fortoilet 1 1 6.60 4.20 - 27.72

Septic tank 1 1 5.00 3.00 - 15.00
1.20
43.92 932.50 1 SQM 40955

h For 50mm thick plates

1 2 1.20 1.00 - 2.40

2.40 785.05 1 SQM 1884

Providing impervious coat over RCC roof slab to required slopes with CM (1:3)
prop. 20mm thick (average) mixed with water proofing compound
manufactured by reputed manufacturers as approved by Engineer-in-charge at
1Kg/bag of cement, laid over roof slab when it is green, finished smooth with a
9 floating coat of neat cement and thread lining at regular intervals of
45cmx45cm including cost and conveyance of all materials like cement, sand,
water proofing compound, water etc., to site, seigniorage charges, sales &
other taxes on all materials, all operational, incidental and labour charges such
as mixing mortar, laying, rounding off at junctions of wall and slab, rendering
Fortoilet
smooth with thread lining, curing,1 lift charges,
1 6.60 4.20
etc., complete - finished
for 27.72
item
Septic tank
of work (APSS No. 901 & 903). 1 1 5.00 3.00 - 15.00
0.28
43.00 395.40 1 SQM 17002

Ornamental Plastering 12mm thick in two coats with base coat of 8mm thick in
CM (1:5) and top coat of 4mm thick in CM (1:3) dubara sponge finish
including cost and conveyance of all materials like cement, sand, water etc., to
site, seigniorage charges, sales & other taxes on all materials,all operational,
10 incidental and labour charges such as mixing mortar, scaffolding charges, lift
charges, including cutting of Grooves wherever necessary as directed by
Engineer - in - charge, finishing, curing, etc., complete for Even Surfaces of
Wall for finished item of work. (APSS 901,903 & 904)

For Ceiling 1 1 6.00 - 3.90 23.40

out side 2 1 3.12 - 0.46 2.87
1 1 3.60 - 3.00 10.80
2.93
40.00 383.29 1 SQM 15332
 Plastering 12mm thick in two coats with base coat of 8mm thick in CM (1:6)
and top coat of 4mm thick in CM (1:4) dubara sponge finish including cost and
conveyance of all materials like cement, sand, water etc., to site, seigniorage
charges, sales & other taxes on all materials,all operational, incidental and
11 labour charges such as mixing mortar, scaffolding charges, lift charges,
including cutting of Grooves wherever necessary as directed by Engineer - in -
charge, finishing, curing, etc., complete for Even Surfaces of Wall for
finished item of work. (APSS 901,903 & 904)

Inside 1 2 6.00 - 3.00 36.00

for inside Long Partition wall 1 2 6.00 - 3.00 36.00
For Cross walls 1 1 8.40 - 3.00 25.20
1 3 5.20 3.00 46.80
Deduction ventilators -1 4 1.50 0.30 -1.80
-1 2 1.20 2.13 -5.11
Deduct for Doors -1 4 0.75 - 2.00 -6.00
8.91
140.00 367.60 1 SQM 51464

Plastering 20mm thick in two coats with base coat of 16mm thick in CM (1:6)
and top coat of 4mm thick in CM (1:4) dubara sponge finish including cost and
conveyance of all materials like cement, sand, water etc., to site, seigniorage
charges, sales & other taxes on all materials, all operational, incidental and
12 labour charges such as mixing mortar,scaffolding charges, lift charges,
finishing,including cutting of Grooves wherever necessary as directed by
Engineer - in - charge, curing, etc., complete for Uneven Surfaces of Brick
Wall for finished item of work. (APSS 901,903 & 904)

Alround inside 1 1 18.20 - 3.00 54.60

Basement alround outside 1 1 18.20 - 0.60 10.92
1 1 10.00 0.90 9.00
1 1 10.00 1.80 18.00
For steps 1 10 1.50 0.45 6.75
0.73
100.00 379.65 1 SQM 37965
 Flooring with Non-skid red or white full body Ceramic floor tiles of size 300 x
300 mm and thickness between 7-8 mm 1st quality conforming to IS:13711,
IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and
designs as approved by Engineer-in-charge, set over base coat of cement
13 mortar (1:8), 12mm thick using screened sand over CC bed already laid or RCC
roof slab, including neat cement slurry of honey like consistency spread @ 3.3
Kgs per sqm & jointed neatly with white cement paste to full depth mixed with
pigment of matching shade, including cost of all materials like cement,
screened sand , water and tiles etc., and overheads & contractors profit
Toilet
complete 1 (APSS
for finished item of work. 1 No.701
6.00 & 3.12
707) - 18.72
1 1 2.40 1.80 - 4.32
Passage 1 1 6.00 1.80 - 10.80
1 2 1.80 0.45 1.62
4.54
40.00 791.40 1 sqm 31656

Providing dadooing to walls with sglazed full body porcelain wall tiles of size
300 x 600 mm with any type of design texture such as marble finish, wooden,
bamboo, stone finishes etc., scratch less, stain free and thickness between 6-8
mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of
14 any colour and finish in all shades and designs with borders and design as per
the approved pattern as approved by Engineer-in-Charge set over base coat of
CM(1:5) 12 mm thick using screened sand with cement slurry of honey like
consistency spread at the rate of 3.30 kgs per sqm and jointing with white
cement paste mixed with pigment of matching shade to full depth, including
cost
Toiletofalround
all materials like tiles, cement,
1 1 sand18.00
and water- etc., 2.40
and overheads
43.20 &
contractors profit complete for finished item of work.
1 4 2.60 2.40 24.96
1 1 13.00 2.40 31.20
Deduct Doors 1 8 0.75 - 2.15 -12.90
deduct for Main door 1 2 1.20 - 2.15 -5.16
3.70
85.00 470.05 1 sqm 39954
Supplying, fitting and placing MS grilled door, windows, gate including
fabrication charges and all incidental charges etc, cost and conveyance of all
15 materials and all labour charges etc., complete. (make of materials - TATA,
Jindal, Sail, Visakha)

For toilet block 1 1 100.00

100.00 70.60 1Kg 7060

Providing and fixing factory made solid Wood Polymer Composite (WPC)
single extruded Door Frame section of size 45x75 MM . The two Vertical
members are to be joined together with the horizontal member using 8x50 MM
long MS Star full thread screws to be used with reverse forward speed control
16 hand drilling machine. The ready/assembled door frame is fixed to the wall
using hold fast or bolt fasteners. A minimum of 4 No.s of screws to be provided
for each vertical member & minimum 2no.s for horizontal member with
encapsulation of 8MM rigid layer on all the six surfaces. The door frame will
have a rebat of 32MM
 For toilet block
1 4 6.00 24.00
1 1 7.00 7.00

31.00 506.00 1Rmt 15686

Providing and fixing 28 -30 MM thick solid Wood Polymer Composite(WPC)
single extruded door shutter with 3MM top and bottom rigid layer with an
overall density of 750kg/Cum. It will be fixed to the frame using 3 inch /4 inch
17
hinges. A minimum of 4 hinges will be required for fixing the door with the
frame BMT-N.88

For toilet block

1 4 0.75 1.80 5.40
1 1 1.20 2.15 2.58
7.98 3030.00 1 SQM 24179

Providing and applying Wall putty of White Cement or Polymer or Cement

based of average 1 to 2 mm thickness over plastered surface to prepare the
surface even and smooth after thoroughly brushing the surface to remove all
dirt and remains of loose powdered materials, applying emery paper, Sand the
19 surface, clean & wipe off loose dust, applying knifing paste filler by putty knife
/ muslin pad, air dry for 2 - 3 hrs, sand with 180 and 320 No., emery paper for
the surface preparation including cost and conveyance of all materials to work
site and all operational, incidental, labour charges, over heads and contractors
profit etc., complete for finished item of work in all floors for Internal walls

For toilet block

1 1 6.00 3.60 21.60
1 2 3.00 2.00 12.00
33.60 168.30 1 SQM 5655
Painting to New walls with two coats of acrylic emulsion paint having VOC
(Volatile Organic Compound) content less than 50 grams/liter of superior
quality of approved brand and shade over base coat of cement primer grade -I
making three coats in all to give an even shade after thoroughly brushing the
20 surface to remove all loose powdered materials, including cost and conveyance
of all materials, including cost and conveyance of all materials, cost of brushes,
water to site, etc., sales & other taxes, all operational, incidental and labour
charges such as scaffolding charges, lift charges, curing etc., complete for
finished item of work in all floors for Walls.(APSS No. 911) in Ground Floor
INTERNAL Make : Asian, Burger, Nerolac
For toilet block For internal
1 1 6.00 3.50 21.00
1 2 3.00 2.00 12.00

10.20
43.20 147.45 1 SQM 6370
 Painting to New walls with two coats of acrylic emulsion paint weather proof
waterbased, modified acrylic with silicon additives exterior grade having VOC
(Volatile Organic Compound ) content less than 50 grams/ liter of superior
quality of approved brand and shade over base coat of cement primer grade -I
21 making three coats in all to give an even shade after thoroughly brushing the
surface to remove all loose powdered materials, including cost and conveyance
of all materials, including cost and conveyance of all materials, cost of brushes,
water to site, etc., sales & other taxes, all operational, incidental and labour
charges such as scaffolding charges, lift charges, curing etc., complete for
finished
For toiletitem of work in all floors for Walls.(APSS No. 911) in Ground Floor
block
EXTERNAL 1 1 30.00 4.00 120.00
1 1 3.00 2.40 7.20

23.60
150.80 200.70 1 SQM 30266
Painting to new Iron work with Two coats of ready mixed synthetic enamel
paint first quality all shades to give an even shade over base coat of Red Oxide
primer thouroughly brushing the surface to remove all remains including cost
22 and conveyance of all materials to site, all operational, incidental and labour
charges etc., complete for finished item of work.

For Toilet block 30.00

30.00 95.50 1 SQM 2865
Providing ornamental single boarder 50mm wide 20mm thick in CM (1:3)
23 including cost and conveyance of all materials, labour charges etc. complete for
parrapet wall for all floors

For Toilet block

100.00
100.00 55.90 1 Rmt 5590
Providing 16 to 18mm thick high polished granite stone slabs other than black
and regular colours (i.e. of shades like paradiso / bala flower / copper silk / laka
red / lavender blue) with borders and design as per the pattern approved by the
Engineer-in-Charge of length not less than 2.43 mts set over base coat of
cement mortar (1:5) , 12mm thick using screened sand over CC bed already laid
or RCC roof slab including neat grey cement slurry of honey like consistency
24 spread @ 3.3 Kg per sqm and jointed neatly with white cement paste mixed
with pigment of matching shade to full depth including cost and conveyance of
all materials like cement , sand , water , granite slabs etc., to work site and all
operational, incidental labour & lift charges, half rounding the edges of treads ,
polishing charges, cost of base coat and overheads & contractors profit
complete for finished item of work for treads and risers (S.S.701 & special)

For toilet block wash basin 1 1 1.50 1.00 1.50

1.50 4409.00 1 SQM 6614
 Providing High Yield Strength Deformed (HYSD) steel bars (Fe 415 grade as
per IS 1786-1985) of 8mm to 40mm diameters, cutting, bending, to required
sizes and shapes placing in position with cover blocks of approved size and
binding wire of 20SWG, forming grills for reinforcement work as per approved
25 Designs and drawings including cost and conveyance of bars from approved
sources to site of work, including cost and conveyance of binding wire, cover
blocks, chairs, overlaps, spacers, dowels, wastage etc., and all operational,
incidental, and labour charges such as cutting, bending, placing in position,
tying etc., and sales & other taxes,on cost of all materials complete for finished
1.00
item of work (APSS No.126) in all floors.
1.00 49348 1MT 49348
Supplying and laying, filling, jointing and testing SWG SP-1 pipes of ISI make
confirming to IS 1651 & 4127 1st quality with air tight Cement joints in CM
(1.5:1)prop. including excavation of trenches and socket pits in any soil
26 (except rock requiring blasting) and refilling with watering and tamping
including cost and conveyance of all materials to site and all labour charges for
finished item of work (APSS NO 1301 & 1318)

101.60 mm dia SWG pipe

upto 3' depth 1 1 40.00 - - 20.00
20.00 155.30 1 EACH 3106
For 90mm dia pipe 1 1 10.00 - - 10.00
10.00 129.90 1 EACH 1299
For 160mm dia pipe 1 1 20.00 - - 20.00
20.00 369.65 1 EACH 7393
Constructing 904.0 mm 3 dia brick masonry inspection chamber as per IS -
4111: Part-1:1986 with cement mortar (1:6) prop using 2nd Class Clay Bricks
of 225 mm thick from approved source having a minimum crushing strength of
27 5 N/sq.mm including plastering with cement mortar 1:3 prop; ½ thick both
inside and outside fitted with 20 dia RCC manhole covers and frames including
excavating pits up to a depth of 904 mm (3-0) in all sorts of soils (exculding
rock) and laying cement conrete (1:4:8) 150 mm thick using 40 mm HBG
Metal and P.C.C. 1:2:4 benching and channel 100 mm thick as per Standard
For toilets and including cost 1and conveyance
specification 1 - of all- materials- like cement,
1.00
sand, bricks, water etc., to site, cost of seigniorage charges on all materials1.00and 6269.30 1 each 6269
all
Constructing 457.2mm x 457.2mm ( 1'-6" x 1'-6") brick in CM (1:6)mortar,
incidental and operational, labour charges like mixing cement prop.
constructing masonry,
Masonry inspection lift charges,
chamber curing etc.,
upto 914.4mm complete
(3'-0") for with
and fitted finished
lightitem of
weight
work as per Standard specification.
457.2mm x 457.2mm ( 1'-6" x 1'-6") C.I. frame and cover of 20Kg. including
28
cost and conveyance of all materials to site, all labour charges, sales and other
taxes on all materials etc., complete for finished item of work.

1 3 - - -3.00
3.00 3678.85 1 EACH 11037
Supplying & fixing Ashirvad/Astral flow guard for equivalent CPVC Pipes
with fittings in ground or on wall including cost of tees, elbows, bends,
reducers, couplings, running joints, union flanges, unions etc. with necessary
29 excavation in all types of soils except rock requiring blasting, refilling,
chiselling masonry walls and making good the walls & floors to the original
surface and fixing MS clamps on TW blocks on walls including cost and
conveyance of all materials and labour charges complete for finished item of
work.
22.20 mm dia CPVC SDR
13.50 1 1 20.00 - - 20.00
 20.00 96.60 1 Rm 1932

28.60 mm dia CPVC SDR

13.50 1 1 30.00 - - 30.00
30.00 139.75 1 Rm 4193

34.9 mm dia CPVC SDR

13.50 1 1 30.00 - - 30.00
30.00 219.30 1 Rm 6579
Supplying and fixing 580mm x 440mm long Orissa pan white glazed Water
Closet (C0116 thrift pan parryware) 1st quality ISI marked confirming to
IS:2556-Part-3-1981 with "P" or "S" trap, ISI marked and providing masonry
seat, CC squatting plate and 10 litres capacity single flush PVC low level
30 cistern with internal components fixed on 2 Nos. of teak wood blocks of size
76.20mm x 101.60mm using required size of nails, screws as approved by
Engineer-in-charge, angle stop cock 12.70mm dia. first quality Indian make
heavy duty, 12.70mm PVC connection with brass union nuts CP coated ,
31.75mm brass plumber union, P trap or S trap of Indian W.C. shall be encased
on CC (1:2:4) 150mm alround well above the joint to stop leakage at the joint
For toilets 1 3 - - - 3.00
etc., complete including cost and conveyance of all materials to site, cost of CC
3.00
bed, labour charges, overheads & contractors profit etc., complete for finished 3330.10 1 each 9990
Supplying and
item of work. fixing European Water Closet (RAKGEM)of 1st quality
conforming to IS:2556-Part-2-1973 of white glazed with 'S' trap,supplying and
fixing best Indian make plastic seat and lid for European water closets with
rubber or plastic Buffers as per IS 2548-1996 and 10 litres capacity single flush
31 PVC low level cistern with internal components and fixed using required size
of nails and screws, angle stop cock 12.70mm dia. first quality Indian make
heavy duty, 12mm PVC connections with brass union nuts CP coated including
cost and conveyance of all materials to site, overheads & contractors profit etc.,
complete for finished item of work for all floors.
For toilets 1 1 - - - 1.00
1.00 4896.8 1 each 4897
Supply & Fixing of Jaquar make chrome plated Metro pole flush valve
concealed type with cover plate 40mm size including all cost and conveyance
31 of all materials to site, all labour charges etc., complete for finished item of
work.

For toilets 1 1 - - - 1.00

1.00 5394.5 1 each
Supply & fixing of Jaquar make Sensotronic concealed type flushing valve for
32 urinal complete set with installation box with control cock, Chrome plated with
7 years warranty BMW-I.200

For toilets 1 1 - - - 1.00

1.00 12525.0 1 each
Supplying and fixing NP bib taps (CQT 23047)of size 12.70mm dia of Indian
make heavy duty (short body) as approved by the Engineer-In-Charge
34 including cost and conveyance of all materials, labour charges , overheads &
contractors profit complete for finished item of work in all floors.

For toilets 1 16 - - - 16.00

 16.00 621.49 1 each 9944
Manufacture, Supply and Delivery of Unplasticised PVCs Pipes for potable
water supplies conforming to IS : 4985/2000 (3rd revision) with bell ends
35 (Socket) as per specification in light Grey/Natural Ivory Grey/ Any other Color
(except White) inclusive of transportation to the sub-divisional stores anywhere
in AP excluding all taxes.
For toilets 1 10 - - - 10.00
10.00 262.45 1 each 2625
Supplying and fixing of 4" (101.6mm) multi floor trap with jali - UPVC/SWR
pipe fittings as per site requirements with standard practice for all floors
36 including cost and conveyance of all materials to site, labour charges ,
overheads & contractors profit etc., complete for finished item of work.

For toilets 1 10 - - - 10.00

10.00 122.00 1 each 1220
Supplying and fixing Indian make over Counter Wash Hand Basin (JAQUAR
COMPANY (FLS - WHT-2105))1st quality conforming to IS:2556-Part-
4:1972 of size 550mm x 400mm with 32 mm nominal size C.P. Fitting with
parallel pipe thread conforming to IS:2963-1979 and fitted with 15 mm
37 nominal bore Chromium Plated Pillar Tap of 1st quality Indian make heavy
duty complete with standard CI brackets including wooden blocks ,1
No.12.70mm PVC connection with brass union nuts CP coated , angle stop
cock 12.70mm dia. first quality Indian make heavy duty, 31.75mm dia. PVC
flexible waste pipe 914.4mm length of 1st quality including cost and
conveyance of all materials to site, labour charges , overheads & contractors
For toilets 1 2 - - - 2.00
profit for finished item of work
2.00 3494.90 1 each 6990
Supplying and fixing NP soap dish heavy type of approved make ISI quality
with NP screws etc., complete including cost and conveyance of all materials,
38 labour charges for fixing , overheads & contractors profit for finished item of
work in all floors
For Bathrooms 1 2 - - - 2.00
2.00 236.35 1 each 473
Supplying and fixing of 25.4mm dia , 609.6mm long aluminium anodized
towel rods with brackets and aluminium screws including cost and conveyance
39 of all materials, labour charges , overheads & contractors profit for finished
item of work.

1 2 - - - 2.00
2.00 387.45 1 each 775
Supplying and fixing Saintgobain mirror with alround polish of size 900mm x
600mmx 6mm thickness , plywood back with NP screws 1st quality including
40 cost and conveyance of all materials, labour charges , overheads for finished
item of work in all floors.

1 1 - -
1.00 -
1.00 513.55 1 each 514
Supply and fixing of guns in toilet room ALD -573(Rate as per
41 Quatation)/(Jaquar)

1 1 - - - 1.00
1.00 1350.00 1 each 1350
 Supplying and fixing Gunmetal Gate ( GM peet ) valve as per IS-778 Class - I ,
45 Indian make heavy type including cost and conveyance of all materials , labour
charges etc. complete for finished item of work

40mm 1 1 - - - 1.00
1.00 2448.40 1 each 2448

ELECTRICAL
Supply and fixing of 25mm dia 2.2mm thick P.V.C. pipe (ISI Mark) concealed
48 in Roof Slabs with all required accessories including masonary work and labour
charges etc., complete.
1 20 - - 20.00
20 75.89 1 Kg 1518
Rmt 1 Rmt
Supply and Fixing of 20 mm outer dia 2.10 mm thick Heavy grade with
49 IS:9537 part 3 FRLS regid PVC pipe (ISI MARK) concealed in Roof Slabs
with all required MS deep boxes and all accessories including and labour
charges etc., complete
1 20 - - 20.00
20 74.87 1 Kg 1497
Rmt 1 Rmt
Wiring with 2 runs of 22/0.3mm ( 1.5 Sq.mm) FRLS / HFFR / ZHFR P.V.C.
insulated 1100V grade as per IS : 694 / 1990 specification flexible copper cable
50 (ISI MARK) in existing pipe with 6A Modular switch, Ceiling rose/BH/SBH
Modular switches with cover plate including all labour charges etc., complete
for Light, Fan, Exhaust Fan etc., complete. (for Non Residential Building)
Makes of wires:- Finolex / RR kabel / Havells /KEI / Gloster/ Polycab /
Bonton / V-Guard / GM / Million 1 /HPL 6 / Goldmedal /- Finecab- /Fortune6.00
Art /
Kundancab/ Sudhakar/ Orbit/ Standard/ Tamra/ Anchor 6 685.10 1 Kg 4111
No 1 No
Wiring with three runs of 1.5 sq.mm FRLS / HFFR / ZHFR P.V.C. insulated
1100V grade as per IS : 694 / 1990 specificationflexible copper cable (phase,
neutral, earth) in the existing conduit pipe with 6 Amps Modular type switch,
51
and 6 A 3/2 pin Modular type socket with cover plate on common switch board
etc., complete.
Makes of wires:- Finolex / RR kabel / Havells /KEI / Gloster/ Polycab /
Bonton / V-Guard / GM / Million 1 /HPL 3 / Goldmedal /- Finecab- /Fortune Art /
3.00
Kundancab/ Sudhakar/ Orbit/ Standard/ Tamra/ Anchor 3.00 277.00 1 Kg 831
Makes of switches:- Legrand Arteor / chneider Zen celo/ CrabtreeMurano No or 1 No
Supply and Fixing of
Amare/L&T-englaze 16A/6A, 2 inGoldmedal(i-
/ GM-Zenova/ one socket Push)
with 16A switchMyrius
Legrand control/
52 modular
Crabtree type with
verona MS flush
/ L&T/ boxes withLivia/
HPL/Schneider front GM-
coverZicono/
plate including all labour
charges etc., complete
1 1 - - 1.00
1 493.09 1 Kg 493
No 1 No
Supply and fixing SPN Distribution board with IP-42 protection (Metal Door)
suitable for single phase ELCB / RCCB / DP Isolator as incomer and 10kA SP
53 MCBs as outing going including internal connection and labour charges for
surface/ flush mounting etc., complete.
1 1 - - 1.00
 1 4734.91 1 Kg 4735
No 1 No
Supply, Transportaton, and fixing of 20W, T8,1200mm length LED retrofit
tube light, input voltage AC 220 - 260 Volts with PF>0.9, Surge protection:
54 2KV,THD<10%, with inbuilt driver and frosted cover CCT: 3000K - 5700K,
minimum CRI>70, .etc., completes including all labour charges and
conveyance of all materials etc complete with with flexible wire and
connections.
1 1 - - 1.00
1 1051.62 1 Kg 1052
No 1 No
Providing independent earthling by excavating a trench to a depth of 2.5 M in
all soils, as per size specified in the Data, using 40mm GI B Class Pipe of 2.5
54 Mtrs length with necessary accessories duly providing staggered holes
including filling with equal proportion of Salt and Charcoal in layers and all
labour charges etc., complete.

1 1 - - 1.00
1 885.90 1 Kg 886
No 1 No
Supply and transportation of 60 W LED Street light Luminaire made of
55 pressure diecast alluminium body with powder coated, having protective
toughned glass
1 1 - - 1.00
1 7314.08 1 Kg 7314
No 1 No
Supply and Fixing of batten holder/angle holder on existing block with 7.0W
56 LED bulb and all labour charges etc., complete. In lieu of ceiling rose.

1 6 - - 6.00
6 160.20 1 Kg 961
No 1 No

TOTAL: >>>> 772218

Asst.Engineer Dy.Executive Engineer Executive Engineer

APEWIDC, Srikakulam APEWIDC, Srikakulam APEWIDC, Srikakulam
HIRE CHARGES OF PLANT& MACHNIERY FOR ROAD & BUILDING WORKS FOR THE YEAR
2019-20
Hire Fuel Crew Total Per
Charges Charges Charges
a) Hire charges of Tipper 5.00 371.40 369.30 200.90 941.60 Hour
Cum capacity
b) Hire charges of Tipper 10 344.30 369.30 200.90 914.50 Hour
Tonnes capacity
c) Hire charges of Water Tanker 366.80 369.30 200.90 937.00 Hour
8000 Ltrs capacity
d) Hire charges of Truck 10 344.30 369.30 200.90 914.50 Hour
Tonnes capacity
e) Hire charges of FE loader Hour
1.00 Cum bucket capacity @ 2761.20 0.00 0.00 2761.20
45 Cum

CHARGES FOR LABOUR

1 day Head mazdoor 460.00

2 day Mazdoor 420.00

RATES FOR CONVEYANCE BY MACHINERY

1 Mincipal area allowance 0.00%
2 Industrial area allowance 0.00%
3 Agency area allowance 0.00%
4 Allowable allowance 0.00%
5 Add Overhead Charges & Contractor's Profit 0.000%
A) For Earth/Gravel/Sand/Morrum/Lime/Surki (per Cum):
1 Lead up to 1 Km:
Out put = 5.00 Cum Rate Per Amount
0.15 Hrs. hire charges of Tipper 5.00 Cum @ Rs. 371.40 Hour Rs. 55.71
0.15 Hrs. fuel charges of Tipper 5.00 Cum @ Rs. 369.30 Hour Rs. 55.40
0.15 Hrs. crew charges of Tipper 5.00 Cum @ Rs. 200.90 Hour Rs. 30.14
0.00 add area allowance at 0% on Rs. 30.14 Rs. 0.00
Rate for 5.00 Cum Rs. 141.25
Rate for 1.00 Cum Rs. 28.25
0.00 add overheads and contractors profit at 0% 28.25 Rs. 0.00
on Rs.
Total rate for 1.00 Cum 28.25
AS per SSR 0r say Rs. 28.30

2 Lead up to 2 Km:
Out put = 5.00 Cum Rate Per Amount
0.21 Hrs. hire charges of Tipper 5.00 Cum @ Rs. 371.40 Hour Rs. 77.99
0.21 Hrs. fuel charges of Tipper 5.00 Cum @ Rs. 369.30 Hour Rs. 77.55
0.21 Hrs. crew charges of Tipper 5.00 Cum @ Rs. 200.90 Hour Rs. 42.19
0.00 add area allowance at 0% on Rs. 42.19 Rs. 0.00
Rate for 5.00 Cum Rs. 197.73
Rate for 1.00 Cum Rs. 39.55
0.00 add overheads and contractors profit at 0% 39.55 Hour Rs. 0.00
on Rs.
 Total rate for 1.00 Cum 39.55

AS per SSR 0r say Rs. 39.50

3 Lead up to 3 Km:
Out put = 5.00 Cum Rate Per Amount
0.28 Hrs. hire charges of Tipper 5.00 Cum @ Rs. 371.40 Hour Rs. 103.99
0.28 Hrs. fuel charges of Tipper 5.00 Cum @ Rs. 369.30 Hour Rs. 103.40
0.28 Hrs. crew charges of Tipper 5.00 Cum @ Rs. 200.90 Hour Rs. 56.25
0.00 add area allowance at 0% on Rs. 56.25 Rs. 0.00
Rate for 5.00 Cum Rs. 263.64
Rate for 1.00 Cum Rs. 52.73
0.00 add overheads and contractors profit at 0% 52.73 Hour Rs. 0.00
on Rs.
Total rate for 1.00 Cum 52.73

AS per SSR 0r say Rs. 52.70

Out put = 5.00 Cum Rate Per Amount

0.34 Hrs. hire charges of Tipper 5.00 Cum @ Rs. 371.40 Hour Rs. 126.28
0.34 Hrs. fuel charges of Tipper 5.00 Cum @ Rs. 369.30 Hour Rs. 125.56
0.34 Hrs. crew charges of Tipper 5.00 Cum @ Rs. 200.90 Hour Rs. 68.31
0.00 add area allowance at 0% on Rs. 68.31 Rs. 0.00
Rate for 5.00 Cum Rs. 320.15
Rate for 1.00 Cum Rs. 64.03
0.00 add overheads and contractors profit at 0% 64.03 Hour Rs. 0.00
on Rs.
Total rate for 1.00 Cum 64.03

AS per SSR 0r say Rs. 64.00

5 Lead up to 5 Km:
Out put = 5.00 Cum Rate Per Amount
0.40 Hrs. hire charges of Tipper 5.00 Cum @ Rs. 371.40 Hour Rs. 148.56
0.40 Hrs. fuel charges of Tipper 5.00 Cum @ Rs. 369.30 Hour Rs. 147.72
0.40 Hrs. crew charges of Tipper 5.00 Cum @ Rs. 200.90 Hour Rs. 80.36
0.00 add area allowance at 0% on Rs. 80.36 Rs. 0.00
Rate for 5.00 Cum Rs. 376.64
Rate for 1.00 Cum Rs. 75.33
0.00 add overheads and contractors profit at 0% 75.33 Hour Rs. 0.00
on Rs.
Total rate for 1.00 Cum 75.33

AS per SSR 0r say Rs. 75.30

6 Lead for every Km from 5 to 30 Km:

Out put = 5.00 Cum Rate Per Amount
0.06 Hrs. hire charges of Tipper 5.00 Cum @ Rs. 371.40 Hour Rs. 22.28
0.06 Hrs. fuel charges of Tipper 5.00 Cum @ Rs. 369.30 Hour Rs. 22.16
0.06 Hrs. crew charges of Tipper 5.00 Cum @ Rs. 200.90 Hour Rs. 12.05
0.00 add area allowance at 0% on Rs. 12.05 Rs. 0.00
Rate for 5.00 Cum Rs. 56.49
Rate for 1.00 Cum Rs. 11.30
0.00 add overheads and contractors profit at 0% 11.30 Hour Rs. 0.00
on Rs.
Total rate for 1.00 Cum Rs. 11.30

7 Lead for every Km beyond 30 Km:

 Out put = 5.00 Cum Rate Per Amount
0.05 Hrs. hire charges of Tipper 5.00 Cum @ Rs. 371.40 Hour Rs. 18.57
0.05 Hrs. fuel charges of Tipper 5.00 Cum @ Rs. 369.30 Hour Rs. 18.47
0.05 Hrs. crew charges of Tipper 5.00 Cum @ Rs. 200.90 Hour Rs. 10.05
0.00 add area allowance at 0% on Rs. 10.05 Rs. 0.00
Rate for 5.00 Cum Rs. 47.09
Rate for 1.00 Cum Rs. 9.42
0.00 add overheads and contractors profit at 0% 9.42 Rs. 0.00
on Rs.
Total rate for 1.00 Cum Rs. 9.42
AS per SSR 0r say Rs. 9.40
B) For Rubble/Size stones/Cut stones/Coarse aggregates (per Cum):
1 Lead up to 1 Km:
Out put = 5.00 Cum Rate Per Amount
0.15 Hrs. hire charges of Tipper 5.00 Cum @ Rs. 371.40 Hour Rs. 55.71
0.15 Hrs. fuel charges of Tipper 5.00 Cum @ Rs. 369.30 Hour Rs. 55.40
0.15 Hrs. crew charges of Tipper 5.00 Cum @ Rs. 200.90 Hour Rs. 30.14
0.00 add area allowance at 0% on Rs. 30.14 Rs. 0.00
Rate for 5.00 Cum Rs. 141.25
Rate for 1.00 Cum Rs. 28.25
0.00 add overheads and contractors profit at 0% 28.25 Rs. 0.00
on Rs.
Total rate for 1.00 Cum 28.25

AS per SSR 0r say Rs. 27.40

2 Lead up to 2 Km:
Out put = 5.00 Cum Rate Per Amount
0.21 Hrs. hire charges of Tipper 5.00 Cum @ Rs. 371.40 Hour Rs. 77.99
0.21 Hrs. fuel charges of Tipper 5.00 Cum @ Rs. 369.30 Hour Rs. 77.55
0.21 Hrs. crew charges of Tipper 5.00 Cum @ Rs. 200.90 Hour Rs. 42.19
0.00 add area allowance at 0% on Rs. 42.19 Rs. 0.00
Rate for 5.00 Cum Rs. 197.73
Rate for 1.00 Cum Rs. 39.55
0.00 add overheads and contractors profit at 0% 39.55 Hour Rs. 0.00
on Rs.
Total rate for 1.00 Cum 39.55

AS per SSR 0r say Rs. 38.40

3 Lead up to 3 Km:
Out put = 5.00 Cum Rate Per Amount
0.28 Hrs. hire charges of Tipper 5.00 Cum @ Rs. 371.40 Hour Rs. 103.99
0.28 Hrs. fuel charges of Tipper 5.00 Cum @ Rs. 369.30 Hour Rs. 103.40
0.28 Hrs. crew charges of Tipper 5.00 Cum @ Rs. 200.90 Hour Rs. 56.25
0.00 add area allowance at 0% on Rs. 56.25 Rs. 0.00
Rate for 5.00 Cum Rs. 263.64
Rate for 1.00 Cum Rs. 52.73
0.00 add overheads and contractors profit at 0% 52.73 Hour Rs. 0.00
on Rs.
Total rate for 1.00 Cum 52.73

AS per SSR 0r say Rs. 52.70

4 Lead up to 4 Km:
Out put = 5.00 Cum Rate Per Amount
0.34 Hrs. hire charges of Tipper 5.00 Cum @ Rs. 371.40 Hour Rs. 126.28
0.34 Hrs. fuel charges of Tipper 5.00 Cum @ Rs. 369.30 Hour Rs. 125.56
 0.34 Hrs. crew charges of Tipper 5.00 Cum @ Rs. 200.90 Hour Rs. 68.31
0.00 add area allowance at 0% on Rs. 68.31 Rs. 0.00
Rate for 5.00 Cum Rs. 320.15
Rate for 1.00 Cum Rs. 64.03
0.00 add overheads and contractors profit at 0% 64.03 Hour Rs. 0.00
on Rs.
Total rate for 1.00 Cum 64.03

AS per SSR 0r say Rs. 64.00

5 Lead up to 5 Km:
Out put = 5.00 Cum Rate Per Amount
0.40 Hrs. hire charges of Tipper 5.00 Cum @ Rs. 371.40 Hour Rs. 148.56
0.40 Hrs. fuel charges of Tipper 5.00 Cum @ Rs. 369.30 Hour Rs. 147.72
0.40 Hrs. crew charges of Tipper 5.00 Cum @ Rs. 200.90 Hour Rs. 80.36
0.00 add area allowance at 0% on Rs. 80.36 Rs. 0.00
Rate for 5.00 Cum Rs. 376.64
Rate for 1.00 Cum Rs. 75.33
0.00 add overheads and contractors profit at 0% 75.33 Hour Rs. 0.00
on Rs.
Total rate for 1.00 Cum 75.33

AS per SSR 0r say Rs. 75.30

6 Lead for every Km from 5 to 30 Km:

Out put = 5.00 Cum Rate Per Amount
0.06 Hrs. hire charges of Tipper 5.00 Cum @ Rs. 371.40 Hour Rs. 22.28
0.06 Hrs. fuel charges of Tipper 5.00 Cum @ Rs. 369.30 Hour Rs. 22.16
0.06 Hrs. crew charges of Tipper 5.00 Cum @ Rs. 200.90 Hour Rs. 12.05
0.00 add area allowance at 0% on Rs. 12.05 Rs. 0.00
Rate for 5.00 Cum Rs. 56.49
Rate for 1.00 Cum Rs. 11.3
0.00 add overheads and contractors profit at 0% 11.30 Hour Rs. 0.00
on Rs.
Total rate for 1.00 Cum 11.30
AS per SSR 0r say Rs. 11.30

7 Lead for every Km beyond 30 Km:

Out put = 5.00 Cum Rate Per Amount
0.05 Hrs. hire charges of Tipper 5.00 Cum @ Rs. 371.40 Hour Rs. 18.57
0.05 Hrs. fuel charges of Tipper 5.00 Cum @ Rs. 369.30 Hour Rs. 18.47
0.05 Hrs. crew charges of Tipper 5.00 Cum @ Rs. 200.90 Hour Rs. 10.05
0.00 add area allowance at 0% on Rs. 10.05 Rs. 0.00
Rate for 5.00 Cum Rs. 47.09
Rate for 1.00 Cum Rs. 9.42
0.00 add overheads and contractors profit at 0% 9.42 Rs. 0.00
on Rs.
Total rate for 1.00 Cum 9.42

AS per SSR 0r say Rs. 9.40

C) For Cement/Steel/RCC poles/A.C & G.I sheets/Packed materials (per Tonne):

1 Lead up to 1 Km:
Out put = 8.00 MT Rate Per Amount
0.15 Hrs. hire charges of Tipper 5.00 Cum @ Rs. 371.40 Hour Rs. 55.71
0.15 Hrs. fuel charges of Tipper 5.00 Cum @ Rs. 369.30 Hour Rs. 55.40
0.15 Hrs. crew charges of Tipper 5.00 Cum @ Rs. 200.90 Hour Rs. 30.14
0.00 add area allowance at 0% on Rs. 30.14 Rs. 0.00
 Rate for 8.00 MT Rs. 141.25
Rate for 1.00 MT Rs. 17.66
0.00 add overheads and contractors profit at 0% 17.66 Rs. 0.00
on Rs.
Total rate for 1.00 MT 17.66

AS per SSR 0r say Rs. 17.10

2 Lead up to 2 Km:
Out put = 8.00 MT Rate Per Amount
0.21 Hrs. hire charges of Tipper 5.00 Cum @ Rs. 371.40 Hour Rs. 77.99
0.21 Hrs. fuel charges of Tipper 5.00 Cum @ Rs. 369.30 Hour Rs. 77.55
0.21 Hrs. crew charges of Tipper 5.00 Cum @ Rs. 200.90 Hour Rs. 42.19
0.00 add area allowance at 0% on Rs. 42.19 Rs. 0.00
Rate for 8.00 MT Rs. 197.73
Rate for 1.00 MT Rs. 24.72
0.00 add overheads and contractors profit at 0% 24.72 Hour Rs. 0.00
on Rs.
Total rate for 1.00 MT 24.72

AS per SSR 0r say Rs. 24.00

3 Lead up to 3 Km:
Out put = 8.00 MT Rate Per Amount
0.28 Hrs. hire charges of Tipper 5.00 Cum @ Rs. 371.40 Hour Rs. 103.99
0.28 Hrs. fuel charges of Tipper 5.00 Cum @ Rs. 369.30 Hour Rs. 103.40
0.28 Hrs. crew charges of Tipper 5.00 Cum @ Rs. 200.90 Hour Rs. 56.25
0.00 add area allowance at 0% on Rs. 56.25 Rs. 0.00
Rate for 8.00 MT Rs. 263.64
Rate for 1.00 MT Rs. 32.96
0.00 add overheads and contractors profit at 0% 32.96 Hour Rs. 0.00
on Rs.
Total rate for 1.00 MT 32.96

AS per SSR 0r say Rs. 33.00

4 Lead up to 4 Km:
Out put = 8.00 MT Rate Per Amount
0.34 Hrs. hire charges of Tipper 5.00 Cum @ Rs. 371.40 Hour Rs. 126.28
0.34 Hrs. fuel charges of Tipper 5.00 Cum @ Rs. 369.30 Hour Rs. 125.56
0.34 Hrs. crew charges of Tipper 5.00 Cum @ Rs. 200.90 Hour Rs. 68.31
0.00 add area allowance at 0% on Rs. 68.31 Rs. 0.00
Rate for 8.00 MT Rs. 320.15
Rate for 1.00 MT Rs. 40.02
0.00 add overheads and contractors profit at 0% 40.02 Hour Rs. 0.00
on Rs.
Total rate for 1.00 MT 40.02

AS per SSR 0r say Rs. 40.00

5 Lead up to 5 Km:
Out put = 8.00 MT Rate Per Amount
0.40 Hrs. hire charges of Tipper 5.00 Cum @ Rs. 371.40 Hour Rs. 148.56
0.40 Hrs. fuel charges of Tipper 5.00 Cum @ Rs. 369.30 Hour Rs. 147.72
0.40 Hrs. crew charges of Tipper 5.00 Cum @ Rs. 200.90 Hour Rs. 80.36
0.00 add area allowance at 0% on Rs. 80.36 Rs. 0.00
Rate for 8.00 MT Rs. 376.64
Rate for 1.00 MT Rs. 47.08
 0.00 add overheads and contractors profit at 0% 47.08 Hour Rs. 0.00
on Rs.
Total rate for 1.00 MT 47.08

AS per SSR 0r say Rs. 47.10

6 Lead for every Km from 5 to 30 Km:
Out put = 8.00 MT Rate Per Amount
0.06 Hrs. hire charges of Tipper 5.00 Cum @ Rs. 371.40 Hour Rs. 22.28
0.06 Hrs. fuel charges of Tipper 5.00 Cum @ Rs. 369.30 Hour Rs. 22.16
0.06 Hrs. crew charges of Tipper 5.00 Cum @ Rs. 200.90 Hour Rs. 12.05
0.00 add area allowance at 0% on Rs. 12.05 Rs. 0.00
Rate for 8.00 MT Rs. 56.49
Rate for 1.00 MT Rs. 7.06
0.00 add overheads and contractors profit at 0% 7.06 Hour Rs. 0.00
on Rs.
Total rate for 1.00 MT 7.06

AS per SSR 0r say Rs. 7.10

7 Lead for every Km beyond 30 Km:

Out put = 8.00 MT Rate Per Amount
0.05 Hrs. hire charges of Tipper 5.00 Cum @ Rs. 371.40 Hour Rs. 18.57
0.05 Hrs. fuel charges of Tipper 5.00 Cum @ Rs. 369.30 Hour Rs. 18.47
0.05 Hrs. crew charges of Tipper 5.00 Cum @ Rs. 200.90 Hour Rs. 10.05
0.00 add area allowance at 0% on Rs. 10.05 Rs. 0.00
Rate for 8.00 MT Rs. 47.09
Rate for 1.00 MT Rs. 5.89
0.00 add overheads and contractors profit at 0% 5.89 Rs. 0.00
on Rs.
Total rate for 1.00 MT 5.89

AS per SSR 0r say Rs. 5.90

D) For PCC Slabs/Shabad Slabs/CC & Laterite Blocks/Wood (per Cum):
1 Lead up to 1 Km:
Out put = 3.40 Cum Rate Per Amount
0.15 Hrs. hire charges of Tipper 5.00 Cum @ Rs. 344.00 Hour Rs. 51.60
0.15 Hrs. fuel charges of Tipper 5.00 Cum @ Rs. 369.30 Hour Rs. 55.40
0.15 Hrs. crew charges of Tipper 5.00 Cum @ Rs. 200.90 Hour Rs. 30.14
0.00 add area allowance at 0% on Rs. 30.14 Rs. 0.00
Rate for 3.40 Cum Rs. 137.14
Rate for 1.00 Cum Rs. 40.34
0.00 add overheads and contractors profit at 0% 40.34 Rs. 0.00
on Rs.
Total rate for 1.00 Cum 40.34

AS per SSR 0r say Rs. 40.40

2 Lead up to 2 Km:
Out put = 3.40 Cum Rate Per Amount
0.21 Hrs. hire charges of Tipper 5.00 Cum @ Rs. 371.40 Hour Rs. 77.99
0.21 Hrs. fuel charges of Tipper 5.00 Cum @ Rs. 369.30 Hour Rs. 77.55
0.21 Hrs. crew charges of Tipper 5.00 Cum @ Rs. 200.90 Hour Rs. 42.19
0.00 add area allowance at 0% on Rs. 42.19 Rs. 0.00
Rate for 3.40 Cum Rs. 197.73
Rate for 1.00 Cum Rs. 58.16
0.00 add overheads and contractors profit at 0% 58.16 Hour Rs. 0.00
on Rs.
 Total rate for 1.00 Cum 58.16

AS per SSR 0r say Rs. 56.50

Lead up to 3 Km:
Out put = 3.40 Cum Rate Per Amount
0.28 Hrs. hire charges of Tipper 5.00 Cum @ Rs. 371.40 Hour Rs. 103.99
0.28 Hrs. fuel charges of Tipper 5.00 Cum @ Rs. 369.30 Hour Rs. 103.40
0.28 Hrs. crew charges of Tipper 5.00 Cum @ Rs. 200.90 Hour Rs. 56.25
0.00 add area allowance at 0% on Rs. 56.25 Rs. 0.00
Rate for 3.40 Cum Rs. 263.64
Rate for 1.00 Cum Rs. 77.54
0.00 add overheads and contractors profit at 0% 77.54 Hour Rs. 0.00
on Rs.
Total rate for 1.00 Cum 77.54

AS per SSR 0r say Rs. 77.50

4 Lead up to 4 Km:
Out put = 3.40 Cum Rate Per Amount
0.34 Hrs. hire charges of Tipper 5.00 Cum @ Rs. 371.40 Hour Rs. 126.28
0.34 Hrs. fuel charges of Tipper 5.00 Cum @ Rs. 369.30 Hour Rs. 125.56
0.34 Hrs. crew charges of Tipper 5.00 Cum @ Rs. 200.90 Hour Rs. 68.31
0.00 add area allowance at 0% on Rs. 68.31 Rs. 0.00
Rate for 3.40 Cum Rs. 320.15
Rate for 1.00 Cum Rs. 94.16
0.00 add overheads and contractors profit at 0% 94.16 Hour Rs. 0.00
on Rs.
Total rate for 1.00 Cum 94.16

AS per SSR 0r say Rs. 94.20

5 Lead up to 5 Km:
Out put = 3.40 Cum Rate Per Amount
0.40 Hrs. hire charges of Tipper 5.00 Cum @ Rs. 371.40 Hour Rs. 148.56
0.40 Hrs. fuel charges of Tipper 5.00 Cum @ Rs. 369.30 Hour Rs. 147.72
0.40 Hrs. crew charges of Tipper 5.00 Cum @ Rs. 200.90 Hour Rs. 80.36
0.00 add area allowance at 0% on Rs. 80.36 Rs. 0.00
Rate for 3.40 Cum Rs. 376.64
Rate for 1.00 Cum Rs. 110.78
0.00 add overheads and contractors profit at 0% 110.78 Hour Rs. 0.00
on Rs.
Total rate for 1.00 Cum 110.78

AS per SSR 0r say Rs. 110.80

6 Lead for every Km from 5 to 30 Km:

Out put = 3.40 Cum Rate Per Amount
0.06 Hrs. hire charges of Tipper 5.00 Cum @ Rs. 371.40 Hour Rs. 22.28
0.06 Hrs. fuel charges of Tipper 5.00 Cum @ Rs. 369.30 Hour Rs. 22.16
0.06 Hrs. crew charges of Tipper 5.00 Cum @ Rs. 200.90 Hour Rs. 12.05
0.00 add area allowance at 0% on Rs. 12.05 Rs. 0.00
Rate for 3.40 Cum Rs. 56.49
Rate for 1.00 Cum Rs. 16.61
0.00 add overheads and contractors profit at 0% 16.61 Hour Rs. 0.00
on Rs.
Total rate for 1.00 Cum 16.61
 AS per SSR 0r say Rs. 16.60

7 Lead for every Km beyond 30 Km:

Out put = 3.40 Cum Rate Per Amount
0.05 Hrs. hire charges of Tipper 5.00 Cum @ Rs. 371.40 Hour Rs. 18.57
0.05 Hrs. fuel charges of Tipper 5.00 Cum @ Rs. 369.30 Hour Rs. 18.47
0.05 Hrs. crew charges of Tipper 5.00 Cum @ Rs. 200.90 Hour Rs. 10.05
0.00 add area allowance at 0% on Rs. 10.05 Rs. 0.00
Rate for 3.40 Cum Rs. 47.09
Rate for 1.00 Cum Rs. 13.85
0.00 add overheads and contractors profit at 0% 13.85 Rs. 0.00
on Rs.
Total rate for 1.00 Cum 13.85

AS per SSR 0r say Rs. 13.90

E) For Water (per 1000 Ltrs):

1 Lead up to 1 Km:
Out put = 8000 Ltrs Rate Per Amount
0.15 Hrs. hire charges of water tanker 8000 ltrs 366.80 Hour Rs. 55.02
capacity @ Rs.
0.15 Hrs. fuel charges of water tanker 8000 ltrs 369.30 Hour Rs. 55.40
capacity @ Rs.
0.15 Hrs. crew charges of water tanker 8000 ltrs 200.90 Hour Rs. 30.14
capacity @ Rs.
0.00 add area allowance at 0% on Rs. 30.14 Rs. 0.00
Rate for 8000 Ltrs Rs. 140.56
Rate for 1000 Ltrs Rs. 17.57
0.00 add overheads and contractors profit at 0% 17.57 Rs. 0.00
on Rs.
Total rate for 1000 Ltrs 17.57
AS per SSR 0r say Rs. 17.60

2 Lead up to 2 Km:
Out put = 8000 Ltrs Rate Per Amount
0.21 Hrs. hire charges of water tanker 8000 ltrs 366.80 Hour Rs. 77.03
capacity @ Rs.
0.21 Hrs. fuel charges of water tanker 8000 ltrs 369.30 Hour Rs. 77.55
capacity @ Rs.
0.21 Hrs. crew charges of water tanker 8000 ltrs 200.90 Hour Rs. 42.19
capacity @ Rs.
0.00 add area allowance at 0% on Rs. 42.19 Rs. 0.00
Rate for 8000 Ltrs Rs. 196.77
Rate for 1000 Ltrs Rs. 24.60
0.00 add overheads and contractors profit at 0% 24.60 Rs. 0.00
on Rs.
Total rate for 1000 Ltrs 24.60
AS per SSR or say Rs. 24.60

3 Lead up to 3 Km:
Out put = 8000 Ltrs Rate Per Amount
0.28 Hrs. hire charges of water tanker 8000 ltrs 366.80 Hour Rs. 102.70
capacity @ Rs.
0.28 Hrs. fuel charges of water tanker 8000 ltrs 369.30 Hour Rs. 103.40
capacity @ Rs.
0.28 Hrs. crew charges of water tanker 8000 ltrs 200.90 Hour Rs. 56.25
capacity @ Rs.
0.00 add area allowance at 0% on Rs. 56.25 Rs. 0.00
 Rate for 8000 Ltrs Rs. 262.35
Rate for 1000 Ltrs Rs. 32.79
0.00 add overheads and contractors profit at 0% 32.79 Rs. 0.00
on Rs.
Total rate for 1000 Ltrs 32.79
AS per SSR or say Rs. 32.80

4 Lead up to 4 Km:
Out put = 8000 Ltrs Rate Per Amount
0.34 Hrs. hire charges of water tanker 8000 ltrs 366.80 Hour Rs. 124.71
capacity @ Rs.
0.34 Hrs. fuel charges of water tanker 8000 ltrs 369.30 Hour Rs. 125.56
capacity @ Rs.
0.34 Hrs. crew charges of water tanker 8000 ltrs 200.90 Hour Rs. 68.31
capacity @ Rs.
0.00 add area allowance at 0% on Rs. 68.31 Rs. 0.00
Rate for 8000 Ltrs Rs. 318.58
Rate for 1000 Ltrs Rs. 39.82
0.00 add overheads and contractors profit at 0% 39.82 Rs. 0.00
on Rs.
Total rate for 1000 Ltrs 39.82
AS per SSR or say Rs. 39.80

5 Lead up to 5 Km:
Out put = 8000 Ltrs Rate Per Amount
0.40 Hrs. hire charges of water tanker 8000 ltrs 366.80 Hour Rs. 146.72
capacity @ Rs.
0.40 Hrs. fuel charges of water tanker 8000 ltrs 369.30 Hour Rs. 147.72
capacity @ Rs.
0.40 Hrs. crew charges of water tanker 8000 ltrs 200.90 Hour Rs. 80.36
capacity @ Rs.
0.00 add area allowance at 0% on Rs. 80.36 Rs. 0.00
Rate for 8000 Ltrs Rs. 374.80
Rate for 1000 Ltrs Rs. 46.85
0.00 add overheads and contractors profit at 0% 46.85 Rs. 0.00
on Rs.
Total rate for 1000 Ltrs 46.85
AS per SSR or say Rs. 46.90

6 Lead for every Km from 5 to 30 Km:

Out put = 8000 Ltrs Rate Per Amount
0.06 Hrs. hire charges of water tanker 8000 ltrs 366.80 Hour Rs. 22.01
capacity @ Rs.
0.06 Hrs. fuel charges of water tanker 8000 ltrs 369.30 Hour Rs. 22.16
capacity @ Rs.
0.06 Hrs. crew charges of water tanker 8000 ltrs 200.90 Hour Rs. 12.05
capacity @ Rs.
0.00 add area allowance at 0% on Rs. 12.05 Rs. 0.00
Rate for 8000 Ltrs Rs. 56.22
Rate for 1000 Ltrs Rs. 7.03
0.00 add overheads and contractors profit at 0% 7.03 Rs. 0.00
on Rs.
Total rate for 1000 Ltrs 7.03
AS per SSR or say Rs. 7.00

7 Lead for every Km beyond 30 Km:

Out put = 8000 Ltrs Rate Per Amount
0.05 Hrs. hire charges of water tanker 8000 ltrs 366.80 Hour Rs. 18.34
capacity @ Rs.
 0.05 Hrs. fuel charges of water tanker 8000 ltrs 369.30 Hour Rs. 18.47
capacity @ Rs.
0.05 Hrs. crew charges of water tanker 8000 ltrs 200.90 Hour Rs. 10.05
capacity @ Rs.
0.00 add area allowance at 0% on Rs. 10.05 Rs. 0.00
Rate for 8000 Ltrs Rs. 46.86
Rate for 1000 Ltrs Rs. 5.86
0.00 add overheads and contractors profit at 0% 5.86 Rs. 0.00
on Rs.
Total rate for 1000 Ltrs 5.86
AS per SSR or say Rs. 5.90

F) For Bricks (per 1000 Nos):

1 Lead up to 1 Km:
Out put = 3000 Nos Rate Per Amount
0.15 Hrs. hire charges of Truck 10 Tonnes 344.30 #N/A Rs. 51.65
capacity @ Rs.
0.15 Hrs. fuel charges of Truck 10 Tonnes 369.30 #N/A Rs. 55.40
capacity @ Rs.
0.15 Hrs. crew charges of Truck 10 Tonnes 200.90 #N/A Rs. 30.14
capacity @ Rs.
0.00 add area allowance at 0% on Rs. 30.14 Rs. 0.00
Rate for 3000 Nos Rs. 137.19
Rate for 1000 Nos Rs. 45.73
0.00 add overheads and contractors profit at 0% 45.73 Rs. 0.00
on Rs.
Total rate for 1000 Nos 45.73
AS per SSR or say Rs. 45.70

2 Lead up to 2 Km:
Out put = 3000 Nos Rate Per Amount
0.21 Hrs. hire charges of Truck 10 Tonnes 344.30 Hour Rs. 72.30
capacity @ Rs.
0.21 Hrs. fuel charges of Truck 10 Tonnes 369.30 Hour Rs. 77.55
capacity @ Rs.
0.21 Hrs. crew charges of Truck 10 Tonnes 200.90 Hour Rs. 42.19
capacity @ Rs.
0.00 add area allowance at 0% on Rs. 42.19 Rs. 0.00
Rate for 3000 Nos Rs. 192.04
Rate for 1000 Nos Rs. 64.01
0.00 add overheads and contractors profit at 0% 64.01 Rs. 0.00
on Rs.
Total rate for 1000 Nos 64.01
AS per SSR or say Rs. 64.00

3 Lead up to 3 Km:
Out put = 3000 Nos Rate Per Amount
0.28 Hrs. hire charges of Truck 10 Tonnes 344.30 Hour Rs. 96.40
capacity @ Rs.
0.28 Hrs. fuel charges of Truck 10 Tonnes 369.30 Hour Rs. 103.40
capacity @ Rs.
0.28 Hrs. crew charges of Truck 10 Tonnes 200.90 Hour Rs. 56.25
capacity @ Rs.
0.00 add area allowance at 0% on Rs. 56.25 Rs. 0.00
Rate for 3000 Nos Rs. 256.05
Rate for 1000 Nos Rs. 85.35
0.00 add overheads and contractors profit at 0% 85.35 Rs. 0.00
on Rs.
 Total rate for 1000 Nos 85.35
AS per SSR or say Rs. 85.40

4 Lead up to 4 Km:
Out put = 3000 Nos Rate Per Amount
0.34 Hrs. hire charges of Truck 10 Tonnes 344.30 Hour Rs. 117.06
capacity @ Rs.
0.34 Hrs. fuel charges of Truck 10 Tonnes 369.30 Hour Rs. 125.56
capacity @ Rs.
0.34 Hrs. crew charges of Truck 10 Tonnes 200.90 Hour Rs. 68.31
capacity @ Rs.
0.00 add area allowance at 0% on Rs. 68.31 Rs. 0.00
Rate for 3000 Nos Rs. 310.93
Rate for 1000 Nos Rs. 103.64
0.00 add overheads and contractors profit at 0% 103.64 Rs. 0.00
on Rs.
Total rate for 1000 Nos 103.64
AS per SSR or say Rs. 103.60

5 Lead up to 5 Km:
Out put = 3000 Nos Rate Per Amount
0.40 Hrs. hire charges of Truck 10 Tonnes 344.30 Hour Rs. 137.72
capacity @ Rs.
0.40 Hrs. fuel charges of Truck 10 Tonnes 369.30 Hour Rs. 147.72
capacity @ Rs.
0.40 Hrs. crew charges of Truck 10 Tonnes 200.90 Hour Rs. 80.36
capacity @ Rs.
0.00 add area allowance at 0% on Rs. 80.36 Rs. 0.00
Rate for 3000 Nos Rs. 365.80
Rate for 1000 Nos Rs. 121.93
0.00 add overheads and contractors profit at 0% 121.93 Rs. 0.00
on Rs.
Total rate for 1000 Nos 121.93
AS per SSR or say Rs. 121.90

6 Lead for every Km beyond 5 Kms up to 30 Kms:

Out put = 3000 Nos Rate Per Amount
0.06 Hrs. hire charges of Truck 10 Tonnes 344.30 Hour Rs. 20.66
capacity @ Rs.
0.06 Hrs. fuel charges of Truck 10 Tonnes 369.30 Hour Rs. 22.16
capacity @ Rs.
0.06 Hrs. crew charges of Truck 10 Tonnes 200.90 Hour Rs. 12.05
capacity @ Rs.
0.00 add area allowance at 0% on Rs. 12.05 Rs. 0.00
Rate for 3000 Nos Rs. 54.87
Rate for 1000 Nos Rs. 18.29
0.00 add overheads and contractors profit at 0% 18.29 Rs. 0.00
on Rs.
Total rate for 1000 Nos 18.29
AS per SSR or say Rs. 18.30

7 Lead for every Km beyond 30 Kms:

Out put = 3000 Nos Rate Per Amount
0.05 Hrs. hire charges of Truck 10 Tonnes 344.30 Rs. 17.22
capacity @ Rs.
0.05 Hrs. fuel charges of Truck 10 Tonnes 369.30 Hour Rs. 18.47
capacity @ Rs.
 0.05 Hrs. crew charges of Truck 10 Tonnes 200.90 Hour Rs. 10.05
capacity @ Rs.
0.00 add area allowance at 0% on Rs. 10.05 Rs. 0.00
Rate for 3000 Nos Rs. 45.74
Rate for 1000 Nos Rs. 15.25
0.00 add overheads and contractors profit at 0% 15.25 Rs. 0.00
on Rs.
Total rate for 1000 Nos 15.25
AS per SSR or say Rs. 15.20

LOADING & UNLOADING CHARGES BY MANUAL MEANS (EXCLUDING IDLE HIRE

CHARGES OF TRUCKS)
A) For Earth, Sand, Morrum, Manure, Fly Ash (per Cum):
(i) Loading charges:
Out put = 5.50 Cum Rate Per Amount
a) Labour:
0.01 day Head mazdoor 460.00 day Rs. 4.60
0.25 day Mazdoor 420.00 day Rs. 105.00
Rs. 109.60
0.00 add area allowance at 0% on Rs. 109.60 Rs. 0.00
Total labour charges Rs. 109.60
Rate for 5.50 Cum Rs. 109.60
Rate for 1.00 Cum Rs. 19.93
0.00 add overheads and contractors profit at 0% 19.93 Rs. 0.00
on Rs.
Total rate for 1 Cum 19.93
AS per SSR or say Rs. 19.80

(ii) Unloading charges:{50% of loading charges}

Out put = 5.50 Cum Rate Per Amount
a) Labour:
0.010 day Head mazdoor 460.00 day Rs. 4.60
0.250 day Mazdoor 420.00 day Rs. 105.00
Rs. 109.60
0.00 add area allowance at 0% on Rs. 109.60 Rs. 0.00
Total labour charges Rs. 109.60
Rate for 5.50 Cum Rs. 109.60
Rate for 1.00 Cum Rs. 19.93
0.00 add overheads and contractors profit at 0% 19.93 Rs. 0.00
on Rs.
Total rate for 1 Cum 19.93
AS per SSR or say Rs. 9.96

B) For Lime, Agrregate, Stone Boulder, Brick aggregate, Kankar, Building rubbish, Crushed
slag, Stone for masonry work (per Cum):
(i) Loading charges:
Out put = 5.50 Cum Rate Per Amount
a) Labour:
0.02 day Head mazdoor 460.00 day Rs. 9.20
0.50 day Mazdoor 420.00 day Rs. 210.00
Rs. 219.20
0.00 add area allowance at 0% on Rs. 219.20 Rs. 0.00
Total labour charges Rs. 219.20
Rate for 5.50 Cum Rs. 219.20
Rate for 1.00 Cum Rs. 39.85
0.00 add overheads and contractors profit at 0% 39.85 Rs. 0.00
on Rs.
Total rate for 1 Cum 39.85
AS per SSR or say Rs. 39.90
 (ii) Unloading charges:
Out put = 5.50 Cum Rate Per Amount
a) Labour:
0.01 day Head mazdoor 460.00 day Rs. 4.60
0.25 day Mazdoor 420.00 day Rs. 105.00
Rs. 109.60
0.00 add area allowance at 0% on Rs. 109.60 Rs. 0.00
Total labour charges Rs. 109.60
Rate for 5.50 Cum Rs. 109.60
Rate for 1.00 Cum Rs. 19.93
0.00 add overheads and contractors profit at 0% 19.93 Rs. 0.00
on Rs.
Total rate for 1 Cum 19.93
AS per SSR or say Rs. 19.95

C) For Cement (per Tonne):

(i) Loading charges:
Out put = 10.00 MT Rate Per Amount
a) Labour:
0.06 day Head mazdoor 460.00 day Rs. 27.60
1.50 day Mazdoor 420.00 day Rs. 630.00
Rs. 657.60
0.00 add area allowance at 0% on Rs. 657.60 Rs. 0.00
Total labour charges Rs. 657.60
Rate for 10.00 MT Rs. 657.60
Rate for 1.00 MT Rs. 65.76
0.00 add overheads and contractors profit at 0% 65.76 Rs. 0.00
on Rs.
Total rate for 1 MT 65.76
AS per SSR or say Rs. 65.80

(ii) Unloading & Stacking charges:

Out put = 10.00 MT Rate Per Amount
a) Labour:
0.06 day Head mazdoor 460.00 day Rs. 27.60
1.50 day Mazdoor 420.00 day Rs. 630.00
Rs. 657.60
0.00 add area allowance at 0% on Rs. 657.60 Rs. 0.00
Total labour charges Rs. 657.60
Rate for 10.00 MT Rs. 657.60
Rate for 1.00 MT Rs. 65.76
0.00 add overheads and contractors profit at 0% 65.76 Rs. 0.00
on Rs.
Total rate for 1 MT 65.76
AS per SSR or say Rs. 65.80

D) For Structural steel, Steel bars (per Tonne):

(i) Loading charges:
Out put = 10.00 MT Rate Per Amount
a) Labour:
0.07 day Head mazdoor 460.00 day Rs. 32.20
1.80 day Mazdoor 420.00 day Rs. 756.00
Rs. 788.20
0.00 add area allowance at 0% on Rs. 788.20 Rs. 0.00
Total labour charges Rs. 788.20
Rate for 10.00 MT Rs. 788.20
Rate for 1.00 MT Rs. 78.82
0.00 add overheads and contractors profit at 0% 78.82 Rs. 0.00
on Rs.
 Total rate for 1 MT 78.82
AS per SSR or say Rs. 78.80

(ii) Unloading & Stacking charges:

Out put = 10.00 MT Rate Per Amount
a) Labour:
0.07 day Head mazdoor 460.00 day Rs. 32.20
1.80 day Mazdoor 420.00 day Rs. 756.00
Rs. 788.20
0.00 add area allowance at 0% on Rs. 788.20 Rs. 0.00
Total labour charges Rs. 788.20
Rate for 10.00 MT Rs. 788.20
Rate for 1.00 MT Rs. 78.82
0.00 add overheads and contractors profit at 0% 78.82 Rs. 0.00
on Rs.
Total rate for 1 MT 78.82
AS per SSR or say Rs. 78.80

E) For Bricks of size 225 x 140 x 70mm (per 1000 Nos):

(i) Loading charges:
Out put = 2000.00 Nos Rate Per Amount
a) Labour:
0.01 day Head mazdoor 460.00 day Rs. 4.60
0.25 day Mazdoor 420.00 day Rs. 105.00
Rs. 109.60
0.00 add area allowance at 0% on Rs. 109.60 Rs. 0.00
Total labour charges Rs. 109.60
Rate for 2000 Nos Rs. 109.60
Rate for 1000 Nos Rs. 54.80
0.00 add overheads and contractors profit at 0% 54.80 Rs. 0.00
on Rs.
Total rate for 1000 Nos 54.80
AS per SSR or say Rs. 54.80

(ii) Unloading & Stacking charges:

Out put = 2000.00 Nos Rate Per Amount
a) Labour:
0.01 day Head mazdoor 460.00 day Rs. 4.60
0.25 day Mazdoor 420.00 day Rs. 105.00
Rs. 109.60
0.00 add area allowance at 0% on Rs. 109.60 Rs. 0.00
Total labour charges Rs. 109.60
Rate for 2000 Nos Rs. 109.60
Rate for 1000 Nos Rs. 54.80
0.00 add overheads and contractors profit at 0% 54.80 Rs. 0.00
on Rs.
Total rate for 1000 Nos 54.80
AS per SSR 0r say Rs. 54.80

LOADING & UNLOADING CHARGES BY MANUAL MEANS (INCLUDING IDLE HIRE CHARGES
OF TRUCKS)
A) For Earth, Sand, Morrum, Manure, Fly Ash (per Cum):
(i) Loading charges:
Out put = 5.50 Cum Rate Per Amount
a) Labour:
0.01 day Head mazdoor 460.00 day Rs. 4.60
0.25 day Mazdoor 420.00 day Rs. 105.00
Rs. 109.60
0.00 add area allowance at 0% on Rs. 109.60 Rs. 0.00
 Total labour charges Rs. 109.60
b) Machinery:
0.50 Hrs. hire charges of Truck 10 Tonnes 344.30 Hour Rs. 172.15
capacity @ Rs.
0.50 Hrs. fuel charges of Truck 10 Tonnes 369.30 Hour Rs. 184.65
capacity @ Rs.
0.50 Hrs. crew charges of Truck 10 Tonnes 200.90 Hour Rs. 100.45
capacity @ Rs.
0.00 add area allowance at 0% on Rs. 100.45 Rs. 0.00
Total machinery charges Rs. 457.25
Total labour and machinery charges Rs. 566.85
Rate for 5.50 Cum Rs. 566.85
Rate for 1.00 Cum Rs. 103.06
0.00 add overheads and contractors profit at 0% 103.06 Rs. 0.00
on Rs.
Total rate for 1 Cum 103.06
AS per SSR 0r say Rs. 103.10

(ii) Unloading charges:

Out put = 5.50 Cum Rate Per Amount
a) Labour:
0.005 day Head mazdoor 460.00 day Rs. 2.30
0.125 day Mazdoor 420.00 day Rs. 52.50
Rs. 54.80
0.00 add area allowance at 0% on Rs. 54.80 Rs. 0.00
Total labour charges Rs. 54.80
b) Machinery:
0.166 Hrs. hire charges of Truck 10 Tonnes 344.30 Hour Rs. 57.15
capacity @ Rs.
0.166 Hrs. fuel charges of Truck 10 Tonnes 369.30 Hour Rs. 61.30
capacity @ Rs.
0.166 Hrs. crew charges of Truck 10 Tonnes 200.90 Hour Rs. 33.35
capacity @ Rs.
0.00 add area allowance at 0% on Rs. 33.35 Rs. 0.00
Total machinery charges Rs. 151.80
Total labour and machinery charges Rs. 206.60
Rate for 5.50 Cum Rs. 206.60
Rate for 1.00 Cum Rs. 37.56
0.00 add overheads and contractors profit at 0% 37.56 Rs. 0.00
on Rs.
Total rate for 1 Cum 37.56
AS per SSR 0r say Rs. 37.60

B) For Lime, Agrregate, Stone Boulder, Brick aggregate, Kankar, Building rubbish, Crushed
slag, Stone for machinery work (per Cum):
(i) Loading charges:
Out put = 5.50 Cum Rate Per Amount
a) Labour:
0.02 day Head mazdoor 460.00 day Rs. 9.20
0.50 day Mazdoor 420.00 day Rs. 210.00
Rs. 219.20
0.00 add area allowance at 0% on Rs. 219.20 Rs. 0.00
Total labour charges Rs. 219.20
b) Machinery:
0.50 Hrs. hire charges of Truck 10 Tonnes 344.30 Hour Rs. 172.15
capacity @ Rs.
0.50 Hrs. fuel charges of Truck 10 Tonnes 369.30 Hour Rs. 184.65
capacity @ Rs.
 0.50 Hrs. crew charges of Truck 10 Tonnes 200.90 Hour Rs. 100.45
capacity @ Rs.
0.00 add area allowance at 0% on Rs. 100.45 Rs. 0.00
Total machinery charges Rs. 457.25
Total labour and machinery charges Rs. 676.45
Rate for 5.50 Cum Rs. 676.45
Rate for 1.00 Cum Rs. 122.99
0.00 add overheads and contractors profit at 0% 122.99 Rs. 0.00
on Rs.
Total rate for 1 Cum 122.99
AS per SSR 0r say Rs. 123.00

(ii) Unloading charges:(50% of loading charges)

Out put = 5.50 Cum Rate Per Amount
a) Labour:
0.01 day Head mazdoor 460.00 day Rs. 4.60
0.25 day Mazdoor 420.00 day Rs. 105.00
Rs. 109.60
0.00 add area allowance at 0% on Rs. 109.60 Rs. 0.00
Total labour charges Rs. 109.60
b) Machinery:
0.25 Hrs. hire charges of Truck 10 Tonnes 344.30 Hour Rs. 86.08
capacity @ Rs.
0.25 Hrs. fuel charges of Truck 10 Tonnes 369.30 Hour Rs. 92.33
capacity @ Rs.
0.25 Hrs. crew charges of Truck 10 Tonnes 200.90 Hour Rs. 50.23
capacity @ Rs.
0.00 add area allowance at 0% on Rs. 50.23 Rs. 0.00
Total machinery charges Rs. 228.64
Total labour and machinery charges Rs. 338.24
Rate for 5.50 Cum Rs. 338.24
Rate for 1.00 Cum Rs. 61.5
0.00 add overheads and contractors profit at 0% 61.50 Rs. 0.00
on Rs.
Total rate for 1 Cum 61.50
AS per SSR 0r say Rs. 61.50

C) For Cement (per Tonne):

(i) Loading charges:
Out put = 10.00 MT Rate Per Amount
a) Labour:
0.06 day Head mazdoor 460.00 day Rs. 27.60
1.50 day Mazdoor 420.00 day Rs. 630.00
Rs. 657.60
0.00 add area allowance at 0% on Rs. 657.60 Rs. 0.00
Total labour charges Rs. 657.60
b) Machinery:
1.00 Hrs. hire charges of Truck 10 Tonnes 344.30 Hour Rs. 344.30
capacity @ Rs.
1.00 Hrs. fuel charges of Truck 10 Tonnes 369.30 Hour Rs. 369.30
capacity @ Rs.
1.00 Hrs. crew charges of Truck 10 Tonnes 200.90 Hour Rs. 200.90
capacity @ Rs.
0.00 add area allowance at 0% on Rs. 200.90 Rs. 0.00
Total machinery charges Rs. 914.50
Total labour and machinery charges Rs. 1572.10
Rate for 10.00 MT Rs. 1572.10
Rate for 1.00 MT Rs. 157.21
 0.00 add overheads and contractors profit at 0% 157.21 Rs. 0.00
on Rs.
Total rate for 1 MT 157.21
AS per SSR 0r say Rs. 157.20

(ii) Unloading & Stacking charges:

Out put = 10.00 MT Rate Per Amount
a) Labour:
0.06 day Head mazdoor 460.00 day Rs. 27.60
1.50 day Mazdoor 420.00 day Rs. 630.00
Rs. 657.60
0.00 add area allowance at 0% on Rs. 657.60 Rs. 0.00
Total labour charges Rs. 657.60
b) Machinery:
1.00 Hrs. hire charges of Truck 10 Tonnes 344.30 Hour Rs. 344.30
capacity @ Rs.
1.00 Hrs. fuel charges of Truck 10 Tonnes 369.30 Hour Rs. 369.30
capacity @ Rs.
1.00 Hrs. crew charges of Truck 10 Tonnes 200.90 Hour Rs. 200.90
capacity @ Rs.
0.00 add area allowance at 0% on Rs. 200.90 Rs. 0.00
Total machinery charges Rs. 914.50
Total labour and machinery charges Rs. 1572.10
Rate for 10.00 MT Rs. 1572.10
Rate for 1.00 MT Rs. 157.21
0.00 add overheads and contractors profit at 0% 157.21 Rs. 0.00
on Rs.
Total rate for 1 MT 157.21
AS per SSR 0r say Rs. 157.20

D) For Structural steel, Steel bars (per Tonne):

(i) Loading charges:
Out put = 10.00 MT Rate Per Amount
a) Labour:
0.07 day Head mazdoor 460.00 day Rs. 32.20
1.80 day Mazdoor 420.00 day Rs. 756.00
Rs. 788.20
0.00 add area allowance at 0% on Rs. 788.20 Rs. 0.00
Total labour charges Rs. 788.20
b) Machinery:
1.00 Hrs. hire charges of Truck 10 Tonnes 344.30 Hour Rs. 344.30
capacity @ Rs.
1.00 Hrs. fuel charges of Truck 10 Tonnes 369.30 Hour Rs. 369.30
capacity @ Rs.
1.00 Hrs. crew charges of Truck 10 Tonnes 200.90 Hour Rs. 200.90
capacity @ Rs.
0.00 add area allowance at 0% on Rs. 200.90 Rs. 0.00
Total machinery charges Rs. 914.50
Total labour and machinery charges Rs. 1702.70
Rate for 10.00 MT Rs. 1702.70
Rate for 1.00 MT Rs. 170.27
0.00 add overheads and contractors profit at 0% 170.27 Rs. 0.00
on Rs.
Total rate for 1 MT 170.27
AS per SSR 0r say Rs. 170.30

(ii) Unloading & Stacking charges:

Out put = 10.00 MT Rate Per Amount
a) Labour:
 0.07 day Head mazdoor 460.00 day Rs. 32.20
1.80 day Mazdoor 420.00 day Rs. 756.00
Rs. 788.20
0.00 add area allowance at 0% on Rs. 788.20 Rs. 0.00
Total labour charges Rs. 788.20
b) Machinery:
1.00 Hrs. hire charges of Truck 10 Tonnes 344.30 Hour Rs. 344.30
capacity @ Rs.
1.00 Hrs. fuel charges of Truck 10 Tonnes 369.30 Hour Rs. 369.30
capacity @ Rs.
1.00 Hrs. crew charges of Truck 10 Tonnes 200.90 Hour Rs. 200.90
capacity @ Rs.
0.00 add area allowance at 0% on Rs. 200.90 Rs. 0.00
Total machinery charges Rs. 914.50
Total labour and machinery charges Rs. 1702.70
Rate for 10.00 MT Rs. 1702.70
Rate for 1.00 MT Rs. 170.27
0.00 add overheads and contractors profit at 0% 170.27 Rs. 0.00
on Rs.
Total rate for 1 MT 170.27
AS per SSR 0r say Rs. 170.30

E) For Bricks of size 225 x 140 x 70mm (per 1000 Nos):

(i) Loading charges:
Out put = 2000.00 Nos Rate Per Amount
a) Labour:
0.01 day Head mazdoor 460.00 day Rs. 4.60
0.25 day Mazdoor 420.00 day Rs. 105.00
Rs. 109.60
0.00 add area allowance at 0% on Rs. 109.60 Rs. 0.00
Total labour charges Rs. 109.60
b) Machinery:
0.33 Hrs. hire charges of Truck 10 Tonnes 344.30 Hour Rs. 113.62
capacity @ Rs.
0.33 Hrs. fuel charges of Truck 10 Tonnes 369.30 Hour Rs. 121.87
capacity @ Rs.
0.33 Hrs. crew charges of Truck 10 Tonnes 200.90 Hour Rs. 66.30
capacity @ Rs.
0.00 add area allowance at 0% on Rs. 66.30 Rs. 0.00

Total machinery charges Rs. 301.79

Total labour and machinery charges Rs. 411.39

Rate for 2000 Nos Rs. 411.39

Rate for 1000 Nos Rs. 205.70
0.00 add overheads and contractors profit at 0% 205.70 Rs. 0.00
on Rs.
Total rate for 1000 Nos Rs. 205.70

(ii) Unloading & Stacking charges:

Out put = 2000.00 Nos Rate Per Amount
a) Labour:
0.01 day Head mazdoor 460.00 day Rs. 4.60
0.25 day Mazdoor 420.00 day Rs. 105.00
Rs. 109.60
0.00 add area allowance at 0% on Rs. 109.60 Rs. 0.00
Total labour charges Rs. 109.60
b) Machinery:
 0.33 Hrs. hire charges of Truck 10 Tonnes 344.30 Hour Rs. 113.62
capacity @ Rs.
0.33 Hrs. fuel charges of Truck 10 Tonnes 369.30 Hour Rs. 121.87
capacity @ Rs.
0.33 Hrs. crew charges of Truck 10 Tonnes 200.90 Hour Rs. 66.30
capacity @ Rs.
0.00 add area allowance at 0% on Rs. 66.30 Rs. 0.00
Total machinery charges Rs. 301.79
Total labour and machinery charges Rs. 411.39
Rate for 2000 Nos Rs. 411.39
Rate for 1000 Nos Rs. 205.7
0.00 add overheads and contractors profit at 0% 205.70 Rs. 0.00
on Rs.
Total rate for 1000 Nos Rs. 205.70

LOADING & UNLOADING CHARGES BY MECHANICAL MEANS (INCLUDING IDLE HIRE

CHARGES OF TRUCKS)
A) For Earth, Sand, Morrum, Manure, Fly Ash (per Cum):
(i) Loading charges:
Out put = 5.50 Cum Rate Per Amount
a) Machinery:
0.105 Hrs. hire charges of Tipper 10 Tonnes 344.30 Hour Rs. 36.15
capacity @ Rs.
0.105 Hrs. fuel charges of Tipper 10 Tonnes 369.30 Hour Rs. 38.78
capacity @ Rs.
0.105 Hrs. crew charges of Tipper 10 Tonnes 200.90 Hour Rs. 21.09
capacity @ Rs.
0.055 Hrs. FE loader 1.00 Cum bucket capacity @ 2761.20 Hour Rs. 151.87
45 Cum including Hire charges, fuel charges
and crew charges @ Rs.

0.00 add area allowance at 0% on Rs. 0.00 Rs. 0.00

Total machinery charges Rs. 247.89
Rate for 5.50 Cum Rs. 247.89
Rate for 1.00 Cum Rs. 45.07
0.00 add overheads and contractors profit at 0% 45.07 Rs. 0.00
on Rs.
Total rate for 1 Cum 45.07
AS per SSR 0r say Rs. 45.60

(ii) Unloading charges:

Out put = 5.50 Cum Rate Per Amount
a) Machinery:
0.105 Hrs. hire charges of Tipper 5 Tonnes 344.30 Hour Rs. 36.15
capacity @ Rs.
0.105 Hrs. fuel charges of Tipper 5Tonnes capacity 369.30 Hour Rs. 38.78
@ Rs.
0.105 Hrs. crew charges of Tipper 10 Tonnes 200.90 Hour Rs. 21.09
capacity @ Rs.
0.055 Hrs. FE loader 1.00 Cum bucket capacity @ 2761.20 Hour Rs. 151.87
45 Cum including Hire charges, fuel charges
and crew charges @ Rs.

Total machinery charges Rs. 247.89

Rate for 5.50 Cum Rs. 247.89
Rate for 1.00 Cum Rs. 45.07
0.00 add overheads and contractors profit at 0% 45.07 Rs. 0.00
on Rs.
Total rate for 1 Cum 45.07
 AS per SSR 0r say Rs. 45.60

B) For Lime, Agrregate, Stone Boulder, Brick aggregate, Kankar, Building rubbish, Crushed
slag, Stone for machinery work (per Cum):
(i) Loading charges:
Out put = 5.50 Cum Rate Per Amount
a) Machinery:
0.17 Hrs. hire charges of Tipper 10 Tonnes 344.30 Hour Rs. 58.53
capacity @ Rs.
0.17 Hrs. fuel charges of Tipper 10 Tonnes 369.30 Hour Rs. 62.78
capacity @ Rs.
0.17 Hrs. crew charges of Tipper 10 Tonnes 200.90 Hour Rs. 34.15
capacity @ Rs.
0.12 Hrs. FE loader 1.00 Cum bucket capacity @ 2761.20 Hour Rs. 331.34
45 Cum including Hire charges, fuel charges
and crew charges @ Rs.

0.00 add area allowance at 0% on Rs. 0.00 Rs. 0.00

Total machinery charges Rs. 486.80
Rate for 5.50 Cum Rs. 486.80
Rate for 1.00 Cum Rs. 88.51
0.00 add overheads and contractors profit at 0% 88.51 Rs. 0.00
on Rs.
Total rate for 1 Cum 88.51
AS per SSR 0r say Rs. 90.80
 Name of the work : Improving Infrastructure Facilities to Govt.Polytechnic at Srikakulam (V&M) in Srikakulam District
Under Nadu - Nedu

Estimate Cost: Rs. 55.08 Lakhs

Item short
Estimate Type of
descriptio Rate (Rs.)
Quantity work (200 Apss/mor
S.no Descripation of Work n (100 up to 2 Unit Amount (Rs.)
(only charectors d number
charectors decimals
figures) )
)

Ground Floor
1 160.00 Earth work excavation and depositing on bank with initial lead of 10m and Earth Earth 308 133.80 Cum 21408.00
initial lift of 3m in Loamy & Clayey Soils like BC Soils, Red Earth & work work
Ordinary Gravelly Soils ( SS 20-B) including all operational incidental
labour charges such as shoring, strutting, sheeting, planking and
dewatering including cost of hire charges of T & P, labour charges etc.,
complete for finished item of work including seignerage charges excluding
dewatering charges etc., complete for Foundation of Building.(APSS No.
308)

2 13.00 Plain Cement Concrete corresponding to M7.5 grade as per IS 456 PCC PCC 402 2924.45 Cum 38018.00
equivalent to (1:4:8) proportion nominal mix (cement: fine aggregate: M7.5 M7.5
Coarse aggregate) using 40mm size Hard Blasted Granite (IS383, 1970)
metal from approved quarry including cost and conveyance of all
materials like cement, sand, coarse aggregate, water etc. to site,
including seigniorage charges, sales & other taxes on all materials, all
operational, incidental, and labour charges such as mixing, laying and
ramming concrete in layers in position not exceeding 15cm, finishing top
surface, curing concrete, etc., complete for finished item of work for
Foundations (APSS No. 402)

3 25.50 Plain Cement Concrete corresponding to M5 grade as per IS 456 PCC PCC 402 2752.50 Cum 70189.00
equivalent to (1:5:10) proportion nominal mix (cement: fine aggregate: M5 M5
Coarse aggregate) using 40mm size Hard Blasted Granite (IS383, 1970)
metal from approved quarry including cost and conveyance of all
materials like cement, sand, coarse aggregate, water etc. to site,
including seigniorage charges, sales & other taxes on all materials, all
operational, incidental, and labour charges such as mixing, laying and
ramming concrete in layers in position not exceeding 15cm, finishing top
surface, curing concrete, etc., complete for finished item of work for
Foundations and Flooring Bed (APSS No. 402) .

Page 38 of 222
4 44.00 Random Rubble stone masonry, in CM (1:8) prop: (Cement: Sand) using RR Stone RR Stone 601 & 2326.35 Cum 102359.00
Hard blasted Granite stones from approved quarry including cost and Masonry Masonry 615
conveyance of all materials like Granite stones, cement, sand, water,
etc., to site including seigniorage charges, sales & other taxes on all
materials, all operational, incidental, and labour charges such as cutting
stones to required size and shape, mixing of cement mortar, constructing
masonry, curing etc., complete for finished item of work for foundation
and basement (APSS No. 601 & 615)
5 26.50 Vibrated Reinforced Cement Concrete M 20 Design Mix ( by weigh VRCC VRCC 402 & 403 7008.20 Cum 185717.00
batching ) using 20mm size (SS5) hard blasted granite machine crushed M20 mix M20 mix
graded metal (Coarse aggregate) from approved quarry, using a
minimum quantity of 350 kgs. of cement per 1 cum of concreteincluding
cost and conveyance of all materials like cement, fine aggregate
(Sand), coarse aggregate, water etc., to site and cost of seigniorage
charges on all materials including centering using Steel scaffolding pipes,
jack props, wallers, foot plates, brackets, steel centering plates, etc.,
shuttering , machine mixing, laying concrete, vibrating,lift charges, curing
etc., complete but excluding cost of steel and it’s fabrication charges for
finished item of work (APSS No. 402 & 403) : for Column Footings

6 3.00 Vibrated Reinforced Cement Concrete M 20 Design Mix ( by weigh VRCC VRCC 402 & 403 7342.10 Cum 22026.00
batching ) using 20mm size (SS5) hard blasted granite machine crushed M20 mix M20 mix
graded metal (Coarse aggregate) from approved quarry, using a
minimum quantity of 350 kgs. of cement per 1 cum of concreteincluding
cost and conveyance of all materials like cement, fine aggregate
(Sand), coarse aggregate, water etc., to site and cost of seigniorage
charges on all materials including centering using Steel scaffolding pipes,
jack props, wallers, foot plates, brackets, steel centering plates, etc.,
shuttering , machine mixing, laying concrete, vibrating,lift charges, curing
etc., complete but excluding cost of steel and it’s fabrication charges for
finished item of work (APSS No. 402 & 403) : for Column Pedastal

Page 39 of 222
7 12.50 Vibrated Reinforced Cement Concrete M 20 Design Mix ( by weigh VRCC VRCC 402 & 403 8207.40 Cum 102593.00
batching ) using 20mm size (SS5) hard blasted granite machine crushed M20 mix M20 mix
graded metal (Coarse aggregate) from approved quarry, using a
minimum quantity of 350 kgs. of cement per 1 cum of concreteincluding
cost and conveyance of all materials like cement, fine aggregate
(Sand), coarse aggregate, water etc., to site and cost of seigniorage
charges on all materials including centering using Steel scaffolding pipes,
jack props, wallers, foot plates, brackets, steel centering plates, etc.,
shuttering , machine mixing, laying concrete, vibrating,lift charges, curing
etc., complete but excluding cost of steel and it’s fabrication charges for
finished item of work (APSS No. 402 & 403) : for Column

8 9.50 Vibrated Reinforced Cement Concrete M 20 Design Mix ( by weigh VRCC VRCC 402 & 403 8820.50 Cum 83795.00
batching ) using 20mm size (SS5) hard blasted granite machine crushed M20 mix M20 mix
graded metal (Coarse aggregate) from approved quarry, using a
minimum quantity of 350 kgs. of cement per 1 cum of concreteincluding
cost and conveyance of all materials like cement, fine aggregate
(Sand), coarse aggregate, water etc., to site and cost of seigniorage
charges on all materials including centering using Steel scaffolding pipes,
jack props, wallers, foot plates, brackets, steel centering plates, etc.,
shuttering , machine mixing, laying concrete, vibrating,lift charges, curing
etc., complete but excluding cost of steel and it’s fabrication charges for
finished item of work (APSS No. 402 & 403) : for Plinth Beam

9 15.00 Vibrated Reinforced Cement Concrete M 20 Design Mix ( by weigh VRCC VRCC 402 & 403 7381.95 Cum 110729.00
batching ) using 20mm size (SS5) hard blasted granite machine crushed M20 mix M20 mix
graded metal (Coarse aggregate) from approved quarry, using a
minimum quantity of 350 kgs. of cement per 1 cum of concreteincluding
cost and conveyance of all materials like cement, fine aggregate
(Sand), coarse aggregate, water etc., to site and cost of seigniorage
charges on all materials including centering using Steel scaffolding pipes,
jack props, wallers, foot plates, brackets, steel centering plates, etc.,
shuttering , machine mixing, laying concrete, vibrating,lift charges, curing
etc., complete but excluding cost of steel and it’s fabrication charges for
finished item of work (APSS No. 402 & 403) : for Roof Beams

Page 40 of 222
10 233.00 Vibrated Reinforced Cement Concrete M 20 Design Mix ( by weigh VRCC VRCC 402 & 403 892.30 Sqm 207906.00
batching ) using 20mm size (SS5) hard blasted granite machine crushed M20 mix M20 mix
graded metal (Coarse aggregate) from approved quarry, using a
minimum quantity of 350 kgs. of cement per 1 cum of concreteincluding
cost and conveyance of all materials like cement, fine aggregate
(Sand), coarse aggregate, water etc., to site and cost of seigniorage
charges on all materials including centering using Steel scaffolding pipes,
jack props, wallers, foot plates, brackets, steel centering plates, etc.,
shuttering , machine mixing, laying concrete, vibrating,lift charges, curing
etc., complete but excluding cost of steel and it’s fabrication charges for
finished item of work (APSS No. 402 & 403) : for 125mm thick Slab

11 17.50 Vibrated Reinforced Cement Concrete M 20 Design Mix ( by weigh VRCC VRCC 402 & 403 1140.45 Sqm 19958.00
batching ) using 20mm size (SS5) hard blasted granite machine crushed M20 mix M20 mix
graded metal (Coarse aggregate) from approved quarry, using a
minimum quantity of 350 kgs. of cement per 1 cum of concreteincluding
cost and conveyance of all materials like cement, fine aggregate
(Sand), coarse aggregate, water etc., to site and cost of seigniorage
charges on all materials including centering using Steel scaffolding pipes,
jack props, wallers, foot plates, brackets, steel centering plates, etc.,
shuttering , machine mixing, laying concrete, vibrating,lift charges, curing
etc., complete but excluding cost of steel and it’s fabrication charges for
finished item of work (APSS No. 402 & 403) : for 175mm thick Slab

12 1.00 Reinforced Cement Concrete M 20 Design Mix ( by weigh batching ) RCC M20 RCC M20 402 & 403 8102.35 Cum 8102.00
using 20mm size (SS5) hard blasted granite machine crushed graded mix mix
metal (Coarse aggregate) from approved quarry, using a minimum
quantity of 350 kgs. of cement per 1 cum of concreteincluding cost and
conveyance of all materials like cement, fine aggregate (Sand), coarse
aggregate, water etc., to site and cost of seigniorage charges on all
materials including centering using Steel scaffolding pipes, jack props,
wallers, foot plates, brackets, steel centering plates, etc., shuttering ,
machine mixing, laying concrete, vibrating,lift charges, curing etc.,
complete but excluding cost of steel and it’s fabrication charges for
finished item of work (APSS No. 402 & 403) : for Lintels

Page 41 of 222
13 10.00 Reinforced Cement Concrete M 20 Design Mix ( by weigh batching ) RCC M20 RCC M20 402 & 403 606.75 Sqm 6068.00
using 20mm size (SS5) hard blasted granite machine crushed graded mix mix
metal (Coarse aggregate) from approved quarry, using a minimum
quantity of 350 kgs. of cement per 1 cum of concreteincluding cost and
conveyance of all materials like cement, fine aggregate (Sand), coarse
aggregate, water etc., to site and cost of seigniorage charges on all
materials including centering using Steel scaffolding pipes, jack props,
wallers, foot plates, brackets, steel centering plates, etc., shuttering ,
machine mixing, laying concrete, vibrating,lift charges, curing etc.,
complete but excluding cost of steel and it’s fabrication charges for
finished item of work (APSS No. 402 & 403) : for Sunshades

14 88.50 Filling with useful available excavated earth (excluding rock) in trenches, Filling Filling 309 & 310 199.20 Cum 17629.00
sides of foundations and basement with initial lead in layers not exceeding
15cm thick, consolidating No deposited layer by watering and ramming
including cost and conveyence of water to work site and all operational,
incidental, labour charges, hire charges of T & P etc., complete for
finished item of work. (APSS NO. 309 & 310)

15 119.00 Filling with Gravel in trenches, sides of foundations and basement with Filling Filling 309 & 310 278.70 Cum 33165.00
initial lead in layers not exceeding 15cm thick, consolidating each
deposited layer by watering and ramming including cost and conveyence
of water to the work site and all operational, incidental, labour charges,
seignorage charges, hire charges of T & P etc., complete for finished item
of work. (APSS NO. 309 & 310)
16 53.00 Brick Masonry in superstructure with CM (1:8) prop: using second class Brick Brick 501 & 504 4776.60 Cum 253160.00
bricks from approved source having minimum crushing strength of 40 Masonry Masonry
Kg/Sqcm. including cost and conveyance of all materials like cement,
sand, bricks, water etc., to site, including seigniorage charges, sales &
other taxes on all materials, all operational, incidental and labour charges
such as mixing cement mortar, constructing masonry, scaffolding charges,
lift charges, curing, etc., complete for finished item of work. (APSS No.
501 & 504).
17 4.00 Supply and Fixing of 18guage MS Plain sheet Door of size 1.22 x 2.13 M.S.Doors M.S.Doors As per 6625.00 No 26500.00
mts with outer angular frame of rolled steel equal angle 40 x 40 x 6m and Incharge
inner shutter angular frame rolled steel equal angle 32 x 32 x 4 mm with Engineer
Double leaf shutter,MS Flats 25x5mm-6N

Page 42 of 222
18 11.00 Supply and fixing of 18 guage M.S. Plain Sheet WINDOW of size 1.52 M x M.S. M.S. As per 6723.35 No 73957.00
1.22 M (Six Leafs shutters with outer angular frame of rolled steel equal Windows Windows Incharge
angle ISA 4040 of Size 40mm x 40mm x 6mm and inner shutter angular Engineer
frame of rolled steel equal angle ISA 2525 of size 25mm x 25mm x 5mm
and rolled steel Tee Bars 40mm x 40mm x 6mm and 25x5mm flat , 1
Nos. Horizontal, 2 Nos. verticles also bended with fixtures such as M.S.
Powder coated tower bolts 100mm long 6 Nos., M.S. Powder coated butt
Hinges 12 Nos., M.S. Powder coated handles 125mm long 6 Nos., and
safety rods 10mm MS square rods at 10 Nos welded horizontally to full
width of window & 4 Nos of MS Hold fasts of 230mm long including
redoxide primer grade I quality coating including cost and conveynace of
all materials, labour charges etc., complete for finished item of work.
19 2.00 Supply and Fixing of Ventilator of size 1.52 x 0.3 with 25mm x 25mm x MS MS As per 578.80 No 1158.00
3mm thick equal L angles and 10mm square rods @ 150mm c/c fixing in Ventilator Ventilator Incharge
position ,complete for finsihed item of work Engineer

20 4.00 Supply and Fixing of Ventilator of size 1.22 x 0.3 with 25mm x 25mm x MS MS As per 472.90 No 1892.00
3mm thick equal L angles and 10mm square rods @ 150mm c/c fixing in Ventilator Ventilator Incharge
position ,complete for finsihed item of work Engineer

21 265.00 Ornamental Plastering 12mm thick in two coats with base coat of 8mm Plastering Plastering 901 & 906 285.45 Sqm 75644.00
thick in CM (1:5) and top coat of 4mm thick in CM (1:3) dubara sponge
finish including cost and conveyance of all materials like cement, sand,
water etc., to site, seigniorage charges, sales & other taxes on all
materials,all operational, incidental and labour charges such as mixing
mortar, scaffolding charges, lift charges, including cutting of Grooves
wherever necessary as directed by Engineer - in - charge, finishing,
curing, etc., complete for Even Surfaces of Wall for finished item of
work. (APSS 901,903 & 904)

22 397.00 Plastering 12mm thick in two coats with base coat of 8mm thick in CM Plastering Plastering 901, 903 271.95 Sqm 107964.00
(1:6) and top coat of 4mm thick in CM (1:4) dubara sponge finish & 904
including cost and conveyance of all materials like cement, sand, water
etc., to site, seigniorage charges, sales & other taxes on all materials,all
operational, incidental and labour charges such as mixing mortar,
scaffolding charges, lift charges, including cutting of Grooves wherever
necessary as directed by Engineer - in - charge, finishing, curing, etc.,
complete for Even Surfaces of Wall for finished item of work. (APSS
901,903 & 904)

Page 43 of 222
23 270.00 Plastering 20mm thick in two coats with base coat of 16mm thick in CM Plastering Plastering 901, 903 283.55 Sqm 76559.00
(1:6) and top coat of 4mm thick in CM (1:4) dubara sponge finish & 904
including cost and conveyance of all materials like cement, sand, water
etc., to site, seigniorage charges, sales & other taxes on all materials, all
operational, incidental and labour charges such as mixing
mortar,scaffolding charges, lift charges, finishing,including cutting of
Grooves wherever necessary as directed by Engineer - in - charge,
curing, etc., complete for Uneven Surfaces of Brick Wall for finished item
of work. (APSS 901,903 & 904)

24 15.04 Making Green Chalk Board of size 3.00Mx1.20Mts including border with Green Green 1603 520.00 Sqm 7821.00
plastering in CM (1:2) 12mm thick as base coat and 3mm thick top coat Chalk Chalk
with cement green oxide powder in (1:1) prop. and making border of Board Board
50x20mm thick alround the chalk board over existing plastered surface
and painting the chalk board surface with chalk board paint as per
direction of Engineer-in-Charge including cost and conveyance of all
materials, sales and other taxes on cost of materials and all operational,
incidental and labour charges etc., complete for finished item of work
(APSS No.1603)

25 82.00 Painting to New Iron work with two coats of ready mixed synthetic enamel Painting Painting 1201 & 81.90 Sqm 6716.00
paint first quality all shades having VOC (Volatile Organic Compound ) 1212
content less than 50 grams/ liter over an existing steel primer including
cost and conveyance of all materials to site, sales & other taxes,
incidental, operational and all labour charges etc., complete for finished
item of work. (APSS No. 1201, 1207 & 1212).in All Floors

26 662.00 Whiting to new walls and ceiling in two coats with Birla White or Painting Painting 901 & 908 27.70 Sqm 18337.00
equavalent quality to give an even shade after thoroughly brushing the
surface to remove all loose powdered materials including cost and
conveyance of all materials and water to site, sales & other taxes, all
operational, incidental and labour charges such as cleaning the surface,
painting, curing etc., complete for finished item of work for internal walls.
(APSS No.901 & 908) in All Floors

27 270.00 Painting to New walls with two coats of acrylic exterior emulsion paint Painting Painting 912 120.20 Sqm 32454.00
having VOC (Volatile Organic Compound ) content less than 50 grams/
liter. of superior quality of approved brand and shade over base coat of
cement primer grade -I making three coats in all to give an even shade
after thoroughly brushing the surface to remove all loose powdered
materials, including cost and conveyance of all materials, including cost
and conveyance of all materials, cost of brushes, water to site, etc., sales
& other taxes, all operational, incidental and labour charges such as
scaffolding charges, lift charges, curing etc., complete for finished item of
work in all floors for Walls.(APSS No. 912) in All Floors

Page 44 of 222
28 223.00 Flooring with Polished Black Kadapa slabs minimum of 15 mm thick Flooring Flooring 703 & 701 468.00 Sqm 104364.00
(0.457M x 0.457M) set over a base coat of CM (1:8), 12mm thick (joints
of stone must be flushed) over C.C. bed already laid or R.C.C. roof slab
only after it is properly cured, cleaned, moistered and where
necessary treated with neat grey cement slurry of honey like consistency
spred at3.3 kgs of cement for 1 sqm. and jointed with neat cement paste
to full depth, including cost and conveyance of all materials like cement,
sand, water, flooring stones etc. to site, seigniorage charges, sales and
other taxes on all materials, all operational, incidental and labour charges
such as dressing of flooring stones to the required sizes, mixing of cement
mortar, laying, jointing, curing, lift charges etc., complete for finished
item of work.(APSS No.703 & 701)
29 13.00 Providing skirting to internal walls 12.5 Cm high withPolished Black Skirting Skirting 703 & 701 498.00 Sqm 6474.00
Kadapa slabs minimum of 15 mm thick (0.457M x 0.457M) with length
equal to flooring stones set over a base coat of CM (1:3), 12mm thick
with cement slurry of honey like consistency spread @ 3.3 Kgs per sqm
and jointed with neat cement paste mixed with pigment of matching
shade to full depth (joints of stone should be flushed), including cost and
conveyance of all materials like cement, sand, water, flooring stones etc.
to site, seigniorage charges, sales and other taxes on all materials, all
operational, incidental and labour charges such as dressing of flooring
stones to the required sizes, mixing of cement mortar, laying, jointing,
curing, lift charges etc., complete for finished item of work.(APSS No.701
& 707)

30 22.00 Reinforced cement mortar Facia 5 cm thick in CM (1:3) for drop walls, RCM Facia RCM Facia 703 & 701 1031.70 Sqm 22697.00
Fins & staircase railing with rabbit wire mesh & nominal reinforcement as
directed by Engineer-in-charge with dubara spong finishing including cost
& conveyence of all materials to site, including seigniorage charges, sales
and other taxes on all materials and all operational, incidental charges
such as labour charges, like mixing cement mortar, scaffolding charges,
lift charges, curing, for making 50 mm thick RCM Paradah walls (RCM
Drop walls) including tying Rabbit (chicken) wire mesh to the existing mild
steel / HYSD Steel reinforcement applying mortar lumps, finishing,
plastering to both faces, sponge finishing etc complete for finished item of
work but excluding cost of steel and its fabrication charges in All Floors

Page 45 of 222
31 15.00 Providing High Yield Strength Deformed (HYSD) steel bars (Fe 500 grade HYSD HYSD 126 45731.80 Mt 685977.00
as per IS 1786-1985) of 8mm to 40mm diameters, cutting, bending, to Steel Steel
required sizes and shapes placing in position with cover blocks of
approved size and binding wire of 20SWG, forming grills for reinforcement
work as per approved designs and drawings including cost and
conveyance of bars from approved sources to site of work, including cost
and conveyance of binding wire, cover blocks, chairs, overlaps, spacers,
dowels, wastage etc., and all operational, incidental, and labour charges
such as cutting, bending, placing in position, tying etc., and sales & other
taxes,on cost of all materials complete for finished item of work (APSS
No.126) in all floors.

First Floor
32 4.60 Vibrated Reinforced Cement Concrete M 20 Design Mix ( by weigh VRCC VRCC 402 & 403 8568.50 Cum 39415.00
batching ) using 20mm size (SS5) hard blasted granite machine crushed M20 mix M20 mix
graded metal (Coarse aggregate) from approved quarry, using a
minimum quantity of 350 kgs. of cement per 1 cum of concreteincluding
cost and conveyance of all materials like cement, fine aggregate
(Sand), coarse aggregate, water etc., to site and cost of seigniorage
charges on all materials including centering using Steel scaffolding pipes,
jack props, wallers, foot plates, brackets, steel centering plates, etc.,
shuttering , machine mixing, laying concrete, vibrating,lift charges, curing
etc., complete but excluding cost of steel and it’s fabrication charges for
finished item of work (APSS No. 402 & 403) : for Column

33 6.40 Vibrated Reinforced Cement Concrete M 20 Design Mix ( by weigh VRCC VRCC 402 & 403 7621.55 Cum 48778.00
batching ) using 20mm size (SS5) hard blasted granite machine crushed M20 mix M20 mix
graded metal (Coarse aggregate) from approved quarry, using a
minimum quantity of 350 kgs. of cement per 1 cum of concreteincluding
cost and conveyance of all materials like cement, fine aggregate
(Sand), coarse aggregate, water etc., to site and cost of seigniorage
charges on all materials including centering using Steel scaffolding pipes,
jack props, wallers, foot plates, brackets, steel centering plates, etc.,
shuttering , machine mixing, laying concrete, vibrating,lift charges, curing
etc., complete but excluding cost of steel and it’s fabrication charges for
finished item of work (APSS No. 402 & 403) : for Roof Beams

Page 46 of 222
34 130.00 Vibrated Reinforced Cement Concrete M 20 Design Mix ( by weigh VRCC VRCC 402 & 403 920.90 Sqm 119717.00
batching ) using 20mm size (SS5) hard blasted granite machine crushed M20 mix M20 mix
graded metal (Coarse aggregate) from approved quarry, using a
minimum quantity of 350 kgs. of cement per 1 cum of concreteincluding
cost and conveyance of all materials like cement, fine aggregate
(Sand), coarse aggregate, water etc., to site and cost of seigniorage
charges on all materials including centering using Steel scaffolding pipes,
jack props, wallers, foot plates, brackets, steel centering plates, etc.,
shuttering , machine mixing, laying concrete, vibrating,lift charges, curing
etc., complete but excluding cost of steel and it’s fabrication charges for
finished item of work (APSS No. 402 & 403) : for 125mm thick Slab

35 1.00 Reinforced Cement Concrete M 20 Design Mix ( by weigh batching ) RCC M20 RCC M20 402 & 403 8423.05 Cum 8423.00
using 20mm size (SS5) hard blasted granite machine crushed graded mix mix
metal (Coarse aggregate) from approved quarry, using a minimum
quantity of 350 kgs. of cement per 1 cum of concreteincluding cost and
conveyance of all materials like cement, fine aggregate (Sand), coarse
aggregate, water etc., to site and cost of seigniorage charges on all
materials including centering using Steel scaffolding pipes, jack props,
wallers, foot plates, brackets, steel centering plates, etc., shuttering ,
machine mixing, laying concrete, vibrating,lift charges, curing etc.,
complete but excluding cost of steel and it’s fabrication charges for
finished item of work (APSS No. 402 & 403) : for Lintels

36 7.00 Reinforced Cement Concrete M 20 Design Mix ( by weigh batching ) RCC M20 RCC M20 402 & 403 629.70 Sqm 4408.00
using 20mm size (SS5) hard blasted granite machine crushed graded mix mix
metal (Coarse aggregate) from approved quarry, using a minimum
quantity of 350 kgs. of cement per 1 cum of concreteincluding cost and
conveyance of all materials like cement, fine aggregate (Sand), coarse
aggregate, water etc., to site and cost of seigniorage charges on all
materials including centering using Steel scaffolding pipes, jack props,
wallers, foot plates, brackets, steel centering plates, etc., shuttering ,
machine mixing, laying concrete, vibrating,lift charges, curing etc.,
complete but excluding cost of steel and it’s fabrication charges for
finished item of work (APSS No. 402 & 403) : for Sunshades

37 36.00 Brick Masonry in superstructure with CM (1:8) prop: using second class Brick Brick 501 & 504 5001.90 Cum 180068.00
bricks from approved source having minimum crushing strength of 40 Masonry Masonry
Kg/Sqcm. including cost and conveyance of all materials like cement,
sand, bricks, water etc., to site, including seigniorage charges, sales &
other taxes on all materials, all operational, incidental and labour charges
such as mixing cement mortar, constructing masonry, scaffolding charges,
lift charges, curing, etc., complete for finished item of work. (APSS No.
501 & 504).
Page 47 of 222
38 2.00 Supply and Fixing of 18guage MS Plain sheet Door of size 1.22 x 2.13 mts M.S.Doors M.S.Doors As per 6625.00 No 13250.00
with outer angular frame of rolled steel equal angle 40 x 40 x 6m and Incharge
inner shutter angular frame rolled steel equal angle 32 x 32 x 4 mm with Engineer
Double leaf shutter,MS Flats 25x5mm-6No

39 7.00 Supply and fixing of 18 guage M.S. Plain Sheet WINDOW of size 1.52 M x M.S. M.S. As per 6723.35 No 47063.00
1.22 M (Six Leafs shutters with outer angular frame of rolled steel equal Windows Windows Incharge
angle ISA 4040 of Size 40mm x 40mm x 6mm and inner shutter angular Engineer
frame of rolled steel equal angle ISA 2525

40 1.00 Supply and Fixing of Ventilator of size 1.52 x 0.3 with 25mm x 25mm x MS MS As per 578.80 No 579.00
3mm thick equal L angles and 10mm square rods @ 150mm c/c fixing in Ventilator Ventilator Incharge
position ,complete for finsihed item of work Engineer

41 2.00 Supply and Fixing of Ventilator of size 1.22 x 0.3 with 25mm x 25mm x MS MS As per 472.90 No 946.00
3mm thick equal L angles and 10mm square rods @ 150mm c/c fixing in Ventilator Ventilator Incharge
position ,complete for finsihed item of work Engineer

42 165.00 Ornamental Plastering 12mm thick in two coats with base coat of 8mm Plastering Plastering 901 , 903 314.25 Sqm 51851.00
thick in CM (1:5) and top coat of 4mm thick in CM (1:3) dubara sponge & 904
finish including cost and conveyance of all materials like cement, sand,
water etc., to site, seigniorage charges, sales & other taxes on all
materials,all operational, incidental and labour charges such as mixing
mortar, scaffolding charges, lift charges, including cutting of Grooves
wherever necessary as directed by Engineer - in - charge, finishing,
curing, etc., complete for Even Surfaces of Wall for finished item of
work. (APSS 901,903 & 904)

Page 48 of 222
43 171.00 Plastering 12mm thick in two coats with base coat of 8mm thick in CM Plastering Plastering 901 , 903 298.10 Sqm 50975.00
(1:6) and top coat of 4mm thick in CM (1:4) dubara sponge finish & 904
including cost and conveyance of all materials like cement, sand, water
etc., to site, seigniorage charges, sales & other taxes on all materials,all
operational, incidental and labour charges such as mixing mortar,
scaffolding charges, lift charges, including cutting of Grooves wherever
necessary as directed by Engineer - in - charge, finishing, curing, etc.,
complete for Even Surfaces of Wall for finished item of work. (APSS
901,903 & 904)

44 219.00 Plastering 20mm thick in two coats with base coat of 16mm thick in CM Plastering Plastering 901 , 903 309.75 Sqm 67835.00
(1:6) and top coat of 4mm thick in CM (1:4) dubara sponge finish & 904
including cost and conveyance of all materials like cement, sand, water
etc., to site, seigniorage charges, sales & other taxes on all materials, all
operational, incidental and labour charges such as mixing
mortar,scaffolding charges, lift charges, finishing,including cutting of
Grooves wherever necessary as directed by Engineer - in - charge,
curing, etc., complete for Uneven Surfaces of Brick Wall for finished item
of work. (APSS 901,903 & 904)

45 49.00 Painting to New Iron work with two coats of ready mixed synthetic enamel Painting Painting 1201, 81.90 Sqm 4013.00
paint first quality all shades having VOC (Volatile Organic Compound ) 1207 &
content less than 50 grams/ liter over an existing steel primer including 1212
cost and conveyance of all materials to site, sales & other taxes,
incidental, operational and all labour charges etc., complete for finished
item of work. (APSS No. 1201, 1207 & 1212).in All Floors

46 336.00 Whiting to new walls and ceiling in two coats with Birla White or Painting Painting 901 & 908 27.70 Sqm 9307.00
equavalent quality to give an even shade after thoroughly brushing the
surface to remove all loose powdered materials including cost and
conveyance of all materials and water to site, sales & other taxes, all
operational, incidental and labour charges such as cleaning the surface,
painting, curing etc., complete for finished item of work for internal walls.
(APSS No.901 & 908) in All Floors
47 219.00 Painting to New walls with two coats of acrylic exterior emulsion paint Painting Painting 912 120.20 Sqm 26324.00
having VOC (Volatile Organic Compound ) content less than 50 grams/
liter. of superior quality of approved brand and shade over base coat of
cement primer grade -I making three coats in all to give an even shade
after thoroughly brushing the surface to remove all loose powdered
materials, including cost and conveyance of all materials, including cost
and conveyance of all materials, cost of brushes, water to site, etc., sales
& other taxes, all operational, incidental and labour charges such as
scaffolding charges, lift charges, curing etc., complete for finished item of
work in all floors for Walls.(APSS No. 912) in All Floors

Page 49 of 222
48 110.00 Flooring with Polished Black Kadapa slabs minimum of 15 mm thick Flooring Flooring 703 & 701 490.75 Sqm 53983.00
(0.457M x 0.457M) set over a base coat of CM (1:8), 12mm thick (joints
of stone must be flushed) over C.C. bed already laid or R.C.C. roof slab
only after it is properly cured, cleaned, moistered and where
necessary treated with neat grey cement slurry of honey like consistency
spred at3.3 kgs of cement for 1 sqm. and jointed with neat cement paste
to full depth, including cost and conveyance of all materials like cement,
sand, water, flooring stones etc. to site, seigniorage charges, sales and
other taxes on all materials, all operational, incidental and labour charges
such as dressing of flooring stones to the required sizes, mixing of cement
mortar, laying, jointing, curing, lift charges etc., complete for finished
item of work.(APSS No.703 & 701)

49 7.50 Providing skirting to internal walls 12.5 Cm high withPolished Black Skerting Skerting 701 & 707 523.80 Sqm 3928.00
Kadapa slabs minimum of 15 mm thick (0.457M x 0.457M) with length
equal to flooring stones set over a base coat of CM (1:3), 12mm thick
with cement slurry of honey like consistency spread @ 3.3 Kgs per sqm
and jointed with neat cement paste mixed with pigment of matching
shade to full depth (joints of stone should be flushed), including cost and
conveyance of all materials like cement, sand, water, flooring stones etc.
to site, seigniorage charges, sales and other taxes on all materials, all
operational, incidental and labour charges such as dressing of flooring
stones to the required sizes, mixing of cement mortar, laying, jointing,
curing, lift charges etc., complete for finished item of work.(APSS No.701
& 707)

50 9.50 Reinforced cement mortar Facia 5 cm thick in CM (1:3) for drop walls, RCM Facia RCM Facia 703 & 701 1112.40 Sqm 10568.00
Fins & staircase railing with rabbit wire mesh & nominal reinforcement as
directed by Engineer-in-charge with dubara spong finishing including cost
& conveyence of all materials to site, including seigniorage charges, sales
and other taxes on all materials and all operational, incidental charges
such as labour charges, like mixing cement mortar, scaffolding charges,
lift charges, curing, for making 50 mm thick RCM Paradah walls (RCM
Drop walls) including tying Rabbit (chicken) wire mesh to the existing mild
steel / HYSD Steel reinforcement applying mortar lumps, finishing,
plastering to both faces, sponge finishing etc complete for finished item of
work but excluding cost of steel and its fabrication charges in All Floors

Page 50 of 222
51 6.00 Providing High Yield Strength Deformed (HYSD) steel bars (Fe 500 grade Hysd Steel Hysd Steel 126 46566.55 Mt 279399.00
as per IS 1786-1985) of 8mm to 40mm diameters, cutting, bending, to
required sizes and shapes placing in position with cover blocks of
approved size and binding wire of 20SWG, forming grills for reinforcement
work as per approved designs and drawings including cost and
conveyance of bars from approved sources to site of work, including cost
and conveyance of binding wire, cover blocks, chairs, overlaps, spacers,
dowels, wastage etc., and all operational, incidental, and labour charges
such as cutting, bending, placing in position, tying etc., and sales & other
taxes,on cost of all materials complete for finished item of work (APSS
No.126) in all floors.

52 121.50 Providing impervious coat over RCC roof slab to required slopes with CM Imperviou Imperviou 901 & 903 340.25 Sqm 41340.00
(1:3) prop. 20mm thick (average) mixed with water proofing compound s Coat s Coat
manufactured by reputed manufacturers as approved by Engineer-in-
charge at 1Kg/bag of cement, laid over roof slab when it is green, finished
smooth with a floating coat of neat cement and thread lining at regular
intervals of 45cmx45cm including cost and conveyance of all materials
like cement, sand, water proofing compound, water etc., to site,
seigniorage charges, sales & other taxes on all materials, all operational,
incidental and labour charges such as mixing mortar, laying, rounding off
at junctions of wall and slab, rendering smooth with thread lining, curing,
lift charges, etc., complete for finished item of work (APSS No. 901 &
903).

53 10.03 Making Green Chalk Board of size 3.00Mx1.20Mts including border with Green Green As per 520.00 Sqm 5215.00
plastering in CM (1:2) 12mm thick as base coat and 3mm thick top coat Chalk Chalk Incharge
with cement green oxide powder in (1:1) prop. and making border of Board Board Engineer
50x20mm thick alround the chalk board over existing plastered surface
and painting the chalk board surface with chalk board paint as per
direction of Engineer-in-Charge including cost and conveyance of all
materials, sales and other taxes on cost of materials and all operational,
incidental and labour charges etc., complete for finished item of work
(APSS No.1603)

54 35.00 Supply and fixing of 110mm dia ISI mark PVC rain water spouts of 2.5 PVC Pipe PVC Pipe As per 515.95 Rmt 18058.00
Kg/cm2 pressure including Cost of necessary pvc bends, shoes and Incharge
M.S.clamps and all other accessories and fixing in position including cost Engineer
and conveyance of all materials to site , sei

Electrical

Page 51 of 222
55 60.00 Wiring with 2 runs of 14/0.3mm (1.0 Sqmm) FRLS / HFFR PVC insulated Wiring Wiring As per 483 Point 28980.00
1100V grade as per IS:694/1990 specification for Copper cable in existing Incharge
pipe with 6A / 10A 1 Way 1 Module Modular Switch control with 6 Module Engineer
Hot Dip Galvanized modular type Metal Box covered with 6 Modular Cover
Frame, 3 Plate Jumbo Ceiling Rose including all labour charges etc.,
complete for light, bell, fan and exhaust fan points in Non-Residential
Buildings.Copper wire make:Polycab /RPG / Million / Power Flex / Anchor /
V-Guard.Modular Switch, Socket, Metal box & Cover frame Make:GM
Four-Five / Legrand Arteor / Schneider Zen celo / MK Blenge.Ceiling Rose
Make:Anchor / Gold Medal Olive / Million Zoom.

56 10.00 Supply and Fixing of 20A 2 Module Modular Socket with shutter and 16A / 20A 20A As per 551.5 No 5515.00
20A 1 Way 1 Module Modular Switch duly recessed in wall with 3 Module Modular Modular Incharge
Hot Dip Galvanized Modular Metal Box size covered with 3 Modular Cover Socket Socket Engineer
Frame including earth connections and all

57 10.00 Supply and fixing of 6A / 10A 3/2 Pin 2 Module Modular Socket with 6A 6A As per 246.305 No 2463.00
shutter with 6A / 10A 1 Way 1 Module Modular Switch control on a Modular Modular Incharge
Common switch board with with 3 Module Hot Dip Galvanized Modular Socket Socket Engineer
Metal Box covered with 3 Modular Cover Frame with earth continuity
including wire leads, earth connections along with all labour charges etc.,
complete.Modular Switch, Socket, Metal box & Cover frame Make:GM
Four-Five / Legrand Arteor / Schneider Zen celo / MK Blenge.
58 200.00 Supply and run of 2 of 36/0.3mm (2.5 Sqmm) and one run of 14/0.3mm Copper Copper As per 74.40 Rmt 14880.00
(1.0 Sqmm) flexible copper wire for earthing FRLS / HFFR PVC insulated Cable Cable Incharge
1100V grade as per IS:694/1990 specification for Copper cable in existing Engineer
pipe for mains inlcuding all labour char

59 12.00 Supply of 1 x 36/40W Box type tube light luminaire powder coated CRCA Tube Light Tube Light As per 969.65 No 11636.00
sheet steel housing with Electronic Ballast Chokes and all standard Incharge
accessories with 36/40W tube and Fixing of 20W/18W led tube light Engineer
luminaire on wall / Ceiling with / TW /PVC round blocks with all
accessories including giving connections and all labour charges etc.,
complete. Makes : Wipro / G.E. / Phillips / Crompton / Bajaj .
60 12.00 Supply of 1200 mm (48") sweep 230V, A.C 50 Hz.Ceiling fan with 3 Ceiling Ceiling As per 1717 No 20604.00
Blades and double ball bearings with all standard accessories. Makes: Fan Fan Incharge
Crompton Decora / Bajaj Ultima /Havells Velocity / Usha Astra / Orient Engineer
PSPO.

Page 52 of 222
61 12.00 Labour charges for Fixing of Ceiling fan and regulator including Labour Labour As per 124.8 No 1498.00
transportation and giving connections with twin core wire etc., complete. Charges Charges Incharge
Engineer
62 12.00 Supply of 1 Module Modular type Electronic step type Fan Regulator with 2 Electronic Electronic As per 494.00 No 5928.00
Module Hot Dip Galvanized Modular Metal Box covered with 2 modular step type step type Incharge
cover frame etc., complete.Makes : GM Four-Five / Legrand Arteor / Fan Fan Engineer
SchneiderZen celo / MK Blenge. Regulator Regulator

63 75.00 Supply and Run of 2 of 10 Sq.mm WPSC Aluminium cable along with WPSC WPSC As per 53.23 Rmt 3992.00
No.10 SWG G.I bearer wire through PVC cleats with all accessories Aluminium Aluminium Incharge
including labour charges etc., complete for service mains. cable cable Engineer

64 1.00 Providing independent earthling by excavating a trench to a depth of 2.1 Earthing Earthing As per 2911.00 No 2911.00
M in all soils, as per size specified in the Data, using 40mm dia 'B' class GI Incharge
pipe of 2.5 Mtrs length with necessary accessories with hume pipe ring Engineer
duly providing staggered holes including c/c of all materials such as GI
Pipe, Nuts & Bolts, Hume ring , Salt, Charcoal etc. filling with equal
proportion of Salt and Charcoal in layers and all labour charges etc.,
complete for small quarters.
65 2.00 Supply and fixing of 8 Way SPN DB with IP 43 Protection as per IS:13032 SPN DB SPN DB As per 3293.50 No 6587.00
and suitable for singile phase 6 Nos S.P out goings and for 1No Incommer Incharge
including internal connection and labour charges for flush mounting etc., Engineer
complete.
Incommer: 40A DP Isolator

66 200.00 Supply and Fixing of 25mm outer dia heavy (2.20mm thickness) grade, PVC Pipe PVC Pipe As per 62.02 Rmt 12404.00
FRLS with IS:9537 part 3 regid PVC pipe (ISI MARK) concealed in Roof Incharge
Slabs with all required accessories including masonary work and labour Engineer
charges etc., complete. Makes : Sudhakar / Modi ( ISI mark).

Total 3734178.00
(Rupees thirty Sseven lacs thirty four thousand one hundred and seventy eight only)
Total items one fifty seven (111) only

4063008
114156

Page 53 of 222
 DETAILED ESTIMATE

Name of the work : Improving Infrastructure Facilities to Govt.Polytechnic at Srikakulam (V&M) in Srikakulam
District
Under Nadu - Nedu

Total
Amount
Sl No Description of Item Nos L B H Quanti Units Rate in Rs.
in Rs.
ty
Earth work excavation for foundations and depositing on bank for all lifts and with
an initial lead of 10m including all operational, incidental, labour charges such as
1 shoring, sheeting, planking, strutting etc., complete for finished item of work.
[Ordinary Soil - Manual means - Upto 3m depth]

For Cistern Foundation 1 1 4.00 1.50 0.30 1.80

1 1 2.60 2.60 1.80 12.17
1 4 1.40 1.40 2.00 15.68
Total 29.65 cum 191.10 5,666
Plain Cement Concrete (1:4:8) using 40mm nominal size SS5 hard broken granite
metal including cost and conveyance of all materials like cement, fine aggregate
2 (sand), coarse aggregate, water etc., to site and including all operational, incidental
and labour charges such as machine mixing, laying concrete, curing etc., complete
for finished item of work
For Cistern Foundation 1 1 4.00 1.50 0.10 0.60
1 1 2.60 2.60 0.10 0.68
1 4 1.40 1.40 0.10 0.78
Total 2.06 cum 3179.70 6,550
Vibrated Reinforced Cement Concrete M 20 Design Mix ( by weigh batching )
using 20mm size (SS5) hard blasted granite machine crushed graded metal (Coarse
aggregate) from approved quarry, using a minimum quantity of 350 kgs. of cement
per 1 cum of concreteincluding cost and conveyance of all materials like cement,
3 fine aggregate (Sand), coarse aggregate, water etc., to site and cost of seigniorage
charges on all materials including Steel scaffolding pipes, jack Props, wallers, Foot
plates, brackets, steel Centering Plates, etc., shuttering , machine mixing, laying
concrete, vibrating,lift charges, curing etc., complete but excluding cost of steel and
it’s fabrication charges for finished item of work for foundation, plinth,
Bottom Slab
pedastals(below plinth)(APSS No. 402 &1403) 1 2.60 2.60 6.76
1 1 2.40 2.40 5.76
Total 12.52 cum 7899.45 98,901
VRCC 1:1.5:3 nominal mix (Cement: fine aggregate: coarse aggregate)
corresponding to table 9 of IS 456 using 20mm size graded machine crushed hard
granite metal (coarse aggregate) from approved quarry, using a minimum quantity
4 of 400 Kgs of cement per 1 cum of concrete including cost and conveyance of all
materials like cement, fine aggregate (sand), coarse aggregate, water etc., to site and
including all operational, incidental and labour charges such as machine mixing,
laying concrete, curing, centering, shuttering etc., complete but excluding cost of
steel and its fabrication charges for finished item of work.[RCC Side walls]
Side Walls 1 2 4.50 0.15 1.50 1.01
Total 1.01 cum 9745.70 9,868
Providing Impervious coat to exposed RCC roof slab surface with CM(1:3), 20mm
thick with 1kg of water proof compound per bag of cement laid over roof when it is
5 green including cost and conveyance of all materials all operational, incidental and
labour charges for mixing mortar, laying, rendering smooth and thread lining,
curing, rounding off junctions of wall and slab etc., complete for finished item of
work.
 Side walls 1 1 9.00 1.50 13.50
1 1 2.50 2.10 5.25
Total 18.75 sqm 395.40 7,414
Providing High Yield Strength Deformed (HYSD) steel bars (Fe 415 grade as per IS
1786-1985) of 8mm to 40mm diameters, cutting, bending, to required sizes and
shapes placing in position with cover blocks of approved size and binding wire of
6 20SWG, forming grills for reinforcement work as per approved Designs and
drawings including cost and conveyance of bars from approved sources to site of
work, including cost and conveyance of binding wire, cover blocks, chairs, overlaps,
spacers, dowels, wastage etc., and all operational, incidental, and labour charges
8mmas
such HYSD
cutting,
barsbending, placing in position, tying etc., and
0 sales &
0 other taxes,on
0 0.85
cost
10mm of HYSD
all materials
bars complete for finished item of work (APSS 0 No.126)
0 in0all floors.
0.60
12mm HYSD bars 0 0 0 0.68
Total 2.13 1Mt 49348.45 105,112
Supplying & fixing Ashirvad/Astral flow guard for equivalent CPVC Pipes with
fittings in ground or on wall including cost of tees, elbows, bends, reducers,
couplings, running joints, union flanges, unions etc. with necessary excavation in
8 all types of soils except rock requiring blasting, refilling, chiselling masonry walls
and making good the walls & floors to the original surface and fixing MS clamps on
TW blocks on walls including cost and conveyance of all materials and labour
charges complete for finished item of work[22.20 mm dia CPVC SDR 13.50].
22.20 MM OD Pipe 1 1 160 160.00
Total 160.00 rmt 96.60 15,456
Supplying & fixing Ashirvad/Astral flow guard for equivalent CPVC Pipes with
fittings in ground or on wall including cost of tees, elbows, bends, reducers,
couplings, running joints, union flanges, unions etc. with necessary excavation in
9
all types of soils except rock requiring blasting, refilling, chiselling masonry walls
and making good the walls & floors to the original surface and fixing MS clamps on
TW blocks on walls including cost and conveyance of all materials and labour
charges
28.60 MM complete
OD Pipe for finished item1of work[28.60
1 280mm dia CPVC SDR 13.50].280.00
Total 280.00 rmt 139.75 39,130
Supplying & fixing Ashirvad/Astral flow guard for equivalent CPVC Pipes with
fittings in ground or on wall including cost of tees, elbows, bends, reducers,
couplings, running joints, union flanges, unions etc. with necessary excavation in
10 all types of soils except rock requiring blasting, refilling, chiselling masonry walls
and making good the walls & floors to the original surface and fixing MS clamps on
TW blocks on walls including cost and conveyance of all materials and labour
charges complete for finished item of work[34.90mm ODPipe - SDR 13.5].
34.90 MM OD Pipe 1 1 215 215.00
Total 50.00 rmt 219.30 10,965
VRCC 1:1.5:3 nominal mix (Cement: fine aggregate: coarse aggregate)
corresponding to table 9 of IS 456 using 20mm size graded machine crushed hard
granite metal (coarse aggregate) from approved quarry, using a minimum quantity
of 400 Kgs of cement per 1 cum of concrete including cost and conveyance of all
15 materials like cement, fine aggregate (sand), coarse aggregate, water etc., to site and
including all operational, incidental and labour charges such as machine mixing,
laying concrete, curing, centering, shuttering etc., complete but excluding cost of
steel and its fabrication charges for finished item of work.[FOOTINGS]

Footings 4 1.250 1.250 0.250 1.563

Total 1.56 cum 7899.45 12,343
 VRCC 1:1.5:3 nominal mix (Cement: fine aggregate: coarse aggregate)
corresponding to table 9 of IS 456 using 20mm size graded machine crushed hard
granite metal (coarse aggregate) from approved quarry, using a minimum quantity
16 of 400 Kgs of cement per 1 cum of concrete including cost and conveyance of all
materials like cement, fine aggregate (sand), coarse aggregate, water etc., to site and
including all operational, incidental and labour charges such as machine mixing,
laying concrete, curing, centering, shuttering etc., complete but excluding cost of
steel and its
Columns up fabrication charges for1finished4 item of work.[COLUMNS]
to Ground level 0.23 0.23 1.10 0.23
1 4 0.23 0.23 3.00 0.63
Total 0.87 cum 9745.70 8,455
VRCC 1:1.5:3 nominal mix (Cement: fine aggregate: coarse aggregate)
corresponding to table 9 of IS 456 using 20mm size graded machine crushed hard
granite metal (coarse aggregate) from approved quarry, using a minimum quantity
17 of 400 Kgs of cement per 1 cum of concrete including cost and conveyance of all
materials like cement, fine aggregate (sand), coarse aggregate, water etc., to site and
including all operational, incidental and labour charges such as machine mixing,
laying concrete, curing, centering, shuttering etc., complete but excluding cost of
steel and its fabrication charges for finished item of work.[RCC SLABS 150mm
Bottom Slab
thick] 1 1 2.25 2.25 5.06
Total 5.06 cum 7382.20 37,372
Brick masonry in CM (1:6) with bricks of traditional size 23 x 11 x 7 cm 2nd class
including cost and conveyance of all materials and all labour charges etc., complete
18 for finished item of work for Basement.

Long Walls 1 1 10.00 0.23 1.00 2.300

Total 2.30 cum 5672.64 13,047
Plastering with CM 2 coats, 12mm thick, base coat in CM (1:5), 8mm thick and top
19 coat in CM (1:3), 4mm thick with sponze finishing including cost and conveyance
of all materials and all labour charges etc., complete for walls.
Long Walls 1 2 10.00 0.00 1.50 30.00

1 4 6.00 0.00 1.10 26.40

1 2 7.00 0.00 0.60 8.40

Total 64.80 sqm 367.60 23,820

RCM facia 50mm thick in CM(1:3) for drop walls, fins with rabbit wire mesh &
nomianl reinforcement as directred by Engineer-in-charge with dubara sponge
20 finishing, including cost and conveyance of all materials to site, operational
&incidental, cost and conveyance of cement, wire mesh, water to work site,
centering, scaffolding and form work, lift charges etc., complete for finished item of
work but excluding cost of steel and
Platform 1 its fabrication
1 charges
10.00 for finished1.00
item of 10.00
work
Total 10.00 sqm 1296.45 12,965
Dadooing to walls with ISO accerdiate glazed red or white full body ceramic wall
tiles of make as approved by engineer -in - charge of site not less than 300 x 450
mm / 320 mm x 400 mm set over base coat 12mm thick CM (1:3) base over coat
21 and neat grey cement slurry of honey likr consistency spread at the rate of 3.3 kgs
per sqm and jointed with white cement paste mixed with pigment of matching
shade to matching shade to match the shade of tiles including cost and of all
materials and water to work site, including cost of seigniorage charges on all
materials and all operational incidental and labour charges such as mixing mortar
fixing
OutsideinLong
postion including lift charges
Wall 1 curing 1 etc completed
10.00 for work .1.50 15.00
Total 15.00 sqm 470.05 7,051
 Supply, delivery, and laying of 40 mm OD 8.00 kgs/cm2 HDPE pipe conforming
22 to IS 4984-1995 including transportation charges and all labour charges etc.,
complete.

Supply and fixing of HDPE Pipe 1 1 140 140.00

Total 140.00 rmt 49.00 6,860

Cost, supply and delivery of 75 mm diameter 6.00 kgs/cm2 test pressure
Unplasticised PVC pipes suitable for potable water supplies conforming to IS
4985/200 (3rd revision) as per specifications including labour charges for laying,
23
fixing and commissioning the PVC pipes including couplers/bends/tees etc.,
including fixing with necessary fittings like bends, plugsm couplers, juctions, tees
etc., with solvent jointing as per standard practise including cost and conveyance of
all materials
75 mm PVC to sitefor
Pipe forwaste
finished item
water 1 of work
1 at all floor levels.
32 32.00
pipe line
Total 32.00 rmt 81.80 2,618
Supplying & Fixing 12.7mm NP stop cock Indian make heavy duty including
24 Labour charges (BMW-E.01& E.02))
Taps 1 1 12 12.00
Total 12.00 Nos 463.55 5,563
Supply and fixing 25 MM diameter NB Size Gunmetal Ball valve with SS Ball and
SS Spindle as per Class - I, Indian make heavy type 25 mm NB Size including cost
25
and conveyance of all materials and all labour charges etc., complete for finished
item of work.
25mm ball valve for inlet and 1 6 6.00
outlet control
Total 6.00 Nos 1194.10 7,165
Supplying and fixing NP bib taps of size 12.70mm dia of Indian make Seiko
26 including cost and conveyance of all materials, labour charges etc., complete for
finished item of work in all floors for 400 Grams
NP bib taps of size 12.70mm for 1 10 10.00
400 Grams
Total 10.00 Nos 621.49 6,215
Supplying and fixing PPR Ball valve as per ISI Class - I , Indian make heavy type
28 including cost and conveyance of all materials , labour charges etc. complete for
finished item of work[20mm PPR Ball valve]
Water Supply Line 1 3 3.00
Total 3.00 Nos 235.20 706
Supplying and fixing PPR Ball valve as per ISI Class - I , Indian make heavy type
29 including cost and conveyance of all materials , labour charges etc. complete for
finished item of work[40 mm PPR Ball valve]
Water Supply Line 1 2 2.00
Total 2.00 Nos 505.60 1,011
Earth work excavation and depositing on bank with initial lead of 10m and initial
lift of 3m in Loamy & Clayey Soils like BC Soils, Red Earth & Ordinary Gravelly
Soils ( SS 20-B) including all operational incidental labour charges such as shoring,
30 strutting, sheeting, planking and dewatering including cost of hire charges of T & P,
labour charges etc., complete for finished item of work including seignerage charges
excluding dewatering charges etc., complete for Foundation of Building. (APSS No.
308)
For OHSR (1x4 x1.40x1.40xas 1.00 4 1.40 1.40 2.00 15.68
per site condition)

Total 15.68 cum 191.10 2,996

 Plain Cement Concrete (1:5:10) M5 grade using 40mm nominal size SS5 hard
broken granite metal including cost and conveyance of all materials like cement,
31 fine aggregate (sand), coarse aggregate, water etc., to site and including all
operational, incidental and labour charges such as machine mixing, laying concrete,
curing etc., complete for finished item of work
for OHSR(1x4x1.40x1.40x.10) 1.00 4 1.40 1.40 0.10 0.78

Total 0.78 cum 3040.36 2,384

VRCC 1:1.5:3 nominal mix (Cement: fine aggregate: coarse aggregate)
corresponding to table 9 of IS 456 using 20mm size graded machine crushed hard
granite metal (coarse aggregate) from approved quarry, using a minimum quantity
of 400 Kgs of cement per 1 cum of concrete including cost and conveyance of all
32 materials like cement, fine aggregate (sand), coarse aggregate, water etc., to site and
including all operational, incidental and labour charges such as machine mixing,
laying concrete, curing, centering, shuttering etc., complete but excluding cost of
steel and its fabrication charges for finished item of work.[PEDASTALS]
for OHSR(1x4x038x0.38x0.60) 1 4 0.38 0.38 0.60 0.35

Total 0.35 cum 8405.70 2,913

VRCC 1:1.5:3 nominal mix (Cement: fine aggregate: coarse aggregate)
corresponding to table 9 of IS 456 using 20mm size graded machine crushed hard
granite metal (coarse aggregate) from approved quarry, using a minimum quantity
of 400 Kgs of cement per 1 cum of concrete including cost and conveyance of all
33
materials like cement, fine aggregate (sand), coarse aggregate, water etc., to site and
including all operational, incidental and labour charges such as machine mixing,
laying concrete, curing, centering, shuttering etc., complete but excluding cost of
steel and its fabrication charges for finished item of work.[COLUMNS First Floor]
For OHSR (4x0.23x0.23x3.00 1 4 0.23 0.23 3.00 0.63
First Brace upto Bottom Slab)

Total 0.63 cum 10279.75 6,526

VRCC 1:1.5:3 nominal mix (Cement: fine aggregate: coarse aggregate)
corresponding to table 9 of IS 456 using 20mm size graded machine crushed hard
granite metal (coarse aggregate) from approved quarry, using a minimum quantity
34 of 400 Kgs of cement per 1 cum of concrete including cost and conveyance of all
materials like cement, fine aggregate (sand), coarse aggregate, water etc., to site and
including all operational, incidental and labour charges such as machine mixing,
laying concrete, curing, centering, shuttering etc., complete but excluding cost of
steel
Braceand its fabrication
Beam for OHSR charges for1finished4 item of work.[PLINTH
1.70 0.23 BEAMS] 0.30 0.47
(4x1.70x0.23x0.30)
Total 0.47 cum 10113.95 5,591
VRCC 1:1.5:3 nominal mix (Cement: fine aggregate: coarse aggregate)
corresponding to table 9 of IS 456 using 20mm size graded machine crushed hard
granite metal (coarse aggregate) from approved quarry, using a minimum quantity
35 of 400 Kgs of cement per 1 cum of concrete including cost and conveyance of all
materials like cement, fine aggregate (sand), coarse aggregate, water etc., to site and
including all operational, incidental and labour charges such as machine mixing,
laying concrete, curing, centering, shuttering etc., complete but excluding cost of
steel and its fabrication charges for finished item of work.[BEAMS]
Brace Beam for OHSR 1 4 1.70 0.23 0.30 0.47
(4x1.70x0.23x0.30)
Total 0.47 cum 8155.45 5,591
 VRCC 1:1.5:3 nominal mix (Cement: fine aggregate: coarse aggregate)
corresponding to table 9 of IS 456 using 20mm size graded machine crushed hard
granite metal (coarse aggregate) from approved quarry, using a minimum quantity
of 400 Kgs of cement per 1 cum of concrete including cost and conveyance of all
36 materials like cement, fine aggregate (sand), coarse aggregate, water etc., to site and
including all operational, incidental and labour charges such as machine mixing,
laying concrete, curing, centering, shuttering etc., complete but excluding cost of
steel and its fabrication charges for finished item of work.[BEAMS First Floor]
Brace Beam for OHSR 1 4 1.70 0.23 0.30 0.47
(4x1.70x0.23x0.30)
Total 0.47 cum 9103.80 4,272
VRCC 1:1.5:3 nominal mix (Cement: fine aggregate: coarse aggregate)
corresponding to table 9 of IS 456 using 20mm size graded machine crushed hard
granite metal (coarse aggregate) from approved quarry, using a minimum quantity
37 of 400 Kgs of cement per 1 cum of concrete including cost and conveyance of all
materials like cement, fine aggregate (sand), coarse aggregate, water etc., to site and
including all operational, incidental and labour charges such as machine mixing,
laying concrete, curing, centering, shuttering etc., complete but excluding cost of
steel and its fabrication charges for finished item of work.[RCC SLABS 115mm
For OHSR Staircase mid Landing 1
thick] 1 2.30 2.30 5.29
(1x1x1.2x0.60)
Total 5.29 Sqm 932.50 4,933
VRCC 1:1.5:3 nominal mix (Cement: fine aggregate: coarse aggregate)
corresponding to table 9 of IS 456 using 20mm size graded machine crushed hard
granite metal (coarse aggregate) from approved quarry, using a minimum quantity
38 of 400 Kgs of cement per 1 cum of concrete including cost and conveyance of all
materials like cement, fine aggregate (sand), coarse aggregate, water etc., to site and
including all operational, incidental and labour charges such as machine mixing,
laying concrete, curing, centering, shuttering etc., complete but excluding cost of
steel and its fabrication charges for finished item of work.[RCC SLABS 115mm
For
thickOHSR Staircase mid Landing 1
First Floor] 1 2.30 2.30 5.29
(1x1x1.2x0.60)
1 1 5.80 0.60 3.48
Total 8.77 Sqm 973.65 8,539
VRCC 1:1.5:3 nominal mix (Cement: fine aggregate: coarse aggregate)
corresponding to table 9 of IS 456 using 20mm size graded machine crushed hard
granite metal (coarse aggregate) from approved quarry, using a minimum quantity
of 400 Kgs of cement per 1 cum of concrete including cost and conveyance of all
39 materials like cement, fine aggregate (sand), coarse aggregate, water etc., to site and
including all operational, incidental and labour charges such as machine mixing,
laying concrete, curing, centering, shuttering etc., complete but excluding cost of
steel and its fabrication charges for finished item of work.[RCC SLABS 200mm
thick First Floor]
For OHSR(2.30x2.30) 1 4 2.30 1.20 0 11.04
Total 11.04 Sqm 1417.80 15,653
Ornamental Ceiling plastering with CM (1:3), 12mm thick including cost and
40 conveyance of all materials and all labour charges etc., complete.

For OHSR Columns Allround 1 0 0 0 25.00

Total 25.00 sqm 383.29 9,582

Ornamental Ceiling plastering with CM (1:3), 12mm thick including cost and
41 conveyance of all materials and all labour charges etc., complete.[Ceiling Plastering
with CM (1:3), 12mm thick in First Floor]
 For OHSR Columns Allround ) 2 2 10 1 20.00

Total 20.00 sqm 424.48 8,490

Providing Impervious coat to exposed RCC roof slab surface with CM(1:3), 20mm
thick with 1kg of water proof compound per bag of cement laid over roof when it is
42 green including cost and conveyance of all materials all operational, incidental and
labour charges for mixing mortar, laying, rendering smooth and thread lining,
curing, rounding off junctions of wall and slab etc., complete for finished item of
work.[Providing
For OHSR InsideImpervious
(1x1x8x1.2)coat in First Floor] 0 0 0 40.00

Total 40.00 sqm 427.80 17,112

Painting to New walls with two coats of acrylic emulsion paint weather proof
waterbased, modified acrylic with silicon additives exterior grade having VOC
(Volatile Organic Compound ) content less than 50 grams/ liter of superior quality
43 of approved brand and shade over base coat of cement primer grade -I making three
coats in all to give an even shade after thoroughly brushing the surface to remove all
loose powdered materials, including cost and conveyance of all materials, including
cost and conveyance of all materials, cost of brushes, water to site, etc., sales &
Outside
other taxes, all operational, incidental
1 and labour
4 charges such
6 as scaffolding
0 2 36.00
charges,
Total lift charges, curing etc., complete for finished item of work in all floors36.00
for sqm 200.70 7,225
Walls.(APSS No. 911)
Provision for UV Purifierin Ground Floor EXTERNAL 250000
43
43 Provision for borewell 200000
Total 996056.73

Asst.Engineer Dy.Executive Engineer Executive Engineer

APEWIDC, Srikakulam APEWIDC, Srikakulam APEWIDC, Srikakulam
 DETAILED ESTIMATE for Electrification
Name of the work : Improving Infrastructure Facilities to Govt.Polytechnic at Srikakulam (V&M) in
Srikakulam District
Under Nadu - Nedu

Total Rate in Amount in

SLNo Description of Item No L B H Units
Quantity Rs. Rs.
1 Supply and fixing of 25mm dia 1.8mm thick P.V.C. pipe (ISI Mark) concealed in
wall with all required accessories including masonary work and labour charges etc.,
complete.

For class rooms 1 56 56

Total 56 mtr 83.39 4,670
2 Supply and run of 1 of 22 /0.3mm (1.5 Sq.mm) FRLS / HFFR / ZHFR P.V.C.
insulated flexible copper cable in existing conduit pipe for earth continuity including
all labour charges etc., complete.
Makes of wires : Makes: Finolex / RR kabel / Havells /KEI

For class rooms 1 60 0 0 60

Total 60 mtr 24.77 1,486
3 Supply and run of 2 of 36/0.3mm (2.5 Sq.mm) FRLS. P.V.C. insulated flexible
copper cable in existing pipe for mains including all labour charges etc., complete.

1 80 0 0 80
Total 80 mtr 107.93 8,635
4 Supply and run of 2 of 56/0.3mm (4 Sq.mm) FRLS. P.V.C. insulated flexible copper
cable in existing pipe for mains including all labour charges etc., complete.

From TPN to SB 1 100 0 0 100

Total 100 mtr 154.40 15,440
5 Supply and run of 2 of 84/0.3mm (6.0 Sqmm) FRLS. P.V.C. insulated flexible
copper cable in existing pipe for mains including all labour charges etc., complete.

From TPN to SB 1 58 0 0 58
Total 58 mtr 221.66 12,856
6 Wiring with 2 runs of 22/0.3mm ( 1.5 Sq.mm) FRLS / HFFR / ZHFR P.V.C.
insulated 1100V grade as per IS : 694 / 1990 specification flexible copper cable (ISI
MARK) in existing pipe with 6A Modular switch, Ceiling rose/BH/SBH Modular
switches with cover plate including all labour charges etc., complete for Light, Fan,
Exhaust Fan etc., complete.

in class rooms 1 60 0 0 60
Total 60 Nos 699.87 41,992
7 Supply and fixing of 6A 3 pin wall plug socket with a 6A switch control on a
common switch board with earth continuity including wire leads, earth connections
along with all labour charges etc., complete.

in class rooms 1 600 600

in office 1 8 8
Total 608 Nos 1007.77 612,721
8 Supply and fixing of 16A 3pin flush type switch socket combined (2 in 1) duly
recessed in wall with wooden deep box of 6x8x21/2 size covered with hylam sheet
including earth connections and all labour charges etc., complete.

16A 3 Pin Socket 1 100 100

Total 100 Nos 911.19 91,119
10 Supply, Transportaton, and fixing of 20W, T8,1200mm length LED retrofit tube
light, input voltage AC 220 - 260 Volts with PF>0.9, Surge protection:
2KV,THD<10%, with inbuilt driver and frosted cover CCT: 3000K - 5700K,
minimum CRI>70, .etc., completes including all labour charges and conveyance of
all materials etc complete with with flexible wire and connections.

Tube Light Set 1 243 243

Total 243 Nos 1051.6 255,544
11 Supply and Transportation of 1x40W patty type tube light luminaire with copper
choke, starter etc., including 1 No. 40W tube etc., complete.

Tube Light Set 1 5 5

Total 5 Nos 450 2,250
12 Supply and Fixing of batten holder/angle holder on existing block with 7.0W LED
bulb and all labour charges etc., complete. In lieu of ceiling rose.

Holders with Bulb 20 1 20

Total 20 Nos 90.9 1,818
13 Supply and transportation of 60 W LED Street light Luminaire made of pressure
diecast alluminium body with powder coated, having protective toughned glass

LED Street light Luminaire 1 8 8

Total 8 Nos 7314 58,513
14 Supply of 1200mm (48) Sweep 230V, A.C 50 Hz Ceiling Fan with 3 blades and
double ball bearings with all standard accseeories.

Ceiling Fan 174 1 174

Total 174 Nos 2665 463,781
15 Supply and fixing of1 Module Modular type Electronic step type Fan Regulator. in
the existing switch board.

Fan Regulator 174 1 174

Total 174 Nos 231 40,131
16 Labour charges for fixing of ceiling fan and regulator including transportation and
giving connections with twin core wire etc., complete.

Labour charges for fixing of 174 1 174

ceiling
Total fan 174 Nos 156.79 27,281
17 Supply of fresh air exhaust fan of light duty 250V A.C 50 Hz., 225mm (9)
1350R.P.M. Metallic body plastic blades, wire mesh, etc., complete. Makes:
Crompton / Almounard / Havells Turbo Force.

Exhaust Fan 3 1 3
Total 3 Nos 3186.9 9,561
18 Labour charges for fixing of exhaust fan in wall with necessary connections and
masonary work of making hole, finishing etc., complete.

Labour Charges for Exhaust Fan 3 1 3

Total 3 Nos 690.78 2,072
19 Supply of the 3.5 Core 25.00 Sq.mm. PVC XLPE armoured cable 1100 V. Grade
with ISI mark stranded / solid, aluminimum conductor complete

From pole to Meter Board 1 60 60

Total 50 rmt 239 11,930
20 Supply and fixing of (8 +12) 4 Way TPN DB Horizontal with IP 43 Protection
suitable for 12Nos S.P. out goings and Supply and Fixing of 1 No., of 32A FP MCB
as incomer and 12 Nos 6-32 A 10kA SP MCBs for 1 No 4 pole Incommer etc
complete as per IS 8623; IS 13032; IEC 61439-3 Makes: Legrand(Ekinox 3) /
Schneider-Acti9/Hager -Novello+/ Seimens/Crabtree Xpro classique-II/L&T-
DistributionasBoard
Newrange 1
out goings including internal 2
connections 2
and labour charges for
FLUSH
Total Mounting etc., complete. ( Power Dbs) 2 Nos 9649.89 19,300
21 8WAY SPN DB with IP43nProtection suitable for 8Nos S.P out goings and Supply
and fixing 40A DP Isolator as Incommer and 6Nos 6-32A 10KA SP MCBs as
outgongs etc complete as per IS 8623; IS 13032; IEC 61439-3. Makes:
Legrand(Ekinox 3) / Schneider-Acti9/Hager -Novello+/ Seimens/Crabtree Xpro
classique-II/L&T-Newrange ., concealing in wall etc complete.
Distribution Board 2 1 0 0 2
Total 2 Nos 4734.91 9,470
22 Providing independent earthling by excavating a trench to a depth of 2.5 M in all
soils, as per size specified in the Data, using 40mm GI B Class Pipe of 2.5 Mtrs
length with necessary accessories duly providing staggered holes including filling
with equal proportion of Salt and Charcoal in layers and all labour charges etc.,
complete.
Earthing 2 1 2
Total 2 Nos 4586.64 9,173
23 Supply and Fixing of 3 phase meter box, 100 A fuse units, Neutral link, on T.W
block with all accessaries etc., complete for finished items of work.

3 phase meter box, 100 A fuse 1 1 0 0 1

units
Total 1 Nos 520 520
24 Supply, Transportation and fixing of 1 x 36/40 W fluorescent street light luminaire
with sheet alluminium housing and UV stabilised acrylic cover with Electronic
ballast with all standard accessories including 1.0 Mtr 25mm dia 'B' Class GI pipe
bracket, anti tilting MS flat, required twin core wire including 40W tube and
connections etc., complete. Makes: Phillips / Crompton / Bajaj / HPL/Surya
5 1 0 0 5
Total 5 Nos 2037 10,186

Total 1710449

Asst.Engineer Dy.Executive Engineer Executive Engineer

APEWIDC, Srikakulam APEWIDC, Srikakulam APEWIDC, Srikakulam
 DETAIL CUM ABSTRACT ESTIMATE For Minor and Major Repairs
Name of the work : Improving Infrastructure Facilities to Govt.Polytechnic at Srikakulam (V&M) in
Srikakulam District
Under Nadu - Nedu

SNo Description of work No L B D Qty Rate Per Amount

Flooring with Double charged / multi charged stain free full body
porcelain vitrified tiles with double layer pigment of size 600
x 600 mm and thickness between 8-10 mm 1st quality
1 conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of
any colour and finish in all shades and designs with pigment of matching shade including
cost and conveyance of all materials like cement, sand, water, tiles, etc. to site, seigniorage
charges, sales and other taxes on all materials, C921 such as mixing of cement mortar, laying
in position, curing, lift charges etc., complete for finished item of work (APSS No.701 &
Groundfloor
707) in AllComputer
left wing: Floors room 1 1 12.00 7.60 91.20
Auditorium 1 1 18.84 7.60 143.18
L6 1 1 9.10 7.60 69.16
corridor 1 1 37.20 2.70 100.44
Rightwing: Phy. lab 1 1 3.00 7.60 22.80
L5 1 1 9.00 7.60 68.40
L4 1 1 9.00 7.60 68.40
NCC room 1 1 6.00 7.60 45.60
Sports room 1 1 3.00 7.60 22.80
co-op stores 1 1 3.50 7.60 26.60
L3 1 1 5.30 7.60 40.28
corridor 1 1 42.00 2.70 113.40
Rear wing: L7 1 1 6.00 9.10 54.60
L8 1 1 6.00 9.10 54.60
L9 1 1 6.00 9.10 54.60
Phy lab 1 1 6.00 9.10 54.60
General section 1 1 2.85 9.10 25.94
chemistry lab 1 1 8.90 9.10 80.99
corridor 1 1 42.00 2.70 113.40
entry 1 1 9.00 8.00 72.00
verandah 2 1 62.00 2.40 297.60
verandah 2 1 62.00 2.40 297.60
for hostel 1 1 7.50 18.00 135.00
CCP Main block 1 1 36.00 7.00 252.00
127.01
2432.20 1076.30 1Sqm 2617777
Flooring with Double charged / multi charged stain free full body
porcelain vitrified tiles with double layer pigment of size 600
2 x 600 mm and thickness between 8-10 mm 1st quality
conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of
any colour and finish in all shades and designs with pigment of matching shade including
FIRST
cost andFLOOR
conveyance of all materials like cement, sand, water, tiles, etc. to site, seigniorage
charges,
Leftwing :sales
DCCPand other taxes on
HOD 1 all materials,
1 9.20C921 such as mixing71.76
7.80 of cement mortar, laying
in position,
civil HOD curing, lift charges
1 etc.,1complete
5.90 for finished
7.80 item of work (APSS No.701 &
46.02
707) in All Floors
Mechanical HOD 1 1 5.90 7.80 46.02
Electrical HOD 1 5.90 7.80 46.02
Principal room 1 1 8.10 7.80 63.18
office room 1 1 9.30 7.80 72.54
corridor 1 1 37.20 2.00 74.40
1 1 12.30 7.80 95.94
Rightwing : Comp room
storeroom 1 1 2.50 7.80 19.50
IRC Room 1 1 6.55 7.80 51.09
 L2 1 1 9.20 7.80 71.76
L1 1 1 9.20 7.80 71.76
corridor 1 1 42.00 2.70 113.40
1 1 18.80 9.30 174.84
Rearwing : Drawing hall
communication lab 1 1 6.20 9.30 57.66
library 1 1 6.20 9.30 57.66
storeroom 1 1 3.50 9.30 32.55
corridor 1 1 42.00 2.70 113.40
entry 1 1 9.00 8.00 72.00
148.5
1500.00
1500.00 1112.50 1Sqm 1668750
Providing Skirting with Double charged / multi charged stain free full body porcelain
vitrified tiles and polished of size 600 x 600 mm and thickness between 8-10 mm 1st quality
of any size of brand as approved by Engineer - in - charge and set over a base coat of CM
3 (1:5), 12mm thick and neat cement paste at the rate of 3.3 Kg/Sqmt. and jointed with white
cement paste mixed with pigment of matching shade including cost and conveyance of all
materials like cement, sand, water, tiles, etc. to site, seigniorage charges, sales and other
taxes on all materials such as mixing of cement mortar, laying in position, curing, lift charges
etc., complete for finished item of work (APSS No.701 & 707) in All Floors
Groundfloor
left wing: Computer room 1 1 39.20 0.10 3.92
Auditorium 1 1 52.88 0.10 5.29
L6 1 1 33.40 0.10 3.34
corridor 1 1 79.80 0.10 7.98
Rightwing: Phy. lab 1 1 21.20 0.10 2.12
L5 1 1 33.20 0.10 3.32
L4 1 1 33.20 0.10 3.32
NCC room 1 1 27.20 0.10 2.72
Sports room 1 1 21.20 0.10 2.12
co-op stores 1 1 22.20 0.10 2.22
L3 1 1 25.80 0.10 2.58
corridor 1 1 89.40 0.10 8.94
Rear wing: L7 1 1 30.20 0.10 3.02
L8 1 1 30.20 0.10 3.02
L9 1 1 30.20 0.10 3.02
Phy lab 1 1 30.20 0.10 3.02
General section 1 1 23.90 0.10 2.39
chemistry lab 1 1 36.00 0.10 3.60
corridor 1 1 89.40 0.10 8.94
entry 1 1 34.00 0.10 3.40
Deduct Doors -1 20 1.20 0.10 -2.40
verandah 2 1 70.00 0.10 14.00
verandah 2 1 70.00 0.10 14.00
for hostel 1 1 51.00 0.10 5.10
CCP Main block 1 1 84.00 0.10 8.40
14.12
131.50 1071.85 1Sqm 140948
Providing Skirting with Double charged / multi charged stain free full body porcelain
vitrified tiles and polished of size 600 x 600 mm and thickness between 8-10 mm 1st quality
of any size of brand as approved by Engineer - in - charge and set over a base coat of CM
(1:5), 12mm thick and neat cement paste at the rate of 3.3 Kg/Sqmt. and jointed with white
4 cement paste mixed with pigment of matching shade including cost and conveyance of all
materials like cement, sand, water, tiles, etc. to site, seigniorage charges, sales and other
taxes on all materials such as mixing of cement mortar, laying in position, curing, lift charges
etc., complete for finished item of work (APSS No.701 & 707) in All Floors
 FIRST FLOOR
Leftwing : DCCP HOD 1 1 34.00 0.10 3.40
civil HOD 1 1 27.40 0.10 2.74
Mechanical HOD 1 1 27.40 0.10 2.74
Electrical HOD 1 27.40 0.10 2.74
Principal room 1 1 31.80 0.10 3.18
office room 1 1 34.20 0.10 3.42
corridor 1 2 78.40 0.10 15.68
1 1 40.20 0.10 4.02
Rightwing : Comp room
storeroom 1 1 20.60 0.10 2.06
IRC Room 1 1 28.70 0.10 2.87
L2 1 1 34.00 0.10 3.40
L1 1 1 34.00 0.10 3.40
corridor 1 2 89.40 0.10 17.88
1 1 56.20 0.10 5.62
Rearwing : Drawing hall
communication lab 1 1 31.00 0.10 3.10
library 1 1 31.00 0.10 3.10
storeroom 1 1 25.60 0.10 2.56
corridor 1 2 89.40 0.10 17.88
Lobby 1 1 34.00 0.10 3.40
Deduct Doors -1 20 1.20 0.10 -2.40
14.21
115.00 1108.10 1Sqm 127432
Flooring with Supply of high strength Cement Concrete terrazzo/prepolished/chequered Step
tiles with edge rounded and
grooved conforming to IS: 13801 using aggregates, cement,pigments of any premium colour,
design and of 25mm thickness including cost and conveyance of all materials like cement,
5 sand, water, tiles, etc. to site, seigniorage charges, sales and other taxes on all materials such
as mixing of cement mortar, laying in position, curing, lift charges etc., complete for finished
item of work (APSS No.701 & 707) in All Floors

Ground floor
pathways 1 1 90.00 1.80 162.00
for steps 2 12 1.50 0.45 16.20
sides 2 2 0.30 0.15 0.18
for mid landing 1 1 3.00 1.50 4.50
at portico 1 1 4.00 3.60 14.40
14.72
212.00 834.00 1Sqm 176808
Flooring with Supply of high strength Cement Concrete terrazzo/prepolished/chequered Step
tiles with edge rounded and
6 grooved conforming to IS: 13801 using aggregates, cement,pigments of any premium colour,
design and of 25mm thickness including cost and conveyance of all materials like cement,
sand, water, tiles, etc. to site, seigniorage charges, sales and other taxes on all materials such
as mixing of cement mortar, laying in position, curing, lift charges etc., complete for finished
First
item offloor
work (APSS No.701 & 707) in All Floors

2 12 1.50 0.45 16.20

for steps

2 2 0.30 0.15 0.18

sides
 1 1 3.00 1.50 4.50
for mid landing
7.06
27.94 869.00 1Sqm 24281
Dismantling, clearing away and carefully stacking useful materials for re-
use and disposal of unserviceable materials with 100m lead as directed by
1 Executive Engineer duly taking actual premeasurements before
dismantling including all labour charges , overheads & contractor profit
etc., complete [Brick masonry] AS per STMS NADU-NEDU

block 1 F0r walls 1 2 15.35 0.23 3.35 23.65

block 2 & 3 F0r walls 2 2 7.10 0.23 3.35 21.88
0.47
46.00 315.20 1 cum 14499
Dismantling, clearing away and carefully stacking useful materials for re-
use and disposal of unserviceable materials with 100m lead as directed by
Executive Engineer duly taking actual premeasurements before
3
dismantling including all labour charges , overheads & contractor profit
etc., complete [Stone masonry in cement mortar] AS per STMS NADU-
NEDU
block 1 F0r walls 1 2 15.35 0.45 1.00 13.82
cross walls 3 1 7.10 0.45 1.00 9.59
1 1 18.95 0.45 1.00 8.53
31.94 468.00 1 cum 14948
Dismantling, clearing away and carefully stacking useful materials for re-
use and disposal of unserviceable materials with 100m lead as directed by
Executive Engineer duly taking actual premeasurements before
3 dismantling including all labour charges , overheads & contractor profit
etc., complete [Unreinforced cement concrete up to 15cm thickness] AS
per STMS NADU-NEDU

For building 1 1 1 14.85 9.15 0.10 13.59

2&3 2 1 7.30 9.15 0.10 13.36
0.05
27.00 1229.76 1 cum 33204
Earth work excavation and depositing on bank with initial lead of 10m and
initial lift of 3m in Loamy & Clayey Soils like BC Soils, Red Earth &
Ordinary Gravelly Soils ( SS 20-B) including all operational incidental
labour charges such as shoring, strutting, sheeting, planking and
4 dewatering including cost of hire charges of T & P, labour charges etc.,
complete for finished item of work including seignerage charges excluding
dewatering charges etc., complete for Foundation of Building.(APSS No.
308)
For pathway 1 2 80.00 0.30 0.30 14.40
For ramp 1 2 15.00 0.45 0.45 6.08
1 2 3.00 0.45 0.45 1.22
21.70 152.90 1 cum 3318

Plain Cement Concrete corresponding to M5 grade as per IS 456

equivalent to (1:5:10) proportion nominal mix (cement: fine aggregate:
Coarse aggregate) using 40mm size Hard Blasted Granite (IS383, 1970)
metal from approved quarry including cost and conveyance of all materials
5 like cement, sand, coarse aggregate, water etc. to site, including
seigniorage charges, sales & other taxes on all materials, all operational,
incidental, and labour charges such as mixing, laying and ramming
concrete in layers in position not exceeding 15cm, finishing top surface,
curing concrete, etc., complete for finished item of work for Foundations
and Flooring Bed (APSS No. 402)
For pathway 1 2 80.00 0.30 0.10 4.80
 For ramp 1 2 15.00 0.45 0.10 1.35
1 2 3.00 0.45 0.10 0.27
1 1 80.00 1.80 0.10 14.40
20.82 3268.32 1 cum 68046

Brick Masonry in superstructure with CM (1:6) prop: using Fly ASH

Bricks of size 290x225x140mm with compressive of 50 Kgs / Sqcm from
approved source including cost and conveyance of all materials like
cement, sand, fly ash bricks, water etc., to site, including seigniorage
6
charges, sales & other taxes on all materials, all operational, incidental and
labour charges such as mixing cement mortar, constructing masonry,
scaffolding charges, lift charges, curing, etc., complete for finished item of
work. (APSS No. 501 & 504).
for partition long walls 1 1 6.60 0.23 3.35 5.09
for partitions walls 1 2 2.70 0.230 3.35 4.16
0.75
10.00 4769.55 1 cum 47696
Providing impervious coat over RCC roof slab to required slopes with CM
(1:3) prop. 20mm thick (average) mixed with water proofing compound
manufactured by reputed manufacturers as approved by Engineer-in-
charge at 1Kg/bag of cement, laid over roof slab when it is green, finished
7 smooth with a floating coat of neat cement and thread lining at regular
intervals of 45cmx45cm including cost and conveyance of all materials
like cement, sand, water proofing compound, water etc., to site,
seigniorage charges, sales & other taxes on all materials, all operational,
incidental and labour charges such as mixing mortar, laying, rounding off
For buildingof
at junctions 1 wall and slab, rendering
1 1 smooth
15.95 with
9.80
thread -lining,156.31
curing,
block 4 1 1 27.00 9.80
lift charges, etc., complete for finished item of work (APSS - No. 264.60
901 &
903). 420.91 350.10 1 SQM 147361
Ornamental Plastering 12mm thick in two coats with base coat of 8mm
thick in CM (1:5) and top coat of 4mm thick in CM (1:3) dubara sponge
finish including cost and conveyance of all materials like cement, sand,
water etc., to site, seigniorage charges, sales & other taxes on all
8 materials,all operational, incidental and labour charges such as mixing
mortar, scaffolding charges, lift charges, including cutting of Grooves
wherever necessary as directed by Engineer - in - charge, finishing,
curing, etc., complete for Even Surfaces of Wall for finished item of
work. (APSS 901,903 & 904)

For Ceiling 2 1 7.30 - 6.60 96.36

3.64
100.00 327.54 1 SQM 32754

Plastering 12mm thick in two coats with base coat of 8mm thick in CM
(1:6) and top coat of 4mm thick in CM (1:4) dubara sponge finish
including cost and conveyance of all materials like cement, sand, water
etc., to site, seigniorage charges, sales & other taxes on all materials,all
9 operational, incidental and labour charges such as mixing mortar,
scaffolding charges, lift charges, including cutting of Grooves wherever
necessary as directed by Engineer - in - charge, finishing, curing, etc.,
complete for Even Surfaces of Wall for finished item of work. (APSS
901,903 & 904)
for partition long walls 1 1 6.60 3.35 22.11
for partitions walls 1 2 2.70 3.35 18.09
Inside 2 1 27.80 - 3.35 186.26
compound wall 1 1 38.00 3.60 136.80
6.74
370.00 313.85 1 SQM 116125
 Plastering 20mm thick in two coats with base coat of 16mm thick in CM
(1:6) and top coat of 4mm thick in CM (1:4) dubara sponge finish
including cost and conveyance of all materials like cement, sand, water
etc., to site, seigniorage charges, sales & other taxes on all materials, all
10 operational, incidental and labour charges such as mixing
mortar,scaffolding charges, lift charges, finishing,including cutting of
Grooves wherever necessary as directed by Engineer - in - charge, curing,
etc., complete for Uneven Surfaces of Brick Wall for finished item of
work. (APSS 901,903 & 904)

block 1 1 1 10.95 - 4.00 43.80

Basement alround outside 1 1 40.20 - 0.45 18.09
28.11
90.00 332.45 1 SQM 29921

Flooring with Non-skid red or white full body Ceramic floor tiles of size
300 x 300 mm and thickness between 7-8 mm 1st quality conforming to
IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all
shades and designs as approved by Engineer-in-charge, set over base coat
11 of cement mortar (1:8), 12mm thick using screened sand over CC bed
already laid or RCC roof slab, including neat cement slurry of honey like
consistency spread @ 3.3 Kgs per sqm & jointed neatly with white cement
paste to full depth mixed with pigment of matching shade, including cost
of all materials like cement, screened sand , water and tiles etc., and
Toilet
overheads & contractors profit2complete
1 for 6.20 3.12
finished item of- work.38.69
(APSS
No.701 & 707) 2 1 2.40 1.80 - 8.64
Passage 2 1 5.50 1.80 - 19.80
2 4 1.80 0.45 6.48
0.76
74.37 729.45 1 sqm 54249

Providing dadooing to walls with sglazed full body porcelain wall tiles of
size 300 x 600 mm with any type of design texture such as marble finish,
wooden, bamboo, stone finishes etc., scratch less, stain free and thickness
between 6-8 mm 1st quality conforming to IS:13711, IS:13712, IS:13630
(Parts 1 to 15) of any colour and finish in all shades and designs with
12 borders and design as per the approved pattern as approved by Engineer-
in-Charge set over base coat of CM(1:5) 12 mm thick using screened sand
with cement slurry of honey like consistency spread at the rate of 3.30 kgs
per sqm and jointing with white cement paste mixed with pigment of
matching shade to full depth, including cost of all materials like tiles,
cement, sand and water etc., and overheads & contractors profit complete
for finished
Toilet item of work.
alround 2 1 17.40 - 2.40 83.52
2 6 5.40 2.40 155.52
2 1 9.30 2.40 44.64
2 1 10.00 2.40 48.00
2 1 6.00 2.40 28.80
Deduct Doors 2 2 0.75 - 2.15 -6.45
deduct for Main door 2 2 1.20 - 2.15 -10.32
5.41
349.12 463.20 1 sqm 161712
 Flooring with Chequered Cement Concrete heavy duty tiles c of size 300
x 300 mm and thickness 25 mm of any shades. set over a base coat of CM
(1:8), 12mm thick (joints of stone must be flushed) over C.C. bed already
laid or R.C.C. roof slab only after it is properly cured, cleaned,
13 moistered and where necessary treated with neat grey cement slurry of
honey like consistency spred at3.3 kgs of cement for 1 sqm. and jointed
with neat cement paste to full depth, including cost and conveyance of all
materials like cement, sand, water, flooring stones etc. to site, seigniorage
charges, sales and other taxes on all materials, all operational, incidental
and labour charges such as dressing of flooring stones to the required
For pathway
sizes, mixing of cement mortar,1 laying,
1 jointing,
50.00 curing,
1.50 lift - charges
75.00
etc.,
1
complete for finished item of work 1 5.00 1.50 - 7.50
Passage 1 1 5.00 0.45 - 2.25
11.25
96.00 729.45 1 sqm 70027
In - situ - Granolithic Concrete Flooring 20mm thick with CC(1:1:2) Prop:
using 6mm to 12mm size HBG machine crushed metal laid monolithically
over 100mm thick CC flooring bed (1:5:10) with 40mm HBG metal in
alternate panels of size not exceeding 1.50m x 1.50m and finishing the top
14 surface to required smoothness and slopes, thread lining as directed by the
Engineer - in - charge including cost and conveyance of all materials like
cement, sand, water, etc. to site, seigniorage charges, sales and other taxes
on all materials, all operational, incidental and labour charges such as
mixing of cement concrete, laying, curing, lift charges etc., complete for
For pathway
finished 1
item of work (APSS No.701 1 & 710)
6.00 4.50 - 27.00
Passage 1 1 6.20 2.60 - 16.12

43.12 277.95 1 sqm 11985

Supplying, fitting and placing MS grilled door, windows, gate including
fabrication charges and all incidental charges etc, cost and conveyance of
15 all materials and all labour charges etc., complete. (make of materials -
TATA, Jindal, Sail, Visakha)

10 1 30.00 300.00
300 70.58 1Kg 21174

Providing and fixing factory made solid Wood Polymer Composite (WPC)
single extruded Door Frame section of size 45x75 MM . The two Vertical
members are to be joined together with the horizontal member using 8x50
MM long MS Star full thread screws to be used with reverse forward
16 speed control hand drilling machine. The ready/assembled door frame is
fixed to the wall using hold fast or bolt fasteners. A minimum of 4 No.s of
screws to be provided for each vertical member & minimum 2no.s for
horizontal member with encapsulation of 8MM rigid layer on all the six
surfaces. The door frame will have a rebat of 32MM

For toilet block

2 2 6.00 24.00
1.00
25.00 506.00 1Rmt 12650
Providing and fixing 28 -30 MM thick solid Wood Polymer
Composite(WPC) single extruded door shutter with 3MM top and bottom
rigid layer with an overall density of 750kg/Cum. It will be fixed to the
17
frame using 3 inch /4 inch hinges. A minimum of 4 hinges will be required
for fixing the door with the frame

For toilet block

2 2 0.75 2.15 6.45
6.45 3030.00 1 SQM 19544
 Supplying and fixing of stainless steel (grade 304) hand railing as per
approved drawing with top rail of 50mm dia pipe and 2mm thick medium
class and vertical posts of 50mm dia and 2mm thick medium class 1 No
for each 2 steps fixed with base plate of 75mm dia using bonding agent
18 and anchor fastner and welding, drilling of 25mm dia holes with
pneumatic compressor for fixing railing, buffing, polishing all members of
the railing thouroughly, lacquer finishing to present seamless finish
including cost and conveyance of all materials, electrodes, welding
charges, cost of all consumables, labour charges , overheads & contractors
profit etc., complete for finished item of work for Ground Floor
For toilet block 1 1 6.00 6.00
1 1 3.00 3.00
9.00 6612.33 1 SQM 59511

Providing Antitermite treatment as per IS 6315 (Part - 2) 2001 (Pre-

constructional chemical treatment measures) along the internal & external
vertical faces of the columns, plinth beams, basement and top surface of
the basement filling below flooring bed as per the specified procedure
21 conforming to IS 6315 (Part-2) 2001 and other relevant approved
specification duly using Chlorpyriphos/ Lindane emulsifiable concentrate
20% with 1% concentration @ 7.5 Liters/ sqm of the vertical surface & @
5.0 Liters/ sqm of the horizontal surface of the substructure to a depth of
500 mm around columns & 300 mm deep around plinth beams, basements
&
Forfloor filling7 area including excavation channel along the wall & rodding
building
etc & cost & conveyance of 1all materials
1 15.00
to the 9.15 137.25for
site, cost of labour
spraying, rodding etc complete for finished item of work as per the
approval of the Engineer-in-Charge 25.76
163.01 268.00 1 SQM 43687
Providing 16 to 18mm thick high polished granite stone slabs other than
black and regular colours (i.e. of shades like paradiso / bala flower /
copper silk / laka red / lavender blue) with borders and design as per the
pattern approved by the Engineer-in-Charge of length not less than 2.43
mts set over base coat of cement mortar (1:5) , 12mm thick using screened
sand over CC bed already laid or RCC roof slab including neat grey
22 cement slurry of honey like consistency spread @ 3.3 Kg per sqm and
jointed neatly with white cement paste mixed with pigment of matching
shade to full depth including cost and conveyance of all materials like
cement , sand , water , granite slabs etc., to work site and all operational,
incidental labour & lift charges, half rounding the edges of treads ,
polishing charges, cost of base coat and overheads & contractors profit
complete for finished item of work for treads and risers (S.S.701 &
special)
For toilet block 2 2 3.50 0.45 6.30
6.30 4297.30 1 SQM 27073
Half Rounding the edges of granite slab including polishing all labour
charges, hire charegs of tools and plants All incidental charges etc.,
23 complete for finished item of work as directed by the engineer incharge

For toilet block 2 2 3.50 14.00

14.00 318.00 1 SQM 4452
Providing High Yield Strength Deformed (HYSD) steel bars (Fe 415 grade
as per IS 1786-1985) of 8mm to 40mm diameters, cutting, bending, to
required sizes and shapes placing in position with cover blocks of
approved size and binding wire of 20SWG, forming grills for
24 reinforcement work as per approved Designs and drawings including cost
and conveyance of bars from approved sources to site of work, including
cost and conveyance of binding wire, cover blocks, chairs, overlaps,
spacers, dowels, wastage etc., and all operational, incidental, and labour
charges such as cutting, bending, placing in position, tying etc., and sales
0.50
& other taxes,on cost of all materials complete for finished item of work
(APSS No.126) in all floors. 0.50 48278 1MT 24139
 UPVC reinforced profiles(Composition of profile shall consists a
minimum of 5.5PHR of TiO2 and not more than 12 PHR of CaCo3
forevery 100 parts of PVC resin) of (108 mm x 45mm)/(95.50 mm x 60
mm) x 2.20 mm for outer frames, (75mm x 39 mm)/(66 mm x 42 mm) x
25 2.20 mm for slidingdoor shutter frames capable of mounting single
glazingsystem, structurally reinforced with hot dip galvanized upto 50
microns of minimum thickness of 1.2 mmprefabricated & welded through
fusion welding the doorsash shall be fitted with 6 mm thick clear float
glass ofreputed
For class rooms make duly fixed 18 with1 Grey colour TPV Gasket for18.00 sash &
Glazing bead shall be co-extruded with Greycolour soft PVC. Mesh
shutter shall be made of (48 mm x30 mm))/(50 mm x 26.5 mm) x 18.00 2.0 mm 1100 1SQm 19800
Supply and Fixing ofand
uPVC profilesection Window
fitted with Single and Double
Vinyl Coated Fiberleaf
meshshutter, Door
androllers/
Size
pulley1.52x1.37
duly fixedmtrs
with with
TPV Medium Teak woodsealresistant
Gaskets weathering Frame of Doorsections
shallsize
be
75mm
providedx 100mm with 4 Nos
with standard double &multi
hardware shutters made
point with stylessystem
locking and railsof
75x30mm
Patio/Roto thick with 12mm
espagulate and the Bison Designer
system board
is to be and supply
installed at the and
site fixing
using
26 of fixtures such as 4 Nos. Hold fasts, easy
Aluminium
anchor fasteners, silicon rubber sealant, glazing/Tower Bolts site
deglazingat 100mm
etc.,
long 8Nos,
including cost Alluminimum
and conveyanceHandles 100mm accessories,
of all materials, long 8 Nos,labour
75mm long
charges
M.S.Powder Coated
for transportation, butt hinges
erection 16Nos, Window
at site complete Stays
for finished 8Nos,
item Sales and
of work.
Other Taxes cost and convenyance of all materials to site all Labour
charges
For classsuch
roomsas Fixing of Window 1 5Frame on shutter Fixing in position5.00 ,
with Hardware fixtures etc., complete for finsihed item of work. . .
5.00 10475 No 52373
Supply and Fixing of Door with Double leaf shutter, Door Size 1.22x2.13
mtrs with Medium teak wood Frame of sections size 75mm x 100mm with
Shutter with MDF board both side laminated of 35mm thick including cost
of fixtures such as Aluminium Tower Bolts 250mm long 3 Nos,
27 Aluminium Handles 150mm long 2 Nos, 300mm long Aluminium Aldrops
1No, 125 mm long M.S.Powder Coated butt hinges 6Nos, 300 mm long
Aluminium Flat latch 1No, Door stoppers 2 Nos, MS Hold fasts 6Nos
300mm long including cost and convenyance of all materials to site all
Labour
For classcharges
rooms such as Fixing 1 of3 Door Frame and shutter Fixing 3.00 in
position , with Hardware fixtures etc., complete for finsihed item of work.
[Make Jyothi / Classic / Oxford] 3.00 9398 1No 28194
Supplying and laying, filling, jointing and testing SWG SP-1 pipes of ISI
make confirming to IS 1651 & 4127 1st quality with air tight Cement
joints in CM (1.5:1)prop. including excavation of trenches and socket pits
28 in any soil (except rock requiring blasting) and refilling with watering
and tamping including cost and conveyance of all materials to site and all
labour charges for finished item of work (APSS NO 1301 & 1318)

101.60 mm dia SWG pipe

upto 3' depth 1 2 10.00 - 20.00-
20.00 136.70 1 EACH 2734
For 90mm dia pipe 1 1 10.00 - - 10.00
10.00 114.35 1 EACH 1144
For 160mm dia pipe 1 1 15.00 - - 15.00
15.00 325.35 1 EACH 4880
Constructing 457.2mm x 457.2mm ( 1'-6" x 1'-6") brick in CM (1:6) prop.
Masonry inspection chamber upto 914.4mm (3'-0") and fitted with light
weight 457.2mm x 457.2mm ( 1'-6" x 1'-6") C.I. frame and cover of
29 20Kg. including cost and conveyance of all materials to site, all labour
charges, sales and other taxes on all materials etc., complete for finished
item of work.
1 16 - - - 16.00
16.00 3238.00 1 EACH 51808
Supplying & fixing Ashirvad/Astral flow guard for equivalent CPVC
Pipes with fittings in ground or on wall including cost of tees, elbows,
bends, reducers, couplings, running joints, union flanges, unions etc. with
30 necessary excavation in all types of soils except rock requiring blasting,
refilling, chiselling masonry walls and making good the walls & floors to
the original surface and fixing MS clamps on TW blocks on walls
including cost and conveyance of all materials and labour charges
complete for finished item of work.
 22.20 mm dia CPVC SDR
13.50 1 1 30.00 - - 30.00
30.00 85.00 1 Rm 2550

28.60 mm dia CPVC SDR

13.50 1 1 80.00 - - 80.00
80.00 123.00 1 Rm 9840

34.9 mm dia CPVC SDR

13.50 1 1 30.00 - - 30.00
30.00 193.00 1 Rm 5790
Supplying and fixing 580mm x 440mm long Orissa pan white glazed
Water Closet (C0116 thrift pan parryware) 1st quality ISI marked
confirming to IS:2556-Part-3-1981 with "P" or "S" trap, ISI marked and
providing masonry seat, CC squatting plate and 10 litres capacity single
31 flush PVC low level cistern with internal components fixed on 2 Nos. of
teak wood blocks of size 76.20mm x 101.60mm using required size of
nails, screws as approved by Engineer-in-charge, angle stop cock
12.70mm dia. first quality Indian make heavy duty, 12.70mm PVC
connection with brass union nuts CP coated , 31.75mm brass plumber
union, P trap or S trap of Indian W.C. shall be encased on CC (1:2:4)
For toilets 2 2 - - - 4.00
150mm alround well above the joint to stop leakage at the joint etc.,
complete including cost and conveyance of all materials to site, cost4.00
of CC 2931.00 1 each 11724
bed, labour charges, overheads & contractors profit etc., complete for
finished item of work.
 Supplying and fixing European Water Closet CASCADE SUIT 1st quality
conforming to IS:2556-Part-2-1973 of white glazed with 'S' trap,supplying
and fixing best Indian make plastic seat and lid for European water closets
with rubber or plastic Buffers as per IS 2548-1996 and 10 litres capacity
32 single flush PVC low level cistern with internal components and fixed
using required size of nails and screws, angle stop cock 12.70mm dia. first
quality Indian make heavy duty, 12mm PVC connections with brass union
nuts CP coated including cost and conveyance of all materials to site,
overheads & contractors profit etc., complete for finished item of work
for all floors.
For toilets 2 1 - - - 2.00
2.00 15500.0 1 each 31000
Supplying and fixing URS -13255 Jaquar Bowl urinals of size 440 mm x
265 mm x 315 mm with integral flushing rim fixed with screws complete
Indian make (HSW/Parry/Neycer) conforming to IS:2556-1995 as
approved by Engineer-in-charge, including supply and fixing 12.7mm
33 PVC connection with brass plumber union nuts CP coated, 12.70mm push
cock 1st quality of approved make , 31.75 mm dia PVC flexible waste
pipe of 914.4 mm length of Ist quality including cost and conveyance of
all materials to site, labour charges , overheads & contractors profit
complete for finished item of work for all floors..
For toilets 1 4 - - - 4.00
4.00 3320.00 1 each 13280
Supplying and fixing NP bib taps (CQT 23047)of size 12.70mm dia of
Indian make heavy duty (short body) as approved by the Engineer-In-
34 Charge including cost and conveyance of all materials, labour charges ,
overheads & contractors profit complete for finished item of work in all
floors.
For toilets 2 8 - - - 16.00
16.00 1450.00 1 each 23200
Supplying and fixing of SWG Gully traps 150mm x 100mm of ISI make
confirming to IS 651 & 4127 with C.I grating & constructing cement brick
35 masonry in CM (1:6) prop., intermediate chamber and fitted with 304.8
mm X 288.6 mm (12"x9") C.I Frame with hinged cover of standard make
as approved including cost and conveyance of all materials to site, labour
charges, overheads & contractors
For toilets 1 profit
6 etc.,- complete- for finished
- item of
6.00
work. 6.00 485.00 1 each 2910
Supplying and fixing of 4" (101.6mm) multi floor trap with jali -
UPVC/SWR pipe fittings as per site requirements with standard practice
36 for all floors including cost and conveyance of all materials to site, labour
charges , overheads & contractors profit etc., complete for finished item of
work.
For toilets 2 4 - - - 8.00
8.00 122.00 1 each 976
Supplying and fixing Indian make over Counter Wash Hand Basin
(JAQUAR COMPANY (FLS - WHT-2105))1st quality conforming to
IS:2556-Part-4:1972 of size 550mm x 400mm with 32 mm nominal size
C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 and
37 fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality
Indian make heavy duty complete with standard CI brackets including
wooden blocks ,1 No.12.70mm PVC connection with brass union nuts CP
coated , angle stop cock 12.70mm dia. first quality Indian make heavy
duty, 31.75mm dia. PVC flexible waste pipe 914.4mm length of 1st
quality including cost and conveyance of all materials to site, labour
charges , overheads & contractors profit for finished item of work
 For toilets 2 3 - - - 6.00
6.00 5500.00 1 each 33000
38 Supply and fixing of Wash basin taps CQT-23021 (Rate as per
Market)/(Jaquar)
2 3 - - - 6.00
6.00 1450.00 1 each 8700
Supplying and fixing Gunmetal Gate ( GM peet ) valve as per IS-778
39 Class - I , Indian make heavy type including cost and conveyance of all
materials , labour charges etc. complete for finished item of work

40mm 1 4 - - - 4.00
4.00 2155.00 1 each 8620
Supply & fixing pre-painted galvalium trepizoidal profile roofing sheets
with 0.47mm thickness,coating Alu-zinc coating AZ 150 GSM. Tensile
strength : 550 MPA,paint coating : Regular modified polyster painting.
Thickness (top) 18-20 microns,(bottom) 5-7microns including C/C of all
35 materials like sheets, J bolts, bitumen washers etc. with or wothout ridge
with sales & all other taxes & all labour charges etc. complete for fixing
sheets in position.

for cycle shed 1 1 30.00 14.00 - 420.00

420.00 477.55 1Sqm 200571
Supplying and fixing of Zinc Trusses with different Dia including C/C of
all materials like sheets, J bolts, bitumen washers etc. with or wothout
36 ridge with sales & all other taxes & all labour charges etc. complete for
fixing sheets in position.

for cycle shed 1 2500 - - - 2500.00

2,500.00 150.00 1kg 375000
Providing and fixing factory made solid Wood Polymer
Composite (WPC) single extruded Door Frame section of size
40 45x75 MM . The two Vertical members are to be joined together
with the horizontal member using 8x50 MM long MS Star full
thread screws to be used with reverse forward speed control
for
handWPC Frame
drilling 30 1
machine. The ready/assembled 5.70 - is fixed
door frame - 171.00
to the wall using hold fast or bolt fasteners. A minimum of 4 171.00 506.00 1 each 86526
No.s of screws to be provided for each vertical member
Providing and fixing 28 -30 MM thick solid Wood Polymer &
minimum 2no.s forsingle
41 Composite(WPC) horizontal member
extruded door with encapsulation
shutter with 3MM top
and bottom rigid layer with an overall density of 750kg/Cum. It
will be fixed to the frame using 3 inch /4 inch hinges. A minimum
for
of 4WPC
hingesShutters
will be required for30fixing1 the door
0.70with the
- frame
2.00 42.00
42.00 3030.00 1 each 127260

TOTAL: >>>> 2126169

Asst.Engineer Dy.Executive Engineer Executive Engineer

APEWIDC, Srikakulam APEWIDC, Srikakulam APEWIDC, Srikakulam
 DETAILED CUM ABSTRACT ESTIMATE
Name of the work : Improving Infrastructure Facilities to Govt.Polytechnic at Srikakulam (V&M) in
Srikakulam District
Under Nadu - Nedu
Compound wall
SNo Description of work No L B D Qty Rate Per Amount
Earth work excavation and depositing on bank with initial lead of 10m
and initial lift of 2m in Loamy and Clayey Soils like B.C. Soils, red earth &
Ordinary Gravel (SS 20-B) including shoring, strutting, sheeting, planking
1
and dewatering including cost of hire charges of T & P, labour charges
etc., complete for finished item of work for Foundation of Building.(APSS
No. 308)

For columns 1 50 1.00 1.00 1.50 75.00

1 1 100 0.45 0.3
13.50
2.56
Say 91.06 191.10 1 Cum 17401.566
Plain Cement Concrete corresponding to M7.5 grade as per CumIS 456
equivalent to (1:4:8) proportion nominal mix (cement: fine aggregate:
Coarse aggregate) using 40mm size Hard Blasted Granite (IS383, 1970)
metal from approved quarry including cost and conveyance of all
materials like cement, sand, coarse aggregate, water etc. to site,
2
including seigniorage charges, sales & other taxes on all materials, all
operational, incidental, and labour charges such as mixing, laying and
ramming concrete in layers in position not exceeding 15cm, finishing top
surface, curing concrete, etc., complete for finished item of work for
Foundations
For columns (APSS No. 402) 1 50 1.00 1.00 0.10 5.00
0.5
Say 5.50 3179.70 1 Cum 17488.35
Cum
Vibrated Reinforced Cement Concrete M 20 Design Mix ( by Batching
Plant ) using 20mm size (SS5) hard granite machine crushed graded
metal (Coarse aggregate) from approved quarry, using a minimum
quantity of 350 kgs. of cement per 1 cum of concreteincluding cost and
conveyance of all materials like cement, fine aggregate (Sand), coarse
aggregate, water etc., to site and cost of seigniorage charges on all
3
materials including centering using Cashewrina Ballies and Wooden
runners & staging including all bracings, cross members etc., shuttering ,
machine mixing, laying concrete, vibrating,lift charges, curing etc.,
complete but excluding cost of steel and it’s fabrication charges for
finished item of work (APSS No. 402 & 403) For coloumns , Lintels, Water
tanks, Rcc walls in building
a For Footings
1 50 0.9 0.9 0.25 10.13
0.65
Say 10.78 7899.45 1 85156
b For Pedestals
1 50 0.38 0.38 0.60 4.33
0.23
Say 4.56 8405.70 1 38330
c For Columns
1 50 0.23 0.23 2.7 7.14
 0.89
Say 8.03 9745.70 1 78273
d For Plinth beam
1 1 150 0.23 0.3 10.35
2.3
Say 12.65 10113.95 1 127941
Brick Masonry in Basement with CM (1:6) prop: using Fly ASH Bricks of
size 290x225x140mm with compressive of 50 Kgs / Sqcm from approved
source including cost and conveyance of all materials like cement, sand,
fly ash bricks, water etc., to site, including seigniorage charges, sales &
4
other taxes on all materials, all operational, incidental and labour
charges such as mixing cement mortar, constructing masonry, scaffolding
charges, lift charges, curing, etc., complete for finished item of work. for
basement (APSS No. 501 & 504).
For Long 1 1 150 0.23 1.800 62.1
Raising 1 1 90 0.23 1.000 20.7
10.23
Say 93.03 5098.05 1Sqm 474271.59
Sqm
Plain Cement Concrete corresponding to M10 grade as per IS 456
equivalent to (1:3:6) proportion nominal mix (cement: fine aggregate:
Coarse aggregate) using 20mm size Hard Blasted Granite (IS383, 1970)
Machine Crushed graded metal from from approved quarry including
5 cost and conveyance of all materials like cement, sand, coarse aggregate,
water etc. to site, including seigniorage charges, sales & other taxes on
all materials, all operational, incidental and labour charges such as
mixing, laying, curing concrete, etc., complete for finished item of work
for Bed Blocks and Hold Fasts (APSS No. 402)
For wall 1 1 150 0.23 0.10 3.45
1 1 90 0.23 0.10 2.07
0.6
Say 5.52 3902.15 1 21540

Plastering 12mm thick in two coats with base coat of 8mm thick in CM
(1:6) and top coat of 4mm thick in CM (1:4) dubara sponge finish
including cost and conveyance of all materials like cement, sand, water
etc., to site, seigniorage charges, sales & other taxes on all materials,all
5
operational, incidental and labour charges such as mixing mortar,
scaffolding charges, lift charges, including cutting of Grooves wherever
necessary as directed by Engineer - in - charge, finishing, curing, etc.,
complete for Even Surfaces of Wall for finished item of work. (APSS
901,903 & 904)
a For Compoundwall
long 1 2 150.00 2.00 600.00
1 2 90.00 1.80 324.00
52.30
Say 976.30 367.60 1 358888
 Providing High Yield Strength Deformed (HYSD) steel bars (Fe 415 grade
as per IS 1786-1985) of 8mm to 40mm diameters, cutting, bending, to
required sizes and shapes placing in position with cover blocks of
approved size and binding wire of 20SWG, forming grills for
reinforcement work as per approved designs and drawings including cost
8 and conveyance of bars from approved sources to site of work, including
cost and conveyance of binding wire, cover blocks, chairs, overlaps,
spacers, dowels, wastage etc., and all operational, incidental, and labour
charges such as cutting, bending, placing in position, tying etc., and sales
& other taxes,on cost of all materials complete for finished item of work
(APSS No.126) in all floors. 4.000
4.000 49348.45 1 197394
Painting to New walls with two coats of acrylic emulsion paint MTweather
proof waterbased, modified acrylic with silicon additives exterior grade
having VOC (Volatile Organic Compound ) content less than 50 grams/
liter of superior quality of approved brand and shade over base coat of
cement primer grade -I making three coats in all to give an even shade
5 after thoroughly brushing the surface to remove all loose powdered
materials, including cost and conveyance of all materials, including cost
and conveyance of all materials, cost of brushes, water to site, etc., sales
& other taxes, all operational, incidental and labour charges such as
scaffolding charges, lift charges, curing etc., complete for finished item of
a work in all floors for Walls.(APSS No. 911) in All Floors EXTERNAL
For Compoundwall
long 1 2 150.00 2.00 600.00
1 2 90.00 1.80 324.00
52.30
Say 976.30 200.70 1 195943

GROUND FLOOR TOTAL: 1381794

Assistant Engineer, Dy.Executive Engineer, Executive Engineer,

APEWIDC, Palasa APEWIDC, Tekkali APEWIDC, Srikakulam
 DETAILED ESTIMATE
Name of the work : Improving Infrastructure Facilities to Govt.Polytechnic at Srikakulam (V&M) in
Srikakulam District
Under Nadu - Nedu
Numb Total
Sl No Description of Item L B D Units Rate in Rs. Amount in Rs.
er Quantity
Duel Desks for students particle board (Wood Product) of
1 grade II type II of IS 12823 of Teak wood.
120 120
Total 120 Nos 6930 831,600
Head Master Table for Upper Primary/ High Schools (With
computer provision) Three layer prelaminated particle
1 board (Wood Product) of grade II type II of IS 12823 of
Teak wood.
Head Master table 1 1
Total 1 Nos 8800 8,800
Head Master Chair for Upper Primary/ High Schools
Pedestal Base is with Chrome fnish with 5 wheels and arm
2 material withProypylene and seat material is PU Foam
covered with Fabric Material.

Head Master Chair 1 1

Total 1 Nos 13701 13,701
MS Racks for HM Room, Staff room, Library room,
Laboratory room Material is with 0.8 mm Thick MS Sheet
3
Conforming to Commercial Quality CR-1, Grade 340 of IS
513. size Rolled steel angle posts of 40 X 40 X 3 mm

MS Racks for HM Room 6 6

Total 6 Nos 3748 22,488
Almairahs (Steel) for HM Room, Staff room, Library
room,
3
Laboratory room, M.S sheet conforming to commercial
quality
CR- 1,Grade340 of IS 513:2008 (rea??rmed 2013)(Fifth
Revision)Amdt. no.1 Sheet thickness of door in 0.8 mm
(minimum)
MS Racks for HM Room 25 25
Total 25 Nos 7850 196,250
Stools (Stainless steel) for HM room, Staff room,
4 Laboratory room, Library room, Without cushion and
stool top is Round Material of Stainless Steel.
Stools (Stainless steel) 10 10
Total 10 Nos 854 8,540
 Teacher Table in classroom, Table Top Material is 18 mm
thick prelaminated Particle Board (Not as per IS8126)
5 Thickness (±2 mm). One side double storage is provided
and pedastals (under structure) Mild Steel Square Section
of outside side minimum 25 mm and wall thickness
Teacher
minimumTable
1.2 mm 15 15
Total 15 Nos 3304 49,560
Teacher Chair in classroom, Library room, Laboratory
6 room Seat and Backrest is Made of Polythene cane.

Teacher Chair 25 25
Total 25 Nos 1050 26,250
Reading Table in Library room Table Top Material is 20
mm thick MDF Board of grade SBG II conforming to
IS12406 laminated withminimum 0.6 mm thick on Top
side oftype S, P or F having index 3.2.3conforming to IS
7
2046 andminimum
0.5 mm thick balancing laminate on the other side and one
side single storage is provided and unde structure is with
Mild Steel Square Section of outside side minimum 25
mmand
Readingwall
Tablethickness minimum
in Library room 1.2 mm. 4 4
Total 4 Nos 2600 10,400
Computer Table of MDF board of grade SBG II of IS
12406/Latest Gable end and Modesty panel material is with
8 Flat single layer prelaminated MDF board conforming
tohaving designation PLMDF-23 of IS 14587/Latest. The
overall dimensions should be of size 1370mm X 760mm X
760mm.
Computer table 50 50
Total 50 Nos 2400 120,000
Computer Chair Pedestal Base is with Chrome fnish with 5
wheels and Arm Material covered with propylene and seat
9 material with PU Foam covered with Fabric.

Computer Chair 50 50
Total 50 Nos 4998 249,900
Plastic Dust Bin large Royal -Drum 80 ltr. ( Dust bin or
10 Garbage Binor Household Bin) (ROYAL WORLD) (From
PLASTIC DUSTBIN ROYAL)
Plastic Dust Bin large 6 6
Total 6 Nos 780 4,680
11 Plastic dust bin (NA) (waste paper basket) small
plastic dust bin small 15 15
Total 15 Nos 70 1,050
12 Podium (MDF laminated board) size
700mmx600mmx1200mm
Podium 1 1
Total 1 Nos 5400 5,400
13 Provision for Lab Equipment 16,327,748
13 Gym & Sports equipment 3,000,000

>>>> Total 20,876,367

Asst.Engineer Dy.Executive Engineer Executive Engineer

APEWIDC, Srikakulam APEWIDC, Srikakulam APEWIDC, Srikakulam
 DETAILED CUM ABSTRACT ESTIMATE
Name of the work : Improving Infrastructure Facilities to Govt.Polytechnic at Srikakulam (V&M) in
Srikakulam District
Under Nadu - Nedu
Paintings
SNo Description of work No L B D Qty Rate Per Amount

Painting to New walls with two coats of acrylic interior emulsion paint having
VOC (Volatile Organic Compound) content less than 50 grams/ liter.of superior
quality of approved brand and shade over base coat of cement primer grade -I
making three coats in all to give an even shade after thoroughly brushing the
surface to remove all loose powdered materials, including cost and conveyance
1
of all materials, including cost and conveyance of all materials, cost of brushes,
water to site, etc., sales & other taxes, all operational, incidental and labour
charges such as scaffolding charges, lift charges, curing etc., complete for
finished item of work in all floors for Walls.(APSS No. 911) in All Floors
INTERNAL

Right wing - Lab -3.. 1 1 14.37 9.02 129.62

Ceilings
3 2 9.02 0.60 32.47
Beam sides
Lab -4.. 1 1 14.37 9.02 129.62
Ceilings
Beam 3 2 9.02 0.60 32.47
sides
1 1 9.02 3.42 30.85
Toilet block
Lab -6.. 1 1 14.37 9.02 129.62
Ceilings
Beam 3 2 9.02 0.60 32.47
sides
Lab -7.. Ceilings 1 1 11.44 9.02 103.19

Beam 2 2 9.02 0.60 21.65

sides
Verandah 1 1 33.08 2.4 79.39
ceiling
Beam 9 2 2.4 0.30 12.96
sides
Lab-3&4..Cross 1 2 14.37 0.30 8.62
beams
1 2 14.37 0.30 8.62
Lab -6 "
1 2 11.44 0.30 6.86
Lab -7 "
Ded beam -1 11 0.30 0.30 -0.99
junctions
Left block -Lab-1 1 1 14.38 9.02 129.71
Lab-2 1 1 11.04 9.02 99.58
Lab-5 1 1 14.37 9.02 129.62
Lab-6 1 1 15.06 9.02 135.84
Corridor 1 1 35.80 2.40 85.92
Toilet 1 1 3.48 9.02 31.39
Staircase area 1 1 5.68 4.53 25.73
1 1 4.70 2.40 11.28
Flights 1 2 3.60 1.50 10.80
Landing 1 1 3.02 1.50 4.53
Beam sides 2 11 9.02 0.60 119.06
1 2 5.65 0.30 3.39
1 2 3.02 0.30 1.81
1 2 4.30 0.30 2.58
Corridor beams 9 2 2.40 0.30 12.96
0.00
Portico ceiling 1 1 6.30 4.50 28.35
Sides of beams 1 2 5.84 0.45 5.26
" 2 2 4.27 0.3 5.12
Left wing -Lab -1 alround 1 1 46.40 3.40 157.76

-Lab -2 " 1 1 40.12 3.40 136.41

-Lab -5 " 1 1 46.78 3.40 159.05
-Lab -6 " 1 1 48.08 3.40 163.47
-Toilets " 1 1 24.88 2.00 49.76
Ded doors -1 8 1.22 2.13 -20.79
Ded openings -1 1 0.90 2.13 -1.92
Ded Windows -1 17 1.50 1.35 -34.43

Ded -1 5 0.60 0.45 -1.35

Ventilators
Right wing - Lab 3 alround 1 1 46.78 3.40 159.05

Lab 4 " 1 1 46.78 3.4 159.05

-Lab -7 " 1 1 40.98 3.37 138.10
-Lab -8 " 1 1 46.78 3.37 157.65
Column sides 2 11 0.37 3.40 27.68
Ded doors -1 8 1.22 2.13 -20.79
Ded windows -1 15 1.50 1.35 -30.38
Toilet alround 1 1 24.88 2.00 49.76
Ded ventilators -1 6 0.60 0.45 -1.62
Ded doors -1 1 0.90 2.13 -1.92
plinth protection 1 1 95.00 0.90 85.50
S/C parapet 2 2 3.65 0.75 10.95
Lab-5 &6 Shelf walls 2 4 0.45 1.6 5.76
Lab-1 3 4 0.45 1.6 8.64
Lab-2 4 4 0.45 1.6 11.52
Lab-4 -shelves 2 4 0.45 1.6 5.76
-counter pins 2 4 0.5 0.75 3.00
-table pins 3 6 0..50 0.75 13.5
Lab-3 -shelves 2 4 0.45 1.6 5.76
-counter pins 2 4 0.5 1.05 4.2
2 4 0.5 0.75 3.00
Lab 7& - shelves 2 4 0..50 1.6 12.8
-counters 4 4 0.5 1.05 8.40
Left-staircase wall 1 2 5.05 3.4 34.34
Work Shops walls 1 2 44.00 3.65 321.20
deduct doors -1 2 1.20 2.10 -5.04
deduct window -2 3 1.50 1.35 -12.15
door jombs 1 2 5.40 0.25 2.70
window jombs 2 3 5.70 0.25 8.55
ceiling 1 2 7.30 6.60 96.36
beam 2 2 6.60 0.45 11.88
ver ceiling 1 1 14.83 1.80 26.69
Block 3,5, walls 2 1 44.20 3.65 322.66
deduct doors -2 1 1.20 2.10 -5.04
deduct window -2 3 1.50 1.35 -12.15
door jombs 2 1 5.40 0.25 2.70
window jombs 2 3 5.70 0.25 8.55
ceiling 2 1 7.30 6.60 96.36
beam 2 2 6.60 0.45 11.88
ver ceiling 2 1 7.30 1.80 26.28
Block 2 GF walls 3 1 38.00 3.30 376.20
deduct doors -3 1 1.20 2.10 -7.56
deduct window -3 3 1.50 1.35 -18.23
door jombs 3 1 5.40 0.25 4.05
window jombs 3 3 5.70 0.25 12.83
ceiling 3 1 7.30 6.60 144.54
beam 3 2 6.60 0.45 17.82
ver ceiling 1 1 32.00 1.80 57.60
stair case side walls 1 2 6.90 3.35 46.23
hand rail 2 1 3.40 1.80 12.24
flight ceiling 2 1 3.40 1.20 8.16
FF walls 3 1 29.20 3.30 289.08
deduct doors -3 1 1.20 2.10 -7.56
deduct window -3 3 1.50 1.35 -18.23
door jombs 3 1 5.40 0.25 4.05
window jombs 3 3 5.70 0.25 12.83
ceiling 3 1 7.30 6.60 144.54
beam 3 2 6.60 0.45 17.82
ver ceiling 1 1 31.50 1.80 56.70
stair case side walls 1 2 6.90 3.35 46.23
c. walls 1 1 3.00 3.35 10.05
hand rail 2 1 3.40 1.80 12.24
flight ceiling 2 1 3.40 1.20 8.16
Block 8 GF class room walls 3 1 32.00 3.30 316.80
deduct doors -3 1 1.20 2.10 -7.56
deduct window -3 3 1.50 1.35 -18.23
door jombs 3 1 5.40 0.25 4.05
window jombs 3 3 5.70 0.25 12.83
ceiling 3 1 7.30 6.60 144.54
beam 3 2 6.60 0.45 17.82
end rooms ceiling 2 1 8.63 6.60 113.92
wlls 2 1 33.45 3.35 224.12
deduct doors -2 1 1.20 2.10 -5.04
windows -2 4 1.50 1.35 -16.20
jombs 2 1 5.40 0.25 2.70
8 1 5.70 0.25 11.40
Library ceiling 1 1 10.95 6.60 72.27
walls 1 1 38.52 3.30 127.12
deduct doors -1 2 1.20 2.10 -5.04
-1 4 1.50 1.35 -8.10
jombs 2 1 5.40 0.25 2.70
4 1 5.70 0.25 5.70
toilets 2 1 4.20 1.80 15.12
walls 2 1 12.00 0.90 21.60
FIRST FLOOR
Ceilings 1 1 28.00 9.02 252.56
Drawing hall 2 7 9.02 0.60 75.77
Beam sides 1 1 9.02 3.42 30.85
Toilet block 1 1 14.77 9.02 133.23
Labs ceilings 3 2 9.02 0.60 32.47
Beam sides 1 1 11.44 9.020 103.19
2 2 9.02 0.60 21.65
Verandah 1 1 30.00 2.400 72.00
Beam sides 9 2 2.40 0.30 12.96
B-13 sides 2 1 33.11 0.30 19.87
B-16 sides 1 2 30.18 0.30 18.11
Ded.beam junction -10 2 0.30 0.30 -1.80
-2 9 0.30 0.30 -1.62
Hall 1 1 12.15 6.250 75.94
Sides of beams 2 2 11.65 0.60 27.96
" 2 2 2.95 0.30 3.54
" 2 2 2.40 0.30 2.88
Drawing hall alround 1 1 75.84 3.40 257.86
1 2 30.14 3.65 220.02
Lab-7 1 2 40.98 3.40 278.66
Lab8 1 1 46.78 3.40 159.05
Toilet alround 1 1 25 2.00 50.00
Ded doors -1 8 1.22 2.13 -20.79
Ded windows -1 15 1.5 1.35 -30.38
Ded ventilators -1 5 0.60 0.45 -1.35
Connecting Corridor- 1 2 11.65 3.52 82.02
Internal
1 1 5.955 3.52 20.96
Staircase wall 1 2 4.95 3.52 34.85
1 2 2.955 3.52 20.80
at portico side 1 1 2.47 3.52 8.69
partition wall 1 2 2.4 3.52 16.90
Ded door -0.5 1 1.22 2.13 -1.30
Ded windows -0.5 3 1.5 1.35 -3.04
Ded openings -1 2 0.75 2.13 -3.20
S/C parapet 2 2 3.65 0.75 10.95
Room-1 shelf 2 2 0.45 1.6 2.88
-platform pins 2 15 0.5 0.75 11.25
 Room-2 Shelf 2 4 0.5 1.5 6.00
Room -4 shelf 3 4 0.5 1.5 9.00
Work Shops 1 2 44.00 3.65 321.20
2 1 33.45 3.35 224.12
-2 1 1.20 2.10 -5.04
-2 4 1.50 1.35 -16.20
2 1 5.40 0.25 2.70
8 1 5.70 0.25 11.40
1 1 10.95 6.60 72.27
1 1 38.52 3.30 127.12
-1 2 1.20 2.10 -5.04
-1 4 1.50 1.35 -8.10
2 1 5.40 0.25 2.70
-1 2 1.20 2.10 -5.04
-2 3 1.50 1.35 -12.15
1 2 5.40 0.25 2.70
2 3 5.70 0.25 8.55
1 2 7.30 6.60 96.36
2 2 6.60 0.45 11.88
1 1 14.83 1.80 26.69
2 1 44.20 3.65 322.66
-2 1 1.20 2.10 -5.04
-2 3 1.50 1.35 -12.15
2 1 5.40 0.25 2.70
2 3 5.70 0.25 8.55
2 1 7.30 6.60 96.36
2 2 6.60 0.45 11.88
2 1 7.30 1.80 26.28
3 1 38.00 3.30 376.20
-3 1 1.20 2.10 -7.56
-3 3 1.50 1.35 -18.23
3 1 5.40 0.25 4.05
3 3 5.70 0.25 12.83
3 1 7.30 6.60 144.54
3 2 6.60 0.45 17.82
1 1 32.00 1.80 57.60
1 2 6.90 3.35 46.23
2 1 3.40 1.80 12.24
2 1 3.40 1.20 8.16
3 1 29.20 3.30 289.08
-3 1 1.20 2.10 -7.56
-3 3 1.50 1.35 -18.23
3 1 5.40 0.25 4.05
3 3 5.70 0.25 12.83
3 1 7.30 6.60 144.54
3 2 6.60 0.45 17.82
1 1 31.50 1.80 56.70
 1 2 6.90 3.35 46.23
1 1 3.00 3.35 10.05
2 1 3.40 1.80 12.24
2 1 3.40 1.20 8.16
3 1 32.00 3.30 316.80
-3 1 1.20 2.10 -7.56
-3 3 1.50 1.35 -18.23
3 1 5.40 0.25 4.05
3 3 5.70 0.25 12.83
3 1 7.30 6.60 144.54
3 2 6.60 0.45 17.82
2 1 8.63 6.60 113.92
2 1 33.45 3.35 224.12
-2 1 1.20 2.10 -5.04
-2 4 1.50 1.35 -16.20
2 1 5.40 0.25 2.70
8 1 5.70 0.25 11.40
1 1 10.95 6.60 72.27
1 1 38.52 3.30 127.12
-1 2 1.20 2.10 -5.04
-1 4 1.50 1.35 -8.10
2 1 5.40 0.25 2.70
4 1 5.70 0.25 5.70
2 1 4.20 1.80 15.12
2 1 12.00 0.90 21.60
322.37
Say 12123.19 147.45 1Sqm 1787564
Sqm

Painting to New walls with two coats of acrylic emulsion paint weather proof
waterbased, modified acrylic with silicon additives exterior grade having VOC
(Volatile Organic Compound ) content less than 50 grams/ liter of superior
quality of approved brand and shade over base coat of cement primer grade -I
making three coats in all to give an even shade after thoroughly brushing the
2 surface to remove all loose powdered materials, including cost and conveyance
of all materials, including cost and conveyance of all materials, cost of brushes,
water to site, etc., sales & other taxes, all operational, incidental and labour
charges such as scaffolding charges, lift charges, curing etc., complete for
finished item of work in all floors for Walls.(APSS No. 911) in All Floors
EXTERNAL

South side -Right wing 1 1 33.01 3.65 120.49

West 1 1 21.37 3.65 78.00
East(2 wings) 1 2 9.25 3.65 67.53
Duct side faces 1 2 9.25 3.65 67.53
North faces 1 1 14.76 3.65 53.87
" 1 1 11.90 3.65 43.44
" 1 1 3.42 3.65 12.48
" 1 1 2.70 3.65 9.86
Ded windows -1 16 1.50 1.35 -32.40
2 1 40.90 3.85 314.93
Ded ventilators -1 2 1.20 0.45 -1.08
" -1 5 0.60 0.45 -1.35
Column sides 19 2 0.37 3.65 51.32
Add windows jambs 1 16 5.7 0.23 20.98
Left wing - South side 1 2 18.37 3.65 134.10
" 1 1 11.5 3.65 41.98
" 1 1 3.53 3.65 12.88
-East 1 1 21.37 3.65 78.00
-West 1 2 9.25 3.65 67.53
-North 1 2 30.14 3.65 220.02
ded openings -1 2 2.8 3.07 -17.19
Duct sides 1 2 9.25 3.65 67.53
Ded windows -1 18 1.5 1.35 -36.45
Ded ventilators -1 2 1.2 0.45 -1.08
" -1 5 0.6 0.45 -1.35
Add windows jambs 1 18 5.7 0.23 23.60
Right wing - Corridor sides 1 2 32.78 3.40 222.90
" 1 1 2.4 3.40 8.16
3 2 6.60 0.45 17.82
2 1 8.63 6.60 113.92
2 1 33.45 3.35 224.12
-2 1 1.20 2.10 -5.04
-2 4 1.50 1.35 -16.20
2 1 5.40 0.25 2.70
8 1 5.70 0.25 11.40
1 1 10.95 6.60 72.27
1 1 38.52 3.30 127.12
-1 2 1.20 2.10 -5.04
-1 4 1.50 1.35 -8.10
2 1 5.40 0.25 2.70
4 1 5.70 0.25 5.70
Ded doors -1 8 1.22 2.13 -20.79
" -1 1 0.9 2.13 -1.92
2 1 40.90 3.85 314.93
Left wing - Corridor 1 2 35.8 3.40 243.44
" 1 2 33.1 3.40 225.08
" 1 1 2.7 3.40 9.18
Staircase side walls 1 2 9.25 3.40 62.90
1 1 18.8 2.40 45.12
1 1 15.35 3.85 59.10
1 2 9.15 3.85 70.46
-1 2 1.80 2.10 -7.56
1 1 14.85 3.35 49.75
 1 1 18.45 1.20 22.14
1 1 15.35 1.20 18.42
1 5 1.00 2.10 10.50
2 1 7.80 3.85 60.06
2 2 9.15 3.85 140.91
-2 2 1.80 2.10 -15.12
2 1 7.30 3.35 48.91
2 1 10.90 1.20 26.16
2 1 7.80 1.20 18.72
2 3 1.00 2.10 12.60
2 1 40.90 3.85 314.93
1 2 9.15 3.85 70.46
1 2 7.10 3.85 54.67
1 1 33.30 3.35 111.56
1 1 33.30 1.20 39.96
FIRST FLOOR 1 1 33.01 3.65 120.49
West 2 1 21.37 3.65 156.00
East side 2 2 9.25 3.65 135.05
Duct faces 1 2 9.25 3.65 67.53
North 1 1 14.86 3.65 54.24
" 1 1 11.90 3.65 43.44
" 1 1 3.42 3.65 12.48
" 1 1 2.70 3.65 9.86
Ded windows -1 16 1.50 1.35 -32.40
Ded ventiltors -1 2 1.20 0.45 -1.08
" " -1 5 0.60 0.45 -1.35
Add window jambs 1 16 5.70 0.20 18.24
Column sides 19 2 0.37 3.65 51.32
Corridor 2 1 32.78 3.40 222.90
" 1 1 2.40 3.40 8.16
Ded doors -1 8 1.22 2.13 -20.79
Ded windows -1 1 1.50 1.35 -2.03
Partition walls 2 2 9.02 3.13 112.93
" 2 5 1.80 0.90 16.20
" 1 2 7.25 0.90 13.05
Ded doors -2 5 0.75 0.90 -6.75
Dummy column alround 1 34 1.80 1.00 61.20

" T op 1 34 0.30 0.60 6.12

Connecting Corridor- 1 2 12.855 3.65 93.84
External
1 1 6.255 3.65 22.83
S/C outer 1 1 3.555 3.65 12.98
at portico side 1 1 2.7 3.65 9.86
Ded corridor -1 1 2.4 3.65 -8.76
Ded door -0.5 1 1.22 2.13 -1.3
Ded windows -0.5 3 1.5 1.35 -3.04
Ded openings -0.5 1 1.2 1.8 -1.08
Say 5324.26 200.70 1Sqm 1068580
 Painting to New wood work with two coats of ready mixed Synthetic Enamel
paints in all shades Grade - I having VOC (Volatile Organic Compound ) content
less than 50 grams/ liter to give an even shade over base coat Primer with
3 Luppam finishing after thoroughly brushing the surface to remove all remains
including cost and conveyance of all materials to site, sales & other taxes, all
operational, incidental and labour charges etc., complete for finished item of
work.(3 coats) (APSS No. 1201 & 1212).in All Floors
For Doors 40 2.25 1.22 2.15 236.07
For Doors 10 2.25 0.9 2.15 43.54
For Doors 22 2.25 0.75 2.15 79.82
Say 359.43 146.10 1Sqm 52512.723
Sqm
GROUND FLOOR TOTAL: 2908656

Assistant Engineer, Dy.Executive Engineer, Executive Engineer,

APEWIDC, Srikakulam APEWIDC, Srikakulam APEWIDC, Srikakulam
 DETAILED CUM ABSTRACT ESTIMATE
Name of the work : Improving Infrastructure Facilities to Govt.Polytechnic at Srikakulam (V&M) in
Srikakulam District
Under Nadu - Nedu
Green Chalk Board
SNo Description of work No L B D Qty Rate Per Amount
Suppy and Fixing / Erection of e-3 ceramic magnetic Green Chalk Board
of size 8 X 4 (2.4x1.2m) with vitrious enamil coated sheet made up of 0.3
to 0.4 mm thick steel sheet having 0.095 mm thick on top and 0.03 mm
min on the back supported with 9mm thick MDF board having bulk
density of 750 kg/cum and laminated with 0.25 mm thick electro
1
galvanised steel sheet at the back. Both the top and backing sheet shall
be properly fixed with MDF board using suitable adhesive to avoid any
moisture absorption. Fixed in deluxe quality aluminium channels
conforming to ISI standards including cost, transportation and all labour
charges for fixing etc complete for finished item of work
For class rooms 1 10 10
Say 10 10200.00 1 No 102000
No
TOTAL: 102000

Assistant Engineer, Dy.Executive Engineer, Executive Engineer,

APEWIDC, Srikakulam APEWIDC, Srikakulam APEWIDC, Srikakulam
 WORKING ESTIMATE
Name of the work : Improving Infrastructure Facilities to Govt.Polytechnic at Srikakulam (V&M) in
Srikakulam District
Under Nadu - Nedu

GROUND FLOOR
SNo Description of work No L B D Qty Rate Per Amount
Earth work excavation and depositing on bank with initial lead of 10m and
initial lift of 3m in Loamy & Clayey Soils like BC Soils, Red Earth &
Ordinary Gravelly Soils ( SS 20-B) including all operational incidental
labour charges such as shoring, strutting, sheeting, planking and
1
dewatering including cost of hire charges of T & P, labour charges etc.,
complete for finished item of work including seignerage charges
excluding dewatering charges etc., complete for Foundation of Building.
(APSS No. 308)
F1 Footings 1 2 2.35 2.35 1.8 19.88
Column Footings F2 1 6 2.15 2.15 1.8 49.92
Column Footings F3 1 8 1.95 1.95 1.8 54.76
Column Footings F4 1 8 1.3 1.3 1.8 24.34
long walls 2 1 25.55 0.60 0.45 13.80
cross walls 2 1 9.15 0.60 0.45 4.94
Portico side 1 2 3.60 0.60 0.45 1.94 Laboratry 1
1 1 3.23 0.60 0.45 0.87
0.00
0.00
0.00
0.00
0.00
6.50
Say 176.95 191.10 1 33815.145

Filling with Sand Cushion under footings with initial lead in layers not
exceeding 15cm thick, consolidating each deposited layer by watering and
ramming including cost and conveyence of water to the work site and all
2
operational & incidental charges, labour charges, hire and opertaional
charges of T & P etc., complete for finished item of work. (APSS NO. 309
& 310)

F1 Footings 1 2 2.35 2.35 0.3 3.31

Column Footings F2 1 6 2.15 2.15 0.3 8.32
Column Footings F3 1 8 1.95 1.95 0.3 9.13
Column Footings F4 1 8 1.3 1.3 0.3 4.06
Plain Cement Concrete corresponding to M7.5 grade Sayas per IS24.82456 649.25 1 16114.385
equivalent to (1:4:8) proportion nominal mix (cement: fine aggregate:
Coarse aggregate) using 40mm size Hard Blasted Granite (IS383, 1970)
metal from approved quarry including cost and conveyance of all
materials like cement, sand, coarse aggregate, water etc. to site, including
3
seigniorage charges, sales & other taxes on all materials, all operational,
incidental, and labour charges such as mixing, laying and ramming
concrete in layers in position not exceeding 15cm, finishing top surface,
curing concrete, etc., complete for finished item of work for Foundations
(APSS
F1 No. 402)
Footings 1 2 2.35 2.35 0.10 1.10
Column Footings F2 1 6 2.15 2.15 0.10 2.77
 Column Footings F3 1 8 1.95 1.95 0.10 3.04
Column Footings F4 1 8 1.3 1.3 0.10 1.35
1.02
Plain Cement Concrete corresponding to M5 grade as per IS 9.28
say 456 3179.70 1 29507.616
equivalent to (1:5:10) proportion nominal mix (cement: fine aggregate:
Coarse aggregate) using 40mm size Hard Blasted Granite (IS383, 1970)
metal from approved quarry including cost and conveyance of all
materials like cement, sand, coarse aggregate, water etc. to site, including
4
seigniorage charges, sales & other taxes on all materials, all operational,
incidental, and labour charges such as mixing, laying and ramming
concrete in layers in position not exceeding 15cm, finishing top surface,
curing concrete, etc., complete for finished item of work for Foundations
and Flooring
plinth Bed (APSS No. 402)1
beam Rearside 1 25.55 0.45 0.10 1.15
Frontside 1 1 25.55 0.45 0.10 1.15
Leftside flightside 1 1 9.15 0.45 0.10 0.41
Leftside flightside 1 1 9.15 0.45 0.10 0.41
Portico side 1 2 3.60 0.60 0.10 0.43 Room Sizes
1 1 3.23 0.60 0.10 0.19 Laboratry 1
ramp 1 1 3.20 2.70 0.10 0.86
1 1 3.30 2.30 0.10 0.76
For floor bed 1 6 6.70 3.47 0.10 13.95
1 6 3.54 1.80 0.10 3.82
1 1 3.30 6.70 0.10 2.21
1 1 3.00 1.80 0.10 0.54
1 1 3.60 3.60 0.10 1.30
0.00
0.00
0.00
0.00
0.00
0.00
1.50
Say 28.68 3040.36 1 87197.3814
Vibrated Reinforced Cement Concrete M 20 Design Mix ( by Batching
Plant ) using 20mm size (SS5) hard blasted granite machine crushed
graded metal (Coarse aggregate) from approved quarry, using a minimum
quantity of 350 kgs. of cement per 1 cum of concreteincluding cost and
conveyance of all materials like cement, fine aggregate (Sand), coarse
aggregate, water etc., to site and cost of seigniorage charges on all
5
materials including centering using Cashewrina Ballies and Wooden
runners & staging including all bracings, cross members etc., shuttering ,
machine mixing, laying concrete, vibrating,lift charges, curing etc.,
complete but excluding cost of steel and it’s fabrication charges for
a) finished
COLUMN item of work for foundation, plinth , pedastals(below plinth)
FOOTINGS:
(APSS No. 402 & 403)
F1 1 2 2.2 2.2 0.4 3.87
Column Footings F2 1 6 2 2 0.35 8.4
Column Footings F3 1 8 1.8 1.8 0.3 7.78
Column Footings F4 1 8 1.15 1.15 0.2 2.12
0.83
Say 23.00 7899.45 1 181687.35
b Pedastals
1 16 0.45 0.60 0.60 2.59
 1 8 0.38 0.38 0.60 0.69
0.1
Say 3.38 8405.70 1 28411.266
c Columns
C1 C2 1 11 0.3 0.45 1.20 1.78
C3, 1 5 0.3 0.45 1.35 0.91
c4 1 1 0.23 0.23 1.45 0.08
C5 1 7 0.23 0.23 1.45 0.54
For Columns 1 16 0.3 0.45 3.35 7.24
1 8 0.23 0.23 3.35 1.42
0.53
Say 10.72 9745.70 1 104473.904
d Plinth beams
For long beams 1 2 26.08 0.3 0.3 4.69
Internal PB 1 8 7.38 0.3 0.45 7.97
1 3 1.75 0.23 0.3 0.36
1 1 3 0.23 0.3 0.21
0.77

Say 14.00 10113.95 1 141595.3

e Roof beams in GF
For long beams 1 3 26.08 0.23 0.3 5.40
Internal RB 1 8 7.38 0.3 0.45 7.97
1 5 1.8 0.23 0.23 0.48
1 1 3.30 0.23 0.30 0.23
0.92

Say 15 8155.45 1 122331.75

f Roof slab 175 mm thick
1 1 3.6 1.50 5.40
Midlanding 1 1 3.3 1.73 5.71
1 1 3.6 1.50 5.40
3.49
Say 20.00 1238.90 1 24778
f Roof slab 125 mm thick
1 1 26.08 7.16 186.73
-1 1 4.5 3 -13.5
6.77
Say 180 981.65 1 176697
f Roof slab 100 mm thick
1 1 26.08 1.80 46.94
3.06

Say 50.00 858.70 1 42935

g LINTELS: (RCC)
over openings 2 6 3.47 0.23 0.15 1.44
 0.56
Say 2.00 9326.00 1 18652

h Sun Shades of 0.6 mtrs of avearage thick of 0.0625 mtrs

For verandha 1 1 26.08 0.60 15.65
1 2 2.2 0.60 2.64
For windows 1 6 2 0.60 7.2
1 1 1.8 0.6 1.08
3.43
Say 30.00 698.55 1 20956.5

Filling with useful available excavated earth (excluding rock) in trenches,

sides of foundations and basement with initial lead in layers not exceeding
15cm thick, consolidating each deposited layer by watering and ramming
6
including cost and conveyence of water to work site and all operational,
incidental, labour charges, hire charges of T & P etc., complete for
finished item of work. (APSS NO. 309 & 310)

Say 176.95 281.00 1 49723

Filling with Gravel in trenches, sides of foundations and basement with

initial lead in layers not exceeding 15cm thick, consolidating each
deposited layer by watering and ramming including cost and conveyence
7
of water to the work site and all operational, incidental, labour charges,
seignorage charges, hire charges of T & P etc., complete for finished item
of work. (APSS NO. 309 & 310)
For basement 1 1 25.62 8.45 1.00 216.49
For Ramp 1 1 8.00 1.50 0.95 11.40
platform 1 1 3.60 1.50 0.95 5.13
16.98
Brick Masonry in Basement with CM (1:6) prop: using Fly Say ASH Bricks
250.00
of 342.05 1 85512.5
size 290x225x140mm with compressive of 50 Kgs / Sqcm from approved
source including cost and conveyance of all materials like cement, sand,
fly ash bricks, water etc., to site, including seigniorage charges, sales &
8
other taxes on all materials, all operational, incidental and labour charges
such as mixing cement mortar, constructing masonry, scaffolding charges,
lift charges, curing, etc., complete for finished item of work. for basement
(APSS No. 501 & 504).
For basement 1 6 3.47 0.45 0.75 7.03
1 6 3.54 0.45 0.75 7.17
1 2 6.48 0.45 0.75 4.37
1 2 1.80 0.45 0.75 1.22
1 6 3.47 0.30 0.45 2.81
1 6 3.54 0.30 0.45 2.87
Ramp 1 1 8.00 0.30 0.60 1.44
1 1 1.20 0.30 0.45 0.16
platform 1 2 1.20 0.30 1.20 0.86
1 1 4.07 0.30 1.20 1.47
steps 1.6
Say 31.00 5098.05 1 158039.55
 Brick Masonry in superstructure with CM (1:8) prop: using second class
bricks from approved source having minimum crushing strength of 40
Kg/Sqcm. including cost and conveyance of all materials like cement,
9 sand, bricks, water etc., to site, including sales & other taxes on all
materials, all operational, incidental and labour charges such as mixing
cement mortar, constructing masonry, scaffolding charges, lift charges,
curing, etc., complete for finished item of work. (APSS No. 501 & 504).

For building 2 6 3.47 0.23 3.00 28.73

1 1 3.00 0.23 3.35 2.31
1 5 6.48 0.23 2.90 21.61
parapet wall 1 6 3.47 0.23 0.80 3.83
1 2 1.52 0.23 0.80 0.56
For draft wall 1 6 3.47 0.23 0.95 4.55
1 1 3.00 0.23 0.95 0.66
1 2 1.60 0.23 0.80 0.59
Deduction doors -1 3 1.22 0.23 2.13 -1.79
Deduction windows -3 3 1.50 0.23 1.35 -4.19
-3
Supply and Fixing of Door with Double 3leaf 1.50
shutter,0.23 0.30
Door Size -0.93
1.22x2.13 mtrs with Medium teak wood Frame of sections size 4.07
75mm x 100mm with Shutter with MDF board both sideSay 60.00 5428.60 1 325716
laminated of 35mm thick including cost of fixtures such as
Aluminium Tower Bolts 250mm long 3 Nos, Aluminium Handles
150mm long 2 Nos, 300mm long Aluminium Aldrops 1No, 125
10 mm long M.S.Powder Coated butt hinges 6Nos, 300 mm long
Aluminium Flat latch 1No, Door stoppers 2 Nos, MS Hold fasts
6Nos 300mm long including cost and convenyance of all
materials to site all Labour charges such as Fixing of Door Frame
1 Hardware
and shutter Fixing in position , with 3 fixtures etc., 3 11375.98 1 34127.94
complete for finsihed item of work. [Make Jyothi / Classic / no.
Supply and Fixing of Medium teak wood fully pannelled
Oxford]
windows of size 1.52 x 1.22 mm with frame size 85 x 90 mm and
shutter frame of size 75mm x 32mm thick for each shutter and
panet with 12mm thick prelaminated partical board (6 shutters:
3 at bottom and 3 at top) including all fixtures such as 12 Nos
11 75mm aluminium but hinges for six shutter, 6No.s of 100 mm
Aluminium towe bolts, 75mm door handles 3 Nos, 4 No.s MS Z
hold fasts, 12 No.s 10mm sq. bars placed harozonially, 6 No.s of
window appliances, 6 No.s of rubber bushes including all
materials and all labour charges for wrought and put up etc.,
complete for finished item of work.1 9 9 7585.06 1 68266

Supply and Fixing of Ventilator of size 1.20 x 0.30 with 25mm x 25mm x
12 3mm thick equal L angles and 10mm square rods @ 100mm c/c fixing in
position ,complete for finsihed item of work

VENTIALTORS size 1.20M x 3 4 12 750.00 1 9000

 Plain Cement Concrete corresponding to M15 grade as per IS 456
equivalent to (1:2:4) proportion nominal mix (cement: fine aggregate:
Coarse aggregate) using 20mm size Hard Blasted Granite (IS383, 1970)
Machine Crushed graded metal from approved quarry including cost and
13 conveyance of all materials like cement, sand, coarse aggregate, water etc.
to site, including seigniorage charges, sales & other taxes on all materials,
all operational, incidental and labour charges such as mixing, laying,
curing concrete, etc., complete for finished item of work (APSS No. 402)
SILL PLATES

For sill concrete 3 6 3.47 0.23 0.08 1.15

2 5 6.48 0.23 0.08 1.19
1 1 3.00 0.23 0.08 0.06
2 4 2.85 0.23 0.08 0.42
-1 3 1.22 0.23 0.05 -0.04
0.22
Say 3.00 4678 1 14035

Ornamental Plastering 12mm thick in two coats with base coat of 8mm
thick in CM (1:5) and top coat of 4mm thick in CM (1:3) dubara sponge
finish including cost and conveyance of all materials like cement, sand,
water etc., to site, seigniorage charges, sales & other taxes on all
14 materials,all operational, incidental and labour charges such as mixing
mortar, scaffolding charges, lift charges, including cutting of Grooves
wherever necessary as directed by Engineer - in - charge, finishing,
curing, etc., complete for Even Surfaces of Wall for finished item of
work. (APSS 901,903 & 904)
For class rooms 1 3 7.31 6.7 146.93
Verandah ceiling 1 1 25.62 1.80 46.12
2 3 1.80 0.30 3.24
Sides 3 2 6.70 0.45 18.09
Window sunshade 1 1 26.08 0.85 22.17
1 2 2.20 0.85 3.74
1 6 2.00 0.60 7.20
12.51

Say 260.00 383.29 1 99655

sqm
Plastering 12mm thick in two coats with base coat of 8mm thick in CM
(1:6) and top coat of 4mm thick in CM (1:4) dubara sponge finish
including cost and conveyance of all materials like cement, sand, water
etc., to site, seigniorage charges, sales & other taxes on all materials,all
15 operational, incidental and labour charges such as mixing mortar,
scaffolding charges, lift charges, including cutting of Grooves wherever
necessary as directed by Engineer - in - charge, finishing, curing, etc.,
complete for Even Surfaces of Wall for finished item of work. (APSS
901,903
ver. Inner&wall
904) 0.00
staircase 1 2 6.93 3.35 46.43
1 1 3.00 3.35 10.05
hand rail 2 1 3.65 2.00 14.6
ver. Outre wall 1 1 26.54 1.13 29.99
1 2 1.52 1.13 3.44
parapet wall 1 1 26.54 1.05 27.87
 1 2 1.52 1.05 3.19
For basement 1 2 25.62 1.00 51.24
1 2 8.45 1.00 16.9
-3 3 1.50 1.35 -18.23
-1 3 1.22 2.13 -7.8
For columns 1 8 1.20 2.15 20.64
30.17
Say 228.49 367.60 1 83993

Plastering 20mm thick in two coats with base coat of 16mm thick in CM
(1:6) and top coat of 4mm thick in CM (1:4) dubara sponge finish
including cost and conveyance of all materials like cement, sand, water
etc., to site, seigniorage charges, sales & other taxes on all materials, all
16 operational, incidental and labour charges such as mixing
mortar,scaffolding charges, lift charges, finishing,including cutting of
Grooves wherever necessary as directed by Engineer - in - charge, curing,
etc., complete for Uneven Surfaces of Brick Wall for finished item of
work. (APSS 901,903 & 904)
For outer side 1 1 26.08 3.60 93.89
1 2 7.38 3.60 53.14
1 1 26.08 3.23 84.24
1 2 2.00 1.50 6.00
1 1 26.08 1.25 32.60
1 2 1.80 1.25 4.50
For basement 1 2 26.08 1.00 52.16
1 2 9.15 1.00 18.30
parapet 1 1 26.08 0.90 23.47
1 1 3.00 0.90 2.70
0.00
for ramp 1 1 8.00 1.70 13.60
sides 1 1 3.70 0.50 1.85
sides 1 1 2.10 0.90 1.89
sides 1 1 1.70 0.90 1.53
for steps 1 1 1.50 1.20 1.80
18.34
Say 410.00 379.65 1 155658
Making Green Chalk Board of size 3.00Mx1.20Mts including border with
plastering in CM (1:2) 12mm thick as base coat and 3mm thick top coat
with cement green oxide powder in (1:1) prop. and making border of
50x20mm thick alround the chalk board over existing plastered surface
17 and painting the chalk board surface with chalk board paint as per
direction of Engineer-in-Charge including cost and conveyance of all
materials, sales and other taxes on cost of materials and all operational,
incidental and labour charges etc., complete for finished item of work
(APSS No.1603)
1 3 3 10200.00 1 30600
 Providing & Applying Synthetic Plaster Putty or Plaster of Paris Putty or
Lime punning of average 1 to 2mm thick over plastered surface to prepare
the surface even and smooth after thoroughly brushing the surface to
remove all dirt and remains of loose powdered materials, applying emery
paper, sand the surface, clean & wipe off loose dust, applying knifing
18
paste filler by putty knife/muslin pad, air dry for 2-3 hours, sand with 180
and 320 No, emery paper for the surface preparation including cost and
conveyance of all materials to site, sales & other taxes, all operational,
incidental and labour charges etc., complete for finished item of work for
internal walls.
rooms inside 1 3 28.02 3.23 271.51
staircase 1 2 6.93 3.35 46.43
1 1 3.00 3.35 10.05
hand rail 2 1 3.65 2.00 14.6
ver. Outre wall 1 1 26.54 1.13 29.99
1 2 1.52 1.13 3.44
parapet wall 1 1 26.54 1.05 27.87
1 2 1.52 1.05 3.19
For basement 1 2 25.62 1.00 51.24
1 2 8.45 1.00 16.9
-3 3 1.50 1.35 -18.23
-1 3 1.22 2.13 -7.8
For columns 1 8 1.20 2.15 20.64
For outer side 1 1 26.08 3.60 93.89
1 2 7.38 3.60 53.14
1 1 26.08 3.23 84.24
1 2 2.00 1.50 6.00
1 1 26.08 1.25 32.60
1 2 1.80 1.25 4.50
For basement 1 2 26.08 1.00 52.16
1 2 9.15 1.00 18.30
parapet 1 1 26.08 0.90 23.47
1 1 3.00 0.90 2.70
0.00
for ramp 1 1 8.00 1.70 13.60
sides 1 1 3.70 0.50 1.85
sides 1 1 2.10 0.90 1.89
sides 1 1 1.70 0.90 1.53
for steps 1 1 1.50 1.20 1.80
38.51

900.00 183.50 1 sqm 165151

Painting to New wood work with two coats of ready mixed synthetic
enamel paint first quality all shades to give an even shade over base coat
Primer with Luppam finishing after thoroughly brushing the surface to
19 remove all remains including cost and conveyance of all materials to site,
sales & other taxes, all operational, incidental and labour charges etc.,
complete for finished item of work.(3 coats) (APSS No. 1201 & 1212).in
All Floors

3 2.25 1.22 2.13 17.54

 9 2.75 1.5 1.22 45.29
7.17
say 70.00 169.70 1 11880

Painting to New Iron work with two coats of ready mixed synthetic
enamel paint first quality all shades over an existing steel primer including
20 cost and conveyance of all materials to site, sales & other taxes, incidental,
operational and all labour charges etc., complete for finished item of work.
(APSS No. 1201, 1207 & 1212).in All Floors

3 4 1.20 0.30 4.32

0.68
Say 5.00 95.50 1 478

Painting to New walls with two coats of acrylic interior emulsion paint
having VOC (Volatile Organic Compound) content less than 50 grams/
liter.of superior quality of approved brand and shade over base coat of
cement primer grade -I making three coats in all to give an even shade
after thoroughly brushing the surface to remove all loose powdered
21
materials, including cost and conveyance of all materials, including cost
and conveyance of all materials, cost of brushes, water to site, etc., sales &
other taxes, all operational, incidental and labour charges such as
scaffolding charges, lift charges, curing etc., complete for finished item of
work in all floors for Walls.(APSS No. 911) in All Floors INTERNAL

rooms inside 1 3 28.02 3.23 271.51

ver. Inner wall
staircase 1 2 6.93 3.35 46.43
1 1 3.00 3.35 10.05
hand rail 2 1 3.65 2.00 14.6
ver. Outre wall 1 1 26.54 1.13 29.99
1 2 1.52 1.13 3.44
parapet wall 1 1 26.54 1.05 27.87
1 2 1.52 1.05 3.19
For basement 1 2 25.62 1.00 51.24
1 2 8.45 1.00 16.9
-3 3 1.50 1.35 -18.23
-1 3 1.22 2.13 -7.8
For columns 1 8 1.20 2.15 20.64
For class rooms 1 3 7.31 6.7 146.93
Verandah ceiling 1 1 25.62 1.80 46.12
2 3 1.80 0.30 3.24
Sides 3 2 6.70 0.45 18.09
Window sunshade 1 1 26.08 0.85 22.17
1 2 2.20 0.85 3.74
1 6 2.00 0.60 7.20
32.68

750.00 147.45 1 110588

 Painting to New walls with two coats of Plastic Emulsion paint of superior
quality of approved brand and shade over base coat of cement primer
grade -I making three coats in all to give an even shade after thoroughly
brushing the surface to remove all loose powdered materials, including
22 cost and conveyance of all materials, including cost and conveyance of all
materials, cost of brushes, water to site, etc., sales & other taxes, all
operational, incidental and labour charges such as scaffolding charges, lift
charges, curing etc., complete for finished item of work in all floors for
Walls.(APSS No. 912) in All Floors external

For outer side 1 1 26.08 3.60 93.89

1 2 7.38 3.60 53.14
1 1 26.08 3.23 84.24
1 2 2.00 1.50 6.00
1 1 26.08 1.25 32.60
1 2 1.80 1.25 4.50
For basement 1 2 26.08 1.00 52.16
1 2 9.15 1.00 18.30
parapet 1 1 26.08 0.90 23.47
1 1 3.00 0.90 2.70
for ramp 1 1 8.00 1.70 13.60
sides 1 1 3.70 0.50 1.85
sides 1 1 2.10 0.90 1.89
sides 1 1 1.70 0.90 1.53
for steps 1 1 1.50 1.20 1.80
58.34
450.00 200.70 1 sqm 90316

Flooring with Soluble salt porcelain vitrified tiles screen printed and
polished of size 600 x 600 mm and thickness between 8-10 mm 1st quality
conforming to IS:13711, IS:13712,IS:13630 (Parts 1 to 15) of any colour
and finish in all shades and Designs set over a base coat of CM (1:8),
12mm thick (joints of stone must be flushed) over C.C. bed already laid or
R.C.C. roof slab only after it is properly cured, cleaned, moistered and
where necessary treated with neat grey cement slurry of honey like
23
consistency spred at3.3 kgs of cement for 1 sqm. and jointed with neat
cement paste to full depth, including cost and conveyance of all materials
like cement, sand, water, flooring stones etc. to site, seigniorage charges,
sales and other taxes on all materials, all operational, incidental and labour
charges such as dressing of flooring stones to the required sizes, mixing of
cement mortar, laying, jointing, curing, lift charges etc., complete for
finished item of work.(APSS No.703 & 701

For class rooms 1 3 7.31 6.7 146.93

Staircase area 1 1 6.70 3.30 22.11
Verandah 1 1 25.62 2.00 51.24
9.72
Say 230 1628.27 1 374502
 Providing skirting to internal walls to 10 cm height with vitrified tiles
8mm thick , regular finish and normal colour, length equal to flooring
tiles, set over base coat of CM(1:5) 12 mm thick using screened sand with
cement slurry of honey like consistency spread at the rate of 3.30 kgs per
24
sqm and jointing with white cement paste mixed with pigment of
matching shade to full depth, including cost of all materials like tiles,
cement, sand and water etc.,and overheads & contractors profit complete
for finished item of work.(APSS No.701 &707)
1 3 28.00 0.10 8.40
Staircase area 1 1 20.00 0.10 2.00
Verandah 1 1 22.62 0.10 2.26
1 1 25.62 0.10 2.56
2 1 1.75 0.10 0.35
Providing High Yield Strength Deformed (HYSD) steel bars (Fe 415 grade 4.43
as per IS 1786-1985) of 8mm to 40mm diameters, cutting, Say bending, 20.00
to 1071.85 1 21437
required sizes and shapes placing in position with cover blocks of
approved size and binding wire of 20SWG, forming grills for
reinforcement work as per approved designs and drawings including cost
25 and conveyance of bars from approved sources to site of work, including
cost and conveyance of binding wire, cover blocks, chairs, overlaps,
spacers, dowels, wastage etc., and all operational, incidental, and labour
charges such as cutting, bending, placing in position, tying etc., and sales
& other taxes,on cost of all materials complete for finished item of11.000
work 49348.45 1 542833
(APSS No.126) in all floors.
Flooring with Red or White Non skid Full Body Ceramic Tiles of MTsize 300
x 300 mm and 7 to 8mm thick 1st. quality over a base coat of CM (1:8),
12mm thick laid over flooring bed / V.R.C.C. slab, with neat grey cement
slurry of honey like consistency spread at the rate of 3.3 Kgs of cement
per Sq.m and jointed with neat white cement paste mixed with pigment of
26
matching shade including cost and conveyance of all materials like
cement, sand, water, ceramic tiles etc. to site, seigniorage charges, sales
and other taxes on all materials, all operational, incidental and labour
charges such as mixing of cement mortar, laying, curing, lift charges etc.,
complete for finished item of work.(APSS
1 1 No.701
3.8 &4.2707) 15.96
Verandah 1 12 1.4 0.45 7.56
1 11 1.40 0.45 6.93
1 1 3.3 1.5 4.95
Say 35.4 791.40 1 28016

Plain Cement Concrete M20 Design Mix ( by weigh batching ) using

20mm size (SS5) hard blasted granite machine crushed graded metal
(Coarse aggregate) from approved quarry, using a minimum quantity of
350 kgs. of cement per 1 cum of concrete including cost and conveyance
28 of all materials like cement, fine aggregate (Sand), coarse aggregate,
water etc., to site and cost of seigniorage charges on all materials
including steel centering, shuttering, machine mixing, laying concrete, lift
charges, curing etc., complete for finished item of work for steps (APSS
No. 402 )

For steps 0.5 22 1.5 0.3 0.15 0.74

0.26
say 1.00 6040.05 1 6040
 Supply and Fixing of iron grill for window with 25mm x 25mm x 3mm
29 thick of size 1.5x1.35 M equal L angles and 10mm square rods @ 150mm
c/c fixing in position ,complete for finsihed item of work

Providing impervious coat over RCC 1 roof

3 slab to required slopes with 3.00
CM
(1:3) prop. 20mm thick (average) mixed with Two component say sysem High
3.00 3000.00 1 9000
durable cementitious acrylic based waterproofing systems : Complies with
ASTM Dcompound manufactured by reputed manufacturers as approved
by Engineer-in-charge at 1Kg/bag of cement, laid over roof slab when it is
green, finished smooth with a floating coat of neat cement and thread
21 lining at regular intervals of 45cmx45cm including cost and conveyance of
all materials like cement, sand, water proofing compound, water etc., to
site, seigniorage charges, sales & other taxes on all materials, all
operational, incidental and labour charges such as mixing mortar, laying,
rounding off at junctions of wall and slab, rendering smooth with thread
For class
lining, roomslift charges, etc., complete
curing, 1 1 for 7.3 6.6item of work (APSS
finished 48.18
No. 901 & 903). 1.82
say 50.00 395.40 1 19770

GROUND FLOOR TOTAL: 3523488

Assistant Engineer, Dy.Executive Engineer, Executive Engineer,

APEWIDC, Srikakulam APEWIDC, Srikakulam APEWIDC, Srikakulam
 DETAILED CUM ABSTRACT ESTIMATE
Name of the Work :construction of the Additional class rooms to Govt Jr college at Palasa (V&M) in
Srikakulam

FIRST FLOOR
SNo Vibrated Reinforced
Description of Cement
work ConcreteNoM 20 DesignL Mix B( by Batching
D Plant
Qty ) Rate Per Amount
using 20mm size (SS5) hard granite machine crushed graded metal (Coarse
aggregate) from approved quarry, using a minimum quantity of 350 kgs. of
cement per 1 cum of concreteincluding cost and conveyance of all materials
like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and
1 cost of seigniorage charges on all materials including centering using
Cashewrina Ballies and Wooden runners & staging including all bracings, cross
members etc., shuttering , machine mixing, laying concrete, vibrating,lift
charges, curing etc., complete but excluding cost of steel and it’s fabrication
charges for finished item of work (APSS No. 402 & 403) For coloumns , Lintels,
a Water
Columns up to
tanks, RccTop of Floor
walls Beam
in building
0.78 12 0.3 0.3 2.15 1.81
C8 1 2 0.23 0.375 2.15 0.37
C3 1 2 0.23 0.45 1.30 0.27
C3 3 2 0.23 0.38 3.17 1.64
C4 1 2 0.23 0.38 3.02 0.52
C5 2 2 0.23 0.38 3.17 1.09
C6 1 2 0.23 0.38 3.17 0.55
C7 2 8 0.23 0.45 3.02 5.00
0.78 2 0.375 0.375 2.15 0.47
0.78 12 0.3 0.3 0.8 0.67
0.78 2 0.375 0.375 0.8 0.18
1 2 0.23 0.38 0.72 0.12
1 2 0.23 0.45 1.55 0.32
Say 13.01 10279.75 1 133772
b Roof beams in GF
1 1 3.37 0.23 0.30 0.23
2 4 7.15 0.23 0.45 5.92
B13 1 2 7.15 0.23 0.3 0.99
B15 1 2 7.15 0.23 0.3 0.99
B16 1 2 7.15 0.23 0.45 1.48
Longbeam B9 1 8 2.00 0.23 0.23 0.85
B10 2 12 2.82 0.23 0.3 4.67
Verandah beam 1 1 3.37 0.23 0.425 0.33
Staircase beam 1 2 3.37 0.23 0.3 0.47
1 1 40.4 0.23 0.23 2.14
Say 18.07 9103.80 1 164506
c Roof slab 125 mm thick
1 2 18.80 9.95 374.12
Staircase front 1 1 3.37 4.65 15.67
Say 389.79 1024.60 1 399379
c Roof slab 200 mm thick
1 1 3.60 1.50 5.40
1 1 3.30 1.50 4.95
1 1 3.60 1.50 5.40
 Say 15.75 1417.80 1 22330
d LINTELS: (RCC)
1 1 40.38 0.23 0.3 2.79
1 2 2 0.23 0.3 0.28
2 4 1.6 0.23 0.15 0.44
Rearside 4 4 1.6 0.23 0.15 0.88
Say 4.39 10135.50 1 44495

e Sun Shades of 0.6 mtrs of avearage thick of 0.0625 mtrs

1 1 40.38 0.60 24.23
Right&Left 1 2 2.7 0.60 3.24
3 4 1.6 0.60 11.52

Providing impervious coat over RCC roof slab to required slopes Saywith CM38.99
(1:3) 733.15 1 28586
prop. 20mm thick (average) mixed with water proofing compound
manufactured by reputed manufacturers as approved by Engineer-in-charge at
1Kg/bag of cement, laid over roof slab when it is green, finished smooth with a
floating coat of neat cement and thread lining at regular intervals of
2 45cmx45cm including cost and conveyance of all materials like cement, sand,
water proofing compound, water etc., to site, seigniorage charges, sales &
other taxes on all materials, all operational, incidental and labour charges such
as mixing mortar, laying, rounding off at junctions of wall and slab, rendering
smooth with thread lining, curing, lift charges, etc., complete for finished item
of work (APSS No. 901 & 903). 1 2 18.3 8.9 325.74
Staircase front 1 1 3.6 4.2 15.12
1 4 18.3 0.3 21.96
1 1 3.6 0.3 1.08
Say 363.9 427.80 1Sqm 155676
Sqm
Brick Masonry in superstructure with CM (1:8) prop: using second class bricks
3 from approved source having minimum crushing strength of 40 Kg/Sqcm.
including cost and conveyance of all materials like cement, sand, bricks, water
etc., to site, including sa
2 6 2.75 0.23 0.80 6.07
Cross walls 1 1 3.20 0.23 0.80 0.59
1 2 2.00 0.23 0.80 0.74
2 4 2.82 0.23 0.75 3.89
2 4 2.82 0.23 0.75 3.89
2 4 2.82 0.23 0.75 3.89
2 4 2.98 0.23 0.75 4.11
2 2 2.90 0.23 0.75 2.00
1 1 3.37 0.23 1.30 1.01
2 4 2.82 0.23 1.35 7.00
Cross walls 2 4 2.82 0.23 1.35 7.00
2 4 2.82 0.23 1.35 7.00
2 4 2.98 0.23 1.35 7.40
2 2 2.90 0.23 1.35 3.60
1 1 3.37 0.23 1.35 1.05
-2 4 1.22 0.23 2.13 -4.78
 -4 4 1.20 0.23 1.35 -5.96
2 4 2.98 0.23 1.02 5.59
Cross walls 2 2 2.90 0.23 0.85 2.27
2 4 2.82 0.23 1.02 5.29
2 4 2.82 0.23 1.02 5.29
2 4 2.80 0.23 1.02 5.26
-3 4 1.22 0.23 0.30 -1.01
2 6 2.87 0.23 0.90 7.13
Cross walls 1 2 3.60 0.23 0.90 1.49
1 1 3.30 0.23 0.90 0.68
1 2 2.00 0.23 0.90 0.83
-4 12 0.70 0.23 0.17 -1.31
0.5 12 1.50 0.30 0.15 0.41
0.5 11 1.50 0.30 0.15 0.37
hand railing 1 1 4.00 0.12 0.80 0.37
1 1 3.80 0.12 0.80 0.35
1 1 1.50 0.12 0.80 0.14
1 2 3.30 0.23 0.15 0.23
1 4 3.70 0.12 0.20 0.34
1 8 1.50 0.12 0.20 0.28
Say 82.50 5765.70 1 475670
Reinforced Brick Masonry 11.5cm (4 1/2") thick for partition walls in CM (1:4)
prop: using second class bricks from approved source having minimum crushing
strength of 40 Kg/Sqcm. and placing 2nos. of 6mm dia MS bars embedded in
every 3rd layer with free ends of reinforcement keyed into mortar joints of the
main brick work whereever applicable including cost and conveyance of all
4 materials like cement, sand, bricks, water etc., to site, seigniorage charges,
sales & other taxes on all materials, all operational, incidental and labour
charges such as mixing cement mortar, constructing masonry, scaffolding
charges, lift charges, curing, etc., but excluding cost and conveyance of steel
and its fabrication charges complete for finished item of work. (APSS No. 501 &
504).
at staircase hand railing 2 1 4.5 0.75 6.75
0.25
Say 7.00 694.35 1 4860.45

Supply and Fixing of Door with Double leaf shutter, Door Size 1.22x2.13 mtrs
with Medium teak wood Frame of sections size 75mm x 100mm with Flush
Door Shutter Solid Bond Wood black board type with commercial ply on both
faces of 35mm thick including cost of fixtures such as M.S.Powder Coated
Tower Bolts 250mm long 2 Nos, Alluminimum Handles 150mm long 2 Nos,
4 300mm long M.S.Powder Coated Aldrops 1No, 125mm long M.S.Powder
Coated butt hinges 6Nos, 300 mm long M.S.Powder Coated Flat latch 1No,
Door stoppers 2 Nos, MS Hold fasts 6Nos, Sales and Other Taxes cost and
convenyance of all materials to site all Labour charges such as Fixing of Door
Frame on shutter Fixing in position , with Hardware fixtures etc., complete for
finsihed utem of work.
1 8 8 10677.49 1 85419.905
 Supplying and fixing of Unplasticised Poly Vinyl Chloride(UPVC) 3 track sliding
doors with mesh shutter – (2-glass shutters and 1-mesh shutter)- 95 - Series
dulymanufactured using UPVC reinforced profiles(Composition of profile shall
consists a minimum of 5.5PHR of TiO2 and not more than 12 PHR of CaCo3
forevery 100 parts of PVC resin) of (108 mm x 45mm)/(95.50 mm x 60 mm) x
2.20 mm for outer frames, (75mm x 39 mm)/(66 mm x 42 mm) x 2.20 mm for
slidingdoor shutter frames capable of mounting single glazingsystem,
structurally reinforced with hot dip galvanized upto 50 microns of minimum
thickness of 1.2 mmprefabricated & welded through fusion welding the
5 doorsash shall be fitted with 6 mm thick clear float glass ofreputed make duly
fixed with Grey colour TPV Gasket for sash & Glazing bead shall be co-extruded
with Greycolour soft PVC. Mesh shutter shall be made of (48 mm x30 mm))/(50
mm x 26.5 mm) x 2.0 mm uPVC profilesection and fitted with Vinyl Coated Fiber
mesh androllers/ pulley duly fixed with TPV Gaskets weathering sealresistant
Door shall be provided with standard 4hardware
4 &multi
1.20 point locking
1.35system of
25.92
Patio/Roto espagulate and the system is to be installed at the site using anchor
fasteners, silicon rubber sealant, easy1 glazing/
2 deglazingat
1.20 1.35 including
site etc., 3.24
cost and conveyance of all materials, accessories, labour charges29.16 for 7500.00 1 218700
transportation, erection at site complete for finished item of work.
Supply and Fixing of Ventilator of size 1.20 x 0.30 with 25mm x 25mm x 3mm
6 thick equal L angles and 10mm square rods @ 100mm c/c fixing in position
,complete for finsihed item of work

3 4 12
3 4 12
24 750.00 1 18000

Supply and Fixing of Iron Grills for windows of size 1.20 x 1.35 with 25mm x
7 25mm x 3mm thick equal L angles and 12mm square rods @ 100mm c/c fixing
in position ,complete for finsihed item of work

4 4 16
4 4 16
32 2200.00 1 70400

Supply and Fixing of Iron Grills Door with 35x35x3mm thick equal l-anglesand
8 12mm square rods @ 150mm c/c fixing in position ,complete for finsihed item
of work

1 1 1.3 3.15 4.095

1 1 1.15 2.4 2.76
6.855 1 10861.00 1 35000
Plain Cement Concrete corresponding to M10 grade as per IS 456 equivalent to
(1:3:6) proportion nominal mix (cement: fine aggregate: Coarse aggregate)
using 20mm size Hard Blasted Granite (IS383, 1970) Machine Crushed graded
metal from from approved quarry including cost and conveyance of all
9 materials like cement, sand, coarse aggregate, water etc. to site, including
seigniorage charges, sales & other taxes on all materials, all operational,
incidental and labour charges such as mixing, laying, curing concrete, etc.,
complete for finished item of work for Dummy columns
2 4 2.82 0.23 0.05 0.26
Cross walls 2 4 2.82 0.23 0.05 0.26
2 4 2.82 0.23 0.05 0.26
2 4 2.82 0.23 0.05 0.26
2 2 2.90 0.23 0.05 0.13
1 4 3.60 1.50 0.08 1.62

Say 2.79 4023.90 1 11227

 Ornamental Plastering 12mm thick in two coats with base coat of 8mm thick in
CM (1:5) and top coat of 4mm thick in CM (1:3) dubara sponge finish including
cost and conveyance of all materials like cement, sand, water etc., to site,
seigniorage charges, sales & other taxes on all materials,all operational,
10
incidental and labour charges such as mixing mortar, scaffolding charges, lift
charges, including cutting of Grooves wherever necessary as directed by
Engineer - in - charge, finishing, curing, etc., complete for Even Surfaces of
Wall for finished item of work. (APSS 901,903 & 904)
1 4 8.91 6.68 238.08
Beam sides 2 8 6.68 0.45 48.10
Verandah 1 1 39.90 2.00 79.80
Sunshades 2 6 2.00 0.23 5.52
Sunshades 1 1 3.37 2.00 6.74
1 2 3.37 0.23 1.55
1 2 3.60 1.50 10.80
1 1 3.37 1.50 5.06

Say 395.65 424.48 1 167945

Plastering 12mm thick in two coats with base coat of 8mm thick in CM (1:6)
and top coat of 4mm thick in CM (1:4) dubara sponge finish including cost and
conveyance of all materials like cement, sand, water etc., to site, seigniorage
charges, sales & other taxes on all materials,all operational, incidental and
11 labour charges such as mixing mortar, scaffolding charges, lift charges,
including cutting of Grooves wherever necessary as directed by Engineer - in -
charge, finishing, curing, etc., complete for Even Surfaces of Wall for finished
item of work. (APSS 901,903 & 904)

A Internal walls
1 4 31.15 3.47 432.36
Deduct Doors -1 8 1.22 2.13 -20.79
Deduct windows -1 16 1.20 1.35 -25.92
-3 4 1.20 0.30 -4.32
1 1 39.95 1.35 53.93
c/w 1 2 2.00 1.35 5.40
front wall 1 2 18.30 0.90 32.94
front wall 1 2 2.00 0.90 3.60
portico 1 2 3.60 0.90 6.48
portico 1 1 3.30 0.90 2.97
stair case landing bottam 1 1 3.30 1.30 4.29
dedeuct windows 1 -1 1.50 1.20 -1.80
dedeuct windows 1 1 3.30 1.70 5.61
crass walls 1 2 6.90 3.60 49.68
ramp 1 2 4.00 0.92 7.36
ramp 1 2 3.80 0.92 6.99
ramp 1 2 1.50 0.90 2.70
for stepd top 1 12 1.40 0.30 5.04
for stepd top 1 11 1.40 0.30 4.62
for risers 1 12 1.40 0.15 2.52
for risers 1 11 1.40 0.15 2.31
 for sun shade bottam 1 1 40.35 0.60 24.21
for sun shade bottam 1 2 2.70 0.60 3.24
landing bottam 2 6 2.70 0.23 7.45
landing bottam 1 1 3.30 0.23 0.76
landing bottam 1 2 2.00 0.23 0.92
slab projection 1 1 41.00 0.30 12.3
slab projection 1 2 10.20 0.30 6.12
back side 1 2 18.45 0.30 11.07
back side 1 1 1.80 0.60 1.08
back side 3 4 1.60 0.60 11.52
for columns all round 2 7 1.15 1.25 20.13

Say 674.77 404.75 1 273113

Plastering 20mm thick in two coats with base coat of 16mm thick in CM (1:6)
and top coat of 4mm thick in CM (1:4) dubara sponge finish including cost and
conveyance of all materials like cement, sand, water etc., to site, seigniorage
charges, sales & other taxes on all materials, all operational, incidental and
12
labour charges such as mixing mortar,scaffolding charges, lift charges,
finishing,including cutting of Grooves wherever necessary as directed by
Engineer - in - charge, curing, etc., complete for Uneven Surfaces of Brick Wall
for finished item of work. (APSS 901,903 & 904)

B External Walls-

for curten walls 1 1 40.45 1.37 55.42

for curten walls 1 2 2.23 1.37 6.11
ver front side 1 2 18.30 3.47 127.00
back side 1 1 40.45 3.60 145.62
back side 1 2 7.37 3.60 53.06
sunshade top 1 1 18.45 0.65 11.99
sunshade top 1 2 2.50 0.65 3.25
sun shade top back side 3 4 1.60 0.65 12.48
sun shade top back side 1 1 1.80 0.65 1.17
for front wall 1 1 18.45 0.90 16.61
for front wall 1 1 18.45 0.90 16.61
for front wall 1 2 2.00 0.90 3.60
top 1 2 2.00 0.23 0.92
top 2 6 2.80 0.23 7.73
portico 1 2 4.00 0.90 7.20
portico 1 1 3.90 0.90 3.51
top 1 2 4.00 0.23 1.84
portico door side 1 1 3.30 0.23 0.76

Say 474.87 416.85 1 197950

 Making Green Chalk Board of size 3.00Mx1.20Mts including border with
plastering in CM (1:2) 12mm thick as base coat and 3mm thick top coat with
cement green oxide powder in (1:1) prop. and making border of 50x20mm
thick alround the chalk board over existing plastered surface and painting the
13 chalk board surface with chalk board paint as per direction of Engineer-in-
Charge including cost and conveyance of all materials, sales and other taxes on
cost of materials and all operational, incidental and labour charges etc.,
complete for finished item of work (APSS No.1603)

1 4 3.6 1.2 17.28 603.85 1 10435

Painting to New wood work with two coats of ready mixed synthetic enamel
paint first quality all shades to give an even shade over base coat Primer with
Luppam finishing after thoroughly brushing the surface to remove all remains
14
including cost and conveyance of all materials to site, sales & other taxes, all
operational, incidental and labour charges etc., complete for finished item of
work.(3 coats) (APSS No. 1201 & 1212).in All Floors

8 2.25 1.22 2.13 46.77

say 46.77 169.70 1 7938

Painting to New Iron work with two coats of ready mixed synthetic enamel
paint first quality all shades over an existing steel primer including cost and
15 conveyance of all materials to site, sales & other taxes, incidental, operational
and all labour charges etc., complete for finished item of work. (APSS No. 1201,
1207 & 1212).in All Floors

1 16 1.20 1.35 25.92

4 3 1.20 0.30 4.32
1 1 1.30 3.15 4.095
1 1 1.15 2.40 2.76
Say 37.10 95.50 1 3543

Painting to New walls with two coats of acrylic interior emulsion paint having
VOC (Volatile Organic Compound) content less than 50 grams/ liter.of superior
quality of approved brand and shade over base coat of cement primer grade -I
making three coats in all to give an even shade after thoroughly brushing the
surface to remove all loose powdered materials, including cost and conveyance
16
of all materials, including cost and conveyance of all materials, cost of brushes,
water to site, etc., sales & other taxes, all operational, incidental and labour
charges such as scaffolding charges, lift charges, curing etc., complete for
finished item of work in all floors for Walls.(APSS No. 911) in All Floors
INTERNAL
1 4 8.90 6.68 237.81
ver columns 1 1 39.90 2.00 79.80
back sides 8 2 6.68 0.45 48.10
ver beam 2 6 2.00 0.23 5.52
stair case portico 1 1 3.35 2.00 6.70
back 1 2 3.35 0.23 1.54
waist slab bottam 1 2 3.60 1.50 10.80
landing 1 1 3.35 1.50 5.03
class room off sets 1 4 31.00 3.45 427.80
 deduct doors -4 4 1.20 1.35 -25.92
windows -2 4 1.22 2.13 -20.79
ventilaters -3 4 1.20 0.30 -4.32
columns 4 4 0.20 3.00 9.60
stair case bottam 1 2 6.68 3.47 46.36
stair case bottam 1 1 3.35 1.50 5.03
stair case 1 1 3.35 1.90 6.37
dedct ventilaters -1 1 1.20 1.35 -1.62
sunshade bottam 1 2 1.60 0.60 1.92
sunshade bottam 4 3 1.60 0.60 11.52
sunshade bottam 1 1 40.35 0.60 24.21
sunshade bottam 1 2 2.70 0.60 3.24
for sides 1 2 4.00 0.85 6.80
for sides 1 2 4.20 0.85 7.14
room columns 1 1 6.68 3.30 22.04
room columns 1 1 3.60 0.75 2.70
for head room 1 2 6.68 2.90 38.74
for head room 1 1 3.30 2.70 8.91
for head room 1 1 3.30 3.05 10.07
deduct doors -1 1 1.22 2.13 -2.60
dummy columns 2 6 1.36 0.80 13.06
parapet i/s 1 2 18.00 0.90 32.40
sides 1 1 39.95 0.90 35.96
sides 1 1 6.50 0.90 5.85
c/w 1 2 8.90 0.90 16.02
head room 1 2 7.10 2.80 39.76
crass walls 1 2 3.80 2.70 20.52

1136.07 147.45 1 167514

Painting to New walls with two coats of Plastic Emulsion paint of superior
quality of approved brand and shade over base coat of cement primer grade -I
making three coats in all to give an even shade after thoroughly brushing the
surface to remove all loose powdered materials, including cost and conveyance
17
of all materials, including cost and conveyance of all materials, cost of brushes,
water to site, etc., sales & other taxes, all operational, incidental and labour
charges such as scaffolding charges, lift charges, curing etc., complete for
finished item of work in all floors for Walls.(APSS No. 912) in All Floors

f.f ver 1 2 18.50 3.47 128.39

crass walls 1 1 39.80 1.32 52.54
crass walls 1 2 2.00 1.32 5.28
front wall i/s 1 2 2.00 0.90 3.60
front sides 1 2 18.50 0.90 33.30
front 1 2 3.60 0.90 6.48
 front 1 1 3.30 0.90 2.97
for columns 1 14 1.15 1.30 20.93
bottam 1 2 2.30 0.90 4.14
top 1 2 2.00 0.23 0.92
front 1 2 18.60 0.90 33.48
front 1 2 3.60 0.90 6.48
front 1 1 3.55 0.90 3.20
drft top 2 6 2.70 0.23 7.45
drft top 1 2 3.60 0.23 1.66
drft top 1 1 3.30 0.23 0.76
curtion wall 1 1 40.40 1.40 56.56
curtion wall 1 2 2.30 1.40 6.44
sunshade top 1 1 40.10 0.65 26.07
sunshade top 1 2 2.60 0.65 3.38
back side 1 1 40.40 3.60 145.44
sunshade top 2 12 1.60 0.65 24.96
sunshade top 1 2 1.60 0.65 2.08
columns 2 7 1.15 2.15 34.62
columns 1 2 1.25 3.15 7.88
columns 1 3 3.70 0.82 9.10
for c/w 1 2 7.35 3.60 52.92
front sides 1 1 40.40 0.90 36.36
front sides 1 1 40.40 0.23 9.29
back side 1 2 18.50 0.90 33.30
back side 1 2 18.30 0.23 8.42
c/w 1 2 8.90 0.90 16.02
c/w 1 2 8.90 0.23 4.09
front sides 1 1 6.50 0.90 5.85
front sides 1 2 3.60 10.00 72.00

Flooring with Nano polished vitrified floor tiles of 1st quality and make as
866.36 200.70 1 sqm 173878
approved by Engineer-in-charge of size not less than 600 mm x 600 mm , 8mm
thickness double charge finish and normal colours with borders and design as
per the approved flooring pattern as directed by the Engineer-In -Charge, laying
tiles using spacers of 2mm thick, set over a base coat of CM (1:8) prop.
12mm thick using screened sand over CC bed already laid or RCC roof slab ,
including neat cement slurry of honey like consistancy spread @ 3.3 kgs per
18
Sqm. and jointed neately with white cement paste to full depth mixed with
pigment of matching shade including cost and conveyance of all materials
like cement, sand, water, tiles, white cement etc., to site (excluding cost of
C.C. bed) including cost of base coat and all labour charges for mixing of
cement mortar, laying tiles to required slope as directed by the Engineer-
1
in-charge etc.,and overheads & contractors 4profit complete
8.9 6.68 237.81
for finished item of
work. (APSS No.701 & 707)
Verandah 1 1 39.95 2.05 81.90
1 1 3.30 2.00 6.60
Say 326.31 1112.50 1 363020
 Providing skirting to internal walls to 10 cm height with vitrified tiles 8mm thick
, regular finish and normal colour, length equal to flooring tiles, set over base
coat of CM(1:5) 12 mm thick using screened sand with cement slurry of honey
19 like consistency spread at the rate of 3.30 kgs per sqm and jointing with white
cement paste mixed with pigment of matching shade to full depth, including
cost of all materials like tiles, cement, sand and water etc.,and overheads &
contractors profit complete for finished item of work.(APSS No.701 &707)

1 4 25.5 0.10 10.20

at verandah 1 4 6.70 0.25 6.70
1 2 2 0.10 0.40
2 2 18.50 0.10 7.40
1 2 2.05 0.10 0.41
Say 25.11 1108.10 1 27824
Providing High Yield Strength Deformed (HYSD) steel bars (Fe 415 grade as per
IS 1786-1985) of 8mm to 40mm diameters, cutting, bending, to required sizes
and shapes placing in position with cover blocks of approved size and binding
wire of 20SWG, forming grills for reinforcement work as per approved designs
and drawings including cost and conveyance of bars from approved sources to
20
site of work, including cost and conveyance of binding wire, cover blocks,
chairs, overlaps, spacers, dowels, wastage etc., and all operational, incidental,
and labour charges such as cutting, bending, placing in position, tying etc., and
sales & other taxes,on cost of all materials complete for finished item of work
(APSS No.126) in all floors.
0.727
0.752
5.771
0.223
7.473 50407.45 1 376695
MT
FIRST FLOOR TOTAL: 3637876

Assistant Engineer, Dy.Executive Engineer, Executive Engineer,

APEWIDC, Palasa APEWIDC, Tekkali APEWIDC, Srikakulam
 WORKING ESTIMATE
Name of the work : Improving Infrastructure Facilities to Govt.Polytechnic at Srikakulam (V&M) in
Srikakulam District
Under Nadu - Nedu
FIRST FLOOR
Vibrated Reinforced Cement Concrete M 20 Design Mix ( by Batching
SNo Description
Plant ) using 20mm size (SS5) hard L
of work No blasted BgraniteDmachine
Qtycrushed Rate Per Amount
graded metal (Coarse aggregate) from approved quarry, using a minimum
quantity of 350 kgs. of cement per 1 cum of concreteincluding cost and
conveyance of all materials like cement, fine aggregate (Sand), coarse
aggregate, water etc., to site and cost of seigniorage charges on all
1
materials including centering using Cashewrina Ballies and Wooden
runners & staging including all bracings, cross members etc., shuttering ,
machine mixing, laying concrete, vibrating,lift charges, curing etc.,
complete but excluding cost of steel and it’s fabrication charges for
a) finished
Columnsitem of work for foundation, plinth , pedastals(below plinth)
(APSS No. 402 & 403)
For Columns 1 12 0.3 0.45 3.35 5.43
1 6 0.23 0.23 3.35 1.06
0.51
Say 7.00 10279.75 1 71958
b Roof beams in GF
For long beams 1 2 18.54 0.23 0.3 2.56
Internal RB 1 6 7.38 0.3 0.45 5.98
ver.c/beam 1 4 1.8 0.23 0.23 0.38
ver.beam 1 1 18.54 0.23 0.3 1.28
1 2 1.75 0.23 0.30 0.24
0.56
Say 11.00 9103.80 1 100142
c Roof slab 175 mm thick
1 1 3.6 1.50 5.40
Midlanding 1 1 3.3 1.73 5.71
1 1 3.6 1.50 5.40
2.49
Say 19.00 1024.60 1 19467
d Roof slab 125 mm thick
1 1 19.14 7.53 144.12
deduct staircase -1 1 4.5 3 -13.5
4.38
Say 135.00 1024.60 1 138321
E Roof slab 100 mm thick
1 1 19.14 2.05 39.24
0.76
Say 40.00 897.30 1 35892
e LINTELS: (RCC)
over openings 2 4 3.47 0.23 0.15 0.96
0.54
Say 1.500 9796.30 1 14694

f Sun Shades of 0.6 mtrs of avearage thick of 0.0625 mtrs

For verandha 1 1 18.54 0.60 11.12
1 2 2.8 0.60 3.36
 For windows 1 4 1.8 0.60 4.32
1.20
Say 20.00 733.15 1 14663

Brick Masonry in superstructure with CM (1:8) prop: using second class

bricks from approved source having minimum crushing strength of 40
Kg/Sqcm. including cost and conveyance of all materials like cement,
2 sand, bricks, water etc., to site, including sales & other taxes on all
materials, all operational, incidental and labour charges such as mixing
cement mortar, constructing masonry, scaffolding charges, lift charges,
curing, etc., complete for finished item of work. (APSS No. 501 & 504).

For building 2 4 3.47 0.23 3.47 22.16

1 4 6.48 0.23 3.03 18.06
1 2 3.00 0.23 3.30 4.55
parapet wall 1 9 3.54 0.23 0.90 6.6
1 1 6.48 0.23 0.90 1.34
For draft wall 1 4 3.47 0.23 0.95 3.03
1 1 2.93 0.23 0.95 0.64
1 2 1.60 0.23 0.95 0.7
Deduction doors -1 2 1.22 0.23 2.13 -1.20
Deduction windows -2 3 1.50 0.23 1.35 -2.79
-2 3 1.50 0.23 0.30 -0.62
-2 1 1.20 0.23 0.30 -0.17
room dias 2 1 3.00 1.50 0.30 2.70
Supply and Fixing of Door with Double leaf shutter, Door Size 5.00
1.22x2.13 mtrs with Medium teak wood Frame of sections size
75mm x 100mm with Shutter with MDF board both sideSay 60.00 5765.70 1 345942
laminated of 35mm thick including cost of fixtures such as
Aluminium Tower Bolts 250mm long 3 Nos, Aluminium Handles
150mm long 2 Nos, 300mm long Aluminium Aldrops 1No, 125
3 mm long M.S.Powder Coated butt hinges 6Nos, 300 mm long
Aluminium Flat latch 1No, Door stoppers 2 Nos, MS Hold fasts
6Nos 300mm long including cost and convenyance of all
materials to site all Labour charges such as Fixing of Door Frame
1 Hardware
and shutter Fixing in position , with 2 fixtures etc., 2 11375.98 1 22751.96
complete for finsihed item of work. [Make Jyothi / Classic / No 1 No
Supply and Fixing of Medium teak wood fully pannelled
Oxford]
windows of size 1.52 x 1.22 mm with frame size 85 x 90 mm and
shutter frame of size 75mm x 32mm thick for each shutter and
panet with 12mm thick prelaminated partical board (6 shutters:
3 at bottom and 3 at top) including all fixtures such as 12 Nos
4 75mm aluminium but hinges for six shutter, 6No.s of 100 mm
Aluminium towe bolts, 75mm door handles 3 Nos, 4 No.s MS Z
hold fasts, 12 No.s 10mm sq. bars placed harozonially, 6 No.s of
window appliances, 6 No.s of rubber bushes including all
materials and all labour charges for wrought and put up etc.,
complete for finished item of work.1 6 6 7585.05 1 45510
no

Supply and Fixing of Ventilator of size 1.20 x 0.30 with 25mm x 25mm x
5 3mm thick equal L angles and 10mm square rods @ 100mm c/c fixing in
position ,complete for finsihed item of work
 VENTIALTORS size 1.20M x 1 8 8 750.00 1 6000

Plain Cement Concrete corresponding to M15 grade as per IS 456

equivalent to (1:2:4) proportion nominal mix (cement: fine aggregate:
Coarse aggregate) using 20mm size Hard Blasted Granite (IS383, 1970)
Machine Crushed graded metal from approved quarry including cost and
6
conveyance of all materials like cement, sand, coarse aggregate, water etc.
to site, including seigniorage charges, sales & other taxes on all materials,
all operational, incidental and labour charges such as mixing, laying,
curing concrete, etc., complete for finished item of work (APSS No. 402)

For sill concrete 2 4 3.47 0.23 0.08 0.48

1 5 6.48 0.23 0.08 0.56
1 9 3.47 0.23 0.08 0.54
-1 2 1.22 0.23 0.08 -0.04
1 1 3.47 0.23 0.08 0.06
0.40
Say 2.00 4800 1 9600

Ornamental Plastering 12mm thick in two coats with base coat of 8mm
thick in CM (1:5) and top coat of 4mm thick in CM (1:3) dubara sponge
finish including cost and conveyance of all materials like cement, sand,
water etc., to site, seigniorage charges, sales & other taxes on all
7 materials,all operational, incidental and labour charges such as mixing
mortar, scaffolding charges, lift charges, including cutting of Grooves
wherever necessary as directed by Engineer - in - charge, finishing,
curing, etc., complete for Even Surfaces of Wall for finished item of
work. (APSS 901,903 & 904)
For class rooms 1 2 7.31 6.7 97.95
beams 2 2 6.7 0.45 12.06
Verandah ceiling 1 1 18.08 1.80 32.54
2 4 1.80 0.30 4.32
Sides 4 2 6.70 0.45 24.12
ver. sunshade 1 1 18.54 0.85 15.76
c/shades 2 1 2.80 0.85 4.76
windows 1 5 1.80 0.60 5.40
flights 2 1 3.60 1.50 10.80
landing 1 1 3.00 1.50 4.50
37.79
Say 250.00 424.48 1 106120
Plastering 12mm thick in two coats with base coat of 8mm thick in CM
(1:6) and top coat of 4mm thick in CM (1:4) dubara sponge finish
including cost and conveyance of all materials like cement, sand, water
etc., to site, seigniorage charges, sales & other taxes on all materials,all
8 operational, incidental and labour charges such as mixing mortar,
scaffolding charges, lift charges, including cutting of Grooves wherever
necessary as directed by Engineer - in - charge, finishing, curing, etc.,
complete for Even Surfaces of Wall for finished item of work. (APSS
901,903 & 904)
rooms inside 1 2 28.02 3.23 181.01
staircase 1 2 6.93 3.35 46.43
1 1 3.00 3.35 10.05
 hand rail 2 1 3.65 2.00 14.6
ver. Outre wall 1 1 18.08 1.13 20.43
1 2 1.52 1.13 3.44
parapet wall 1 1 25.62 1.05 26.9
1 1 1.52 1.05 1.6
parapet wall t open 1 1 8.45 1.05 8.87
1 1 7.31 1.05 7.7
-3 2 1.50 1.35 -12.15
-1 2 1.22 2.13 -5.2
For columns 1 6 1.20 2.15 15.48
30.86
Say 350.00 404.75 1 141663
sqm
Plastering 20mm thick in two coats with base coat of 16mm thick in CM
(1:6) and top coat of 4mm thick in CM (1:4) dubara sponge finish
including cost and conveyance of all materials like cement, sand, water
etc., to site, seigniorage charges, sales & other taxes on all materials, all
9 operational, incidental and labour charges such as mixing
mortar,scaffolding charges, lift charges, finishing,including cutting of
Grooves wherever necessary as directed by Engineer - in - charge, curing,
etc., complete for Uneven Surfaces of Brick Wall for finished item of
work. (APSS 901,903 & 904)
For outer side 1 1 18.54 3.35 62.11
1 2 7.38 3.60 53.14
1 1 18.54 3.23 59.88
1 2 2.00 1.50 6.00
1 1 18.54 1.25 23.18
1 2 1.80 1.25 4.50
parapet 1 1 26.08 0.90 23.47
1 1 9.13 0.90 8.22
1 1 7.54 0.90 6.79
1 1 1.75 0.90 1.58
51.15
Say 300.00 416.85 1 125057
Making Green Chalk Board of size 3.00Mx1.20Mts including border with
plastering in CM (1:2) 12mm thick as base coat and 3mm thick top coat
with cement green oxide powder in (1:1) prop. and making border of
50x20mm thick alround the chalk board over existing plastered surface
10 and painting the chalk board surface with chalk board paint as per
direction of Engineer-in-Charge including cost and conveyance of all
materials, sales and other taxes on cost of materials and all operational,
incidental and labour charges etc., complete for finished item of work
(APSS No.1603)
1 2 2 10200.00 1 20400
 Providing & Applying Synthetic Plaster Putty or Plaster of Paris Putty or
Lime punning of average 1 to 2mm thick over plastered surface to prepare
the surface even and smooth after thoroughly brushing the surface to
remove all dirt and remains of loose powdered materials, applying emery
paper, sand the surface, clean & wipe off loose dust, applying knifing
11
paste filler by putty knife/muslin pad, air dry for 2-3 hours, sand with 180
and 320 No, emery paper for the surface preparation including cost and
conveyance of all materials to site, sales & other taxes, all operational,
incidental and labour charges etc., complete for finished item of work for
internal walls.
For class rooms 1 2 7.31 6.7 97.95
beams 2 2 6.7 0.45 12.06
Verandah ceiling 1 1 18.08 1.80 32.54
2 4 1.80 0.30 4.32
Sides 4 2 6.70 0.45 24.12
ver. sunshade 1 1 18.54 0.85 15.76
c/shades 2 1 2.80 0.85 4.76
windows 1 5 1.80 0.60 5.40
flights 2 1 3.60 1.50 10.80
landing 1 1 3.00 1.50 4.50
rooms inside 1 2 28.02 3.23 181.01
staircase 1 2 6.93 3.35 46.43
1 1 3.00 3.35 10.05
hand rail 2 1 3.65 2.00 14.6
ver. Outre wall 1 1 18.08 1.13 20.43
1 2 1.52 1.13 3.44
parapet wall 1 1 25.62 1.05 26.9
1 1 1.52 1.05 1.6
parapet wall t open 1 1 8.45 1.05 8.87
1 1 7.31 1.05 7.7
-3 2 1.50 1.35 -12.15
-1 2 1.22 2.13 -5.2
For columns 1 6 1.20 2.15 15.48
For outer side 1 1 18.54 3.35 62.11
1 2 7.38 3.60 53.14
1 1 18.54 3.23 59.88
1 2 2.00 1.50 6.00
1 1 18.54 1.25 23.18
1 2 1.80 1.25 4.50
parapet 1 1 26.08 0.90 23.47
1 1 9.13 0.90 8.22
1 1 7.54 0.90 6.79
1 1 1.75 0.90 1.58
19.80
800.00 183.50 1 sqm 146801
 Painting to New wood work with two coats of ready mixed synthetic
enamel paint first quality all shades to give an even shade over base coat
Primer with Luppam finishing after thoroughly brushing the surface to
12 remove all remains including cost and conveyance of all materials to site,
sales & other taxes, all operational, incidental and labour charges etc.,
complete for finished item of work.(3 coats) (APSS No. 1201 & 1212).in
All Floors

2 2.25 1.22 2.13 11.69

6 2.75 1.5 1.20 29.70
8.61
say 50.00 169.70 1 8486

Painting to New Iron work with two coats of ready mixed synthetic
enamel paint first quality all shades over an existing steel primer including
13 cost and conveyance of all materials to site, sales & other taxes, incidental,
operational and all labour charges etc., complete for finished item of work.
(APSS No. 1201, 1207 & 1212).in All Floors

1 8 1.20 0.30 2.88

Say 2.88 95.50 1 275

Painting to New walls with two coats of acrylic interior emulsion paint
having VOC (Volatile Organic Compound) content less than 50 grams/
liter.of superior quality of approved brand and shade over base coat of
cement primer grade -I making three coats in all to give an even shade
after thoroughly brushing the surface to remove all loose powdered
14
materials, including cost and conveyance of all materials, including cost
and conveyance of all materials, cost of brushes, water to site, etc., sales &
other taxes, all operational, incidental and labour charges such as
scaffolding charges, lift charges, curing etc., complete for finished item of
work in all floors for Walls.(APSS No. 911) in All Floors INTERNAL

For class rooms 1 2 7.31 6.7 97.95

beams 2 2 6.7 0.45 12.06
Verandah ceiling 1 1 18.08 1.80 32.54
2 4 1.80 0.30 4.32
Sides 4 2 6.70 0.45 24.12
ver. sunshade 1 1 18.54 0.85 15.76
c/shades 2 1 2.80 0.85 4.76
windows 1 5 1.80 0.60 5.40
flights 2 1 3.60 1.50 10.80
landing 1 1 3.00 1.50 4.50
rooms inside 1 2 28.02 3.23 181.01
staircase 1 2 6.93 3.35 46.43
1 1 3.00 3.35 10.05
hand rail 2 1 3.65 2.00 14.6
ver. Outre wall 1 1 18.08 1.13 20.43
1 2 1.52 1.13 3.44
parapet wall 1 1 25.62 1.05 26.9
1 1 1.52 1.05 1.6
parapet wall t open 1 1 8.45 1.05 8.87
1 1 7.31 1.05 7.7
 -3 2 1.50 1.35 -12.15
-1 2 1.22 2.13 -5.2
For columns 1 6 1.20 2.15 15.48
18.65
550.00 147.45 1 81098

Painting to New walls with two coats of Plastic Emulsion paint of superior
quality of approved brand and shade over base coat of cement primer
grade -I making three coats in all to give an even shade after thoroughly
brushing the surface to remove all loose powdered materials, including
15 cost and conveyance of all materials, including cost and conveyance of all
materials, cost of brushes, water to site, etc., sales & other taxes, all
operational, incidental and labour charges such as scaffolding charges, lift
charges, curing etc., complete for finished item of work in all floors for
Walls.(APSS No. 912) in All Floors EXTERNAL

For outer side 1 1 18.54 3.35 62.11

1 2 7.38 3.60 53.14
1 1 18.54 3.23 59.88
1 2 2.00 1.50 6.00
1 1 18.54 1.25 23.18
1 2 1.80 1.25 4.50
parapet 1 1 26.08 0.90 23.47
1 1 9.13 0.90 8.22
1 1 7.54 0.90 6.79
1 1 1.75 0.90 1.58
11.15
Flooring with Soluble salt porcelain vitrified tiles screen printed and 260.00 200.70 1 sqm 52183
polished of size 600 x 600 mm and thickness between 8-10 mm 1st quality
conforming to IS:13711, IS:13712,IS:13630 (Parts 1 to 15) of any colour
and finish in all shades and Designs set over a base coat of CM (1:8),
12mm thick (joints of stone must be flushed) over C.C. bed already laid or
R.C.C. roof slab only after it is properly cured, cleaned, moistered and
where necessary treated with neat grey cement slurry of honey like
16
consistency spred at3.3 kgs of cement for 1 sqm. and jointed with neat
cement paste to full depth, including cost and conveyance of all materials
like cement, sand, water, flooring stones etc. to site, seigniorage charges,
sales and other taxes on all materials, all operational, incidental and labour
charges such as dressing of flooring stones to the required sizes, mixing of
cement mortar, laying, jointing, curing, lift charges etc., complete for
finished
For classitem of work.(APSS No.703
rooms 1 &2701)7.31 6.7 97.95
Verandah 1 1 18.31 2 36.62
1 1 3.30 3.60 11.88
3.55
Say 150 1112.50 1 166875
 Providing skirting to internal walls to 10 cm height with vitrified tiles
8mm thick , regular finish and normal colour, length equal to flooring
tiles, set over base coat of CM(1:5) 12 mm thick using screened sand with
cement slurry of honey like consistency spread at the rate of 3.30 kgs per
17
sqm and jointing with white cement paste mixed with pigment of
matching shade to full depth, including cost of all materials like tiles,
cement, sand and water etc.,and overheads & contractors profit complete
for finished item of work.(APSS No.701 &707)

1 2 28 0.10 5.60
Verandah 1 2 18.31 0.10 3.66
1 1 1.8 0.10 0.18
2 1 2.45 0.10 0.49
Providing High Yield Strength Deformed (HYSD) steel bars (Fe 415 grade 5.07
Say
as per IS 1786-1985) of 8mm to 40mm diameters, cutting, bending, to 15.00 1108.10 1 16622
required sizes and shapes placing in position with cover blocks of
approved size and binding wire of 20SWG, forming grills for
reinforcement work as per approved designs and drawings including cost
18 and conveyance of bars from approved sources to site of work, including
cost and conveyance of binding wire, cover blocks, chairs, overlaps,
spacers, dowels, wastage etc., and all operational, incidental, and labour
charges such as cutting, bending, placing in position, tying etc., and sales
& other taxes,on cost of all materials complete for finished item of 7.000
work 50407.45 1 352852
(APSS No.126) in all floors.
Flooring with Red or White Non skid Full Body Ceramic Tiles of MTsize 300
x 300 mm and 7 to 8mm thick 1st. quality over a base coat of CM (1:8),
12mm thick laid over flooring bed / V.R.C.C. slab, with neat grey cement
slurry of honey like consistency spread at the rate of 3.3 Kgs of cement
per Sq.m and jointed with neat white cement paste mixed with pigment of
19
matching shade including cost and conveyance of all materials like
cement, sand, water, ceramic tiles etc. to site, seigniorage charges, sales
and other taxes on all materials, all operational, incidental and labour
charges such as mixing of cement mortar, laying, curing, lift charges etc.,
complete
steps for finished item of work.(APSS
1 12 No.7011.4 & 707)
0.45 7.56
1 11 1.40 0.45 6.93
1 1 3.3 1.5 4.95
Say 19.44 827.60 1 16089
Plain Cement Concrete corresponding to M10 grade as per IS 456
equivalent to (1:3:6) proportion nominal mix (cement: fine aggregate:
Coarse aggregate) using 20mm size Hard Blasted Granite (IS383, 1970)
Machine Crushed graded metal from from approved quarry including cost
21 and conveyance of all materials like cement, sand, coarse aggregate, water
etc. to site, including seigniorage charges, sales & other taxes on all
materials, all operational, incidental and labour charges such as mixing,
laying, curing concrete, etc., complete for finished item of work for Bed
Blocks and Hold Fasts (APSS No. 402)
3 6 0.23 0.15 0.15 0.09
3 15 0.23 0.15 0.15 0.23
0.18
say 0.50 4023.90 1 2012
 Plain Cement Concrete M20 Design Mix ( by weigh batching ) using
20mm size (SS5) hard blasted granite machine crushed graded metal
(Coarse aggregate) from approved quarry, using a minimum quantity of
350 kgs. of cement per 1 cum of concrete including cost and conveyance
28 of all materials like cement, fine aggregate (Sand), coarse aggregate,
water etc., to site and cost of seigniorage charges on all materials
including steel centering, shuttering, machine mixing, laying concrete, lift
charges, curing etc., complete for finished item of work for steps (APSS
No. 402 )

For steps 0.5 22 1.5 0.3 0.15 0.74

0.5 6 3 0.3 0.15 0.41
say 1.15 6198.05 1 7128

Supply and Fixing of iron grill for window with 25mm x 25mm x 3mm
22 thick of size 1.5x1.35 M equal L angles and 10mm square rods @ 150mm
c/c fixing in position ,complete for finsihed item of work

1 1 1.00
Providing impervious coat over RCC roof slab to required slopes with 1.00
1 1 CM
(1:3) prop. 20mm thick (average) mixed with Two component say sysem High
2.00 3000.00 1 6000
durable cementitious acrylic based waterproofing systems : Complies with
ASTM Dcompound manufactured by reputed manufacturers as approved
by Engineer-in-charge at 1Kg/bag of cement, laid over roof slab when it is
green, finished smooth with a floating coat of neat cement and thread
23 lining at regular intervals of 45cmx45cm including cost and conveyance of
all materials like cement, sand, water proofing compound, water etc., to
site, seigniorage charges, sales & other taxes on all materials, all
operational, incidental and labour charges such as mixing mortar, laying,
rounding off at junctions of wall and slab, rendering smooth with thread
For class
lining, roomslift charges, etc., complete
curing, 1 1 for
19.14 9.75item of work (APSS
finished 186.62
No. 901 & 903). 13.38
say 200.00 427.80 1 85558

FIRST FLOOR TOTAL: 2160157.82

Assistant Engineer, Dy.Executive Engineer, Executive Engineer,

APEWIDC, Srikakulam APEWIDC, Srikakulam APEWIDC, Srikakulam
 DETAILED CUM ABSTRACT ESTIMATE
Name of the work : Improving Infrastructure Facilities to Govt.Polytechnic at Srikakulam (V&M) in
Srikakulam District
Under Nadu - Nedu
SECOND FLOOR
SNo Description of work No L B D Qty Rate Per Amount

Vibrated Reinforced Cement Concrete M 20 Design Mix ( by Batching Plant )

using 20mm size (SS5) hard granite machine crushed graded metal (Coarse
aggregate) from approved quarry, using a minimum quantity of 350 kgs. of
cement per 1 cum of concreteincluding cost and conveyance of all materials
like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and
1 cost of seigniorage charges on all materials including centering using
Cashewrina Ballies and Wooden runners & staging including all bracings, cross
members etc., shuttering , machine mixing, laying concrete, vibrating,lift
charges, curing etc., complete but excluding cost of steel and it’s fabrication
charges for finished item of work (APSS No. 402 & 403) For coloumns , Lintels,
Water tanks, Rcc walls in building

a Columns up to Top of Floor Beam

1 2 0.23 0.45 2.70 0.56
1 2 0.23 0.45 2.40 0.5

Say 1.06 10812.55 1 11461

b Roof beams in GF
1 2 7.35 0.23 0.23 0.78
Sides 1 2 3.3 0.23 0.23 0.35
Say 1.13 8870.95 1 10024
c Roof slab 100mm thick
1 1 8.15 3.80 30.97

Say 30.97 934.60 1 28945

d LINTELS: (RCC)
Rearside 1 1 2.82 0.23 0.15 0.1

Say 0.1 10266.60 1 1027

e Sun Shades of 0.6 mtrs of avearage thick of 0.0625 mtrs

Right&Left 1 1 2.65 0.60 1.59
Say 1.59 767.75 1 1220.7225

Brick Masonry in superstructure with CM (1:8) prop: using second class bricks
from approved source having minimum crushing strength of 40 Kg/Sqcm.
2
including cost and conveyance of all materials like cement, sand, bricks, water
etc., to site, including sa

pr pet 2 4 3.47 0.23 0.90 5.75

1 1 3.00 0.23 0.90 0.62
1 2 9.00 0.23 0.90 3.73
hed room 1 2 4.50 0.23 3.00 6.21
1 2 2.90 0.23 3.00 4.00
Window -1 1 1.50 0.23 1.35 -0.47
Door -1 1 1.22 0.23 2.13 -0.60
 0.76
Say 20.00 6102.75 1 122055

Ornamental Plastering 12mm thick in two coats with base coat of 8mm thick in
CM (1:5) and top coat of 4mm thick in CM (1:3) dubara sponge finish including
cost and conveyance of all materials like cement, sand, water etc., to site,
seigniorage charges, sales & other taxes on all materials,all operational,
3
incidental and labour charges such as mixing mortar, scaffolding charges, lift
charges, including cutting of Grooves wherever necessary as directed by
Engineer - in - charge, finishing, curing, etc., complete for Even Surfaces of
Wall for finished item of work. (APSS 901,903 & 904)

1 1 6.68 3.30 22.04

1 1 3.60 0.75 2.70
Say 24.74 465.67 1 11521

Plastering 12mm thick in two coats with base coat of 8mm thick in CM (1:6) and
top coat of 4mm thick in CM (1:4) dubara sponge finish including cost and
conveyance of all materials like cement, sand, water etc., to site, seigniorage
charges, sales & other taxes on all materials,all operational, incidental and
4
labour charges such as mixing mortar, scaffolding charges, lift charges, including
cutting of Grooves wherever necessary as directed by Engineer - in - charge,
finishing, curing, etc., complete for Even Surfaces of Wall for finished item of
work. (APSS 901,903 & 904)
crass walls 1 2 3.00 3.00 18.00
back side 1 2 4.50 3.00 27.00
1 2 6.50 3.30 42.90
deduct doors -1 1 1.22 2.13 -2.60
windows -1 1 1.50 1.35 -2.03
0.00
0.00
parapet wall in side 1 1 18.08 0.90 16.27
front side 1 1 18.08 0.90 16.27

crass walls 1 2 9.30 0.90 16.74

parapet wall 1 1 18.54 0.90 16.69
top 1 1 18.54 0.23 4.26
for back side 1 2 18.54 0.90 33.37
for back side 1 2 18.54 0.23 8.53
crass walls 1 2 9.30 0.90 16.74
crass walls 1 2 9.30 0.23 4.28
head room 1 2 7.10 2.80 39.76
head room 1 1 3.80 2.70 10.26
head room 1 1 3.80 3.00 11.40
for front side 1 1 6.50 0.90 5.85
16.30
Say 300.00 441.90 1 132570
 Providing impervious coat over RCC roof slab to required slopes with CM (1:3)
prop. 20mm thick (average) mixed with water proofing compound
5
manufactured by reputed manufacturers as approved by Engineer-in-charge at
1Kg/bag of cement, laid over roof slab w
1 1 7.5 3.8 28.50
say
Providing High Yield Strength Deformed (HYSD) steel bars (Fe 415 grade as 28.50
per 460.20 1 13116
IS 1786-1985) of 8mm to 40mm diameters, cutting, bending, to required sizes
and shapes placing in position with cover blocks of approved size and binding
wire of 20SWG, forming grills for reinforcement work as per approved designs
and drawings including cost and conveyance of bars from approved sources to
6
site of work, including cost and conveyance of binding wire, cover blocks, chairs,
overlaps, spacers, dowels, wastage etc., and all operational, incidental, and
labour charges such as cutting, bending, placing in position, tying etc., and sales
& other taxes,on cost of all materials complete for finished item of work (APSS
No.126) in all floors.
0.500
0.500 51466.45 1 25733
MT
GROUND FLOOR TOTAL: 357672

Assistant Engineer, Dy.Executive Engineer, Executive Engineer,

APEWIDC, Srikakulam APEWIDC, Srikakulam APEWIDC, Srikakulam
 Name of the work : Improving Infrastructure Facilities to Govt.Polytechnic at Srikakulam (V&M) in
Srikakulam District
Under Nadu - Nedu

ELECTRIFICATION
Rate (Rs.)
S. NO. Quantity Description of Work Unit Amount (Rs.)
in fig.
CONDUIT PIPE

Supply and Fixing of 25mm dia 2mm thick PVC

pipe (ISI MARK) concealed in Roof Slabs with all
1 required accessories including masonary work
and labour charges etc., complete. Make :
Sudhakar/ Maco Plast / Modi
ONE
350 rmt 75.89 26563
RM
Supply and Fixing of 25mm dia 1.5mm thick
P.V.C. pipe (ISI MARK) concealed in wall with all
required accessories including masonary work ONE
2 100 RM 83.39 8339
for light, fan and separate plug point with well RM
seasoned TW box including all labour charges
etc., complete. Make :
WIRING
Wiring with 2 runs of 14/0.3mm (1.0 Sq.mm) Fire
Retardant (FR) P.V.C. insulated flexible copper
cable (ISI MARK) in existing pipe with 6A switch,
3 57 PTS POINT 685.10 39051
Ceiling rose and 3mm thick hylam sheet covering
to switch control box including all labour charges
Supply and fixing of 6A 3 pin wall plug socket
etc., comp
with 6A switch control on a common switch
board with earth continuity including wire leads,
4 10 PTS earth connections along with all labour charges POINT 344.95 3450
Supply and Fixing of 16A 3pin and 6A 3pin plug
etc., complete.
socket
Makes :with Anchorand/ Gold
16A switch
Medal control duly
Olive /Million
recessed
Zoom in wall with MS switch deep box of 6"
5 4 NOS x8" x2 1/2" size covered with hylam sheet EACH 911.19 3645
Supply
includingandearth
fixing connections
Distribution and
boardallwith 20A
labour
single phase plug
charges etc., complete. and Socket, in sheet steel
enclosure
Makes : G with 10/16/20A SP MCB including
6 2 NOS internal connection and labour charges for flush EACH 1189.50 2379
mounting etc., complete
Makes : MDS / GE/ L&T Hager /
RUN OF MAINS
Seimens/Schneider.
Supply and run of 1 of 14 /0.3mm (1.0 Sq.mm)
FR P.V.C. insulated flexible copper cable in ONE
7 100 RM existing pipe for earth continuity including all RM 24.77 2477
labour charges
Supply and runetc.,
of 2complete.
of 2.5 Sq mm PVC insulated
Makes
flexible: copper
Finolexcable
/ L&T.and 1 run of 1.00 Sq mm
flexible PVC insulated flexible copper cable in the ONE
8 200 RM 107.93 21587
existing conduit pipe for run of mains from main RM
Supply and run
panel board of3 of
to TPN DB'S6 Sq
withmm
pinPVC
typeinsulated
lugs and
flexible
connectio copper cable and 1 run of 2.50 Sq mm
flexible PVC insulated flexible copper cable in the ONE
9 70 RM 221.66 15516
existing conduit pipe for run of mains from main RM
panel board to TPN DB'S with pin type lugs and
connections
 Supply and fixing of 18W/20W, 1200mm length
LED batten light with extruded alluminium
LIGHT
housingFITTINGS
and polycarbonate cover, input voltage
AC 220 - 260 Volts with PF>0.9, Surge
protection: 2KV,THD<15%, with inbuilt driver and
frosted cover CCT: 3000K - 5700K, minimum
10 25 NOS EACH 1051.62 26291
CRI>70, .etc., complete.
Makes: Wipro / Phillips /Lighting
Technologies(LT) / GE-Venture / Crompton /
Bajaj / VIN /Halonix/Jaquar/HPL/Havells/GM
Supply and fixing
b) LED MAKE of LUMILEDS
: PHILIPS batten holder
/ CREE/ /slanting
NICHIA
holder in lieu
/ OSRAM / SAMSUNG. of ceiling rose of light point
11 10 NOS complete with all connections and all labour EACH 187 1870
charges with 40W bulb (for new installation).
Makes : Gold Medal /Million / Vimal

Supply of MS readymade fan hooks complete for

12 25 NOS EACH 85.21 2130
finished item of work.
Supply of 1200 mm (48") sweep 230V, A.C 50
Hz.Ceiling fan with 3 Blades and double ball
13 25 NOS bearings with all standard accessories. EACH 2665.41 66635
Makes: Crompton Decora / Bajaj Ultima /Havells
Velocity
Supply and/ Usha AstraElectronic
erecting / Orient PSPO.
type regulator for
ceiling fans 1200 mm sweep complete erected EACH
14 25 NOS 230.64 5766
on existing board.Make : Anchor / Gold Medal
Olive / Million Zoom
Labour charges for Fixing of Ceiling fan and
15 25 NOS regulator including transportation and giving EACH 156.79 3920
connections with twin core
Supply, Transportation wire etc.,
and fixing of 1complete.
x 36/40 W
fluorescent street light luminaire with sheet
alluminium housing and UV stabilised acrylic
16 2 NOS EACH 2037.12 4074
cover with Electronic ballast with all standard
accessories including 1.0 Mtr 25mm dia 'B' Class
GI pipeofbracket,
Fixing 40W street light luminaire to the wall
17 2 NOS with 1.0 Mtr., 25mm dia GI pipe bracket and anti EACH 7314.08 14628
tilting MS flat etc., including giving connections
and labour charges etc., complete.
Supply and fixing
DISTRIBUTION TPN Distribution board with IP-
BOARDS
43 protection (Metal Door) suitable for 3 phase
ELCB / RCCB / FP Isolator as incomer and 10kA SP
18 1 NOS MCBs as outing going including internal EACH 4734.91 4735
connection and labour charges for flush
mounting
Supply of etc.,
thecomplete.
following PVC XLPE armoured
Mak
cable 1100 V. Grade with ISI mark stranded / ONE
19 50 RM 238.59 11930
solid, aluminimum conductor complete RM
Make: Universal / NICCO/ TORRENT/CCI.
EARTHING
Providing independent earthling by excavating a
trench to a depth of 2.1 M in all soils, as per size
specified in the Data, using 40mm dia 'B' class GI EACH
20 1 NOS 4586.64 4587
pipe of 2.5 Mtrs length with necessary
accessories with hume pipe ring duly providing
Supply
staggeredandholes
Fixing of 3 phase meter Box, 3 Nos
100 A fuse units, Neutral link, on T.W block with EACH
21 1 NO 5000 5000
all accessaries etc., complete for finished items
of work.
274571.64
TOTAL:

Assistant Engineer, Dy.Executive Engineer, Executive Engineer

APEWIDC, Srikakulam APEWIDC, Srikakulam APEWIDC, Srikakulam
 CONVEYANCE CHARGES AS PER COMMON SSR 2019 - 2020

PCC
Rubble/Size Cement/Steel/RC
Earth/Sand/G Slabs/Shabad
Sl. Lead in Stone/Cut C poles/A.C & G.I
ravel/Murrum/ Slabs/CC & Water Bricks
No Kms Stone/Coarse Sheets/Packed
Lime/Surki Laterite
aggregates materials
Blocks/Wood

1 1 2 3 4 5 6 7
### 1 1.00 0.00 0.00 0.00 0.00 0.00 0.00
2 2.00 11.20 11.00 6.90 16.10 7.00 18.30
3 3.00 24.40 25.30 15.90 37.10 15.20 39.70
4 4.00 35.70 36.60 22.90 53.80 22.20 57.90
5 5.00 47.00 47.90 30.00 70.40 29.30 76.20
6 6.00 58.30 59.20 37.10 87.00 36.30 94.50
7 7.00 69.60 70.50 44.20 103.60 43.30 112.80
8 8.00 80.90 81.80 51.30 120.20 50.30 131.10
9 9.00 92.20 93.10 58.40 136.80 57.30 149.40
10 10.00 103.50 104.40 65.50 153.40 64.30 167.70
11 11.00 114.80 115.70 72.60 170.00 71.30 186.00
12 12.00 126.10 127.00 79.70 186.60 78.30 204.30
13 13.00 137.40 138.30 86.80 203.20 85.30 222.60
14 14.00 148.70 149.60 93.90 219.80 92.30 240.90
15 15.00 160.00 160.90 101.00 236.40 99.30 259.20
16 16.00 171.30 172.20 108.10 253.00 106.30 277.50
17 17.00 182.60 183.50 115.20 269.60 113.30 295.80
18 18.00 193.90 194.80 122.30 286.20 120.30 314.10
19 19.00 205.20 206.10 129.40 302.80 127.30 332.40
20 20.00 216.50 217.40 136.50 319.40 134.30 350.70
21 21.00 227.80 228.70 143.60 336.00 141.30 369.00
22 22.00 239.10 240.00 150.70 352.60 148.30 387.30
23 23.00 250.40 251.30 157.80 369.20 155.30 405.60
24 24.00 261.70 262.60 164.90 385.80 162.30 423.90
25 25.00 273.00 273.90 172.00 402.40 169.30 442.20
26 26.00 284.30 285.20 179.10 419.00 176.30 460.50
27 27.00 295.60 296.50 186.20 435.60 183.30 478.80
28 28.00 306.90 307.80 193.30 452.20 190.30 497.10
29 29.00 318.20 319.10 200.40 468.80 197.30 515.40
30 30.00 329.50 330.40 207.50 485.40 204.30 533.70
31 31.00 338.90 339.80 213.40 499.30 210.20 548.90
32 32.00 348.30 349.20 219.30 513.20 216.10 564.10
33 33.00 357.70 358.60 225.20 527.10 222.00 579.30
34 34.00 367.10 368.00 231.10 541.00 227.90 594.50
35 35.00 376.50 377.40 237.00 554.90 233.80 609.70
36 36.00 385.90 386.80 242.90 568.80 239.70 624.90
37 37.00 395.30 396.20 248.80 582.70 245.60 640.10
38 38.00 404.70 405.60 254.70 596.60 251.50 655.30
39 39.00 414.10 415.00 260.60 610.50 257.40 670.50
40 40.00 423.50 424.40 266.50 624.40 263.30 685.70
41 41.00 432.90 433.80 272.40 638.30 269.20 700.90
42 42.00 442.30 443.20 278.30 652.20 275.10 716.10
43 43.00 451.70 452.60 284.20 666.10 281.00 731.30
44 44.00 461.10 462.00 290.10 680.00 286.90 746.50
45 45.00 470.50 471.40 296.00 693.90 292.80 761.70
46 46.00 479.90 480.80 301.90 707.80 298.70 776.90
47 47.00 489.30 490.20 307.80 721.70 304.60 792.10
48 48.00 498.70 499.60 313.70 735.60 310.50 807.30
49 49.00 508.10 509.00 319.60 749.50 316.40 822.50
50 50.00 517.50 518.40 325.50 763.40 322.30 837.70
51 51.00 526.90 527.80 331.40 777.30 328.20 852.90
52 52.00 536.30 537.20 337.30 791.20 334.10 868.10
 PCC
Rubble/Size Cement/Steel/RC
Earth/Sand/G Slabs/Shabad
Sl. Lead in Stone/Cut C poles/A.C & G.I
ravel/Murrum/ Slabs/CC & Water Bricks
No Kms Stone/Coarse Sheets/Packed
Lime/Surki Laterite
aggregates materials
Blocks/Wood

1 1 2 3 4 5 6 7
53 53.00 545.70 546.60 343.20 805.10 340.00 883.30
54 54.00 555.10 556.00 349.10 819.00 345.90 898.50
55 55.00 564.50 565.40 355.00 832.90 351.80 913.70
56 56.00 573.90 574.80 360.90 846.80 357.70 928.90
57 57.00 583.30 584.20 366.80 860.70 363.60 944.10
58 58.00 592.70 593.60 372.70 874.60 369.50 959.30
59 59.00 602.10 603.00 378.60 888.50 375.40 974.50
60 60.00 611.50 612.40 384.50 902.40 381.30 989.70
61 61.00 620.90 621.80 390.40 916.30 387.20 1004.90
62 62.00 630.30 631.20 396.30 930.20 393.10 1020.10
63 63.00 639.70 640.60 402.20 944.10 399.00 1035.30
64 64.00 649.10 650.00 408.10 958.00 404.90 1050.50
65 65.00 658.50 659.40 414.00 971.90 410.80 1065.70
66 66.00 667.90 668.80 419.90 985.80 416.70 1080.90
67 67.00 677.30 678.20 425.80 999.70 422.60 1096.10
68 68.00 686.70 687.60 431.70 1013.60 428.50 1111.30
69 69.00 696.10 697.00 437.60 1027.50 434.40 1126.50
70 70.00 705.50 706.40 443.50 1041.40 440.30 1141.70
71 71.00 714.90 715.80 449.40 1055.30 446.20 1156.90
72 72.00 724.30 725.20 455.30 1069.20 452.10 1172.10
73 73.00 733.70 734.60 461.20 1083.10 458.00 1187.30
74 74.00 743.10 744.00 467.10 1097.00 463.90 1202.50
75 75.00 752.50 753.40 473.00 1110.90 469.80 1217.70
76 76.00 761.90 762.80 478.90 1124.80 475.70 1232.90
77 77.00 771.30 772.20 484.80 1138.70 481.60 1248.10
78 78.00 780.70 781.60 490.70 1152.60 487.50 1263.30
79 79.00 790.10 791.00 496.60 1166.50 493.40 1278.50
80 80.00 799.50 800.40 502.50 1180.40 499.30 1293.70
81 81.00 808.90 809.80 508.40 1194.30 505.20 1308.90
82 82.00 818.30 819.20 514.30 1208.20 511.10 1324.10
83 83.00 827.70 828.60 520.20 1222.10 517.00 1339.30
84 84.00 837.10 838.00 526.10 1236.00 522.90 1354.50
85 85.00 846.50 847.40 532.00 1249.90 528.80 1369.70
86 86.00 855.90 856.80 537.90 1263.80 534.70 1384.90
87 87.00 865.30 866.20 543.80 1277.70 540.60 1400.10
88 88.00 874.70 875.60 549.70 1291.60 546.50 1415.30
89 89.00 884.10 885.00 555.60 1305.50 552.40 1430.50
90 90.00 893.50 894.40 561.50 1319.40 558.30 1445.70
91 91.00 902.90 903.80 567.40 1333.30 564.20 1460.90
92 92.00 912.30 913.20 573.30 1347.20 570.10 1476.10
93 93.00 921.70 922.60 579.20 1361.10 576.00 1491.30
94 94.00 931.10 932.00 585.10 1375.00 581.90 1506.50
95 95.00 940.50 941.40 591.00 1388.90 587.80 1521.70
96 96.00 949.90 950.80 596.90 1402.80 593.70 1536.90
97 97.00 959.30 960.20 602.80 1416.70 599.60 1552.10
98 98.00 968.70 969.60 608.70 1430.60 605.50 1567.30
99 99.00 978.10 979.00 614.60 1444.50 611.40 1582.50
100 100.00 987.50 988.40 620.50 1458.40 617.30 1597.70
101 101.00 996.90 997.80 626.40 1472.30 623.20 1612.90
102 102.00 1006.30 1007.20 632.30 1486.20 629.10 1628.10
103 103.00 1015.70 1016.60 638.20 1500.10 635.00 1643.30
104 104.00 1025.10 1026.00 644.10 1514.00 640.90 1658.50
105 105.00 1034.50 1035.40 650.00 1527.90 646.80 1673.70
 PCC
Rubble/Size Cement/Steel/RC
Earth/Sand/G Slabs/Shabad
Sl. Lead in Stone/Cut C poles/A.C & G.I
ravel/Murrum/ Slabs/CC & Water Bricks
No Kms Stone/Coarse Sheets/Packed
Lime/Surki Laterite
aggregates materials
Blocks/Wood

1 1 2 3 4 5 6 7
106 106.00 1043.90 1044.80 655.90 1541.80 652.70 1688.90
107 107.00 1053.30 1054.20 661.80 1555.70 658.60 1704.10
108 108.00 1062.70 1063.60 667.70 1569.60 664.50 1719.30
109 109.00 1072.10 1073.00 673.60 1583.50 670.40 1734.50
110 110.00 1081.50 1082.40 679.50 1597.40 676.30 1749.70
111 111.00 1090.90 1091.80 685.40 1611.30 682.20 1764.90
112 112.00 1100.30 1101.20 691.30 1625.20 688.10 1780.10
113 113.00 1109.70 1110.60 697.20 1639.10 694.00 1795.30
114 114.00 1119.10 1120.00 703.10 1653.00 699.90 1810.50
115 115.00 1128.50 1129.40 709.00 1666.90 705.80 1825.70
116 116.00 1137.90 1138.80 714.90 1680.80 711.70 1840.90
117 117.00 1147.30 1148.20 720.80 1694.70 717.60 1856.10
118 118.00 1156.70 1157.60 726.70 1708.60 723.50 1871.30
119 119.00 1166.10 1167.00 732.60 1722.50 729.40 1886.50
120 120.00 1175.50 1176.40 738.50 1736.40 735.30 1901.70
121 121.00 1184.90 1185.80 744.40 1750.30 741.20 1916.90
122 122.00 1194.30 1195.20 750.30 1764.20 747.10 1932.10
123 123.00 1203.70 1204.60 756.20 1778.10 753.00 1947.30
124 124.00 1213.10 1214.00 762.10 1792.00 758.90 1962.50
125 125.00 1222.50 1223.40 768.00 1805.90 764.80 1977.70
126 126.00 1231.90 1232.80 773.90 1819.80 770.70 1992.90
127 127.00 1241.30 1242.20 779.80 1833.70 776.60 2008.10
128 128.00 1250.70 1251.60 785.70 1847.60 782.50 2023.30
129 129.00 1260.10 1261.00 791.60 1861.50 788.40 2038.50
130 130.00 1269.50 1270.40 797.50 1875.40 794.30 2053.70
131 131.00 1278.90 1279.80 803.40 1889.30 800.20 2068.90
132 132.00 1288.30 1289.20 809.30 1903.20 806.10 2084.10
133 133.00 1297.70 1298.60 815.20 1917.10 812.00 2099.30
134 134.00 1307.10 1308.00 821.10 1931.00 817.90 2114.50
135 135.00 1316.50 1317.40 827.00 1944.90 823.80 2129.70
136 136.00 1325.90 1326.80 832.90 1958.80 829.70 2144.90
137 137.00 1335.30 1336.20 838.80 1972.70 835.60 2160.10
138 138.00 1344.70 1345.60 844.70 1986.60 841.50 2175.30
139 139.00 1354.10 1355.00 850.60 2000.50 847.40 2190.50
140 140.00 1363.50 1364.40 856.50 2014.40 853.30 2205.70
141 141.00 1372.90 1373.80 862.40 2028.30 859.20 2220.90
142 142.00 1382.30 1383.20 868.30 2042.20 865.10 2236.10
143 143.00 1391.70 1392.60 874.20 2056.10 871.00 2251.30
144 144.00 1401.10 1402.00 880.10 2070.00 876.90 2266.50
145 145.00 1410.50 1411.40 886.00 2083.90 882.80 2281.70
146 146.00 1419.90 1420.80 891.90 2097.80 888.70 2296.90
147 147.00 1429.30 1430.20 897.80 2111.70 894.60 2312.10
148 148.00 1438.70 1439.60 903.70 2125.60 900.50 2327.30
149 149.00 1448.10 1449.00 909.60 2139.50 906.40 2342.50
150 150.00 1457.50 1458.40 915.50 2153.40 912.30 2357.70
151 151.00 1466.90 1467.80 921.40 2167.30 918.20 2372.90
152 152.00 1476.30 1477.20 927.30 2181.20 924.10 2388.10
153 153.00 1485.70 1486.60 933.20 2195.10 930.00 2403.30
154 154.00 1495.10 1496.00 939.10 2209.00 935.90 2418.50
155 155.00 1504.50 1505.40 945.00 2222.90 941.80 2433.70
156 156.00 1513.90 1514.80 950.90 2236.80 947.70 2448.90
157 157.00 1523.30 1524.20 956.80 2250.70 953.60 2464.10
158 158.00 1532.70 1533.60 962.70 2264.60 959.50 2479.30
 PCC
Rubble/Size Cement/Steel/RC
Earth/Sand/G Slabs/Shabad
Sl. Lead in Stone/Cut C poles/A.C & G.I
ravel/Murrum/ Slabs/CC & Water Bricks
No Kms Stone/Coarse Sheets/Packed
Lime/Surki Laterite
aggregates materials
Blocks/Wood

1 1 2 3 4 5 6 7
159 159.00 1542.10 1543.00 968.60 2278.50 965.40 2494.50
160 160.00 1551.50 1552.40 974.50 2292.40 971.30 2509.70
161 161.00 1560.90 1561.80 980.40 2306.30 977.20 2524.90
162 162.00 1570.30 1571.20 986.30 2320.20 983.10 2540.10
163 163.00 1579.70 1580.60 992.20 2334.10 989.00 2555.30
164 164.00 1589.10 1590.00 998.10 2348.00 994.90 2570.50
165 165.00 1598.50 1599.40 1004.00 2361.90 1000.80 2585.70
166 166.00 1607.90 1608.80 1009.90 2375.80 1006.70 2600.90
167 167.00 1617.30 1618.20 1015.80 2389.70 1012.60 2616.10
168 168.00 1626.70 1627.60 1021.70 2403.60 1018.50 2631.30
169 169.00 1636.10 1637.00 1027.60 2417.50 1024.40 2646.50
170 170.00 1645.50 1646.40 1033.50 2431.40 1030.30 2661.70
171 171.00 1654.90 1655.80 1039.40 2445.30 1036.20 2676.90
172 172.00 1664.30 1665.20 1045.30 2459.20 1042.10 2692.10
173 173.00 1673.70 1674.60 1051.20 2473.10 1048.00 2707.30
174 174.00 1683.10 1684.00 1057.10 2487.00 1053.90 2722.50
175 175.00 1692.50 1693.40 1063.00 2500.90 1059.80 2737.70
176 176.00 1701.90 1702.80 1068.90 2514.80 1065.70 2752.90
177 177.00 1711.30 1712.20 1074.80 2528.70 1071.60 2768.10
178 178.00 1720.70 1721.60 1080.70 2542.60 1077.50 2783.30
179 179.00 1730.10 1731.00 1086.60 2556.50 1083.40 2798.50
180 180.00 1739.50 1740.40 1092.50 2570.40 1089.30 2813.70
181 181.00 1748.90 1749.80 1098.40 2584.30 1095.20 2828.90
182 182.00 1758.30 1759.20 1104.30 2598.20 1101.10 2844.10
183 183.00 1767.70 1768.60 1110.20 2612.10 1107.00 2859.30
184 184.00 1777.10 1778.00 1116.10 2626.00 1112.90 2874.50
185 185.00 1786.50 1787.40 1122.00 2639.90 1118.80 2889.70
186 186.00 1795.90 1796.80 1127.90 2653.80 1124.70 2904.90
187 187.00 1805.30 1806.20 1133.80 2667.70 1130.60 2920.10
188 188.00 1814.70 1815.60 1139.70 2681.60 1136.50 2935.30
189 189.00 1824.10 1825.00 1145.60 2695.50 1142.40 2950.50
190 190.00 1833.50 1834.40 1151.50 2709.40 1148.30 2965.70
191 191.00 1842.90 1843.80 1157.40 2723.30 1154.20 2980.90
192 192.00 1852.30 1853.20 1163.30 2737.20 1160.10 2996.10
193 193.00 1861.70 1862.60 1169.20 2751.10 1166.00 3011.30
194 194.00 1871.10 1872.00 1175.10 2765.00 1171.90 3026.50
195 195.00 1880.50 1881.40 1181.00 2778.90 1177.80 3041.70
196 196.00 1889.90 1890.80 1186.90 2792.80 1183.70 3056.90
197 197.00 1899.30 1900.20 1192.80 2806.70 1189.60 3072.10
198 198.00 1908.70 1909.60 1198.70 2820.60 1195.50 3087.30
199 199.00 1918.10 1919.00 1204.60 2834.50 1201.40 3102.50
200 200.00 1927.50 1928.40 1210.50 2848.40 1207.30 3117.70
201 201.00 1936.90 1937.80 1216.40 2862.30 1213.20 3132.90
202 202.00 1946.30 1947.20 1222.30 2876.20 1219.10 3148.10
203 203.00 1955.70 1956.60 1228.20 2890.10 1225.00 3163.30
204 204.00 1965.10 1966.00 1234.10 2904.00 1230.90 3178.50
205 205.00 1974.50 1975.40 1240.00 2917.90 1236.80 3193.70
206 206.00 1983.90 1984.80 1245.90 2931.80 1242.70 3208.90
207 207.00 1993.30 1994.20 1251.80 2945.70 1248.60 3224.10
208 208.00 2002.70 2003.60 1257.70 2959.60 1254.50 3239.30
209 209.00 2012.10 2013.00 1263.60 2973.50 1260.40 3254.50
210 210.00 2021.50 2022.40 1269.50 2987.40 1266.30 3269.70
211 211.00 2030.90 2031.80 1275.40 3001.30 1272.20 3284.90
 PCC
Rubble/Size Cement/Steel/RC
Earth/Sand/G Slabs/Shabad
Sl. Lead in Stone/Cut C poles/A.C & G.I
ravel/Murrum/ Slabs/CC & Water Bricks
No Kms Stone/Coarse Sheets/Packed
Lime/Surki Laterite
aggregates materials
Blocks/Wood

1 1 2 3 4 5 6 7
212 212.00 2040.30 2041.20 1281.30 3015.20 1278.10 3300.10
213 213.00 2049.70 2050.60 1287.20 3029.10 1284.00 3315.30
214 214.00 2059.10 2060.00 1293.10 3043.00 1289.90 3330.50
215 215.00 2068.50 2069.40 1299.00 3056.90 1295.80 3345.70
216 216.00 2077.90 2078.80 1304.90 3070.80 1301.70 3360.90
217 217.00 2087.30 2088.20 1310.80 3084.70 1307.60 3376.10
218 218.00 2096.70 2097.60 1316.70 3098.60 1313.50 3391.30
219 219.00 2106.10 2107.00 1322.60 3112.50 1319.40 3406.50
220 220.00 2115.50 2116.40 1328.50 3126.40 1325.30 3421.70
221 221.00 2124.90 2125.80 1334.40 3140.30 1331.20 3436.90
222 222.00 2134.30 2135.20 1340.30 3154.20 1337.10 3452.10
223 223.00 2143.70 2144.60 1346.20 3168.10 1343.00 3467.30
224 224.00 2153.10 2154.00 1352.10 3182.00 1348.90 3482.50
225 225.00 2162.50 2163.40 1358.00 3195.90 1354.80 3497.70
226 226.00 2171.90 2172.80 1363.90 3209.80 1360.70 3512.90
227 227.00 2181.30 2182.20 1369.80 3223.70 1366.60 3528.10
228 228.00 2190.70 2191.60 1375.70 3237.60 1372.50 3543.30
229 229.00 2200.10 2201.00 1381.60 3251.50 1378.40 3558.50
230 230.00 2209.50 2210.40 1387.50 3265.40 1384.30 3573.70
231 231.00 2218.90 2219.80 1393.40 3279.30 1390.20 3588.90
232 232.00 2228.30 2229.20 1399.30 3293.20 1396.10 3604.10
233 233.00 2237.70 2238.60 1405.20 3307.10 1402.00 3619.30
234 234.00 2247.10 2248.00 1411.10 3321.00 1407.90 3634.50
235 235.00 2256.50 2257.40 1417.00 3334.90 1413.80 3649.70
236 236.00 2265.90 2266.80 1422.90 3348.80 1419.70 3664.90
237 237.00 2275.30 2276.20 1428.80 3362.70 1425.60 3680.10
238 238.00 2284.70 2285.60 1434.70 3376.60 1431.50 3695.30
239 239.00 2294.10 2295.00 1440.60 3390.50 1437.40 3710.50
240 240.00 2303.50 2304.40 1446.50 3404.40 1443.30 3725.70
241 241.00 2312.90 2313.80 1452.40 3418.30 1449.20 3740.90
242 242.00 2322.30 2323.20 1458.30 3432.20 1455.10 3756.10
243 243.00 2331.70 2332.60 1464.20 3446.10 1461.00 3771.30
244 244.00 2341.10 2342.00 1470.10 3460.00 1466.90 3786.50
245 245.00 2350.50 2351.40 1476.00 3473.90 1472.80 3801.70
246 246.00 2359.90 2360.80 1481.90 3487.80 1478.70 3816.90
247 247.00 2369.30 2370.20 1487.80 3501.70 1484.60 3832.10
248 248.00 2378.70 2379.60 1493.70 3515.60 1490.50 3847.30
249 249.00 2388.10 2389.00 1499.60 3529.50 1496.40 3862.50
250 250.00 2397.50 2398.40 1505.50 3543.40 1502.30 3877.70
251 251.00 2406.90 2407.80 1511.40 3557.30 1508.20 3892.90
252 252.00 2416.30 2417.20 1517.30 3571.20 1514.10 3908.10
253 253.00 2425.70 2426.60 1523.20 3585.10 1520.00 3923.30
254 254.00 2435.10 2436.00 1529.10 3599.00 1525.90 3938.50
255 255.00 2444.50 2445.40 1535.00 3612.90 1531.80 3953.70
256 256.00 2453.90 2454.80 1540.90 3626.80 1537.70 3968.90
257 257.00 2463.30 2464.20 1546.80 3640.70 1543.60 3984.10
258 258.00 2472.70 2473.60 1552.70 3654.60 1549.50 3999.30
259 259.00 2482.10 2483.00 1558.60 3668.50 1555.40 4014.50
260 260.00 2491.50 2492.40 1564.50 3682.40 1561.30 4029.70
261 261.00 2500.90 2501.80 1570.40 3696.30 1567.20 4044.90
262 262.00 2510.30 2511.20 1576.30 3710.20 1573.10 4060.10
263 263.00 2519.70 2520.60 1582.20 3724.10 1579.00 4075.30
264 264.00 2529.10 2530.00 1588.10 3738.00 1584.90 4090.50
 PCC
Rubble/Size Cement/Steel/RC
Earth/Sand/G Slabs/Shabad
Sl. Lead in Stone/Cut C poles/A.C & G.I
ravel/Murrum/ Slabs/CC & Water Bricks
No Kms Stone/Coarse Sheets/Packed
Lime/Surki Laterite
aggregates materials
Blocks/Wood

1 1 2 3 4 5 6 7
265 265.00 2538.50 2539.40 1594.00 3751.90 1590.80 4105.70
266 266.00 2547.90 2548.80 1599.90 3765.80 1596.70 4120.90
267 267.00 2557.30 2558.20 1605.80 3779.70 1602.60 4136.10
268 268.00 2566.70 2567.60 1611.70 3793.60 1608.50 4151.30
269 269.00 2576.10 2577.00 1617.60 3807.50 1614.40 4166.50
270 270.00 2585.50 2586.40 1623.50 3821.40 1620.30 4181.70
271 271.00 2594.90 2595.80 1629.40 3835.30 1626.20 4196.90
272 272.00 2604.30 2605.20 1635.30 3849.20 1632.10 4212.10
273 273.00 2613.70 2614.60 1641.20 3863.10 1638.00 4227.30
274 274.00 2623.10 2624.00 1647.10 3877.00 1643.90 4242.50
275 275.00 2632.50 2633.40 1653.00 3890.90 1649.80 4257.70
276 276.00 2641.90 2642.80 1658.90 3904.80 1655.70 4272.90
277 277.00 2651.30 2652.20 1664.80 3918.70 1661.60 4288.10
278 278.00 2660.70 2661.60 1670.70 3932.60 1667.50 4303.30
279 279.00 2670.10 2671.00 1676.60 3946.50 1673.40 4318.50
280 280.00 2679.50 2680.40 1682.50 3960.40 1679.30 4333.70
281 281.00 2688.90 2689.80 1688.40 3974.30 1685.20 4348.90
282 282.00 2698.30 2699.20 1694.30 3988.20 1691.10 4364.10
283 283.00 2707.70 2708.60 1700.20 4002.10 1697.00 4379.30
284 284.00 2717.10 2718.00 1706.10 4016.00 1702.90 4394.50
285 285.00 2726.50 2727.40 1712.00 4029.90 1708.80 4409.70
286 286.00 2735.90 2736.80 1717.90 4043.80 1714.70 4424.90
287 287.00 2745.30 2746.20 1723.80 4057.70 1720.60 4440.10
288 288.00 2754.70 2755.60 1729.70 4071.60 1726.50 4455.30
289 289.00 2764.10 2765.00 1735.60 4085.50 1732.40 4470.50
290 290.00 2773.50 2774.40 1741.50 4099.40 1738.30 4485.70
291 291.00 2782.90 2783.80 1747.40 4113.30 1744.20 4500.90
292 292.00 2792.30 2793.20 1753.30 4127.20 1750.10 4516.10
293 293.00 2801.70 2802.60 1759.20 4141.10 1756.00 4531.30
294 294.00 2811.10 2812.00 1765.10 4155.00 1761.90 4546.50
295 295.00 2820.50 2821.40 1771.00 4168.90 1767.80 4561.70
296 296.00 2829.90 2830.80 1776.90 4182.80 1773.70 4576.90
297 297.00 2839.30 2840.20 1782.80 4196.70 1779.60 4592.10
298 298.00 2848.70 2849.60 1788.70 4210.60 1785.50 4607.30
299 299.00 2858.10 2859.00 1794.60 4224.50 1791.40 4622.50
300 300.00 2867.50 2868.40 1800.50 4238.40 1797.30 4637.70
301 301.00 2876.90 2877.80 1806.40 4252.30 1803.20 4652.90
302 302.00 2886.30 2887.20 1812.30 4266.20 1809.10 4668.10
303 303.00 2895.70 2896.60 1818.20 4280.10 1815.00 4683.30
304 304.00 2905.10 2906.00 1824.10 4294.00 1820.90 4698.50
305 305.00 2914.50 2915.40 1830.00 4307.90 1826.80 4713.70
306 306.00 2923.90 2924.80 1835.90 4321.80 1832.70 4728.90
307 307.00 2933.30 2934.20 1841.80 4335.70 1838.60 4744.10
308 308.00 2942.70 2943.60 1847.70 4349.60 1844.50 4759.30
309 309.00 2952.10 2953.00 1853.60 4363.50 1850.40 4774.50
310 310.00 2961.50 2962.40 1859.50 4377.40 1856.30 4789.70
311 311.00 2970.90 2971.80 1865.40 4391.30 1862.20 4804.90
312 312.00 2980.30 2981.20 1871.30 4405.20 1868.10 4820.10
313 313.00 2989.70 2990.60 1877.20 4419.10 1874.00 4835.30
314 314.00 2999.10 3000.00 1883.10 4433.00 1879.90 4850.50
315 315.00 3008.50 3009.40 1889.00 4446.90 1885.80 4865.70
316 316.00 3017.90 3018.80 1894.90 4460.80 1891.70 4880.90
317 317.00 3027.30 3028.20 1900.80 4474.70 1897.60 4896.10
 PCC
Rubble/Size Cement/Steel/RC
Earth/Sand/G Slabs/Shabad
Sl. Lead in Stone/Cut C poles/A.C & G.I
ravel/Murrum/ Slabs/CC & Water Bricks
No Kms Stone/Coarse Sheets/Packed
Lime/Surki Laterite
aggregates materials
Blocks/Wood

1 1 2 3 4 5 6 7
318 318.00 3036.70 3037.60 1906.70 4488.60 1903.50 4911.30
319 319.00 3046.10 3047.00 1912.60 4502.50 1909.40 4926.50
320 320.00 3055.50 3056.40 1918.50 4516.40 1915.30 4941.70
321 321.00 3064.90 3065.80 1924.40 4530.30 1921.20 4956.90
322 322.00 3074.30 3075.20 1930.30 4544.20 1927.10 4972.10
323 323.00 3083.70 3084.60 1936.20 4558.10 1933.00 4987.30
324 324.00 3093.10 3094.00 1942.10 4572.00 1938.90 5002.50
325 325.00 3102.50 3103.40 1948.00 4585.90 1944.80 5017.70
326 326.00 3111.90 3112.80 1953.90 4599.80 1950.70 5032.90
327 327.00 3121.30 3122.20 1959.80 4613.70 1956.60 5048.10
328 328.00 3130.70 3131.60 1965.70 4627.60 1962.50 5063.30
329 329.00 3140.10 3141.00 1971.60 4641.50 1968.40 5078.50
330 330.00 3149.50 3150.40 1977.50 4655.40 1974.30 5093.70
331 331.00 3158.90 3159.80 1983.40 4669.30 1980.20 5108.90
332 332.00 3168.30 3169.20 1989.30 4683.20 1986.10 5124.10
333 333.00 3177.70 3178.60 1995.20 4697.10 1992.00 5139.30
334 334.00 3187.10 3188.00 2001.10 4711.00 1997.90 5154.50
335 335.00 3196.50 3197.40 2007.00 4724.90 2003.80 5169.70
336 336.00 3205.90 3206.80 2012.90 4738.80 2009.70 5184.90
337 337.00 3215.30 3216.20 2018.80 4752.70 2015.60 5200.10
338 338.00 3224.70 3225.60 2024.70 4766.60 2021.50 5215.30
339 339.00 3234.10 3235.00 2030.60 4780.50 2027.40 5230.50
340 340.00 3243.50 3244.40 2036.50 4794.40 2033.30 5245.70
341 341.00 3252.90 3253.80 2042.40 4808.30 2039.20 5260.90
342 342.00 3262.30 3263.20 2048.30 4822.20 2045.10 5276.10
343 343.00 3271.70 3272.60 2054.20 4836.10 2051.00 5291.30
344 344.00 3281.10 3282.00 2060.10 4850.00 2056.90 5306.50
345 345.00 3290.50 3291.40 2066.00 4863.90 2062.80 5321.70
346 346.00 3299.90 3300.80 2071.90 4877.80 2068.70 5336.90
347 347.00 3309.30 3310.20 2077.80 4891.70 2074.60 5352.10
348 348.00 3318.70 3319.60 2083.70 4905.60 2080.50 5367.30
349 349.00 3328.10 3329.00 2089.60 4919.50 2086.40 5382.50
350 350.00 3337.50 3338.40 2095.50 4933.40 2092.30 5397.70
351 351.00 3346.90 3347.80 2101.40 4947.30 2098.20 5412.90
352 352.00 3356.30 3357.20 2107.30 4961.20 2104.10 5428.10
353 353.00 3365.70 3366.60 2113.20 4975.10 2110.00 5443.30
354 354.00 3375.10 3376.00 2119.10 4989.00 2115.90 5458.50
355 355.00 3384.50 3385.40 2125.00 5002.90 2121.80 5473.70
356 356.00 3393.90 3394.80 2130.90 5016.80 2127.70 5488.90
357 357.00 3403.30 3404.20 2136.80 5030.70 2133.60 5504.10
358 358.00 3412.70 3413.60 2142.70 5044.60 2139.50 5519.30
359 359.00 3422.10 3423.00 2148.60 5058.50 2145.40 5534.50
360 360.00 3431.50 3432.40 2154.50 5072.40 2151.30 5549.70
361 361.00 3440.90 3441.80 2160.40 5086.30 2157.20 5564.90
362 362.00 3450.30 3451.20 2166.30 5100.20 2163.10 5580.10
363 363.00 3459.70 3460.60 2172.20 5114.10 2169.00 5595.30
364 364.00 3469.10 3470.00 2178.10 5128.00 2174.90 5610.50
365 365.00 3478.50 3479.40 2184.00 5141.90 2180.80 5625.70
366 366.00 3487.90 3488.80 2189.90 5155.80 2186.70 5640.90
367 367.00 3497.30 3498.20 2195.80 5169.70 2192.60 5656.10
368 368.00 3506.70 3507.60 2201.70 5183.60 2198.50 5671.30
369 369.00 3516.10 3517.00 2207.60 5197.50 2204.40 5686.50
370 370.00 3525.50 3526.40 2213.50 5211.40 2210.30 5701.70
 PCC
Rubble/Size Cement/Steel/RC
Earth/Sand/G Slabs/Shabad
Sl. Lead in Stone/Cut C poles/A.C & G.I
ravel/Murrum/ Slabs/CC & Water Bricks
No Kms Stone/Coarse Sheets/Packed
Lime/Surki Laterite
aggregates materials
Blocks/Wood

1 1 2 3 4 5 6 7
371 371.00 3534.90 3535.80 2219.40 5225.30 2216.20 5716.90
372 372.00 3544.30 3545.20 2225.30 5239.20 2222.10 5732.10
373 373.00 3553.70 3554.60 2231.20 5253.10 2228.00 5747.30
374 374.00 3563.10 3564.00 2237.10 5267.00 2233.90 5762.50
375 375.00 3572.50 3573.40 2243.00 5280.90 2239.80 5777.70
376 376.00 3581.90 3582.80 2248.90 5294.80 2245.70 5792.90
377 377.00 3591.30 3592.20 2254.80 5308.70 2251.60 5808.10
378 378.00 3600.70 3601.60 2260.70 5322.60 2257.50 5823.30
379 379.00 3610.10 3611.00 2266.60 5336.50 2263.40 5838.50
380 380.00 3619.50 3620.40 2272.50 5350.40 2269.30 5853.70
381 381.00 3628.90 3629.80 2278.40 5364.30 2275.20 5868.90
382 382.00 3638.30 3639.20 2284.30 5378.20 2281.10 5884.10
383 383.00 3647.70 3648.60 2290.20 5392.10 2287.00 5899.30
384 384.00 3657.10 3658.00 2296.10 5406.00 2292.90 5914.50
385 385.00 3666.50 3667.40 2302.00 5419.90 2298.80 5929.70
386 386.00 3675.90 3676.80 2307.90 5433.80 2304.70 5944.90
387 387.00 3685.30 3686.20 2313.80 5447.70 2310.60 5960.10
388 388.00 3694.70 3695.60 2319.70 5461.60 2316.50 5975.30
389 389.00 3704.10 3705.00 2325.60 5475.50 2322.40 5990.50
390 390.00 3713.50 3714.40 2331.50 5489.40 2328.30 6005.70
391 391.00 3722.90 3723.80 2337.40 5503.30 2334.20 6020.90
392 392.00 3732.30 3733.20 2343.30 5517.20 2340.10 6036.10
393 393.00 3741.70 3742.60 2349.20 5531.10 2346.00 6051.30
394 394.00 3751.10 3752.00 2355.10 5545.00 2351.90 6066.50
395 395.00 3760.50 3761.40 2361.00 5558.90 2357.80 6081.70
396 396.00 3769.90 3770.80 2366.90 5572.80 2363.70 6096.90
397 397.00 3779.30 3780.20 2372.80 5586.70 2369.60 6112.10
398 398.00 3788.70 3789.60 2378.70 5600.60 2375.50 6127.30
399 399.00 3798.10 3799.00 2384.60 5614.50 2381.40 6142.50
400 400.00 3807.50 3808.40 2390.50 5628.40 2387.30 6157.70
401 401.00 3816.90 3817.80 2396.40 5642.30 2393.20 6172.90
402 402.00 3826.30 3827.20 2402.30 5656.20 2399.10 6188.10
403 403.00 3835.70 3836.60 2408.20 5670.10 2405.00 6203.30
404 404.00 3845.10 3846.00 2414.10 5684.00 2410.90 6218.50
405 405.00 3854.50 3855.40 2420.00 5697.90 2416.80 6233.70
406 406.00 3863.90 3864.80 2425.90 5711.80 2422.70 6248.90
407 407.00 3873.30 3874.20 2431.80 5725.70 2428.60 6264.10
408 408.00 3882.70 3883.60 2437.70 5739.60 2434.50 6279.30
409 409.00 3892.10 3893.00 2443.60 5753.50 2440.40 6294.50
410 410.00 3901.50 3902.40 2449.50 5767.40 2446.30 6309.70
411 411.00 3910.90 3911.80 2455.40 5781.30 2452.20 6324.90
412 412.00 3920.30 3921.20 2461.30 5795.20 2458.10 6340.10
413 413.00 3929.70 3930.60 2467.20 5809.10 2464.00 6355.30
414 414.00 3939.10 3940.00 2473.10 5823.00 2469.90 6370.50
415 415.00 3948.50 3949.40 2479.00 5836.90 2475.80 6385.70
416 416.00 3957.90 3958.80 2484.90 5850.80 2481.70 6400.90
417 417.00 3967.30 3968.20 2490.80 5864.70 2487.60 6416.10
418 418.00 3976.70 3977.60 2496.70 5878.60 2493.50 6431.30
419 419.00 3986.10 3987.00 2502.60 5892.50 2499.40 6446.50
420 420.00 3995.50 3996.40 2508.50 5906.40 2505.30 6461.70
421 421.00 4004.90 4005.80 2514.40 5920.30 2511.20 6476.90
422 422.00 4014.30 4015.20 2520.30 5934.20 2517.10 6492.10
423 423.00 4023.70 4024.60 2526.20 5948.10 2523.00 6507.30
 PCC
Rubble/Size Cement/Steel/RC
Earth/Sand/G Slabs/Shabad
Sl. Lead in Stone/Cut C poles/A.C & G.I
ravel/Murrum/ Slabs/CC & Water Bricks
No Kms Stone/Coarse Sheets/Packed
Lime/Surki Laterite
aggregates materials
Blocks/Wood

1 1 2 3 4 5 6 7
424 424.00 4033.10 4034.00 2532.10 5962.00 2528.90 6522.50
425 425.00 4042.50 4043.40 2538.00 5975.90 2534.80 6537.70
426 426.00 4051.90 4052.80 2543.90 5989.80 2540.70 6552.90
427 427.00 4061.30 4062.20 2549.80 6003.70 2546.60 6568.10
428 428.00 4070.70 4071.60 2555.70 6017.60 2552.50 6583.30
429 429.00 4080.10 4081.00 2561.60 6031.50 2558.40 6598.50
430 430.00 4089.50 4090.40 2567.50 6045.40 2564.30 6613.70
431 431.00 4098.90 4099.80 2573.40 6059.30 2570.20 6628.90
432 432.00 4108.30 4109.20 2579.30 6073.20 2576.10 6644.10
433 433.00 4117.70 4118.60 2585.20 6087.10 2582.00 6659.30
434 434.00 4127.10 4128.00 2591.10 6101.00 2587.90 6674.50
435 435.00 4136.50 4137.40 2597.00 6114.90 2593.80 6689.70
436 436.00 4145.90 4146.80 2602.90 6128.80 2599.70 6704.90
437 437.00 4155.30 4156.20 2608.80 6142.70 2605.60 6720.10
438 438.00 4164.70 4165.60 2614.70 6156.60 2611.50 6735.30
439 439.00 4174.10 4175.00 2620.60 6170.50 2617.40 6750.50
440 440.00 4183.50 4184.40 2626.50 6184.40 2623.30 6765.70
441 441.00 4192.90 4193.80 2632.40 6198.30 2629.20 6780.90
442 442.00 4202.30 4203.20 2638.30 6212.20 2635.10 6796.10
443 443.00 4211.70 4212.60 2644.20 6226.10 2641.00 6811.30
444 444.00 4221.10 4222.00 2650.10 6240.00 2646.90 6826.50
445 445.00 4230.50 4231.40 2656.00 6253.90 2652.80 6841.70
446 446.00 4239.90 4240.80 2661.90 6267.80 2658.70 6856.90
447 447.00 4249.30 4250.20 2667.80 6281.70 2664.60 6872.10
448 448.00 4258.70 4259.60 2673.70 6295.60 2670.50 6887.30
449 449.00 4268.10 4269.00 2679.60 6309.50 2676.40 6902.50
450 450.00 4277.50 4278.40 2685.50 6323.40 2682.30 6917.70
451 451.00 4286.90 4287.80 2691.40 6337.30 2688.20 6932.90
452 452.00 4296.30 4297.20 2697.30 6351.20 2694.10 6948.10
453 453.00 4305.70 4306.60 2703.20 6365.10 2700.00 6963.30
454 454.00 4315.10 4316.00 2709.10 6379.00 2705.90 6978.50
455 455.00 4324.50 4325.40 2715.00 6392.90 2711.80 6993.70
456 456.00 4333.90 4334.80 2720.90 6406.80 2717.70 7008.90
457 457.00 4343.30 4344.20 2726.80 6420.70 2723.60 7024.10
458 458.00 4352.70 4353.60 2732.70 6434.60 2729.50 7039.30
459 459.00 4362.10 4363.00 2738.60 6448.50 2735.40 7054.50
460 460.00 4371.50 4372.40 2744.50 6462.40 2741.30 7069.70
461 461.00 4380.90 4381.80 2750.40 6476.30 2747.20 7084.90
462 462.00 4390.30 4391.20 2756.30 6490.20 2753.10 7100.10
463 463.00 4399.70 4400.60 2762.20 6504.10 2759.00 7115.30
464 464.00 4409.10 4410.00 2768.10 6518.00 2764.90 7130.50
465 465.00 4418.50 4419.40 2774.00 6531.90 2770.80 7145.70
466 466.00 4427.90 4428.80 2779.90 6545.80 2776.70 7160.90
467 467.00 4437.30 4438.20 2785.80 6559.70 2782.60 7176.10
468 468.00 4446.70 4447.60 2791.70 6573.60 2788.50 7191.30
469 469.00 4456.10 4457.00 2797.60 6587.50 2794.40 7206.50
470 470.00 4465.50 4466.40 2803.50 6601.40 2800.30 7221.70
471 471.00 4474.90 4475.80 2809.40 6615.30 2806.20 7236.90
472 472.00 4484.30 4485.20 2815.30 6629.20 2812.10 7252.10
473 473.00 4493.70 4494.60 2821.20 6643.10 2818.00 7267.30
474 474.00 4503.10 4504.00 2827.10 6657.00 2823.90 7282.50
475 475.00 4512.50 4513.40 2833.00 6670.90 2829.80 7297.70
476 476.00 4521.90 4522.80 2838.90 6684.80 2835.70 7312.90
 PCC
Rubble/Size Cement/Steel/RC
Earth/Sand/G Slabs/Shabad
Sl. Lead in Stone/Cut C poles/A.C & G.I
ravel/Murrum/ Slabs/CC & Water Bricks
No Kms Stone/Coarse Sheets/Packed
Lime/Surki Laterite
aggregates materials
Blocks/Wood

1 1 2 3 4 5 6 7
477 477.00 4531.30 4532.20 2844.80 6698.70 2841.60 7328.10
478 478.00 4540.70 4541.60 2850.70 6712.60 2847.50 7343.30
479 479.00 4550.10 4551.00 2856.60 6726.50 2853.40 7358.50
480 480.00 4559.50 4560.40 2862.50 6740.40 2859.30 7373.70
481 481.00 4568.90 4569.80 2868.40 6754.30 2865.20 7388.90
482 482.00 4578.30 4579.20 2874.30 6768.20 2871.10 7404.10
483 483.00 4587.70 4588.60 2880.20 6782.10 2877.00 7419.30
484 484.00 4597.10 4598.00 2886.10 6796.00 2882.90 7434.50
485 485.00 4606.50 4607.40 2892.00 6809.90 2888.80 7449.70
486 486.00 4615.90 4616.80 2897.90 6823.80 2894.70 7464.90
487 487.00 4625.30 4626.20 2903.80 6837.70 2900.60 7480.10
488 488.00 4634.70 4635.60 2909.70 6851.60 2906.50 7495.30
489 489.00 4644.10 4645.00 2915.60 6865.50 2912.40 7510.50
490 490.00 4653.50 4654.40 2921.50 6879.40 2918.30 7525.70
491 491.00 4662.90 4663.80 2927.40 6893.30 2924.20 7540.90
492 492.00 4672.30 4673.20 2933.30 6907.20 2930.10 7556.10
493 493.00 4681.70 4682.60 2939.20 6921.10 2936.00 7571.30
494 494.00 4691.10 4692.00 2945.10 6935.00 2941.90 7586.50
495 495.00 4700.50 4701.40 2951.00 6948.90 2947.80 7601.70
496 496.00 4709.90 4710.80 2956.90 6962.80 2953.70 7616.90
497 497.00 4719.30 4720.20 2962.80 6976.70 2959.60 7632.10
498 498.00 4728.70 4729.60 2968.70 6990.60 2965.50 7647.30
499 499.00 4738.10 4739.00 2974.60 7004.50 2971.40 7662.50
500 500.00 4747.50 4748.40 2980.50 7018.40 2977.30 7677.70
501 501.00 4756.90 4757.80 2986.40 7032.30 2983.20 7692.90
502 502.00 4766.30 4767.20 2992.30 7046.20 2989.10 7708.10
503 503.00 4775.70 4776.60 2998.20 7060.10 2995.00 7723.30
504 504.00 4785.10 4786.00 3004.10 7074.00 3000.90 7738.50
505 505.00 4794.50 4795.40 3010.00 7087.90 3006.80 7753.70
506 506.00 4803.90 4804.80 3015.90 7101.80 3012.70 7768.90
507 507.00 4813.30 4814.20 3021.80 7115.70 3018.60 7784.10
508 508.00 4822.70 4823.60 3027.70 7129.60 3024.50 7799.30
509 509.00 4832.10 4833.00 3033.60 7143.50 3030.40 7814.50
510 510.00 4841.50 4842.40 3039.50 7157.40 3036.30 7829.70
511 511.00 4850.90 4851.80 3045.40 7171.30 3042.20 7844.90
512 512.00 4860.30 4861.20 3051.30 7185.20 3048.10 7860.10
513 513.00 4869.70 4870.60 3057.20 7199.10 3054.00 7875.30
514 514.00 4879.10 4880.00 3063.10 7213.00 3059.90 7890.50
515 515.00 4888.50 4889.40 3069.00 7226.90 3065.80 7905.70
 LEAD CHART

Name of the work : Improving Infrastructure Facilities to Govt.Polytechnic at Srikakulam (V&M) in Srikakulam District
Under Nadu - Nedu
RATES AS PER COMMON SSR OF 2019-20 with cement and steel rates of 09.09.2018

Lead in KM Initial Cost Add Area

including Differenc allowence
Avg. 1%
Sl. SSR Source of Convence Stacking in Loading unloading on loading &
Description Thickness towards Total Unit per
No. Sl.No. Material Charges Charges Seignio- charges charges unloading
in mm MR CT Total storage
wherever rage charges @
necesssary Charges 25 %

(1) (2) (3) (4) (5) (6) (7) (8) (9) (10) (11) (12) (13) (14) (15) (16) (17)
Sand (un-screened) for
1 Killipalem 10.00 0.00 10.00 103.50 510.00 0.00 0.00 0.00 0.00 0.00 613.50 Cum.
Concrete & Filtering items

Sand (screened) for Modified rate Vide

Mortar, Plastering items and Sand Lr.No.ENC/IW/SE(P&M)/EE.1
2 Killipalem 10.00 0.00 10.00 103.50 590.00 0.00 0.00 0.00 0.00 0.00 693.50 Cum.
blasting / DEE.2/AAA(k)SoR2019-
items 20/Vol-4,Dt.25.10.2019

Sand (unscreened) for

3 Killipalem 10.00 0.00 10.00 103.50 375.00 0.00 0.00 0.00 0.00 0.00 478.50 Cum.
filling& blindage

P.No.20 @
4 Gravel Local 6.00 0.00 6.00 58.30 113.00 0.00 0.00 0.00 0.00 0.00 171.30 Cum.
Sl.no.90,item No.20

5 Random Rubble Stone M-148 Singupuram 11.00 0.00 11.00 127.00 250.00 0.00 0.00 0.00 0.00 0.00 377.00 Cum.

Coursed rubble stone 30 x 30 x 60 Part I-Basic Input data for WR Work items – Common SoR 2019-20SlSl.no.14,
6 Singupuram 11.00 0.00 11.00 127.00 500.00 0.00 0.00 0.00 0.00 0.00 627.00 Cum.
cm

Through stones 25 x 25 x 45 to 60 Part I-Basic Input data for WR Work items – Common SoR 2019-20SlSl.no.76
7 Singupuram 11.00 0.00 11.00 127.00 1188.57 0.00 0.00 0.00 0.00 0.00 1315.57 Cum.
cm long

Part I - Materials not

covered under WR
Aggregates 40 mm nominal size
8 Work items basic data– Singupuram 11.00 0.00 11.00 127.00 830.00 0.00 0.00 0.00 0.00 0.00 957.00 Cum.
(IS383-1970)
Common SoR 2019-20
@P.No.29, M-055

LEAD 138
 Lead in KM Initial Cost Add Area
including Differenc allowence
Avg. 1%
Sl. SSR Source of Convence Stacking in Loading unloading on loading &
Description Thickness towards Total Unit per
No. Sl.No. Material Charges Charges Seignio- charges charges unloading
in mm MR CT Total storage
wherever rage charges @
necesssary Charges 25 %

(1) (2) (3) (4) (5) (6) (7) (8) (9) (10) (11) (12) (13) (14) (15) (16) (17)

Aggregates 20 mm nominal size

9 .-do-, @P.No.29,M-053 Singupuram 11.00 0.00 11.00 127.00 1340.00 0.00 0.00 0.00 0.00 0.00 1467.00 Cum.
M/c chips (IS383-1970)

Aggregates 13.2/12.5 mm nominal

10 size M/c chips (IS383- .-do-,@P.No.29,M-052 Singupuram 11.00 0.00 11.00 127.00 1080.00 0.00 0.00 0.00 0.00 0.00 1207.00 Cum.
1970)

Aggregates 10 mm nominal size

11 .-do-,@P.No.29,,M-051 Singupuram 11.00 0.00 11.00 127.00 920.00 0.00 0.00 0.00 0.00 0.00 1047.00 Cum.
M/c chips (IS383-1970)

Aggregates 6 mm nominal size

12 .-do-,@P.No.29,M-050 Singupuram 11.00 0.00 11.00 127.00 725.00 0.00 0.00 0.00 0.00 0.00 852.00 Cum.
M/c chips (IS383-1970)

2nd Class Bricks of size

13 BMT-A.01 Local 6.00 0.00 6.00 94.50 6000.00 0.00 0.00 54.80 54.80 13.70 6217.80 1000 Nos
23x11x7cm

Fly Ash Bricks of size 290 x100

14 x140 mm with compressive BMT-A.13 1 Local 6.00 0.00 6.00 94.50 11000.00 0.00 0.00 54.80 54.80 13.70 11217.80 1000 Nos
strength of 50 Kg /sq.cm

Fly Ash Bricks of size 290 x225 x

15 140 mm with compressive strength BMT-A.10 1 Local 6.00 0.00 6.00 94.50 24000.00 0.00 0.00 54.80 54.80 13.70 24217.80 1000 Nos
of 50 Kg/sq .cm

Fly Ash Bricks of size 290 x200 x

15 140 mm with compressive strength BMT-A.11 1 Local 6.00 0.00 6.00 94.50 20000.00 0.00 0.00 54.80 54.80 13.70 20217.80 1000 Nos
of 50 Kg/sq .cm

Polished Bethamcherla pure white

Bethamcherl
stone minimum of 25 mm thick BMT-B.07 25 850.00 0.00 850.00 11883.40 383.40 0.00 0.00 0.50 0.00 12267.30 1Sqm.
a
(0.254M x 0.254M)

Polished Bethamcherla Coloured

Bethamcherl
stone minimum of 25 mm thick BMT-B.08 25 850.00 0.00 850.00 11883.40 268.30 0.00 0.00 0.50 0.00 12152.20 1Sqm.
a
(0.254M x 0.254M)

LEAD 139
 Lead in KM Initial Cost Add Area
including Differenc allowence
Avg. 1%
Sl. SSR Source of Convence Stacking in Loading unloading on loading &
Description Thickness towards Total Unit per
No. Sl.No. Material Charges Charges Seignio- charges charges unloading
in mm MR CT Total storage
wherever rage charges @
necesssary Charges 25 %

(1) (2) (3) (4) (5) (6) (7) (8) (9) (10) (11) (12) (13) (14) (15) (16) (17)

Polished Black Kadapa slabs

16 minimum of 15 mm thick (0.457M BMT-B.06 15 Kadapa 850.00 0.00 850.00 11883.40 134.30 0.00 0.00 0.30 0.07 12018.07 1Sqm.
x 0.457M)

Rough Kadapa slabs of minimum

17 40 mm thick, size not less than BMT-B.01 40 Kadapa 850.00 0.00 850.00 11883.40 96.00 0.00 0.00 0.80 0.20 11980.40 1Sqm.
(0.457 x 457M)

Polished Marble Slabs of any

Narasanbna
18 variety 16 to 20 mm thick (size BMT-B.12 18 28.00 0.00 28.00 186.60 648.00 0.00 0.00 0.36 0.09 835.05 1Sqm.
peta
0.457 x 0.457 M / 0.6 x 0.6 M)

High Polished Granite 16 to 18

Narasanbna
19 mm thick up to 2.43 M BMT-B.11 17 28.00 0.00 28.00 186.60 1991.00 0.00 0.34 0.08 2178.02 1Sqm.
peta
black

High Polished Granite 16 to 18

mm thick up to 2.43 M Narasanbna
19 BMT-B.10 17 28.00 0.00 28.00 186.60 2342.00 0.00 0.34 0.08 2529.02 1Sqm.
other than black and regular peta
colours

M-
20 water Local 0.50 0.00 0.50 0.00 80.00 0.00 80.00 KL
189(a)

Page No.11 @
sl.No.07,Cement 43
21 Cement Gr/53 Gr At Site 0.00 0.00 0.00 4300.00 0.00 0.00 0.00 0.00 0.00 4300.00 M.T
Note: Rate as fixed by
the Government

22 Mild Steel Bars (Fe 250) for 6mm At Site 0.00 0.00 0.00 35000.00 0.00 0.00 0.00 78.80 19.70 35098.50 M.T

High Yield Strength Deformed

23 Bars (Fe 415) for 8mm to 40mm At Site 0.00 0.00 0.00 36500.00 0.00 0.00 0.00 78.80 19.70 36598.50 M.T
dia

High Yield Strength Deformed

23 Bars (Fe 500D) for 8mm to 40mm At Site 0.00 0.00 0.00 37000.00 0.00 0.00 0.00 78.80 19.70 37098.50 M.T
Aug-19
dia

Mild Steel, Structural steel, I,e,

24 At Site 0.00 0.00 0.00 38500.00 0.00 0.00 0.00 78.80 19.70 38598.50 M.T
Angles, Channels & I-Sections

25 M.S. Flats At Site 0.00 0.00 0.00 40000.00 0.00 0.00 0.00 78.80 19.70 40098.50 M.T

26 M.S. Plates At Site 0.00 0.00 0.00 39500.00 0.00 0.00 0.00 78.80 19.70 39598.50 M.T

CERTIFICATES:-

LEAD 140
 Lead in KM Initial Cost Add Area
including Differenc allowence
Avg. 1%
Sl. SSR Source of Convence Stacking in Loading unloading on loading &
Description Thickness towards Total Unit per
No. Sl.No. Material Charges Charges Seignio- charges charges unloading
in mm MR CT Total storage
wherever rage charges @
necesssary Charges 25 %

(1) (2) (3) (4) (5) (6) (7) (8) (9) (10) (11) (12) (13) (14) (15) (16) (17)
1 Certified that the above leads are true and correct to the best of my knowledge
2 Certified that the quarry requries blasting for RR, CRS, 6mm, 10mm, 12mm, 20mm & 40mm Metal

3 Certified that the 20mm, 12mm, 10mm, 6mm Metal requires Machine Crushing
4 Certified that the work site does not falls within 12 Kms belt of Amadalavalasa municipality/ Corporation Limits and hence 25% extra allowence is required

Assistant Engineer Dy. Executive Engineer Executive Engineer

APEWIDC, Srikakulam APEWIDC,Srikakulam APEWIDC,Srikakulam

LEAD 141
 DATA
Name of the work : Improving Infrastructure Facilities to Govt.Polytechnic at Srikakulam (V&M) in
Srikakulam District
Under Nadu - Nedu

Overheads 0.000%
COMMON STANDARD SCHEDULE OF RATES FOR THE YEAR 2019-2020
AGENCY / MUNICIPAL / LALI
25%
ALLOWANCE
Total length of compound wall 1400 Rmt

total length of water supply pipe Rmt

line
total length of external drainage 600 Rmt
pipe line
Total length of internal roads 1000 Rmt

LABOUR CHARGES
Final Rate
SSR Initial
Sl.No Description Unit
Sl.No. Rate

1 1st class mason Page 500.00 625.00 per day

No.10,
Sl.No.2-b

2 2nd class mason Page 460.00 575.00 per day

No.11,
Sl.No.44-
a

3 1st class Carpenter Page 725.00 per day

No.10, 580.00
Sl.No.3-c
4 2nd class Carpenter Page 575.00 per day
No.11,
460.00
Sl.No.46-
c
5 1st class Brick Layer 625.00 per day
Page
No.10, 500.00
Sl.No.2-b

6 2nd class Brick layer 575.00 per day

Page
No.11,
460.00
Sl.No.45-
b
7 Blacksmith 1st class Page 495.00 618.75 per day
No.12,
Sl.No.49-f
8 Bar bender I Class Page 625.00 781.25 per day
No.10,
Sl.No.15-
3
9 Blacksmith I I Class 0.00 per day
0 0.00

Page 142 of 222

10 Operaor Jack hammer/Pneumatic 637.50 per day
tamper Page
No.6, 510.00
Sl.No.23

11 Blaster Page 712.50 per day

No.10,
570.00
Sl.No.14-
6
12 Driller 712.50 per day
Page
No.11, 570.00
Sl.No.31

13 Mate 588.75 per day

Page
No.12,
471.00
Sl.No.71-
21
14 Plumber/Fitter 1st class Page 725.00 per day
No.7, 580.00
Sl.No.36
15 Plumber/Fitter 2nd class 575.00 per day
Page
No.12,
460.00
Sl.No.51-
h
16 1st class Painter Page 725.00 per day
No.10, 580.00
Sl.No.4-d
17 2nd class Painter Page 575.00 per day
No.11,
460.00
Sl.No.47-
d
18 Head mazdoor Page 575.00 per day
No.12,
460.00
Sl.No.72-
1
19 Man mazdoor Page 525.00 per day
No.12,
420.00
Sl.No.73-
2
20 Woman mazdoor 525.00 per day
Page
No.12,
420.00
Sl.No.75-
5
21 Skilled Electritian 718.75 per day
Page
No.10, 575.00
Sl.No.8-h
22 Cost of binding wire 55.00 per Kg
Page
No.24, 55.00
Sl.No.173

Page 143 of 222

23 Labour charges for fixing Flush 383.00 per Sqmt.
door shutters of any
thickness to the existing door
frame including fixing the BMM-
383.00
fixtures to the door shutter V.23
excluding cost of shutter

24 Labour charges for wrought and 754.00

put up including fixing in
position frames of any size,
shutters for doors, windows,
ventilators including fixing all BMM-
necessary fixtures etc. for 754.00 per Sqmt.
V.42
Other than teakwood Flush type
door shutter including frame

SCAFFOLDING CHARGES
rate per (0.225M
BRICK MASONRY 0.115 thick
sqm THICK)
For Superstructure in FF over the 982 71.76 312.00 1.00 cum. 624.00
a) rate of foundation and basement

For Superstructure in SF over the 983 97.71 424.83 1.00 cum. 849.65
b) rate of FF superstructure

For Superstructure in 3rd floor 984 123.67 537.70 1.00 cum. 1075.39
c) over the rate 2nd floor
superstructre
d) Add for every additional floor 985 29.00 126.09 1.00 cum. 252.17
over 2nd floorfor Plastering of
Scaffolding
walls,ceiling or painting of roof
timber,or walls where height is
more than 3Mt.
1st and 2nd 986 44.00 10.00 Sqmt.
2nd and 3rd 987 88.00 10.00 Sqmt.
3rd and 4th 988 132.00 10.00 Sqmt.
Add for every additional floor 989 32.00 10.00 Sqmt.
over 4th floor
CENTERING CHARGES (Providing Centring, shuttering and scaffolding with props and steel plate as per the
approved shuttering plan and other accessories as per the norms and stability calculations including cost and
conveyance of all accessories Using Cashewrina Ballies and Wooden runners & staging including all bracings,
cross members etc complete for finished item of work) @ page No.108

Unit of
NAME OF THE Material Hire Centring Charges
Sl Measure Labour charges
STRUCTURAL MEMBER charges for 2018-19
ment
1 2 3 4 5 6
HIRE CHARGES FOR CENTERING & SCAFFOLDING - Unsupported Height upto 3.66 M Casurina Ballies
Bamboos, Wooden Reapers, Runners, Wood Posts, Wall Plates etc.,

FOOTINGS per 1 cum Rs. 288.00 Rs. 631.00 Rs.

A
Bed blocks ,Bands per 1 cum Rs. 64.00 Rs. 325.00 Rs.
B
PEDESTALS per 1 cum Rs. 328.00 Rs. 1004.00 Rs.
C

Page 144 of 222

 PLINTH BEAMS per 1 cum Rs. 1390.00 Rs. 1521.00 Rs.
D
LINTELS per 1 cum Rs. 790.00 Rs. 1251.00 Rs.
E
CHAJJAS - SUNSHADES per 1 sqm Rs. 156.00 Rs. 192.00 Rs.
F
COLUMNS per 1 cum Rs. 238.00 Rs. 1757.00 Rs.
G
BEAMS per 1 cum Rs. 1395.00 Rs. 1473.00 Rs.
H
SLABS - Up to 150 mm thick per 1 sqm Rs. 158.00 Rs. 167.00 Rs.
I
SLABS - above 150 mm - Up to per 1 sqm Rs. 163.00 Rs. 172.00 Rs.
J 300 mm thick
SLABS - above 300 mm thick per 1 sqm Rs. 170.00 Rs. 180.00 Rs.
K
WAFFLE - (GRID) SLABS (Rib per 1 sqm Rs. 575.00 Rs. 607 Rs.
L Beams with Slabs)
PERGOLA SLABS (Only Rib per 1 sqm Rs. 403.00 Rs. 425.00 Rs.
M Beams)
ARCH BEAMS - up to 1.5 M per 1 cum Rs. 1586.00 Rs. 1675.00 Rs.
N Span
ARCH BEAMS - above 1.5 M per 1 cum Rs. 1609.00 Rs. 1698.00 Rs.
O Span
DOME SLABS per 1 cum Rs. 2566.00 Rs. 2708.00 Rs.
P
HELICAL STAIRCASES per 1 sqm Rs. 196.00 Rs. 207.00 Rs.
Q
Shear walls RCC walls,Water per 1 sqm Rs.
tank walls (As per Previous SSR
2016-17)
HIRE CHARGES FOR CENTERING & SCAFFOLDING - Unsupported Height up to 3.66 M - Steel scaffoldin
pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc.,
FOOTINGS per 1 cum Rs. 288.00 Rs. 631.00 Rs.
A
Bed blocks ,Bands per 1 cum Rs. 64.00 Rs. 341.00 Rs.
B
PEDESTALS per 1 cum Rs. 328.00 Rs. 1004.00 Rs.
C
PLINTH BEAMS per 1 cum Rs. 1390.00 Rs. 1521.00 Rs.
D
LINTELS per 1 cum Rs. 1180.00 Rs. 1615.00 Rs.
E
CHAJJAS - SUNSHADES per 1 sqm Rs. 233.00 Rs. 248.00 Rs.
F
COLUMNS per 1 cum Rs. 355.00 Rs. 2268.00 Rs.
G
BEAMS per 1 cum Rs. 2085.00 Rs. 1903.00 Rs.
H
SLABS - Up to 150 mm thick per 1 sqm Rs. 236.00 Rs. 226.00 Rs.
I
SLABS - above 150 mm - Up to per 1 sqm Rs. 243.00 Rs. 233.00 Rs.
J 300 mm thick
SLABS - above 300 mm thick per 1 sqm Rs. 254.00 Rs. 244.00 Rs.
K

Page 145 of 222

 WAFFLE - (GRID) SLABS (Rib per 1 sqm Rs. 858.00 Rs. 783.00 Rs.
L Beams with Slabs)
PERGOLA SLABS (Only Rib per 1 sqm Rs. 602.00 Rs. 549.00 Rs.
M Beams)
ARCH BEAMS - up to 1.5 M per 1 cum Rs. 2370.00 Rs. 2163.00 Rs.
N Span
ARCH BEAMS - above 1.5 M per 1 cum Rs. 2404.00 Rs. 2193.00 Rs.
O Span
DOME SLABS per 1 cum Rs. 3833.00 Rs. 3496.00 Rs.
P

Q HELICAL STAIRCASES per 1 sqm Rs. 292.00 Rs. 267.00 Rs.

Shear walls RCC walls,Water 1206.00

R tank walls (As per Previous SSR per 1 sqm Rs. Rs. 1653.00 Rs.
2018-19)
Unit of
NAME OF THE Material Hire Centring Charges
Sl Measure Labour charges
STRUCTURAL MEMBER charges for 2018-19
ment
1 2 3 4 5 6
FOOTINGS per 1 cum Rs. 62.00 Rs. 372.00 Rs.
A

PEDESTALS per 1 cum Rs. 74.00 Rs. 592.00 Rs.

B

PLINTH BEAMS per 1 cum Rs. 1048.00 Rs. 898.00 Rs.

C

LINTELS per 1 cum Rs. 619.00 Rs. 596.00 Rs.

D

CHAJJAS - SUNSHADES per 1 sqm Rs. 122.00 Rs. 92.00 Rs.

E

COLUMNS per 1 cum Rs. 93.00 Rs. 836.00 Rs.

F

BEAMS per 1 cum Rs. 936.00 Rs. 701.00 Rs.

G

SLABS - Up to 150 mm thick per 1 sqm Rs. 105.00 Rs. 79.00 Rs.
H

SLABS - above 150 mm - Up to per 1 sqm Rs. 109.00 Rs. 82.00 Rs.
I 300 mm thick
SLABS - above 300 mm thick per 1 sqm Rs. 114.00 Rs. 86.00 Rs.
J

WAFFLE - (GRID) SLABS (Rib per 1 sqm Rs. 386.00 Rs. 289.00 Rs.
K Beams with Slabs)
PERGOLA SLABS (Only Rib per 1 sqm Rs. 270.00 Rs. 203.00 Rs.
L Beams)
ARCH BEAMS - up to 1.5 M per 1 cum Rs. 1065.00 Rs. 797.00 Rs.
M Span

ARCH BEAMS - above 1.5 M per 1 cum Rs. 1080.00 Rs. 809.00 Rs.
N Span
DOME SLABS per 1 cum Rs. 2009.00 Rs. 1289.00 Rs.
O

HELICAL STAIRCASES per 1 sqm Rs. 153.00 Rs. 98.00 Rs.

P

HIRE CHARGES FOR ACCESS SCAFFOLDING - up to 3.66 M using Casurina Bellies, Bamboos, Wooden Reapers
Runners, Wood Posts, Wall Plates etc., for BRICK MASONRY/STONE MASONRY - 1 sqm
1st - Floor per 1 sqm Rs. 10.32 Rs. 79.46 Rs.
A

Page 146 of 222

 2nd - Floor per 1 sqm Rs. 10.32 Rs. 113.78 Rs.
B
3rd - Floor per 1 sqm Rs. 10.32 Rs. 148.09 Rs.
C
4th - Floor per 1 sqm Rs. 10.32 Rs. 182.41 Rs.
D
5th - Floor per 1 sqm Rs. 10.32 Rs. 216.72 Rs.
E
6th - Floor per 1 sqm Rs. 10.32 Rs. 251.03 Rs.
F
7th - Floor per 1 sqm Rs. 10.32 Rs. 285.33 Rs.
G

Unit of
NAME OF THE Material Hire Centring Charges
Sl Measure Labour charges
STRUCTURAL MEMBER charges for 2018-19
ment
1 2 3 4 5 6
HIRE CHARGES FOR ACCESS SCAFFOLDING - up to 3.66 M using Casurina Bellies, Bamboos, Woode
Reapers, Runners, Wood Posts, Wall Plates etc., for PLASTERING TO WALLS - 1 sqm
A 1st - Floor per 1 sqm Rs. 1.03 Rs. 7.95 Rs.
1.03
B 2nd -Floor per 1 sqm Rs. Rs. 11.38 Rs.

C 3rd - Floor per 1 sqm Rs. 1.03 Rs. 14.81 Rs.

D 4th - Floor per 1 sqm Rs. 1.03 Rs. 18.24 Rs.

E 5th - Floor per 1 sqm Rs. 1.03 Rs. 21.67 Rs.
F 6th - Floor per 1 sqm Rs. 1.03 Rs. 25.10 Rs.
1.03
H 7th - Floor per 1 sqm Rs. Rs. 28.53 Rs.

HIRE CHARGES FOR STAGE SCAFFOLDING - up to 3.66 M using Casurina Bellies, Bamboos, Woode
Reapers, Runners, Wood Posts, Wall Plates etc., for CEILING PLASTERING - 1 sqm
1st - Floor per 1 sqm Rs. 2.46 Rs. 15.91 Rs.
A
2nd - Floor per 1 sqm Rs. 2.46 Rs. 22.57 Rs.
B
3rd - Floor per 1 sqm Rs. 2.46 Rs. 29.23 Rs.
C
4th - Floor per 1 sqm Rs. 2.46 Rs. 35.90 Rs.
D
5th - Floor per 1 sqm Rs. 2.46 Rs. 42.56 Rs.
E
6th - Floor per 1 sqm Rs. 2.46 Rs. 49.22 Rs.
F
7th - Floor per 1 sqm Rs. 2.46 Rs. 55.89 Rs.
G

CENTERING & SCAFFOLDING CHARGES- FLOOR WISE RATES for Steel scaffolding pipes, jack Props,
Steel Centering Plates,etc., for unsupported height 3.66 M
Chajjas -
Sun
Shades Slabs - Up
Lintels Columns Beams To 150
mm Thick

per 1 sqm per 1

Unit per 1 cum per 1 cum per 1 sqm
cum
Page 147 of 222
 1st - Floor
Material Hire for any Floor H 1180.00 233.00 355.00 2085.00 236.00
Labour Charges for 1st Floor L 1615.00 248.00 2268.00 1903.00 215.00
Total Hire Charges (H+L) T 2795.00 481.00 2623.00 3988.00 451.00
LABOUR CHARGES for Further Floors
2nd - Floor L 1777.00 273.00 2495.00 2093.00 237.00
3rd - Floor L 1938.00 298.00 2722.00 2284.00 258.00
4th - Floor L 2100.00 322.00 2948.00 2474.00 280.00
5th - Floor L 2261.00 347.00 3175.00 2664.00 301.00

CENTERING & SCAFFOLDING CHARGES- FLOOR WISE RATES for Steel scaffolding pipes, jack Props,
Steel Centering Plates,etc., for unsupported height 7.32 M (Note: - Centering & scaffolding charges for steel
scaffolding with pipes, jack props, steel centring plates for unsupported heights of every 610 mm height above
3.66 M may be allowed at 16.666%
more than the basic material hire charges and relevant labour charges of the applicable floor and item)

Chajjas -
Sun
Shades Slabs - Up
Lintels Columns Beams To 150
mm Thick

per 1 sqm per 1

Unit per 1 cum per 1 cum per 1 sqm
cum
1st - Floor
Material Hire for any Floor H 2360.00 466.00 710.00 4170.00 472.00
Labour Charges for 1st Floor L 3230.00 496.00 4536.00 3806.00 430.00
Total Hire Charges (H+L) T 5590.00 962.00 5246.00 7976.00 902.00
CENTERING & SCAFFOLDING CHARGES- FLOOR WISE RATES for Casurina Ballies, Bamboos, Wooden
Reapers, Runners, Wood Posts, Wall plates, Steel Centering Plates,etc., for unsupported height 3.66 M
Chajjas -
Sun
Shades Slabs - Up
Lintels Columns Beams To 150
mm Thick

Unit per 1 sqm per 1

per 1 cum per 1 cum per 1 sqm
cum
1st - Floor
Material Hire for any Floor H 790.00 156.00 238.00 1395.00 158.00
Labour Charges for 1st Floor L 1251.00 192.00 1757.00 1473.00 167.00
Total Hire Charges (H+L) T 2041.00 348.00 1995.00 2868.00 325.00
LABOUR CHARGES for Further Floors
2nd - Floor L 1376.00 211.00 1933.00 1620.00 184.00
3rd - Floor L 1501.00 230.00 2108.00 1768.00 200.00
4th - Floor L 1626.00 250.00 2284.00 1915.00 217.00
5th - Floor L 1751.00 269.00 2460.00 2062.00 234.00

total
MATERIAL RATES OF MISCELLANEOUS BUILDING ITEMS
SSR Sl. Rate
Sl. No Description of Item Unit
No
1 2 3 4 5
1 White Cement BMS-W.68 Kg 27.00
2 supply of paint grade white lime BMT-J.26 Kg 19.60 19.60
for wash
Page 148 of 222
3 Water proof Cement paint of BMT-J.23 Kg 49.00
Superior Quality
4 Water proof Cement paint PACK BMT-J.25 Kg 40.36 40.36

5 DRY Distemper POWDER BMT-J.20 Ltr 40.00

6 Oil Bound Washable Distemper BMT-J.21 Kg 81.00
Acrylic based
7 Wood Primer BMT-J.05 Ltr 130.00
8 Putty for wood work BMT-J.07 Kg. 130.00 1.00 Kg #VALUE!
9 Supply of Red Oxide Primer Paint BMT-J.03 Ltr 121.00
for iron works of Grade - I

10 Supply of well burnt cinder BMT-A.17 614.00

aggregates
11 Supply of acrylic emulsion paint 168.00
interior grade having
VOC(Volatile Organic BMT-J.24 Litre
Compound) content less than 50
12 grams/liter.
Supply of water based Cement BMT-J.02 Kg 180.00
Primer of Exterior Grade- 2

13 Supply of acrylic interior 194.00

emulsion paint having VOC
(Volatile
BMT-J.34 Litre
Organic Compound) content less
than 50 grams/ liter.

14 Supply of water based Cement BMT-J.01 Kg 141.00

Primer of Interior Grade- 1
15 Mild Steel Tubes & pipes of all BMT-F.04 Kgs. 60.00
diameters
16 Fabrication, Cutting and Fixing BMM- Kgs. 24.00
charges V.16
17 Supply of Pre-painted Galvalume BMS- Sqmt 377.00
Trapezoidal Profile Roofing W.56
sheets with 0.47 mm thickness,
Coating : Alu-Zinc coating AZ
150 GSM. Tensile Strength : 550
MPA. Paint coatig : Regular
Modified Polyester painting:
Painting Thickness (Top) : 18 to
20 Microns, (Bottom): 5 to 7
Microns. Sheet Width: 1.020,
Length : Maximum 12 Meters
with Regular Range Colours.

18 8mm dia G.I.J bolts & nuts BMS- Nos. 9.00

W.64

19 G.I washers Bitumen washers BMS- Nos. 2.00

W.65

20 Bitumen washers BMS- Nos. 2.00

W.67

21 Cost of 110mm dia PVC Pipe. Table 20 Rmt. 162.00

of PH
SSR

Page 149 of 222

22 Cost of 110 mm dia - Plain Bend BMW- No. 70.00
87.5 Degree - UPVC/SWR Pipe G.57
fittings
23 Cost 110 mm dia - 45 Degree BMW- No. 59.00
Bend - UPVC/SWR Pipe fittings G.63
24 Cost of 110 mm - Pipe Clip - BMW- Nos. 15.00
UPVC/SWR Pipe fittings G.106
25 Supply of acrylic emulsion paint 214.00
weather proof
waterbased,modified acrylic with
silicon additives exterior grade BMT-J.35 Litre
having VOC (Volatile Organic
Compound ) content less
than 50 grams/ liter
26 Supply of ready mixed Synthetic BMT-J.29 Ltr 248.00
Enamel paints in all shades Grade
- I having VOC (Volatile Organic
Compound ) content less than 50
grams/ liter.

27 Supply of synthetic polymer BMT-J.22 Ltr 404.00

luxury plastic emulsion paint of
superior grade having VOC
(Volatile Organic Compound)
content less than 50 grams/ liter.
28 Two component sysem High BMT-H.26 Kg 134.00
durable cementitious acrylic
based waterproofing systems :
Complies with ASTM D

29 Rabbit wire mesh (Chicken Mesh) BMT-F.28 Sqmt. 17.00

of not less than 30 gauge
30 Cement Jally 50mm thick BMS- Sqmt. 340.00
W.17
31 Fabrication charges for steel 27.00
works like windows, Grills,
Compound Wall Grills,Iron
Doors, Windows including cost of BMM-
Welding rods,power charges, Job
V.14
excluding cost of fixing in
position.

32 Fixing charges for iron doors,Iron 5.00

windows and windows Grills in BMM- Job
position. V.15

33 Flat nosing to Kadapa/Shahabad BMM- Rmt. 50.00

Stone Slabs of any thick. V.13

34 Supply of Non-skid red or white 370.00

full body Ceramic floor tiles of
size 300 x 300 mm and thickness
between 7-8 mm 1st quality BMT-C.01 Sqmt.
conforming to IS:13711,
IS:13712, IS:13630
(Parts 1 to 15) of any colour and
finish in all shades and Designs

Page 150 of 222

35 Supply of Non-skid red or white 374.00
full body Ceramic floortiles of
size 450 x 450 mm and thickness
between 7-8 mm1st quality
conforming to IS:13711, BMT-C.02 Sqmt.
IS:13712, IS:13630
(Parts 1 to 15) of any colour and
finish in all shades and Designs
36 Supply of glazed red or white full BMT-C.21 Sqmt. 323.00
body ceramic wall tiles of size
200 x 300 mm / 245 mm x 325
mm and thickness 6 mm 1st
quality conforming to IS:13711,
IS:13712, IS:13630 (Parts 1 to 15)
of any colour and finish in all
shades and Designs

37 Supply of glazed red or white full BMT-C.22 Sqmt. 396.00

body ceramic wall tiles of size
300 x 450 mm / 320 mm x 400
mm and thickness 6 mm 1st
quality conforming to IS:13711,
IS:13712, IS:13630 (Parts 1 to 15)
of any colour and finish in all
shades and Designs

38 Half Rounding the edges ofBMM-V.10 Sqmt. 318.00

Marble/ Granite stone slabs of all
thickness including polishing the
games.

38 Polished Marble slabs of Dongari/ BMT-B.12 Sqmt. 648.00

Adanga/ Marodh/ Rajgangpur
etc., variety of thickness between
16 mm to 20 mm of sizes from
600 mm to 900 mm
39 High polished Granite 16 to 18 BMT-B.10 Sqmt. 2342.00
mm thick up to 8' 00" (2.43M)
other than black and regular
colours
40 High polished Granite 16 to 18 BMT-B.11 Sqmt. 1991.00
mm thick up to 8' 00" (2.43M)
black
41 Supply of soluble salt porcelain BMT-C.06 Sqmt. 418.00
vitrified tiles screen printed
and polished of size 600 x 600
mm and thickness between 8- 10
mm 1st quality conforming to
IS:13711, IS:13712, IS:13630
(Parts 1 to 15) of any colour and
finish in all shades and Designs

Page 151 of 222

42 Supply of Nano polished /stain BMT-C.07 Sqmt. 421.00
free soluble salt porcelain vitrified
tiles screen printed of size 600 x
600 mm and thickness between 8-
10 mm 1st quality conforming to
IS:13711, IS:13712, IS:13630
(Parts 1 to 15) of any colour and
finish in all shades and Designs

43 AC Sheet Corrugated 6mm thick BMT- Sqmt. 204.00

E.17
44 Mastic Pad 0.60 x 1.20 Mts, BMS- Sqmt. 839.00
25.4mm thick W.20

45 Mastic Pad 0.60 x 1.20 Mts, BMS- Sqmt. 481.00

12.7mm thick W.21
Chlorpyriphos/ Lindane BMS- Litrs 217.00
emulsifiable concentrate of 20% W.09

46 Supplying & fixing collapsible 2798.00

steel shutters with vertical, double
BMT-F.30 Sqmt.
channel of 20 x10x2 mm

47 Supply & fixing of Rolling shutter 3198.00

made of 80 x 1.25 mm BMT-F.29 Sqmt.

Cost of alluminium sheet 24 256.00

Gauge BMS-W.18 Sqmt.

DATA
Name of the work : Improving Infrastructure Facilities to Govt.Polytechnic at Srikakulam (V&M) in
Srikakulam District
Qty Rate Per Amount
Under Nadu - Nedu
CEMENT MORTAR (1:2)
Material
Cost of Sand 1.05 Cum 693.50 1.00 Cum 728.18
Cost of Cement 720 Kgs 4300.00 1000.00 Kgs 3096.00
Man Power
Light Mazdoor 0.20 Nos 525.00 1.00 Day 105.00

Rate per cum. 3929.18

CEMENT MORTAR (1:3)

Material
Cost of Sand 1.05 Cum 693.50 1.00 Cum 728.18

Cost of Cement 480 Kgs 4300.00 1000.00 Kgs 2064.00

Man Power
Light Mazdoor 0.20 Nos 525.00 1.00 Day 105.00

Rate per cum. 2897.18

CEMENT MORTAR (1:4)

Material
Cost of Sand 1.05 Cum 693.50 1.00 Cum 728.18

Page 152 of 222

 Cost of Cement 360 Kgs 4300.00 1000.00 Kgs 1548.00

Man Power
Light Mazdoor 0.20 Nos 525.00 1.00 Day 105.00
Rate per cum. 2381.18

CEMENT MORTAR (1:5)

Material
Cost of Sand 1.05 Cum 693.50 1.00 Cum 728.18
Cost of Cement 288 Kgs 4300.00 1000.00 Kgs 1238.40
Man Power
Light Mazdoor 0.20 Nos 525.00 1.00 Day 105.00
Rate per cum. 2071.58

CEMENT MORTAR (1:6)

Material
Cost of Sand 1.05 Cum 693.50 1.00 Cum 728.18
Cost of Cement 240 Kgs 4300.00 1000.00 Kgs 1032.00
Man Power
Light Mazdoor 0.20 Nos 525.00 1.00 Day 105.00
Rate per cum. 1865.18

CEMENT MORTAR (1:8)

Material
Cost of Sand 1.05 Cum 693.50 1.00 Cum 728.18
Cost of Cement 180 Kgs 4300.00 1000.00 Kgs 774.00
Man Power
Light Mazdoor 0.20 Nos 525.00 1.00 Day 105.00
Rate per cum. 1607.18
Cost andConvenyance of 20mm
to 6mm HBG Graded Metal /
(Trap Metal)
20mm 0.60 Cum 1467.00 1.00 Cum 880.20
12mm 0.15 Cum 1207.00 1.00 Cum 181.05
10mm 0.15 Cum 1047.00 1.00 Cum 157.05
6mm 0.10 Cum 852.00 1.00 Cum 85.20
Rate per 1 cum. Total 1303.50

Cost and Convenyance of 12mm

to 6mm HBG Graded Metal /
(Trap Metal)

12mm 0.60 Cum 1207.00 1.00 Cum 724.20

10mm 0.20 Cum 1047.00 1.00 Cum 209.40
6mm 0.20 Cum 852.00 1.00 Cum 170.40
Rate per 1 cum. Total 1104.00
Hire charges of machinery
fuel
Hire charges crew
SL. No Description of machinery Units total
charges charges
1 97.70

P.No.45@sl.
Concrete
No.16
mixer 300/200 (diesel) Hour 44.50 252.20 394.40

Page 153 of 222

2 127.60
P.No.45
Batching
@sl. No.9
plant 0.5 cum Hour 95.30 387.40 610.30

3 21.20

P.No.45
Needle
@sl. vibrator
No.40 40 mm (petrol) Hour 6.40 181.50 209.10

1213.80
Rate (Rs.) Amount
Sl. No. Description Quantity Per Unit
(Rs.)
1 Earth work excavation and depositing on bank with initial lead of 10m and initial lift of
3m in Loamy & Clayey Soils like BC Soils, Red Earth & Ordinary Gravelly Soils ( SS
20-B) including all operational incidental labour charges such as shoring, strutting,
sheeting, planking and dewatering including cost of hire charges of T & P, labour charges
etc., complete for finished item of work including seignerage charges excluding dewatering
charges etc., complete for Foundation of Building.(APSS No. 308)

Light Mazdoor 0.364 Nos 525.00 1.00 Day 191.10

Add 75% for excavation of 1 cum. 0.00 1.00 cum. 0.00
foundation of building

add seigniorage charges 1 cum 0.00 1.00 cum 0.00

191.10 cum. 0.00000 1.00 cum. 0.00
Add Overheads & Contractors
Profit @13.615%

Rate per 1 cum. Total 191.10

Earth work excavation and depositing on bank with initial lead of 10m and initial lift of
3m in Loamy & Clayey Soils like BC Soils, Red Earth & Ordinary Gravelly Soils ( SS
20-B) including all operational incidental labour charges such as shoring, strutting,
a) sheeting, planking and dewatering including cost of hire charges of T & P, labour charges
etc., complete for finished item of work including seignerage charges excluding dewatering
charges etc., complete for Pipe line where the depth is more than 1.5 times width.
(APSS No. 308)
Light Mazdoor 0.364 Nos 525.00 1.00 Day 191.10
Add 120 % for excavation of Pipe 1 cum. 229.32 1.00 cum. 229.32
line

add seigniorage charges 1 cum 0.00 1.00 cum 0.00

Add Overheads & Contractors 420.42 cum. 0.00000 1.00 cum. 0.00
Profit @13.615%

Rate per 1 cum. Total 420.45

Earth work excavation and depositing on bank with initial lead of 10m and initial lift of
3m in Loamy & Clayey Soils like BC Soils, Red Earth & Ordinary Gravelly Soils ( SS
20-B) including all operational incidental labour charges such as shoring, strutting,
b) sheeting, planking and dewatering including cost of hire charges of T & P, labour charges
etc., complete for finished item of work including seignerage charges excluding dewatering
charges etc., complete for Septic tank soak pit and sump.(APSS No. 308)

Light Mazdoor 0.364 nos 525.00 1.00 nos 191.10

add seigniorage charges 1 cum 0.00 1.00 cum 0.00

Page 154 of 222

 191.10
Add Overheads & Contractors 191.10 0.00000 1.00 0.00
Profit @13.615%
Rate per 1 cum. Total 191.10

Earth work excavation for foundations (Mechanical Means) for buildings in ordinary
soils and depositing on bank for all lifts and with an initial lead of 10m and up to 3m
depth including all operational,incidental, labour charges such as shoring, sheeting,
c) planking, strutting etc., and overheads & contractors profit complete for finished item of
work excluding dewatering charges etc., as per SS 20 B(APSS 308)

(BLKD-CSTN-2-2)

Ordinary Soil - Mechanical Means up to 3m depth

Unit : 1 cum
Taking output : 240.00 cum
a) Labour
Mazdoor ( Unskilled) 8.32 Nos. 525.00 1.00 No. 4368.00
b) Machinery

P.No.43@sl.
Shovel No.52
0.85 cum 110hp

1188.50 1.00 Hour 7131.00

Hire charges 6.00 hours

1145.70 1.00 Hour 6874.20

Fuel charges 6.00 hours

Crew charges 6.00 hours 257.40 1.00 Hour 1544.40

Labour Allowence on crew 0.00 0.00

0.00
charges
19917.60
c&d) 82.99
19917.60 0.00
Add Overheads & Contractors
0.00000
Profit @13.615%

Cost for 240 cum ( a+b+c+d) 20000.59

83.34
Rate per 1 cum (a+b+c+d) / 240

Say 83.35

Earth work excavation for foundations for buildings in hard rock (requiring blasting) and
depositing on bank for all lifts and with an initial lead of 10m and up to 3m depth including all
d) operational,incidental, labour charges such as shoring, sheeting, planking, strutting etc., and overheads
& contractors profit complete for finished item of work excluding dewatering charges etc., as per SS 20
B(APSS 308)

(BLKD-CSTN-2-6)
Hard rock (requiring blasting)-
up to 3m depth
Unit : 1 cum
Taking output : 10.00 cum
a) Labour
Page 155 of 222
 Driller 0.50 Nos. 712.50 1.00 No. 356.25
Blaster 0.25 Nos. 712.50 1.00 No. 178.13
Mazdoor ( Unskilled) 8.35 Nos. 525.00 1.00 No. 4383.75
Add MA @ 0% 0.00 4918.13 0.00
b) Machinery
Air compressor 7cmm (diesel) 1.00 hour 1322.00 1.00 Hour 1322.00
Jack hammer/Pneumatic braker 394.00
2.00 hours 1.00 Hour 788.00
Crew charges
Air compressor 232.10
1.00 Hours 1.00 Hour 232.10
Jack hammer/Pneumatic braker 362.70
2.00 Hours 1.00 Hour 725.40
Add MA on crew charges 0.00 957.50 0.00
c)Material
Gelatin 80% 3.50 Kgs 59.00 1.00 Kg 206.50
Detonator electric 14 Nos. 9.00 1.00 No. 126.00
8318.13

Add Overheads & Contractors Pro 0.13615 8318.13 1132.51

Cost for 10 cum ( a+b+c+d) 9450.64
Rate per 1 cum (a+b+c+d) / 10 945.06
Rate per 1 cum Say 945

Earth work excavation for foundations for buildings in hard rock (blasting prohibited) and
depositing on bank for all lifts and with an initial lead of 10m and up to 3m depth including all
operational,incidental, labour charges such as shoring, sheeting, planking, strutting etc., and overheads
e)
& contractors profit complete for finished item of work excluding dewatering charges etc., as per SS 20
B(APSS 308)

(BLKD-CSTN-2-7)
Hard rock (blasting prohibited)- up to 3m depth
Unit : 1 cum
Taking output : 10.00 cum
a) Labour
Mazdoor ( Unskilled) 5.20 Nos. 525.00 1.00 No. 2730.00
0.00 2730.00 0.00
b) Machinery
Air compressor 6.00 Hours 1322.00 1.00 Hour 7932.00
Jack hammer/Pneumatic braker 12.00 Hours 394.00 1.00 Hour 4728.00
Crew charges
Air compressor 6.00 Hours 232.10 1.00 Hour 1392.60
Jack hammer/Pneumatic braker 362.70
12.00 Hours 1.00 Hour 4352.40
Add MA on crew charges 0.00 5745.00 0.00
21135.00

21135.00
Add Overheads & Contractors
Profit @13.615% 0.00000 0.00
Cost for 10 cum ( a+b+c+d) 21135.00
Page 156 of 222
 Rate per 1 cum (a+b+c+d) / 10 2113.50
Rate per 1 cum Say 2114

2 Filling with useful available excavated earth (excluding rock) in trenches, sides of
foundations and basement with initial lead in layers not exceeding 15cm thick,
consolidating each deposited layer by watering and ramming including cost and
conveyence of water to work site and all operational, incidental, labour charges, hire
charges of T & P etc., complete for finished item of work. (APSS NO. 309 & 310)

Light Mazdoor 0.52 Nos 525.00 1.00 Nos 273.00

Water 0.1 KL 80.00 1.00 KL 8.00
Add Overheads & Contractors 281.00 0.000000 1.00 0.00
Profit @13.615%
Rate per 1 cum. Total 281.00

3 Filling with Gravel in trenches, sides of foundations and basement with initial lead in
layers not exceeding 15cm thick, consolidating each deposited layer by watering and
ramming including cost and conveyence of water to the work site and all operational,
incidental, labour charges, seignorage charges, hire charges of T & P etc., complete for
finished item of work. (APSS NO. 309 & 310)

Cost of Gravel 1 cum. 171.30 1.00 cum. 171.30

Light Mazdoor 0.31 Nos 525.00 1.00 Nos 162.75
Water 0.1 KL 80.00 1.00 KL 8.00
Add Overheads & Contractors 342.05 cum. 0.00000 1.00 cum. 0.00
Profit @13.615%
Rate per cum. Total 342.05

4 Filling with Sand Cushion under footings with initial lead in layers not exceeding 15cm
thick, consolidating each deposited layer by watering and ramming including cost and
conveyence of water to the work site and all operational & incidental charges, labour
charges, seignorage charges, hire and opertaional charges of T & P etc., complete for
finished item of work. (APSS NO. 309 & 310)

Cost of Sand 1 cum. 478.50 1.00 cum. 478.50

Light Mazdoor 0.31 Nos 525.00 1.00 Nos 162.75
Water 0.1 KL 80.00 1.00 KL 8.00
Add Overheads & Contractors 649.25 cum. 0.00000 1.00 cum. 0.00
Profit @13.615%
Rate per cum. Total 649.25
5 Plain Cement Concrete corresponding to M5 grade as per IS 456 equivalent to
(1:5:10) proportion nominal mix (cement: fine aggregate: Coarse aggregate) using 40mm
size Hard Blasted Granite (IS383, 1970) metal from approved quarry including cost and
conveyance of all materials like cement, sand, coarse aggregate, water etc. to site,
including seigniorage charges, sales & other taxes on all materials, all operational,
incidental, and labour charges such as mixing, laying and ramming concrete in layers in
position not exceeding 15cm, finishing top surface, curing concrete, etc., complete for
finished item of work for Foundations and Flooring Bed (APSS No. 402)

Material
Cement 129.6 Kgs. 4300.00 1000.00 Kgs. 557.28
Coarse aggregate Metal 40mm 0.9 cum. 957.00 1.00 cum. 861.30
Coarse aggregate Sand 0.45 cum. 613.50 1.00 cum. 276.08
Water 1.2 KL 80.00 1.00 KL 96.00

Page 157 of 222

 Machinery
Concrete mixer300/200 (diesel) 1 Hour 394.40 1.00 Hour 394.40

Labour Allowence on crew 25% 252.20 1.00 63.05

charges

Labour
1st class mason 0.1 Nos. 625.00 1.00 Each 62.50
Light Mazdoor 1.39 Nos. 525.00 1.00 Each 729.75
Add Overheads & Contractors 3040.36 cum. 0.00000 1.00 cum. 0.00
Profit @13.615%

Rate per cum. Total 3040.36

Without over heads 3040.36 cum.
PCC(1:5:10)

6 Plain Cement Concrete corresponding to M7.5 grade as per IS 456 equivalent to

(1:4:8) proportion nominal mix (cement: fine aggregate: Coarse aggregate) using 40mm
size Hard Blasted Granite (IS383, 1970) metal from approved quarry including cost and
conveyance of all materials like cement, sand, coarse aggregate, water etc. to site,
including seigniorage charges, sales & other taxes on all materials, all operational,
incidental, and labour charges such as mixing, laying and ramming concrete in layers in
position not exceeding 15cm, finishing top surface, curing concrete, etc., complete for
finished item of work for Foundations (APSS No. 402)

Material
Cement 162 Kgs. 4300.00 1000.00 Kgs. 696.60
Coarse aggregate Metal 40mm 0.9 cum. 957.00 1.00 cum. 861.30

Coarse aggregate Sand 0.45 cum. 613.50 1.00 cum. 276.08

Water 1.2 KL 80.00 1.00 KL 96.00
Machinery
concrete mixer300/200 (diesel) 1 Hour 394.40 1.00 Hour 394.40

Labour Allowence on crew 25% 252.20 1.00 63.05

charges

Labour
1st class mason 0.1 cum. 625.00 1.00 cum. 62.50
Light Mazdoor 1.39 Nos. 525.00 1.00 Each 729.75
Add Overheads & Contractors 3179.68 cum. 0.00000 1.00 cum. 0.00
Profit @13.615%
Rate per cum. Total 3179.70
7 Plain Cement Concrete corresponding to M5 grade as per IS 456 equivalent to
(1:5:10) proportion nominal mix (cement: fine aggregate: Coarse aggregate) using 20mm
size Hard Blasted Granite (IS383, 1970) Machine Crushed graded metal from approved
quarry including cost and conveyance of all materials like cement, sand, coarse aggregate,
water etc. to site, including seigniorage charges, sales & other taxes on all materials, all
operational, incidental, and labour charges such as mixing, laying concrete, finishing top
surface, curing concrete, etc., complete for finished item of work for Dummy Columns.
(APSS No. 402)
Materal
Cement 129.6 Kgs. 4300.00 1000.00 Kgs. 557.28
Coarse aggregate Graded Metal 0.90 cum. 1303.50 1.00 cum. 1173.15
20mm to 6mm
Page 158 of 222
 Coarse aggregate Sand 0.45 cum. 613.50 1.00 cum. 276.08

Water 1.2 KL 80.00 1.00 KL 96.00

Machinery
concrete mixer300/200 (diesel) 1 Hour 394.40 1.00 Hour 394.40

Labour Allowence on crew 25% 252.20 1.00 63.05

charges

Labour
1st class mason 0.1 cum. 625.00 1.00 cum. 62.50
Light Mazdoor 1.39 Nos. 525.00 1.00 Each 729.75

Total 3352.21
Rate for other Floors GF FF SF TF 4th
Basic Rate of P.C.C(1:5:10) per 3352.21 3352.21 3352.21 3352.21 3352.21
Cum.

Hire charges on centering material 355.00 355.00 355.00 355.00 355.00

Labour charges for centering 2268.00 2495.00 2722.00 2948.00 3175.00

Labour Allowence on centering 25% 567.00 623.75 680.50 737.00 793.75

labour charges
Lift Charges per Cum. 0.00 79.23 158.45 237.68 316.90
6542.21 6905.18 7268.16 7629.88 7992.86

Add Overheads & Contractors 0.00000 0.00 0.00 0.00 0.00 0.00
Profit @13.615%
Rate per cum. Total 6542.25 6905.20 7268.20 7629.90 7992.90

8 Plain Cement Concrete corresponding to M10 grade as per IS 456 equivalent to

(1:3:6) proportion nominal mix (cement: fine aggregate: Coarse aggregate) using 20mm
size Hard Blasted Granite (IS383, 1970) Machine Crushed graded metal from from
approved quarry including cost and conveyance of all materials like cement, sand, coarse
aggregate, water etc. to site, including seigniorage charges, sales & other taxes on all
materials, all operational, incidental and labour charges such as mixing, laying, curing
concrete, etc., complete for finished item of work for Bed Blocks and Hold Fasts (APSS
No. 402)

Material
Cement 216 Kgs. 4300.00 1000.00 Kgs. 928.80
Coarse aggregate Graded Metal 957.00
0.90 cum. 1.00 cum. 861.30
20mm to 6mm
Coarse aggregate Sand 0.45 cum. 613.50 1.00 cum. 276.08

Water 1.2 KL 80.00 1.00 KL 96.00

Machinery
concrete mixer300/200 (diesel) 1 Hour 394.40 1.00 Hour 394.40

Labour Allowence on crew 25% 252.20 1.00 63.05

charges
Labour

Page 159 of 222

 1st class mason 0.1 cum. 625.00 1.00 Each 62.50

Light Mazdoor 1.39 Nos. 525.00 1.00 Each 729.75

Basic rate per Cum. Total 3411.88
Rate for other Floors GF FF SF TF 4th
Basic Rate of P.C.C(1:3:6) per 3411.88 3411.88 3411.88 3411.88 3411.88
Cum.

Hire charges on centering material 64.00 64.00 64.00 64.00 64.00

Labour charges for centering 341.00 375.00 409.00 443.00 477.00

Labour Allowence on centering 25% 85.25 93.75 102.25 110.75 119.25

labour charges
Lift Charges per Cum. 0.00 79.23 158.45 237.68 316.90
3902.13 4023.86 4145.58 4267.31 4389.03
Add Overheads & Contractors 0.00000 0.00 0.00 0.00 0.00 0.00
Profit @13.615%
Rate per cum. Total 3902.15 4023.90 4145.60 4267.35 4389.05

9 Plain Cement Concrete corresponding to M15 grade as per IS 456 equivalent to

(1:2:4) proportion nominal mix (cement: fine aggregate: Coarse aggregate) using 20mm
size Hard Blasted Granite (IS383, 1970) Machine Crushed graded metal from approved
quarry including cost and conveyance of all materials like cement, sand, coarse aggregate,
water etc. to site, including seigniorage charges, sales & other taxes on all materials, all
operational, incidental and labour charges such as mixing, laying, curing concrete, etc.,
complete for finished item of work (APSS No. 402)

Material
Cement 324 Kgs. 4300.00 1000.00 Kgs. 1393.20
Coarse aggregate Graded Metal 0.9 cum. 1303.50 1.00 cum. 1173.15
20mm to 6mm

Coarse aggregate Sand 0.45 cum. 613.50 1.00 cum. 276.08

Water 1.2 KL 80.00 1.00 KL 96.00
Machinery
concrete mixer300/200 (diesel) 1 Hour 394.40 1.00 Hour 394.40
Labour Allowence on crew 25% 252.20 1.00 63.05
charges
Labour
1st class mason 0.1 cum. 625.00 1.00 cum. 62.50
men &women Mazdoor 1.39 Nos. 525.00 1.00 Each 729.75
Basic rate per Cum. Total 4188.13
Rate for other Floors GF FF SF TF 4th
Basic Rate of P.C.C(1:2:4) per 4188.13 4188.13 4188.13 4188.13 4188.13
Cum.
Hire charges on centering material 64.00 64.00 64.00 64.00 64.00
Labour charges for centering 341.00 375.00 409.00 443.00 477.00
Labour Allowence on centering 25% 85.25 93.75 102.25 110.75 119.25
labour charges
Lift Charges per Cum. 0.00 79.23 158.45 237.68 316.90
4678.38 4800.11 4921.83 5043.56 5165.28
Add Overheads & Contractors 0.00000 0.00 0.00 0.00 0.00 0.00
Profit @13.615%
Page 160 of 222
 Rate per cum. Total 4678.40 4800.15 4921.85 5043.60 5165.30

9 Plain Cement Concrete M20 Design Mix ( by weigh batching ) using 20mm size (SS5)
hard blasted granite machine crushed graded metal (Coarse aggregate) from approved
quarry, using a minimum quantity of 350 kgs. of cement per 1 cum of concrete including
cost and conveyance of all materials like cement, fine aggregate (Sand), coarse
aggregate, water etc., to site and cost of seigniorage charges on all materials including steel
centering, shuttering, machine mixing, laying concrete, lift charges, curing etc., complete
for finished item of work for steps (APSS No. 402 )

Material
Cement 350 kgs 4300.00 1000.00 kgs 1505.00
Coarse aggregate Graded Metal 0.80 cum. 1303.50 1.00 cum. 1042.80
20mm to 6mm
Coarse aggregate Sand 0.40 cum. 613.50 1.00 cum. 245.40
Water 1.2 KL 80.00 1.00 KL 96.00
Machinery
Batching plant 0.5 cum 1.333 Hour 610.30 1.00 Hour 813.53
needle vibrator 40 mm (petrol) 1.333 Hour 209.10 1.00 Hour 278.73
Labour Allowence on crew 25% 758.34 1.00 189.59
charges

Labour
1st class Masons 0.1 Nos. 625.00 1.00 Each 62.50
Man and Mazdoor 1.39 Nos. 525.00 1.00 Each 729.75
Basic rate per Cum. 4963.30
Rate for other Floors GF FF SF TF 4th
Basic Rate of P.C.C(1:1.5:3) per 4963.30 4963.30 4963.30 4963.30 4963.30
Cum.

Hire charges on centering material 288.00 288.00 288.00 288.00 288.00

Labour charges for centering 631.00 694.00 757.00 820.00 883.00

Labour Allowence on centering 25% 157.75 173.50 189.25 205.00 220.75

labour charges
Lift Charges per Cum. 0.00 79.23 158.45 237.68 316.90
6040.05 6198.03 6356.00 6513.98 6671.95
Add Overheads & Contractors 0.00000 0.00 0.00 0.00 0.00 0.00
Profit @13.615%
Rate per cum. Total 6040.05 6198.05 6356.00 6514.00 6671.95

11 Random Rubble stone masonry, in CM (1:8) prop: (Cement: Sand) using Hard blasted
Granite stones from approved quarry including cost and conveyance of all materials like
Granite stones, cement, sand, water, etc., to site including seigniorage charges, sales &
other taxes on all materials, all operational, incidental, and labour charges such as cutting
stones to required size and shape, mixing of cement mortar, constructing masonry, curing
etc., complete for finished item of work for foundation and basement (APSS No. 601 &
615)

Cost of cement 59.40 Kgs 4300.00 1000.00 Kgs 255.42

RR Stone 0.50 Cum 377.00 1.00 Cum 188.50
CR 0.44 Cum 627.00 1.00 Cum 275.88

Page 161 of 222

 Through stones 25 x 25x 45 to 60 0.16 Cum 1315.57 1.00 Cum 210.49
cms
Sand 0.33 cum. 693.50 1.00 cum. 228.86
1st Class Mason 1.20 Nos 625.00 1.00 Each 750.00
Light Mazdoor 2.00 Nos 525.00 1.00 Each 1050.00
2959.15
Add Overheads & Contractors 2959.15 cum. 0.00000 1.00 cum. 0.00
Profit @13.615%

Rate per cum. Total 2959.15

12 Coursed Rubble stone masonry 2nd sort, in CM (1:8) prop: (Cement: Sand) using hard
blasted granite stones from approved quarry including cost and conveyance of all materials
like Granite stones, cement, sand, water, etc., to site including seigniorage charges, sales
& other taxes on all materials, all operational, incidental, and labour charges such as
cutting stones to required size and shape, mixing of cement mortar, constructing masonry,
curing etc., complete for finished item of work for foundation and basement (APSS No.
601 & 612)
cost of cement 57.6 Kgs 4300.00 1000.00 Kgs 247.68
CR Stone 0.94 Cum 627.00 1.00 Cum 589.38
Through stones 25 x 25x 45 to 60 0.16 Cum 1315.57 1.00 Cum 210.49
cms
Sand 0.32 cum. 693.50 1.00 cum. 221.92
1st Class Mason 1.50 Nos 625.00 1.00 Each 937.50
Light Mazdoor 2.32 Nos 525.00 1.00 Each 1218.00
3424.97
Add Overheads & Contractors 3424.97 cum. 0.00000 1.00 cum. 0.00
Profit @13.615%
Rate per cum. 3425.00
13 Flush Pointing to CRS / RR Masonry in CM(1:3) Prop: including cost and conveyance
of all materials like cement, sand, water etc., to site, including seigniorage charges, sales &
other taxes on all materials, all operational, incidental charges and labour charges such as
mixing mortar, finishing, curing, etc., complete for finished item of work. (APSS 901,906)

cost of cement 1.44 Kgs 4300.00 1000.00 Kgs 6.19

Sand 0.003 cum. 693.50 1.00 cum. 2.08
1st Class Mason 0.05 Nos. 625.00 1.00 Each 31.25
Man mazdoor 0.074 Nos. 525.00 1.00 Each 38.85
78.37
Add Overheads & Contractors 78.37 cum. 0.00000 1.00 sqm 0.00
Profit @13.615%
Rate per 1 Sqmt. Or say 78.40
14 Vibrated Reinforced Cement Concrete M 20 Design Mix ( by weigh batching ) using
20mm size (SS5) hard blasted granite machine crushed graded metal (Coarse aggregate)
from approved quarry, using a minimum quantity of 350 kgs. of cement per 1 cum of
concreteincluding cost and conveyance of all materials like cement, fine aggregate
(Sand), coarse aggregate, water etc., to site and cost of seigniorage charges on all materials
including Steel scaffolding Casurina Ballies, Bamboos, Wooden Reapers, Runners, Wood
Posts, Wall Plates etc.,, shuttering , machine mixing, laying concrete, vibrating,lift charges,
curing etc., complete but excluding cost of steel and it’s fabrication charges for finished
item of work for foundation, plinth, pedastals(below plinth)(APSS No. 402 & 403)

Material
Cement 350.00 kgs 4300.00 1000.00 kgs 1505.00

Page 162 of 222

 Coarse aggregate Graded Metal 0.80 cum. 1303.50 1.00 cum. 1042.80
20mm to 6mm

Coarse aggregate Sand 0.40 cum. 613.50 1.00 cum. 245.40

Water 1.20 KL 80.00 1.00 KL 96.00
Machinery
Batchingplant 0.5 cum 1.333 Hour 610.30 1.00 Hour 813.53
needle vibrator 40 mm (petrol) 1.333 Hour 209.10 1.00 Hour 278.73
Labour Allowence on crew 25% 758.34 1.00 189.59
charges
manpower
1st Class Mason 0.133 Nos. 625.00 1.00 Each 83.13
2nd Class Mason 0.267 Nos. 575.00 1.00 Each 153.53
Man Mazdoor 4.60 Nos. 525.00 1.00 Each 2415.00
Basic rate per Cum. Total 6822.70
a) VRCC M20 Grade Design mix for footings
Basic Rate per Cum. 1 cum. 6822.70 1.00 cum. 6822.70
Centering Charges per Cum. 1 cum. 919.00 1.00 cum. 919.00
Labour Allowence on centering 25% 631.00 157.75
labour charges
Add Overheads & Contractors 7899.45 cum. 0.00000 1.00 cum. 0.00
Profit @13.615%
Rate per cum. Say 7899.45

b) VRCC M20 Design mix for plinth beams

Basic Rate per Cum. 1 cum. 6822.70 1.00 cum. 6822.70
Centering Charges per Cum. 1 cum. 2911.00 1.00 cum. 2911.00
Labour Allowence on centering 25% 1521.00 380.25
labour charges
Add Overheads & Contractors 10113.95 cum. 0.00000 1.00 cum. 0.00
Profit @13.615%
Rate per cum. Say 10113.95

VRCC M20 Design mix for

c) pedestals

Basic Rate per Cum. 1 cum. 6822.70 1.00 cum. 6822.70

Centering Charges per Cum. 1 cum. 1332.00 1.00 cum. 1332.00
Labour Allowence on centering 25% 1004.00 251.00
labour charges
Add Overheads & Contractors 8405.70 cum. 0.00000 1.00 cum. 0.00
Profit @13.615%
Rate per cum. Say 8405.70

15 Vibrated Reinforced Cement Concrete M 20 Design Mix ( by weigh batching / Mixer )

using 20mm size (SS5) hard granite machine crushed graded metal (Coarse aggregate)
from approved quarry, using a minimum quantity of 350 kgs. of cement per 1 cum of
concreteincluding cost and conveyance of all materials like cement, fine aggregate
(Sand), coarse aggregate, water etc., to site and cost of seigniorage charges on all materials
including centering using Steel scaffolding Casurina Ballies, Bamboos, Wooden Reapers,
Runners, Wood Posts, Wall Plates etc.,.,., shuttering , machine mixing, laying concrete,
vibrating,lift charges, curing etc., complete but excluding cost of steel and it’s fabrication
charges for finished item of work (APSS No. 402 & 403) For coloumns , Lintels, Water
tanks, Rcc walls in building

Material
Coarse aggregate Graded Metal 0.80 cum. 1303.50 1.00 cum. 1042.80
20mm to 6mm

Page 163 of 222

 Coarse aggregate Sand 0.40 cum. 613.50 1.00 cum. 245.40
Cement 350.00 kgs 4300.00 1000.00 kgs 1505.00
Water 1.20 KL 80.00 1.00 KL 96.00
Machinery
Batchingplant 0.5 cum 1.333 Hour 610.30 1.00 Hour 813.53
needle vibrator 40 mm (petrol) 1.333 Hour 209.10 1.00 Hour 278.73
Labour Allowence on crew 25% 758.34 1.00 189.59
charges
manpower
1st Class Mason 0.167 Nos. 625.00 1.00 Each 104.38
2nd Class Mason 0.167 Nos. 575.00 1.00 Each 96.03
Man Mazdoor 5.60 Nos. 525.00 1.00 Each 2940.00
Basic rate per Cum. Total 7311.45

a) For Columns / RCC walls and Water tanks

Rate for other Floors GF FF SF TF 4th
Rate as worked out above per 7311.45 7311.45 7311.45 7311.45 7311.45
Cum.
Hire charges on centering material 238.00 238.00 238.00 238.00 238.00
Labour charges for centering 1757.00 1933.00 2108.00 2346.00 3175.00
Labour Allowence on centering 25% 439.25 483.25 527.00 586.50 793.75
labour charges
Lift charges @ 10% extra on each 314.04 628.08 942.12 1256.16
floor 9745.70 10279.74 10812.53 11424.07 12774.36
Add Overheads & Contractors 0.00000 0.00 0.00 0.00 0.00 0.00
Profit @13.615%
Rate per cum. Total 9745.70 10279.75 10812.55 11424.10 12774.40

b) For RCC Lintels

Rate for other Floors GF FF SF TF 4th
Rate as worked out above per 7311.45 7311.45 7311.45 7311.45 7311.45
Cum.
Hire charges on centering material 790.00 790.00 790.00 790.00 790.00
Labour charges for centering 1251.00 1376.00 1501.00 1626.00 2261.00
Labour Allowence on centering 25% 312.75 344.00 375.25 406.50 565.25
labour charges
Lift charges @ 10% extra on each 314.04 628.08 942.12 1256.16
floor 9665.20 10135.49 10605.78 11076.07 12183.86
Add Overheads & Contractors 0.00000 0.00 0.00 0.00 0.00 0.00
Profit @13.615%
Rate per cum. Total 9665.20 10135.50 10605.80 11076.10 12183.90

16 Vibrated Reinforced Cement Concrete M 20 Design Mix ( by weigh batching ) using

20mm size (SS5) hard blasted granite machine crushed graded metal (Coarse aggregate)
from approved quarry, using a minimum quantity of 350 kgs. of cement per 1 cum of
concrete including cost and conveyance of all materials like cement, fine aggregate
(Sand), coarse aggregate, water etc., to site and cost of seigniorage charges on all materials
including centering using Steel scaffolding Casurina Ballies, Bamboos, Wooden Reapers,
Runners, Wood Posts, Wall Plates etc.,., shuttering , machine mixing, laying concrete,
vibrating,lift charges, curing etc., complete but excluding cost of steel and it’s fabrication
charges for finished item of work (APSS No. 402 & 403) For beams and slabs

Material
Coarse aggregate Graded Metal 0.8 cum. 1303.50 1.00 cum. 1042.80
20mm to 6mm

Coarse aggregate Sand 0.4 cum. 613.50 1.00 cum. 245.40

Cement 350 kgs 4300.00 1000.00 kgs 1505.00
Water 1.2 KL 80.00 1.00 KL 96.00

Page 164 of 222

 Machinery
Batchingplant 0.5 cum 0.308 Hour 610.30 1.00 Hour 187.97
needle vibrator 40 mm (petrol) 0.308 Hour 209.10 1.00 Hour 64.40
Labour Allowence on crew 25% 175.22 1.00 43.81
charges
manpower
1st Class Mason 0.067 Nos. 625.00 1.00 Each 41.88
2nd Class Mason 0.133 Nos. 575.00 1.00 Each 76.48
Man Mazdoor 3.077 Nos. 525.00 1.00 Each 1615.43
Basic rate per Cum. Total 4919.16

a) For Roof Beams

Rate for other Floors GF FF SF TF 4th
Rate as worked out above per 4919.16 4919.16 4919.16 4919.16 4919.16
Cum.
Hire charges on centering material 1395.00 1395.00 1395.00 1395.00 1395.00
Labour charges for centering 1473.00 2093.00 1768.00 1915.00 2664.00
Labour Allowence on centering 25% 368.25 523.25 442.00 478.75 666.00
labour charges
Lift charges @ 10% extra on each 173.38 346.76 520.13 693.51
floor 8155.41 9103.79 8870.92 9228.04 10337.67
Add Overheads & Contractors 0.00000 0.00 0.00 0.00 0.00 0.00
Profit @13.615%

Rate per cum. Total 8155.45 9103.80 8870.95 9228.05 10337.70

b) VRCC M20 Design mix for Slabs 75mm thick

Cost of VRCC for 75 mm thick 0.075 cum. 4919.16 1.00 cum. 368.94
slab
Rate for other Floors GF FF SF TF 4th
Rate as worked out above per 368.94 368.94 368.94 368.94 368.94
Cum.
Hire charges on centering material 236.00 236.00 236.00 236.00 236.00

Labour charges for centering 226.00 249.00 271.00 294.00 316.00

Labour Allowence on centering 25% 56.50 62.25 67.75 73.50 79.00

labour charges
Lift charges @ 10% extra on each 13.00 26.01 39.01 52.01
floor 887.44 929.19 969.70 1011.45 1051.95
Add Overheads & Contractors 0.00000 0.00 0.00 0.00 0.00 0.00
Profit @13.615%
Rate per 1 Sqmts. Total 887.45 929.20 969.70 1011.45 1051.95

c) VRCC M20 Design mix for Slabs 100mm thick

Cost of VRCC for 100 mm thick 0.10 cum. 4919.16 1.00 cum. 491.92
slab
Rate for other Floors GF FF SF TF 4th
Rate as worked out above per 491.92 491.92 491.92 491.92 491.92
Cum.
Hire charges on centering material 158.00 158.00 158.00 158.00 158.00

Labour charges for centering 167.00 184.00 200.00 358.00 217.00

Labour Allowence on centering 25% 41.75 46.00 50.00 89.50 54.25
labour charges
Lift charges @ 10% extra on each 17.34 34.68 52.01 69.35
floor 858.67 897.26 934.60 1149.43 990.52
Add Overheads & Contractors 0.00000 0.00 0.00 0.00 0.00 0.00
Profit @13.615%
Page 165 of 222
 Rate per 1 Sqmts. Total 858.70 897.30 934.60 1149.45 990.55

d) VRCC M20 Design mix for Slabs of 110mm thick

Cost of VRCC for 110 mm thick 0.11 cum. 4919.16 1.00 cum. 541.11
slab
Rate for other Floors GF FF SF TF 4 th
Rate as worked out above per 541.11 541.11 541.11 541.11 541.11
Cum.
Hire charges on centering material 158.00 158.00 158.00 158.00 158.00

Labour charges for centering 167.00 184.00 200.00 358.00 217.00

Labour Allowence on centering 25% 41.75 46.00 50.00 89.50 54.25

labour charges
Lift charges @ 10% extra on each 19.07 38.14 57.21 76.29
floor
907.86 948.18 987.25 1203.82 1046.65
Add Overheads & Contractors 0.00000 0.00 0.00 0.00 0.00 0.00
Profit @13.615%
Rate per 1 Sqmts. Total 907.90 948.20 987.25 1203.85 1046.65

e) VRCC M20 Design mix for Slabs of 115mm thick

Cost of VRCC for 115 mm thick 0.115 cum. 4919.16 1.00 cum. 565.70
slab

Rate for other Floors GF FF SF TF 4th

Rate as worked out above per 565.70 565.70 565.70 565.70 565.70
Cum.
Hire charges on centering material 158.00 158.00 158.00 158.00 158.00

Labour charges for centering 167.00 184.00 200.00 358.00 217.00

Labour Allowence on centering 25% 41.75 46.00 50.00 89.50 54.25

labour charges
Lift charges @ 10% extra on each 19.94 39.88 59.82 79.75
floor
932.45 973.64 1013.58 1231.02 1074.70
Add Overheads & Contractors 0.00000 0.00 0.00 0.00 0.00 0.00
Profit @13.615%
Rate per 1 Sqmts. Total 932.50 973.65 1013.60 1231.05 1074.75

f) VRCC M20 Design mix for Slabs of 120mm thick

Cost of VRCC for 120 mm thick 0.12 cum. 4919.16 1.00 cum. 590.30
slab
Rate for other Floors GF FF SF TF 4th
Rate as worked out above per 590.30 590.30 590.30 590.30 590.30
Cum.
Hire charges on centering material 158.00 158.00 158.00 158.00 158.00

Labour charges for centering 167.00 184.00 200.00 358.00 217.00

Labour Allowence on centering 25% 41.75 46.00 50.00 89.50 54.25

labour charges

Page 166 of 222

 Lift charges @ 10% extra on each 20.81 41.61 62.42 83.22
floor 957.05 999.11 1039.91 1258.22 1102.77
Add Overheads & Contractors 0.00000 0.00 0.00 0.00 0.00 0.00
Profit @13.615%

Rate per 1 Sqmts. Total 957.05 999.15 1039.95 1258.25 1102.80

g) VRCC M20 for Slabs 125mm

thick
Cost of VRCC for 125 mm thick 0.125 cum. 4919.16 1.00 cum. 614.89
slab
Rate for other Floors GF FF SF TF 4th
Rate as worked out above per 614.89 614.89 614.89 614.89 614.89
Cum.
Hire charges on centering material 158.00 158.00 158.00 158.00 158.00

Labour charges for centering 167.00 184.00 200.00 358.00 217.00

Labour Allowence on centering 25% 41.75 46.00 50.00 89.50 54.25
labour charges

Lift charges @ 10% extra on each 21.67 43.34 65.02 86.69

floor

981.64 1024.56 1066.23 1285.41 1130.83

Add Overheads & Contractors 0.00000 0.00 0.00 0.00 0.00 0.00
Profit @13.615%
Rate per 1 Sqmts. Total 981.65 1024.60 1066.25 1285.45 1130.85

h) VRCC M20 for Slabs 140 mm

thick
Cost of VRCC for 140 mm thick 0.14 cum. 4919.16 1.00 cum. 688.68
slab

Rate for other Floors GF FF SF TF 4th

Rate as worked out above per 688.68 688.68 688.68 688.68 688.68
Cum.

Hire charges on centering material 158.00 158.00 158.00 158.00 158.00

Labour charges for centering 167.00 184.00 200.00 358.00 217.00

Labour Allowence on centering 25% 41.75 46.00 50.00 89.50 54.25
labour charges
Lift charges @ 10% extra on each 24.27 48.55 72.82 97.09
floor
1055.43 1100.95 1145.23 1367.00 1215.02
Add Overheads & Contractors 0.00000 0.00 0.00 0.00 0.00 0.00
Profit @13.615%

Rate per 1 Sqmts. Total 1055.45 1101.00 1145.25 1367.05 1215.05

i) VRCC M20 for Slabs 150 mm

thick
Cost of VRCC for 150 mm thick 0.15 cum. 4919.16 1.00 cum. 737.87
slab

Page 167 of 222

 Rate for other Floors GF FF SF TF 4th

Rate as worked out above per 737.87 737.87 737.87 737.87 737.87
Cum.

Hire charges on centering material 158.00 158.00 158.00 158.00 158.00

Labour charges for centering 167.00 184.00 200.00 358.00 217.00

Labour Allowence on centering 25% 41.75 46.00 50.00 89.50 54.25

labour charges
Lift charges @ 10% extra on each 26.01 52.01 78.02 104.03
floor
1104.62 1151.88 1197.88 1421.39 1271.15
Add Overheads & Contractors 0.00000 0.00 0.00 0.00 0.00 0.00
Profit @13.615%

Rate per 1 Sqmts. Total 1104.65 1151.90 1197.90 1421.40 1271.20

VRCC M20 for Slabs 165mm

j) thick
Cost of VRCC for 165 mm thick 0.165 cum. 4919.16 1.00 cum. 811.66
slab

Rate for other Floors GF FF SF TF 4th

Rate as worked out above per 811.66 811.66 811.66 811.66 811.66
Cum.
Hire charges on centering material 163.00 163.00 163.00 163.00 163.00

Labour charges for centering 172.00 189.00 206.00 224.00 241.00

Labour Allowence on centering 25% 43.00 47.25 51.50 56.00 60.25

labour charges

Lift charges @ 10% extra on each 28.61 57.21 85.82 114.43

floor

1189.66 1239.52 1289.37 1340.48 1390.34

Add Overheads & Contractors 0.00000 0.00 0.00 0.00 0.00 0.00
Profit @13.615%

Rate per 1 Sqmts. Total 1189.70 1239.55 1289.40 1340.50 1390.35

k) VRCC M20 for Slabs 175mm

thick
Cost of VRCC for 175 mm thick 0.175 cum. 4919.16 1.00 cum. 860.85
slab
Rate for other Floors GF FF SF TF 4th

Rate as worked out above per 860.85 860.85 860.85 860.85 860.85
Cum.
Hire charges on centering material 163.00 163.00 163.00 163.00 163.00

Page 168 of 222

 Labour charges for centering 172.00 189.00 206.00 224.00 241.00

Labour Allowence on centering 25% 43.00 47.25 51.50 56.00 60.25

labour charges

Lift charges @ 10% extra on each 30.34 60.68 91.02 121.36

floor

1238.85 1290.44 1342.03 1394.87 1446.46

Add Overheads & Contractors 0.00000 0.00 0.00 0.00 0.00 0.00
Profit @13.615%

Rate per 1 Sqmts. Total 1238.90 1290.45 1342.05 1394.90 1446.50

VRCC M20 for Slabs 180mm

l) thick

Cost of VRCC for 180 mm thick 0.18 cum. 4919.16 1.00 cum. 885.45
slab
Rate for other Floors GF FF SF TF 4th
Rate as worked out above per 885.45 885.45 885.45 885.45 885.45
Cum.
Hire charges on centering material 163.00 163.00 163.00 163.00 163.00

Labour charges for centering 172.00 189.00 206.00 224.00 241.00

Labour Allowence on centering 25% 43.00 47.25 51.50 56.00 60.25

labour charges

Lift charges @ 10% extra on each 31.21 62.42 93.62 124.83

floor
1263.45 1315.91 1368.37 1422.07 1474.53
Add Overheads & Contractors 0.00000 0.00 0.00 0.00 0.00 0.00
Profit @13.615%

Rate per 1 Sqmts. Total 1263.45 1315.95 1368.40 1422.10 1474.55

m) VRCC M20 for Slabs 200mm

thick
Cost of VRCC for 200 mm thick 0.2 cum. 4919.16 1.00 cum. 983.83
slab
Rate for other Floors GF FF SF TF 4th
Rate as worked out above per 983.83 983.83 983.83 983.83 983.83
Cum.
Hire charges on centering material 163.00 163.00 163.00 163.00 163.00

Labour charges for centering 172.00 189.00 206.00 224.00 241.00

Labour Allowence on centering 25% 43.00 47.25 51.50 56.00 60.25

labour charges
Lift charges @ 10% extra on each 34.68 69.35 104.03 138.70
floor 1361.83 1417.76 1473.68 1530.86 1586.78
Page 169 of 222
 Add Overheads & Contractors 0.00000 0.00 0.00 0.00 0.00 0.00
Profit @13.615%

Rate per 1 Sqmts. Total 1361.85 1417.80 1473.70 1530.90 1586.80

n) VRCC M20 for Slabs of 225

mm
Cost thick
of VRCC for 225 mm thick 0.225 cum. 4919.16 1.00 cum. 1106.81
slab

Rate for other Floors GF FF SF TF 4th

Rate as worked out above per 1106.81 1106.81 1106.81 1106.81 1106.81
Cum.

Hire charges on centering material 163.00 163.00 163.00 163.00 163.00

Labour charges for centering 172.00 189.00 206.00 224.00 241.00

Labour Allowence on centering 25% 43.00 47.25 51.50 56.00 60.25

labour charges
Lift charges @ 10% extra on each 39.01 78.02 117.03 156.04
floor

1484.81 1545.07 1605.33 1666.84 1727.10

Add Overheads & Contractors 0.00000 0.00 0.00 0.00 0.00 0.00
Profit @13.615%
Rate per 10 Sqmts. Total 1484.85 1545.10 1605.35 1666.85 1727.10

17 Reinforced Cement Concrete M 20 Design Mix ( by weigh batching ) using 20mm size
(SS5) hard blasted granite machine crushed graded metal (Coarse aggregate) from
approved quarry, using a minimum quantity of 350 kgs. of cement per 1 cum of concrete
including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse
aggregate, water etc., to site and cost of seigniorage charges on all materials including
centering using Steel scaffolding Casurina Ballies, Bamboos, Wooden Reapers, Runners,
Wood Posts, Wall Plates etc.,., shuttering , machine mixing, laying concrete, lift charges,
curing etc., complete but excluding cost of steel and it’s fabrication charges for finished
item of work (APSS No. 402 & 403)

Material
Coarse aggregate Graded Metal 0.8 cum. 1303.50 1.00 cum. 1042.80
20mm to 6mm

Coarse aggregate Sand 0.4 cum. 613.50 1.00 cum. 245.40

Cement 350 kgs 4300.00 1000.00 kgs 1505.00
Water 1.2 KL 80.00 1.00 KL 96.00
Machinery
Batchingplant 0.5 cum 1.333 Hour 610.30 1.00 Hour 813.53
LA on crew charges 25% 516.40 1.00 129.10
manpower
1st Class Mason 0.167 Nos. 625.00 1.00 Each 104.38
2nd Class Mason 0.167 Nos. 575.00 1.00 Each 96.03
Man Mazdoor 5.6 Nos. 525.00 1.00 Each 2940.00
Basic rate per Cum 6972.23
a) For Lintels
Page 170 of 222
 Rate for other Floors GF FF SF TF 4th
Rate as worked out above per 6972.23 6972.23 6972.23 6972.23 6972.23
Cum.
Hire charges on centering material 790.00 790.00 790.00 790.00 790.00
Labour charges for centering 1251.00 1376.00 1501.00 1626.00 1751.00
Labour Allowence on centering 25% 312.75 344.00 375.25 406.50 437.75
labour charges
Lift charges @ 10% extra on each 314.04 628.08 942.12 1256.16
floor 9325.98 9796.27 10266.56 10736.85 11207.14
Add Overheads & Contractors 0.00000 0.00 0.00 0.00 0.00 0.00
Profit @13.615%
Rate per Cum. Total 9326.00 9796.30 10266.60 10736.85 11207.15

18 Reinforced cement concrete with M 20 grade Design mix ( by weigh batching ) using
20mm size (SS 5) machine crushed hard blasted granite graded metal (coarse aggregate)
from approved quarry using a minimum quantity of 350 Kg of cement per 1 Cum of
concrete including cost and conveyance of all materials like cement, fine aggregate
(sand) ,coarse aggregate, water etc. to site and cost of seigniorage charges on all
materials including centering using Steel scaffoldingCasurina Ballies, Bamboos, Wooden
Reapers, Runners, Wood Posts, Wall Plates etc.,,, shuttering, machine mixing, laying
concrete, 7.5cm thick at fixed end and 5cm thick at free end with an average thickness
of 6.25cm including labour charges for mixing, laying, curing etc., complete but
excluding cost of steel and its fabrication charges for finished item of work (APSS No.
402 & 403)

for sun-shades of any width as per approved plan / Design and of average thickness of
62.50mm ( thickness at support 75mm and thickness at edge 50mm) (APSS No. 402, 403)

material
Coarse aggregate Graded Metal 0.8 cum. 1303.50 1.00 cum. 1042.80
20mm
Coarse to 6mm Sand
aggregate 0.4 cum. 613.50 1.00 cum. 245.40
Cement 350 kgs 4300.00 1000.00 kgs 1505.00
Water 1.2 KL 80.00 1.00 KL 96.00
Machinery
Batchingplant 0.5 cum 0.308 Hour 610.30 1.00 Hour 187.97
LA on crew charges 25% 119.32 1.00 29.83
manpower
1st Class Mason 0.067 Nos. 625.00 1.00 Each 41.88
2nd Class Mason 0.133 Nos. 575.00 1.00 Each 76.48
Man Mazdoor 3.077 Nos. 525.00 1.00 Each 1615.43
Basic rate per cum Total 4840.78

a) Chajja / Sunshade
Cost of RCC for 62.5 mm thick 0.0625 cum. 4840.78 1.00 cum. 302.55
sunshade
Rate for other Floors GF FF SF TF 4th
Rate as worked out above per 302.55 302.55 302.55 302.55 302.55
Cum.

Hire charges on centering material 156.00 156.00 156.00 156.00 156.00

Labour charges for centering 192.00 211.00 230.00 250.00 269.00

Labour Allowence on centering 25% 48.00 52.75 57.50 62.50 67.25

labour charges
Lift charges @ 10% extra on each 10.84 21.67 32.51 43.34
floor 698.55 733.14 767.72 803.56 838.14
Add Overheads & Contractors 0.00000 0.00 0.00 0.00 0.00 0.00
Profit @13.615% Page 171 of 222
 Rate per Sqmt. Total 698.55 733.15 767.75 803.60 838.15

b) for platforms of 75 mm thick

Cost of RCC for 75 mm thick 0.075 cum. 4840.78 1.00 cum. 363.06
platform
Rate for other Floors GF FF SF TF 4th
Rate as worked out above per 363.06 363.06 363.06 363.06 363.06
Cum.
Hire charges on centering material 233.00 233.00 233.00 233.00 233.00

Labour charges for centering 248.00 273.00 298.00 322.00 347.00

Labour Allowence on centering 25% 62.00 68.25 74.50 80.50 86.75
labour charges
Lift charges @ 10% extra on each 13.00 26.01 39.01 52.01
floor 906.06 950.31 994.57 1037.57 1081.82
Add Overheads & Contractors 0.00000 0.00 0.00 0.00 0.00 0.00
Profit @13.615%
Rate per Sqmt. Total 906.10 950.35 994.60 1037.60 1081.85

c) for platforms of 50 mm thick

Cost of RCC for 50 mm thick 0.05 cum. 4840.78 1.00 cum. 242.04
platform
Rate for other Floors GF FF SF TF 4th
Rate as worked out above per 242.04 242.04 242.04 242.04 242.04
Cum.
Hire charges on centering material 233.00 233.00 233.00 233.00 233.00

Labour charges for centering 248.00 273.00 298.00 322.00 347.00

Labour Allowence on centering 25% 62.00 68.25 74.50 80.50 86.75

labour charges
Lift charges @ 10% extra on each 8.67 17.34 26.01 34.68
floor 785.04 824.96 864.88 903.55 943.47
Add Overheads & Contractors 0.00000 0.00 0.00 0.00 0.00 0.00
Profit @13.615%
Rate per Sqmt. Total 785.05 825.00 864.90 903.55 943.50

d) for shelves of 32 mm thick

Cost of RCC for 32 mm thick 0.032 cum. 4840.78 1.00 cum. 154.90
shelves
Rate for other Floors GF FF SF TF 4th
Rate as worked out above per 154.90 154.90 154.90 154.90 154.90
Cum.
Hire charges on centering material 233.00 233.00 233.00 233.00 233.00
Labour charges for centering 248.00 273.00 298.00 322.00 347.00
Labour Allowence on centering 25% 62.00 68.25 74.50 80.50 86.75
labour charges
Lift charges @ 10% extra on each 5.55 11.10 16.64 22.19
floor 697.90 734.70 771.50 807.04 843.84
Add Overheads & Contractors 0.00000 0.00 0.00 0.00 0.00 0.00
Profit @13.615%
Rate per Sqmt. Total 697.95 734.75 771.55 807.05 843.85

e) for shelves of 25 mm thick

Cost of RCC for 25 mm thick 0.025 cum. 4840.78 1.00 cum. 121.02
shelves
Rate for other Floors GF FF SF TF 4th
Rate as worked out above per 121.02 121.02 121.02 121.02 121.02
Cum.
Hire charges on centering material 233.00 233.00 233.00 233.00 233.00

Page 172 of 222

 Labour charges for centering 248.00 273.00 298.00 322.00 347.00
Labour Allowence on centering 25% 62.00 68.25 74.50 80.50 86.75
labour charges
Lift charges @ 10% extra on each 4.33 8.67 13.00 17.34
floor 664.02 699.60 735.19 769.52 805.11
Add Overheads & Contractors 0.00000 0.00 0.00 0.00 0.00 0.00
Profit @13.615%
Rate per Sqmt. Total 664.05 699.60 735.20 769.55 805.15

19 Pointing to Cuddapah / Shahabad slabs in CM(1:3) Prop: including cost and

conveyance of all materials like cement, sand, water etc., to site, including seigniorage
charges, sales & other taxes on all materials, all operational, incidental charges and labour
charges such as mixing mortar, finishing, curing, etc., complete for finished item of work.
(APSS 901,906)
cost of cement for Cement Mortar 0.96 Kgs 4.30 1.00 Kgs 4.13
(1:3)
cost of sand for Cement Mortar 0.002 cum. 693.50 1.00 cum. 1.39
(1:3)
1st Class Mason 0.048 Nos. 625.00 1.00 Each 30.00
2nd Class Mason 0.112 Nos. 575.00 1.00 Each 64.40
Man mazdoor 0.05 Nos. 525.00 1.00 Each 26.25
Woman mazdoor 0.11 Nos. 525.00 1.00 Each 57.75
Add Overheads & Contractors 183.92 cum. 0.00000 1.00 cum. 0.00
Profit @13.615%

Rate per 1 Sqmt. Total 183.95

Pointing Without OH 183.92
20 Brick Masonry in Basement with CM (1:6) prop: using second class bricks from
approved source having minimum crushing strength of 40 Kg/Sqcm. including cost and
conveyance of all materials like cement, sand, bricks, water etc., to site, including
seigniorage charges, sales & other taxes on all materials, all operational, incidental and
labour charges such as mixing cement mortar, constructing masonry, scaffolding charges,
lift charges, curing, etc., complete for finished item of work. (APSS No. 501 & 504).

wall thickness 0.225

Material
Cement 48 kgs 4300.00 1000.00 kgs 206.40
Second class Bricks 512 Nos 6217.80 1000.00 Nos 3183.51
sand for mortor 0.2 cum. 693.50 1.00 cum. 138.70
B Labour
1st class mason 0.24 Nos. 625.00 1.00 Each 150.00
2nd class mason 0.56 Nos. 575.00 1.00 Each 322.00
Man Mazdoor 1.89 Nos. 525.00 1.00 Each 992.25
4992.86
Add Overheads & Contractors 679.78
Profit @13.615%
Basic Rate per Cum. 5672.64
21 Brick Masonry in superstructure with CM (1:8) prop: using second class bricks from
approved source having minimum crushing strength of 40 Kg/Sqcm. including cost and
conveyance of all materials like cement, sand, bricks, water etc., to site, including
seigniorage charges, sales & other taxes on all materials, all operational, incidental and
labour charges such as mixing cement mortar, constructing masonry, scaffolding charges,
lift charges, curing, etc., complete for finished item of work. (APSS No. 501 & 504).

wall thickness 0.225

Material
Cement 36 kgs 4300.00 1000.00 kgs 154.80
Second class Bricks 512 Nos 6217.80 1000.00 Nos 3183.51
Page 173 of 222
 sand for mortor 0.2 cum. 693.50 1.00 cum. 138.70
B Labour
1st class mason 0.24 Nos. 625.00 1.00 Each 150.00
2nd class mason 0.56 Nos. 575.00 1.00 Each 322.00
Man Mazdoor 1.89 Nos. 525.00 1.00 Each 992.25
Basic Rate per Cum. 4941.26

Rate for other Floors GF FF SF TF 4th

Basic rate per Cum 4941.26 4941.26 4941.26 4941.26 4941.26
Hire charges of stage scafflding
per cum 45.87 45.87 45.87 45.87 45.87
Labour charges for stage
scaffolding per cum 353.16 505.69 658.18 810.71 963.20

Labour Allowence on 25% 88.29 126.42 164.55 202.68 240.80

scaffolding
Lift charges @ 10% extra on each 146.43
292.85 439.28 585.70
floor
5428.58 5765.67 6102.71 6439.80 6776.83
Add Overheads & Contractors 0.00
0.00000 0.00 0.00 0.00 0.00
Profit @13.615%
Rate per Cum. Total 5428.60 5765.70 6102.75 6439.85 6776.85

22 Reinforced Brick Masonary walls of 11.5cm in CM(1:6) using 2nd bricks having a
crushing strength of not less than 35.00kg/cm2 and using two mild steel bars of 6m dia in
every third layer of brick masory, with free joints of the main block work including cost
and seignorage charges and conveyance of all materials and water from approved sources
to work site and all operational, incidental, labour charges such as scaffolding mixing
mortor constructing masonary lift charges, curing etc. complete but excluding the cost of
steel and its fabrication charges for finished item of work as per SS 509

wall thickness 0.115

Material
Second class Bricks 51.2 Nos 6217.80 1000.00 Nos 318.35
C.M.(1:6) 0.02 cum. 693.50 1.00 cum. 13.87
B Labour
1st class mason 0.06 Nos. 625.00 1.00 Each 37.50
2nd class mason 0.06 Nos. 575.00 1.00 Each 34.50
Mazdoor (unskilled) 0.275 Nos. 525.00 1.00 Each 144.38
Basic Rate per One Sqmt. 216.38 548.60

Rate for other Floors GF FF SF TF 4th

Basic rate per sqm 548.60 548.60 548.60 548.60 548.60
Hire charges of stage scafflding 10.32 10.32 10.32 10.32 10.32
per cum

Labour charges for stage 79.46 113.78 148.09 182.41 216.72

scaffolding per cum
Labour Allowence on scaffolding 25% 19.87 0.00 37.02 45.60 54.18
Lift charges @ 10% extra on each 21.64 43.28 64.91 86.55
floor 658.25 694.33 787.30 851.84 916.37
Add Overheads & Contractors 0.00000 0.00 0.00 0.00 0.00 0.00
Profit @13.615%
Rate per One Sqmt. Total 658.25 694.35 787.35 851.85 916.40

Page 174 of 222

23 Reinforced Brick Masonry 11.5cm (4 1/2") thick for partition walls in CM (1:4) prop:
using second class bricks from approved source having minimum crushing strength of 40
Kg/Sqcm. and placing 2nos. of 6mm dia MS bars embedded in every 3rd layer with free
ends of reinforcement keyed into mortar joints of the main brick work whereever
applicable including cost and conveyance of all materials like cement, sand, bricks, water
etc., to site, seigniorage charges, sales & other taxes on all materials, all operational,
incidental and labour charges such as mixing cement mortar, constructing masonry,
scaffolding charges, lift charges, curing, etc., but excluding cost and conveyance of steel
and its fabrication charges complete for finished item of work. (APSS No. 501 & 509).

wall thickness 0.115

Material
Cement 7.2 kgs 4300.00 1000.00 kgs 30.96
Second class Bricks 51.2 Nos 6217.80 1000.00 Nos 318.35
sand for mortor 0.02 cum. 693.50 1.00 cum. 13.87
B Labour
1st class mason 0.06 Nos. 625.00 1.00 Each 37.50
2nd class mason 0.06 Nos. 575.00 1.00 Each 34.50
Man Mazdoor 0.275 Nos. 525.00 1.00 Each 144.38
Basic Rate per One Sqmt. 579.56

Rate for other Floors GF FF SF TF 4th

Basic rate per sqm 579.56 579.56 579.56 579.56 579.56

Hire charges of stage scafflding 10.32 10.32 10.32 10.32 10.32

per cum

Labour charges for stage 79.46 113.78 148.09 182.41 216.72

scaffolding per cum

Labour Allowence on scaffolding 25% 19.87 28.45 37.02 45.60 54.18

Lift charges @ 10% extra on each 21.64 43.28 64.91 86.55

floor

689.21 753.75 818.27 882.80 947.33

Add Overheads & Contractors 0.00000 0.00 0.00 0.00 0.00 0.00
Profit @13.615%
Rate per One Sqmt. Total 689.25 753.75 818.30 882.80 947.35
24 Brick Masonry in superstructure with CM (1:8) prop: using Fly ASH Bricks of size
290x225x140mm with compressive of 50 Kgs / Sqcm from approved source including cost
and conveyance of all materials like cement, sand, fly ash bricks, water etc., to site,
including seigniorage charges, sales & other taxes on all materials, all operational,
incidental and labour charges such as mixing cement mortar, constructing masonry,
scaffolding charges, lift charges, curing, etc., complete for finished item of work. (APSS
No. 501 & 504).

Wall thickness 0.225

Material
Fly Ash Bricks 290x225x140mm 110 Nos 24217.80 1000.00 Nos 2663.96
Cement for Cement Mortar (1:8) 18 Kgs 4.30 1.00 Kgs 77.40
Sand for Cement Mortar (1:8) 0.1 cum. 693.50 1.00 cum. 69.35
Labour
1st class mason 0.42 cum. 625.00 1.00 cum. 262.50
2nd class mason 0.92 Nos. 575.00 1.00 Each 529.00

Page 175 of 222

 Man Mazdoor 0.7 Nos. 525.00 1.00 Each 367.50
Woman Mazdoor 2.1 Nos. 525.00 1.00 Each 1102.50
Basic Rate per Cum. 5072.21

Rate for other Floors GF FF SF TF 4th

Basic rate per Cum 5072.21 5072.21 5072.21 5072.21 5072.21
Hire charges of stage scafflding 45.87 45.87 45.87 45.87 45.87
per cum charges
Labour for stage 353.16 505.69 658.18 810.71 963.20
scaffolding per cum
Labour Allowence on scaffolding 25% 88.29 126.42 164.55 202.68 240.80
Lift charges @ 10% extra on each 226.15 452.30 678.45 904.60
floor 5559.53 5976.34 6393.11 6809.92 7226.68
Add Overheads & Contractors 0.00000 0.00 0.00 0.00 0.00 0.00
Profit @13.615%
Rate per Cum. Total 5559.55 5976.35 6393.15 6809.95 7226.70

25 Brick Masonry in Basement with CM (1:6) prop: using Fly ASH Bricks of size
290x225x140mm with compressive of 50 Kgs / Sqcm from approved source including cost
and conveyance of all materials like cement, sand, fly ash bricks, water etc., to site,
including seigniorage charges, sales & other taxes on all materials, all operational,
incidental and labour charges such as mixing cement mortar, constructing masonry,
scaffolding charges, lift charges, curing, etc., complete for finished item of work. for
basement (APSS No. 501 & 504).
Wall thickness 0.225
Material
Fly Ash Bricks 290x225x140mm 110 Nos 24217.80 1000.00 Nos 2663.96
Cement for Cement Mortar (1:8) 24 Kgs 4.30 1.00 Kgs 103.20
Sand for Cement Mortar (1:8) 0.1 cum. 693.50 1.00 cum. 69.35
Labour
1st class mason 0.42 cum. 625.00 1.00 cum. 262.50
2nd class mason 0.92 Nos. 575.00 1.00 Each 529.00
Man Mazdoor 0.7 Nos. 525.00 1.00 Each 367.50
Woman Mazdoor 2.1 Nos. 525.00 1.00 Each 1102.50
total 5098.01
Add Overheads & Contractors 0.00000 0.00
Profit @13.615%
Basic Rate per Cum. 5098.05

26 Brick Masonry in superstructure with CM (1:8) prop: using Fly ASH Bricks of size
290x200x140mm with compressive of 50 Kgs / Sqcm from approved source including cost
and conveyance of all materials like cement, sand, fly ash bricks, water etc., to site,
including seigniorage charges, sales & other taxes on all materials, all operational,
incidental and labour charges such as mixing cement mortar, constructing masonry,
scaffolding charges, lift charges, curing, etc., complete for finished item of work. (APSS
No. 501 & 504).
Wall thickness 0.225
Material
Fly Ash Bricks 290x200x140mm 123 Nos 20217.80 1000.00 Nos 2486.79
Cement for Cement Mortar (1:8) 18 Kgs 4.30 1.00 Kgs 77.40
Sand for Cement Mortar (1:8) 0.1 cum. 693.50 1.00 cum. 69.35
Labour
1st class mason 0.42 cum. 625.00 1.00 cum. 262.50
2nd class mason 0.92 Nos. 575.00 1.00 Each 529.00
Man Mazdoor 0.7 Nos. 525.00 1.00 Each 367.50
Woman Mazdoor 2.1 Nos. 525.00 1.00 Each 1102.50
Basic Rate per Cum. 4895.04

Page 176 of 222

 Rate for other Floors GF FF SF TF 4th
Basic rate per Cum 5072.21 5072.21 5072.21 5072.21 5072.21
Hire charges of stage scafflding 45.87 45.87 45.87 45.87 45.87
per cum charges
Labour for stage 353.16 505.69 658.18 810.71 963.20
scaffolding per cum
Labour Allowence on scaffolding 25% 88.29 126.42 164.55 202.68 240.80
Lift charges @ 10% extra on each 226.15 452.30 678.45 904.60
floor 5559.53 5976.34 6393.11 6809.92 7226.68
Basic rate per Cum 0.00000 0.00 0.00 0.00 0.00 0.00
Rate per Cum. Total 5559.55 5976.35 6393.15 6809.95 7226.70

27 Brick Masonry in Basement with CM (1:6) prop: using Fly ASH Bricks of size
290x200x140mm with compressive of 50 Kgs / Sqcm from approved source including cost
and conveyance of all materials like cement, sand, fly ash bricks, water etc., to site,
including seigniorage charges, sales & other taxes on all materials, all operational,
incidental and labour charges such as mixing cement mortar, constructing masonry,
scaffolding charges, lift charges, curing, etc., complete for finished item of work. for
basement (APSS No. 501 & 504).
Wall thickness 0.2
Material
Fly Ash Bricks 290x225x140mm 123 Nos 20217.80 1000.00 Nos 2486.79
Cement for Cement Mortar (1:8) 24 Kgs 4.30 1.00 Kgs 103.20
Sand for Cement Mortar (1:8) 0.1 cum. 693.50 1.00 cum. 69.35
Labour
1st class mason 0.42 cum. 625.00 1.00 cum. 262.50
2nd class mason 0.92 Nos. 575.00 1.00 Each 529.00
Man Mazdoor 0.7 Nos. 525.00 1.00 Each 367.50
Woman Mazdoor 2.1 Nos. 525.00 1.00 Each 1102.50
total 4920.84
Basic rate per Cum 0.00000 0.00
Basic Rate per Cum. 4920.85

28 Reinforced Fly Ash Brick Masonry 10cm thick for partition walls in CM (1:4) prop: Fly
Bricks of size 290x100x140mm with compressive of 50 Kgs / Sqcm from approved source
and placing 2nos. of 6mm dia MS bars embedded in every 3rd layer with free ends of
reinforcement keyed into mortar joints of the main brick work whereever applicable
including cost and conveyance of all materials like cement, sand, bricks, water etc., to site,
seigniorage charges, sales & other taxes on all materials, all operational, incidental and
labour charges such as mixing cement mortar, constructing masonry, scaffolding charges,
lift charges, curing, etc., but excluding cost and conveyance of steel and its fabrication
charges complete for finished item of work. (APSS No. 501 & 509).

Material
Fly Ash Bricks 290x100x140mm 24 Nos 11217.80 1000.00 Nos 269.23
Cement for Cement Mortar (1:4) 7.2 Kgs 4.30 1.00 Kgs 30.96
Sand for Cement Mortar (1:4) 0.02 cum. 693.50 1.00 cum. 13.87
Labour
1st class mason 0.06 cum. 625.00 1.00 cum. 37.50
2nd class mason 0.06 Nos. 575.00 1.00 Each 34.50
Man Mazdoor 0.275 Nos. 525.00 1.00 Each 144.38
Basic Rate per One Sqmt. 530.43

Rate for other Floors GF FF SF TF 4th

Basic rate per sqm 530.43 530.43 530.43 530.43 530.43

Page 177 of 222

 Hire charges of stage scafflding 10.32 10.32 10.32 10.32 10.32
per cum charges
Labour for stage 79.46 113.78 148.09 182.41 216.72
scaffolding per cum
Labour Allowence on scaffolding 25% 19.87 28.45 37.02 45.60 54.18
Lift charges @ 10% extra on each 21.64 43.28 64.91 86.55
floor 640.08 704.62 769.14 833.67 898.20
Add Overheads & Contractors 0.00000 0.00 0.00 0.00 0.00 0.00
Profit @13.615%
Rate per One Sqmt. Total 640.10 704.65 769.15 833.70 898.25

29 Providing High Yield Strength Deformed (HYSD) steel bars (Fe 415 grade as per IS 1786-
1985) of 8mm to 40mm diameters, cutting, bending, to required sizes and shapes placing in
position with cover blocks of approved size and binding wire of 20SWG, forming grills for
reinforcement work as per approved Designs and drawings including cost and conveyance
of bars from approved sources to site of work, including cost and conveyance of binding
wire, cover blocks, chairs, overlaps, spacers, dowels, wastage etc., and all operational,
incidental, and labour charges such as cutting, bending, placing in position, tying etc., and
sales & other taxes,on cost of all materials complete for finished item of work (APSS
No.126) in all floors.

Material
Cost of steel including 5% 1.05 MT 36598.50 1.00 MT 38428.43
wastage and overlaps
cost of binding wire 6 Kg 55.00 1.00 Kg 330.00
Labour
Blacksmith/Tin Smith/Bar bender 3 Nos 625.00 1.00 Nos 1875.00
I st class

Blacksmith/Tin Smith/Bar bender 7 Nos 495.00 1.00 Nos 3465.00

II st class

Light mazdoor 10 Nos 525.00 1.00 Nos 5250.00

Rate per MT Total 49348.43

Rate for other Floors GF FF SF TF 4th

Basic rate per MT 49348.43 49348.43 49348.43 49348.43 49348.43
Lift Charges per MT @10% extra 1059.00 2118.00 3177.00 4236.00
on labour per floor 49348.43 50407.43 51466.43 52525.43 53584.43
Add Overheads & Contractors 0.00000 0.00 0.00 0.00 0.00 0.00
Profit @13.615%
Rate per One MT Total 49348.45 50407.45 51466.45 52525.45 53584.45

30 Providing Mild Steel Bars (Fe 250 grade as per IS 432) of 6mm diameter, cutting, bending,
to required sizes and shapes placing in position with cover blocks of approved size and
binding wire of 20SWG, forming grills for reinforcement work as per approved Designs
and drawings including cost and conveyance of bars from approved sources to site of work,
including cost and conveyance of binding wire, cover blocks, chairs, overlaps, spacers,
dowels, wastage etc., and all operational, incidental, and labour charges such as cutting,
bending, placing in position, tying etc., and sales & other taxes,on cost of all materials
complete for finished item of work (APSS No.126) in all floors.

Material
Cost of Mild steel 1.05 MT 38598.50 1.00 MT 40528.43
cost of binding wire 6 Kg 55.00 1.00 Kg 330.00
Labour
Blacksmith/Tin Smith/Bar bender 3 Nos 781.25 1.00 Nos 2343.75
I st class
Blacksmith/Tin Smith/Bar bender 7 Nos 495.00 1.00 Nos 3465.00
II st class
Light mazdoor 10 Nos 525.00 1.00 Nos 5250.00
Page 178 of 222
 Rate per MT Total 51917.18

Rate for other Floors GF FF SF TF 4th

Basic rate per MT 51917.18 51917.18 51917.18 51917.18 51917.18
Lift Charges per MT @10% extra 1105.88 2211.75 3317.63 4423.50
on labour per floor
51917.18 53023.06 54128.93 55234.81 56340.68
Add Overheads & Contractors 0.00000 0.00 0.00 0.00 0.00 0.00
Profit @13.615%
Rate per One MT Total 51917.20 53023.10 54128.95 55234.85 56340.70

31 Ornamental Plastering 12mm thick in two coats with base coat of 8mm thick in CM (1:5)
and top coat of 4mm thick in CM (1:3) dubara sponge finish including cost and conveyance
of all materials like cement, sand, water etc., to site, seigniorage charges, sales & other
taxes on all materials,all operational, incidental and labour charges such as mixing mortar,
scaffolding charges, lift charges, including cutting of Grooves wherever necessary as
directed by Engineer - in - charge, finishing, curing, etc., complete for Even Surfaces of
Wall for finished item of work. (APSS 901,903 & 904)

Material
Base coat 8mm thick in C.M.
(1:5)
Cement 3.17 kgs 4300.00 1000.00 kgs 13.63
Sand for mortor 0.011 cum. 693.50 1.00 cum. 7.63
Top Coat 4mm thick in C.M.
(1:3)
Cement 1.92 kgs 4300.00 1000.00 kgs 8.26
Sand for mortor 0.004 cum. 693.50 1.00 cum. 2.77
Labour
1st Class Mason 0.063 Nos. 625.00 1.00 Each 39.38
2nd Class Mason 0.147 Nos. 575.00 1.00 Each 84.53
Light mazdoor 0.39 Nos. 525.00 1.00 Each 204.75
Basic rate per 1 Sqmt. 360.94

Rate for other Floors GF FF SF TF 4th

Basic rate per 1 Sqmt. 360.94 360.94 360.94 360.94 360.94
Hire charges of stage scafflding 2.46 2.46 2.46 2.46 2.46
per sqm
Labour charges for stage 15.91 22.57 29.23 35.90 42.56
scaffolding per sqm
Labour Allowence on scaffolding 25% 3.98 5.64 7.31 8.98 10.64

Lift charges @ 10% extra on 32.87 65.73 98.60 131.46

labour each floor 383.29 424.48 465.67 506.88 548.06
Add Overheads & Contractors 0.00000 0.00 0.00 0.00 0.00 0.00
Profit @13.615%
Rate per 1 Sqmt. Total 383.29 424.48 465.67 506.88 548.06
32 Plastering 12mm thick in two coats with base coat of 8mm thick in CM (1:6) and top coat
of 4mm thick in CM (1:4) dubara sponge finish including cost and conveyance of all
materials like cement, sand, water etc., to site, seigniorage charges, sales & other taxes on
all materials,all operational, incidental and labour charges such as mixing mortar,
scaffolding charges, lift charges, including cutting of Grooves wherever necessary as
directed by Engineer - in - charge, finishing, curing, etc., complete for Even Surfaces of
Wall for finished item of work. (APSS 901,903 & 904)

Material
Base coat 8mm thick in C.M.
(1:6)
Cement 2.64 kgs 4300.00 1000.00 kgs 11.35

Page 179 of 222

 cost of sand for mortor 0.011 cum. 693.50 1.00 cum. 7.63
Top Coat 4mm thick in C.M.
(1:4)
Cement 1.44 kgs 4300.00 1000.00 kgs 6.19
Sand for mortor 0.004 cum. 693.50 1.00 cum. 2.77
Labour
1st Class Mason 0.063 Nos. 625.00 1.00 Each 39.38
2nd Class Mason 0.147 Nos. 575.00 1.00 Each 84.53
Light mazdoor 0.39 Nos. 525.00 1.00 Each 204.75
Basic rate per 1 Sqmt. 356.60

Rate for other Floors GF FF SF TF 4th

Basic rate per 1 Sqmt. 356.60 356.60 356.60 356.60 356.60
Hire charges of access scafflding 1.03 1.03 1.03 1.03 1.03
pers qm charges for access
Labour 7.95 11.38 14.81 18.24 21.67
scaffolding per sqmon scaffolding
Labour Allowence 25% 1.99 2.85 3.70 4.56 5.42
Lift charges @ 10% extra on each 32.87 65.73 98.60 131.46
floor 367.57 404.73 441.87 479.03 516.18
Add Overheads & Contractors 0.00000 0.00 0.00 0.00 0.00 0.00
Profit @13.615%
Rate per 1 Sqmt. Total 367.60 404.75 441.90 479.05 516.20

33 Plastering 20mm thick in two coats with base coat of 16mm thick in CM (1:6) and top
coat of 4mm thick in CM (1:4) dubara sponge finish including cost and conveyance of
all materials like cement, sand, water etc., to site, seigniorage charges, sales & other taxes
on all materials, all operational, incidental and labour charges such as mixing
mortar,scaffolding charges, lift charges, finishing,including cutting of Grooves wherever
necessary as directed by Engineer - in - charge, curing, etc., complete for Uneven
Surfaces of Brick Wall for finished item of work. (APSS 901,903 & 904)

Base coat 16 mm thick in C.M.

(1:6)
Cement 4.32 kgs 4300.00 1000.00 kgs 18.58

cost of sand for mortor 0.018 cum. 693.50 1.00 cum. 12.48

Top Coat 4mm thick in C.M.

(1:4)
Cement 1.44 kgs 4300.00 1000.00 kgs 6.19
Sand for mortor 0.004 cum. 693.50 1.00 cum. 2.77
Labour
1st Class Mason 0.063 Nos. 625.00 1.00 Each 39.38
2nd Class Mason 0.147 Nos. 575.00 1.00 Each 84.53
Light mazdoor 0.39 Nos. 525.00 1.00 Each 204.75
Basic rate per 1 Sqmt. 368.68

Rate for other Floors GF FF SF TF 4th

Basic rate per 1 Sqmt. 368.68 368.68 368.68 368.68 368.68
Hire charges of access scafflding 1.03 1.03 1.03 1.03 1.03
pers qm
Labour charges for access 7.95 11.38 14.81 18.24 21.67
scaffolding per sqm
Labour Allowence on scaffolding 25% 1.99 2.85 3.70 4.56 5.42

Lift charges @ 10% extra on each 32.87 65.73 98.60 131.46

floor
379.65 416.81 453.95 491.11 528.26

Page 180 of 222

 Add Overheads & Contractors 0.00000 0.00 0.00 0.00 0.00 0.00
Profit @13.615%

Rate per 1 Sqmt. Total 379.65 416.85 453.95 491.15 528.30

34 Ornamental Plastering with CM(1:4) Prop: 12mm thick in single coat including cost and
conveyance of all materials like cement, sand, water etc., to site, including seigniorage charges, sales &
other taxes on all materials, all operational, incidental charges and labour charges such as mixing
mortar, finishing, curing, etc., complete for finished item of work. (APSS 901,906)

Cement Mortar (1:4) 0.015 cum. 2381.18 1.00 cum. 35.72

1st Class Mason 0.045 Nos. 625.00 1.00 Each 28.13
2nd Class Mason 0.105 Nos. 575.00 1.00 Each 60.38
Man mazdoor 0.28 Nos. 525.00 1.00 Each 147.00
Rate per 1 Sqmt. Total 271.25
Rate for other Floors GF FF SF TF 4th
Basic rate per 1 Sqmt. 271.25 271.25 271.25 271.25 271.25
Hire charges of access scafflding 2.46 1.03 1.03 1.03 1.03
pers qm
Labour charges for access 15.91 22.57 29.23 35.90 42.56
scaffolding per sqm
Labour Allowence on scaffolding 25% 3.98 5.64 7.31 8.98 10.64

Lift charges @ 10% extra on each 23.55 47.10 70.65 94.20

floor
293.60 324.04 355.92 387.81 419.68
Add Overheads & Contractors 0.00000 0.00 0.00 0.00 0.00 0.00
Profit @13.615%

Rate per 1 Sqmt. Total 293.60 324.05 355.95 387.85 419.70

35 Plastering with CM(1:4) Prop: 20mm thick in single coat including cost and conveyance of all
materials like cement, sand, water etc., to site, including seigniorage charges, sales & other taxes on all
materials, all operational, incidental charges and labour charges such as mixing mortar, finishing,
curing, etc., complete for finished item of work. (APSS 901,906)

COST of Cement Mortar (1:4) 0.021 cum. 2381.18 1.00 cum. 50.00

1st Class Mason 0.045 Nos. 625.00 1.00 Each 28.13

2nd Class Mason 0.105 Nos. 575.00 1.00 Each 60.38
Man mazdoor 0.28 Nos. 525.00 1.00 Each 147.00
Rate per 1 Sqmt. Total 285.55
Rate for other Floors GF FF SF TF 4th
Basic rate per 1 Sqmt. 285.55 285.55 285.55 285.55 285.55
Hire charges of access scafflding 1.03 1.03 1.03 1.03 1.03
pers qm
Labour charges for access 7.95 11.38 14.81 18.24 21.67
scaffolding per sqm
Labour Allowence on scaffolding 25% 1.99 2.85 3.70 4.56 5.42

Lift charges @ 10% extra on each 23.55 47.10 70.65 94.20

floor
296.52 324.36 352.19 380.03 407.87
Add Overheads & Contractors 0.00000 0.00 0.00 0.00 0.00 0.00
Profit @13.615%

Page 181 of 222

 Rate per 1 Sqmt. Total 296.55 324.40 352.20 380.05 407.90

36 Providing impervious coat over RCC roof slab to required slopes with CM (1:3) prop.
20mm thick (average) mixed with Two component sysem High durable cementitious
acrylic based waterproofing systems : Complies with ASTM Dcompound manufactured by
reputed manufacturers as approved by Engineer-in-charge at 1Kg/bag of cement, laid over
roof slab when it is green, finished smooth with a floating coat of neat cement and thread
lining at regular intervals of 45cmx45cm including cost and conveyance of all materials
like cement, sand, water proofing compound, water etc., to site, seigniorage charges, sales
& other taxes on all materials, all operational, incidental and labour charges such as mixing
mortar, laying, rounding off at junctions of wall and slab, rendering smooth with thread
lining, curing, lift charges, etc., complete for finished item of work (APSS No. 901 &
903).
Cement Mortar (1:3) 10.08 kg 4.30 1.00 kg 43.34
sand for Cement Mortar (1:3) 0.021 cum. 693.50 1.00 cum. 14.56

Two component sysem High 0.2 Kgs 67.00 1.00 Kgs 13.40
durable cementitious acrylic based
waterproofing systems

1st Class Mason 0.066 Nos. 625.00 1.00 Each 41.25

2nd Class Mason 0.154 Nos. 575.00 1.00 Each 88.55
Man Mazdoor 0.37 Nos. 525.00 1.00 Each 194.25
Basic rate per 1 Sqmt. 395.36
Rate for other Floors GF FF SF TF 4th
Basic rate per 1 Sqmt. 395.36 395.36 395.36 395.36 395.36
Lift charges @ 10% extra on each 32.41 64.81 97.22 129.62
floor
395.36 427.77 460.17 492.58 524.98
Add Overheads & Contractors 0.00000 0.00 0.00 0.00 0.00 0.00
Profit @13.615%

Rate per 1 Sqmt. Say 395.40 427.80 460.20 492.60 525.00

set over a base coat of CM (1:8),
Flooring with
12mm thick (joints of stone must
be flushed) over C.C. bed already
laid or R.C.C. roof slab only after
it is properly cured, cleaned,
moistered and where necessary
treated with neat grey cement
slurry of honey like consistency
spred at3.3 kgs of cement for 1
sqm. and jointed with neat cement
paste to full depth, including cost
and conveyance of all materials
like cement, sand, water, flooring
stones etc. to site, seigniorage
charges, sales and other taxes on
all materials, all operational,
incidental and labour charges such
as dressing of flooring stones to
the required sizes, mixing of
cement mortar, laying, jointing,
curing, lift charges etc., complete
for finished item of work.(APSS
No.703 & 701)

Page 182 of 222

37 Flooring with Supply of Double charged / multi charged stain free full body
porcelain vitrified tiles with double layer pigment of size 600
x 600 mm and thickness between 8-10 mm 1st quality
conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of
any colour and finish in all shades and designs stone must be flushed) over C.C. bed
already laid or R.C.C. roof slab only after it is properly cured, cleaned, moistered and
where necessary treated with neat grey cement slurry of honey like consistency spred at3.3
kgs of cement for 1 sqm. and jointed with neat cement paste to full depth, including cost
and conveyance of all materials like cement, sand, water, flooring stones etc. to site,
seigniorage charges, sales and other taxes on all materials, all operational, incidental and
labour charges such as dressing of flooring stones to the required sizes, mixing of cement
mortar, laying, jointing, curing, lift charges etc., complete for finished item of work.(APSS
No.703 & 701)

Material
Soluble salt porcelain vitrified 1.05 Sqmt. 644.00 1.00 Sqmt. 676.20
tiles BMT-C.09
Sand 0.012 cum 693.50 1.00 cum 8.32
Cement 2.16 Kgs 4300.00 1000.00 Kgs 9.29
Grey Cement for slurry 3.3 Kgs 4300.00 1000.00 Kgs 14.19
Cement for pointing 0.6 Kgs 4300.00 1000.00 Kgs 2.58
Labour
1st Class Mason 0.096 Nos. 625.00 1.00 Each 60.00
2nd Class Mason 0.224 Nos. 575.00 1.00 Each 128.80
Man Mazdoor 0.33 Nos. 525.00 1.00 Each 173.25
Add water charges @1% on 1% 362.05 3.62
labour
Basic rate per 1 Sqmt. 1076.25
Rate for other Floors GF FF SF TF 4th
Basic rate per 1 Sqmt. 1076.25 1076.25 1076.25 1076.25 1076.25
Lift charges @ 10% extra on each 36.21 72.41 108.62 144.82
floor 1076.25 1112.46 1148.66 1184.87 1221.07
Add Overheads & Contractors 0.00000 0.00 0.00 0.00 0.00 0.00
Profit @13.615%
Rate per Sqmt. 1076.30 1112.50 1148.70 1184.90 1221.10

38 Providing Skirting with Double charged / multi charged stain free full body
porcelain vitrified tiles of size 600 x 600 mm and thickness between 8-10 mm 1st quality
of any size of brand as approved by Engineer - in - charge and set over a base coat of CM
(1:5), 12mm thick and neat cement paste at the rate of 3.3 Kg/Sqmt. and jointed with white
cement paste mixed with pigment of matching shade including cost and conveyance of all
materials like cement, sand, water, tiles, etc. to site, seigniorage charges, sales and other
taxes on all materials such as mixing of cement mortar, laying in position, curing, lift
charges etc., complete for finished item of work (APSS No.701 & 707) in All Floors

Soluble salt porcelain vitrified 1.05 Sqmt 644.00 1.00 Sqmt 676.20
tiles BMT-C.09
Grey cement Slurry 0.33 Kgs 4300.00 1000.00 Kgs 1.42
White cement 0.20 Kgs 27.00 1.00 Kgs 5.40
Cement for Cement Mortar CM 3.45 Kgs 4300.00 1000.00 Kgs 14.84
(1:5)
Sand Mortar CM (1:5) 0.012 Cum 693.50 1.00 Cum 8.32
Labour
1st Class Mason 0.096 Nos. 625.00 1.00 Each 60.00
2nd Class Mason 0.224 Nos. 575.00 1.00 Each 128.80
Man Mazdoor 0.33 Nos. 525.00 1.00 Each 173.25
Page 183 of 222
 Add water charges @1% on 1% 362.05 3.62
labour
Basic rate per 1 Sqmt. 1071.85
Rate for other Floors GF FF SF TF 4th
Basic rate per 1 Sqmt. 1071.85 1071.85 1071.85 1071.85 1071.85
Lift charges @ 10% extra on each 36.21 72.41 108.62 144.82
floor
1071.85 1108.06 1144.26 1180.47 1216.67
Add Overheads & Contractors 0.00000 0.00 0.00 0.00 0.00 0.00
Profit @13.615%
Rate per Sqmt. 1071.85 1108.10 1144.30 1180.50 1216.70
set over a base coat of CM (1:8),
Flooring with
12mm thick (joints of stone must
be flushed) over C.C. bed already
laid or R.C.C. roof slab only after
it is properly cured, cleaned,
moistered and where necessary
treated with neat grey cement
slurry of honey like consistency
spred at3.3 kgs of cement for 1
sqm. and jointed with neat cement
paste to full depth, including cost
and conveyance of all materials
like cement, sand, water, flooring
stones etc. to site, seigniorage
charges, sales and other taxes on
all materials, all operational,
incidental and labour charges such
as dressing of flooring stones to
the required sizes, mixing of
cement mortar, laying, jointing,
curing, lift charges etc., complete
for finished item of work.(APSS
No.703 & 701)
39 Flooring with Polished Bethamcherla pure white stone minimum of 25 mm thick
(0.254M x 0.254M) set over a base coat of CM (1:8), 12mm thick (joints of stone must be
flushed) over C.C. bed already laid or R.C.C. roof slab only after it is properly cured,
cleaned, moistered and where necessary treated with neat grey cement slurry of honey
like consistency spred at3.3 kgs of cement for 1 sqm. and jointed with neat cement paste to
full depth, including cost and conveyance of all materials like cement, sand, water, flooring
stones etc. to site, seigniorage charges, sales and other taxes on all materials, all
operational, incidental and labour charges such as dressing of flooring stones to the
required sizes, mixing of cement mortar, laying, jointing, curing, lift charges etc., complete
for finished item of work.(APSS No.703 & 701)

Material
Cost of Polished Bethamcherla 1.10 Sqmt. 12267.30 1.00 Sqmt. 13494.03
pure white stone minimum of 25
mm thick (0.254M x 0.254M)

Cement for Jointing, Morter and 7.46 Kgs 4300.00 1000.00 Kgs 32.08
slurry (2.00+2.16+3.30)

Sand for mortor(C.M. 1:8) 0.012 cum 693.50 1.00 cum 8.32

Machinery
Machine charges for 0.1 day 0.00 1.00 day 0.00
rubbuing/polishing floor
LA charges on crew charges 25% 0.00

Labour
1st Class Mason 0.31 Nos. 625.00 1.00 Each 193.75
2nd Class Mason 0.11 Nos. 575.00 1.00 Each 63.25

Page 184 of 222

 Man Mazdoor 0.086 Nos. 525.00 1.00 Each 45.15
Add water charges @1% on 1% 302.15 3.02
labour
Basic rate per 1 Sqmt. 13839.60
Rate for other Floors GF FF SF TF 4th
Basic rate per 1 Sqmt. 13839.60 13839.60 13839.60 13839.60 13839.60
Lift charges @ 10% extra on each 30.22 60.43 90.65 120.86
floor
13839.60 13869.82 13900.03 13930.25 13960.46
Add Overheads & Contractors 0.00000 0.00 0.00 0.00 0.00 0.00
Profit @13.615%

Rate per 1 Sqmt. Total 13839.65 13869.85 13900.05 13930.30 13960.50

set over a base coat of CM (1:8),

Flooring with
12mm thick (joints of stone must
be flushed) over C.C. bed already
laid or R.C.C. roof slab only after
it is properly cured, cleaned,
moistered and where necessary
treated with neat grey cement
slurry of honey like consistency
spred at3.3 kgs of cement for 1
sqm. and jointed with neat cement
paste to full depth, including cost
and conveyance of all materials
like cement, sand, water, flooring
stones etc. to site, seigniorage
charges, sales and other taxes on
all materials, all operational,
incidental and labour charges such
as dressing of flooring stones to
the required sizes, mixing of
cement mortar, laying, jointing,
curing, lift charges etc., complete
for finished item of work.(APSS
40 Flooring
No.703 &with701) Polished Black Kadapa slabs minimum of 15 mm thick (0.457M x
0.457M) set over a base coat of CM (1:8), 12mm thick (joints of stone must be flushed)
over C.C. bed already laid or R.C.C. roof slab only after it is properly cured, cleaned,
moistered and where necessary treated with neat grey cement slurry of honey like
consistency spred at3.3 kgs of cement for 1 sqm. and jointed with neat cement paste to full
depth, including cost and conveyance of all materials like cement, sand, water, flooring
stones etc. to site, seigniorage charges, sales and other taxes on all materials, all
operational, incidental and labour charges such as dressing of flooring stones to the
required sizes, mixing of cement mortar, laying, jointing, curing, lift charges etc., complete
for finished item of work.(APSS No.703 & 701)

Material
Cost of Polished Black Kadapa 1.1 Sqmt. 12018.07 1.00 Sqmt. 13219.88
slabs minimum of 15 mm thick
(0.457M x 0.457M)

Cement for Morter and slurry 7.46 Kgs 4300.00 1000.00 Kgs 32.08
Sand for mortor(C.M. 1:8) 0.012 cum 693.50 1.00 cum 8.32
Machinery
Machine charges for 0.1 day 0.00 1.00 day 0.00
rubbuing/polishing floor
LA charges on crew charges 25% 0.00
Labour
1st Class Mason 0.31 Nos. 625.00 1.00 Each 193.75

Page 185 of 222

 2nd Class Mason 0.11 Nos. 575.00 1.00 Each 63.25
Man Mazdoor 0.086 Nos. 525.00 1.00 Each 45.15
Add water charges @1% on 1% 302.15 3.02
labour
Basic rate per 1 Sqmt. 13565.45
Rate for other Floors GF FF SF TF 4th
Basic rate per 1 Sqmt. 13565.45 13565.45 13565.45 13565.45 13565.45
Lift charges @ 10% extra on each 30.52 61.03 91.55 122.07
floor
13565.45 13595.97 13626.48 13657.00 13687.52
Add Overheads & Contractors 0.00000 0.00 0.00 0.00 0.00 0.00
Profit @13.615%

Rate per 1 Sqmt. Total 13565.50 13596.00 13626.50 13657.05 13687.55

laid over existing CC bed or roof Flooring with

slab set over a base coat of CM
(1:8), 12mm thick and pointing
with CM(1:3) to full depth of
flooring slabs dully filling joints
neatly , including cost and
conveyance of all materials like
flooring stones, cement, sand,
water, etc. to site, seigniorage
charges, sales and other taxes on
all materials, all operational,
incidental and labour charges such
as mixing of cement mortar,
laying, pointing, curing, lift
charges etc., complete for finished
41 item of with
Flooring work.(APSS No.703 slabs
Rough Kadapa & of minimum 40 mm thick, size not less than (0.457 x
701)
457M)laid over existing CC bed or roof slab set over a base coat of CM (1:8), 12mm thick
and pointing with CM(1:3) to full depth of flooring slabs dully filling joints neatly ,
including cost and conveyance of all materials like flooring stones, cement, sand, water,
etc. to site, seigniorage charges, sales and other taxes on all materials, all operational,
incidental and labour charges such as mixing of cement mortar, laying, pointing, curing,
lift charges etc., complete for finished item of work.(APSS No.703 & 701)

Rough Kadapa slab 1.05 Sqmt. 11980.40 10.00 Sqmt. 1257.94

Cement Mortar (1:8) 2.16 kg 4.30 1.00 kg 9.29
sand for Cement Mortar (1:8) 0.012 cum. 613.50 1.00 cum. 7.36

Pointing with CM (1:3) 0.096 Sqmt. 183.92 1.00 Sqmt. 17.66

1st Class Mason 0.096 Nos. 625.00 1.00 Each 60.00
2nd Class Mason 0.224 Nos. 575.00 1.00 Each 128.80
Man Mazdoor 0.23 Nos. 525.00 1.00 Each 120.75
Woman Mazdoor 0.10 Nos. 525.00 1.00 Each 52.50
Basic rate per 1 Sqmt. 1654.30
Rate for other Floors GF FF SF TF 4th
Basic rate per 1 Sqmt. 1654.30 1654.30 1654.30 1654.30 1654.30
Lift charges @ 10% extra on each 36.21 72.41 108.62 144.82
floor
1654.30 1690.51 1726.71 1762.92 1799.12
Add Overheads & Contractors 0.00000 0.00 0.00 0.00 0.00 0.00
Profit @13.615%

Rate per 1 Sqmt. Total 1654.30 1690.55 1726.75 1762.95 1799.15

Page 186 of 222

 with lengthProviding
equal skirting
to flooring
to internal walls 12.5 Cm high with
stones set over a base coat of CM
(1:3), 12mm thick with cement
slurry of honey like consistency
spread @ 3.3 Kgs per sqm and
jointed with neat cement paste
mixed with pigment of matching
shade to full depth (joints of stone
should be flushed), including cost
and conveyance of all materials
like cement, sand, water, flooring
stones etc. to site, seigniorage
charges, sales and other taxes on
all materials, all operational,
incidental and labour charges such
as dressing of flooring stones to
the required sizes, mixing of
cement mortar, laying, jointing,
curing, lift charges etc., complete
for finished item of work.(APSS
42 No.701
Providing& 707)
skirting to internal walls 12.5 Cm high withPolished Black Kadapa slabs
minimum of 15 mm thick (0.457M x 0.457M) with length equal to flooring stones set over
a base coat of CM (1:3), 12mm thick with cement slurry of honey like consistency spread
@ 3.3 Kgs per sqm and jointed with neat cement paste mixed with pigment of matching
shade to full depth (joints of stone should be flushed), including cost and conveyance of all
materials like cement, sand, water, flooring stones etc. to site, seigniorage charges, sales
and other taxes on all materials, all operational, incidental and labour charges such as
dressing of flooring stones to the required sizes, mixing of cement mortar, laying, jointing,
curing, lift charges etc., complete for finished item of work.(APSS No.701 & 707)

Material
Polished Black Kadapa slabs 1.05 Sqmt. 12018.07 1.00 Sqmt. 12618.98
minimum of 15 mm thick
(0.457M x 0.457M)
Sand for Cement Mortar (1:3) 0.012 cum. 693.50 1.00 cum. 8.32

cement for Cement Mortar (1:3) 5.76 Kgs 4300.00 1000.00 Kgs 24.77
base coat
Cement for slurry 3.3 Kgs 4300.00 1000.00 Kgs 14.19
Labour
1st Class Mason 0.096 Nos. 625.00 1.00 Each 60.00
2nd Class Mason 0.224 Nos. 575.00 1.00 Each 128.80
Man Mazdoor 0.31 Nos. 525.00 1.00 Each 162.75
Add water charges @1% on 1% 351.55 3.52
labour
Basic rate per 1 Sqmt. 13021.32

Rate for other Floors GF FF SF TF 4th

Basic rate per 1 Sqmt. 13021.32 13021.32 13021.32 13021.32 13021.32
Lift charges @ 10% extra on each 35.51 71.01 106.52 142.03
floor
13021.32 13056.83 13092.33 13127.84 13163.35
Add Overheads & Contractors 0.00000 0.00 0.00 0.00 0.00 0.00
Profit @13.615%

Rate per 1 Sqmt. Total 13021.35 13056.85 13092.35 13127.85 13163.40

Page 187 of 222

 in Single piece with theSupplying
edges and fixing of
flat nosed and set over a base coat
of CM (1:3), 12mm thick, and
fixing in position with neat
cement paste including cost and
conveyance of all materials like
cement, sand, water, stones etc. to
site, seigniorage charges, sales
and other taxes on all materials,
all operational, incidental and
labour charges such as dressing of
stones to the required sizes,
mixing of cement mortar, fixing
in position, curing, lift charges
etc., complete for finished item of
work For raisers (APSS No.701 &
43 707)
Supplying and fixing of Polished Black Kadapa slabs minimum of 15 mm thick (0.457M x
0.457M) in Single piece with the edges flat nosed and set over a base coat of CM (1:3),
12mm thick, and fixing in position with neat cement paste including cost and conveyance
of all materials like cement, sand, water, stones etc. to site, seigniorage charges, sales and
other taxes on all materials, all operational, incidental and labour charges such as dressing
of stones to the required sizes, mixing of cement mortar, fixing in position, curing, lift
charges etc., complete for finished item of work For raisers (APSS No.701 & 707)

For Raisers of 0.15 Mt. Height

Material
Polished Black Kadapa slabs 1.05 Sqmt. 12018.07 1.00 Sqmt. 12618.98
minimum of 15 mm thick
(0.457M x 0.457M)
Sand for Cement Mortar (1:3) 0.012 cum. 693.50 1.00 cum. 8.32

Cement for Cement Mortar (1:3) 5.76 Kgs 4300.00 1000.00 Kgs 24.77
base coat
Cement for slurry 3.3 Kgs 4300.00 1000.00 Kgs 14.19
Labour
1st Class Mason 0.096 Nos. 625.00 1.00 Each 60.00
2nd Class Mason 0.224 Nos. 575.00 1.00 Each 128.80
Man Mazdoor 0.31 Nos. 525.00 1.00 Each 162.75
Flat nosing edges 0 Rmt. 50.00 1.00 Rmt. 0.00
Add water charges @1% on 1% 351.55 3.52
labour
Basic rate per 1 Sqmt. 13021.32
Rate for other Floors GF FF SF TF 4th
Basic rate per 1 Sqmt. 13021.32 13021.32 13021.32 13021.32 13021.32
Lift charges @ 10% extra on each 35.16 70.31 105.47 140.62
floor
13021.32 13056.48 13091.63 13126.79 13161.94
Add Overheads & Contractors 0.00000 0.00 0.00 0.00 0.00 0.00
Profit @13.615%

Rate per Sqmt. 13021.32 13056.48 13091.63 13126.79 13161.94

Page 188 of 222

 in Single piece with theSupplying
edges and fixing of
flat nosed and set over a base coat
of CM (1:8), 12mm thick, and
fixing in position with neat
cement paste including cost and
conveyance of all materials like
cement, sand, water, stones etc. to
site, seigniorage charges, sales
and other taxes on all materials,
all operational, incidental and
labour charges such as dressing of
stones to the required sizes,
mixing of cement mortar, fixing
in position, curing, lift charges
etc., complete for finished item of
work for Treads (APSS No.701
& 707)
44 Supplying and fixing of Polished Black Kadapa slabs minimum of 15 mm thick (0.457M x
0.457M) in Single piece with the edges flat nosed and set over a base coat of CM (1:8),
12mm thick, and fixing in position with neat cement paste including cost and conveyance
of all materials like cement, sand, water, stones etc. to site, seigniorage charges, sales and
other taxes on all materials, all operational, incidental and labour charges such as dressing
of stones to the required sizes, mixing of cement mortar, fixing in position, curing, lift
charges etc., complete for finished item of work for Treads (APSS No.701 & 707)

Treads of 0.30 Mt wide

Polished Black Kadapa slabs 1.1 Sqmt. 12018.07 1.00 Sqmt. 13219.88
minimum of 15 mm thick
(0.457M x 0.457M)
Cement for Jointing, Morter and 7.46 Kgs 4300.00 1000.00 Kgs 32.08
slurry (2.00+2.16+3.30)
Coarse sand for mortor(C.M. 1:8) 0.012 cum 693.50 1.00 cum 8.32

Machinery
Machine charges for 0.1 day 0.00 1.00 day 0.00
rubbuing/polishing floor
LA charges on crew charges 25% 0.00
Labour
1st Class Mason 0.31 Nos. 625.00 1.00 Each
193.75
2nd Class Mason 0.11 Nos. 575.00 1.00 Each
63.25
Man Mazdoor 0.086 Nos. 525.00 1.00 Each
45.15
Flat nosing edges as per BMM- Rmt. 45.00 1.00 Rmt.
0.00
V.13
Add water charges @1% on 1% 302.15 3.02
labour
Basic rate per 1 Sqmt. 13565.45
Rate for other Floors GF FF SF TF 4th
Basic rate per 1 Sqmt. 13565.45 13565.45 13565.45 13565.45 13565.45
Lift charges @ 10% extra on each 30.22 60.43 90.65 120.86
floor 13565.45 13595.67 13625.88 13656.10 13686.31
Add Overheads & Contractors 0.00000 0.00 0.00 0.00 0.00 0.00
Profit @13.615%
Rate per Sqmt. Say 13565.45 13595.67 13625.88 13656.10 13686.31

45 In - situ - Granolithic Concrete Flooring 20mm thick with CC(1:1:2) Prop: using 6mm to
12mm size HBG machine crushed metal laid monolithically over 100mm thick CC flooring
bed (1:5:10) with 40mm HBG metal in alternate panels of size not exceeding 1.50m x
1.50m and finishing the top surface to required smoothness and slopes, thread lining as
directed by the Engineer - in - charge including cost and conveyance of all materials like
cement, sand, water, etc. to site, seigniorage charges, sales and other taxes on all materials,
all operational, incidental and labour charges such as mixing of cement concrete, laying,
curing, lift charges etc., complete for finished item of work (APSS No.701 & 710)

Page 189 of 222

 BLD-CSTN-9-13
6mm to 12mm HBG metal 0.017 cum 1104.00 1.00 cum 18.77
Sand 0.0085 cum 693.50 1.00 cum 5.89
Cement 12 Kgs 4300.00 1000.00 Kgs 51.60
1st Class Mason 0.125 Nos. 625.00 1.00 Each 78.13
2nd Class Mason 0.006 Nos. 575.00 1.00 Each 3.45
Manand women Mazdoor 0.3 Nos. 525.00 1.00 Each 157.50
Add water charges @1% on 1% 239.08 2.39
labour 317.73
Add Overheads & Contractors 0.00000 317.73 0.00
Profit @13.615%
Rate per 1 Sqmt. Total 317.75

46 Flooring with Non-skid red or white full body Ceramic floor tiles of size 300 x 300 mm
and thickness between 7-8 mm 1st quality conforming to IS:13711, IS:13712,
IS:13630(Parts 1to15) of any colour and finish in all shades and Designs set over a base
coat of CM (1:8), 12mm thick laid over flooring bed / V.R.C.C. slab, with neat cement
slurry of honey like consistency spread at the rate of 3.3 Kgs of cement per Sq.m and
jointed with neat white cement paste to full depth mixed with pigment of matching shade
including cost and conveyance of all materials like cement, sand, water, ceramic tiles etc.
to site, seigniorage charges, sales and other taxes on all materials, all operational,
incidental and labour charges such as mixing of cement mortar, laying, curing, lift charges
etc., complete for finished item of work.(APSS No.701 & 707) in All Floors

Material
Ceramic Tiles 1.05 Sqmt. 370.00 1.00 Sqmt. 388.50
Sand 0.012 cum 693.50 1.00 cum 8.32
Cement 2.16 Kgs 4300.00 1000.00 Kgs 9.29
Grey Cement for slurry 3.3 Kgs 4300.00 1000.00 Kgs 14.19
White Cement for pointing 0.2 Kgs 27.00 1.00 Kgs 5.40
Labour
1st Class Mason 0.096 Nos. 625.00 1.00 Each 60.00
2nd Class Mason 0.224 Nos. 575.00 1.00 Each 128.80
Man Mazdoor 0.33 Nos. 525.00 1.00 Each 173.25
Add water charges @1% on 1% 362.05 3.62
labour
Basic rate per 1 Sqmt. 791.37
Rate for other Floors GF FF SF TF 4th
Basic rate per 1 Sqmt. 791.37 791.37 791.37 791.37 791.37
Lift charges @ 10% extra on each 36.21 72.41 108.62 144.82
floor 791.37 827.58 863.78 899.99 936.19
Add Overheads & Contractors 0.00000 0.00 0.00 0.00 0.00 0.00
Profit @13.615%
Rate per Sqmt. 791.40 827.60 863.80 900.00 936.20

47 Dadooing to walls with glazed red or white full body ceramic wall tiles of size 200 x 300
mm / 245 mm x 325 mm and thickness 6mm 1st quality conforming to IS:13711, IS:13712,
IS:13630 (Parts 1 to 15) of any colour and finish in all shades and Designs and set over a
base coat of CM (1:5), 12mm thick and neat cement paste at the rate of 3.3 Kg/Sqmt. and
jointed with white cement paste mixed with pigment of matching shade including cost and
conveyance of all materials like cement, sand, water, tiles, etc. to site, seigniorage charges,
sales and other taxes on all materials, C921 such as mixing of cement mortar, laying in
position, curing, lift charges etc., complete for finished item of work (APSS No.701 &
707) in All Floors

Glazed ceramic wall tiles 1.05 Sqmt 323.00 1.00 Sqmt 339.15
Grey cement 0.33 Kgs 4300.00 1000.00 Kgs 1.42
White cement 0.6 Kgs 27.00 1.00 Kgs 16.20
Cement for Cement Mortar CM 3.45 Kgs 4300.00 1.00 Kgs 14.84
(1:5) Page 190 of 222
 Sand Mortar CM (1:5) 0.012 Cum 693.50 1.00 Cum 8.32
Labour
1st Class Mason 0.077 Nos. 625.00 1.00 Each 48.13
Man Mazdoor 0.08 Nos. 525.00 1.00 Each 42.00
Basic rate per 1 Sqmt. 470.05
Rate for other Floors GF FF SF TF 4th
Basic rate per 1 Sqmt. 470.05 470.05 470.05 470.05 470.05
Lift charges @ 10% extra on each 9.01 18.03 27.04 36.05
floor 470.05 479.06 488.08 497.09 506.10
Add Overheads & Contractors 0.00000 0.00 0.00 0.00 0.00 0.00
Profit @13.615%
Rate per Sqmt. 470.05 479.10 488.10 497.10 506.10

48 Whiting to new walls and ceiling in two coats with White cement or equavalent
quality to give an even shade after thoroughly brushing the surface to remove all loose
powdered materials including cost and conveyance of all materials and water to site, sales
& other taxes, all operational, incidental and labour charges such as cleaning the surface,
painting, curing etc., complete for finished item of work for internal walls. (APSS No.901
& 908) in All Floors
White cement 0.2 kgs 27.00 1.00 kgs 5.40
Painter 0.021 Nos. 620.00 1.00 Each 13.02
Man Mazdoor 0.032 Nos. 525.00 1.00 Each 16.80
sundries including 1% 35.22 0.35
brushes,ladders, etc., 35.57
Add Overheads & Contractors 0.00000 35.57 0.00
Profit
Rater @13.615%
per 1 Sqmt. for all floors Total 35.60

49 Painting to New walls with two coats of water proof cement paint of superior quality of
approved brand and shade over base coat of cement primer grade -I making three coats in
all to give an even shade after thoroughly brushing the surface to remove all loose
powdered materials, including cost and conveyance of all materials, including cost and
conveyance of all materials, cost of brushes, water to site, etc., sales & other taxes, all
operational, incidental and labour charges such as scaffolding charges, lift charges, curing
etc., complete for finished item of work in all floors for External Walls.(APSS No. 912)
in All Floors
Material
Cement Primer Grade I 0.1 Kgs 180.00 1.00 Kgs 18.00
water proof cement paint pack 0.35 Kgs 40.36 1.00 Kgs 14.13
Labour for Priming Coat
1st class painter 0.021 Nos. 725.00 1.00 Each 15.23
2nd class painter 0.049 Nos. 575.00 1.00 Each 28.18
Labour for Two Coats
1st class painter 0.015 Nos. 725.00 1.00 Each 10.88
2nd class painter 0.035 Nos. 575.00 1.00 Each 20.13
Man and women mazdoor 0.15 Nos. 525.00 1.00 Each 78.75
185.28
Add Overheads & Contractors 0.00000 185.28 0.00
Profit
Rater @13.615%
per 1 Sqmt. for all floors Total 185.30

50 Painting to New Iron work with two coats of ready mixed Synthetic Enamel paints in all
shades Grade - I having VOC (Volatile Organic Compound ) content less than 50 grams/
liter over an existing steel primer including cost and conveyance of all materials to site,
sales & other taxes, incidental, operational and all labour charges etc., complete for
finished item of work. (APSS No. 1201, 1207 & 1212).in All Floors

Page 191 of 222

 Cost of Synthetic Enamel Paint 0.11 Ltr 248.00 1.00 Ltr 27.28

1st Class Painter 0.033 Nos. 725.00 1.00 Each 23.93

2nd Class Painter 0.077 Nos. 575.00 1.00 Each 44.28
95.48
Add Overheads & Contractors 0.00000 95.48 0.00
Profit @13.615%

Rater per 1 Sqmt. for all floors Total 95.50

51 Supply and fixing of 110mm dia ISI mark PVC rain water spouts of 4 Kg/cm2
pressure including Cost of necessary pvc bends, shoes and M.S.clamps and all other
accessories and fixing in position including cost and conveyance of all materials to site ,
seigniorage charges sales and other taxes on all materials, all operational, incidental and
labour cahrges such as fixing in alignment etc., complete for finished item of work.(APSS
NO1328) in All Floors

Cost of 110mm dia PVC Pipe. 3.00 Rmt. 162.00 1.00 Rmt 486.00

Cost of P.V.C.Bend 1.00 No. 70.00 1.00 No 70.00

Cost PVC shoe 1.00 No. 59.00 1.00 No 59.00
Cost of Clips 3.00 Nos. 15.00 1.00 No 45.00
Plumber 1st Class 0.30 Nos. 725.00 1.00 Each 217.50
Plumber 2nd class 0.70 Nos. 575.00 1.00 Each 402.50
Man Mazdoor 1.00 No. 525.00 1.00 Each 525.00
Rate per 3 Rmt. 1805.00
601.67
Add Overheads & Contractors 0.00000 601.67 0.00
Profit @13.615%
Rate per Rmt. Total 601.70

52 Reinforced cement mortar Facia 5 cm thick in CM (1:3) for drop walls, Fins &
staircase railing with rabbit wire mesh & nominal reinforcement as directed by Engineer-
in-charge with dubara spong finishing including cost & conveyence of all materials to site,
including seigniorage charges, sales and other taxes on all materials and all operational,
incidental charges such as labour charges, like mixing cement mortar, scaffolding charges,
lift charges, curing, for making 50 mm thick RCM Paradah walls (RCM Drop walls)
including tying Rabbit (chicken) wire mesh to the existing mild steel / HYSD Steel
reinforcement applying mortar lumps, finishing, plastering to both faces, sponge finishing
etc complete for finished item of work but excluding cost of steel and its fabrication
charges in All Floors

materials
Costof rabit wire mesh 1.33 Sqmt 17.00 1.00 Sqmt 22.61
43 Grade cement 31.91 Kgs 4300.00 1000.00 Kgs 137.21
Cost of coarse sand 0.06 Cum 693.50 1.00 Cum 40.22
Labour
1st Class Mason 0.80 Nos. 625.00 1.00 Each 500.00
Miller operator 0.10 Nos. 625.00 1.00 Each 62.50
Man Mazdoor 1.00 Nos. 525.00 1.00 Each 525.00
Hire charges of Concrete mixer 0.20 Hour 44.50 1.00 Hour 8.90

Basic rate per 1 Sqmt. 1296.45

Rate for other Floors GF FF SF TF 4th
Basic rate per 1 Sqmt. 1296.45 1296.45 1296.45 1296.45 1296.45
Lift charges @ 10% extra on each 0.00 108.75 217.50 326.25 435.00
floor Page 192 of 222
 1296.45 1405.20 1513.95 1622.70 1731.45
Add Overheads & Contractors 0.00000 0.00 0.00 0.00 0.00 0.00
Profit @13.615%
Rate per Sqmt. 1296.45 1405.20 1513.95 1622.70 1731.45

53 Painting to New wood work with two coats of ready mixed Synthetic Enamel paints in
all shades Grade - I having VOC (Volatile Organic Compound ) content less than 50
grams/ liter to give an even shade over base coat Primer with Luppam finishing after
thoroughly brushing the surface to remove all remains including cost and conveyance of
all materials to site, sales & other taxes, all operational, incidental and labour charges etc.,
complete for finished item of work.(3 coats) (APSS No. 1201 & 1212).in All Floors

PRIMARY COAT
Putty for wood work 0.1 Kg. 130.00 1.00 Kg 13.00
Ready mixed primer 0.07 lit 130.00 1.00 Lt 9.10
Ist class painter 0.021 Nos. 725.00 1.00 Each 15.23
2nd class painter 0.049 Nos. 575.00 1.00 Each 28.18
TWO COATS OF PAINTING
Cost of Synthetic Enamel Paint 0.12 lit 248.00 1.00 lit 29.76
1st class painter 0.036 Nos. 725.00 1.00 Each 26.10
2nd class painter 0.084 Nos. 575.00 1.00 Each 48.30
169.66
Add Overheads & Contractors 0.00000 169.66 0.00
Profit @13.615%
Rate per 1 Sqmt. for all Floors Total 169.70

54 Supply and Fixing of 50mm thick Jali including cost and conveyance of all materials to
site, sales & other taxes, all operational, incidental and labour charges etc., complete for
finished item of work in All Floors.

Rate as per SSR 1 Sqmt 340.00 1.00 Sqmt 340.00

Add Overheads & Contractors 0.00000 340.00 0.00
Profit @13.615%

Rate per Sqmt. Total 340.00

55 Supplying & fixing collapsible steel shutters with vertical,double channel of 20 x10x2 mm
of 100 mm centre ,Bracerswith flat iron 40x40x6 mm with 38 mm dia steel pulleys, thetop,
bottom and side vertical frames of the collapsible gate with 65x65mmx8mm MS Angle and
middle guide rail at site height with 65mmx8mm MS flat for the pulleys to guide andfixed
with necessary hold fasts, bolts, nuts, rivets, lockingarrangements, stoppers, handles, all
accessories all fixturesand painted with one coat of approved steel primer etc.,complete for
finished item of work as per special spn 1105

Rate as per SSR 1 Sqmt 2798.00 1.00 Sqmt 2798.00

Add Overheads & Contractors 0.00000 2798.00 0.00
Profit @13.615%
Rate per Sqmt. Total 2798.00
56 Supply and Fixing AC Sheet Corrugated 6mm thick including Labour Charges for fixing
AC Sheets including cost of J bolts bitumen washers etc with or without ridges complete
including cost and conveyance of all materials to site, sales and other taxes, all labour
charges etc., complete for finished item of work

Unit = 1 Sqmt
A ) material
cost of 6mm thick corregated AC 1.05 Sqmt 204.00 1.00 Sqmt 214.20
sheets

Page 193 of 222

 8mm dia G.I.J bolts & nuts 2.2 Nos. 9.00 1.00 Each 19.80
G.I washersBitumen washers 2.2 Nos. 2.00 1.00 Each 4.40
Bitumen washers 2.2 Nos. 2.00 1.00 Each 4.40
B) labour
Carpenter II class 0.043 Nos. 575.00 1.00 Each 24.73
Man Mazdoor 0.054 Nos. 525.00 1.00 Each 28.35
Sundries including 50 x 6 mm 0.00
Iron wind ties and white lead etc.,
295.88
Rate per 1 Sqmt. for all Floors 295.88
Add Overheads & Contractors 0.00000 0.00
Profit @13.615%
Rate per one Sqmt 295.90

57 Supply & fixing pre-painted galvalium trepizoidal profile roofing sheets with 0.47mm
thickness,coating Alu-zinc coating AZ 150 GSM. Tensile strength : 550 MPA,paint coating
: Regular modified polyster painting. Thickness (top) 18-20 microns,(bottom) 5-7microns
including C/C of all materials like sheets, J bolts, bitumen washers etc. with or wothout
ridge with sales & all other taxes & all labour charges etc. complete for fixing sheets in
position.
Unit = 1 Sqmt
A ) material
pre - painted galvalium trepizoidal 1.05 Sqmt 377.00 1.00 Sqmt 395.85
profile roofing sheets with
0.47mm thickness : BMS-W.56

8mm dia G.I.J bolts & nuts 2.2 Nos. 9.00 1.00 Each 19.80

G.I washersBitumen washers 2.2 Nos. 2.00 1.00 Each 4.40

Bitumen washers 2.2 Nos. 2.00 1.00 Each 4.40

B) labour
Carpenter II class 0.043 Nos. 575.00 1.00 Each 24.73
Man Mazdoor 0.054 Nos. 525.00 1.00 Each 28.35
Sundries including 50 x 6 mm 0.00
Iron wind ties and white lead etc.,

477.53
Rate per 1 Sqmt. for all Floors 477.53
Add Overheads & Contractors 0.00000 0.00
Profit @13.615%
Rate per one Sqmt 477.55
58 Supply and Fixing MS Purlins 50mm dia including Labour Charges for fixing complete
including cost and conveyance of all materials to site, sales and other taxes, all labour
charges etc., complete for finished item of work

Cost of MS Pipe 50mm dia 5.1 Kgs. 60.00 1.00 Kgs. 306.00

Fabrication, Cutting and Fixing 5.1 Kgs. 24.00 1.00 Kgs. 122.40
charges
428.40
Add Overheads & Contractors 0.00000 428.40 0.00
Profit @13.615%
Rate per Rmt. 428.40

Page 194 of 222

59 Supply and Fixing MS GRILLS including Labour Charges for fixing complete including
cost and conveyance of all materials to site, sales and other taxes, all labour charges etc.,
complete for finished item of work

BASIC RATE 1 Kgs. 38.60 1.00 Kgs. 38.60

a) LABOUR
Fabrication charges 1 Kg 27.00 1.00 Kg 27.00
Fixing charges 1 Kg 5.00 1.00 Kg 5.00

Add Overheads & Contractors 0.00000 70.60 0.00

Profit @13.615%
Rate per Kg. 70.60

60 Painting to New walls with two coats of acrylic interior emulsion paint having VOC
(Volatile Organic Compound) content less than 50 grams/ liter.of superior quality of
approved brand and shade over base coat of cement primer grade -I making three coats in
all to give an even shade after thoroughly brushing the surface to remove all loose
powdered materials, including cost and conveyance of all materials, including cost and
conveyance of all materials, cost of brushes, water to site, etc., sales & other taxes, all
operational, incidental and labour charges such as scaffolding charges, lift charges, curing
etc., complete for finished item of work in all floors for Walls.(APSS No. 911) in All
Floors INTERNAL

Supply of water based Cement 0.1 Kgs 141.00 1.00 Kgs 14.10
Primer of Interior Grade- 1
Supply of acrylic interior 0.08 Ltr 194.00 1.00 Ltr 15.52
emulsion paint having VOC
(Volatile
Organic Compound) content less
than 50 grams/ liter.
Labour for Priming Coat
1st class painter 0.021 Nos. 725.00 1.00 Each 15.23
2nd class painter 0.049 Nos. 575.00 1.00 Each 28.18
Labour for Two Coats
1st class painter 0.036 Nos. 725.00 1.00 Each 26.10
2nd class painter 0.084 Nos. 575.00 1.00 Each 48.30
147.42
Add Overheads & Contractors 0.00000 147.42 0.00
Profit
Rater @13.615%
per 1 Sqmt. for all floors Total 147.45

61 Painting to New walls with two coats of acrylic emulsion paint weather proof waterbased,
modified acrylic with silicon additives exterior grade having VOC (Volatile Organic
Compound ) content less than 50 grams/ liter of superior quality of approved brand and
shade over base coat of cement primer grade -I making three coats in all to give an even
shade after thoroughly brushing the surface to remove all loose powdered materials,
including cost and conveyance of all materials, including cost and conveyance of all
materials, cost of brushes, water to site, etc., sales & other taxes, all operational, incidental
and labour charges such as scaffolding charges, lift charges, curing etc., complete for
finished item of work in all floors for Walls.(APSS No. 911) in All Floors EXTERNAL

Supply of water based Cement 0.1 Kgs 180.00 1.00 Kgs 18.00
Primer of Exterior Grade- 2

Page 195 of 222

Supply of acrylic emulsion paint 0.08 Ltr 214.00 1.00 Ltr 17.12
weather proof
waterbased,modified acrylic with
silicon additives exterior grade
having VOC (Volatile Organic
Compound ) content less
than 50 grams/ liter

Labour for Priming Coat

1st class painter 0.021 Nos. 725.00 1.00 Each 15.23
2nd class painter 0.049 Nos. 575.00 1.00 Each 28.18
Labour for Two Coats
1st class painter 0.021 Nos. 725.00 1.00 Each 15.23
2nd class painter 0.049 Nos. 575.00 1.00 Each 28.18
Mazdoor 0.150 Nos. 525.00 1.00 Each 78.75
200.67
Add Overheads & Contractors 0.00000 200.67 0.00
Profit
Rater @13.615%
per 1 Sqmt. for all floors Total 200.70

Assistant Engineer Dy. Executive Engineer Executive Engineer

APEWIDC, Srikakulam APEWIDC,Srikakulam APEWIDC,Srikakulam

Page 196 of 222

 129.6

Page 197 of 222

 Standard Data - Electrical Items SSR 2016-2017

Name of the work : Improving Infrastructure Facilities to Govt.Polytechnic at Srikakulam (V&M) in

Srikakulam District
Under Nadu - Nedu
Area allowence
Overheads and contractors profit on
materials
Overheads and contractors profit on labour 0.000%

Index Specific Description Unit QTY Rate Rs. Amount Rs. ohr
-code ation No.
1 2 3 4 5 6 7
1 1.4.2 Supply and Fixing of 25mm dia 2.20mm thick PVC pipe (ISI MARK) concealed in Roof Slabs
with all required accessories including masonary work and labour charges etc., complete.
(C) Make : Sudhakar/ Maco Plast / Modi

Taking Output = 100 M

a) Material
elec-1.2.4 25mm dia 2mm thick PVC pipe 100 M 1 3100.00 3100.00
elec-1.2.32 25mm dia 1,2,3 & 4 way deep Junction Box Each 12 25.00 300.00
elec-1.2.37 25mm PVC bends Each 12 4.00 48.00
3448.00
Add contr profit @14% on material 0.00 0.00
Total material cost 3448.00
b) Labour charges :
elec-8.1.74 Skilled Electrician day 2 515.00 1030.00
elec-8.1.75 Semi skilled Electrician day 2 400.00 800.00
elec-8.1.76 Helpers day 2 400.00 800.00
Add area allowence on labour charges @ 0% 0.00

Add contr profit @14% on Labour 0% 2630.00 0.00

C) Cost for 100 RM 6078.00
Rate per Metre = C/100 60.80

Note : 1. If 25mm dia PVC / MS pipes are used for

2 1.4.2 light
Supply/ fan
and point,
Fixing add the cost
of 25mm of sheet
dia 1.80mm metal
thick / well
P.V.C. pipe (ISI MARK) concealed in wall with
all required accessories including masonary work for light, fan and separate plug point with
(b) well seasoned TW box including all labour charges etc., complete. Make :

Taking Output = 100 M

a) Material
elec-1.2.3 25mm dia 1.5mm thick PVC pipe 100 M 1 2800.00 2800.00
elec-8.1.7 U' Links 100 Nos 2 44.00 88.00

elec-1.3.5 8"x10" TW deep boxes Each 2 179.00 358.00

elec-1.2.32 25mm dia 1,2,3 & 4 way deep Junction Box Each 12 25.00 300.00
elec-1.2.37 25mm PVC bends Each 12 6.00 72.00
elec-8.1.50 Cement kg 50 7.00 350.00
3968.00
Add contr profit @14% on material 0.00 0.00
Total material cost 3968.00
b) Labour charges :
elec-8.1.74 Skilled Electrician day 2 515.00 1030.00
elec-8.1.75 Semi skilled Electrician day 2 400.00 800.00
elec-8.1.76 Helpers day 2 400.00 800.00
ELEC-8.1.77Mason Ist class day 2 445.00 890.00
Add area allowence on labour charges @ 0% 0.00

Add contr profit @14% on Labour 0% 3520.00 0.00

C) Cost for 100 RM 7488.00
Rate per Metre = C/100 74.90

El Data old P No 198

 Index Specific Description Unit QTY Rate Rs. Amount Rs. ohr
-code ation No.
1 2 3 4 5 6 7
3 2.1.1 Wiring with 2 runs of 14/0.3mm (1.0 Sq.mm) Fire Retardant Low Smoke (FRLS) P.V.C. The R&B
insulated flexible copper cable (ISI MARK) in existing pipe with 6A switch, Ceiling rose and Department
3mm thick hylam sheet covering to switch control box including all labour charges etc., Proposed
complete for light, bell, fan and exhaust fan points in Non-Residential Buildings Labour, for
Makes of Wires : Finolex / R.R.Cable Makes of Switches : Anchor Penta both piping &
Cherry / Gold Madel Olive / Million Zoom / Great white omega wiring
considering
40% Labour,
Taking Output = 6 Points Million
for Wire/ RPG/
draw.
paragon
Keeping this,
a) Material
the labour is
elec-1.5.1 14/0.3mm (1.00 Sqmm) FRLS PVC insulated 100 M 1 1051.00 1051.00
proposed for
flexible copper wire
wiring 100
elec-1.7.1 6A Switch @18/- each each 6 18.00 108.00 RM.
elec-1.7.13 6A 3 way Ceiling Rose@21/-each each 6 21.00 126.00
elec-8.1.51 25 x 20 cms (10" x8") Hylam sheet 3mm thick no 1 47.25 47.25

1332.25
Add contr profit @14% on material 0.00 0.00
Total material cost 1332.25
b) Labour charges :
elec-8.1.74 Skilled Electrician day 0.6 515.00 309.00
elec-8.1.75 Semi skilled Electrician day 1.2 400.00 480.00
elec-8.1.76 Helpers day 0.6 400.00 240.00
Add area allowence on labour charges @ 0% 0.00

Add contr profit @14% on Labour 0% 1029.00 0.00

C) Cost for 6 Points 2361.25
Rate per Point = C/6 393.55
4 12 Supply and Fixing of 16A 3pin and 6A 3pin plug socket with and 16A switch control duly
recessed in wall with MS switch deep box of 6" x8" x2 1/2" size covered with hylam sheet
including earth connections and all labour charges etc., complete.
Makes : G

Taking Output = each

a) Material
ELEC- 20 x 15 cms (8" x6") MS switch deep box each 1 105.00 105.00
1.3.10
elec-1.4.18 21.6 x 16.6 cms (8.5 x 6.5") 3mm thick hylam each 1 262.00 262.00
sheet
elec-1.7.11 16A 3 pin / 6A 3pin plug socket (5 in 1) each 1 50.00 50.00
417.00
Add contr profit @14% on material 0.00 0.00
Total material cost 417.00
b) Labour charges :
elec-8.1.77 Skilled Electrician day 0.1 515.00 51.50
elec-8.1.78 Semi Skilled Electrician day 0.1 400.00 40.00
elec-8.1.85 Helpers day 0.1 400.00 40.00
Add area allowence on labour charges @ 0% 0.00

Add contr profit @14% on Labour 0% 131.50 0.00

Rate per each 548.50
Note : Labour Charges proposed for 10 jobs per day

5 19 Supply and run of 2 of 2.5 Sq mm PVC insulated flexible copper cable and 1 run of 1.00 Sq
mm flexible PVC insulated flexible copper cable in the existing conduit pipe for run of mains
from main panel board to TPN DB'S with pin type lugs and connectio

Taking Output = 100 M

a) Material
elec-1.5.3 36/0.3mm (2.5 sqmm) FR PVC copper cable 100 M 2 2389.20 4778.40

El Data old P No 199

 Index Specific Description Unit QTY Rate Rs. Amount Rs. ohr
-code ation No.
1 2 3 4 5 6 7
elec-1.5.1 14/0.3mm FR PVC copper cable 100 M 1 1051.00 1051.00
5829.40
Add contr profit @14% on material 0.00 0.00
Total material cost 5829.40
b) Labour charges :
elec-8.1.77 Skilled Electrician (2.0 + 0.5) day 1.005 515.00 517.58
elec-8.1.78 Semi skilled Electrician (6 + 1.5) day 3 400.00 1200.00
elec-8.1.85 Helpers (2.0 + 0.5) day 1.005 400.00 402.00
Add area allowence on labour charges @ 0% 0.00

Add contr profit @14% on Labour 0% 2119.58 0.00

Sundries
C) Cost for 100 RM 7948.98
Rate per Metre = C/100 79.50
Note : Labour Charges considered for 100 M / day

6 21 Supply and fixing TPN Distribution board with IP-43 protection (Metal Door) suitable for 3
phase ELCB / RCCB / FP Isolator as incomer and 10kA SP MCBs as outing going including
internal connection and labour charges for flush mounting etc., complete.
Mak

A 40A FP Isolator - 1 No for incomer, 10kA-

6-32A SP MCBs - 12Nos for outgoing.

Taking Output = each

a) Material
elec.2.12.42 4way TPN, D.B with IP-43 Protection (MD) each 1 2200.00 2200.00
suitable for 3 phase ELCB / RCCB/ FP Isolator
as incommer.
elec- 40A, 4 Pole Isolator each 1 678.00 678.00
2.10.14
elec-2.9.9 10kA - 6-32A range SP MCBs each 12 162.00 1944.00
4822.00
Add contr profit @14% on material 0.00 0.00
Total material cost 4822.00
b) Labour charges :
elec-8.1.77 Skilled Electrician day 0.5 515.00 257.50
elec-8.1.78 Semi Skilled Electrician day 1 400.00 400.00
elec-8.1.85 Helpers day 1 400.00 400.00
Add area allowence on labour charges @ 0% 0.00

Add contr profit @14% on Labour 0% 1057.50 0.00

Sundries such as TW Plugs, Screws Cement LS 14.00 14.00
etc,
Rate per each 5893.50
Note : Labour Charges considered for 2 jobs / day

7 26 Providing independent earthling by excavating a trench to a depth of 2.1 M in all soils, as per
size specified in the Data, using 40mm dia 'B' class GI pipe of 2.5 Mtrs length with necessary
accessories with hume pipe ring duly providing staggered holes

a) Material
elec-8.1.52 Earth Work Excavation of Hard gravel Soil cum 0.81 110.00 89.10
with small boulder for trench 1st step of size
1.5 x 0.6 x 0.9 m
Excavation of Hard disteggrated rocks and cum 0.864 191.10 165.11
boulders for trench 2nd Step of size 1.2 x 0.6
x 1.2 m (Civil SSR)

El Data old P No 200

 Index Specific Description Unit QTY Rate Rs. Amount Rs. ohr
-code ation No.
1 2 3 4 5 6 7
25% extra for narrow trench & pit and back 1 27.50 27.50
filling with Sand, Coke, Salt etc., and leveling

elec-8.1.58 40mm dia 'B' Class G.I pipe Mtr 2.5 381.00 952.50
25 x 6 mm (1"X 1/4") G.I Flat duly drilled Each 1 75.00 75.00
12mm holes (4 Nos) of 200 mm (8") length
elec.8.1.59 Drilling of 16 Nos through holes of 12mm dia Each 16 6.00 96.00
to G.I pipe
elec-8.1.9 G.I Nuts, Bolts an Washers Set 4 13.00 52.00
elec.8.1.61 18" dia hume pipe ring Each 1 220.00 220.00
elec-8.1.13 Hard Coke Kg 40 20.00 800.00
elec-8.1.14 Salt Kg 20 10.00 200.00
2677.21
Add contr profit @14% on material 0.00 0.00
Total material cost 2677.21
b) labour charges for fixing pipe ring and Each
connections
elec-8.1.78 Semi skilled Electrician Nos 0.5 400.00 200.00
elec-8.1.85 Helpers Nos 0.5 400.00 200.00
Add area allowence on labour charges @ 0% 0.00

Add contr profit @14% on Labour 0% 400.00 0.00

Sundries
Rate per each 3077.21
Say 3077.25
8 28 Supply, Transportation and fixing of 4' - 40 Watt box type flourescent single Tube Light fitting
with Energy saving electronic ballast, consuming 28 W suitable for 40 Watt tube on
varnished teak wood round blocks with flexible 3 core wire etc.,, complet Makes : Chowk:
Trinic , tube : Philips / crompton

a) Material
elec-3.6.1 Supply of 1 x 36/40W Box type tube light each 1 800.00 800.00
luminaire powder coated CRCA sheet steel
housing with Electronic Ballast Chokes and all
standard accessories. Makes: Wipro / G.E. /
Phillips / Crompton / Bajaj
elec-3.7.7 Lamp cost of 40W each 1 45.00 45.00
elec-8.1.31 Tw Round blocks each 2 10.00 20.00
ELEC-8.1.6 pvc rawl plugs each 2 40.00 80.00
Elec-1.6.8 23/0060 twin core flexible copper cable M 1.5 10.40 15.60
Rate per each 960.60
Add contr profit @14% on material 0.00 0.00
Total for material 960.60
a) Labour charges
elec-8.1.77 Skilled Electrician day 0.10 515.00 51.50
elec-8.1.78 Semi Skilled Electrician day 0.10 400.00 40.00
Labour for 1 No 1052.10
9 29 Supply and fixing of batten holder / slanting holder in lieu of ceiling rose of light point complete
with all connections and all labour charges with 5.0W LED Lamp with input voltage 90 to
300V, Colour temparature 3000k - 6500k, Beam angle 170 - 220 degrees, B22 base, 350
Lumens. Makes: Phillips / Crompton / Bajaj / Havells / Halonix / VIN / Jaquor / Renesola (for
new installation).
Makes : Gold Medal /Million / Vimal

Taking Output = each

a) Material
elec-1.7.15 PVC batten holder each 1 17.00
ELEC- 5.0W LED Lamp with input voltage each 1 250.00
3.7.33
elec-1.7.13 Deduct Cost of Ceiling Rose each 1 -21.00

El Data old P No 201

 Index Specific Description Unit QTY Rate Rs. Amount Rs. ohr
-code ation No.
1 2 3 4 5 6 7
11.00
Add contr profit @14% on material 0.00 0.00
Total for material 257.00
b) Labour charges :
elec-8.1.77 Skilled Electrician day 0.05 515.00 25.75
elec-8.1.85 Helpers day 0.05 400.00 20.00
Add area allowence on labour charges @ 0% 0.00

Add contr profit @14% on Labour 0% 45.75 0.00

Rate per each 302.75
Note : 1. The Cost of Ceiling Rose may be
deducted in view of holder.
2. Labour Charges proposed for 20 jobs per day

10 32 Supply of 1200 mm (48") sweep 230V, A.C 50 Hz.Ceiling fan with 3 Blades and double ball
bearings with all standard accessories.
Makes: Crompton Decora / Bajaj Ultima /Havells Velocity / Usha Astra / Orient PSPO.

a) Material
elec-5.1.1 1200 mm (48") Ceiling Fan each 1 1700.00 1700

Transportation Charges on Unit Cost 1% 17.00 17.00

1717.00
Add contr profit @14% on material 0.00 0.00
Total material cost 1717.00

11 33 Supply and erecting Electronic type regulator for ceiling fans 1200 mm sweep complete
erected on existing board.Make : Anchor / Gold Medal Olive / Million Zoom

a) Material
elec-1.7.12 Steeped type Electronics type Regulator M 1 198.00 198.00
Add contr profit @14% on material 0.00 0.00
Total material cost 198.00
b) Labour charges.
elec-8.1.78 Semi skilled Electrician day 0.1 400.00 40.00
Sundries. 21.20
Add area allowence on labour charges @ 0% 0.00

Add contr profit @14% on Labour 0% 61.20 0.00

Rate per Each 259.20
Note : Labour is Considered for 10 jobs /
day

34 Labour Charges
12 Labour charges for Fixing of Ceiling fan and regulator including transportation and giving
connections with twin core wire etc., complete.
a) Material
elec-1.6.8 23/0060 Twin Core wire M 1 10.40 10.40
Unforseen item works, such as painting to LS 1 3.00 3.00
down rod, screws etc.,
13.40
Add contr profit @14% on material 0.00 0.00
Total for material 13.40
b) Labour charges.
elec-8.1.77 Skilled Electrician day 0.125 515.00 64.38
elec-8.1.85 Helper day 0.125 400.00 50.00
Add area allowence on labour charges @ 0% 0.00

Add contr profit @14% on Labour 0% 114.38 0.00

Rate per Each 127.80

El Data old P No 202

 Index Specific Description Unit QTY Rate Rs. Amount Rs. ohr
-code ation No.
1 2 3 4 5 6 7
Note : Labour is Considered for 8 fans / day

,Executive Engineer Deputy Executive ,Assistant Engineer

,A.P.E.W.I.D.Corporation ,Engineer ,A.P.E.W.I.D.Corporation
.N E L L O R E A.P.E.W.I.D.Corpor .NELLORE
,ation
South Sub-
,Division
.N E L L O R E
Exe.Engineer Dy.Exe.Engineer Asst.Engineer
APEWIDC, Chittoor APEWIDC, Madanapalli APEWIDC, Madanapalli

El Data old P No 203

 DOORS DATA

Name of the work : Improving Infrastructure Facilities to Govt.Polytechnic at

Srikakulam (V&M) in Srikakulam District
Under Nadu - Nedu
1 Supply and Fixing of 18guage MS Plain sheet Door of size 1.22 x 2.13 mts with
outer angular frame of rolled steel equal angle 40 x 40 x 6m and inner shutter
angular frame rolled steel equal angle 32 x 32 x 4 mm with Double leaf shutter,MS
Flats 25x5mm-6Nos for Horizontal ( 3 Nos for each shutter )to the Door MS Aldrop
300 mm long-2No , MS Tower bolt 150mm long-2Nos,MS Hinges 150mm long-
6Nos. MS 125mm Handles- 2 No and 6 Nos of MS Hold fasts 230mm long with
primary coat of Red oxide paint including cost,conveyance of all materials to site
,sales and other taxes on all materials and labour charges etc complete.

Area 1.22 x 2.13 2.60 Sqm

(A) Outer Angle Frame 40 x 40 x 6mm

Horizontal 1 x 2 1.22 2.44

Vertical 1 x 2 2.13 4.26
Hold fasts 1 x 6 0.23 1.38
8.08
Weight 8.08 3.50 Kg/1Rm 28.28 Kg
(B) Inner angle frame 32 x 32 x 4 mm

Horizontal 1 x 2 1.17 2.34

Vertical 1 x 4 2.08 8.32
10.66
Weight 10.66 2.50 26.65 Kg
Total 54.93 Kg
0.00 Kg
Total (A) + (B) 54.93 Kg

(c) 25X 5 mm Flat

1 x 6 0.55 3.30
Weight at 0.98 kg/rm 3.23 Kg
Total 3.23 Kg
0.00 Kg
Total (C) 3.23 Kg

(D) 18 Guage MS Sheet 1 x 2 0.59 2.08

Weight of the Sheet 2.45 9.80 Kg/1sqm 24.05 Kg

 0.00 Kg
24.05 Kg

DATA
54.93 Kg Cost of Angular 35.57 1 Kg 1953.63
3.23 Kg Cost of Flats (C) 36.57 1 Kg 118.25
24.05 Kg Cost of 18 Gauge MS Sheet 40.07 1 Kg 963.71
82.22 Kg Fabrication Charges BMM-V.14 24.00 1 Kg 1973.21
82.22 Kg Fixing Charges BMM-V.15 4.00 1 Kg 328.87
2 No. MS Aldrop 300mm long (BMT-G.45) 181.00 1 No. 362.00
2 Nos. MS Tower Blt 150mm long ( BMT-G.15) 38.00 1 No. 76.00
6 Nos. MS Hinges 150mm long (BMT-G.30) 44.00 1 No. 264.00
2 Nos. MS Handle 125mm long (BMT-G.35) 34.00 1 No. 68.00
5.20 sqm Cost of Red Oxide Painting 38.83 1 sqm 201.81
Total 6309.48
Add Overheads & Contractors Profit @13.615% 0.000% 315.47
Rate of Door 6624.95
Say 6625.00

2 Supply and Fixing of 18guage MS Plain sheet Door of size 1.00 x 2.13 mts with
outer angular frame of rolled steel equal angle 40 x 40 x 6m and inner shutter
angular frame rolled steel equal angle 35 x 35 x 5 mm with Double leaf shutter,MS
Flats 25x5mm-6Nos for Horizontal to the Door MS Aldrop 300 mm long-2No MS
Tower bolt 150mm long-2Nos,MS Hinges 150mm long-6Nos. MS 125mm Handle- 2
No and 6 Nos of MS Hold fasts 230mm long with primary coat of Red oxide paint
including cost,conveyance of all materials to site ,sales and other taxes on all
materials and labour charges etc complete

Area 1.00 x 2.13 2.13 Sqm

(A) Outer Angle Frame 40 x 40 x 6mm

Horizontal 1 x 2 1.00 2.00

Vertical 1 x 2 2.13 4.26
Hold fasts 1 x 6 0.23 1.38
7.64
Weight 7.64 3.50 Kg/1Rm 26.74 Kg

(B) Inner angle frame 35 x 35 x 5 mm

Horizontal 1 x 2 0.97 1.94

Vertical 1 x 4 2.08 8.32
 10.26
Weight 10.26 2.60 Kg/1Rm 26.68 Kg
Total 53.42 Kg
0.00 Kg
Total (A) + (B) 53.42 Kg

(C) 25X 5 mm Flat

1 x 6 0.48 2.88
Weight 2.88 at 0.98 kg/rm 2.82 Kg
Total 2.82 Kg
0.00 Kg
Total (C) 2.82 Kg

(D) 18 Guage MS Sheet 1 x 1 0.97 2.08

Weight of the Sheet 2.02 9.8 19.80 Kg

0.00 Kg
19.80 Kg

DATA
53.42 Kg Cost of Angular 35.57 1 Kg 1899.78
2.82 Kg Cost of Flats (C) 36.57 1 Kg 103.20
19.80 Kg Cost of 18 Gauge MS Sheet 40.07 1 Kg 793.14
76.03 Kg Fabrication Charges BMM-V.14 24.00 1 Kg 1824.83
76.03 Kg Fixing Charges BMM-V.15 4.00 1 Kg 304.14
2 No. MS Aldrop 300mm long (BMT-G.45) 181.00 1 No. 362.00
2 Nos. MS Tower Blt 150mm long ( BMT-G.15) 38.00 1 No. 76.00
6 Nos. MS Hinges 150mm long (BMT-G.30) 44.00 1 No. 264.00
2 Nos. MS Handle 125mm long (BMT-G.35) 34.00 1 No. 68.00
4.26 sqm Cost of Red Oxide Painting 38.83 1 sqm 165.42
Total 5860.51
Add Overheads & Contractors Profit @13.615% 0.000% 293.03
Rate of Door 6153.53
Say 6153.55

Assistant Engineer Dy. Executive Engineer Executive Engineer

APEWIDC, Srikakulam APEWIDC,Srikakulam APEWIDC,Srikakulam
 WINDOWS DATA
Name of the work : Improving Infrastructure Facilities to Govt.Polytechnic at Srikakulam
(V&M) in Srikakulam District
Under Nadu - Nedu
1 Supply and fixing of 18 guage M.S. Plain Sheet WINDOW of size 1.52 M x 1.22 M (Six Leafs
shutters with outer angular frame of rolled steel equal angle ISA 4040 of Size 40mm x
40mm x 6mm and inner shutter angular frame of rolled steel equal angle ISA 2525 of size
25mm x 25mm x 4mm and rolled steel Tee Bars 40mm x 40mm x 6mm and 25x5mm flat ,
1 Nos. Horizontal, 2 Nos. verticles also bended with fixtures such as M.S. Powder coated
tower bolts 100mm long 6 Nos., M.S. Powder coated butt Hinges 12 Nos., M.S. Powder
coated handles 125mm long 6 Nos., and safety rods 10mm MS square rods at 10 Nos
welded horizontally to full width of window & 4 Nos of MS Hold fasts of 230mm long
including redoxide primer grade I quality coating including cost and conveynace of all
materials, labour charges etc., complete for finished item of work.

Area 1.52 x 1.22

Theoritical Requirement of Materials
(A) Outer frame 40 x 40 x 6mm
Verticals (L angle) 2 x 1.22 2.44
Verticals (T Section) 2 x 1.22 2.44
Horizontal (L angle) 2 x 1.52 3.04
Horizontal (T angle) 1 x 1.52 1.52
Hold fasts 4 x 0.23 0.92
10.36
x 3.50
10.36 Kg/1Rm

(B) Inner angle frame 25 x 25 x 4 mm

Verticals 12 x 0.59 7.08
Horizontals 12 x 0.48 5.76
12.84
12.84 x 1.40 Kg/1Rm

(C) 10 mm Square Safety rods

Safety Rods 10 x 1.5
Equivalent weight (0.78 Kg/ Rmt.)
Total Weight 15.00 x 0.780 Kg/1Rm

Total ( A to C )

Total ( A to C )

(D) 25x5mm MS flat

6 x 0.47 2.82
 2.82
Weight 2.82 x 0.98

Total (D)

(E) 18 Guage MS Sheet 3 0.48 1.18 1.70 Sqm

Area of Sheet (3 x 0.48 x 1.18)
Equivalent (9.80 Kg per Sqm.)
Total Weight 1.70 x 9.80 Kg/1sqm

DATA
65.94 Kg Cost of angle ( A to C) 35.57 1 Kg
2.76 Kg Cost of Flats (D) 36.57 1 Kg
16.65 Kg Cost of 18 Gauge MS Sheet (E) 40.07 1 Kg
85.35 Kg Fabrication Charges BMM-V.14 24.00 1 Kg
85.35 Kg Fixing Charges BMM-V.15 4.00 1 Kg
3.71 sqm Cost of Red Oxide Painting 38.83 1 sqm
6 Nos. MS Tower Bolts 100mm long (BMT-G.14) 26.00 1 No.
12 Nos. MS Butt Hinges 100mm long (BMT-G.28) 23.00 1 No.
6 Nos. MS Handle 125mm long (BMT-G.35) 34.00 1 No.
6 Nos. MS Wind appliances 20.00 1 No.
Total
Add Overheads & Contractors Profit @13.615% 0.000%
Rate of Door
Say

2 Supply and Fixing of M.S. Iron Grill Gate of size 35 mm x 35mm x 6mmwith
10mm Square rods 100mm including Cost and conveyance of all materials,
welding, fabrication of charges and sales and other taxes etc., complete for finished
item of work.
1.05 Kg 10mm Square Safety Rods 44.05 1 Kg
3.05 Kg Fabrication Charges BMM-V.14 24.00 1 Kg
3.05 Kg Fixing Charges BMM-V.15 4.00 1 Kg
Total

Add Overheads & Contractors Profit @13.615% 0.000%

Say
Assistant Engineer Dy. Executive Engineer Executive Engineer
APEWIDC, Srikakulam APEWIDC,Srikakulam APEWIDC,Srikakulam
echnic at Srikakulam

52 M x 1.22 M (Six Leafs

040 of Size 40mm x
angle ISA 2525 of size
6mm and 25x5mm flat ,
s M.S. Powder coated
2 Nos., M.S. Powder
are rods at 10 Nos
ts of 230mm long
d conveynace of all

1.85

36.26 Kg

17.98 Kg

11.70 Kg
65.94 Kg
0.00 Kg
65.94 Kg
 2.76 Kg
0.00 Kg
2.76 Kg

16.65 Kg
0.00 Kg
16.65 Kg

2345.07
101.05
667.18
2048.44
341.41
144.01
156.00
276.00
204.00
120.00
6403.16
0.00
6403.16
6403.20

mm x 6mmwith
of all materials,
, complete for finished

46.25
73.20
12.20
131.65
131.65
0.00
131.65
 Executive Engineer
WIDC,Srikakulam
 DATAS FOR MS Ventilators

Name of the work : Improving Infrastructure Facilities to Govt.Polytechnic at Srikakulam (V&M) in

Srikakulam District
Under Nadu - Nedu

Sno Qty Description of Item Rate Unit Per

1 Supply and Fixing of Ventilator of size 1.22 x 0.30 with 25mm x 25mm x 3mm thick equal L
angles and 10mm square rods @ 150mm c/c fixing in position ,complete for finsihed item of work

VENTILATOR SIZE 1.20 x 0.30 mtrs : 1.22 X 0.3

Area = 0.36
Angular sqm
frame 25 x 25 x 3mm thick
Verticals 1 x 2 x 0.294 = 0.59 m
Horizental 1 x2 x 1.20 = 2.40 m
For Hold fasts 1 x 2 x 0.15 = 0.30
Total 3.29 m 3.6168
=
10 mm square rods @ 150 mm c/c
Verticals 1 x 7 x 0.294 = 2.06
Horizental 1 x2 x 1.194 = 2.39
total 4.45 m 3.46788
ABSTRACT
a)MATERIAL
7.08 Cost of Structural Steel 35.57 1 Cum
a) LABOUR
7.08 Fabrication Charges ( BMM-V.14) 24.00 1 Kg
7.08 Fixing Charges ( BNN-V.15) 4.00 1 Kg

Add overheads @ 5%
Rate per / Each

2 Supply and Fixing of Ventilator of size 1.52 x 0.30 with 25mm x 25mm x 3mm thick equal L
angles and 10mm square rods @ 150mm c/c fixing in position ,complete for finsihed item of work

VENTILATOR SIZE 1.50 x 0.30 mtrs : 1.52 X 0.3

Area = 0.46
Angular sqm
frame 25 x 25 x 3mm thick
Verticals 1 x 2 x 0.294 = 0.59 m
Horizental 1 x2 x 1.50 = 3.00 m
For Hold fasts 1 x 2 x 0.15 = 0.30
Total 3.89 m 4.2768
=
10 mm square rods @ 150 mm c/c
Verticals 1 x 9 x 0.294 = 2.65
Horizental 1 x 2 x 1.494 = 2.99
 total 5.63 m 4.39452
ABSTRACT
a)MATERIAL
8.67 Cost of Structural Steel 35.57 1 Cum
a) LABOUR
8.67 Fabrication Charges ( BMM-V.14) 24.00 1 Kg
8.67 Fixing Charges ( BNN-V.15) 4.00 1 Kg

Add overheads @ 5%
Rate per / Each

5 Supply and Fixing of Ventilator of size 1.00 x 0.3 with 25mm x 25mm x 3mm thick equal L
angles and 10mm square rods @ 150mm c/c fixing in position ,complete for finsihed item of work

VENTILATOR SIZE 1.00 x 0.3 mtrs : 1.00 X 0.3

Area = 0.30
Angular frame 25 x 25 x 3mm thick
Verticals 1 x 2 x 0.294 = 0.59 m
Horizental 1 x2 x 1.00 = 2.00 m
For Hold fasts 1 x 2 x 0.15 = 0.30
Total 2.89 m 3.1768
=

10 mm square rods @ 150 mm c/c

Verticals 1 x 6 x 0.294 = 1.76
Horizental 1 x2 x 0.994 = 1.99
total 3.75 m 2.92656
ABSTRACT
a)MATERIAL
6.10 Cost of Structural Steel 35.57 1 Cum
a) LABOUR
6.10 Fabrication Charges 24.00 1 Kg
6.10 Fixing Charges 4.00 1 Kg

Add overheads @ 5%
Rate per / Each

3 Supply and Fixing of Ventilator of size 1.20 x 1.20 with 25mm x 25mm x 5mm thick equal L
angles and 10mm square rods @ 150mm c/c fixing in position ,complete for finsihed item of work

Grill SIZE 1.20 x 1.20 mtrs : Area = 1.2 X 1.2

1.44 sqm
Angular frame 25 x 25 x 5mm thick
Verticals 1 x 2 x 1.20 = 2.40 m
Horizental 1 x2 x 1.20 = 2.40 m
 For Hold fasts 2 x 2 x 0.15 = 0.60
Total 5.40 m 9.72
=
10 mm square rods @ 150 mm c/c
Verticals 1 x 7 x 1.200 = 8.40
Horizental 1 x 7 x 1.20 = 8.40
total 16.80 m 13.188
ABSTRACT
a)MATERIAL
22.91 Cost of Structural Steel 35.57 1 Cum
a) LABOUR
22.91 Fabrication Charges ( BMM-V.14) 24.00 1 Kg
22.91 Fixing Charges ( BNN-V.15) 4.00 1 Kg

Add overheads @ 5%
Rate per / Each

12 Supply and fixing of MS grill Window of .9X 1.35 mts by using 40 x40 x
6mm MS Angle section for outer frame and 10 mm square safety bars @
100 mm C/C both ways including cost & conveyance of all materials and
labour charges for finished item of work

Frame 40x40x6 mm (GW)

Verticals 2 x 1.35 2.7
Harizontal 2 x .9 1.8
4.5 3.5 15.75
10 mm SQ rod@ 100c/c
Verticals 8 x 1.32 10.56
Harizontal 12x .9 10.8
21.36 0.78 16.6608
MS Aldrop,Tower Bolt and Holdfast 0.55
total weight 32.9608
Rate analysis
cost of MS steel 32.96 33.57
Fabrication charges BMM -V-14 32.96 24.00
Fixing Charges BMM -V-15 32.96 #REF!
Over Head Charges #REF! 0.13615

Say
9 Supply and fixing of MS grill Window of 1.5X 1.35 mts by using 40 x40 x
6mm MS Angle section for outer frame and 10 mm square safety bars @
100 mm C/C both ways including cost & conveyance of all materials and
labour charges for finished item of work

Frame 40x40x6 mm (GW)

Verticals 2 x 1.35 2.7
Harizontal 2 x 1.5 3
5.7 3.5 19.95
10 mm SQ rod@ 100c/c
Verticals 14 x 1.32 18.48
Harizontal 12x 1.5 18
36.48 0.78 28.4544
MS Aldrop,Tower Bolt and Holdfast 0.25
total weight 48.6544
Rate analysis
cost of MS steel 48.65 33.57
Fabrication charges BMM -V-14 48.65 24.00
Fixing Charges BMM -V-15 48.65 #REF!
Over Head Charges #REF! 0.1362

Say

9 Supply and fixing of MS grill Window of 1.2X 1.35 mts by using 40 x40 x
6mm MS Angle section for outer frame and 10 mm square safety bars @
100 mm C/C both ways including cost & conveyance of all materials and
labour charges for finished item of work

Frame 40x40x6 mm (GW)

Verticals 2 x 1.35 2.7
Harizontal 2 x 1.2 2.4
5.1 3.5 17.85
10 mm SQ rod@ 100c/c
Verticals 11 x 1.32 14.52
Harizontal 12*1.2 14.4
28.92 0.78 22.5576
MS Aldrop,Tower Bolt and Holdfast 0.55
total weight 40.9576
Rate analysis
cost of MS steel 40.96 33.57
Fabrication charges BMM -V-14 40.96 24.00
Fixing Charges BMM -V-15 40.96 #REF!
Over Head Charges #REF! 0.13615
 Say

9 Supply and fixing of MS grill Window of 2.1 x1.35 mts by using 40 x40 x
6mm
FrameMS Angle mm
40x40x6 section for outer frame and 10 mm square safety bars @
(GW)
100 mm C/C both ways including cost & conveyance of all materials and
Verticals 2 x 1.35
labour charges for finished item of work 2.7
Harizontal 2 x 2.1 4.2
6.9 3.5 24.15
10 mm SQ rod@ 100c/c
Verticals 20 x 1.32 15.84
Harizontal 12x 2.07 43.47
59.31 0.78 46.2618
MS Aldrop,Tower Bolt and Holdfast 0.55
total weight 70.9618
Rate analysis
cost of MS steel 70.96 33.57
Fabrication charges BMM -V-14 70.96 24.00
Fixing Charges BMM -V-15 70.96 #REF!
Over Head Charges #REF! 0.13615

Say
 rikakulam (V&M) in

Amount

mm thick equal L
r finsihed item of work

0.37

Kgs

Kgs

251.97

170.03
28.34
450.34
22.52
472.90

mm thick equal L
r finsihed item of work

0.46

Kgs
 Kgs

308.40

208.11
34.69
551.20
27.56
578.80

m thick equal L
r finsihed item of work

0.3

Kgs

Kgs

217.07

146.48
24.41
387.96
19.40
407.40

mm thick equal L
r finsihed item of work

1.44
 Kgs

Kgs

814.74

549.79
91.63
1456.16
72.81
1529.00

1106.49
791.06
#REF!
#REF!
#REF!
#REF!
1633.33
1167.71
#REF!
#REF!
#REF!
#REF!

1374.95
982.98
#REF!
#REF!
 #REF!
#REF!

2382.19
1703.08
#REF!
#REF!
#REF!
#REF!